Environmental Services and Replacement Parts CONSOLIDATED CATALOG NORTH AMERICA
143302_Segmark 1
6/16/09 11:18:38 AM
Environmental Services RESPONSIVE AND COMPETITIVE SOLUTIONS
Alstom is a leading global supplier of environmental services and replacement parts to the power generation and industrial power markets.
Alstom Offers: E XPERIENCE | With over 1000 air quality control systems installed in the United States, and a track record spanning over 100 years, we believe you cannot find a partner whose experience in the utility and industrial power industries matches ours. We are dedicated to meeting your needs and exceeding your expectations. Our track record proves it.
INNOVATION | Each and every day, Alstom’s research and development teams are bringing new environmental control systems, products and services to bear on your environmental compliance challenges. Your performance is our measure of success.
TECHNOLOGY | With leading edge technology products and services throughout the entire power plant, Alstom has the solution to your electrostatic precipitator, baghouse, wet or dry scrubber or SCR service and replacement parts needs.
L OGISTICS | The right parts, in the right place at the right time. That is our commitment. With a wide range of options from Inventory Management Programs to Just In Time delivery to consolidated outage packages, Alstom provides far more than just “parts”. We offer the industry’s most comprehensive and innovative replacement parts inventory programs.
With an installed base of over 200 GW
flue gas desulfurization systems and
to simply repair, replace or rebuild
in pollution control systems, Alstom
selective catalytic reduction.
existing equipment and components.
environmental technology includes
Alstom has the experience and
innovative equipment previously
Tightening emissions standards. Fuel
resources you need to develop and
sold under leading brands such as
switching. Emission credits. These
maintain a compliance strategy that
Combustion Engineering, Flakt, P.C.
are but a few of the issues driving
reduces your overall operating costs
Walther, Carborundum and ABB.
the emission control strategies of our
while making sure you continue to
Our flexible and customized expert
power generation and industrial power
meet increasingly stringent emission
services cover the full flue gas line,
customers. And, with our unparalleled
control standards. Simply put,
including electrostatic precipitators,
expertise in environmental services, we
Alstom is your best partner to power
fabric filtration systems, wet and dry
offer much more than just the ability
your environmental performance.
2
143302_Segmark 2
6/18/09 3:31:38 PM
CONTENTS Technical Services Service Centers ............................................................................................................................4 Service Capabilities ......................................................................................................................5
Particulate Solutions-Electrostatic Precipitators ESP - Electrostatic Precipitators .................................................................................................6 ESP Rebuilds + Upgrades ............................................................................................................7 ESP Replacement Parts...............................................................................................................8 Electronic Systems.....................................................................................................................15
Particulate Solutions-Fabric Filters Fabric Filtration ..........................................................................................................................18 Fabric Filter Controls..................................................................................................................20 Particulate Monitoring Solutions ...............................................................................................21 ePTFE Membrane Filter Bags ...................................................................................................22 Replacement Parts.....................................................................................................................23
Gaseous Solutions-Selective Catalytic Reduction SCR Replacement Catalyst ........................................................................................................28
Gaseous Solutions-Wet Flue Gas Desulfurization Innovative Upgrades ..................................................................................................................30 WFGD Products ........................................................................................................................31
Gaseous Solutions-Dry Flue Gas Desulfurization DFGD .........................................................................................................................................32 Flex Shaft Atomizer Rebuilds .....................................................................................................33 Flex Shaft Atomizer Replacement Parts ....................................................................................34
Contact Information Contact Information...................................................................................................................43
3
143302_Segmark 3
6/16/09 11:18:45 AM
Technical Services SCR
FULL SERVICE PROVIDER OF AIR POLLUTION CONTROL TECHNICAL SERVICES Alstom offers an array of services to solve your Air Pollution Control equipment problems. Regardless of the OEM design or process application, Alstom Environmental Services has the experience and knowhow to provide some of the world’s most advanced and comprehensive service. Because of our strategically located service centers, we are positioned to respond immediately to your emergency needs. We can be on the way to almost any location within the continental United States in as little as an hour, and at your plant site working well within 24 hours.
Service Centers
Harrisburg, PA
*
Denver, CO
*
Erlanger, KY
*
Chattanooga, TN
*
Suwanee, GA
Tyler, TX
*
*
TODAY’S PROBLEMS CANNOT WAIT FOR TOMORROW’S SOLUTIONS! | The knowledge and skill of our Technical Service Team is continually honed through training and decades of experience servicing, upgrading and rebuilding all types of Alstom Pollution Control (APC) equipment. The team brings YOU unparalleled field expertise, capable of solving the most challenging problems that you face. Alstom has been in the APC business for over 100 years. As a trusted partner, you can count on us to deliver best-in-class solutions to your situations. With six strategically located service centers in the U.S., we are positioned to provide the dedicated service you need, when you need it. With expert service professionals experienced in utility, pulp & paper, waste to energy, and industrial back end equipment, Alstom is ready to serve you.
Don’t hesitate to contact us today!
4
TECHNICAL SERVICES
143302_Segmark 4
6/18/09 12:44:36 PM
Technical Services Service Capabilities Contract Services:
Per Diem Services:
Project Services:
• Full scope, full service
• Emergency & forced outage
• Construction completion
outage management
• Service & maintenance contracts
inspections & repairs
• Routine scheduled inspections & repairs
• Installation services • Advisory & supervisory services
• Upgrades & enhancements • Airflow distribution tests
• Process & equipment diagnostics
• Operations & maintenance training
• Scheduled/periodical maintenance & repairs
• Installation services • Advisory & supervisory services
• Upgrades & enhancements • Airflow distribution tests • Process & equipment
verification & pre-start-up checkout
• Equipment & system start-up • Commissioning total systems • Witness & verification of performance testing
• Coordinate & perform warranty repairs
• Operations & maintenance training
diagnostics
• Operations & maintenance training
Technologies Served and Experience Background Electrostatic Precipitators Dampers Fabric Filters Dry Flue Gas Desulfurization Wet Flue Gas Desulfurization SCRs
TECHNICAL SERVICES
143302_Segmark 5
5
6/16/09 11:18:48 AM
Particulate Experience Electrostatic Precipitators Strength in Experience EXPERTISE: 200 GW | of ESP units in operation Complete staff | of ESP project managers Ongoing R&D | in innovative ESP design Extensive experience | and expertise in evaluating ESP upgrades Largest coal database | in the world for ESP sizing and design Service personnel | in place to inspect and evaluate ESP units
ALSTOM HAS BEEN DESIGNING AND BUILDING | electrostatic precipitators (ESPs) based upon our own technology and expertise – and that of legacy original equipment manufacturers – for over 100 years. As our lineage includes technology from the OEMs listed below, we are uniquely positioned to service ESPs from a multitude of manufacturers, including:
• Carborundum • FLAKT • BBC (Brown Boveri Electric) • Combustion Engineering, Inc. • P.C. Walther • ABB (Asea Brown Boveri) Over the past 100 years, we have developed a number of design innovations in precipitator technology. As a result of this technological expertise and our broad experience, we offer designs, configurations and components that are ideally suited to a wide range of utility and industrial applications.
