DIAMOND A class of its own

Catalogue no. 84 Valid as of July 2011

DIAMOND Comfort and reliability in surgery

High weight capacity up to 450 kg Additional electromotive leg section/ leg supports adjustment/back section adjustment in reverse mode for an exact patient positioning and intraoperative correction of position Modular table top for procedure specific configuration SAF pads special foam for decubitus prevention and enhanced patient comfort, removable, washable, impermeable

Override System to ensure functionality Multilevel telescopic height adjustment column 500 mm height adjustment range, initial height: 620 mm

Stainless steel inlay plates Excellent ground clearance optimal foot access for surgeon and surgical team Stability high stability against traction and compression forces, especially in orthopaedic interventions Mobility 4 easy-running ball-bearing castors diam. 125 mm, 2 of which antistatic, directional castor, separately activatable, with fluid protection cover

2

3

Operational concept

Hand control (optionally wireless hand control unit 101.07.016, transmission of signals via Bluetooth technology) Backlit display indicating status information, e.g. currently chosen position, Reverse-Mode function and status of battery charge.

Illuminated display Menu navigation key for additional functions

Direction keys for additional functions - kidney bridge - longitudinal shift - etc.

Backlit control panel ensures a safe and easy handling even in the darkened operating room.

Activate

Examples for status information on the display

Collision warnings

Warning in case chosen table function is not compatible with attached extension device

Foot control (optionally wireless foot control unit 101.07.017, transmission of signals via Bluetooth technology)

Positioning

Table locking advice

Reverse-Mode 0 position

integrated LEDs for illumination of the control panel

large, backlit display 0 position

Further control elements see page 21. 4

Menu navigation and positioning

Activate foot control

Dual-level security system for all table functions Detachable manual control for a convenient table adjustment. Add. foot pedals for manual adjustment with pre-selection dials.

Pre-selection dials for manual adjustment by means of foot pedal

Foot pedal for manual adjustment

Foot pedal on both sides for central locking and activation of directional castor 5

Performance features

Reverse Mode positioning for better intraoperative screening and an outstanding legspace for the surgical team, especially for procedures requiring seated access.

1120 mm 620 mm

Telescopic height adjustment column with generous adjustment range Optimal access to the operating area in standing and sitting interventions. Fatigue-free and ergonomic surgical work. 6

1 Head and leg plates removable at the push of a button Patient positioning in reverse mode thanks to an easy exchange of head and leg plate. The interlocking adaptors allow an easy attachment of the table elements.

1 2 High directional stability and manoeuvrability thanks to selectable 5th castor. 3 Memory foam pads provide an efficient decubitus prophylaxis and an enhanced comfort to the patient at the same time.

2

3 4 Central delivery point for connection of mains cable, selector key for mains or battery operation, potential equalization socket and main switch. All connections and function keys are splash-proof.

4

7

Performance features

Longitudinal shift of table-top by totally 290 mm (DIAMOND 60 BLK only) Unrestrained X-ray imaging, improved access to the operating area and optimisation of the foot and leg space.

389

1129

722

592

2240

8

979

1960

1129

With back section extension, longitudinal shift to head end

389

979

Area accessable for X-ray imaging by C-arm

Longitudinal shift to foot end

Examples for the use of a table with longitudinal shift An optimized positioning of the patient can be achieved by using a table with longitudinal shift. The possible X-ray imaging area will be increased, the access to the operating area improved.

9

Positionings

Thoracic surgery/kidney position

Gallbladder surgery

Breast surgery, supine

Breast surgery, seated

10

Vascular surgery

Ophthalmology

ENT

Struma

11

Positionings

Gastric banding

Positioning of bariatric patients using extension pads no. 101.07.009

12

Bariatric laparoscopic surgery

Gynaecology

Gynaecology

Urology

Urology

13

Positionings

Spinal surgery

Spinal surgery

Neurosurgery

Neurosurgery

14

Neurosurgery/Spinal surgery

Neurosurgery

15

Positionings

Upper limb trauma

Shoulder arthroscopy

Knee arthroscopy

Hand surgery

16

Fractures of the shaft of the femur

Tibial shaft fracture

Fractures of the neck of femur 17

Recommended accessory kits for DIAMOND operating tables

General Surgery 101.14.001 Head section 101.14.002 Leg section 101.05.001 Arm rest 101.05.003 Wristlet 101.05.007 Body restraint strap 101.07.001 Anaesthetic frame 101.07.002 Anaesthetic frame extension 101.05.004 Wristlet 2x 101.03.003 Bracket for body supports 2x 101.03.005 Shoulder/lateral support 2x 101.13.002 Leg support (Goepel type) 2x 101.20.004 Radial setting clamp Gynaecology DIAMOND 60 BLK 101.14.001 Head section 101.14.002 Leg section 101.13.010 2x 101.13.002 2x 101.20.004 101.13.006 101.03.001

GYN adapting section Leg support (Goepel type) Radial setting clamp Rinsing basin with attachment Pair of shoulder supports

101.05.001 Arm rest 101.05.003 Wristlet 101.07.001 Anaesthetic frame 101.07.002 Anaesthetic frame extension 101.05.004 Wristlet as an alternative to 101.13.002/101.20.004: 101.13.001 Pair of leg supports

Minimal invasive surgery/ laparoscopy DIAMOND 60 BLK 101.14.001 Head section 101.14.002 Leg section

