Enterprise Payment Solutions Hardware Troubleshooting
New User Interface HardwareTroubleshooting Guide
© 1999-2014 Jack Henry & Associates, Inc. All rights reserved. Information in this document is subject to change without notice. Printed in the United States of America. No part of this document may be copied, reproduced, stored in a retrieval system, displayed, distributed or transmitted in any form or any means whatsoever (electronic, mechanical or otherwise), including by photocopying or recording for any purpose, without the prior written permission of Jack Henry & Associates, Inc. Making unauthorized copies of this document for any purpose other than your own personal use is a violation of United States copyright laws. Any unauthorized use of Jack Henry & Associates, Inc.’s trademarks and service marks is strictly prohibited. The following marks are registered and unregistered trademarks and service marks of Jack Henry & Associates, Inc.: Enterprise Payment Solutions™; Jack Henry & Associates, Inc.®; ProfitStars®; Remote Deposit Complete™; Remote Deposit Scan™
Other Trademarks Various other trademarks and service marks used or referenced in this document are the property of their respective companies/owners: Microsoft, Windows, Windows NT, Windows Vista, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mactinosh is a registered trademark of Apple Inc. Adobe and Acrobat Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Canon USA trademarks, logos, and service marks and those trademarks, logos, and service marks licensed to Canon USA by Canon Inc. including but not limited to the Canon logo, are registered and unregistered marks of Canon USA or Canon Inc. Digital Check trademarks, logos, and service marks are registered marks of Digital Check and Digital Check Corp. EPSON is a registered trademark of Seiko Epson Corporation. RDM, the RDM logo, EC6000i, EC7000i, and ITMS are trademarks of RDM Corporation. Panini is a registered trademark of Panini S.p.A. Unisys trademarks, logos, and service marks are registered marks of the Unisys Corporation.
Contents System Requirements ................................................................................................................ 3 Other Supported Scanners ............................................................................................. 4 Confirming Your System Administrator Privileges ........................................................... 4 Browser Settings ............................................................................................................ 5 Turning on Compatibility View ............................................................................. 5 Configuring Temporary Internet Files and History Settings ................................. 7 Adding to the Trusted Sites ................................................................................. 8 Scanner Device Control ............................................................................................................17 Device Control Indicators...............................................................................................17 Displaying Status Messages and Alerts .............................................................19 Changing a Scanner ......................................................................................................20 Uninstalling a Scanner...................................................................................................22 Troubleshooting ........................................................................................................................26 Application Will Not Launch ...........................................................................................26 Check Jam ....................................................................................................................29 “Choose A Device Manufacturer” Prompt Appears Every Time .....................................31 Communication Error/Failure .........................................................................................32 Device Error: INVALID_SEND_PRINTER .....................................................................33 Device Error: SAFETY...................................................................................................34 Device Error for Panini VisionX: Compression Error ......................................................35 Error Connecting to Device Control ...............................................................................36 Images With Horizontal Black Lines ..............................................................................37 Verifying Power Options.....................................................................................37 Cleaning Image Cameras ..................................................................................38 Electrical Interference ........................................................................................39 Poor Electrical Circuit .........................................................................................39 New User Interface HardwareTroubleshooting Guide
1
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
Degraded USB Controller or Cable ....................................................................39 Other USB Devices ............................................................................................39 Outdated BIOS/firmware/chipset ........................................................................39 Internet Browser Settings Update Loop .........................................................................39 “Only Secure Content is Displayed” Prompt Keeps Appearing ......................................45 RDC Configuration Error ...............................................................................................47 “Required supported device list not available” Error.......................................................48 Terminal Not Enabled ....................................................................................................49 Terminal Not Set Up ......................................................................................................49 Verifying the Use of a Mac® ...........................................................................................50
New User Interface HardwareTroubleshooting Guide
2
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
System Requirements The following components are required for working with the application(s). For the PC: •
Local Administrative rights.
•
USB port 2.0 or higher.
•
High-speed Internet connection.
For Microsoft® Windows®: •
Windows Vista® (except Starter or Home Basic): Microsoft Internet Explorer® 8 and 9.
•
Windows 7: Microsoft Internet Explorer 8, 9, 10, and 11.