All upgrade parts | available from Alstom
6
ESP - ELECTROSTATIC PRECIPITATOR
143302_Segmark 6
6/18/09 12:44:39 PM
Electrostatic Precipitator - Experience ESP Rebuilds and Upgrades UNPARALLELED EXPERIENCE Consider Alstom’s engineering expertise for your electrostatic precipitator rebuild project. With over 200 GW of power generation using Alstom technology for ESP systems, our team is a viable technology partner for your upgrade. We are committed to using the best in class technology to improve your system operations.
EXPERIENCED SOLUTIONS FOR EMISSION REDUCTION Mechanical Upgrade options: CHANGES TO ELECTRODE GEOMETRY
• Upgrade discharge electrodes • Changes in plate size & spacing • Adding collecting area CLEANING (RAPPING) SYSTEMS
• Optimized rapping • Off flow cleaning • Tumbling hammer rapping • Magnetic impulse rapping • Sectionalized cleaning GAS DISTRIBUTION IMPROVEMENTS
• Baffles using CFD/physical modeling • Repairing casing & access points
FEATURES:
• Integrated EPIC DON’T LIMIT YOUR UPGRADE TO MECHANICAL REPLACEMENTS... MAXIMIZE YOUR SYSTEM’S PERFORMANCE! Alstom is able to integrate our state-of-the-art electronics capabilities with mechanical upgrades to help achieve significant enhancements to your system’s performance.
III Controller (see page 15)
• Ethernet based communications
• Powerdown rapping
• High frequency power supplies (Switched Integrated Rectifier see page 15)
ESP - ELECTROSTATIC PRECIPITATOR
143302_Segmark 7
7
6/18/09 12:44:40 PM
Electrostatic Precipitator - Logistics FLAKT/Carborundum Style Replacement Parts
pg 9 pg 11 pg 11
pg 10 pg 14
pg 9 pg 10
8
ESP - ELECTROSTATIC PRECIPITATOR
143302_Segmark 8
6/16/09 11:18:52 AM
Electrostatic Precipitator - Logistics Insulators
[1]
[2]
Description
Part No.
Item No.
FEED THRU (BUSHING) INSULATOR (CONICAL/METRIC) FEED THRU (BUSHING) INSULATOR 36"L SUPPORT INSULATOR 17"OD, 14-9/16"H SUPPORT INSULATOR 17"OD, 20"H OTHER INSULATORS AVAILABLE
0000-SD-062-007
1
0000-SD-062-009 0000-SD-043-005 0000-SD-043-006 ON REQUEST
1 2 2
Emitting System Electrodes
Connection type: 1 [1] 2 [2]
Description
Part No.
Item No.
MULTIPEAK EMITTING ELECTRODE
ON REQUEST
1
SPIRAL EMITTING ELECTRODE
ON REQUEST
2
ESP - ELECTROSTATIC PRECIPITATOR
143302_Segmark 9
9
6/16/09 11:18:53 AM
Electrostatic Precipitator - Logistics Emitting System Rapping Side Drive 3
2
6
1
5 7
4
Description
Part No.
Item No.
GEARBOX
ON REQUEST
1
COUPLING MALE COUPLING FEMALE DUST REMOVAL SCREW PACKING HEATING ELEMENT MOTOR DRIVE SHAFT INSULATOR 12-7/8"L
0000-SD-032-004 (-02) 0000-SD-032-004 (-01) ON REQUEST 000-03-12-10-01 ON REQUEST ON REQUEST 0000-SD-033-010
2 2 3 4 5 6 7
Rapping 11
[1]
[2]
[3]
[4]
[5]
[6]
9 10
8
Description
Part No.
ANVIL (BOLTED CONNECTION TO SHOCK BAR, FAA) ANVIL (OLD TYPE FAA)
ON REQUEST
1,8
000-02-03-02
2
INNER ARM/HAMMER CLAMP (2” SHAFT) HAMMER ASSEMBLY - 3-1/2" DIA.
V3100490
3,9
0000-SD-031-002
4,10
HAMMER ASSEMBLY - 4-1/2" DIA.
0000-SD-031-001
4,10
HAMMER ASSEMBLY - 5" DIA. 0000-SD-031-003 FEMALE SHAFT COUPLING (MULTIPLE SIZES) ON REQUEST
4,10 5
MALE SHAFT COUPLING (MULTIPLE SIZES) ON REQUEST
10
[7]
SHAFT
ON REQUEST
SHIM FOR SLIDE BEARING
0000-SD-030-006
SHOCK BAR
ON REQUEST
SLIDE (PILLOWBLOCK) BEARING
0000-SD-030-005-ASSY
Item No.
6
7,11
ESP - ELECTROSTATIC PRECIPITATOR
143302_Segmark 10
6/16/09 11:18:55 AM
Electrostatic Precipitator - Logistics Emitting System Rapping Top Drive 9
1
8 7 4
2 3
5
11
10
6
Description
Part No.
Item No.
AXIAL SPLIT BEARING (VERTICAL DRIVE SHAFT) FLAT (THRUST) BEARING (UPPER AXIAL BEARING, VERTICAL DRIVE SHAFT) BEARING (LOWER AXIAL BEARING, VERTICAL DRIVE SHAFT) GEARWHEEL, SMALL GEARWHEEL, LARGE COUPLING MALE COUPLING FEMALE FIBER PACKING HEATING ELEMENT MOTOR DRIVE SCREEN TUBE SHAFT INSULATOR 12-7/8"L
0000-SD-033-026-02
1
ON REQUEST
2
0000-SD-033-026-01
3
0000-SD-030-013 0000-SD-030-012 0000-SD-032-005 (-02) 0000-SD-032-005 (-01) 000-03-12-10-01 ON REQUEST ON REQUEST ON REQUEST 0000-SD-033-010
4 5 6 6 7 8 9 10 11
Dust Discharge System [1]
[2]
[3]
[4]
[5]
[6]
Description
Part No.
Item No.
BEARING
ON REQUEST
1
GRAPHITE BEARING
ON REQUEST
2
BREAK WHEEL
ON REQUEST
3
CHAIN
V00-4537
4
MASTERLINK
000-05-02-04
4
ATTACHMENT ANGLE
0000-MD-051-046-01
-
CHAINWHEEL/SPROKET
ON REQUEST
5
SLIDE BEARING
ON REQUEST
6 ESP - ELECTROSTATIC PRECIPITATOR
143302_Segmark 11
11
6/16/09 11:18:55 AM
Electrostatic Precipitator - Logistics P.C. WALTHER Style Replacement Parts
12
ESP - ELECTROSTATIC PRECIPITATOR
143302_Segmark 12
6/18/09 12:44:48 PM
Electrostatic Precipitator - Logistics Support Insulator Assembly — Rapper Shaft and Components Description
Part No.