DIAMOND 60 BG 101.14.001 Head section 101.14.002 Leg section

101.05.001 Arm rest 101.05.003 Wristlet 2x 101.05.006 Leg restraint strap 101.07.001 Anaesthetic frame 101.07.002 Anaesthetic frame extension 101.07.008 Foot rest 2x 101.03.003 Bracket for body supports 2x 101.03.005 Shoulder/lateral support 2x 101.13.002 Leg support (Goepel type) 2x 101.20.004 Radial setting clamp as an alternative to 101.13.002/101.20.004: 101.13.001 Pair of leg supports

101.12.013 Cushion 3x 101.03.003 Bracket for body supports 2x 101.03.006 Back/buttock support 101.03.007 Pubis/sacrum/ sternum support

as an alternative to 101.07.008: 101.07.010 Foot rest (pair) 101.05.008 Leg restraint straps (pair) Urology/TUR DIAMOND 60 BLK 101.14.001 Head section 101.14.002 Leg section 101.13.009 Urology adaptor 2x 101.13.002 Leg support (Goepel type) 2x 101.20.004 Radial setting clamp 101.13.007 Deep drain basin 101.13.008 Sieve 101.13.003 Pair of elbow rests 101.03.001 Pair of shoulder supports 101.05.001 Arm rest 101.05.003 Wristlet 101.07.001 Anaesthetic frame 101.07.002 Anaesthetic frame extension 101.05.004 Wristlet 101.07.011 Foot switch ENT/Struma/Ophthalmology 101.08.005 101.08.008 101.08.004 101.14.002 2x 101.05.001 101.05.007 101.07.001 101.07.002

18

Kidney and Thoracic surgery

Shaped head rest Connecting piece Universal adaptor Leg section Arm rest Body restraint strap Anaesthetic frame Anaesthetic frame extension

101.05.002 Arm rest 101.05.007 Body restraint strap 101.07.001 Anaesthetic frame 101.07.002 Anaesthetic frame extension 101.05.004 Wristlet Rectum surgery 101.14.001 Head section 101.14.002 Leg section 101.07.008 Knee/foot rest 101.07.007 Rectoscopy/ Buttock support 2x 101.20.004 Attachment clamp 101.03.001 2x 101.05.001 101.07.001 101.07.002

Pair of shoulder supports Arm rest Anaesthetic frame Anaesthetic frame extension

as an alternative to 101.07.008 u. 101.07.007: 2x 101.13.002 Leg support (Goepel type) 2x 101.20.004 Radial setting clamp

Bariatric surgery 101.14.001 Head section 101.14.002 Leg section 101.07.009 2x 101.05.001 101.05.007 101.07.001 101.07.002

Set of extension pads, 500 mm long (dual set) Arm rest Body restraint strap Anaesthetic frame Anaesthetic frame extension

as an alternative to 101.07.009: 101.07.020 Set of extension pads, 300 mm long (dual set) Lower limb trauma surgery 101.14.001 Headrest 101.06.001 Extension device with basic accessories: 2 extension bar supports, 2 foot plates for adults, 2 traction boots for adults, 1 countertraction post for dorsal position 101.06.002 Mounting fixture 101.06.025 Mounting arbor or 101.06.026 Mounting arbor 101.06.023 Transport trolley or 101.06.024 Transport trolley 101.06.007 Countertraction post for lateral position 101.06.003 Pad 101.07.018 Transfer leg plates 2x 101.03.002 Lateral support 101.05.001 Arm rest 101.07.001 Anaesthetic frame 101.05.004 Wristlet

add.: for treatment of femur/ neck of femur: 101.06.006 Kirschner wire device 101.13.002 Goepel-type leg support 101.20.004 Radial setting clamp 101.06.009 Side rail extension



add.: for treatment of tibial fracture: 101.06.008 Traction device for tibia 101.13.002 Goepel-type leg support 101.20.004 Radial setting clamp 101.06.009 Side rail extension

Upper limb trauma surgery 101.14.001 Head section 101.14.002 Leg section 101.04.004 Upper arm positioning device 101.20.004 Radial setting clamp 101.04.005 Countertraction post for upper arm 101.20.004 Attachment clamp 101.04.006 Weinberger hand traction device 101.04.003 Upper arm positioning plate 101.20.002 Attachment clamp 101.05.003 Wristlet 101.05.007 Body restraint strap Arm/Hand surgery 101.14.001 Head section 101.14.002 Leg section 101.04.002 Arm/hand operating table (CFRP board) 101.05.001 Arm rest 101.05.004 Wristlet 101.05.007 Body restraint strap 101.07.001 Anaesthetic frame Spinal surgery DIAMOND 60 BLK 101.14.001 Head section 101.14.002 Leg section 101.07.008 101.07.007 2x 101.20.004 101.12.013 101.12.001

Knee/foot rest Buttock support Radial setting clamp Semi-circular cushion Cushion for prone position

Knee arthroscopy 101.14.001 Head section 101.14.002 Leg section 101.07.014 Knee positioning device 101.20.004 Radial setting clamp 101.05.006 Leg restraint strap 101.05.001 Arm rest 101.07.001 Anaesthetic frame 101.05.004 Wristlet Shoulder arthroscopy 101.08.001 Headrest for shoulder surgery 101.08.006 Connecting piece 101.07.013 Shoulder arthroscopy plate 2x 101.05.002 Arm rest 101.05.007 Body restraint strap Neurosurgery 101.14.002 Leg section 101.09.002 101.09.004 101.09.003 101.09.005 101.09.001 2x 101.20.001 101.08.004

Doro connecting piece Doro Universal basic unit Doro Skull Clamp Doro shaped head rest Cross-bar attachment Attachment clamp Universal adaptor

101.05.002 Arm rest 101.05.004 Wristlet 101.05.007 Body restraint strap 101.07.001 Anaesthetic frame

2x 101.05.001 Arm rest 101.07.001 Anaesthetic frame as an alternative to 101.07.008: 101.07.015 Knee/foot rest

19

DIAMOND Overview of models

Model No.

