Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T298N
Elektrische Eigenschaften / Electrical properties Höchstzulässige Werte / Maximum rated values Periodische Vorwärts- und Rückwärts-Spitzensperrspannung Tvj = -40°C... Tvj max enndaten repetitive peak forward off-state and reverse voltages
VDRM,VRRM 1000 1200
1400 V 1600 V
Vorwärts-Stoßspitzensperrspannung non-repetitive peak forward off-state voltage
VDSM
1000 1200
1400 V 1600 V
VRSM
1100 1300
1500 V 1700 V
ElektrischeT Eigenschaften = -40°C... T vj
Rückwärts-Stoßspitzensperrspannung non-repetitive peak reverse voltage
vj max
Tvj = +25°C... Tvj max
Durchlaßstrom-Grenzeffektivwert maximum RMS on-state current
ITRMSM
600 A
Dauergrenzstrom average on-state current
TC = 85 °C TC = 68 °C
ITAVM
298 A 380 A
Stoßstrom-Grenzwert surge current
Tvj = 25 °C, tP = 10 ms Tvj = Tvj max, tP = 10 ms
ITSM
4900 A 4250 A
Grenzlastintegral I²t-value
Tvj = 25 °C, tP = 10 ms Tvj = Tvj max, tP = 10 ms
I²t
120 10³ A²s 90 10³ A²s
Kritische Stromsteilheit critical rate of rise of on-state current
(diT/dt)cr
150 A/µs
Kritische Spannungssteilheit critical rate of rise of off-state voltage
DIN IEC 60747-6 f = 50 Hz, iGM = 0,6 A diG/dt = 0,6 A/µs Tvj = Tvj max, vD = 0,67 VDRM th 5.Kennbuchstabe / 5 letter F
(dvD/dt)cr
1000 V/µs
Charakteristische Werte / Characteristic values Durchlaßspannung on-state voltage
Tvj = Tvj max , iT = 1100 A Tvj = Tvj max , iT = 300 A
vT
Schleusenspannung threshold voltage
Tvj = Tvj max
V(TO)
0,85 V
Ersatzwiderstand slope resistance
Tvj = Tvj max
rT
0,90 mΩ
Durchlaßkennlinie 100 A ≤ iT ≤ 1500 A on-state characteristic
Tvj = Tvj max
v T = A + B ⋅ i T + C ⋅ ln ( i T + 1) + D ⋅
max. max.
A= B= C= D=
iT
2,00 V 1,23 V
9,486E-01 6,089E-04 -5,553E-02 2,294E-02
Zündstrom gate trigger current
Tvj = 25 °C, vD = 12V
IGT
max.
150 mA
Zündspannung gate trigger voltage
Tvj = 25 °C, vD = 12V
VGT
max.
2 V
Nicht zündender Steuerstrom gate non-trigger current
Tvj = Tvj max , vD = 12V Tvj = Tvj max , vD = 0,5 VDRM
IGD
max. max.
10 mA 5 mA
Nicht zündende Steuerspannung gate non-trigger voltage
Tvj = Tvj max , vD = 0,5 VDRM
VGD
max.
0,25 V
Haltestrom holding current
Tvj = 25°C, vD = 12V
IH
max.
200 mA
Einraststrom latching current
Tvj = 25°C, vD = 12V, RGK ≥ 10 Ω iGM = 0,6 A, diG/dt = 0,6 A/µs tg = 20 µs Tvj = Tvj max vD = VDRM, vR = VRRM
IL
max.
800 mA
i D, i R
max.
30 mA
tgd
max.
3 µs
Vorwärts- und Rückwärts-Sperrstrom forward off-state and reverse current Zündverzug gate controlled delay time
DIN IEC 60747-6 Tvj = 25 °C, iGM = 0,6 A diG/dt = 0,6 A/µs
prepared by: H.Sandmann
date of publication: 2007-09-03 revision:
approved by: J.Przybilla
A 513 E2 / 16.02.84
A 07/84
1
Seite/page
1/10
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T298N
Elektrische Eigenschaften / Electrical properties Charakteristische Werte / Characteristic values Freiwerdezeit circuit commutated turn-off time
Tvj = Tvj max, iTM = ITAVM
= 100 V, v = 0,67 V ThermischevdvEigenschaften /dt = 20 V/µs, -di /dt = 10 A/µs / 4 letter O Mechanische4.Kennbuchstabe Eigenschaften RM
D
Thermische Eigenschaften / Thermal properties Innerer Wärmewiderstand thermal resistance, junction to case
Übergangs-Wärmewiderstand thermal resistance, case to heatsink
DM
tq
typ.