BUSHING, C.E. RAPPER SHAFT
S2-51
LINK, C.E. HAMMER
S2-52F
BEARING, C.E. RAPPER SHAFT
S2-61
DRIVE, C.E. RAPPER 4000:1
ON REQUEST
PACKING
S2-71
SPACER, C.E. SUPPORT BEAM
S2-72
PILLOW BLOCK, C.E. RAPPER SHAFT
S2-76
MOTOR, C.E. RAPPER, 1/4" HP, 1 PH
ON REQUEST
MOTOR, C.E. RAPPER, 1/4" HP, 3 PH
ON REQUEST
HAMMER, C.E. (REPLACES S2-55, INCLUDES S2-116, S2-117 & BOLT/NUT)
S2-118
SHAFT
ON REQUEST
Discharge Electrode Element — Discharge Electrode Frame Description
Part No.
STOP BUSHING
S3-46
BUSHING
S3-47
INSULATOR, SUPPORT , PORCELAIN
S3-51
INSULATOR, SUPPORT, ALUMINA
S3-52
GASKET, SUPPORT INSULATOR
S3-57B
DE HAMMER ASSEMBLIES (INCLUDES SPACER, BOLTS, NUTS & WASHERS) ANVIL D.E. W/FRAME SECTION
S3-70 S3-175
INSULATOR DE RPR SHAFT (INQUIRE FOR S3-128, S3-136, S3-129 SIZING) LINK DE HAMMER S3-67 SHAFT
ON REQUEST ESP - ELECTROSTATIC PRECIPITATOR
143302_Segmark 13
13
6/18/09 12:44:53 PM
Electrostatic Precipitator - Logistics Collecting System Plates (Dimensions in Inches)
[1]
14
ESP - ELECTROSTATIC PRECIPITATOR
143302_Segmark 14
6/16/09 11:18:58 AM
Electrostatic Precipitator - Technology Electronic Systems With Alstom’s decades of electronic monitoring and data collection experience in utility and industrial power generation installations, our Switched Integrated Rectifier (SIR™), and Advanced Electrostatic Precipitator Integrated Controller (EPIC III™) systems provide our customers with the latest technology. These upgrades help you achieve significantly improved system performance and operational reliability, with reductions in energy and material consumption and lower installation, maintenance and operating costs.
SIR – SWITCHED INTEGRATED R ECTIFIER 120 K W SIR BENEFITS:
• Improved ESP performance
• Reduced emissions • Short payback time • Remote control and monitoring via web connection
• Fits all ESP designs
The new SIR, the 4th generation of ESP high frequency power supplies from Alstom, improves overall ESP performance without the need for costly mechanical modifications. Alstom’s more than 20 years experience with high performance controllers includes more than 1700 SIR units in operation. Now, operators of large ESPs with 400 mm electrode spacing can benefit from the outstanding capabilities of SIR high frequency power supplies. SIR is the first 120 kW switched technology based power supply on the market. Easily retrofittable into existing T/R systems. The high power conversion efficiency, low weight and ease of operation of this 4th generation SIR power supply offer significant advantages over conventional T/R units. All new SIR power supplies are supplied with integrated ESP rapping control. Remote control and monitoring is easily done with a standard web-capable PC.
EPIC III – ADVANCED ELECTROSTATIC PRECIPITATOR INTEGRATED CONTROLLER EPIC III, a single-board computer mounted in a robust steel enclosure, provides optimum control of HV rectifiers and rapping systems. All EPIC III units in a network communicate via Ethernet and share information in real time. To facilitate modernization of ESP control systems, retrofit kits allow quick and easy upgrades, giving your old ESP all the benefits of the advanced EPIC III system without the need to replace the T/R units or cabinetry.
EPIC III BENEFITS:
• Reduced emissions • Reduced energy consumption
Each EPIC III is equipped with three complementary software packages:
• Extended ESP service life
EPOQ – automatically optimizes the ESP’s collection efficiency.
• Remote control
OpOpt – reduces energy consumption by automatically tuning operating parameters, based upon an opacity related signal.
and monitoring via ethernet
PCR – allows extremely advanced optimization of the rapping sequence by adjusting the T/R power levels during the rapping cycles.
• Fits all ESP designs
ESP - ELECTROSTATIC PRECIPITATOR
143302_Segmark 15
15
6/16/09 11:18:59 AM
Electronic Systems - Logistics EPIC System Replacement Parts EPIC II CONTROLLERS
Part No.
EPIC II CONTROLLER
V4550220-EN
EPIC II CONTROLLER REPAIR
V45502200100R
EPIC II FLAKTBUS GATEWAY REPAIR
V45502350002R
EPIC III CONTROLLERS
Part No.
EPIC III T/R CONTROLLER (ETHERNET COMPATIBLE)
E3-E-EN-EN
EPIC III (FLAKTBUS COMPATIBLE)
V45598660100
SIR Replacement Parts
16
SIR A PARTS
Part No.
HIGH VOLTAGE UNIT 70KV/400MA480VAC
SIRA-S1-4
CONVERTER UNIT
SIRA-S2-2
CONVERTER UNIT REPAIR
SIRA-S2-2R
SIR E PARTS
Part No.
HIGH VOLTAGE UNIT 70KV/800MA
SIRE-S1-11
HIGH VOLTAGE UNIT 60KV/1000MA
SIRE-S1-14
HIGH VOLTAGE UNIT 70KV/400MA
SIRE-S1-2
HIGH VOLTAGE UNIT 80KV/250MA
SIRE-S1-3
CONVERTER UNIT 70KV/800MA
SIRE-S2-2
CONVERTER UNIT 70KV/400MA CONVERTER UNIT 60KV/1000MA
SIRE-S2-4 SIRE-S2-7
CONTROL UNIT 800/1000MA
SIRE-S3-1
CONTROL UNIT 250/400MA
SIRE-S3-2
SIR 4 PARTS
Part No.
HIGH VOLTAGE UNIT 480V 70KV/1700MA
SIR4-S1-2-4
HIGH VOLTAGE UNIT 480V 100KV/1200MA
SIR4-S1-2-5
POWER ELECTRONICS 480V-60HZ CONTROLLER UNIT (FLAKTBUS)
SIR4-S2-2 SIR4-S3-4-1-2
ESP - ELECTROSTATIC PRECIPITATOR
143302_Segmark 16
6/16/09 11:19:00 AM
NOTES
ESP - ELECTROSTATIC PRECIPITATOR
143302_Segmark 17
17
6/16/09 11:19:00 AM
Particulate Innovation Fabric Filtration
OPTIMIZE YOUR BAGHOUSE PERFORMANCE As the world’s leading environmental service provider, Alstom can help you reduce the operating costs of your baghouse.