Description

170.10.550 DIAMOND 50 BK Universal operating table with short back section and electrohydraulic adjustment by means of optional hand-held control unit of 5 table functions: - Raise/Lower, - Lateral, - Trendelenburg/Reverse Trendelenburg, - Back section, - Leg section. Additional adjustment of these functions by means of removable emergency control (electrohydraulic) or emergency handwheels and foot pump (hydraulic). Rechargeable batteries. Integrated battery charger with mains cable 230 V. Mobile with 4 double castors, 2 of which antistatic, central lock, 1 spring-loaded directional castor, activated by foot pedals from both sides of the table. Without head and leg plates, back section elongation and hand control unit. 170.10.600 DIAMOND 60 BLK Similar to DIAMOND 50 BK, but in addition: Electro-hydraulic longitudinal shift function of table-top by totally 290 mm for optimal use of image intensifier. Without head and leg sections, back section elongation and hand control unit.

170.10.640 DIAMOND 60 BG Similar to DIAMOND 50 BK model, but long back section with integrated kidney bridge with electro-hydraulic height adjustment by 100 mm. Without head and leg sections and hand control unit.

145 mm 145 mm

30° 2240 mm

20

30°

70°

40°

70° up 90° down

Control elements

Model No.

Description

101.07.038 Hand control unit, cable-connected plastic casing, sealed against ingress of fluids. Illuminated TFT display indicating all status information of the table. Backlit keyboard for all adjustment functions.

101.07.016 Hand control unit, Bluetooth plastic casing, sealed against ingress of fluids, wireless Bluetooth connection. Illuminated TFT display indicating all status information of the table. Backlit keyboard for all adjustment functions. Incl. charging cable for recharging the control unit. Requires Bluetooth preparation 101.07.039!

101.07.011 Foot control, cable-connected Cast aluminium casing, sealed against ingress of fluids, antiskid, cable-connected. For all table adjustment functions analogous to its hand-held control. Backlit TFT display for easy navigation, control panel illuminated by LEDs in the foot bar (for MIS). Activation key and “Return to zero” key. Can be connected to the table at the same time as the hand-held control unit.

101.07.017 Foot control, Bluetooth Cast aluminium casing, sealed against ingress of fluids, antiskid, wireless Bluetooth connection. For all table adjustment functions analogous to its hand-held control. Backlit TFT display for easy navigation, control panel illuminated by LEDs in the foot bar (for MIS). Activation key and “Return to zero” key. Can be connected to the table at the same time as the hand-held control unit . Requires Bluetooth preparation 101.07.039!

550 mm

20° 620 – 1120 mm

20°

101.07.039 Bluetooth preparation Preparation of DIAMOND operating table for use of Bluetooth hand and foot control unit. (w/o ill.) No subsequent fitting possible! We recommend to always have the table equipped with the Bluetooth preparation in order to be able to profit from the advantages of the Bluetooth system even at a later date. 21

Basic equipment

Model No.

Description

101.14.001 Head plate double-adjustment, automatic latching of pad inclination, integrated gas spring for weight compensation, detachable.

101.14.004 Leg section one-section type, additional manual folding with gas spring assistance, detachable.

101.14.002 Leg section split type, fold-down, swivelling via latching mechanism, integrated gas spring for weight compensation, detachable. Optionally without 45° cut-out.

22

Model No.

Description

101.14.006 Leg section four-part, fold-down, swivelling via latching mechanism, integrated gas spring for weight compensation, detachable. Optionally without 45° cut-out.

101.14.003 Back section extension, fixed to be attached to the short back section, length 280 mm.

101.14.007 Filler for gyn. cut-out to cover the cut-out at seat and leg section.

23

General accessories

1

4

7

2

5

8

3

6

9

1 Arm rest 101.05.001 integral foam pad, antistatic, 400 mm long, with arm strap and attachment clamp 101.20.003, horizontally and vertically adjustable, tiltable via ball-and-socket joint, stainless steel. 2 Arm rest 101.05.002 covered foam pad, antistatic, height adjustment range: 80 mm, one-touch swivelling through 360°, turning and tilting up to +/- 35°, incl. stainless steel clamp, 600 x 170 mm (W x D). 3 Wristlet 101.05.003 with stainless steel clamp, washable and exchangeable textile strap, hook-and-loop fastener.

24

4 Body restraint strap 101.05.007 with stainless steel attachment elements, washable and exchangeable, hook-and-loop fasteners.

7 Anaesthetic frame 101.07.001 stainless steel, with twist protection, height adjustable, with swivelling clamp.

5 Arm protector 101.05.005 comfortable for the OR staff positioned at the side of the OR table, safe protection and anatomically correct positioning of the patient‘s arm by the protector, which is pushed under the OR table pad and secured by the patient‘s weight, 400 x 230 x 210 mm (W x D x H).

