Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 157 Friday, March 27, 2009 11:08 AM

Deburring tools - Files

Files - Grinding tools

FILES - GRINDING

3

Deburring tools - Files Scrapers (polishing steel) Triangular Scraper (polishing steel)

"Noga" Mini scraper with telescopic extendable scraper holder. Supplied with three square, hollow ground scraper of HSS. Art. no. 3154 -1303 Noga type NG3700 Blade length mm 21 Cutting width mm 3.2 Total length mm 260 Pack. qty 1 Loose scraper HSS 3154 -1709 Noga type D50-BD5010 Blade length mm 21 Cutting width mm 3.2 Pack. qty 10 Loose scraper tungsten carbide 3154 -2616 Noga type D50-BD5010 Blade length mm 21 Cutting width mm 3.2 Pack. qty 1

Scraper (polishing steel)

"Noga" Scraper with telescopic extendable and double sided scraper in aluminium holder. Supplied with three square double sided, hollow ground scraper of special steel. Also available in tungsten carbide. Art. no. 3154 -2400 Noga type SC-8000 Blade length mm 19 Cutting width mm 2.5 Pack. qty 1 Loose double sided scraper of special steel 3154 -2517 Noga type T80-BT8001 Blade length mm 19 Cutting width mm 2.5 Pack. qty 1 Loose single-sided scraper of tungsten carbide 3154 -2616 Noga type D55-BD5501 Blade length mm 21 Cutting width mm 3.2 Pack. qty 1

157

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 158 Friday, March 27, 2009 11:08 AM

Deburring tools - Files Scraper

Files - Grinding tools

3

"Noga" Triangular scraper made of alloy steel with telescopic extendable holder. Art. no. 13839 Noga type Cutting length mm Cutting width mm Pack. qty Loose scraper made of alloy steel 13839 Noga type Cutting length mm Cutting width mm Pack. qty

-0109 NG3600 70 4.5 1 -0208 T70 - BT7000 70 4.5 1

Scraper (polishing steel)

With triangular flat ground blade. Plastic covered handle. Art. no. 1653 Cutting length mm Cutting width mm Total length mm Pack. qty

-0107 35 6 130 10

Scraper (polishing steel)

With triangular, flat ground blade. Of special steel Wooden handle. Art. no. 1655 Cutting length mm Cutting width mm Blade length mm Pack. qty

-0204 150 14 150 12

Scraper (polishing steel)

With triangular, hollow ground blade. Of special steel Wooden handle. Art. no. 1656 Cutting length mm Cutting width mm Blade length mm Pack. qty

-0203 150 14 150 12

Internal scrapers Scraper (polishing steel)

"Noga" Scraper with telescopic extendable scraper of HSS. For internal deburring e.g. rear of holes. Art. no. 3154 -1402 Noga type IS-1000 Blade length mm 4.5 Cutting width mm 2.9 Total length mm 260 Pack. qty 1 Loose scraper of HSS 3154 -1808 Noga type D66-BD6610 Blade length mm 4.5 Cutting width mm 2.9 Pack. qty 10

Internal scraper

With triangular, curved, hollow ground blade. Of special steel Wooden handle. Art. no. 1658 -0201 Cutting length mm 70 Cutting width mm 15 Blade length mm 150 Pack. qty 12

Flat scrapers Flat scraper

Flat. Of special steel Wooden handle. Art. no. 1662 Length without handle mm Cutting width mm Pack. qty

158

-0304 200 20 12

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 159 Friday, March 27, 2009 11:08 AM

Deburring tools - Files Flat. With tungsten-carbide blade (H 20). Wooden handle. Art. no. 1663 -0055 Length without handle mm 200 Cutting width mm 15 Pack. qty 1

-0105 220 20 1

-0204 250 25 1

-0303 300 30 1

Deburring tools Deburring tool

"Noga" With replaceable large high speed steel blades for different deburring. Blades are swivel mounted in the handle and automatically adapt to the shape of the work piece. For pipe, holes, edges, etc. Brochure on request 9999-1390. Art. no. 6598 -0104 -0500 Noga type Noga-Burr 3NG1003 Noga-Burr 5NG1005 With blades type S10, S20, S35 S10, S20, S35, S101, S202 (small hole) Pack. qty 1 1 S10/E100-BS1010. HSS. For steel, aluminium and plastic 6598 -0203 Pack. qty 10 S10LH/E100LH-BS1010. HSS. Ditto for left-hand 6598 -0229 Pack. qty 10 S100-BS1018. HSSCO. For stainless steel 6598 -0245 Pack. qty 10 S10/E100-BS1012. HSS-TIN. For hard wearing material 6598 -0609 Pack. qty 10 S101-BK1010. HSS. For small holes in steel, aluminium and plastic 6598 -0252 Pack. qty 10 S101-BK1012. HSS-TIN-coated for hard wearing material 6598 -0294 Pack. qty 10 S150-BK3010. HSS. For very small holes from 1.5 mm. 65980 -286 Pack. S20/E200-BS2010. HSS. For brass and cast iron (polished) 6598 -0302 Pack. qty 10 S202-BK2010. HSS. For small holes in brass and cast iron (polished) 6598 -0351 Pack. qty 10 S30/E300-BS3010. HSS. For all internal and externaldeburring of holes 6598 -0377 in different materials Pack. S35/E350-BS3510. HSS. For straight edges ondifferent materials Pack. S60/E600-BS6001. HSS. For deburring "the back"of holes and edges Pack.

qty 6598 qty 6598 qty

Files - Grinding tools

Flat scraper

3

10 -0401 10 -0468 1

Deburring tool

"Noga" For tougher deburring jobs. Telescopic extendable (30-115 mm) blade holder for large blades. The blades are swivel-mounted in the blade holder and automatically adapt to the shape of the work piece. For pipes, holes, edges, etc. Supplied with two replaceable high speed steel blades S20 and S30. Other large blades (art. no. 6598-) also fit. Art. no. 13837 -0101 Noga type Super-BurrNG3003 Pack. qty 1

Deburring tool

"Noga" Universal deburring tool with telescopic extendable (20-100 mm) blade holder for small blades. Blades are swivel mounted in the blade holder and automatically adapt to the shape of the workpiece. For pipes, holes, edges, etc. Supplied with two replaceable high speed steel blades B10 and B20. Also larger blades S10, S20, S30, S35, S60, S101 and S202 are suitable. Brochure on request 9999-1390. Art. no. 3154 -0107 Noga type Liza-BurrLB1000 Pack. qty 1

Deburring tool

"Noga" With replaceable, swivel blade, (S10/E100), mounted in an aluminium handle. The blade automatically adapts to the shape of the workpiece. For pipe, edges, holes, etc. All S/E blades (art. no. 6598) fit in this handle. Brochure on request 9999-1390. Art. no. 4254 -0104 Noga type Rapid-BurrRB1000 Pack. qty 1

Thread cleaning tool

"Noga" For clearing damaged or blocked female threads. Minimum hole diameter 9 mm. Art. no. 4054 -0106 Noga type NG1600 Total length mm 150 Pack. qty 1 159

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 160 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Deburring tools - Files Deburring tool

"Noga" For deburring two edges in one operation. Blades can be variably adjusted for thicknesses up to 10 mm and rotated to obtain the greatest possible life. Plastic handle with finger protection. Supplied complete with two replaceable, double sided blades of high speed steel. Deburring tool 9759 -0103 Noga type Double-BurrDB1000 Pack. qty 1 Blade N-80 HSS 9759 -0202 Noga typ BN8010 Pack. qty 10 Blade N80M42 HSSCO For stainless steel 9759 -0301 Noga typ BN8043 Pack. qty 10

Deburring tool

"Noga" With replaceable small high speed steel blades for different deburring. Blades are swivel mounted in the handle and automatically adapt to the shape of the workpiece. For pipe, holes, edges, etc. Supplied with two replaceable high speed steel blades N1 and N2. Art. no. 13838 -0100 Noga type Magic-BurrNG2002 Pack. qty 1 Knives N1/B10 HSS. For steel, aluminium and plastic 3154 -0404 Noga type BN1010 Pack. qty 10 N1/B10. HSS-TIN. For hard wearing material 3154 -1501 Noga type BN1012 Pack. qty 10 N2/B20 HSS. For brass and cast iron 3154 -0503 Noga type BN2010 Pack. qty 10 N3/B30 HSS. For simultaneous inside and outside deburring of holes in dif- 3154 -0602 ferent materials Noga type BN3010 Pack. qty 10

Deburring tool

"Noga" For deburring the back and front of holes. Steel holder (RC2200 aluminium) and HSS blade. Supplied with blade. Art. no. 12800 -0106 -0205 -0304 Noga type RC1000 RC2000 RC2200 Pack. qty 1 1 1 Knives Art. no. 12800 -1005 -1104 -1203 Noga type R1/BR1001 R2/BR2001 R3/BR3001 Pack. qty 10 10 10

Deburring tool

"Noga" The countersink head pivots in the handle. Supplied with 1-10.4 mm HSS countersink heads. Art. no. 12801 -0105 Noga type NG1200 Pack. qty 1 Countersink heads 0-3.2 mm HSS 12801 -0204 Noga type RD3.2 BC3201 Pack. qty 20 Countersink heads 1-6.3 mm HSS 12801 -0303 Noga type RD6.3 BC6301 Pack. qty 20 Countersink heads 1-8.3 mm HSS 12801 -0402 Noga type RD8.3 BC8301 Pack. qty 20 Countersink heads 1-10.4 mm HSSCountersink heads 1-10.4 mm HSS 12801 -0501 Noga type RD10.4 BC1041 Pack. qty 20 Countersink heads 1-16.5 mm HSS 12801 -0600 Noga type RD16.5 BC1651 Pack. qty 20 Blade for external deburring of roundpipes, rods etc. 4-18 mm diameter. 12801 -0709 Noga type EX18 - EX2001 Pack. qty 20

160

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 161 Friday, March 27, 2009 11:08 AM

Deburring tools - Files "Noga" Countersink with telescopic extendable (6-80 mm) countersink holder. For deburring deep set holes. With extensible countersink head. Supplied with Ø 20 mm countersink heads of HSS. Art. no. 3154 -1105 Noga type NG3100 Pack. qty 1 Countersink head Ø 12 mm HSS 3154 -0800 Noga type C12-BC1211 Pack. qty 1 Countersink head Ø 20 mm HSS 3154 -0909 Noga type C20-BC2011 Pack. qty 1 Countersink head Ø 30 mm HSS 3154 -1600 Noga type C30-BC3011 Pack. qty 1

Files - Grinding tools

Deburring tool (countersink)

3

Sets Set of deburring tools

"Noga" Sets of deburring tools for different types of deburring jobs. BRONZE UNIKIT. The set consists of two telescopic holders for small and large blades, a telescopic holder including a 20 mm countersink, a telescopic holder including a mini-scraper, two small N1 and N2 blades and 4 large S10, S20, S30 and S150 blades. GOLD BOX. The set consists of a handle, two telescopic holders for small and large blades, a telescopic holder including a 20 mm countersink, a telescopic handle including a mini-scraper, a telescopic holder including a keyway blade, an internal scraper, a 10.4 mm countersink head, an SC8000 scraper, two small N1 and N2 blades and 4 large S10, S20, S30 and S150 blades. Art. no. 13840 -0106 -0205 Noga type Bronze UnikitNG9200 Gold BoxNG9400 Pack. qty 1 1

Hand files Needle files Needle file

"Nicholson" Double cut. Round handle. For fine filing, e.g. precision tool makers, instrument makers, goldsmiths, etc. Type Length DimenSec (Second cut 0) S (Smooth 2) sion Art. no. Pack. Art. no. Pack. mm mm 7000 qty 7000 qty Hand file 160 5.5×1.4 -0104 12 -1102 12 Flat 160 5.5×1.4 -0203 12 -1201 12 Three square file 160 3.7×3.3 -0302 12 -1300 12 Square 160 2.5×2.5 -0401 12 -1409 12 Half round 160 5.5×1.8 -0500 12 -1508 12 Tumbler file 160 5.5×2.2 -0609 12 -1607 12 Round 160 2.9 -0708 12 -1706 12 Hack file 160 5.5×1.8/0.7 -0807 12 -1805 12

Needle file DIY

"Nicholson" DIY-pack. Double cut. Round handle. For fine filing, e.g. precision tool makers, instrument makers, goldsmiths, etc. Type Length DimenSec (Second cut 0) S (Smooth 2) sion Art. no. Pack. Art. no. Pack. mm mm 7000 qty 7000 qty Hand file 160 5.5×14 -1904 1 -2704 1 Flat 160 5.5×14 -2001 1 -2803 1 Three square file 160 3.7×33 -2100 1 -2902 1 Square 160 2.5×2.5 -2209 1 -3009 1 Half round 160 5.5×18 -2308 1 -3108 1 Tumbler file 160 5.5×22 -2407 1 -3207 1 Round 160 2.9 -2506 1 -3306 1 Hack file 160 5.5×1.8/0.7 -2605 1 -3405 1

161

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 162 Friday, March 27, 2009 11:08 AM

Deburring tools - Files Needle file

Files - Grinding tools

3

"Nicholson" Graded sets in plastic case. Contains needle files no 7000. Smooth. No 7001-0103 contain one of the following: square, round, half round, three square file, hand file and flat. No 7001-0202 contains the following: hack file, 2 x half round, tumbler file, three square file, warding file, flat, barette file, edge cut flat file, round, square and saw file. Art. no. 7001 -0103 -0202 No. of files 6 12 Length mm 160 160 Pack. set 1 1

Set of needle files

"Teng Tools" Set of 12 different needle files - flat, half round, three square, square, round, warding, knife, barette, hand, oval, spring and double half round shape. Fine. Supplied in plastic insert tray. Fits in Teng Tools tool boxes and tool trolleys. Art. no. 12843 -0105 Teng Tools No TTNF12 No of needle files ea. 12 Length mm 163 Case size LxWxH mm 265x142x50 Weight kg 0.47 Pack. set 1

Contact files Contact file

"Nicholson" Short. Uniform width, with uncut edges. Double cut. For polishing contacts and contact breakers, etc. Length DimenStandard 2-pack sions Art. no. Pack. Art. no. Pack. mm mm 7002 qty 7002 135 8×1 -0102 12 -0201 6

Contact file

"Teng Tools" Short. Uniform width, with uncut edges. Double cut. For polishing contacts and contact breakers. Art. no. 12841 -0107 Teng Tools No FLIP05 Length mm 110 Dimensions mm 6.35x1 Pack. qty 10

File sets File set

"Nicholson" File sets with 5 different handled files, round, half round, three square, square and flat. All second and double cut. Art. no. 4185 -0108 -0207 Nicholson No NFK 1 NFK 2 Length inch 8 10 Length mm 200 250 Pack. qty 1 1

Precision files Precision file

"Nicholson" Set of six files. Consisting of the following files: warding, three square, round, square, hand and half round. Double cut. Smooth. With wooden handle. In plastic case. Art. no. 7003 -0101 No. of files 6 Length mm 100 No. of sets per pack. 12

Hand files Hand file

"Nicholson" Magicut. Handled. All round engineering file. For filing flat surfaces as well as sharp corners and recesses in soft and hard materials. Bastard, single cut with wave shaped chip breaking flutes. Gives good removal but also a fine finish. Art. no. 7040 -0106 -0205 Length inch 8 10 Length mm 200 250 Dimensions mm 20×5 24.5×6.5 Pack. qty 6 6 162

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 163 Friday, March 27, 2009 11:08 AM

Deburring tools - Files "Nicholson" Handled. All round engineering file. For filing flat as well as sharp corners or recesses. Double cut. One uncut edge. Parallel width and thickness. Length Length DimenBast Sec. cut F sions Art. no. Pack. Art. no. Pack. Art. no. Pack. inch mm mm 7039 qty 7039 qty 7039 qty 6 150 16×4 -0109 6 -0505 6 -0901 6 8 200 20×5 -0208 6 -0604 6 -1008 6 10 250 24.5×6.5 -0307 6 -0703 6 -1107 6 12 300 29.5×7 -0406 6 -0802 6 -1206 6

Hand file

"Teng Tools" Handled. All round engineering file. For filing flat as well as sharp corners or shoulders. Medium coarse - double cut on both sides. Parallel thickness and width. Art. no. 12849 -0109 Teng Tools No FLHF10 Length inch / mm 10 / 250 Dimensions mm 24.5x6.15 Pack. set 20

Files - Grinding tools

Hand file

3

Flat files Flat file

"Teng Tools" Handled. Medium coarse. Double cut on both sides - single cut on the edges. Working area as a flat file but with greater accessibility on account of the tapered shape. Art. no. 12840 -0108 Teng Tools No FLFT10 Length inch / mm 10 / 250 Dimensions mm 24.5x6.35 Pack. qty 20

Warding files Warding file

"Nicholson" Handled. Double cut on both sides - single cut on edges. Parallel thickness. Tapered. For slots, rectangular holes and corners, etc. Length Length DimenBast Sec. cut sions Art. no. Pack. Art. no. Pack. inch mm mm 7041 qty 7041 qty 6 150 16×2 -0055 6 -0105 6

Three square files Three square file

"Nicholson" Handled. Double cut sides - uncut edge top. Intended for processing internal corners, angles and slots, etc. Also suitable for flat filing. Length Length DimenBast Sec. cut sions Art. no. Pack. Art. no. Pack. inch mm mm 0727 qty 0727 qty 6 150 12 -0101 6 -0200 6

Three square file

"Teng Tools" Handled. Medium coarse. Double cut sides - uncut edge top. Intended for processing internal corners, angles and slots, etc. Also suitable for face filing. Art. no. 12855 -0100 Teng Tools No FLtr10 Length inch / mm 10 / 250 Dimensions mm 15.6 Pack. set 10

Square files Square files

"Nicholson" Handled. Double cut. All four edges cut. Used for filing slots, rectangular holes and inside corners as well as for tool adjustment. Length Length DimenBast Sec. cut sions Art. no. Pack. Art. no. Pack. inch mm mm 7043 qty 7043 qty 6 150 6.5 -0103 6 -0400 6 8 200 8 -0202 6 -0509 6 10 250 9.5 -0301 6 -0608 6 163

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 164 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Deburring tools - Files Square file

"Teng Tools" Handled. Double cut - medium coarse. All four edges cut. Used for filing slots, rectangular holes and inside corners as well as for tool adjustment. Art. no. 12854 -0101 Teng Tools No FLSQ10 Length inch / mm 10 / 250 Dimensions mm 9 Pack. set 10

Half round files Half round file

"Nicholson" Handled. Double cut. Cut all round. For processing concave and flat surfaces as well as large holes. Length Length DimenBast Sec. cut sions Art. no. Pack. Art. no. Pack. inch mm mm 7042 qty 7042 qty 6 150 15×4.5 -0104 6 -0500 6 8 200 19×5.5 -0203 6 -0609 6 10 250 24×7 -0302 6 -0708 6 12 300 28×8.5 -0401 6 -0807 6

Half round file

"Teng Tools" Handled. Medium coarse. Hewing all round. For processing concave and flat surfaces as well as large holes. Art. no. 12852 -0103 Teng Tools No FLHR10 Length inch / mm 10 / 250 Dimensions mm 24.5x8 Pack. qty 10

Round files Round file

"Nicholson" Handled.Double cut. For processing round and concave surfaces. Length Length DimenBast sions Art. no. Pack. inch mm mm 7044 qty 6 150 6.5 -0102 6 8 200 8 -0201 6 10 250 9.5 -0300 6 12 300 12.5 -0409 6

Sec. cut Art. no. Pack. 7044 qty -0508 6 -0607 6 -0706 6 -

Round file

"Teng Tools" Handled. Double cut - medium coarse. For processing round and concave surfaces. Art. no. 12853 -0102 Teng Tools No FLRD10 Length inch / mm 10 / 250 Diameter mm 10.2 Pack. qty 10

Sharpening file Sharpening file

"Nicholson" Handled. One side single cut for sharpening tools - the other side double cut for general filing and quick processing. One uncut edge - the other edge single cut. Art. no. 7047 -0109 Length inch / mm 8 / 200 Dimensions mm 24.5×4.5 Pack. qty 6

Handicraft file Handicraft file

"Nicholson" Handled. Special file for processing wood, leather and other soft materials. One side has a half round rasp cut for coarse processing - the other side has a flat file cut for smooth finishing. Art. no. 7046 -0100 Length inch / mm 8 / 200 Dimensions mm 23×6.5 Pack. qty 6

164

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 165 Friday, March 27, 2009 11:08 AM

Deburring tools - Files

Hand file set

"Teng Tools" Set of 5 handled medium heavy 10" hand files - flat, hand file, half round, round and three square file. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool trolleys. Art. no. 12844 -0104 Teng Tools No TTXF05 No. of files ea. 5 File length mm 250 Case size LxWxH mm 560x110x74 Weight kg 1.0 Pack. set 1

File set on wall rack

"Teng Tools" Rack with 5 handled 10" hand files. Supplied on wall rack. A display is supplied with the order of 5 wall racks containing files. Art. no. 12866 -0107 Teng Tools No WRFL05 Contents:Flat file FLFT10, length mm 250 Flat file FLHF10, length mm 250 Half-round file FLHR10, length mm 250 Round file FLRD10, length mm 250 Three square file FLtr10, length mm 250 Pack. set 5 Loose wall rack 12866 -0206 Teng Tools No WRFL05-R Pack. qty 1

Files - Grinding tools

Hand file set

3

Cabinet rasps Cabinet rasp

"Nicholson" Handled. Half round section. Semi-coarse rasp toothing. For use on wood, plywood, plastic, construction boards and other soft materials. Art. no. 7045 -0101 -0200 -0309 Length inch 8 10 12 Length mm 200 250 300 Dimensions mm 23×6.5 28.5×7 34×8.5 Pack. qty 6 6 6

Round rasps Round rasp

"Nicholson" Handled. Round - tapered towards the tip. Semi-coarse rasp toothing. For use on wood and other soft materials. Art. no. 7048 -0108 Length inch 8 Length mm 200 Dimensions mm 8 Pack. qty 6

Flat saw files Flat saw file

"Nicholson" Handled. Thin. Smooth. Single cut. With one round edge. For sharpening circular saw blades and bandsaw blades. Art. no. 7049 -0107 -0206 -0305 -0404 Length inch 6 8 10 12 Length mm 150 200 250 300 Dimensions mm 15×3 20×3.5 24.5×4.5 29.5×5.5 Pack. qty 6 6 6 6

Flat saw file

"Nicholson" Handled. Thin. Smooth. Single cut. With two round edges. For sharpening circular saw blades and bandsaw blades. Art. no. 7493 -0108 -0207 Length inch 8 10 Length mm 200 250 Dimensions mm 20×3.6 24.5×4.5 Pack. qty 6 6

165

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 166 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Deburring tools - Files Chain saw files Chain saw file

"Nicholson" In a 3-pack. Round. Parallel. Double cut. Smooth. For sharpening chipper tooth saw chains. Art. no. 7032 -0205 -0403 -0502 Nicholson No 620 83 835 Length inch 6 8 8 Length mm 150 200 200 Diameter 5/32=4.0 3/16=4.8 7/32=5.5 For saw chains 3/8 0.325 3/8 No. of 3-packs per pack. 4 4 4

Three square tapered saw files Three square tapered saw file

"Nicholson" Handled."Slim tapers". Single cut. Smooth. Slim. For sharpening saws with fine oblique toothing. Art. no. 7050 -0103 Length inch 6 Length mm 150 Dimensions mm 8.5 Pack. qty 6

Rotary burrs Made of tungsten carbide Rotary burr

"Procut" Shaft diameter 3 mm. Cut 6. Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Cut 2. For hard and tough materials when a high finish is required. Procut Overall Head Head Cut 6 Cut 2 length diam. length Art. no. Pack. Art. no. Pack. No mm mm mm 3126 qty 3126 qty A 30314 38 3.0 14.0 -0029 1 -0102 1 A 30314 50 3.0 14.0 -0045 1 A 30314 75 3.0 14.0 -0060 1 A 30612 51 6.35 12.7 -0136 1 C 30312 38 3.0 14.0 -0144 1 -0219 1 C 30312 50 3.0 14.0 -0169 1 C 30612 51 6.35 12.7 -0243 1 D 30303 38 3.0 2.7 -0250 1 -0300 1 D 30303 50 3.0 2.7 -0268 1 D 30404 38 4.0 4.0 -0284 1 D 30606 45 6.35 5.7 -0342 1 E 30610 49 6.35 9.6 -0375 1 F 30312 38 3.0 14.0 -0383 1 F 30312 50 3.0 14.0 -0417 1 F 30612 51 6.35 12.7 -0433 1 G 30312 38 3.0 14.0 -0482 1 -0508 1 G 30312 50 3.0 14.0 -0524 1 G 30612 51 6.35 12.7 -0623 1 H 30306 38 3.0 6.0 -0656 1 L 30312 38 3.0 14.0 -0805 1 -0904 1 L 30612 51 6.35 15.8 -1126 1 M 30311 38 3.0 11.0 -1183 1 -1209 1 M 30311 50 3.0 11.0 -1225 1 M 30612 51 6.35 15.8 -1324 1 N 30304 38 3.0 4.0 -1365 1 N 30606 45 6.35 6.35 -1456 1 -

Rotary burr

"Procut" Set consists of 20 different rotary burrs for a wide application area. Shank diameter 3 mm. Supplied in plastic case. Art. no. 3126 -4005 Set no 1 No. of files 20 Shaft diameter mm 3 Pack. qty 1

166

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 167 Friday, March 27, 2009 11:08 AM

Deburring tools - Files

Rotary burr

"Procut" Cylinder form. For facing surfaces and deburring edges. Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Cut 2 = Medium coarse. For hard and tough materials. Cut 3 = Extra coarse for aluminium, soft metals, plastic, glass fibre and the like Burrs with extra long shank up to 200 mm and burrs with other cuts available on request. Procut ShankHead Head Cut 6 Cut 2 Cut 3 diam. diam. length Art. no. Pack. Art. no. Pack. Art. no. Pack. Ø d1 Ø d2 l No mm mm mm 3129 qty 3128 qty 3675 qty A 60618 6 6.0 18.0 -0109 1 -0100 1 -0107 1 A 60820 6 8.0 19.2 -0208 1 -0209 1 A 61020 6 9.6 19.2 -0307 1 -0308 1 -0206 1 A 61225 6 12.5 25.4 -0406 1 -0407 1 -0305 1 A 81225 8 12.5 25.4 -0422 1 A 61525 6 15.8 25.4 -0430 1 -0431 1 -0404 1 A 62025 6 19.2 25.4 -0463 1 -0503 1 Art. no. 3129 -0497 -0513 -0521 -0539 -0547 -0554 Procut No A 60618 A 60618 A 61020 A 61020 A 61225 A 61225 Total length mm 100 150 120 170 125 175 Shaft daim. Ø d1 mm 6 6 6 6 6 6 6.0 6.0 9.6 9.6 12.5 12.5 Head diam. Ø d2 mm Head length l mm 18.0 18.0 19.2 19.2 25.4 25.4 Pack. qty 1 1 1 1 1 1

Files - Grinding tools

Made of tungsten carbide

3

Rotary burr

"Procut" Cylinder form with end cut. For facing surfaces and deburring edges. End cut for face removal. Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Cut 2 = Medium coarse. For hard and tough materials. Burrs with extra long shank up to 200 mm and burrs with other cuts available on request. Procut ShankHead Head Cut 6 Cut 2 diam. diam. length Art. no. Pack. Art. no. Pack. Ø d1 Ø d2 l No mm mm mm 3129 qty 3128 qty A 60618 E 6 6.0 18.0 -3509 1 A 60820 E 6 8.0 19.2 -3558 1 -3559 1 A 61020 E 6 9.6 19.2 -3574 1 -3575 1 A 61225 E 6 12.5 25.4 -3806 1 -3807 1 A 61525E 6 15.8 25.4 -3905 1 A 62025 E 6 19.2 25.4 -4002 1 -

Rotary burr

"Procut" Cylinder form with round top. For facing surfaces with contoured faces and making lubrication channels. Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Cut 2 = Medium coarse. For hard and tough materials. Cut 3 = Extra coarse toothing for aluminium, soft metals, glass fibre and the like. Burrs with extra long shank up to 200 mm and burrs with other cuts available on request. Procut ShankHead Head Cut 6 Cut 2 Cut 3 diam. diam. length Art. no. Pack. Art. no. Pack. Art. no. Pack. Ø d1 Ø d2 l No mm mm mm 3129 qty 3128 qty 3675 qty C 60618 6 6.0 18.0 -0505 1 -0506 1 -0602 1 C 60820 6 8.0 19.2 -0604 1 -0605 1 C 61020 6 9.6 19.2 -0703 1 -0704 1 -0701 1 C 61225 6 12.5 25.4 -0802 1 -0803 1 -0800 1 C 81225 8 12.5 25.4 -0828 1 C 61525 6 15.8 25.4 -0836 1 -0909 1 C 62025 6 19.2 25.4 -1006 1 Art. no. 3129 -0562 -0570 -0729 -0745 -0877 -0885 Procut No C 60618 C 60618 C 61020 C 61020 C 61225 C 61225 Total length mm 100 150 120 170 125 175 Shaft daim. Ø d1 mm 6 6 6 6 6 6 6.0 6.0 9.6 9.6 12.5 12.5 Head diam. Ø d2 mm Head length mm 18.0 18.0 19.2 19.2 25.4 25.4 Pack. qty 1 1 1 1 1 1

167

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 168 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Deburring tools - Files Rotary burr

"Procut" Ball shape. For deburring weld joints and hole on e.g. rounded surfaces. Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Cut 2 = Medium coarse. For hard and tough materials. Cut 3 = Extra coarse for aluminium, soft metals, plastic, glass fibre and the like Burrs with extra long shank up to 200 mm and burrs with other cuts available on request. Procut ShankHead Head Cut 6 Cut 2 Cut 3 diam. diam. length Art. no. Pack. Art. no. Pack. Art. no. Pack. Ø d1 Ø d2 l No mm mm mm 3129 qty 3128 qty 3675 qty D 60606 6 6.0 6 -0901 1 -0902 1 D 60808 6 8.0 7.0 -1008 1 -1009 1 D 61010 6 9.6 8.5 -1107 1 -1108 1 -1105 1 D 61212 6 12.5 11.4 -1206 1 -1207 1 -1204 1 D 81212 8 12.5 11.4 -1230 1 D 61515 6 15.8 14.4 -1255 1 -1303 1 D 62020 6 29.2 17.5 -1263 1 -1402 1 D 82020 8 19.2 17.5 -1289 1 Art. no. 3129 -1123 -1149 -1164 -1180 Procut No D 61010 D 61010 D 61212 D 61212 Total length mm 110 160 112 162 Shaft daim. Ø d1 mm 6 6 6 6 Head diam. Ø d2 mm 9.6 9.6 12.5 12.5 Head length mm 8.5 8.5 11.4 11.4 Pack qty 1 1 1 1

Rotary burr

"Procut" Oval shape. For forming and deburring workpieces with complicated rounded shapes, e.g. cylinder blocks and drop forging tools. Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Cut 2 = Medium coarse. For hard and tough materials. Cut 3 = Extra coarse for aluminium, soft metals, plastic, glass fibre and the like Burrs with extra long shank up to 200 mm and burrs with other cuts available on request. Procut ShankHead Head Cut 6 Cut 2 Cut 3 diam. diam. length Art. no. Pack. Art. no. Pack. Art. no. Pack. Ø d1 Ø d2 l No mm mm mm 3129 qty 3128 qty 3675 qty E 60815 6 8.0 15.0 -1305 1 E 61015 6 9.6 15.8 -1404 1 -1405 1 -1501 1 E 61220 6 12.5 22.2 -1503 1 -1504 1 -1600 1 E 81220 8 12.5 22.2 -1552 1 E 61525 6 15.8 25.4 -1578 1 -1709 1 E 62025 6 19.2 25.4 -1808 1

Rotary burr

"Procut" Round tree shape. For deburring and shaping. Gives good access due to its well balanced shape. Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Cut 2 = Medium coarse. For hard and tough materials. Cut 3 = Extra coarse for aluminium, soft metals, plastic, glass fibre and the like Burrs with extra long shank up to 200 mm and burrs with other cuts available on request. Procut ShankHead Head Cut 6 Cut 2 Cut 3 diam. diam. length Art. no. Pack. Art. no. Pack. Art. no. Pack. Ø d1 Ø d2 l No mm mm mm 3129 qty 3128 qty 3675 qty F 60618 6 6.0 18.0 -1602 1 -1603 1 F 60820 6 8.0 20.0 -1701 1 -1702 1 F 61020 6 9.6 19.2 -1800 1 -1801 1 -1907 1 F 61225 6 12.5 25.4 -1909 1 -1900 1 -2004 1 F 81225 8 12.5 25.4 -1925 1 F 61525 6 15.8 25.4 -1933 1 -2103 1 F 62025 6 19.2 25.4 -2202 1 Art. no. 3129 -1610 -1628 -1636 -1651 -1677 -1693 Procut No F 60618 F 60618 F 61020 F 61020 F 61225 F 61225 Total length mm 100 150 120 170 125 175 Shaft daim. Ø d1 mm 6 6 6 6 6 6 6.0 6.0 9.6 9.6 12.5 12.5 Head diam. Ø d2 mm Head length l mm 18.0 18.0 19.2 19.2 25.4 25.4 No. of blades per pack. 1 1 1 1 1 1

168

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 169 Friday, March 27, 2009 11:08 AM

Deburring tools - Files "Procut" Tree shaped. Gives good access in slots and inside corners through its pointed shape. Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Cut 2 = Medium coarse. For hard and tough materials. Burrs with extra long shank up to 200 mm and burrs with other cuts available on request. Procut Shank diam. Head diam. Head length Cut 6 Cut 2 Ø d1 Ø d2 l Art. no. Pack. Art. no. No mm mm mm 3129 qty 3128 G 60618 6 6.0 18.0 -2006 1 -2007 G 60820 6 8.0 19.2 -2105 1 G 61020 6 9.6 19.2 -2204 1 -2205 G 61220 6 12.5 19.2 -2303 1 G 61225 6 12.5 25.4 -2402 1 -2403 G 81225 8 12.5 25.4 -2428 1 G 61525 6 15.8 25.4 -2436 1 Art. no. 3129 -2121 -2147 Procut No G 61020 G 61020 Total length per inch 120 170 Shaft daim. Ø d1 mm 6 6 mm 9.6 9.6 Head diam. Ø d2 Head length l mm 19.2 19.2 Pack. qty 1 1

Pack. qty 1 1 1 -

Files - Grinding tools

Rotary burr

3

Rotary burr

"Procut" Flame shape. For processing large crowned surfaces. Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Burrs with extra long shank up to 200 mm and burrs with other cuts available on request. Procut Shank diam. Head diam. Head length Cut 6 Ø d1 Ø d2 l Art. no. Pack. No mm mm mm 3129 qty H 60820 6 8.0 19.2 -2501 1 H 61232 6 12.5 31.8 -2600 1 H 81232 8 12.5 31.8 -2634 1 H 61535 6 15.8 36.5 -2659 1

Rotary burr

"Procut" Cone shaped 60°. For processing edges in 30° bevels. Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Burrs with extra long shank up to 200 mm and burrs with other cuts available on request. Procut Shank diam. Head diam. Head length Cut 6 Ø d1 Ø d2 l Art. no. Pack. No mm mm mm 3129 qty J 60606 6 6.0 6.0 -3426 1 J 61210 6 12.5 10.8 -3442 1

Rotary burr

"Procut" Cone shaped 90°. For processing edges in 45° bevels. Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Burrs with extra long shank up to 200 mm and burrs with other cuts available on request. Procut Shank diam. Head diam. Head length Cut 6 Ø d1 Ø d2 l Art. no. Pack. No mm mm mm 3129 qty K 61206 6 12.5 6.8 -3707 1 K 62012 6 19.2 12.0 -3756 1

Rotary burr

"Procut" Cone shape with round top. For shaping and deburring with good access due to the long head. Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Cut 2 = Medium coarse. For hard and tough materials. Cut 3 = Extra coarse for aluminium, soft metals, plastic, glass fibre and the like Burrs with extra long shank up to 200 mm and burrs with other cuts available on request. Procut ShankHead Head Cut 6 Cut 2 Cut 3 diam. diam. length Art. no. Pack. Art. no. Pack. Art. no. Pack. Ø d1 Ø d2 l No mm mm mm 3129 qty 3128 qty 3675 qty L 60618 6 6.0 18.0 -2717 1 -2718 1 L 60822 6 8.0 25.4 -2733 1 L 61026 6 9.6 30.2 -2808 1 -2301 1 L 61228 6 12.5 32.0 -2907 1 -2908 1 -2400 1 L 81228 8 12.5 32.0 -2931 1 L 61533 6 15.8 33.3 -2509 1 169

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 170 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Deburring tools - Files Art. no. Procut Total length Shaft daim. Ø d1 Head diam. Ø d2 Head length Pack.