•
Windows 8: Microsoft Internet Explorer 10.
•
Windows 8.1, update 1: Microsoft Internet Explorer 11.
•
.NET Framework 4.0 or higher.
The following scanners support this application’s features. Scanner
Model Supported
®
®
Panini
I:Deal
WI: Deal My Vision X Vision X Digital Check
®
CX30 TS230 TS240
®
RDM
EC7000i EC7500i ®
Epson
Unisys Burroughs
Capture One TMS 1000 ®
Micro EX Pro ®
SmartSource Professional Elite SmartSource Merchant Elite Value
New User Interface HardwareTroubleshooting Guide
3
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
Other Supported Scanners For a complete list of supported scanners, please refer to the EPS Remote Deposit Hardware (New UI) Compatibility List document on the Downloads page of the Partner Portal.
Confirming Your System Administrator Privileges A user needs the necessary privileges to install the hardware. Follow the steps below to determine whether a particular user has system administrator privileges. 1. From your computer desktop, click the Start button. Right-click (My) Computer and select Manage.
FIGURE 1 - MANAGE OPTION UNDER COMPUTER IN THE START MENU
2. The Computer Management window displays. Under Local Users and Groups, select the Groups folder. 3. Right-click Administrators and select Properties.
New User Interface HardwareTroubleshooting Guide
4
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 2 - PROPERTIES OPTION FOR ADMINISTRATOR PRIVILEGES
4. The Administrators Properties window displays. If the account a person uses to log in to the computer is not displayed under the Members field, that user does not have administrative privileges.
FIGURE 3 - USERS WITH ADMINISTRATIVE PRIVILEGES
Browser Settings Turning on Compatibility View Adding the EPS URL to the Compatibility View Settings feature of Internet Explorer may help with viewing certain features in the application. 1. Open Internet Explorer. From the top navigational menu, select Tools | Compatibility View Settings.
New User Interface HardwareTroubleshooting Guide
5
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 4 - COMPATIBILITY VIEW SETTINGS
2. The Compatibility View Settings window appears. Within the Add this website field provided, enter selectpayment.com and select Add.
FIGURE 5 - ADD OPTION UNDER COMPATIBILITY VIEW SETTINGS
3. Select Close at the bottom of the Compatibility View Settings window. 4. Select OK from the bottom of the Internet Options window.
New User Interface HardwareTroubleshooting Guide
6
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
Configuring Temporary Internet Files and History Settings Configuring these settings can keep the pages in the system consistently refreshed with information. 1. Open Internet Explorer. From the top navigational menu, select Tools | Internet Options. 2. From the tabs at the top of the Internet Options window, select General.
FIGURE 6 - GENERAL TAB FOR INTERNET OPTIONS
3. Under the Browsing history section, select the Settings option.
FIGURE 7 - SETTINGS OPTION UNDER BROWSING HISTORY
4. The Temporary Internet Files and History Settings window appears. Under Check for newer versions of stored pages, select the Every time I visit the webpage option.
New User Interface HardwareTroubleshooting Guide
7
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 8 - TEMPORARY INTERNET FILES AND HISTORY SETTINGS
5. Select OK at the bottom of the Temporary Internet Files and History Settings window. 6. Select OK from the bottom of the Internet Options window.
Adding to the Trusted Sites A user will need to ensure that the Merchant Portal URL is added to the Trusted Sites option in Internet Settings. Use the following steps to add the website to your Trusted Sites. 1. Open Internet Explorer. From the top navigational menu, select Tools | Internet Options.
New User Interface HardwareTroubleshooting Guide
8
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 9 - INTERNET OPTIONS
2. From the tabs at the top of the Internet Options window, select Security.
FIGURE 10 - SECURITY TAB UNDER INTERNET OPTIONS
3. Select the Trusted Sites icon to activate the Sites option. Select Sites.
FIGURE 11 - SITES OPTION UNDER TRUSTED SITES CATEGORY
New User Interface HardwareTroubleshooting Guide
9
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
4. The Trusted Sites window displays. In the Add this website to the zone field, enter the URL: https://ssl.selectpayment.com and select Add.