8 Anaesthetic frame extension 101.07.002 for anaesthetic frame 101.07.001, swivelling and laterally adjustable, length 300 mm.

6 Leg restraint strap 101.05.006 washable tissue strap with hook-and-loop fastener, for leg fixation, suitable for leg section 101.14.002.

9 Wristlet 101.05.004 for attachment to anaesthetic frame 101.07.001 washable and exchangeable textile strap with hook-and-loop fastener, stainless steel attachment.

10 Infusion pole 101.07.004 stainless steel, upper section with 4 hooks, height adjustable, attachment clamp with ball-and-socket joint. 11 Attachment clamp 101.20.001 stainless steel, swivel type, with quick release and lock, suitable for poles of 16 to 18 mm diameter.

13

12 Attachment clamp 101.20.002 stainless steel, non-swivel type, with release and lock, suitable for square-section poles 20 x 20 mm. 13 Instrument serving table 101.07.006 fixing to the side rail by means of attachment clamp, height adjustable 250 mm and swivelling via self-locking ball-and-socket joint, thus always ensuring horizontal positioning of the tray, safe working load approx. 6 kg, dimensions of tray: 450 x 260 mm (W x D).

14

14 Flexible anaesthetic frame 101.07.003 2000 mm long, 2 attachment clamps 101.20.004 required. 15 Tube holder 101.07.005 for secure positioning of ventilation tubes and monitor cables, helix flexible shaft, height adjustable, with robust plastic plate. Requires attachment clamp 101.20.004! 16 Attachment clamp 101.20.003 non-swivel type, suitable for poles of 16 to 18 mm diameter and square-section poles of 10 x 25 mm, stainless steel.

10

15

11

16

12

17

17 Radial setting clamp 101.20.004 swivel type, suitable for poles of 16 to 18 mm diameter, stainless steel.

25

General accessories

1 Shoulder support (pair) 101.03.001 incl. 2 clamps 101.20.002, 2 antistatic pads (120 x 200 mm) and 2 attachment bars to adjust pads horizontally and vertically. 2 Lateral support (1 piece) 101.03.002 simple version, including attachment clamp to side rail, smooth antistatic pad (100 x 215 mm). 3 Rectoscopy/Buttocks support 101.07.007 adjustable in width, with soft pad, for rectal positioning and spinal surgery. Requires 2 clamps 101.20.001 or 101.20.004!

1

4 Knee/foot rest 101.07.008 for rectal and spinal surgeries with the patient in knee/elbow position, serves also as foot rest for laparoscopic surgery, to be fixed to leg section of DIAMOND operating table, including 2 attachment clamps 101.20.003. 5 Bracket for body support 101.03.003 (Ill. 1) for attachment of pads 101.03.004, 101.03.005, 101.03.006 and 101.03.007, enables double swivelling and horizontal as well as vertical adjustment of the supports, includes clamp 101.20.002.

2

3+4

Body support roll 101.03.004 (Ill. 2), integral foam pad, antistatic, 200 x 65 mm.

2

Shoulder/lateral support 101.03.005 (Ill. 3), covered concave foam pad, antistatic, 215 x 100 mm. Back/buttock support 101.03.006 (Ill. 4), covered foam pad, antistatic, 200 x 120 mm. Pubis/sacrum/sternum support 101.03.007 (Ill. 5), covered foam pad, antistatic, 85 x 85 mm.

1

5

26

3

4 5

ill. shows 2 sets of 101.07.009

6

7

9

11

8

10

12

6 Set of extension pads 101.07.009 set of 2 foam pads with antistatic cover, 500 mm long, for seat and back section, attachment to side rails via quick-locking clamps, with addit. side rails for accessories. For positioning of adipose patients as well as positionings in which patients have to be turned during intervention. New total width of table-top: 800 mm. Set of extension pads 101.07.020 similar to extension pads 101.07.009, but 300 mm long (w/o ill.). 7 Foot rest (pair) 101.07.010 attachment to the side rails by means of integrated clamps, width adjustable from 430 to 735 mm, can be folded down to serve as a table-top extension, 250 x 200 mm (H x W). 8 Leg restraint strap 101.05.008 1 pair, with pads, for split leg section, incl. attachment clamps to attach to side rails, length: 1200 mm.

9 Rack for accessories 101.07.012 stainless steel square-section tubular frame with 5 rails for attachment of accessories and 1 basket, antistatic swivel castors, overall dimensions: 630 x 580 x 1430 mm (W x D x H) 10 Transfer leg plates (pair) 101.07.018 attachment to seat section instead of leg section. Bent stainless steel tube with fabric cover lightweight construction. For anaesthetization of patients for gynaecological or urological interventions or for interventions using the extension device.

11 Rack for storing of head and leg plates 101.07.041 stainless steel square-section tubular frame with 6 pairs of mounting devices for DIAMOND head and leg plates, 2 standard rails and 1 basket. El. conductive swivel castors. Total dimensions: 918 x 1243 x 1308 mm (W x D x H) 12 Transfer leg plate, one-section 101.07.040 similar to 101.07.018, but one-section CFRP crossbar 101.07.024 for back section, radiolucent. For DIAMOND 60 BG only! (w/o ill.) Potential equalization cable 101.07.022 3 m long (w/o ill.) Potential equalization cable 101.07.023 5 m long (w/o ill.)

