10_pHyd_1-42.qxd

3/11/07

2:27 PM

Page 1

BRASS FITTINGS TECHNICAL INFORMATION Powder Actuated Systems

Pipe Size:

Pipe Thread 1. Pipe thread is normally tapered. 2. Use the chart to determine the size.

Compression Fittings To identify look at the sleeves and bodies.

Air brake (copper)

Notice the sleeve is rounded.

Air brake (nylon)

The body will have the insert pressed into it. The sleeve has a support machined in the center of it.

Self align

If using plastic tube, an insert must be used.

Compression

If using plastic tube, an insert must be used.

Polyline

Plastic sleeve, has insert machined into the body.

Flare

45˚

Use the chart to determine the size. Brass: Usually has a 45 degree angle cut. It is also called SAE 45. Society of Automotive Engineers Steel: Usually has a 37 degree angle cut.

37˚

It is also called JIC 37. Joint Industrial Conference

Inverted Flare This fitting has a 45 degree chamfer cut on the inside. It is most often used in the automotive industry for the braking systems and the industrial air systems.

45˚

Tube Tube is measured by the outside diameter OD.

Hose Hose is measured by the inside diameter ID.

Pressure Specifications Brass fittings are good for up to 2,000 P.S.I. (Pounds per Square Inch). Depending on the type and size of individual fittings. Steel fittings are good for up to 6,000 P.S.I. Depending on the type and size of individual fittings.

10-1 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_1-42.qxd

3/11/07

2:27 PM

Page 2

BRASS FITTING TECHNICAL INFORMATION Tube Fitting Thread Size Comparison Chart Powder Actuated Systems

This chart gives the thread size for the different fitting styles and sizes. EXAMPLE: Compression fitting with 1/4" tube size has a thread size of 7/16-24.

Tube O.D.\Port size 1/8 Inverted Flare SAE 45˚ Flare Compression Self align Polyline

5/16 -28 5/16 -24 5/16 -24 5/16 -24

Air Brake SAE 37˚ (JIC) Str. Thr’d O-Ring Eremeto® 7000 Ser. FOR-SEAL™

5/16 -24

3/16

1/4

5/16

3/8

7/16

1/2

5/8

3/4

7/8

1

3/8 -24 3/8 -24 3/8 -24 3/8 -24

7/16 -24 7/16 -20 7/16 -24 3/8 -24 7/16 -24 7/16 -20

1/2 -20 1/2 -20 1/2 -24 7/16 -24

5/8 -185/8 -18 9/16 -24 1/2 -24 17/32 -24 9/16 -18

11/16 -18 11/16 -16 5/8 -24

3/4 -18 3/4 -16 11/16 -20 11/16 -20 11/16 -20 3/4 -16

7/8 -18 7/8 -14 13/16 -18

1-1/16 -16 1-1/16 -14 1 -18

1-3/16 -16

1-5/16 -16

13/16 -18 7/8 -14

1 -18 1-1/16 -12

13/16 -16

1 -14

1-3/16 -12

3/8 -24

9/16 -18

1/2 -20

11/16 -16

1-1/4 1-1/2

2

1-1/4 -18

1-1/4 -16 1-3/16 -12

1-5/16 -12

1-5/8 -12

1-7/8 -12

2-1/2 -12

1-7/16 -12

1-11/16 -12

2 -12

2-1/2 -12

To Measure a Pipe Fitting: Measure the diameter of the 1st full thread and subtract 1/4 of an inch. Example: Male thread diameter measures 3/4 of an inch 3/4" - 1/4" = 1/2" Pipe Thread

10-2 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_1-42.qxd

3/11/07

2:27 PM

Page 3

BRASS PIPE FITTINGS Hex Head Plug (Cored)

Pipe thread is always measured by outside diameter (OD) less 1/4". There are many different sizes for pipe so the outside diameter will change. The wall thickness and the process used in making the pipe will determine the amount of pressure a pipe can carry. Brass pipe fittings are measured by pipe thread. They have NPTF male or female threads - a.k.a. “dryseal.” Used with brass, copper, or iron pipe. Weatherhead® is a registered trademark.

Bushing

Weatherhead Utility Price Price Part No. /Each Part No. /Each 440012-131280 $0.40 69904 $0.28 440013-131280 0.57 69905 0.48 440014-131280 0.92 69906 0.88 440015-131280 1.27 69907 1.53 440016-131280 2.49 69908 2.44 69909 8.39

MPT 1/8" 1/4" 3/8" 1/2" 3/4" 1"

Cored plug is standard.

How to Order: To order the premium domestic line of Weatherhead, use the 7 or 13-digit part numbers. To order the utility line, use the 5-digit part numbers.

Hex Head Plug (Solid)

Cap

FPT 1/8" 1/4" 3/8" 1/2" 3/4"

Weatherhead Utility Price Price Part No. /Each Part No. /Each 440001-131280 $0.92 69840 $0.69 440002-131280 1.34 69841 1.20 440003-131280 1.69 69842 1.67 69843 2.07 69844 3.43

MPT 1/8 1/4 3/8 1/2 3/4

Price /Each $0.42 0.62 1.15 1.84 3.41

Part No. 68612 68613 68614 68615 68616

7/8" Taper, Commercial Brass

Square Head Plug (Cored)

T.P.I. 27 27 18 18 14 14

Key Size 5/32 3/16 1/4 5/16 3/8 9/16

Cored plug is standard.

Pkg. Qty. 100 100 100 100 50 50

Wt./100 .50 .80 2.00 4.00 2.90 5.10

Part No. 80742 80743 80744 80745 80746 80747

Price /Each $0.48 0.54 0.81 1.55 2.73 3.52

Hex Countersunk Plug

MPT 1/8 1/4 3/8 1/2 3/4*

Square Head Plug (Solid)

Part No. 68586 68587 68588

Price /Each 0.84 4.83 5.99

Part No. 68590 68591 68592 68593 68594*

Price /Each $0.42 0.69 1.84 1.68 5.69

Locknut

FPT 1/8 1/4 3/8 1/2

Utility Price Part No. /Each 69850 $0.42 69851 0.67 69852 0.63 69853 1.29 69854 1.15 69855 1.18 69856 2.77 69857 3.86 440023-131280 2.45 69858 2.41 440024-131280 1.57 69859 1.49 69362 6.57 69363 5.70 69364 4.82 69860 4.05

Union

Part No. 68597 68598 68599 68600

440034-131280

440029-131280

Weatherhead Vendor Price FPT No. Part No. /Each 1/8" 3300X2 440029-131280 $0.60 1/4" 3300X4 440030-131280 1.00 1/4"x1/8"3300X4X2 440034-131280 1.27 3/8" 3300X6 440031-131280 1.48 3/8"x1/8"3300X6X2 440035-131280 1.69 3/8"x1/4"3300X6X4 440036-131280 1.57 1/2" 3300X8 440032-131280 2.55 1/2 x1/8 1/2 x1/4 1/2"x3/8"3300X8X6 440037-131280 3.27 3/4 3300X12 440033-131280 4.58 3/4 x1/2

*Square countersunk plug. MPT 3/8" 1/2" 3/4"

Weatherhead Price /Each $0.43 0.70 0.70 1.34 1.17 1.21

Part No. 440017-131280 440018-131280 440019-131280 440020-131280 440021-131280 440022-131280

Coupling

Weatherhead

MPT 1/8" 1/4" 3/8" 1/2" 3/4" 1"

Utility Price Price Part No. /Each Part No. /Each 440007-131280 $0.48 69845 $0.48 440008-131280 0.75 69846 0.73 440009-131280 0.99 69847 0.96 440010-131280 1.59 69848 1.54 440011-131280 3.29 69849 3.07 69519 7.52

• 7/8" Taper • Flush steel • Commercial brass Size 1/16 1/8 1/4 3/8 1/2 3/4

FPT 1/8 1/8 1/4 1/8 1/4 3/8 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4

Weatherhead Utility Vendor Price Price MPT No. Part No. /Each Part No. /Each 1/8 68580 $8.03 1/4 3250X4 440026-131280 9.72 68581 9.49 3/8 68582 15.32 1/2 3250X8 440028-131280 16.83 68583 16.50 3/4 68584 23.24

Slotted Plug

Weatherhead Utility Vendor Price Price MPT No. Part No. /Each Part No. /Each 1/8" 3150X2 440004-131280 $0.36 68609 $0.32 1/4" 3150X4 440005-131280 0.51 68610 0.48 3/8" 3150X6 440006-131280 1.35 68611 1.32

MPT 1/4 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 3/4 1 1 1 1

Price /Each $0.54 1.22 1.06 1.37

Utility Price Part No. /Each 69835 $0.54 69836 0.95 69890 0.90 69837 1.39 69891 2.69 69892 1.27 69838 2.51 69252 3.78 69893 69894 69839 69895

2.62 2.15 3.49 3.94

Adapter

Weatherhead Vendor Price FPT MPT No. Part No. /Each 1/8 1/8 3200X2 440038-131280 $0.64 1/4 1/8 3200X4X2 440039-131280 1.34 1/4 1/4 3200X4 440040-131280 1.48 3/8 1/8 3/8 1/4 3200X6X4 440041-131280 1.65 3/8 3/8 3200X6 440042-131280 1.77 1/2 1/4 1/2 3/8 3200X8X6 440043-131280 2.69 1/2 1/2 3/4 3/8 3200X12X6 440044-131280 9.86 3/4 1/2 3200X12X8 440045-131280 6.79

Utility Price Part No. /Each 69896 $0.51 69897 0.85 69898 0.87 69253 1.83 69899 1.54 69900 1.60 69254 2.91 69901 2.55 69902 2.51 69903

3.63

10-3 The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Brass Fittings

Brass Pipe Fittings

10_pHyd_1-42.qxd

3/11/07

2:28 PM

Page 4

BRASS PIPE FITTINGS Brass Pipe Fittings Cont.

Female Cross

Hex Nipple

Brass Fittings

Nipple (Close & Long)

Close Nipple Vendor MPT Length No. Close Nipple 1/8 3326X2 1/4 3326X4 3/8 3326X6 1/2 3326X8 3/4 3326X12 1 Long Nipple 1/8 1-1/2 3327X2 1/4 1-1/2 3327X4 3/8 1-1/2 3327X6 1/2 1-1/2 3/4 1-1/2 1/8 2 3328X2 1/4 2 3328X4 3/8 2 3328X6 1/2 2 3328X8 3/4 2 1/8 2-1/2 3329X2 1/4 2-1/2 3329X4 3/8 2-1/2 3329X6 1/2 2-1/2 3329X8 3/4 2-1/2 3329X12 1/8 3 3330X2 1/4 3 3330X4 3/8 3 3330X6 1/2 3 3330X8 3/4 3 1/8 3-1/2 1/4 3-1/2 3/8 3-1/2 1/2 3-1/2 3/4 3-1/2 1/8 4 1/4 4 3/8 4 1/2 4 3/4 4 1/8 4-1/2 1/4 4-1/2 3/8 4-1/2 1/2 4-1/2 3/4 4-1/2 1/8 1/4 3/8 1/2 3/4 1/8 1/4 3/8 1/2 3/4 1/8 1/4 3/8 1/2 3/4

5 5 5 5 5 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 6 6 6 6 6

Long Nipple Weatherhead Part Price No. /Each 440054-131280 440055-131280 440056-131280 440057-131280 440058-131280

Utility Part Price No. /Each

0.35 0.49 0.73 1.08 3.83

69861 69862 69863 69864 69865 69260

$0.33 0.47 0.71 1.41 3.34 6.08

440059-131280 0.64 440060-131280 1.13 440061-131280 3.24

69866 69870 69874 69261 69262 69867 69871 69875 69879 69263 69868 69872 69876 69264 69265 69869 69873 69877 69729 69266 69267 69268 69269 69270 69271 69272 69273 69878 69274 69275 69276 69277 69278 69279 69280

0.53 0.93 1.52 1.89 2.42 0.88 1.14 1.46 2.38 3.08 1.07 1.26 1.65 2.93 4.93 1.79 3.09 2.79 3.62 6.13 2.74 3.41 4.09 5.65 7.10 3.16 4.03 4.72 6.13 7.77 3.24 4.31 5.13 7.23 8.19

69281 69282 69283 69284 69285 69286 69287 69288 69289 69290 69291 69292 69293 69294 69295

3.53 4.25 5.80 8.29 9.35 3.83 5.20 6.07 8.38 9.75 4.09 5.67 6.42 9.14 11.05

440062-131280 440063-131280 440064-131280 440065-131280

0.90 1.20 2.63 4.67

440067-131280 440068-131280 440069-131280 440070-131280 440071-131280 440072-131280 440073-131280 440074-131280 440075-131280

1.19 3.21 3.90 3.57 5.88 2.71 3.33 4.39 6.87

10-4 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

MPT 1/8 1/4x1/8* 1/4 3/8x1/8* 3/8x1/4* 3/8 1/2x1/4* 1/2x3/8* 1/2 3/4x1/2* 3/4

Weatherhead Part Price No. /Each 440046-131280 $0.57 440051-131280 0.85 440047-131280 0.92 440052-131280 1.77 440053-131280 1.98 440048-131280 1.42

Vendor No. 3325X2 3325X4X2 3325X4 3325X6X2 3325X6X4 3325X6

3325X8

440049-131280

2.83

3325X12

440050-131280

5.39

Utility Part Price No. /Each 69950 $0.48 69247 0.71 69951 0.76 69248 1.18 69249 1.25 69952 1.30 69250 4.38 69984 2.29 69953 2.15 69251 3.87 69954 2.82

Vendor FPT No. 1/8 3950X2 1/4 3950X4 3/8 3950X6 1/2 3950X8 3/4

Weatherhead Utility Price Price Part No. /Each Part No. /Each 440092-131280 $2.75 68575 $2.69 440093-131280 4.09 68576 3.99 440094-131280 8.02 68577 7.57 440095-131280 10.49 68578 10.35 68579 12.38

90° Female Elbow

*Reducing Hex Nipple

45° Street Elbow

FPT 1/8 1/4 3/8 1/2 3/4

MPT 1/8 1/4 3/8 1/2 3/4

Vendor No. 3350X2 3350X4 3350X6 3350X8 3350X12

Weatherhead Price /Each $1.44 1.99 2.65 5.53 10.98

Part No. 440079-131280 440080-131280 440081-131280 440082-131280 440083-131280

Utility Price Part No. /Each 69910 $1.33 69911 1.95 69912 2.58 69913 5.43 69959 10.52

90° Street Elbow

FPT 1/8 1/8 F 1/4

Weatherhead Utility Vendor Price Price No. Part No. /Each Part No. /Each 3500X2 440097-131280 $1.55 68563 $1.50 68564 1.99 3500X4 440098-131280 1.99 68565 1.95

1/4 F 1/4 x1/8 3/8 3500X6 440099-131280 2.99 3/8 F 1/2 3500X8 440100-131280 5.59 1/2 F 1/2 x3/8 3/4 3500X12 440101-131280 8.90 3/4 F

68566 68567 68568 68569 68570 68571 68572 68573 68574

3.36 3.99 2.94 4.35 5.45 6.15 7.69 8.83 12.31

F = Forged

45° Female Elbow

FPT 1/8 1/8 1/8" 1/4 1/4" 1/4 1/4 3/8 3/8 1/2 1/2 3/4

MPT 1/8* 1/8 F* 1/8* 1/8* 1/4* 1/4* 1/4 F* 3/8* 3/8 F* 1/2* 1/2 F* 3/4*

Vendor No. 3400X2 3400X2W 3400X4X2 3400X4W 3400X4 3400X6 3400X8 3400X12

Weatherhead Utility Price Price Part No. /Each Part No. /Each 440084-131280 $0.93 69880 $0.88 69255 2.61 440085-131280 1.46 440086-131280 2.30 440087-131280 2.85 440088-131280 1.59 69881 1.57 69257 3.45 440089-131280 1.85 69882 1.79 69258 3.92 440090-131280 3.95 69883 3.89 69259 5.64 440091-131280 7.29 69884 6.95

FPT 1/8 1/4 3/8 1/2

Part No. 69885 69886 69887 69888

Price /Each $3.82 5.83 6.25 9.21

Street Tee (F x M x F)

F = Forged * May be rounded bottom

90° Male Elbow

MPT 1/8 x1/8 1/4 x1/4 1/4 x1/8 3/8 x3/8 3/8 x1/4 1/2 x1/2 1/2 x3/8

Part No. 68602 68603 68604 68605 68606 68607 68608

Weatherhead

Price /Each $2.28 2.74 3.05 4.53 4.01 5.76 5.27

FPT x Vendor MPT x FPT No. 1/8 3750X2 1/4 3750X4 3/8 3750X6 1/2 3750X8 3/4 3750X12

Utility Price Part Price Part No. /Each No. /Each 440102-131280 $1.55 69955 $1.49 440103-131280 2.75 69956 2.69 440104-131280 3.98 69957 3.95 440105-131280 11.82 440106-131280 19.23

10_pHyd_1-42.qxd

3/11/07

2:28 PM

Page 5

BRASS PIPE FITTINGS & BRASS SAE 45° FLARE Brass SAE 45° Flare SAE 45° Flare fittings offer good working pressures with metal hydraulic tubing that can be flared.

Street Tee (F x M x M)

FPT x MPT x MPT 1/8 1/4

Short Nut (Forged) Works with copper, brass, aluminum and steel hydraulic tubing that can be flared.

Part No. 68617 68618

Price /Each $3.88 5.27

Female Tee

Weatherhead Utility Vendor Price Price FPT No. Part No. /Each Part No. /Each 1/8 3700X2 440107-131280 $1.59 69825 $1.54 1/8 F 69830 2.53 1/4 3700X4 440108-131280 2.42 69826 2.35 1/4 F 69831 3.74 1/4 x1/4 x1/8 69770 4.55 3/8 3700X6 440109-131280 3.49 69827 3.45 3/8 F 69832 5.31 3/8 x3/8 x1/4 69969 8.61 1/2 3700X8 440110-131280 5.55 69828 6.25 1/2 F 69833 8.32 1/2 x1/2 x3/8 0481000 8.69 3/4 3700X12 440111-131280 11.24 69829 10.46 3/4 F 69834 12.30

Tube O.D. 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8

Part No. 67452 67453 67454 67455 67456 67457 67458 67459

Tube O.D. 3/8 1/2 5/8 Price /Each $2.03 0.72 1.15 0.93 1.20 1.80 5.19 11.54

Short Forged Nut (Reducing)

Tube O.D. 1/4 x3/16 3/8 x1/4 3/8 x5/16 1/2 x3/8 5/8 x3/8 5/8 x1/2

Part No. 67460 67462 67463 67464 67465 67466

Price /Each $2.14 1.49 2.74 1.77 6.38 2.70

Long Nut (Machined)

F = Forged

Bulkhead

MPT 1/8 1/4 1/4 3/8 1/2

Length .92 1.5 -

Part No. 67885 67886 67887 67888 67889

Price /Each $4.18 3.85 4.70 6.19 8.73

Male Branch Tee

Vendor Tube O.D. No. 1/8 3/16 41X3 1/4 41X4 5/16 41X5 3/8 41X6 1/2 41X8 5/8 3/4

Weatherhead Utility Price Price Part No. /Each Part No. /Each 69500 $2.13 440124-131280 0.55 69501 0.51 440125-131280 0.53 69502 0.49 440126-131280 0.69 69503 0.66 440127-131280 1.09 69504 1.04 440128-131280 1.89 69505 1.70 69506 3.00 69507 10.03

Short Nut (Machined) MPT 1/8 1/4 3/8 1/2 3/4

FPT 1/8 1/8 3/8 1/2 3/4

Machined Nut (SAE Standard)

Vendor No. 3600X2 3600X4 3600X6 3600X8 3600X12

Part No. 424506-131280 424507-131280 424508-131280 424509-131280 424510-131280

Price /Each $2.27 4.24 6.55 10.80 15.77

Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Vendor No. 1110X2 1110X3 1110X4 1110X5 1110X6 1110X8 1110X10

Part No. 67424 67425 67426

Price /Each $2.66 3.33 3.17

Part No. 67469 67470 67471 67472 67473 67474 67475

Price /Each $1.62 0.30 1.13 0.57 0.80 1.31 6.43

Part No. 67476 67477 67478 67479 67480 67481 67482

Price /Each $3.63 0.45 1.44 0.82 1.47 1.84 9.34

Part No. 67379 67381 67382

Price /Each $6.90 10.91 20.14

Cap

Tube O.D. 3/16 1/4 5/16 3/8 1/2 5/8 3/4

Plug

Tube O.D. 3/16 1/4 5/16 3/8 1/2 5/8 3/4

Cross

Tube O.D. 3/8 1/2 5/8

Tube all ends.

Weatherhead Price /Each $0.46 0.30 0.48 0.82 0.79 1.15 1.99

Part No. 440115-131280 440116-131280 440117-131280 440118-131280 440119-131280 440121-131280 440122-131280

Utility Price Part No. /Each 67430 $0.33 67431 0.27 67432 0.45 67433 0.57 67434 0.70 67437 1.11 67439 1.46 67441 4.69

10-5 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Brass Fittings

Brass Pipe Fittings Cont.

10_pHyd_1-42.qxd

3/11/07

2:28 PM

Page 6

BRASS SAE 45° FLARE Brass SAE 45° Flare Cont.

90° Union Elbow

Male Branch Tee

Brass Fittings

90° Male Elbow

Weatherhead Vendor Price Tube O.D. MPT No. Part No. /Each 1/8 1/8 49X2 440130-131280 $3.35 3/16 1/8 F 3/16 1/8 49X3 440131-131280 1.32 3/16 1/4 1/4 1/8 F 1/4 1/8 49X4 440132-131280 1.18 1/4 1/4 49X4X4 440133-131280 1.39 1/4 1/4 F 1/4 3/8 49X4X6 440134-131280 3.48 1/4 1/2 5/16 1/8 F 5/16 1/8 49X5 440135-131280 1.55 5/16 1/4 F 5/16 1/4 49X5X4 440136-131280 1.69 5/16 3/8 3/8 1/8 49X6X2 440137-131280 2.06 3/8 1/4 F 3/8 1/4 49X6 440138-131280 1.93 3/8 3/8 F 3/8 3/8 440139-131280 2.39 3/8 1/2 49X6X8 440140-131280 3.25 3/8 3/4 1/2 1/4 F 1/2 1/4 49X8X4 440142-131280 3.19 1/2 3/8 F 1/2 3/8 49X8 440143-131280 2.54 1/2 1/2 F 1/2 1/2 49X8X8 440144-131280 3.14 1/2 3/4 5/8 1/4 5/8 3/8 49X10X6 440145-131280 5.16 5/8 1/2 F 5/8 1/2 49X10 440146-131280 3.95 5/8 3/4 3/4 3/8 3/4 1/2 49X12 440147-131280 6.85 3/4 3/4 49X12X12 440148-131280 8.64 7/8 3/4

Utility Price Part No. /Each 69560 $3.29 69556 2.77 69561 1.29 69562 2.33 67341 1.93 69563 1.14 69564 1.36 69557 2.19 69565 2.36 69566 4.09 69558 3.10 69567 1.53 69559 3.06 69568 1.67 69569 3.12 69570 1.99 67364 2.29 69571 1.89 69586 2.64 69572 2.35 69573 2.91 69574 4.65 69587 3.42 69575 3.16 69588 3.16 69576 2.33 69589 3.92 69577 3.07 69578 5.01 69400 6.09 69579 4.08 69406 5.32 69580 3.92 69581 5.89 69453 11.68 69582 6.77 69583 7.73 69584 16.44

Tube O.D. 1/8 3/16 1/4 5/16 3/8 F 3/8 1/2 5/8 3/4

Part No. 67390 67391 67392 67393 67394 67395 67396 67397 67398

Price /Each $3.14 2.94 1.59 2.32 2.93 2.32 3.22 4.20 9.73

F = Forged

90° Female Elbow

Tube O.D. 1/4 3/16 1/4 1/4 5/16 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4

FPT 3/8 1/8 1/8 1/4 1/4 1/8 1/4 F 1/4 3/8 F 3/8 1/2 1/4 3/8 1/2 3/4 3/8 1/2 3/4 1/2 3/4

Vendor No.

50X4 50X4X4

50X6

50X10

Weatherhead Utility Price Price /Each Part No. /Each 67359 $4.01 69590 3.72 440164-131280 1.85 69591 1.82 440165-131280 2.89 69592 2.75 69595 3.17 69596 2.67 69593 3.19 440168-131280 2.79 69597 2.34 69510 2.61 69598 2.29 69599 4.20 69601 4.10 69602 3.36 69603 3.40 69604 4.70 69605 5.82 440172-131280 7.12 69606 4.10 69607 4.86 69608 12.38 69609 16.76 Part No.

Tube O.D. 1/8 3/16 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 3/4 3/4

MPT 1/8 1/8 1/8 F 1/8 1/4 3/8 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4 3/8 1/2 1/2 3/4

Part No. 67483 67484 67485 67486 67487 67488 67489 67490 67491 67492 67493 67494 67496 67497 67498 67499 67500 67501 67502 67503

Price /Each $12.49 3.62 2.64 2.01 2.37 3.71 4.33 3.54 3.33 2.75 3.42 6.04 5.15 4.55 6.29 14.35 7.97 8.29 21.79 13.66

F = Forged

Union Tee

Tube O.D. 1/8 3/16 1/4 F 1/4 5/16 3/8 F 3/8 1/2 5/8 3/4

Part No. 67512 67513 67514 67515 67516 67517 67518 67519

Price /Each $3.16 2.28 2.58 2.25 2.99 3.10 2.17 3.35

67520 67521

4.95 12.91

F = Forged

F = Forged

Male Run Tee

90° Female Flare Swivel Elbow

F = Forged

45° Male Elbow

Tube O.D. 1/4 1/4 5/16 5/16 3/8 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4

Weatherhead Vendor Price No. Part No. /Each 54X4 440149-131280 $1.67 54X4X4 440150-131280 4.09 54X5 440151-131280 2.52

MPT 1/8 1/4 1/8 1/4 1/4 54X6 440152-131280 2.55 3/8 1/2 3/8 54X8 440154-131280 3.48 1/2 54X8X8 440155-131280 6.15 3/8 54X10X6 440156-131280 7.85 1/2 54X10 440157-131280 5.25 1/2 3/4

Utility Price Part No. /Each 69610 $1.55 69611 2.84 69612 2.49 69613 3.17 69614 2.51 69615 3.66 69616 6.75 69617 3.43 69618 6.03 69465 6.66 69619 5.19 69468 8.80 69469 12.56

10-6 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Tube O.D. 1/4 x1/4 3/8 x3/8 1/2 x1/2 5/8 x5/8

Part No. 67417 67418 67419 67420

Price /Each $10.00 14.13 21.38 21.67

Refrigerant Drum Cylinder Valve Adapter

Tube O.D. 1/4 x1/2 1/4 x3/4

Part No. 67422 67423

Price /Each $9.83 7.42

Tube O.D. 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4

MPT 1/8 1/4 3/8 1/8 1/4 1/8 1/4 3/8 1/2 3/8 1/2 3/4 3/8 1/2 1/2 3/4

Part No. 67548 67549 67550 67551 67552 67553 67554 67555 67556 67558 67559 67560 67561 67562 67563 67564

Price /Each $2.26 3.12 4.46 3.84 4.95 3.47 3.50 3.47 6.03 5.47 6.45 18.98 7.07 7.54 21.99 17.08

10_pHyd_1-42.qxd

3/11/07

2:28 PM

Page 7

BRASS SAE 45° FLARE & BRASS INVERTED FLARE FITTINGS

Street Adapter Tee

Tube O.D. 1/4 x1/8

Part No. 67568

Price /Each $3.36

Union

Vendor Tube O.D. No. 3/16 42X3 1/4 42X4 5/16 42X5 3/8 42X6 1/2 42X8 5/8 42X10 3/4 7/8

Weatherhead Price Part No. /Each 440202-131280 1.37 440203-131280 0.68 440204-131280 0.90 440205-131280 1.31 440206-131280 1.79 440207-131280 4.09

Flare Connector

Male Connector

Utility Price Part No. /Each 69521 $1.12 69522 0.62 69523 0.72 69524 1.29 69525 1.77 69526 2.58 69527 5.73 69528 12.92

Reducing Union

Vendor Tube O.D. MPT No. 1/8 1/8 48X2 3/16 1/8 48X3 1/4 1/8 48X4 1/4 1/4 48X4X4 1/4 3/8 1/4 1/2 5/16 1/8 48X5 5/16 1/4 48X5X4 5/16 3/8 3/8 1/8 48X6X2 3/8 1/4 48X6 3/8 3/8 48X6X6 3/8 1/2 48X6X8 3/8 3/4 7/16 1/4 1/2 1/4 48X8X4 1/2 3/8 48X8 1/2 1/2 48X8X8 1/2 3/4 5/8 1/4 5/8 3/8 48X10X6 5/8 1/2 48X10 5/8 3/4 3/4 1/2 48X12 3/4 3/4 48X12X12 7/8 3/4

Weatherhead Price Part No. /Each 440209-131280 $1.18 440210-131280 0.55 440211-131280 0.49 440212-131280 0.71

440213-131280 0.59 440214-131280 0.80 440215-131280 440216-131280 440217-131280 440218-131280

1.04 0.96 1.28 2.42

440220-131280 2.17 440221-131280 1.52 440222-131280 2.06

440223-131280 2.58 440224-131280 1.98 440225-131280 4.29 440226-131280 4.84

Utility Price Part No. /Each 69530 $1.79 69531 0.53 69532 0.48 69533 0.60 69534 0.91 69535 1.80 69536 0.55 69537 0.74 69538 1.72 69539 0.78 69540 0.95 69541 1.17 69542 1.47 69543 2.17 69529 3.86 69544 1.12 69545 1.41 69546 1.65 69547 2.38 69548 4.90 69549 1.79 69550 1.95 69551 2.48 69552 4.15 69553 4.53 69555 10.89

Male Ball Check Connector

Tube O.D. 1/4 3/8 1/2

Part No. 67614 67615 67616

Price /Each $5.11 7.96 10.37

Female Adapter

Tube O.D. 1/4 1/4 3/8 1/2

MPT 1/8 1/4 1/4 3/8

Part No. 67617 67618 67619 67620

Price /Each $7.25 7.18 10.19 9.79

Reducer Connector Flare

Tube O.D. 1/4 x3/8 3/8 x1/4 3/8 x1/2 1/2 x3/8 3/8 x5/8 5/8 x1/2

Part No. 67577 67578 67579 67580 67581 67583

Price /Each $2.56 4.27 3.31 4.05 5.46 5.00

Brass Inverted Flare Fittings Tube O.D. 3/8 x1/4 3/8 x5/16 1/2 x1/4 1/2 x3/8 5/8 x3/8 5/8 x1/2 3/4 x1/2 3/4 x5/8

Part No. 67570 67571 67572 67573 67340 67574 67575 67576

Price /Each $1.13 4.98 3.46 1.68 2.39 2.26 7.41 16.67

Tube Nut Steel Tube O.D. 1/4 3/8

MPT 1/8 1/4

Vendor No. 43X4 43X6

Part No. 440227-131280 440229-131280

Price /Each $4.87 6.17

Female Connector

Tube O.D. 1/8 3/16 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

FPT 1/8 1/8 1/8 1/4 3/8 1/8 1/4 1/8 1/4 3/8 1/2 3/4 1/4 3/8 1/2 3/4 3/8 1/2 3/4 1/2 3/4

Vendor No.

46X4 46X4X4 46X5

46X6 46X6X6

46X8

Weatherhead Utility Price Price /Each Part No. /Each 67630 $2.48 67631 0.84 440231-131280 0.73 67632 0.61 440232-131280 1.48 67587 0.89 67588 3.28 440233-131280 1.15 67589 1.10 67590 1.15 67591 1.04 440236-131280 1.90 67592 1.01 440237-131280 1.15 67593 1.13 67594 1.38 67595 2.49 67596 1.30 440240-131280 2.45 67597 1.31 67598 1.62 67599 2.11 67600 2.14 67601 1.59 67602 4.37 67603 12.92 67604 10.44 Part No.

Inverted flare fittings offer good working pressures with metal hydraulic tubing that can be flared. Seats are threaded and protected. Can be used with copper, brass and steel hydraulic tubing that can be flared.

Vendor Tube O.D. No. 1/8 105X2 3/16 105X3 1/4 105X4 5/16 105X5 3/8 105X6 3/8 (11/16 MPT) 105X6X7 7/16 105X7 1/2 105X8 5/8 105X10 3/4 105X12 7/8 105X14

Weatherhead Price Part No. /Each 440243-131280 $0.42 440244-131280 0.17 440245-131280 0.15 440246-131280 0.18 440247-131280 0.33 440248-131280 2.32 440249-131280 0.58 440250-131280 0.53 440251-131280 1.40 440252-131280 2.03 440253-131280 3.23

Utility Price Part No. /Each 67736 $0.41 67737 0.14 67738 0.14 67739 0.17 67740 0.32

Tube Nut Brass

Vendor Tube O.D. No. 1/8 3/16 100X3 1/4 100X4 5/16 100X5 3/8 100X6 1/2 100X8

Weatherhead Utility Price Price Part No. /Each Part No. /Each 69620 $1.00 440255-131280 0.33 69621 0.32 440256-131280 0.34 69622 0.33 440257-131280 0.35 69623 0.34 440258-131280 0.52 69624 0.51 440259-131280 1.04 69625 0.93

10-7 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Brass Fittings

Brass SAE 45° Flare Cont.

10_pHyd_1-42.qxd

3/11/07

2:28 PM

Page 8

BRASS INVERTED FLARE FITTINGS & BRASS THREADED SLEEVES

Brass Fittings

Brass Inverted Flare Fittings Cont.

Male Connector

Tube Nut (Long Steel)

Tube O.D. 1/8 3/16 1/4 1/4 5/16 5/16 3/8 3/8 3/8 7/16 1/2 1/2 1/2 5/8 3/4 3/4 7/8

Vendor No. 7896X3 7896X4

Tube O.D. 3/16 1/4

Part No. 440260-131280 440261-131280

Price /Each $1.06 1.12

Union

Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2

Vendor No. 302X2 302X3 302X4 302X5 302X6 302X8

Weatherhead Price /Each $1.17 0.69 0.59 0.86 1.18 2.69

Part No. 440262-131280 440263-131280 440264-131280 440265-131280 440266-131280 440267-131280

Utility Price Part No. /Each 69630 $1.12 69631 0.65 69632 0.58 69633 0.70 69634 1.16 69635 6.15

MPT 1/8 1/8 1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/4 1/4 3/8 1/2 1/2 1/2 3/4 3/4

Weatherhead Price No. /Each 440269-131280 $0.35 440270-131280 0.47 440271-131280 0.50 440272-131280 1.29

Utility Part Price No. /Each 69626 $0.35 69627 0.47 69628 0.51 69629 1.25

Union Tee

Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2

Vendor No. 702X2 702X3 702X4 702X5 702X6

Weatherhead Price /Each $4.39 1.98 2.25 3.35 5.15

Part No. 440273-131280 440274-131280 440275-131280 440276-131280 440277-131280

Utility Price Part No. /Each 67744 67745 67746 67747 67748

1.95 2.19 3.30 4.98 9.19

Female Connector

202X12 202X14

Vendor No. 502X4

Price /Each $1.70

Part No. 440307-131280

FPT 1/8 1/8 1/8 1/4 3/8

Weatherhead Vendor Price No. Part No. /Each 252X3 440299-131280 $1.69 252X4 440300-131280 0.94 252X5 440301-131280 2.35

Utility Price Part No. /Each 67749 $1.67 67750 0.93 67751 0.92 67752 1.93 67753 4.28

10-8 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Vendor No. 452X4 452X6

FPT 1/8 1/4

Part No. 440342-131280 440344-131280

Price /Each $2.25 4.70

Part No. 440348-131280

Price /Each $1.98

Male Run Tee

Tube O.D. 1/4

Vendor No. 752X4

MPT 1/8

Male Branch Tee

Tube O.D. 3/16

MPT 1/8

Vendor No. 602X3

Part No. 440352-131280

Price /Each $2.20

1/8 1/8 1/4

602X4 602X5 602X6

440353-131280 440354-131280 440355-131280

3.59 3.42 4.26

Female Branch Tee

90° Male Elbow Tube O.D. 3/16

Tube Vendor O.D. MPT No. 1/8 1/8 402X2 3/16 1/8 402X3 1/4 1/8 402X4 *1/4 1/8 431X4 1/4 1/4 402X4X4 5/16 5/16 3/8 3/8 3/8 1/2 1/2 1/2 5/8 3/4 7/8 1

1/8 1/4 1/8 1/4 3/8 1/4 3/8 1/2 1/2 1/2 3/4 1

402X5 402X5X4 402X6X2 402X6 402X6X6

Weatherhead Utility Price Price Part No. /Each Part No. /Each 440311-131280 $1.59 69648 $1.59 440312-131280 0.83 69649 0.98 440313-131280 0.85 69650 1.16 0440314 2.44 440315-131280 1.59 69651 1.87 440316-131280 440317-131280 440319-131280 440320-131280 440321-131280

0.99 2.39 2.15 2.25 4.51

402X8 440324-131280 402X8X8 440325-131280

3.65 4.92

69652 69653 69655 69656 69669 69657 69658 69659

1.19 2.35 2.25 3.04 4.76 3.59 4.85 9.80

Part No. 440357-131280

Price /Each $5.96

Brass Threaded Sleeves Nut Brass threaded sleeve products are used in lowpressure oil, air, water and lubrication systems. Threaded sleeve is two-piece construction. “DOUBLE COMPRESSION” Tube O.D. 1/8 3/16 1/4

Vendor No. 6100X2 6100X3 6100X4

Part No. 440934-131280 440935-131280 440936-131280

Price /Each $0.43 0.58 0.55

Male Connector

Tube O.D. 1/8 1/8 3/16 1/4

45° Male Elbow

Vendor No. 652X3

MPT 1/8

402X12X8 440328-131280 14.07 402X14 440330-131280 21.26 402X16 440331-131280 24.97

* .062 restricted orifice Tube O.D. 3/16 1/4 5/16 3/8 1/2

Tube O.D. 1/4 3/8

1/4 5/16 3/8 Tube O.D. 1/4

Vendor No. 131X3 131X4 131X5 131X6

202X8X4 202X8 202X8X8 202X10

Weatherhead Utility Price Price /Each Part No. /Each $1.45 0.39 69636 0.39 0.45 69637 0.43 0.79 69638 0.75 0.52 69639 0.50 0.72 69640 0.70 1.07 69641 1.04 0.95 69642 0.94 1.35 69643 1.32 69644 3.20 440290-131280 5.53 440291-131280 1.85 69511 1.69 440292-131280 1.95 69645 1.90 440293-131280 4.31 69646 3.43 69647 9.00 440295-131280 7.54 440296-131280 16.62

Part No. 440280-131280 440281-131280 440282-131280 440283-131280 440284-131280 440285-131280 440286-131280 440287-131280 440288-131280

90° Union Elbow

Plug (Steel)

Tube O.D. 3/16 1/4 5/16 3/8

Vendor No. 202X2 202X3 202X4 202X4X4 202X5 202X5X4 202X6X2 202X6 202X6X6

90° Female Elbow

MPT 1/8 1/4-28 1/8 1/8

Vendor No. 6200X2 6200X2X21 6200X3 6200X4

Part No. 440941-131280 440942-131280 440943-131280 440944-131280

Price /Each $0.49 1.10 0.97 0.73

Part No. 440947-131280 440948-131280 440949-131280 440950-131280

Price /Each $2.94 2.43 3.77 3.72

Male Elbow Tube Vendor O.D. MPT No. 3/16 1/8 352X3 1/4 1/8 352X4 5/16 1/8 352X5 5/16 1/4 3/8 1/4 352X6 1/2 3/8

Weatherhead Price Part No. /Each 440333-131280 $1.89 440334-131280 1.95 440335-131280 2.49

Utility

Price Part No. /Each 67759 $3.45 67760 1.92 67761 2.49 67762 3.77 440338-131280 3.72 67763 3.72 67764 6.03

Tube O.D. 1/8 1/8 3/16 1/4

MPT 1/8 1/4-28 1/8 1/8

Vendor No. 6400X2 6400X2X21 6400X3 6400X4

10_pHyd_1-42.qxd

3/11/07

2:28 PM

Page 9

NEEDLE & SPECIAL DUTY VALVES Compression Double

Female to Male Pipe

Typical Applications Instrumentation, Hydraulic, and Pneumatic systems.

Advantages Metal-to-Metal seat, with fine thread screw down, enables valves to seat positively, adjust easily and hold to any amount of flow up to capacity of the valve.

Pressure 150 psi maximum. (Does not include plastic tubing)

FPT 1/8 1/4

MPT 1/8 1/4

Part No. 68759 68760

Price /Each $6.24 11.92

Tube O.D. 1/4 1/4 5/16 3/8

MPT 1/8 1/4 1/8 1/4

Part No. 68762 68763 68764 68765

Price /Each $8.02 9.82 10.75 14.10

-65°F to +250°F (-53°C to + 121°C). Valves -40°F to +150°F (-40°C to +66°C) with plastic sleeve. (Refer to tubing temperature range.)

Conformance

Assembly Instructions Install with the pressure against the seat. Inspection of a straight valve discloses one opening to be higher than the other. Pressure should always be directed against the seat in angle valves, not the stem threads.

Tube O.D. 1/4 5/16 3/8

MPT 1/8 1/4 1/4

Part No. 68766 68769 68770

Price /Each $5.49 11.73 10.25

Part No. 68771 68772 68774

Price /Each $7.10 9.52 12.77

SAE 45° Flare Straightaway

Female Pipe Tube O.D. 1/4 1/4 3/8 FPT 1/8 x1/8 1/4 x1/4

Price /Each $6.57 9.52

Part No. 68750 68751

MPT 1/8 1/4 1/4

SAE 45° Flare Double

Compression Angle

Tube O.D. 3/16 1/4 1/4 5/16 5/16 3/8 3/8

MPT 1/8 1/8 1/4 1/8 1/4 1/8 1/4

Part No. 68752 68753 68754 68755 68756 68757 68758

Price /Each $11.36 5.28 10.02 10.14 19.03 6.11 12.90

MPT 1/8 1/4

Vendor No. A690P A6760P

Part No. 440740-131280 440741-131280

Price /Each $24.65 28.88

Vendor No. A555P A556P A6860P

Part No. 440742-131280 440743-131280 440744-131280

Price /Each $16.61 17.02 19.78

Polyline Angle

POLYLINE®

Designed for automotive and industrial use. Not intended for natural gas, LPG, nuclear or aircraft applications.

Polyline Rightway Tube O.D. 1/4 3/8

SAE 45° Flare Angle

Temperature Range

Price /Each $4.70 10.07 5.84

Needle Valves

Brass bodies and steel handles, except where noted. POLYLINE® valves have brass bodies and brass handles.

Copper, aluminum, steel and plastic tubing where applicable. When using POLYLINE® valves, use aluminum and copper tubing with brass sleeve only. Plastic tubing may be used with either brass or plastic sleeve.

Part No. 68778 68779 68780

Compression Straightway

Material

Used With

Tube O.D. 1/4 x1/4 5/16 x5/16 3/8 x3/8

Tube O.D. 1/4x1/4 3/8 x3/8

Part No. 67334 68775

Price /Each $10.10 8.50

Tube O.D. 1/4 1/4 3/8

MPT 1/8 1/4 1/4

Special Duty Valves Information • Forged bodies, solid bottom, spring loaded top • Neoprene “O” ring seal, steel cad plated handles • Individually ground plugs • Valves are packed with a non-drying, synthetic grease • Use with copper, aluminum, steel and plastic tubing where applicable • Used for low pressure applications where a quick on and off operation is desired with a generous flow. • 30 psi • Solid bottom and O-ring seal prevents leakage to and from the atmosphere • Use on fuel oil, water, gas, air and LP gas • Compression valves are complete with nuts and sleeves

Flare to MPT

Male Pipe (Double) Tube O.D. 1/4 1/4 3/8 3/8 MPT 1/8x1/8 1/4x1/4

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Part No. 68776 68777

MPT 1/8 1/4 1/4 3/8

Part No. 69978 69979 69990 69982

Price /Each $17.61 17.00 18.28 20.09

Price /Each $10.19 9.05

10-9 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Brass Fittings

Needle Valves

10_pHyd_1-42.qxd

3/11/07

2:29 PM

Page 10

SPECIAL DUTY, SPECIAL SERVICE VALVES & DRAIN COCKS Special Duty Valves Cont. Flare to Flare Brass Fittings

Tube O.D. 1/4 x1/4 3/8 x3/8 1/2 x1/2

Part No. 68791 68793 68794

Price /Each $17.79 24.24 16.38

Special Service Valves and Drain Cocks

Draincock

Drain Cocks and Drain Valves have been a specialty with Weatherhead since 1919. Millions are in use. The original design has proved so efficient that it is still the leader with most original equipment manufacturers. The metal-to-metal seat requires only hand tightening to assure positive leak-proof performance.

FPT 1/4 x1/4 3/8 x3/8

Part No. 68796 68797

Price /Each $23.68 18.76

Brass bodies and steel handles, except where noted.

Material

Used With

Pressure

Copper, aluminum, steel, hose and plastic tubing where applicable.

30 psi working pressure, except where noted.

Temperature

Copper, aluminum, steel and plastic tubing where applicable.

Brass bodies and handles.

-65°F to +250°F (-53°C to +121°C). (Refer to tubing temperature range.)

Internal Seat

MPT 1/8 x1/8 1/4 x1/4

Part No. 68798 68799

FPT to MPT

MPT 1/8 1/4 3/8

Used With

Temperature -40°F to +250°F (-53°C to +121°C). (Refer to tubing temperature range.)

Designed for automotive or industrial use. Not intended for natural gas, LPG, nuclear or aircraft applications, except as noted.

Price /Each $16.81 24.47

Price /Each $9.87 15.24

Ground Plug and Multiple Shut-Offs

150 psi maximum (does not include hose or plastic tubing).

Conformance

MPT to MPT

Part No. 68856 68857

Material

Pressure

FPT to FPT

MPT 1/8 1/4

Conformance Designed for automotive or industrial use. Not intended for natural gas, LPG, nuclear or aircraft applications, except as noted.

Note

Part No. 68848 68849 68850

Price /Each $6.12 5.64 7.11

Ground Plug Drains and Shut-Offs use a universal lubricant satisfactory for use with most common fluids. However, the lubricant may wash out at higher pressures or with some exotic fluids.

Ground Plug Drain

Angle Bib Drain

FPT 1/8 1/4 3/8

MPT 1/8 1/4 3/8

Part No. 68801 68802 68803

Price /Each $22.86 20.09 25.35

MPT 1/4

Hose I.D. 3/8

Part No. 68851

Price /Each $5.81

MPT 1/8 1/4 3/8 1/2

Part No. 69960 69961 69962 69963

Price /Each $10.09 10.53 17.42 18.93

4-Way Multiple Shut-Off Internal Seat Drain Valve

MPT 1/8 1/4 3/8

Part No. 68852 0467777 0467778

Price /Each $3.95 3.44 4.24

FPT 1/4 1.37" STEM

Part No. 68804

Price /Each $27.29

3-Way Multiple Shut-Off

External Seat

MPT 1/8 1/4 3/8 1/2

10-10 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 68853 68854 68855 0449032

Price /Each $2.13 1.73 5.42 11.88

FPT 1/8 1/4 3/8

Part No. 68806 68807 68808

Price /Each $32.63 35.07 41.80

10_pHyd_1-42.qxd

3/11/07

2:29 PM

Page 11

BRASS VALVES & BRASS MINI-BARB FITTINGS A-lign Needle Valves

MPT to MPT

A-lign to A-lign

MPT 1/8 x1/8 1/4 x1/4 3/8 x3/8

Price /Each $12.63 10.65 16.53

Part No. 68826 68827 68828

Tube O.D. 1/4

Part No. 68877

Female Branch Tee

Price /Each $6.29

Brass Mini-Barb Fittings

Tube O.D. 1/4

Vendor No. 1077X4

FPT 1/8

Part No. 441342-131280

Price /Each $3.33

Male Connector

Female Pipe Union Tee

FPT 1/8 x1/8 1/4 x1/4 3/8 x3/8

Price /Each $11.34 13.52 18.96

Part No. 69964 69965 69966

Male to Female Pipe

MPT 1/8 1/4 3/8

FPT 1/8 1/4 3/8

Price /Each $8.65 8.98 18.88

Part No. 68829 68830 68831

Special Service Drain and Truck Valves Barrel Faucet Self-Closing, Zinc Body, Nylon Seat

MPT 3/4

The Mini-Barb is a clampless connector of Polyethylene tubing.

Tube O.D. 1/4 3/8 x3/8 x1/4 3/8 3/8 x1/2 x3/8 1/2 x1/2 x1/4 1/2 x1/2 x3/8 1/2

Vendor No. 1064X4 1064X6X6X4 1064X6 1064X6X8X6 1064X8X8X4 1064X8X8X6 1064X8

Part No. 441325-131280 441326-131280 441327-131280 441328-131280 441329-131280 441330-131280 441331-131280

Price /Each $2.08 2.25 2.03 3.01 3.40 2.97 3.41

Plug

Tube O.D. 1/4 3/8

Vendor No. 1073X4 1073X6

Part No. 441344-131280 441345-131280

Price /Each $0.66 1.83

Tube O.D. 5/32 1/4 1/4 1/4 3/8 3/8 1/2

MPT 1/8 1/16 1/8 1/4 1/8 1/4 3/8

Vendor No. 1068X2.5X2 1068X4X1 1068X4 1068X4X4 1068X6X2 1068X6 1068X8

Part No. 441358-131280 441359-131280 441360-131280 441361-131280 441362-131280 441363-131280 441365-131280

Price /Each $1.85 1.01 0.90 1.70 1.12 2.11 3.59

Part No. 441377-131280 441378-131280 441379-131280 441380-131280 441381-131280 441382-131280

Price /Each $1.99 1.50 2.13 2.25 3.24 6.41

90° Male Elbow

Tube O.D. 1/4 1/4 1/4 3/8 3/8 1/2

MPT 1/16 1/8 1/4 1/8 1/4 3/8

Vendor No. 1069X4X1 1069X4 1069X4X4 1069X6X2 1069X6 1069X8

Female Connector

Male Branch Tee Price /Each $15.43

Part No. 68864

Tube O.D. 1/4 3/8 3/8

Pipe To Hose Shut-Off Brass Body

MPT 1/8 1/8 1/4

Vendor No. 1072X4 1072X6X2 1072X6

Part No. 441338-131280 441339-131280 441340-131280

Price /Each $2.49 2.52 3.98

Tube O.D.

FPT

Vendor No.

Part No.

Price /Each

1/4 1/4

1/8 1/4

1066X4 1066X4X4

441367-131280 441368-131280

$1.94 4.13

Part No. 441384-131280 441386-131280 441387-131280

Price /Each $2.26 3.36 3.82

90° Female Elbow

Union Tube O.D. 3/8 1/2 5/8 3/4 3/4

MPT 3/8 3/8 3/8 3/8 1/2

Part No. 69970 69240 69971 69241 69973

Price /Each $15.51 16.91 14.91 24.41 29.57

Oil Tank Valve MPT to FPT

Tube O.D. 1/4 x3/16* 1/4 1/4 3/8 x1/4 3/8 1/2 x3/8 1/2

Vendor No. 1062X4X3 1062X4 1062X4L 1062X6X4 1062X6 1062X8X6 1062X8

Part No. 441348-131280 441349-131280 441350-131280 441351-131280 441352-131280 441354-131280 441355-131280

Price /Each $1.80 1.11 1.58 1.66 0.68 2.01 2.14

Tube O.D. 1/4 3/8 3/8

FPT 1/8 1/8 1/4

Vendor No. 1070X4 1070X6X2 1070X6

Compression Connector Compression size is 1/4" O.D.

*No barb on 3/16" end. L = Long Union

Tube O.D. 1/2

MPT 1/2

FPT 3/8

Part No. 68871

Price /Each $17.43

Tube O.D. 3/16 x1/4 comp* 1/4 x1/4 comp

Vendor No. 1078X3X4 1078X4X4

Part No. 441372-131280 441373-131280

Price /Each $2.38 2.50

*No Barb on 3/16" end. The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

10-11 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Brass Fittings

Ground Plug Valves

10_pHyd_1-42.qxd

3/11/07

2:29 PM

Page 12

BRASS MINI-BARB FITTINGS, BRASS HOSE BARB FITTINGS Brass Fittings & Hose Barb Fittings

Brass Mini-Barb Fittings Cont.

Female Hose Barb

90° Union Elbow

Hose I.D. 1/8 3/8 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2

Tube O.D. 1/4 3/8 1/2

Vendor No. 1065X4 1065X6 1065X8

Part No. 441389-131280 441390-131280 441391-131280

Price /Each $1.63 1.89 2.80

Bulkhead Union

Hose Barb to Female 45° SAE Flare Swivel

FPT 1/8 1/8 1/8 1/4 3/8 1/8 1/4 3/8 1/8 1/4 3/8 1/2 3/8 1/2

Part No. 68668 68669 68670 68671 68672 68673 68674 68675 68676 68677 68678 68679 68680 68681

Price /Each $1.46 1.27 1.02 1.26 1.78 2.70 1.64 3.48 1.46 1.27 1.69 2.18 2.14 2.40

Female Hose Barb to Swivel Ball End Tube O.D. 1/4 3/8

Thread 5/16-24 3/8-24

Vendor No. 1074X4 1074X6

Part No. 441374-131280 441375-131280

Price /Each $4.03 5.73

Bulkhead Comp Connector

Tube O.D. 1/4 x1/4

Vendor No. 1067X4X4

Part No. 441392-131280

Price /Each $3.95

Brass Hose Barb Fittings Male Hose Barb

MPT 1/8 1/8 1/4 1/8 1/4 3/8 1/2 1/8 1/4 3/8 1/8 1/4 3/8 1/2 3/4 1/4 3/8 1/2 3/4 3/8 1/2 3/4 1/2 3/4 3/4 1

Hose I.D. 1/8 3/16 3/16 1/4 5/16 3/8 3/8 1/2 1/2 3/4

Thread 1/8 FSM 1/8 FSM 1/4 FSM 1/4 FSM 1/4 FSM 1/4 FSM 3/8 FSM 3/8 FSM 1/2 FSM 3/4 FSM

Part No. 68682 68683 68684 68685 68686 68687 68688 68689 68690 68691

Price /Each $1.52 1.71 1.66 1.26 1.27 1.29 1.73 2.28 2.77 4.29

Male Swivel Ball Adapter

Brass hose barb fittings are designed for use with a hose clamp or a crimped ferrule on low-pressure air lines. Hose I.D. 1/8 3/16 3/16 1/4 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 1 1

Female Straight Mechanical (FSM)

Part No. 69917 69918 69919 69920 69921 69922 69923 69924 69925 69926 69927 69928 69929 69930 69977 69931 69932 69933 69934 69935 69936 69937 69938 69939 69940 69941

Price /Each $0.75 0.79 0.97 0.71 0.88 1.22 3.12 0.88 0.83 1.48 1.21 1.33 1.33 1.99 2.75 1.21 1.60 1.87 3.16 1.56 2.00 2.74 2.17 2.94 3.76 7.09

10-12 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

MPT 1/4 x1/8 1/4 x1/4 3/8 x1/4 3/8 x3/8 1/2 x3/8 1/2 x1/2

Part No. 68692 68693 68694 68695 68696 68697

Price /Each $1.41 0.94 2.66 4.34 3.09 4.59

Use with 209AS

Hose Barb Female Swivel 37° JIC Flare

MPT 3/16 x3/16 1/4 x3/8 5/16 x3/8 3/8 x3/8

Part No. 67176 67177 67178 67179

Price /Each $1.15 1.20 1.41 1.74

Hose I.D. 1/4 1/4 5/16 3/8 3/8 1/2

Tube O.D. 1/4 3/8 5/16 3/8 1/2 1/2

Price /Each $1.35 1.77 2.41 1.72 3.15 2.75

Part No. 68698 68699 68700 68701 68702 68703

Brass Ferrules and Hand Crimping Vice For Crimping Industrial Air Hose Brass Ferrules for use with hose barb fittings. Make sure ferrule closely matches hose O.D. Use the 5229-CV500 crimper. Hose I.D. .525 .562 .593 .625 .656 .687 .718 .750 .900 1.110

Price /Each $0.30 0.37 0.40 0.40 0.42 0.50 0.56 0.57 0.43 0.49

Part No. 03093716542 03093716543 03093716544 03093716545 03093716546 03093716547 03093716548 03093716549 0429999 0429998

Heavy-Duty Ferrule Crimping Machine • Low cost, portable and self-contained • Allows for fitting/repairing most popular hose sizes without changing dies • One-hand operation, rugged • Instant die selection • Crimps 1/4" to 3/8" I.D. hose in 1 or 2 braid design • Furnished with mounting holes for permanent installations or use it as a portable tool for hose assembly in the field Price /Each $164.37

Part No. 5229-CV500

Hose Barb to Male 45° SAE Flare

Hose I.D. 1/4 1/4 5/16 3/8 1/2

Tube O.D. 1/4 3/8 5/16 3/8 1/2

Part No. 68715 68717 68718 68719 68720

Price /Each $1.43 1.23 4.50 1.37 3.16

10_pHyd_1-42.qxd

3/11/07

2:29 PM

Page 13

BRASS HOSE BARB FITTINGS, BRASS BARB-TITE/PUSH-ON HOSE FITTINGS Male 90° Elbow Hose Barb

45° Male Elbow

Hose Mender/Splicer

Hose I.D. 3/16 1/4" 5/16 3/8" 1/2" 5/8" 3/4"

Hose I.D. 1/4 5/16 5/16 3/8 3/8 3/8 1/2 1/2 5/8

Price /Each $1.09 1.26 1.28 1.29 1.63 2.11 3.14

Part No. 69985 69986 69987 69988 69989 67196 67197

MPT 1/8 1/8 1/4 1/8 1/4 3/8 1/4 3/8 3/8

Part No. 68704 68705 68706 68707 68708 68709 68710 68711 68712

Price /Each $3.05 2.21 2.60 3.49 3.03 3.84 3.98 3.61 3.54

Hose I.D. 1/4 1/4 5/16 3/8 3/8 1/2 5/8 5/8

The Barb-Tite/Grip-On hose fitting is designed for use with low-pressure air, lube or oil lines. The fitting pushes directly onto the hose. No clamp, ferrule or crimping is needed. Other trade names for this hose fitting include: Push-Lok, Lock-On and Socketless. Parts are reusable. How to Order: To order the premium domestic line of Weatherhead, use the 13digit part numbers. The 5-digit part numbers are a mix of other companies that make up our utility line. Weatherhead compatible hoses are H100, H101, H201 and H332.

Male Pipe (Rigid) Weatherhead Vendor No. 10004B-102 10004B-104 10005B-102 10005B-104 10006B-102 10006B-104 10006B-106 10008B-106 10008B-108 10010B-108 10012B-112

MPT 1/8-27 1/4-18 1/8-27 1/4-18 1/8-27 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14

Part No. 441462-131280 441463-131280 441464-131280 441465-131280 441466-131280 441467-131280 441468-131280 441469-131280 441470-131280 441471-131280 441472-131280

Utility Price /Each $1.38 1.48 2.59 2.86 2.25 2.25 2.31 3.99 4.19 4.65 7.94

Price /Each $1.02 1.15 1.65 1.57 1.39 1.90 1.61 3.90 4.15 4.52 7.62

Part No. 68523 68524 67198 67199 67268 68525 68526 68527 68528 68529 68530

SAE 45° Male Flare (Rigid)

Weatherhead Hose I.D. 1/4 1/4 5/16 3/8 1/2

Tube O.D. 1/4 5/16 5/16 3/8 1/2

Vendor No. 10004B-304 10004B-305 10005B-305 10006B-306

Part No. 441473-131280 441474-131280 441475-131280 441476-131280

Price /Each $1.76 2.59 3.32 2.76

Utility Part No. 68531 68532

Price /Each $1.49 2.16

MPT 1/8 1/4 1/8 1/4

Vendor No. 10005B-C02 10005B-C04 10006B-C02 10006B-C04

Hose I.D. 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 1/2 5/8

Tube O.D. 3/16 1/4 5/16 1/4 5/16 3/8 5/16 3/8 1/2 5/8

No. 10004B-B03 10004B-B04 10004B-B05 10005B-B04 10005B-B05 10005B-B06 10006B-B05 10006B-B06 10008B-B08

Weatherhead Vendor Part No. /Each 441481-131280 $2.53 441482-131280 2.41 441483-131280 2.64 441484-131280 4.42 441485-131280 3.07 441486-131280 5.83 441487-131280 2.76 441488-131280 3.15 441489-131280 3.81

1.82 7.61

Part No. 441477-131280 441478-131280 441479-131280 441480-131280

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Utility Price Price Part No. /Each 68545 $2.25 68546 1.65 68547 2.52

68548

3.09

68550

5.98

Inverted Female (Rigid)

Weatherhead Hose I.D. 1/4 1/4 1/4 5/16 3/8 3/8 1/2

Tube Size 3/16 1/4 5/16 5/16 5/16 3/8 1/2

Vendor No. 10004B-A03 10004B-A04 10004B-A05 10005B-A05 10006B-A05 10006B-A06 10008B-A08

Part No. 441490-131280 441491-131280 441492-131280 441493-131280 441494-131280 441495-131280 441496-131280

Utility Price /Each $1.98 1.84 2.05 4.56 2.89 2.54 5.56

Part No. 68551 68552 68553

Price /Each $1.75 1.62 1.87

67269 67270 68554

2.84 1.95 4.75

SAE 37° (JIC) Female (Swivel) Weatherhead

68533 68534

90° Male Pipe (Rigid Elbow)

Hose I.D. 5/16 5/16 3/8 3/8

Price /Each $1.96 2.64 2.13 2.13 2.56 3.54 2.87 3.82

Part No. 69942 69943 69944 69945 69946 69947 69948 69949

Inverted Male (Swivel)

Brass Barb-Tite/Push-on Hose Fittings

Hose I.D. 1/4 1/4 5/16 5/16 3/8 3/8 3/8 1/2 1/2 5/8 3/4

Thread 1/8 1/4 1/4 1/4 3/8 3/8 3/8 1/2

Hose I.D. 1/4 5/16 3/8 1/2 5/8 3/4

Tube O.D. 1/4 5/16 3/8 1/2 5/8 3/4

Vendor No. 10004B-604 10005B-605 10006B-606 10008B-608 10010B-610 10012B-612

Part No. 441497-131280 441498-131280 441499-131280 441500-131280 441501-131280 441502-131280

Utility Price /Each $2.99 3.72 4.75 6.10 9.86 14.25

Part No.

Price /Each

68557

4.75

68558

8.55

Price /Each $5.15 5.04 6.21 4.69

10-13 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hose Barb Fittings

Brass Hose Barb Fittings Cont.

10_pHyd_1-42.qxd

3/11/07

2:29 PM

Page 14

BRASS BARB-TITE, SS HOSE BARB & BRASS COMPRESSION Brass Barb-Tite/Push-on Hose Fittings Cont.

Compression Fittings

SAE 45° Flare Female (Swivel)

Hose I.D. 1/4 3/8 1/2 Weatherhead

Hose I.D. 3/8 3/4

Tube O.D. 3/8 3/4

Vendor No. 10006B-406 10012B-412

Female Pipe (Swivel)

Part No. 441507-131280 441510-131280

Utility Price /Each 2.98 8.97

Part No. 68555 68556

Price /Each $2.70 7.55

Vendor No. 10004B-254 10006B-256 10008B-258

FPT 1/4 3/8 1/2

Price /Each $5.10 9.55 11.13

Part No. 441511-131280 441512-131280 441513-131280

Rigid Tube Shank (Straight) Weatherhead Hose I.D. 1/4 1/4 1/4 3/8 1/2

45°/ 37° Female Dual Angle Seal (Swivel)

Tube O.D. 3/16 1/4 5/16 3/8 1/2

Vendor No. 10004B-X03 10004B-X05 10004B-X05 10006B-X06

Utility Price /Each $1.98 2.29 2.74 3.15

Part No. 441514-131280 441515-131280 441516-131280 441518-131280

Part No. 68535 68536 68537 68538 68539

Price /Each $1.77 2.16 1.95 2.78 2.05

Hose Mender/Splicer Hose I.D. 1/4 1/4 1/2 5/8 5/16 3/8

Thread 1/4 5/16 1/2 5/8 5/16 1/2

Price /Each $1.32 6.06 2.57 5.60 1.73 3.86

Part No. 68559 68560 68561 68562 65316 65317

Stainless Steel Hose Barbs

Hose I.D. 1/4 5/16 3/8 1/2 5/8

Vendor No. 10004B-Y04 10005B-Y05 10006B-Y06 10008B-Y08

Weatherhead Price Part No. /Each 441519-131280 $2.67 441520-131280 3.76 441521-131280 3.16 441522-131280 4.89

Utility Part No. 68541 67271 68542 68543 68544

Price /Each $1.77 1.45 2.74 4.53 6.40

Nut

Compression Sleeve

Straight Beaded Hose Stem Tube O.D. 1/4 3/8 3/8 1/2 1/2 1/2 3/4 1

NPTF 1/4 1/4 3/8 1/4 3/8 1/2 3/4 1

Price /Each $21.16 18.92 21.96 14.73 18.42 29.55 45.03 55.72

Part No. 426199 426200 426201 426202 426203 426204 426205 426206

Brass Compression Fittings (Standard)

Vendor Tube O.D. No. 1/8 60X2 3/16 60X3 1/4 60X4 5/16 60X5 3/8 60x6 7/16 60X7 1/2 60X8 1/2* 5/8 5/8* 3/4 7/8*

Weatherhead Price Part No. /Each 440372-131280 $0.11 440373-131280 0.12 440374-131280 0.11 440375-131280 0.09 440376-131280 0.12 440377-131280 0.29 440378-131280 0.21

60X10 440379-131280 0.49

Utility Price Part No. /Each 69670 $0.09 69671 0.09 69672 0.11 69673 0.08 69674 0.12 69675 0.27 69676 0.19 69514 69677 69515 69678 69679

0.44 0.23 0.46 0.49 0.61

WH Vendor Tube O.D. No. 1/8 61X2 3/16 61X3 1/4 61X4 5/16 61X5 3/8 61X6 7/16 61X7 1/2 61X8 1/2* 5/8 61X10 3/4 7/8

Part No. 440382-131280 440383-131280 440384-131280 440385-131280 440386-131280 440387-131280 440388-131280 440389-131280

Utility Price Part No. /Each 69680 $0.16 69681 0.21 69682 0.25 69683 0.27 69684 0.30 69685 0.79 69686 0.55 69516 1.38 0.66 69687 0.65 69688 1.77 69689 1.54

Price /Each $0.17 0.22 0.25 0.29 0.29 0.92 0.59

*Heavy Pattern

*Wide Sleeve

Tube Support For Plastic Tubing Compression fittings are popular 3-piece flareless fittings for metal and plastic tubing. Insert is only used on PT200 and PT2400, not PT230 (Nylon 6/6). Vendor Tube O.D. No. 1/4* 2030X44 1/4** 2030X4 5/16 2030X5 3/8 2030X6 1/2 2030X8 5/8 2030X10 3/4 2030X12

Weatherhead Price Part No. /Each 440364-131280 $0.09 440365-131280 0.42 440366-131280 0.32 440367-131280 0.36 440368-131280 0.45 440369-131280 0.87 440370-131280 1.23

Utility Price Part No. /Each 67898 67899 67900 67901 67902

0.12 0.44 0.29 0.45 0.84

*For tubing with .170 I.D. / .040 wall thickness **For tubing with .126 I.D. / .062 wall thickness

10-14 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Long Nut Delrin Sleeve

Tube O.D. 1/4 5/16 3/8 1/2 5/8

Part No. 68263 68264 68265 68266 68267

Price /Each $0.07 0.25 0.13 0.23 0.41

Weatherhead Vendor Price Tube O.D. No. Part No. /Each 1/8 3/16 1/4 1611X4 440392-131280 0.48 5/16 3/8 1/2 5/8 3/4

Utility Price Part No. /Each 68268 $0.87 68269 0.65 68270 0.46 68271 1.44 68272 0.65 68273 2.95 68274 2.02 68275 6.97

10_pHyd_1-42.qxd

3/11/07

2:29 PM

Page 15

BRASS COMPRESSION FITTINGS Male Connector

Bulkhead Nut

Weatherhead Vendor Price Tube O.D. MPT No. Part No. /Each 1/8 1/8 68X2 440420-131280 $0.83 3/16 1/8 68X3 440421-131280 0.79 3/16 1/4 1/4 1/8 68X4 440422-131280 0.69 1/4 1/4 68X4X4 440423-131280 0.95 1/4 3/8 1/4 1/2 5/16 1/8 68X5 440424-131280 0.84 5/16 1/4 68X5X4 440425-131280 1.15 5/16 3/8 3/8 1/8 68X6X2 440426-131280 1.15 3/8 1/4 68X6 440427-131280 1.15 3/8 3/8 68X6X6 440428-131280 1.63 3/8 1/2 68X6X8 440429-131280 2.03 3/8 3/4 7/16 1/4 7/16 3/8 1/2 1/4 68X8X4 440431-131280 2.60 1/2 3/8 68X8 440432-131280 2.00 1/2 1/2 68X8X8 440433-131280 1.72 1/2 3/4 5/8 3/8 5/8 1/2 68X10 440434-131280 3.58 5/8 3/4 3/4 1/2 3/4 3/4 7/8 1/2 7/8 3/4

Vendor No. 0102X4 0102X5 0102X6 0102X8

Tube O.D. 1/4 5/16 3/8 1/2

Part No. 440399-131280 440400-131280 440401-131280 440402-131280

Price /Each $0.96 1.29 1.11 1.50

Use with 74 series Bulkhead Union.

Union

Weatherhead Vendor Price Tube O.D. No. Part No. /Each 1/8 62X2 440403-131280 $1.19 3/16 62X3 440404-131280 1.19 1/4 x1/8* 1/4 x3/16* 1/4 62X4 440405-131280 0.93 5/16 x1/4* 5/16 62X5 440406-131280 1.65 3/8 x1/4* 3/8 x5/16* 3/8 62X6 440407-131280 1.52 7/16 1/2 x3/8* 1/2 62X8 440409-131280 3.21 5/8 x3/8* 5/8 x1/2* 5/8 62X10 440410-131280 4.94 3/4 7/8

Utility Price Part No. /Each 69690 $0.89 69691 0.94 69389 1.73 69390 2.69 69692 0.91 69391 4.48 69693 1.33 69392 1.37 69393 2.69 69694 1.48 69695 6.39 69394 2.21 69696 2.76 69395 2.41 69700 3.30 69697 3.25 69698 7.14 69699 6.31

*Reducing Union

Bulkhead Union

Weatherhead Utility Vendor Price Price Tube O.D. No. Part No. /Each Part No. /Each 1/4 74X4 440412-131280 $4.90 68276 $4.90 3/8 68277 8.93

Male Ball Check Connector

Tube O.D. 1/8 1/4 3/8

Weatherhead Vendor Price MPT No. Part No. /Each 1/8 1/8 63X4 440417-131280 3.92 1/4 63X6 440419-131280 4.15

Utility Price Part No. /Each 68284 $13.57 68285 3.89 68286 3.96

Male Connector (Drilled Through)

Utility Price Part No. /Each 69701 $0.80 69702 0.76 69703 2.21 69704 0.66 69705 0.91 69706 1.49 69707 1.97 69708 0.83 69709 1.10 69710 1.75 69712 1.09 69713 1.09 69714 1.60 69715 1.97 69716 4.19 69717 3.56 69518 3.94 69718 1.52 69719 1.94 69720 1.69 69721 3.32 69722 1.97 69723 2.16 69724 3.28 69725 4.59 69726 4.87 69727 10.35 69728 3.89

Tube O.D. 1/4 1/4 3/8 3/8 1/2 1/2 5/8 5/8

MPT 1/8 1/4 3/8 1/2 3/8 1/2 1/2 3/4

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

FPT 1/8 1/8 1/4 1/8 1/4 3/8 1/2 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4 3/8 1/2 3/4 1/2 3/4 3/4

Weatherhead Utility Vendor Price Price No. Part No. /Each Part No. /Each 66X2 440438-131280 $1.04 69478 $0.78 66X3 440439-131280 1.23 69479 0.79 69480 4.44 66X4 440440-131280 1.00 69481 0.82 66X4X4 440441-131280 1.67 69482 1.25 69483 2.33 69484 3.03 66X5 440442-131280 0.95 69485 0.92 69486 1.29 66X6X2 440444-131280 1.34 69488 1.32 66X6 440445-131280 1.93 69489 1.45 69490 1.59 69491 1.59 69492 2.70 66X8 440446-131280 2.70 69493 1.65 69494 1.65 67361 6.78 69495 3.98 69496 2.35 69497 3.66 67362 8.58 69498 11.19 69499 4.54

Price /Each $0.75 0.93 1.31 1.68 1.55 1.68 2.35 5.57

Part No. 69771 69772 69773 69774 69775 69776 69777

Price /Each $15.49 3.83 7.99 7.62 4.63 7.04 12.32

45° Male Elbow

Tube O.D. 3/16 1/4 5/16 5/16 3/8 1/2 5/8

MPT 1/8 1/8 1/8 1/4 1/4 3/8 1/2

Union Elbow

Female Connector

Tube O.D. 1/8 3/16 3/16 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 7/8

Part No. 68291 68292 68295 68296 68297 68298 68299 68300

Tube O.D. 1/8 3/16 1/4 5/16 3/8 x1/4 3/8 1/2 5/8 5/8 x3/8 3/4 7/8

Vendor No.

65X4 65X5 65X6 65X8

Weatherhead Utility Price Price /Each Part No. /Each 69379 $3.26 69380 3.16 440449-131280 1.92 69381 1.88 440450-131280 3.24 69383 2.87 69384 4.64 440451-131280 2.54 69512 2.51 440452-131280 4.00 69513 3.84 69386 4.86 67363 6.90 69387 12.38 69388 20.99 Part No.

10-15 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Compression Fittings

Brass Compression Fittings (Standard)

10_pHyd_1-42.qxd

3/11/07

2:30 PM

Page 16

BRASS COMPRESSION FITTINGS & SELF-ALIGN BRASS FITTINGS Brass Compression Fittings (Standard) Cont. Compression Fittings

Tube O.D. 1/8 3/16 1/4 1/4 3/8

90° Male Elbow

Tube O.D. 1/8 1/8 3/16 3/16 3/16 1/4 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16

MPT 1/16 1/8 1/8 1/8 F 1/4 1/8 1/8 F 1/4 1/4 F 3/8 1/2 1/8 1/8 F 1/4

5/16 5/16 3/8 3/8 3/8 3/8 3/8 3/8 7/16 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 7/8

1/4 F 3/8 1/8 1/4 1/4 F 3/8 3/8 F 1/2 1/4 1/4 3/8 1/2 3/4 3/8 1/2 3/4 1/2 3/4 3/4

Weatherhead Utility Vendor Price Price No. Part No. /Each Part No. /Each 69X2X1 440453-131280 $4.08 69X2 440454-131280 1.44 69730 1.39 69X3 440455-131280 1.29 69731 1.29 69370 2.33 69732 2.44 69X4 440456-131280 1.27 69733 1.25 69371 2.25 69X4X4 440457-131280 1.55 69734 1.50 69372 2.53 69735 2.53 69736 4.75 69X5 440458-131280 1.65 69737 1.60 69373 2.46 69X5X4 440459-131280 1.92 69738 1.86

69X6X2 440460-131280 1.76 69X6 440461-131280 1.94 69X6X6 440462-131280 2.10 69X6X8 440463-131280 2.95 69X8X4 440465-131280 3.33 69X8 440466-131280 2.89 69X8X8 440467-131280 3.99

69X10 440468-131280 4.79

69374 69739 69741 69742 69375 69743 69376 69744 69377 69745 69746 69747 69748 69749 69750 69751 69752 69753 69754

2.79 3.30 1.70 1.89 3.18 1.99 3.24 2.91 4.77 3.25 2.85 3.66 5.67 4.71 4.65 8.59 8.05 9.01 12.25

F = Forged

90° Female Elbow

Control Nut

Street/Adapter Tee

MPT 1/8 1/8 1/8 1/4 1/4

FPT 1/8 1/8 1/8 1/4 1/4

Part No. 68354 68355 68356 68357 68358

Price /Each $6.35 3.65 3.84 6.53 7.34

FPT 1/8 1/8 1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4 1/2 3/4 1/2 3/4

Part No. 68324 68325 68326 68327 68328 68329 68330 68331 68332 68333 68334 68335 68336 68337 68338 68339 68340 68341

Price /Each $4.98 2.99 1.66 2.77 3.27 3.71 3.25 2.84 3.25 3.39 6.63 4.54 4.91 7.95 6.06 9.25 15.22 19.29

10-16 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 68359

Price /Each $1.60

Self-Align Brass Fittings Used with aluminum, copper and plastic tubing. Plastic tubing, except for PT2300 and TP160 requires 2030x insert. Not recommended for steel tubing. Should include the tube support 2030x.

Union Tee

Nut with Captive Sleeve Tube Vendor O.D. No. 1/8 3/16 64X3 1/4 64X4 1/4 F 5/16 64X5 3/8 x1/4 3/8 64X6 3/8 F 1/2 64X8 5/8 3/4

Weatherhead Price Part No. /Each 440481-131280 3.12 440482-131280 3.53 440483-131280 3.74 440484-131280 4.33 440485-131280 5.51

Utility Price Part No. /Each 69660 $4.27 69661 3.07 69662 2.81 69396 3.84 69663 3.70 69397 5.69 69664 2.90 69398 4.40 69665 4.97 69666 7.14 69667 18.62

F = Forged

Male Run Tee

Please Note: Utility Align Nuts come assembled with brass sleeve. Weatherhead nuts/sleeves must be ordered separately. Self-Align fittings are 3-piece compression-style flareless fittings used with metal or plastic tubing. Compression and Self-Align fittings differ only in nut and sleeve; bodies are interchangeable. Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4

Part No.

Price /Each

67890 67891 67892 67893 67894 67895 67896 67897

$1.12 1.10 1.10 1.34 1.42 1.49 17.25 5.31

Sleeve Weatherhead Tube Vendor Price O.D. MPT No. Part No. /Each 1/8 1/8 3/16 1/8 71X3 440486-131280 2.66 1/4 1/8 71X4 440487-131280 2.95 1/4 1/4 1/16 1/8 3/8 1/8 3/8 1/4 71X6 440490-131280 3.65 3/8 3/8 1/2 3/8 1/2 1/2 3/4 1/2

Utility Price Part No. /Each 68342 $3.12 68343 2.66 68344 2.79 68345 3.50 68346 4.13 68347 4.10 68348 3.59 68349 4.49 68350 6.57 68351 9.38 68353 23.06

Male Branch Tee Tube O.D. 1/8 3/16 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 3/4 3/4

Tube O.D. 1/4

Weatherhead Tube Vendor O.D. MPT No. 1/8 1/8 3/16 1/8 1/4 1/8 72X4 1/4 1/4 72X4x 4x 4 5/16 1/8 72 x 5 5/16 1/4 3/8 1/8 3/8 1/4 72X6 3/8 3/8 1/2 3/8 72 x 8 1/2 1/2 5/8 1/2 3/4 1/2 3/4 3/4

Part No.

440493-131280 440494-131280 440495-131280

440496-131280 440497-131280

Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8

Vendor No. 601X2 601X3 601X4 601X5 601X6 601X8 601X10

Part No. 440498-131280 440499-131280 440500-131280 440501-131280 440502-131280 440503-131280 440504-131280

Price /Each $0.23 0.17 0.19 0.20 0.29 0.61 1.13

3/4 1

601X12 601X16

440505-131280 440506-131280

1.29 1.90

Part No. 440507-131280 440508-131280 440509-131280 440510-131280 440511-131280 440512-131280 440513-131280 440514-131280

Price /Each $0.22 0.24 0.39 0.38 0.47 0.95 2.66 3.41

Nut

Utility Price Price /Each Part No. /Each 69756 $6.04 69757 3.01 2.95 69758 2.88 3.29 69759 3.15 3.45 69760 3.39 69761 3.60 69762 4.53 3.51 69763 3.45 69764 4.49 7.96 69766 5.43 69767 7.45 69768 8.65 69769 24.44 69755 23.92

Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4

Vendor No. 611X2 611X3 611X4 611X5 611X6 611X8 611X10 611X12

10_pHyd_1-42.qxd

3/11/07

2:30 PM

Page 17

SELF-ALIGN BRASS FITTINGS Bulkhead Union

Long Nut

Weatherhead Utility Vendor Price Price Tube O.D. No. Part No. /Each Part No. /Each 1/4 741X4 440531-131280 $6.79 67910 $6.79 3/8 67911 8.53

Tube O.D. 3/16 1/4 5/16 3/8 1/2 5/8 3/4

Price /Each $0.65 0.46 1.44 0.65 2.95 2.02 6.97

Part No. 68269 68270 68271 68272 68273 68274 68275

Bulkhead Nut

Tube O.D. 1/4 5/16 3/8 1/2

Vendor No. 0102X4 0102X5 0102X6 0102X8

Part No. 440399-131280 440400-131280 440401-131280 440402-131280

Price /Each $0.96 1.29 1.11 1.50

90° Union Elbow

Male Connector

Utility Price Part No. /Each 67930 $2.15 67931 2.74 67932 4.36

90° Male Elbow Tube O.D. 1/8 1/8 3/16 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8

MPT 1/16 1/8 1/8 1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 1/2

Vendor No. 681X2X1 681X2 681X3 681X4 681X4X4 681X5 681X5X4 681X6X2 681X6 681X6X6 681X6X8 681X8X4 681X8 681X8X8 681X10

Weatherhead Price Part No. /Each 440535-131280 $2.01 440536-131280 0.96 440537-131280 1.15 440539-131280 0.98 440540-131280 1.19 440541-131280 1.39 440542-131280 1.55 440543-131280 1.25 440544-131280 1.47 440545-131280 2.26 440546-131280 3.46 440547-131280 3.65 440548-131280 3.07 440549-131280 2.15 440550-131280 2.69

Utility Price Part No. /Each 67947 67948 67949 67950 67951 67952 67953 67954 67955 67956

0.91 1.05 0.96 1.15 1.37 1.55 1.24 1.44 1.81 2.29

67957 67958 67960

2.23 2.10 2.49

Use on 741 Bulkhead Unions (this page)

Male Ball Check Connector

Union

Weatherhead Vendor Price Tube O.D. No. Part No. /Each 1/4 651X4 440569-131280 2.19 3/8 651X6 440571-131280 3.99 1/2

Tube O.D. 1/8 1/8 3/16 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8

MPT 1/16 1/8 1/8 1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 1/2

Vendor No. 691X2X1 691X2 691X3 691X4 691X4X4 691X5 691X5X4 691X6X2 691X6 691X6X6 691X6X8 691X8X4 691X8 691X8X8 691X10

Weatherhead Price Part No. /Each 440573-131280 $3.54 440574-131280 1.48 440575-131280 2.01 440576-131280 1.59 440577-131280 1.85 440578-131280 2.31 440579-131280 2.87 440580-131280 2.17 440581-131280 2.19 440582-131280 2.25 440583-131280 3.19 440584-131280 6.62 440585-131280 3.65 440586-131280 3.95 440587-131280 10.64

Utility Price Part No. /Each 67966 67967 67968 67969 67970 67971 67972 67973 67974 67975

1.44 1.66 1.58 1.83 2.17 2.29 2.09 2.15 2.21 3.15

67976 67977 67978

3.63 3.90 5.44

90° Female Elbow Weatherhead Utility Vendor Price Price Tube O.D. No. Part No. /Each Part No. /Each 1/8 621X2 440523-131280 $1.43 67903 $1.39

Tube O.D. 3/8

3/16 1/4 5/16 3/8 1/2 5/8

Female Connector

621X3 621X4 621X5 621X6 621X8 621X10

440524-131280 440525-131280 440526-131280 440527-131280 440528-131280 440529-131280

1.95 1.65 2.49 1.99 2.98 11.71

67904 67905 67906 67907 67908 67909

1.93 1.61 2.45 1.98 2.95 3.89

Tube O.D. 1/8 3/16 1/4 1/4 5/16 3/8 3/8 1/2 1/2

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

MPT 1/4

FPT 1/8 1/8 1/8 1/4 1/8 1/8 1/4 3/8 1/2

Vendor No. 631X6

Vendor No. 661X2 661X3 661X4 661X4X4 661X5 661X6X2 661X6 661X8

Part No. 440557-131280

Weatherhead Price Part No. /Each 440558-131280 $1.58 440559-131280 1.99 440560-131280 1.55 440561-131280 1.79 440562-131280 3.15 440564-131280 2.33 440565-131280 1.59 440566-131280 3.74

Price /Each $5.37

Utility Price Part No. /Each 67934 $1.54 67936 67937

1.09 1.65

67941 67942 67943

1.57 2.74 2.91

Tube O.D. 1/4 1/4 3/8 1/2

FPT 1/8 1/4 1/4 3/8

Part No. 67979 67980 67982 67983

Price /Each $2.28 3.25 3.25 4.81

Part No. 67962 67963 67964

Price /Each $4.35 6.22 3.56

45° Male Elbow

Tube O.D. 1/4 5/16 3/8

MPT 3/8 1/8 1/4

10-17 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Compression Fittings

Self-Align Brass Fittings Cont.

10_pHyd_1-42.qxd

3/11/07

2:30 PM

Page 18

SELF-ALIGN BRASS FITTINGS & BRASS POLYLINE FITTINGS Self-Align Brass Fittings Cont.

Brass Nut (No Sleeve)

Compression Fittings

Union Tee Weatherhead

Weatherhead Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2

Utility

Vendor No.

Part No.

Price /Each

641X3 641X4 641X5 641X6 641X8

440597-131280 440598-131280 440599-131280 440600-131280 440601-131280

4.45 2.95 3.81 3.75 6.24

Price /Each $5.44 4.45 2.93 3.63 3.68 5.66

Part No. 67921 67922 67923 67924 67925 67926

Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2

Utility

Vendor No. 1261X2 1261X3 1261X4

Part No. 440628-131280 440629-131280 440630-131280

Price /Each $0.74 0.57 0.49

1261X6

440632-131280

0.52

Price /Each $0.72

Part No. 68370 68371 68372 68373 68374

0.74 0.74 0.75 0.81

Brass Nut (Plastic Sleeve Assembly)

Male Run Tee Weatherhead

Weatherhead Tube O.D. 3/16 1/4 3/8

Vendor No. 711X3 711X4 711X6

MPT 1/8 1/8 1/4

Utility Price /Each $4.33 3.12 5.03

Part No. 440602-131280 440603-131280 440606-131280

Tube O.D. 1/4 5/16 3/8

Part No. 67986 67988

Price /Each

MPT 1/8 1/4 1/4 3/8 1/2

Part No. 440609-131280 440610-131280 440612-131280 440613-131280

Utility Price /Each $3.92 5.73 3.49 6.55

Part No. 67990 67992 67993 67994

Price /Each $3.25 3.46 6.50 7.56

Brass Polyline Fittings Polyline flareless fittings are used with plastic tubing. Anderson’s cross is the PolyFit; Parker’s cross is the Poly-Tite; Standard sleeve is plastic. Note: Wall thickness of tube should be considered with the 1/4" O.D. tube size. The standard wall thickness in the 1/4" size is .040 and uses suffix of X4. Example (1262X4). The .062 wall thickness is shown as suffix X46 (1262X46). When buying tubing, standard wall thickness is also .040 and carries the Weatherhead Part Number PT24044. The 1/4" tubing with a wall of .040 outsells (10:1) the 1/4" with .062 wall. The tube fittings for .040 outsells .062 significantly. Weatherhead Vendor No. 1260X4 1260X5 1260X6 1260X8

1261X6A

440636-131280

0.61

Part No. 440618-131280 440619-131280 440620-131280 440621-131280

Price /Each $0.59 0.92 0.58

Brass Nut (Brass Sleeve Assembly)

Part No. 68379 68380 68382 68383

Price /Each $1.00 0.97 2.83 1.01

Part No. 68384

Price /Each $4.14

Reducing Union

Tube O.D. 3/8 x1/4

Utility Price /Each $0.13 0.18 0.12 0.31

Part No. 68361 68362 68363 68364

Price /Each $0.13 0.15 0.12 0.21

Weatherhead Tube O.D. 1/8 1/4 5/16 3/8 1/2

Part No.

Price /Each

1262X4

440651-131280

2.95

1262X6

440653-131280

3.00

10-18 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Each $0.81 0.40 2.39

Part No. 69822 69785 69786 69787 69788

Price /Each $3.34 2.88 6.32 2.94 7.34

Self-Align® to Polyline Union

Tube O.D. 1/4

Part No. 68365 68366 68368

Utility

Vendor No.

Brass Sleeve

Tube O.D. 1/8 1/4 3/8

Part No. 68375 68376 68377

Union

Plastic Sleeve

Tube O.D. 1/4 5/16 3/8 1/2

Price /Each $0.59

Tube O.D. 1/8 1/4 3/8 1/2 Weatherhead

Tube O.D. 1/4 1/4 3/8 1/2 1/2

Part No. 440634-131280

2.99 4.19

Male Branch Tee

Vendor No. 721X4 721X4X4X4 721X6 721X8

Utility

Vendor No. 1261X4A

Part No. 69823

Price /Each $1.86

10_pHyd_1-42.qxd

3/11/07

2:30 PM

Page 19

BRASS POLYLINE FITTINGS Brass Polyline Fittings Cont. Bulkhead Union Weatherhead

Tube O.D. 1/4 3/8 1/2

Price /Each $7.34 7.40 10.84

Part No. 68412 68413 68414

Female Connector

FPT 1/8 1/8 1/4 1/8 1/4 3/8

Part No. 440664-131280 440666-131280 440667-131280

Price /Each $2.17 1.70 2.60

1266X6

440671-131280

3.19

Part No. 68390 68391 68392 68393 68394 68395

Weatherhead MPT 1/8 10-32 10-32 1/16 1/8 1/4 3/8 1/8 1/4 1/8 1/4 3/8 3/8

MPT 1/8 1/4 1/8 1/4 3/8

1270X4 1270X4X4

440694-131280 440695-131280

3.99 4.25

Price /Each $11.66 2.60 4.19 3.91 6.99

Part No. 69803 69815 69816 69817 69820

Price /Each $2.10 1.65 3.36 4.23 2.89 4.61

Part No.

Price /Each

1268X4X1 1268X4 1268X4X4

440679-131280 440680-131280 440681-131280

4.12 1.55 1.79

1268X6X2 1268X6 1268X6X6 1268X8

440685-131280 440686-131280 440687-131280 440689-131280

Weatherhead Tube O.D. 1/8 1/4 1/4 1/4 1/4 5/16 3/8 3/8 3/8 1/2

MPT 1/8 1/16 1/8 1/4 3/8 1/8 1/8 1/4 3/8 3/8

1.88 2.18 2.33 3.65

Part No. 69800 69798 69799 69790 69791 69801 69792 69793 69796 69794 69795 69797

Price /Each $1.93 3.72 4.64

Price /Each $3.97 4.52 6.12 4.46 10.05

Part No.

Price /Each

1269X4X1 1269X4 1269X4X4 1269X4X6

440703-131280 440704-131280 440705-131280 440707-131280

4.48 1.62 1.79 3.65

1269X6X2 1269X6 1269X6X6

440710-131280 440711-131280 440712-131280

2.36 3.12 3.29

Price /Each $2.59

Part No. 69814 69804 69805 69802 69806 69813 69808 69809 69811

1.59 1.75 3.59 3.37 2.35 2.65 3.25 5.23

1.49 1.75 4.36 3.54 2.59 1.79 2.12 2.33 3.17

Union Tee

Weatherhead Tube O.D. 1/8 1/4 5/16 3/8 1/2

Tube O.D. 1/4 1/4

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

FPT 1/4 3/8

Part No. 68410 68411

Utility

Vendor No.

Part No.

Price /Each

1264X4

440718-131280

4.19

1264X6

440721-131280

5.81

Female Branch Tee

Part No. 68397 68398 68399 68400 68401

Utility

Vendor No.

Utility

Vendor No.

Male Run Tee

Tube O.D. 1/4 1/4 5/16 3/8 1/2

Part No.

Utility

Vendor No. 1266X2 1266X4 1266X4X4

Male Connector

Tube O.D. 1/8 1/8 1/4 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 1/2

FPT 1/8 1/8 1/4 1/4 3/8

Price /Each

90° Male Elbow

Weatherhead Tube O.D. 1/8 1/4 1/4 5/16 3/8 1/2

Tube O.D. 1/8 1/4 1/4 3/8 1/2

Utility

Vendor No.

Part No. 68385 68386 68387 68388 68389

Price /Each $9.10 3.99 6.80 5.75 7.94

Male Branch Tee

Price /Each $14.09 9.89

Tube O.D. 1/8 1/4 1/4 5/16 3/8 3/8 1/2

MPT 1/8 1/8 1/4 1/8 1/8 1/4 3/8

Part No. 68402 68403 68404 68405 68406 68407 68408

Price /Each $7.13 4.26 6.06 7.20 9.89 5.78 11.65

10-19 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Compression Fittings

90° Female Elbow

10_pHyd_1-42.qxd

3/11/07

2:30 PM

Page 20

NYLON MOLDED & STAINLESS STEEL COMPRESSION FITTINGS Nylon Molded Compression Fittings Compression Fittings

Male Connector

Tube O.D. Pipe Thread 1/8" 1/8" 1/4" 1/8" 1/4" 1/4" 1/4" 3/8" 5/16" 1/8" 5/16" 1/4" 3/8" 1/8" 3/8" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/4" 1/2" 3/8" 1/2" 1/2" 5/8" 1/2" 3/4" 3/4"

Female Elbow

Tube O.D. 1/4" 3/8"

Part No. 0443227 0443236 0443237 0443238 0443256 0443257 0443274 0443273 0443275 0443276 0443295 0443294 0443296 0443312 0443317

Vendor No. 1568X2 1568X4 1568X4X4 1568X4X6G 1568X5 1568X5X4 1568X6X2 1568X6 1568X6X6 1568X6X8 1568X8X4 1568X8 1568X8X8 1568X10G 1568X12X12G

Price /EA $0.85 0.85 0.94 1.07 1.01 1.12 1.19 1.04 1.17 1.68 2.14 1.68 1.50 1.98 4.05

Vendor No. 1566X4 1566X4X4 1566X6 1566X6X6 1566X6X8 1566X8 1566X8X8

Price /EA $1.08 1.07 1.71 1.68 1.91 1.57 1.68

Female Connector

Bulkhead Nut

Pipe Thread 1/4" 3/8"

Part No. 0443243 0443280

Vendor No. 1570X4X4 1570X6X6

Price /EA $1.68 2.55

Union Elbow

Tube O.D. 1/4" 3/8"

Vendor No. 1564X8 1565X6

Part No. 0443233 0443269

Price /EA $1.55 2.55

Male Branch Tee

Tube O.D. 1/4" 1/4" 3/8" 1/2"

Pipe Thread 1/8" 1/4" 3/8" 1/2"

Part No. 0443246 0443247 0443284 0443305

Vendor No. 1572X4 1572X4X4X4 1572X6X6X6 1572X8X8X8

Price /EA $2.11 1.96 2.71 3.65

Tube O.D. 1/4" 3/8"

Part No. 0443228 0443264

Vendor No. 1502X4 1502X6

Price /EA $0.24 0.36

Stainless Steel Compression Fittings

Tube O.D. 1/4 3/8 1/2 5/8

Part No. 425010 425012 425013 425014

Price /Each $3.60 4.02 5.90 12.67

Part No. 425019 425020 425021 425022 425023 425024 425025 425026 425028 425029

Price /Each $3.49 3.60 3.04 5.96 4.32 4.24 9.65 13.91 20.54 44.75

Part No. 425032 425033 425034 425035 425036 425037 425038 425039 425041 425042

Price /Each $2.68 3.01 1.80 3.02 3.12 2.53 4.22 6.47 12.10 21.95

Part No. 425045 425046 425047 425048 425049 425050 425051 425053 425055

Price /Each $28.93 21.16 13.13 26.25 24.64 16.88 26.78 72.03 106.93

Nut

Union Tee Tube O.D. 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2"

Pipe Thread 1/8" 1/4" 1/4" 3/8" 1/2" 3/8" 1/2"

Part No. 0443234 0443235 0443270 0443271 0443272 0443292 0443293

Pipe Thread 7/16" 1/2" 5/8" 3/4" 7/8" 1-1/16-20

Part No. 0443231 0443253 0443267 0443290 0443309 0443315

Vendor No. 1562X4 1562X5 1562X6 1562X8 1562X10G 1562X12G

Price /EA $1.34 1.69 1.90 2.44 3.76 5.96

Bulkhead Union

Tube O.D. 1/4" 3/8" 1/2" 3/4"

Part No. 0443248 0443285 0443306 0443318

Vendor No. 1574X4 1574X6 1574X8 1574X12G

Price /EA $2.01 2.52 3.49 7.24

Male Elbow

Tube O.D. 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8"

Pipe Thread 1/8" 1/4" 3/8" 1/4" 3/8" 1/4" 3/8" 1/2" 1/2"

Part No. 0443226 0443232 0443268 0443291

Vendor No. 1564X2 1564X4 1564X6 1564X8

Price /EA $2.23 1.96 3.17 3.49

Male Run Tee

Union Connector

Tube O.D. 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

Tube O.D. 1/8" 1/4" 3/8" 1/2"

Part No. 0443239 0443240 0443241 0443277 0443278 0443298 0443297 0443299 0443313

Vendor No. 1569X4 1569X4X4 1569X4X6 1569X6 1569X6X6 1569X8X4G 1569X8 1569X8X8 1569X10G

Price /EA $1.51 1.43 1.49 1.56 1.58 2.37 2.18 2.26 3.11

10-20 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Vendor Tube O.D. Pipe Thread Part No. No. 1/4" 1/4" 0443245 1571X4X4X4 1/2" 1/2" 0443303 1571X8X8X8G

Price /EA $1.96 4.37

Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4

Tube Sleeve Ferrule

Compression Nut

Tube O.D. 1/4" 3/8" 1/2"

Part No. 0443230 0443266 0443289

Vendor No. 1561X4G 1561X6G 1561X8G

Price /EA $0.59 1.13 1.05

Part No. 0443249 0443263 0443286 0443307

Vendor No. 1584X4 1584X5 1584X6 1584X8

Price /EA $0.13 0.20 0.19 0.32

Insert

Tube O.D. 1/4" 5/16" 3/8" 1/2"

Cap Nut

Tube O.D. 1/8" 1/4" 3/8" 1/2"

Part No. 0443225 0443229 0443265 0443288

Vendor No. 1529X2 1529X4 1529X6 1529X8

Price /EA $0.50 0.54 0.63 0.85

Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4

Straight Tube Union

Tube O.D. 1/8 3/16 1/4 5/16 3/8 x1/4 3/8 1/2 3/4 1

10_pHyd_1-42.qxd

3/11/07

2:30 PM

Page 21

STAINLESS STEEL COMPRESSION FITTINGS Straight Tube Union Large Hex Tube O.D. 1/4 3/8 1/2 x3/8 1/2

Part No. 425059 425060 425061 425062

Price /Each $22.50 23.84 43.92 42.85

Male Straight Adapter

Tube O.D. 1/8 1/4 1/4 1/4 5/16 3/8 3/8 3/8 1/2 1/2 1/2 5/8 3/4 3/4 1 1 1-1/4

MPT 1/8 1/4 3/8 1/2 1/4 1/8 3/8 1/2 1/4 1/2 3/4 3/4 1/2 3/4 3/4 1 1-1/4

Female Straight Adapter

Tube O.D. 1/4 3/8 3/8 1/2 1/2 3/4 1

FPT 1/4 3/8 1/2 1/4 1/2 3/4 1

90° Female Elbow

Part No. 425087 425088 425089 425090 425091 425092 425093

Price /Each $14.20 20.09 30.00 21.43 35.62 58.53 96.40

Tube O.D. 1/4 1/4 3/8 1/2 3/4

FPT 1/8 1/4 3/8 1/2 3/4

Part No. 425142 425143 425144 425146 425147

Price /Each $20.89 27.59 74.44 55.16 110.40

Part No. 425158 425159 425161 425162 425163

Price /Each $28.71 34.28 36.16 105.80 106.93

Male Side Tee

90° Male Elbow

Part No. 425066 425067 425068 425069 425070 425071 425072 425073 425074 425075 425076 425078 425079 425080 425081 425082 425083

Price /Each $13.39 11.79 14.73 18.75 14.63 14.07 13.83 20.31 18.70 21.01 38.84 81.04 51.42 50.35 79.91 72.84 253.26

Tube O.D. 1/4 1/4 5/16 3/8 3/8 3/8

MPT 1/4 3/8 1/4 1/8 3/8 1/2

Part No. 425105 425106 425107 425108 425109 425110

Price /Each $18.75 38.03 25.45 24.21 27.86 39.64

1/2 1/2 1/2 3/4 3/4 1 1-1/4

1/4 1/2 3/4 1/2 3/4 1 1-1/4

425111 425112 425113 425115 425116 425118 425119

34.28 42.85 100.69 160.18 70.16 123.83 242.01

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Tube O.D. 1/4 1/4 3/8 1/2 1/2

MPT 1/8 1/4 1/4 3/8 1/2

Tube Tee

Tube O.D. 1/4 5/16 3/8 1/2 3/4

Part No. 425177 425178 425179 425180 425182

Price /Each $28.39 52.91 36.43 58.64 138.43

10-21 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Compression Fittings

Stainless Steel Compression Fittings Cont.

10_pHyd_1-42.qxd

3/11/07

2:30 PM

Page 22

INSTRUMENTATION STYLE COMPRESSION FITTINGS How to Order Tylok® Tube Fittings

Instrumentation Style Compression Fittings Compression Fittings

Tylok Tube Fittings (CBC-Lok™) are ordered as listed in this catalog by inserting the material code before the part number. Tylok Tube Fittings can be identified through the part number as to material, tube size, configuration, and thread connection. The part number describes a complete fitting assembly. Other part families may be available, but not listed in this catalog. Go to www.tylok.com for a list of all product families offered. Tylok Tube Fittings are made in the USA. Example: A stainless steel male connector, 1/2" tube size to a 1/2" male pipe is designated below...

SS - 8 - D MC - 8 CBC-Lok™ Tube Fittings are fully interchangeable with tube fittings of Swagelok® and Parker A-Lok® fittings featuring double collet (ferrule) swaging action.

Material Chart 1

Tube OD Style Part Family Odd End Size Chart 2 Chart 3 Chart 2

CHART 1 - MATERIAL Designator B

A-Lok®

*Parker is a registered trademark of Parker Hannifin Corporation. ® Swagelok is a registered trademark of Swagelok Company.

SS

CHART 2 - TUBE O.D.

Material Brass Stainless Steel

Designator

Tube O.D. or Hose I.D. (inches)

CHART 3 - STYLE Designator Pipe Thread (NPT)

1

1/16

1/16-27

2

1/8

1/8-27

3

3/16

4

1/4

5

5/16

6

3/8

3/8-18

8

1/2

1/2-14

10

5/8

12

3/4

14

7/8

16

1

D

Style CBC-Lok™, Nut & 2 Ferrules

1/4-18

3/4-14

1-11.5

Male Connector

Stainless Steel

Brass

Swagelok® Ref. No.

Parker A-Lok® Ref. No.

UOM /Each

CBC-LOK Ref No.

Swagelok® Ref. No.

Parker A-Lok® Ref. No.

UOM /Each

MPT

Part No.

CBC-LOK Ref No.

1/4"

1/8"

0426435

SS-4-DMC-2

SS-400-1-2

SS-4MSC2N

$7.18

0426515

B-4-DMC-2

B-400-1-2

B-4MSC2N

$2.59

1/4"

1/4"

0426436

SS-4-DMC-4

SS-400-1-4

SS-4MSC4N

7.45

0426516

B-4-DMC-4

B-400-1-4

B-4MSC4N

2.58

3/8"

1/4"

0426437

SS-6-DMC-4

SS-600-1-4

SS-6MSC4N

10.17

0426517

B-6-DMC-4

B-600-1-4

B-6MSC4N

3.11

3/8"

3/8"

0426438

SS-6-DMC-6

SS-600-1-6

SS-6MSC6N

11.46

0426518

B-6-DMC-6

B-600-1-6

B-6MSC6N

3.42

1/2"

1/4"

0426439

SS-8-DMC-4

SS-810-1-4

SS-8MSC4N

14.80

0426519

B-8-DMC-4

B-810-1-4

B-8MSC4N

5.54

1/2"

1/2"

0426440

SS-8-DMC-8

SS-810-1-8

SS-8MSC8N

17.08

0426520

B-8-DMC-8

B-810-1-8

B-8MSC8N

5.93

3/4"

3/4"

0426441

SS-12-DMC-12

SS-1210-1-12

SS-12MSC12N

26.04

0426521

B-12-DMC-12

B-1210-1-12

B-12MSC12N

8.26

1"

0426442

SS-16-DMC-16

SS-1610-1-16

SS-16MSC16N

45.64

0426522

B-16-DMC-16

B-1610-1-16

B-16MSC16N

15.26

Tube Size

1"

Part No.

Union

Stainless Steel

Brass

Part No.

CBC-LOK Ref No.

Swagelok® Ref. No.

Parker A-Lok® Ref. No.

UOM /Each

1/16"

0426443

SS-1-DU

SS-100-6

SS-1SC1

1/8"

0426444

SS-2-DU

SS-200-6

SS-2SC2

3/16"

0426445

SS-3-DU

SS-300-6

SS-3SC3

Tube Size

Part No.

CBC-LOK Ref No.

Swagelok® Ref. No.

Parker A-Lok® Ref. No.

$16.65

0426523

B-1-DU

B-100-6

B-1SC1

11.64

0426524

B-2-DU

B-200-6

B-2SC2

3.67

10.62

0426525

B-3-DU

B-300-6

B-3SC3

3.55

UOM /Each $4.67

1/4"

0426446

SS-4-DU

SS-400-6

SS-4SC4

11.48

0426526

B-4-DU

B-400-6

B-4SC4

3.01

5/16"

0426447

SS-5-DU

SS-500-6

SS-5SC5

12.95

0426527

B-5-DU

B-500-6

B-5SC5

4.06

3/8"

0426448

SS-6-DU

SS-600-6

SS-6SC6

16.50

0426528

B-6-DU

B-600-6

B-6SC6

4.31

1/2"

0426449

SS-8-DU

SS-810-6

SS-8SC8

24.50

0426529

B-8-DU

B-810-6

B-8SC8

6.90

5/8"

0426450

SS-10-DU

SS-1010-6

SS-10SC10

31.79

0426530

B-10-DU

B-1010-6

B-10SC10

9.98

3/4"

0426451

SS-12-DU

SS-1210-6

SS-12SC12

39.68

0426531

B-12-DU

B-1210-6

B-12SC12

11.92

7/8"

0426452

SS-14-DU

SS-1410-6

SS-14SC14

64.68

0426532

B-14-DU

B-1410-6

B-14SC14

19.20

1"

0426453

SS-16-DU

SS-1610-6

SS-16SC16

68.86

0426533

B-16-DU

B-1610-6

B-16SC16

21.50

10-22 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_1-42.qxd

3/11/07

2:31 PM

Page 23

INSTRUMENTATION STYLE COMPRESSION FITTINGS

Compression Fittings

Instrumentation Style Compression Fittings Cont.

Union Elbow Stainless Steel

Brass

Part No.

CBC-LOK Ref No.

Swagelok® Ref. No.

Parker A-Lok® Ref. No.

Part No.

CBC-LOK Ref No.

Swagelok® Ref. No.

Parker A-Lok® Ref. No.

1/8"

0426454

SS-2-DELU-2

SS-200-9

SS-2EE2

3/16"

0426455

SS-3-DELU-3

SS-300-9

SS-3EE3

$15.60

0426534

B-2-DELU-2

B-200-9

B-2EE2

$6.66

15.56

0426535

B-3-DELU-3

B-300-9

B-3EE3

1/4"

0426456

SS-4-DELU-4

SS-400-9

6.15

SS-4EE4

16.76

0426536

B-4-DELU-4

B-400-9

B-4EE4

5/16"

0426457

SS-5-DELU-5

5.31

SS-500-9

SS-5EE5

17.89

0426537

B-5-DELU-5

B-500-9

B-5EE5

3/8"

0426458

6.93

SS-6-DELU-6

SS-600-9

SS-6EE6

20.46

0426538

B-6-DELU-6

B-600-9

B-6EE6

1/2"

7.03

0426459

SS-8-DELU-8

SS-810-9

SS-8EE8

33.65

0426539

B-8-DELU-8

B-810-9

B-8EE8

10.26

5/8"

0426460

SS-10-DELU-10

SS-1010-9

SS-10EE10

37.67

0426540

B-10-DELU-10

B-1210-9

B-12EE12

13.11

3/4"

0426461

SS-12-DELU-12

SS-1210-9

SS-12EE12

59.37

0426541

B-12-DELU-12

B-1210-9

B-12EE12

19.19

7/8"

0426462

SS-14DELU-14

SS-1410-9

SS-14EE14

91.14

0426542

B-14-DELU-14

B-1410-9

B-14EE14

30.25

1"

0426463

SS-16-DELU-16

SS-1610-9

SS-16EE16

113.63

0426543

B-16-DELU-16

B-1610-9

B-16EE16

35.81

UOM /Each

Tube Size

UOM /Each

UOM /Each

Male Elbow Stainless Steel

Brass

Swagelok® Ref. No.

Parker A-Lok® Ref. No.

UOM /Each

Part No.

CBC-LOK Ref No.

Swagelok® Ref. No.

Parker A-Lok® Ref. No.

MPT

Part No.

CBC-LOK Ref No.

1/4"

1/8"

0426464

SS-4-DME-2

SS-400-2-2

SS-4MSEL2N

$13.17

0426544

B-4-DME-2

B-400-2-2

B-4MSEL2N

$4.90

1/4"

1/4"

0426465

SS-4-DME-4

SS-400-2-4

SS-4MSEL4N

14.16

0426545

B-4-DME-4

B-600-2-4

B-6MSEL4N

5.27

3/8"

1/4"

0426466

SS-6-DME-4

SS-600-2-4

SS-6MSEL4N

17.60

0426546

B-6-DME-4

B-600-2-4

B-6MSEL4N

5.93

3/8"

3/8"

0426467

SS-6-DME-6

SS-600-2-6

SS-6MSEL6N

21.17

0426547

B-6-DME-6

B-600-2-6

B-6MSEL6N

6.80

3/8"

1/2"

0426468

SS-6-DME-8

SS-600-2-8

SS-6MSEL8N

27.23

0426548

B-6-DME-8

B-600-2-8

B-6MSEL8N

8.30

1/2"

1/2"

0426469

SS-8-DME-8

SS-810-2-8

SS-8MSEL8N

31.06

0426549

B-8-DME-8

B-810-2-8

B-8MSEL8N

8.38

3/4"

3/4"

0426470

SS-12-DME-12

SS-1210-2-12

SS-12MSEL12N

37.80

0426550

B-12-DME-12

B-1210-2-12

B-12MSEL12N

13.81

1"

0426471

SS-16-DME-16

SS-1610-2-16

SS-16MSEL16N

73.67

0426551

B-16-DME-16

B-1610-2-16

B-16MSEL-16N

27.03

Tube Size

1"

Union Tee Stainless Steel

Brass

Part No.

CBC-LOK Ref No.

Swagelok® Ref. No.

Parker A-Lok® Ref. No.

UOM Each

Part No.

CBC-LOK Ref No.

Swagelok® Ref. No.

Parker A-Lok® Ref. No.

1/8"

0426472

SS-2-DTTT-2

SS-200-3

SS-2ET2

3/16"

0426473

SS-3-DTTT-3

SS-300-3

SS-3ET3

$25.32

0426552

B-2-DTTT-2

B-200-3

B-2ET2

$8.40

25.63

0426553

B-3-DTTT-3

B-300-3

B-3ET3

1/4"

0426474

SS-4-DTTT-4

SS-400-3

9.34

SS-4ET4

23.64

0426554

B-4-DTTT-4

B-400-3

B-4ET4

5/16"

0426475

SS-5-DTTT-5

8.36

SS-500-3

SS-5ET5

26.99

0426555

B-5-DTTT-5

B-500-3

B-5ET5

3/8"

0426476

9.01

SS-6-DTTT-6

SS-600-3

SS-6ET6

30.80

0426556

B-6-DTTT-6

B-600-3

B-6ET6

1/2"

9.75

0426477

SS-8-DTTT-8

SS-810-3

SS-8ET8

46.79

0426557

B-8-DTTT-8

B-810-3

B-8ET8

14.23

5/8"

0426478

SS-10-DTTT-10

SS-1010-3

SS-10ET10

54.67

0426558

B-10-DTTT-10

B-1010-3

B-10ET10

18.09

3/4"

0426479

SS-12-DTTT-12

SS-1210-3

SS-12ET12

69.96

0426559

B-12-DTTT-12

B-1210-3

B-12ET12

22.99

7/8"

0426480

SS-14-DTTT-14

SS-1410-3

SS-14ET14

129.58

0426560

B-14-DTTT-14

B-1410-3

B-14ET14

43.08

1"

0426481

SS-16-DTTT-16

SS-1610-3

SS-16ET16

149.95

0426561

B-16-DTTT-16

B-1610-3

B-16ET16

46.19

Tube Size

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

UOM /Each

10-23 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_1-42.qxd

3/11/07

2:31 PM

Page 24

INSTRUMENTATION STYLE COMPRESSION FITTINGS Instrumentation Style Compression Fittings Cont.

Compression Fittings

Front Collet

Stainless Steel

Tube Size

Part No.

CBC-LOK Ref No.

Swagelok® Ref. No.

Brass Parker A-Lok® Ref. No.

UOM /Each

Part No.

CBC-LOK Ref No.

Swagelok® Ref. No.

Parker A-Lok® Ref. No.

UOM /Each

1/16"

0426482

SS-DFC-1

SS-103-1

SS-1FF1

$2.18

0426562

B-DFC-1

B-103-1

B-1FF1

$0.67

1/8"

0426483

SS-DFC-2

SS-203-1

SS-2FF2

1.41

0426563

B-DFC-2

B-203-1

B-2FF2

0.42

3/16"

0426484

SS-DFC-3

SS-303-1

SS-3FF3

1.39

0426564

B-DFC-3

B-303-1

B-3FF3

0.39

1/4"

0426485

SS-DFC-4

SS-403-1

SS-4FF4

1.20

0426565

B-DFC-4

B-403-1

B-4FF4

0.37

5/16"

0426486

SS-DFC-5

SS-503-1

SS-5FF5

1.37

0426566

B-DFC-5

B-503-1

B-5FF5

0.49

3/8"

0426487

SS-DFC-6

SS-603-1

SS-6FF6

1.40

0426567

B-DFC-6

B-603-1

B-6FF6

0.52

1/2"

0426488

SS-DFC-8

SS-813-1

SS-8FF8

2.00

0426568

B-DFC-8

B-813-1

B-8FF8

0.74

5/8"

0426489

SS-DFC-10

SS-1013-1

SS-10FF10

2.34

0426569

B-DFC-10

B-1013-1

B-10FF10

0.91

3/4"

0426490

SS-DFC-12

SS-1213-1

SS-12FF12

3.39

0426570

B-DFC-12

B-1213-1

B-12FF12

1.13

7/8"

0426491

SS-DFC-14

SS-1413-1

SS-14FF14

5.40

0426571

B-DFC-14

B-1413-1

B-14FF14

1.39

1"

0426492

SS-DFC-16

SS1613-1

SS-16FF16

6.03

0426572

B-DFC-16

B-1613-1

B-16FF16

2.12

Parker A-Lok® Ref. No.

UOM /Each

Nut

Stainless Steel

Brass

Part No.

CBC-LOK Ref No.

Swagelok® Ref. No.

Parker A-Lok® Ref. No.

1/16"

0426493

SS-DN-1

SS-102-1

SS-NU1

$3.79

0426573

B-DN-1

B-102-1

B-NU1

$0.96

1/8"

0426494

SS-DN-2

SS-202-1

SS-NU2

2.44

0426574

B-DN-2

B-202-1

B-NU2

0.63

3/16"

0426495

SS-DN-3

SS-302-1

SS-NU3

2.19

0426575

B-DN-3

B-302-1

B-NU3

0.56

1/4"

0426496

SS-DN-4

SS-402-1

SS-NU4

2.16

0426576

B-DN-4

B-402-1

B-NU4

0.42

5/16"

0426497

SS-DN-5

SS-502-1

SS-NU5

2.29

0426577

B-DN-5

B-502-1

B-NU5

0.62

3/8"

0426498

SS-DN-6

SS-602-1

SS-NU6

3.00

0426578

B-DN-6

B-602-1

B-NU6

0.71

1/2"

0426499

SS-DN-8

SS-812-1

SS-NU8

4.99

0426579

B-DN-8

B-812-1

B-NU8

0.98

5/8"

0426500

SS-DN-10

SS-1012-1

SS-NU10

6.89

0426580

B-DN-10

B-1012-1

B-NU10

1.31

3/4"

0426501

SS-DN-12

SS-1212-1

SS-NU12

8.20

0426581

B-DN-12

B-1212-1

B-NU12

1.79

7/8"

0426502

SS-DN-14

SS-1412-1

SS-NU14

10.65

0426582

B-DN-14

B-1412-1

B-NU14

3.27

1"

0426503

SS-DN-16

SS-1612-1

SS-NU16

15.64

0426583

B-DN-16

B-1612-1

B-NU16

4.30

UOM /Each

Tube Size

UOM /Each

Part No.

CBC-LOK Ref No.

Swagelok® Ref. No.

Rear Collet

Stainless Steel

Tube Size

Part No.

CBC-LOK Ref No.

Brass

Ref. No.

Parker A-Lok® Ref. No.

UOM /Each

Part No.

CBC-LOK Ref No.

Swagelok® Ref. No.

Parker A-Lok® Ref. No.