FIGURE 12 - ADDING A TRUSTED SITE
5. Select Close at the bottom of the Trusted sites window. 6. In the Internet Options window, with the Trusted sites zone selected, choose the Custom level…option.
FIGURE 13 - CUSTOM LEVEL OPTION
New User Interface HardwareTroubleshooting Guide
10
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
7. In the Security Settings - Trusted Sites Zone window, scroll down to the .NET Framework-reliant components section. Select the Enable option for Run components signed with Authenticode.
FIGURE 14 - ENABLE RUN COMPONENTS SIGNED W ITH AUTHENTICODE
a. (For Internet Explorer 8 only) In the Security Settings - Trusted Sites Zone window, scroll down to the Downloads section. Select the Enable option for Automatic prompting for file downloads.
New User Interface HardwareTroubleshooting Guide
11
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 15 - ENABLE AUTOMATIC PROMPTING FOR FILE DOWNLOADS
8. Scroll down in the Security Settings - Trusted Sites Zone window to the Miscellaneous section. Select the Enable option for Access data sources across domains.
New User Interface HardwareTroubleshooting Guide
12
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 16 - ENABLE ACCESS DATA SOURCES ACROSS DOMAINS
9. Under the same section, select the Enable option for Display mixed content.
FIGURE 17 - DISPLAY MIXED CONTENT
10. Scroll down to the Scripting section. Select the Disable option for Enable XSS filter. New User Interface HardwareTroubleshooting Guide
13
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 18 - DISABLING THE XSS FILTER
11. Select OK from the bottom of the Security Settings – Trusted Sites Zone window. A prompt appears asking you to confirm changes. Select Yes.
FIGURE 19 - PROMPT TO SAVE SETTINGS
Configuring the Pop-Up Blocker 1. From the Internet Options window, select the Privacy tab. 2. Under the Pop-up Blocker section, if the Turn on Pop-up Blocker option is checked, continue with this step. If it is unchecked, proceed to step 3. a. Select the Settings option.
New User Interface HardwareTroubleshooting Guide
14
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 20 - SETTINGS OPTION FOR POP-UP BLOCKER
b.
In the Address of website to allow field, type ssl.selectpayment.com and click Add.
FIGURE 21 - ADDING AN ALLOWED W EBSITE UNDER POP-UP BLOCKER SETTINGS
c. Select Close to return to the Internet Options window.
New User Interface HardwareTroubleshooting Guide
15
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
3. From the bottom of the Internet Options window, select Apply.
FIGURE 22 - APPLYING ADVANCED SETTINGS
4. Select OK to finish.
FIGURE 23 - OK OPTION TO FINISH APPLYING SETTINGS
New User Interface HardwareTroubleshooting Guide
16
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
Scanner Device Control Device Control Indicators The Device Control can be in any one of several statuses. Look to your hidden icons in the task bar of your desktop to view the status of the Device Control. In the following figure, the Device Control icon is yellow, indicating that it is in use.
FIGURE 24 - DEVICE CONTROL ICON
•
A green icon indicates the Device Control services are available.
•
A black icon indicates that the Device Control services are offline.
•
A red icon indicates that an error has occurred with the Device Control.
1. Select the Device Control icon to bring up the Device Control Information window.
FIGURE 25 - DEVICE CONTROL INFORMATION W INDOW
New User Interface HardwareTroubleshooting Guide
17
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
2. To stop Device Control, select Service | Stop. The Device Control icon and window will appear black.
FIGURE 26 - STOP DEVICE CONTROL SERVICE
FIGURE 27 - DEVICE CONTROL, BLACK
New User Interface HardwareTroubleshooting Guide
18
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
3. Select Navigate To | Information or Navigate To | Diagnostics near the top corner of the Device Control to see more about either the scanner settings or other information.
FIGURE 28 - NAVIGATE TO OPTION
Displaying Status Messages and Alerts Use the following steps to limit the amount of alerts and status messages received from Device Control. 1. On the bottom task bar, select the Show hidden icons option.
FIGURE 29 - SHOW HIDDEN ICONS OPTION
2. Right-click the Device Control icon and select Options | Display Alert Balloons. The option should now be deselected (no checkmark next to the option).
