OUTLINE DDK’s PSH2 ultra-compact miniature coaxial connector provides the optimal balance of performance and size. This surface mounted (SMT) RF connector with VSWR performance of 1.3 at DC to 3GHz and VSWR of 1.5 at 3 GHz to 6 GHz and a stacking height of 1.5mm. This low cost connector is suitable for wireless LAN applications Frequency Range
DC to 6GHz Characteristic Impedance
50 Ω
based upon IEEE 802-11a.
FEATURE ・Applicable frequency ranges DC to 3GHz or 3GHz to 6GHz ・Utilizes 50 ohm coaxial cable size of φ 0.81mm
・Compact and uktra-low profile mated height of 1.5mm ・30 mate/demate cycles
・Custom cable lengths available
・Applicable for IEEE 802.11a applications
・Tape and reel package for automated mounting machine ・RoHs Compliant APPLICATIONS ・Wireless LAN, Portable PC, Mobile Phone, Measurement Equipments, Bluetooth. SPECIFICATIONS Characteristic Impedance
50 Ω
Dielectric Withstanding Voltage Insulation Resistance
＊ The specifications are typical but may not apply to all connectors. Please check
PSH2-LP-OD0.81-CR3(L=200mm,both ended hemess） DC to 6GHz VSWR 1.7
1.5
the specifications on each item with its drawing from us when you use.
Receptacle
PSH2 Series
VSWR
1.6 1.5
1.4 1.3 1.2 1.1
1.0 0 1 2 3 4 5 6 Frequency (GHz)
141028
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp
PSH2 Series
PSH2 Series
Unit：mm
○ Receptacle
PSH2-SR-PS
Part Number PSH2-SR-PS-1000
Outer Conductor Finish
Quantity
Au
PSH2-SR-PS-5000
Reel packaging
Au
1000 pcs./ reel 5000 pcs./ reel
※ Tape and reel packaging GND
GND
2.6 1.4 0.5
1.3
1.5
1.3
0.85
Ø1.4
0.6
SIG
SIG
0.5
2
GND
1.7
Pattern Prohibited Area
PCB Monting Dimensions
1.3
1.7
1.85
0.3
RoHS
MATERIAL/ FINISH
Compliant Compliant
Material / Finish
Item
○ Packaging Specifications
Receptacle
Outer Conductor
Copper Alloy / Au Plating
Contact
Copper Alloy / Au Plating
Insulator
Thermoplastic Resin / Black
13.4
18.4 MAX.
◆ Reel Dimensions
◆ Emboss Tape Dimensions 2
Center
φ1.5 Conductor
5.5 12
4
1.75
∅50 MIN.
PSH2-SR-PS-1000：∅178 PSH2-SR-PS-5000：∅330
User direction of feed
8
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp
2
PSH2 Series
Unit：mm
○ Plug Cable Assembly
PSH2-LP-OD0.81-CR3 Applicable Cable
(4.6)
Outer Conductor Finish
Part Number
Dia. φ 0.81
PSH2-LP-OD0.81-CR3
Au
2.1
※ Plug connector is available in only cable assembly.
MATERIAL/ FINISH
Material / Finish
Item
1.3
RoHS
Compliant Compliant
Plug
Outer Conductor
Copper Alloy / Au Plating
Contact
Copper Alloy / Au Plating
Insulator
Thermoplastic Resin / Black
(3.8)
Applicable Cable Size Cable Size O.D. φ 0.81
Center Conductor
Insulator
Outer
Conductor
Cable Dia.
7/0.05（AWG36）
φ 0.4
Single Braid
φ 0.81
Ag Plating
FEP
Sn Plating
FEP
Characteristic Impedance 50 Ω
○ Adapter DMP-SA-PSH2J DMP-SA-PSH2J
8 Hex Dia.
(11.3)
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp
3
Attenuation max.(dB/m) 3GHz
6GHz
6.2
9.4
PSH2 Series
Unit：mm
○ Cable Assembly
基本図番
Ｌ
指定事項
80-076-0009-XXXX-X-X 長さ指定：mm（4桁）
例）200mmの場合は Basic No.
0200と表記します
Ｌ コネクタ角度(表1参照)
ケーブル外被色（FEP)
1：黒色、2：白色
80-076-0009-XXXX-X-X 3：灰色、4：青色 基本図番 指定事項
5：赤色 ※黒色、灰色が標準です
80-076-0009-XXXX-X-X Connectors Angle （Refer to Table 1） 長さ指定：mm（4桁）
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp
4
↓X PSH2 Series
Unit：mm
○ Instruction Manual Pull-off Tool
⇒
When mating the connector, please insert the connector along the center conductor. When unmating the connector, please pull off vertically by using below tool ②Pull off vertically （No.357J-K8035-01）. Excessive torsional mating causes to①Insert be broken.
⇒
Pull-off Tool
⇒
(357J-K8035-01)
② Pull off vertically
⇒ ① Insert
↑2N（Max.)
→4N（Max.) ・Allowable cable load at mating
↑X
Do not add the load more than right figure.
↓2N（Max.)
→2N
↓X
MAX：260℃
260 230 200
Pull-off Tool (357J-K8035-01)
150 100 50
Pre-heating 150～200℃ 60～120sec
⇒
Temperature[℃]
○ Reflow Temperature Profile
230℃ max.② 30～35sec
Pull off vertically
⇒ ① Insert
Time[sec] ※ Above reflow temperature plofile can be fluctuated by sort of the solder paste. Please test the soldering temperature beforehand.
※ The temperature is measured at the terminal area. ※ Reflow cycle is up to twice.
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp
