Convertible Bump Case User s Guide

Curlin BumpCase.fm Page 1 Monday, April 19, 2010 1:28 PM Fujitsu America, Inc. Convertible Bump Case User’s Guide I N S T R U C T I O N S This case ...
Author: Rosalyn Owen
1 downloads 0 Views 1MB Size
Curlin BumpCase.fm Page 1 Monday, April 19, 2010 1:28 PM

Fujitsu America, Inc.

Convertible Bump Case User’s Guide I N S T R U C T I O N S This case is designed to provide a compact, elegant solution for using and transporting your Fujitsu Tablet PC. The convertible bump case is designed so that you can use your system either in notebook or tablet configuration.

Figure 1. Convertible Bump Case

It is important to always latch the display to the base of the system when in tablet made or in closed notebook mode. Be sure to press the latch button prior to attempting to lift the display from the keyboard. Failure to do so could result in damage to the latch.

To open the case, unzip the wraparound zipper (Figure 2) and lift the cover. Open the case so that it lies flat.

Curlin BumpCase.fm Page 2 Monday, April 19, 2010 1:28 PM

Protective Cover

Velcro Flap

D-Rings

Wrap-around zipper

D-Rings

Figure 2. Closed Case (Top)

Before installing the system into the case, remove the pen and pen tether from the system. Re-attach the pen and pen tether to one of the Drings adjacent to the handle, and store the pen in the elastic pen holder ((Figure 3).

Pen holder

2

Figure 3. Location of pen holder

Curlin BumpCase.fm Page 3 Monday, April 19, 2010 1:28 PM

Notebook Configuration To use your system in notebook configuration: 1. Press the latch button and open your Tablet PC so that the display is in notebook configuration. 2. Place the system into the case and tuck the front corners of the keyboard under the clear corner straps. (Figure 4) 3. Pull the top of the case flat against the back of the display and tuck the top corners of the display under the display straps. (Figure 5) Tablet Configuration To use your Tablet PC in tablet configuration: 1.

With your Tablet PC in notebook configuration (as outlined above), fold the top of the case down so the display can rotate without interference. Clear Corner Strap

Clear Corner Strap Figure 4. Putting System in Notebook Configuration

3

Curlin BumpCase.fm Page 4 Monday, April 19, 2010 1:28 PM

Display Strap

Display Strap

Figure 5. Notebook Configuration

4

2.

Rotate the screen (Figure 6) and tuck the corners of the rotated display under the display straps. Before laying the back of the display against the keyboard, be sure to press the latch attachment so that it swivels to the back of the display, allowing it to latch to the system.

3.

Close the case cover and zip up the wraparound zipper.

4.

Undo the Velcro strip #1 securing the protective LCD cover and flip the cover over the back of the case (Figure 7).

5.

Undo the small cover on the back of the case (at the end of the hand strap) to expose the Velcro strip.

6.

Fold the cover three times and secure it with Velcro strip #2 (Figure 7) to stow it out of the way.

Curlin BumpCase.fm Page 5 Monday, April 19, 2010 1:28 PM

Figure 6. Rotating Display

Velcro Strip #2

Protective Cover

Velcro Strip #1 Figure 7. System in Tablet Configuration 5

Curlin BumpCase.fm Page 6 Monday, April 19, 2010 1:28 PM

Shoulder Strap There are D-rings on all four corners of the case. To attach the shoulder strap, open the spring-loaded clips on the end of the strap, and attach them to two of the D-rings. The Drings can also be used as an attachment point for a pen tether. (Figure 2 shows the location of the D-rings.) Caring for the Case The convertible bump case is made of rugged materials, and is designed to withstand daily use. Treat the case as you would a quality briefcase or purse. Occasionally, the case may become soiled. To clean it, brush it with a short-bristled brush. If necessary, use a clean cloth and warm soapy water to wash the soiled area. Do not submerge the case in water, as it may become warped.

6

Curlin BumpCase.fm Page 7 Monday, April 19, 2010 1:28 PM

7

Curlin BumpCase.fm Page 8 Monday, April 19, 2010 1:28 PM

Fujitsu America, Incorporated 1250 E. Arques Avenue, Sunnyvale, CA 94085

For more information, call 1-877-372-3473 or visit our Web site at: http://us.fujitsu.com/computers For technical support call:1-800-8fujitsu (1-800-838-5487) or e-mail us at: [email protected] Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu, Ltd. All other trademarks mentioned herein are the property of their respective owners. Fujitsu America, Inc. has made every effort to ensure the accuracy and completeness of this document. As ongoing development efforts continually improve the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. © 2010 Fujitsu America, Incorporated. All rights reserved. FPC58-2745-01

8