3129 No mm mm mm mm qty

-2758 L 61026 120 6 9.6 30.2 1

-2774 L 61026 170 6 9.6 30.2 1

Rotary burr

"Procut" Cone shaped. For deburring in e.g. narrow slits, gives good access. Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Cut 2 = Medium coarse. For hard and tough materials. Burrs with extra long shank up to 200 mm and burrs with other cuts available on request. Procut Shank diam. Head diam. Head length Cut 6 Cut 2 Ø d1 Ø d2 l Art. no. Pack. Art. no. Pack. No mm mm mm 3129 qty 3128 qty M 60620 6 6.0 20.0 -3004 1 -3005 1 M 61020 6 9.6 19.2 -3053 1 M 61222 6 12.5 25.4 -3111 1 -3112 1 M 61525 6 15.8 26.6 -3202 1 -

Rotary burr

"Procut" Inverted cone shape. For deburring and shaping edges on the back plane. Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Burrs with extra long shank up to 200 mm and burrs with other cuts available on request. Procut Shank diam. Head diam. Head length Cut 6 Ø d1 Ø d2 l Art. no. Pack. No mm mm mm 3129 qty N 60606 6 6.0 8.0 -3251 1 N 61010 6 9.6 9.6 -3301 1 N 61212 6 12 12 -3335 1 N 61520 6 15.8 19.2 -3525 1

Rotary burr

"Procut" Cut 3. Extra coarse for aluminium, soft metals, plastic, glass fibre and the like. Set of 4 rotary burrs with shank diameter 6 mm. Supplied in plastic case. Art. no. 2632 -0036 -0051 Set no 6 7 No. of files 4 4 Contains burrs A 61020-3, C 61020-3, F A 61225-3, C 61225-3, F 61020-3, G 61026-3 61225-3, L 61228-3 Pack. set 1 1

Rotary burr

"Procut" Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Set of 8 rotary burrs with shank diameter 6 mm. Supplied in plastic case. Art. no. 2632 -0101 Set No 2 No. of files 8 Contains burrs No A 61225-6, C 61020-6, C 61225-6, D 61212-6, E 61015-6, F 61020-6, F 61225-6, G 61020-6 Pack. set 1

Rotary burr

"Procut" Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Sets of 4 rotary burrs with shank diameter 6 mm. Supplied in plastic case. Art. no. 2632 -0200 -0242 Set no 3 8 No. of files 4 4 Contains burrs A 61020-6, C 61020-6, F A 61225-6, C 61225-6, F 61020-6, G 61020-6 61225-6, G 61225-6 Pack. set 1 1

170

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 171 Friday, March 27, 2009 11:08 AM

Grinding tools "Procut" Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Sets of 8 rotary burrs with shank diameter 6 mm. Supplied in plastic case. Art. no. 2632 -0291 -0309 Set No 9 4 No. of files 8 8 Contains burrs A 60618-6, A 61020-6, C 60618- A 60618-6, A 61225-6, C 606186, C 61020-6, F 60618-6, F 6, C 61225-6, F 60618-6, F 61020-6, G 60618-6, G 61020-6 61225-6, G 60618-6, G 61225-6 Pack. set 1 1

Rotary burr

"Procut" Cut 6 = Double cut (X-cut). For most materials, hard as well as soft. Effective chip braking gives short chips. Set with 8 rotary burrs. Shank diameter 6 mm. Supplied in plastic case. Art. no. 2632 -0408 Set no 5 No. of files 8 A 60618-6, C 60618-6, D 60606-6, E 60610-6, F 60618-6, G 60618-6, L 60618-6, M 60620-6 Contains burrs Pack. set 1

Files - Grinding tools

Rotary burr

3

Grinding tools Whetstones Knife sharpener Knife sharpener

"Norton" Crystolon.Silicon carbide. Combined coarse-fine. For garden, agricultural and forestry tools. Sharpens quickly and effectively. Art. no. 8287 -0304 Norton No JT 930 Total length mm 375 Pack. qty 5

Workshop whetstone (rectangular) Whetstone

"Norton" Crystolon. Combined - fine/coarse. Silicon carbide. For diverse sharp-edged tools. One side coarse for dull edges the other side for the required fine edge. Art. no. 4490 -0207 Size mm 165×45×20 Pack. qty 6

Whetstone Art. no. Orig. no Size Pack.

3001 mm qty

-0102 35 R 100×25×15 1

Whetstone

"Norton" India. Combined - fine/coarse. Aluminium oxide. For general tool sharpening. Art. no. 3004 -0307 -0406 Norton No IB-45 IB-6 Size mm 125×50×20 150×50×25 Pack. qty 5 5

-0604 IB-8 200×50×25 5

Whetstone

"Norton" Arkansas.Natural stone. Suitable for very fine sharp-edged tools e.g. surgical instruments. Hard. Art. no. 3005 -0207 Norton No HB-14 Size approx. mm 100×25×8 Pack. qty 5

171

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 172 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Diamond whetstones Diamond whetstone

"Norton" With diamond coating. For edge dressing on tungsten carbide tools. Blue is used for sharpening between regrinding. Phenolic resin bound. Red is used for edge dressing. Metal bound. Art. no. 8289 -0104 -0203 Norton P3 Colour Blue Red Grade Mesh 325 Coarse 600 Fine Diamond depth mm 1.2 1.2 Diamond width mm 10 10 Diamond length mm 35 35 Total length mm 150 150 Pack. qty 1 1

Diamond whetstone Art. no. Type Coarseness Size Pack. Art. no. Type Coarseness Size Pack.

4097 Mesh mm qty 4097 Mesh mm qty

-0055 WM-Green 1200 Extra fine 110×22×6 10 -

-0105 WM-Red 600 Fine 110×22×6 10 -0303 W6-Red 600 Fine 152×51×19 10

-0204 WM-Blue 325 Coarse 110×22×6 10 -0402 W6-Blue 325 Coarse 152×51×19 10

Concrete whetstone Concrete whetstone

"Norton" Crystolon. Groove. Silicon carbide. Coarse. With wooden handle. For smoothing concrete, rough grout etc. Art. no. 8287 -0106 -0205 Norton BFH-6 BFH-235 Size mm 150×75×25 200×90×38 Pack. qty 5 5

Grinding wheels Plastic bushings Plastic bushing for grinding wheels

Grinding wheels are supplied as standard with the largest available hole diameter for each size. These plastic bushings are used to reduce the hole diameter. An outer diameter of 32 mm is also available in a single, through design which is especially intended for thick grinding wheels. 20 mm o.d. 32 mm o.d. Size Art. no. Pack. Size Art. no. Pack. mm 8298 qty mm 8298 qty 20×18 -0061 1 32×25 -0509 1 20×17 -0087 1 32×20 -0608 1 20×16 -0103 1 32×19 -0707 1 20×15 -0137 1 20×14 -0152 1 32×25,4 (1") -0806 1 20×13 -0202 1 32×16 -0855 1 20×10 -0301 1 32×13 -0905 1 20×12 -0400 1 20×12,7 (½") -0251 1 25 mm o.d. 32 mm o.d. through 35 mm o.d. Size Art. no. Pack. Size Thickness Art. no. Pack. Size Art. no. Pack. mm 8298 qty mm mm 8298 qty mm 8298 qty 25×20 -1200 1 32×25 40 -1002 1 35×20 -1309 1 32×25 50 -1101 1 -

172

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 173 Friday, March 27, 2009 11:08 AM

Grinding tools

Files - Grinding tools

Straight grinding wheels for tool grinding

3

Grinding wheel for tool grinding

"Norton" SG. Type 1. For high speed steel and alloyed steel, hardened and natural. Ceramic bound. The composition of the SG-abrasive allows for large removal rates and colder grinding. Max. peripheral speed 35 m/s. Diam.× thickness.× hole*) Max. speed Art. no. CompoPack. mm r/min 1775 sition qty 125×13×20 5350 -0100 SGA46-KVX 1 150×13×32 4460 -0209 SGA46-KVX 1 200×25×32 3340 -0308 SGA46-KVX 1 100×6×20 6680 -1009 SGA80-LVX 1 100×10×20 6680 -1108 SGA60-KVX 1 100×13×20 6680 -1207 SGA60-KVX 1 100×20×20 6680 -1306 SGA60-KVX 1 125×6×20 5350 -1405 SGA80-LVX 1 125×10×20 5350 -1504 SGA60-KVX 1 125×13×20 5350 -1603 SGA60-KVX 1 125×20×20 5350 -1702 SGA60-KVX 1 150×6×32 4460 -1801 SGA80-LVX 1 150×10×32 4460 -1900 SGA60-KVX 1 150×13×32 4460 -2007 SGA60-KVX 1 150×20×32 4460 -2106 SGA60-KVX 1 180×13×32 3710 -2205 SGA60-KVX 1 180×20×32 3710 -2304 SGA60-KVX 1 200×6×32 3340 -2403 SGA80-LVX 1 200×10×32 3340 -2502 SGA80-KVX 1 200×13×32 3340 -2601 SGA60-KVX 1 200×20×32 3340 -2700 SGA60-KVX 1 200×25×32 3340 -2809 SGA60-KVX 1 200×32×32 3340 -2908 SGA60-KVX 1 100×13×20 6680 -3005 SGA100-JVX 1 125×13×20 5350 -3104 SGA100-JVX 1 125×20×20 5350 -3203 SGA100-JVX 1 150×10×32 4450 -3302 SGA100-JVX 1 150×13×32 4460 -3401 SGA100-JVX 1 150×20×32 4460 -3500 SGA100-JVX 1 200×25×32 3340 -3609 SGA100-JVX 1

Grinding wheels for tool grinding

"Norton" Ceramic. Max. peripheral speed 45 m/s. 38A. For high speed steel, hardened and unhardened. Very free cutting with small - average removal rates. SGB. All round disc. For high speed steel and alloyed steel, hardened and unhardened. Free cutting at higher removal rates. 3 SG. For hardened materials, high speed steel and alloyed steel. With a very high removal rate. Diam. x thickness x holes mm 100x6x32 100x10x32 100x13x32 100x20x32 125x6x32 125x10x32 125x13x32 125x20x32 150x6x32 150x10x32 150x13x32 150x13x32 150x16x32 150x20x32 150x20x32 150x25x32 180x13x32 180x20x32 180x25x32 200x6x32 200x10x32 200x13x32 200x20x32 200x20x32 200x25x32 200x25x32 200x32x32

Max speed rpm 8590 8590 8590 8590 6880 6880 6880 6880 5730 5730 5730 5730 5730 5730 5730 5730 4780 4780 4780 4300 4300 4300 4300 4300 4300 4300 4300

Art. no. 14505 -0209 -0308 -0407 -0704 -0803 -1306 -1900 -2403 -3203 -3401 -4003 -4508 -4904 -5000 -5505 -5604 -5752 -5901 -6206 -6404 -6651 -6859 -7105

38A Composition 38A60-LVS 38A60-LVS 38A60-LVS 38A60-LVS 38A60-LVS 38A60-LVS 38A60-LVS 38A60-LVS 38A46-LVS 38A60-NVS 38A60-LVS 38A60-LVS 38A100-JVS 38A60-KVS 38A60-MVS 38A60-LVS 38A60-MVS 38A60-LVS 38A60-LVS 38A60-KVS 38A60-LVS 38A100-JVS 38A60-LVS

Pack. qty 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Art. no. 14504 -0200 -0507 -0705 -0903 -1802 -1901 -2008 -2701 -2800 -3501 -3808 -3907 -4301 -4707 (-5001) -5100 -5209 -5308

SGB / SG3 Composition SGB60-KVX 3SG60-JVX SGB60-LVX 3SG60-LVX SGB60-KVX 3SG46-HVX 3SG60-LVX SGB100-JVX SGB60-KVX SGB60-JVX SGB60-KVX 3SG60-LVX SGB60-JVX SGB60-KVX 3SG60-JVX SGB60-KVX SGB60-KVX SGB60-KVX

Pack. qty 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 173

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 174 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Straight grinding wheels for tungsten carbide grinding Grinding wheels for tungsten carbide grinding

"Norton" Ceramic grinding wheels of silicon carbide for grinding tungsten carbide, aluminium, glass, etc. Max. peripheral speed 45 m/s. Diam. x thickness x hole*) Max. speed Art. no. CompoPack. mm rpm 14507 sition qty 100x10x32 8590 -0504 39C80-LVS 2 125x13x32 6880 -0702 39C80-KVS 2 125x20x32 6880 -0900 39C80-LVS 2 150x12x32 5730 -1502 39C80-KVS 2 150x20x32 5730 -2104 39C80-LVS 2 150x25x32 5730 -2500 39C80-KVS 2 180x20x32 4780 -2807 39C80-LVS 2 180x25x32 4780 -3102 39C80-LVS 2 200x20x32 4300 -3706 39C80-KVS 2 200x25x32 4300 -4407 39C80-KVS 2

Straight grinding wheels for bench grinders Grinding wheel for bench grinder

"Norton" Ceramic bound. The standard setup for a bench grinder is one wheel for coarse grinding and one for general grinding. The range also includes wheels for extra fine grinding and grinding tungsten carbide. Max. peripheral speed 45 m/s. Diam. x thickness x holes Max. speed Art. no. CompoPack. mm rpm 14503 sition qty 125x15x20 6880 -0102 A60-NVS 2 125x20x32 6880 -0300 A46-NVS 2 125x20x32 6880 -0409 A60-NVS 2 150x20x32 5730 -1308 A46-NVS 2 150x20x32 5730 -1407 A60-NVS 2 150x25x32 5730 -1704 A46-NVS 2 180x20x32 4780 -1902 A46-NVS 2 180x20x32 4780 -2009 A60-NVS 2 180x25x32 4780 -2405 A46-NVS 2 180x25x32 4780 -2504 A60-NVS 2 200x20x32 4300 -2900 A46-NVS 2 200x20x32 4300 -3007 A60-NVS 2 200x25x32 4300 -3502 A46-NVS 2 200x25x32 4300 -3601 A60-NVS 2 200x32x32 4300 -4203 A46-NVS 2 200x32x32 4300 -4302 A60-NVS 2 250x25x32 3440 -4906 A46-NVS 2 250x32x32 3440 -5408 A60-MVS 2 300x40x32 2870 -6703 A46-NVS 2 300x40x32 2870 -6802 A60-MVS 2 300x50x32 2870 -8006 A46-NVS 2 300x50x32 2870 -8105 A60-NVS 2

Straight grinding wheels for coarse grinding Grinding wheels for coarse grinding

"Norton" Phenolic resin bound. For coarse grinding of iron and steel. Designed for use in portable, bench, column and rough-grinding machines. Can also be used with a grinding spindle in portable machines. Max. peripheral speed 50 m/s. Diam. x Max. Art. no. CompoPack. thickness x spehole*) ed mm rpm 15038 sition qty 50x10x10 19100 -0103 A24TB 20 50x20x10 19100 -0301 A24TB 20 63x13x10 15160 -0608 A24RB 20 63x20x10 15160 -0707 A24TB 20 70x20x10 13650 -0806 A24PB 20 80x20x13 11940 -0905 A24PB 20 100x20x20 9550 -1101 A24PB 20 100x25x20 9550 -1408 A24PB 20 200x25x32 4780 -1705 A24QB 2 300x50x32 3180 -1804 A16NB3 2 300x50x32 3180 -1903 A3606B3 2

174

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 175 Friday, March 27, 2009 11:08 AM

Grinding tools

Flaring cup grinding wheels for heavy duty grinding

"Norton" Phenolic resin bound - with embedded guard. Approved by the National Swedish Board of Occupational Safety and Health for applications without external guards on portable machines. Max. peripheral speed 50 m/s. Steel. For rough grinding steel, cast iron, forging and weld joints. A16 - RB 3 = Hard. A 20 - PB 4 = Medium. A 20 MB 5 = soft. Concrete. For grinding concrete and cast iron. Diam.×thickness× hole (thread)

100×50×W5/8 125×50×M14 125×50×W5/8 125×50×W5/8 125×50×W5/8 No master150×50×W5/8 150×50×W5/8

Max. speed rpm 9550 7640 7640 7640 7640 6370 6370

Art. no

5983-0059 5983-0018 5983-0026 5983-0273 5983-0257 5983-0034 59830-067

Steel Designation A20-MB5 A20-MB5 A20-MB5 A20-PB4 A16-RB3 A20-MB5 A16-PB

Pack

Art. no

qty 18 10 10 10 10 8 -

5983-0083 5983-0109 59830-158 -

Concrete DesignNo master ation C20-PB5 C20-PB5 C16-NB -

Pack qty 10 10 -

Files - Grinding tools

Cup grinding wheels for coarse grinding

3

Tool grinding wheels - grinding cups Grinding wheel - grinding cup

"Norton" Ceramic, SG grinding wheels for grinding tools in hardened and unhardened steel and high speed steel. Max. peripheral speed 45 m/s. Diam. x Max. Art. no. CompoPack. thickness x speholes ¹) ed mm rpm 15035 sition qty 80x40x20 10740 -0205 SGB60-JVX 10 100x50x20 8590 -0403 SGB46-JVX 2 100x50x20 8590 -0502 SGB60-KVX 2 125x63x32 6880 -0700 SGB60-KVX 2 150x63x32 5730 -1104 SGB46-JVX 2

Tool grinding wheel - grinding cup

"Norton" SG. Type 11. Ceramic bound. For grinding tools in hardened/natural steel and high speed steel. The composition of the SG-abrasive allows for high removal rates and colder grinding. SG is the perfect choice where the grinding of materials that are difficult to grind takes place under intense working pressure. (Further information about SG is available in separate information.) Max peripheral speed 30 m/s. Diam.× Max. Art. no. CompoPack. thickness.× speed hole*) mm r/min 15174 sition 80×32×20 7160 -1402 SGB60-LVX 100×40×20 5730 -0305 3SG60-KVX 125×40×32 4580 -1709 SGB60-JVX 150×50×32 3820 -2202 SGB60-KVX -

Tool grinding wheels - grinding dishes Tool grinding wheel - grinding dish

"Norton" SG. Type 12. Ceramic bound. For grinding tools in hardened, natural steel and high speed steel. The composition of the SG-abrasive allows for high removal rates and colder grinding. SG is the perfect choice where the grinding of materials that are difficult to grind takes place under intense working pressure. Max peripheral speed 35 m/s. (Further information about SG is available in separate information.) Diam.× Max. Art. no. CompoPack. Art. no. CompoPack. thickness.× speed holes mm r/min 7179 sition qty 15176 sition 100×13×20 6680 -1107 SGB60-KVX 1 -1301 SGB60-LVX 125×13×20 5350 -0303 3SG60-KVX 150×16×20 4460 -1608 SGB60-KVX 150×20×32 4460 -1707 SGB60-KVX -

175

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 176 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Drill grinding wheels Drill grinding wheel

"Norton" Type 5. Ceramic bound. Max. peripheral speed 5 m/s. 38A. For grinding hardened and natural steel as well as high-speed steel. 39C. For grinding tungsten carbide. Diam.× Slot Max. Art. no. thickness× spehole*) ed mm rpm 150×32×32 80x20 4460 8299-1100 200×40×32 110x25 3340 8299-1506 200×40×32 110x25 3340 8299-1605

Compo-

sition 38A60-LVS 38A46-LVS 38A60-LVS

Pack.

qty 2 2 2

Surface grinding wheels Surface grinding wheel

"Norton" SG. Type 1.Ceramic bound. For unhardened to high-grade steel. The composition of the SG-abrasive allows for high removal rates and colder grinding. SG is the perfect choice where the grinding of materials that are difficult to grind takes place under intense working pressure. (Further information about SG is available in separate information.) Max. peripheral speed 35 m/s. Diam. x - max. Art. no. CompoPack. thickness x speholes ed mm rpm 14923 sition qty 200x20x32 3340 -0708 SGB46-HVX 2 200x20x51 3340 -1201 3SG46-I12VXP 2 200x20x51 3340 -1300 3SG60-H12VXP 2 200x20x76 3340 -1607 3SG46-HVX 2 250x25x76 2670 -3504 SGB46-HVX 1 355x40x127 1910 -5707 3SG46-HVX 1 355x40x127 1910 -5806 SGB46-G12VXP 1 355x50x127 1910 -6507 SGB54-G12VXP 1 406x50x127 1670 -7000 SGB46-G12VXP 1

Centreless grinding wheels Centreless grinding wheel

"Norton" SG. Type 2. Ceramic bound. For natural to high-grade steel. The composition of the SG-abrasive allows for high removal rates and colder grinding. SG is the perfect choice where the grinding of materials that are difficult to grind takes place under intense working pressure. (Further information about SG is available in separate information.) Max. peripheral speed 35 m/s. Diam.×width ThickMax. Art. no. CompoPack. ness speed mm mm r/min 0945 sition qty 175×90 20 3710 -0107 SGB46-HVX 2 200×100 20 3340 -0206 SGB46-HVX 2

Saw sharpening wheels Saw sharpening disc

"Norton" Grinding wheels for sharpening circular saw blades and bandsaw blades. No 6238. Ceramic bound. For max. 35 m/s. Profile A = straight. Diam.× Ceramic bound (profile A) thickness×hole*) Art. no. Max. Compospeed mm 6238 r/min sition 150×6×32 -1009 4460 38A80-NVS 200×6×32 14505-5802 3340 38A80-NVS

Pack. qty 1 1

Grinding wheels for ice skate blades Grinding wheel for ice skate blades

"Norton" SG. Typ 1. Ceramic bound. The composition of the SG-abrasive allows for large removal rates and colder grinding. SG is the perfect choice where the grinding of materials that are difficult to grind takes place under intense working pressure. Max. peripheral speed 35 m/s. (Further information about SG is available in separate information. Diam.× Max. Art. no. CompoPack. thickness×hole speed mm r/min 14504 sition qty 150×6×32 4460 -0903 SGA60-KVX 1 150×6×38 4460 -1208 SGA60-KVX 1 176

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 177 Friday, March 27, 2009 11:08 AM

Grinding tools

Mounted points

"Norton" Type W. Cylindrical, ceramic bonded mounted points of aluminium oxide for normal operations. The max. permitted speeds for mounted points with 13 mm free spindle lengths are stated in the table. Free spindle length means the distance from the abrasive body to the chuck. When fitting the mounted points with shank diameter 3 mm in machines with attachment diameter 6 mm collet 6711 is used. Type Diameter Length Grade Max. speed Industry pack (at 13 mm free spindle.) Art. no. Pack. Art. no. mm mm ness r/min 10792 qty 3149 W 144 3 6 F/K90 105000 -0100 10 W 145 3 10 F/K90 105000 -0308 10 W 162 6 10 M/K60 68400 -0501 W 163 6 13 M/K60 60000 -0704 10 W 169 8 10 F/K90 61650 -0951 25 W 175 10 10 F/K90 54000 -1103 W 185 13 13 F/K90 34500 -1400 Type Diameter Length Coarse Max. speed Industry pack (at 13 mm free spindle.) Art. no. Pack. Art. no. mm mm ness r/min 10792 qty 3149 W 175 10 10 F/K90 96500 -1124 25 -1202 W 177 10 20 M/K60 66000 -1301 W 178 10 25 M/K60 55200 -1165 25 -1657 W 179 10 32 M/K60 45750 -1707 W 187 13 25 M/K60 40500 -1475 W 196 16 25 M/K60 35250 -1905 W 202 20 10 F/K90 50930 -1608 W 204 20 20 M/K60 42750 -2051 W 205 20 25 M/K60 34500 -1504 10 W 207 20 38 M/K60 24000 -2200 W 218 25 13 M/K60 38200 -2408 W 220 25 25 G/K36 25500 -1645 25 W 220 25 25 M/K60 25500 -1660 10 -2507 W 225 32 6 M/K60 30560 -1686 25 W 226 32 10 M/K60 30560 -1694 25 -2705 W 230 30 30 M/K60 24000 -1801 10 W 238 38 38 G/K36 15600 -2903

DIY-pack Quantity per DIY-pack 2 2 2 DIY-pack Quantity per DIY-pack 2 2 2 2 2 2 2 2 2 2 2 2 2

Pack. 1 1 1

Files - Grinding tools

Mounted points

3

Pack. 1 1 1 1 1 1 1 1 1 1 1 1 1

Mounted points

"Norton" Type W. Cylindrical, ceramic bound, aluminium oxide mounted points, with 3 and 6 mm spindles, for normal operations. The max. permitted speeds for mounted points with 13 mm free spindle lengths are stated in the table. Free spindle length is the distance from the abrasive body to the chuck. When fitting the mounted points with shank diameter 3 mm in machines with attachment diameter 6 mm collet 6711 is used. Type Spindle DiaLength CompoMax. speed Art. no. diam. meter (at 13 mm free spindle.) mm mm mm sition rpm 14511 W 144 3 3 6 86A60-PVS 105000 -0102 W 144 3 3 6 86A90-PVS 105000 -0201 W 145 3 3 10 86A90-PVS 105000 -0409 W 149 3 4 6 86A90-PVS 105000 -0607 W 153 3 5 10 86A90-PVS 80850 -0706 W 162 6 6 10 86A60-PVS 68400 -1100 W 163 6 6 13 86A60-PVS 60000 -1308 W 163 3 6 13 86A90-PVS 60000 -1407 W 169 3 8 10 86A90-PVS 61650 -1704 W 170 6 8 13 86A60-PVS 52500 -1803 W 175 3 10 10 86A90-PVS 54000 -2207 W 177 6 10 20 86A60-PVS 66000 -2504 W 188 6 13 40 86A90-PVS 30370 -3403 W 196 6 16 25 86A90-PVS 35250 -3908 W 197 6 16 50 86A90-PVS 21000 -4104 W 204 6 20 20 86A60-PVS 42750 -4302 W 205 6 20 25 86A60-PVS 34500 -4500 W 220 6 25 25 86A36-PVS 25500 -5002 W 220 6 25 25 86A60-PVS 25500 -5200 W 225 6 32 6 86A60-PVS 30560 -5408 W 228 6 32 20 86A60-PVS 27500 -5606 W 230 6 32 32 86A60-PVS 24000 -5903 W 236 6 40 13 86A60-PVS 25470 -6307 W 238 6 40 40 86A60-PVS 15600 -6803

Pack. qty 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 177

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 178 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Mounted points

"Norton" Type A. Fully fashioned, ceramic bound mounted points of aluminium oxide for normal operations. The max. permitted speeds for mounted points with 13 mm free spindle lengths are stated in the table. Free spindle length means the distance from the abrasive body to the chuck. Type Dia- Length Coarse Max. Industry pack DIY-pack meter speed Art. no. Pack. Art. no. Quantity Pack. (at 13 mm per free spindle.) mm mm ness r/min 10790 qty 3147 DIY-pack qty A1 20 65 M/K60 19800 -0102 10 A1 20 65 G/K36 19800 -0201 10 A4 30 30 M/K60 30560 -0404 1 1 A5 20 28 M/K60 45000 -0503 1 1 A5 20 28 G/K36 45000 -0508 10 A8 20 20 G/K36 18750 -0706 10 A 11 22 50 M/K60 19860 -0602 1 1 A 12 20 32 M/K60 48000 -0701 1 1 A 15 6.5 27 FK90 72750 -1209 10 A 20 40 50 G/K36 12750 -1407 10 A 25 25 25 M/K60 35620 -1303 1 1 A 26 16 16 M/K60 59680 -1787 25 -1402 1 1 A 36 40 11 M/K60 23520 -1907 1 1 A 38 25 25 M/K60 34500 -2103 1 1

Mounted points

"Norton" Type A. Large, formed, ceramic bound, aluminium oxide mounted points, with 6 mm spindle, for normal working operations. The max. permitted speeds for mounted points with 13 mm free spindle lengths are stated in the table. Free spindle length is the distance from the abrasive body to the chuck. Type Spindle DiaLength CompoMax. speed Art. no. Pack. diam. meter (at 13 mm free spindle.) mm mm mm sition rpm 14508 qty A1 6 20 65 86A60-PVS 19800 -0206 10 A3 6 22 70 86A60-PVS 16100 -0404 10 A5 6 20 28 86A60-PVS 45000 -0701 10 A8 6 20 50 86A36-PVS 18750 -0909 10 A8 6 20 50 86A60-PVS 18750 -1006 10 A9 6 30 50 86A30-PVS 14250 -1105 10 A 10 6 22 70 86A36-PVS 18000 -1204 10 A 11 6 21 45 86A60-PVS 19860 -1600 10 A 12 6 18 30 86A60-PVS 48000 -1808 10 A 15 6 6 25 86A90-PVS 72750 -2103 10 A 20 6 40 50 86A36-PVS 12750 -2400 10 A 21 6 25 25 86A36-PVS 34500 -2509 10 A 24 6 6 20 86A60-PVS 39370 -2707 10 A 25 6 25 25 86A60-PVS 35620 -2905 10 A 26 6 16 16 86A46-PVS 59680 -3002 10 A 36 6 40 10 86A60-PVS 23520 -3200 10 A 37 6 30 6 86A90-PVS 29840 -3408 10 A 38 6 25 25 86A60-PVS 34500 -3507 10

Mounted point rack

"Norton" Type M65. Wooden rack with 18 types of mounted points - 2 of each type. Art. no. 3150 -0309 Type M65 Included, models A4 A5 A25 A36B44 B73 B122W160 W175 W178 W184W185 W201 W202 W204W215 W226 W236 Pack. qty 1

178

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 179 Friday, March 27, 2009 11:08 AM

Grinding tools "Norton" Type B. Smaller, fully fashioned, ceramic bound mounted points of aluminium oxide for normal grinding operations. The max. permitted speeds for mounted points with 13 mm free spindle lengths are stated in the table. Free spindle length means the distance from the abrasive body to the chuck. When fitting the mounted points with shank diameter 3 mm in machines with attachment diameter 6 mm collet 6711 is used. Type Dia- Length Grade Max. Industry pack DIY-pack meter speed Art. no. Pack. Art. no. Quantity Pack. (at 13 mm per free spindle.) No mm mm ness r/min 10791 qty 3148 DIY-pack B 44 6 10 F/K90 68400 -0304 2 1 B 52 10 20 M/K60 81000 -0403 2 1 B 54 6 13 F/K90 60000 -0903 10 B 64 6 3 F/K90 105000 -1000 10 B 97 4 10 M/K60 105000 -0809 2 1 B 132 10 13 F/K90 45370 -1901 25 -

Files - Grinding tools

Mounted points

3

For stainless steel Mounted points

"Norton" Bakelite bound mounted points for grinding stainless steel. The max. permitted speeds for mounted points with 13 mm free spindle lengths are stated in the table. Free spindle length means the distance from the abrasive body to the chuck. Type DiaLength CompoMax. Industry pack meter speed Art. no. Pack. (at 13 mm free spindle.) mm mm sition rpm 11737 qty W 177 10 20 A46SB 81000 -0353 W 196 16 25 A46SB 15900 -0403 25 W 205 20 25 A46QB 50930 -0452 W 220 25 25 A46QB 23000 -0502 20

Polishing mounted points Polishing mounted points

Flexible. Cotton fibre reinforced. Have abrasive and polishing effect. Suitable peripheral speed 5-10 m/s. Used for tool manufacturing as a supplement to ceramic mounted points. When fitting polishing mounted points with shank diameter 3 mm in machines with attachment diameter 6 mm collet 6711 is used. Art. no. 3152 -0208 -0257 -0307 -0356 Diameter mm 6 8 10 10 Length mm 10 16 10 20 Max. speed for 13 mm free spindle length r/min 90000 80000 65000 65000 Shaft diameter mm 3 6 3 6 Pack. qty 20 10 20 10 Art. no. 3152 -0505 -0554 -0604 -0901 Diameter mm 13 16 20 32 Length mm 20 32 20 32 Max. speed for 13 mm free spindle length r/min 48000 39000 32000 19000 Shaft diameter mm 6 6 6 6 Pack. qty 10 10 10 10

Polishing mounted points

With pointed arch shape respective ball shape. Used together with abrasive, polishing or diamond paste for polishing different metals. Suitable peripheral speed 5-10 m/s. Art. no. 6710 -0107 -0206 Shape Pointed arch shape Ball shaped Size mm 20×32 8 Max. speed r/min 9550 23800 Shaft diameter mm 6 3 Pack. qty 10 20

179

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 180 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Mounted points

"Norton" Type B. Small, formed, ceramic bound, aluminium oxide, mounted points, with 3 mm spindle, for normal grinding operations. The max. permitted speeds for mounted points with 13 mm free spindle lengths are stated in the table. Free spindle length is the distance from the abrasive body to the chuck. When fitting mounted points with a shank diameter in machines with attachment diameter 6 mm, use collet 6711. Type Spindle DiaLength CompoMax. speed Art. no. Pack. diam. meter (at 13 mm free spindle.) mm mm mm sition rpm 14509 qty B 46 3 3 8 86A90-PVS 10500 -0205 10 B 52 3 10 20 86A90-PVS 81000 -0403 10 B 53 3 6 16 86A90-PVS 60000 -0502 10 B 54 3 6 13 86A90-PVS 60000 -0700 10 B 97 3 3 10 86A90-PVS 105000 -1203 10 B 121 3 13 13 86A90-PVS 45370 -1302 10 B 122 3 10 10 86A90-PVS 61650 -1351 B 123 3 5 5 86A90-PVS 104250 -1401 10

Collet for polishing mounted points

Collet, inside diameter 3 mm and external diameter 6 mm. Used to mount polishing mounted points with shank diameter 3 mm in machines with attachment diameter 6 mm. Art. no. 6711 -0106 Int/ext. diameter mm 3/6 Length mm 25 Pack. qty 5

Wheel dresser Wheel dresser

"Primus Sievert" With forced lubrication nipple and hardwood handle. The dressing wheel is composed of specially hardened steel washers with teeth bent into a U-profile, which means the dressing capacity remains the same until the teeth are fully worn down. Provides an open and high capacity abrasive surface through the dull grit being removed and new girt being exposed - at the same time as particles from previous ground material and binding agent are removed. Wheel dresser 3171 -0106 -0205 -0304 Sievert No 361008 361108 361208 Length mm 285 435 435 Wheel dimensions mm 35×12×8 55×24×12 55×50×12 Pack. qty 6 3 2 Loose wheels 3171 -0403 -0502 -0601 Sievert No 700992 701002 701012 Pack. qty 12 12 12 Compl. axle 3171 -0700 -0809 -0908 Sievert No 701522 701532 701542 Pack. qty 5 5 5

Wheel dresser

"Norton" Dressing rods, ceramic, for general sharpening of grinding wheels. Art. no. 7581 -0101 -0200 Dimensions mm 16×16×150 Ø 13×150 Shape square round Pack. qty 1 1

-1000 25x25x150 square 10

-1109 Ø 25,4×203 round 10

Wheel dresser

"Norton" Ceramic dressing rods for sharpening phenoplastic bound diamond wheels and CBN-boron nitride abrasive wheels. Art. no. 7582 -0100 -0209 Dimensions mm 13×13×150 13×25×150 Shape square rectangular Application area For diamond wheels For CBN-wheels Pack. qty 10 10

Wheel dresser

"Norton" Norbide. Dressing rod of boron carbide for sharpening and shaping ceramic tool grinding wheels. Art. no. 7583 -0109 Thickness×width×length mm 5×13×76 Pack. qty 1

180

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 181 Friday, March 27, 2009 11:08 AM

Grinding tools

Grinding wheel dresser - diamond tool

"Norton" With diamond for dressing and aligning straight as well as contoured grinding wheels intended for precision grinding. Norton Carat For max. Straight shank Straight shank Straight shank grinding 8×51 mm 10×51 mm 11×51 mm wheel diam. Art. no. Pack. Art. no. Pack. Art. no. Pack. No approx. mm 5321 qty 5321 qty 5321 qty SP5D 0.50 300 -0043 1 -0068 1 -0100 1 SP7D 0.75 500 -0050 1 -0084 1 -0126 1

Grinding wheel dresser - diamond tool

"Norton" These tools 5 full natural diamonds set in a row with equal spacing along the tools centre line. When the first diamond has been consumed, the mounting metal is machined or ground off so that the next diamond can be used. For dressing and aligning straight as well as contoured grinding wheels. Art. no. 1140 -0108 Norton No MS-05 No. of diamonds 5 Total diamond weight carat 0.5 Tool size mm Ø 11×50 Pack. qty 1

Files - Grinding tools

Diamond tools

3

Grinding wheel dresser - diamond tool Art. no. Carat Total length Diamond attachments length×width No. of diamonds For grinding wheels Pack.

5320 mm mm mm qty

-0101 1.5 190 37×10 30 max. 250 1

-0150 1.75 190 37×10 30 -

-0200 2.0 190 37×10 20 200-400 1

Cut-off wheels For straight machine and tool grinders Cut-off wheels

"Norton" Industrial Line Metal/Inox. For cutting stainless and hardened steel and carbon steel. Gives good comfort and long life in the combination with a high cutting rate. So-called iron free i.e. has a very low iron, chlorine and sulpher content. Working speed max. 80 m/s. Diamonds Max. For stainless steel, hardened steel and carbon steel thickness.x hole speed Art. no. SpecifiPack. mm rpm cation qty 50x0.9x6.35 30560 13171-0055 Metal - Inox Hard 50 50x1.6x6.35 30560 13171-0071 Metal - Inox Medium 25 63x0.9x6.35 24250 13171-0105 Metal - Inox Hard 50 63x1.6x10.0 24250 13171-0204 Metal - Inox Medium 25 76x0.9x6.35 19100 13171-0402 Metal - Inox Medium 50 76x0.9x8.0 19100 13171-0451 Metal - Inox Hard 50 76x0.9x9.5 19100 1591-0201 NZ TAF 50 76x0.9x10.0 19100 13171-0303 Metal - Inox Hard 50 76x1.6x6.35 19100 13171-0709 Metal - Inox Medium 25 76x1.6x8.0 19100 13171-0758 Metal - Inox Medium 25 76x1.6x10.0 19100 13171-0808 Metal - Inox Medium 25

181

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 182 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools For angle grinders Cut-off wheel for angle grinders

"Norton" Norzon Quick Cut. For particularly demanding cutting of iron, steel and stainless steel. Known as iron free, i.e. have very low content of iron, chlorine and sulphur. Reinforced. Max. peripheral speed 80 m/s. Diam.× Max. For steel, stainless steel, iron and castings thickness.×hole speed Art. no Pack mm rpm qty Type 41R 100×1.6×16 15280 3163-0973 25 115×1.0×22 13300 3163-1005 25 115×1.6×22 13300 3163-0759 25 115×2×22 13300 3163-0809 25 125×1.0×22 12300 3163-1104 25 125×1.6×22 12300 3163-0858 25 125×2×22 12300 3163-0601 25 125×2.5×22 12300 3163-0635 25 150×2×22 10200 3163-0668 25 180×1.6×22 8500 3163-1203 25 180×2×22 8500 3163-0684 25 180×2.5×22 8500 3163-0700 25 230×1.9×22 6650 3163-1302 25 230×2×22 6650 3163-0726 25 230×2.5×22 6650 3163-0502 25 Type 42 115×3.2×22 13300 1553-0207 25 125×3.2×22 12300 1553-0306 25 180×3.2×22 8500 1553-0504 25 230×3.2×22 6650 1553-0603 25

Cut-off wheel

"Norton" Vulcan. Reinforced. For cutting iron, steel and stainless steel. So-called iron-free, i.e. has very low content of iron, chlorine and sulphur. Max. peripheral speed 80 m/s. Diam.× Max. For iron, steel and stainless steel thickness.×hole speed Art. no Pack mm rpm 15228 qty 115×1.0×22 13300 -0103 25 115×1.6×22 13300 -0202 25 115×2.0×22 13300 -0236 25 115×2.5×22 13300 -0269 25 125×1.0×22 12300 -0301 25 125×1.6×22 12300 -0400 25 125×2.0×22 12300 -0434 25 125×2.5×22 12300 -0467 25 150×1.6×22 10190 -0509 25 150×2.0×22 10190 -0533 25 150×2.5×22 10190 -0566 25 180×1.6×22 8500 -0608 25 180×2.0×22 8500 -0707 25 180×2.5×22 8500 -0806 25 230×1.9×22 6500 -0905 25 230×2.0×22 6500 -1002 25 230×2.5×22 6500 -1101 25

Cut-off wheel

"Norton" Norton 1-2-3. Permits cutting, grinding and polishing with one and the same disc, which eliminates time losses to change the disc or machine. Norton 1-2-3 cuts, grinds and polishes plates, pipe, etc in steel and stainless steel. When cutting 90° angle, when grinding 30° angle and when polishing 15° angle. Maximal safety on account of three layers of reinforcement netting. Extremely long life compared to conventional cut-off wheels. Low temperature development due to special filler that reduces the risk of burning. The fine grit size gives a very fine cut. Low vibrations. Iron, sulphur and chlorine free. Max. peripheral speed 80 m/s. Diam. x Max. Art. no. Pack. thickness x hole speed mm rpm 13850 qty 115x2.2x22 13200 -0103 25 125x2.2x22 12300 -0202 25

182

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 183 Friday, March 27, 2009 11:08 AM

Grinding tools "Norton" X-Treme Life. Straight. Reinforced. Max. peripheral speed 80 m/s. T-treme Life Inox. Cut-off wheel with extremely long life in combination with high cutting speed. For cutting iron, steel and stainless steel. Known as iron free, i.e. have very low content of iron, chlorine and sulphur. X-treme Life Steel. Cut-off wheel with extremely long life. For cutting iron and steel. Diam.× Max. For iron, steel and stainless steel thickness.×hole speed Art. no Norton Pack mm rpm 10479 type qty Type 41 R 115×0.8×22 13300 See 10479-1801 115×1.0×22 13300 -0100 X-Treme Life Inox 25 115×1.6×22 13300 -0209 X-Treme Life Inox 25 115×2.0×22 13300 -0308 X-Treme Life Inox 25 125×0.8×22 See 10479-1900 125×1.0×22 12300 -0407 X-Treme Life Inox 25 125×1.6×22 12300 -0506 X-Treme Life Inox 25 125×1.6×22 12300 -0555 X-Treme Life Steel 25 125×2.0×22 12300 -0605 X-Treme Life Inox 25 125×2.0×22 12300 -0639 X-Treme Life Steel 25 125×2.5×22 12300 -0654 X-Treme Life Inox 25 150×1.6×22 10190 -0704 X-Treme Life Inox 25 180×1.6×22 8500 -0803 X-Treme Life Inox 25 180×2.0×22 8500 -0902 X-Treme Life Inox 25 180×2.0×22 8500 -0951 X-Treme Life Steel 25 180×2.5×22 8500 -1009 X-Treme Life Inox 25 230×1.9×22 6650 -1108 X-Treme Life Inox 25 230×2.0×22 6650 -1157 X-Treme Life Inox 25 230×2.0×22 6650 -1181 X-Treme Life Steel 25 230×2.5×22 6650 -1207 X-Treme Life Inox 25 Type 42 115×0.8×22 13300 -1801 X-Treme Life Inox 25 125×0.8×22 12300 -1900 X-Treme Life Inox 25 125×3.2×22 12300 -2106 X-Treme Life Inox 25 180×3.2×22 8500 -2304 X-Treme Life Inox 25 230×3.2×22 6650 -2502 X-Treme Life Inox 25

Files - Grinding tools

Cut-off wheel, X-Treme Inox/Steel

3

Cut-off wheel

"Norton" Industrial Line Metal/Inox. For cutting stainless and hardened steel and carbon steel. Gives good comfort and long life in the combination with a high cutting rate. Specially developed medium strength machines. Cut-off wheels with 1.0 mm, 1.6 mm and 1.9 mm thicknesses provide extremely reduced cut times and very fine cuts. Known as iron free, i.e. have very low content of iron, chlorine and sulphur. Reinforced. Max. peripheral speed 80 m/s. Diam. x Max. For stainless steel, hardened steel and carbon steel thickness x hole speedArt. no. Norton Pack mm mm 13171 qty Type 41 115x1.0x22 13300 (-1608) Metal - Inox Medium 25 115x1.6x22 13300 (-1707) Metal - Inox Medium 25 115x2.0x22 13300 (-1806) Metal - Inox Medium 25 125x1.0x22 12300 -2101 Metal - Inox Medium 25 125x1.6x22 12300 -2200 Metal - Inox Medium 25 125x2.0x22 12300 -2309 Metal - Inox Medium 25 150x2.5x22 10190 -2606 Metal - Inox Medium 25 180x1.6x22 8500 -2804 Metal - Inox Medium 25 180x2.0x22 8500 -2903 Metal - Inox Medium 25 180x2.5x22 8500 -3000 Metal - Inox Medium 25 230x1.9x22 6650 -3307 Metal - Inox Medium 25 230x2.0x22 6650 -3406 Metal - Inox Medium 25 230x2.5x22 6650 -3505 Metal - Inox Medium 25 Type 42 100x2.5x16 15280 (-1400) Metal - Inox Medium 25 115x2.5x22 13300 (-1905) Metal - Inox Medium 25 115x3.2x22 13300 (-2002) Metal - Inox Medium 25 125x2.5x22 12300 -2408 Metal - Inox Medium 25 125x3.2x22 12300 -2507 Metal - Inox Medium 25 180x2.5x22 8500 (-3109) Metal - Inox Medium 25 180x3.2x22 8500 -3208 Metal - Inox Medium 25 230x3.2x22 6650 -3703 Metal - Inox Medium 25

183

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 184 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Cut-off wheel for aluminium

"Norton" Industrial Line Alu. For cutting aluminium. Developed to give the highest possible life in combination with high removal rate. Diamonds Max. For aluminium thickness.x hole speed Art. no. Pack. mm rpm 13860 qty 115x1.6x22 13300 -0101 25 125x1.6x22 12300 -0200 25 180x2.5x22 8500 -0309 25 230x1.9x22 6650 -0408 25 230x2.5x22 6650 -0507 25

For cutting machines Cut-off wheel for stationary cutting machines

"Norton" Plain. Flat. For stationary machines. Applications include tool cutting of heat sensitive steel. For iron and steel. Max. peripheral speed 60 m/s. Diam.× Note Max. Art. no. CompoPack Art. no. CompoPack thickness.×hole ation speed mm rpm 8314 sition qty 15138 sition qty 125×1.0×20 Tool cutting. 9170 -0038 57A60-PB25 25 -0508 57A60 150×1.6×20 Tool cutting. 7640 -0103 57A60-PB25 25 -0904 57A60 200×1.6×20 Tool cutting. 5730 -0202 57A60-PB25 25 -2306 57A60 -

Cut-off wheel for stationary cutting machines

"Norton" Reinforced. Flat. Max. peripheral speed 80 m/s (sizes. 400×4×51 mm max. 100 m/s). For large lateral forces. For iron and steel. Diam.× Max. Art. no. CompoPack. thickness×hole speed mm r/min 2180 sition qty 300×2.8×25.4 5075 -0040 Metal-Medium 10 300×2.8×25.4 5075 -0073 BDX-Metal 10 300×3.5×22 5075 -0206 4NZ30-TB25NA 25 300×3.5×22 5075 -0230 Metal-Medium 10 300×3.5×25.4 5075 -0263 Metal-Medium 10 300×3.5×25.4 5075 -0289 BDX-Medium 10 300×3.5×25.4 5075 -0305 4NZ30-TB25NA 25 300×3.5×32 5075 (-0339) Metal-Medium 10 350×3.0×25.4 4300 -0115 BDX-Metal 10 350×3.5×25.4 5075 -0362 Stone-Medium 10 350×4.0×25.4 4300 -0503 4NZ30-TB25NA 25 350×4.5×25.4 4300 -0529 Metal-Medium 10 350×4.5×25.4 4300 -0537 BDX-Metal 10 400×3.0×25.4 3820 -0164 BDX-Metal 10 400×4.5×25.4 3820 -0545 Metal-Medium 10 400×4.5×25.4 3820 -0578 BDX-Metal 10 400×4.5×40 3820 (-0586) 57A30-PB25NA4 25 400×4.0×51 4800 -0602 57A30-TB25NA 25 450×5.0×51 4250 (-0750) 4NZ30-XB25NA 10

For petrol-powered cutting machines Cut-off wheel for cutting machines

"Norton" Reinforced. For iron and steel. Max. peripheral speed 100 m/s. Diam.× Max. For iron and steel For brick and concrete thickness×hole speed Art. no. SpecifiPack. Art. no. SpecifiPack. mm rpm 2180 cation qty 2180 cation qty 300×3.8×22.2 6400 -0800 Metal - Medium 10 -1303 Stone - Medium 10 350×3.8×22.2 5500 -0909 Metal - Medium 10 -1402 Stone - Medium 10 350×4.0×22.3 5500 (-1006) Rail Metal - Medium 10 350×4.0×25.4 5500 (-1105) Rail Metal - Soft 10 350×4.0×25.4 5500 (-1204) Rail Metal - Medium 10 -

184

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 185 Friday, March 27, 2009 11:08 AM

Grinding tools

For straight machine and tool grinders Depressed centre wheel

"Norton" Industrial Line Metal/Inox. For grinding stainless and hardened steel and carbon steel. Gives good comfort and long life in the combination with a high removal rate. So-called iron free i.e. has a very low iron, chlorine and sulpher content. Working speed max. 80 m/s. Diamonds Max. For stainless steel, hardened steel and carbon steel thickness.xhole speed Art. no. SpecifiPack. mm rpm 13172 cation qty 50x6.0x6.35 30560 -0021 Metal - Inox Medium 10 63x6.0x6.35 24250 -0047 Metal - Inox Medium 10 76x6.0x6.35 19100 -0062 Metal - Inox Medium 10 76x6.0x8.0 19100 -0088 Metal - Inox Medium 10 76x7.0x10.0 19100 -0104 Metal - Inox Medium 10

Files - Grinding tools

Depressed centre wheels

3

For angle grinders Depressed centre wheel for angle grinders

"Norton" Norzon Quick Cut. Depressed centre wheel for best possible sanding in combination with long service life. For grinding iron, steel and stainless steel. Known as iron free, i.e. have very low content of iron, chlorine and sulphur. Reinforced. Max. peripheral speed 80 m/s. Diam.×thickMax. For steel, stainless steel, ness×bore speed iron and castings Norton Art. no. Pack mm rpm 1553 qty 100×4.6×16 15300 Hard (-0678) 25 100×7×16 15300 Medium -0702 25 115×7×22 13300 Medium -0801 25 125×4.0×22 12300 Hard -5008 25 125×4.6×22 12300 Hard -3003 25 125×7×22 12300 Medium -0900 25 125×7×22 12300 Soft -3907 25 125×7×22 12300 Hard -0959 25 150×7×22 10200 Medium -1007 25 180×4.0×22 8500 Hard (-5107) 25 180×4.6×22 8500 Hard (-3102) 25 180×7×22 8500 Soft -4001 25 180×7×22 8500 Medium -1106 25 180×7×22 8500 Hard -1155 25 230×4×22 6650 Hard (-5206) 25 230×7×22 6650 Soft (-4100) 25 230×7×22 6650 Medium -1205 25 230×7×22 6650 Hard -1254 25

Depressed centre wheel for angle grinders

"Norton" X-treme. Iron free. For grinding iron, steel and stainless steel. Reinforced. For working speed max. 80 m/s. X-treme life: Depressed centre wheel with extremely long life. X-treme comfort: Depressed centre wheel that gives very comfortable and gentle grinding. Diam.×thickMax. For steel and stainless steel ness×bore Norton Art. no. Pack. mm r/min type 10739 qty 76×6×10 19100 Norspeed -0056 10 115×7×22 13300 X-Treme life -0106 10 125×4×22 12300 X-Treme life -0205 10 125×7×22 12300 X-Treme Life -0304 10 125×7×22 12300 X-Treme Comfort -0403 10 180×4×22 8500 X-Treme Life -0502 10 180×7×22 8500 X-Treme Life -0601 10 180×7×22 8500 X-Treme Comfort -0700 10 230×4×22 6650 X-Treme lLfe -0809 10 230×7×22 6650 X-Treme Life -0908 10 230×7×22 6650 X-Treme Comfort -1005 10

185

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 186 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Depressed centre wheel

"Norton" Industrial Line Metal/Inox. For grinding stainless and hardened steel and carbon steel. Gives good comfort and long life in the combination with a high removal rate. Specially developed medium strength machines. Available in softer design Soft, which gives softer grinding and a high removal rate, but a shorter life. Medium is harder and gives a longer service life. Known as iron free, i.e. have very low content of iron, chlorine and sulphur. Reinforced. Max. peripheral speed 80 m/s. Diam. x thick Max. For stainless steel, hardened steel and carbon steel ness x hole speed Norton Art. no. Pack mm r/min 13172 qty 115x7x22 13300 Metal - Inox Medium (-0500) 25 115x7x22 13300 Metal - Inox Soft (-0609) 25 125x4.6x22 12300 Metal - Inox Medium -0708 25 125x7x22 12300 Metal - Inox Medium -0807 25 125x7x22 12300 Metal - Inox Soft -0906 25 150x7x22 10200 Metal - Inox Medium -1003 25 180x4.6x22 8500 Metal - Inox Medium (-1102) 25 180x7x22 8500 Metal - Inox Medium -1201 25 180x7x22 8500 Metal - Inox Soft -1300 25 230x7x22 6650 Metal - Inox Medium -1607 25 230x7x22 6650 Metal - Inox Soft (-1706) 25

Depressed centre wheel for aluminium

"Norton" Industrial Line Alu. For grinding aluminium. Developed to give the highest possible life in combination with high removal rate. Diamonds Max. For aluminium thickness.x hole speed Art. no. Pack. mm rpm 13861 qty 125x7x22 13300 -0100 25 180x7x22 12300 -0209 25 230x7x22 8500 -0308 25

Depressed centre wheel

"Norton" Vulcan. Reinforced. For grinding iron, steel and stainless steel, So-called iron-free, i.e. has a very low content of iron, chlorine and sulphur. Max. peripheral speed 80 m/s. Diam.×thickMax. For iron, steel and stainless steel ness×hole speed Art. no. Pack mm rpm 15229 qty 100×4.0×16 15200 -0102 10 115×4.0×22 13300 -0201 10 115×6.4×22 13300 -0300 10 125×4.0×22 12300 -0409 25 125×6.4×22 12300 -0508 10 150×6.4×22 10200 -0607 10 180×4.0×22 8500 -0706 10 180×6.4×22 8500 -0805 10 230×4.0×22 6500 -0904 10 230×6.4×22 6500 -1001 10

Depressed centre wheel for angle grinders

"Norton" Type Octopus. Semi-flexible depressed centre wheel for rough and fine cutting of iron, steel and stainless steel. Gives finer surfaces than those from conventional depressed centre wheels with less burning, a higher cut rate and lower noise levels. Grinds more gently than depressed centre wheels but more aggressively than flap discs. Thanks to the three cut-outs in the periphery of the disc, you can see the work surface when grinding. Working angle 15 degrees. Max. peripheral speed 80 m/s. Diam.×thickGrit Max. Art. no. Pack ness×bore speed mm mm rpm 11727 qty 115×4×22 36 13300 -0108 20 115×4×22 60 13300 -0207 20 125×4×22 36 12300 -0306 20 125×4×22 60 12300 -0405 20

Depressed centre wheel

"Norton" Norton 1-2-3. Permits grinding, polishing and cutting with one and the same disc, which eliminates time losses to change the disc or machine. Norton 1-2-3 grinds, polishes and cuts plates, pipe, etc in steel and stainless steel. When grinding 30 angle, when polishing 15 angle and when cutting 90 angle. Maximal safety on account of three layers of reinforcement netting. Low temperature development due to special filler that reduces the risk of burning. The fine grit size gives a very fine, smooth and clean surface finish. Low vibrations. Iron, sulphur and chlorine free. Diam. x thickness x hole Max. speed Art. no. Pack. mm rpm 13850 qty 115x2.2x22 13200 -0103 25 125x2.2x22 12300 -0202 25 186

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 187 Friday, March 27, 2009 11:08 AM

Grinding tools

For angle grinders Flaring cup grinding wheels for heavy duty grinding

"Norton" Phenolic resin bound - with embedded guard. Approved by the National Swedish Board of Occupational Safety and Health for applications without external guards on portable machines. Max. peripheral speed 50 m/s. Steel. For rough grinding steel, cast iron, forging and weld joints. A16 - RB 3 = Hard. A 20 - PB 4 = Medium. A 20 MB 5 = soft. Concrete. For grinding concrete and cast iron. Diam.×thickness× hole (thread)

100×50×W5/8 125×50×M14 125×50×W5/8 125×50×W5/8 125×50×W5/8 No master150×50×W5/8 150×50×W5/8

Max. speed rpm 9550 7640 7640 7640 7640 6370 6370

Art. no.

5983-0059 5983-0018 5983-0026 5983-0273 5983-0257 5983-0034 59830-067

Steel Designation A20-MB5 A20-MB5 A20-MB5 A20-PB4 A16-RB3 A20-MB5 A16-PB

Pack

Art. no.

qty 18 10 10 10 10 8 -

5983-0083 5983-0109 59830-158 -

Concrete DesignNo master ation C20-PB5 C20-PB5 C16-NB -

Pack qty 10 10 -

Files - Grinding tools

Cup grinding wheels

3

Grinding points Grinding top

"Norton" Phenolic resin bound grinding points for use in straight machines. Used for cleaning of malleable and steel castings, steel and forgings. When mounting, you must check that the spindle is not too long so there is a risk of the bushings being pulled out. Neither should it be too short that the grind point becomes loose. Max. peripheral speed 50 m/s. Art. no 9321 (-1001) (-1100) -1209 -1308 (-1407) Norton No 18 R 18 R 18 18 18 R For spindle thread 3/8 UNF 5/8 UNC 3/8 UNF 5/8 UNC 3/8 UNF Composition A24-QB4 A24-QB4 A24-QB4 Diameter mm 63 38 25 Length mm 76 63 51 Max. speed rpm 15160 23870 38200 Pack qty 6 6 6 6 6

Diamond cut-off wheels For angle grinders Diamond cut-off blade

"Norton Durator" Professional Duo. Extremely wide range of applications for diverse construction material such as concrete, concrete pipes, kerbstones, limestone, roof-tiles, cover stones, brick, paving stone, clinkers and granite. Gives equally fine sectional areas as those from a blade with continuous rim. The high trapeziformed segments provide effective disposal of cuttings. This allows for a long working life and quicker cutting. Cooling pauses are not necessary. Extremely long working life, high cutting capacity in very hard material. Laser welded, tight segmentation. For dry and wet cutting. Max. peripheral speed 80 m/sec. Diam.xthickSegment Art. no. Pack nessxhole height x width mm mm 12064 qty 115x2.2x22.2 10.0x2.2 -0107 1 125x2.2x22.2 10.0x2.2 -0206 1 125x2.5x22.2 10.0x2.2 -0255 1 180x2.5x22.2 10.0x2.5 -0305 1 230x2.8x22.2 12.0x2.8 -0404 1

Diamond cut-off blade

"Norton Durator" Professional Laser. Vast application area for diverse building materials such as concrete, concrete pipe, curb stone, limestone, roof-tiles, cover stone, brick, paving stone and clinker. High cutting capacity and long life. Laser welded, segmented. 230 mm med perforated main blade. For dry and wet cutting. Max. peripheral speed 80 m/sec. Diam.xthickSegment Art. no. Pack. nessxhole heightxwidth mm mm 14931 qty 115x2.2x22.2 10.0x2.2 (-0104) 1 125x2.2x22.2 10.0x2.2 -0203 1 230x2.5x22.2 10.0x2.5 -0302 1

187

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 188 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Diamond cut-off blade

"Norton Durator" Professional Laser. Extremely wide range of applications for diverse construction material such as concrete, concrete pipes, kerbstones, limestone, roof-tiles, cover stones, brick, paving stone and clinkers. High cutting capacity and long service life. Laser welded, segmented. For dry and wet cutting. Max. peripheral speed 80 m/sec. Diam.xthickSegment Art. no. Pack nessxhole height x width mm mm 12065 qty 115x2.2x22.2 7.0x2.2 -0106 1 125x2.2x22.2 7.0x2.5 -0205 1 140x2.2x22.2 7.0x2.2 (-0304) 1 150x2.5x22.2 7.0x2.5 -0403 1 150x2.5x30 7.0x2.5 (-0502) 1 180x2.5x22.2 7.0x2.5 -0601 1 230x2.5x22.2 10.0x2.5 -0700 1

Diamond cut-off blade

"Norton Durator" Classic Laser. Wide range of applications for diverse construction material. Quick cutting with long service life. Laser welded, segmented. For dry and wet cutting. Max. peripheral speed 80 m/sec. Diam.xthickSegment Art. no Pack nessxhole height x width mm mm 12066 qty 115x2.2x22.2 7.0x2.2 -0105 1 125x2.2x22.2 7.0x2.2 -0204 1 140x2.2x22.2 7.0x2.2 (-0303) 1 150x2.2x22.2 7.0x2.5 -0402 1 180x2.2x22.2 7.0x2.5 -0501 1 230x2.2x22.2 7.0x2.5 -0600 1

Diamond cut-off blade

"Norton Durator" Classic Uni. Wide range of applications for diverse construction material. For soft - medium hard material. Should not to be used on hard material. Sintered segments, segmented. For dry and wet cutting. Max. peripheral speed 80 m/sec. Diam.xthickSegment Art. no Pack nessxhole height x width mm mm 12067 qty 115x1.8x22.2 7.0x1.8 -0104 1 125x1.8x22.2 7.0x1.8 -0203 1 150x2.2x22.2 7.0x2.2 (-0252) 1 180x2.0x22.2 7.0x2.2 -0302 1 230x2.2x22.2 10.0x2.2 -0401 1

Diamond cut-off blade

"Norton Picto" UNI. For dry and wet cutting of concrete, brick and stone. Gives coarse cut. Sintered segments, segmented. Max. peripheral speed 80 m/s. Diam.xthickSpeed Art. no. Pack nessxhole mm rpm 13226 qty 115x2.0x22 13300 -0100 1 125x2.0x22 12200 -0209 1 180x2.0x22 8500 -0308 1 230x2.4x22 6640 -0407 1

Diamond cut-off blade

"Norton Durator" Professional Abrasive. For abrasive material such as cast floors, asphalt, soft clinkers, cement, soft limestone. Extremely long segments provide longer service life and more efficient removal of chippings. For taxing cutting. For brittle, abrasive and very abrasive material. Laser welded, sparse segmentation. For dry and wet cutting. Max. peripheral speed 80 m/sec. Diam.xthickSegment Art. no Pack nessxhole height x width mm mm 12068 qty 115x2.2x22.2 7.0x2.2 -0103 1 125x2.2x22.2 7.0x2.2 -0202 1 150x2.2x22.2 7.0x2.2 (-0301) 1 180x2.5x22.2 7.0x2.5 -0400 1 230x2.5x22.2 8.0x2.5 -0509 1

188

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 189 Friday, March 27, 2009 11:08 AM

Grinding tools "Norton" Explorer 4x4. For cutting of a wide range of material such as reinforced concrete, granite, asphalt, and steel up to 5 mm thick using the same wheel, which means no loss of time for changing wheel or machine to suit different materials. Explorer 4x4 also has a patent pending system that shows the cutting depth. Laser welded segments. For dry and wet cutting. Max. peripheral speed 80 m/s. Diam. x thickSegment Art. no. Pack ness x hole height x width mm mm 13872 qty 115x2.5x22.2 10.0x2.2 (-0032) 1 125x2.5x22.2 10.0x2.2 -0057 1 230x2.5x22.2 10.0x2.5 (-0107) 1

Diamond cut-off blade

"Norton Durator" Professional Aero-Jet. For heavy-duty ceramics, roof-tiles, natural and artificial stone, exposed aggregate, hard clinker, and glazed pipe. With clearing segment that goes deep into the main blade resulting in the removal of cuttings. High stability and precision and quick and effective cutting. Highly effective blade with very long life and very high cutting speed. Sintered. Full tuck pointed rim. Fluted main blade. For dry cutting. Diam.xthickSegment Art. no. Pack. nessxhole heightxwidth mm mm 13864 qty 115x1.8x22.2 12.0x1.8 -0107 1 125x2.0x22.2 12.0x2.0 -0206 1 230x2.8x22.2 12.0x2.8 -0305 1 230x2.8x22.2 withraised alu centre 12.2x2x8 (-0404) 1