Particulate Management Solutions YESTERDAY’S BAGHOUSE MAINTENANCE WILL NOT KEEP YOU OPERATING EFFICIENTLY | Traditionally the baghouse has been seen as a cost center that must be maintained through bag replacements. This approach is minimizing the opportunity to reduce costs through system optimization. Alstom reviews your system’s total operating conditions; and then applies industry-leading technologies to optimize the performance and reduce the lifecycle costs of this critical component.
In addition, Alstom brings to bear its best in class technology, innovation, logistics and experience to optimize the performance of this critical environmental system. From bag management solutions to strategic design reviews, Alstom is your partner for optimum baghouse performance.
Filter bags and bag cages
(OPTIPOW®, OPTIPULSE™) Cleaning valves
CAPABILITIES:
• REMOTE FF MONITORING | Tuning | Trending | Bag status | Performance | Process | Failures
• AERODYNAMIC DESIGN REVIEW | Dampers | Guide vanes | Fans | Ducting
• BAG MANAGEMENT | Sourcing | Removal | Installation | Disposal | Life extension
• ON SITE INSPECTIONS | Process | Electrical | Mechanical | Insulation/leakages
18
• PROPRIETARY PULSE VALVE DESIGN • OPERATION OPTIMIZATION | Operation cost | Compressed air | Additives
• UPGRADE | Mechanical | Electrical | Control
• OPTIMIZED BAG MATERIALS • L AB ANALYSIS OF FILTER MEDIA
FF - FABRIC FILTRATION
143302_Segmark 18
6/16/09 11:19:00 AM
Fabric Filtration - Technology and Logistics Baghouse Internals The inside of your baghouse is a harsh environment. You want to ensure the components work right, every time. Alstom filter bag options and pulse valve upgrades offer cutting edge technologies for your performance needs.
FILTER MEDIA:
• Felts: PPS, Aramid • Fiberglass • ePTFE membrane through exclusive agreement with Gore® filtration products for the utility marketplace (page 22)
The filter bag is the “heart” of your baghouse. As the most critical component to ensuring your successful operation, Alstom is poised to offer a variety of options to meet your filtration needs. Filter bag selection requires careful planning and review with a team that is qualified to understand your system’s performance operations. At Alstom we are not just providing bags, we will work with you to tailor your filter options to optimize cost, performance, and life.
• Intrinsic coatings • Bags and cages UPGRADED P ULSE VALVES : OPTIPOW® P ULSE VALVE Alstom’s latest technology for cleaning air flow control is the OPTIPOW Pulse Valve. Designed to eliminate harsh pulses which reduce your filter bag life, the OPTIPOW Pulse Valve provides 3-phase cleaning which unlike conventional pulsing systems, creates a “deep” bulge-pulse which travels the length of the bag. This allows for longer bags and more effective cleaning solutions. Additionally, the 3-phase pulsing gives a “modulated” return to filtering mode which reduces the snap-back pulse on the bag.
BENEFITS:
• Increased bag life • Lower dust emissions
• Lower compressed air consumption
• Lower pressure drop
• Lower additive consumption
FF - FABRIC FILTRATION
143302_Segmark 19
19
6/18/09 12:45:02 PM
Fabric Filtration - Innovation and Technology Fabric Filter Controls BENEFITS:
EFFIC™ – ADVANCED CONTROLS FOR FABRIC FILTRATION SYSTEMS
• Lower energy costs • Extended bag life • Lower maintenance
EFFIC IS A GROUND-BREAKING TECHNOLOGY | that provides improved emissions control and lower operating and maintenance costs to power plant fabric filtration system users. Our EFFIC controller is a cost-effective, flexible solution designed to replace and modernize control systems in most existing fabric filtration systems which use compressed air for pulse cleaning.
costs
• Lower absorbents costs • Optimal dust thickness • Lower operating costs INCORPORATED WITH THE EFFIC, ALSTOM PROVIDES COMPREHENSIVE BAGHOUSE CLEANING CONTROL AND DIAGNOSTIC INFORMATION. | Integrating EFFIC with Alstom’s Particulate Management System provides the increased flexibility to get this highly strategic information where you need it. Ethernet IP, Ethernet TCP, Modbus RTU, Profibus, DeviceNet, CanOPEN and CanBUS communications are all available so you can utilize your plant’s standard communication protocol.
OPTIMIZED EMISSION CONTROL EFFIC optimizes fabric filter cleaning by varying the cycle time, length and pressure of the compressed air cleaning pulse, calibrated to reduce pressure drop. In addition, EFFIC controls the thickness of the dust layer on fabric filter bags so that dust and absorbents (such as lime or active carbon) provide maximum collection efficiency – even when there are variations in the power plant’s gas flow. At the same time, EFFIC helps avoid overdosing with absorbents, helping to reduce operating costs.
REDUCED MAINTENANCE COSTS EFFIC can extend bag life by up to 25% by optimizing cleaning cycles, thus reducing wear and tear. In conjunction with a dust meter, EFFIC can rapidly detect and identify leaking filter bags. In addition, during each cleaning cycle, EFFIC also checks all cleaning valves (electrically and mechanically) to detect faults. All bag and valve faults are identified to allow immediate remedial action, saving maintenance costs and reducing fabric filter service times and production downtime. Through the use of ProMo III® software, EFFIC can take readings and perform diagnostic tests on fabric filters remotely, providing analysis and real-time pictures of the condition of the filters. This allows operators to estimate remaining bag life and plan maintenance shutdowns.
20
FF - FABRIC FILTRATION
143302_Segmark 20
6/18/09 3:32:05 PM
Fabric Filtration - Innovation and Technology Particulate Monitoring Solutions Reliable Passive Sensors with Protected Probe Technology
BENEFITS:
• Monitor system performance
Industrial Grade Systems Designed for Harsh Environments
• Active maintenance ability
• Maximize operational control
• Easy installation and configuration
ALSTOM HAS PARTNERED WITH FILTERSENSE | a leading instrument ONE OF THE MOST ADVANCED SYSTEMS AVAILABLE TODAY FOR RELIABLE AND ACCURATE BAGHOUSE PARTICULATE MONITORING AND VISUALIZATION |
manufacturer for
Alstom’s particulate monitoring system consists of particulate sensors and high-
systems, to provide a
performance monitoring technology. All are designed for long life and minimal maintenance
comprehensive line of
in the harsh environment found in power plant baghouses.
particulate monitoring
Induction Sensing
particulate monitoring
The sensors provide highly
solutions specifically
accurate, reliable indicators of
designed for the unique
the relative particulate levels
requirements of the power
inside your baghouse. Alstom’s
industry.
particulate monitoring systems are designed to provide you the information you need to get the best performance from your baghouse.