27

Accessories for orthopaedics, traumatology, spinal surgery and orthopaedic extension

1 Arm/hand operating table 101.04.002 radiolucent CFRP board with covered antistatic foam pad, ergonomic shape for optimal access to the surgical field, 815 x 520 mm (W x D). 2 Upper arm positioning plate 101.04.003 radiolucent, height adjustment approx. 100 mm by means of clamp, swivels through 90°, foam pad 210 x 260 mm, (W x D), safe working load: 10 kg. Requires attachment clamp 101.20.002. 3 Upper arm positioning device 101.04.004 for intramedullary nailing of the upper arm, vertical rod and horizontal linear guide with accessory rail, adjustable by means of locking ball-and-socket joint, for attachment of the Weinberger hand traction device 101.04.006 (to be ordered separately). Requires attachment clamp 101.20.004. 4 Weinberger hand traction device 101.04.006 radiolucent, for hand and finger positioning and traction, hand plate and finger holder of plastic material, to be attached to upper arm positioning device 101.04.004, safe working load: 30 kg.

1

4

5 Countertraction post for upper arm 101.04.005 padded, radiolucent, safe working load: 12 kg. Requires attachment clamp 101.20.004.

2

3 28

5

Width adjustable

Length adjustable

6

7

9

11

8

10

12

6 Shoulder arthroscopy plate 101.07.013 attachment instead of leg plate, with individually detachable lateral pads for free access to the shoulders, with side rails. Requires connecting piece 101.08.006 and shaped head rest 101.08.001. 7 Shoulder plate 101.07.021 attachment instead of leg plate, with side rails. Requires connecting piece 101.08.008 and shaped head rest 101.08.005. 8 Shaped head rest for shoulder surgery 101.08.001 U-shaped helmet with soft pads and 2 fastening straps with hook-and-loop fastener. Safe positioning and lateral fixation of the head while the patient is anaesthetized. Adjustable to varying head sizes, detachable pad. Safe working load: 11 kg. Requires connecting piece 101.08.006 for attachment to the shoulder arthroscopy plate 101.07.013.

9 Cushion 101.12.001 for intervertebral disc operations, ten-section for individual adaptation to the patient‘s body size, radiolucent, antistatic, abdominal cut-out with thermomodulating special foam core on plastic board. Overall dimensions (incl. all sections): 640 x 420 x 120 mm (W x D x H).

11 Knee-elbow positioning device101.07.015 attachment to the table instead of the leg section, for knee-elbow positioning of patient for spinal surgery, covered foam pad, antistatic, height adjustment 200 mm by means of hand crank, with side rails, safe working load: 135 kg. 510 x 300 x 120 mm (W x D x H).

10 Knee positioning device 101.07.014 manually adjustable, with gel pad and fastening strap. Side rail attachment (requires attachment clamp 101.20.004). Safe working load: 25 kg.

12 Lateral support pad 101.07.019 for lateral support of patient, attachment to the knee-elbow positioning device 101.07.015 by means of clamp (incl.).

29

Extension device

Accessories for orthopaedics, traumatology, spinal surgery and extension For treatment of all kinds of lower limb fractures. Essential features: – Fast, simple and secure attaching of the device to the DIAMOND Operating Tables – modular structure for optimal range of application – unobstructed access to the lower limbs for X-ray image intensifier and complete transillumination of the two axes – well-devised accessories for comfortable and precise positioning of the patient – disinfectant-proof stainless-steel construction Extension device 101.06.001 For attachment to the DIAMOND operating table, with positioning plate and countertraction post, extension bars with firm positive double joints for swivelling and height adjustment. Joint in the bar can either be adjusted horizontally or vertically for optimal X-ray accessibility. Shiftable traction units mounted on the extension bars; tilting, swivelling and rotation joint. All metal parts are made of electropolished stainless steel. Requires mounting fixture 101.06.002 and pad 101.06.003 as well as mounting arbor 101.06.025 or 101.06.026! Complete with basic accessories: 2 extension bar supports, 2 foot plates for adults, 2 traction boots for adults, 1 countertraction post for dorsal position, Weight: 34 kg 1 Mounting fixture 101.06.002 for all DIAMOND table models, to attach the extension device 101.06.001. 2 Mounting arbor 101.06.025 for DIAMOND tables with longitudinal shift function. Required for mounting of extension device 101.06.001 in combination with mounting fixture 101.06.002.

1

4

2

5

Mounting arbor 101.06.026 similar to 101.06.025, but for DIAMOND tables without longitudinal shift function. (w/o ill.) 3 Pad 101.06.003 for positioning plate of extension device, for operating tables with gyn. cut-out. (upon request, also available for tables w/o gyn. cut-out)

4 Transport trolley 101.06.023 Trolley for transportation and storage of the extension device split into separate modules. 5 Transport trolley 101.06.024 similar to 101.06.023, but for transportation and storage of the fully mounted extension device.