New User Interface HardwareTroubleshooting Guide
19
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 30 - DISPLAY ALERT BALLOONS OPTION, SELECTED
FIGURE 31 - DISPLAY ALERT BALLOONS, DESELECTED
Changing a Scanner To select a different scanner with the Device Control, follow the steps below. 1. From the Device Control Information window, select Service | Stop.
New User Interface HardwareTroubleshooting Guide
20
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 32 - STOP DEVICE CONTROL SERVICE
2. Select Device | Chooser.
FIGURE 33 - DEVICE | CHOOSER OPTION
3. The Choose a Device Manufacturer window displays. Select a manufacturer for the scanner you wish to utilize. You may also opt to select a particular model.
New User Interface HardwareTroubleshooting Guide
21
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 34 - SELECTING A NEW SCANNER AND MODEL
4. If the scanner and model you selected has not yet been installed, the system will display an indicator, Not Installed! You have the option of installing this scanner if applicable.
FIGURE 35 - SELECTED DEVICE NOT INSTALLED
Uninstalling a Scanner Use the following steps to uninstall a scanner once you have Device Control installed. 1. In the Device Control window under the Choose a Device Manufacturer heading, select the Uninstall option.
New User Interface HardwareTroubleshooting Guide
22
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 36 - UNINSTALL OPTION
2. The Add/Remove Devices page displays. Choose the scanner to uninstall, and select Uninstall.
FIGURE 37 - SELECTING A SCANNER WITH UNINSTALL OPTION
3. The Uninstall Wizard initiates. Complete the instructions, and select Next to continue.
New User Interface HardwareTroubleshooting Guide
23
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 38 - UNINSTALL W IZARD WITH NEXT OPTION
4. The installer information for the scanner appears. Select Next to continue.
FIGURE 39 - UNINSTALL W IZARD WITH INSTALLER INFORMATION
5. The uninstallation process will complete. Select Next to continue.
New User Interface HardwareTroubleshooting Guide
24
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 40 - UNINSTALL COMPLETE PROMPT
6. Once the process is complete, select Finish. The scanner you selected will now be uninstalled.
New User Interface HardwareTroubleshooting Guide
25
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
Troubleshooting Application Will Not Launch
FIGURE 41 - APPLICATION CANNOT START
1. Select OK, and restart your computer. NOTE: The user performing these tasks will need Administrator privileges. 2. From the Start menu, select Control Panel.
FIGURE 42 - CONTROL PANEL OPTION, W INDOWS 7
3. From the Control Panel’s list of items, select Programs and Features.
New User Interface HardwareTroubleshooting Guide
26
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 43 - PROGRAMS AND FEATURES
4. From the Programs and Features window, select the EPS Device Control application and select the Uninstall/Change option.
FIGURE 44 - UNINSTALLING EPS DEVICE CONTROL New User Interface HardwareTroubleshooting Guide
27
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
5. Navigate to the URL for the Merchant Portal, and log in. Select the Transactions tab from the top of the page. 6. From the left navigational bar, attempt to launch Device Control by selecting your Remote Deposit option and creating a deposit. During this process, you may receive a prompt to reinstall/launch Device Control.
FIGURE 45 - LAUNCH DEVICE CONTROL PROMPT
NOTE: If after installing Device Control you arrive at this page again, selecting the Launch Device Control option will simply launch the application for you. 7. Select to Install Device Control before creating a deposit.
FIGURE 46 - PROMPT TO INSTALL DEVICE CONTROL
NOTE: If at this time the system displays an error relating to a browser group policy setting, please contact your first line of technical support. 8. The Internet Browser Settings Update window will display. Read the agreement, and select Accept to acknowledge and agree to the terms described.
New User Interface HardwareTroubleshooting Guide
28
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 47 - INTERNET BROWSER SETTINGS UPDATE W INDOW
9. The system will ask you to log out of the Merchant Portal. After logging out of the portal, close all Internet Explorer windows. Select OK to continue, and restart your computer.
FIGURE 48 - PROMPT TO CLOSE ALL INSTANCES OF IE
Check Jam The figures below are errors that display when a check jams during scanning. Remove the check item from the scanner, and retry creating the deposit.