™ Configured for Alstom and the Power Industry
FF - FABRIC FILTRATION
143302_Segmark 21
21
6/18/09 12:45:05 PM
Fabric Filtration - Innovation and Technology ePTFE Membrane Filter Bags SURFACE FILTRATION FOR THE HIGHEST FILTRATION EFFICIENCY BENEFITS:
• Longer bag life • Lower emissions • Lower pressure drop • Better gas throughput • Reduced ID fan load • Power Savings
MEMBRANE FILTRATION SYSTEMS | configured by Gore® for Alstom and the power industry, use expanded polytetraflouroethylene (ePTFE) technology to provide the highest filtration efficiency and energy savings potential available today. Membrane filtration systems trap dust at the surface, allowing particulate capture down to sub-micron sizes. Conventional (non-membrane) depth filters allow particles to pass through the filter media, creating internal dust cake buildup, reducing filter “cleanability” and life, increasing pressure drop.
Seam sealing available for maximum efficiency and minimum cross contamination
Re-enforcing cuffs to increase bag life
Double Layer bottom for increased durability
ADVANCED FILTER CONSTRUCTION FOR BETTER FIT & LONGER LIFE | Our filters are built using a precision construction process that utilizes high quality stitching and seams. Typical features include reinforced cuffs and engineered backing materials.
ALSTOM EXPERTISE + GORE TECHNOLOGY = BETTER FIT AND LONGER LIFE
High quality stitching and seam design minimize leakage
Snapbands sized to provide best fi t in the industry
GORE membrane for filtration efficiency, consistent gas flow, and dust cake release
Enginered backing materials for longer mechanical durability
22
FF - FABRIC FILTRATION
143302_Segmark 22
6/16/09 11:19:03 AM
Fabric Filtration - Logistics
Replacement Parts 6
5
9
2 3 4 8 7 [1]
Cleaning Valves - OPTIPOW 105 Description
Part No.
Item No.
OPTIPOW 105 (24 VDC )
V1617803-0100
[1]
OPTIPOW 105 (110V 60 Hz, 100V 50/60Hz)
V1617803-0200
[1]
OPTIPOW 105 (110V, 50 Hz)
V1617803-0300
[1]
OPTIPOW 105 (110V 50Hz, 120V 60Hz)
V1617803-0400
[1]
OPTIPOW 105 (220V, 50 Hz)
V1617803-0500
[1]
OPTIPOW 105 (UR-CERTIFIED 120V,60HZ)
V1617803-0600
[1]
OPTIPOW 105 (without solenoid, revolving 90° C)
V1617803-0800
-
Coupling set
V3592382-0000
-
Membrane
V4549902-0100
(2)
O-Ring (Fluor rubber 64,5 x 3)
8003-5573
(3)
O-Ring (Nitril 70SH 64,5 x 3)
2136-1422
(3)
O-Ring (114,5 x 3)
2136-1435
(4)
Pilot cover
V3630501-0100
(5)
Plate
V3630524-0100
(6)
Plunger
V3630527-0100
(7)
Round washer (SS3576-10-200HV FE/ZN45 Erection details)
4903-2173
Rubber disc
V3630530-0100
(8)
Rubber disc
V3640661-0100
(8)
Screw (ISO4762-M10x30-8.8 ZN8C, Erection details)
2034-2495
Solenoid valve (24 V DC)
V3611471-0100
(9)
Solenoid valve (100 V, 60 Hz)
V3611471-0201
(9)
Solenoid valve (110 V, 50 Hz)
V3611471-0300
(9)
Solenoid valve (110 V, 60 Hz)
V3611471-0200
(9)
Solenoid valve (120 V, 60 Hz)
V3611471-0400
(9)
Solenoid valve (120 V, 60 Hz - UL certified)
V3640645-0200
(9)
Solenoid valve (230 V, 50 Hz)
V3611471-0500
(9)
-
-
FF - FABRIC FILTRATION
143302_Segmark 23
23
6/16/09 11:19:06 AM
Fabric Filtration - Logistics
Replacement Parts 6
5
9
2 3 4 8 7 [1]
Cleaning Valves - OPTIPOW 135
24
Description
Part No.
Item No.
OPTIPOW 135 (24V)
V1614718-0100
[1]
OPTIPOW 135 (100V, 50 Hz)
V1614718-0301
[1]
OPTIPOW 135 (120V 60Hz)
V1614718-0400
[1]
OPTIPOW 135 (120V 60Hz UL-CERTIFIED)
V1614718-0700
[1]
OPTIPOW 135 (without solenoid, revolving 90° C)
V1614718-0800
-
Membrane
V4549902-0100
(2)
O-Ring (Fluor rubber 64,5 x 3)
8003-5573
(3)
O-Ring (Nitril 70SH 64,5 x 3)
2136-1422
(3)
O-Ring (114,5x3)
2136-1441
(4)
Pilot cover
V3630501-0100
(5)
Plate
V3630524-0100
(6)
Plunger
V3629022-0100
(7)
Round washer (SS3576-5-200HV FE/ZN25)
4903-2146
Rubber disc
V3640660-0100
(8)
Solenoid valve (24 V DC )
V3611471-0100
(9)
Solenoid valve (100 V, 60 Hz)
V3611471-0201
(9)
Solenoid valve (110 V, 50 Hz)
V3611471-0300
(9)
Solenoid valve (110 V, 60 Hz)
V3611471-0200
(9)
Solenoid valve (120 V, 60 Hz)
V3611471-0400
(9)
Solenoid valve (120 V,60 Hz-UL CERTIFIED)
V3640645-0200
(9)
Solenoid valve (230 V, 50 Hz)
V3611471-0500
(9)
-
FF - FABRIC FILTRATION
143302_Segmark 24
6/16/09 11:19:07 AM
Fabric Filtration - Logistics Replacement Parts
Valve housing
[1]
[1]
Valve seat
Cleaning Valves - OPTIPULSE Pulse Valve Description
Part No.
Item No.
Cleaning valve (90° C -24 VDC, with valve seat)
V2549810-0300
[1]
Cleaning valve (130° C -24 VDC, with valve seat)
V2549810-0400
[1]
Cleaning valve (LGMB)
V2551491-0400
[1]
Cleaning valve (90° C -24 VDC, without valve seat, LKHF)
V2556451-0100
[1]
Cleaning valve (110 V/60 Hz, without valve seat, LKHF)
V2556451-0102
[1]
Cleaning valve (220 V/50 Hz, without valve seat, LKHF)
V2556451-0105
[1]
Cleaning valve (without solenoid and valve seat, LKHF)
V2556451-0200
-
Cleaning valve (120° C - 24 VDC, without valve seat, LKHF)
V2556451-0300
[1]
Cleaning valve (110 V/60 Hz, without valve seat, LKHF)
V2556451-0302
[1]
Cleaning valve (high temp., without solenoid and valve seat, LKHF) V2556451-0400
[1]
Spare part kit for V2549810-0300
8003-5558
-
Spare part kit for V2549810-0400
8003-5557
-
Spare part kit for V2556451-0100
8003-5925
-
Spare part kit for V2556451-0300
8003-5926
-
FF - FABRIC FILTRATION
143302_Segmark 25
25
6/16/09 11:19:08 AM
Fabric Filtration - Logistics Replacement Parts Cleaning Valves - OPTIPULSE Pulse Valve
26
Description
Part No.