Files - Grinding tools

Diamond cut-off blade

3

Diamond cut-off blade

"Norton Durator" Professional Jet. For ceramic, roof-tiles, natural and artificial stone, hard clinkers and glazed pipes, cast pipes. High cutting capacity and long service life. Sintered, full tuck pointed rim, smooth main blade. For dry and wet cutting. Max. peripheral speed 80 m/sec. Diam.xthickSegment Art. no Pack nessxhole height x width mm mm 12070 qty 115x2.2x22.2 10.0x2.2 -0109 1 125x2.2x22.2 10.0x2.2 -0208 1 140x2.2x22.2 7.0x2.2 (-0307) 1 150x2.2x22.2 7.0x2.2 -0406 1 150x2.2x30 7.0x2.2 (-0505) 1 180x2.2x22.2 7.0x2.2 -0604 1 230x2.2x22.2 10.0x2.2 -0703 1

Diamond cut-off blade

"Norton Durator" Classic Jet. For coarse ceramics, roof-tiles, natural and artificial stone, exposed concrete, hard clinkers and glazed pipes. For medium-sized cutting operations. Quick cutting with long service life. Sintered, full tuck pointed rim, smooth main blade. For dry and wet cutting. Max. peripheral speed 80 m/sec. Diam.xthickSegment Art. no. Pack nessxhole height x width mm mm 12071 qty 115x2.0x22.2 8.0x2.0 -0108 1 125x2.0x22.2 8.0x2.0 -0207 1 180x2.0x22.2 8.0x2.0 -0306 1 230x2.2x22.2 8.0x2.2 -0405 1

Diamond cut-off blade

"Norton Durator" Professional T. For ceramics and very compact material, thin marble and granite slabs, glazed stone slabs etc. High cutting capacity and long service life. Very fine cut, ideal for glazed material. Sintered, completely flat rim. For dry and wet cutting. Max. peripheral speed 80 m/sec. Diam.xthickSegment Art. no. Pack nessxhole height x width mm mm 12072 qty 115x1.6x22.2 5.0x1.6 -0107 1 125x1.6x22.2 5.0x1.6 -0206 1 150x1.6x22.2 5.0x1.6 -0305 1 180x1.6x22.2 5.0x1.6 -0404 1 205x1.6x22.2 5.0x1.6 (-0503) 1 230x1.6x22.2 5.0x1.6 -0602 1

189

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 190 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Diamond cut-off blade

"Norton Durator" Professional XT. For ceramic and glazed products and granite and other hard materials. Very fast cutting on account of the high diamond content in combination with the thin segments (1.2-1.4 mm) Reinforced centre for maximum stability. Diam.xthickSegment Art. no. Pack. nessxhole heightxwidth mm mm 13865 qty 115x1.2x22.2 10.5x1.2 (-0106) 1 125x1.2x22.2 10.5x1.2 (-0205) 1 180x1.4x22.2 10.5x1.4 (-0304) 1 230x1.4x22.2 10.5x1.4 (-0403) 1

Diamond cut-off blade

"Norton Durator" Professional T. For ceramic and very compact materials, thin marble and granite boards, glazed stone slabs, etc. High cutting capacity and long life. Very fine cut, ideal for glazed materials. Sintered, completely flat rim. For dry and wet cutting. Max. peripheral speed 80 m/sec. Diam.xthickSegment Art. no. Pack. nessxhole heightxwidth mm mm 14932 qty 115x1.6x22.2 9.0x1.6 (-0103) 1 125x1.6x22.2 9.0x1.6 -0202 1 180x1.6x22.2 9.0x1.6 (-0301) 1

Diamond cut-off blade

"Norton Durator" Classic T. For ceramic products, glazed products etc. Quick cutting with long service life. Sintered, completely flat rim. For dry and wet cutting. Max. peripheral speed 80 m/sec. Diam.xthickSegment Art. no. Pack nessxhole height x width mm mm 12073 qty 115x1.5x22.2 7.0x1.5 -0106 1 125x1.5x22.2 7.0x1.5 -0205 1 180x2.0x22.2 7.0x2.0 -0304 1 230x1.8x22.2 7.0x1.8 -0403 1

Diamond cut-off blade

"Norton Durator" Professional TP. For seam and slot cutting. Equipped with extra wide segments and long clearing segment, which gives optimal life. Brazed segments. For dry cutting. Diam.xthickSegment Art. no. Pack. nessxhole height x width mm mm 13867 qty 115x4.5x22.2 6.5x4.5 (-0104) 1 125x4.5x22.2 6.5x4.5 (-0203) 1 115x6.5x22.2 6.5x6.5 (-0302) 1 125x6.5x22.2 6.6x6.5 (-0401) 1 115x8.0x22.2 6.5x8.0 (-0500) 1 125x8.0x22.2 6.5x8.0 (-0609) 1

Diamond cut-off blade

"Norton Durator" Professional TP-V. For seam and slot cutting. Equipped with extra wide and wedge shaped segment, that is extra long, giving maximum precision and speed in combination with maximum life. Diam.xthickSegment Art. no. Pack. nessxhole heightxwidth mm mm 13868 qty 115x6.5x22.2 13.0x6.5 (-0103) 1 125x6.5x22.2 13.0x6.5 (-0202) 1

For petrol driven machines and floor and wall routers Diamond cut-off blade

"Norton Durator" Professional Asphalt. For asphalt, asphalt on concrete and other abrasive material. For extra demanding cutting of brittle, abrasive or very abrasive material. With recessed cleaning segment. Contains the patented abrasive SG in the segments. Laser welded, segmented. For dry and wet cutting. Max peripheral speed 80 m/s (diameter 450 and 500 mm 63 m/s). Quick Fix. Metal bushing for hole reduction from 25.4 or 22.23 mm to 20 mm (reversible) and from 25.4 mm to 22.23 mm. Bushing Quick Fix 13872 (-0602) (-0701) For hole reduction mm 25.4 or 22.23 to 20 25.4 to 22.23 Pack qty 1 1

190

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 191 Friday, March 27, 2009 11:08 AM

Grinding tools Segment height x width mm 7.0x2.8 7.0x2.8 7.0x2.8 7.0x3.2 7.0x3.2 7.0x3.2 7.0x3.2 7.0x3.2 6.5x3.2 7.0x3.2 6.5x3.2 7.0 6.5x3.8 7.0x3.8

Art. no.

Pack

12082 -0105 -0204 -0303 -0402 (-0501) (-0600) (-0659) (-0709) (-0758) (-0808) (-0857) (-0907) (-0956) (-1004)

qty 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Files - Grinding tools

Diam.xthicknessxhole mm 300x2.8x20 300x2.8x22.2 300x2.8x25.4 350x3.2x20 350x3.2x25.4 400x3.2x20 400x3.2x20 400x3.2x25.4 4003.2x25.4 450x3.2x25.4 450x3.2x25.4 500x3.8x25.4 500x3.8x25.4 600x3.8x25.4

3

Diamond cut-off blade

"Norton Durator" Professional Beton. For concrete, reinforced concrete, concrete pipes, paving stone, limestone, cover stone, brick. For extra demanding cutting of medium hard - hard material. Laser welded, segmented. For dry and wet cutting. Max. peripheral speed 80 m/s (diameter 450 and 500 mm 63 m/s). Quick Fix. Metal bushing for hole reduction from 25.4 or 22.23 mm to 20 mm (reversible) and from 25.4 mm to 22.23 mm. Bushing Quick Fix 13872 (-0602) (-0701) For hole reduction mm 25.4 or 22.23 to 20 25.4 to 22.23 Pack qty 1 1 Diam.xthickSegment Art. no Pack nessxhole height x width mm mm 12083 qty 300x2.8x20 9.0x2.8 -0104 1 300x2.8x22.2 9.0x2.8 (-0203) 1 300x2.8x25.4 9.0x2.8 -0302 1 350x3.2x20 9.0x3.2 -0401 1 350x3.2x25.4 9.0x3.2 -0609 1 400x3.2x20 9.0x3.2 (-0708) 1 400x3.2x20 9.0x3.2 (-0757) 1 400x3.2x25.4 9.0x3.2 -0807 1 400x3.2x25.4 9.0x3.2 (-0856) 1 400x3.2x25.4 9.0x3.2 -0906 1 450x3.2x25.4 9.0x3.2 (-0955) 1 500x3.2x25.4 9.0x3.2 (-1003) 1 500x3.8x25.4 9.0x3.8 (-1102) 1 600x4.4x25.4 9.0x4.4 (-1201) 1

Diamond cut-off blade

"Norton" Explorer 4x4. For cutting of several different materials such as reinforced concrete, granite, asphalt, and steel up to 5 mm in thickness with one and the same blade, saving time for each change of wheel or machine for different materials. Explorer 4x4 also has a patent pending system that indicates the cutting depth. Laser welded segments. For dry and wet cutting. For use in machines with a 22.23 mm spindle diameter we recommend the Quick Fix metal bush. Quick Fix. Metal bush for hole reduction from 25.4 or 22.23 mm to 20 mm (reversible) and from 25.4 mm to 22.23 mm. Diam.xthickSegment Art. no. Pack. nessxhole height x width mm mm 13872 qty 300x2.8x20 10.0x2.8 (-0206) 1 300x2.8x25.4 10.0x2.8 (-0305) 1 350x3.0x20 10.0x3.0 (-0404) 1 350x3.0x25.4 10.0x3.0 (-0503) 1 Bush Quick Fix 13872 (-0602) (-0701) For hole reduction mm 25.4 or 22.23 to 20 25.4 to 22.23 Pack. qty 1 1

191

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 192 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools For table saws Diamond cut-off blade

"Norton Durator" Professional Duo TS. Wide range of applications - concrete stone, cover stone, paving stone, clinker, roof-tiles, stone slabs. Highly effective diamond blade with very long service life and very high cutting speed. For medium hard - hard material. Gives equally fine sectional areas as those from a blade with continuous rim. Cooling pauses are not necessary. Laser welded, tight segmentation. For wet cutting. Max. peripheral speed 80 m/sec. Diam.xthickSegment Art. no Pack nessxhole height x width mm mm 12077 qty 300x2.8x30/25.4 12.0x2.8 -0102 1 350x2.8x30/25.4 12.0x2.8 -0201 1 380x2.8x25.4 10.0x2.8 (-0300) 1 400x3.2x25.4 10.0x3.2 -0409 1 400x3.2x25.4 10.0x3.2 (-0508) 1

Diamond cut-off blade

"Norton Durator" Classic Uni TS. Wide range of applications - concrete stone, cover stone, paving stone, rooftiles, stone slabs, kerbstones, pantiles. For demanding cutting of medium hard material. Laser welded, segmented. For wet cutting. Max. peripheral speed 80 m/sec. Diam.xthickSegment Art. no Pack nessxhole height x width mm mm 12078 qty 300x2.5x25.4 10.0x2.5 -0101 1 350x2.8x25.4 10.0x2.8 -0200 1 400x3.2x25.4 7.0x3.2 -0309 1

Diamond cut-off blade

"Norton Durator" Professional Granite. For granite, marble, hard clinkers and slate. High cutting capacity and long service life. Very fine cut, ideal for hard material. Laser welded, segmented. For wet cutting. Max. peripheral speed 80 m/sec. Diam.xthickSegment Art. no Pack nessxhole height x width mm mm 12079 qty 300x2.5x25.4 10.0x2.5 -0100 1 350x2.8x25.4 10.0x2.8 -0209 1 380x2.8x25.4 10.0x2.8 (-0308) 1

Diamond cut-off blade

"Norton Durator" Professional Ceram. For ceramics and very compact material, thin marble and granite slabs, glazed stone slabs etc. Extremely long service life and very high cutting capacity in hard material. Sintered, continuous rim. For wet cutting. Max. peripheral speed 80 m/s. Diam.xthickSegment Art. no Pack nessxhole height x width mm mm 12080 qty 150x1.6x22.2 5.0x1.6 -0107 1 150x1.7x22.2 5.0x1.7 (-0156) 1 180x1.6x22.2 5.0x1.6 -0206 1 180x1.6x25.4 5.0x1.7 -0305 1 200x1.7x25.4 5.0x1.6 -0404 1 200x1.6x30 5.0x1.6 -0503 1 250x1.6x25.4 5.0x1.6 -0602 1 300x2.0x25.4 5.0x2.0 -0701 1 350x2.4x25.4 5.0x2.4 -0800 1

Diamond grinding cups For angle grinders Diamond grinding cup

"Norton Durator" Diamond grinding cup for angle grinders giving fast, smooth and effective grinding of uneven surfaces. Can be used for all types of building materials. With double segment rim which give a longer life and improved surface finish. Professional CG2. Tapered. Professional CGF2. Flat. Diam.xhole Type Art. no. Pack. mm 13869 qty Type CG2 100x22.2 Tapered -0102 1 125x22.2 Tapered -0201 1 180x22.2 Tapered -0300 1 Type CGF2 125x22.2 Flat (-0409) 1 192

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 193 Friday, March 27, 2009 11:08 AM

Grinding tools "Norton Durator" Professional CGT Turbo. Flat diamond grinding cup for quick and very smooth, efficient grinding of uneven surfaces. Can be used for all types of building materials. The special placement of the segment gives a very fine surface and long life. Brazed segments. Segmented. For dry grinding. Diam.xhole Art. no. Pack. mm 13870 qty 100x22.2 (-0109) 1 125x22.2 (-0208) 1 180x22.2 (-0307) 1

Diamond grinding cup

"Norton Durator" Professional CGFT Flow Turbo. Flat diamond grinding cup for quick and efficient grinding of uneven surfaces. Can be used for all types of building materials. The special design gives efficient removal of cuttings and a very low weight as well as minimal vibration. Brazed segments. Segmented. For dry grinding. Diam.xhole Art. no. Pack. mm 13871 qty 105x22.2 (-0108) 1 125x22.2 (-0207) 1 150x22.2/19 (-0306) 1 180x22.2 (-0405) 1

Files - Grinding tools

Diamond grinding cup

3

Grinding spindles Grinding spindle

Adapted for grinding wheels, buffing wheels, steel brushes, etc. for mounting in portable drills. Straight shank. Art. no. 3177 -0209 -0308 Fixing pin diameter mm 6 8 For wheels with centre holes mm 10 13 For wheels with max. thickness mm 19 20 For wheels with diameter max. mm 80 100 Washer diameter mm 30 30 For max. speed r/min 3000 3000 Pack. qty 6 6

Grinding spindle

Precision design - for among others, compressed air machines. For mounting grinding and cut-off wheels. Straight shank. Suitable cut-off discs see 10742. Art. no. 9492 -0105 -0204 For wheels with centre holes mm 8 10 For wheel with max. thickness mm 6 6 For wheels with max. diameter mm 80 80 Washer diameter mm 25 25 Fixing pin diameter mm 6 6 For max. speed r/min 25000 25000 Pack. qty 10 10

Back-up pad Support cup

With internal thread for direct assembly on the machine spindles. Relatively flexible. Suitable for fibre discs. Art. no. 3181 -0013 -0039 -0062 -0104 -0203 For fibre discs diam. mm 115 125 125 175 175 Max. speed r/min 11500 11000 11000 8600 8600 Hole thread M 14 M 14 UNC 5/8 M 14 UNC 5/8 Pack. qty 10 10 10 10 10

Support cup

"Norton" Air cooled support pad for fibre discs. Its heavy-duty design gives significantly higher removal and longer life. In addition, air cooling means less risk of burns Hard is recommended for grit 16-50 and Medium is recommended for grit 60-120. Art. no. 4543 (-0923) (-0956) (-0972) (-1004) (-1053) Dimensions mm 100x22 115x22 115x22 125x22 125x22 Hardness Hard Medium Hard Medium Hard Thread M14 M14 M14 M14 M14 Pack. qty 1 1 1 1 1 Art. no. 4543 -1301 (-1103) (-1202) (-1251) -1400 Dimensions mm 125x22 178x22 178x22 178x22 178x22 Hardness Medium Medium Hard Extra hard Medium Thread 5/8" M14 M14 M14 5/8" Pack. qty 1 1 1 1 1 193

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 194 Friday, March 27, 2009 11:08 AM

Grinding tools Support cup

Files - Grinding tools

3

With a smooth surface and approx. 14 mm flexible, resilient back. For self-adhesive sanding discs. With internal thread for direct assembly on the machine spindles. Art. no. 3033 -0104 -0203 Diameter mm 125 150 Hole thread M14 M14 Pack. qty 1 1

Support cup

With a Velcro surface and approx. 14 mm flexible, resilient back. For sanding discs, polishing hats, etc. With internal thread for direct assembly on the machine spindles. Art. no. 4610 -0657 -0707 Attachment thread M 14 M 14 Diameter mm 125 150 Pack. qty 1 1

Support cup

"Norton" Base plates for Velcro discs. Art. no. 13863 Attachment thread mm Diameter mm Hole mm Hardness Pack. qty Art. no. 13863 Attachment thread mm Diameter mm Hole mm Hardness Pack. qty

-0108 5/16" and M8 150 Holeless Medium 3 -0504 5/16" and M8 150 8+1 Soft 3

-0207 5/16" and M8 150 6+1 Soft 3 -0603 5/16" and M8 150 8+1 Medium 3

-0306 5/16" and M8 150 6+1 Medium 3 -0702 5/16" and M8 150 8+1 Hard 3

-0405 5/16" and M8 150 6+1 Hard 3 -0801 5/16" and M8 150 14 + 1 Medium 3

Sandpaper discs Sandpaper discs

"Norton" Coated with aluminium oxide and phenolic resin bound. For machine sanding of wood and metal. With Velcro back.8 dust extraction holes. Suitable for Bosch PEX 115 and 125, Ryobi RS 115, Metabo SXE 125, Atlas Copco EX 400 and EXE 400. GritDiameter 125 mm QualArt. no. Pack. size ity 6615 qty 36 H 231 -6001 100 50 H231 -6100 100 80 H231 -6209 100 120 H231 -6407 100 180 H231 -6605 100 240 H231 -6704 100 320 H231 -6803 100

Self-adhesive Sandpaper discs self-adhesive

"Norton" For portable buffing machines. Coated with aluminium oxide and phenolic resin bound. Equipped with protective paper between each disc. For removal of old varnish. Smoothing of plastic and spray filler. Adalox H 231.Strong back. Sparsely coated. Phenolic resin bound. Coarseness

Quality

grit 40 60 100 180

H 231 H 231 H231 H231

125 mm diam. 25 pack. Art. no. Quantity 3188 f -4208 1 -0800 1 Coarseness

150 mm diam. 25 pack. Art. no. Quantity 3188 qty -1105 1 -1204 1 -1303 1 -1352 1 Quality

grit 60 100

194

H231 H231

178 mm diam. 250 mm diam. 300 mm diam. 25 pack 5 pack. 5 pack. Art. no. Quantity Art. no. Quantity Art. no. Pack. 3188 pack*) 3188 qty 3188 qty -4109 1 -2202 1 -0040 1 -4208 1 -0065 1 -0065 1 -4307 1 200 mm diam. 230 mm diam. 25 pack. 25 pack. Art. no. Quantity Art. no. Pack. 3188 f 3188 f -2509 1 -2806 1 -2608 1 -2905 1

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 195 Friday, March 27, 2009 11:08 AM

Grinding tools "Norton" Blue Fire H835. Very strong paper backing covered with Norzon abrasive. Recommended for exacting grinding of plate, glass fibre, varnish and filler. Each disc is equipped with protective paper. Champagne Magnum. Strong and good quality manufactured of fibre reinforced latex paper for highest durability and flexibility. For fine and intermediate grinding of varnish, filler, primer and plastic. Coated with a surface layer of stearate that effectively counteracts clogging. On a reel without protective paper (100 discs per reel). GritQuality Diameter Without hole With 6 holes Art. no. Pack. Art. no. Pack. size mm qty qty 40 R 815 150 3689-0101 100 3689-2008 100 60 R 815 150 3689-0200 100 3689-2107 100 80 R 815 150 3689-0309 100 3689-2206 100 40 Blue Fire H835 150 14512-0101 100 14512-0408 100 60 Blue Fire H835 150 14512-0200 100 14512-0507 100 80 Blue Fire H835 150 14512-0309 100 14512-0606 100 80 Champagne Magnum 150 13910-0101 6 13910-1406 6 100 Champagne Magnum 150 (!3910-0200) 6 (13910-1505) 6 120 Champagne Magnum 150 13910-0309 6 13910-1604 6 150 Champagne Magnum 150 13910-0408 6 13910-1703 6 180 Champagne Magnum 150 13910-0507 6 13910-1802 6 220 Champagne Magnum 150 (!3910-0606) 6 (13910-1901) 6 240 Champagne Magnum 150 13910-0705 6 13910-2008 6 280 Champagne Magnum 150 (!3910-0804) 6 (13910-2107) 6 320 Champagne Magnum 150 13910-0903 6 13910-2206 6 400 Champagne Magnum 150 (!39101000) 6 (13910-2305) 6 500 Champagne Magnum 150 (!3910-1109) 6 6 600 Champagne Magnum 150 (!3910-1208) 6 (13910-2404) 6 800 Champagne Magnum 150 (!3910-1307) 6 6

Files - Grinding tools

Sandpaper discs, self-adhesive

3

With Velcro back Sandpaper discs with Velcro back

"Norton" For portable buffing machines. For sanding wood, metal, plastic, varnish etc. H815 Norzon. With strong back. Sparsely coated. Phenolic resin bound. For heavy-duty portable and machine sanding of sheet, glass fibre and wood. MAX A295. Flexible and durable back. With filling agent that effectively counteracts clogging. Sparsely coated. For portable or machine sanding when painting and varnishing as well as when polishing soft materials. GritQual. 150 mm Without hole 150 mm 6 dust ex150 mm 9 dust exArt. no. Pack. traction holes traction holes Art. no. Pack. Art. no. Pack. size 4442 qty 4442 4442 qty 40 H815 -2004 100 -3002 100 40 H835 -2053 25 60 H815 -2103 100 -3101 100 80 H815 -2202 100 -3200 100 80 MAX A295 -5007 100 -6104 100 -8001 100 100 MAX A295 -5106 100 -6203 100 (-8100) 100 120 MAX A295 -5205 100 -6302 100 -8209 100 150 MAX A295 -5304 100 -6401 100 (-8308) 100 180 MAX A295 -5403 100 -6500 100 -8407 100 220 MAX A295 (-5502) 100 (-6609) 100 (-8506) 100 240 MAX A295 -5601 100 -6708 100 (-8605) 100 280 MAX A295 (-5700) 100 (-6807) 100 (-8704) 100 320 MAX A295 (-5809) 100 (-6906) 100 (-8803) 100 360 MAX A295 (-5908) 100 (-7003) 100 (-8902) 100 400 MAX A295 (-6005) 100 (-7102) 100 (-9009) 100 500 MAX A295 (-0925) 100 (-1964) 100 (-9108) 100 800 MAX A295 (-0933) 100 (-1972) 100 (-9306) 100

195

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 196 Friday, March 27, 2009 11:08 AM

Grinding tools Sandpaper discs with Velcro back

Files - Grinding tools

3

"Norton" Blue Fire H835. Very strong paper backing covered with Norzon abrasive. Recommended for exacting grinding of plate, glass fibre, varnish and filler. Norton Pro. Strong and good quality with fibre reinforced latex backing for fine and intermediate sanding of paint, varnish, filler, primer, epoxy, plastic and metal and hardwoods (both wet and dry sanding). Coated with filler that effectively counteracts clogging. Has a very large resistance to ripping, giving exceptionally long life. The filler and bonding agent are completely colourless, which eliminates unwanted colouring of the work piece. GritQuality DiaWithout hole With 6 + 1 hole (14 mm) With 8 + 1 hole (18 mm) meter Art. no. Pack. Art. no. Pack. Art. no. Pack. size mm qty qty 40 H 815 Norzon 150 4442-3002 100 40 H 835 Norzon 150 4442-2053 25 60 H 815 Norzon 150 4442-2103 100 4442-3101 100 80 H 815 Norzon 150 4442-2202 100 4442-3200 100 40 Blue Fire H835 150 14513-0100 25 14513-0506 25 14513-0902 25 60 Blue Fire H835 150 14513-0209 25 14513-0605 25 14513-1009 25 80 Blue Fire H835 150 14513-0308 50 14513-0704 50 14513-1108 50 120 Blue Fire H835 150 (14513-0407) 50 (14513-1207) 50 80 Norton Pro 150 13909-0104 100 13909-1508 100 13909-2902 100 100 Norton Pro 150 13909-0203 100 13909-1607 100 (13909-3009) 100 120 Norton Pro 150 13909-0302 100 13909-1706 100 13909-3108 100 150 Norton Pro 150 13909-0401 100 13909-1805 100 (13909-3207) 100 180 Norton Pro 150 13909-0500 100 13909-1904 100 13909-3306 100 220 Norton Pro 150 (13909-0609) 100 (13909-2001) 100 (13909-3405) 100 240 Norton Pro 150 13909-0708 100 13909-2100 100 13909-3504 100 280 Norton Pro 150 (13909-0807) 100 (13909-2209) 100 (13909-3603) 100 320 Norton Pro 150 13909-0906 100 13909-2308 100 (13909-3702) 100 360 Norton Pro 150 (13909-1003) 100 (13909-2407) 100 (13909-3801) 100 400 Norton Pro 150 13909-1102 100 13909-2506 100 (13909-3900) 100 500 Norton Pro 150 13909-1201 100 13909-2605 100 (13909-4007) 100 600 Norton Pro 150 13909-1300 100 13909-2704 100 (13909-4106) 100 800 Norton Pro 150 13909-1409 100 13909-2803 100 (13909-4205) 100

Backing pad with Velcro back

"Norton" Backing pad for Velcro backed discs. "Male-part" with self-adhesive back for attaching on the machines base plate. For discs without holes or discs with 6 dust extraction holes. Art. no. 4442 -2970 -3978 For discs without hole 6 dust ex-traction holes Diameter mm 150 150 No of backing pads per pack. 2 2 Quantity pack. per card. 10 10

Fibre discs Fibre discs AVOS

"Norton" AVOS The unique combination of a triangular shape and a special hole pattern on the base plate and disc means that you can see the work surface through the disc during sanding. This means an operator can watch and check the result continuously during sanding, which can then be done quicker. The triangular shape of the disc in combination with the hole pattern also allows a sanding circle always has very short stoppages. During these short breaks where no sanding takes place, ground material and consumed grit is removed from the sanding surface, which reduces heat development by up to 25% i.e. significantly colder sanding. Other important benefits are improved surface finish, faster sanding, longer life and more comfortable working position. Used for sanding welds, deburring and light form sanding, finishing, cleaning, polishing, rust and paint removal etc. Note to achieve the best result at working angle of 5° - 15° should be used. Furthermore, you should observe caution when sanding in corners. Max. peripheral speed 80 m/s. F 827 Norzon. With long life and high cut rate. Used on all types of steel, especially stainless steel. DSB1-Bear-Tex. For light sanding, deburring, oxide removal, cleaning and polishing. Support plate 3090 -2100 For angle grinders mm 115/125 Thread M 14 Pack qty 5 GritF 944 SG F 827 Norzon F 827 Norzon size Speed: Rec. 10500 Max. 10500 Speed: Rec. 10500 Max. 13300 Speed: Rec. 10500 Max. 13300 ness Art. no Pack Art. no Pack Art. no Pack 3090 qty 3090 qty 3090 qty 36 -0153 100 -0609 100 -3207 25 50 -0708 100 -3306 25 60 -0351 100 -0807 100 -3405 25 80 -0401 100 -0906 100 -3504 25 120 -1110 100 -3702 25 Abrasive disc DSB1-Bear-Tex 3090 -1805 -1904 -2050 Coarseness C M VF Correspond. grit size approx 80 120 320 Pack qty 30 30 30 196

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 197 Friday, March 27, 2009 11:08 AM

Grinding tools

36 60 80 Abrasive disc DSB1-Bear-Tex Coarseness Correspond. grit size Pack

-2704 -2902 -3058 3090 approx qty

F 944 SG Speed: rec. 10500, max. 13300 Art. no Pack 3090 qty 25 25 25 -4403 -4502 -4601 C M VF 80 120 320 10 10 10

Fibre discs

"Norton" F975 Greenlyte. A heavy duty fibre discs coated with the latest generation of SG-abrasive that gives maximum removal and life. Primarily recommended for grinding iron, steel and castings. Ideally suited for high power machines together with an air cooled back-up pad. Max. peripheral speed 80 m/s. Recommended working speed: Iron and steel 60-80 m/s, castings 50-60 m/s. F971 Greenlyte Plus. A heavy duty fibre discs coated with the latest generation of SG-abrasive and an extra filling agent (supersize) that reduces thermal development, which reduces the risk of burning in combination with maximal removal and life. Primarily recommended for grinding stainless steel, hardened steel and non-ferrous metals. Ideally suited for high power machines together with an air cooled back-up pad. Max. peripheral speed 80 m/s. Recommended working speed: Steel 60-80 m/s, stainless steel 50-60 m/s, aluminium, copper, etc. 50-60 m/s. GritF975 Greenlyte size 115x22 mm 127x22 mm 180x22 mm 180x22 mm rec. speed 9800 r/min rec. speed 8500 r/min rec. speed 6500 r/min rec. speed 6500 r/min max. speed 13000 r/min max. speed12200 r/min max. speed 8500 r/min max. speed 8500 r/min Art. no Pack Art. no Pack Art. no Pack Art. no Pack 12959 qty 12959 qty 12959 qty 12959 qty 36 -0105 25 -0501 25 -0907 25 -1301 100 50 -0204 25 -0600 25 -1004 25 -1400 100 60 -0303 25 -0709 25 -1103 25 -1509 100 80 -0402 25 -0808 25 -1202 25 -1608 100 GritF971 Greenlyte Plus size 115x22 mm 127x22 mm 180x22 mm 180x22 mm ness rec. speed 9800 r/min rec. speed 8500 r/min rec. speed 6500 r/min rec. speed 6500 r/min max. speed 13000 r/min max. speed 12200 r/min max. speed 8500 r/min max. speed 8500 r/min Art. no Pack Art. no Pack Art. no Pack Art. no Pack 12959 qty 12959 qty 12959 qty 12959 qty 36 (-2101) 25 -2507 25 -2903 25 (-3307) 100 50 (-2200) 25 -2606 25 -3000 25 (-3406) 100 60 (-2309) 25 -2705 25 -3109 25 (-3505) 100 80 (-2408) 25 -2804 25 -3208 25 (-3604) 100

Files - Grinding tools

Grit-size

3

Fibre discs

"Norton" Metalite F 296. Special discs for grinding high-grade or stainless steel. Max. peripheral speed 80 m/s. Grit127×22 mm 180×22 mm size rec. speed 8500 rec. speed 6000 ness max. speed 12200 max. speed 8500 Art. no Pack Art. no Pack 3634 qty 3634 qty 36 -0107 100 -0503 100 50 -0206 100 -0602 100 60 -0305 100 -0701 100 80 -0404 100 -0800 100

Fibre discs

"Norton" Norzon F 827. Densely coated. For sanding iron, steel and other metals. Slotted holes. Max. peripheral speed 80 m/s. Grit127×22 mm 127×22 mm 180×22 mm 180×22 mm size Speed: Speed: Speed: Speed: ness rec.8500 rec. 8500 rec. 6000 rec. 6000 max.12200 max. 12200 max. 8500 max. 8500 Art. no Pack Art. no Pack Art. no Pack Art. no Pack 3602 qty 4516 qty 4516 qty 4516 qty 24 -0600 25 -0801 100 -3003 25 -1502 25 36 -0709 25 -0900 100 -3102 25 -1601 100 50 -0808 25 -1007 100 -3201 25 -1700 25 60 -0907 25 -1106 100 -3300 25 -1809 25 80 -1004 25 -1205 100 -3409 25 -1908 100 100 (-3508) 25 120 -1053 25 -1403 100 -3607 25 -2005 25 197

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 198 Friday, March 27, 2009 11:08 AM

Grinding tools Fibre discs

Files - Grinding tools

3

"Norton" F861 Norzon. A heavy duty fibre discs especially selected for grinding stainless steel, toughened and highgrade steel. Coated with Norzon abrasive and an extra filling agent (supersize) which reduces thermal development, giving colder grinding and a longer life. Max. peripheral speed 80 m/s. Recommended working speed: steel 60-80 m/s, stainless steel 50-60 m/s, aluminium, copper, etc. 50-60 m/s. Grit125x22 mm 180x22 mm size Speed: Speed: ness rec. 8500 rec. 6000 max. 12200 max. 8500 Art. no. Pack. Art. no. Pack. 13960 qty 13960 qty 36 -0605 25 -1108 25 50 -0704 25 -1207 25 60 -0803 25 -1306 25 80 -0902 25 -1405 25

Fibre discs

"Norton" F228. For sanding iron, steel and other metals. Slotted holes. Max. peripheral speed 80 m/s. Grit127×22 mm 180×22 mm size Speed: Speed: rec.8500 rec.6000 max.12200 max.8500 ness Art. no Pack Art. no Pack 10006 qty 10006 qty 24 -0904 25 -1704 25 36 -1001 25 -1803 25 50 -1209 25 -2009 25 60 -1308 25 -2108 25 80 -1407 25 -2207 25 120 -1605 25 -2405 25

Flap discs Flap discs

"Norton" Blue Star. Recommended for exacting grinding/rounding on iron, steel and stainless steel. Ideal for both fine grinding with the full area and for grinding with a high peripheral working pressure. The flaps are made of strong cotton/polyester abrasive cloth, resistant to ripping, coated with Norzon abrasive, which gives a very large removal rate and a long life. Iron-free. Max peripheral speed 80 m/s. Recommended working speed 50-65 m/s, GritFlat 125x22 mm Max. speed: 12200 r/min Art. no. Pack. size 14477 qty 40 -2001 10 60 -2100 10 60 -2209 10 120 (-2308) 10 GritConvex 115x22 mm 125x22 mm 180x22 mm Max. speed: 13300 r/min Max. speed: 12200 r/min Max. speed: 8500 r/min Art. no. Pack. Art. no. Pack. Art. no. Pack. size 14477 qty 14477 qty 14477 qty 36 -0104 10 -0609 10 -1102 10 40 -0203 10 -0708 10 -1201 10 60 -0302 10 -0807 10 -1300 10 80 -0401 10 -0906 10 -1409 10 120 -0500 10 (-1003) 10 -1508 10