New User Interface HardwareTroubleshooting Guide
29
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 49 - DCC SCANNER ERROR
FIGURE 50 - MVX SCANNER ERROR
FIGURE 51 - EPSON SCANNER ERROR
New User Interface HardwareTroubleshooting Guide
30
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
“Choose A Device Manufacturer” Prompt Appears Every Time If Device Control’s Choose A Device Manufacturer window appears everytime you begin making a deposit, you may need to make alterations to your Internet browsing history options. Placing the URL in your Favorites will also help to reduce the message frequency. 1. Navigate to the Merchant Portal URL, and opt to have this URL saved as one of your favorites. 2. Open an Internet Explorer window, and select Tools | Internet Options. 3. Under the General tab, in the Browsing history section, deselect the checkbox next to Delete browsing history on exit so that this option is disabled.
FIGURE 52 - DISABLING THE DELETE BROWSING HISTORY ON EXIT OPTION
4. Within the Browsing history section, select the Delete…option to view the Delete Browsing History window.
New User Interface HardwareTroubleshooting Guide
31
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 53 - DELETE OPTION
5. The Delete Browsing History window appears. Select the check box next to the Preserve Favorites website data option, so that this option is enabled. To apply this setting, select the Delete option at the bottom of the window. The system will delete any excess browsing history but preserve the Favorites data.
Communication Error/Failure
FIGURE 54 - COMMUNICATION FAILURE
New User Interface HardwareTroubleshooting Guide
32
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
If Device Control cannot communicate with the application, make sure the scanner device is connected and the power is turned on. NOTE: If the scanner was plugged in before the device drivers were installed, you will need to verify the scanner appears correctly in the Device Manager. If the scanner displays a yellow question mark or shows under the Other Devices category as a USB device, right-click the icon and select Update Driver. 1. Log out of the Merchant Portal, close all instances of Internet Explorer, and restart your computer. 2. Once you have restarted the computer, log in to the Merchant Portal, and retry creating the deposit. 3. If the communication error still appears, you will need to restart Device Control. In the bottom right corner of your desktop, select to Show hidden icons.
FIGURE 55 - SHOW HIDDEN ICONS OPTION
4. Right-click the Device Control icon and select Exit Application.
FIGURE 56 - EXIT APPLICATION OPTION
5. Log out of the Merchant Portal, close all instances of Internet Explorer, and restart your computer. Once the computer has restarted, retry creating the deposit.
Device Error: INVALID_SEND_PRINTER If a merchant/member has franking enabled in the Partner Portal but does not have an ink cartridge installed in the scanner, Device Control will display an INVALID_SEND_PRINTER error. Have the merchant/member insert an ink cartridge into the scanner. Alternatively, you can disable the front franking and rear franking for the merchant/member in the Partner Portal.
New User Interface HardwareTroubleshooting Guide
33
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 57 - INVALID SEND PRINTER ERROR
FIGURE 58 - RDC CONFIGURATION OPTIONS, FRANKING
Device Error: SAFETY If the cover of the scanner has been removed or is not properly in place, Device Control displays an alert message, Device Error: SAFETY. Please ensure the cover of the scanner is placed correctly, and retry your deposit.
New User Interface HardwareTroubleshooting Guide
34
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 59 - DEVICE ERROR: SAFETY
Device Error for Panini VisionX: Compression Error A compression error occurs when the scanner is not able to compress the image.
FIGURE 60 - COMPRESSION ERROR
1. Log out of the Merchant Portal. 2. Unplug the scanner from the computer, and instruct the customer/member to clean the contact image sensors (see figure below).
New User Interface HardwareTroubleshooting Guide
35
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 61 - CONTACT IMAGE SENSORS
a. Gently open the front image camera, and remove any debris and dust. b. Clean the contact image sensors with a soft, lint-free cloth dampened with isopropyl alcohol or with eyeglass cleaner. 3. Reassemble the scanner, and connect the scanner to the computer. 4. Log in to the Merchant Portal, and continue scanning.
Error Connecting to Device Control When creating a new deposit, the system may display a service error in the Scanner Interface section and be unable to connect to Device Control (see figure below). Reboot your computer, and retry the deposit.