200
µs
max. max. max. max. max. max.
0,088 0,082 0,139 0,133 0,219 0,213
°C/W °C/W °C/W °C/W °C/W °C/W
max. max.
0,015 °C/W 0,030 °C/W 125 °C
DRM
T th
Kühlfläche / cooling surface beidseitig / two-sided, θ = 180°sin beidseitig / two-sided, DC Anode / anode, θ = 180°sin Anode / anode, DC Kathode / cathode, θ = 180°sin Kathode / cathode, DC
RthJC
Kühlfläche / cooling surface beidseitig / two-sides einseitig / single-sides
RthCH
Höchstzulässige Sperrschichttemperatur maximum junction temperature
Tvj max
Betriebstemperatur operating temperature
Tc op
-40...+125 °C
Lagertemperatur storage temperature
Tstg
-40...+140 °C
Mechanische Eigenschaften / Mechanical properties Gehäuse, siehe Anlage case, see annex
Seite 3 page 3
Si-Element mit Druckkontakt Si-pellet with pressure contact Anpresskraft clamping force
F
Steueranschlüsse control terminals
G
typ.
Kriechstrecke creepage distance Schwingfestigkeit vibration resistance
A 513 E2 / 16.02.84
kN
A 2,8x0,8 A 2,8x0,8
Gate Kathode / cathode
Gewicht weight
3...6
70 g 17 mm
f = 50 Hz
A 07/84
50 m/s²
Seite/page
2/10
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T298N
Maßbild
x) Pumpröhrchen (isoliert betreiben!), evacuation pipe (keep insulated!)
1: Anode / Anode
4 5
2: Kathode / Cathode 1
2
4: Gate 5: Hilfskathode/ Auxiliary Cathode
A 513 E2 / 16.02.84
A 07/84
Seite/page
3/10
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
Analytische Elemente des transienten Wärmewiderstandes Z thJC für DC Analytical elements of transient thermal impedance Z thJC for DC
R,t – Werte Diagramme Kühlung / Diagramme Cooling beidseitig two-sided
anodenseitig anode-sided
kathodenseitig cathode-sided
T298N
Pos. n
1
2
3
4
5
6
7
0,00720
0,0190
0,034
0,013
0,0088
-
-
τn [s]
0,00073
0,0144
0,099
0,410
1,1510
-
-
Rthn [°C/W]
0,00720
0,0190
0,034
0,013
0,0598
-
-
τn [s]
0,00073
0,0144
0,099
0,410
1,5100
-
-
Rthn [°C/W]
0,00720
0,0190
0,034
0,013
0,1398
-
-
τn [s]
0,00073
0,0144
0,099
0,410
1,5100
-
-
Rthn [°C/W]
Trans. Wärmewid. beidseitig
ZthJC =
Analytische Funktion / Analytical function:
nmax
ΣR
n=1
thn
1− e
-t
τn
0,25 c
Z thJC [°C/W]
0,20
0,15 a 0,10 b 0,05
0,00 0,001
0,01
0,1
t [s]
1
10
100
Transienter innerer Wärmewiderstand für DC /Transient thermal impedance for DC Z thJC = f(t) a - Anodenseitige Kühlung / Anode-sided cooling b - Beidseitige Kühlung / Two-sided cooling c - Kathodenseitige Kühlung / Cathode-sided cooling
A 513 E2 / 16.02.84
A 07/84
Seite/page
4/10
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T298N
Erhöhung des Zth DC bei Sinus und Rechteckströmen mit unterschiedlichen Stromflusswinkeln Θ Rise of Zth DC for sinewave and rectangular current with different current conduction angles Θ ∆Zth Θ rec / ∆Zth Θ sin
Durchlasskennlinie
Kühlung / Cooling
beidseitig two-sided
anodenseitig anode-sided
kathodenseitig cathode-sided
Θ = 180°
Θ = 120°
Θ = 90°
Θ = 60°
Θ = 30°
∆Zth Θ rec [°C/W]
0,01546
0,02613
0,03518
0,05123
0,08820
∆Zth Θ sin [°C/W]
0,00576
0,00932
0,01452
0,02577
0,06024
∆Zth Θ rec [°C/W]
0,01562
0,02634
0,03542
0,05150
0,08851
∆Zth Θ sin [°C/W]
0,00592
0,00950
0,01474
0,02601
0,06053
∆Zth Θ rec [°C/W]
0,01588
0,02670
0,03582
0,05194
0,08901
∆Zth Θ sin [°C/W]
0,00619
0,00980
0,01510
0,02641
0,06101
Zth Θ rec = Zth DC + ∆Zth Θ rec Zth Θ sin = Zth DC + ∆Zth Θ sin 2.000
iT [A]
1.500
Tvj = Tvj max
1.000
500
0 0,8
1
1,2
1,4
1,6 VT [V]
1,8
2
2,2
2,4
Grenzdurchlaßkennlinie / Limiting on-state characteristic iT = f(vT) Tvj = Tvj max