3 30

Standard accessories

Further accessories

Extension bar (horizontal or vertical insertion)

6

9

Horizontal swivelling of extension bars

7

10

Vertical adjustment of extension bar when inserted in vertical orientation

8

11

6 Pelvis plaster adapter with pelvis support 101.06.005 7 Kirschner wire device 101.06.006 8 Countertraction post for lateral position 101.06.007

Countertraction post for dorsal position

9 Transfer leg plates (pair) 101.07.018 attachment to seat section instead of leg section. Bent stainless steel tube with fabric cover, lightweight construction. For anaesthetization of patients for gynaecological or urological interventions or for interventions using the extension device. Length of leg plates: 875 mm 10 Traction device for tibial fractures 101.06.008 countertraction post for lower leg, height adjustable and detachable. Tiltable by means of a gear rim joint. 11 Side rail extension (pair) 101.06.009 at the seat section, for attachment of a Goepel-type leg support 101.13.002 using radial setting clamp 101.20.004 w/o ill.: 2 foot plates for children 101.06.010 2 traction boots for children 101.06.011

31

Accessories for head positioning and neurosurgery

1 Universal adaptor 101.08.004 stainless steel, for attachment of universal basic unit 101.09.004, supporting arm 101.08.002 and connecting piece101.08.006 or 101.08.008. 2 Supporting arm 101.08.002 U-shaped for access of image intensifier, tiltable with braked eccentric lever joint, slide rail 360° rotatable by means of braked adjustment device. For shaped head rest 101.08.005 or 101.08.007 and connecting piece 101.08.003 (requires universal adaptor 101.08.004).

1

5

2

6

3

7

4

8

3 Connecting piece 101.08.003 height adjustable by means of clamp, slide rail with braked swivel-joint adjustment (requires supporting arm 101.08.002 and shaped head rest 101.08.005 or 101.08.007). 4 Connecting piece 101.08.006 height adjustable and inclinable side rail adaptor, 240 mm long, suitable for head rest 101.08.005 or 101.08.007 (requires universal adaptor 101.08.004). 5 Connecting piece 101.08.008 with central square receptacle; three-joint adjustment by means of star handles, with side rail adaptor, 275 mm long, suitable for head rest 101.08.005 or 101.08.007 (requires universal adaptor 101.08.004). 6 Shaped head rest 101.08.005 1-section, PU head rest with detachable pad and restraint strap, optimal pressure distribution in prone and supine position. Safe working load: 15 kg. (requires connecting piece 101.08.006 or 101.08.008 and universal adaptor 101.08.004). 7 Shaped head rest 101.08.007 2-section rest, adjustable in width, PU head rest with detachable pad and restraint strap, optimal pressure distribution in prone and supine position. Safe working load: 15 kg. (requires connecting piece 101.08.006 or 101.08.008 and universal adaptor 101.08.004). 8 Surgeon’s arm rest 101.08.009 hand support for ophthalmic microsurgery. Height adjustable and reversible. Safe working load: 10 kg. For attachment to connecting piece 101.08.006 or 101.08.008.

32

11

14

9

12

15

10

13

16

9 Cross-bar attachment 101.09.001 stainless steel, for seated patient positioning in neurosurgery, adjustment for different table widths. Requires 2 clamps 101.20.001!

11 Doro Skull clamp adaptor 101.09.002 to attach skull clamp 101.09.003 or shaped head rest 101.09.005 to universal basic unit 101.09.004. Upon request, also available in radiolucent material.

14 Doro Shaped head rest 101.09.005 double-adjustment, U-shaped gel pads, requires Skull clamp adaptor 101.09.002 and basic unit 101.09.004.

10 Doro Universal basic unit 101.09.004 with double-joint adjustment, attachment to adaptor 101.08.004 or cross-bar attachment 191.09.001. Upon request, also available in radiolucent material.

12 Doro Skull clamp adaptor with ball-and-socket joint 101.09.006 provides 360° rotation, horizontal inclination up to 90°, to attach Skull Clamp 101.09.003 or Shaped head rest 101.09.005 to Connecting piece 101.09.004. Upon request, also available in radiolucent material.

15 Doro Skull Pins 101.09.007 3 pcs. reusable skull pins, pediatric. 16 Doro Skull Pins 101.09.008 3 pcs. reusable skull pins, adult.

13 Doro Skull Clamp 101.09.003 for a secure and stable 3-point fixation of patient‘s head in supine, prone, lateral or sitting position. With 3 pins for adults. Upon request, also available in radiolucent material.

33

Accessories for gynaecology and urology

1 1 Leg support (pair) 101.13.001 height adjustable and swivelling from the foot end, servo-assisted, plastic support with gel pad for foot and lower leg, adjustable to all directions. Special attachment clamps already included. (Manufacturer: Amatech Corporation, USA)

34

2

5

3

6

4

7

2 Leg support (Goepel type) 101.13.002 black integral foam pad, antistatic, with fastening strap, w/o clamp. Stainless steel 18/10, rod of 520 mm length. requires attachment clamp ref. 101.20.001 or 101.20.004

5 Gynaecological adaptor 101.13.010 to extend the seat section by 285 mm, for gynaecological and urological surgery, fully radiolucent, with side rails and cut-out for gynaecology. (upon request, also available for tables without gyn. cut-out).

3 Elbow rests (pair) 101.13.003 with stainless steel supports for attachment to uro. adaptor 101.13.009, covered foam pads, antistatic, 120 x 200 mm (L x W).

6 Rinsing basin with holder 101.13.006 stainless steel, attachment to table column, with outlet and plastic hose, dimensions of basin: 350 x 325 x 60 mm (W x D x H).