Item No.
Gasket (Kloroprene 70 shore)
V3552141-0001
-
Gasket
V3566195-0001
-
Gasket
V4534745-0001
(1)
Gasket (Kloroprene)
V4530035-0001
-
Gasket, silicone
V3552141-0002
-
Membrane
V2578363-0300
-
Membrane
V3560168-0100
-
Membrane (90° C)
V3560170-0100
(2)
Membrane (120° C high temp)
V3568985-0100
-
O-Ring (Fluor rubber 89,1 X 5,7)
2136-3519
(3)
O-Ring (Nitril rubber 89,1 X 5,7)
2136-1519
(3)
Pilot cover (cleaning valve LGMB)
V3587195-0001
-
Pilot cover
V3561814-0001
-
Pilot cover
V3557096-0001
(4)
Rubber disc
V4532907-0001
(5)
Solenoid valve (24 V DC)
V3598916-0100
(6)
Solenoid valve (110 V 50 Hz)
V3598916-0300
(6)
Solenoid valve (110 V 60 Hz)
V3598916-0200
(6)
Solenoid valve (120 VDC)
V3598916-0800
(6)
Solenoid valve (220 V 60 Hz)
V3598916-0700
(6)
Solenoid valve (230 V 50 Hz)
V3598916-0500
(6)
Solenoid valve (240 V 50 Hz)
V3598916-0600
(6)
Spiral
V4534773-0001
(7)
Valve cover
V2549808-0001
(8)
Valve seat
V2541785-0001
(9)
Washer (18 x 10,2X 1,5 Klingersil C 4400)
8000-8417
6 4
8 5 2 7 1
3
9
-
FF - FABRIC FILTRATION
143302_Segmark 26
6/18/09 12:45:23 PM
NOTES
FF - FABRIC FILTRATION
143302_Segmark 27
27
6/16/09 11:19:09 AM
Gaseous Solutions - Innovation Selective Catalytic Reduction (SCR) K-Max Replacement Catalyst BENEFITS: ™
• Highest density • Reduced life cycle cost • Reduced SO2 – SO3 oxidation
• Effective, flexible NOx reduction
• High wear • High durability UNIQUE GEOMETRIC SHAPE | The unique geometric triangular shape of the K-Max catalyst offers the benefits of both plate and honeycomb design. With a 7 mm height and 11 mm pitch, K-Max catalyst provides 2.5 mm more void space — and the highest volumetric density and surface ratio of any other SCR catalyst. Because the corner of each triangular cell is anchored to its neighboring cells, the catalyst has the added strength to operate successfully in the harsh operating environment of the commercial SCR…without increased plugging and blocking.
28
PITCH: 11mm
HEIGHT : 7mm
SCR
143302_Segmark 28
6/18/09 12:45:24 PM
Gaseous Solutions - Innovation K-Max Replacement Catalyst THE EXCEPTIONAL PERFORMANCE
BETTER EFFICIENCY-optimized solutions
CHARACTERISTICS OF THE K-MAX CATALYST |
The high density of the K-Max catalyst offers operators equal performance with less catalyst.
offer operators a unique flexibility to manage life cycle costs and performance. When compared with competitive systems, a reduced amount of K-Max catalyst offers equal environmental performance
Alstom allows operators to optimize their solutions, choosing more emissions control or less life cycle
21 x 21 cell honeycomb
6mm Plate
Pitch
(mm)
11
7.0
5.7
Height
(mm)
7
7.0
-
Density
(m2m3)
640
(assumed)
(assumed)
1.49
1.17
1.0
0.67
0.85
1.0
and lower pressure drop. Taken together, the low weight and high density of the K-Max catalyst from
K-Max
Ratio of Density Required Cat. Volume
(m3)
505
430
cost, depending upon their needs.
REDUCED WALL THICKNESS | At .4 mm, the K-Max catalyst features the thinnest wall thickness available today for reduced SO2 to SO3 conversion, which leads to less corrosion and longer catalyst life. Since SO2 occurs in the depth of the catalyst, K-Max, with its homogeneous thin-wall shape significantly reduces SO2 oxidation while maintaining NOx reduction efficiency.
The bottom line: thin walls = better performance, lower emissions.
K-Max EDGE- AND SURFACE-HARDENED CONSTRUCTION | protects K-Max catalyst against thermal shock and transport damage. Typical THERMAL/TRANSPORT CRACKS
competitive catalysts are extruded, then surfacehardened for protection. The K-Max catalyst is completely homogeneous, built on a glass-fiber substrate with the vanadium catalyst completely dispersed throughout the structure. Because the K-Max catalyst is hardened throughout, it is completely “flex-able”; that is, it is not susceptible to thermal shock or transportation cracks.
Others SCR
143302_Segmark 29
29
6/16/09 11:19:12 AM
Gaseous Solutions - Innovation Wet Flue Gas Desulfurization - WFGD Innovative Upgrades UPGRADES:
• Performance
WITH PRESSURE TO CONFORM | to today’s increasing compliance requirements, your ability to keep operating costs down can become difficult. Alstom is committed to finding innovative solutions to Wet FGD system upgrades to keep your removals high and your costs low. As every plant’s Wet FGD system is
enhancing plates
unique, Alstom takes a tailored approach to
• HV mist eliminator
determining what solutions you need. We
designs
• Spray header optimizations
bring a full array of engineering to the table to ensure that your solution meets your expectations for high performance.
• Tray upgrades/ conversions
• Forced oxidation conversions
BENEFITS:
• Eliminate reliance on dibasic acid
• Increase SO2 removal efficiency
• Reduce power consumption
• Reduce inlet duct solid buildup
• Improve mist eliminator efficiency
• Reduce manual cleaning frequency
30
TRAY UPGRADES | A main point to consider when evaluating your system’s performance is gas-to-liquid contact. Alstom’s new tray design helps achieve optimal contact rates by maximizing the incoming gas distribution.