FIGURE 62 - SCANNER INTERFACE ERROR CONNECTING TO DEVICE CONTROL
New User Interface HardwareTroubleshooting Guide
36
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
Images With Horizontal Black Lines There are a number of potential causes for images that are streaked with horizontal black lines. It is suggested that you implement each of the steps below one at a time in the order presented to resolve the horizontal black lines. NOTE: If after the completion of one of the solutions below images with horizontal black lines persist, you may opt for the next solution listed. Disconnect the scanner’s power and USB cables, and reboot computer before attempting the next solution listed.
Verifying Power Options 1. From your computer’s Control Panel, select Power Options.
FIGURE 63 - POWER OPTIONS
2. In the Power Options window, to the right of your currently active power plan, select Change plan settings.
New User Interface HardwareTroubleshooting Guide
37
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 64 - CHANGE PLAN SETTINGS
3. The Edit Plan Settings window appears. Ensure that the Turn off the display and Put the computer to sleep options are set to Never.
FIGURE 65 - EDIT PLAN SETTINGS SET TO NEVER
Cleaning Image Cameras Streaks may develop on the image caused by a buildup of ink deposits. If a streak develops on the image and running a cleaning card does not remove the streak, remove the inner and outer covers of the scanner. Gently remove the front image camera, and, using an alcohol-saturated snap swab, wipe the glass on both the front and back cameras.
New User Interface HardwareTroubleshooting Guide
38
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 66 - W IPING A CAMERA
Electrical Interference There may be electrical interference from an appliance, such as oscillating fans, a space heater, a CRT-style computer monitor, etc. Move any such appliances at least 18 inches from the scanner.
Poor Electrical Circuit If there is a poor quality electrical circuit, relocate the scanner’s power source to a different electrical outlet.
Degraded USB Controller or Cable Replace the USB cable. You may also use a powered USB hub for your scanner’s USB connection with the computer.
Other USB Devices Other USB devices connected to your computer, such as a laser printer or a 3-in-1 printer. Turn the power to these types of devices off during scanning, as they sometimes interfere with other USB devices (such as the scanner).
Outdated BIOS/firmware/chipset Update your computer’s firmware. Contact your computer manufacturer for assistance.
Internet Browser Settings Update Loop In the upgrade process for the user interface, the Internet Browser Settings Update window may keep prompting you to ensure there are no other instances of Internet Explorer open before you attempt to accept the settings update. At this time you may wish to save any work and close any additional applications in the event your computer needs to be rebooted. 1. If the Internet Browser Settings Update window appears when performing the user interface upgrade, do not close this window (see figure below). Instead, log out from the Merchant Portal, and close all other instances of Internet Explorer. New User Interface HardwareTroubleshooting Guide
39
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 67 - INTERNET BROWSER SETTINGS UPDATE W INDOW
2. Select Accept. If all instances of Internet Explorer have been closed and the system displays the Internet Explorer Instances Detected window, you will need to reboot your computer before continuing the upgrade process. Select OK, and reboot your computer.
FIGURE 68 - INTERNET EXPLORER INSTANCES DETECTED W INDOW
3. If after you have rebooted your computer and the Internet Explorer Instances Detected window still appears, cancel the process, and reboot your computer for a second time. You will need to start EPS Device Control manually by selecting Start | EPS Device Control.
New User Interface HardwareTroubleshooting Guide
40
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 69 - EPS DEVICE CONTROL
FIGURE 70 - EPS DEVICE CONTROL, W INDOWS 8
4. If all instances of Internet Explorer are closed and you still receive the Internet Explorer Instances Detected window, you will need to open the Task Manager window. Rightclick the task bar (this task bar also houses the Start option) and select Task Manager. New User Interface HardwareTroubleshooting Guide
41
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 71 - START TASK MANAGER
a. For Windows 7: In the Windows Task Manager window, select the Processes tab. For all instances of iexplore.exe, right-click each one and select End Process. NOTE: Do not close any instances of explorer.exe; only close instances of iexplore.exe.