Flap discs

"Norton" Jumbo. Recommended for exacting grinding/rounding on iron, steel and stainless steel. Ideal for both grinding with the full area and for grinding with a high peripheral working pressure. Jumbo has a greater quantity of extra long abrasive sheet flaps and thus contains significantly more abrasive, which increases the life span by at least 30%. The flaps are made of strong cotton/polyester abrasive cloth, resistant to ripping, coated with Norzon abrasive, which gives a very large removal rate and a long life. Iron-free. Max peripheral speed 80 m/s. Recommended working speed 50-65 m/s. GritConvex 115x22 mm 125x22 mm 180x22 mm Max. speed: 13300 r/min Max. speed: 12200 r/min Max. speed: 8500 r/min Art. no. Pack. Art. no. Pack. Art. no. Pack. size 14478 qty 14478 qty 14478 qty 40 (-0103) 10 -0400 10 (-0707) 10 60 (-0202) 10 -0509 10 (-0806) 10 80 (-0301) 10 -0608 10 (-0905) 10 198

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 199 Friday, March 27, 2009 11:08 AM

Grinding tools "Norton" Flexi-flap. Flexible flap disc that with is angled flaps allows grinding with immense flexibility. The flaps are mounted in the upright position and are at an angle from the hub. Generally constructed as a standard flap disc, which means long life and a constant grinding result throughout the flap discs entire life. The flaps are extremely flexible and adapt to the work piece during use. The open mounting of the flaps means that more air enters and gives cooler grinding. Max working speed 80 m/sec. The following working speeds are recommended to give the best working results: 115 mm - 6000-8000 r/min, 125 mm - 5500-7500 r/min. Grit115×22 mm 125×22 mm Max. speed 13300 r/min Max. speed 12200 r/min Art. no. Pack. Art. no. Pack. size 11733 qty 11733 qty 40 -0100 10 -0407 10 60 -0209 10 -0506 10 80 -0308 10 -0605 10

Quick discs

Files - Grinding tools

Flap discs

3

Quick disc

"Norton" Flexi-flap. TR. Type Roloc. Flexible flap disc, mini, for grinding in confined spaces, and that allow highly flexible grinding in most materials due to the angled flaps. The flaps are mounted in an upright position and are at an angle to the hub, otherwise it is designed as a normal flap disc, which means a long working life and consistent grinding results over the entire working life of the flap disc. The flaps are extremely flexible and conformable in relation to the work piece. The loose mounting of the flaps allows in more air and provides for cooler grinding. Holder 13202 -0900 -1007 For disc diameter mm 50 50 Spindle diameter mm 6.00 6.00 Max. speed rpm 30000 30000 Pack qty 1 1 GritDiameter 50 mm Rec. speed 7500-9500 r/min Art. no Pack size 11732 qty 40 -0101 10 60 -0200 10 80 -0309 10

Quick disc

"Norton" Mini-flap. TR. Type Roloc. Flap disc, mini. For grinding in confined spaces in most materials. Built-up of rectangular abrasive cloth flaps, overlapping each other and bonded on a reinforced fibre backing. The holder consists of a spindle with a support disc of rubber. Discs are changed extremely quickly. GritDiameter 50 mm Diameter 75 mm Rec. speed 7500-9500 r/min Rec. speed 4400-5800 r/min Art. no Pack Art. no Pack size 11731 qty 11731 qty 40 -0102 10 -0409 10 60 -0201 10 -0508 10 80 -0300 10 -0607 10 Holder 13202 -0900 -1007 -1106 -1205 -1304 For disc diameter mm 50 50 75 75 75 Spindle diameter mm 6.00 6.00 6.00 M14 thread M14 thread Max. speed rpm 30000 30000 20000 11200 20000 Pack qty 1 1 1 1 1

Quick disc Ceramic Fibre

"Norton" TR. Type Roloc. SG Ceramic Fibre. Speed-Lok disc coated with SG-abrasive and very strong design with a backing made of fibre material, which makes this disc the most powerful. Recommended for alloys that are difficult to grind and operations that require a rigid and aggressive disc with very high removal. Exceptionally long life and minimal ripping. GritDiameter 50 mm Diameter 75 mm Rec. working speed 7500-9500 r/min Rec. working speed 4400-5800 r/min Art. no. Pack. Art. no. Pack. size 13194 qty 13194 qty 36 -5107 50 -5602 50 50 -5206 50 -5701 50 60 -5305 50 -5800 50 80 -5404 50 -5909 50 120 -5503 50 -6006 50 Holder 13202 -0900 -1007 -1106 -1205 -1304 For disc diameter mm 50 50 75 75 75 Spindle diameter mm 6.0 6.0 6.0 M 14 M 14 Type Medium Hard Medium Medium plastic Medium rubber Max. speed rpm 30000 30000 20000 11200 20000 Pack. qty 1 1 1 1 1 199

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 200 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Quick disc Zircon Plus

"Norton" TR. Type Roloc. Zircon Plus. Speed-Lok disc coated with Zircon-abrasive and strong design with a backing of Y-thickness in double layers. Recommended for grinding and deburring stainless steel. Coated with an extra filler agent (supersize) that reduce heat development, resulting in cooler grinding and a longer life. High removal rate in coarse grit sizes. GritDiameter 38 mm Diameter 50 mm Diameter 75 mm Rec. working speed Rec. working speed Rec. working speed 9500-12000 r/min 7500-9500 r/min 4400-5800 r/min Art. no. Pack. Art. no. Pack. Art. no. Pack. size 13194 qty 13194 qty 13194 qty 36 -2104 50 -2609 50 -3102 50 50 -2203 50 -2708 50 -3201 50 60 -2302 50 -2807 100 -3300 50 80 -2401 50 -2906 50 -3409 50 120 -2500 50 -3003 50 -3508 50 Holder 13202 -0801 -0900 -1007 -1106 -1205 -1304 For disc diameter mm 38 50 50 75 75 75 Spindle diameter mm 6.0 6.0 6.0 6.0 M 14 thread M 14 thread Type Medium Medium Hard Medium Medium plastic Medium rubber Max. speed rpm 30000 30000 30000 20000 11200 20000 Pack. qty 1 1 1 1 1 1

Quick disc AL/OX

"Norton" TR. Type Roloc. AL. Speed-Lok disc coated with premium aluminium oxide abrasive and strong polyester backing of X-thickness. Recommended for general grinding of soft steel, low-grade carbon steel and other iron metals. Resistant to heat with a high removal rate. Good durability and long life. GritDiameter 38 mm Diameter 50 mm Diameter 75 mm Rec. working speed Rec. working speed Rec. working speed 9500-12000 r/min 7500-9500 r/min 4400-5800 r/min Art. no. Pack. Art. no. Pack. Art. no. Pack. size 13193 qty 13193 qty 13193 qty 36 -3103 50 -3707 50 -4507 50 50 -3202 50 -3806 50 -4606 50 60 -3301 50 -3905 50 -4705 50 80 -3400 50 -4002 50 -4804 50 120 -3509 50 -4101 50 -4903 50 180 -3608 50 -4200 50 -5009 50 240 -4309 50 320 -4408 50 Holder 13202 -0801 -0900 -1007 -1106 -1205 -1304 For disc diameter mm 38 50 50 75 75 75 Spindle diameter mm 6.0 6.0 6.0 6.0 M 14 M 14 Type Medium Medium Hard Medium Medium plastic Medium rubber Max. speed rpm 30000 30000 30000 20000 11200 20000 Pack. qty 1 1 1 1 1 1

Quick discs

"Norton" SG Ceramic. TS / Speed-Lok. Quick disc coated with SG-abrasive and strong design with a backing of Y-thickness. Coated with an extra filler material (supersize) that reduces heat development. Recommended for grinding heat sensitive materials. Good sharpness during the discs whole life and minimal clogging. Very good durability and long life. GritDiameter 38 mm Diameter 50 mm Diameter 75 mm Rec. working speed Rec. working speed Rec. working speed 9500-12000 r/min 7500-9500 r/min 4400-5800 r/min Art. no. Pack. Art. no. Pack. Art. no. Pack. size 13194 qty 13194 qty 13194 qty 36 -3607 50 -4100 50 -4605 50 50 -3706 50 -4209 50 -4704 50 60 -3805 50 -4308 50 -4803 50 80 -3904 50 -4407 50 -4902 50 120 -4001 50 -4506 50 -5008 50 Holder 13202 -0207 -0306 -0405 -0504 -0603 For disc diameter mm 38 50 50 75 75 Spindle diameter mm 6.0 6.0 6.0 6.0 6.0 Type Medium Medium Hard Medium Hard Max. speed rpm 30000 30000 30000 20000 11200 Pack. qty 1 1 1 1 1

200

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 201 Friday, March 27, 2009 11:08 AM

Grinding tools "Norton" TS. Type Speed-Lok. Zircon Plus. Speed-Lok disc coated with Zircon-abrasive and strong design with a backing of Y-thickness in double layers. Recommended for grinding and deburring stainless steel. Coated with extra filler agent (supersize) that reduce heat development, resulting in cooler grinding and a longer life. High removal rate in coarse grit sizes. GritDiameter 25 mm Diameter 38 mm Diameter 50 mm Diameter 75 mm Rec. working speed Rec. working speed Rec. working speed Rec. working speed 15000-18000 r/min 9500-12000 r/min 7500-9500 r/min 4400-5800 r/min Art. no. Pack. Art. no. Pack. Art. no. Pack. Art. no. Pack. size 13194 qty 13194 qty 13194 qty 13194 qty 36 -0157 50 -0603 50 -1106 50 -1601 50 50 -0207 50 -0702 50 -1205 50 -1700 50 60 -0306 50 -0801 50 -1304 50 -1809 50 80 -0405 50 -0900 50 -1403 50 -1908 50 120 -0504 50 -1007 50 -1502 50 -2005 50 Holder 13202 -0108 -0207 -0306 -0405 -0504 -0603 For disc diameter mm 25 38 50 50 75 75 Spindle diameter mm 6.0 6.0 6.0 6.0 6.0 6.0 Type Medium Medium Medium Hard Medium Hard Max. speed rpm 30000 30000 30000 30000 20000 11200 Pack. qty 1 1 1 1 1 1

Files - Grinding tools

Quick disc

3

Quick disc

"Norton" TS. Type Speed-Lok. AL. Speed-Lok disc coated with premium aluminium oxide abrasive and strong polyester backing of X-thickness. Recommended for general grinding of soft steel, low-grade carbon steel and other iron metals. Resistant to heat with a high removal rate. Good durability and long life. GritDiameter 25 mm Diameter 38 mm Diameter 50 mm Diameter 75 mm Rec. working speed Rec. working speed Rec. working speed Rec. working speed 15000-18000 r/min 9500-12000 r/min 7500-9500 r/min 4400-5800 r/min Art. no. Pack. Art. no. Pack. Art. no. Pack. Art. no. Pack. size 13193 qty 13193 qty 13193 qty 13193 qty 36 -0158 50 -0703 50 -1503 50 -2303 50 50 -0208 50 -0802 50 -1602 50 -2402 50 60 -0307 50 -0901 50 -1701 50 -2501 50 80 -0406 50 -1008 50 -1800 50 -2600 50 120 -0505 50 -1107 50 -1909 50 -2709 50 180 -0604 50 -1206 50 -2006 50 -2808 50 240 -1305 50 -2105 50 -2907 50 320 -1404 50 -2204 50 -3004 50 Holder 13202 -0108 -0207 -0306 -0405 -0504 -0603 For disc diameter mm 25 38 50 50 75 75 Spindle diameter mm 6.0 6.0 6.0 6.0 6.0 6.0 Type Medium Medium Medium Hard Medium Hard Max. speed rpm 30000 30000 30000 30000 20000 11200 Pack. qty 1 1 1 1 1 1

Coarse cleaning disc

"Norton" Bear-Tex. Rapid Strip / Strippa. TR. Type Roloc.For all types of coarse cleaning, oxide removal, preparations before welding, etc. on iron, steel and stainless steel, etc. Coarse Type Diameter 50 mm Diameter 75 mm ness Art. no. Pack. Art. no. Pack. 13200 qty 13200 qty Extra coarse Rapid Strip -0050 10 -0159 10 Coarse Strippa -0100 10 -0209 10 Holder 13202 -0900 -1007 -1106 -1205 -1304 For disc diameter mm 50 50 75 75 75 Spindle diameter mm 6.0 6.0 6.0 M 14 thread M 14 thread Type Medium Hard Medium Medium plastic Medium rubber Max. speed rpm 30000 30000 20000 11200 20000 Pack. qty 1 1 1 1 1

201

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 202 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools

Flap wheels Flap wheel Diam. Width Speed max. mm 30 30 30 40 50 50 60 60 80 80

mm 5 10 10 15 15 30 20 40 30 50

r/min 18000 18000 18000 14000 11000 11000 8000 8000 6000 6000

Shank

mm Ø6 Ø3 Ø6 Ø6 Ø6 Ø6 Ø6 Ø6 Ø6 Ø6

50 Art. no. Pack. 3156 qty -1400 10 -1509 10 -1608 10 -0170 10 -1004 10 -1707 10 -1806 10 -1905 10 -2002 10

Grit size 80 150 Art. no. Pack. Art. no. Pack. 3156 qty 3156 qty -0147 10 -0428 10 -0105 10 -0402 10 -0154 10 -0451 10 -0188 10 -0485 10 -0196 10 -0493 10 -1103 10 -1202 10 -0204 10 -0501 10 -0253 10 -0550 10 -0303 10 -0600 10 -0352 10 -0659 10

320 Art. no. Pack. 3156 qty -0725 10 -0709 10 -0758 10 -0782 10 -0790 10 -1301 10 -0808 10 -0857 10 -0907 10 -0956 10

Abrasive cloth pins Cylindrical Abrasive cloth pins, cylindrical

"Norton" A/OX. Abrasive cloth pin with a very broad application area including: removal of burrs, polishing, edging and removal of machining marks. The pin is worn down to the required shape. For grinding and polishing channels, fillets, slots, side walls and hole bottoms. Used together with a special holder. DimenSpeciGrit Art. no. Pack. sions fication mm 13204 qty 5x19x2.4 Al/Ox Type CRM2 120 -0106 100 6x25x3.2 Al/Ox Type CRM4 80 -0205 100 6x25x3.2 Al/Ox Type CRM4 120 -0304 100 6x38x3.2 Al/Ox Type CRM5 60 -1005 100 6x38x3.2 Al/Ox Type CRM5 80 -1104 100 6x38x3.2 Al/Ox Type CRM5 120 -1203 100 8x38x3.2 Al/Ox Type CRM5 80 -1302 100 10x25x3.2 Al/Ox Type CRM4 80 -0403 100 10x25x3.2 Al/Ox Type CRM4 120 -0502 100 10x38x3.2 Al/Ox Type CRM5 60 -1401 100 10x38x3.2 Al/Ox Type CRM5 80 -1500 100 10x38x3.2 Al/Ox Type CRM5 120 -1609 100 13x25x3.2 Al/Ox Type CRM4 80 -0601 100 13x25x3.2 Al/Ox Type CRM4 120 -0700 100 13x38x3.2 Al/Ox Type CRM5 80 -1708 100 13x38x3.2 Al/Ox Type CRM5 120 -1807 100 16x38x4.8 Al/Ox Type CRM7 80 -1906 100 19x25x4.8 Al/Ox Type CRM6 80 -0809 100 19x25x4.8 Al/Ox Type CRM6 120 -0908 100 19x50x4.8 Al/Ox Type CRM8 80 -2003 100 Holder 13208 -0102 -0201 -0300 Axle dia. x axle length x spindle dia. 2.4x25x3 3.2x13x6 3.2x19x6 For abrasive cloth pin type CRM2 CRM3 CRM4 Pack. qty 1 1 1 Holder 13208 -0409 -0508 -0607 Axle dia. x axle length x spindle dia. 3.2x25x6 4.8x19x6 4.8x25x6 For abrasive cloth pin type CRM5 CRM6 CRM7 Pack. qty 1 1 1 Holder 13208 -0706 Axle dia. x axle length x spindle dia. 4.8x38x6 For abrasive cloth pin type CRM8 Pack. qty 1

202

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 203 Friday, March 27, 2009 11:08 AM

Grinding tools

Abrasive cloth pins, tapered

"Norton" ALOX. Abrasive cloth pin with a very broad application area including: removal of burrs, polishing, edging and removal of machining marks. The pin is tapered from the tip to the base and wears down to the required shape. For grinding and polishing channels, fillets, radii and small profiles on metal components. Used together with a special holder. Dimensions Specification Grit Art. no. Pack. mm 13204 qty 10x25x3.2 Al/Ox Type CRM4 60 -2102 100 13x38x3.2 Al/Ox Type CRM5 80 -2300 100 13x38x3.2 Al/Ox Type CRM5 120 -2409 100 19x25x4.8 Al/Ox Type CRM6 60 -2201 100 19x38x3.2 Al/Ox Type CRM5 80 -2508 100 19x38x4.8 Al/Ox Type CRM7 80 -2607 100 19x38x4.8 Al/Ox Type CRM7 120 -2706 100 Holder 13208 -0300 -0409 -0508 -0607 Axle dia. x axle length x spindle dia. 3.2x19x6 3.2x25x6 4.8x19x6 4.8x25x6 For abrasive cloth pin type CRM4 CRM5 CRM6 CRM7 Pack. qty 1 1 1 1

Files - Grinding tools

Tapered

3

Set Abrasive cloth pins - set

"Norton" ALOX. Complete set containing 144 abrasive cloth pins, cylindrical and tapered in different dimensions and grit sizes and suitable holders. Abrasive cloth pin with a very broad application area including: removal of burrs, polishing, edging and removal of machining marks. The pin is worn down to the required shape. For grinding and polishing channels, fillets, slots, side walls and hole bottoms. Used together with a special holder. Art. no. 13204 -2805 No. of abrasive cloth pins ea. 144 Pack. qty 1

Abrasive cloth bands Sanding drum

Tapered expanding rubber bodies with round making and finishing in areas difficult to access. Rubber body 6955 Diameter mm Length mm Top radius mm Spindle diameter mm Total length mm Max. speed r/min Pack. qty Diam. Length

top and abrasive cloth sleeves for these. Intended for sanding for tool -1000 4.5/8 85 2.5 6 125 24000 5

-1109 9.5/13 85 5 6 125 17000 5 Abrasive sleeves 80-grit

mm 8 13 18

mm 85 85 85

Art. no. 6955 -0101 -0309 -0507

150-grit Pack. qty

25 25 25

-1208 14.5/18 85 7.5 6 125 12000 5

Art. no. 6955 -0200 -0408 -0606

Pack. qty 25 25 25

Sanding drum

Cylindrical, expanding rubber bodies and abrasive cloth sleeves for these. Intended for sanding for tool making and finishing in areas difficult to access. When fitting the rubber bodies with shank diameter 3 mm in machines with attachment diameter 6 mm collet 6711 is used. Rubber body 6718 -2006 -2105 -2204 -2303 -2402 Diameter mm 5 7 10 13 16 Length mm 10 12 15 17 26 Spindle diameter mm 3 3 3 3 3 Total length mm 35 37 40 42 51 Max. speed r/min 45000 32000 22000 17000 14000 Pack. qty 5 5 5 5 5 DiaLength Abrasive sleeves meter 80-grit 150-grit 320-grit Art. no. Pack. Art. no. Pack. Art. no. Pack. mm mm 6718 qty 6718 qty 6718 qty 5 10 -0109 25 -0208 25 -0307 25 7 12 -0406 25 -0505 25 -0604 25 10 15 -0703 25 -0802 25 -0901 25 203

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 204 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Diameter

Length

mm 13 16

mm 17 26

80-grit Art. no. Pack. 6718 qty -1008 25 -1305 25

Abrasive sleeves 150-grit Art. no. Pack. 6718 qty -1107 25 -1404 25

320-grit Art. no. Pack. 6718 qty -

Sanding drum

Cylindrical, expanding rubber bodies with round top and abrasive cloth sleeves for these. Intended for sanding for tool making and finishing in areas difficult to access. When fitting the rubber bodies with shank diameter 3 mm in machines with attachment diameter 6 mm collet 6711 is used. Rubber body 6942 -2004 -2103 -2202 -2301 -2400 Diameter mm 5 7 10 13 16 Length mm 11 13 15 19 26 Spindle diameter mm 3 3 3 3 3 Total length mm 36 38 40 44 51 Max. speed r/min 45000 32000 22000 17000 14000 Pack. qty 5 5 5 5 5 DiaLength Abrasive cloth sleeves meter 80-grit 150-grit 320-grit Art. no. Pack. Art. no. Pack. Art. no. Pack. mm mm 6942 qty 6942 qty 6942 qty 5 11 -0107 25 -0206 25 -0305 25 7 13 -0404 25 -0503 25 -0602 25 10 15 -0701 25 -0800 25 -0909 25 13 19 -1006 25 -1105 25 16 26 -1303 25 -1402 25 -

Sanding drum

Cylindrical, expanding rubber bodies with round top and abrasive cloth sleeves for these. Intended for sanding for tool making and finishing in areas difficult to access. Rubber body 6954 -1001 -1100 -1209 -1308 Diameter mm 5 11 16 21 Length mm 15 25 32 40 Top radius mm 2.5 5 7.5 9.5 Spindle diameter mm 6 6 6 6 Total length mm 55 65 72 80 Max. speed r/min 45000 24000 20000 18000 Pack. qty 5 5 5 5 DiaLength Abrasive cloth sleeves meter 80-grit 150-grit Art. no. Pack. Art. no. Pack. mm mm 6954 qty 6954 qty 5 15 -0102 25 -0201 25 11 25 -0300 25 -0409 25 16 32 -0508 25 -0607 25 21 40 -0706 25 -0805 25

Sanding drum

Cylindrical, pointed shape, expanding rubber bodies and abrasive cloth sleeves for these. Mainly intended for sanding for tool making and finishing in areas difficult to access. When fitting the rubber bodies with shank diameter 3 mm in machines with attachment diameter 6 mm collet 6711 is used. Rubber body 6946 -2109 -2208 -2406 Diameter mm 7 10 16 Length mm 13 15 26 Spindle diameter mm 3 3 3 Total length mm 38 40 51 Max. speed r/min 32000 22000 14000 Pack. qty 5 5 5 DiaLength Abrasive cloth sleeves meter 80-grit 150-grit Art. no. Pack. Art. no. Pack. mm mm 6946 qty 6946 qty 7 13 -0400 25 -0509 25 10 15 -0707 25 -0806 25 16 26 -1309 25 -1408 25

204

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 205 Friday, March 27, 2009 11:08 AM

Grinding tools Set of 640 abrasive cloth bands and 23 rubber bodies. Supplied in plastic assortment box. Art. no. 6966 -1007 No. of bands 640 No. of rubber bodies 23 Pack. sts 1

Abrasive cloth bands

"Norton" R822. Used for grinding, deburring and polishing of iron, steel, stainless steel and other metals in areas difficult to access. Used together with expanding holders. Recommended working speed 20-25 m/s. Diam. Length 36-grit 50-grit 80-grit 120-grit Art. no. Pack. Art. no. Pack. Art. no. Pack. Art. no. Pack. mm mm 3153 qty 3153 qty 3153 qty 3153 qty 20/14 63 -1684 100 -1106 100 -1759 100 -2351 100 36/22 60 -1833 100 -1254 100 -1866 100 -2401 100

Files - Grinding tools

Sanding drum

3

Abrasive cloth bands

"Norton" Norzon. Plus Abrasive cloth bands are built up of heavy-duty cloth that is coated with Norzon. Plus abrasive grit that gives the greatest possible life and removal. Used for grinding, deburring and polishing iron, steel, stainless steel and other metals in areas difficult to access. Used together with expanding holders. Recommended working speed 20-25 m/s. Diam. Length 36-grit 50-grit 80-grit 120-grit Art. no. Pack. Art. no. Pack. Art. no. Pack. Art. no. Pack. mm mm 12960 qty 12960 qty 12960 qty 12960 qty 13 25 -0102 50 -0201 50 -0300 50 -0409 50 15 30 -0508 50 -0607 50 -0706 50 -0805 50 19 25 -0904 50 -1001 50 -1100 50 -1209 50 22 20 -1308 50 -1407 50 -1506 50 -1605 50 25 25 -1704 50 -1803 50 -1902 50 -2009 50 30 30 -2108 50 -2207 50 -2306 50 -2405 50 38 25 -2504 50 -2603 50 -2702 50 -2801 50 45 30 -2900 50 -3007 50 -3106 50 -3205 50 51 25 -3304 50 -3403 50 -3502 50 -3601 50 100 40 -3700 25 -3809 25 -3908 25 -4005 25

Expanding sanding drum

"Norton" For mounting on fast running machines. The holder consists of a slotted rubber drum which expands due to centrifugal forces and secures the abrasive cloth band. Straight shank. Quick change bands. Intended for deburring and sanding in confined areas on iron, steel and other metals Diam. Length Spindle Speed Exp. holder diam. min.-max. Art. no. Pack. mm mm mm rpm 11734 qty 13 25 6 30000-36000 -0109 10 15 30 6 25000-36000 -0208 10 19 25 6 20000-30000 -0307 10 22 20 6 19000-28000 -0406 10 25 25 6 15000-22000 -0505 10 30 30 6 13000-19000 -0604 10 38 25 6 10000-15000 -0703 10 45 30 6 9000-13000 -0802 10 51 25 6 8000-11000 -0901 10 100 40 8 4000-5700 -0950 1 20/14*) 63 6 15000-22000 -1008 10 36/22*) 63 6 10000-16000 -1107 10 38/24*) 63 6 9000-15000 -1206 10

Overlapped and slotted discs Overlapped and slotted disc

"Norton" Overlapped and slotted discs. For fast and aggressive grinding, deburring, delustering, finishing and polishing on cylindrical walls, insides of pipes, openings and bottoms of slots and for bevelling drilled or punched holes. Consists of two interconnected discs of the same diameter held together by a centre washer with quick attachment. Used together with a special holder. GritDiameter 38 mm Diameter 50 mm Diameter 75 mm Diameter 100 mm Art. no. Suitable Pack. Art. no. Suitable Pack Art. no. Suitable Pack. Art. no. Suitable Pack size 13205 arbor qty 13205 arbor qty 13205 arbor qty 13205 arbor qty 60 -0105 MM32-4 10 -0303 MM32-4 10 -0501 MM20-4 10 -0709 MM20-4 10 120 -0204 MM32-4 10 -0402 MM32-4 10 -0600 MM20-4 10 -0808 MM20-4 10 Holder 13205 -1009 -1108 Type MM32-4 MM20-4 Spindle diameter mm 6.0 6.0 Pack. qty 1 1 205

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 206 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools

Abrasive pads Abrasive pad

"Norton" Abrasive pads. For quick grinding and deburring in confined areas, channels, fillets, corners and point sanding. Grind nearly as quickly as hard grinding wheels, yet significantly more flexible and easier to control. The corners of the abrasive pads continuously wear down and release new sharp grinding surfaces. Used together with a special holder. GritDiameter 38 mm Diameter 50 mm Diameter 75 mm Art. no. Suitable Pack. Art. no. Suitable Pack. Art. no. Suitable Pack. size 13206 arbor qty 13206 arbor qty 13206 arbor qty 60 -0104 MM32-4 10 -0302 MM32-4 10 -0500 MM20-4 10 120 -0203 MM32-4 10 -0401 MM32-4 10 -0609 MM20-4 10 Holder 13205 -1009 -1108 Type MM32-4 MM20-4 Spindle diameter mm 6.0 6.0 Pack. qty 1 1

Sanding stars Sanding star

"Norton" For grinding and polishing in confined areas. Used for deburring and smoothing of sharp edges on uneven components. Manufactured of very flexible abrasive cloth that gives pliable grinding and with aluminium oxide abrasives. Spindle diameter 6 mm. Art. no. 13207 -0103 -0202 -0301 -0400 Diameter mm 40 40 40 40 Grit size 80 120 240 320 Pack. qty 10 10 10 10 Art. no. 13207 -0509 -0608 -0707 -0806 Diameter mm 60 60 60 60 Grit size 80 120 240 320 Pack. qty 10 10 10 10 Art. no. 13207 -0905 -1002 -1101 -1200 Diameter mm 80 80 80 80 Grit size 80 120 240 320 Pack. qty 10 10 10 10 Art. no. 13207 -1309 -1408 -1507 -1606 Diameter mm 100 100 100 100 Grit size 80 120 240 320 Pack. qty 10 10 10 10

Abrasive belt wheels Expanding Abrasive belt wheel

For mounting on standard bench grinders. NOTE: Not belt sanders. Through centrifugal forces the slots on the wheel expand and hold the abrasive belt. The abrasive belt is easily replaceable. Designed according to the National Swedish Board of Occupational Safety and Health directions. Suitable working speed 25-36 m/s. Art. no. 3212 -0156 -0206 Diameter×thickness mm 150×50 196×50 Standard hole mm 20 20 Highest permitted speed r/min 4600 3500 Abrasive belt dimensions mm 50×473 50×618 Pack. qty 1 1

Abrasive belts Abrasive belts for abrasive belt wheel

"Norton" Abrasive belts suitable for expanding abrasive belt wheels 3212. SG RX22. Grit sizes 40-120. Metalite R 265. Grit size 240. For wheel AbrasiveGrit 40 Grit 50 diameter belts dim. Art. no. Pack. Art. no. Pack. mm mm 3221 qty 3221 qty 150 50×473 196 50×618 -2706 20 -2805 20 For wheel AbrasiveGrit 80 Grit 120 diameter belts dim. Art. no. Pack. Art. no. Pack. mm mm 3221 qty 3221 qty 150 50×473 -2508 20 -2607 20 196 50×618 -3001 20 -3100 20 206

Grit 60 Art. no. Pack. 3221 qty -2409 20 -2904 20 Grit 240 Art. no. Pack. 3212 qty -1907 20

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 207 Friday, March 27, 2009 11:08 AM

Grinding tools

Sanding block Made of cork. Art. no. Dimensions Pack.

3196 mm

-1006 90×65×25 5

Sanding block

DIY-pack sanding sponges. For dry and wet sanding of all materials. The abrasive sponge is flexible and with that suitable for both flat and contoured surfaces. Right-angled - good accessibility with angles and corners. Abrasive on four sides. Art. no. 9497 -1009 -1108 Coarseness Coarse/medium Medium/Fine Size mm 100×70×27 100×70×27 Pack. 12 12

Files - Grinding tools

Sanding blocks

3

Sanding block

"Norton" Sanding block of polyurethane for abrasive sheets with Velcro - size 70x125 mm. Art. no. 1993 -3704 Pack. qty 15

Abrasive sponge

"Norton" Abrasive sponges coated with silicon carbide (SiC.) on 2 sides, for dry and wet grinding of most materials. Can be washed to unclog. Art. no. 12819 -0402 -0501 -0600 Grit size 60 100 180 Size mm 123x98x12.5 123x98x12.5 123x98x12.5 Pack. qty 60 60 60

Steel wool Steel wool

For grinding and dulling enamelled surfaces, grinding and polishing metal before enamelling, etc. The steel wool should be used dry to sand wood. For polishing aluminium, metal, brass, etc. use the steel wool together with soap and water. Art. no. 4262 -2001 -2100 -2209 -2308 -2407 Size design. 000 00 0 1 2 Weight per roll g 200 200 200 200 200 Pack. qty 1 1 1 1 1

Abrasive sheets Abrasive cloth Abrasive cloth

"Norton" Metalite R222. With densely coated aluminium oxide. For sanding iron, steel and other metals. Sheet size 230×280 mm. Art. no. 3203 -0058 -0108 -0207 -0306 -0405 -0454 -0504 Grit sizes 36 50 60 80 100 120 150 Pack. qty 25 25 25 50 50 50 50 Art. no. 3203 -0553 -0579 -0603 -0702 -0801 -0900 Grit sizes 180 220 240 320 400 600 Pack. qty 50 50 50 50 50 50

Emery cloth Emery cloth

"Norton" K625. Coated with emery. Adhesive bound. For hand sanding metal. Sheet size 180×280 mm. Art. no. 8349 -0201 -0300 -0409 -0508 Coarseness Coarse Medium Fine Extra fine Grit size No 50 80 120 180 Pack. qty 50 50 50 50

207

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 208 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Wet abrasive papers Wet abrasive paper

"Norton" Tufbak Durite T489. With densely coated silicon carbide. Phenolic resin bound. Latex impregnated paper back. For wet and dry sanding of filler, painted and varnished surfaces. Sheet size 230×280 mm. Art. no. 3202 -0109 -0208 -0307 -0406 -0505 Grit size 80 100 120 150 180 Pack. qty 50 50 50 50 50 Art. no. 3202 -0604 -0653 -0752 -0802 -0901 Grit size 220 240 320 360 400 Pack. qty 50 50 50 50 50 Art. no. 3202 -0950 -1008 -1107 -1206 -1305 Grit size 500 600 800 1000 1200 Pack. qty 50 50 50 50 50

Paint removal sheets Dray sanding paper

"Norton" Norton Pro. Strong and good quality with fibre reinforced latex backing for fine and intermediate sanding of varnish, filler, primer, epoxy, plastic and metal and hardwoods (both wet and dry sanding). Coated with filler that effectively counteracts clogging. Very large resistance to ripping, giving exceptionally long life. The filler and bonding agent are completely colourless, which eliminates unwanted colouring of the work piece. Sheet size 230x280 mm. Art. no. 13901 -0102 -0201 -0300 -0409 -0508 Grit size 80 100 120 150 180 Pack. qty 100 100 100 100 100 Art. no. 13901 (-0607) -0706 (-0805) -0904 (-1001) Grit size 220 240 280 320 360 Pack. qty 100 100 100 100 100 Art. no. 13901 (-1100) (-1209) (-1308) (-1407) Grit size 400 500 600 800 Pack. qty 100 100 100 100

Paint removal sheets

"Norton" H 815 Norzon. Very strong paper backing covered with Norzon abrasive. Recommended for exacting sanding of wood, metal, glass fibre, paint and filler. Norton Pro. Strong and good quality with fibre reinforced latex backing for fine and intermediate sanding of varnish, filler, primer, epoxy, plastic and metal and hardwoods (both wet and dry sanding). Coated with filler that effectively counteracts clogging. Very large resistance to ripping, giving exceptionally long life. The filler and bonding agent are completely colourless, which eliminates unwanted colouring of the work piece. Dimensions Specification Grit Art. no. Pack. mm qty 70x125 H 815 Norzon 40 (1993-0106) 25 70x125 H 815 Norzon 60 (1993-0205) 25 70x125 Norton Pro 80 13902-0101 100 70x125 Norton Pro 100 13902-0200 100 70x125 Norton Pro 120 13902-0309 100 70x125 Norton Pro 150 13902-0408 100 70x125 Norton Pro 180 13902-0507 100 70x125 Norton Pro 220 (13902-0606) 100 70x125 Norton Pro 240 13902-0705 100 70x125 Norton Pro 280 (13902-0804) 100 70x125 Norton Pro 320 13902-0903 100 70x125 Norton Pro 360 (13902-1000) 100 70x125 Norton Pro 400 13902-1109 100 70x125 Norton Pro 500 13902-1208 100 70x125 Norton Pro 600 13902-1307 100 70x125 Norton Pro 800 13902-1406 100

Dry sanding papers (Emery-cloth) Dray sanding paper

"Norton" A621. Coated with emery. Adhesive bound. For polishing metal. Sheet size 230×280 mm. Art. no. 1630 -0105 -0204 -0303 -0402 Coarseness No 3 2 1 0 Correspond. grit size approx. No 180 220 360 600 No. of sheets per pack. 100 100 100 100 Art. no. 1630 -0501 -0600 -0709 Coarseness No 2/0 3/0 4/0 Correspond. grit size approx. No 800 1000 1200 No. of sheets per pack. 100 100 100 208

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 209 Friday, March 27, 2009 11:08 AM

Grinding tools

Sandpaper (Flint paper)

"Norton" Coated with flint. For hand sanding of wood. Sheet size 230×280 mm. Coarse Correspond. Art. no. Pack. Art. no. ness grit. No approx. No 8348 qty 8348 3/0 180 -4006 100 -5003 2/0 150 -4105 100 -5102 0 120 -4204 100 -5201 1 100 -4303 100 -5300 2 100-80 -4402 100 -5409 3 80 -4501 100 -5508 4 80-60 -4600 100 -5607 5 60 -4709 100 -5706 6 50 -4808 100 -5805

Pack.