WFGD
143302_Segmark 30
6/18/09 12:45:55 PM
Wet FGD Logistics and Technology A Full Array of Products ALSTOM IS CAPABLE | of providing you competitive Wet FGD components for your replacement needs including:
HEADERS — Replacement or upgrade spray headers — Improved spray coverage by optimizing spray nozzles, design and pattern configuration — Reduce recycle pump head
NOZZLES — Dual or single orifice — Tangential right angle — Max free passage 2.25"
MIST ELIMINATORS — High breakthrough velocity 18.5"
PUMPS & VALVES LIME PREPARATION EQUIPMENT
— Low pressure drop — Improved on-line cleaning — Available in FRP & polysulfone plastic
WFGD
143302_Segmark 31
31
6/18/09 12:45:57 PM
Gaseous Solutions - Technology Dry Flue Gas Desulfurization-DFGD
ADVANTAGES OF SDA PROCESS:
• 95% of acid gasses
and most trade metals collected
• Operational reliability • Low operating costs • Low power consumption
• No exotic materials or linings needed
• Dry waste products for ease of disposal
• Improved process control
• On-line replacement atomizers for easy maintenance
• No flue gas reheating = improved thermal operating efficiency
PROVEN PERFORMANCE | With over 100 years experience in global air pollution control technology, Alstom is the only company known to offer both Spray Dryer Absorber and Flash Dryer Absorber DFGD systems. Over 6,000 MW of Alstom DFGD systems are in operation around the world. Efficient absorption of sulfur dioxide in the dry scrubber depends upon proper reagent selection and preparation, atomization, flue gas distribution and mixing. Alstom brings exceptional expertise and extensive experience to each of these areas.
REAGENT PREPARATION Properly selected reagent preparation equipment matched to each application includes slakers, grinding mills, reaction tanks, pumps, conveying blowers and silos. Alstom’s technology and replacement parts are designed to provide maximum efficiency and low cost.
FLUE GAS DISTRIBUTION AND MIXING Alstom’s proprietary computer programs and flow models have resulted in innovative designs that help achieve optimum spray contact with the flue gas. These designs have been proven in 6,000 MW of applications.
HIGH EFFICIENCY Alstom’s modern dry scrubber designs can achieve SO2 removal efficiency of 95% or higher. Emission rates of less than 10 ppm of SO2 can be met based upon design constraints. DFGD systems are available for fuels of any sulfur content or heat value.
32
DFGD
143302_Segmark 32
6/16/09 11:19:31 AM
Gaseous Solutions - Technology
Flexible Shaft Atomizer Rebuilds AS A LEADING SUPPLIER OF HIGHLY SPECIALIZED ATOMIZER EQUIPMENT AND REPLACEMENT PARTS, ALSTOM | offers one of the industry’s most complete and cost-effective
BENEFITS:
Spray Machine Flexible Shaft Atomizer Rebuild Services, including inspection, detailed report,
• Saves 50% of
maintenance, and spin test. These offerings help you achieve longer lasting DFGD systems that reduce acquisition and operating costs.
replacement cost
• Saves 20 – 30 hours
All work is done in a controlled environment, using the latest technology. Our proven processes and extensive parts inventory assures fast turn times, and that all components are rebuilt to our strict tolerances.
of labor
• One year new equipment warranty backed by Alstom’s industry-leading engineering and manufacturing expertise
THE BASIC MAINTENANCE PROGRAM INCLUDES:
• Disassembly, inspection and parts assessment • OEM replacement parts • Cleaning • Painting • Re-assembly and testing
• Diagnostic spin test
When the equipment is received, a serial number is assigned and an inspection is performed that includes a detailed inspection report. The report is sent to the client along with an inspection
to ensure optimum operating condition
• Available 7 days a week
estimate that details the parts that will need replacement. After the client’s approval, the rebuild is completed within the required timeframe. Also, a spin test is performed on both “as-received” equipment before evaluation, and “after rebuild”, prior to returning to the operator. The spin test checks for vibration, upper and lower motor RTD temperatures, oil temperatures and motor winding temperatures. It also checks supply oil pressures, both before and after the filter, and gearbox to filter and from filter back to gearbox. Alstom also offers R3 (Rebuild, Restock, Replace) component rotation programs to fit your outage schedule and Long Term Service Agreements to meet your specific maintenance
REBUILD OPTIONS AVAILABLE:
• Entire machine • Flex shaft/gearbox assembly
• Flex shaft assembly • Gearbox • Motor
requirements. DFGD
143302_Segmark 33
33
6/18/09 12:46:05 PM
Gaseous Solutions - Logistics Flexible Shaft Atomizer Replacement Parts
Lubrication Rack pg 40
Oil Manifold Assembly pg 40
Motor/Oil Pump Assembly pg 40
Atomizer Disk Assemblies (Single/Dual Feed)
pg 36 and 38
Scroll Plate Assemblies (Single/Dual Feed)
Flex Shaft Atomizer Assemblies (Single/Dual Feed)
pg 35
pg 37 and 39
34
DFGD
143302_Segmark 34
6/16/09 11:19:42 AM
Gaseous Solutions - Logistics
DFGD Flex Shaft Atomizer Assemblies
PRODUCT LINE/FLEX SHAFT SPRAY MACHINE FLEX SHAFT ASSEMBLY SINGLE/DUAL FEED Item #
Description FLEX SHAFT ASSEMBLY - SINGLE FEED FLEX SHAFT ASSEMBLY - DUAL FEED
Part No. 256-101-01 256-101-01A
QTY 1 1
DFGD
143302_Segmark 35
35
6/18/09 12:46:21 PM
Gaseous Solutions - Logistics DFGD Atomizer Disk Assemblies -Single Feed
PRODUCT LINE/FLEX SHAFT SPRAY MACHINE SINGLE FEED ATOMIZER DISK
Item #
Description ATOMIZER DISK ASSEMBLY
03 02 05 06 14 10 07 08 09 12 13 15 16 17 21 22 25 *13
36
INSERT RING SUB-ASSEMBLY BUSHING/NOZZLE SUB-ASSEMBLY ATOMIZER DISK NOZZLE ATOMIZER DISK COVER O-RING ATOMIZER DISK INSERT RING ATOMIZER DISK SHIELD RING ATOMIZER DISK COVER ATOMIZER DISK HUB COVER WEAR DISK HUB WEAR DISK O-RING O-RING O-RING SCR-SET HEX SOC CUP PT .375 X 62 SCR-SET HEX SOC CUP PT .375 X 50 SCR-CAP HEX SOC HD .375 X 1.250 MATERIAL OPTIONS HUB WEAR DISK (FERRO-TIC)
Part No.
QTY
256-130-01
-
256-130-01 256-130-02A 256-135-01 256-135-03 V00-2551 256-131-01 256-135-02 256-132-01 256-133-01 256-134-02 256-134-01 V00-2552 V00-2553 V00-2554 V00-2555 V00-2556 V00-4013
1 8 1 1 1 1 1 1 1 1 1 2 1 1 4 4 16
256-134-01A
-
DFGD
143302_Segmark 36
6/18/09 12:46:23 PM
Gaseous Solutions - Logistics DFGD Atomizer Scroll Plate Assemblies -Single Feed
PRODUCT LINE/FLEX SHAFT SPRAY MACHINE SINGLE FEED SCROLL PLATE ASSEMBLY Item # 02 03 04 05 06 07
Description SCROLL PLATE ASSEMBLY SCROLL PLT. MANIFOLD SCROLL PLT. ORIFICE PLT. O-RING O-RING O-RING SCR-CAP HEX SOC HD .375 P/N’S FLAGGED WITH * ARE CONTRACT SPECIFIC
Part No.