New User Interface HardwareTroubleshooting Guide
42
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 72 - W INDOWS 7 PROCESSES TAB IN TASK MANAGER
b. For Windows 8: In the Task Manager window, under the Details tab, right-click each instance of iexplore.exe and select End Task. NOTE: Do not close any instances of explorer.exe; only close instances of iexplore.exe.
New User Interface HardwareTroubleshooting Guide
43
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 73 - W INDOWS 8 TASK MANAGER
5. After you have closed all instances of iexplore.exe, close the Task Manager window. From the Internet Browser Settings Update window, select Accept.
FIGURE 74 - INTERNET BROWSER SETTINGS UPDATE
New User Interface HardwareTroubleshooting Guide
44
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
“Only Secure Content is Displayed” Prompt Keeps Appearing If the Only secure content is displayed prompt repeatedly appears, you may need to allow the display of mixed content within your Internet settings to avoid this prompt and reduce any display errors when making deposits.
FIGURE 75 - ONLY SECURE CONTENT IS DISPLAYED
1. Open an Internet Explorer window, and select Tools | Internet Options. 2. From the top of the Internet Options window, select the Security tab. 3. Select the Trusted sites check mark icon, and choose the Sites option.
FIGURE 76 - SITES OPTION
4. In the Add this website to the zone field, enter the URL: https://ssl.selectpayment.com and select the Add option.
New User Interface HardwareTroubleshooting Guide
45
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 77 - ADDING A W EBSITE TO TRUSTED SITES
5. Select Close to return to the Internet Options window on the Securities tab. From here, select the Custom level… option.
FIGURE 78 - CUSTOM LEVEL OPTION
6. The Security Settings - Internet Zone window appears. Scroll down to the Miscellaneous section. Select the Enable option for Display mixed content.
New User Interface HardwareTroubleshooting Guide
46
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 79 - ENABLE MIXED CONTENT
7. Select OK to return to the Internet Options window. From here, select the Apply option, and then select OK.
RDC Configuration Error When attempting to make a deposit, the following error may appear if the RDC configuration options were not automatically configured. Contact Customer Support to have the configuration settings set manually.
FIGURE 80 - RDC CONFIGURATION ERROR, MERCHANT PORTAL
New User Interface HardwareTroubleshooting Guide
47
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 81 - RDC CONFIGURATION ERROR, PARTNER PORTAL
“Required supported device list not available” Error If the scanner type chosen for the merchant in the Partner Portal is not a compatible scanner, Device Control will not launch, and the user will see a Required supported device list not available error. You will need to log in to the Partner Portal and add a compatible scanner for the merchant.
FIGURE 82 - REQUIRED SUPPORTED DEVICE LIST NOT AVAILABLE New User Interface HardwareTroubleshooting Guide
48
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
Terminal Not Enabled An error describing a scanner terminal as not enabled may indicate that the scanner has been disabled in the Partner Portal. The scanner will need to be re-enabled for processing to continue.
FIGURE 83 - TERMINAL NOT ENABLED ERROR, REMOTE DEPOSIT COMPLETE
FIGURE 84 - TERMINAL NOT ENABLED ERROR, REMOTE DEPOSIT SCAN
Terminal Not Set Up If an error describes a terminal as not set up or invalid, the serial number on the scanner has either not been added in the Partner Portal or the serial number was added twice, resulting in two scanners with the same serial number.
New User Interface HardwareTroubleshooting Guide
49
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 85 - REMOTE DEPOSIT COMPLETE, TERMINAL NOT SET UP
FIGURE 86 - REMOTE DEPOSIT SCAN, TERMINAL INVALID
Verifying the Use of a Mac® 1. Press and hold the Windows key on your keyboard, and press the R key. 2. The Run window appears. In the Open field provided, enter msinfo32 and select OK.
New User Interface HardwareTroubleshooting Guide
50
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
FIGURE 87 - RUN W INDOW
3. The System Information window appears. The OS Name and System Manufacturer are listed for your reference.
FIGURE 88 - SYSTEM INFORMATION W INDOW
New User Interface HardwareTroubleshooting Guide
51
© 1999-2014 Jack Henry & Associates, Inc.® Hardware Troubleshooting October 2014