-

Files - Grinding tools

Sandpapers(Flint papers)

3

Abrasive cloth rolls Economy rolls Abrasive cloth roll

"Norton" Metalite R222.Coated with aluminium oxide. For sanding iron, steel and other metals by hand. GritWidth 25 mm - 25 m Width 38 mm Width 50 mm size Art. no. Pack. Art. no. Pack. Art. no. Pack. 3207 qty 3207 qty 3207 qty 36 (-0872) 1 (-1672) 1 40 -0047 1 -0880 1 -1680 1 50 -0070 1 -0898 1 -1698 1 60 -0104 1 -0906 1 -1706 1 80 -0203 1 -1003 1 -1805 1 100 -0302 1 -1102 1 -1904 1 120 -0401 1 -1201 1 -2001 1 150 -0500 1 -1300 1 -2100 1 180 -0609 1 -1409 1 -2209 1 220 -0658 1 -1441 1 -2258 1 240 -0708 1 -1508 1 -2308 1 280 -0757 1 -1540 1 -2357 1 320 -0807 1 -1607 1 -2407 1 400 -0856 1 -1656 1 -2506 1 600 -0864 1 -1664 1 -2605 1 GritWidth 38 mm Width 50 mm Width 100 mm - 50 m size Art. no. Pack. Art. no. Pack. Art. no. Pack. 3207 qty 3207 qty 3207 qty 60 -4106 1 -5301 1 -3108 1 80 -4205 1 -5400 1 -3207 1 100 -4304 1 -5509 1 -3306 1 120 -4403 1 -5608 1 -3405 1 150 -4502 1 -5707 1 -3504 1 180 -4601 1 -5806 1 -3603 1 220 -4700 1 -5905 5 240 -4809 1 -6002 5 -3702 1 320 -4908 1 -6101 5 (-3751) 1 400 -5004 1 -6200 5 -3801 1

Abrasive cloth roll

"Norton" R212.Coated with aluminium oxide. For sanding iron, steel and other metals by hand. Width 38 mm, length 25 m. R212 Art. no. 10747 -3001 -3100 -3209 -3308 -3407 -3506 -3605 -3704 -3803 -3902 Grit size 60 80 100 120 150 180 220 240 320 400 Width mm 38 38 38 38 38 38 38 38 38 38 Length m 25 25 25 25 25 25 25 25 25 25 Pack. qty 1 1 1 1 1 1 1 1 1 1 R202 Art. no. 10747 -0205 -0304 -0908 Grit size 80 100 320 Width mm 38 38 38 Length per roll m 25 25 25 Pack. qty 1 1 1 209

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 210 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Hand abrasive cloth rolls Hand abrasive cloth

"Norton" Metalite R222. Coated with aluminium oxide. For sanding iron, steel and other metals by hand. Suitable abrasive sheet for surface grinders (hand) see Art. no. 3206 -0105 -0204 -0303 -0402 Grit size 60 100 150 240 Width mm 25 25 25 25 Length per roll m 10 10 10 10 Pack. qty 1 1 1 1

Abrasive paper rolls For hand sanding and surface grinders Sandpaper rolls

"Norton" G131 Dry sanding paper. Coated with aluminium oxide. For wood, filled, painted or vanished surfaces. Grit- Width x length 93mm x 50m Width x length 100mm x 50m Width x length 115mm x 50m size Art. no. Pack. Art. no. Pack. Art. no. Pack. ness 15033 qty 15033 qty 15033 qty 40 -0405 2 -1007 2 -1908 2 60 -0504 2 -1106 2 -2005 2 80 -0603 2 -1205 2 -2104 2 100 -0702 2 -1304 2 -2203 2 120 -0801 2 -1403 2 -2302 2 150 -0900 2 -1502 2 -2401 2

Sandpaper rolls

"Norton" Adalox G121 Dry sanding paper. Coated with aluminium oxide. Phenolic resin bound. For wood, filled, painted or enamelled surfaces. Grit size Width 93 mm Width 100 mm Width 115 mm Length 50 m Length 50 m Length 50 m Art. no. Pack. Art. no. Pack. Art. no. Pack. Dry sanding paper G121 8769 8769 8769 40 -0103 2 -5003 2 -0806 2 60 -0202 2 -5201 2 -0905 2 80 -0251 2 -5300 2 -0954 2 100 -0301 2 -5409 2 -1002 2 120 -0350 2 -5508 2 -1051 2 150 -0400 2 -5607 2 -1101 2 Stearate treated. MAX A295 180 -4303 2 -7405 2 220 -7504 2 240 -4501 2 280 -7603 2 -

Sandpaper rolls

"Norton" Norton Pro. Coated with filler agent that effectively counteracts clogging. Strong and versatile quality with fibre reinforced latex back for fine and medium sanding of paint, filler, primer, epoxy, plastic and metal and hard types of wood (both wet and dry grinding). Extremely high resistance to tearing which gives exceptionally long service life. Both the filler agent and bonding agent are completely transparent which eliminates unwanted colouring of the work piece. GritWidth x length 100 mm x 50 m Art. no. Pack size 13938 qty 80 -0109 2 100 (-0208) 2 120 -0307 2 150 (-0356) 2 180 -0406 2 220 (-0505) 2 240 -0604 2 280 (-0703) 2 320 -0802 2 400 (-0901) 2

210

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 211 Friday, March 27, 2009 11:08 AM

Grinding tools

Sandpaper rolls for hand sanding

"Norton" Rotolo Foam. Norton Pro. Strong and good quality with fibre reinforced latex backing for fine and intermediate sanding of paint, varnish, filler, primer, epoxy, plastic and metal and hardwoods (both wet and dry sanding). Coated with filler that effectively counteracts clogging. Norton Pro has very large resistance to ripping, giving exceptionally long life. The filler and bonding agent are completely colourless, which eliminates unwanted colouring of the work piece. Has a 4 mm extra layer of foam between the abrasive paper and grpi surface. The foam make the product grip and user friendly. This gives softer sanding and finer surfaces than traditional sheets and minimises the risk of sanding through. Especially suitable for fine sanding of enamelled surfaces. Perforated which gives approx. 180 sheets at approx 140 mm. All rolls are 25 metres long and supplied in a practical and dust free storage box. Art. no. 13908 (-0055) -0105 -0204 Width mm 115 115 115 Grit size 120 150 180 Pack. qty 2 2 2 Art. no. 13908 (-0303) -0402 (-0501) Width mm 115 115 115 Grit size 220 240 280 Pack. qty 2 2 2 Art. no. 13908 -0600 (-0709) -0808 Width mm 115 115 115 Grit size 320 360 400 Pack. qty 2 2 2 Art. no. 13908 -0907 -1004 -1103 Width mm 115 115 115 Grit size 500 600 800 Pack. qty 2 2 2 Art. no. 13908 (-1202) (-1301) Width mm 115 115 Grit size 1000 1500 Pack. qty 2 2

Files - Grinding tools

For hand sanding

3

Abrasive mesh rolls Abrasive mesh roll

"Norton" Q421 Screen-Rear Durite. For hand sanding of iron, steel, stainless steel, aluminium, paint, filler , etc. Especially suitable for material that has a tendency to clog. Flexible. For wet and dry sanding. Abrasive: Silicon carbide. Art. no. 1982 -0109 -0208 -0307 Grit size 60 80 100 Width mm 38 38 38 Length per roll m 25 25 25 Pack. qty 1 1 1 Art. no. 1982 -0406 -0505 -0703 Grit size 120 180 320 Width mm 38 38 38 Length per roll m 25 25 25 Pack. qty 1 1 1

Holder for abrasive rolls Holder for abrasive rolls

For economy rolls. Wall bracket for economy rolls. With tear-off guide and label holder. Art. no. 3209 -0102 For roll widths max. mm 50 Pack. qty 1

211

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 212 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

212

Grinding tools

Abrasive belts For metal sanding Abrasive belts for metal sanding

"Norton" Abrasive cloth belt SG. RX22. With abrasive coating of Seeded Gel (SG). For fee-belt sanding or sanding against a contact wheel with extra large demands on removal rate and life. Grit 36-60. For burrs and edges on iron, stainless steel, natural steel, brass, aluminium, etc. and for fettling metal castings. Grit 80. As the preceding but with less stock removal and smoother surface. Grit 120. For tool care and other smooth sanding. DimenGrit 36 Grit 40 Grit 50 sions Art. no. Pack. Art. no. Pack. Art. no. Pack. mm 3221 qty 3221 qty 3221 qty 10×330 -0205 20 16×480 -0502 20 20×480 -0700 20 20×520 -0908 20 25×762 -0361 20 30×540 -1302 20 50×394 -1906 20 50×618 -2706 20 -2805 20 50×1275 -3506 20 -3605 20 50×1600 -4108 20 -4207 20 -4306 20 50×2000 -4702 20 -4801 20 -4900 20 75×1000 -5824 10 75×2000 -5907 10 -6004 10 -6103 10 75×2250 -6608 10 -6707 10 -6806 10 75×2500 -7101 10 -7200 10 -7309 10 100×1000 -7705 10 100×1500 -8059 10 100×2000 -8208 10 -8307 10 150×2000 -8703 10 -8802 10 -8901 10 150×2500 -9206 10 -9305 10 DimenGrit 60 Grit 80 Grit 120 sions Art. no. Pack. Art. no. Pack. Art. no. Pack. mm 3221 qty 3221 qty 3221 qty 6×330 -0106 20 10×330 -0304 20 -0403 20 13×305 -0221 20 -0247 20 -0262 20 13×610 -0288 20 -0320 20 -0346 20 16×480 -0601 20 20×480 -0809 20 20×520 -1005 20 -1104 20 25×762 -0387 20 -0395 20 25×1000 -1203 20 30×540 -1401 20 -1500 20 40×2225 -1708 20 -1807 20 50×394 -2102 20 -2201 20 -2300 20 50×473 -2409 20 -2508 20 -2607 20 50×618 -2904 20 -3001 20 -3100 20 50×800 -3209 20 -3308 20 -3407 20 50×1275 -3704 20 50×1500 -3803 20 -3902 20 -4009 20 50×1600 -4405 20 -4504 20 -4603 20 50×2000 -5006 20 -5105 20 -5303 20 63×1000 -5402 10 -5501 10 -5600 10 65×1500 -5709 10 -5808 10 75×1000 -5840 10 -5865 10 -5881 10 75×2000 -6202 10 -6301 10 -6509 10 75×2250 -6905 10 -7002 10 75×2500 -7408 10 -7507 10 -7606 10 100×1000 -7804 10 -7903 10 -8000 10 100×1500 -8109 10 -8158 10 100×1670 -8182 20 100×2000 -8406 10 -8505 10 -8604 10 150×2000 -9008 10 -9107 10 150×2500 -9404 10 -9503 10 -9602 10

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 213 Friday, March 27, 2009 11:08 AM

Grinding tools "Norton" Abrasive cloth belt SG. R929. Abrasive coating of the latest SG generation with heavy-duty polyester backing for grinding. For fee-belt sanding or sanding against a contact wheel with extra large demands on removal rate and life. High content of active filling material makes the belt extremely cold cutting. Grit 36-60. For burrs and edges on iron, stainless steel, natural steel, brass, aluminium, etc. and for fettling metal castings. Grit 80. As the preceding but with less stock removal and smoother surface. Grit 120. For tool care and other smooth sanding. DimenGrit 36 Grit 40 Grit 50 sions Art. no. Pack. Art. no. Pack. Art. no. Pack. mm 14476 qty 14476 qty 14476 qty 10x330 -0204 50 13x457 -0808 50 16x480 -1509 50 20x480 -1707 50 20x520 -2101 50 25x762 -2408 50 30x540 -2804 20 50x394 -3307 20 50x618 -4008 20 -4107 20 50x1275 -4800 10 -4909 10 50x1600 -5401 10 -5500 10 -5609 10 50x2000 -6003 10 -6102 10 -6201 10 75x1000 -7001 10 75x2000 -7407 10 -7506 10 -7605 10 75x2250 -8058 10 -8108 10 -8157 10 75x2500 -8306 10 -8355 10 -8405 10 100x1000 -8603 10 (-8637) 10 100x1500 -8801 10 100x2000 -8959 10 -9007 10 150x2000 -9205 10 -9254 10 -9304 10 150x2500 -9452 10 -9502 10 DimenGrit 60 Grit 80 Grit 120 sions Art. no. Pack. Art. no. Pack. Art. no. Pack. mm 14476 qty 14476 qty 14476 qty 6x330 -0105 50 10x330 -0303 50 -0402 50 13x305 -0501 50 -0600 50 -0709 50 13x457 -0907 50 -1004 50 -1103 50 13x610 -1202 50 -1301 50 -1400 50 16x480 -1608 50 20x480 -1806 50 -1905 50 -2002 50 20x520 -2200 50 -2309 50 25x762 -2507 50 -2606 50 25x1000 -2705 50 30x540 -2903 20 -3000 20 40x2225 -3109 10 -3208 10 50x394 -3406 20 -3505 20 -3604 20 50x473 -3703 20 -3802 20 -3901 20 50x618 -4206 20 -4305 20 -4404 20 50x800 -4503 20 -4602 20 -4701 20 50x1275 -5005 10 50x1500 -5104 10 -5203 10 -5302 10 50x1600 -5708 10 -5807 10 -5906 10 50x2000 -6300 10 -6409 10 -6508 10 63x1000 -6607 10 -6706 10 -6805 10 65x1500 -6904 10 75x1000 -7100 10 -7209 10 -7308 10 75x2000 -7704 10 -7803 10 -8009 10 75x2250 -8207 10 -8256 10 75x2500 -8454 10 -8504 10 -8553 10 100x1000 -8652 10 -8702 10 -8751 10 100x1500 -8850 10 -8900 10 100x2000 -9056 10 -9106 10 -9155 10 150x2000 -9353 10 -9403 10 150x2500 -9551 10 -9601 10 -9650 10

Files - Grinding tools

Abrasive cloth belt

3

213

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 214 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Abrasive belts for metal sanding

"Norton" Abrasive cloth belt SG. RX22. With abrasive coating of Seeded Gel (SG). For fee-belt sanding or sanding against a contact wheel with extra large demands on removal rate and life. Grit 40-60. For burrs and edges on iron, stainless steel, natural steel, brass, aluminium, etc. and for fettling metal castings. Grit 80. As the preceding but with less stock removal and smoother surface. Grit 120. For tool care and other smooth sanding. Dimen- Quantity Grit 40 Grit 60 Grit 80 Grit 120 sions belt Art. no. Quantity Art. no. Quantity Art. no. Quantity Art. no. Quantity per 2-pack 2-pack 2-pack 2-pack mm pack. 3220 per card. 3220 per card. 3220 per card. 3220 per card. 50×800 2 -0107 1 -0206 1 -0305 1 50×1500 2 -0404 1 -0503 1 -0552 1 50×1600 2 -0602 1 -0701 1 -0800 1 -0909 1 50×2000 2 -1006 1 -1105 1 -1204 1 -1303 1 75×1000 2 -1402 1 -1501 1 -1600 1 75×2000 2 -1709 1 -1808 1 -1907 1 -2004 1 75×2500 2 -2400 1 -2509 1 -2608 1 100×1000 2 -2707 1 -2806 1 -2905 1

Abrasive belts for metal sanding

"Norton" Abrasive cloth belt R822. For free belt grinding or grinding against a contact wheel. Abrasive coating with Norzon abrasive, which gives a good all-round quality for grinding iron, steel and stainless steel with god removal and life. DimenGrit 24 Grit 36 Grit 40 Grit 50 sions Art. no. Pack. Art. no. Pack. Art. no. Pack. Art. no. Pack. mm 11729 qty 11729 qty 11729 qty 11729 qty 15x330 -2508 50 50x2000 -2904 10 -3001 10 -3100 10 75x2000 -0106 10 -0155 10 -0205 10 75x2250 -0700 20 -0908 20 75x2500 -1203 20 -0304 10 -0353 10 -0403 10 150x2000 -1302 10 -1401 10 -1500 10 DimenGrit 60 Grit 80 Grit 120 sions Art. no. Pack. Art. no. Pack. Art. no. Pack. mm 11729 qty 11729 qty 11729 qty 13x457 -2102 50 -2201 50 -2300 50 15x330 -2607 50 -2706 50 -2805 50 50x2000 -3209 10 -3308 10 (-3357) 10 75x2000 -0254 10 -0262 10 -0288 10 75x2250 -1005 20 -1104 20 75x2500 -0502 10 -0601 10 (-0650) 10 150x2000 -1609 10 -1708 10 150x2500 -1906 10 -2003 10 -

Abrasive cloth belt

"Norton" Abrasive cloth belt SG. R929. Abrasive coating of the latest SG generation with strong polyester backing for exacting grinding. For fee-belt sanding or sanding against a contact wheel with extra large demands on removal rate and life. High content of active filling material makes the belt extremely cold cutting. Grit 40-60. For burrs and edges on iron, stainless steel, natural steel, brass, aluminium, etc. and for fettling metal castings. Grit 80. As the preceding but with less stock removal and smoother surface. Grit 120. For tool care and other smooth sanding. DimenNo. of 2-PACK 2-PACK sions tie Grit 40 Grit 60 per Art. no. Pack. Art. no. Pack. mm pack. 14475 qty 14475 qty 50x800 2 -0106 1 50x1500 2 -0403 1 50x1600 2 -0700 1 -0809 1 50x2000 2 -1104 1 -1203 1 75x2000 2 -1500 1 -1609 1 75x2500 2 -1906 1 -2003 1 100x1000 2 -2201 1 50x800 2 -0205 1 -0304 1 50x1500 2 -0502 1 -0601 1 50x1600 2 -0908 1 -1005 1 50x2000 2 -1302 1 -1401 1 75x2000 2 -1708 1 -1807 1 75x2500 2 -2102 1 100x1000 2 -2300 1 -

214

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 215 Friday, March 27, 2009 11:08 AM

Grinding tools "Norton" Abrasive cloth belt Metalite R265. For free belt grinding or grinding against a contact wheel. Abrasive coating aluminium oxide. DimenQuantity Grit 180 Grit 240 Grit 320 sions belt Art. no. Quantity Art. no. Quantity Art. no. Quantity mm per pack. 2699 qty 2699 qty 2699 qty 50×800 2 -0705 1 -0804 1 50×1600 2 -2206 1 -2305 1 -2404 1 50×2000 2 -3006 1 -3105 1 -3204 1

For wood and metal sanding Abrasive belts for wood and metal sanding

"Norton" Abrasive cloth belt Metalite R230. Grit size 36 (extra coarse). Removal of old paint, varnish, etc. from the floor, boats and the like. Grit size 50 (coarse). Coarse sanding of sawn timber, plate, metal, etc. with open surfaces. In stationary applications also for deburring, etc. Grit size 80 (medium). Sanding of planed timber. Otherwise as above. The quality gives a lower effect but a better surface. Grit size 120 (fine). Fine sanding of wood, sheet, etc. In stationary applications also tool care and other lighter sanding. DimenGrit size 36 Grit size 50 sions Art. no. Pack. Art. no. Pack. mm 8339 qty 8339 qty 75×533 -3405 20 -3454 20 100×552 -3652 20 100×560 -0310 20 -0336 20 100×610 -3850 20 100×620 -4056 20 DimenGrit size 60 Grit size 80 Grit size 120 sions Art. no. Pack. Art. no. Pack. Art. no. Pack. mm 8339 qty 8339 qty 8339 qty 75×480 -4403 20 -4452 20 75×533 -3504 20 -3553 20 100×552 -3678 20 -3702 20 -3751 20 100×560 -0351 20 -0377 20 100×610 -3900 20 100×620 -4106 20 -4155 20

Files - Grinding tools

Abrasive belts for metal sanding

3

For wood sanding Abrasive belts for wood sanding

"Norton" Abrasive cloth belt Metalite R230. Grit 50. For coarse processing of rough sawn timber. Grit 80. Sanding of planed timber. Grit 120. Finishing of wood. DimenGrit 50 Grit 80 sions Art. no. Pack. Art. no. Pack. mm 8339 qty 8339 qty 25×762 -2902 2 -2936 2 40×825 -0047 2 -0054 2 63×1000 -0203 2 100×900 -4809 2 -4908 2 100×915 -0385 2 -0435 2 100×1000 -0450 2 -0500 2 100×1500 -0971 1 -0989 1 100×1610 -1052 2 -1102 2 100×1670 -1359 2 -1409 2 150×1480 -1706 2 150×2500 -2001 2 150×3500 -2308 1

Grit 120 Art. no. Pack. 8339 qty -2951 2 -0062 2 -0252 2 -5004 2 -0484 2 -0559 2 -0997 1 -1151 2 -1458 2 -1755 2 -2050 2 -2357 1

215

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 216 Friday, March 27, 2009 11:08 AM

Grinding tools Abrasive belts for sanding wood

Files - Grinding tools

3

Abrasive paper belts. Grit 50-60. For coarse sanding of sawn timber. Grit 80-100. For sanding planed timber. Grit 120. For finishing wood. DimenNumber Grit 50 sions of belts Art. no. Pack. per mm pack. f 100×1500 2 9211-0402 1 100×2000 2 9211-2200 1 120×4900 2 9211-2507 1 150×1220 3 4496-0300 1 150×1860 2 8286-1105 1 150×2000 2 10294-1002 1 150×2170 2 150×2250 2 9211-3109 1 150×2515 2 12650-1006 1 150×2700 2 150×3500 2 9211-0709 1 150×4150 2 9211-0105 1 DimenNumber Grit 100 sions of belts Art. no. Pack. per mm pack. 9180 100×1500 22 100×2000 22 120×4900 22 150×1220 3 150×1860 22 150×2000 22 150×2170 22 -1308 1 150×2250 22 150×2515 22 150×2700 22 150×3500 22 150×4150 22 -

Grit 80 Art. no.

Pack. f

9211-0501 9211-2309 9211-2606 4496-0409 8286-1303 10294-1101 9180-1506 9211-3208 12650-1105 9211-1103 9211-0808 9211-0204

1 1 1 1 1 1 1 1 1 1 1 1 Grit 120

Art. no.

Pack. f

9211-0600 9211-2408 9211-2705 4496-0508 8286-1501 10294-1200 9211-3307 12650-1204 9211-1202 9211-0907 9211-0303

1 1 1 1 1 1 1 1 1 1 1

Abrasive paste Tallow wax Tallow wax

Used when grinding soft metals e.g. aluminium. Lubricates the abrasive belt and keeps the abrasive belt clean from metal coating and counteracts a rough surface. Also used on bandsaws. Art. no. 3505 -0103 Name Tallow wax-G Weight per pack approx. kg 0.7 Quantity f 15

Contact wheels For belt sanders Contact wheel for belt sanders

Precision manufactured and counterbalanced. With aluminium hub and fluted rim of strong rubber polyethylene in a normal hard quality for general varying belt sanding. Supplied with ball bearings - hole diameter 20 mm. Softer or harder wheels available on request. Art. no 6920 -0350 Diameter mm 200 Width mm 75 Hole diam. mm 42 Pack qty 1

216

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 217 Friday, March 27, 2009 11:08 AM

Grinding tools

Discs Abrasive nylon disc

"Norton" Bear-Tex. Rapid Strip. Discs for all types of coarse cleaning, oxide removal, preparations before welding, etc. Coarseness: Extra coarse. Recommended working speed 25-30 m/s. Max. speed 46 m/s. Rapid Strip with spindle. Discs as above but with a fitted spindle. High Strength. Discs for light deburring, rounding, oxide removal, polishing and cleaning. Gives decorative finishing. Coarseness: Medium and Very fine. Recommended working speed 20-25 m/s. Max. speed 32 m/s. Discs 4603 -0805 -0854 -0904 -0938 -0953 Diam.xhickness.xhole mm 100x12x12 125x12x12 150x12x12 150x12x22 200x12x12 Max. speed r/min 8500 6500 5700 5700 4300 Rec. speed r/min 4500-5500 3600-4300 3100-3700 3100-3700 2400-2900 Pack. qty 25 25 15 15 15 Loose spindle 4603 -1001 -1100 -1100 -1100 -1100 Diameter mm 6 8 8 8 8 Flange diameter mm 30 40 40 40 40 Pack. qty 6 8 8 8 8 Discs 4603 -0409 -0508 -0607 Diam.xhickness.xhole mm 150x12x12 150x12x12 200x12x12 Coarseness medium very fine medium Max. speed r/min 4000 4000 3000 Rec. speed r/min 2500-3200 3500-3200 1900-2400 Pack. qty 70 70 50 Loose spindles 4603 -1100 -1100 -1100 Diameter mm 8 8 8 Flange diameter mm 40 40 40 Pack. 8 8 8 Art. no. 4603 -1308 -1407 -1506 -1605 Diam.xthick.xspindle diam. mm 100x13x6 100x25x6 150x13x8 150x25x8 Max. speed r/min 8500 8500 5700 5700 Rec. speed r/min 4500-5500 4500-5500 3100-3700 3100-3700 Pack. qty 10 10 6 6 Art. no. 4603 -2009 -2108 Diam.xhole mm 115x22 125x22 Model RSF RSF Max. speed r/min 13500 12500 Rec. speed r/min 11000 10000 Pack. qty 10 10

Files - Grinding tools

Abrasive nylon

3

Abrasive nylon disc

"3M Scotch-Brite" Type Blue.Coarse cleaning discs. For cleaning weld joints and metal surfaces as well as the removal of rust, paint, oxides, etc. Discs 11833 -0208 -0307 -0406 3M-no CG-DC74992 61122 74692 Diam. x thickness x hole mm 127x13 150x13 178x13 Suitable spindle 3M-no 9006 9008 9008 Max. speed rpm 5000 4000 3300 Quantity ea. 1 2 1 Pack. 24 10 20 Spindles 4146 -0700 -0809 3M-no 9006 9008 Shaft daim. mm 6 8 Pack. qty 5 5

Abrasive nylon disc

"Norton" Bear-Tex. Rapid Strip (black). Discs for all kinds coarse cleaning, oxide removal, weld prepping, etc. Coarseness: Extra coarse. Recommended working speed 25-30 m/s. Max. speed 46 m/s. Discs 4603 -0839 -0854 -0946 -0938 -0979 Diam.x thickness x hole mm 100x12x13 125x12x13 150x12x13 150x12x22 200x12x13 Max. speed rpm 8500 6500 5700 5700 4300 Rec. speed rpm 4500-5500 3600-4300 3100-3700 3100-3700 2400-2900 Pack. qty 25 25 15 15 5 Loose spindle 4603 -1001 -1100 -1100 -1100 -1100 Diameter mm 6 8 8 8 8 Flange diameter mm 30 40 40 40 40 Pack. qty 6 8 8 8 8

217

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 218 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Abrasive nylon disc med spindle

"Norton" Bear-Tex. Rapid Strip (black). Discs with mounted spindle for all kinds coarse cleaning, oxide removal, weld prepping, etc. Coarseness: Extra coarse. Recommended working speed 25-30 m/s. Max. speed 46 m/s.

Art. no. Diameter x thickness x spindle diam. Max. speed Rec. speed Pack.