QTY
256-140-01 256-141-01 * V00-2547 V00-2548 V00-2549 V00-4017
1 1 6 1 1 2
DFGD
143302_Segmark 37
37
6/16/09 11:19:44 AM
Gaseous Solutions - Logistics DFGD Atomizer Disk Assemblies -Dual Feed
PRODUCT LINE/FLEX SHAFT SPRAY MACHINE DUAL FEED ATOMIZER DISK
Item # -
03 02 05 06 14 10 07 08 09 12 *13 15 16 17 21 22 25 *13
38
Description ATOMIZER ASSEMBLY DUAL FEED INSERT RING SUB-ASSEMBLY BUSHING/NOZZLE SUB-ASSEMBLY ATOMIZER DISK NOZZLE ATOMIZER DISK BUSHING O-RING ATOMIZER DISK INSERT RING ATOMIZER DISK SHIELD RING ATOMIZER DISK COVER ATOMIZER DISK HUB COVER WEAR DISK HUB WEAR DISK O-RING O-RING O-RING SCR-SET HEX SOC CUP PT .375X 62 SCR-CAP HEX SOC CUP PT .375X 50 SCR-CAP HEX COS HD .375 X 1.250 MATERIAL OPTIONS HUB WEAR DISK (FERRO-TIC)
Part No.
QTY
256-230-01 256-230-03 256-130-02A 256-135-01 256-135-03 V00-2551 256-231-01 256-135-02 256-232-01 256-233-01 256-134-02 256-134-01 V00-2552 V00-2553 V00-2554 V00-2555 V00-2556 V00-4013
1 12 1 1 1 1 1 1 1 1 1 2 1 1 4 4 24
256-134-01A
-
DFGD
143302_Segmark 38
6/16/09 11:19:45 AM
Gaseous Solutions - Logistics DFGD Scroll Plate Assemblies -Dual Feed
PRODUCT LINE/FLEX SHAFT DUAL FEED SCROLL PLATE ASSEMBLY Item # 02 03 04 05 06 07
Description SCROLL PLATE ASSEMBLY SCROLL PLT. MANIFOLD SCROLL PLT. ORIFICE PLT. O-RING O-RING O-RING SCR-CAP HEX SOC HD .375 P/N’S FLAGGED WITH * ARE CONTRACT SPECIFIC
Part No. 256-240-01 256-241-01 * V00-2547 V00-2548 V00-2549 V00-4017
QTY 1 1 6 1 1 2
DFGD
143302_Segmark 39
39
6/18/09 12:46:26 PM
Gaseous Solutions - Logistics DFGD Motor/ Oil Pump Assembly
Item #
Description
QTY
1
PUMP MOTOR ADAPTER
V00-4044
1
5 HP MOTOR COUPLING OIL PUMP SUPPLY RETURN RETURN OIL RELIEF VALVE ADAPTER COVER PLATE P/N’S FLAGGED WITH * ARE CONTRACT SPECIFIC
* V00-3463 V00-3539 V00-3461 V00-4126
1 1 1 1 2
3 4 5 6
Description LUBE RACK ASSEMBLY
1
OIL COOLER OIL RESERVOIR AIR FILTER AIR REGULATOR FLOW METER OIL FILL PORT FLOW SWITCH TEMPERATURE GAUGE OIL HEATER LEVEL INDICATOR P/N’S FLAGGED WITH * ARE CONTRACT SPECIFIC
DFGD Oil/Manifold Assembly
Part No.
2
-
2 3 4 5 6 7 8 9 10
40
Item #
Item # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
Part No.
QTY
*
-
* * V00-2595 * V00-2598 V00-3528 V00-2599 V00-2611 V00-3524 V00-3525
1 1 1 1 1 1 1 1 1 1
DFGD Lubrication Rack
Description OIL MANIFOLD ASSEMBLY OIL MANIFOLD OIL PRESSURE TRANSDUCER RESIS. TEMPERATURE DETECTOR OIL FILTER SUPPLY OIL PRESSURE GAUGE SUPPLY OIL RELIEF VALVE SUPPLY OIL CHECK VALVE GEARBOX OIL CHECK VALVE GEARBOX OIL PRESSURE GAUGE GEARBOX OIL TEMPERATURE GAUGE HEX HEAD PLUG SWIVEL ADAPTER SWIVEL ADAPTER FILTER NIPPLE STRAIGHT THREAD ADAPTER HEX HEAD PLUG REDUCER BUSHING PHENOLIC LABELS SCREW - PANHEAD #4 THERMOWELL COUPLING NIPPLE P/N’S FLAGGED WITH * ARE CONTRACT SPECIFIC
Part No.
QTY
* 256-151-01 * V00-2734 V00-2718 * V00-2720 V00-2721 V00-2722 V00-2724 V00-2725 V00-2726 V00-2727 V00-2728 V00-2729 V00-2730 V00-2731 V00-2723 256-150-23 V00-2733 V00-5036 V00-5476 V00-5477
1 4 1 2 1 1 1 1 1 1 4 2 6 2 2 2 2 10 20 1 1 1
DFGD
143302_Segmark 40
6/16/09 11:19:46 AM
NOTES
NOTES
143302_Segmark 41
41
6/16/09 11:19:46 AM
NOTES
42
NOTES
143302_Segmark 42
6/16/09 11:19:47 AM
Your 1-Stop Choice for Environmental Services and Parts Call us Toll free: 1.866.257.8664 or Direct: 1.860.285.2100 Press: If you know your party’s 4 digit extension For Shipping and Delivery information To speak with a Customer Service Representative If you would like the company directory If you would like this menu repeated All other calls stay on the line
E-mail:
[email protected] Fax: 1.860.285.3101 We provide 24 hour, 7 days a week emergency service. Our normal office hours are 8:00 am to 4:30 pm EST/EDT. 43
143302_Segmark 43
6/16/09 11:19:47 AM
143302_Segmark 44
PSE/BPROB/ENVSRP09/eng/PSER1/06.09/US/6913 © Alstom 2009. Alstom, the Alstom logo and any alternative version there of are trademarks and service marks of Alstom. The other names mentioned, registered or not, are the property of their respective companies. The technical and other data contained in this document is provided for information only. Alstom reserves the right to revise or change this data at any time without further notice.
Alstom Power Inc. 2000 Day Hill Road Windsor, CT 06095-0500 Tel: 860.285.2100 Fax: 860.285.3101 www.alstom.com
6/16/09 11:19:47 AM