4 Urological adaptor 101.13.009 to extend the seat section by approx. 420 mm, with cut-out for urological interventions, fully radiolucent, stainless steel side rails 25 x 10 mm (upon re-quest, also available for tables without gyn. cut-out).

7 Swivel-mounted rinsing basin with holder 101.13.007 stainless steel holder and basin, with outlet and plastic hose, incl. clamp for attachment to side rail. Dimensions of basin: 350 x 325 x 150 mm (W x D x H). TUR sieve 101.13.008 stainless steel, for basin 101.13.007. (w/o ill.)

Positioning aids

1 Gel head rest for prone positioning 101.12.002 adult size, anatomically designed so that the patient’s head can comfortably rest face down, outlets for ET tubes on both sides, 280 x 240 x 150 mm (W x D x H).

1

4

2 Gel head rest for prone positioning 101.12.003 paediatric, anatomically designed so that the patient’s head can comfortably rest face down, outlets for ET tubes on both sides, 260 x 230 x 140 mm (W x D x H). 3 Gel head ring 101.12.004 open, adult size, provides stability and protection to the patient’s face during surgery in lateral position, Ø 200 x 54 mm. 4 Gel head ring 101.12.005 open, paediatric, provides stability and protection to the patient’s face during surgery in lateral position, Ø 140 x 34 mm.

2

5

5 Gel head ring 101.12.006 closed, adult size, protects the head and ears during surgery in supine position, Ø 200 x 50 mm. 6 Gel head ring 101.12.007 closed, paediatric, protects the head and ears during surgery in supine position, Ø 140 x 34 mm.

3

6

35

Positioning aids

1 Gel pad for lateral positioning 101.12.008 for safe lateral positioning, to relieve pressure on the shoulder joint and protect the nerve tracts, for surgical interventions on the hip, on the shoulder or on the kidney, 720 x 500 x 160 mm (W x D x H). 2 Gel heel pads (pair) 101.12.009 to support the Achilles area and relieve pressure on the patients heels during lengthy surgical procedures, 190 x 100 x 70 mm (W x D x H). 3 Tunnel cushion 101.12.010 for lateral patient positioning, prevents the risk of positioning damage to the patient‘s legs, antistatic covered pad with special foam core of 70 mm thickness, 650 x 400 x 220 mm (W x D x H).

1

4

2

5

4 Double wedge pad 101.12.011 for supine patient positioning, designed to prevent brachial plexus paralysis and to stabilize the head, 440 x 500 x 100 mm (W x D x H). 5 Cushion 101.12.013 antistatic covered foam pad, semicircular, 240 x 120 x 475 mm (W x H x L).

3

36

DIAMOND Technical data Configuration

Total table length - with kidney bridge (DIAMOND 60 BG only) Length of table-top - with kidney bridge (DIAMOND 60 BG only)

2240 mm 2185 mm 960 mm 1185 mm

Length of head section

300 mm

Length of leg section

700 mm

Length of back section extension

280 mm

Width of table-top

550 mm

Overall width

600 mm

Table footprint (length x width) Diametre of double castors

1140 mm x 705 mm 125 mm

Height adjustment range (w/o pads)

620 mm - 1120 mm

- incl. longitudinal shift function (DIAMOND 60 BLK only)

680 mm - 1180 mm

Trendelenburg, electrohydraulic

30°

Reverse Trendelenburg, electrohydraulic

30°

Lateral adjustment, electrohydraulic Longitudinal shift (DIAMOND 60 BLK only) Back section, electrohydraulic Kidney bridge lift, electrohydraulic (DIAMOND 60 BG only) Electrohydraulic inclination of leg section Manual inclination of leg section, gas spring assisted

+/- 20° approx. 290 mm - 40°/+ 70° approx. 100 mm - 90°/+ 70° - 90°

Spread angle of leg plates

70°

Inclination of head section, gas spring assisted

- 45°/+ 25°

Tilt angle of head section pad

25°

Total weight incl. head and leg sections

280 kg

- incl. kidney bridge (DIAMOND 60 BG only)

285 kg

- incl. longitudinal shift function (DIAMOND 60 BLK only)

290 kg

Total weight capacity

up to 450 kg

Safe working load

up to 360 kg

Battery operation

X

Integrated battery charger/mains adaptor

X

Emergency operation via mains power supply

X

Mechanical emergency override of all hydraulic functions

X

Voltage range of mains adaptor

115 V/230 V, 50/60 Hz

Right of modification in construction and dimension reserved.

Standard configuration: Two-section, radiolucent table-top composed of: – Back section – Seat section with cut-out for gynaecology Electrohydraulic adjustment functions: – High/Low – Trendelenburg/Reverse Trendelenburg – Lateral tilt – Back section – Leg plates – longitudinal shift function (DIAMOND 60 BLK only) – Kidney bridge (DIAMOND 60 BG only) Override systems: Independent adjustment of table functions by means of detachable emergency control panel (electrohydraulic) and emergency control handwheels at the column and foot pump (hydraulic). Radiolucent table-top, SAF mattress, 60 mm thick (pads 80 mm thick upon request), antistatic. Stainless steel table frame construction, sandblasted and electropolished, disinfection-proof. Stainless steel side rails 25 x 10 mm on both sides of the table-top for attachment of accessories, telescopic height adjustment column with stainless steel cover. Table base cover of impactproof ABS, colour silver-grey, with two inlaid SST plates to protect the cover, SST floor pan. Chassis with 4 double castors, two of which antistatic, with central lock, 1 spring-loaded directional castor, activated by foot pedal on both sides. With return-to-zero function and crash detection. Input voltage at power supply: 115 V/230 V, 50/60 Hz.

All articles including corresponding ­accessories marked with the CE label meet the standards for medical ­devices acc. to MPG and the EC regulation 93/42/EEC. The products may only be used for their intended purpose of use. Please also observe our operating ­manual!

been to have We ed acc. 008 certifi 9001:2 2007 5: SO E N I O 1348 S I   N E

37

DIAMOND Configuration Options

101.08.003 101.08.002 Supporting arm Connecting piece 101.14.001 Head plate

101.08.005 Shaped head rest

101.08.007 Shaped head rest

101.08.006 Connecting piece

101.08.004 Universal adaptor

101.08.008 Connecting piece

101.14.003 Back section extension, fixed (not with DIAMOND 60 BG)

38

101.06.002 Mounting fixture

101.06.025 Mounting arbor

or

101.06.026 Mounting arbor

101.07.021 Shoulder plate

101.07.013 Shoulder arthroscopy plate

101.06.001 Extension device + 101.06.003 Pad

101.08.008 Connecting piece

101.08.006 Connecting piece

101.08.005 Shaped head rest

101.08.001 Shaped head rest

101.13.009 Urological adaptor

101.13.010 Gynaecology adaptor

101.14.004 Leg section, one-section type

101.14.002 Leg section, split type

101.14.006 Leg section, four-part

39

Schmitz u. Söhne GmbH & Co. KG P. O. Box 14 61 58734 Wickede (Ruhr) Germany (postal address) Zum Ostenfeld 29 58739 Wickede (Ruhr) Germany (visiting address) Phone +49 (0) 2377-84-0 Fax +49 (0) 2377-84-135 www.schmitz-soehne.com [email protected] Technical service, hotline: Phone +49 (0) 2377 84549 Fax +49 (0) 2377 84210 [email protected]

Schmitz abroad: Switzerland SCHMITZ AG Schloss-Strasse 67 8207 Schaffhausen Phone +41 (0) 52 6 43 25 05 Fax +41 (0) 52 6 43 26 91 [email protected] SCHMITZ AG François Poncet Chemin de Bois 32 1020 Renens VD Phone +41 (0) 21 6 91 74 66 Fax +41 (0) 21 6 91 74 62 Mobile 079-2128334 [email protected]

All articles including corresponding a ­ ccessories marked with the CE label meet the standards for medical d ­ evices acc. to MPG and the EC regulation 93/42/EEC.

Spain SCHMITZ u. Söhne Ibérica S.L. Centro de Negocios Tartessos Edificio Artemisa C/Pollensa, n° 2 – Oficina 3 28290 Las Rozas (Madrid) Phone +34 (0) 91 6 40 45 14 Fax +34 (0) 91 6 36 63 05 [email protected] Italy SCHMITZ ITALIA S.r.l. Daniela Capeletti Piazza Garibaldi 20 15076 Ovada (AL) Phone +39 (01 43) 8 03 50 Fax +39 (01 43) 83 42 53 Mobile 349-6338723 [email protected] www.schmitz-italia.it France SCHMITZ FRANCE SAS Za du Serroir n° 2 54690 Lay Saint Christophe Phone +33 (0) 3 83 22 94 67 Fax +33 (0) 3 83 22 82 38 [email protected]

The products may only be used for their intended purpose of use. Please also observe our operating ­manual!

Russia and Eastern Europe Schmitz u. Söhne GmbH & Co. KG Sergey Kosolapov Bornaische Str. 180 04279 Leipzig Germany Phone +49 (0) 3 41 3 37 80 34 Fax +49 (0) 3 41 3 37 80 35 Mobile +49 (0) 1 52 09 07 70 58 [email protected] China Schmitz u. Söhne GmbH & Co. KG Guangzhou Representative Office World Trade Centre, North Tower 3105 Huan Shi East Road 371-375 Guangzhou 510095 Phone +86 (0) 20 87 61 33 01 Fax +86 (0) 20 87 60 39 23 [email protected] Latin America Schmitz u. Söhne GmbH & Co. KG Alfredo Gentile Av. Córdoba 1513 Piso 8, Oficina A Buenos Aires, Argentina Phone +54 (0)11 4811 4642 Fax +54 (0)11 4811 4642 Mobile 0911 6887 2086 [email protected]

been have acc. to e W ed 008 certifi 9001:2:2007 O 485 S I E N O 13 S EN I

The complete Schmitz-products range

Gynaecology, Urology and Proctology The perfect equipment to meet all requirements

varimed® The trolleys – our experts for everyday clinical practice

OPX Operating Tables for Outpatient Departments and Operating Theatres Unique Flexibility and Reliability

varimed® Furniture for OR theatres and day-surgery

STL 285, STS 282, STX 280 The Patient Transport Systems for Emergencies, Outpatient Depts., Intensive Care and X-Ray

varimed® Medical Furniture for Examination and Treatment Areas

Partura® The Schmitz delivery table comfortable and safe delivery – with focus on preventive obstetrics

The company reserves the right to alter the design, construction, dimensions and finish of its products without notice. All relevant dimensions and weights are quoted as approximate information/data. Due to technical reasons minor colour deviations are possible. Schmitz Catalogue No. 84, 07.2011 E