13886 mm

-0101 75x13x6

-0200 75x25x6

-0309 100x13x6

-0408 100x25x6

-0507 150x13x6

-0606 150x25x6

rpm rpm qty

10800 6000-7200 10

10800 6000-7200 5

8500 4500-5500 10

8500 4500-5500 5

5700 3100-3700 10

5700 3100-3700 5

Abrasive nylon disc

"Norton" Bear-Tex. Rapid Strip. For all types of coarse cleaning, oxide removal, preparations before welding, etc. on iron, steel and stainless steel, etc. With Velcro attachment. Used together with a special support pad type Special Norgrip. Art. no. 13887 -0100 -0209 -0308 -0407 (-0506) Diameter mm 115 125 150 178 203 Specification Extra Coarse Extra Coarse Extra Coarse Extra Coarse Extra Coarse Max. speed rpm 12000 10000 8000 6000 4000 Pack. qty 10 10 10 5 5 Base plates 4540 -2005 (-2054) -2104 Diameter mm 115 115 125 Thread M 14 UNC 5/8 M 14 Pack. qty 1 1 1 Base plates 4540 (-2112) (-2138) -2153 Diameter mm 125 125 150 Thread UNC 5/8 UNC 5/16 M 14 Pack. qty 1 1 1 Base plates 4540 (-2179) (-2195) (-2203) Diameter mm 150 150 175 Thread UNC 5/8 UNC 5/16 M 14 Pack. qty 1 1 1 Base plates 4540 -2302 (-2351) (-2401) Diameter mm 175 180 200 Thread UNC 5/8 UNC 5/8 M 14 Pack. qty 1 1 1 Base plates 4540 (-2450) Diameter mm 200 Thread UNC 5/8 Pack. qty 1

Abrasive nylon disc

"Norton" Bear-Tex. Rapid Strip. For all types of coarse cleaning, oxide removal, weld prepping, etc. on iron, steel and stainless steel etc. Mounted on a fibre back for direct mounting on an angle grinder. Art. no. 13888 -0109 -0208 -0307 Diameter x hole mm 115x22 125x22 178x22 Specification Extra coarse Extra coarse Extra coarse Max. speed rpm 10000 8500 6500 Pack. qty 5 5 5

Abrasive nylon disc

"3M Scotch-Brite" Coarse cleaning disc for cleaning weld joints and the removal of rust, paint, oxides, etc. Foam reinforced for improved removal rate and long life. Art. no. 4149 -0103 -0202 -0301 3M HPCSD No H1ZS-03717 H1ZS-03729 H1DC-09830 Diam.×thickness×hole mm 100×12 150×12 150×12×12 Stub axle mm 6 8 Suitable spindle 3M-no 9008 Max. speed r/min 8000 6000 4000 Pack. qty 10 6 20

Coarse cleaning disc

"3M Scotch-Brite" Type Blue. Coarse cleaning disc for cleaning weld joints and the removal of rust, paint, oxides, etc. Stub axle 6/8 mm. Art. no. 11832 -0100 -0209 -0308 -0407 -0506 3M CG-ZS 61164 61165 61166 61168 61169 Diam.×thickness. mm 75x13 100x13 150x13 100x25 150x25 Stub axle mm 6 6 8 6 8 Max. speed rpm 8500 8000 6000 8000 6000 Pack. qty 10 10 6 10 6 218

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 219 Friday, March 27, 2009 11:08 AM

Grinding tools

Files - Grinding tools

Coarse cleaning disc

3

"3M Scotch-Brite" Type Purple. Coarse cleaning disc for cleaning weld joints and the removal of rust, paint, oxides, etc. Stub axle 6/8 mm. Art. no. 10719 -0100 -0209 -0308 3M XT-ZS 05808 05809 05810 Diam.×thickness. mm 75x12 100x12 150x12 Stub axle mm 6 6 8 Max. speed r/min 8500 8000 6000 Pack. qty 10 10 6

Coarse cleaning disc

"3M Scotch-Brite" Type Blue. Coarse cleaning disc for cleaning weld joints and the removal of rust, paint, oxides, etc. For angle grinder. Art. no. 11831 -0200 3M No CG-RB-61174 Diameter mm 115 Design Fitted to thethe back-up padwith 22 mm hole Max. speed rpm 12000 Pack. qty 10

Coarse cleaning disc

"3M Scotch-Brite" Type Purple. Coarse cleaning disc for cleaning weld joints and the removal of rust, paint, oxides, etc. With integrated back-up pad for an angle grinder. Art. no. 10720 -0107 3M-no XT-DR05818 Diameter x hole mm 115x22 Pack. qty 10

Surface conditioning discs Surface conditioning discs

"Norton" TR. Type Roloc. Bear-Tex. AG. Surface conditioning disc for deburring, delustering, cleaning and rust removal. Highly effective disc with extra long life. Cuts aggressively under a high working pressure and is ideal for heavy deburring and finishing primarily on stainless steel. SCM. Surface conditioning disc for deburring, delustering, cleaning and rust removal. Give a smooth surface and has a long life. Grit Diameter 38 mm Diameter 50 mm Diameter 75 mm Rec. working speed Rec. working speed Rec. working speed 9500-12000 r/min 7500-9500 r/min 4400-5800 r/min Art. no. Pack. Art. no. Pack. Art. no. Pack. 13195 qty 13195 qty 13195 qty AG - Extra coarse -1055 25 -1352 25 SCM - Coarse -1204 25 -1501 25 -1808 25 SCM - Medium -1105 25 -1402 25 -1709 25 SCM - Very fine -1006 25 -1303 25 -1600 25 SCM - Super fine -1329 25 -1659 50 Holder 13202 -0801 -0900 -1007 -1106 -1205 For disc diameter mm 38 50 50 75 75 Spindle diameter mm 6.0 6.0 6.0 6.0 M 14 thread Type Medium Medium Hard Medium Medium plastic Max. speed rpm 30000 30000 30000 20000 11200 Pack. qty 1 1 1 1 1

-1304 75 M 14 thread Medium rubber 20000 1

Surface conditioning discs

"Norton" TS. Type Roloc. Bear-Tex. AG. Surface conditioning disc for deburring, delustering, cleaning and rust removal. Highly effective disc with extra long life. Cuts aggressively under a high working pressure and is ideal for heavy deburring and finishing primarily on stainless steel. SCM. Surface conditioning disc for deburring, delustering, cleaning and rust removal. Give a smooth surface and has a long life. Holder 13202 -0207 -0306 -0405 -0504 -0603 For disc diameter mm 38 50 50 75 75 Spindle diameter mm 6.0 6.0 6.0 6.0 6.0 Type Medium Medium Hard Medium Hard Max. speed rpm 30000 30000 30000 20000 11200 Pack. qty 1 1 1 1 1

219

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 220 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Grit

AG - Extra coarse SCM - Coarse SCM - Medium SCM - Very fine SCM - Super fine

Diameter 38 mm Rec. working speed 9500-12000 r/min Art. no. Pack. 13195 qty -0305 25 -0206 25 -0107 25 -

Diameter 50 mm Rec. working speed 7500-9500 r/min Art. no. Pack. 13195 qty -0156 25 -0602 25 -0503 25 -0404 25 -0420 25

Diameter 75 mm Rec. working speed 4400-5800 r/min Art. no. Pack. 13195 qty -0453 25 -0909 25 -0800 25 -0701 25 -0751 50

Surface conditioning discs

"Norton" TS. BUF. Polishing disc covered with Lantuck for greater durability. Follows forms and contours on account of the flexible backing. Gives a smooth surface. Coarseness Diameter 50 mm Diameter 75 mm Rec. working speed Rec. working speed 7500-9500 r/min 4400-5800 r/min Art. no. Pack. Art. no. Pack. 13197 qty 13197 qty Coarse -0402 25 -0808 25 Medium -0303 25 -0709 25 Fine -0204 25 -0600 25 Very fine -0105 25 -0501 25 Holder 13202 -0306 -0405 -0504 -0603 For disc diameter mm 50 50 75 75 Spindle diameter mm 6.0 6.0 6.0 6.0 Type Medium Hard Medium Hard Max. speed rpm 30000 30000 20000 11200 Pack. qty 1 1 1 1

Surface conditioning discs

"Norton" Bear-Tex. For cleaning, paint and varnish removal and the removal of grinding marks on iron, steel and stainless steel, etc. The discs combine aggressiveness, long life and good surface finish. Used together with a special support pad type Special Norgrip. Highest permitted working speed is 63 m/s. Recommended working speed 30-35 m/s. Coarseness Orig. no Diameter 115 Diameter 125 mm Diameter 150 mm Diameter 178 mm mm Art. no. Pack. Art. no. Pack. Art. no. Pack. Art. no. Pack . 13883 qty 13883 qty 13883 qty 13883 qty Extra Coarse S2106 -0104 20 -0609 20 -1102 10 -1607 10 Coarse S2204 -0203 20 -0708 20 -1201 10 -1706 10 Medium S2300 -0302 20 -0807 20 -1300 10 -1805 10 Very Fine S2505 -0401 20 -0906 20 -1409 10 -1904 10 Super Fine S4704 -0500 20 -1003 20 -1508 10 -2001 10 Base plates 4540 -2005 -2104 -2153 (-2203) -2302 Diameter mm 115 125 150 175 175 Thread M 14 M 14 M 14 M 14 UNC 5/8 Pack. qty 1 1 1 1 1

Surface conditioning discs

"Norton" Bear-Tex. Very aggressive disc with fibre back for exacting work such as deburring on iron, steel and stainless steel etc. Used together with the same type of support pad as for fibre discs. Highest permitted working speed is 80 m/s. Recommended working speed 30-35 m/s. Art. no. 13885 -0102 -0201 -0300 -0409 Type S2204 S2204 S2204 S2204 Dimensions mm 115x22 125x22 150x22 178x22 Specification Coarse FB Coarse FB Coarse FB Coarse FB Pack. qty 20 20 10 10

Surface conditioning discs

"Norton" Bear-Tex. High Strength. The combination of resistance, aggression and durability give these discs very good performance. For use with horizontal, loose spindles (one disc or several stacked). For deburring, cleaning, producing decorative surfaces, etc. Especially suitable for deburring sharp edges. Does not smear and quickly gives a smooth surface finish. Used together with a loose spindle. Discs 13891 -0104 -0203 -0302 (-0401) Diam.xhole mm 150x12 150x12 200x12 200x12 Specification Medium Very Fine Medium Very Fine Pack. qty 70 70 50 50 Loose spindle 4603 -1100 -1100 -1100 -1100 Diameter mm 8 8 8 8 Flange diameter mm 40 40 40 40 Pack. qty 8 8 8 8 220

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 221 Friday, March 27, 2009 11:08 AM

Grinding tools "3M Scotch-Brite" Surface conditioning discs for polishing and finishing on stainless steel and other metals. Final finish after using sanding discs. With Velcro back. For angle grinders. Art. no. 4139 -0105 -0204 -0303 -0402 -0501 3M No SCDH-07924 SCDH-07923 SCDH-07922 SCDH-07921 SEDH-18079 Diameter mm 115 115 115 115 115 Coarseness Super fine Very fine Medium Coarse Extra coarse Colour Grey Blue Red Brown Brown/Blue Max. speed r/min 13000 13000 13000 13000 13000 Pack. qty 20 20 20 20 20 Art. no. 4139 -0600 -0709 -0808 -0907 -1004 3M No SCDH-00648 SCDH-03756 SCDH-03758 SCDH-03754 SEDH-17866 Diameter mm 178 178 178 178 178 Coarseness Super fine Very fine Medium Coarse Extra coarse Colour Grey Blue Red Brown Brown/Blue Max. speed r/min 6000 6000 6000 6000 6000 Pack. qty 10 10 10 10 10 Art. no. 4139 -1103 -1301 3M No 915-05681 917-50018 Diameter mm 115 178 Thread M 14 M 14 Pack. qty 1 1

Files - Grinding tools

Surface conditioning discs

3

Flap wheels Flap wheel

Abrasive nylon, radially attached in Bakelite hub. With aluminium oxide. For satin sanding and dull polishing on flat and contoured surfaces. Suitable as the final stage when restoring surfaces on steel, stainless steel, aluminium, copper, brass, tin, etc. Max peripheral speed 30 m/s. Suitable working speed 5-25 m/s Diameter× ShankMax. Medium Fine Very fine length diam. speed Art. no. Pack. Art. no. Pack. Art. no. Pack. mm mm r/min 9493 qty 9493 qty 9493 qty 40×30 6 14000 -0021 10 -0054 10 -0070 10 50×30 6 11000 -0104 10 -0153 10 -0203 10 60×50 6 9500 -0252 10 -0278 10 -0294 10 80×50 6 7000 -0302 10 -0351 10 -0401 10

Flap wheel

"Norton" Bear-Tex. Abrasive nylon, radially attached in Bakelite hub. For satin sanding and dull polishing on flat and contoured surfaces. Suitable as the final stage when restoring surfaces on steel, stainless steel, aluminium, copper, brass, tin, etc. Max. peripheral speed 30 m/s. Suitable working speed 5-25 m/s. Diameter ShankMax. Rec. A/O Fine SiC Fine A/O Very fine × length diam. speed speed Art. no. Pack. Art. no. Pack. Art. no. Pack. mm mm r/min r/min 9493 qty 9493 qty 9493 qty 60×30 6 9500 1600-8000 -1003 10 -1102 10 -1201 10 80×50 6 7000 1200-6000 -1300 10 -1409 10 -1508 10 100×50 6 6000 950-4700 -1607 10 -1706 10 -1805 10

Flap wheel

"3M Scotch-Brite" For coarse cleaning and polishing work on metal and wood. Stub axle 6 mm. Art. no. 4118 -0100 -0209 -0308 3M-no C5ZS- 07240 07241 07242 Diam.×length mm 50x30 75x30 100x30 Coarseness Medium Medium Medium Colour Brown Brown Brown Max. speed r/min 3400 3400 3400 Pack. qty 25 10 10

Flap wheel

"3M Scotch-Brite" For cleaning and finishing on stainless steel and other metals. Stub axle 6 mm. Art. no. 4119 -0109 -0208 -0307 -0406 3M-no PF-ZS07219 07211 07209 07212 Diam.×length mm 50×25 75×45 75×45 100×45 Coarseness Medium Very fine Medium Very fine Colour Brown Brown Brown Brown Max. speed r/min 12000 8500 8500 6000 Pack. qty 25 10 10 10

-0505 07210 100×45 Medium Brown 6000 10

221

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 222 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Flap wheel

"3M Scotch-Brite" For easy cleaning and producing decorative surfaces on metals. Stub axle 6 mm. Art. no. 4136 -0108 -0207 -0306 3M-no FF-ZS- 07217 07218 07215 Diam.×length mm 75×45 100×45 75×45 Coarseness Very fine Very fine Fine Colour Red Red Grey Max. speed r/min 8500 6000 8500 Pack. qty 10 10 10

Flap wheel - combined Flap wheel - combined

Abrasive nylon and abrasive cloth flaps radially attached in Bakelite hub. Abrasive nylon in 100-grit and abrasive cloth in 80-grit. Gives high removal rate but still a good surface finish. Used among others for surface bettering when processing sheet stainless steel. Art. no. 6939 -0102 -0201 -0300 -0409 Diam.×length mm 40×30 50×30 60×50 80×50 Shaft diameter mm 6 6 6 6 Max. speed r/min 11900 9500 7600 5900 Pack. qty 10 10 10 10

Flap wheel - combined

"Norton" Bear-Tex. Abrasive nylon and abrasive cloth flaps radially attached in Bakelite hub. Gives high removal rate but still a good surface finish. Used among others for surface bettering when processing sheet stainless steel. Diameter× ShankMax. Grit 60 Grit 100 Grit 150 length diam. speed Art. no. Pack. Art. no. Pack. Art. no. Pack. mm mm r/min 6939 qty 6939 qty 6939 qty 60×30 6 9500 -1001 10 -1100 10 -1209 10 80×50 6 7000 -1308 10 -1407 10 -1506 10 100×50 6 6000 -1605 10 -1704 10 -1803 10

Flap wheels Flap wheel

"Norton" Bear-Tex. For polishing uneven surfaces on iron, steel, wood, plastic, etc. Flap wheels give a quick and smooth and consistent surface. Suitable machines with 19.1 mm keyways (Satinex, Flex etc.). Application area: Extra Coarse Coarse cleaning of welds, plates and oxide and rust removal. Coarse Stainless steel and aluminium. Removal of heavy oxide. Medium Stainless steel and aluminium. Gives a matt surface. Fine Stainless steel, wood, paint, varnish. Very Fine Polished finish on all metals, cleaning and oxide removal on soft metals. Art. no. 13892 -0103 -0202 -0301 -0400 -0509 Diam.x thickmm 110x100x19 110x100x19 110x100x19 110x100x19 110x100x19 ness x hole Specification Extra Coarse Coarse Medium Fine Very Fine Pack. qty 6 6 6 6 6

Flap wheel

"Norton" Bear-Tex. For polishing uneven surfaces on iron, steel, stainless steel, wood, plastic, etc. where flap wheels give a quick and smooth and consistent surface. Flap wheels are used together with abrasive cloth which combines the aggressiveness of the abrasive cloth with the fine surface from Bear-Tex. Suitable machines with 19.1 mm keyways (Satinex, Flex etc.). Art. no. 13893 -0102 -0201 Diam.x thickness x hole mm 110x100x19 110x100x19 Specification Coarse + P 80 Medium + P 150 Pack. qty 6 6

Flap wheel

Abrasive nylon, radially attached in Bakelite hub. With aluminium oxide. For satin sanding and dull polishing on flat and contoured surfaces. Suitable as the final stage when restoring surfaces on steel, stainless steel, aluminium, copper, brass, tin, etc. Max. peripheral speed 30 m/s. Suitable working speed 5-25 m/s. Diam× Max. Medium Fine Very fine thickness×hole speed Art. no. Pack. Art. no. Pack. Art. no. Pack. mm r/min 9494 qty 9494 qty 9494 qty 150×30×20 3800 (-0103) 1 (-0152) 1 (-0202) 1 200×50×20 2870 (-0301) 1 (-0350) 1 (-0400) 1

222

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 223 Friday, March 27, 2009 11:08 AM

Grinding tools

Pressed disc

"Norton" Bear-Tex. TR. For deburring, delustering and polishing on iron, steel and stainless steel where compact wheels can not be used due to the high speed. AF = Aluminium oxide fine, AM = Aluminium oxide medium, SK = Silicon carbide fine. SpecifiDiameter 50 mm Diameter 75 mm Art. no. Pack. Art. no. Pack. cation 13894 qty 13894 qty NEX-2SF -0101 10 -0507 10 NEX-4AF -0200 10 -0606 10 NEX-2AM -0309 10 -0705 10 NEX-6AM -0408 10 -0804 10 Holder 13202 -0900 -1007 -1106 -1205 -1304 For disc diameter mm 50 50 75 75 75 Spindle diameter mm 6.0 6.0 6.0 M 14 thread M 14 thread Type Medium Hard Medium Medium plastic Medium rubber Max. speed rpm 30000 30000 20000 11200 20000 Pack. qty 1 1 1 1 1

Files - Grinding tools

Pressed discs

3

Pressed disc

"Norton" Bear-Tex. For deburring, delustering and polishing on iron, steel and stainless steel where compact wheels can not be used due to the high speed. AF = Aluminium oxide fine, AM = Aluminium oxide medium, AC = Aluminium oxide coarse, SF = Silicon carbide fine. Used together with a special holder. Diam.x thicknessxhole Specification Art. no. Pack. mm 13895 qty 50x3x6 NEX-8AM -0100 20 50x3x6 NEX-2AM -0209 20 50x3x6 NEX-4AF -0308 20 50x3x6 NEX-2SF -0407 20 50x3x6 NEX-6AF -0506 20 50x3x6 NEX-8AM -0605 20 50x3x6 NEX-8AC -0704 20 75x3x6 NEX-8AM -0803 20 75x3x6 NEX-2AM -0902 20 75x3x6 NEX-4AF -1009 20 75x3x6 NEX-2SF -1108 10 75x3x6 NEX-6AF -1207 10 75x3x6 NEX-8AM -1306 10 75x3x6 NEX-8AC -1405 10 150x6x13 NEX-2SF -1504 10 150x6x13 NEX-2AM -1603 10 150x6x13 NEX-6AM -1702 10 150x13x13 NEX-2SF -1801 5 150x13x13 NEX-4AF -1900 5 150x13x13 NEX-2AM -2007 5 150x13x13 NEX-8AM -2106 5 150x25x25 NEX-2AM -2205 10 150x25x25 NEX-4AF -2304 10 150x25x25 NEX-2SF -2403 5 200x25x25 NEX-2AM -2502 5 200x25x25 NEX-2SF -2601 5 Holder 13895 -2700 -2809 -2908 For disc width mm max. 6 6-12 12-25 Pack. qty 1 1 1

Pressed discs

"Norton" Bear-Tex. TR. Type Roloc. Manufactured of pressed poly-nylon, a special bonding agent and abrasive to give a high performance polishing product. Recommended for light deburring of edges and threads, delustering of surfaces and polishing. Pressed discs offer high shape stability and do not cut into the work piece. Coarse Diameter 50 mm Diameter 75 mm Rec. working speed 7500-9500 r/min Rec. working speed 4400-5800 r/min Art. no. Pack. Art. no. Pack. ness 13199 qty 13199 qty 2S Fine -0103 10 -0400 10 6A Medium -0301 10 -0608 10 Holder 13202 -0900 -1007 -1106 -1205 -1304 For disc diameter mm 50 50 75 75 75 Spindle diameter mm 6.0 6.0 6.0 M 14 thread M 14 thread Type Medium Hard Medium Medium plastic Medium rubber Max. speed rpm 30000 30000 20000 11200 20000 Pack. qty 1 1 1 1 1 223

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 224 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Compact wheels Compact disc

"Norton" Bear-Tex. Clean & Finish. Compact wheels for cleaning, rust and oxide removal on iron, steel and stainless steel. Gives a decorative surface. Open structure. Not deburring. Recommended working speed 10-15 m/s. Diam. x thickness x hole Coarseness Art. no. Pack. mm 4519 qty 150x25x25.4 M (-0204) 1 150x50x25.4 M (-0600) 1 150x50x25.4 F (-1301) 1 150x100x25.4 M (-1509) 1 200x50x76.2 F (-1806) 1

Compact disc

"Norton" Bear-Tex. Metal Finish. Compact wheels for the removal of sanding marks, basic deburring and delustering on iron, steel and stainless steel, etc. Gives decorative structure. Low working pressure. Recommended working speed 20-25 m/s. Diam. x thickness x hole Coarseness Art. no. Pack. mm 4519 qty 150x25x25.4 M (-3000) 3 150x50x25.4 M (-3109) 1 200x25x76.2 M (-3208) 1 200x50x76.2 M (-3307) 1

Compact wheel (abrasive nylon)

"Norton" Bear-Tex. These wheels are manufactured of Bear-Tex-material which is wound around a hub, it is then bonded and in this way becomes very compact. The wheels are available in numerous hardnesses, which means they cover all working operations from cleaning to extremely tough deburring. Note the direction of rotation stated on the wheel must be observed. D16S Convolute Wheel used for the removal of grinding marks, light deburring on iron, steel, stainless steel, soft metals and wood, etc. Low working pressure. Hardness 6. Recommended working speed 20-25 m/s. D17S Convolute Wheel used for light deburring and removal of grinding marks on iron, steel, stainless steel and wood, etc. Gives a high finish. Low sanding pressure. Hardness 7. Recommended working speed 20-25 m/s. 18S/S18A Convolute Wheel used for polishing and deburring of iron, steel and stainless steel. Dense structure. Withstands high working pressure. Hardness 8. Recommended working speed 25-30 m/s. D19S Convolute Wheel used for polishing and deburring of steel and stainless steel. Very long life. Withstands very high pressure. Hardness 9. Recommended working speed 30-35 m/s. Diamonds Type Coarseness Correspond. Rec. speed Art. no. Pack. thickness.x hole mm grit. rpm 1671 qty 200x25x76.2 D16S F 180-220 1900-2400 (-1103) 1 200x50x76.2 D16S F 180-220 1900-2400 (-1202) 1 150x25x25.4 D17S F 180-220 2600-3200 (-1806) 1 200x25x76.2 D17S F 180-220 1900-2400 -1905 1 200x50x76.2 D17S F 180-220 1900-2400 (-2002) 2 150x13x25.4 D17S M 100-150 2600-3200 -2101 2 150x25x25.4 D17S M 100-150 2600-3200 -2200 1 200x25x76.2 D17S M 100-150 1900-2400 -2309 1 200x50x76.2 D17S M 100-150 1900-2400 (-2408) 1 150x10x25.4 D18S F 180-220 3200-3800 (-2507) 2 150x25x25.4 D18S F 180-220 3200-3800 -2606 1 200x25x76.2 D18S F 180-220 2400-2800 -2705 1 200x50x76.2 D18S F 180-220 2400-2800 -2804 1 Flanges pair 1671 -2853 -2879 Dim. mm 76×25 76×32 Pack. p 1 1

Compact disc

"3M Scotch-Brite" For deburring, polishing and finishing metal as well as dressing wood and MDF-board. Light deburring discs LD-WL Art. no. 4102 -0207 3M No 01679 Diam.xhickness.xhole mm 200x25x76.2 Hardness 8S Coarseness Fine Colour Grey Max. speed r/min 4500 Pack. qty 3 Deburring discs DB-WL Art. no. 4102 -0306 -0405 3M No 18768 18769 Diam.xhickness.xhole mm 150x25x25.4 200x25x76.4 224

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 225 Friday, March 27, 2009 11:08 AM

Grinding tools

r/min qty

Deburring discs DB-WL 7S Fine Grey 6000 3

7S Fine Grey 4500 3

Abrasive nylon sheet Abrasive nylon sheet

"Norton" Bear-Tex. For cleaning, surface finishing, deburring and basic polishing. The flexible design gives a smooth and constant contact with the work surface without scratching or affecting the original shape of the work piece. Can be used wet or dry. Application area: Type 2504 Gives an extreme finish on most materials. Resistant to ripping. Red-brown. Type F4801 Gives the finest finish of the highest quality. Grey. Art. no. 13879 -0100 -0209 Type F2504 F4801 Size mm 230x280 230x280 Coarseness Very fine Ultra fine Pack. qty 35 35

Files - Grinding tools

Hardness Coarseness Colour Max. speed Pack.

3

Abrasive nylon sheet

"Norton" Bear-Tex. For cleaning, surface finishing, deburring and basic polishing. The flexible design gives a smooth and constant contact with the work surface without scratching or affecting the original shape of the work piece. The sheet is slotted/perforated in the middle for easy tearing and gives a sheet size of 152x115 mm. Can be used wet or dry. Application area: Type 2504 Resistant to ripping. Balancing primer, finishing of metal surfaces, smoothing wood. Red-brown. Type F4801 Gives the finest finish of the highest quality. Balancing of clear varnish, finishing metal surfaces, deburring plastics. Grey. Art. no. 13939 -0108 -0207 Type F2504 F4801 Size mm 152x229/2x115 152x229/2x115 Coarseness Very fine Ultra fine Pack. qty 60 60

Abrasive nylon sheet

"Norton" Bear-Tex. For cleaning, surface finishing, deburring and basic polishing. The flexible design gives a smooth and constant contact with the work surface without scratching or affecting the original shape of the work piece. Can be used wet or dry. Application area: Type F0001 Without abrasive. For basic sanding and polishing. White. Type F2302 Most aggressive sheet, resistant, long life. Finishing of stainless steel, removal of welding discolouration. Yellow brown. Type F2300 Strong and open structure, minor clogging, long life. Deburring, removal of rust and surface coatings. Reddish-brown. Type F2401 Open structure, minor clogging, long life. Basic deburring and oxide removal. Gives a fine finish on most materials. Reddish-brown. Type F2504 Gives an extreme finish on most materials. Red. Type F2503 Heavy-duty nylon fibre, good performance, economic. General cleaning of metal and plastic. Green. Type F2801 Flexible design, excellent surface, long life. Balancing of clear varnish on sensitive enamel. Gold yellow. Type F4802 Gives the finest finish of the highest quality. Balancing of clear varnish, finishing metal surfaces, deburring plastics. Grey. Art. no. 13881 -0106 -0205 -0304 -0403 Type F0001 F2302 F2300 F2401 Size mm 152x229 152x229 152x229 152x229 Specification White Cleaning Extra Cut Medium Fine Pack. qty 20 20 20 20 Art. no. 13881 -0502 -0601 -0700 -0809 Type F2504 F2503 F2302F2801 F4802 Size mm 152x229 152x229 152x229 152x229 Specification Very Fine General Purpose Micro Fine A Micro Fine S Pack. qty 20 20 20 20

Abrasive nylon sheet

For fine sanding on wood and metal on flat and contoured surfaces. Also suitable for dulling painted surfaces. Art. no. 0567 -0104 -0203 Coarseness Grit 320 600 Size mm 230×150 230×150 Pack. qty 40 40

225

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 226 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools Abrasive nylon sheet

"3M Scotch-Brite" For cleaning and polishing metal, wood and plastic. Art. no. 4082 -0102 -0201 3M No 7440 7447 Coarseness Coarse Universal Colour Brown Red Size mm 158x224 158x224 Pack. qty 10 10

-0300 7448 Fine Grey 158x224 10

Abrasive nylon rolls Abrasive nylon roller

"3M Scotch-Brite" For cleaning and polishing metal, wood and plastic. Art. no. 4089 -0105 -0303 3M-no CFR- 03760 92004 Coarseness Very fine Fine Colour Red Red Width mm 100 100 Length m 10 10 Pack. qty 1 1

-0402 92005 Fine Red 150 10 1

Abrasive nylon roller

Art. no. Type Specification Width Length Pack.

"Norton" Bear-Tex. For cleaning, surface finishing, deburring and basic polishing. The flexible design gives a smooth and constant contact with the work surface without scratching or affecting the original shape of the work piece. Can be used wet or dry. Application area: Type F2300 Strong and open structure, minor clogging, long life. Deburring, removal of rust and surface coatings. Reddish-brown. Type 2401 Reddish-brown. Type F2504 Flexible, gives an excellent and smooth result. Balancing primer, smoothing wood and plastic. Reddishbrown. Very Fine - easily torn into the required format, size and shape, directly from the roll. Type F2801 Flexible, gives an excellent surface, long life. Balancing of clear varnish on sensitive enamel. Gold yellow. Type F4802 Gives the finest finish of the highest quality. Balancing of clear varnish, finishing metal surfaces, deburring plastics. Grey. 13884 -0103 -0202 -0301 -0400 -0509 -0608 No F2300 F2401 F2504 F2504 F2801 F4802 Medium Fine Very Fine Very Fine A Long Life Micro Fine A Ultra Fine mm 100 100 100 100 100 100 m 10 10 10 10 10 10 qty 2 2 2 2 2 2

Abrasive nylon band

"Norton" Bear-Tex. For cleaning and polishing of all types of materials. Rec. working speed 25-33 m/sec. Dimensions Coarseness Correspond. Art. no. Pack. mm grit 15039 qty 13x305 C 50-80 (-0102) 10 13x305 M 100-150 (-0201) 10 13x305 VF 240-360 (-0300) 10 13x457 C 50-80 (-0409) 10 13x457 M 100-150 (-0508) 10 13x457 VF 240-360 (-0607) 10 13x520 M 100-150 (-0706) 10 13x610 C 50-80 (-0805) 10 13x610 M 100-150 (-0904) 10 13x610 VF 240-360 (-1001) 10 20x457 M 100-150 (-1100) 10 20x457 VF 240-360 (-1209) 10 20x520 M 100-150 (-1308) 10 25x610 C 50-80 (-1407) 10 25x610 M 100-150 (-1506) 10 25x610 VF 240-360 (-1605) 10 30x533 C 50-80 (-1704) 10 30x533 M 100-150 (-1803) 10 30x533 VF 240-360 (-1902) 10 50x450 XC 36-40 (-2009) 10 50x450 C 50-80 (-2108) 10 50x450 M 100-150 (-2207) 10 50x450 VF 240-360 (-2306) 10 50x800 M 100-150 (-2405) 10 50x1500 C 50-80 (-2504) 10 50x1500 M 100-150 (-2603) 10 50x2000 C 50-80 (-2702) 10 50x2000 M 100-150 (-2801) 10 226

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 227 Friday, March 27, 2009 11:08 AM

Grinding tools Coarseness VF C M VF C M VF C M C M VF VF M

Correspond. grit 240-360 50-80 100-150 240-360 50-80 100-150 240-360 50-80 100-150 50-80 100-150 240-360 240-360 100-150

Art. no. 15039 (-2900) (-3007) (-3106) (-3205) (-3304) -3403 -3502 (-3601) (-3700) (-3809) (-3908) (-4005) (-4104) (-4203)

Pack. qty 10 10 10 10 10 10 10 10 10 2 2 2 5 5

Files - Grinding tools

Dimensions mm 50x2000 50x2500 50x2500 50x2500 75x2000 75x2000 75x2000 75x3000 75x3000 90x395 90x395 90x395 100x2500 100x3500

3

MX-discs Quick discs Quick disc

"Norton" TR. Type Roloc. Built up of several layers of cotton fibre that gives the possibility of both grinding and polishing at one time. Used for medium - low removal, deburring and finishing. Recommended for the removal of small welds and machining marks and edging on stainless steel, composite materials and aluminium. Minimal clogging on nonferrous metals. Coarseness Diameter 50 mm Diameter 75 mm Rec. working speed Rec. working speed 7500-9500 r/min 4400-5800 r/min Art. no. Pack. Art. no. Pack. 13201 qty 13201 qty Coarse -0109 10 -0406 10 Medium -0208 10 -0505 10 Fine -0307 10 -0604 10 Holder 13202 -0900 -1007 -1106 -1205 -1304 For disc diameter mm 50 50 75 75 75 Spindle diameter mm 6.0 6.0 6.0 M 14 thread M 14 thread Type Medium Hard Medium Medium plastic Medium rubber Max. speed rpm 30000 30000 20000 11200 20000 Pack. qty 1 1 1 1 1

Felt polishing sanding discs Quick discs Polishing sanding discs

"Norton" TR. Type Roloc. Felt polishing disc made of felt material especially suited to polishing together with different polishing pastes. Gives attractive and fine surfaces on several materials such as stainless steel and aluminium. Diameter 50 mm Diameter 75 mm Rec. working speed Rec. working speed 7500-9500 r/min 4400-5800 r/min Art. no. Pack. Art. no. Pack. 13198 qty 13198 qty -0104 25 -0203 25 Holder 13202 -0900 -1007 -1106 -1205 -1304 For disc diameter mm 50 50 75 75 75 Spindle diameter mm 6.0 6.0 6.0 M 14 thread M 14 thread Type Medium Hard Medium Medium plastic Medium rubber Max. speed rpm 30000 30000 20000 11200 20000 Pack. qty 1 1 1 1 1

Felt polishing wheels Felt polishing wheel

White. Hardness medium. Plugged centre hole. Used especially for sanding and polishing stainless sheet. Art. no. 3242 -0309 -0507 -0705 -1000 Diam.×thickness mm 100×25 125×25 150×25 200×25 Weight approx. kg 0.15 0.20 0.27 0.50 Centre hole mm 10 10 10 10 Pack. qty 1 1 1 1 227

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 228 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Grinding tools

Polishing mops Polishing mop

Sewn. Coloured. Without hub. With 10 mm seam spacing. Centre hole standard diameter 10 mm. The mops can also be placed several wide as required. Art. no. 3245 -0058 -0108 -0207 -0306 -0405 Diameter mm 100 150 200 250 300 Thickness mm 12 12 12 12 12 Pack. qty 1 1 1 1 1

Polishing mop

"Osborn" Sewn of cotton. With hub and 6 mm stub axle. Art. no. 4317 Osborn No Diameter mm Width mm Stub axle mm Pack. qty

-0109 42089 80 12 6 5

Sisal wheels Sisal wheel

With paper hub. Sewn of sisal cloth. With tapered hole for mounting on tapered threaded points. Used for coarse polishing of stainless steel, copper, brass etc. Art. no. 2998 -0109 -0208 -0307 -0406 -0505 -0703 Diameter mm 100 150 150 200 200 250 Width mm 12 12 25 12 25 25 Pack. qty 1 1 1 1 1 1

Fibre brushes Fibre brush

For polishing stainless steel, etc. Pressed paper hub with centre marking. Dry. Art. no. 3250 -0100 -0209 Diameter mm 100 150 No. of bristle rows 4 6 Width mm 24 36 Pack. qty 1 1

-0308 200 6 50 1

Lambswool polishing bonnets Polishing bonnets Polishing hat

WithVelcro back. Used together with back-up pad. Art. no. 13899 Diameter mm Pack. qty

-0106 125 1

-0205 150 1

Polishing hat

With collar and cord for attaching round the back-up pad. Art. no. 13911 -0100 Diameter mm 125 Suitable back-up pad mm 100 Pack. qty 1

-0209 150 125 1

-0308 175 150 1

-0407 200 175 1

Polishing sponges Polishing sponges

Dense/hard (white) type for coarse cleaning and open/soft (blue) type for polishing. With internal thread for direct mounting on machine spindles or with Velcro which is fitted on the special back-up pad no 4610. Used together with different types of polishing agent. Polishing sponges with int. thread 4610 -0103 -0400 Int. thread M 14 M 14 Type Hard (white) Soft (blue) Diameter×thickness mm 150×50 150×50 Max. speed r/min 2500 2500 Pack. qty 1 1 Polishing sponges, Velcro type 4610 -0301 -0608 Type Hard (white) Soft (blue) Diameter×thickness mm 150×50 150×50 Pack. qty 1 1 228

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 229 Friday, March 27, 2009 11:08 AM

Grinding tools

Emery wax Polishing wax

Consisting of two different waxes. Grinding wax for grinding with sisal wheels and polishing wax for bright polishing with a polishing mop. Art. no. 7142 -1002 Weight approx. g 2×120 Size Coarse/Fine Pack. qty 1

Emery wax Art. no. Coarseness Weight per pack Pack.

3029 approx. kg qty

-0100 120 1.4 20

-0209 180 1.4 20

-0404 Radiance CE-SV 1.2 20

-0503 1947-SV 1.2 20

Files - Grinding tools

Grinding and polishing wax

3

Pre-polishing wax Pre-polishing wax Art. no. Name Weight per pack Pack.

3030 approx. kg qty

Brush wax Brush wax Art. no. Name Colour Used for Weight per pack Pack.

3032

approx. kg qty

-0055 2432 Grey Stainless steel 1.5 20

-0303 Ultrapol.-76 White Allmetals 1.3 20

-0402 FFF/A Red Post treatment of Chrome 1.7 15

Gloss wax Gloss wax

Used for polishing and mirror finishing with felt, gloss or buffing wheels. The wheels peripheral speed 35-40 m/sec. Art. no. 3031 -0254 -0304 -0601 Name G-300-A Alba 3 F Radiance 50 Colour White Grey Green For Allmetals Post treatment of Chrome High lustre Weight/pack approx. kg 1.6 1.7 1.3 Pack. qty 15 15 20

Polercreme Polercreme

Polercreme. Effectively releases oxides, rust and dirt. Cleans, polishes and protects. Acts as a fine polishing paste on varnish, gelcoat and hard plastics and acrylic glass. High polished finish on light metals, copper, brass, chrome and all bright metals. Does not contain silicone. Art. no. 13897 -0207 Contents g 250 Pack. qty 1

Diamond paste Diamond paste

"Norton" Diamond paste is used when you want to attain a very fine surface finish on metals as well as other materials (e.g. glass, ceramics etc.) by polishing or lapping. The paste is supplied in 5-gram syringes with standard concentration. The paste is water-soluble. 1 micron - for very fine polishing of metals, ceramics, glass etc. Ra 0-0.03 µm. 3-12 micron - for final polishing punch tools, formers, seals, etc. Ra 0.03-0.15 µm. 15-60 micron - for pre-polishing. Ra 0.15-0.50 µm. Art. no. 4383 -0603 -0801 -1007 -1106 -1304 Specification 6 micron 12 micron 20 micron 30 micron 60 micron Contents, weight g 5 5 5 5 5 Pack. qty 1 1 1 1 1 229

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 230 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Rotating steel brushes - Wire brushes

Valve grinding paste Valve grinding paste

Oil-mixed carborundum paste. Cuts fast and creates a smooth, pressure-proof valve fit. Fine and coarse grit size 320180. Art. no. 3026 -1002 Contents g 2×35 Pack. qty 1

Valve grinding paste

Oil-mixed carborundum paste. Cuts quickly and cleanly, removes carbon deposits and produces a smooth, pressure safe valve fit. Art. no. 3027 -0102 -0201 -0300 -0409 Coarseness buff.(600) buff.(400) fine(320) medium(180) Contents g 500 500 500 500 No. of tins qty 1 1 1 1 Art. no. 3027 -0508 -0607 -0706 -0805 Coarseness coarse(150) coarse(120) coarse(90) coarse(60) Contents g 500 500 500 500 No. of tins qty 1 1 1 1

Rotating steel brushes - Wire brushes Axial brushes With 6 mm stub axle Axial brush

"Osborn" Wavy toughened steel wire. For light cleaning work and surface processing. Used to remove paint, rust and slag, deburring, welding work, polishing etc. The brushes are flexible and give good operating economy. Art. no. 5343 -0104 -0203 -0302 -0500 -0401 Osborn No 41750 41751 41752 41753 41754 Diameter mm 30 40 60 70 80 Wire thickness mm 0.20 0.25 0.25 0.25 0.25 Max. speed r/min 15000 13000 10000 8500 8000 Pack. qty 5 5 5 5 5

Axial brush

"Osborn" Wavy acidproof stainless steel wire. For light cleaning work and surface processing. Used to remove paint, rust and slag, deburring, with welding work, polishing etc. For stainless steel materials and aluminium. The brushes are flexible and give good operating economy. Art. no. 3464 -0052 -0102 -0201 Osborn No 41781 41782 41784 Diameter mm 40 60 80 Wire thickness mm 0.25 0.25 0.25 Max. speed r/min 13000 10000 8000 Pack. qty 5 5 5

Axial brush

"Osborn" Wavy brass wire. Used for polishing, dulling and deburring soft metals such as brass, copper, tin, German silver, etc. The brass wires are non-sparking. Art. no. 5690 -0103 Osborn No 41762 Diameter mm 60 Wire thickness mm 0.15 Max. speed r/min 10000 Pack. qty 5

Axial brush

"Osborn" Fully filled.For light cleaning work and surface processing. Used to remove paint, rust and slag, deburring, welding work, polishing etc. The brushes are flexible and give good operating economy. Fitted with plastic cover that prevents sparking and mechanical damage with contact between the cover and the workpiece. The fully filled design gives the brush a versatile brushing capacity and is ideal for special polishing work. Art. no. 3289 -0105 -0303 -0402 -0600 Osborn No 41790 41792 41795 41797 Diameter mm 30 50 30 50 Wire thickness mm 0.25 0.25 0.25 0.25 Max. speed r/min 10500 10500 10500 10500 Pack. qty 5 5 5 5 230

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 231 Friday, March 27, 2009 11:08 AM

Rotating steel brushes - Wire brushes "Osborn" Abrasive nylon brush - SICANYL. A flexible nylon brush material with bonded abrasive grit of the type silicon carbide. The brushes have a uniform grinding effect, as new grinding material is constantly exposed as the nylon fibres wear. The brushes are especially suitable for deburring, roughening, dulling and finishing on stainless steel and aluminium. The brushes have a long life with optimal use - right speed (peripheral speed 22 m/sec) and slight pressure. Can be used for both dry and wet processing and are resistant to weak acids and lye. With normal use no supplementary work is necessary. Art. no. 3944 -0102 Osborn No 41814 Diameter mm 40 Coarseness Medium Max. speed r/min 13000 Pack. qty 5

With thread

Files - Grinding tools

Axial brush

3

Axial brush

"Osborn" Wavy toughened steel wire. For moderately difficult cleaning work and surface finishing over large areas. Used to remove paint, rust and slag, deburring, welding work, roughing, etc. The brushes are flexible and have a high removal rate and give good operating economy. Art. no. 8773 -0107 -0206 Osborn No 41720 41730 Threaded hole M 10 M 14 Diameter mm 70 70 Wire thickness mm 0.25 0.25 Max. speed r/min 10000 10000 Pack. qty 4 4

Axial brush

"Osborn" Wavy toughened steel wire. For moderately difficult cleaning work and surface finishing over large areas. Used to remove paint, rust and slag, deburring, welding work, roughing, etc. The brushes are flexible and have a high removal rate and give good operating economy. DiaWire Max. With threaded hole meter thickness speed Osborn Hub bore Art. no. Pack. mm mm r/min No thread 6009 qty 90 0.30 8500 41401 M14 -0503 1 90 0.50 8500 41411 M14 -0701 1 115 0.30 8500 41421 M14 -0107 1 115 0.30 8500 41422 W5/8 -0206 1 115 0.50 8500 41431 M14 -0222 1 115 0.50 8500 41432 W5/8 -0248 1 145 0.30 6500 41441 M14 -0263 1 145 0.50 6500 41451 M14 -0305 1 145 0.50 6500 41452 W5/8 -0404 1

Axial brush

"Osborn" Wavy acidproof stainless steel wire. For moderately difficult cleaning work and surface finishing over large areas. Used to remove paint, rust and slag, deburring, with welding work, roughing, etc. For stainless steel materials and aluminium. The brushes are flexible and have a high removal rate with good operating economy. Art. no. 6740 -0200 -0309 Osborn No 41391 41392 Diameter mm 115 115 Hub bore thread M 14 W 5/8 Wire thickness mm 0.33 0.33 Max. speed r/min 8500 8500 Pack. qty 1 1

Axial brush

"Osborn" For extremely demanding cleaning work and surface processing. Used for deburring, roughening, scaling, weld joints etc. Suitable for processing steel and concrete. Used on permanent as well as portable machines. These brushes have a high removal rate with good operating economy. The brushes withstand high peripheral speeds and have a long life. Osborn Diameter Wire thickness Row Shankholes Max. speed Art. no. Pack. No mm mm qty thread. r/min 5347 qty 41501 65 0.35 1 M 14 12500 -0027 4 41511 65 0.50 1 M 14 12500 -0043 4 41500 65 0.35 1 M 10 12500 -0050 4 41600 80 0.50 1 M 14 8500 -0704 1 41610 80 0.80 1 M 14 8500 -0100 1 41611 80 0.80 1 W 5/8 8500 -0209 1 41619 100 0.50 1 M 14 8500 -0902 1 41630 100 0.80 1 M 14 8500 -0308 1 41631 100 0.80 1 W 5/8 8500 -0407 1 231

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 232 Friday, March 27, 2009 11:08 AM

Rotating steel brushes - Wire brushes Osborn No 41650 41651 41502 41512

Files - Grinding tools

3

Diameter mm 120 120 65 65

Wire thickness mm 0.80 0.80 0.35 0.50

Row qty 1 1 1 1

Shankholes thread. M 14 W 5/8 M 14 M 14

Max. speed r/min 6500 6500 12500 12500

Art. no. 5347 -0456 -0472 -1009 -1108

Pack. qty 1 1 4 4

Axial brush

"Osborn" Slightly cupped. Wavy toughened steel wire. For moderately difficult cleaning work and surface finishing over large areas. Used to remove paint, rust and slag, deburring, with welding work, roughening etc. Universally usable and ideal for processing in areas difficult to access. The brushes are flexible and have a high removal rate with good operating economy. Art. no. 9752 -0100 -0209 Osborn No 41461 41464 Wire material Wavy toughened steel wire Wavy acidproof stainless steel wire Diameter mm 100 100 Wire diam. mm 0.33 0.33 Thread M 14 M 14 Max. speed r/min 12500 12500 Pack. qty 4 4

Axial brush

"Osborn" Slightly cupped. For extremely demanding cleaning work and surface processing. Used for deburring, roughening, scaling, weld joints etc. Suitable for processing steel and concrete. Universally usable and ideal for processing in areas difficult to access. Used on permanent as well as portable machines. These brushes have a high removal rate with good operating economy. The brushes withstand high peripheral speeds and have a long life. Osborn Diameter Wire diam. Row Shankholes Max. speed Art. no. Pack. No mm mm qty thread r/min 4047 qty 41660 100 0.35 1 M 14 12500 -0106 4 41661 100 0.50 1 M 14 12500 -0205 4 41663 115 0.35 1 M 14 12500 -0403 4 41664 115 0.50 1 M 14 12500 -0502 4 41670 100 0.35 1 M 14 12500 -0700 4 41671 100 0.50 1 M 14 12500 -0809 4 41673 115 0.35 1 M 14 12500 -0908 4 41674 115 0.50 1 M 14 12500 -1005 4

End brushes With 6 mm stub axles End brush

"Osborn" Pointed. Wavy toughened steel wire. For removing burrs, rust, slag, oxide scale, paint, excessive rubber, residual deposits and other contamination in areas difficult to access. The brushes are used in high speed pneumatic and electric powered portable machines. Art. no. 6784 -0207 Osborn No 42182 Diameter mm 22 Wire thickness mm 0.50 Max. speed r/min 18000 Pack. qty 5

End brush

"Osborn" Wavy toughened steel wire. For removing burrs, rust, slag, oxide scale, paint, excessive rubber, residual deposits and other contamination in areas difficult to access. The brushes are used in high speed pneumatic and electric powered portable machines. Art. no. 5345 -0102 -0201 -0300 -0409 -0508 Osborn No 42119 42120 42121 42122 42123 Diameter mm 10 15 22 26 30 Wire thickness mm 0.40 0.40 0.50 0.50 0.50 Max. speed r/min 20000 18000 18000 15000 15000 Pack. qty 5 5 5 5 5

End brush

Art. no. Osborn Diameter Wire thickness Max. speed Pack. 232

3466 No mm mm r/min qty

"Osborn" Wavy acidproof stainless steel wire. For removing burrs, rust, slag, oxide scale, paint, excessive rubber, residual deposits and other contamination in areas difficult to access. For stainless steel and aluminium. The brushes are used in high speed pneumatic and electric powered machines. -0100 -0209 -0308 -0407 -0506 -0605 42140 42141 42144 42145 42148 42149 15 15 22 22 26 26 0.25 0.33 0.25 0.33 0.25 0.33 18000 18000 18000 18000 18000 18000 5 5 5 5 5 5

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 233 Friday, March 27, 2009 11:08 AM

Rotating steel brushes - Wire brushes "Osborn" For removing burrs, slag, paint, rust, excessive rubber, residual deposits and other contamination in areas difficult to access and internal surfaces. The special characteristics of these brushes are flexibility and their large cleaning capacity. The diameter of the brush expands due to centrifugal forces depending on the speed, which is why they are also suitable for cleaning the inside of cylindrical holes and tubes. The brushes are used in high speed pneumatic and electric powered portable machines. Art. no. 3288 -0106 -0205 -0304 -0403 -0502 Osborn No 42290 42298 42292 42294 42295 Diameter mm 20 23 23 30 30 Wire thickness mm 0.35 0.26 0.35 0.26 0.35 Max. speed r/min 22000 20000 20000 20000 20000 Pack. qty 5 5 5 5 5 Art. no. 3288 -0601 -0700 -0809 -0908 -1005 Osborn No 42291 42299 42293 42296 42297 Diameter mm 20 23 23 30 30 Wire thickness mm 0.26 0.26 0.35 0.26 0.35 Max. speed r/min 22000 20000 20000 20000 20000 Pack. qty 5 5 5 5 5

Files - Grinding tools

End brush

3

End brush

"Osborn" Plastic encapsulated For aggressive rust removal, deburring, cleaning of weld joints, paint removal, etc. The wires are encapsulated in a plastic compound, which gives optimal distribution of the wire and a very safe design. Through short brush lengths very aggressive processing is obtained. Made of brass plated steel wire which gives good resistance to corrosion. Art. no. 1532 -0104 Osborn No 42202 Diameter mm 24 Wire thickness mm 0.30 Max. speed r/min 18000 Pack. qty 5

End brush

"Osborn" Abrasive nylon brush - SICANYL. A flexible nylon brush material with bonded abrasive grit of the type silicon carbide. The brushes have a uniform grinding effect, as new grinding material is constantly exposed as the nylon fibres wear. The brushes are especially suitable for deburring, roughening, dulling and finishing on stainless steel and aluminium. The brushes have a long life with optimal use - right speed (peripheral speed 22 m/sec) and slight pressure. Can be used for both dry and wet processing and are resistant to weak acids and lye. With normal use no supplementary work is necessary. Art. no. 3946 -0100 -0209 Osborn No 42230 42231 Diameter mm 15 22 Coarseness Medium Medium Max. speed r/min 18000 18000 Pack. qty 5 5

Circular brushes With 6 mm stub axle Circular brush with 6 mm stub axle

"Osborn" Wavy toughened steel wire. For light paint and rust removal, deburring, welding work, roughening, cleaning and polishing. The brushes are used in high speed pneumatic and electric powered portable machines and in robot operations. Art. no. 5348 -0109 -0208 -0307 -0406 -0505 -0703 Osborn No 41852 41853 41855 41857 41858 41859 Diameter mm 25 40 50 60 75 100 Width mm 7 12 14 14 14 14 Wire thickness mm 0.20 0.25 0.25 0.25 0.25 0.25 Max. speed r/min 20000 18000 15000 15000 12000 7000 Pack. qty 5 5 5 5 5 5

Circular brush

"Osborn" Wavy acidproof stainless steel wire. For light paint and rust removal, deburring, welding work, roughening and polishing. For stainless steel and aluminium. The brushes are used in high speed pneumatic and electric powered portable machines and in robot operations. Art. no. 5694 -0406 -0505 -0109 -0208 -0307 Osborn No 41862 41863 41865 41867 41869 Diameter mm 25 40 50 60 75 Width mm 7 12 12 14 14 Wire thickness mm 0.25 0.25 0.25 0.25 0.25 Max. speed r/min 20000 18000 15000 15000 12000 Pack. qty 5 5 5 5 5 233

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 234 Friday, March 27, 2009 11:08 AM

Rotating steel brushes - Wire brushes Circular brush with stub axle

Files - Grinding tools

3

"Osborn" Wavy brass wire. Used for polishing, dulling and deburring soft metals such as brass, copper, tin, German silver, etc. The brass wires are non-sparking. Art. no. 5692 -0200 -0309 -0408 -0101 Osborn No 41872 41873 41875 41877 Diameter mm 25 40 50 60 Wire thickness mm 0.15 0.15 0.15 0.15 Max. speed r/min 20000 18000 15000 15000 Pack. qty 5 5 5 5

Circular brush with stub axle

"Osborn" For extremely demanding cleaning work and surface processing. Used when deburring, roughening, scaling, weld joints, etc. These brushes have a high removal rate with good operating economy. The brushes are used in high speed pneumatic and electric powered portable machines and in robot operations. Art. no. 4044 -0109 -0208 Osborn No 41105 41106 Diameter mm 75 75 Width mm 8 8 Wire thickness mm 0.35 0.50 Max. speed r/min 20000 20000 Pack. qty 5 5 Art. no. 4044 -1008 Osborn No 41108 Diameter mm 75 Width mm 8 Wire thickness mm 0.35 Max. speed r/min 20000 Pack. qty 5

Circular brush with 6 mm stub axle

"Osborn" Plastic enclosed. For aggressive rust removal, deburring, cleaning of weld joints, paint removal, etc. The wires are encapsulated in a plastic compound, which gives optimal distribution of the wire and a very safe design. Through short brush lengths very aggressive processing is obtained. Made of brass plated steel wire which gives good resistance to corrosion. Art. no. 1530 -0601 Osborn No 41887 Diameter mm 76 Width mm 8 Wire thickness mm 0.30 Max. speed r/min 15000 Pack. qty 5

Circular brush with 6 mm stub axle

"Osborn" Abrasive nylon brush - SICANYL. A flexible nylon brush material with bonded abrasive grit of the type silicon carbide. The brushes have a uniform grinding effect, as new grinding material is constantly exposed as the nylon fibres wear. The brushes are especially suitable for deburring, roughening, dulling and finishing on stainless steel and aluminium. The brushes have a long life with optimal use - right speed (peripheral speed 22 m/sec) and slight pressure. Can be used for both dry and wet processing and are resistant to weak acids and lye. With normal use no supplementary work is necessary. Art. no. 3945 -0101 -0200 Osborn No 41920 41921 Diameter mm 50 75 Coarseness Medium Medium Max. speed r/min 15000 12000 Pack. qty 5 5

With thread Circular brush

"Osborn" For both medium difficult and exact treatment such as rust removal, paint removal, roughing and even structuring of wood. Equipped with cord-wire of soft steel, that gives a soft and flexible brush to work with, at the same time as the large area of wire tips gives a good working result. Art. no. 14458 -0107 Osborn No 41682 Wire material Cord-wire steel Diameter mm 115 Wire diameter mm 0.27 Thread M14 Max. speed rpm 12000 Pack. qty 1

234

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 235 Friday, March 27, 2009 11:08 AM

Rotating steel brushes - Wire brushes

Files - Grinding tools

With hub bore

3

Circular brush with hub bore

"Osborn" For moderately difficult surface finishing. Used to remove paint, rust, deburring, with welding work, roughening, polishing, coarse-polishing etc. With steel tube hub. DiaWidth ShankMax. Wire thickness Wire thickness meter holes speed 0.25 mm 0.33 mm Osborn Art. no. Pack. Osborn Art. no. Pack. mm mm mm r/min No 5353 qty No 5353 qty 100 10 13 8000 40330 -7304 1 100 17 13 8000 40340 -0127 1 100 23 13 8000 40350 -0259 1 125 18 13 6000 40370 -0424 1 125 18 16 6000 40375 -0457 1 150 18 13 6000 40400 -0606 1 40401 -0705 1 150 18 16 6000 40407 -0655 1 150 28 13 6000 40410 -0804 1 40411 -0903 1 175 20 20 6000 40440 -1000 1 40441 -3709 1 175 28 20 6000 40450 -3907 1 200 25 20 4500 40480 -1109 1 40481 -1208 1 200 35 20 4500 40490 -1307 1 40491 -1406 1 250 30 20 3600 40520 -5605 1 40521 -5704 1 250 40 20 3600 40531 -1505 1 300 50 20 3000 40571 -7106 1 100 10 13 8000 40710 -8005 1 100 17 13 8000 40720 -8203 1 150 10 13 6000 40740 -8609 1 40741 -8708 1 150 18 13 6000 40750 -1539 1 40751 -8807 1 150 28 13 6000 40760 -1554 1 200 25 20 4500 40780 -9052 1 40781 -9102 1 200 35 20 4500 40791 -1703 1

Circular brush with hub bore

"Osborn" For extremely demanding surface processing. Used for deburring, roughening, scaling, weld joints etc. With steel tube hub. These brushes have a high removal rate with good operating economy. The brushes withstand high peripheral speeds and have a long life. Osborn DiaWidth ShankWire Row Max. Art. no. Pack. meter holes thickness qty speed No mm mm mm mm r/min 1813 qty 41117 115 12 22 0.35 1 12500 -0229 4 41118 115 12 22 0.50 1 12500 -0245 4 41130 125 13 22 0.35 1 10000 -0260 1 41131 125 13 22 0.50 1 10000 -0286 1 41151 150 13 22 0.50 1 9000 -0302 1 41152 150 13 22 0.80 1 9000 -0401 1 41158 178 13 22 0.50 1 9000 -0500 1 41164 200 13 20 0.50 1 8500 -5129 1 41165 200 13 20 0.80 1 8500 -5145 1 41120 115 12 22 0.35 1 12500 -1102 4 41121 115 12 22 0.50 1 12500 -1201 4 41133 125 13 22 0.35 1 10000 -1300 1 41134 125 13 22 0.50 1 10000 -1409 1

Circular brush with hub bore

"Osborn" Abrasive nylon brush - SICANYL. A flexible nylon brush material with bonded abrasive grit of the type silicon carbide. The brushes have a uniform grinding effect, as new grinding material is constantly exposed as the nylon fibres wear. The brushes are especially suitable for deburring, roughening, dulling and finishing on stainless steel and aluminium. The brushes have a long life with optimal use - right speed (peripheral speed 22 m/sec) and slight pressure. Can be used for both dry and wet processing and are resistant to weak acids and lye. With normal use no supplementary work is necessary. Osborn No 41330 41331 41332 41340 41341 41342 41360 41361 41362

Diameter mm 100 100 100 150 150 150 200 200 200

Width

Shankholes mm

mm 17 17 17 18 18 18 25 25 25

13 13 13 13 13 13 20 20 20

Max. speed r/min 8000 8000 8000 6000 6000 6000 4500 4500 4500

Wire thickness mm 1.0 0.55 0.8 1.0 0.55 0.8 1.0 0.55 0.8

Gritsize 80 120 180 80 120 180 80 120 180

Art. no. 3948 -0108 -0306 -0207 -0702 -0900 -0801 -1304 -1502 -1403

Pack. qty 1 1 1 1 1 1 1 1 1 235

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 236 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Rotating steel brushes - Wire brushes

Pipe brushes Pipe brush

"Osborn" Wavy brass wire. For brass and copper pipe. Brush length 80 mm. Total length 115 mm. For processing of internal surfaces in holes, pipes, tubes and ducts. Also used for cleaning, deburring, polishing etc. The brushes are suitable for both mechanical and manual work. Pipe brushes in other dimensions and materials quoted on request. Art. no. 9391 -0107 -0206 -0305 -0404 -0503 -0602 -0701 Osborn No 35310 35312 35314 35316 35318 35320 35324 Diameter mm 10 12 14 16 18 20 24 Fixed thread W 3/16 3/16 ¼ ¼ ¼ ¼ ¼ Pack. qty 5 5 5 5 5 5 5

Pipe brush

"Osborn" Wavy toughened steel wire. For steel pipe. Brush length 80 mm. Total length 115 mm. For processing of internal surfaces in holes, pipes, tubes and ducts. Also used for cleaning, deburring, polishing etc. The brushes are suitable for both mechanical and manual work. Pipe brushes in other dimensions and materials quoted on request. Art. no. 3284 -0027 -0035 -0050 -0100 -0209 Osborn No 35408 35410 35412 35414 35416 Diameter mm 8 10 12 14 16 Fixed thread W 3/16 3/16 3/16 ¼ ¼ Pack. qty 5 5 5 5 5 Art. no. 3284 -0407 -0605 -0803 -1009 Osborn No 35418 35420 35422 35424 Diameter mm 18 20 22 24 Fixed thread W ¼ ¼ ¼ ¼ Pack. qty 5 5 5 5

Shank to pipe brushes

"Osborn" Shank and extensions for pipe brushes with fixed thread W 3/16 or W ¼. Shank 3239 -0106 Osborn No 35325 Length mm 500 Fixed thread W 3/16 Pack. qty 1 Extension section 3239 -0304 Osborn No 35327 Length mm 500 Pack. qty 1

-0205 35326 500 ¼ 1 -0403 35328 500 1

Boiler brushes Boiler brush

"Osborn" Round oil-tempered cast steel wire 0.30 mm. Art. no. 3285 -0109 -0208 -0307 Osborn No 35525 35532 35537 Diameter mm 25 32 37 Fixed thread W ½ ½ ½ Total length mm 145 145 145 Pack. qty 1 1 1

-0505 35550 50 ½ 145 1

-0703 35562 62 ½ 145 1

-0901 35575 75 ½ 145 1

Cylinder brush

"Osborn" Made of curved steel filament 2×0.2 mm. Three spirals. Art. no. 9189 -0103 Osborn No 35875 Diameter mm 75 Fixed thread W ½ Pack. qty 5

-0202 35899 100 ½ 5

Boiler brushes Boiler brush

"Osborn" Wavy toughened steel wire 0.25 mm. Art. no. 9188 Osborn No Size mm Total length mm Fixed thread W Pack. qty

236

-0104 38570 80×30 135 ½ 1

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

-1305 35599 100 ½ 145 1

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 237 Friday, March 27, 2009 11:08 AM

Rotating steel brushes - Wire brushes

Handle for boiler brushes

"Osborn" For boiler brushes and tube cleaners. Made of 10×1.75 mm spring steel. Wooden handle. Art. no. 5366 -0106 Osborn No 39100 Fixed thread int. W ½ Total length mm 1000 Pack. qty 1

Wire brushes Cycle brushes

Files - Grinding tools

Shank

3

Cycle brush

"Osborn" White nylon. Plastic handle with hanging hole. Art. no. 9749 Osborn No No. of rows Brush height mm Total length mm Pack. qty

-0106 33502 2 20 275 10

Cycle brush

"Osborn" Black PVC. Plastic handle with hanging hole. Art. no. 5695 Osborn No No. of rows Brush height mm Total length mm Pack. qty

-0207 33512 2 20 275 10

Cycle brush

"Osborn" Round cast steel wire 0.33 mm. Plastic handle with hanging hole. Art. no. 3267 -0101 -0200 Osborn No 33521 33522 No. of rows 1 2 Brush height mm 25 25 Total length mm 270 270 Pack. qty 10 10

-0309 33523 3 25 270 10

Brake caliper brushes Brake caliper brush

"Osborn" Designed especially for cleaning brake calipers. With rubber handle. Art. no. 14445 -0103 -0202 Osborn No 33010 33011 No. of rows ea. 2 2 Brush height mm 23 23 Wire type straight steel wire wavy steel wire Total length mm 245 245 Pack. qty 1 1

-0301 33012 2 23 wavy brass wire 245 1

237

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 238 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Rotating steel brushes - Wire brushes Heavy-duty brushes Heavy-duty brush, ergonomic

"Osborn" Ergonomic design. Newly developed wire brush with grip friendly handle covered with rubber for assured grip and designed to give protection for the fingers. Made of 0.33 mm oil-tempered steel wire. Art. no. 0256 -0100 -0209 -0308 -0407 -0506 Osborn No 32601 32602 32603 32604 32605 No. of rows 1 2 3 4 5 Brush height mm 25 25 25 25 25 Total length mm 275 275 275 275 275 Pack. qty 5 5 5 5 5

Heavy-duty brush

"Osborn" Round cast steel wire 0.33 mm. Quantity Dim. Plastic handle Osborn Art. no. Pack. rows mm No 3268 qty 2 270×25 31002 -0209 10 3 280×25 31003 -0308 10 4 280×25 31004 -0407 10 5 280×25 31005 -0506 10

With wooden handle Osborn Art. no. Pack. No 3268 qty 31012 -1009 12 31013 -1108 12 31014 -1207 12 31015 -1306 12

Heavy-duty brush, ergonomic

"Osborn" Ergonomic design Newly developed wire brush with grip friendly handle covered with rubber for assured grip and designed to give protection for the fingers. Made of 0.30 mm straight acidproof stainless wire. Art. no. 0271 -0101 -0200 -0309 -0408 Osborn No 32611 32612 32613 32614 No. of rows 1 2 3 4 Brush height mm 25 25 25 25 Total length mm 275 275 275 275 Pack. qty 5 5 5 5

Heavy-duty brush

"Osborn" Polishing brush. Wavy brass wire 0.20 mm. For polishing brass, bronze, gold and silverware and the like. Plastic handle with hanging hole. Art. no. 5360 -0102 -0201 -0300 Osborn No 32032 32033 32034 No. of rows 2 3 4 Brush height mm 25 25 25 Total length mm 270 280 280 Pack. qty 10 10 10

Heavy-duty brush, ergonomic

"Osborn" Ergonomic design Newly developed wire brush with grip friendly handle covered with rubber for assured grip and designed to give protection for the fingers. Made of 0.20 mm slightly crimped brass wire. Art. no. 0288 -0102 -0201 -0300 -0409 -0508 Osborn No 32621 32622 32623 32634 32625 No. of rows 1 2 3 4 5 Brush height mm 25 25 25 25 25 Total length mm 275 275 275 275 275 Pack. qty 5 5 5 5 5

238

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 239 Friday, March 27, 2009 11:08 AM

Rotating steel brushes - Wire brushes "Osborn" Wavy acidproof stainless wire 0.25 mm. For buffing stainless steel material and aluminium. Quantity Dim. Plastic handle With wooden handle Osborn Art. no. Pack. Osborn Art. no. Pack. rows mm No 5355 qty No 5355 qty 1 270×25 31046 -0059 10 2 270×25 31047 -0109 10 31057 -1008 12 3 280×25 31048 -0208 10 31058 -1107 12 4 280×25 31049 -0307 10 -

Heavy-duty brush

"Osborn" Round cast steel wire 0.30 mm. With scraping iron. For removal of paint on metal, etc. Fitted with scraper edge, reversible and replaceable scraper blade. Plastic handle with hanging hole. Art. no. 3272 -0203 Osborn No 31075 No. of rows 6 Brush height mm 25 Scraper width mm 45 Total length mm 235 Pack. qty 5

Files - Grinding tools

Heavy-duty brush

3

Weld brushes Weld brush

"Osborn" Round cast steel wire 0.40 mm. Suitable for cleaning in corners/angles. Wooden handle with hanging hole. Art. no. 5357 -0206 Osborn No 33002 No. of rows 3 Brush height mm 35 Total length mm 295 Pack. qty 10

Stucco brushes Stucco brush

"Osborn" Round cast steel wire. Wooden back and metal handle. Art. no. 3273 Osborn No Size mm Brush height mm Pack. qty

-0103 34020 220×65 35 5

Wire brushes with belt Wire brush with belt

"Osborn" Wire brush with flat hardened steel wire 1.1 x 0.25 mm. For cleaning wood before painting. Removes flaking paint and loose wood, at the same time as the flat wires are gentle on the wood. Art. no. 14456 -0109 Osborn No 34022 Size mm 200x60 Brush height mm 35 Pack. qty 6

239

Luna_deburring_tools_-_files_-_grinding_tools_-_steel_brushes.fm Page 240 Friday, March 27, 2009 11:08 AM

Files - Grinding tools

3

Rotating steel brushes - Wire brushes

Steel wire brooms Steel wire broom

"Osborn" Round cast steel wire 0.50 mm. Wooden back and round handle hole. Supplied without shank. Art. no. 0056 -0102 Osborn No 34025 Size mm 300×67 Brush height mm 70 Pack. qty 10

Steel wire deck brushes Steel wire deck brush

"Osborn" Round cast steel wire 0.50 mm. Wooden back and round handle hole. Supplied without shank. Suitable handle with round fitting. Art. no. 3770 -0101 Osborn No 34030 Size mm 220×55 Brush height mm 50 Pack. qty 10

File brushes File brush

"Osborn" With Velcro. Wooden handle. Art. no. 5698 Osborn No Length without handle mm Width mm Pack. qty

-0105 32559 115 40 10

Machine cleaning brushes Machine cleaning brush

"Osborn" Horsehair. With sheet iron back and handle of twisted iron wire. For cleaning machine tools. Art. no. 3277 -0109 Osborn No 34012 Brush height mm 35 Total length mm 310 Pack. qty 10

Machine cleaning brush

"Osborn" Black horsehair mixture. Wooden handle. For cleaning machine tools. Art. no. 7139 -0108 Osborn No 34010 Brush height mm 40 Total length mm 550 Pack. qty 10

240

Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.