A 513 E2 / 16.02.84
A 07/84
Seite/page
5/10
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T298N
700
Durchlassverluste90°
600 0°
500 PTAV [W]
180°
180°
0
120°
60° θ = 30°
400 300 200 100 0 0
50
100
150
200
250
300
350
400
450
ITAV [A] Durchlaßverlustleistung / On-state power loss PTAV = f(ITAV) Sinusförmiger Strom / Sinusoidal current Parameter: Stromflußwinkel Θ / Current conduction angle Θ
140 120 0°
0
120°
180°
180°
T C [°C]
100 80 60 40 θ = 30°
60°
90°
20 0
50
100
150
200
250 I TAV [A]
300
350
400
450
Höchstzulässige Gehäusetemperatur / Maximum allowable case temperature TC = f(ITAV) Sinusförmiger Strom / Sinusoidal current Beidseitige Kühlung / Two-sided cooling Parameter: Stromflußwinkel Θ / Current conduction angle Θ
A 513 E2 / 16.02.84
A 07/84
Seite/page
6/10
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T298N
900 DC
800
Tc
700
0°
0
180°
PTAV [W]
600
180° 120°
90°
60° θ = 30°
500 400 300 200 100 0 0
100
200
300
400
500
600
700
ITAV [A]
Durchlaßverlustleistung / On-state power loss PTAV = f(ITAV) Rechteckförmiger Strom / Rectangular current Parameter: Stromflußwinkel Θ / Current conduction angle Θ
140 120 0°
0
180°
T C [°C]
100 80 60 40 θ = 30°
60°
90°
120°
180°
DC
20 0
100
200
300
I TAV [A]
400
500
600
700
Höchstzulässige Gehäusetemperatur / Maximum allowable case temperature TC = f(ITAV) Rechteckförmiger Strom / Rectangular current Beidseitige Kühlung / Two-sided cooling Parameter: Stromflußwinkel Θ / Current conduction angle Θ
A 513 E2 / 16.02.84
A 07/84
Seite/page
7/10
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T298N
100
Steuerkennlinie 10
c
vG [V]
b
Tvj = +25°C
Tvj = +125°C
1
Tvj = -40 °C
a
0,1 10
iG [mA]
100
1000
10000
Steuercharakteristik vG = f (iG) mit Zündbereichen für VD = 12 V Gate characteristic vG = f (iG) with triggering area for VD = 12 V Höchstzulässige Spitzensteuerverlustleistung / Maximum rated peak gate power dissipation PGM = f (tg) : b - 40W / 1ms c - 60W / 0,5ms Zündverzug
a - 20W / 10ms
Qr [µAs]
10000
iTM = 500A 200A
1000
100A 50A 20A
100 1
10
-di/dt [A/µs]
100
Sperrverzögerungsladung / Recovered charge Qr = f(di/dt) Tvj= Tvjmax, vR ≤ 0,5 VRRM, VRM = 0,8 VRRM Parameter: Durchlaßstrom / On-state current iTM
A 513 E2 / 16.02.84
A 07/84
Seite/page
8/10
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T298N
4,5 4 3,5
IT(OV)M [kA]
3 2,5 0-50V
2
0,33 VRRM 1,5
0,67 VRRM
1 0,5 0 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Anzahl Pulse bei 50Hz Sinus Halbwellen Number of pulses for 50Hz sinusoidal half waves
Typische Abhängigkeit des Grenzstromes IT(OV)M von der Anzahl für eine Folge von Sinus Halbwellen bei 50Hz. Parameter: Rückwärtsspannung VRM Typical dependency of maximum overload on-state current IT(OV)M as a number of a sequence of sinusoidal half waves at 50Hz. Parameter: peak reverse voltage VRM IT(OV)M = f (pulses, VRM) ; Tvj = Tvjmax
A 513 E2 / 16.02.84
A 07/84
Seite/page
9/10
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T298N
Nutzungsbedingungen Die in diesem Produktdatenblatt enthaltenen Daten sind ausschließlich für technisch geschultes Fachpersonal bestimmt. Die Beurteilung der Geeignetheit dieses Produktes für die von Ihnen anvisierte Anwendung sowie die Beurteilung der Vollständigkeit der bereitgestellten Produktdaten für diese Anwendung obliegt Ihnen bzw. Ihren technischen Abteilungen. In diesem Produktdatenblatt werden diejenigen Merkmale beschrieben, für die wir eine liefervertragliche Gewährleistung übernehmen. Eine solche Gewährleistung richtet sich ausschließlich nach Maßgabe der im jeweiligen Liefervertrag enthaltenen Bestimmungen. Garantien jeglicher Art werden für das Produkt und dessen Eigenschaften keinesfalls übernommen. Sollten Sie von uns Produktinformationen benötigen, die über den Inhalt dieses Produktdatenblatts hinausgehen und insbesondere eine spezifische Verwendung und den Einsatz dieses Produktes betreffen, setzen Sie sich bitte mit dem für Sie zuständigen Vertriebsbüro in Verbindung (siehe www.eupec.com, Vertrieb&Kontakt). Für Interessenten halten wir Application Notes bereit. Aufgrund der technischen Anforderungen könnte unser Produkt gesundheitsgefährdende Substanzen enthalten. Bei Rückfragen zu den in diesem Produkt jeweils enthaltenen Substanzen setzen Sie sich bitte ebenfalls mit dem für Sie zuständigen Vertriebsbüro in Verbindung. Sollten Sie beabsichtigen, das Produkt in Anwendungen der Luftfahrt, in gesundheits- oder lebensgefährdenden oder lebenserhaltenden Anwendungsbereichen einzusetzen, bitten wir um Mitteilung. Wir weisen darauf hin, dass wir für diese Fälle - die gemeinsame Durchführung eines Risiko- und Qualitätsassessments; - den Abschluss von speziellen Qualitätssicherungsvereinbarungen; - die gemeinsame Einführung von Maßnahmen zu einer laufenden Produktbeobachtung dringend empfehlen und gegebenenfalls die Belieferung von der Umsetzung solcher Maßnahmen abhängig machen. Soweit erforderlich, bitten wir Sie, entsprechende Hinweise an Ihre Kunden zu geben. Inhaltliche Änderungen dieses Produktdatenblatts bleiben vorbehalten.
Terms & Conditions of usage The data contained in this product data sheet is exclusively intended for technically trained staff. You and your technical departments will have to evaluate the suitability of the product for the intended application and the completeness of the product data with respect to such application. This product data sheet is describing the characteristics of this product for which a warranty is granted. Any such warranty is granted exclusively pursuant the terms and conditions of the supply agreement. There will be no guarantee of any kind for the product and its characteristics. Should you require product information in excess of the data given in this product data sheet or which concerns the specific application of our product, please contact the sales office, which is responsible for you (see www.eupec.com, sales&contact). For those that are specifically interested we may provide application notes. Due to technical requirements our product may contain dangerous substances. For information on the types in question please contact the sales office, which is responsible for you. Should you intend to use the Product in aviation applications, in health or live endangering or life support applications, please notify. Please note, that for any such applications we urgently recommend - to perform joint Risk and Quality Assessments; - the conclusion of Quality Agreements; - to establish joint measures of an ongoing product survey, and that we may make delivery depended on the realization of any such measures. If and to the extent necessary, please forward equivalent notices to your customers. Changes of this product data sheet are reserved.
A 513 E2 / 16.02.84
A 07/84
Seite/page
10/10