Swagelok®

1/16"

0426504

SS-DRC-1

SS-104-1

SS-1BF1

$2.06

0426584

B-DRC-1

B-104-1

B-1BF1

$0.60

1/8"

0426505

SS-DRC-2

SS-204-1

SS-2BF2

1.30

0426585

B-DRC-2

B-204-1

B-2BF2

0.36

3/16"

0426506

SS-DRC-3

SS-304-1

SS-3BF3

1.23

0426586

B-DRC-3

B-304-1

B-3BF3

0.36

1/4"

0426507

SS-DRC-4

SS-404-1

SS-4BF4

1.02

0426587

B-DRC-4

B-404-1

B-4BF4

0.37

5/16"

0426508

SS-DRC-5

SS-504-1

SS-5BF5

1.29

0426588

B-DRC-5

B-504-1

B-5BF5

0.39

3/8"

0426509

SS-DRC-6

SS-604-1

SS-6BF6

1.34

0426589

B-DRC-6

B-604-1

B-6BF6

0.42

1/2"

0426510

SS-DRC-8

SS-814-1

SS-8BF8

1.83

0426590

B-DRC-8

B-814-1

B-8BF8

0.69

5/8"

0426511

SS-DRC-10

SS-1014-1

SS-10BF10

2.17

0426591

B-DRC-10

B-1014-1

B-10BF10

0.78

3/4"

0426512

SS-DRC-12

SS-1214-1

SS-12BF12

3.05

0426592

B-DRC-12

B-1214-1

B-12BF12

1.08

7/8"

0426513

SS-DRC-14

SS-1414-1

SS-14BF14

4.05

0426593

B-DRC-14

B-1414-1

B-14BF14

1.27

1"

0426514

SS-DRC-16

SS-1614-1

SS-16BF16

4.65

0426594

B-DRC-16

B-1614-1

B-16BF16

1.74

10-24 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_1-42.qxd

3/11/07

2:31 PM

Page 25

NYLON LF3000 PUSH-TO-CONNECT FITTINGS

Specifications for Nylon Push-To-Connect Fittings(LF3000 System)

Straight Male Connector UNF

Fluids: Compressed air and vacuum Body Material: Nylon 6.6 or Nickel Plated Brass Seal: Nitrile Pressure Rating: 28" Hg to 290 PSI Temperature Rating: -4F to 175F Thread Sizes: 10-32 to 1/2 and M5 to 1/2 (BSP) Thread Types: NPT, BSPT, BSPP, UNF, Metric Tube Sizes: 1/8" to 1/2" and 3mm to 14mm Tubing Types: Nylon, Polyurethane, Polyethylene, Teflon

Tube O.D. 1/8" 1/8" 1/8" 1/8" 5/32" 5/32" 5/32"

Thread 10-32 1/16 1/8 1/4 10-32 1/8" 1/4

3/16" 3/16" 1/4" 1/4" 1/4" 1/4" 5/16" 5/16" 5/16" 5/16" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2"

1/8 1/4 10-32 1/8" 1/4" 3/8 1/8 1/4 3/8 1/2 1/8 1/4" 3/8" 1/2 1/4 3/8 1/2

Straight Male Connector Fractional Tube x Male NPT or 10-32 UNF Vendor Price Part No. No. /Each 442054 3171 53 20 $2.51 442057 3175 53 08 3.82 442058 3175 53 11 2.52 442059 3175 53 14 4.83 442055 3171 04 20 2.44 442060 3175 04 11 2.25 442061 3175 04 14 3.80 442062 442063 442056 442064 442065 442066 442067 442068 442069

3175 55 11 3175 55 14 3171 56 20 3175 56 11 3175 56 14 3175 56 18 3175 08 11 3175 08 14 3175 08 18

3.00 4.87 3.60 3.17 3.11 4.48 5.61 5.20 6.86

442070 442071 442072 442073 442074 442075 442076

3175 60 11 3175 60 14 3175 60 18 3175 60 22 3175 62 14 3175 62 18 3175 62 22

5.92 4.51 5.76 8.11 7.72 8.57 8.07

Male Elbow UNF / NPT Straight Male Connector Fractional Tube x Male BSPT Vendor Price Part No. No. /Each

0449602

3175 53 10

6.50

442136 442137

3175 04 10 3175 04 13

3.04 4.95

0450003 0450002

3175 55 10 3175 55 13

5.56 6.56

0449514 0449513

3175 56 10 3175 56 13

4.81 4.94

442140 442141 442142 0451307

3175 08 10 3175 08 13 3175 08 17 3175 08 21

5.13 5.39 5.79 5.88

0450044 0450045 0450043 0449455 0449456 0449454

3175 60 13 3175 60 17 3175 60 21 3175 62 13 3175 62 17 3175 62 21

7.31 7.50 8.69 11.69 12.00 12.13

Extended Male Elbow NPT

O.D. 1/8" 1/8" 1/8" 5/32" 5/32" 1/4" 1/4" 1/4" 5/16" 5/16" 3/8" 3/8" 3/8"

Thread 10-32 1/8 1/4 1/8" 1/4 1/8" 1/4" 3/8 1/8 1/4 1/8 1/4" 3/8"

45° Male Elbow UNF / NPT

Extended Male Elbow Fractional Tube x Male NPT Vendor Price Part No. No. /Each 0445836 0445837 0442267 0442268 0442269 0442270 0449571 0442271 0442272 0450692 0442273 0442274

3129 53 11 3129 53 14 3129 04 11 3129 04 14 3129 56 11 3129 56 14 3129 56 18 3129 08 11 3129 08 14 3129 60 11 3129 60 14 3129 60 18

5.38 5.50 6.75 8.88 5.60 5.50 7.00 8.63 9.31 7.75 8.17 9.50

Straight Male Connector NPT

45 Degree Male Elbow Fractional Tube x Male NPT or 10-32 UNF Vendor Price Part No. No. /Each 0449625 3133 53 20 $5.38 0449616 3113 53 11 3.94

0449552 0449531

3113 56 11 3113 56 14

3.81 4.13

0450062 0450706

3113 60 14 3113 60 18

5.56 5.75

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Straight Male Connector BSPT

Male Elbow BSPT

Male Elbow Fractional Tube x Male NPT or 10-32 UNF Vendor Price Part No. No. /Each 0442256 3109 53 20 $5.19 442028 3109 53 08 7.34 442029 3109 53 11 3.60 442030 3109 53 14 5.60 442031 3109 04 20 4.62 442032 3109 04 11 3.42 442033 3109 04 14 6.22 442034

3109 55 11

7.44

0442257 442035 442036 442037 442038 442039 442040

3109 56 20 3109 56 11 3109 56 14 3109 56 18 3109 08 11 3109 08 14 3109 08 18

4.88 3.65 3.95 5.66 7.20 7.71 7.27

442041 442042 442043 442044 442045 0442258 0442259

3109 60 11 3109 60 14 3109 60 18 3109 60 22 3109 62 14 3109 62 18 3109 62 22

5.84 5.71 5.85 8.37 6.47 7.75 8.63

Male Elbow Fractional Tube x Male BSPT Vendor Price Part No. No. /Each

0449617

3109 53 10

5.25

442109 442110

3109 04 10 3109 04 13

4.38 5.91

0450011

3109 55 10

7.94

0449553 0449532

3109 56 10 3109 56 13

4.88 4.94

442113 442114 442115 0451375

3109 08 10 3109 08 13 3109 08 17 3109 08 21

5.95 6.39 7.56 7.75

0450063 0450707

3109 60 13 3109 60 17

5.13 5.31

0449470 0449483 0449462

3109 62 13 3109 62 17 3109 62 21

14.31 14.44 14.88

Legris' fittings have a unique seal The ‘D’ seal within the fitting provides a positive seal on the O.D. of the tube, in both static and dynamic positions due to an optimized design of the fitting cavity.

10-25 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Push to Connect Fittings

Nylon LF3000 Push-to-Connect Fittings

10_pHyd_1-42.qxd

3/11/07

2:31 PM

Page 26

NYLON LF3000 PUSH-TO-CONNECT FITTINGS Nylon LF3000 Push-to-Connect Fittings Cont. Push to Connect Fittings

Male Branch Tee UNF / NPT

Tube O.D. 1/8" 1/8" 1/8" 1/8" 5/32" 5/32" 5/32" 3/16" 1/4" 1/4" 1/4" 5/16" 5/16" 5/16" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2"

Thread 10-32 1/16 1/8 1/4 10-32 1/8 1/4 1/8 1/8 1/4 3/8 1/8 1/4 3/8 1/8 1/4 3/8 1/2 1/4 3/8 1/2

Male Branch Tee BSPT

Male Branch Tee Fractional Tube x Male NPT/ 10-32 UNF Vendor Part No. No. Price 0442243 3108 53 20 $7.13 0442244 3108 53 08 8.00 0442245 3108 53 11 5.36 0445832 3108 53 14 5.63 442021 3108 04 20 7.95 442022 3108 04 11 5.18 442023 3108 04 14 7.80 442024 3108 55 11 8.77 442025 3108 56 11 4.77 442026 3108 56 14 5.21 442027 3108 56 18 6.33 0442246 0442247 0442248 0442249 0442250 0442251 0442252 0442253 0442254 0442255

3108 08 11 3108 08 14 3108 08 18 3108 60 11 3108 60 14 3108 60 18 3108 60 22 3108 62 14 3108 62 18 3108 62 22

7.16 7.56 7.50 9.89 7.16 8.40 10.50 9.13 11.44 12.94

Male Branch Tee Fractional Tube x Male BSPT Vendor Part No. No. Price

0451592

3108 53 10

12.19

0442491 0442492

3108 04 10 3108 04 13

6.36 8.32

0449551 0449530

3108 56 10 3108 56 13

6.69 6.75

442154 442155 0442494

3108 08 10 3108 08 13 3108 08 17

7.39 8.05 7.75

0450061 0450705

3108 60 13 3108 60 17

7.06 7.38

Female Elbow NPT

Tube O.D. 1/8" 1/8" 1/8" 5/32" 5/32" 5/32" 3/16" 3/16" 1/4" 1/4" 1/4" 5/16" 5/16" 3/8" 3/8" 3/8" 1/2" 1/2"

Thread 10-32 1/8 1/4 10-32 1/8 1/4 1/8 1/4 10-32 1/8 1/4 1/8 1/4 1/8 1/4 3/8 3/8 1/2

Male Run Tee UNF / NPT

Female Branch Tee NPT

Male Run Tee Fractional Tube x Male NPT/ 10-32 UNF Vendor Part No. No. Price 0442226 3103 53 20 $7.25 0442227 3103 53 08 7.31 0442228 3103 53 11 5.56 0442229 0442230 0442231 0442232 442165 442166 442167

3103 04 20 3103 04 11 3103 04 14 3103 55 11 3103 56 11 3103 56 14 3103 56 18

8.04 5.57 7.69 9.68 5.06 5.14 6.07

0442233 0442234 0442235 0442236 0442237 0442238 0442239 0442240 0442241 0442242

3103 08 11 3103 08 14 3103 08 18 3103 60 11 3103 60 14 3103 60 18 3103 60 22 3103 62 14 3103 62 18 3103 62 22

7.00 7.25 7.50 9.19 7.81 9.08 11.80 9.13 11.44 12.94

Female Branch Tee Fractional Tube x NPT Vendor Part No. No. Price

Straight Female Connector Fractional Tube x NPT Vendor Part No. No. Price

0442206

3009 53 11

6.52

0442215

3008 53 11

7.73

0442260 442082

3014 53 11 3014 53 14

4.15 5.82

0442207 0442208

3009 04 11 3009 04 14

5.31 7.64

0442216 0442217

3008 04 11 3008 04 14

6.42 7.69

442083 442084 0442261 0442262

3014 04 11 3014 04 14 3014 55 11 3014 55 14

5.25 6.87 5.13 16.69

0442209 0442210 0442211 0442212

3009 56 11 3009 56 14 3009 08 11 3009 08 14

4.13 6.13 8.31 9.28

0442218 0442219 0442220 0442221

3008 56 11 3008 56 14 3008 08 11 3008 08 14

5.87 7.44 6.69 10.56

0442213

3009 60 14

7.56

0442222

3008 60 14

9.06

0442214

3009 62 18

11.85

0442223

3008 62 18

13.14

442085 0442263 0442264 0442265 0450694 442086 0442266 0445829 0445830

3014 56 11 3014 56 14 3014 08 11 3014 08 14 3014 60 11 3014 60 14 3014 60 18 3014 62 18 3014 62 22

4.07 5.60 7.13 7.13 6.75 8.39 9.12 8.56 8.94

HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

“Y” Male NPT

Male Standpipe NPT / 10-32 UNF Vendor Part No. No. Price

“Y” Male Fractional Tube x NPT Vendor Part No. No. Price

0442275 0442276 0442277

3131 04 20 3121 04 11 3121 04 14

10.63 3.00 3.56

0442284 0442285

3148 04 11 3148 04 14

6.99 6.53

0449555 0445835

3121 56 11 3121 56 14

4.06 3.06

0442286 0442287

3148 56 11 3148 56 14

8.09 7.00

0442280 0442281

3121 60 14 3121 60 18

3.19 3.69

0445839 0445840

3148 60 14 3148 60 18

9.50 11.38

Single Banjo

Straight Female Connector NPT

Female Elbow Fractional Tube x NPT Vendor Part No. No. Price

10-26

Male Standpipe UNF / NPT

“Y” Single Banjo Fractional Tube x NPT / 10-32 UNF Vendor Part No. No. Price 0442294 3118 53 20 $5.46

442046 0400179

3118 04 20 3018 04 11

5.37 13.50

0442295 0400180 0442290

3118 56 20 3018 56 11 3018 56 14

9.31 13.50 11.56

“Y” Fractional Tube x Tube Vendor Part No. No. Price 0442636

3140 53 00

4.19

442122

3140 04 00

4.50

0442225 442125

3140 56 00 3140 08 00

4.98 6.50

0442184

3140 60 00

8.77

10_pHyd_1-42.qxd

3/11/07

2:31 PM

Page 27

NYLON LF3000 PUSH-TO-CONNECT FITTINGS

Union Elbow / Unequal Union Elbow

Union / Unequal Union Tube O.D. x Tube O.D. 1/8" x 1/8" 1/8" x 1/4" 5/32" x 5/32" 5/32"x 1/4" 3/16" x 3/16" 1/4" x 1/8" 1/4" x 1/4" 1/4" x 3/8" 5/16" x 5/16" 3/8" x 1/4" 3/8" x 3/8" 3/8" x 1/2" 1/2" x 1/2"

Union / Unequal Union Fractional Tube x Tube Vendor Price Part No. No. /Each 442047 3106 53 00 $3.69 0442940 3106 53 56 4.31 442048 3106 04 00 3.07 0450932 3106 04 56 3.81 442018 3106 55 00 4.19

Union Elbow / Unequal Elbow Fractional Tube x Tube Vendor Price Part No. No. /Each 0442305 3102 53 00 $3.88 0442936 3102 53 56 3.88 442098 3102 04 00 3.49 0450931 3102 04 56 3.50 442000 3102 55 00 5.29

442019

3106 56 00

3.72

442001

3102 56 00

4.27

442020 0442941 442049

3106 08 00 3106 60 56 3106 60 00

4.91 7.13 4.86

442002 0442937 442003

3102 08 00 3102 60 56 3102 60 00

5.50 7.69 5.99

442050

3106 62 00

8.21

442004

3102 62 00

8.30

Plug-In Elbow Tube O.D. x Tube O.D. 1/8" x 5/32" 1/8" x 1/8" 1/8" x 3/16" 1/8" x 1/4" 5/32" x 5/32" 5/32" x 1/8" 5/32" x 3/16" 5/32" x 1/4" 5/32" x 5/16" 5/32" x 3/8" 3/16" x 3/16" 3/16" x 1/4" 3/16" x 5/16" 1/4" x 3/16" 1/4" x 1/4" 1/4" x 5/16" 1/4" x 3/8" 1/4" x 1/2" 5/16" x 3/8" 5/16" x 1/2" 3/8" x 5/16" 3/8" x 3/8" 3/8" x 1/2" 1/2" x 1/2"

Tee / Unequal Tee Fractional Tube x Tube x Tube Vendor Price Part No. No. /Each 442005 3104 53 00 $5.50 0445831 3104 53 56 5.94 442006 3104 04 00 4.82 0450933 3104 04 56 4.94 442007 3104 55 00 7.32 0451989 3104 56 53 5.50 442008 3104 56 00 5.44 0449578 3104 56 60 8.63 442009 3104 08 00 6.97 442010 0450054 442011

Plug-In “Y” Plug-In “Y” Fractional Tube x Tube Vendor Price Part No. No. /Each

0445842

0442185

2.00

3142 53 00

3182 04 00

1.75

0445841

3182 04 56

4.88

0442204

3182 56 00

1.81

0449572

3182 56 60

4.38

0450708

3182 60 00

4.31

0449463

3182 62 00

5.38

0400140

3142 56 00

4.12

3142 60 00

Elbow Bulkhead Fractional Tube x Tube Vendor Price Part No. No. /Each 0449585 3139 53 00 $7.25

0442301

3116 04 00

5.12

0442592

3139 04 00

13.04

442080

3116 56 00

5.88

0449492

3139 56 00

7.56

442081

3116 08 00

7.88

0442594

3139 08 00

16.59

0442304

3116 60 00

7.94

0450021

3139 60 00

10.69

0445833

3116 62 00

11.38

0449435

3139 62 00

13.00

1.45 1.44 3.21 5.69

0442195 0442196

3166 55 56 3166 55 08

2.66 2.63

6.38 3166 56 08 3166 56 60 3166 56 62 3166 08 60 3166 08 62

Barbed Connector Barbed Connector Fractional Tube x Tube Vendor Price Part No. No. /Each

442051

3126 53 00

1.43

442052

3126 04 00

0.44

442053

3126 55 00

1.48

0442224

3126 56 00

1.07

0442365

3126 60 00

2.29

0442366

3126 62 00

2.54

0442368 0442369

3122 04 05 3122 04 53

3.08 1.47

0442370

3122 56 55

5.92

0442373

3122 60 08

4.62

2.15 1.95 5.62 2.50 6.99

6.63 3166 60 62

Plug Plug Fractional Tube x Tube Vendor Price Part No. No. /Each

4.52 4.00

3166 04 55 3166 04 56 3166 04 08 3166 54 60

0442320

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

3166 53 55 3166 53 56

0442191 0442192 0442193 0442194

0442198 0442199 0442200 0442201 0442202 0400141

7.41 10.88 11.39

Reducer Fractional Tube x Tube x Tube Vendor Price Part No. No. /Each 0442188 3166 53 04 $4.00 0442189 0442190

0442203

3104 60 00 3104 60 62 3104 62 00

Elbow Bulkhead

Bulkhead Union Fractional Tube x Tube Vendor Price Part No. No. /Each 442077 3116 53 00 $5.28

Reducer

Plug-In Elbow Fractional Tube x Tube Vendor Price Part No. No. /Each 3182 53 00

Bulkhead Union

Tee / Unequal Tee

Push to Connect Fittings

Nylon LF3000 Push-to-Connect Fittings Cont.

3.19

10-27 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_1-42.qxd

3/11/07

2:32 PM

Page 28

NYLON LF3000 PUSH-TO-CONNECT FITTINGS Nylon LF3000 Push-to-Connect Fittings Cont. Push to Connect Fittings

Fractional Fittings Kit Part #0442939 • Kit contains: 22 popular items and sizes (166 total pieces) • Glass-filled, nylon constructed • Easy to use push-in-connection • Compatible with Nylon, Polyurethane, and Polyethylene tubing • Seals tubing with an O-ring with a ‘D’ seal, which provides a positive seal on the O.D. of the tube

Part No. 0442939

Description Fractional Fittings Kit

Price /Each $589.00

Kit Components Tube O.D. 1/8" 5/32" 1/4" 1/4" 3/8" 3/8" 5/32" 1/4" 1/4" 3/8" 3/8" 3/8" 5/32" 1/4" 3/8" 5/32 1/4 3/8 5/32 1/4" 3/8

Thread 1/8" 1/8" 1/8" 1/4" 1/4" 3/8" 1/8 1/8" 1/4" 1/8" 1/4" 3/8"

1/4" 3/8"

10-28 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Type Straight Male Connector Fractional Tube x Male NPT Straight Male Connector Fractional Tube x Male NPT Straight Male Connector Fractional Tube x Male NPT Straight Male Connector Fractional Tube x Male NPT Straight Male Connector Fractional Tube x Male NPT Straight Male Connector Fractional Tube x Male NPT Male Elbow Fractional Tube x Male NPT Male Elbow Fractional Tube x Male NPT Male Elbow Fractional Tube x Male NPT Male Elbow Fractional Tube x Male NPT Male Elbow Fractional Tube x Male NPT Male Elbow Fractional Tube x Male NPT Union / Unequal Union Fractional Tube x Tube Union / Unequal Union Fractional Tube x Tube Union / Unequal Union Fractional Tube x Tube “Y” Connector “Y” Fractional Tube x Tube “Y” Fractional Tube x Tube Tee / Unequal Tee Fractional Tube x Tube x Tube Tee / Unequal Tee Fractional Tube x Tube x Tube Tee / Unequal Tee Fractional Tube x Tube x Tube Tubing Cutter

Part No. 442058 442060 442064 442065 442071 442072 442032 442035 442036 442041 442042 442043 442048 442019 442049 0442182 0442225 0442184 442006 442008 442010 0450606

Pkg. Qty. 10 10 10 10 5 5 10 10 10 5 5 5 10 10 5 10 10 5 10 5 5 1

10_pHyd_1-42.qxd

3/11/07

2:32 PM

Page 29

NYLON LF3000 PUSH-TO-CONNECT FITTINGS Push to Connect Fittings

Nylon LF3000 Push-to-Connect Fittings Cont.

Nylon LF3000 Metric Push-to-Connect Fittings

Straight Male Connector BSPT

Straight Male Connector BSPP, M3, M5, M7

Male Elbow BSPT

Male Elbow BSPP, M3, M5, M7

Extended Male Elbow BSPT

45°

Straight Male Connector Straight Male Connector Metric Tube x Male Male Elbow Tube x Male BSPT BSPP, M3, M5 or M7 Tube x Male BSPT Vendor Vendor Vendor Tube O.D. Thread Part No. No. Price Part No. No. Price Part No. No. Price 3mm M3 0450746 3101 03 09 $5.88 3mm M5 0450747 3101 03 19 5.75 4mm M3 0450887 3101 04 09 4.25 4mm M5 442087 3101 04 19 3.98 4mm M7 0450891 3101 04 55 4.06 4mm 1/8 442136 3175 04 10 3.04 442088 3101 04 10 3.39 442109 3109 04 10 4.38 4mm 1/4 442137 3175 04 13 4.95 442089 3101 04 13 5.01 442110 3109 04 13 5.91 6mm M5 442090 3101 06 19 5.90

Male Elbow Metric Tube x BSPP, Extended Male Elbow 45 Degree Male Elbow M3, M5 or M7 Metric Tube x Male BSPT Metric Tube x Male BSPT Vendor Vendor Vendor Part No. No. Price Part No. No. Price Part No. No. Price 0450718 3199 03 09 $5.75 0450727 3199 03 19 5.63 0450779 3199 04 09 5.88 0442475 3199 04 19 3.94 0450799 3199 04 55 3.50 0442476 3199 04 10 4.46 0442426 3129 04 10 12.65 0450852 3113 04 10 3.75 0442477 3199 04 13 7.56 0442427 3129 04 13 10.95 0442478 3199 06 19 4.46

6mm 6mm 6mm 6mm 6mm 8mm 8mm 8mm 8mm 10mm 10mm 10mm 12mm 12mm 12mm 14mm 14mm

0451992 0442479 0442480 0451032 0450993 0442481 0442482 0442483 0451193 0442484 0442485 0442486 0442487 0442488 0449774 0442489 0442490

M7 1/8 1/4 3/8 1/2 1/8 1/4 3/8 1/2 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2

442138 442139 0451131 0451103 442140 442141 442142 0451307 442143 442144 442145 0442396 0442397 0442398 0442399 0442400

3175 06 10 3175 06 13 3175 06 17 3175 06 21 3175 08 10 3175 08 13 3175 08 17 3175 08 21 3175 10 13 3175 10 17 3175 10 21 3175 12 13 3175 12 17 3175 12 21 3175 14 17 3175 14 21

3.46 4.01 3.94 5.56 5.13 5.39 5.79 5.88 6.12 6.81 8.38 7.42 7.60 9.20 9.58 9.98

0451179 442091 442092 0451178 0451169 442093 442094 442095 0451367 442096 442097 0442401 0442402 0442403 0442404 0442405 0442406

3101 06 55 3101 06 10 3101 06 13 3101 06 17 3101 06 21 3101 08 10 3101 08 13 3101 08 17 3101 08 21 3101 10 13 3101 10 17 3101 10 21 3101 12 13 3101 12 17 3101 12 21 3101 14 17 3101 14 21

5.69 3.91 4.58 4.19 5.88 5.54 5.40 7.72 7.69 8.93 9.59 12.63 11.76 8.01 13.03 9.58 10.63

Male Branch Tee BSPT

Tube O.D. 4mm 4mm 6mm 6mm 6mm 8mm 8mm 8mm 10mm 10mm 10mm 12mm 12mm 12mm 14mm 14mm

Thread 1/8 1/4 M5 1/8 1/4 1/8 1/4 3/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2

3109 06 10 3109 06 13 3109 06 17 3109 06 21 3109 08 10 3109 08 13 3109 08 17 3109 08 21 3109 10 13 3109 10 17 3109 10 21 3109 12 13 3109 12 17 3109 12 21 3109 14 17 3109 14 21

4.45 4.50 3.88 6.38 5.95 6.39 7.56 7.75 11.03 10.51 10.95 12.13 13.13 13.53 13.50 17.57

3199 06 55 3199 06 10 3199 06 13 3199 06 17 3199 06 21 3199 08 10 3199 08 13 3199 08 17 3199 08 21 3199 10 13 3199 10 17 3199 10 21 3199 12 13 3199 12 17 3199 12 21 3199 14 17 3199 14 21

Male Branch Tee BSPP, M5

Male Branch Tee Metric Tube x Male BSPT Vendor Part No. No. 0442491 3108 04 10 0442492 3108 04 13

Price 6.36 8.32

0442493 442153 442154 442155 0442494 442156 0442495 0442496 0442497 0442498 0442499 0442500 0442501

6.06 6.53 7.39 8.05 7.75 15.52 15.65 15.46 17.19 17.19 18.39 18.81 19.54

3108 06 10 3108 06 13 3108 08 10 3108 08 13 3108 08 17 3108 10 13 3108 10 17 3108 10 21 3108 12 13 3108 12 17 3108 12 21 3108 14 17 3108 14 21

442111 442112 0451187 0451180 442113 442114 442115 0451375 0442457 0442458 0442459 0442460 0442461 0442462 0442463 0442464

Male Branch Tee Metric Tube x BSPP or M5 Vendor Part No. No. Price 0442531 3198 04 10 6.12 0442532 3198 04 13 9.17 0442533 3198 06 19 7.64 0442534 3198 06 10 6.68 0442535 3198 06 13 7.96 0442536 3198 08 10 8.32 0442537 3198 08 13 12.15 0442538 3198 08 17 11.16 0442539 3198 10 13 15.25 0442540 3198 10 17 16.11

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

3.50 4.77 6.85 6.19 6.19 7.48 7.01 9.50 7.88 10.62 12.62 7.74 13.25 12.87 13.13 14.12 13.69

0442428 3129 06 10 9.50 0451122 3113 06 10 0442429 3129 06 13 15.76 0451108 3113 06 13

4.00 4.75

0442430 3129 08 10 14.98 0451324 3113 08 10 0442431 3129 08 13 16.21 0451313 3113 08 13 0442432 3129 08 17 14.29 0451335 3113 08 17

4.19 4.94 5.50

0442433 3129 10 13 8.59 0449717 0442434 3129 10 17 16.59 0449724 0449713 0449835 0449840 0449829

5.63 6.38 10.06 9.44 9.94 10.75

0449915 3129 14 21 16.50

Male Run Tee BSPP, M5

Male Run Tee BSPT Male Run Tee Metric Tube x Male BSPT Vendor Part No. No. Price 442149 3103 04 10 6.47 0442502 3103 04 13 8.54 442150 442151 442152 0442503 0442504 0442505 0442506

3113 10 13 3113 10 17 3113 10 21 3113 12 13 3113 12 17 3113 12 21

3103 06 10 3103 06 13 3103 08 10 3103 08 13 3103 08 17 3103 10 13 3103 10 17

6.43 6.53 8.17 8.42 8.14 15.06 15.12

Male Run Tee Metric Tube x BSPP or M5 Vendor Part No. No. Price 0442514 3193 04 10 $6.84 0442515 3193 04 13 9.39 0442516 3193 06 19 8.14 0442517 3193 06 10 6.68 0442518 3193 06 13 7.96 0442519 3193 08 10 8.32 0442520 3193 08 13 8.60 0400195 3193 08 17 8.31 0442522 3193 10 13 14.56 0442523 3193 10 17 16.11

10-29 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_1-42.qxd

3/11/07

2:32 PM

Page 30

NYLON LF3000 PUSH-TO-CONNECT FITTINGS Nylon LF3000 Push-to-Connect Fittings Cont. Push to Connect Fittings “Y” BSPT

“Y” BSPP, M5

“Y” Male “Y” Male Metric Tube x BSPT Metric Tube x BSPP or M5 Vendor Vendor Tube O.D. Thread Part No. No. Price Part No. No. Price 4mm M5 0450786 3158 04 19 $6.50 4mm 1/8 0442407 3148 04 10 7.73 0442413 3158 04 10 10.62 4mm 1/4 0442408 3148 04 13 7.96 6mm M5 6mm 1/8 0442409 3148 06 10 7.29 0442415 3158 06 10 10.45 6mm 1/4 0442410 3148 06 13 8.01 0442416 3158 06 13 8.59 8mm 1/8 0442411 3148 08 10 7.86 0442417 3158 08 10 13.59 8mm 1/4 0442412 3148 08 13 8.59 0442418 3158 08 13 14.52 8mm 3/8 0451340 3148 08 17 9.69 0451246 3158 08 17 14.56 10mm 1/4 10mm 3/8 12mm 3/8 12mm 1/2

Tube O.D. (mm) 3mm 3mm 4mm 4mm 6mm 6mm 6mm 6mm 8mm 8mm 8mm 10mm 10mm 12mm 12mm 12mm 14mm

Tube O.D. 3mm 4mm 6mm 8mm 6mm 4mm 8mm 10mm 8mm 6mm 10mm 8mm 12mm 12mm 10mm 14mm 14mm

Union / Unequal Union Metric Tube x Tube Vendor Part No. No. Price 0450738 3106 03 00 $3.88 0450745 3106 03 04 3.38 0442578 3106 04 06 6.97 0442579 3106 04 08 7.32 442013 3106 06 00 3.94 0442580 0442581

3106 06 08 3106 06 10

7.54 9.50

Single Banjo BSPP, M5

Single Banjo BSPT

Female Elbow Straight Female Connector Single Banjo Single Banjo Metric Tube x BSPP Metric Tube x BSPP or M5 Metric Tube x BSPT Metric Tube x BSPP or M5 Vendor Vendor Vendor Vendor Part No. No. Price Part No. No. Price Part No. No. Price Part No. No. Price 0442419 3114 04 19 $8.90 442160 3118 04 19 $6.57 0442603 3192 04 10 2.95 0442420 3114 04 10 5.30 442161 3118 04 10 6.87 0442604 3192 04 13 4.11 0442421 3114 04 13 7.06 0451042 3118 06 19 8.63 0442605 3192 06 10 3.06 442157 3114 06 10 5.13 0451117 3018 06 10 6.44 442162 3118 06 10 6.87 0442606 3192 06 13 4.16 442158 3114 06 13 5.68 0451104 3018 06 13 8.31 442163 3118 06 13 8.77 0442607 3192 08 10 3.58 442159 3114 08 10 6.44 0451320 3018 08 10 7.94 442164 3118 08 10 8.37 0442608 3192 08 13 4.28 0442422 3114 08 13 6.42 0451308 3018 08 13 8.81 0451194 3118 08 13 8.88 0451243 3114 08 17 7.44 0451331 3018 08 17 10.69 0451231 3118 08 17 10.69 0442610 3192 10 13 7.68 0449642 3114 10 13 8.94 0449715 3018 10 13 13.50 0449638 3118 10 13 13.50 0442611 3192 10 17 6.02 0442423 3114 10 17 10.39 0449648 3118 10 17 12.31 0442424 3114 12 17 13.15 0442425 3114 12 21 16.44

Union Elbow / Unequal Union Elbow

Union / Unequal Union

Straight Female Connector BSPP, M5

Female Elbow BSPP

Elbow Bulkhead

Tee/Unequal Tee

Bulkhead Union

Union Elbow / Unequal Elbow Metric Tube x Tube Vendor Part No. No. Price

Tee / Unequal Tee Metric Tube x Tube x Tube Vendor Part No. No. Price 0450736 3104 03 00 $5.56

Bulkhead Union Metric Tube x Tube Vendor Part No. No. Price

Elbow Bulkhead Metric Tube x Tube Vendor Part No. No. Price

0450877

3102 04 06

3.69

0450875

3104 04 06

5.00

442099

3102 06 00

4.10

5.56

0442593

3139 06 00

11.96

4.31

5.32 5.00 6.38

3116 06 00

3102 06 08

3104 06 00 3104 06 04 3104 06 08

0442621

0451168

442105 0451148 0451167

442100

3102 08 00

4.34

0442623

3116 10 00

9.19

0442595

3139 10 00

19.99

0442624

3116 12 00

12.44

0442596

3139 12 00

23.92

0442625

3116 14 00

16.69

0442597

3139 14 00

43.81

0442582 442015 0449751 442016

3106 08 10 3106 10 00 3106 10 12 3106 12 00

9.52 9.57 9.94 11.85

0451353 442101 0449750 442102

3102 08 10 3102 10 00 3102 10 12 3102 12 00

8.50 8.93 10.69 11.29

0451361 0451352 442107 0449749 442108 0449850

3104 08 06 3104 08 10 3104 10 00 3104 10 12 3104 12 00 3104 12 10

5.88 12.38 12.90 14.31 15.51 14.31

0451990 442017

3106 12 14 3106 14 00

13.56 15.72

442103

3102 14 00

13.50

0442583

3104 14 00

19.22

Fleet Needs? Check out the full line of Legris Push-To-Connect DOT fittings and tubing on page 10-179! 10-30 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_1-42.qxd

3/11/07

2:32 PM

Page 31

NYLON LF3000 & SS LF3800 PUSH-TO-CONNECT FITTINGS

Plug-In Elbow

Tube O.D. (mm) 4mm 4mm 4mm 6mm 6mm 6mm 6mm 6mm 8mm 8mm 8mm 10mm 10mm 10mm 10mm 12mm 12mm 14mm

Tube O.D. 4mm 6mm 8mm 6mm 4mm 5mm 8mm 10mm 8mm 10mm 12mm 10mm 8mm 12mm 14mm 12mm 14mm 14mm

Plug-In Elbow Tube x Tube Vendor Part No. No. 442146 3182 04 00 0450868 3182 04 06 442148 442147

3182 06 00 3182 06 04

Plug-In “Y”

Price /Each $1.76 2.63 2.11 2.45

Plug-In “Y” Metric Tube Vendor Part No. No. 0442186 3142 04 00

0451153

3182 08 00 3182 08 10

2.13 4.88

0451366

0442633

3182 10 00

4.88

0449740

3182 12 00

4.23

Price /Each $6.25

Reducer Metric Tube Vendor Part No. No. 442129 442130

0442205 0451348

0442634

Reducer

0449856

3142 06 00

3142 08 00

3142 10 00

3142 12 00

3166 04 06 3166 04 08

Barbed Connector

Plug

Price /Each

Plug Metric Tube Vendor Part No. No. 442116 3126 04 00

Price /Each $0.50

Barbed Connector Metric Tube Vendor Price Part No. No. /Each

2.91 2.81

3.56

442117

442132 442133

3166 06 08 3166 06 10

3.26 3.64

0442626 0442627

3166 08 10 3166 08 12

4.19 4.89

3.75

5.50 0442629 0442630

3166 10 12 3166 10 14

7.94 9.55

0442631

3166 12 14

11.76

7.31

3126 06 00

1.32

442118

3126 08 00

1.48

442119

3126 10 00

2.97

442120

3126 12 00

4.50

442121

3126 14 00

5.00

0442694

3122 06 05

3.01

0442698

3122 10 08

3.74

Stainless Steel LF3800 Push-to-Connect Fittings Specifications for Stainless Steel Push-To-Connect Fittings(LF3800 System) Compatible Fluids: All fluids compatible with fitting and tubing material. Body Material: Stainless Steel AISI 316 Body Seal: FKM “O” Ring Seal Pressure Rating: 0-290 PSI Temperature Range: -4°F to 250°F Thread Sizes: 1/8" to 1/2" Thread Types: NPT, BSPT, BSPP, UNF, Metric Tubing Types: Nylon, Polyurethane, Polyethylene, Teflon, Steel, Copper Industrial Applications: Chemical, Food, Packaging, Medical

Straight Male Connector NPT

Male Elbow NPT / UNF

Male Standpipe NPT

Union

Union Fractional Tube x Tube Vendor Price Part No. No. /Each 0442852 3806 04 00 $32.84

Bulkhead Union Fractional Tube x Male NPT Vendor Price Part No. No. /Each 0442858 3816 04 00 $45.08

0442853

3806 55 00

45.56

0442859

3816 55 00

70.75

0442854

3806 56 00

44.31

0442860

3816 56 00

90.38

0442855

3806 08 00

41.42

0442861

3816 08 00

59.69

0442856

3806 60 00

61.38

0442862

3816 60 00

99.63

0442857

3806 62 00

79.56

0442863

3816 62 00

113.67

Bulkhead Union UNF / NPT

Stainless Steel LF3800 Fractional Push-to-Connect Fittings

Tube O.D. 5/32" 5/32" 5/32" 3/16" 3/16" 3/16 1/4" 1/4" 1/4" 5/16" 5/16" 5/16" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2"

Straight Male Connector Fractional Tube x Male NPT Vendor Price Part No. No. /Each

Male Elbow Fractional Tube x Male NPT 10-32 UNF Vendor Price Part No. No. /Each

Male Standpipe Fractional Tube x NPT Vendor Price Part No. No. /Each

10-32 1/8

0442813

3805 04 11

29.13

0442848 0442836

3899 04 20 3889 04 11

60.85 48.80

0442825

3821 04 11

12.43

1/8 1/4

0442814 0442815

3805 55 11 3805 55 14

30.64 47.43

0442837 0442838

3889 55 11 3889 55 14

55.45 61.60

0442826

3821 55 11

19.63

1/8 1/4

0442816 0442817

3805 56 11 3805 56 14

41.65 41.69

0442839 0442840

3889 56 11 3889 56 14

57.19 64.06

0442827 0442828

3821 56 11 3821 56 14

24.17 32.84

1/8 1/4

0442818 0442819

3805 08 11 3805 08 14

42.65 48.73

0442841 0442842

3889 08 11 3889 08 14

68.45 64.44

0442829 0442830

3821 08 11 3821 08 14

17.47 20.02

1/4 3/8

0442820 0442821

3805 60 14 3805 60 18

49.44 51.69

0442843 0442844

3889 60 14 3889 60 18

104.31 112.08

0442831 0442832

3821 60 14 3821 60 18

29.27 28.05

1/4 3/8 1/2

0442822 0442823 0442824

3805 62 14 3805 62 18 3805 62 22

60.69 68.15 72.46

0442845 0442846 0442847

3889 62 14 3889 62 18 3889 62 22

120.94 134.34 147.58

0442833 0442834 0442835

3821 62 14 3821 62 18 3821 62 22

39.47 45.80 43.04

Thread

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

10-31 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Push to Connect Fittings

Nylon LF3000 Push-to-Connect Fittings Cont.

10_pHyd_1-42.qxd

3/11/07

2:32 PM

Page 32

SS LF3800 PUSH-TO-CONNECT, FLOW CONTROLS Stainless Steel LF3800 Push-to-Connect Fittings Cont. Push to Connect Fittings

Stainless Steel LF3800 Metric Push-to-Connect Fittings

Straight Male Connector BSPT

Male Elbow NPT / UNF

Male Standpipe NPT

Bulkhead Union UNF / NPT

Union

Stainless Steel LF3800 Metric Push-to-Connect Fittings

Tube O.D. 4mm 4mm 4mm 6 mm 6mm 6mm 8mm 8mm 8mm 8mm 10mm 10mm 10mm 12mm

Thread

Straight Male Connector Metric Tube x BSPT Vendor Price Part No. No. /Each

Male Elbow Tube x Male NPT 10-32 UNF Vendor Price Part No. No. /Each

Male Standpipe Tube x NPT Vendor Price Part No. No. /Each

1/8 1/4

0442876 0442877

3805 04 10 3805 04 13

20.48 26.44

0442836

3889 04 11

48.80

0442825

3821 04 11

12.43

1/8 1/4

0442878 0442879

3805 06 10 3805 06 13

23.65 27.06

0448923 0448917

3889 06 11 3889 06 14

53.94 60.81

0448926 0448919

3821 06 11 3821 06 14

28.13 32.31

1/8 1/4 3/8

0442880 0442881 0442882

3805 08 10 3805 08 13 3805 08 17

32.64 31.88 48.10

0442841 0442842

3889 08 11 3889 08 14

68.45 64.44

0442829 0442830

3821 08 11 3821 08 14

17.47 20.02

1/4 3/8

0442883 0442884

3805 10 13 3805 10 17

47.76 45.07

0448876 0448882

3889 10 14 3889 10 18

81.44 101.56

0448878 0448884

3821 10 14 3821 10 18

22.25 77.50

Union Tube x Tube Vendor Part No. No. 0442852 3806 04 00

Price /Each $32.84

Bulkhead Union Tube x Male NPT Vendor Price Part No. No. /Each 0442858 3816 04 00 $45.08

0442917

3806 06 00

35.41

0442922

3816 06 00

51.68

0442855

3806 08 00

41.42

0442861

3816 08 00

59.69

0442919

3806 10 00

70.35

0442924

3816 10 00

67.10

0442920

3806 12 00

65.46

0442925

3816 12 00

112.94

Fractional and Metric Flow Control Regulators Specifications for Flow Control Regulators Flow Control Regulators: Fluids: Compressed air Body Material: Nylon 6.6 Seal: Nitrile Pressure Rating: 15-145 PSI Temperature Range: 30°F to 160°F Thread Sizes: 1/8" to 1/2" Thread Types: NPT, BSPT, BSPP, UNF, Metric Tubing Types: Nylon, Polyurethane, Polyethylene

Compact Meter Out

Compact Meter In

Compact Bi-Directional

Compact Swivel Outlet

Fractional Compact Flow Control Regulators

Tube O.D. 5/32" 5/32" 1/4" 1/4" 3/8" 3/8"

Thread 1/8 1/4 1/8 1/4 1/4 3/8

Compact Flow Control Meter Out - Tube to NPT Vendor Part No. No. Price 0445780 7065 04 11 $15.85 0445912 7065 04 14 19.50 442172 7065 56 11 17.94 442173 7065 56 14 20.47 442174 7065 60 14 34.67 442175 7065 60 18 39.33

Compact Flow Control Meter In - Tube to NPT Vendor Part No. No. Price 0450935 7066 04 11 $15.63

Compact Flow Control Bi-Directional - Tube to NPT Vendor Part No. No. Price 0450934 7067 04 11 $15.63

Compact Swivel Outlet Tube to NPT Vendor Part No. No. Price

0449543 0449520

0449542 0449519

0449544 0449521 0449219 0449224

7066 56 11 7066 56 14

17.19 18.75

7067 56 11 7067 56 14

17.19 18.75

7045 56 11 7045 56 14 7045 60 14 7045 60 18

19.50 21.13 31.19 37.50

Metric Compact Flow Control Regulators

Tube O.D. 6mm 8mm 8mm 10mm 10mm 10mm 12mm 12mm 12mm 4mm 6mm 6mm 8mm 8mm 8mm

Thread 1/8 BSPT 1/8 BSPT 1/4 BSPT 1/4 BSPT 3/8 BSPT 1/2 BSPT 1/4 BSPT 3/8 BSPT 1/2 BSPT 1/8 BSPP 1/8 BSPP 1/4 BSPP 1/8 BSPP 1/4 BSPP 3/8 BSPP

Part No. 0451120 0451322 0451311 0449045 0449047 0449043 0449081 0449085 0449078 0445782 0442783 0442784 0442785 0442786 0451232

10-32 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Compact Flow Control Meter Out - Metric Tube to BSPT or BSPP Vendor No. 7065 06 10 7065 08 10 7065 08 13 7065 10 13 7065 10 17 7065 10 21 7065 12 13 7065 12 17 7065 12 21 7060 04 10 7060 06 10 7060 06 13 7060 08 10 7060 08 13 7060 08 17

Price $17.19 20.25 20.25 31.19 37.50 41.94 39.00 39.00 40.63 15.85 20.14 18.88 20.51 22.25 21.94

Part No. 0451119 0451321 0451310

Compact Flow Control Bi-Directional - Metric Tube to BSPT Vendor No. 7067 06 10 7067 08 10 7067 08 13

Price $17.19 20.25 20.25

10_pHyd_1-42.qxd

3/11/07

2:33 PM

Page 33

MINIATURE FLOW CONTROL REGULATORS

Fractional Miniature Flow Control Regulators

Knobless Compact Meter Out

Miniature Meter In

Miniature Meter Out

Knobless Miniature Meter Out

Fractional Miniature Flow Control Regulators

Tube O.D. 1/8" 1/8" 5/32" 5/32" 1/4" 1/4" 1/4" 5/16" 5/16" 3/8" 3/8"

Thread 10-32 1/8 10-32 1/8 10-32 1/8 1/4 1/8 1/4 1/4 3/8

Miniature Flow Control Meter Out -Tube to UNF or NPT Vendor Part No. No. Price 0449624 7660 53 20 $14.06 0449618 7665 53 11 14.13 442168 7660 04 20 16.68 442169 7665 04 11 17.63 0442802 7660 56 20 17.19 442170 7665 56 11 19.69 442171 7665 56 14 19.23

Miniature Flow Control Meter In -Tube to UNF or NPT Vendor Part No. No. Price 0449623 7669 53 20 $13.88 0450951 0450939 0449566 0449554 0449533

7669 04 20 7668 04 11 7669 56 20 7668 56 11 7668 56 14

14.06 14.13 17.19 17.19 17.19

Knobless Compact Flow Control Meter Out - Tube to UNF or NPT Vendor Part No. No. Price 0449621 7010 53 20 $17.38 0449615 7015 53 11 14.13 0450950 7010 04 20 17.38 0450938 7015 04 11 15.63 0449565 7010 56 20 18.38 0449550 7015 56 11 17.19 0449529 7015 56 14 18.75 0450909 7015 08 11 21.00 0450906 7015 08 14 21.75 0449221 7015 60 14 31.19 0449225 7015 60 18 37.50

Knobless Miniature Flow Control Meter Out - Tube to UNF or NPT Vendor Part No. No. Price 0449622 7620 53 20 $14.06 0449614 7625 53 11 15.63 0442808 7620 04 20 16.22 0442810 7625 04 11 17.25 0442809 7620 56 20 19.14 0442811 7625 56 11 18.97 0442812 7625 56 14 20.12

Metric Miniature Flow Control Regulators

Metric Miniature Flow Control Regulators

Tube O.D. 4mm 6mm 6mm 6mm 8mm 8mm 8mm 4mm 4mm 6mm 6mm 6mm 8mm 8mm 8mm

Miniature Flow Control Meter Out - Metric Tube to BSPT or BSPP Vendor Part No. No. Price 0450853 7665 04 10 $14.81 0451123 7665 06 10 17.94 0451109 7665 06 13 17.94 0451132 7665 06 17 21.00 0451325 7665 08 10 19.06 0451315 7665 08 13 19.50 0451336 7665 08 17 21.00 0442803 7660 04 19 16.56 0442804 7660 04 10 14.81 0442805 7660 06 19 17.94 0442806 7660 06 10 19.59 0442807 7660 06 13 21.24 0451221 7660 08 10 19.06 0451203 7660 08 13 19.50 0451239 7660 08 17 21.00

Thread 1/8 BSPT 1/8 BSPT 1/4 BSPT 3/8 BSPT 1/8 BSPT 1/4 BSPT 3/8 BSPT M5 1/8 BSPP M5 1/8 BSPP 1/4 BSPP 1/8 BSPP 1/4 BSPP 3/8 BSPP

Miniature Flow Control Meter In - Metric Tube to BSPT or M5 Vendor Part No. No. Price 0450854 7668 04 10 $14.81 0451124 7668 06 10 17.94 0451110 7668 06 13 17.94

Composite Ball Valves

19.06 19.50 21.00 14.06

0451048

7669 06 19

17.94

0450788 0450764 0451047 0451018 0451001 0451220 0451202 0451238

7010 04 19 7010 04 10 7010 06 19 7010 06 10 7010 06 13 7010 08 10 7010 08 13 7010 08 17

• Designed to be versatile • Full flow in both directions • Fine setting levels secured with use of built in locking nut • Maybe used individually or stacked together using two joining clips In-Line Flow Control (Push-to-Connect Ports) One–Way–Fractional or Metric

Composite Ball Valves Push-to-Connect ports, 3/2, with vent

Part No. 0401790 0401791 0401792 0401793

7668 08 10 7668 08 13 7668 08 17 7669 04 19

17.75 17.25 21.88 15.63 21.56 15.69 16.00 17.81

In-Line Flow Control (Push-to-Connect Ports)

Composite Ball Valves

Tube O.D. [5/32]" x 5/32" 1/4" x 1/4" 5/16" x 5/16" 3/8" x 3/8"

0451326 0451314 0451337 0450790

Knobless Compact Flow Control Meter Out - Metric Tube to BSPP or M5 Vendor Part No. No. Price

Vendor No. 7913 04 00 7913 56 00 7913 08 00 7913 60 00

UOM ^––– ––– ––– –––

More styles available including metric and Male NPT, please see your Fastenal representative for more details.

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Tube O.D. 5/32" 1/4" 5/16" 3/8" 1/2" 6mm 10mm 12mm

Part No. 442176 442177 0442793 0442789 0442790 0442792 0442794 0442795

Vendor No. 7770 04 00 7770 56 00 7770 08 00 7770 60 00 7770 62 00 7770 06 00 7770 10 00 7770 12 00

In-Line Flow Control

Price /Each $28.38 28.56 42.83 43.06 46.66 42.04 46.16 49.30

10-33 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Push to Connect Fittings

Miniature Flow Control Regulators

10_pHyd_1-42.qxd

3/11/07

2:33 PM

Page 34

PUSH-TO-CONNECT SWIFT-FIT INCH & METRIC FITTINGS Push-to-Connect Swift-Fit Inch & Metric Fittings Fittings Work With Inch & Metric Threads Push to Connect Fittings

Specifications Pressure Rating: 0-250 PSI vacuum Temperature Rating: 0° to 160°F Media: Compressed air and water Torque: Minimum 3.7 (ft. pounds) & Maximum 5.2 (ft. pounds) Tube Sizes: 1/8" - 1/2"; 3 MM to 14 MM Thread Sizes: 10-32 to 1/2"; M5 to 1/2"; Tubing Types: 90 Durometer; Nylon, Polyurethane, Polyethylene, and Copper

Features & Benefits • Fits both inch & metric threads (reduce inventory) • Exclusive buna thread seal (no thread tape required) • Nickel-plated brass body (corrosion resistant) • Lip type tube seal (superior tube sealing) • Low profile (will fit in confined spaces)

Push-to-Connect

Straight Male Connector

Tube O.D. 1/8" 1/8" 1/8" 5/32 5/32 5/32 1/4" 1/4" 1/4" 1/4" 5/16" 5/16" 5/16" 3/8" 1/2" 3/8" 3/8" 1/2" 1/2" 1/2"

Thread Size 10-32 1/8" 1/4" 10-32 1/8" 1/4" 10-32 1/8" 1/4" 3/8" 1/8" 1/4" 3/8" 1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2"

Straight Male Connector Model Price Part No. No. /Each 0400044 88020-02-32 $1.69 68440 87000-02-02 2.83 0443051 87000-02-04 1.93 0400045 88020-53-32 1.77 68441 87000-53-02 2.84 68442 87000-53-04 8.35 0400046 88020-04-32 1.94 68444 87000-04-02 2.99 68323 87000-04-04 3.58 68445 87000-04-06 4.41 68446 87000-05-02 4.59 68447 87000-05-04 4.85 0443057 87000-05-06 2.96 68448 87000-06-02 5.28 68449 87000-06-04 4.28 68450 87000-06-06 4.75 68451 87000-06-08 7.29 0443062 87000-08-04 3.63 68452 87000-08-06 7.11 68453 87000-08-08 8.41

Inch Fittings

Straight Male - Internal Hex

Female Connector

Swivel Male Elbow

Straight Male Internal Hex Female Connector Model Price Model Price Part No. No. /Each Part No. No. /Each 68510 87010-02-32 $3.85 68433 88030-02-02 5.13 0400123 88030-02-04 2.79 68511 87010-53-32 3.06 0443071 87010-53-02 2.04 68434 88030-53-02 5.90 0400124 88030-53-04 2.79 68512 87010-04-32 3.49 0443068 87010-04-02 2.65 68435 88030-04-02 4.98 0443069 87010-04-04 2.73 68436 88030-04-04 5.54

68437 68438

Swivel Male Elbow Model Price Part No. No. /Each 0400047 88115-02-32 $3.41 68466 87110-02-02 3.90 0443074 87110-02-04 3.46 0400048 88115-53-32 2.80 68467 87110-53-02 4.68 0443089 87110-53-04 3.83 0400049 88115-04-32 3.54 68468 87110-04-02 5.22 68469 87110-04-04 5.31 0443077 87110-04-06 4.31 0443078 87110-05-02 3.70 0443079 87110-05-04 4.06 0443080 87110-05-06 4.91 0443081 87110-06-02 4.94 88030-06-04 9.88 68470 87110-06-04 6.69 88030-06-06 8.95 68471 87110-06-06 7.20 0443084 87110-06-08 6.00 0443085 87110-08-04 4.72 68472 87110-08-06 7.75 68473 87110-08-08 9.72

Male Swivel Branch Tee

Male Swivel Run Tee

Swivel Male Branch Tee Model Price Part No. No. /Each 0400050 88215-02-32 $2.88 0443090 87210-02-02 4.15 0443091 87210-02-04 4.80

Swivel Male Run Tee Model Price Part No. No. /Each 0400053 88225-02-32 $4.50 0443102 87222-02-02 4.15 0443103 87222-02-04 4.70 0400054 88225-53-32 4.68 68477 87222-53-02 7.91 0443113 87222-53-04 7.35 0400055 88225-04-32 5.00 68478 87222-04-02 6.34 68479 87222-04-04 6.86

68484 0443101 0400052 68485 68486 0400040

87210-53-02 87210-53-04 88215-04-32 87210-04-02 87210-04-04 87210-04-06

9.17 7.96 3.10 6.68 7.03 3.65

0400041 68488 0443095 0443096 0443097 68489 68490

87210-06-02 87210-06-04 87210-06-06 87210-06-08 87210-08-04 87210-08-06 87210-08-08

4.59 9.28 5.71 9.60 9.61 14.52 16.13

0400043 68481 0443107 0443108 0443109 68482 68483

87222-06-02 87222-06-04 87222-06-06 87222-06-08 87222-08-04 87222-08-06 87222-08-08

4.77 11.19 8.19 9.60 9.67 12.11 13.55

Metric Push-To-Connect Fittings Tube O.D. 3mm 4mm 4mm 4mm 5mm 5mm 6mm 6mm 6mm 8mm 8mm 8mm 8mm 10mm 10mm 10mm 12mm 12mm 12mm

Thread Size M5 M5 1/8 1/4 1/8 1/4 M5 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 1/4 3/8 1/2

Straight Male Connector Model Part No. No. Price 0400067 50020N-3-M5 $1.89 0400068 50020N-4-M5 1.48 0441367 50000N-4-1/8 1.95 0441366 50000N-4-1/4 2.25 0441369 50000N-5-1/8 2.27 0441368 50000N-5-1/4 2.43 0400069 50020N-6-M5 1.55 0441371 50000N-6-1/8 2.27 0441370 50000N-6-1/4 2.43 0441373 50000N-8-1/8 2.44 0441372 50000N-8-1/4 2.56 0441374 50000N-8-3/8 2.88 0400064 50000N-8-1/2 2.21 0441362 50000N-10-1/4 3.29 0441363 50000N-10-3/8 3.35 0400065 50000N-10-1/2 2.66 0441364 50000N-12-1/4 3.93 0441365 50000N-12-3/8 4.16 0400066 50000N-12-1/2 3.15

Straight Male Connector (Internal Hex) Female Connector Model Model Part No. No. Price Part No. No. Price 0441375 50010N-3-M5 $2.88 0400070 50030M-3-M5 $2.63 0441377 50010N-4-M5 1.85 0441376 50010N-4-1/8 1.88 0441383 50030N-4-1/8 2.71

Swivel Male Elbow Model Part No. No. Price 0400071 50115N-3-M5 $3.31 0441421 50115N-4-M5 3.85 0441413 50110N-4-1/8 3.84 0441412 50110N-4-1/4 4.25 0441384 50030N-5-1/8 2.71 0441414 50110N-5-1/8 3.93

0441380 0441379 0441378 0441382 0441381

50010N-6-M5 50010N-6-1/8 50010N-6-1/4 50010N-8-1/8 50010N-8-1/4

10-34 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

2.07 2.07 2.33 2.43 2.50

0441386 0441385 0441388 0441387

50030N-6-1/8 50030N-6-1/4 50030N-8-1/8 50030N-8-1/4

2.71 3.13 3.13 3.38

0441422 0441416 0441415 0441419 0441418 0441420 0441417 0441406 0441407 0441405

50115N-6-M5 50110N-6-1/8 50110N-6-1/4 50110N-8-1/8 50110N-8-1/4 50110N-8-3/8 50110N-8-1/2 50110N-10-1/4 50110N-10-3/8 50110N-10-1/2

3.75 3.93 4.25 4.47 4.72 6.04 6.55 5.88 6.55 7.03

Swivel Male Branch Tee Model Part No. No. Price 0400074 50215M-3-M5 $3.69 0441445 50215N-4-M5 6.16 0441439 50210N-4-1/8 5.33 0441438 50210N-4-1/4 5.81 0441440 50210N-5-1/8 5.33

Swivel Male Run Tee Model Part No. No. Price 0400077 50225N-3-M5 $3.98 0441459 50225N-4-M5 6.32 0441453 50222N-4-1/8 5.33 0441452 50222N-4-1/4 5.81 0441454 50222N-5-1/8 5.33

0441446 0441442 0441441 0441444 0441443 0400072 0400073 0441432 0441433 0441431

0441460 0441456 0441455 0441458 0441457 0400075 0400076 0441448 0441449 0441447

50215N-6-M5 50210N-6-1/8 50210N-6-1/4 50210N-8-1/8 50210N-8-1/4 50210N-8-3/8 50210N-8-1/2 50210N-10-1/4 50210N-10-3/8 50210N-10-1/2

6.16 5.33 5.81 6.45 6.68 5.69 6.41 8.58 9.07 9.39

50225N-6-M5 50222N-6-1/8 50222N-6-1/4 50222N-8-1/8 50222N-8-1/4 50222N-8-3/8 50222N-8-1/2 50222N-10-1/4 50222N-10-3/8 50222N-10-1/2

6.32 5.33 5.81 6.45 6.68 4.97 5.60 8.58 9.07 9.39

0441409 50110N-12-3/8 7.35 0441435 50210N-12-3/8 9.78 0441451 50222N-12-3/8 9.78 0441408 50110N-12-1/2 8.05 0441434 50210N-12-1/2 10.69 0441450 50222N-12-/1/2 10.69

10_pHyd_1-42.qxd

3/11/07

2:33 PM

Page 35

PUSH-TO-CONNECT SWIFT-FIT INCH & METRIC FITTINGS Push to Connect Fittings

Push-to-Connect Swift-Fit Inch & Metric Fittings Cont.

Inch Tube Fittings

Tube O.D. 1/8" 5/32" 1/4" 5/16" 3/8" 1/2"

Tube Union Tube Union Model Part No. No. 68422 88040-02 68423 88040-53 68424 88040-04 68425 88040-05 68426 88040-06 68427 88040-08

Bulkhead Union Price /Each $4.15 4.82 5.02 5.16 7.86 8.56

Bulkhead Union Model Price Part No. No. /Each 68498 88050-02 $5.59 68499 88050-53 4.85 68500 88050-04 7.16 68501 88050-05 5.94 68502 88050-06 9.02 68503 88050-08 11.34

Union Tee

Union Elbow Union Elbow Model Part No. No. 0443126 88130-02 68428 88130-53 68429 88130-04 68430 88130-05 68431 88130-06 68432 88130-08

Price /Each $3.25 4.47 6.08 6.69 9.02 13.48

Union Tee Model Part No. No. 69585 88230-02 69365 88230-53 69366 88230-04 69367 88230-05 69368 88230-06 69369 88230-08

Plug Price /Each $7.06 6.04 6.04 6.47 9.30 12.00

Part No. 68504 68505 68506 68507 68508 68509

Union Y

Plug Model No. 88610-02 88610-53 88610-04 88610-05 88610-06 88610-08

Price /Each $1.54 1.35 1.35 2.77 2.27 3.05

Part No. 0443138 0443141 0443139 0443140 0400056

Union Y Model No. 88310-02 88310-53 88310-04 88310-05 88310-06

Price /Each $4.56 5.56 6.23 6.28 8.26

Metric Tube Fittings

Tube O.D. 3mm 4mm 5mm 6mm 8mm 10mm 12mm

Part No. 0441392 0441393 0441394 0441395 0441397 0441389 0441390

Tube Union Tube Union Model No. 50040N-3 50040N-4 50040N-5 50040N-6 50040N-8 50040N-10 50040N-12

Price $5.04 3.55 3.61 3.61 3.99 5.04 5.88

Bulkhead Union Bulkhead Union Model Part No. No. Price 0441401 0441402 0441403 0441404 0441399 0441400

50050N-4 50050N-5 50050N-6 50050N-8 50050N-10 50050N-12

Union Elbow Union Elbow Model Part No. No. 0441426 50130N-3 0441427 50130N-4 0441428 50130N-5 0441429 50130N-6 0441430 50130N-8 0441423 50130N-10 0441424 50130N-12

5.33 5.91 5.91 6.52 8.50 10.31

Price $5.04 3.93 3.94 3.99 4.64 5.72 7.47

Part No. 0441464 0441465 0441466 0441467 0441468 0441461 0441462

Union Tee Union Tee Model No. 50230N-3 50230N-4 50230N-5 50230N-6 50230N-8 50230N-10 50230N-12

Price $7.09 5.40 5.85 5.85 6.68 8.69 10.44

Part No. 0441469 0441470 0441471 0441472 0441473

Union Y Union Y Model No. 50310N-3 50310N-4 50310N-5 50310N-6 50310N-8

Price $9.45 7.60 7.92 7.41 9.01

Fixed Elbow

Fixed Elbow Tube O.D. 1/4 1/4 3/8 3/8

Thread Size 1/8 NPTF 1/4 NPTF 1/4 NPTF 3/8 NPTF

Part No. 68458 68459 68462 68463

Model No. 88100-04-02 88100-04-04 88100-06-04 88100-06-06

Price /Each $2.50 3.97 5.80 7.02

Reducer

Reducer

Tube O.D. 1/8 5/32 1/4 1/4 3/8

Stud 1/4 1/4 3/8 1/2 1/2

Part No. 68513 68515 68519 68521 68522

Model No. 88700-04-02 88700-04-53 88700-06-04 88700-08-04 88700-08-06

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price /Each $4.49 5.50 6.23 6.57 8.25

10-35 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_1-42.qxd

3/11/07

2:33 PM

Page 36

“SWIFT-FIT" INCH & INLINE FLOW CONTROLS, VALVES “Swift-Fit" Inch Flow Controls & Needle Valves

Inline Flow Controls & Needle Valves Inline Flow Controls & Needle Valves

Push to Connect Fittings

Specifications • Aluminum body • Brass stem panel mount standard

Inch Flow Controls & Needle Valves

Flow Controls

Features & Benefits • Fits both inch & metric threads • Nickel-plated brass body • Low profile construction • Captured stem to prevent blow-out Specifications

Thread Size 1/8 NPTF 1/4 NPTF 3/8 NPTF 1/2 NPTF

Operating Pressure: 0-150 PSI (non-shock) Media: Air, water, oil Controlled Flow: In, Out, Bi-directional (Both) Adjustments: Screw or knob

Tube O.D. 1/8 1/8 5/32 5/32 1/4 1/4 3/8 1/2 1/2

Thread Size 1/8 10-32 1/8 10-32 1/8 1/4 3/8 3/8 1/2

Flow Out Price Part No. /Each 0443155 $12.44 0443156 15.12 0443159 12.44 0443160 15.12 0443157 12.44 0443158 14.81 0443003 21.15 0443004 0443005

26.59 28.03

Operating Pressure: 0-150 PSI (non-shock) Media: Air, water, oil

Screw Adjustment Flow In

Part No. 0443171 0443172 0443175 0443176 0443173 0443174 0443006

Price /Each $12.86 16.21 12.86 16.21 13.05 14.42 21.15

Flows Both Price Part No. /Each 0443187 $11.11 0443188 13.27 0443191 11.76 0443192 13.33 0443189 11.11 0443190 12.71 0443009 21.15

0443007 0443008

26.59 28.02

0443010 0443011

26.59 28.03

Needle Valves Price /Each $9.52 12.60 24.42 27.91

Part No. 0443201 0443202 0443203 0443204

Price /Each $9.50 12.49 24.41

Part No. 0443205 0443206 0443207

Pneumatic Accessories Check Valve • Operating Pressure: 0-120 psi • Temperature Range: 0-160° F Check Valve

Slide Valve • Operating Pressure: 0-150 psi • Temperature Range: 0-160° F Quick Exhaust Valve • Operating Pressure: 0-150 psi • Temperature Range: 0-160° F

Quick Exhaust Valve Slide Valve

Knob Adjustment

Tube O.D. 1/8 1/8 5/32 5/32 1/4 1/4 3/8 1/2 1/2

Thread Size 1/8 10-32 1/8 10-32 1/8 1/4 3/8 3/8 1/2

Flow Out Price Part No. /Each 0443163 $13.22 0443164 16.76 0443167 13.22 0443168 16.76 0443165 14.15 0443166 16.21 0443012 20.84 0443013 21.99 0443014 28.58

Flow In Part No. 0443179 0443180 0443183 0443184 0443181 0443182 0443015 0443016 0443017

Flows Both Price /Each $12.35 13.61 12.35 13.36 12.35 13.78 21.58 21.99 27.59

Price /Each $13.67 17.37 14.15 17.37 13.67 16.21 21.58 21.99 28.58

Part No. 0443195 0443196 0443199 0443200 0443197 0443198 0443018 0443019 0443020

Thread Size 1/8 NPTF 1/4 NPTF 3/8 NPTF 1/2 NPTF 3/4 NPTF 1 NPTF

Check Valve Female NPTF Price Part No. /Each 0443037 $8.25 0443038 8.24

Slide Valve Female NPTF Price Part No. /Each 0443033 $13.43 0443034 16.38 0443035 20.38 0443036 25.81

Quick Exhaust Valve Female NPTF Price Part No. /Each 0443027 $10.51 0443028 12.90 0443029 15.20 0443030 21.75 0443031 24.66 0443032 142.14

Mini Ball Valves Mini Ball Valves • Chrome plated brass body & ball • High flow • Captured stem • Compact size Operating Pressure: Vacuum to 250 PSI Media: Air, oil, water

Screw Adjustment (female) Flow Out Thread Size 1/8" 1/4" 3/8

Part No. 0443153 0443154 0443021

Flows Both Price /Each $14.44 15.61 21.15

Price /Each $13.35 13.83 21.15

Part No. 0443185 0443186 0443023

Female x Female Thread Size 1/8 NPTF 1/4 NPTF 3/8 NPTF 1/2 NPTF

Knob Adjustment (female) Flow Out Thread Size 1/8 1/4 3/8

Part No. 0443161 0443162 0443024

Price /Each $13.88 13.88 21.25

Flow In Part No. 0443177 0443178 0443025

Flows Both Price /Each $13.35 13.83 21.25

10-36 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 0443193 0443194 0443026

Price /Each $13.33 13.88 23.89

Female x Female Price Part No. /Each 0443039 $6.24 0443040 6.40 0443041 6.95 0443042 9.73

Male x Female Male x Female Price Part No. /Each 0443043 $6.05 0443044 6.67 0443045 6.40 0443046 9.73

Tube x Tube Tube x Tube Price Part No. /Each 0443047 $10.73 0443048 10.45 0443049 11.66

10_pHyd_1-42.qxd

3/11/07

2:34 PM

Page 37

SWIFT FIT FITTING KITS Swift Fit Fittings Kits

Mixed Tube Size Kit

Part No. 0443212

1/4" Tube Kit Part #0443209

Part No. 0443209

Kit contains the following push-to-connects:

Description 1/4" Tube Kit

Price /Each $183.95

Kit contains the following push-to-connects: Tube O.D. 1/4" 1/4" 1/4 1/4" 1/4" 1/4 1/4" 1/4" 1/4" 1/4 1/4"

Thread Size 1/8" 1/4" 3/8 1/8" 1/4" 3/8 1/8 1/4

Part No. 68444 68323 68445 68468 68469 0443077 68485 68486 68424 68429 69366

Description Straight Male Connector Straight Male Connector Straight Male Connector Swivel Male Elbow Swivel Male Elbow Swivel Male Elbow Swivel Male Branch Tee Swivel Male Branch Tee Tube Union Union Elbow Union Tee

Pkg. Qty. 5 10 3 5 10 3 3 6 2 6 2

3/8" Tube Kit

Description 3/8" Tube Kit

Price /Each $220.89

Part No. 0441480

Thread Size 1/4" 3/8" 1/2 1/4" 3/8" 1/2 1/4 3/8 1/2

Part No. 68449 68450 68451 68470 68471 0443084 68488 0443095 0443096 68426 68431 69368

Description Straight Male Connector Straight Male Connector Straight Male Connector Swivel Male Elbow Swivel Male Elbow Swivel Male Elbow Swivel Male Branch Tee Swivel Male Branch Tee Swivel Male Branch Tee Tube Union Union Elbow Union Tee

Pkg. Qty. 3 6 5 3 6 5 2 2 2 2 3 2

1/2 1/2 1/2

Description Straight Male Connector Swivel Male Elbow Swivel Male Branch Tee Tube Union Union Elbow Union Tee Straight Male Connector Swivel Male Elbow Swivel Male Branch Tee Tube Union Union Elbow Union Tee Straight Male Connector Swivel Male Elbow Swivel Male Branch Tee Tube Union Union Elbow Union Tee

Pkg. Qty. 10 10 6 2 6 2 6 6 2 2 3 2 6 6 2 2 3 2

Price /Each $386.79

Description 6mm Tube Fitting Kit

Tube O.D. 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm

Thread Size M5 1/8 1/4 1/8 1/4 M5 1/8 1/4

Part No. 0441380 0441371 0441370 0441416 0441415 0441422 0441442 0441441 0441429 0441395 0441467

Description Straight Male Connector (Internal Hex) Straight Male Connector Straight Male Connector Swivel Male Elbow Swivel Male Elbow Swivel Male Elbow Swivel Male Branch Tee Swivel Male Branch Tee Union Elbow Tube Union Union Tee

Pkg. Qty. 5 5 10 5 10 5 5 10 5 5 5

8MM Tube Kit

Part #0443211

Part # 0441481

Description 1/2" Tube Kit

Price /Each $261.15

Part No. 0441481

Kit contains the following push-to-connects: Tube O.D. 1/2 1/2" 1/2 1/2 1/2" 1/2 1/2 1/2 1/2 1/2 1/2 1/2

3/8" 3/8" 3/8

Part No. 68323 68469 68486 68424 68429 69366 68450 68471 0443095 68426 68431 69368 68453 68473 68490 68427 68432 69369

Kit contains the following push-to-connects:

1/2" Tube Kit

Part No. 0443211

Thread Size 1/4" 1/4" 1/4

Part # 0441480

Kit contains the following push-to-connects: Tube O.D. 1/2" 3/8" 3/8 3/8" 3/8" 3/8 3/8" 3/8" 3/8 3/8" 3/8 3/8"

Tube O.D. 1/4" 1/4" 1/4" 1/4" 1/4 1/4" 3/8" 3/8" 3/8" 3/8" 3/8 3/8" 1/2 1/2 1/2 1/2 1/2 1/2

6MM Tube Kit

Part #0443210

Part No. 0443210

Price /Each $411.50

Description Mixed Tube Size Kit

Thread Size 1/4 3/8" 1/2 1/4 3/8" 1/2 1/4 3/8 1/2

Part No. 0443062 68452 68453 0443085 68472 68473 0443097 68489 68490 68427 68432 69369

Description 8mm Tube Fitting Kit

Price /Each $370.02

Kit contains the following push-to-connects: Description Straight Male Connector Straight Male Connector Straight Male Connector Swivel Male Elbow Swivel Male Elbow Swivel Male Elbow Swivel Male Branch Tee Swivel Male Branch Tee Swivel Male Branch Tee Tube Union Union Elbow Union Tee

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Pkg. Qty. 3 5 6 3 5 6 2 2 2 2 3 2

Tube O.D. 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm

Thread Size 1/8 1/4 3/8 1/4 3/8 1/2 1/8 1/4

Part No. 0441373 0441372 0441374 0441418 0441420 0441417 0441444 0441443 0441430 0441397 0441468

Description Straight Male Connector Straight Male Connector Straight Male Connector Swivel Male Elbow Swivel Male Elbow Swivel Male Elbow Swivel Male Branch Tee Swivel Male Branch Tee Union Elbow Tube Union Union Tee

Pkg. Qty. 5 10 10 10 5 5 3 3 3 3 3

10-37 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Push to Connect Fittings

Part #0443212

10_pHyd_1-42.qxd

3/11/07

2:34 PM

Page 38

BRASS PUSH-TO-CONNECT (POLY-PUSH) FITTINGS Stem Adapter

Brass Push-To-Connect (Poly-Push) Fittings Thermoplastic Tubing

These fittings are nickel-plated Brass; Silver in color. Push-To-Connect fittings are used with thermoplastic tubing only.

Cartridge

Tube O.D. 1/8 5/32 1/4 5/16 3/8 1/2

Vendor No. 1161X2 1161X2.5 1161X4 1161X5 1161X6 1161X8

Part No. 440954-131280 440955-131280 440956-131280 440957-131280 440958-131280 440959-131280

Price /Each $3.48 4.17 3.54 4.64 4.40 5.13

Tube O.D. 1/8 1/8 5/32 5/32 1/4 1/4 5/16 5/16 3/8 3/8 1/2 1/2

MPT 1/8 1/4 1/8 1/4 1/8 1/4 1/8 1/4 1/4 3/8 3/8 1/2

Knurled Male Connector

Vendor No. 1180X2 1180X2X4 1180X2.5 1180X2.5X4 1180X4 1180X4X4 1180X5 1180X5X4 1180X6 1180X6X6 1180X8 1180X8X8

Part No. 440983-131280 440984-131280 440985-131280 440986-131280 440987-131280 440988-131280 440989-131280 440990-131280 440991-131280 440992-131280 440993-131280 440994-131280

Price /Each $2.40 2.38 3.10 3.60 3.32 2.38 2.66 3.25 4.02 3.47 3.17 5.57

Bulkhead Union Plug (Plastic)

Tube O.D. 1/8 5/32 1/4 5/16 3/8 1/2

Vendor No. 1129X2 1129X2.5 1129X4 1129X5 1129X6 1129X8

Part No. 440960-131280 440961-131280 440962-131280 440963-131280 440964-131280 440965-131280

Price /Each $1.92 1.58 1.65 1.90 1.98 3.38

Union (For Joining Tubing)

Tube O.D. 1/8 5/32 1/4 5/16 3/8 1/2

Vendor No. 1174X2 1174X2.5 1174X4 1174X5 1174X6 1174X8

Part No. 440995-131280 440996-131280 440997-131280 440998-131280 440999-131280 441000-131280

Price /Each $5.13 4.89 5.72 6.47 9.09 13.90

Part No. 441001-131280 441002-131280 441003-131280

Price /Each $12.54 11.19 17.97

Union “Y"

Tube O.D. 1/8 5/32 1/4

MPT 10-32 10-32 10-32

Part No. 68510 68511 68512

Price /Each $3.85 3.06 3.49

Part No. 441016-131280 441017-131280 441018-131280 441019-131280 441020-131280 441021-131280 441022-131280 441023-131280 441024-131280 441025-131280 441026-131280 441027-131280 441028-131280 441029-131280 441030-131280 441031-131280 441032-131280 441033-131280 441034-131280

Price /Each $3.34 2.83 2.45 4.00 4.12 3.99 4.38 3.00 3.22 3.55 4.49 4.72 5.23 6.05 6.64 5.41 7.25 8.82 9.82

Male Connector

Tube O.D. 1/8 1/8 1/8 5/32 5/32 5/32 1/4 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2

MPT 10-32 1/8 1/4 10-32 1/8 1/4 10-32 1/8 1/4 3/8 1/8 1/4 3/8 1/8 1/4 3/8 1/2 3/8 1/2

Vendor No. 1168X2A 1168X2 1168X2X4 1168X2.5A 1168X2.5 1168X2.5X4 1168X4A 1168X4 1168X4X4 1168X4X6 1168X5 1168X5X4 1168X5X6 1168X6X2 1168X6 1168X6X6 1168X6X8 1168X8 1168X8X8

90° Union Elbow Tube O.D. 1/8 5/32 1/4 5/16 3/8 1/2

Vendor No. 1162X2 1162X2.5 1162X4 1162X5 1162X6 1162X8

Part No. 440966-131280 440967-131280 440968-131280 440969-131280 440970-131280 440971-131280

Price /Each $4.28 4.05 4.81 5.40 6.66 9.31

Tube O.D. 1/8 5/32 1/4

Vendor No. 1107X2 1107X2.5 1107X4

Male Swivel “Y"

Double Union (For Joining Push-To-Connect Fittings)

Tube O.D. 1/8 5/32 1/4 5/16 3/8 1/2

Vendor No. 1105X2 1105X2.5 1105X4 1105X5 1105X6 1105X8

Part No. 440972-131280 440973-131280 440974-131280 440975-131280 440976-131280 440977-131280

Price /Each $1.55 5.12 1.97 1.94 3.32 4.52

Tube O.D. 1/8 1/8 5/32 1/4

MPT 10-32 1/8 1/8 1/8

Vendor No. 1108X2A 1108X2 1108X2.5 1108X4

Part No. 441004-131280 441005-131280 441006-131280 441007-131280

Price /Each $11.90 9.37 12.66 10.41

Price /Each $5.02 4.18 5.35 4.93 6.01

10-38 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 441035-131280 441036-131280 441037-131280 441038-131280 441039-131280 441040-131280

Price /Each $4.77 5.11 5.39 7.78 8.14 9.45

90° Male Elbow (No Swivel)

Fixed Elbow

Reducer

Part No. 440978-131280 440979-131280 440980-131280 440981-131280 440982-131280

Vendor No. 1165X2 1165X2.5 1165X4 1165X5 1165X6 1165X8

Female Connector

Female Connector

Vendor Tube O.D. No. 1/8 x1/4 1109X2X4 5/32 x1/4 1109X2.5X4 1/4 x3/8 1109X4X6 1/4 x1/2 1109X4X8 3/8 x1/2 1109X6X8

Tube O.D. 1/8 5/32 1/4 5/16 3/8 1/2

Tube O.D. 1/8 1/8 5/32 5/32 1/4 1/4 3/8 3/8

FPT 1/8 1/4 1/8 1/4 1/8 1/4 1/4 3/8

Vendor No. 1166X2 1166X2X4 1166X2.5 1166X2.5X4 1166X4 1166X4X4 1166X6 1166X6X6

Part No. 441008-131280 441009-131280 441010-131280 441011-131280 441012-131280 441013-131280 441014-131280 441015-131280

Price /Each $5.88 8.02 6.76 9.00 6.26 6.72 8.58 6.16

Tube O.D. 1/4 1/4 3/8 3/8

MPT 1/8 1/4 1/4 3/8

Vendor No. 1169X4 1169X4X4 1169X6 1169X6X6

Part No. 441041-131280 441042-131280 441043-131280 441044-131280

Price /Each $4.31 4.61 6.95 7.32

10_pHyd_1-42.qxd

3/11/07

2:34 PM

Page 39

BRASS INCH AND METRIC PUSH-TO-CONNECT, FLOW CONTROLS Brass Push-To-Connect (Poly-Push) Fittings Cont.

Male Branch Tee (Swivel)

90° Male Elbow (Swivel)

Vendor Tube O.D. MPT No. Part No. 1/8 10-32 1172X2AS 441083-131280 1/8 1/8 1172X2S 441084-131280 5/32 10-32 1172X2.5AS 441085-131280 5/32 1/8 1172X2.5S 441086-131280 5/32 1/4 1172X2.5X4S 441087-131280 1/4 1/8 1172X4S 441088-131280 1/4 1/4 1172X4X4S 441089-131280 1/4 3/8 1172X4X6S 441090-131280 3/8 1/4 1172X6S 441091-131280 3/8 3/8 1172X6X6S 441092-131280 3/8 1/2 1172X6X8S 441093-131280 1/2 1/4 1172X8X4S 441094-131280 1/2 3/8 1172X8S 441095-131280 1/2 1/2 1172X8X8S 441096-131280

Price /Each $8.92 5.13 5.12 7.73 4.67 5.49 4.95 5.74 8.55 6.14 6.45 8.62 8.18 8.55 9.63 11.61 10.09 13.14

Price /Each $8.98 6.94 8.83 8.65 7.35 8.16 8.33 11.44 11.38 15.38 14.98 17.49 14.98 17.77

Push-To-Connect: Flow Controls

Tube O.D. 1/4 3/8

FPT 1/8 1/4

Price /Each $6.00 8.49

Union Tee

Tube O.D. 1/8 5/32 1/4 5/16 3/8 1/2

Vendor No. 1164X2 1164X2.5 1164X4 1164X5 1164X6 1164X8

Part No. 441063-131280 441064-131280 441065-131280 441066-131280 441067-131280 441068-131280

Price /Each $5.88 8.15 6.43 6.18 10.56 13.23

Vendor Tube O.D. NPTF No. 5/32 1/8 A55SCU x 2.5 x 2 1/4 1/8 A55SCU x 4 x 2 1/4 1/4 A55SCU x 4 x 4 3/8 1/4 A55SCU x 6 x 4 3/8 3/8 A55SCU x 6 x 6

Price Part No. /Each 441314-131280 $31.63 441315-131280 25.16 441316-131280 26.37 441317-131280 26.57 441318-131280 43.70

SCU (Banjo-Female)

Price /Each $8.98 6.90 9.00 8.25 8.65 7.18 7.41 10.04 11.65 13.69 18.99 16.92 16.44 22.49

Part No. 441126-131280 441127-131280 441128-131280 441129-131280 441130-131280 441131-131280

Price /Each $1.78 1.92 1.56 1.92 2.40 3.04

Double Union Tube O.D. (mm) 4 6 8 10

Vendor No. 1105X4M 1105X6M 1105X8M 1105X10M

Part No. 441132-131280 441134-131280 441135-131280 441136-131280

Price /Each $1.70 2.01 2.97 4.25

Tube O.D. (Am x Bm) 4x6 6x8 6 x 10 8 x 10 8 x 12

Vendor No. 1109X4MX6M 1109X6MX8M 1109X6MX10M 1109X8MX10M 1109X8MX12M

Part No. 441139-131280 441143-131280 441144-131280 441146-131280 441147-131280

Price /Each $3.17 4.08 5.01 5.46 6.56

Union Tube O.D. (mm) 4 5 6 8 10 12

Vendor No. 1162X4M 1162X5M 1162X6M 1162X8M 1162X10M 1162X12M

Part No. 441149-131280 441150-131280 441151-131280 441152-131280 441153-131280 441154-131280

Price /Each $9.08 6.23 5.76 6.64 8.43 8.59

Part No. 441164-131280 441165-131280 441166-131280 441167-131280 441168-131280 441169-131280

Price /Each $7.03 13.64 10.14 10.69 11.95 16.91

Part No. 441170-131280 441171-131280 441172-131280 441173-131280

Price /Each $13.34 8.40 11.03 20.15

Bulkhead Union

Male Run Tee (Swivel)

Vendor Tube O.D. MPT No. Part No. 1/8 10-32 1171X2AS 441069-131280 1/8 1/8 1171X2S 441070-131280 5/32 10-32 1171X2.5AS 441071-131280 5/32 1/8 1171X2.5S 441072-131280 5/32 1/4 1171X2.5X4S 441073-131280 1/4 1/8 1171X4S 441074-131280 1/4 1/4 1171X4X4S 441075-131280 1/4 3/8 1171X4X6S 441076-131280 3/8 1/4 1171X6S 441077-131280 3/8 3/8 1171X6X6S 441078-131280 3/8 1/2 1171X6X8S 441079-131280 1/2 1/4 1171X8X4S 441080-131280 1/2 3/8 1171X8S 441081-131280 1/2 1/2 1171X8X8S 441082-131280

Vendor No. 1129X4MRP 1129X5MRP 1129X6MRP 1129X8MRP 1129X10MRP 1129X12MRP

Reducer

Flow controls come unidirectional or bidirectional. Small size allows for direct mounting on valves or cylinders.

Part No. 68475 68476

Tube O.D. (mm) 4 5 6 8 10 12

Joins Push Connect Fittings

SCU (Tube) 90° Female Elbow

Plug (Plastic)

Female Vendor Price Thread NPTF No. Part No. /Each 1/8 Banjo 1/8 A557SCU x 2 x 2 441320-131280 $32.59 1/4 Banjo 1/4 A557SCU x 4 x 4 441321-131280 34.49 3/8 Banjo 3/8 A557SCU x 6 x 6 441322-131280 47.05

MCU (Banjo-Female)

Tube O.D. (mm) 4 5 6 8 10 12

Vendor No. 1174X4M 1174X5M 1174X6M 1174X8M 1174X10M 1174X12M

Union “Y"

Vendor Price Tube O.D. NPTF No. Part No. /Each 1/8 1/8 A557MCU x 2 x 2 441323-131280 $32.98 3/8 3/8 A557MCU x 6 x 6 441324-131280 54.26

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Tube O.D. (mm) 4 5 6 8

Vendor No. 1107X4M 1107X5M 1107X6M 1107X8M

10-39 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Push to Connect Fittings

Vendor Tube O.D. MPT No. Part No. 1/8 10-32 1169X2AS 441045-131280 1/8 1/8 1169X2S 441046-131280 1/8 1/4 1169X2X4S 441047-131280 5/32 10-32 1169X2.5AS 441048-131280 5/32 1/8 1169X2.5S 441049-131280 5/32 1/4 1169X2.5X4S 441050-131280 1/4 1/8 1169X4S 441051-131280 1/4 1/4 1169X4X4S 441052-131280 1/4 3/8 1169X4X6S 441053-131280 5/16 1/8 1169X5S 441054-131280 5/16 1/4 1169X5X4S 441055-131280 5/16 3/8 1169X5X6S 441056-131280 3/8 1/4 1169X6S 441057-131280 3/8 3/8 1169X6X6S 441058-131280 3/8 1/2 1169X6X8S 441059-131280 1/2 1/4 1169X8X4S 441060-131280 1/2 3/8 1169X8S 441061-131280 1/2 1/2 1169X8X8S 441062-131280

Brass Metric Push-To-Connect

10_pHyd_1-42.qxd

3/11/07

2:34 PM

Page 40

BRASS METRIC PUSH-TO-CONNECT, POLYURETHANE TUBING Brass Metric Push-To-Connect

90° Male Elbow Swivel Universal (BSPT)

Thermoplastic Tubing

Male Connector (BSPT) Tube O.D. 4mm 4mm 5mm 5mm 6mm 6mm 8mm 8mm 8mm 10mm 10mm 10mm 12mm 12mm 12mm

Thread 1/8 BSPT 1/4 BSPT 1/8 BSPT 1/4 BSPT 1/8 BSPT 1/4 BSPT 1/8 BSPT 1/4 BSPT 3/8 BSPT 1/4 BSPT 3/8 BSPT 1/2 BSPT 1/4 BSPT 3/8 BSPT 1/2 BSPT

Vendor No. 1168X4MX2PT 1168X4MX4PT 1168X5MX2PT 1168X5MX4PT 1168X6MX2PT 1168X6MX4PT 1168X8MX2PT 1168X8MX4PT 1168X8MX6PT 1168X10MX2PT 1168X10MX4PT 1168X10MX6PT 1168X12MX4PT 1168X12MX6PT 1168X12MX8PT

Part No. 441176-131280 441177-131280 441178-131280 441179-131280 441180-131280 441181-131280 441182-131280 441183-131280 441184-131280 441185-131280 441186-131280 441187-131280 441188-131280 441189-131280 441190-131280

Price /Each $3.01 3.01 3.02 3.00 3.22 3.60 3.69 3.78 4.34 8.12 6.53 6.19 6.64 5.52 7.10

Female Connector (BSPP)

Tube O.D. 4mm 6mm 6mm 8mm 8mm 10mm

Thread 1/8 BSPP 1/8 BSPP 1/4 BSPP 1/8 BSPP 1/4 BSPP 1/4 BSPP

Vendor No. 1166X4MX2PP 1166X6MX2PP 1166X6MX4PP 1166X8MX2PP 1166X8MX4PP 1166X10MX4PP

Tube O.D. 4mm 5mm 5mm 6mm 6mm 8mm 8mm 8mm 10mm 10mm 10mm 12mm 12mm 12mm

Vendor No. 1169X4MX2PTS 1169X5MX2PTS 1169X5MX4PTS 1169X6MX2PTS 1169X6MX4PTS 1169X8MX2PTS 1169X8MX4PTS 1169X8MX6PTS 169X10MX4PTS 169X10MX6PTS 169X10MX8PTS 169X12MX4PTS 169X12MX6PTS 169X12MX8PTS

Thread 1/8 BSPT 1/8 BSPT 1/4 BSPT 1/8 BSPT 1/4 BSPT 1/8 BSPT 1/4 BSPT 3/8 BSPT 1/4 BSPT 3/8 BSPT 1/2 BSPT 1/4 BSPT 3/8 BSPT 1/2 BSPT

Part No. 441225-131280 441226-131280 441227-131280 441228-131280 441229-131280 441230-131280 441231-131280 441232-131280 441233-131280 441234-131280 441235-131280 441236-131280 441237-131280 441238-131280

Swivel for installation purposes only.

Thermoplastic Tubing

Part No. 441197-131280 441201-131280 441202-131280 441203-131280 441204-131280 441205-131280

Price /Each $5.95 4.13 5.05 6.78 5.34 9.56

Polyurethane Tubing (Fractional) • The most flexible thermoplastic tubing available • Great abrasion and kink resistance • 98A durometer • Perfect for push-to-connect fittings • High degree of dimensional stability • Ether based material provides excellent resistance to moisture, oil, and cold

90° Union Elbow

Tube O.D. (mm) 4 5 6 8 10 12

Vendor No. 1165X4M 1165X5M 1165X6M 1165X8M 1165X10M 1165X12M

Part No. 441206-131280 441207-131280 441208-131280 441209-131280 441210-131280 441211-131280

Price /Each $5.30 8.54 6.33 7.57 9.35 13.18

90° Male Elbow (BSPT)

Tube O.D. 4mm 4mm 5mm 5mm 6mm 6mm 8mm 8mm 8mm 10mm 10mm 12mm 12mm

Thread 1/8 BSPT 1/4 BSPT 1/8 BSPT 1/4 BSPT 1/8 BSPT 1/4 BSPT 1/8 BSPT 1/4 BSPT 3/8 BSPT 1/4 BSPT 3/8 BSPT 1/4 BSPT 3/8 BSPT

Vendor No. 1169X4MX2PT 1169X4MX4PT 1169X5MX2PT 1169X5MX4PT 1169X6MX2PT 1169X6MX4PT 1169X8MX2PT 1169X8MX4PT 1169X8MX6PT 1169X10MX4PT 1169X10MX6PT 1169X12MX4PT 1169X12MX6PT

Price /Each $7.56 6.06 7.62 8.74 6.65 10.12 9.77 10.13 12.40 13.10 11.18 14.54 16.10 13.77

Part No. 441212-131280 441213-131280 441214-131280 441215-131280 441216-131280 441217-131280 441218-131280 441219-131280 441220-131280 441221-131280 441222-131280 441223-131280 441224-131280

10-40 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Each $5.20 8.63 7.62 10.20 4.26 4.45 5.05 6.15 10.97 8.99 7.80 12.50 11.46

Part No. 0448260 0448261 0448264 0448263 0448740 0448345 0448346 0448349 0448336 0448330 0448352 0448333 0448347 0448350 0448829 0448209 0448226 0448229 0448712 0448228 0448231 0448227 0448230

Vendor No. PU18AC PU18ABK PU18ANB PU18AR PU18CC PU532AC PU532ABK PU532ANB PU532ACB PU532AR PU532ACR PU532AOR PU532AG PU532AY PU532CBK PU14AC PU14ABK PU14ANB PU14ACB PU14AR PU14ACR PU14AG PU14AY

ID .062 .062 .062 .062 .062 .093 .093 .093 .093 .093 .093 .093 .093 .093 .093 .156 .156 .156 .156 .156 .156 .156 .156

OD 1/8" 1/8" 1/8" 1/8" 1/8" 5/32 5/32 5/32 5/32 5/32 5/32 5/32 5/32 5/32 5/32 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

Coil Length 100 100 100 100 500 100 100 100 100 100 100 100 100 100 500 100 100 100 100 100 100 100 100

Color Clear Black Navy Blue Red Clear Clear Black Navy Blue Translucent Blue Red Translucent Red Orange Green Yellow Black Clear Black Navy Blue Translucent Blue Red Translucent red Green Yellow

Price /Roll $21.38 21.38 21.38 21.38 98.94 23.89 23.89 23.89 23.89 23.89 23.89 23.89 23.89 23.89 107.50 42.76 42.76 42.76 42.76 42.76 42.76 42.76 42.76

10_pHyd_1-42.qxd

3/11/07

2:34 PM

Page 41

THERMOPLASTIC TUBING • The most flexible thermoplastic tubing available • Great abrasion and kink resistance • 98A durometer • Perfect for push-to-connect fittings • High degree of dimensional stability • Ether based material provides excellent resistance to moisture, oil, and cold

Polyurethane Tubing (Fractional) Cont. Part No. 0448310 0448311 0448314 0448313 0448312 0448282 0448283 0448285 0448289 0448284 0448288 0447815 0448286 0448764 0448765 0448769 0448185 0448186 0448189

Vendor No. PU516AC PU516ABK PU516ANB PU516AR PU516AG PU38AC PU38ABK PU38ANB PU38ACB PU38AR PU38ACR PU38AG PU38AY PU38CC PU38CBK PU38CY PU12AC PU12ABK PU12ANB

ID .187 .187 .187 .187 .187 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .328 .328 .328

OD 5/16 5/16 5/16 5/16 5/16 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2

Coil Length 100 100 100 100 100 100 100 100 100 100 100 100 100 500 500 500 100 100 100

Color Clear Black Navy Blue Red Green Clear Black Navy Blue Translucent Blue Red Translucent red Green yellow Clear Black yellow Clear Black Navy Blue

Price /Roll $67.75 67.75 67.75 67.75 67.75 87.35 87.35 87.35 87.35 87.35 87.35 87.35 87.35 394.50 394.50 394.50 167.50 167.50 167.50

0448188 0448192 0448190

PU12AR PU12ACR PU12AY

.328 .328 .328

1/2 1/2 1/2

100 100 100

Red translucent red yellow

167.50 167.50 167.50

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Part No. 0448510 0448504 0448505 0448507 0448506 0448508 0448395 0448550 0448544 0448549 0448547 0448546 0448545 0448548 0445820 0445823 0448567 0448561 0448566 0448564 0448563

Vendor No. PU04MEC PU04MEBK PU04MEGY PU04MENB PU04MER PU04MEY PU04MFBK PU06MEC PU06MEBK PU06MEGY PU06MENB PU06MER PU06MEG PU06MEY PU06MFBK PU06MFNB PU08MEC PU08MEBK PU08MEGY PU08MENB PU08MER

OD 4mm 4mm 4mm 4mm 4mm 4mm 4mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 8mm 8mm 8mm 8mm 8mm

ID 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 5mm 5mm 5mm 5mm 5mm

Coil Length 25m 25m 25m 25m 25m 25m 100m 25m 25m 25m 25m 25m 25m 25m 100m 100m 25m 25m 25m 25m 25m

Color Clear Black Grey Navy Blue Red Yellow Black Clear Black Grey Navy Blue Red Green Yellow Black Navy Blue Clear Black Grey Navy Blue Red

Price/Roll $23.38 23.38 23.38 23.38 23.38 23.38 81.85 30.73 30.73 30.73 30.73 30.73 30.73 30.73 107.55 107.56 54.65 54.65 54.65 54.65 54.65

0448562 0448565 0448412 0448415 0448467 0448462 0448464 0448465 0448484 0448479 0448481 0445827

PU08MEG PU08MEY PU08MFBK PU08MFNB PU10MEC PU10MEBK PU10MENB PU10MEY PU12MEC PU12MEBK PU12MENB PU12MFNB

8mm 8mm 8mm 8mm 10mm 10mm 10mm 10mm 12mm 12mm 12mm 12mm

5mm 5mm 5mm 5mm 6.5mm 6.5mm 6.5mm 6.5mm 8mm 8mm 8mm 8mm

25m 25m 100m 100m 25m 25m 25m 25m 25m 25m 25m 100m

Green Yellow Black Navy Blue Clear Black Navy Blue Yellow Clear Black Navy Blue Navy Blue

54.65 54.65 191.27 191.27 75.30 75.30 75.30 75.30 119.85 119.85 119.85 419.38

10-41 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Thermoplastic Tubing

Polyurethane Tubing (Metric)

Thermoplastic Tubing Cont.

10_pHyd_1-42.qxd

3/11/07

2:35 PM

Page 42

POLYURETHANE AND PVC TUBING Thermoplastic Tubing Cont. Thermoplastic Tubing

PT240 Polyethylene • Typical Application: Economical, flexible, low density polyethylene has a wide range of uses in industrial and agricultural applications. • Temperature Range: -40°F to +135°F (-40°C to +57°C) • Available Colors: Natural off-white, black, yellow, orange, blue, red, and green. FDA colors available on request. Refer to current price list for availability of colors. • Contains: Ultra-Violet stabilizer in black tubing. • Note: * IS BULK. COLOR GUIDE: NA = Natural, BK = Black, YW = Yellow, OR = Orange, BU = Blue, RD = Red, GN=Green, GY = Gray

Specifications Part No. Tube O.D. Tube Wall PT24004 1/4 (.250) .062 PT24044 1/4 (.250) .040 PT24005 5/16 (.312) .062 PT24006 3/8 (.375) .062 PT24008 1/2 (.500) .062 PT24010 5/8 (.625) .062 PT24012 3/4 (.750) .094 PT24016 1 (1.000) .125

Max. Work Min. Burst Min. Bend Pressure Pressure Radius Lbs./100 PSI 70ºF PSI 70ºF 70°F ft. 200 600 .75” 1.5 133 400 .62” 1.0 135 480 1.0” 1.9 135 400 1.5” 2.4 100 300 2.0” 3.4 80 240 2.5” 4.4 70 210 3.0” 7.6 100 300 5.0” 13.4

Coil Lgth. 100,*1000 100,*1000 100,*1000 100,*1000 100,500 100 100 100

Natural compound covered under FDA 21CFR177.1520 regulations for food contact.

Part No. 0450117 0450118 450007-131280 0450120 0450121 0450122 0450123 0450124 0450125

Color RD GN NA BK YW OR BU RD GN

Part No. 450000-131280 0450071 0450072 0450073 0450074 0450075 0450076 450001-131280 0450078 0450079 0450080 0450081 0450082 0450083

Color NA BK YW OR BU RD GN NA BK YW OR BU RD GN

Part No. 450008-131280 0450129 0450130 0450131 450009-131280 0450134 0450136 0450137 0450138

Part No. 450002-131280 0450085 0450086 0450087 0450088 0450090 450003-131280 0450092 0450095

Color NA BK YW OR BU GN NA BK BU

Color NA OR BU RD NA BK OR BU RD

Color NA YW BU NA BK GN

Coil Lgth. 100 100 100 100 100 100 100 *1000 *1000 *1000 *1000 *1000 *1000 *1000

Price /Roll $42.25 42.25 42.25 42.25 42.25 42.25 42.25 184.50 184.50 184.50 184.50 184.50 184.50 184.50

Coil Lgth. 100 100 100 100 100 100 *1000 *1000 *1000

Price /Roll $41.50 41.50 41.50 41.50 41.50 41.50 175.20 175.20 175.20

Vendor No. PT24005 PT24005 PT24005 PT24005 PT24005 PT24005

Coil Lgth. 100 100 100 *1000 *1000 *1000

Price /Roll $47.35 47.35 47.35 195.50 195.50 195.50

Vendor No. PT24006 PT24006 PT24006 PT24006 PT24006

Coil Lgth. 100 100 100 100 100

Price /Roll $49.50 49.50 49.50 49.50 49.50

Tube O.D. - 3/8 (.062 Wall) Part No. 450006-131280 0450113 0450114 0450115 0450116

Color NA BK YW OR BU

10-42 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Vendor No. PT24008 PT24008 PT24008 PT24008 PT24008 PT24008 PT24008 PT24008 PT24008

Coil Lgth. 100 100 100 100 *500 *500 *500 *500 *500

Price /Roll $62.50 62.50 62.50 62.50 177.50 177.50 177.50 177.50 177.50

Part No. 450010-131280

Color NA

Vendor No. PT24010

Coil Lgth. 100

Price /Roll $66.25

Vendor No. PT24012

Coil Lgth. 100

Price /Roll $82.50

Vendor No. PT24016

Coil Lgth. 100

Price /Roll $283.00

Tube O.D. - 3/4 (.04 Wall)

Tube O.D. - 5/16 (.062 Wall) Part No. 450004-131280 0450100 0450102 450005-131280 0450106 0450111

Price /Roll $49.50 49.50 245.80 245.80 245.80 245.80 245.80 245.80 245.80

Tube O.D. - 5/8 (.062 Wall)

Part No. 450011-131280

Color NA

Tube O.D. - 1 (.125 Wall) Part No. 450012-131280

Color NA

PT200 Polyvinyl Chloride “PVC” • Typical Application: Soft pliable, plasticized PVC Resin Tubing, for practically any low pressure laboratory, industrial, agricultural or domestic application. • Temperature Range: -5°F to +105°F (-20°C to +41°C) • Available Colors: Clear (NA) Specifications

Tube O.D. - 1/4 (.040 Wall) Vendor No. PT24044 PT24044 PT24044 PT24044 PT24044 PT24044 PT24044 PT24044 PT24044

Coil Lgth. 100 100 *1000 *1000 *1000 *1000 *1000 *1000 *1000

Tube O.D. - 1/2 (.062 Wall)

Tube O.D. - 1/4 (.062 Wall) Vendor No. PT24004 PT24004 PT24004 PT24004 PT24004 PT24004 PT24004 PT24004 PT24004 PT24004 PT24004 PT24004 PT24004 PT24004

Vendor No. PT24006 PT24006 PT24006 PT24006 PT24006 PT24006 PT24006 PT24006 PT24006

Part No. PT20004 PT20044 PT20005 PT20006 PT20008 PT20010 PT20012 PT20016

Max. Work Min. Burst Min. Bend Pressure Pressure Radius Lbs./100 Tube O.D. Tube Wall PSI 70ºF PSI 70ºF 70°F ft. 1/4 (.250) .062 65 195 1.0” 2.0 1/4 (.250) .040 55 165 1.0” 2.0 5/16 (.312) .062 55 165 1.25” 2.6 3/8 (.375) .062 55 165 1.5” 3.3 1/2 (.500) .062 45 135 2.0 4.6 5/8 (.625) .062 30 90 2.5” 5.9 3/4 (.750) .094 40 120 3.0” 10.3 1 (1.00) .125 .35 105 4.0” 18.5

Part No. 450032-131280 450033-131280 450034-131280 450035-131280 450036-131280 450037-131280 450038-131280 450039-131280

Color Clear Clear Clear Clear Clear Clear Clear Clear

Vendor No. PT20004 PT20044 PT20005 PT20006 PT20008 PT20010 PT20012 PT20016

Tube OD 1/4 1/4 5/16 3/8 1/2 5/8 3/4 1

Coil Lgth. 100 100 100 100 100 100 100 100

Coil Lgth. 100 100 100 100 100 100 100 100 Price /Roll $23.28 84.50 38.26 44.83 60.85 76.90 124.00 217.00

10_pHyd_43-96.qxd

3/11/07

2:13 PM

Page 43

NYLON 6/6 AND NYLON II TUBING

PT230 Polyamide “Nylon 6/6" • Typical Application: Semi-rigid general purpose tubing. • Temperature Range: -40°F to +180°F (-40°C to +82°C) • Available Colors: Natural and black. FDA colors available on request. • Contains: Ultra-Violet stabilizer in black tubing. • Note: * IS BULK. COLOR GUIDE: NA = Natural, BK = Black, YW = Yellow, OR = Orange, BU = Blue, RD = Red, GN=Green, GY = Gray

Specifications Part No. PT23002 PT23003 PT23004 PT23005 PT23006 PT23008

Max. Work Min. Burst Min. Bend Pressure Pressure Radius Lbs./100 Tube O.D. Tube Wall PSI 70ºF PSI 70ºF 70°F ft. 1/8 (.125) .015 300 1000 .75" .3 3/16 (.188) .023 300 1000 1.25" .6 1/4 (.250) .030 300 1000 1.5" 1.0 5/16 (.312) .036 300 1000 2.0" 1.5-1.6 3/8 (.375) .040 300 1000 2.25" 2.1 1/2 (.500) .062 300 1000 3.0" 4.2-4.3

Coil Lgth. 100,*1000 100,*1000 100,*1000 100,*1000 100,*1000 100,*500

Natural compound covered under FDA 21CFR177.1500 regulations for food contact. Part No. 450040-131280 0450581 450041-131280 450042-131280 0450583 450043-131280 0450584 450044-131280 0450585 450045-131280 0450586 450046-131280 0450587 0450588 450048-131280 0450589 450049-131280 450050-131280 0450591 450051-131280 0450592

Color NA BK NA NA BK NA BK NA BK NA BK NA BK BK NA BK NA NA BK NA BK

Vendor No. PT23002 PT2300 PT23002 PT23003 PT23003 PT23003 PT23003 PT23004 PT23004 PT23004 PT23004 PT23005 PT23005 PT23005 PT23006 PT23006 PT23006 PT23008 PT23008 PT23008 PT23008

Tube O.D. 1/8 1/8 1/8 3/16 3/16 3/16 3/16 1/4 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 1/2 1/2 1/2 1/2

Coil Lgth. 100 100 *1000 100 100 *1000 *1000 100 100 *1000 *1000 100 100 *1000 100 100 *1000 100 100 500 *500

Price /Rol $21.50 21.50 145.30 35.50 35.50 285.00 285.00 47.50 47.50 295.50 295.50 59.75 59.75 372.50 87.45 87.45 535.30 125.00 125.00 425.00 425.00

• Typical Application: Flexible nylon tubing. Used for instrumentation; lubrication and air lines; gas, chemical and oil processing; low pressure hydraulics. • Temperature Range: -40°F to +200°F (-40°C to +93°C) • Available Colors: Black or natural • Contains: Ultra-Violet stabilizer in black tubing. • Note: * IS BULK. COLOR GUIDE: NA = Natural, BK = Black, YW = Yellow, OR = Orange, BU = Blue, RD = Red, GN=Green, GY = Gray Vendor No. 250 250 250 250 250 250

Part No. Color TP16002 1/8 (.125) .023 TP16025 5/32 (.156) .029 TP16004 1/4 (.250) .040 TP16005 5/16 (.312) .040 TP16006 3/8 (.375) .062 TP16008 1/2 (.500) .062

Tube O.D. Coil Lgth. 1000 5/8" 0.3 1000 1" .75 1000 1-1/4" 1.2 1000 2" 2.0 1000 3.0" 2.7 1000 4.5" 3.8

Price /Roll 100,*1000 100,*1000 100,*1000 100,*1000 100,*1000 100,*500

Part No. 450052-131280 0450593 450053-131280 0450594 450054-131280 0450595 450055-131280

Color NA BK NA BK NA BK NA

Vendor No. TP16002 TP16002 TP16002 TP16002 TP16025 TP16025 TP16025

Tube O.D. 1/8 1/8 1/8 1/8 5/32 5/32 5/32

Coil Lgth. 100 100 *1000 *1000 100 100 *1000

Price /Rol $25.20 25.20 210.00 210.00 26.50 26.50 238.50

0450596 450056-131280 0450597 450057-131280 0450598 450058-131280 0450599 450059-131280 0450600 450060-131280 0450601 450061-131280 0450602 450062-131280 0450603 450063-131280 0450604

BK NA BK NA BK NA BK NA BK NA BK NA BK NA BK NA BK

TP16025 TP16004 TP16004 TP16004 TP16004 TP16005 TP16005 TP16005 TP16005 TP16006 TP16006 TP16006 TP16006 TP16008 TP16008 TP16008 TP16008

5/32 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2

*1000 100 100 *1000 *1000 100 100 *1000 *1000 100 100 *1000 *1000 100 100 500 500

238.50 53.40 53.40 496.50 496.50 73.20 73.20 655.00 655.00 110.00 110.00 995.90 995.90 162.00 162.00 790.00 790.00

MTP160 Polyamide “Nylon 11" Metric Tubing • Typical Application: Flexible nylon tubing. Used for instrumentation; lubrication and air lines; gas, chemical and oil processing; low pressure hydraulics. • Temperature Range: -40°F to +200°F (-40°C to +93°C) • Contains: Ultra-violet stabilizer. • Available Colors: Natural Specifications Part No. Tube O.D. Tube Wall MTP16004 4 .65 MTP16005 5 1 MTP16006 6 1 MTP16008 8 1 MTP16010 10 1 MTP16012 12 1 Part No. 450064-131280 450065-131280 450066-131280 450067-131280 450068-131280 450069-131280

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Max. Work Min. Burst Min. Bend Pressure Pressure Radius Lbs./100 PSI 70ºF PSI 70ºF 70°F ft. 250 1000 3/4 0.6 250 1000 1 0.9 250 1000 1-1/2 1.1 250 1000 2-1/4 1.5 200 800 3 1.9 112 450 3-1/2 2.3

Vendor No. MTP16004 MTP16005 MTP16006 MTP16008 MTP16010 MTP16012

Tube O.D. 4mm 5mm 6mm 8mm 10mm 12mm

Coil Lgth. 100 100 100 100 100 100

Coil Lgth. 100 100 100 100 100 100 Price /Roll $32.20 71.50 84.80 109.00 132.00 164.00

10-43 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Tubing

TP160 Polyamide “Nylon 11"

Thermoplastic Tubing Cont.

10_pHyd_43-96.qxd

3/11/07

2:13 PM

Page 44

THERMOPLASTIC TUBING & TUBE CUTTING TOOLS Thermoplastic Tubing Cont.

Nylon 12 Tubing (Fractional and Metric) Cont.

Tubing

Nylon 12 Tubing (Fractional and Metric) • Considered as the industry standard for applications requiring higher working pressures • Higher heat and better chemical resistance than polyurethane • Longer service info • For use with push-to-connect, compression, or barbed fittings

Part No. Fractional 0448269 0448270 0448273 0448355 0448356 0448359 0448358 0448362 0448357 0448361 0448839 0448842 0448840 0448443 0448234 0448235 0448238 0448237 0448241 0448236 0448239 0448714 0448715 0448718 0448420 0448421 0448297 0448298 0448301 0448300 0448302 0448779 0448780 0448201 0448202 0448205 0448322 0448681 0448682

Vendor No.

OD

ID

Coil Length

Color

Price /Roll

N18ANA N18ABK N18AB N532ANA N532ABK N532AB N532AR N532AOR

1/8 1/8 1/8 5/32 5/32 5/32 5/32 5/32

.062 .062 .062 .106 .106 .106 .106 .106

100 100 100 100 100 100 100 100

Natural Black Blue Natural Black Blue Red Orange

$14.53 14.53 14.53 16.82 16.82 16.82 16.82 16.82

N532AG N532AY N532CBK N532CB N532CG N532DB N14ANA N14ABK N14AB N14AR N14AOR N14AG N14AY N14CNA N14CBK N14CB N14DNA N14DBK N38ANA N38ABK N38AB N38AR N38AY N38CNA N38CBK N12ANA N12ABK N12AB N12AR N12CNA N12CBK

5/32 5/32 5/32 5/32 5/32 5/32 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2

.106 .106 .106 .106 .106 .106 .180 .180 .180 .180 .180 .180 .180 .180 .180 .180 .180 .180 .275 .275 .275 .275 .275 .275 .275 .375 .375 .375 .375 .375 .375

100 100 500 500 500 1000 100 100 100 100 100 100 100 500 500 500 1000 1000 100 100 100 100 100 500 500 100 100 100 100 500 500

Green Yellow Black Blue Green Blue Natural Black Blue Red Orange Green Yellow Natural Black Blue Natural Black Natural Black Blue Red Yellow Natural Black Natural Black Blue Red Natural Black

16.82 16.82 86.35 86.35 86.35 154.06 31.79 31.79 31.79 31.79 31.79 31.79 31.79 152.70 152.70 152.70 305.40 305.40 67.56 67.56 67.56 67.56 67.56 331.98 331.98 111.61 111.61 111.61 53.13 508.49 508.49

Part No. Metric 0448527 0448528 0448531 0448523 0448525 0448538 0448554 0448555 0448557 0448556 0448558 0445798 0445801 0448577 0448578 0448579 0448581 0448580 0445803 0445807 0448468 0448469 0448472 0448475

Vendor No.

OD

ID

Coil Length

Color

Price /Roll

N04MENA N04MEBK N04MEB N04MER N04MEY N06MENA N06MEBK N06MEGY N06MEB N06MER N06MEY N06MFBK N06MFB N08MENA N08MEBK N08MEGY N08MEB N08MER N08MFNA N08MFB N10MENA N10MEBK N10MEB N12MENA

4mm 4mm 4mm 4mm 4mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 10mm 10mm 10mm 12mm

2.3mm 2.3mm 2.3mm 2.3mm 2.3mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 8mm 8mm 8mm 10mm

25m 25m 25m 25m 25m 25m 25m 25m 25m 25m 25m 100m 100m 25m 25m 25m 25m 25m 100m 100m 25m 25m 25m 25m

Natural Black Blue Red Yellow Natural Black Grey Blue Red Yellow Black Blue Natural Black Grey Blue Red Natural Blue Natural Black Blue Natural

$25.90 28.85 28.85 20.31 20.31 43.05 43.05 43.05 43.05 43.05 43.05 167.37 167.37 56.91 56.91 56.91 56.91 56.91 199.25 199.25 76.76 76.76 76.76 89.61

0448476 0448477 0448491 0448495 0448496

N12MEBK N12MEB N14MENA N14MEBK N14MENB

12mm 12mm 14mm 14mm 14mm

10mm 10mm 12mm 12mm 12mm

25m 25m 25m 25m 25m

Black Blue Natural Black Blue

89.61 89.61 115.25 115.25 115.25

Tube Cutting Tools Plastic Tube and Hose Cutter This versatile tool is light weight and durable for long service life. 1" capacity. NOTE: Not for use with wire reinforced hose. Part No. 0450605

A tool designed to be small, only 2-7/8" long. Offers quick and clean square cuts on 1/16" to 1/2" O.D. plastic tubing and non-wire reinforced hose. Part No. 0450606

10-44 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Each $41.98

Price /Each $12.18

10_pHyd_43-96.qxd

3/11/07

2:13 PM

Page 45

COALESCING FILTERS AND FILTER ELEMENTS Air Preparation

Air Treatment

Coalescing Filters Aluminum Construction Finite’s coalescing filters are designed with our specialized UNI-CAST glass microfibers, providing you with lower pressure drop and longer filter life. *A = Automatic float drain included, D = Differential Pressure Gauge included, I = Differential Pressure Indicator included. Part No. 0422257 0422258 0422259 0422260 0422261 0422262 0422263 0422264

Vendor No. HN2S-6CW HN2L-6CW HN5S-6CUY HN6S-6CUY HN8S-6CUY HN8L-6CUY HN0L-6CUY HN12L-6CUY

Weight 1.44 1.85 12.11 11.97 14 15.99 35 34.14

Description Accessories Included: A, I Accessories Included: A, I Accessories Included: A, D Accessories Included: A, D Accessories Included: A, D Accessories Included: A, D Accessories Included: A, D Accessories Included: A, D

Length 9.4 “ 9.4 “ 21.66 “ 21.66 “ 27.66 “ 32.66 “ 39.13 “ 39.13 “

Flow Rate 25 SCFM 50 SCFM 250 SCFM 350 SCFM 450 SCFM 625 SCFM 800 SCFM 1000 SCFM

Port Size 1/2" 1/2" 1 1/4" 1 1/2" 2" 2" 2 1/2" 3"

Maximum Maximum Pressure Temperature (PSI) 175 F 250 PSIG 175 F 250 PSIG 175 F 250 PSIG 175 F 250 PSIG 175 F 250 PSIG 175 F 250 PSIG 175 F 250 PSIG 175 F 250 PSIG

Micron 0.01 um 0.01 um 0.01 um 0.01 um 0.01 um 0.01 um 0.01 um 0.01 um

Efficiency (%) 99.97 99.97 99.97 99.97 99.97 99.97 99.97 99.97

Price /Ea $192.05 217.29 691.87 816.69 1164.21 1280.65 1485.97 1808.89

Micron 100 um 100 um

Price /Ea $184.20 510.41

Efficiency (%) – 99.97

Price /Ea $123.54 90.03

Water Separator Filters Aluminum Construction Finite’s liquid separators are ideal for removing bulk amounts of liquid from a compressed air or gas stream. *A = Automatic float drain included.

Part No. 0422255 0422256

Vendor No. HN2S-100WSUA HN4S-100WSUA

Weight 1.44 3.29

Description Accessories Included: A Accessories Included: A

Height 7.59" 11.65"

Flow Rate 83 SCFM 232 SCFM

Maximum Temperature 175 F 175 F

Port Size 1/2" 1"

Maximum Pressure (PSI) 250 PSIG 250 PSIG

Coalescing Filters and Water Separator Filters Aluminum Head with Clear Bowl

Part No. 0422265 0422266

Vendor No. QN1N-100WSUN QN1N-6CN

Description Removes Water Removes Oil

Weight 0.86 0.86

Width 3.12" 3.12"

Length 5.5 “ 5.5 “

Flow Rate 50 SCFM 15 SCFM

Port Size 1/4" 1/4"

Maximum Temperature 125 F 125 F

Maximum Pressure (PSI) 125 PSIG 125 PSIG

Micron 100 um .01 um

Replacement Coalescing Filter Elements

Part No. 0422267 0422268

Vendor No. 6C10-025 X 8 6C10-050 X 4

Description Replacement Filter fits Fastenal Part Numbers: 0422257 and 0422266 Replacement Filter fits Fastenal Part Number: 0422258

Weight 0.06 0.13

Price /Ea $18.26 31.73

Weight 0.5 1

Price /Ea $56.10 116.33

Replacement Water Separator Filter Elements

Part No. 0422269 0422270

Vendor No. 100WSU10-025 X 1 100WSU15-060 X 1

Description Replacement filter element fits Fastenal Part Numbers: 0422255 and 0422265 Replacement filter element fits Fastenal Part Number: 0422256

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

10-45 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_43-96.qxd

3/11/07

2:14 PM

Page 46

DESSICANT FILTERS & FILTER ACCESSORIES Air Treatment Cont. Air Preparation

Desiccant Dryer Housing Finite’s desiccant dryers remove water vapor from compressed air and protect critical point-of-use equipment Part No. 0422276 0422277 0422278

Vendor No. FDD15-02 FDD30-04 FDD60-08

Weight 8 13 20

Length 13-1/2 “ 23-1/4 “ 30-1/4"

Width 4-15/16" 4-15/16" 4-15/16"

Maximum Pressure Rating 300 PSIG 300 PSIG 300 PSIG

Flow Rate 15 SCFM 30 SCFM 60 SCFM

Connector Size 1/4" 1/2" 1"

Price /Ea $249.42 400.33 597.80

Silica Gel Dessicant for FDD Dryers Replaceable silica gel desiccant is used to remove water vapor from compressed air. Part No. 0422279

Vendor No. FSGM100-1

0422280

FSGM100-4

Description Silica Gel Desiccant, 5lb Can Silica Gel Desiccant, 4 x 5lb Cans

Weight (lbs.) 5

Price /Ea $97.45

20

332.80

Inline Indicator for Water and Oil Oil/Water indicator provides peace-of-mind for critical applications by indicating the presence of liquid oil or water in a compressed air system.

Part No. 0422281 0422282

Vendor No. KSDS-W KSDS-O

Description Water Indicator Oil Indicator

Weight .05 lbs. .05 lbs.

Maximum Temperature 125 F 125 F

Port Size 1/8" 1/8"

Maximum Pressure (PSI) 100 PSIG 100 PSIG

Price /Ea $43.84 43.84

Disposable Inline Filter Finite’s high efficiency, disposable inline filters are great for instrument air panels, analyzer and sensor protection, gas sampling, micro-system operation, robot and animation air preparation. Part No. 0422283

Vendor No. IDN-6G X 10

Weight 0.1

Width 1"

Length 3.3"

Flow Rate 3.5 SCFM

Maximum Temperature 125 F

Port Size 1/4" OD

Maximum Pressure (PSI) 100 PSIG

Price /Ea $9.77

Electrically Timed Solenoid Drain Valve Finite’s timed solenoid drain valves can be set to automatically remove condensate at varying frequencies throughout the day.

Vendor No. TV-25 TV-50

Part No. 0422271 0422272

Description 1/4" NPT, 300 PSIG Max. 1/2 NPT, 300 PSIG Max.

Price /Ea $129.04 129.04

Drip Leg Drain Finite’s drip leg kits are ideal for removing free water at air drops throughout a manufacturing facility.

Part No. 0422274

Vendor No. DL2-VS50

Description Visual sump and automatic float drain

Port Size 1/2"

Price /Ea $317.64

Zero Air Loss Drain Valve Finite’s zero loss drains will automatically remove condensate without the loss of valuable compressed air.

Part No. 0422273

Vendor No. ZLD-013

10-46 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Port Size 1/2"

Maximum Pressure (PSI) 232 PSIG

Price /Ea $259.18

10_pHyd_43-96.qxd

3/11/07

2:14 PM

Page 47

FILTERS, REGULATORS & LUBRICATORS Air Preparation

Air Treatment Cont.

Filters Standard Filters Designed to remove rust, scale, condensed water, and other debris from compressed air lines which may cause wear and premature failure of tools, valves, cylinders, and other pneumatic equipment. Bowl guard has full length slots for easy visual checking of fluids. Note: Port size in NPT. Port Size 1/4" 1/2" 3/4" 1"

Max. Flow CFM 54 122 120 120

Filter 40m 40m 40m 40m

Bowl Type Poly with Guard Poly with Guard Poly with Guard Poly with Guard

Bowl Size 6 oz. 6 oz. 10 oz. 10 oz.

Max. Inlet Pressure 150 150 200 200

Max. Temp. 125 125 125 125

Part No. 0470040 0470042 0470043 0470044

Vendor No. F25221-100 F25241-100 25351-020 25361-020

Ship Wt. (lbs) 1.48 1.43 3.48 3.26

Price /Each $33.32 33.32 93.27 93.27

Regulators Provides controlled, consistent air pressure as required for specific pneumatic equipment connected to the compressed air system. Relieving models vent downstream overpressure. Supplied with gauge. Can be mounted up, down or panel/wall mounted. Note: Port size and gauge port in NPT.

Port Size 1/8" 1/4" 1/4" 3/8" 1/2" 3/4"

Pressure Range 5-125 5-125 5-125 5-125 5-125 5-125

Max. Flow CFM 13 13 100 130 150 287

Gauge Port 1/8" 1/8" 1/4" 1/4" 1/4" 1/4"

Max. Inlet Pressure 200 200 200 200 200 250

Vendor No. R27111-600 R27121-600 R27221-600 R27231-600 R27241-600 27354-600

Part No. 0470052 0470053 0470054 0470055 0470056 0470057

Ship Wt. (lbs) 1.38 1.34 1.38 1.34 1.3 3.21

Price /Each $23.78 23.78 46.46 46.46 46.46 106.20

Should be installed close to the downstream application to ensure effective distribution of oil to the pneumatic components. Bowl guard has full length slots for easy visual checking of lubricant. Note: Port size in NPT.

Air Lubricators

Port Size 3/8" 1/2" 3/4"

Flow Rate

Bowl Type

Bowl Size

Max. Temp.

Max. Inlet Pressure

Part No.

Vendor No.

Ship Wt. (lbs)

Price /Each

100 110 100

Poly with Guard Poly with Guard Poly with Guard

6 oz. 6 oz. 10 oz.

125 125 125

150 150 200

0470069 0470070 0470071

L26231-100 L26241-100 26351-020

1.44 1.36 2.98

$48.04 48.04 120.21

Ship Wt. (lbs) 0.29 2.05 2.03 2.00 6.00

Price /Each $36.90 63.77 63.77 63.77 142.45

Filter\Regulator (1 Piece) Combined air filtration and regulation in a single, compact unit. Saves space for added system design flexibility. Piggyback filter regulators supplied with pressure gauge. Bowl guard has full length slots for easy visual checking of lubricant. Note: Port size and gauge port in NPT.

Port Size 1/4" 1/4" 3/8" 1/2" 3/4"

Pressure Range 5-125 5-125 5-125 5-125 5-125

Filter 20m 40m 40m 40m 40m

Gauge Port 1/8" 1/4" 1/4" 1/4" 1/4"

Max. Flow CFM 13 93 135 140 140

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Bowl Type Poly with Guard Poly with Guard Poly with Guard Poly with Guard Poly with Guard

Bowl Size 1 oz. 6 oz. 6 oz. 6 oz. 8 oz.

Max. Inlet Pressure 125 125 125 125 125

Part No. 0470060 0470061 0470062 0470063 0470064

Vendor No. P29122-600 P29221-600 P29231-600 P29241-600 P29351-600

10-47 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_43-96.qxd

3/11/07

2:14 PM

Page 48

FILTERS, REGULATORS & LUBRICATORS Air Treatment Cont.

Modular Air Regulator

Air Preparation

• High relief sensitivity, comes with gage and mounting bracket • 0-160 PSI In the Vendor Number, BG = Round Pressure Gauge and BE = Square Embedded Pressure Gauge.

Filter/Regulator/Lubricator 2 Piece Combination Filter-Regulator-Lubricator and gauge

Port Size 1/4" 1/2" 1"

Max. Flow CFM 15 150 150

Bowl Size 1 oz. 6 oz. 8 oz.

Max. Inlet Pressure 150 150 200

Part No. 0470081 0470084 0470086

Vendor No. C28121-600 C28241-600 C28361-600

Ship Wt. (lbs) 4.06 3.9 5.8

Price /Each $57.95 129.78 186.43

Part No. 0421957 0421958 0421959 0421960 0421961 0421962 0421963 0421964 0421965 0421966 0421967

Vendor No. AR10-M5BG-Z AR20-N01BG-Z AR20-N02BG-Z AR30-N03BG-Z AR40-N04BG-Z AR50-N06BG-Z AR60-N10BG-Z AR20-N01BE-Z AR20-N02BE-Z AR30-N03BE-Z AR40-N04BE-Z

Price /Ea $27.39 28.77 28.77 38.45 46.64 73.48 122.49 28.77 28.77 38.45 46.64

Port Size M5 1/8" NPT 1/4" NPT 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT 1/8" NPT 1/4" NPT 3/8" NPT 1/2" NPT

Filter/Regulator/Lubricator 3 Piece Combination FilterRegulator-Lubricator and gauge

Port Size 3/8" 1/2"

Max. Flow CFM 130 150

Bowl Size 6 oz. 6 oz.

Max. Inlet Pressure 150 150

Modular Air Lubricator • Large bowl capacities • Lubrication volume adjustment setting • Mounting Bracket

Part No. 0470076 0470077

Vendor No. C28231-800 C28241-800

Ship Wt. Price (lbs) /Each 5.4 $157.49 5.3 157.49

Regulator Mounting Brackets

Part No. 0421968

Vendor No. AL10-M5-3Z

0421969

AL20-N01B-3CZ

0421970

AL20-N02B-3CZ

0421971

AL30-N03B-3Z

0421972

AL40-N04B-3Z

0421973

AL50-N06B-3Z

0421974

AL60-N10B-3Z

• Easy to install wall mount bracket

Usage Mid-Size1/4" -3/8" -1/2" NPT

Part No. 0470095

Vendor No. 104172

Price /Each $6.75

Description Lubricator with Bracket and Drain Cock Lubricator with Bracket, Bowl Guard, Drain Cock Lubricator with Bracket and Drain Cock Lubricator with Bracket and Drain Cock Lubricator with Bracket and Drain Cock Lubricator with Bracket and Drain Cock Lubricator with Bracket and Drain Cock

Port Size M5X0.8

Price /Ea $15.73

1/8" NPT

33.25

1/4" NPT

33.25

3/8" NPT

39.22

1/2" NPT

47.47

3/4" NPT

73.43

1" NPT

95.15

Modular Combo Filter/Regulator • Compact space saving design • Comes with Bracket and Gage • Modular Design

5 Micron Modular Air FIlter • 5 micron filtration • Bracket and bowl guard included

Part No. 0421950 0421951 0421952 0421953 0421954 0421955 0421956

Vendor No. AF10-M5-Z AF20-N01B-CZ AF20-N02B-CZ AF30-N03B-Z AF40-N04B-Z AF50-N06B-Z AF60-N10B-Z

Description Rotary type Drain cock Float type auto-drain Float type auto-drain Rotary type Drain cock Rotary type Drain cock Rotary type Drain cock Rotary type Drain cock

10-48 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

In the Vendor Number, BG = Round Pressure Gauge and BE = Square Embedded Pressure Gauge.

Port Size M5X0.8 1/8" NPT 1/4" NPT 3/8" NPT 1/2"PT 3/4" NPT 1" NPT

Price /Ea $13.97 28.22 28.22 34.32 46.26 75.90 95.15

Part No. 0421975 0421976 0421977 0421978 0421979 0421980 0421981 0421982 0421983 0421984 0421985

Vendor No. AW10-M5BG-Z AW20-N01BG-CZ AW20-N02BG-CZ AW30-N03BG-Z AW40-N04BG-Z AW40-N06BG-Z AW60-N10BG-Z AW20-N01BE-CZ AW20-N02BE-CZ AW30-N03BE-Z AW40-N04BE-Z

Port Size M5X0.8 1/8" NPT 1/4" NPT 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT 1/8" NPT 1/4" NPT 3/8" NPT 1/2" NPT

Price /Ea $39.77 46.92 46.92 57.75 79.97 99.99 144.32 46.95 46.95 57.75 79.97

10_pHyd_43-96.qxd

3/11/07

2:15 PM

Page 49

AIR TREATMENT & FLOW CONTROLS Air Treatment Cont.

• Long life, easy replacement

Modular Combo Filter/Regulator/Lubricator • Space-saving design • Comes with Gauge • Easy Assembly and Mounting Vendor Part No. No. Port Size Filter/Regulator/Lubricator Combination 0421991 AC10-M5G-3Z M5x0.8 0421992 AC20-N01G-3CZ 1/8" NPT 0421993 AC20-N02G-3CZ 1/4" NPT 0421994 AC30-N03G-3Z 3/8" NPT 0421995 AC40-N04G-3Z 1/2" NPT 0421996 AC50-N06G-3Z 3/4" NPT Filter/Regulator Combination with Piggyback style Filter Regulator 0421997 AC60-N10G-3Z 1" NPT 0421998 AC10A-M5G-3Z M5x0.8 0421999 AC20A-N01G-3CZ 1/8" NPT 0422000 AC20A-N02G-3CZ 1/4" NPT 0422001 AC30A-N03G-3Z 3/8" NPT 0422002 AC40A-N04G-3Z 1/2" NPT

Price /Ea $67.93 90.75 90.75 115.45 146.58 226.44 316.42 58.74 78.16 78.16 96.53 128.37

Use With AC10 AC 20 AC30 AC60 AC40 (3/4") AC50 & AC60 AC10 with T-Type Mounting Bracket AC20 with T-Type Mounting Bracket AC30 with T-Type Mounting Bracket AC40 with T-Type Mounting Bracket AC40 with T-Type Mounting Bracket AC50 with BracT-Type Mounting Bracket

Price /Ea $5.14 4.84 6.11 6.99 7.81 8.69 6.11 7.04 7.81 8.69 9.57 11.99

Modular Mist Separator • .3 Micron Filtration • Mounting bracket and blow guard provided

Part No. 0421986 0421987 0421988 0421989 0421990

Vendor No. AFM20-N01B-CZ AFM20-N02B-CZ AFM30-N03B-Z AFM40-N04B-Z AFM40-N06B-Z

Description Replacement for AMG150 Filter Replacement for AMG250 Filter Replacement for AMG350 Filter Replacement for AMG450 Filter Replacement for AMG550 Filter Replacement for AMG650 Filter Replacement for AMG850 Filter

Price /Ea $28.34 36.60 44.20 68.97 105.56 162.11 353.15

Flow Controls

• Easy installation • Push-to-connect tube fitting • M5 Port Connection to Elbow Tube

Easy and quick assembly.

Vendor No. Y100 Y200 Y300 Y400 Y500 Y600 Y100T Y200T Y300T Y400T Y500T Y600T

Vendor No. AMG-EL150 AMG-EL250 AMG-EL350 AMG-EL450 AMG-EL550 AMG-EL650 AMG-EL850

Meter-Out Flow Control

Modular Connector Spacer

Part No. 0422009 0422010 0422011 0422012 0422013 0422014 0422015 0422016 0422017 0422018 0422019 0422020

part No. 0422028 0422029 0422030 0422031 0422032 0422033 0422034

Description Float Type Auto-Drain Float Type Auto-Drain Rotary Type Drain Cock Rotary Type Drain Cock Rotary Type Drain Cock

Port Size 1/8" NPT 1/4" NPT 3/8" NPT 1/2" NPT 3/4" NPT

Price /Ea $54.78 54.78 57.86 67.27 76.51

Part No. 0422035 0422036 0422037

Vendor No. AS1201F-M5-01 AS1201F-M5-03 AS1201F-M5-07

Tube Size 1/8" 5/32" 1/4"

Price /Ea $8.84 8.84 8.84

Meter-Out Flow Control with Thread Sealant • Easy installation • Push-to-connect tube fitting • Pre-applied thread sealant

Part No. 0422038 0422039 0422040

Vendor No. NAS2201F-N01-01S NAS2201F-N01-03S NAS2201F-N01-07S

NPT Size 1/8" 1/8" 1/8"

Tube Size 1/8" 5/32" 1/4"

Price /Ea $14.04 12.22 13.13

0422041 0422042 0422043 0422044 0422045 0422046

NAS2201F-N02-03S NAS2201F-N02-07S NAS2201F-N02-11S NAS3201F-N03-07S NAS3201F-N03-11S NAS4201F-N03-13S

1/4" 1/4" 1/4" 3/8" 3/8" 3/8"

5/32" 1/4" 3/8" 1/4" 3/8" 1/2"

14.04 14.04 16.84 17.75 18.72 43.81

Meter-In Flow Control with Thread Sealant • Easy installation • Push-to-connect tube fitting • Pre-applied thread sealant

Water Separators AMG Series • Comes with Bracket • Removes 99% of all liquid present in line

Part No. 0422021 0422022 0422023 0422024 0422025 0422026 0422027

Vendor No. AMG150-N02BC AMG250-N03BC AMG350-N04BC AMG450-N06BC AMG550-N10BC AMG650-N14BD AMG850-N20BD

Size 1/4" 3/8" 1/2" 3/4" 1" 1-1/2" 2"

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price /Ea $99.36 144.66 204.18 292.92 380.40 510.42 1338.93

Part No. 0422047 0422048 0422049 0422050 0422051 0422052 0422053 0422054 0422055

Vendor No. NAS2211F-N01-01S NAS2211F-N01-03S NAS2211F-N01-07S NAS2211F-N02-03S NAS2211F-N02-07S NAS2211F-N02-11S NAS3211F-N03-07S NAS3211F-N03-11S NAS4211F-N04-13S

NPT Size 1/8" 1/8" 1/8" 1/4" 1/4" 1/4" 3/8" 3/8" 1/2"

Tube Size 1/8" 5/32" 1/4" 5/32" 1/4" 3/8" 1/4" 3/8" 1/2"

Price /Ea $14.04 12.22 13.13 14.04 14.04 16.84 17.75 18.72 21.45

10-49 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Pneumatic Valves & Accessories

Replacement Filter Elements for AMG Separators

10_pHyd_43-96.qxd

3/11/07

2:15 PM

Page 50

FLOW CONTROLS AND PNEUMATIC VALVES Flow Controls Cont.

Pneumatic Valves

Pneumatic Valves & Accessories

Metric Meter-Out Flow Control

Nova Control Valves

• Easy installation • Push-to-connect tube fitting • M5 Port Connection to Elbow Tube Vendor No. AS1201F-M5-04

Part No. 0422056

Price /Ea $8.84

Tube Size 4mm

Metric Meter-Out Flow Control with Thread Sealant • Easy installation • Push-to-connect tube fitting • Pre-applied thread sealant Vendor No. AS2201F-01-04S AS2201F-01-06S AS2201F-01-08S AS2201F-02-04S AS2201F-02-06S AS2201F-02-08S AS3201F-03-08S AS3201F-03-10S AS3201F-03-12S

Part No. 0422057 0422058 0422059 0422060 0422061 0422062 0422063 0422064 0422065

NPT Size 1/8" 1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8"

Price /Ea $12.22 13.13 14.04 14.04 14.04 14.95 18.72 18.72 18.72

Tube Size 4mm 6mm 8mm 4mm 6mm 8mm 8mm 10mm 12mm

Vendor No. AS1001F-01 AS1001F-03 AS2001F-07 AS3001F-11 AS4001F-13

Tube x Tube 1/8" - 1/8" 5/32" - 5/32" 1/4" - 1/4" 3/8" - 3/8" 1/2" - 1/2"

Price /Ea $15.99 15.99 21.13 31.92 35.23

Metric Tube-Tube In-Line Flow Controls Tube x Tube 4mm - 4mm 6mm - 6mm 8mm - 8mm 10mm - 10mm 12mm - 12mm

Use in place of needle type flow controls for a much smoother flow.

0423212 MF1-12 0423213 MF1-25 0423214 MF1-37

Aluminum Aluminum Aluminum

Type Push Button Foot Pedal

Actuator Return Push Button spring

0423152

N2-SP

Air Pilot

spring

Length Max. Pressure 1-1/4" 250 Air/250 Oil 2" 2-1/2" 2-7/8"

Description Holds in 2 positions Cast Alum 5 Port/4Way Foot Pedal Valve w/Guard Cast Alum 5 Port/4Way Single Air Piloted Valve

Price /Ea $63.60 117.25 45.91

Ergonomic Low Stress Air Valves

LTV Low Stress valves are ported 1/8" NPT. They are shipped with a 3-way normally closed flow pattern for pilot applications, but can be easily converted to 3-way normally open or 4-way flow by removing a port plug. Part No. 0423153 0423155

Part No. 0423154 0423156 0423157 0423158

Dyla-Trol axial flow control allows fine tuning and accurate adjustment of cylinder speed. Mount as close to cylinder as possible.

Port Size 1/4-28 male & 1/4-28 female 1/8 NPTF 1/4 NPTF 3/8 NPTF

Vendor No. N2-PB N2-F4

Vendor No. LTV-PB LTV-PBGF

Work Pressure (PSI) 25 to 125psi 25 to 125psi

Mount Style Side Foot

Description Basic Valve (unguarded) Valve with Button Guard

Price /Ea $57.66 66.63

Mead’s LTV valves are compact 1/8" ported 4-way valves that may be actuated by hand, remote air signal, electric signal, or mechanically by a machine element. They are ideal for powering small or medium sized cylinders and for piloting larger valves. Some models require as little as 4 ounces of force and .010" of plunger travel to actuate.

Price /Ea $15.99 21.13 31.92 31.92 31.92

Dyla-Trol® Flow Controls

Vendor Part No. No. Body Material 0423211 MF1-02 Brass

Part No. 0423150 0423151

Light Touch 4-way Air Valves

Quick disconnect one-touch connections. Vendor No. AS1001F-04 AS2001F-06 AS3001F-08 AS3001F-10 AS3001F-12

Single and double solenoid models available.

Ergonomically designed to respond to extremely low actuation forces, Mead’s Low Stress actuators require as little as 6 ounces of force to initiate a signal. This valve will dramatically reduce the demands on your workers’ hands, wrists, and arms.

Quick disconnect one-touch connections.

Part No. 0422068 0422072 0422073 0422074 0422075

Large Air Flow with Dual Exhausts - 1/4" NPTF ported Nova valves produce a large output flow of 57 cubic feet per minute at 100 PSI inlet pressure (CV=1.0). Each output port has its own exhaust port so that individual exhaust control is possible Manual Override as Standard - All Nova valves are supplied with manual overrides so that valve actuation may be triggered without electricity or air to the pilots.

Tube-Tube In-Line Flow Control

Part No. 0422066 0422067 0422069 0422070 0422071

Designed for Long Life - Nova 4-way directional control valves offer state-of-the-art air valve design at a remarkably low price. Nova utilizes a single bonded rubber spool with finely ground sealing lands that travel only .047" ...less than 1/16th of an inch! This economy of movement assures long valve life yet generates enough flow to power a 4" bore cylinder.

Max. Flow Price CFM /Ea 8 $16.99

250 Air/1000 Oil 250 Air/1000 Oil 250 Air/1000 Oil

10-50 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

47 66 149

22.15 27.57 47.15

Vendor No. LTV-TP LTV-10 LTV-60 LTV-110

Type Two Position Straight Leaf Single Pressure Double Pressure

Actuator Return Manual Air Spring Air Spring Ext. Air Pilot

Price /Ea $91.86 49.55 49.81 48.86

10_pHyd_43-96.qxd

3/11/07

2:15 PM

Page 51

Pneumatic Valves Cont.

CSV-102 is a complete power package containing a 4-way power valve (CV=1.00) for direct actuation of single-acting or double acting air cylinders. Actuation sends a sustained air flow to one cylinder port. Releasing one or both buttons shifts the flow to the other cylinder port. Built-in mufflers reduce sound levels. Quick-connect fittings included. Unit has 1/8" NPT port size.

MICRO Line 3-way Air Switches MV valves are identical in size and actuating style to most industrial electric limit switches. Use them in place of electrical switches to eliminate spark hazard. Unit has 1/8" NPT port size.

Part No. 0423159 0423160 0423161 0423162

Vendor No. MV-10 MV-15 MV-20 MV-45

Type Straight Leaf Steel Roller 1-Way Roller Leaf Straight Plunger

Normally Closed Actuation Force Lbs.@ 100 PSI 1.2 1.0 29.49 30.18

Normally Open Actuation Force Lbs. @ 100 PSI 1.5 1.3

Part No. 0423202 Price /Ea $21.41 23.97

Vendor No. CSV-102

Description Steel Anti-Tiedown Two-Hand Machine Control System, Including 4-Way Valve

Price /Ea $597.40

Quick Exhaust Valves QEV quick exhaust valves increase cylinder speed by dumping exhaust air directly at the cylinder instead of through the control valve.

Binary Air Valve USV-100 provides alternating outputs from a single input. Two outputs are selected alternately by applying a pulsing, on-off pilot signal to the input port. Unit has 5/32" tube push-in fitting included. Ports for USV-100 are 5/32" tube push-in fittings. Part No. 0423163

Vendor No. USV-100

Description USV-100 Aluminum Binary Alternating Air Valve

Price /Ea $106.13

Part No. 0423203

Vendor No. #1B QEV

0423204

#2B QEV

0423205

#3 QEV

0423206

#4 QEV

Description Cast Zinc 1/4" NPT Port Mount Quick Exhaust Valve Cast Zinc 3/8" NPT Port Mount Quick Exhaust Valve Brass 1/8" NPT Port Mount Quick Exhaust Valve Aluminum 1/2" NPT Port Mount Quick Exhaust Valve

Price /Ea $19.81 24.04 18.35 24.12

Easy Glide Ball Handle Valves Low Friction Motion - MHL valves provide either 3way pilot control (MHL-3) or 4-way directional control (MHL-4). To operate MHL valves, simply move the ball handle across the slot on the valve body. The handle rotates a precision-lapped disc to control the directional flow of air. The hardcoat anodized aluminum disc allows virtually effortless handle motion. The handle will hold in any position. Air exhausts through the disc and out to atmosphere. Unit has 1/8" NPT port size. Easy to Mount and Repair - Base mount holes make mounting and removal quick and easy. Further, MHL valves are easy to disassemble. By simply removing the ball handle and snap ring, any part worn by use can be found and replaced. Part No. 0423164

Vendor No. MHL-3

0423165

MHL-4

Description MHL-3 Aluminum Base Mount 3-Way Easy Glide Ball Handle Valve MHL-4 Aluminum Base Mount 4-Way Easy Glide Ball Handle Valve

Price /Ea $51.69

59.94

Knob Flow Control Valve MASC flow control comes with knurled adjustment knob and a mounting jam nut.

Part No. 0423223 0423224 0423225 0423226

Vendor No. MASC100-06 MASC200-08 MASC300-10 MASC300-15

Port Size 1/8" NPT 1/4" NPT 3/8" NPT 1/2" NPT

Flow Rate Cv .407 Cv .813 Cv 1.524 Cv 2.54

Price /Ea $7.04 7.79 12.20 12.75

Detented Hand Lever Valves M4H hand lever spool valve has booted handle and is 2 position detented.

Two Hand Control Valves CSV-101 is a two-hand, anti-tie down air control. It will actuate any 3 or 4-way air piloted, spring return power valve or small single acting cylinder. CSVs are two-hand anti-tiedown controls. When used, they provide safer operation of air presses, drill fixtures, clamping fixtures, cylinders, valves, or light assembly equipment. Models 101, 101LS, 102, 102LS, and 103 have compact and completely self-contained controls, recessed actuation buttons built in the ends and a universal mount for convenient positioning. Unit has 1/4" tube push-in fitting included.

Part No. 0423219 0423220

Vendor No. M4H210-06 M4H310-08

Type 5 Ports/2 Position/Detented 5 Ports/2 Position/Detented

Port Size 1/8" NPT 1/4" NPT

Flow Rate Cv .78 Cv 1.39

Price /Ea $24.04 34.12

Foot Valves M4F foot valve has a plastic guard with in/out port access through the rear of the unit. Exhaust mufflers are included.Unit has 1/4" NPT port size.

Note: Operating pressure range is 70-120 PSI. Part No. 0423201

Vendor No. CSV-101

Description Steel Anti-Tiedown Two-Hand Machine Control System

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price /Ea $519.02

Part No. 0423221

Vendor No. M4F210-08-G

0423222

M4F210-08-LG

Description Aluminum 5-Port/2-Position Foot Valve Aluminum 5-Port/2-Position Foot Valve with locking foot pedal

Price /Ea $42.10 47.60

10-51 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Pneumatic Valves & Accessories

PNEUMATIC VALVES

10_pHyd_43-96.qxd

3/11/07

2:16 PM

Page 52

PNEUMATIC VALVES 2 & 3 Port Mechanical Valves

Pneumatic Valves Cont. Pneumatic Valves & Accessories

UM100 Series • Simple applications and installation • Die cast aluminum construction • 1/8 NPT Port Size • 2 and 3 port versions available • Side ported • Includes valve and actuator

Rotary Hand Lever Valves M4HV rotary hand valve can be either panel or base mounted. Panel mounting nut supplied. Part No. 0423215 0423216

Vendor No. M4HV310-08-S M4HV330-08-S

0423217 0423218

M4HV410-15-S M4HV430-15-S

Type 4 Ports/2 Position 4 Ports/3 Position/Closed Center 4 Ports/2 Position 4 Ports/3 Position/Closed Center

Port Size 1/4" NPT 1/4" NPT

Flow Rate Cv .89 Cv .89

Price /Ea $24.54 24.54

1/2" NPT 1/2" NPT

Cv 5.29 Cv 5.29

30.55 30.55

Rotary Hand Valves • Compact • Low operating force • Panel mounting available • Die cast aluminum construction Part No. 0422756 0422759 0422762 0422757 0422760 0422763 0422758 0422761 0422764

Vendor No. VH200-N02 VH300-N03 VH400-N04 VH201-N02 VH301-N03 VH401-N04 VH202-N02 VH302-N03 VH402-N04

Port Size 1/4 NPT 3/8 NPT 1/2 NPT 1/4 NPT 3/8 NPT 1/2 NPT 1/4 NPT 3/8 NPT 1/2 NPT

Description 3 position closed center rotary 3 position closed center rotary 3 position closed center rotary 3 position exhaust center rotary 3 position exhaust center rotary 3 position exhaust center rotary 2 position detent rotary 2 position detent rotary 2 position detent rotary

Price /Ea $57.48 67.31 89.01 59.46 73.17 98.84 57.48 67.31 89.01

Check Valves

Vendor No. NAK2000-N01 NAK2000-N02 NAK4000-N03 NAK4000-N04 NAK6000-N06

Port Size 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT

Body Dia. 1/4 1/4 1/2 1/2 1

Price /Ea $18.92 18.92 24.77 24.77 51.48

• Conforms to OHSA standards • Key hole for lock-out • Large knob for easy operation

Vendor No. VHS20-N01-Z VHS20-N02-Z VHS30-N03-Z VHS40-N04-Z VHS50-N06-Z VHS50-N10-Z

Port Size

NVM120-N01-00 NVM120-N01-08 NVM120-N01-30B

1/8 NPT 1/8 NPT 1/8 NPT

0422768

NVM120-N01-30R

1/8 NPT

0422769

NVM120-N01-30G

1/8 NPT

0422770 0422771 0422772 3 Port 0422773 0422774

NVM120-N01-34B NVM120-N01-34R NVM120-N01-34G

1/8 NPT 1/8 NPT 1/8 NPT

NVM130-N01-00 NVM130-N01-05

1/8 NPT 1/8 NPT

0422775 0422776 0422777 0422778

NVM130-N01-06 NVM130-N01-07 NVM130-N01-08 NVM130-N01-30B

1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT

0422779

NVM130-N01-30R

1/8 NPT

0422780

NVM130-N01-30G

1/8 NPT

0422781 0422782 0422783 0422784

NVM130-N01-34B NVM130-N01-34R NVM130-N01-34G NVM130-N01-36

1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT

Type

Style

Price /Ea

2-port basic actuator Mechanical $11.03 2-port toggle lever Manual 24.89 2-port mushroom push button Manual 26.58 (black) 2-port mushroom push button Manual 26.58 (red) 2-port mushroom push button Manual 26.58 (green) 2-port twist selector(black) Manual 25.52 2-port twist selector(red) Manual 25.52 2-port twist selector(green) Manual 25.52 3-port basic actuator 3-port straight plunger

Mechanical Mechanical

11.95 22.34

3-port roller plunger Mechanical 3-port cross roller plunger Mechanical 3-port toggle lever Manual 3-port mushroom push button Manual (black) 3-port mushroom push button Manual (red) 3-port mushroom push button Manual (green) 3-port twist selector(black) Manual 3-port twist selector(red) Manual 3-port twist selector(green) Manual 3-port key selector Manual

24.60 24.60 25.81 27.50 27.50 27.50 26.44 26.44 26.44 47.65

VZM400 Series Base Valve • Metal seal • Compact design • Large flow capacity • 1/8 NPT main valve port • High cycle rate, long life • Uses same actuation designators as the 2 & 3 Port mechanical Valves Part No. 0422799

Vendor No. NVZM450-N01-00

Type Basic Actuator

Price /Ea $53.10

Optional/Replacement Actuators • Easy assembly to base valve • For use with VZM400 series base valve

Residual Pressure Release 3-Port Valves

Part No. 0422003 0422004 0422005 0422006 0422007 0422008

Vendor No.

5 Port Mechanical Valves

Series AK • High flow capacity • Low cracking pressure: .02 MPa • Compact & light weight

Part No. 0422975 0422976 0422977 0422978 0422979

Part No. 2 Port 0422765 0422766 0422767

Thread Size 1/8" NPT 1/4" NPT 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT

10-52 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Ea $37.84 37.84 40.70 55.28 96.80 96.80

Part No. 0422800 0422801

Vendor No. VM-01CS VM-02CS

0422802 0422803 0422804 0422805 0422806 0422807 0422808 0422809 0422810 0422811

VM-05C VM-06CS VM-08C VM-30CB VM-30CR VM-30CG VM-34CB VM-34CR VM-34CG VM-36C

Type Hard steel roller lever Hard steel one-way roller lever Straight plunger Hard steel roller plunger Toggle lever Push button, black, (mushroom) Push button, red, (mushroom) Push button, green, (mushroom) Twist selector, black Twist selector, red Twist selector, green Key selector

Style Mechanical Mechanical

Price /Ea $6.79 11.03

Mechanical Mechanical Manual Manual Manual Manual Manual Manual Manual Manual

15.06 21.14 12.80 13.72 13.72 13.72 14.21 14.21 14.21 36.55

10_pHyd_43-96.qxd

3/11/07

2:16 PM

Page 53

PNEUMATIC VALVES Pneumatic Valves Cont.

• Easy assembly to valve • For use with SY3000 valves

2 & 3 Port Mechanical Valves VM200 Series Base Valves • Large flow capacity • 1/4 NPT port • Use with air on inert gas • 2 and 3 port versions available Part No. 0422785 0422786

Vendor No. NVM220-N02-00 NVM230-N02-00

Part No. 0422828

Vendor No. SY3000-27-1T

Type 2-port basic actuator 3-port basic actuator

Price /Ea $20.43 21.21

• Easy assembly to base valves • Use with VM200 base valves

Vendor No. VM-01AS VM-02AS

0422789

VM-05A

Type Hard steel roller lever Hard steel one-way roller lever Straight plunger

0422790 0422791 0422792 0422793 0422794 0422795 0422796 0422797 0422798

VM-06AS VM-08A VM-30AB VM-30AR VM-30AG VM-34AB VM-34AR VM-34AG VM-36A

Hard steel roller plunger Toggle lever Push button, black, (mushroom) Push button, red, (mushroom) Push button, green, (mushroom) Twist selector, black (2 position) Twist selector, red (2 position) Twist selector, green (2 position) Key selector (2 position)

Price /Ea $6.86 8.77

Style Mechanical Mechanical Mechanical

13.08

Mechanical Manual Manual Manual Manual Manual Manual Manual Manual

16.83 19.23 15.55 15.55 15.55 14.49 14.49 14.49 35.70

24V Direct Current Body Ported Solenoid Valve

Part No. 0422829 0422830 0422831 0422832 0422833 0422834 0422835 0422836

Vendor No. SS5Y3-41-02-N3T SS5Y3-41-04-N3T SS5Y3-41-06-N3T SS5Y3-41-08-N3T SS5Y3-41-02-N7T SS5Y3-41-04-N7T SS5Y3-41-06-N7T SS5Y3-41-08-N7T

Port 5/32" Fitting 1/4" Fitting 1/4" Fitting 5/16" Fitting 5/16" Fitting 3/8" Fitting

Flow Rate 0.23 CV 0.23CV 0.59CV 0.59CV 0.9CV 0.9CV

Price /Ea $69.16 69.16 75.13 75.13 84.79 84.79

SY3000 Series • 300mm Leads • Long life to 50 million cycles • High speed coil response times • Low power consumption • Space saving design • 0.3 CV flow rate • 10/32, 5/32, and 1/8 port sizes Outlet

Outlet Port Size 5/32 5/32 5/32 5/32 1/4 1/4 1/4 1/4

Price /Ea $40.92 59.21 77.49 95.78 40.92 59.21 77.49 95.78

Provides future expansion opportunities to existing manifold.

Vendor No. SY3000-26-9A

Description For SY3000 series manifold

Price /Ea $3.10

Pilot Valve

Vendor No. SY3120-5LZ-N3-F1 SY3120-5LZ-N7-F1 SY5120-5LZ-N7-F1 SY5120-5LZ-N9-F1 SY7120-5LZ-N9-F1 SY7120-5LZ-N11-F1

Vendor No. SY3140-5LZ SY3240-5LZ SY3340-5LZ SY3440-5LZ SY3540-5LZ SY3140-6LZ SY3240-6LZ SY3340-6LZ SY3440-6LZ SY3540-6LZ

No. of Outlets 2 4 6 8 2 4 6 8

Blank Station Kit

• Space saving design • Low power consumption • High speed coil response times • Long life to 50 million cycles

Part No. 0422838

Vendor No. V111-5LOU

Base Mount Valves

Part No. 0422818 0422819 0422820 0422821 0422822 0422823 0422824 0422825 0422826 0422827

Price /Ea $11.80

• Compact bar stock type • Quick disconnect fittings • 1/8" Inlet • Die cast aluminum • For use with SY3000

Part No. 0422837

• High flow • Compact design • Built-in one touch fitting • Foot mount • 4 way, 5 port • 22-100 PSI Part No. 0422812 0422813 0422814 0422815 0422816 0422817

Port 1/8 NPT

Valve Manifold

Optional/Replacement Actuators

Part No. 0422787 0422788

Description Single Station Subplate

Work Pressure (PSI) 22-100 PSI 15-100 PSI 30-100 PSI 30-100 PSI 30-100 PSI 22-100PSI 15-100 PSI 30-100 PSI 30-100 PSI 30-100 PSI

Description 24VDC w/o leads pilot valve for SY valve series

Price /Ea $26.54

Interface Regulator Kit Provides ability to regulate pressure at individual valve station.

Type 2 position Single Solenoid 2 position Double Solenoid 3 position, open center 3 position, closed center 3 position, pressure center 2 position Single Solenoid 2 position Double Solenoid 3 position closed center 3 position open center 3 position pressure center

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price /Ea $60.75 90.17 103.96 103.96 103.96 60.75 90.17 103.96 103.96 103.96

Part No. 0422839

Vendor No. ARBY3000-05-P-2

Description For SY3000 series manifold

Price /Ea $43.43

10-53 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Pneumatic Valves & Accessories

Base Mount Valve Subplate

10_pHyd_43-96.qxd

3/11/07

2:16 PM

Page 54

PNEUMATIC VALVES Pneumatic Valves Cont.

Interface Regulator Kit

Pneumatic Valves & Accessories

SY5000 Series Provides ability to regulate pressure at individual valve station.

Base Mount Valves SY5000 Series • 300mm Leads • Long life to 50 million cycles • High speed coil response times • Low power consumption • Space saving design • 1/8, 1/4, and 5/16 port sizes Part No. 0422840 0422841 0422842 0422843 0422844 0422845 0422846 0422847 0422848 0422849

Vendor No. SY5140-5LZ SY5240-5LZ SY5340-5LZ SY5440-5LZ SY5540-5LZ SY5140-6LZ SY5240-6LZ SY5340-6LZ SY5440-6LZ SY5540-6LZ

Voltage 24VDC 24VDC 24VDC 24VDC 24VDC 12VDC 12VDC 12VDC 12VDC 12VDC

Part No. 0422860

Vendor No. ARBY5000-00-P-2

Description For SY5000 series manifold

Price /Ea $92.97

Description For SY7000 series manifold

Price /Ea $109.78

Interface Regulator Kit Provides ability to regulate pressure at individual valve station. Type 2-pos. single 2-pos. double 3-pos.closed center 3-pos. open center 3-pos. pressure center 2-pos. single 2-pos. double 3-pos.closed center 3-pos. open center 3-pos. pressure center

Working Pressure (PSI)

Price /Ea $65.40 92.60 107.65 107.65 107.65 65.40 92.60 107.65 107.65 107.65

Part No. 0422877

Blank Station Kit Provides future expansion opportunities.

Part No. 0422878

Base Mount Valve Subplate

Vendor No. ARBY7000-00-P-2

Vendor No. SY7000-26-22A

Description For SY7000 series manifold

Price /Ea $5.31

SY5000 Series

Base Mount Valves

Easy assembly to valve.

Part No. 0422859

Vendor No. SY5000-27-1T

Description For SY5000 series

Size 1/8" NPT base mount valve subplate for SY5000 series

Price /Ea $12.90

Valve Manifold SY5000 Series • Compact bar stock, quick disconnect fittings • 1/4 NPTF Inlet • For use with SY5000

Part No. 0422850 0422851 0422852 0422853 0422854 0422855 0422856 0422857

Vendor No. SS5Y5-41-02-N7T SS5Y5-41-04-N7T SS5Y5-41-06-N7T SS5Y5-41-08-N7T SS5Y5-41-02-N9T SS5Y5-41-04-N9T SS5Y5-41-06-N9T SS5Y5-41-08-N9T

No. of Stations 2 4 6 8 2 4 6 8

Outlet Port Size 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16

Price /Ea $50.43 71.96 93.49 115.02 50.43 71.96 93.49 115.02

Blank Station Kit

SY7000 Series • Space saving design • Low power consumption • High speed coil response times • Long life to 50 million cycles • 1/4, 5/16, and 3/8 port sizes Part No. 0422861 0422862 0422863 0422864 0422865 0422866 0422867 0422868 0422869 0422870

Provides future expansion opportunities.

Voltage 24VDC 24VDC 24VDC 24VDC 24VDC 12VDC 12VDC 12VDC 12VDC 12VDC

Description 2-pos. single 2-pos. double 3-pos.closed center 3-pos. open center 3-pos. pressure center 2-pos. single 2-pos. double 3-pos.closed center 3-pos. open center 3-pos. pressure center

Working Pressure (PSI)

Price /Ea $73.73 101.75 117.23 117.23 117.23 73.73 101.75 117.23 117.23 117.23

Base Mount Valve Subplate • Easy assembly to valve • For use with SY7000 Series

Part No. 0422871 0422872

SY5000 Series

Vendor No. SY7140-5LZ SY7240-5LZ SY7340-5LZ SY7440-5LZ SY7540-5LZ SY7140-6LZ SY7240-6LZ SY7340-6LZ SY7440-6LZ SY7540-6LZ

Vendor No. SY7000-27-1T SY7000-27-2T

Description For SY7000 series For SY7000 series

Size 1/8" NPT 1/4" NPT

Price /Ea $14.01 14.01

Valve Manifold Part No. 0422858

Vendor No. SY5000-26-20A

Description For SY5000 series manifold

10-54 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Ea $5.38

• Compact bar stock • Quick disconnect fittings • 3/8" tube fitting outlets • For use with SY7000 Series

Part No.

Vendor No.

No. of Outlets

Inlet

0422873 0422874 0422875 0422876

SS5Y7-42-02-N11T SS5Y7-42-04-N11T SS5Y7-42-06-N11T SS5Y7-42-08-N11T

2 4 6 8

1/4" NPTF 1/4" NPTF 1/4" NPTF 3/8" NPTF

Price /Ea $60.90 85.97 111.04 136.11

10_pHyd_43-96.qxd

3/11/07

2:17 PM

Page 55

PNEUMATIC VALVES AND CYLINDERS Sizing based on 80 PSI air source and up to 200 PSI Delta P (pressure through valve)

RuB Pneumatic and Electric Actuation Assemblies Double Acting Pneumatic Actuator and Solenoid Valve Full line of 1/2"-2 brass ball valves direct mount to either Rub pneumatic or electric actuators. No Need for costly and space consuming bracketing/bridging. Rack and pinion pneumatic actuators in either double acting or spring (to open or close) models plus ball valves and solenoid valve to make complete assembly. RuB electric actuators in 150 and 300 in/lb models to fit 1/2"-2" ball valves. 50% duty rating and 180 degrees travel capacity.

• Full port pneumatically actuated ball valve, double acting • Maximum 600 ps (WOG) • Brass ball with SS trim for max life • VT actuator has anodized aluminum body • Solenoid valve 120VAC standard • Direct mount for space saving operation

Part No. 0453740

Vendor No. S64DDS

0453741

S64EDA

0453742

S64FDA

0453743

S64GDA

0453744

S64HDA

0453745

S64IDA

Description Price 1/2" Brs Ball Valve-Pneumatic $289.00 Actuator-Dbl Actg Solenoid Vlv 3/4" Brs Ball Valve-Pneumatic 337.00 Actuator-Dbl Actg Solenoid Vlv 1" Brs Ball Valve-Pneumatic 359.00 Actuator-Dbl Actg Solenoid Vlv 1-1/4" Brs Ball Valve-Pneum 479.00 Actuator-Dbl Actg Solenoid Vlv 1-1/2" Brs Ball Valve- Pneum 469.00 Actuator-Dbl Actg Solenoid Vlv 2" Brs Ball Valve-Pneumatic 515.00 Actuator-Dbl Actg Solenoid Vlv

Components in assembly • S64 (39) full port • 600 WOG • Brass ball valve with ISO 5211 mounting pad for direct mount to actuator • SS ball and stem for added life • Anodized aluminum VT actuator (spring return to close valve 90 degrees (open/close) when air applied to 1/4" NPT air connection • AD-1 Solenoid valve (air director) used NEMA 4X mounting connection, 120 VAC, 60 Hz connection Valve connection Fip x Fip, Valve Temperature range -4°F to +350°F If AD-1 solenoid valve not needed in assembly, contact your Fastenal representative

• Full port pneumatically actuated ball valve, actuator, solenoid valve, and attachment screws • Maximum 600 psi (WOG) • Brass ball valve with SS trim for max life • VT actuator (w/springs) has anodized aluminum body • Solenoid valve 120 VAC standard • Direct mount for space saving application Part No. 0453746

Vendor No. S64DSR

0453747

S64ESR

0453748

S64FSR

0453749

S64GSR

0453750

S641SR

0453751

S64ISR

Description Price 1/2" Brs Ball Valve-Pneumatic $355.00 Actuator-Spr Rtrn Solenoid Vlv 3/4" Brs Ball Valve-Pneumatic 369.00 Actuator-Spr Rtrn Solenoid Vlv 1" Brs Ball Valve-Pneumatic 455.00 Actuator-Spr Rtrn Solenoid Vlv 1-1/4" Brs Ball Valve-Pneum 515.00 Actuator-Spr Rtrn Solenoid Vlv 1-1/2" Brs Ball Valve- Pneumatic Actuator -Spr Rtrn Volenoid Vlv 2" Brs Ball Valve-Pneumatic 689.00 Actuator-Spr Rtrn Solenoid Vlv

Pneumatic Cylinders

Round Body Double Acting Pneumatic Cylinders • Non-repairable designed to last • Permanent lube(requires no additional lubrication) • Stainless steel tube • Long lasting corrosion protection • Auto switch capable • Cushioned piston Vendor Part No. No. Front Nose Mount 0422083 NCDMB075-0100C 0422084 NCDMB075-0200C 0422085 NCDMB075-0300C 0422086 NCDMB075-0400C 0422087 NCDMB075-0500C 0422088 NCDMB075-0600C 0422089 NCDMB106-0100C 0422090 NCDMB106-0200C 0422091 NCDMB106-0300C 0422092 NCDMB106-0400C 0422093 NCDMB106-0500C 0422094 NCDMB106-0600C 0422095 NCDMB125-0100C 0422096 NCDMB125-0200C 0422097 NCDMB125-0300C

Bore Size

Stroke Lgth.

Price /Ea

3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/4" 1-1/4" 1-1/4"

1" 2" 3" 4" 5" 6" 1" 2" 3" 4" 5" 6" 1" 2" 3"

32.94 34.70 36.45 38.21 39.96 41.72 36.86 38.61 40.37 42.12 43.88 45.63 48.06 50.36 52.65

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Electric Actuator Heavy-duty electric actuators direct mounted to S64 (39) brass ball valves

Components in assembly • S64 (39) full port • 600 WOG • Brass ball valve with ISO 5211 mounting pad for direct mount to actuator • SS ball and stem for added life • ET electric actuators have a 120 VAC, 60 Hz reversing motor in a NEMA 4 enclosure • ISO 5211 mounting pad for compact direct mount capability • ET actuators have a rugged corrosionresistant construction with aluminum housing and Grade 316 Stainless Steel shaft and fasteners • Also has manual override capability Valve connection Fip x Fip, Valve Temperature range 4°F to +350°F

• Full port electric actuated ball valve (assembly includes brass ball valve, electric actuator, assembly screws) • Maximum 600 psi (WOG) • Brass ball valve with SS trim for maximum life • ET actuator has 50% duty cycle, aluminum housing • ET 120 VAC standard,manual override capability • ISO 53211 direct mount for space saving performance Part No. 0453752

Vendor No. S64DET

0453753

S64EET

0453754

S64FET

0453755

S64GET

0453756

S64HET

0453757

S64IET

Vendor Part No. No. Front Nose Mount Cont. 0422098 NCDMB125-0400C 0422099 NCDMB125-0500C 0422100 NCDMB125-0600C 0422101 NCDMB150-0100C 0422102 NCDMB150-0200C 0422103 NCDMB150-0300C 0422104 NCDMB150-0400C 0422105 NCDMB150-0500C 0422106 NCDMB150-0600C 0422107 NCDMB200-0100C 0422108 NCDMB200-0200C 0422109 NCDMB200-0300C 0422110 NCDMB200-0400C 0422111 NCDMB200-0500C 0422112 NCDMB200-0600C Rear Pivot Mount 0422113 NCDMC075-0100C 0422114 NCDMC075-0200C 0422115 NCDMC075-0300C 0422116 NCDMC075-0400C 0422117 NCDMC075-0500C 0422118 NCDMC075-0600C 0422119 NCDMC106-0100C 0422120 NCDMC106-0200C 0422121 NCDMC106-0300C 0422122 NCDMC106-0400C 0422123 NCDMC106-0500C

Description Price 1/2" Brass Ball Valve-SS Trim- $327.00 Electric Actuator-120 VAC 3/4" Brass Ball Valve-SS Trim- 349.00 Electric Actuator-120 VAC 1" Brass Ball Valve-SS Trim- 355.00 Electric Actuator-120 VAC 1-1/4" Brass Ball Valve-SS 499.00 Trim-Electric Actuator-120 VAC 1-1/2" Brass Ball Valve-SS 535.00 Trim-Electric Actuator-120 VAC 2" Brass Ball Valve-SS Trim- 579.00 Electric Actuator-120 VAC

Bore Size

Stroke Lgth.

Price /Ea

1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 2" 2" 2" 2" 2" 2"

4" 5" 6" 1" 2" 3" 4" 5" 6" 1" 2" 3" 4" 5" 6"

54.95 57.24 59.54 56.57 59.40 62.24 65.07 67.91 70.74 74.18 77.15 80.12 83.09 67.91 89.03

3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16"

1" 2" 3" 4" 5" 6" 1" 2" 3" 4" 5"

37.13 38.88 40.64 42.39 44.15 45.90 41.45 43.20 44.96 46.71 48.47

10-55 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Pneumatic Valves & Accessories

Spring Return Pneumatic Actuator and Solenoid Valve

Pneumatic Valves Cont.

10_pHyd_43-96.qxd

3/11/07

2:17 PM

Page 56

PNEUMATIC CYLINDERS Pneumatic Cylinders Cont. Pneumatic Valves & Accessories

Vendor Part No. No. Rear Pivot Mount Cont. 0422124 NCDMC106-0600C 0422125 NCDMC125-0100C 0422126 NCDMC125-0200C 0422127 NCDMC125-0300C 0422128 NCDMC125-0400C 0422129 NCDMC125-0500C 0422130 NCDMC125-0600C 0422131 NCDMC150-0100C 0422132 NCDMC150-0200C 0422133 NCDMC150-0300C 0422134 NCDMC150-0400C 0422135 NCDMC150-0500C 0422136 NCDMC150-0600C

Repairable Round Body Cylinders

Bore Size

Stroke Lgth.

Price /Ea

1-1/16" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2"

6" 1" 2" 3" 4" 5" 6" 1" 2" 3" 4" 5" 6"

$50.22 53.06 55.35 57.65 59.94 62.24 64.53 62.57 65.41 68.24 71.08 73.91 76.75

Spring Acting Spring Return Cylinders • Non-repairable designed to last • Permanent lube(requires no additional lubrication) • Stainless steel tube • Long lasting corrosion protection • Auto switch capable Vendor Part No. No. Front Nose Mount 0422137 NCDMB075-0100S 0422138 NCDMB075-0200S 0422139 NCDMB075-0300S 0422140 NCDMB106-0100S 0422141 NCDMB106-0200S 0422142 NCDMB106-0300S 0422143 NCDMB125-0200S 0422144 NCDMB150-0100S 0422145 NCDMB150-0200S 0422146 NCDMB150-0300S Rear Pivot Mount 0422147 NCDMC075-0100S 0422148 NCDMC075-0200S 0422149 NCDMC106-0100S 0422150 NCDMC106-0200S 0422151 NCDMC125-0200S 0422152 NCDMC150-0200S

Bore Size

Stroke Lgth.

Price /Ea

3/4" 3/4" 3/4" 1-1/16" 1-1/16" 1-1/16" 1-1/4" 1-1/2" 1-1/2" 1-1/2"

1" 2" 3" 1" 2" 3" 2" 1" 2" 3"

$27.81 30.51 33.21 30.85 34.16 37.46 46.71 49.55 54.54 59.94

3/4" 3/4" 1-1/16" 1-1/16" 1-1/4" 1-1/2"

1" 2" 1" 2" 2" 2"

$32.13 34.83 35.24 38.54 51.50 60.28

NCG Series • High speed operation to 40in/sec • Basic mount • Engineered piston assembly • Removable rod cover allows easy seal replacement • Can be integrated with linear guides Part No. 0422153 0422154 0422155 0422156 0422157 0422158 0422159 0422160 0422161 0422162 0422163 0422164 0422165 0422166 0422167 0422168 0422169 0422170 0422171

Vendor No. NCDGBN25-0100 NCDGBN25-0150 NCDGBN25-0200 NCDGBN25-0250 NCDGBN25-0300 NCDGBN25-0400 NCDGBN25-0500 NCDGBN25-0600 NCDGBN40-0100 NCDGBN40-0150 NCDGBN40-0200 NCDGBN40-0250 NCDGBN40-0300 NCDGBN40-0400 NCDGBN40-0500 NCDGBN40-0600 NCDGBN50-0100 NCDGBN50-0150 NCDGBN50-0200

Bore Size 1" 1" 1" 1" 1" 1" 1" 1" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 2" 2" 2"

Stroke Lgth. 1" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" 1" 1-1/2" 2" 2-1/2" 3" 4" 5" 6" 1" 1-1/2" 2"

Price /Ea $46.71 48.67 48.67 50.63 50.63 52.58 54.54 56.50 68.58 71.21 71.21 73.85 73.85 76.48 79.11 81.74 89.71 93.08 93.08

0422172 0422173 0422174 0422175 0422176 0422177 0422178 0422179 0422180 0422181 0422182 0422183 0422184

NCDGBN50-0250 NCDGBN50-0300 NCDGBN50-0400 NCDGBN50-0500 NCDGBN50-0600 NCDGBN63-0100 NCDGBN63-0150 NCDGBN63-0200 NCDGBN63-0250 NCDGBN63-0300 NCDGBN63-0400 NCDGBN63-0500 NCDGBN63-0600

2" 2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2"

2-1/2" 3" 4" 5" 6" 1" 1-1/2" 2" 2-1/2" 3" 4" 5" 6"

96.46 96.46 99.83 103.21 106.58 114.95 118.73 118.73 122.51 122.51 126.29 130.07 133.85

Foot Mounting Kits Foot mounting brackets for NCG Series Cylinders.

Part No. 0422185 0422186 0422187 0422188

10-56 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Vendor No. NCG-L025 NCG-L040 NCG-L050 NCG-L063

Description NCG25 Foot mounting kit NCG40 Foot mounting kit NCG50 Foot mounting kit NCG63 Foot mounting kit

Bore Size 25 mm 40 mm 50 mm 63 mm

Price /Ea $4.40 5.32 5.78 10.83

10_pHyd_43-96.qxd

3/11/07

2:18 PM

Page 57

PNEUMATIC CYLINDERS & MUFFLERS Pneumatic Cylinders Cont.

• Quick and easy assembly • For use with NCAI Series Cylinders

NFPA Interchangeable Cylinders NCAI Series • Compact and lightweight rolled piston threads • Increased kinetic energy absorption • Rugged square covers • Switch capable • Tie-Rod Style • Basic Mount Part No. 0422189 0422190 0422191 0422192 0422193 0422194 0422195 0422196 0422197 0422198 0422199 0422200 0422201 0422202

Vendor No. NCDA1B150-0100 NCDA1B150-0200 NCDA1B150-0300 NCDA1B150-0400 NCDA1B150-0500 NCDA1B200-0100 NCDA1B200-0200 NCDA1B200-0300 NCDA1B200-0400 NCDA1B200-0500 NCDA1B250-0100 NCDA1B250-0200 NCDA1B250-0300 NCDA1B250-0400

Bore Size 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 2" 2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2" 2-1/2"

Stroke Lgth. 1 2 3 4 5 1 2 3 4 5 1 2 3 4

Price /Ea $117.13 120.45 123.76 127.08 130.39 128.83 132.47 136.11 139.75 143.39 140.53 144.50 148.46 152.43

0422203 0422204 0422205 0422206 0422207 0422208 0422209 0422210 0422211 0422212 0422213

NCDA1B250-0500 NCDA1B325-0100 NCDA1B325-0200 NCDA1B325-0300 NCDA1B325-0400 NCDA1B325-0500 NCDA1B400-0100 NCDA1B400-0200 NCDA1B400-0300 NCDA1B400-0400 NCDA1B400-0500

2-1/2" 3-1/4" 3-1/4" 3-1/4" 3-1/4" 3-1/4" 4" 4" 4" 4" 4"

5 1 2 3 4 5 1 2 3 4 5

156.39 228.35 233.48 238.62 243.75 248.89 253.37 259.48 265.59 271.70 277.81

Vendor Part No. No. Bore Size 0422214 NCA1-C200 2"

Style Single Detachable

0422218 NCA1-D200

2"

Double Detachable

0422222 NCA1-F200

2"

Front Flange

0422215 NCA1-C250

2-1/2"

Single Detachable

0422219 NCA1-D250

2-1/2"

Double Detachable

0422223 NCA1-F250

2-1/2"

Front Flange

0422216 NCA1-C325

3-1/4"

Single Detachable

0422220 NCA1-D325

3-1/4"

Double Detachable

0422224 NCA1-F325

3-1/4"

Front Flange

0422217 NCA1-C400

4"

Single Detachable

0422221 NCA1-D400

4"

Double Detachable

0422225 NCA1-F400

4"

Front Flange

Price Description /Ea 2" Single detachable Rear $11.83 Clevis Mounting Kit (MP4) 2" Double detachable Rear 11.83 Clevis Mounting Kit (MP2) 2" Front Flange Mounting Kit 12.87 (MF1) 2.5" Single detachable Rear 12.55 Clevis Mounting Kit (MP4) 2.5" Double detachable Rear 12.55 Clevis Mounting Kit (MP2) 2.5" Front Flange Mounting Kit (MF1) 3.25" Single detachable Rear Clevis Mounting Kit (MP4) 3.25" Double detachable Rear Clevis Mounting Kit (MP2) 3.25" Front Flange Mounting Kit (MF1) 4" Single detachable Rear Clevis Mounting Kit (MP4) 4" Double detachable Rear Clevis Mounting Kit (MP2) 4" Front Flange Mounting Kit (MF1)

16.45 22.10 22.10 26.39 25.68 25.68 32.76

Mufflers and Vents

Silencer/Exhaust Mufflers High decibel reduction.

Through Hole Mount Compact Cylinders NC DQ 8 Series • Compact design for close center to center mounting • Extruded aluminum body • Hard anodized • Auto switch capable Part No. 0422226 0422227 0422228 0422229 0422230 0422231 0422232 0422233 0422234 0422235 0422236 0422237 0422238 0422239 0422240 0422241 0422242 0422243 0422244 0422245 0422246 0422247 0422248 0422249 0422250 0422251 0422252 0422253 0422254

Vendor No. NCQ8B056-012 NCDQ8B056-025 NCDQ8B056-050 NCDQ8B056-075 NCDQ8B056-100 NCDQ8B056-150 NCDQ8B056-200 NCDQ8B056-250 NCDQ8B056-300 NCDQ8B056-350 NCDQ8B056-400 NCDQ8B075-025 NCDQ8B075-050 NCDQ8B075-100 NCDQ8B075-200 NCDQ8B075-300 NCDQ8B075-400 NCDQ8B150-100 NCDQ8B150-200 NCDQ8B150-300 NCDQ8B150-400 NCDQ8B200-100 NCDQ8B200-200 NCDQ8B200-300 NCDQ8B200-400 NCDQ8B250-100 NCDQ8B250-200 NCDQ8B250-300 NCDQ8B250-400

Bore Size 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2" 2-1/2"

Stroke Lgth. 1/8" 1/4" 1/2" 3/4" 1" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1/4" 1/2" 1" 2" 3" 4" 1" 2" 3" 4" 1" 2" 3" 4" 1" 2" 3" 4"

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price /Ea $41.28 47.91 48.43 48.95 49.47 50.51 51.55 52.59 53.63 54.67 55.71 49.27 49.79 50.83 52.91 54.99 57.07 79.04 83.20 87.36 91.52 97.37 103.61 109.85 116.09 127.08 134.88 142.68 150.48

Vendor No. NAN200-N02 NAN300-N03 AN400-N04 NAN500-N06 NAN600-N10

Part No. 0422076 0422077 0422078 0422079 0422080

Thread Size 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT

Price /Ea $5.49 5.92 6.44 19.96 24.25

Sintered Metal Silencer/Exhaust Mufflers High decibel reduction.

Vendor No. AN120-M5 NAN110-N01

Part No. 0422081 0422082

Thread Size M5 1/8 NPT

Price /Ea $3.29 5.46

Sintered Mufflers Size 10/32 1/8 1/4 3/8 1/2 3/4 1 1-1/4

Length 45/64 1-1/8 1-3/8 1-1/2 1-7/8 2-1/4 2-7/8 3-1/4

Hex 5/16 7/16 9/16 11/16 7/8 1-1/16 1-5/16 1-11/16

Part No. 0469590 0469591 0469592 0469593 0469594 0469595 0469596 0469597

Price /Each $2.39 2.95 2.99 4.49 6.29 9.75 14.75 23.75

10-57 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Pneumatic Valves & Accessories

NCA1 Mounting Kits

10_pHyd_43-96.qxd

3/11/07

2:18 PM

Page 58

MUFFLERS, VENTS, MANIFOLDS & TUBING Mufflers and Vents Cont. Pneumatic Valves & Accessories

Speed Control Mufflers Size 1/8 1/8 1/4 1/4 3/8 3/8 1/2 1/2 3/4 1

Length 1-5/16 1-9/16 1-9/16 1-5/8 1-5/8 2 2 2-3/8 2-3/8 2-1/2

Hex 1/2 9/16 9/16 11/16 11/16 7/8 7/8 1-1/16 1-1/16 1-5/16

Part No. 0469607 0469608 0469609 0469610 0469611 0469612 0469613 0469614 0469615 0469616

Price /Each $5.94 6.95 6.95 7.45 7.79 10.95 10.75 17.97 17.97 24.95

Hex 7/16 9/16 11/16 7/8 1-1/16 1-5/16 1-11/16 2

Part No. 0469599 0469600 0469601 0469602 0469603 0469604 0469605 0469606

Price /Each $1.75 2.25 2.95 4.55 6.55 9.25 18.75 17.99

Breather Vents

Size 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2

Length 7/16 5/8 3/4 7/8 1 1-5/16 1-13/32 1-1/2

Aluminum Manifold Blocks • Made from Precision Extruded Aluminum • Black anodized finish

Part No. 0423000 0423002 0423004 0423006 0423008 0423009 0423011 0423013 0423015 0423017 0423018 0423020 0423022 0423024 0423026

Vendor No. PCM10-125-02B PCM10-125-04B PCM10-125-06B PCM10-125-08B PCM10-125-10B PCM20-250-02B PCM20-250-04B PCM20-250-06B PCM20-250-08B PCM20-250-10B PCM30-375-02B PCM30-375-04B PCM30-375-06B PCM30-375-08B PCM30-375-10B

Inlet 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 3/8" NPT 3/8" NPT 3/8" NPT 3/8" NPT 3/8" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT

Port Size 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 3/8" NPT 3/8" NPT 3/8" NPT 3/8" NPT 3/8" NPT

No. of Outlets 2 4 6 8 10 2 4 6 8 10 2 4 6 8 10

Price /Ea $15.85 17.25 22.25 24.65 27.47 17.98 21.20 23.98 26.88 28.94 26.92 29.99 32.99 44.46 46.49

Length 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet

Color Black Blue Red Green Black Blue Red Green Black Blue Red Green Black Blue

Price /Roll $16.50 16.50 16.50 16.50 18.25 18.25 18.25 18.25 29.25 29.25 29.25 29.25 61.75 61.75

Color Black Blue Black Blue Black Blue Black Blue

Price /Ea $12.05 12.05 21.80 21.80 33.80 33.80 71.35 71.35

Fractional Nylon Tubing • Dimensional stability • Low moisture absorption • Elastic memory • Wide temperature range • Many color options

Pneumatic Accessories

Rack and Pinion Rotary Acuators • Compact and lightweight • Auto switch capable • 90° or 180° rotation Part No. 0422750 0422751 0422752 0422753 0422754 0422755

Vendor No. NCDRA1BW30-90 NCDRA1BW30-180 NCDRA1BS63-90C NCDRA1BS63-180C NCDRA1BS80-90C NCDRA1BS80-180C

Bore Size 30mm 30mm 63mm 63mm 80mm 80mm

Description 90° rack and pinion rotary actuator 180° rack and pinion rotary actuator 90° rack and pinion rotary actuator 180° rack and pinion rotary actuator 90° rack and pinion rotary actuator 180° rack and pinion rotary actuator

Price /Ea $295.50 295.50 567.50 567.50 699.00 699.00

Part No. 0422900 0422901 0422902 0422903 0422904 0422905 0422906 0422907 0422908 0422909 0422910 0422911 0422912 0422913

Vendor No. TIA01B-33 TIA01BU-33 TIA01R-33 TIA01G-33 TIA05B-33 TIA05BU-33 TIA05R-33 TIA05G-33 TIA07B-33 TIA07BU-33 TIA07R-33 TIA07G-33 TIA11B-33 TIA11BU-33

Tube O.D. 1/8" 1/8" 1/8" 1/8" 3/16" 3/16" 3/16" 3/16" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8"

Metric Nylon Tubing • Dimensional stability • Low moisture absorption • Elastic memory • Wide temperature range • Many color options Part No. 0422931 0422932 0422933 0422934 0422935 0422936 0422937 0422938

10-58 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Vendor No. T0425B-20 T0425BU-20 T0604B-20 T0604BU-20 T0806B-20 T0806BU-20 T1209B-20 T1209BU-20

Tube O.D. 4mm 4mm 6mm 6mm 8mm 8mm 12mm 12mm

Length 20 meters 20 meters 20 meters 20 meters 20 meters 20 meters 20 meters 20 meters

10_pHyd_43-96.qxd

3/11/07

2:18 PM

Page 59

PNEUMATIC ACCESSORIES Pneumatic Accessories Cont.

• 10 ft. lead wire • Compact vacuum ejector with built in silencer • 1/4" to 1/2" fittings • 30-70 psi working pressure • 3.54 SCFM flow rate

Fractional Polyurethane Tubing • Cut resistant • Kink resistant • Extremely flexible • Good chemical resistance • Many colors available

Vendor No. ZL112-E25L ZL112-E65L

Part No. 0422964 0422965

Part No. 0422914 0422915 0422916 0422917 0422918 0422919 0422920 0422921 0422922 0422923 0422924 0422925 0422926 0422927 0422928

Vendor No. TIUB01B-33 TIUB01BU-33 TIUB01C-33 TIUB01R-33 TIUB01G-33 TIIUB07B-33 TIUB07BU-33 TIUB07C-33 TIUB07R-33 TIUB07G-33 TIUB11B-33 TIUB11BU-33 TIUB11C-33 TIUB11R-33 TIUB11G-33

Tube O.D. 1/8" 1/8" 1/8" 1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8"

Length 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet 100 feet

Color Black Blue Clear Red Green Black Blue Clear Red Green Black Blue Clear Red Green

Price /Ea $14.55 14.55 14.55 14.55 14.55 38.28 38.28 38.28 38.28 38.28 74.58 74.58 74.58 74.58 74.58

Air Suction Filter

0422929 0422930

TIUB13B-33 TIUB13BU-33

1/2" 1/2"

100 feet 100 feet

Black Blue

130.35 130.35

Single Acting Air Clamps

Tube Cutter • Long lasting and durable • Provides square cuts • Plier style Part No. 0422939

Price /Ea $493.76 504.99

Style NPN PNP

• Long life • Easy maintenance • Built-in quick connect fittings • Protects vacuum equipment from airborne contaminant's Vendor No. ZFB101-05 ZFB201-07 ZFB301-11

Part No. 0422972 0422973 0422974

Price /Ea $16.50 20.75 23.72

Size 3/16" in/out 1/4" in/out 3/8" in/out

Economical single-acting air clamps provide gripping power on the out stroke and spring retraction. They are ideal for use in drill fixtures and for bending, swaging, forming, crimping, and pressing operations. Because 3-way valves may be used, hook-ups are quick and easy. HIX12 is supplied with an adjustable front head so that the user may adjust the length of the stroke by as much as one inch.

Vendor No. TK-1

Description Tube cutter

Tube Size Up to 13mm (1/2")

Price /Ea $45.50

Multiple Tube Holders • Great for organizing and labeling tube leads • Black Polypropylene

H-1 is horizontal mount and V-1 is vertical mount Part No. 0423192 0423193 0423194

Vendor No. H-1 HIX12 V-1

Bore Size 1" 1" 1"

Stroke Lgth. 11/16" 1" to 2" adj 11/16"

Output 68 68 61

Price /Ea $26.57 62.59 26.57

Time Delay 75 to 6 sec.

Price /Ea $97.41

1 to 11 sec.

97.41

2-30 sec.

97.41

Note: Max. Output @ 100 PSI Part No. 0422940 0422941 0422942 0422943

Vendor No. TM-04 TM-06 TM-08 TM-12

No. of Openings 12 12 8 6

Tube O.D. 4mm 6mm 8mm 12mm

Price /Ea $2.73 2.73 2.73 5.45

Digital Pressure/Vacuum Switches • 2 meter lead wire with connector • Dual color red and green display • User frindly with controls • 1/8" NPT port Part No. 0422960 0422961 0422962 0422963

Vendor No. ISE30-T1-25-L ISE30-T1-65-L ZSE30-T1-25-L ZSE30-T1-65-L

Type Pressure Pressure Vacuum Vacuum

Style NPN PNP NPN PNP

Price /Ea $169.50 169.50 169.50 169.50

Vacuum Ejector

Vendor No. NZHI07BS-T01-T01 NZHI07DS-07-07-07 NZHI10BS-T01-T01 NZHI10DS-07-07-09 NZHI13BS-T01-T02 NZHI13DS-09-11-11

Type Box Type Body Ported Compact Body Ported Compact Body Ported

KLC air timers are adjustable and used to delay an air signal. Normally closed. Yellow dot on timer is input port. Port size 1/8" NPT. Time delay: KLC-105, 75 to 6 sec. KLC-110, 1 to 11 sec. KLC-230, 2 to 30 sec. Part No. 0423195

Vendor No. KLC-105

0423196

KLC-110

0423197

KLC-230

Description KLC-105 Acrylic Normally Closed Air Timer Delay Signal KLC-110 Acrylic Normally Closed Air Timer Delay Signal KLC-230 Acrylic Normally Closed Air Timer Delay Signal

Pneumatic Stroke Completion Sensors Stroke Completion Sensors (SCS) mount directly on cylinder ports to provide an air signal when rod motion stops...even when the full stroke length is not used. Stroke completion sensors automatically adjust to variable strokes, replacing limit and reed switches in clamping, holding, and sequencing tasks.

• Turns positive pressure into vacuum • Up to 26" Hg • Simple vacuum ejector • Compact and lightweight • Solid resin material Part No. 0422966 0422967 0422968 0422969 0422970 0422971

Air Timers

Nozzle Size .7 .7 1.0 1.0 1.3 1.3

Port Size 1/8-1/4 1/8-1/4 1/8-1/4 1/4 1/8-1/4 5/16-3/8

Flow Rate 0.71 SCFM 0.71 SCFM 1.20 SCFM 1.20 SCFM 2.48 SCFM 2.48 SCFM

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price /Ea $36.05 24.39 38.65 27.31 43.99 29.93

Sensors work by comparing supply pressure to exhaust pressure. Once the pressure drops on the exhaust side of the cylinder, the sensor will emit an air signal. Stroke completion sensors are not recommended for cylinder “inching" operations with pressure held valves. Part No. 0423198 0423199

Vendor No. SCS-250 SCS-375

Port Size 1/4" NPT 3/8" NPT

Tube O.D. 5/32 5/32

Pressure Range 60-120 PSI 60-120 PSI

Price /Ea $60.75 60.75

10-59 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Pneumatic Valves & Accessories

Multistage Vacuum Ejector with Built-In Exhaust Silencer

10_pHyd_43-96.qxd

3/11/07

2:19 PM

Page 60

DRY FACE GAUGES Pneumatic Accessories Cont.

2-1/2" Gauge

Pneumatic Valves & Accessories & Gauges

101D 1/4" Lower Mount • Black steel case with chrome bezel • Dry non-fillable • Brass connection and internals

Air to Electric Switch Air to electric switches convert air signals into electrical signals...ideal for actuating solenoid power valves or other electric components. Switches may be wired normally closed or normally open.

0490528

Model MPE-BZ is a single pull double throw (SPDT), has a 15 amp capacity for normal, low resistance electrical circuits and is UL and CSA listed. Solder terminals accept up to #14 wire. Vendor No. MPE-BZ

Part No. 0423200

Price /Ea $69.36

Description Aluminum Air-To-Electric Actuator head and 15 amp switch

Mini Regulator • MSR mini-regulator is a relieving type with a locking knob • Comes with a gauge and mounting bracket • Pressure range 8-130 psi • Max pressure 145 psi

Part No. 0423227

Vendor No. MSR200-06

0423228

MSR200-08

Description Aluminum Miniature Bracket Relieving Regulator Aluminum Miniature Bracket Relieving Regulator

Part No. 0490536 0490537 0490538 0490539 0490540 0490541 0490542 0490543 0490544 0490545 0490546

Price /Each $9.91 9.91 9.91 8.31 8.31 8.31 8.31 8.31 9.59 9.59 9.59

Description 30" Hg-0 0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi 0-400 psi 0-600 psi 0-1000 psi

3-1/2" Gauge 101D 1/4" Lower Mount • Black steel case with chrome bezel • Dry non-fillable • Brass connection and internals

Port Size 1/8" NPT

Price /Ea $19.25

1/4" NPT

19.25

0490528

Part No. 0490547 0490548 0490549 0490550 0490551 0490552 0490553 0490554 0490555 0490556 0490557

Dry Face Gauges

2" Gauge 101D 1/4" Lower Mount • Black steel case with chrome bezel • Dry non-fillable • Brass connection and internals

Description 30" Hg-0 0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi 0-400 psi 0-600 psi 0-1000 psi

Price /Each $15.81 15.81 14.73 14.73 14.73 14.73 14.73 14.73 15.81 15.81 15.81

1-1/2" Gauge 102D 1/8" Center Back Mount • Black steel case with chrome bezel • Dry non-fillable • Brass connection and internals 0490528

Part No. 0490528 0490529 0490530 0490531 0490532 0490533 0490534 0490535

Description 30" Hg-0 0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi

10-60 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Each $7.67 7.67 6.28 6.28 6.28 6.28 6.28 6.28

Part No. 0490558 0490559 0490560 0490561 0490562 0490563 0490564 0490565

Description 30" Hg-0 0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi

Price /Each $7.88 7.88 7.24 7.24 7.24 7.24 7.24 7.24

10_pHyd_43-96.qxd

3/11/07

2:19 PM

Page 61

DRY FACE GAUGES & LIQUID FILLED GAUGES 2-1/2" Gauge

2" Gauge

202L 1/4" Center Back Mount

102D 1/4" Center Back Mount • Black steel case with chrome bezel • Dry non-fillable • Brass connection and internals

• Stainless steel case and bezel • Brass internals and connection • Liquid filled • Plastic lens

Part No. 0490566 0490567 0490568 0490569 0490570 0490571 0490572 0490573

Description 30" Hg-0 0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi

Price /Each $7.88 7.88 7.24 7.24 7.24 7.24 7.24 7.24

2-1/2" Gauge 102D 1/4" Center Back Mount • Black steel case with chrome bezel • Dry non-fillable • Brass connection and internals Part No. 0490574 0490575 0490576 0490577 0490578 0490579 0490580 0490581 0490582 0490583 0490584

Description 30" Hg-0 0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi 0-400 psi 0-600 psi 0-1000 psi

Price /Each $10.98 10.98 11.52 11.52 11.52 11.52 11.52 11.52 12.38 12.38 12.38

Liquid Filled Gauges

2-1/2" Gauge 201L 1/4" Lower Mount • Stainless steel case and bezel • Brass internals and connection • Liquid filled • Plastic lens

Part No. 0490585 0490586 0490587 0490588 0490589 0490590 0490591 0490592 0490593 0490594 0490595 0490596 0490597 0490598 0490599 0490600 0490601 0490602 0490603

Description 30" Hg-0 0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi 0-400 psi 0-500 psi 0-600 psi 0-1000 psi 0-1500 psi 0-2000 psi 0-3000 psi 0-5000 psi 0-6000 psi 0-10000 psi 0-15000 psi

Price /Each $17.95 17.95 17.95 17.95 17.95 17.95 17.95 17.95 17.95 17.95 17.95 17.95 17.95 17.95 17.95 17.95 17.95 19.29 19.29

4" Dial Liquid Filled Gauge 1/2" Lower Mount • Stainless Steel Case • Brass Internals and Connection • Glycerine Filled • Plastic Lens

Part No. 0490604 0490605 0490606 0490607 0490608 0490609 0490610 0490611 0490612 0490613 0490614 0490615 0490616 0490617

Description 30" Hg-0 0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi 0-400 psi 0-600 psi 0-1000 psi 0-1500 psi 0-2000 psi 0-3000 psi

Price /Each $19.90 19.90 19.90 19.90 19.90 19.90 19.90 19.90 19.90 19.90 19.90 19.90 19.90 19.90

0490618 0490619 0490620 0490621

0-5000 psi 0-6000 psi 0-10000 psi 0-15000 psi

19.90 19.90 21.96 21.96

4" Dial Liquid Filled Gauge 1/4" Lower Mount

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Pressure Range 30" Hg-0 0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi 0-400 psi 0-500 psi 0-600 psi 0-1000 psi 0-1500 psi 0-2000 psi 0-3000 psi 0-5000 psi 0-6000 psi 0-10000 psi 0-15000 psi

Pressure Range 30"Hg-0-(Vac) 0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi 0-400 psi 0-500 psi 0-600 psi 0-1000 psi 0-1500 psi 0-2000 psi 0-3000 psi 0-5000 psi 0-6000 psi 0-10000 psi 0-15000 psi

Price /Ea $35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50

2.5" Dial All Stainless Gauge Liquid Filled - 1/4" Lower Mount

• Stainless Steel Case • Brass Internals and Connection • Glycerine Filled • Plastic Lens

Part No. 0440553 0440554 0440555 0440556 0440557 0440558 0440559 0440560 0440561 0440562 0440563 0440564 0440565 0440566 0440567 0440568 0440569 0440570 0440571

Part No. 0440572 0440573 0440574 0440575 0440576 0440577 0440578 0440579 0440580 0440581 0440582 0440583 0440584 0440585 0440586 0440587 0440588 0440589 0440590

Gauges

Dry Face Gauges Cont.

• 316L Stainless Steel Internals and Connection • Stainless Steel Case - Liquid Filled • Welded case to socket connection • Plastic Lens

Price /Ea $35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50 35.50

Part No. 0440646 0440647 0440648 0440649 0440650 0440651 0440652 0440653 0440654 0440655 0440656 0440657 0440658 0440659 0440660 0440661 0440662 0440663 0440664

Pressure Range 30"Hg-0-30 psi 30"Hg-0-(Vac) 0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi 0-400 psi 0-600 psi 0-1000 psi 0-1500 psi 0-2000 psi 0-3000 psi 0-5000 psi 0-6000 psi 0-10000 psi 0-15000 psi

Price /Ea $33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90

10-61 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_43-96.qxd

3/11/07

2:19 PM

Page 62

LIQUID FILLED GAUGES & THERMOMETERS Liquid Filled Gauges Cont. Gauges Thermometers

2.5" Dial All Stainless Gauge Liquid Filled - 1/4" Center Back Mount • 316L Stainless Steel Internals and Connection • Stainless Steel Case - Liquid Filled • Welded case to socket connection • Plastic Lens

Part No. 0440665 0440666 0440667 0440668 0440669 0440670 0440671 0440672 0440673 0440674 0440675 0440676 0440677 0440678 0440679 0440680 0440681 0440682 0440683

Pressure Range 30"Hg-0-30 psi 30"Hg-0-(Vac) 0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi 0-400 psi 0-600 psi 0-1000 psi 0-1500 psi 0-2000 psi 0-3000 psi 0-5000 psi 0-6000 psi 0-10000 psi 0-15000 psi

Price /Ea $33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90 33.90

Liquid Fillable Gauges 4" Dial All Stainless Gauge 0.5% Accuracy - 1/4" Lower Mount • Stainless Steel Case - Dry (Field Liquid Fillable) • 316L Stainless Steel Internals and Connection • 1/4" NPT Lower Mount • Welded case to socket connection • Safety Glass Lens • Built in Overload and Underload Stops Part No. 0440762 0440763 0440764 0440765 0440766 0440767 0440768 0440769 0440770 0440771 0440772 0440773 0440774 0440775 0440776 0440777 0440778 0440779 0440780 0440781

Pressure Range 30"Hg-0-30 psi 30"Hg-0-(Vac) 0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi 0-400 psi 0-600 psi 0-1000 psi 0-1500 psi 0-2000 psi 0-3000 psi 0-5000 psi 0-6000 psi 0-10000 psi 0-15000 psi 0-20000 psi

Price /Ea $65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 71.50 71.50

10-62 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

4" Dial All Stainless Gauge 0.5% Accuracy - 1/2" Lower Mount

4.5" Dial Process Gauge - 0.5% Accuracy - 1/2" Lower Mount

• Stainless Steel Case - Dry (Field Liquid Fillable) • 316L Stainless Steel Internals and Connection • 1/2" NPT Lower Mount • Welded case to socket connection • Safety Glass Lens • Built in Overload and Underload Stops Part No. 0440782 0440783 0440784 0440785 0440786 0440787 0440788 0440789 0440790 0440791 0440792 0440793 0440794 0440795 0440796 0440797 0440798 0440799 0440800 0440801

Pressure Range 30"Hg-0-30 psi 30"Hg-0-(Vac) 0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi 0-400 psi 0-600 psi 0-1000 psi 0-1500 psi 0-2000 psi 0-3000 psi 0-5000 psi 0-6000 psi 0-10000 psi 0-15000 psi 0-20000 psi

Price /Ea $65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 68.00 68.00

4.5" Dial Process Gauge - 0.5% Accuracy - 1/4" Lower Mount • Phenolic safety case (solid front, blow-out back) • Dry - (Field liquid fillable, no kit required) • 316L Stainless Steel Internals and Connection • 1/4" Lower Mount • Polycarbonate Lens • Built in overload and underload stops

Part No. 0440722 0440723 0440724 0440725 0440726 0440727 0440728 0440729 0440730 0440731 0440732 0440733 0440734 0440735 0440736 0440737 0440738 0440739 0440740 0440741

Pressure Range 30"Hg-0-30 psi 30"Hg-0-(Vac) 0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi 0-400 psi 0-600 psi 0-1000 psi 0-1500 psi 0-2000 psi 0-3000 psi 0-5000 psi 0-6000 psi 0-10000 psi 0-15000 psi 0-20000 psi

Price /Ea $69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 73.50 73.50

• Phenolic safety case (solid front, blow-out back) • Dry - (Field liquid fillable, no kit required) • 316L Stainless Steel Internals and Connection • 1/2" Lower Mount • Polycarbonate Lens • Built in overload and underload stops

Part No. 0440742 0440743

Pressure Range 30"Hg-0-30 psi 30"Hg-0-(Vac)

Price /Ea $69.00 69.00

0440744 0440745 0440746 0440747 0440748 0440749 0440750 0440751 0440752 0440753 0440754

0-15 psi 0-30 psi 0-60 psi 0-100 psi 0-160 psi 0-200 psi 0-300 psi 0-400 psi 0-600 psi 0-1000 psi 0-1500 psi

69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00

0440755 0440756 0440757 0440758 0440759 0440760 0440761

0-2000 psi 0-3000 psi 0-5000 psi 0-6000 psi 0-10000 psi 0-15000 psi 0-20000 psi

69.00 69.00 69.00 69.00 69.00 73.50 73.50

Thermometers

3" Dial Bimetal Thermometer • Stainless Steel construction • 1/2" NPT Rigid Stem Center Back Mount • +/- 1% full scale accuracy • Weatherproof/Hermetically Sealed • Reset at rear of case • Anti-Vibration Movement • Stem welded to socket • Dual Fahrenheit and Celsius scale

Stem Part No. Length -40°F to 120°F / -40°C to 49°C 0440802 2.5" 0440805 4" 0440808 6" 0440811 9" 0440814 12" 0°F to 250° / -18°C to 121°C 0440803 2.5" 0440806 4" 0440809 6" 0440812 9" 0440815 12" 50°F to 550°F / 10°C to 288°C 0440804 2.5" 0440807 4" 0440810 6" 0440813 9" 0440816 12"

Price /Ea $29.75 29.75 29.75 34.75 34.75 $29.75 29.75 29.75 34.75 34.75 $29.75 29.75 29.75 34.75 34.75

10_pHyd_43-96.qxd

3/11/07

2:19 PM

Page 63

THERMOMETERS, HIGH PRESSURE STEEL PIPE FITTINGS Thermometers Cont.

• 3/4 taper • Dry seal • Heat treated alloy steel

5" Dial Adjustable Angle Bimetal Thermometer

Small Pack

• Stainless Steel construction • 1/2" NPT Adjustable Angle • +/- 1% full scale accuracy • Weatherproof/Hermetically Sealed • Reset at rear of case • Anti-Vibration Movement • Stem welded to socket Part No. -40°F to 120°F / -40°C to 49°C 0440832 0440835 0440838 0440841 0440844 0°F to 250° / -18°C to 121°C 0440833 0440836 0440839 0440842 0440845 50°F to 550°F / 10°C to 288°C 0440834 0440837 0440840 0440843 0440846

Stem Length

Price /Ea

2.5" 4" 6" 9" 12"

$85.00 85.00 85.00 90.00 90.00

2.5" 4" 6" 9" 12"

85.00 85.00 85.00 90.00 90.00

2.5" 4" 6" 9" 12"

85.00 85.00 85.00 90.00 90.00

Size 1/16 1/8 1/4 3/8 1/2 3/4 1 1-1/4

T.P.I. 27 27 18 18 14 14 11-1/2 11-1/2

Key Size 5/32 3/16 1/4 5/16 3/8 9/16 5/8 3/4

Standard Pack

Part No.

Pkg. Qty.

Price /Pkg.

1181132 1181133 1181134 1181135 1181136

5 5 3 2 1

1.75 2.45 2.31 2.78 2.49

Part No. 81131 81132 81133 81134 81135 81136 81137 81138

Price /Pkg. $26.25 29.50 42.35 67.30 61.00 115.00 185.50 436.00

Pkg. Qty. 100 100 100 100 50 50 25 25

7/8" Taper, Heat Treated Alloy Steel • 7/8 taper • Flush seal • Heat treated alloy steel Small Pack Size 1/16 1/8 1/4 3/8 1/2 3/4

T.P.I. 27 27 18 18 14 14

Key Size 5/32 3/16 1/4 5/16 3/8 9/16

Part No. 1181141 1181142 1181143 1181144 1181145

Standard Pack Price /Pkg. $1.75 1.95 1.65 1.58 2.98

Pkg. Qty. 5 5 3 2 2

Part No. 81141 81142 81143 81144 81145 81146

Price /Pkg. $29.20 32.40 46.30 71.50 64.50 122.00

Pkg. Qty. 100 100 100 100 50 50

Pipe Plugs Metric-DIN 906-Plain

High Pressure Steel Pipe Fittings

Pipe thread is always measured by outside diameter (OD) less 1/4". All pipe, no matter what material and pressure or schedule rating, has the same outside diameter. The wall thickness and the process used in making the pipe will determine the amount of pressure a pipe can carry.

Merchant Steel Plugs 3/4" Taper

Size M10-1.0 M12-1.5 M14-1.5 M16-1.5 M20-1.5 M18-1.5 M22-1.5 M24-1.5 M26-1.5 M30-1.5

Part No. 40124 40125 40126 40127 40128 40129 40130 38843 40132 40133

Price /100 $0.90 1.51 1.99 2.11 2.55 3.01 3.45 3.94 4.27 6.15

Pkg. Qty. 100 100 100 100 100 100 50 50 50 25

Dry seal

Part No. 24131 24132 24133 24134 24135 24136 24137 24138

Size 1/16 1/8 1/4 3/8 1/2 3/4 1 1-1/4

T.P.I. 27 27 18 18 14 14 11-1/2 11-1/2

Key Size 5/32 3/16 1/4 5/16 3/8 9/16 5/8 3/4

Wt./100 .50 .80 2.00 4.00 5.80 10.20 21.20 38.00

Price /Pkg. $11.25 12.27 13.45 15.27 12.86 18.75 20.92 47.00

Seal Nut for Male Pipe Thread

Pkg. Qty. 100 100 100 100 50 50 25 25

Wt./100 .50 .80 2.00 4.00 5.80 10.20 21.20 38.00

Part No. 24139 24142 24143 24144 24145 24146 24147 24148

Price /Pkg. $15.27 15.63 17.45 21.25 17.95 34.54 49.75 213.00

Hex Socket Plug

7/8" Taper Flush seal Size 1/16 1/8 1/4 3/8 1/2 3/4 1 1-1/4

T.P.I. 27 27 18 18 14 14 11-1/2 11-1/2

Key Size 5/32 3/16 1/4 5/16 3/8 9/16 5/8 3/4

Pkg. Qty. 100 100 100 100 50 50 25 25

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Vendor No. C3059X2 C3059X4 C3059X6 C3059X8 C3059X12 C3059X16

MPT 1/8 1/4 3/8 1/2 3/4 1

Price /Each $3.30 4.24 4.69 6.07 8.18 11.16

Part No. 424100-131280 424101-131280 424102-131280 424103-131280 424104-131280 424105-131280

Weatherhead MPT 1/16 1/8 1/4

Vendor No. C3169X1 C3169X2 C3169X4

Part No. 424106-131280 424107-131280 424108-131280

Utility Price /Each $1.02 1.31 1.91

Part No. 421359 421360 421361

Price /Each $0.31 0.19 0.21

10-63 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

High Pressure Pipe Fittings

Holo-Krome Socket Pipe Plugs

10_pHyd_43-96.qxd

3/11/07

2:19 PM

Page 64

HIGH PRESSURE STEEL PIPE FITTINGS High Pressure Steel Pipe Fittings Cont.

Bushing

High Pressure Pipe Fittings

Straight Thread O-Ring Hex Socket Plug

Vendor No. 7238X2 7238X3 7238X4 7238X6 7238X8 7238X10 7238X12 7238X16 7238X20

Port 1/8 3/16 1/4 3/8 1/2 5/8 3/4 1 1-1/4

Weatherhead

Price /Each $1.37 1.33 1.10 1.49 2.02 1.91 3.81 5.58 5.79

Part No. 420176-131280 420177-131280 420178-131280 420181-131280 420182-131280 420183-131280 420184-131280 420186-131280 420187-131280

Square Head Plug Weatherhead MPT 1/8 1/4 3/8 1/2 3/4 1

Utility

Vendor No.

Part No.

Price /Each

C3179X2 C3179X4 C3179X6 C3179X8 C3179X12 C3179X16

424109-131280 424110-131280 424111-131280 424112-131280 424113-131280 424114-131280

$1.56 1.62 2.10 2.98 4.15 12.44

Part No.

Price /Each

421362 421363 421364 421365 421366

$0.98 1.09 1.45 2.02 2.68

Hex Head Plug Weatherhead MPT 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2

Vendor No. C3159X2 C3159X4 C3159X6 C3159X8 C3159X12 C3159X16 C3159X20 C3159X24 C3159X32

Part No. 424115-131280 424116-131280 424117-131280 424118-131280 424119-131280 424120-131280 424121-131280 424122-131280 424123-131280

Utility Price /Each $0.70 0.82 0.94 1.78 2.80 5.44 8.78 16.92 31.04

Part No. 421368 421369 421370 421371 421372 421373 421374 421375 421376

Price /Each $0.54 0.66 0.81 1.19 2.66 4.12 6.27 10.98 21.69

Straight Thread O-Ring Hex Head Plug

Port 1/4 3/8 1/2 5/8 3/4 7/8 1 1-1/4

Vendor No. 7237X4* 7237X6* 7237X8* 7237X10* 7237X12* 7237X14* 7237X16 7237X20

Part No. 420190-131280 420192-131280 420193-131280 420194-131280 420195-131280 420196-131280 420197-131280 420198-131280

*Not counterbored. Note: Parts furnished with zinc plate.

10-64 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Each $1.06 1.40 1.46 2.31 4.35 5.46 5.52 11.82

MPT 1/4 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 1 1 1 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 2 2

FPT 1/8 1/8 1/4 1/8 1/4 3/8 1/4 3/8 1/2 3/8 1/2 3/4 1/2 3/4 1 3/4 1 1-1/4 1-1/4 1-1/2

Vendor No. C3109X4X2 C3109X6X2 C3109X6X4 C3109X8X2 C3109X8X4 C3109X8X6 C3109X12X4 C3109X12X6 C3109X12X8 C3109X16X6 C3109X16X8 C3109X16X12 C3109X20X8 C3109X20X12 C3109X20X16 C3109X24X12 C3109X24X16 C3109X24X20 C3109X32X20 C3109X32X24

Part No. 424124-131280 424125-131280 424126-131280 424127-131280 424128-131280 424129-131280 424130-131280 424131-131280 424132-131280 424133-131280 424134-131280 424135-131280 424136-131280 424137-131280 424138-131280 424139-131280 424140-131280 424141-131280 424142-131280 424143-131280

Utility Price /Each $1.17 1.11 1.50 6.46 2.60 2.43 3.69 3.70 3.32 6.74 5.84 5.35 12.81 11.00 10.59 19.36 17.56 19.38 32.20 32.17

Price /Each $0.67 0.77 0.88 3.30 1.45 1.40 2.24 2.24 1.86 4.23 3.59 3.30 8.84 6.94 7.02 12.36 12.11 12.79 23.03 22.49

Part No. 421377 421378 421379 421380 421381 421382 421383 421384 421385 421386 421387 421388 421389 421390 421391 421392 421393 421394 421395 421396

Straight Thread O-Ring to Female Pipe Adapter Weatherhead Port 1/4 1/4 5/16 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 5/8 5/8 3/4 3/4 7/8 1 1 1 1-1/4 1-1/4 1-1/2 2

FPT 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 1/4 3/8 1/2 3/4 1/2 3/4 3/4 1/2 3/4 1 1 1-1/4 1-1/2 2

Vendor No. C3269X4X2 C3269X4X4 C3269X5X2 C3269X6X4 C3269X6X6 C3269X6X8 C3269X8X4 C3269X8X6 C3269X8X8 C3269X10X4 C3269X10X6 C3269X10X8 C3269X10X12 C3269X12X8 C3269X12X12 C3269X14X12 C3269X16X8 C3269X16X12 C3269X16X16 C3269X20X16 C3269X20X20 C3269X24X24 C3269X32X32

Part No. 424144-131280 424145-131280 424146-131280 424147-131280 424148-131280 424149-131280 424150-131280 424151-131280 424152-131280 424153-131280 424154-131280 424155-131280 424156-131280 424157-131280 424158-131280 424159-131280 424160-131280 424161-131280 424162-131280 424163-131280 424164-131280 424165-131280 424166-131280

Utility Price /Each $2.07 3.65 3.11 2.63 5.29 11.07 4.42 3.30 4.63 4.75 4.60 3.97 8.08 5.79 5.93 10.63 11.60 8.21 11.11 15.37 18.65 95.02 138.89

Part No. 421397 421398 421399 421400 421401 421402 421403 421404 421405 421406 421407 421408 421409 421410 421411 421412 421413 421414 421415 421416

Price /Each $1.19 3.23 2.21 1.81 2.23 8.06 3.04 2.12 2.68 2.95 3.37 2.48 5.99 3.87 3.76 7.47 6.44 5.49 7.66 11.23

421420 421421 421422 421423 421424 421425 421426 421427 421428 421429

$2.31 2.43 7.45 4.47 3.61 11.33 5.46 14.35 10.51 30.90

Adapter

MPT FPT 1/4 3/8 1/2 1/2 1/2 3/4 3/4 1 1 1-1/4 1-1/2 2

Vendor No. 1/8 1/4 1/8 1/4 3/8 1/4 1/2 1/2 3/4 1 1-1/4 1-1/2

Weatherhead Utility Price Price /Each Part No. /Each 424167-131280 424168-131280 424169-131280 424170-131280 424171-131280 424172-131280 424173-131280 424174-131280 424175-131280 424176-131280 424177-131280 424178-131280

Part No. C3209X4X2 C3209X6X4 C3209X8X2 C3209X8X4 C3209X8X6 C3209X12X4 C3209X12X8 C3209X16X8 C3209X16X12 C3209X20X16 C3209X24X20 C3209X32X24

$2.75 3.51 13.34 6.23 5.84 16.46 7.85 19.74 14.99 61.41 131.60 101.13

10_pHyd_43-96.qxd

3/11/07

2:19 PM

Page 65

High Pressure Steel Pipe Fittings Cont.

Male Straight Thread O-Ring to Male Pipe Adapter

Female Straight Thread O-Ring to Male Pipe Adapter

Port 1/4 3/8 1/2 1/2 5/8 3/4 1 1-1/4 1-1/2

Weatherhead

Female Port x MPT 3/8 x3/8 3/8 x1/2 1/2 x3/8 1/2 x1/2 5/8 x1/2

Weatherhead Vendor No. C3239X6X6 C3239X6X8 C3239X8X6 C3239X8X8 C3239X10X8

Part No. 424179-131280 424180-131280 424181-131280 424182-131280 424183-131280

Utility Price /Each $3.69 4.75 4.85 5.71 6.92

Hex Nipple

Price /Each $3.29 9.89 3.61 5.65 4.04

Part No. 421432 421433 421434 421435 421436

Vendor No. C3249X4X2 C3249X6X4 C3249X8X6 C3249X8X8 C3249X10X8 C3249X12X12 C3249X16X16 C3249X20X20 C3249X24X24

MPT 1/8 1/4 3/8 1/2 1/2 3/4 1 1-1/4 1-1/2

Bulkhead Coupling (F)

Utility Price /Each $3.13 2.04 3.22 8.35 4.94 6.00 10.23 14.26 62.89

Part No. 424215-131280 424216-131280 424217-131280 424218-131280 424219-131280 424220-131280 424221-131280 424222-131280 424223-131280

Price /Each $2.06 1.24 2.10 3.09 3.55 4.29 7.12 9.94 39.14

Part No. 421468 421469 421470 421471 421472 421473 421474 421475 421476

45° Street Elbow Forged

Weatherhead Utility Vendor Price Price No. Part No. /Each Part No. /Each C3069X2 424199-131280 $1.15 421452 $0.69 C3069X4X2 424200-131280 1.69 421453 1.08 C3069X4 424201-131280 1.52 421454 0.81

MPT 1/8 x1/8 1/4 x1/8 1/4 x1/4 3/8 x1/8 3/8 x1/4 3/8 x3/8 1/2 x1/4 1/2 x3/8 1/2 x1/2 3/4 x1/2 3/4 x3/4 1 x3/4 1x1 1-1/4 x 1-1/4 1-1/2 x 1-1/2 2x2

C3069X6X2 C3069X6X4 C3069X6 C3069X8X4 C3069X8X6 C3069X8 C3069X12X8 C3069X12 C3069X16X12 C3069X16 C3069X20 C3069X24 C3069X32

424202-131280 424203-131280 424204-131280 424205-131280 424206-131280 424207-131280 424208-131280 424209-131280 424210-131280 424211-131280 424212-131280 424213-131280 424214-131280

3.78 2.04 2.07 3.49 3.53 2.83 5.45 4.70 8.43 7.66 12.84 29.78 76.96

421455 2.71 421456 1.19 421457 1.24 421458 2.01 421459 1.91 421460 1.68 421461 3.12 421462 2.79 421463 5.77 421464 5.13 421465 9.16 421466 18.54 421467 42.65

Vendor No. W05465 W21204 W17709

FPT 1/4 1/4 3/8

Price /Each $6.41 5.94 14.67

Part No. 424225-131280 424226-131280 424227-131280

Bulkhead Coupling (M x F)

Port 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2

Part No. 423162-131280 423163-131280 423164-131280 423165-131280 423166-131280 423167-131280 423168-131280 423169-131280

Price /Each $7.15 8.81 11.34 15.38 18.64 40.88 63.60 76.04

Coupling

Vendor FPT No. 1/8 x1/8 C3309X2 1/4 x1/8 C3309X4X2 1/4 x1/4 C3309X4 3/8 x1/4 C3309X6X4 3/8 x3/8 C3309X6 1/2 x1/4 C3309X8X4 1/2 x3/8 C3309X8X6 1/2 x1/2 C3309X8 3/4 x1/2 C3309X12X8 3/4 x3/4 C3309X12 1 x3/4 C3309X16X12 1x1 C3309X16 1-1/4 x 1-1/4 C3309X20 1-1/2 x 1-1/2 C3309X24 2x2 C3309X32

Weatherhead Utility Price Price Part No. /Each Part No. /Each 424184-131280 $2.14 421437 $1.34 424185-131280 4.42 421438 3.17 424186-131280 2.85 421439 1.60 424187-131280 4.16 421440 2.79 424188-131280 3.55 421441 2.24 424189-131280 6.16 421442 3.40 424190-131280 6.04 421443 3.51 424191-131280 5.18 421444 2.84 424192-131280 9.89 421445 6.70 424193-131280 7.48 421446 4.18 424194-131280 19.53 421447 13.91 424195-131280 14.48 421448 8.09 424196-131280 24.42 421449 16.74 424197-131280 43.87 421450 31.06 424198-131280 124.29 421451 66.52

3/8 1/2 3/4 1

3/8 1/2 3/4 1

C3359X6 C3359X8 C3359X12 C3359X16

424239-131280 424240-131280 424241-131280 424242-131280

7.65 12.55 18.87 29.17

421492 4.28 421493 6.38 421494 8.76 421495 16.54

Weatherhead Price /Each $6.23 5.12 6.44 8.62 13.78 22.69 73.07 153.50

Utility Price Part No. /Each 421499 $4.45

45° Street Elbow MPT 1/2 1/2

FPT 1/4 1/4

Vendor No. W05498 W05499

Price /Each $10.24 13.28

Part No. 424228-131280 424229-131280

Straight Thread ORing Union Vendor No. C5314x4 C5314x6x6 C5314x8x8 C5314x10x10 C5314x12x12 C5314x16x16 C5314x20x20 C5314x24x24

Weatherhead Utility Vendor Price Price MPT FPT No. Part No. /Each Part No. /Each 1/8 1/8 C3359X2 424237-131280 $5.94 421490 $12.35 1/4 1/4 TF3359X4 424238-131280 6.02 421500 3.46

MPT 1/2 1/2

FPT 1/4 1/4

Vendor No. W05730 W23464

Price /Each $25.41 31.90

Part No. 424230-131280 424231-131280

45° Elbow Female Pipe

Brazed

MPT 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2

FPT 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2

Vendor No. TF3359X2 TF3359X4 TF3359X6 TF3359X8 TF3359X12 TF3359X16 TF3359X20 TF3359X24

Part No. 424246-131280 424247-131280 424248-131280 424249-131280 424250-131280 424251-131280 424252-131280 424253-131280

421501 421502 421503 421504

4.54 6.70 9.87 16.27

90° Elbow

Forged

Forged

Vendor FPT No. 3/8 C3559X6 1/2 C3559X8 3/4 C3559X12 1 C3559X16

Weatherhead Price Part No. /Each 424232-131280 $9.39 424233-131280 15.43 424234-131280 25.96 424235-131280 33.61

Utility Part No. 421485 421486 421487 421488

Price /Each $6.55 11.65 18.03 23.30

45° Elbow Female Pipe Brazed

FPT 1/8 1/4 3/8 1/2 3/4 1 1-1/4 2

Vendor No. C3509X2 C3509X4 C3509X6 C3509X8 C3509X12 C3509X16 C3509X20 C3509X32

Weatherhead Price /Each $5.35 5.70 8.51 11.09 16.33 27.94 50.44 307.01

Part No. 424255-131280 424256-131280 424257-131280 424258-131280 424259-131280 424260-131280 424261-131280 424263-131280

Utility Part No. 421508 421509 421510 421511 421512 421513

Price /Each $2.67 2.79 3.35 5.67 9.27 15.81

Weatherhead Utility Vendor Price Price FPT No. Part No. /Each Part No. /Each 1/4 TF3559X4 424236-131280 $7.88 421489 $5.60

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

10-65 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

High Pressure Pipe Fittings

STEEL PIPE FITTINGS

10_pHyd_43-96.qxd

3/11/07

2:20 PM

Page 66

HIGH PRESSURE STEEL PIPE FITTINGS High Pressure Steel Pipe Fittings Cont.

90° Straight Thread O-Ring Elbow Forged

High Pressure Pipe Fittings

90° Elbow Brazed Port 1/8 x1/8 1/4 x1/8 1/4 x1/4 3/8 x1/4 3/8 x3/8 1/2 x3/8 1/2 x1/2 3/4 x1/2

Weatherhead Price /Each $2.95 3.89 3.63 8.93 7.96 10.59 8.22 52.02

Vendor No. TF3509X2 TF3509X4X2 TF3509X4 TF3509X6X4 TF3509X6 TF3509X8X6 TF3509X8 TF3509X12X8

Part No. 424264-131280 424265-131280 424266-131280 424267-131280 424268-131280 424269-131280 424270-131280 424271-131280

TF3509X12 TF3509X16 TF3509X20 TF3509X24

424272-131280 424273-131280 424274-131280 424275-131280

3/4 x3/4 1x1 1-1/4 x 1-1/4 1-1/2 x 1-1/2

35.93 44.83 75.10 67.60

Utility Part No. 421517 421518 421519 421520 421521 421522 421523 421524

Price /Each $2.66 2.99 3.35 4.54 3.82 8.55 6.24 14.42

421525 421526

9.89 16.11

Weatherhead Port 1/2 5/8 3/4 1

Vendor No. C3459X8 C3459X10 C3459X12 C3459X16

FPT 3/8 1/2 3/4 1

Part No. 424301-131280 424302-131280 424303-131280 424304-131280

Utility Price /Each $10.56 19.40 22.67 35.08

Part No. 421554 421555 421556 421557

90° Straight Thread O-Ring Elbow Brazed

Weatherhead

90° Street Elbow Forged

Weatherhead Port 1/8 1/4 3/8 1/2 3/4 1 1-1/4

FPT 1/8 1/4 3/8 1/2 3/4 1 1-1/4

Vendor No. C3409X2 C3409X4 C3409X6 C3409X8 C3409X12 C3409X16 C3409X20

Part No. 424276-131280 424277-131280 424278-131280 424279-131280 424280-131280 424281-131280 424282-131280

Utility Price /Each $3.43 5.38 7.26 10.45 17.29 27.69 43.88

Part No. 421529 421530 421531 421532 421533 421534

Price /Each $2.27 3.04 3.61 5.31 8.50 14.68

Weatherhead FPT 1/8 1/4 1/8 1/4 3/8 1/4

3/8 3/8 1/2 1/2 1/2 3/4 3/4 1 1-1/4 1-1/2

3/8 1/2 3/8 1/2 3/4 1/2 3/4 1 1-1/4 1-1/2

TF3409X6 TF3409X6X8 TF3409X8X6 TF3409X8 TF3409X8X12 TF3409X12X8 TF3409X12 TF3409X16 TF3409X20 TF3409X24

FPT 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2

Utility

Part No. 424285-131280 424286-131280 424287-131280 424288-131280 424289-131280 424290-131280

Price /Each $3.53 4.48 4.56 4.74 5.34 5.36

424291-131280 424292-131280 424293-131280 424294-131280 424295-131280 424296-131280 424297-131280 424298-131280 424299-131280 424300-131280

5.62 9.68 7.92 9.05 16.12 14.95 13.96 21.94 43.95 79.71

10-66 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No.

Price /Each

TF3459X6 TF3459X8 TF3459X10 TF3459X12 TF3459X16 TF3459X20

424307-131280 424308-131280 424309-131280 424310-131280 424312-131280 424313-131280

$10.48 12.04 24.73 40.89 55.45 68.58

TF3459X32

424315-131280

262.62

Part No. 421558 421560 421561 421562 421563 421565 421566 421567 421568

Price /Each $3.58 5.26 7.21 9.38 12.62 24.13 33.05 63.20 239.85

90° Straight Thread O-Ring Elbow

Port 1/2 5/8 3/4 1

Brazed

MPT 1/8 1/8 1/4 1/4 1/4 3/8

Port 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2

Utility

Vendor No.

Long - Forged

90° Street Elbow

Vendor No. TF3409X2 TF3409X2X4 TF3409X4X2 TF3409X4 TF3409X4X6 TF3409X6X4

Price /Each $6.70 9.22 12.27 22.93

Part No. 421538

Price /Each $2.37

421540 421541 421542 421543

3.05 2.85 3.61 3.61

421544 421545 421546 421547 421548 421549 421550 421551 421552 421553

3.49 6.97 5.67 5.63 11.93 10.72 8.24 15.19 30.39 56.34

FPT 3/8 1/2 3/4 1

Vendor No. C3469X8 C3469X10 C3469X12 C3469X16

Price /Each $30.75 35.13 57.06 102.34

Part No. 424316-131280 424317-131280 424318-131280 424319-131280

90° Straight Thread O-Ring Elbow to Male Pipe Brazed

Weatherhead Port 1/4 3/8 1/2 5/8 3/4 7/8 1

MPT 1/8 1/4 3/8 1/2 3/4 3/4 1

Utility

Part No. 424320-131280 424322-131280 424323-131280 424324-131280 424325-131280

Price /Each $6.22 6.08 8.81 12.03 18.28

424327-131280

29.97

Part No. 421573 421575 421576 421577 421578 421579 421580

Price /Each $4.61 4.32 6.96 8.87 13.48 27.72 22.19

10_pHyd_43-96.qxd

3/11/07

2:20 PM

Page 67

HIGH PRESSURE STEEL PIPE FITTINGS High Pressure Steel Pipe Fittings Cont.

90° Male Elbow

90° Male Elbow Forged

Weatherhead

Weatherhead Vendor No. C3529X2 C3529X4 C3529X6 C3529X8 C3529X12

MPT 1/8 1/4 3/8 1/2 3/4

Utility Price /Each $4.69 5.51 7.13 9.16 13.88

Part No. 424331-131280 424332-131280 424333-131280 424334-131280 424335-131280

Tee

Part No. 421584 421585 421586 421587 421588

Price /Each $2.26 2.68 3.61 5.12 7.73

MPT 1/8 x1/8 1/4 x1/4 3/8 x1/4 3/8 x3/8 1/2 x3/8 1/2 x1/2 3/4 x1/2 3/4 x3/4 1 x3/4 1x1 1-1/4 x 1-1/4 1-1/2 x 1-1/2

Vendor No. TF3529X2 TF3529X4 TF3529X6X4 TF3529X6 TF3529X8X6 TF3529X8 TF3529X12X8 TF3529X12 TF3529X16X12 TF3529X16 TF3529X20 TF3529X24

Male Branch Tee

Forged

Part No. 424337-131280 424338-131280 424339-131280 424340-131280 424341-131280 424342-131280 424343-131280 424344-131280 424345-131280 424346-131280 424347-131280 424348-131280

Utility Price /Each $3.69 4.70 5.72 5.92 7.34 7.11 12.45 12.46 20.12 19.76 38.05 55.55

Price /Each $2.67 3.13 4.11 4.32 7.08 5.75 9.32 9.16 14.98 14.70

Part No. 421590 421591 421592 421593 421594 421595 421596 421597 421598 421599

Female Run Tee

Brazed

Brazed

Vendor FPT No. 1/8 C3709X2 1/4 C3709X4 3/8 C3709X6 1/2 C3709X8 3/4 C3709X12 1 C3709X16 1-1/4 C3709X20

Weatherhead Price Part No. /Each 424439-131280 $6.58 424440-131280 7.41 424441-131280 10.80 424442-131280 13.60 424443-131280 21.75 424444-131280 35.10 424445-131280 63.55

Utility Part No. 421602 421603 421604 421605 421606 421607

Price /Each $3.72 4.85 8.94 12.99 15.78 3.35

MPT 1/8 1/4 3/8 1/2 3/4 1

FPT 1/8 1/4 3/8 1/2 3/4 1

Weatherhead Price Part No. /Each 424461-131280 $5.14 424462-131280 6.09 424463-131280 12.46 424464-131280 18.14 424465-131280 17.97 424466-131280 30.82

Vendor No. TF3609X2 TF3609X4 TF3609X6 TF3609X8 TF3609X12 TF3609X16

Utility Price Part No. /Each 421625 421626 421627 421628

5.17 7.06 9.65 14.42

FPT 1/4 3/8 1/2 3/4 1

Vendor No. TF3805X4 TF3805X6 TF3805X8 TF3805X12 TF3805X16

Price /Each $6.72 9.63 15.74 23.30 38.02

Part No. 424484-131280 424485-131280 424486-131280 424487-131280 424488-131280

Cross

Male Run Tee

Tee

MPT 1/4 3/8 1/2 3/4 1

Forged

Forged

Brazed

FPT 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2

Vendor No. TF3709X2 TF3709X4 TF3709X6 TF3709X8 TF3709X12 TF3709X16 TF3709X20 TF3709X24 TF3709X32

Weatherhead Price /Each $4.73 5.08 7.98 10.21 15.29 26.96 48.79 96.26 338.25

Part No. 424446-131280 424447-131280 424448-131280 424449-131280 424450-131280 424451-131280 424452-131280 424453-131280 424454-131280

Utility Part No. 421609 421610 421611 421612 421613 421614

Price /Each $4.46 4.98 7.80 7.94 14.46 13.91

MPT 1/8 1/4 3/8 1/2 3/4 1

FPT 1/8 1/4 3/8 1/2 3/4 1

Vendor No. C3759X2 C3759X4 C3759X6 C3759X8 C3759X12 C3759X16

Weatherhead Price Part No. /Each 424469-131280 $7.69 424470-131280 7.97 424471-131280 11.73 424472-131280 15.46 424473-131280 22.77 424474-131280 48.26

Vendor No. C3609X2 C3609X4

Price Part No. 424455-131280 424456-131280

Utility Part No. 421656 421657 421658

Price /Each $8.76 13.34 21.12

Cross Brazed

Brazed

Forged

FPT 1/8 1/4

Weatherhead Vendor Price FPT No. Part No. /Each 3/8 C3959X6 424493-131280 $18.15 1/2 C3959X8 424494-131280 22.42 3/4 C3959X12 424495-131280 36.57

Male Run Tee

Male Branch Tee

MPT 1/8 1/4

Utility Price Part No. /Each 421632 $3.09 421633 4.01 421634 5.41 421635 9.98 421636 13.34 421637 31.16

/Each $8.50 9.26

MPT 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2

FPT 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Vendor No. TF3759X2 TF3759X4 TF3759X6 TF3759X8 TF3759X12 TF3759X16 TF3759X20 TF3759X24

Weatherhead Price Part No. /Each 424475-131280 $4.87 424476-131280 6.05 424477-131280 8.50 424478-131280 13.44 424479-131280 20.85 424480-131280 37.30 424481-131280 71.47 424482-131280 138.92

Utility Price Part No. /Each 421638 $3.95 421639 4.66 421640 5.48 421641 8.47 421642 13.47 421643 26.52

FPT 1/8 1/4 3/8 1/2 3/4 1

Vendor No. TF3959X2 TF3959X4 TF3959X6 TF3959X8 TF3959X12 TF3959X16

Part No. 424497-131280 424498-131280 424499-131280 424500-131280 424501-131280 424502-131280

Price /Each $10.03 11.34 13.55 18.28 26.79 51.20

10-67 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

High Pressure Pipe Fittings

Brazed

10_pHyd_43-96.qxd

3/11/07

2:20 PM

Page 68

HIGH PRESSURE STAINLESS STEEL PIPE FITTINGS Pipe Reducer Coupling

High Pressure Stainless Steel Pipe Fittings High Pressure Pipe Fittings

Female Pipe Coupling

Pipe 1/8 1/4 x1/8 1/4 3/8 x1/4 3/8 1/2 x1/4 1/2 x3/8 1/2 3/4 x1/2 3/4 1 x3/4 1 1-1/4 x 1 1-1/4 1-1/2 2

Part No. 426207 426208 426209 426210 426211 426212 426213 426214 426216 426217 426218 426219 426220 426221 426222 426223

Price /Each $7.83 10.93 9.71 13.68 13.45 24.77 19.82 34.91 33.75 33.49 55.72 52.91 371.46 119.38 208.89 326.72

Male Hex Nipple

Pipe 1/8 1/4 x1/8 1/4 3/4 x1/4 3/8 1/2 x1/4 1/2 x3/8 1/2 3/4 x1/2 3/4 1 x3/4 1 1-1/4 x 1 1-1/4

Part No. 426224 426225 426226 426228 426229 426230 426231 426232 426234 426235 426238 426239 426240 426241

Price /Each $4.51 7.35 6.16 9.91 8.74 15.54 15.49 13.13 19.18 22.66 81.94 40.17 159.87 119.38

Male Pipe Nipple Extended

NPTF 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2

Length 1.5 2 2.5 1.5 2 2.5 3 4 2.5 3 6 1.13 2.5 3

Part No. 426245 426246 426247 426248 426249 426250 426251 426252 426253 426254 426256 426257 426259 426260

Price /Each $9.29 9.59 9.01 10.98 12.06 10.35 14.20 16.61 82.16 53.03 115.67 9.49 16.34 29.27

10-68 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

MPT 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 1 1 1-1/4

Socket Pipe Plugs

FPT 1/8 1/4 3/8 1/2 1/8 1/4 3/8 1/2 3/4 3/8 1/2 1/2 1/2 3/4 1 1 1-1/4 1-1/2

Part No. 426261 426262 426263 426264 426265 426266 426267 426268 426269 426270 426271 426272 426273 426274 426275 426278 426279 426281

Price /Each $7.88 9.49 14.87 25.89 77.10 8.84 14.20 21.16 40.53 15.27 21.96 121.54 18.75 29.20 103.93 128.03 166.57 202.50

Grade 18-8 3/4" Taper

Size 1/16 1/8 1/4 3/8 1/2 3/4 1" 1-1/4

Part No. 73389 73390 73391 73392 73393 73394 73395 73396

T.P.I. 27 27 18 18 14 14 11-1/2 11-1/2

Key Size 5/32 3/16 1/4 5/16 3/8 9/16 5/8 3/4

Case Qty. 100 100 100 100 50 50 25 25

90° Male Pipe Elbow

Pipe Reducer Bushing

Pipe 1/4 x1/8 3/8 x1/8 3/8 x1/4 1/2 x1/8 1/2 x1/4 1/2 x3/8 3/4 x1/4 3/4 x3/8 3/4 x1/2 1 x3/4 1-1/4 x3/8 1-1/4 x1/2 1-1/4 x3/4 1-1/4 x 1 1-1/2 x 1 1-1/2 x 1-1/4 2 x3/4 2x1 2 x 1-1/2

Part No. 426284 426285 426286 426287 426288 426289 426290 426291 426292 426297 426299 426300 426301 426302 426307 426308 426310 426311 426313

Price /Each $6.60 7.50 7.72 14.58 10.45 11.52 17.68 18.38 17.84 26.83 123.83 98.55 88.90 88.90 158.52 144.62 252.77 211.05 211.05

Price /Each $1.00 0.92 1.18 2.83 5.36 11.88 19.43 27.29

Pipe 1/8 1/4 x1/8 1/4 3/8 x1/4 3/8 1/2 3/4 1

Part No. 426331 426332 426333 426334 426335 426337 426338 426339

Price /Each $14.20 30.80 17.41 81.94 34.28 33.75 127.52 146.33

45° Male Pipe Elbow

Pipe 1/8 1/4 3/8 1/2 3/4

Part No. 426343 426344 426345 426346 426347

Price /Each $28.14 57.84 58.54 61.32 122.74

90° Street Elbow

Plug Socket Head

Pipe 1/16 1/8 1/4 3/8 1/2 3/4 1 1-1/4

Part No. 426314 426315 426316 426317 426318 426319 426320 426321

Price /Each $9.91 20.54 15.48 18.22 33.21 48.74 56.55 94.80

MPT 1/8 1/4 1/4 3/8 3/8 1/2 1/2 3/4 1 1-1/2

FPT 1/8 1/8 1/4 1/4 3/8 3/8 1/2 3/4 1 1-1/2

Part No. 426348 426351 426352 426354 426355 426357 426358 426361 426362 426364

Price /Each $17.95 46.15 22.40 72.84 29.73 75.51 40.44 100.69 184.27 500.90

Plug Hex Head 45° Street Elbow

Pipe 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2

Part No. 426322 426323 426324 426325 426326 426327 426328 426329

Price /Each $4.29 5.19 7.03 12.11 16.88 29.46 148.60 160.68

Pipe 1/8 1/4 3/8 1/2 3/4 1 1-1/4

Part No. 426365 426366 426367 426368 426369 426370 426371

Price /Each $26.25 31.34 85.69 98.55 172.53 263.44 508.69

10_pHyd_43-96.qxd

3/11/07

2:20 PM

Page 69

HIGH PRESSURE STAINLESS STEEL PIPE FITTINGS Female Pipe Tee

90° Female Pipe Elbow

Pipe 1/8 1/4 x1/8 1/4 3/8 x1/4 3/8 1/2 3/4 1

Part No. 426372 426373 426374 426375 426376 426377 426378 426379

Price /Each $17.41 222.79 21.70 56.77 28.93 38.03 66.14 144.10

Pipe 1/8 1/4 3/8 1/2 3/4 1

Pipe 1/8

Part No. 426383

Price /Each $34.82

1/4 3/8 1/2 3/4

426384 426385 426386 426387

93.70 79.26 61.05 167.76

Part No. 426389 426390 426391 426392

Price /Each $23.57 47.51 51.69 151.42

Price /Each $25.45 28.66 39.64 60.21 99.05 159.65

Part No. 426432 426433

Price /Each $56.84 81.94

Female Pipe Cross

Pipe 1/4 3/8

45° Female Pipe Elbow

Part No. 426422 426423 426424 426425 426426 426427

Steel SAE 37° (JIC) Flare-Twin

Male Connector

Male Pipe Tee Pipe 1/4 3/8 1/2 3/4

Female Run Service Tee

Pipe 1/4 3/8 1/2

Part No. 426401 426402 426403

Price /Each $28.67 46.13 64.00

Part No. 426410 426411

Price /Each $85.96 123.19

Part No. 426417 426418

Price /Each $70.15 75.51

Male Run Pipe Tee

Pipe 3/8 1/2

Male Branch Pipe Tee

Pipe 3/8 1/2

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Weatherhead Tube O.D. 1/8 3/16 1/4 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 7/8 1 1 1 1-1/4 1-1/4 1-1/2 1-1/2 2

MPT 1/8 1/8 1/8 1/4 3/8 1/2 1/8 1/4 3/8 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4 3/8 1/2 3/4 1/2 3/4 1 3/4 3/4 1 1-1/4 1 1-1/4 1-1/4 1-1/2 2

Vendor No. C5205X2 C5205X3 C5205X4 C5205X4X4 C5205X4X6 C5205X4X8 C5205X5 C5205X5X4 C5205X5X6 C5205X6X2 C5205X6 C5205X6X6 C5205X6X8 C5205X8X4 C5205X8 C5205X8X8 C5205X8X12 C5205X10X6 C5205X10 C5205X10X12 C5205X12X8 C5205X12 C5205X12X16 C5205X14 C5205X16X12 C5205X16 C5205X16X20 C5205X20X16 C5205X20 C5205X24X20 C5205x24 C5205X32

Part No. 423000-131280 423001-131280 423002-131280 423003-131280 423004-131280 423005-131280 423006-131280 423007-131280 423008-131280 423009-131280 423010-131280 423011-131280 423012-131280 423013-131280 423014-131280 423015-131280 423016-131280 423017-131280 423018-131280 423019-131280 423020-131280 423021-131280 423022-131280 423023-131280 423024-131280 423025-131280 423026-131280 423027-131280 423028-131280 423029-131280 423030-131280 423031-131280

Utility Price /Each $2.58 2.00 1.03 1.08 2.53 4.92 1.47 1.65 2.59 1.39 1.11 1.62 2.82 2.23 1.75 2.88 4.60 3.60 2.58 4.02 4.31 4.09 6.28 6.59 6.01 6.34 13.53 12.44 10.43 27.78 18.29 51.17

Part No. 420650 420651 420652 420653 420654 420655 420656 420657 420658 420659 420660 420661 420662 420663 420664 420665 420666 420667 420668 420669 420670 420671 420672 420673 420674 420675 420676 420677 420678 420679 420680 420681

Price /Each $1.76 1.03 0.57 0.78 1.40 3.40 0.85 0.93 1.84 0.88 0.75 1.11 1.52 1.40 1.14 1.54 2.89 2.18 1.95 2.76 2.94 2.69 4.53 4.70 4.41 3.91 9.61 9.47 7.38 18.13 12.36 30.00

10-69 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

High Pressure Pipe & 37° JIC Fittings

High Pressure Stainless Steel Pipe Fittings Cont.

10_pHyd_43-96.qxd

3/11/07

2:20 PM

Page 70

STEEL SAE 37° (JIC) FLARE-TWIN Steel SAE 37° (JIC) Flare-Twin Cont.

2-Piece Nut Long

37° JIC Fittings

3-Piece Sleeve

Weatherhead Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2

Vendor No. C5165X2 C5165X3 C5165X4 C5165X5 C5165X6 C5165X8 C5165X10 C5165X12 C5165X14 C5165X16 C5165X20 C5165X24 C5165X32

Part No. 423032-131280 423033-131280 423034-131280 423035-131280 423036-131280 423037-131280 423038-131280 423039-131280 423040-131280 423041-131280 423042-131280 423043-131280 423044-131280

Utility Price /Each $0.58 0.57 0.50 0.55 0.60 0.62 0.72 1.08 2.19 1.82 4.85 8.02 22.68

Part No.

Price /Each

420683 420684 420685 420686 420687 420688 420689 420690 420691 420692

$0.33 0.35 0.39 0.39 0.45 0.52 0.64 1.17 1.09 2.40

3-Piece Nut

Weatherhead Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2

Vendor No. C5105X2 C5105X3 C5105X4 C5105X5 C5105X6 C5105X8 C5105X10 C5105X12 C5105X14 C5105X16 C5105X20 C5105X24 C5105X32

Part No. 423045-131280 423046-131280 423047-131280 423048-131280 423049-131280 423050-131280 423051-131280 423052-131280 423053-131280 423054-131280 423055-131280 423056-131280 423057-131280

Utility Price /Each $0.61 0.61 0.65 0.69 0.65 1.11 1.31 2.32 3.22 3.32 14.96 10.18 36.57

Part No.

Price /Each

420696 420697 420698 420699 420700 420701 420702 420703 420704 420705 420706 420707

$0.41 0.31 0.36 0.41 0.62 0.98 1.34 2.30 2.22 4.28 6.51 22.38

2-Piece Nut Short

Weatherhead Tube O.D. 1/4 5/16 3/8 1/2 5/8 3/4

Vendor No. C5125X4 C5125X5 C5125X6 C5125X8 C5125X10 C5125X12

Part No. 423058-131280 423059-131280 423060-131280 423061-131280 423062-131280 423063-131280

Utility Price /Each $1.11 1.17 0.93 1.57 2.43 3.73

10-70 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 420708 420709 420710 420711 420712

Price /Each $0.62 1.28 0.69 1.29 3.87

Vendor No. C5115X4 C5115X5 C5115X6 C5115X8 C5115X10 C5115X12

Tube O.D. 1/4 5/16 3/8 1/2 5/8 3/4

Price /Each $0.98 0.98 1.05 1.42 2.66 4.77

Part No. 423064-131280 423065-131280 423066-131280 423067-131280 423068-131280 423069-131280

Bulkhead Nut

Weatherhead

Utility

Tube O.D. 1/8 3/16 1/4

Vendor No.

Part No.

Price /Each

C5924X3 C5924X4

423075-131280 423076-131280

$2.82 0.86

5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4

C5924X5 C5924X6 C5924X8 C5924X10 C5924X12 C5924X14 C5924X16 C5924X20

423077-131280 423078-131280 423079-131280 423080-131280 423081-131280 423082-131280 423083-131280 423084-131280

0.94 0.86 1.05 1.03 2.10 4.51 3.66 3.75

Vendor No. C5129X2 C5129X3 C5129X4 C5129X5 C5129X6 C5129X8 C5129X10 C5129X12 C5129X16 C5129X20 C5129X24 C5129X32

Part No. 423087-131280 423088-131280 423089-131280 423090-131280 423091-131280 423092-131280 423093-131280 423094-131280 423095-131280 423096-131280 423097-131280 423098-131280

Part No. 420724 420725 420726

Price /Each $2.67 1.98 0.36

420727 420728 420729 420730 420731 420732 420733

0.54 0.55 0.50 0.72 1.33 2.48 2.02

Cap

Weatherhead Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2

Utility Price /Each $2.11 2.11 0.88 1.11 1.22 1.18 2.28 2.95 5.18 12.55 24.89 93.25

Part No. 420737 420738 420739 420740 420741 420742 420743 420744 420745 420746 420747 420748

Price /Each $1.85 1.70 0.59 0.75 0.89 1.03 1.65 2.48 3.76 8.24 15.45 37.86

10_pHyd_43-96.qxd

3/11/07

2:20 PM

Page 71

STEEL SAE 37° (JIC) FLARE-TWIN Small Hex Union

Plug Weatherhead

Weatherhead Vendor No. C5229X4 C5229X5 C5229X6 C5229X8 C5229X10 C5229X12 C5229X14 C5229X16 C5229X20 C5229X24 C5229X32

Tube O.D. 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2

Part No. 423099-131280 423100-131280 423101-131280 423102-131280 423103-131280 423104-131280 423105-131280 423106-131280 423107-131280 423108-131280 423109-131280

Utility Price /Each $0.99 1.20 1.13 1.53 2.13 2.62 8.05 4.64 8.86 26.30 93.21

Price /Each $0.62 0.88 0.72 1.28 1.70 2.27 5.57 3.30 6.30 18.56 39.63

Part No. 420749 420750 420751 420752 420753 420754 420755 420756 420757 420758 420759

Reducer Use with 3-Piece Nut Size A denotes Female Tube O.D. Size B denotes Male Tube O.D.

Tube O.D. 1/8 x1/8 3/16 x3/16 1/4 x1/4 5/16 x1/4 5/16 x5/16 3/8 x1/4 3/8 x5/16 3/8 x3/8 1/2 x3/8 1/2 x1/2 5/8 x1/2 5/8 x5/8 3/4 x1/2 3/4 x5/8 3/4 x3/4 7/8 x7/8 1 x3/4 1x1 1-1/4 x 1-1/4 1-1/2 x 1-1/2 2x2

Vendor No. C5305X2 C5305X3 C5305X4 C5305X5X4 C5305X5 C5305X6X4 C5305X6X5 C5305X6 C5305X8X6 C5305X8 C5305X10X8 C5305X10 C5305X12X8 C5305X12X10 C5305X12 C5305X14 C5305X16X12 C5305X16 C5305X20 C5305X24 C5305X32

Part No. 423132-131280 423133-131280 423134-131280 423135-131280 423136-131280 423137-131280 423138-131280 423139-131280 423140-131280 423141-131280 423142-131280 423143-131280 423144-131280 423145-131280 423146-131280 423147-131280 423148-131280 423149-131280 423150-131280 423151-131280 423152-131280

Utility Price /Each $10.97 5.87 1.63 6.95 2.19 3.44 10.26 1.63 5.92 2.70 6.71 3.00 5.86 8.35 5.41 7.47 10.40 7.92 14.83 30.00 76.07

Part No. 420782 420783 420784 420785 420786 420787 420788 420789 420790 420791 420792 420793 420794 420795 420796 420797 420798 420799 420800 420801 420802

Price /Each $8.28 4.51 0.97 9.35 1.45 1.70 7.36 1.15 2.48 1.52 2.89 2.70 5.33 4.17 3.07 5.50 7.21 3.99 7.11 16.38 52.92

Large Hex Union Weatherhead Size A 3/8 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 3/4 7/8 7/8 1 1 1 1 1-1/4 1-1/4 1-1/2 2

Size B 1/4 1/4 3/8 1/4* 3/8* 1/2* 1/4 3/8 1/2 5/8* 1/2* 3/4* 1/2* 5/8* 3/4 7/8* 3/4 1* 1-1/4* 1-1/2*

Utility

Vendor No. C5015X6X4 C5015X8X4 C5015X8X6 C5015X10X4 C5015X10X6 C5015X10X8 C5015X12X4 C5015X12X6 C5015X12X8 C5015X12X10 C5015X14X8 C5015X14X12 C5015X16X8 C5015X16X10 C5015X16X12

Part No. 423110-131280 423111-131280 423112-131280 423113-131280 423114-131280 423115-131280 423116-131280 423117-131280 423118-131280 423119-131280 423121-131280 423123-131280 423124-131280 423125-131280 423126-131280

Price /Each $2.59 4.77 3.16 7.09 5.18 3.18 9.54 8.43 5.64 6.14 15.70 13.89 14.65 13.14 10.62

C5015X20X12 C5015X20X16 C5015X24X20 C5015X32X24

423128-131280 423129-131280 423130-131280 423131-131280

20.46 22.20 48.25 115.75

Part No. 420760 420761 420762 420763

Price /Each $1.66 3.04 2.03 5.18

420765 420766 420767 420768 420769

2.73 5.93 5.71 4.10 4.28

420774 420775 420776 420777 420778 420779 420780

10.26 9.90 8.13 12.00 16.80 15.90 34.28

Tube O.D. 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4

Vendor No. C5306x4 C5306x5 C5306x6 C5306x8 C5306x10 C5306x12 C5306x16 C5306x20

Part No. 423153-131280 423154-131280 423155-131280 423156-131280 423157-131280 423158-131280 423159-131280 423160-131280

Price /Each $2.88 10.17 2.05 3.67 5.24 7.48 11.63 36.56

*1 piece design - not used with 3-piece nut.

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

10-71 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

37° JIC Fittings

Steel SAE 37° (JIC) Flare-Twin Cont.

10_pHyd_43-96.qxd

3/11/07

2:21 PM

Page 72

STEEL SAE 37° (JIC) FLARE-TWIN Steel SAE 37° (JIC) Flare-Twin Cont.

Female Connector

37° JIC Fittings

Bulkhead Union Weatherhead

Weatherhead Tube O.D. 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4

Vendor No. C5325x3 C5325x4 C5325x5 C5325x6 C5325x8 C5325x10 C5325x12 C5325x16 C5325x20

Part No. 423171-131280 423172-131280 423173-131280 423174-131280 423175-131280 423176-131280 423177-131280 423178-131280 423179-131280

Utility Price /Each $19.60 4.40 4.79 3.56 5.46 7.09 12.45 18.30 34.77

Price /Each $19.45 2.43 3.34 2.66 3.20 5.40 6.49 10.85

Part No. 420821 420822 420823 420824 420825 420826 420827 420828

Straight Thread O-Ring Connector

Weatherhead Tube O.D. 1/8 3/16 1/4 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 3/4 3/4 3/4 3/4 3/4 3/4 7/8 1 1 1 1 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2

Port 1/8 3/16 1/4 5/16 3/8 1/2 1/4 5/16 3/8 1/4 5/16 3/8 1/2 5/8 3/8 1/2 5/8 3/4 1/2 5/8 3/4 1 1/2 5/8 3/4 7/8 1 1-1/4 7/8 5/8 3/4 1 1-1/4 1 1-1/4 1-1/2 1-1/4 1-1/2 2

Vendor No. C5315X2 C5315X3 C5315X4 C5315X4X5 C5315X4X6 C5315X4X8 C5315X5X4 C5315X5 C5315X5X6 C5315X6X4 C5315X6X5 C5315X6 C5315X6X8 C5315X6X10 C5315X8X6 C5315X8X8 C5315X8X10 C5315X8X12 C5315X10X8 C5315X10 C5315X10X12 C5315X10X16 C5315X12X8 C5315X12X10 C5315X12 C5315X12X14 C5315X12X16 C5315X12X20 C5315X14 C5315X16X10 C5315X16X12 C5315X16 C5315X16X20 C5315X20X16 C5315X20 C5315X20X24 C5315X24X20 C5315X24 C5315X24X32

Part No. 424000-131280 424001-131280 424002-131280 424003-131280 424004-131280 424005-131280 424006-131280 424007-131280 424008-131280 424009-131280 424010-131280 424011-131280 424012-131280 424013-131280 424014-131280 424015-131280 424016-131280 424017-131280 424018-131280 424019-131280 424020-131280 424021-131280 424022-131280 424023-131280 424024-131280 424025-131280 424026-131280 424027-131280 424028-131280 424029-131280 424030-131280 424031-131280 424032-131280 424033-131280 424034-131280 424035-131280 424036-131280 424037-131280 424038-131280

10-72 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Each $8.07 8.94 1.24 4.34 2.82 4.32 5.13 1.99 2.63 2.46 3.07 1.64 2.87 3.71 3.50 2.75 3.35 5.39 3.84 3.70 5.78 13.53 5.56 5.42 5.26 8.05 7.97 20.09 7.05 13.50 7.36 8.04 15.00 16.81 15.53 34.38 29.24 20.69 110.25

Tube O.D. 1/8 3/16 1/4 1/4 5/16 5/16 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4 7/8 1 1-1/4 1-1/2 2

FPT 1/8 1/8 1/8 1/4 1/8 1/4 1/4 3/8 3/8 1/2 3/8 1/2 1/2 3/4 3/4 1 1-1/4 1-1/2 2

Vendor No. C5255X2 C5255X3 C5255X4 C5255X4X4 C5255X5 C5255X5X4 C5255X6 C5255X6X6 C5255X8 C5255X8X8 C5255X10X6 C5255X10 C5255X12X8 C5255X12 C5255X14 C5255X16 C5255X20 C5255X24 C5255X32

Utility Price /Each $9.12 4.99 1.63 3.40 2.65 2.55 1.99 3.38 2.49 4.72 6.41 4.69 9.49 6.37 6.42 9.54 23.40 51.15 94.71

Part No. 423180-131280 423181-131280 423182-131280 423183-131280 423184-131280 423185-131280 423186-131280 423187-131280 423188-131280 423189-131280 423190-131280 423191-131280 423192-131280 423193-131280 423194-131280 423195-131280 423196-131280 423197-131280 423198-131280

Part No. 420830 420831 420832 420833

Price /Each $5.54 6.55 0.77 1.28

420835 420836 420837 420838 420839 420840 420841 420842 420843 420844 420845 420846

2.15 1.03 1.93 1.63 2.72 4.07 2.56 6.44 3.51 6.38 5.71 13.03

Adapter

Utility Part No.

Price /Each

421313 421314 421315 421316

0.89 3.34 1.61 3.04

421322 421323 421324 421325 421326 421327 421328 421329 421330 421331 421332

1.40 1.56 2.56 2.10 1.64 2.40 3.61 2.57 2.57 3.90 7.48

421334 421335

3.77 3.46

421337

5.58

421341 421342

5.30 4.83

421344 421345

4.69 11.58

Tube O.D. 1/4 5/16 3/8 1/2

Thread 7/16-24 Inverted 1/2-20 Inverted 5/8-18 Inverted 3/4-18 Inverted

Vendor No. C5880X4 C5880X5 C5880X6 C5880X8

Price /Each $4.08 7.16 10.32 16.07

Part No. 423199-131280 423200-131280 423201-131280 423202-131280

Female Bulkhead Connector

Tube O.D. 1/4 3/8 1/2 5/8 3/4 1

FPT 1/8 1/4 3/8 1/2 3/4 1

Vendor No. C5275X4 C5275X6 C5275X8 C5275X10 C5275X12 C5275X16

Price /Each $6.97 9.24 13.17 15.73 24.31 29.24

Part No. 423203-131280 423204-131280 423205-131280 423206-131280 423207-131280 423208-131280

Straight Thread O-Ring Extended Connector

Weatherhead Tube O.D. 1/4 3/8 1/2 3/4 1

Port 1/4 3/8 1/2 3/4 1

Vendor No. C5316X4 C5316X6 C5316X8 C5316X12 C5316X16

Part No. 423209-131280 423210-131280 423211-131280 423213-131280 423214-131280

Utility Price /Each $5.14 3.53 6.23 14.29 23.43

Part No.

Price /Each

420860 420861 420863 420864

3.19 5.09 14.30 19.97

10_pHyd_43-96.qxd

3/11/07

2:21 PM

Page 73

STEEL SAE 37° (JIC) FLARE-TWIN Steel SAE 37° (JIC) Flare-Twin Cont.

45° Male Elbow

37° Female Swivel to Male O-Ring Weatherhead

Weatherhead Tube O.D. 1/4 1/4 3/8 3/8 1/2 5/8 3/4 1 1-1/4

Port 1/4 3/8 3/8 1/2 1/2 5/8 3/4 1 1-1/4

Vendor No. C5216X4X4 C5216X4X6 C5216X6X6 C5216X6X8 C5216X8X8 C5216X10X10 C5216X12X12 C5216X16X16 C5216X20X20

Part No. 423216-131280 423217-131280 423218-131280 423219-131280 423220-131280 423221-131280 423222-131280 423223-131280 423224-131280

Utility Price /Each $8.20 8.79 9.69 10.64 10.69 14.22 15.15 27.43 45.90

Part No. 420866

Price /Each $6.70

420868

6.46

420870 420871 420872 420873

7.30 8.06 9.12 18.67

Female 37° JIC Swivel to Female Pipe

Weatherhead Tube O.D. 1/4 3/8 1/2 3/4 1

FPT 1/4 3/8 1/2 3/4 1

Vendor No. C5256X4X4 C5256X6X6 C5256X8X8 C5256X12 C5256X16

Part No. 423227-131280 423228-131280 423229-131280 423230-131280 423231-131280

Tube O.D. 1/8 1/4 1/4 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 1 1 1-1/4 1-1/2 2

MPT 1/8 1/8 1/4 1/8 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 3/4 1/2 3/4 1 3/4 1 1-1/4 1-1/2 2

Vendor No. TF5355X2 TF5355X4 TF5355X4X4 TF5355X5 TF5355X6X2 TF5355X6 TF5355X6X6 TF5355X6X8 TF5355X8X4 TF5355X8 TF5355X8X8 F5355X10X6 TF5355X10 TF5355X10X12 F5355X12X8 TF5355X12 F5355X12X16 F5355X16X12 TF5355X16 TF5355X20 TF5355X24 TF5355X32

Part No. 423232-131280 423233-131280 423234-131280 423235-131280 423237-131280 423238-131280 423239-131280 423240-131280 423241-131280 423242-131280 423243-131280 423244-131280 423245-131280 0447698 423246-131280 423247-131280 423248-131280 423249-131280 423250-131280 423251-131280 423252-131280 423253-131280

Price /Each $13.55 4.77 4.87 6.61 5.57 4.95 6.15 7.18 7.12 5.74 6.90 9.53 7.70 8.45 10.60 10.49 16.81 17.55 15.61 27.71 38.38 115.79

Utility Part No.

Price /Each

420884

3.15

420888 420889 420890

3.05 3.96 5.49

420892 420893 420894

3.71 4.38 6.65

420897 420898 420899 420900 420901 420902 420903

5.93 11.47 12.27 9.60 20.77 33.61 79.51

Utility Price /Each $10.99 11.69 11.35 14.06 19.85

Part No. 420877 420878 420879 420880 420881

Price /Each $6.39 4.79 5.00 8.19 15.97

45° Male Elbow Forged

Weatherhead Tube O.D. 3/16 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 1 1 1-1/2

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

MPT 1/8 1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 1/2 3/4 3/4 1 1-1/2

Vendor No. C5355X3 C5355X4 C5355X4X4 C5355X5 C5355X5X4 C5355X6X2 C5355X6 C5355X6X6 C5355X6X8 C5355X8X4 C5355X8 C5355X8X8 C5355X10X6 C5355X10 C5355X12X8 C5355X12 C5355X16X12 C5355X16 C5355X24

Part No. 423912-131280 423913-131280 423914-131280 423915-131280 423916-131280 423917-131280 423918-131280 423919-131280 423920-131280 423921-131280 423922-131280 423923-131280 423924-131280 423925-131280 423926-131280 423927-131280 423928-131280 423929-131280 423930-131280

Utility Price /Each $7.59 5.15 6.61 6.66 7.51 7.45 6.46 7.85 8.50 8.45 8.08 9.39 10.45 9.53 15.75 13.31 18.50 21.93 45.84

Part No. 421670 421671 421672 421673 421674 421675 421676 421677 421678 421679 421680 421681 421682 421683 421684 421685 421686

Price /Each $6.69 3.13 3.17 4.75 3.43 5.22 2.99 3.90 5.05 5.26 3.87 4.38 7.14 5.05 8.04 8.95 12.16

10-73 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

37° JIC Fittings

Brazed

10_pHyd_43-96.qxd

3/11/07

2:21 PM

Page 74

STEEL SAE 37° (JIC) FLARE-TWIN Steel SAE 37° (JIC) Flare-Twin Cont.

Straight Thread O-Ring 45° Elbow Brazed

37° JIC Fittings

Swivel Nut 45° Elbow Brazed Weatherhead

Weatherhead Tube O.D. 1/4 3/8 1/2 5/8 3/4 1 1-1/4

Vendor No. TF5356X4 TF5356X6 TF5356X8 TF5356X10 TF5356X12 TF5356X16 TF5356X20

Utility Price /Each $5.82 5.75 6.81 10.10 15.29 23.09 35.83

Part No. 423254-131280 423256-131280 423257-131280 423258-131280 423259-131280 423260-131280 423261-131280

Part No. 420904

Price /Each $3.59

420907

4.69

420909 420910 420911

8.76 13.39 26.78

Swivel Nut 45° Elbow Forged

Tube O.D. 1/4 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 3/4 7/8 1 1-1/4 1-1/2

Port 1/4 3/8 1/2 3/8 1/2 5/8 5/8 3/4 5/8 3/4 1 7/8 1 1-1/4 1-1/2

Vendor No. TF5365X4 TF5365X6 TF5365X6X8 TF5365X8X6 TF5365X8 TF5365X8X10 TF5365X10 TF5365X10X12 TF5365X12X10 TF5365X12 TF5365X12X16 TF5365X14 TF5365X16 TF5365X20 TF5365X24

Part No. 423271-131280 423273-131280 423274-131280 423275-131280 423276-131280 423277-131280 423279-131280 0447699 423280-131280 423281-131280 423282-131280 423283-131280 423285-131280 423286-131280 423287-131280

Utility Price /Each $6.04 6.96 8.49 10.97 8.55 10.27 9.51 18.57 15.35 15.23 24.51 23.40 22.16 36.56 59.94

Part No.

Price /Each

420924 420925

6.96 5.60

420928

6.94

420929 420930

10.72 9.17

Straight Thread O-Ring 45° Elbow Forged Weatherhead Tube O.D. 1/4 3/8 1/2 5/8 3/4 7/8 1

Vendor No. C5356X4 C5356X6 C5356X8 C5356X10 C5356X12 C5356X14 C5356X16

Part No. 423931-131280 423932-131280 423933-131280 423934-131280 423935-131280 423936-131280 423937-131280

Utility Price /Each $6.86 8.16 9.98 15.27 18.30 31.20 26.88

Part No. 421689 421690 421691 421692 421693

Price /Each $3.76 3.61 4.43 6.60 8.50

421695

14.01

45° Bulkhead Union Elbow

Tube O.D. 1/4 5/16 3/8 1/2 5/8 3/4 1

Vendor No. TF5375X4 TF5375X5 TF5375X6 TF5375X8 TF5375X10 TF5375X12 TF5375X16

Part No. 423264-131280 423265-131280 423266-131280 423267-131280 423268-131280 423269-131280 423270-131280

Price /Each $7.57 8.43 8.65 10.96 14.25 18.29 26.50

Weatherhead Tube O.D. 1/4 5/16 3/8 1/2 1/2 5/8 3/4 3/4 1 1-1/4

Port 1/4 5/16 3/8 1/2 5/8 5/8 5/8 3/4 1 1-1/4

Vendor No. C5365X4 C5365X5 C5365X6 C5365X8 C5365X8X10 C5365X10 C5365X12X10 C5365X12 C5365X16 C5365X20

Part No. 423699-131280 423700-131280 423701-131280 423702-131280 423703-131280 423704-131280 423705-131280 423706-131280 423707-131280 423708-131280

Utility Price /Each $8.31 9.50 9.45 10.23 19.05 16.83 28.15 23.41 34.36 59.92

Part No. 421698 421699 421700 421701 421702 421703 421704

Price /Each $3.92 6.23 4.43 6.11 7.63 6.70 11.09

421706

16.37

90° Union Elbow Brazed

Weatherhead Tube O.D. 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2

10-74 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Vendor No. TF5505X4 TF5505X5 TF5505X6 TF5505X8 TF5505X10 TF5505X12 TF5505X16 TF5505X20 TF5505X24

Part No. 423289-131280 423290-131280 423291-131280 423292-131280 423293-131280 423294-131280 423296-131280 423297-131280 423298-131280

Utility Price /Each $4.06 4.32 4.63 5.51 7.82 10.97 18.15 30.31 49.74

Part No. 420938 420939

Price /Each $2.02 3.05

420941 420942 420943

3.46 4.01 7.56

420946 420947 420948

20.01 33.04 115.24

10_pHyd_43-96.qxd

3/11/07

2:21 PM

Page 75

STEEL SAE 37° (JIC) FLARE-TWIN Steel SAE 37° (JIC) Flare-Twin Cont.

Swivel Nut 90° Elbow

90° Union Elbow Forged Weatherhead

Weatherhead Tube O.D. 1/4 3/8 1/2 5/8 3/4 1

Vendor No. C5505X4 C5505X6 C5505X8 C5505X10 C5505X12 C5505X16

Utility Price /Each $4.69 5.67 7.04 8.93 13.18 18.80

Part No. 423940-131280 423941-131280 423942-131280 423943-131280 423944-131280 423945-131280

Price /Each $2.07 2.68 3.57 4.21 7.73 11.08

Part No. 421709 421710 421711 421712 421713 421714

Weatherhead Part No. 423300-131280 423301-131280 423302-131280 423303-131280 423305-131280 423306-131280 423307-131280

Part No. 420949

Price /Each $3.51

420951 420952

3.97 5.82

420954

12.26

Forged

Vendor No. C5525X4 C5525X6 C5525X8 C5525X12 C5525X16

Utility Price /Each $6.37 7.19 7.34 9.16 11.58 16.25 28.13 50.71

Weatherhead

Utility Price /Each $5.87 7.71 6.22 8.40 11.35 17.18 24.17

Bulkhead Union Elbow

Tube O.D. 1/4 3/8 1/2 3/4 1

Part No. 423992-131280 423993-131280 423994-131280 423995-131280 423996-131280 423997-131280 423998-131280 423999-131280

Part No. 421028

Price /Each $2.68

421030 421031

2.99 4.12

421033 421035 421036 421037

8.49 14.14 29.62 46.02

Brazed

Brazed

Tube O.D. 1/4 5/16 3/8 1/2 5/8 3/4 1

Vendor No. C5506X4 C5506X5 C5506X6 C5506X8 C5506X10 C5506X12 C5506X16 C5506X20

90° Male Elbow

Bulkhead Union Elbow

Vendor No. TF5525X4 TF5525X5 TF5525X6 TF5525X8 TF5525X10 TF5525X12 TF5525X16

Tube O.D. 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2

Part No. 423946-131280 423947-131280 423948-131280 423950-131280 423951-131280

Price /Each $9.11 9.34 12.33 26.50 33.99

Swivel Nut 90° Elbow Brazed

Tube O.D. 1/4 5/16 3/8 1/2

Vendor No. TF5506X4 TF5506X5 TF5506X6 TF5506X8

Part No. 423380-131280 423381-131280 423382-131280 423383-131280

Price /Each $4.65 5.30 5.15 7.03

5/8 3/4 7/8 1 1-1/4 1-1/2

TF5506X10 TF5506X12 TF5506X14 TF5506X16 TF5506X20 TF5506X24

423384-131280 423385-131280 423386-131280 423387-131280 423388-131280 423389-131280

9.35 13.39 21.58 22.26 41.83 61.41

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Tube O.D. 1/4 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 7/8 1 1 1 1-1/4 1-1/4 1-1/4 1-1/2 2

MPT 1/8 1/4 3/8 1/2 1/8 1/4 3/8 1/8 1/4 3/8 1/2 3/4 1/4 3/8 1/2 3/4 3/8 1/2 3/4 1/2 3/4 1 3/4 3/4 1 1-1/4 1 1-1/4 1-1/2 1-1/2 2

Vendor No. TF5405X4 TF5405X4X4 TF5405X4X6 TF5405X4X8 TF5405X5 TF5405X5X4 TF5405X5X6 TF5405X6X2 TF5405X6 TF5405X6X6 TF5405X6X8 TF5405X6X12 TF5405X8X4 TF5405X8 TF5405X8X8 TF5405X8X12 TF5405X10X6 TF5405X10 TF5405X10X12 TF5405X12X8 TF5405X12 TF5405X12X16 TF5405X14 TF5405X16X12 TF5405X16 TF5405X16X20 TF5405X20X16 TF5405X20 TF5405X20X24 TF5405X24 TF5405X32

Part No. 423308-131280 423309-131280 423310-131280 423311-131280 423312-131280 423313-131280 423314-131280 423315-131280 423316-131280 423317-131280 423318-131280 0447701 423319-131280 423320-131280 423321-131280 423322-131280 423323-131280 423324-131280 423325-131280 423326-131280 423327-131280 423328-131280 423329-131280 423330-131280 423331-131280 423332-131280 423333-131280 423334-131280 423335-131280 423337-131280 423338-131280

Utility Price /Each $3.25 3.84 5.13 7.04 4.04 3.97 6.30 4.34 3.70 8.04 6.58 15.51 5.59 5.32 6.68 9.97 6.95 7.28 10.33 10.62 10.42 15.37 14.97 15.74 17.32 32.96 32.16 32.94 49.72 47.30 97.67

Part No. 420956 420957 420958 420959

Price /Each $1.91 2.35 3.63 4.43

420961 420962 420963 420964 420965 420966

2.73 4.68 2.87 2.17 3.09 3.87

420967 420968 420969 420970

4.05 4.86 3.92 6.15

420973 420974 420975 420976

6.81 6.34 6.85 10.51

420978 420979 420980 420981 420982 420983 420985 420986

10.05 11.07 22.61 23.45 21.13 34.59 29.33 64.31

10-75 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

37° JIC Fittings

Forged

10_pHyd_43-96.qxd

3/11/07

2:21 PM

Page 76

STEEL SAE 37° (JIC) FLARE-TWIN Steel SAE 37° (JIC) Flare-Twin Cont.

90° Male Elbow Extra Long Brazed

37° JIC Fittings

90° Male Elbow Forged Weatherhead

Weatherhead Tube O.D. 1/8 3/16 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 1 1 1-1/4 1-1/4 1-1/2 2

MPT 1/8 1/8 1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4 3/8 1/2 3/4 1/2 3/4 3/4 1 1 1-1/4 1-1/2 2

Vendor No. C5405X2 C5405X3 C5405X4 C5405X4X4 C5405X5 C5405X5X4 C5405X6X2 C5405X6 C5405X6X6 C5405X6X8 C5405X8X4 C5405X8 C5405X8X8 C5405X8X12 C5405X10X6 C5405X10 C5405X10X12 C5405X12X8 C5405X12 C5405X16X12 C5405X16 C5405X20X16 C5405X20 C5405X24 C5405X32

Utility Price /Each $9.10 5.73 4.14 4.71 5.38 5.59 7.06 5.18 6.25 9.33 8.23 6.37 9.16 15.23 10.17 8.72 11.94 13.03 11.67 25.77 21.95 40.98 33.65 55.58 97.50

Part No. 423953-131280 423954-131280 423955-131280 423956-131280 423957-131280 423958-131280 423959-131280 423960-131280 423961-131280 423962-131280 423963-131280 423964-131280 423965-131280 423966-131280 423967-131280 423968-131280 423969-131280 423970-131280 423971-131280 423972-131280 423973-131280 423974-131280 423975-131280 423976-131280 423977-131280

Part No. 421715 421716 421717 421718 421719 421720 421721 421722 421723 421724 421725 421726 421727 421728 421729 421730 421731 421732 421733 421734 421735 421736 421737

Price /Each $6.28 4.16 2.01 2.42 2.32 2.84 2.99 2.70 3.33 4.24 4.11 3.56 3.87 6.43 4.37 4.64 6.70 6.65 7.08 9.79 11.21 22.15 22.45

90° Male Elbow Long Brazed

Utility

Tube O.D. 1/4 1/4 5/16 3/8 3/8 1/2

MPT 1/8 1/4 1/4 1/4 3/8 3/8

Vendor No. TF5435X4 TF5435X4X4 TF5435X5X4 TF5435X6 TF5435X6X6 TF5435X8

Part No. 423353-131280 423354-131280 423356-131280 423357-131280 0447703 423358-131280

Price /Each $6.10 6.52 8.81 6.78 10.98 8.93

1/2 5/8 3/4 1 1-1/4

1/2 1/2 3/4 1 1-1/4

TF5435X8X8 TF5435X10 TF5435X12 TF5435X16 TF5435X20

423359-131280 423360-131280 423361-131280 423363-131280 423364-131280

11.36 12.06 17.57 30.71 85.38

Part No. 421001 421002

Price /Each $4.12 4.47

421006

5.87

421007 421008 421009 421011

7.47 8.19 12.00 22.18

90° Female Elbow Brazed

Weatherhead Tube O.D. 1/4 1/4 5/16 3/8 3/8 1/2 1/2 3/4 1 1-1/4 1-1/2

FPT 1/8 1/4 1/8 1/4 3/8 3/8 1/2 3/4 1 1-1/4 1-1/2

Vendor No. TF5455X4 TF5455X4X4 TF5455X5 TF5455X6 TF5455X6X6 TF5455X8 TF5455X8X8 TF5455X12 TF5455X16 TF5455X20 TF5455X24

Part No. 423365-131280 423366-131280 423367-131280 423369-131280 423370-131280 423371-131280 423372-131280 423374-131280 423376-131280 423377-131280 423378-131280

Utility Price /Each $3.97 4.62 5.11 4.38 6.03 6.31 9.35 13.90 21.59 42.40 62.58

Part No. 421013 421014 421015 421017 421018

Price /Each $2.63 3.55 3.68 2.99 3.96

421020 421022 421024 421025

6.18 9.27 13.91 28.77

90° Female Elbow Forged

Tube O.D. 1/4 1/4 5/16 3/8 3/8 1/2 1/2 1/2 5/8 3/4 1 1-1/4

MPT 1/8 1/4 1/4 1/4 3/8 3/8 1/2 3/4 1/2 3/4 1 1-1/4

Vendor No. TF5425X4 TF5425X4X4 TF5425X5X4 TF5425X6 TF5425X6X6 TF5425X8 TF5425X8X8 F5425X8X12 TF5425X10 TF5425X12 TF5425X16 TF5425X20

Part No. 423339-131280 423340-131280 423341-131280 423342-131280 423343-131280 423344-131280 423345-131280 423346-131280 423347-131280 423348-131280 423350-131280 423351-131280

Price /Each $5.78 6.23 6.61 6.30 9.87 8.65 11.00 17.64 12.08 16.22 23.39 61.63

90° Male Elbow Long Forged

Tube O.D. 3/8 3/4

MPT 1/4 3/4

Vendor No. C5425X6 C5425X12

Part No. 423978-131280 423979-131280

10-76 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Each $8.70 23.00

Weatherhead Tube O.D. 1/4 3/8 3/8 3/8 1/2 1/2 1/2 5/8 3/4 3/4 7/8 1

FPT 1/8 1/8 1/4 3/8 1/4 3/8 1/2 1/2 1/2 3/4 3/4 1

Vendor No. C5455X4 C5455X6X2 C5455X6 C5455X6X6 C5455X8X4 C5455X8 C5455X8X8 C5455X10 C5455X12X8 C5455X12 C5455X14 C5455X16

Part No. 423980-131280 423981-131280 423982-131280 423983-131280 423984-131280 423985-131280 423986-131280 423987-131280 423988-131280 423989-131280 423990-131280 423991-131280

Utility Price /Each $6.02 8.87 7.15 10.40 11.71 10.68 14.34 15.01 20.86 23.06 25.70 28.97

Part No. 421742

Price /Each $2.84

421744 421745 421746 421747 421748 421749

3.30 4.01 8.36 4.21 6.03 7.72

421751

9.91

421753

15.20

10_pHyd_43-96.qxd

3/11/07

2:21 PM

Page 77

STEEL SAE 37° (JIC) FLARE-TWIN Steel SAE 37° (JIC) Flare-Twin Cont.

Straight Thread O-Ring 90° Elbow

90° Male Pipe to JIC Swivel Brazed

Weatherhead Tube O.D. 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2

MPT 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2

Vendor No. TF5406X4 TF5406X6 TF5406X8 TF5406X10 TF5406X12 TF5406X16 TF5406X20 TF5406X24

Part No. 423391-131280 423392-131280 423393-131280 423394-131280 423395-131280 423396-131280 423397-131280

Utility Price /Each $4.68 5.52 7.89 9.91 14.36 24.50 48.25

Part No. 421039

Price /Each $3.09

421041 421042 421043 421044 421045 421046

7.52 6.97 10.27 18.31 33.48 50.10

Straight Thread O-Ring 90° Elbow

Tube O.D. 3/16 1/4 5/16 3/8 3/8 1/2 1/2 1/2 5/8 3/4 3/4 7/8 1 1 1-1/4 1-1/2

Port 3/16 1/4 5/16 3/8 1/2 3/8 1/2 5/8 5/8 5/8 3/4 7/8 3/4 1 1-1/4 1-1/2

Vendor No. C5515X3 C5515X4 C5515X5 C5515X6 C5515X6X8 C5515X8X6 C5515X8 C5515X8X10 C5515X10 C5515X12X10 C5515X12 C5515X14 C5515X16X12 C5515X16 C5515X20 C5515X24

Price /Each $11.87 6.54 7.26 7.47 8.38 9.61 8.95 11.39 11.48 20.33 16.35 25.93 26.03 26.68 47.18 68.73

Part No. 423837-131280 423838-131280 423839-131280 423840-131280 423841-131280 423842-131280 423843-131280 423844-131280 423845-131280 423846-131280 423847-131280 423848-131280 423849-131280 423850-131280 423851-131280 423852-131280

Brazed

Straight Thread O-Ring 90° Elbow Long

Weatherhead Tube O.D. 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 3/4 7/8 3/4 1 1 1 1 1-1/4 1-1/4 1-1/2 1-1/2 2

Port 1/4 5/16 3/8 1/4 5/16 3/8 1/4 5/16 3/8 1/2 5/8 3/8 1/2 5/8 3/4 1/2 5/8 3/4 1/2 5/8 3/4 7/8 7/8 1 3/4 7/8 1 1-1/4 1 1-1/4 1-1/4 1-1/2 2

Vendor No. TF5515X4 TF5515X4X5 TF5515X4X6 TF5515X5X4 TF5515X5 TF5515X5X6 TF5515X6X4 TF5515X6X5 TF5515X6 TF5515X6X8 TF5515X6X10 TF5515X8X6 TF5515X8 TF5515X8X10 TF5515X8X12 TF5515X10X8 TF5515X10 TF5515X10X12 TF5515X12X8 TF5515X12X10 TF5515X12 TF5515X12X14 TF5515X14 TF5515X12X16 TF5515X16X12 TF5515X16X14 TF5515X16 TF5515X16X20 TF5515X20X16 TF5515X20 TF5515X24X20 TF5515X24 TF5515X32

Part No. 423400-131280 423401-131280 423402-131280 423403-131280 423404-131280 423405-131280 423406-131280 423407-131280 423408-131280 423409-131280 423410-131280 423411-131280 423412-131280 423413-131280 423414-131280 423415-131280 423416-131280 423417-131280 423418-131280 423419-131280 423420-131280 423421-131280 0400614 423422-131280 423423-131280 423424-131280 423425-131280 423426-131280 423427-131280 423428-131280 423429-131280 423430-131280 423431-131280

Price /Each $5.20 5.77 6.19 6.79 5.48 6.89 5.91 6.88 5.90 7.95 10.10 7.63 7.70 9.30 14.81 9.18 10.11 15.27 12.06 13.91 14.83 24.14 20.53 22.14 20.72 21.93 23.06 38.33 37.17 37.78 48.96 57.86 245.70

Utility Part No. 421048 421049 421050 421051 421052 421053 421054 421055 421056 421057

Price /Each $2.99 4.10 3.96 4.66 3.84 5.00 3.82 4.80 3.46 4.74

421059 421060 421061 421062 421063 421064

4.92 4.54 5.41 8.76 6.38 6.96

421066 421067 421068

8.40 9.91 9.24

Weatherhead Tube O.D. 3/8 1/2 5/8 3/4

Port 3/8 1/2 5/8 3/4

Vendor No. TF5515X6L TF5515X8L TF5515X10L TF5515X12L

Part No. 423432-131280 423433-131280 423434-131280 423435-131280

Utility Price /Each $7.72 10.97 14.03 25.99

Price /Each $4.86 7.24

Part No. 421080 421081

Straight Thread O-Ring 90° Elbow Extra Long

Tube O.D. 3/8 1/2 3/4

Port 3/8 1/2 3/4

Vendor No. TF5515X6LL TF5515X8LL TF5515X12LL

Price /Each $5.21 11.11 15.20

Part No. 421754 421755 421757

Union Tee Brazed

421070 421071

13.51 13.03

421073 421074 421075

14.99 15.71 27.72

421077 421078 421079

42.14 33.99 169.22

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Weatherhead Tube O.D. 1/4 x1/4 x1/4 5/16 x5/16 x5/16 3/8 x3/8 x3/8 1/2 x1/2 x1/2 5/8 x1/2 x1/2 5/8 x5/8 x5/8 5/8 x5/8 x1/2 3/4 x3/4 x3/4 1x1x1 1-1/2 x 1-1/2 x 1-1/2

Vendor No. TF5705X4 TF5705X5 TF5705X6 TF5705X8 TF5705X10X8 TF5705X10 TF5705X10X10X8 TF5705X12 TF5705X16 TF5705X24

Part No. 423440-131280 423441-131280 423442-131280 423443-131280 423444-131280 423445-131280 423446-131280 423447-131280 423449-131280 423451-131280

Price /Each $5.42 5.87 5.70 7.67 11.25 10.20 11.31 15.00 23.40 71.64

Utility Part No. 421084

Price /Each $3.46

421086 421087 421088 421089

3.56 5.72 11.23 6.68

421091 421093 421095

10.36 15.15 52.12

10-77 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

37° JIC Fittings

Forged

10_pHyd_43-96.qxd

3/11/07

2:22 PM

Page 78

STEEL SAE 37° (JIC) FLARE-TWIN Steel SAE 37° (JIC) Flare-Twin Cont.

Swivel Nut Run Tee Brazed

37° JIC Fittings

Union Tee Forged Weatherhead

Weatherhead Tube O.D. 1/8 3/16 1/4 3/8 1/2 5/8 3/4 7/8 1 1-1/4

Vendor No. C5705X2 C5705X3 C5705X4 C5705X6 C5705X8 C5705X10 C5705X12 C5705X14 C5705X16 C5705X20

Utility

Part No. 424600-131280 424601-131280 424602-131280 424603-131280 424604-131280 424605-131280 424606-131280

Price /Each $24.39 16.07 6.98 7.68 11.93 14.13 19.77

424608-131280 424609-131280

30.33 52.63

Part No.

Price /Each

421759 421760 421761 421762 421763 421764 421765 421766

15.56 3.55 3.30 5.15 6.34 9.53 21.55 14.68

Tube O.D. 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2

Vendor No. TF5706X4 TF5706X5 TF5706X6 TF5706X8 TF5706X10 TF5706X12 TF5706X16 TF5706X20 TF5706X24

Part No. 423474-131280 423475-131280 423476-131280 423477-131280 423478-131280 423479-131280 423481-131280 423482-131280 423483-131280

Utility Price /Each $6.94 9.53 7.04 10.47 13.91 21.20 28.91 55.59 72.90

Part No. 421118

Price /Each $4.74

421120 421121

4.74 6.79

421123 421125 421126

12.93 19.16 37.08

Swivel Nut Run Tee Forged

Male Run Tee Brazed Weatherhead

Weatherhead Tube O.D. 1/4 1/4 5/16 3/8 3/8 1/2 1/2 5/8 3/4 1 1-1/4

MPT 1/8 1/4 1/8 1/4 3/8 3/8 1/2 1/2 3/4 1 1-1/4

Vendor No. TF5755X4 TF5755X4X4 TF5755X5 TF5755X6 TF5755X6X6X6 TF5755X8 TF5755X8X8X8 TF5755X10 TF5755X12 TF5755X16 TF5755X20

Utility Price /Each $5.37 7.75 5.78 5.72 8.64 8.40 11.56 10.49 14.99 26.32 48.25

Part No. 423453-131280 423454-131280 423455-131280 423456-131280 423457-131280 423458-131280 423459-131280 423460-131280 423461-131280 423463-131280 423464-131280

Part No.

Price /Each

421098

5.17

421101 421102 421103

6.29 6.40 7.58

Tube O.D. 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4

Vendor No. C5706X4 C5706X5 C5706X6 C5706X8 C5706X10 C5706X12 C5706X16 C5706X20

Part No. 424616-131280 424617-131280 424618-131280 424619-131280 424620-131280 424621-131280 424622-131280 424623-131280

Utility Price /Each $8.98 16.80 12.78 19.63 19.18 26.02 36.55 64.47

Part No. 421774 421775 421776 421777 421778 421779 421780

Price /Each $4.56 6.41 4.26 6.55 8.81 12.28 19.20

Bulkhead Run Tee Brazed

421108

38.04

Weatherhead

Male Run Tee

Tube O.D. 1/2

Forged

Vendor No. TF5726X8

Part No. 423485-131280

Utility Price /Each $26.36

Part No. 421129

Price /Each $18.93

Bulkhead Run Tee Forged Weatherhead Tube O.D. 1/4 3/8 1/2 5/8 3/4 1

MPT 1/8 1/4 3/8 1/2 3/4 1

Utility

Vendor No. C5755X4

Part No. 424610-131280

Price /Each $6.12

C5755X8 C5755X10 C5755X12 C5755X16

424612-131280 424613-131280 424614-131280 424615-131280

10.84 14.13 22.31 33.64

10-78 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 421768 421769 421770 421771

Price /Each $3.61 4.16 6.67 7.47

Tube O.D. 3/8

Vendor No. C5720X6

Part No. 0446814

Price /Each $18.53

10_pHyd_43-96.qxd

3/11/07

2:22 PM

Page 79

STEEL SAE 37° (JIC) FLARE-TWIN Steel SAE 37° (JIC) Flare-Twin Cont.

Male Branch Tee

Straight Thread O-Ring Run Tee Brazed

Weatherhead Tube O.D. 1/4 3/8 1/2 5/8 3/4 7/8 1

Port 1/4 3/8 1/2 5/8 3/4 7/8 1

Vendor No. TF5716X4 TF5716X6 TF5716X8 TF5716X10 TF5716X12 TF5716X14 TF5716X16

Part No. 423486-131280 423488-131280 423489-131280 423490-131280 423491-131280 423492-131280 423493-131280

Utility Price /Each $7.49 7.83 10.97 14.85 20.46 36.45 31.47

Part No.

Price /Each

421134 421135 421136

10.11 14.61 30.92

Tube O.D. 1/4 1/4 5/16 3/8 1/2 5/8 3/4 1

MPT 1/8 1/4 1/8 1/4 3/8 1/2 3/4 1

Vendor No. C5605X4 C5605X4X4X4 C5605X5 C5605X6 C5605X8 C5605X10 C5605X12 C5605X16

Part No. 424624-131280 424625-131280 424626-131280 424627-131280 424628-131280 424629-131280 424630-131280 424631-131280

Price /Each $5.86 7.70 8.30 7.26 10.69 14.04 20.28 35.85

Part No. 423510-131280 423511-131280 423512-131280 423513-131280 423514-131280 423515-131280 423517-131280 423519-131280

Price /Each $8.65 7.68 6.95 9.52 9.50 18.58 19.78 32.89

Female Branch Tee Brazed

Straight Thread O-Ring Run Tee Forged

Tube O.D. 1/4 5/16 3/8 1/2 5/8 3/4 1

Port 1/4 5/16 3/8 1/2 5/8 3/4 1

Vendor No. C5716X4 C5716X5 C5716X6 C5716X8 C5716X10 C5716X12 C5716X16

Price /Each $11.00 14.48 12.06 16.11 24.15 36.57 55.57

Part No. 423780-131280 423781-131280 423782-131280 423783-131280 423784-131280 423785-131280 423786-131280

Tube O.D. 1/4 5/16 3/8 3/8 1/2 1/2 3/4 1

FPT 1/4 1/8 1/4 3/8 3/8 1/2 3/4 1

Vendor No. TF5655X4X4X4 TF5655X5 TF5655X6 TF5655X6X6X6 TF5655X8 TF5655X8X8X8 TF5655X12 TF5655X16

Swivel Nut Branch Tee Brazed

Male Branch Tee Brazed Weatherhead

Weatherhead Tube O.D. 1/4 1/4 5/16 3/8 3/8 1/2 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2

MPT 1/8 1/4 1/8 1/4 3/8 3/8 1/2 1/2 3/4 3/4 1 1-1/4 1-1/2 2

Utility

Vendor No. TF5605X4 TF5605X4X4X4 TF5605X5 TF5605X6 TF5605X6X6X6 TF5605X8 TF5605X8X8X8 TF5605X10 TF5605X12

Part No. 423496-131280 423497-131280 423498-131280 423499-131280 423500-131280 423501-131280 423502-131280 423503-131280 423504-131280

Price /Each $5.59 6.22 6.68 5.53 7.83 7.90 10.19 10.25 14.34

TF5605X16

423506-131280

22.22

Part No. 421140 421141 421142 421143 421144 421145 421146 421147 421148 421149 421150 421793 421794 421795

Price /Each $3.82 4.11 4.81 3.61 5.27 5.12 6.41 6.85 10.30 29.38 14.94 40.71 69.85 214.83

Tube O.D. 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4

Part No. 423523-131280 423524-131280 423525-131280 423526-131280 423527-131280 423528-131280 423530-131280 423531-131280

Utility Price /Each $6.44 8.05 7.05 10.19 12.81 18.31 27.06 70.19

Part No. 421164

Price /Each $4.44

421166 421167

4.54 6.55

421171 421172

18.85 53.10

Swivel Nut Branch Tee Forged

Weatherhead Tube O.D. 3/8 3/4 1

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Vendor No. TF5707X4 TF5707X5 TF5707X6 TF5707X8 TF5707X10 TF5707X12 TF5707X16 TF5707X20

Vendor No. C5707X6 C5707X12 C5707X16

Part No. 424636-131280 424637-131280 424638-131280

Utility Price /Each $10.09 25.98 37.31

Part No. 421806 421807 421808

Price /Each $4.64 12.26 19.19

10-79 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

37° JIC Fittings

Forged

10_pHyd_43-96.qxd

3/11/07

2:22 PM

Page 80

STEEL SAE 37° (JIC) FLARE-TWIN Steel SAE 37° (JIC) Flare-Twin Cont.

Stainless Steel 37° JIC Tube Fittings Cap Nut

37° JIC Fittings

Bulkhead Union Tee Brazed

Vendor No. TF5725X6 TF5725X8 TF5725X12

Tube O.D. 3/8 1/2 3/4

Price /Each $12.30 15.73 35.11

Part No. 423535-131280 423536-131280 423538-131280

Straight Thread O-Ring Branch Tee

Utility Part No. 425322 425323 425324 425325 425326 425327 425328 425329 425330

Price /Each $12.70 6.16 12.39 7.03 8.10 22.77 27.32 41.78 84.98

Tube O.D. 1/4 3/8

Utility Part No. 425334 425336

Price /Each $3.65 4.08

1/2 3/4 1

425337 425339 425340

5.90 15.26 18.29

Utility Part No. 425344 425345 425346 425347 425348 425349 425350 425351 425353

Price /Each $3.12 2.80 2.21 3.84 3.50 4.40 10.03 15.48 24.21

Utility Part No. 425358 425359 425360 425361 425362 425363 425364 425366

Price /Each $2.04 1.16 1.78 1.87 3.12 4.40 5.90 11.25

Tube O.D. 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4

Bulkhead Nut

Weatherhead Tube O.D. 1/4

Port 1/4

Vendor No. TF5715X4

5/16 3/8 1/2 5/8 3/4 7/8 1

5/16 3/8 1/2 5/8 3/4 7/8 1

TF5715X5 TF5715X6 TF5715X8 TF5715X10 TF5715X12 TF5715X14 TF5715X16

Utility

Part No. 423539-131280

Price /Each $6.62

423540-131280 423541-131280 423542-131280 423543-131280 423544-131280

7.72 7.82 10.63 14.05 19.02

423546-131280

30.69

Part No. 421180

Price /Each $4.75

421182

5.49

421184 421185 421186

9.54 14.36 27.72

Tube Nut

Cross Brazed

Weatherhead Tube O.D. 1/4 3/8 1/2 5/8 3/4 1

Vendor No. TF5955X4 TF5955X6 TF5955X8 TF5955X10

Part No. 423549-131280 423551-131280 423552-131280 423553-131280

Utility Price /Each $10.91 11.79 13.89 20.22

Part No. 421190 421192 421193

Price /Each $7.46 7.08 7.63

421195 421197

18.03 29.94

Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1

Tube Sleeve O-Ring •90 Durometer •Nitrile

Tube O.D. 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2

Vendor No. 7629X1 7629X2 7629X3 7629X4 7629X5 7629X6 7629X7 7629X8 7629X10 7629X12 7629X14 7629X16 7629X20 7629X24 7629X32

Part No. 420415-131280 420416-131280 420417-131280 420418-131280 420419-131280 420420-131280 420421-131280 420422-131280 420423-131280 420424-131280 420425-131280 420426-131280 420427-131280 420428-131280 420429-131280

10-80 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Each $0.08 0.30 0.32 0.25 0.46 0.49 0.48 0.49 0.54 0.57 1.27 1.34 1.39 1.58 1.90

Tube O.D. 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1

10_pHyd_43-96.qxd

3/11/07

2:22 PM

Page 81

STAINLESS STEEL 37° JIC TUBE FITTINGS, FOR-SEAL Straight Tube Union

Straight Tube Union

Tube O.D. 1/8 1/4 5/16 3/8 x1/4 3/8 1/2 x3/8 1/2 x1/2 5/8 3/4 x1/2 3/4 1

Part No. 425370 425373 425375 425376 425377 425379 425380 425383 425385 425387 425392

Price /Each $36.35 8.50 11.52 26.47 10.13 72.03 14.85 27.30 65.28 41.09 48.97

Male Straight Adapter

Swivel Outlet Tee

Large Hex

Tube O.D. 1/4 3/8 x1/4 3/8 x5/16 3/8 1/2 5/8 x1/2 5/8 3/4

Part No. 425403 425405 425406 425407 425410 425411 425412 425415

Price /Each $11.54 17.95 53.03 15.54 22.23 91.52 48.21 43.34

Tube O.D. 1/4 1/4 3/8 3/8 1/2

NPTF 1/8 1/4 1/4 3/8 3/8

Part No. 425803 425804 425805 425806 425807

Price /Each $88.35 75.42 68.54 99.55 89.81

1/2 3/4

425808 425810

106.09 253.26

90° Swivel Elbow Tube O.D. 1/8 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 3/4 3/4 3/4 3/4 7/8 1 1 1 1 1-1/4

NPTF 1/8 1/8 1/4 3/8 1/2 1/4 3/8 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4 1 3/8 1/2 3/4 1 3/8 1/2 3/4 1 3/4 1/2 3/4 1 1-1/4 1-1/4

Part No. 425421 425423 425424 425425 425426 425428 425429 425430 425431 425432 425433 425435 425436 425437 425438 425439 425440 425441 425442 425443 425444 425445 425446 425447 425448 425449 425450 425451 425452 425455

Part No. 425871 425873 425874 425876 425877 425878

Price /Each $25.71 33.77 56.55 126.09 203.80 422.10

Swivel Run Tee

Male NPT Bulkhead

1/2 3/4

Price /Each $10.98 9.48 6.70 32.41 28.39 8.84 142.98 11.25 11.24 9.54 14.47 12.06 11.79 13.83 26.78 85.55 20.63 18.09 87.79 77.39 89.49 28.66 27.00 71.50 95.76 85.29 44.46 41.25 129.78 76.59

Tube O.D. 1/4 3/8 1/2 3/4 1 1-1/4

Tube O.D. 1/4 5/16 3/8 1/2 3/4 1

Part No. 425814 425815 425816 425817 425819 425820

NPTF 1/8 1/4 1/4 3/8 3/8 1/2 3/4 1

Part No. 425881 425883 425884

Price /Each $25.71 32.14 50.62

For-Seal

Bulkhead Nut

Price /Each $16.07 118.19 26.25 39.64 72.84 122.74

Male Straight Swivel Adapter

Tube O.D. 1/4 1/4 3/8 3/8 1/2 1/2 3/4 1

Tube O.D. 1/4 3/8 1/2

Part No. 425840 425841 425843 425844 425845 425846 425850 425851

Price /Each $64.15 65.56 92.65 70.96 98.90 86.76 112.48 179.02

•Typical Application: High pressure hydraulic, pneumatic and chemical processing. •Pressure: Operating pressure to 6000 psi •Sealing Method: Face O-Ring •Vibration: Excellent resistance. •Material: 12L14 Steel •Plating: All fittings are zinc plated, except brazed parts which are oil dipped. •Used with: Steel and stainless steel tubing (tubing for brazing must be non-coated) •Advantages: Tubing is brazed for permanent leakproof connection. •Conformance: Meets SAE J1453. •How to Order: Individually by catalog number O-Ring supplied with fittings. Tube O.D. 3/8 1/2 3/4 1 1-1/4 1-1/2

Vendor No. 4924X6 4924X8 4924X12 4924X16 4924X20 4924X24

Part No. 442032-131280 442033-131280 442034-131280 442035-131280 442036-131280 442037-131280

Price /Each $3.92 6.25 7.20 8.50 15.61 23.09

Vendor No. 4129X4 4129X6 4129X8 4129X10 4129X12 4129X16 4129X20 4129X24

Part No. 442038-131280 442039-131280 442040-131280 442041-131280 442042-131280 442043-131280 442044-131280 442045-131280

Price /Each $2.73 3.77 5.14 9.83 9.93 13.42 19.48 43.80

Cap

Female Straight Swivel Adapter

Tube O.D. 1/4 3/8 1/2 3/4 1 1-1/2

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

NPTF 1/4 3/8 1/2 3/4 1 1-1/2

Part No. 425856 425860 425862 425865 425867 425869

Price /Each $86.67 71.23 100.96 143.07 140.91 236.39

Tube O.D. 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2

10-81 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

37° JIC Fittings & Steel Fittings

Stainless Steel 37° JIC Tube Fittings Cont.

10_pHyd_43-96.qxd

3/11/07

2:22 PM

Page 82

FOR-SEAL, FLARELESS ERMETO® FITTINGS For-Seal Cont.

Male For-Seal to Male Pipe Adapter

Nut

Steel Fittings

Plug

Tube O.D. 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2

Vendor No. 4229X4 4229X6 4229X8 4229X10 4229X12 4229X16 4229X20 4229X24

Part No. 442046-131280 442047-131280 442048-131280 442049-131280 442050-131280 442051-131280 442052-131280 442053-131280

Price /Each $2.44 3.38 4.76 6.03 7.72 13.15 21.04 36.09

Vendor No.

Part No.

Price /Each

4305X4 4305X6X4 4305X6 4305X8X6 4305X8 4305X10X8 4305X10 4305X12X8 4305X12X10 4305X12 4305X16X12 4305X16 4305X20

442054-131280 442055-131280 442056-131280 442057-131280 442058-131280 442059-131280 442060-131280 442061-131280 442062-131280 442063-131280 442064-131280 442065-131280 442066-131280

$2.70 14.82 2.79 8.62 4.75 18.29 5.92 13.90 16.25 8.19 34.34 10.34 35.20

Bulkhead Union

Vendor No. 4325X6 4325X8 4325X12 4325X16

Part No. 442093-131280 442094-131280 442095-131280 442096-131280

Price /Each $9.53 11.00 26.66 40.51

Male 37 JIC to Female FOR-SEAL

Tube O.D. 1/4 3/8 1/2 5/8 3/4 1

Vendor No. 4205X6X6 4205X8 4205X8X8 4205X10 4205X12X8 4205X12 4205X12X16 4205X16 4205X20

Part No. 442105-131280 442106-131280 442107-131280 442108-131280 442109-131280 442110-131280 442111-131280 442112-131280 442113-131280

Price /Each $3.76 5.79 6.43 13.64 13.34 7.32 21.25 11.19 35.57

Vendor No. 7105X2 7105X3 7105X4 7105X5 7105X6 7105X8 7105X10 7105X12 7105X14 7105X16 7105X20 7105X24

Part No. 420129-131280 420130-131280 420131-131280 420132-131280 420133-131280 420134-131280 420135-131280 420136-131280 420137-131280 420138-131280 420139-131280 420140-131280

Price /Each $0.95 1.04 1.02 0.97 1.08 1.71 2.18 2.64 4.32 4.35 10.34 14.22

Bulkhead Nut

• 90 Durometer • Nitrile

Tube O.D.

Tube O.D. 3/8 1/2 3/4 1

MPT 3/8 3/8 1/2 1/2 1/2 3/4 1 1 1-1/4

O-Ring

Union

1/4 x1/4 3/8 x1/4 3/8 x3/8 1/2 x3/8 1/2 x1/2 5/8 x1/2 5/8 x5/8 3/4 x1/2 3/4 x5/8 3/4 x3/4 1 x3/4 1x1 1-1/4 x 1-1/4

Tube O.D. 3/8 1/2 1/2 5/8 3/4 3/4 3/4 1 1-1/4

Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2

Flare 1/4 3/8 1/2 5/8 3/4 1

Vendor No. 4213X4 4213X6 4213X8 4213X10 4213X12 4213X16

Part No. 442099-131280 442100-131280 442101-131280 442102-131280 442103-131280 442104-131280

Price /Each $16.54 21.58 22.66 29.74 47.16 56.48

10-82 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Tube O.D. 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2

Vendor No. 4629X4 4629X6 4629X8 4629X10 4629X12 4629X16 4629X20 4629X24

Part No. 442135-131280 442136-131280 442137-131280 442138-131280 442139-131280 442140-131280 442141-131280 442142-131280

Price /Each $0.08 0.08 0.13 0.13 0.20 0.20 0.34 0.39

Tube O.D. 1/4

Vendor No. 7924X4

Part No. 420147-131280

Price /Each $0.91

3/8 1/2 5/8 3/4 1

7924X6 7924X8 7924X10 7924X12 7924X16

420148-131280 420149-131280 420150-131280 420151-131280 420153-131280

0.87 1.00 1.64 3.09 4.52

Vendor No. 7129X4 7129X6 7129X8 7129X10 7129X12 7129X16 7129X20

Part No. 420161-131280 420162-131280 420163-131280 420164-131280 420165-131280 420166-131280 420167-131280

Price /Each $4.09 5.01 5.86 8.90 8.36 12.40 28.20

Vendor No. 7229X2 7229X4 7229X5 7229X6 7229X8 7229X10 7229X12 7229X16

Part No. 420168-131280 420169-131280 420170-131280 420171-131280 420172-131280 420173-131280 420174-131280 420175-131280

Price /Each $7.33 3.30 8.86 4.12 5.25 10.59 12.02 14.75

Cap

Flareless Ermeto® Fittings Ermeto® Fittings (7000 Series) are especially designed for making leak-proof tube connections. This fitting will effectively withstand high pressure, severe vibration and extreme temperature. No special tools are needed for assembly. Simply cut tube square, preset sleeve on tubing and assemble.

Plug

Sleeve Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2

Tube O.D. 1/4 3/8 1/2 5/8 3/4 1 1-1/4

Vendor No. 7165X2 7165X3 7165X4 7165X5 7165X6 7165X8 7165X10 7165X12 7165X14 7165X16 7165X20 7165X24

Part No. 420113-131280 420114-131280 420115-131280 420116-131280 420117-131280 420118-131280 420119-131280 420120-131280 420121-131280 420122-131280 420123-131280 420124-131280

Price /Each $0.58 0.64 0.70 1.02 1.01 1.11 1.47 2.20 2.68 3.86 4.95 5.86

Tube O.D. 1/8 1/4 5/16 3/8 1/2 5/8 3/4 1

10_pHyd_43-96.qxd

3/11/07

2:22 PM

Page 83

FLARELESS ERMETO® FITTINGS Male Connector

Reducer

Body 3/8 1/2 1/2 3/4 3/4

Tube O.D. 1/4 1/4 3/8 3/8 1/2

Vendor No. 7015X6X4 7015X8X4 7015X8X6 7015X12X6 7015X12X8

Part No. 420210-131280 420211-131280 420212-131280 420214-131280 420215-131280

Price /Each $4.67 6.84 6.97 11.88 12.07

Small Hex Union

Tube O.D. 1/8 3/16 1/4 5/16 3/8 x1/4 3/8 1/2 x3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2

Vendor No. 7305X2 7305X3 7305X4 7305X5 7305X6X4 7305X6 7305X8X6 7305X8 7305X10 7305X12 7305X14 7305X16 7305X20 7305X24 7305X32

Part No. 420218-131280 420219-131280 420220-131280 420221-131280 420222-131280 420223-131280 420224-131280 420225-131280 420226-131280 420227-131280 420228-131280 420229-131280 420230-131280 420231-131280 420232-131280

Price /Each $7.51 6.67 5.30 6.74 17.04 5.86 9.30 8.41 10.85 14.78 22.16 23.78 54.61 77.68 169.85

Large Hex Union

Tube O.D. 1/4 3/8 1/2 3/4 1

Vendor No. 7306X4 7306X6 7306X8 7306X12 7306X16

Part No. 420233-131280 420234-131280 420236-131280 420237-131280 420238-131280

Price /Each $10.34 13.49 19.61 27.60 40.08

Part No. 420239-131280 420240-131280 420241-131280 420242-131280 420243-131280

Price /Each $8.62 10.16 15.39 28.46 60.74

Bulkhead Union

Tube O.D. 1/4 3/8 1/2 3/4 1

Vendor No. 7325X4 7325X6 7325X8 7325X12 7325X16

Straight Thread O-Ring Connector

Tube O.D. 1/8 1/8 3/16 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 3/4

MPT 1/8 1/4 1/8 1/8 1/4 3/8 1/2 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4 3/8 1/2 1/2

Vendor No. 7205X2 7205X2X4 7205X3 7205X4 7205X4X4 7205X4X6 7205X4X8 7205X5 7205X5X4 7205X6X2 7205X6 7205X6X6 7205X6X8 7205X8X4 7205X8 7205X8X8 7205X8X12 7205X10X6 7205X10 7205X12X8

Part No. 420244-131280 420245-131280 420246-131280 420247-131280 420248-131280 420249-131280 420250-131280 420251-131280 420252-131280 420253-131280 420254-131280 420255-131280 420256-131280 420257-131280 420258-131280 420259-131280 420260-131280 420261-131280 420262-131280 420263-131280

Price /Each $4.08 5.08 3.64 3.19 4.15 4.50 6.84 4.88 5.35 4.38 3.90 4.69 7.07 6.24 5.50 6.80 11.10 7.91 6.84 10.40

3/4 1 1 1-1/4 1-1/2 2

3/4 3/4 1 1-1/4 1-1/2 2

7205X12 7205X16X12 7205X16 7205X20 7205X24 7205X32

420264-131280 420266-131280 420267-131280 420268-131280 420269-131280 420270-131280

10.18 16.80 16.10 33.29 43.09 95.45

Part No. 420271-131280 420273-131280 420274-131280 420275-131280 420276-131280 420277-131280 420278-131280 420279-131280 420280-131280 420281-131280 420282-131280 420283-131280 420284-131280 420285-131280

Price /Each $7.36 3.53 4.64 4.99 5.13 6.43 6.89 6.42 9.24 9.57 13.98 20.30 23.87 56.73

Female Connector

Tube O.D. 1/8 1/4 1/4 5/16 3/8 3/8 1/2 1/2 1/2 5/8 3/4 7/8 1 1-1/4

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

FPT 1/8 1/8 1/4 1/8 1/4 3/8 1/4 3/8 1/2 1/2 3/4 3/4 1 1-1/4

Vendor No. 7255X2 7255X4 7255X4X4 7255X5 7255X6 7255X6X6 7255X8X4 7255X8 7255X8X8 7255X10 7255X12 7255X14 7255X16 7255X20

Tube O.D. 3/16 1/4 1/4 1/4 5/16 3/8 1/2 1/2 1/2 3/4 1 1 1-1/4 1-1/2

Port 3/16 1/4 5/16 3/8 5/16 3/8 1/2 5/8 3/4 3/4 3/4 1 1-1/4 1-1/2

Vendor No. 7315X3 7315X4 7315X4X5 7315X4X6 7315X5 7315X6 7315X8 7315X8X10 7315X8X12 7315X12 7315X16X12 7315X16 7315X20 7315X24

Part No. 420287-131280 0420288 420289-131280 420290-131280 420291-131280 420292-131280 420294-131280 420295-131280 420296-131280 420298-131280 420301-131280 420302-131280 420303-131280 420304-131280

Price /Each $10.64 4.20 11.50 10.85 6.23 4.66 6.73 9.22 14.25 11.20 28.27 17.01 41.48 47.85

Part No. 420306-131280 420307-131280 420309-131280 420310-131280 420311-131280 420312-131280

Price /Each $7.34 11.65 9.16 11.34 15.26 23.94

45° Male Elbow

Tube O.D. 1/4 1/4 3/8 1/2 5/8 3/4

MPT 1/8 1/4 1/4 3/8 1/2 3/4

Vendor No. 7355X4 7355X4X4 7355X6 7355X8 7355X10 7355X12

90° Union Elbow

Tube O.D. 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1

Vendor No. 7505X4 7505X5 7505X6 7505X8 7505X10 7505X12 7505X14 7505X16

Part No. 420314-131280 420315-131280 420316-131280 420317-131280 420318-131280 420319-131280 420320-131280 420321-131280

Price /Each $9.16 10.28 10.57 14.50 17.86 25.13 36.40 43.81

10-83 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Steel Fittings

Flareless Ermeto® Fittings Cont.

10_pHyd_43-96.qxd

3/11/07

2:22 PM

Page 84

FLARELESS ERMETO® FITTINGS Flareless Ermeto® Fittings Cont.

Straight Thread O-Ring 90° Elbow

Straight Thread O-Ring Run Tee

Steel Fittings

90° Male Elbow

Tube O.D. 1/8 3/16 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 7/8 1 1 1-1/4 1-1/2 2

MPT 1/8 1/8 1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 1/2 3/4 3/4 3/4 1 1-1/4 1-1/2 2

Vendor No. 7405X2 7405X3 7405X4 7405X4X4 7405X5 7405X5X4 7405X6X2 7405X6 7405X6X6 7405X6X8 7405X8X4 7405X8 7405X8X8 7405X10X6 7405X10 7405X12X8 7405X12 7405X14 7405X16X12 7405X16 7405X20 7405X24 7405X32

Part No. 420323-131280 420324-131280 420325-131280 420326-131280 420327-131280 420328-131280 420329-131280 420330-131280 420331-131280 420332-131280 420333-131280 420334-131280 420335-131280 420336-131280 420337-131280 420338-131280 420339-131280 420340-131280 420341-131280 420342-131280 420343-131280 420344-131280 420345-131280

Price /Each $7.52 7.68 7.34 8.31 8.08 9.16 9.23 8.88 11.31 13.05 12.30 11.62 15.32 15.39 14.49 20.25 20.69 29.69 34.68 33.58 64.73 91.20 189.87

Tube O.D. 1/4 5/16 3/8 1/2 5/8 3/4

Port 1/4 5/16 3/8 1/2 5/8 3/4

Vendor No. 7515X4 7515X5 7515X6 7515X8 7515X10 7515X12

Part No. 420357-131280 420358-131280 420359-131280 420360-131280 420361-131280 420362-131280

Price /Each $9.73 13.28 12.68 15.35 19.15 25.89

FPT 1/8 1/4 1/4 3/8 3/8 1/2 1/2 3/4 1

Vendor No. 7455X4 7455X4X4 7455X6 7455X6X6 7455X8 7455X8X8 7455X10 7455X12 7455X16

Part No. 420346-131280 420347-131280 420349-131280 420350-131280 420351-131280 420352-131280 420353-131280 420354-131280 420356-131280

Price /Each $7.81 9.77 9.98 15.00 15.71 17.56 18.28 27.62 49.31

Port 1/4 3/8 1/2

Vendor No. 7716X4 7716X6 7716X8

Part No. 420388-131280 420389-131280 420390-131280

Price /Each $23.48 23.65 23.80

Male Branch Tee

Union Tee

Tube O.D. 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8

Vendor No. 7705X3 7705X4 7705X5 7705X6 7705X8 7705X10 7705X12 7705X14

Part No. 420365-131280 420366-131280 420367-131280 420368-131280 420369-131280 420370-131280 420371-131280 420372-131280

Price /Each $35.95 14.35 15.16 15.76 20.44 27.27 37.65 66.71

Male Run Tee

Tube O.D. 1/4 1/4 3/8 1/2 1/2 5/8 3/4

MPT 1/8 1/4 1/4 3/8 1/2 1/2 3/4

Vendor No. 7755X4 7755X4X4X4 7755X6 7755X8 7755X8X8X8 7755X10 7755X12

Tube O.D. 1/4 1/4 5/16 3/8 1/2 1/2

Part No. 420374-131280 420375-131280 420376-131280 420377-131280 420378-131280 420379-131280 420380-131280

Price /Each $10.19 12.99 13.12 18.13 23.89 24.89 34.92

Female Run Tee

MPT 1/8 1/4 1/8 1/4

Vendor No. 7605X4 7605X4X4X4 7605X5 7605X6

Part No. 420391-131280 420392-131280 420393-131280 420394-131280

Price /Each $10.73 16.60 21.08 12.79

3/8 1/2

7605X8 7605X8X8X8

420395-131280 420396-131280

19.76 21.24

Female Branch Tee

Tube O.D. 1/4 1/4 3/8 1/2 5/8 3/4 7/8

90° Female Elbow

Tube O.D. 1/4 1/4 3/8 3/8 1/2 1/2 5/8 3/4 1

Tube O.D. 1/4 3/8 1/2

FPT 1/8 1/4 1/4 3/8 1/2 3/4 3/4

Vendor No. 7655X4 7655X4X4X4 7655X6 7655X8 7655X10 7655X12 7655X14

Part No. 420400-131280 420401-131280 420402-131280 420403-131280 420404-131280 420405-131280 420406-131280

Price /Each $12.87 16.49 15.56 21.00 31.13 40.59 61.76

Straight Thread O-Ring Branch Tee

Tube O.D. 1/4 x1/4 3/8 x3/8

Vendor No. 7715X4 7715X6

Part No. 420409-131280 420410-131280

Price /Each $17.66 17.86

Vendor No. 7955X4 7955X6

Part No. 420412-131280 420413-131280

Price /Each $27.46 35.46

Cross

Tube O.D. 1/4 1/4 1/2 5/8

10-84 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

FPT 1/8 1/4 3/8 1/2

Vendor No. 7805X4 7805X4X4X4 7805X8 7805X10

Part No. 420382-131280 420383-131280 420385-131280 420386-131280

Price /Each $13.69 17.07 22.88 34.39

Tube O.D. 1/4 3/8

10_pHyd_43-96.qxd

3/11/07

2:23 PM

Page 85

SWIVEL ADAPTERS Female Pipe Swivel to Female Pipe

Typical Application: Pressure hydraulic systems. Pressure: Up to 5,000 psi depending on size. Sealing Method: Metal to metal, 30° cone-NPSM thread on swivel end. Material: Carbon steel, AISI/SAE 12L14. Plating: Zinc, yellow dichromate finish.

Weatherhead

Female Pipe Swivel to Male Pipe Weatherhead NPSM 1/8 1/8 1/4 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 1 1 1 1-1/4 1-1/4 1-1/2 2

MPT 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 3/4 1/2 3/4 1 3/4 1 1-1/4 1 1-1/4 1-1/2 2

Vendor No. 9205X2X2 9205X2X4 9205X4X2 9205X4X4 9205X4X6 9205X4X8 9205X6X4 9205X6X6 9205X6X8 9205X8X6 9205X8X8 9205X8X12 9205X12X8 9205X12X12 9205X12X16 9205X16X12 9205X16X16 9205X16X20 9205X20X16 9205X20X20 9205X24X24 9205X32X32

Part No. 420013-131280 420014-131280 420015-131280 420016-131280 420017-131280 420018-131280 420019-131280 420020-131280 420021-131280 420022-131280 420023-131280 420024-131280 420025-131280 420026-131280 420027-131280 420028-131280 420029-131280 420030-131280 420031-131280 420032-131280 420035-131280 420036-131280

Utility Price /Each $2.18 3.50 3.31 2.80 3.60 6.63 2.97 3.90 4.54 5.13 5.08 6.63 8.52 7.42 12.71 12.33 12.41 19.02 21.61 19.41 29.66 57.76

Part No. 421213 421214 421215 421216 421217 421218 421219 421220 421221 421222 421223 421224 421225 421226 421227 421228 421229 421230 421231 421232 421235 421236

Price /Each $1.34 2.25 1.71 1.55 2.25 4.54 2.17 2.06 2.95 2.58 3.00 4.12 4.54 4.23 8.14 8.91 7.11 21.82 17.74 11.08 18.03 37.30

Female 37° Swivel to Male Pipe Adapter

Weatherhead Tube O.D. 1/4 5/16 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4 1 1 1-1/4

MPT 1/4 1/4 1/4 3/8 3/8 1/2 3/8 1/2 1/2 3/4 3/4 1 1-1/4

Vendor No. 9100x4x4 9100x5x4 9100x6x4 9100x6x6 9100x8x6 9100x8x8 9100x10x6 9100x10x8 9100x12x8 9100x12x12 9100x16x12 9100x16x16 9100x20x20

Part No. 420000-131280 420001-131280 420002-131280 420003-131280 420004-131280 420005-131280 420006-131280 420007-131280 420008-131280 420009-131280 420010-131280 420011-131280 420012-131280

Utility Price /Each $6.39 6.88 6.14 7.43 8.76 8.65 9.75 9.91 12.80 13.64 17.36 15.67 28.87

Part No. 421200 421201 421202 421203 421204 421205 421206 421207 421208 421209 421210 421211 421212

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price /Each $3.46 6.77 3.64 4.16 4.58 5.22 10.37 5.53 12.55 11.59 19.92 14.42 27.19

NPSM 1/8 1/4 1/4 3/8 3/8 3/8 1/2 1/2 3/4 3/4 1 1 1-1/2 2

FPT 1/8 1/4 3/8 1/4 3/8 1/2 3/8 1/2 3/4 1 1 1-1/4 1-1/2 2

Vendor No. 9255X2X2 9255X4X4 9255X4X6 9255X6X4 9255X6X6 9255X6X8 9255X8X6 9255X8X8 9255X12X12 9255X12X16 9255X16X16 9255X20X20 9255X24X24 9255X32X32

Part No. 420037-131280 420038-131280 420039-131280 420040-131280 420041-131280 420042-131280 420043-131280 420044-131280 420045-131280 420046-131280 420047-131280 420048-131280 420049-131280 420050-131280

Utility Price /Each $1.99 2.91 4.92 4.40 3.91 6.59 5.62 4.76 6.96 19.97 10.77 18.92 29.98 63.16

Price /Each $1.40 1.70 3.53 2.56 2.22 3.41 3.78 2.89 4.33 13.32 6.91 11.46 20.55 35.19

Part No. 421237 421238 421239 421240 421241 421242 421243 421244 421245 421246 421247 421248 421249 421250

Female Pipe Swivel to Male Pipe 45° Elbow

Weatherhead NPSM 1/8 1/4 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 1 1 1 1-1/4

MPT 1/8 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 3/4 1/2 3/4 1 3/4 1 1-1/4 1-1/4

Vendor No. 9355X2X2 9355X4X2 9355X4X4 9355X4X6 9355X4X8 9355X6X4 9355X6X6 9355X6X8 9355X8X6 9355X8X8 9355X8X12 9355X12X8 9355X12X12 9355X12X16 9355X16X12 9355X16X16 9355X16X20 9355X20X20

Part No. 420051-131280 420052-131280 420053-131280 420054-131280 420055-131280 420056-131280 420057-131280 420058-131280 420059-131280 420060-131280 420061-131280 420062-131280 420063-131280 420064-131280 420065-131280 420066-131280 420067-131280 420068-131280

Utility Price /Each $4.45 8.06 5.51 7.79 15.53 9.55 6.74 9.77 11.12 8.13 14.63 24.13 12.42 26.67 29.24 19.46 35.84 37.65

Part No. 421251 421252 421253 421254 421255 421256 421257 421258 421259 421260 421261 421262 421263 421264 421265 421266 421267 421268

Price /Each $2.58 6.56 3.04 5.36 10.54 10.14 3.82 5.45 10.14 5.05 10.77 15.46 7.21 18.87 21.81 12.36 26.62 26.61

10-85 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Swivel Adapters

Swivel Adapters

10_pHyd_43-96.qxd

3/11/07

2:23 PM

Page 86

SWIVEL ADAPTERS Swivel Adapters

Male Straight Thread to Female Pipe Swivel Straight

Swivel Adapters

Female Pipe Swivel to Male Pipe 90° Elbow Weatherhead

Weatherhead NPSM 1/8 1/8 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 3/4 3/4 1 1 1-1/4 1-1/2 2

MPT 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4 3/8 1/2 3/4 1 3/4 1 3/4 1 1-1/4 1-1/2 2

Vendor No. 9405X2X2 9405X2X4 9405X4X2 9405X4X4 9405X4X6 9405X4X8 9405X6X4 9405X6X6 9405X6X8 9405X6X12 9405X8X6 9405X8X8 9405X8X12 9405X8X16 9405X12X12 9405X12X16 9405X16X12 9405X16X16 9405X20X20 9405X24X24 9405X32X32

Part No. 420071-131280 420072-131280 420073-131280 420074-131280 420075-131280 420076-131280 420077-131280 420078-131280 420079-131280 420080-131280 420081-131280 420082-131280 420083-131280 420084-131280 420085-131280 420086-131280 420087-131280 420088-131280 420091-131280 420093-131280 420094-131280

Utility Price /Each $4.29 5.52 5.59 4.80 5.80 9.23 6.88 6.41 7.79 13.62 8.33 8.53 12.83 26.04 14.20 21.57 23.04 22.82 39.85 56.30 163.82

Part No. 421271 421272 421273 421274 421275 421276 421277 421278 421279 421280 421281 421282 421283 421284 421285 421286 421287 421288

Price /Each $2.56 3.95 4.01 2.85 3.61 5.16 4.18 3.61 4.23 9.15 4.74 4.38 7.56 23.44 7.37 16.09 17.60 15.27

Female Pipe Swivel to Female Pipe 90° Elbow

Weatherhead NPSM 1/8 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 1 1 1-1/4 1-1/2 2

FPT 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 3/4 1/2 3/4 1 3/4 1 1-1/4 1-1/2 2

Vendor No. 9455X2X2 9455X4X4 9455X4X6 9455X4X8 9455X6X4 9455X6X6 9455X6X8 9455X8X6 9455X8X8 9455X8X12 9455X12X8 9455X12X12 9455X12X16 9455X16X12 9455X16X16 9455X20X20 9455X24X24 9455X32X32

Part No. 420095-131280 420096-131280 420097-131280 420098-131280 420099-131280 420100-131280 420101-131280 420102-131280 420103-131280 420104-131280 420105-131280 420106-131280 420107-131280 420108-131280 420109-131280 420110-131280 420111-131280 420112-131280

Thread 7/16 Straight 7/16 Straight 1/2 Straight 9/16 Straight 9/16 Straight 9/16 Straight 3/4 Straight 3/4 Straight 3/4 Straight 3/4 Straight 7/8 Straight 7/8 Straight 7/8 Straight 1-1/16 Straight 1-1/16 Straight 1-3/16 Straight 1-5/16 Straight 1-5/16 Straight 1-5/8 Straight

NPSM 1/4 3/8 1/4 1/4 3/8 1/2 1/4 3/8 1/2 3/4 3/8 1/2 3/4 1/2 3/4 3/4 3/4 1 1-1/4

Vendor No. 9315X4X4 9315X4X6 9315X5X4 315X6X4 9315X6X6 9315X6X8 9315X8X4 9315X8X6 9315X8X8 9315X8X12 9315X10X6 9315X10X8 9315X10X12 9315X12X8 9315X12X12 9315X14X12 9315X16X12 9315X16X16 9315X20X20

Part No. 420524-131280 420525-131280 420526-131280 420527-131280 420528-131280 420529-131280 420530-131280 420531-131280 420532-131280 420533-131280 420534-131280 420535-131280 420536-131280 420537-131280 420538-131280 420539-131280 420540-131280 420541-131280 420543-131280

Price /Each $2.97 5.12 5.79 4.00 4.12 6.59 4.87 4.01 4.43 9.14 5.88 5.12 7.33 7.81 8.42 18.96 15.30 14.27 33.63

Utility Part No. 421809 421810 421811 421812 421813 421814 421815 421816 421817 421818 421819 421820 421821 421822 421823 421824 421825 421826

Price /Each $1.81 7.61 4.01 1.97 2.09 4.76 3.22 2.67 2.71 6.20 3.71 3.48 4.91 5.73 4.64 13.04 9.49 8.55

Female Pipe Swivel to Female Pipe 45° Elbow

NPSM 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2

FPT 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2

Vendor No. 9385X4X4 9385X6X6 9385X8X8 9385X12X12 9385X16X16 9385X20X20 9385X24X24

Part No. 420556-131280 420558-131280 420560-131280 420561-131280 420563-131280 420564-131280 420565-131280

Price /Each $7.68 9.88 10.05 15.00 25.61 52.65 76.04

Utility Price /Each $4.39 5.48 7.67 13.55 13.40 6.63 8.73 10.26 8.12 14.01 31.80 12.78 25.95 58.48 21.95 42.43 93.58 233.92

10-86 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 421295 421296 421297 421298 421299 421300 421301 421302 421303 421304 421305 421306 421307 421308 421309

Price /Each $2.58 2.84 5.11 13.03 9.70 3.71 6.30 7.66 5.15 9.06 29.50 7.47 18.73 54.87 15.20

Female 45° Flare Swivel to Male SAE 45° Elbow

Tube O.D. 3/8 1/2 5/8

Vendor No. 9154X6X6 9154X8X8 9154X10X10

Part No. 420567-131280 420568-131280 420569-131280

Price /Each $7.89 9.94 11.71

10_pHyd_43-96.qxd

3/11/07

2:23 PM

Page 87

SWIVEL ADAPTERS Swivel Adapters Cont. Male Straight Thread to Female Pipe Swivel 45° Elbow Weatherhead

Thread 7/16 Straight 7/16 Straight 9/16 Straight 9/16 Straight 3/4 Straight 3/4 Straight 7/8 Straight 1-1/16 Straight 1-5/16 Straight

Vendor No. 9365X4X4 9365X4X6 9365X6X6 9365X6X8 9365X8X6 9365X8X8 9365X10X8 9365X12X12 9365X16X16

NPSM 1/4 3/8 3/8 1/2 3/8 1/2 1/2 3/4 1

Part No. 420570-131280 420571-131280 420572-131280 420573-131280 420574-131280 420575-131280 420576-131280 420577-131280 420578-131280

Price /Each $10.63 11.42 10.98 16.84 13.76 12.46 13.42 20.11 38.00

90° Elbow 45° Female Swivel to SAE 45°

Thread 7/16 Straight 7/16 Straight 9/16 Straight 9/16 Straight 9/16 Straight 3/4 Straight 3/4 Straight 3/4 Straight 7/8 Straight 7/8 Straight 7/8 Straight 1-1/16 Straight 1-1/16 Straight 1-5/16 Straight 1-5/16 Straight 1-5/8 Straight

NPSM 1/4 3/8 1/4 3/8 1/2 3/8 1/2 3/4 3/8 1/2 3/4 1/2 3/4 3/4 1 1-1/4

Vendor No. 9515X4X4 9515X4X6 9515X6X4 9515X6X6 9515X6X8 9515X8X6 9515X8X8 9515X8X12 9515X10X6 9515X10X8 9515X10X12 9515X12X8 9515X12X12 9515X16X12 9515X16X16 9515X20X20

Part No. 420584-131280 420585-131280 420586-131280 420587-131280 420588-131280 420589-131280 420590-131280 420591-131280 420592-131280 420593-131280 420594-131280 420595-131280 420596-131280 420598-131280 420599-131280 420601-131280

Utility

Price /Each $7.30 7.68 8.13 8.04 12.80 11.61 11.35 17.56 11.34 11.63 19.77 17.43 17.29 30.72 27.05 62.91

Part No. 421860 421861 421862 421863 421864 421865 421866 421867 421868 421869 421870 421871 421872

Price /Each $5.15 11.95 4.76 5.61 8.97 7.49 7.73 11.85 8.33 7.76 16.24 12.21 12.75

Female Pipe Swivel to Male Pipe 90° Elbow - Long

Vendor No. 9151X6X6 9151X8X8 9151X10X10

Tube O.D. 3/8 1/2 5/8

Part No. 420581-131280 420582-131280 420583-131280

Price /Each $6.86 7.25 11.70

Male Pipe Swivel to Male Pipe Rigid 90° Elbow

NPSM 1/8 1/4 3/8 1/2 3/4

Vendor No. 9405X2X2LL 9405X4X4LL 9405X6X6LL 9405X8X8LL 9405X12X12LL

MPT 1/8 1/4 3/8 1/2 3/4

Part No. 0445649 0445650 0445651 0445652 0445647

Price /Each $6.14 8.07 9.14 13.02 18.64

Female Pipe Swivel Tee

Swivel End 1/4 3/8 1/2

MPT 1/4 3/8 1/2

Vendor No. 9435X4X4 9435X6X6 9435X8X8

Part No. 420604-131280 420605-131280 420606-131280

Price /Each $12.85 13.64 18.45

NPSM 1/4 3/8 1/2

Vendor No.

Part No.

Price /Each

9705X4X4X4 9705X6X6X6 9705X8X8X8

420608-131280 420609-131280 420610-131280

$11.00 12.00 16.80

Female Pipe Swivel to Female Pipe Branch Tee

NPSM 1/4 3/8 1/2

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

FPT

Vendor No. 9456X4X4X4 9456X6X6X6 9456X8X8X8

Part No. 420629-131280 420631-131280 420633-131280

Price /Each $11.70 10.11 13.75

10-87 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Swivel Adapters

Male Straight Thread to Female Pipe Swivel 90° Elbow

10_pHyd_43-96.qxd

3/11/07

2:23 PM

Page 88

SWIVEL& STAINLESS STEEL ADAPTERS & HOSE Swivel Adapters Cont.

O.R.B. Swivel Adapter

Swivel Adapters & Hydraulic Hose

Female Pipe Swivel to Male Pipe Branch Tee Port 3/8 1/2 NPSM 1/8 1/4 1/4 3/8 3/8 1/2

Vendor No. 9406X2X2X2 9406X4X4X4 9406X4X4X6 9406X6X6X6 9406X6X6X8 9406X8X8X8

MPT 1/8 1/4 3/8 3/8 1/2 1/2

Part No. 420614-131280 420615-131280 420616-131280 420618-131280 420619-131280 420620-131280

Price /Each $9.08 8.05 11.35 10.63 13.54 13.88

Stainless Steel Adapter Unions

Tube O.D. 3/8 1/2

Price /Each $136.07 175.66

Part No. 426038 426039

General Purpose Low Pressure Hydraulic Hoses

*ALL STARRED ITEMS ARE BULK QUANTITIES*

Male Adapter Union H009 General Purpose Hose SAE 100R6 NPTF 1/8

NPSM 1/8

Part No. 425891

Price /Each $43.35

1/8 1/4 1/4 3/8 1/2 3/4 1 1-1/2

1/4 1/4 3/8 3/8 1/2 3/4 1 1-1/2

425892 425894 425895 425898 425902 425905 425908 425912

85.55 27.86 91.90 40.60 51.42 63.20 110.94 267.58

• SAE J1942/1. Qualified for marine applications Hyd. service. -05, -06 and -08 with E-Series or 009 B-Series • MSHA Accepted. • Typical Application: General-purpose air, oil and water lines. Low pressure Hydraulic • Inner Tube: Nitrile • Reinforcement: 1 Fiber Braid • Cover: Neoprene • Temperature Range: -40°F to +212°F (-40°C to +100°C) • Color: Black • Hose Ends: Coll-O-Crimp® E-Series for 5-8 Sizes; Field Attachable 009 B-Series

O.R.B. Connector

Specifications Port Size 1/4 3/8 1/2 1

Price /Each $46.15 67.81 85.93 123.83

Part No. 425969 425970 425971 425975

Straight Connector

Tube O.D. 1/4 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 5/8 3/4 3/4 1 1 1 1-1/4 1-1/4 1-1/4

Port 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 5/8 5/8 1/2 3/4 1/2 3/4 1 1 1-1/4 1-1/4

Min. Burst Vendor Work Pressure Pressure Min. Bend Wt./100 No. Hose I.D. Hose O.D. (PSI) (PSI) Radii (ft) H00904 1/4 1/2 400 1600 2- 21/2 10 H00905 5/16 9/16 400 1600 3 12 H00906 3/8 5/8 400 1600 3 14 H00908 1/2 25/32 400 1600 4 20

Length 25’, 50’, 250’ 25’, 50’, 250’ 25’, 50’, 250’ 50’, 250’

Fastenal Branch Personnel: Please Sold Request number of feet when ordering.

Part No. 425981 425982 425984 425985 425987 425989 425990 425993 425994 425995 426000 426002 426004 426006 426008 426009 426012 426013 426015

10-88 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Each $48.90 5.47 8.69 34.55 30.40 7.03 13.74 39.96 9.59 18.60 58.99 83.29 36.02 97.44 87.79 54.05 144.67 91.17 197.53

Part No. 400133-131280 400134-131280 400135-131280 400136-131280 400137-131280 400138-131280 400139-131280 400140-131280 400141-131280 400142-131280 400143-131280

Vendor No. H00904-25 H00904-50 H00904-250 H00905-25 H00905-50 H00905-250 H00906-25 H00906-50 H00906-250 H00908-50 H00908-250

Hose I.D. 1/4 1/4 *1/4 5/16 5/16 *5/16 3/8 3/8 *3/8 1/2 *1/2

Price /Ft $2.60 2.60 2.07 2.95 2.90 2.30 3.40 3.15 2.52 4.33 3.58

10_pHyd_43-96.qxd

3/11/07

2:23 PM

Page 89

GENERAL PURPOSE HYDRAULIC HOSE General Purpose Low Pressure Hydraulic Hose Cont.

H100 General Purpose Hose

H201 General Purpose Hose (Push-On) • MSHA Accepted (Black only) • Typical Application: General-purpose low-pressure air, oil and water lines. • Inner Tube: Nitrile • Reinforcement: 1 Fiber Braid • Cover: Neoprene (Black), Vinyl Nitrile (Colored Hoses) • Temperature Range: -40°F to +212°F (-40°C to +100°C) • Cover Color Available Through Warehouse: Black, Blue, Red. • Cover Color on Special Orders: Gray, Yellow, Green. • Hose Ends: Field Attachable 100 B-Series Barb-Tite

Specifications Min. Burst Vendor Work Pressure Pressure Min. Bend Wt./100 No. Hose I.D. Hose O.D. (PSI) (PSI) Radii (ft) Length H20104 1/4 1/2 250 1000 3 9 50’, 250’, 500’ H20106 3/8 5/8 250 1000 3 13 50’, 250’, 500’ H20108 1/2 3/4 250 1000 5 15 50’, 250’, 500’ H20110 5/8 29/32 250 1000 6 23 250’ H20112 3/4 1-1/32 250 1000 7 26 250’

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400063-131280 400064-131280 400065-131280 400066-131280 400068-131280 400069-131280 400070-131280 400071-131280 400072-131280 400073-131280 0400600 0400601

Vendor No. H20104BK-50 H20104BK-250 H20104BK-500 H20106BK-50 H20106BK-500 H20108BK-50 H20108BK-250 H20108BK-500 H20110BK-250 H20112BK-250 H20104BU-250R H20106BU-250R

Hose I.D. 1/4 1/4 *1/4 3/8 *3/8 1/2 1/2 *1/2 *5/8 *3/4 1/4 3/8

Price /Ft $1.32 1.22 1.18 1.61 1.48 1.81 1.60 1.75 2.67 2.95 1.22 1.55

0400602 0400603 0400604 0400605 0400606 0400607 0400608 0400609

H20108BU-250R H20104RD-250R H20106RD-250R H20108RD-250R H20110BU-250R H20110RD-250R H20112BU-250R H20112RD-250R

1/2 1/4 3/8 1/2 5/8 5/8 3/4 3/4

1.60 1.22 1.55 1.60 2.67 2.67 2.95 2.95

• Typical Application: General-purpose low-pressure air, fuel, diesel fuel, oil and water lines. • Inner Tube: Nitrile • Reinforcement: 1 Fiber Braid • Cover: Fiber Braid • Temperature Range: -40°F to +212°F (-40°C to +100°C) • Hose Ends: Field Attachable 100 B-Series Barb-Tite Specifications Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H10004 1/4 1/2 350 H10005 5/16 9/16 350 H10006 3/8 5/8 350 H10008 1/2 3/4 350 H10010 5/8 29/32 350 H10012 3/4 1-1/32 350

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 1400 3 7 1400 3 9 1400 3 11 1400 5 14 1400 6 16 1400 7 18

Length 50’, 250’ 50’, 250’ 50’, 250’ 50’, 250’ 50’, 250’ 50’, 250’

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400074-131280 400075-131280 400076-131280

Vendor No. H10004-50 H10004-250 H10005-50

Hose I.D. 1/4 *1/4 5/16

Price /Ft $2.85 2.45 4.18

400077-131280 400078-131280 400079-131280 400080-131280 400081-131280 400082-131280 400083-131280 400084-131280 400085-131280

H10005-250 H10006-50 H10006-250 H10008-50 H10008-250 H10010-50 H10010-250 H10012-50 H10012-250

*5/16 3/8 *3/8 1/2 *1/2 5/8 *5/8 3/4 *3/4

3.12 2.73 2.60 3.35 3.25 4.35 4.10 6.43 5.58

H101 General Purpose Hose Rubber Cover • MSHA Accepted (Black only) • Typical Application: General-purpose low-pressure air, oil and water lines. • Inner Tube: Nitrile • Reinforcement: 1 Fiber Braid • Cover: Neoprene • Temperature Range: -40°F to +212°F (-40°C to +100°C) • Hose Ends: Field Attachable 100 B-Series Barb-Tite Specifications Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H10104 1/4 1/2 350 H10105 5/16 9/16 350 H10106 3/8 5/8 350 H10108 1/2 3/4 350 H10110 5/8 29/32 350 H10112 3/4 1-1/32 350

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 1400 3 9 1400 3 11 1400 3 13 1400 5 15 1400 6 23 1400 7 26

Length 50’, 250’ 50’, 250’ 50’, 250’ 50’, 250’ 50’,250’ 50’, 250’

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400086-131280 400087-131280 400088-131280 400089-131280 400090-131280 400091-131280 400092-131280 400093-131280 400094-131280 400095-131280 400096-131280 400097-131280

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Vendor No. H10104-50 H10104-250 H10105-50 H10105-250 H10106-50 H10106-250 H10108-50 H10108-250 H10110-50 H10110-250 H10112-50 H10112-250

Hose I.D. 1/4 *1/4 5/16 *5/16 3/8 *3/8 1/2 *1/2 5/8 *5/8 3/4 *3/4

Price /Ft $2.10 2.03 2.20 2.13 2.27 2.15 2.35 2.23 3.35 3.23 4.45 4.25

10-89 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hydraulic Hose

Fabric Cover

10_pHyd_43-96.qxd

3/11/07

2:24 PM

Page 90

GENERAL PURPOSE HYDRAULIC HOSE General Purpose Low Pressure Hydraulic Hose Cont.

H115 Oil-Resistant General Purpose Hose Air/Water

Hydraulic Hose

• Typical Application: Oily air systems, water. Ideal for pneumatic tool operation. • Inner Tube: Nitrile • Reinforcement: Multi-Fiber Braid • Cover: Nitrile Blend • Cover Color: Red • Temperature Range: -40°F to +160°F (-40°C to +71°C) • Hose Ends: Coll-O-Crimp® U-Series except 5 and 24 Sizes; Field Attachable 057 B-Series; 105 B-Series

H209 General Purpose Hose • Typical Application: General hydraulic and pneumatic service; high-temperature industrial cleaning and car wash applications. • Inner Tube: Nylon 11 • Reinforcement: 1 Fiber Braid • Cover: Polyurethane • Cover Color: Black • Temperature Range: -40°F to +200°F (40°C to +93°C) • Hose Ends: Coll-OCrimp® E-Series

Specifications

Specifications Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H20904 1/4 29/64 2250 H20906 3/8 9/16 1350 H20908 1/2 45/64 1000

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 9000 1-1/2 5 5400 2-1/2 7 4000 3-1/2 9

Length 500' 250' 250'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering.

Length 50’, 550’ 50’, 550’ 50’, 550’ 50’, 550’ 50’, 550’ 50’, 300’ 50’, 300’ 50’, 300’

Price /Ft

Fastenal Branch Personnel: Please Sold Request number of feet when ordering.

Hose I.D.

H20904-500 H20906-250 H20908-250

*1/4 *3/8 *1/2

$1.78 2.26 2.63

Part No. 400108-131280 400109-131280 400110-131280 400111-131280 400112-131280 400113-131280 400114-131280 400115-131280 400118-131280 400119-131280 400120-131280 400121-131280 400122-131280 400123-131280 400124-131280 400125-131280

H105 General Purpose Hose Air/Water • Typical Application: Air and water applications where petroleum contact is limited; some agricultural solutions • Inner Tube: EPDM • Reinforcement: Multi-Fiber Spiral • Cover: EPDM • Color Cover: Red • Temperature Range: Air: +32°F to +160°F (0°C to +71°C) Water: 40°F to +180°F (-40°C to +82°C) • Hose Ends: Coll-O-Crimp® U-Series; Field Attachable 057 B-Series; 105 B-Series *When used with U-Series only **When used with 105B and 057B Series only

Specifications Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H10504 1/4 5/8 300*, 175** H10506 3/8 3/4 300*, 175** H10508 1/2 7/8 300*, 150** H10512 3/4 1-3/16 300*, 150** H10516 1 1-7/16 200*

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 1200*, 700** 3 13 1200*, 700** 3-1/2 18 1200*, 600** 4-1/2 23 1200*, 600** 5-3/4 37 800 7-1/4 64

Length 50’, 600’ 50’, 600’ 50’, 600’ 50’, 600’ 50’, 300’

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400098-131280 400099-131280 400100-131280 400101-131280 400102-131280 400103-131280 400104-131280 400105-131280 400106-131280 400107-131280

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 1200 3 15 1200 3-1/2 17 1200 3-1/2 19 1200 4-1/2 27 1200 5-3/4 41 1200 7-1/4 62 900 8-3/4 101 900 10 106

No.

Vendor Part No. 400190-131280 400192-131280 400193-131280

Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H11504 1/4 19/32 300 H11505 5/16 21/32 300 H11506 3/8 23/32 300 H11508 1/2 7/8 300 H11512 3/4 1-5/32 300 H11516 1 1-7/16 300 H11520 1-1/4 1-3/4 225 H11524 1-1/2 2 225

Vendor No. H10504-50 H10504-600 H10506-50 H10506-600 H10508-50 H10508-600 H10512-50 H10512-600 H10516-50 H10516-300

Hose I.D. 1/4 *1/4 3/8 *3/8 1/2 *1/2 3/4 *3/4 1 *1

10-90 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Ft $0.78 0.66 0.96 0.87 1.21 0.98 1.41 1.10 2.23 1.81

Vendor No. H11504-50 H11504-550 H11505-50 H11505-550 H11506-50 H11506-550 H11508-50 H11508-550 H11512-50 H11512-550 H11516-50 H11516-300 H11520-50 H11520-300 H11524-50 H11524-300

Hose I.D. 1/4 *1/4 5/16 *5/16 3/8 *3/8 1/2 *1/2 3/4 *3/4 1 *1 1-1/4 *1-1/4 1-1/2 *1-1/2

Price /Ft $1.13 1.03 1.25 1.08 1.58 1.40 1.87 1.70 2.63 2.30 4.05 3.50 5.90 5.28 6.85 6.10

10_pHyd_43-96.qxd

3/11/07

2:24 PM

Page 91

GENERAL PURPOSE HYDRAULIC HOSE Medium Pressure Hydraulic Hose

*ALL STARRED ITEMS ARE BULK QUANTITIES* H435 Non-Conductive Hose

H039 Suction Hose SAE 100R4 • Marine Application J1942/1 - Hydraulic only. • MSHA Accepted • Typical Application: Hydraulic Suction Hose • Inner Tube: Nitrile Blend • Reinforcement: 3/4" - 1-1/2" 1 helical cabled wire and 1 fiber braid 2"1 helical, single-stranded wire and 1 fiber braid • Cover: Neoprene • Temperature Range: -40°F to +212°F (-40°C to +100°C) • Hose Ends: Coll-O-Crimp® U-Series for 2-20 Sizes; Coll-O-Crimp® S-Series for 12-20 Sizes; 430 U-Series for 24 & 32 Sizes; Field Attachable K-Series; 039 K-Series; 430 E-Series for 24 and 32 Sizes.

SAE 100R7 • Typical Application: Compatible with most hydraulic fluids, designed for use where electric shock hazards exist. Maximum leakage is 50 Micro Amperes per foot at 75 KV per foot for five minutes. • Inner Tube: Nylon 11 • Reinforcement: 2 Fiber Braids • Cover: Non-Conductive Polyurethane • Cover Color: Orange • Temperature Range: -40°F to +200°F (-40°C to +93°C) • Hose Ends: Coll-OCrimp® E-Series; Field Attachable 436 N-Series Specifications

Specifications Vendor No. H03912 H03916 H03920 H03924 H03932

Min.Burst Work Pressure Pressure Min.Bend Inch Merc. Wt./100 Hose I.D. Hose O.D. (PSI) (PSI) Radii Vacuum (ft) 3/4 1-3/8 300 1200 5 25 44 1 1-5/8 250 1000 6 25 66 1-1/4 1-25/32 200 800 8 25 79 1-1/2 2-5/64 150 600 10 25 96 2 2-1/2 100 400 12 25 130

Length 50’, 150’ 50’, 150’ 150’ 50’, 100’ 100’

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400126-131280 0401102 400127-131280 0446942 400128-131280 400129-131280 0446943 400130-131280

Vendor No. H03912-50 H03912-150 H03916-50 H03916-150 H03920-150 H03924-50 H03924-100 H03932-100

Hose I.D. 3/4 *3/4 1 *1 *1-1/4 1-1/2 *1-1/2 *2

Price /Ft $6.68 6.39 8.85 8.73 10.88 15.40 15.18 16.90

Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H43504 1/4 29/64 2750 H43505 5/16 9/16 2500 H43506 3/8 5/8 2250 H43508 1/2 13/16 2000 H43512 3/4 1-1/16 1250 H43516 1 1-3/8 1000

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 11000 1 5 10000 1-1/2 7 9000 2 8 8000 2-1/2 12 5000 9-1/2 19 4000 12 25

Length 50’, 500’ 50’, 500’ 50’, 250’ 50’, 250’ 50’ 50’

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400257-131280 400258-131280 400259-131280 400260-131280 400261-131280 400262-131280 400263-131280 400264-131280 400265-131280 400266-131280

Vendor No. H43504-50 H43504-500 H43505-50 H43505-500 H43506-50 H43506-250 H43508-50 H43508-250 H43512-50 H43516-50

Hose I.D. 1/4 *1/4 5/16 *5/16 3/8 *3/8 1/2 *1/2 *3/4 *1

Price /Ft $2.81 2.04 2.98 2.24 4.10 3.32 3.05 2.85 6.60 9.30

H435 Twin Line Non-Conductive Hose SAE 100R7 - Multi-Tube • Typical Application: Compatible with most hydraulic fluids, designed for use where electric shock hazards exist. Maximum leakage is 50 Micro Amperes per foot at 75 KV per foot for five minutes. • Inner Tube: Nylon 11 • Reinforcement: 2 Fiber Braids • Cover: Non-Conductive Polyurethane • Cover Color: Orange • Temperature Range: -40°F to +200°F (-40°C to +93°C) • Hose Ends: Coll-O-Crimp® ESeries; Field Attachable 436 NSeries Specifications Min. Burst Vendor Work Pressure Pressure Min. Bend Wt./100 No. Hose I.D. Hose O.D. (PSI) (PSI) Radii (ft) H43566 3/8,3/8 5/8,5/8 2,250 9,000 2 16 H43588 1/2,1/2 13/16,13/16 2,000 8,000 2-1/2 24

Length 50’, 250’ 50’, 250’

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400280-131280 400284-131280

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Vendor No. H43566-250 H43588-250

Hose I.D. *3/8,3/8 *1/2,1/2

Price /Ft $5.70 8.78

10-91 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hydraulic Hose

General Purpose Low Pressure Hydraulic Hose Cont.

10_pHyd_43-96.qxd

3/11/07

2:24 PM

Page 92

MEDIUM PRESSURE HYDRAULIC HOSES Medium Pressure Hydraulic Hose Cont.

H436 Perforated Cover Hose SAE 100R7

Hydraulic Hose

H017 Hydraulic Hose SAE100R3 • Marine application J1942/1 - Hydraulic only. • MSHA Accepted • Typical Application: Medium pressure fuel and oil lines, hydraulic return lines • Inner Tube: Nitrile • Reinforcement: 2 Fiber Braids • Cover: Neoprene • Temperature Range: -40°F to +212°F (-40°C to +100°C) • Hose Ends: Coll-OCrimp® U-Series

• Typical Application: In addition to its compatibility with most hydraulic fluids, the low effusion rate of this hose makes it ideally suited for carbon dioxide and nitrogen. Perforated cover permits breathing, eliminating condensation and blistering. • Inner Tube: Nylon 11 • Reinforcement: 2 Fiber Braids • Braids Cover: Polyurethane (Perforated) • Cover Color: Black • Temperature Range: -40°F to +200°F (-40°C to +93°C) • Hose Ends: Coll-O-Crimp® E-Series; Field Attachable 436 N-Series Specifications

Specifications Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H01704 1/4 9/16 1250 H01706 3/8 3/4 1125 H01708 1/2 15/16 1000 H01712 3/4 1-1/4 750 H01716 1 1-1/2 565 H01720 1-1/4 1-3/4 375

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 5000 3 13 4500 4 22 4000 5 28 3000 6 43 2250 8 64 1500 10 80

Length 50',250' 50',250' 50', 250' 50', 250' 50', 250' 50', 100'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400169-131280 400170-131280 400171-131280 400172-131280 400173-131280 400174-131280 400175-131280 400176-131280 400177-131280 400178-131280 400179-131280

Vendor No. H01704-50 H01704-250 H01706-50 H01706-250 H01708-50 H01708-250 H01712-50 H01712-250 H01716-50 H01716-250 H01720-50

Hose I.D. 1/4 *1/4 3/8 *3/8 1/2 *1/2 3/4 *3/4 1 *1 *1-1/4

Price /Ft $2.80 2.78 3.81 3.76 6.13 5.45 8.28 8.13 12.15 11.03 12.25

Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H43604 1/4 29/64 2750 H43605 5/16 9/16 2500 H43606 3/8 5/8 2250 H43608 1/2 51/64 2000 H43612 3/4 1-1/16 1250 H43616 1 1-3/8 1000

Min. Burst Pressure (PSI) 11000 10000 9000 8000 5000 4000

Min. Bend Wt./100 Radii (ft) 1 5 1-1/2 7 2 8 2-1/2 12 9-1/2 19 12 25

Length 50’, 500’ 50’, 500’ 50’, 250’ 50’, 250’ 50’ 50’

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400285-131280 400286-131280 400287-131280 400288-131280 400289-131280 400290-131280 400291-131280 400292-131280 400293-131280 400294-131280

Vendor No. H43604-50 H43604-500 H43605-50 H43605-500 H43606-50 H43606-250 H43608-50 H43608-250 H43612-50 H43616-50

Hose I.D. 1/4 *1/4 5/16 *5/16 3/8 *3/8 1/2 *1/2 *3/4 *1

Price /Ft $2.90 1.98 3.23 2.67 2.65 2.58 3.10 2.98 6.15 10.03

H436 Twin Line Perforated Cover Hose SAE 100R7 - Multi-Tube • Typical Application: In addition to its compatibility with most hydraulic fluids, the low effusion rate of this hose makes it ideally suited for carbon dioxide and nitrogen. Perforated cover permits breathing, eliminating condensation and blistering. • Inner Tube: Nylon 11 • Reinforcement: 2 Fiber Braids • Braids Cover: Polyurethane (Perforated) • Cover Color: Black • Temperature Range: -40°F to +200°F (-40°C to +93°C) • Hose Ends: Coll-O-Crimp® E-Series; Field Attachable 436 N-Series Specifications Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H43644 1/4,1/4 29/64,29/64 2,750 H43666 3/8,3/8 5/8,5/8 2.000 H43688 1/2,1/2 51/64,51/64 2,000

Min. Burst Pressure (PSI) 11,000 8,000 8,000

Min. Bend Wt./100 Radii (ft) 1 10 2 16 2-1/2 24

Length 50’, 250’ 50’, 250’ 50’, 250’

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400295-131280 400309-131280 400313-131280

10-92 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Vendor No. H43644-50 H43666-50 H43688-50

Hose I.D. 1/4,1/4 3/8,3/8 1/2,1/2

Price /Ft $6.03 6.65 8.10

10_pHyd_43-96.qxd

3/11/07

2:24 PM

Page 93

MEDIUM-HIGH PRESSURE HYDRAULIC HOSE

*ALL STARRED ITEMS ARE BULK QUANTITIES* H104 Hydraulic Hose SAE 100R1 Type AT • MSHA Accepted. • Typical Application: Most commonly used for medium-pressure hydraulic lines. Especially popular for farm implement hydraulic lines. • Inner Tube: Nitrile • Reinforcement: 1 Steel Braid • Cover: Neoprene • Temperature Range: -40°F to +212°F (-40°C to +100°C) • Hose Ends: Coll-O-Crimp® U-Series; Coll-O-Crimp® S-Series except 10 size; Field Attachable 104 N-Series, Z series (-4 to -10) Specifications Min. Burst Vendor Work Pressure Pressure Min. Bend Wt./100 No. Hose I.D. Hose O.D. (PSI) (PSI) Radii (ft) Length H10404 1/4 17/32 2750 11000 4 15 50’, 250’, 500’ H10406 3/8 23/32 2250 9000 5 23 50’, 250’, 500’ H10408 1/2 27/32 2000 8000 7 29 50’, 250’, 500’ H10410 5/8 31/32 1500 6000 8 35 50’, 250’ H10412 3/4 1-1/8 1250 5000 9-1/2 41 50’, 250’ H10416 1 1-7/16 1000 4000 12 55 50’, 250’ H10420 1-1/4 1-3/4 625 2500 16-1/2 85 50’, 100’

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400000-131280 400001-131280 400002-131280 400003-131280 400004-131280 400005-131280 400006-131280 400007-131280 400008-131280 400009-131280 400010-131280 400011-131280 400012-131280 400013-131280 400014-131280 400015-131280 0446962

Vendor No. H10404-50 H10404-250 H10404-500 H10406-50 H10406-250 H10406-500 H10408-50 H10408-250 H10408-500 H10410-50 H10410-250 H10412-50 H10412-250 H10416-50 H10416-250 H10420-50 H10420-100

Hose I.D. 1/4 1/4 *1/4 3/8 3/8 *3/8 1/2 1/2 *1/2 5/8 *5/8 3/4 *3/4 1 *1 1-1/4 *1-1/4

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price /Ft $2.28 2.28 2.18 2.50 2.50 2.43 2.85 2.85 2.75 3.65 3.63 4.60 4.55 7.33 7.22 12.34 12.26

• MSHA Accepted • Typical Application: Medium pressure air, fuel, grease, oil, truck and power steering lines. • Inner Tube: Nitrile • Reinforcement: 1 Steel Braid • Cover: Neoprene • Temperature Range: -40°F to +212°F (-40°C to +100°C) • Hose Ends: Coll-O-Crimp® 069 E-Series (except -32 size); Field Attachable 069 D-Series; 247 N-Series (except -20, -24 and -32 sizes) Specifications Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H16905 1/4 37/64 3000 H16906 5/16 43/64 2250 H16908 13/32 49/64 2000 H16910 1/2 59/64 1750 H16912 5/8 1-5/64 1500 H16916 7/8 1-15/64 800 H16920 1-1/8 1-1/2 625

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 12000 3-3/8 20 9000 4 23 8000 4-5/8 27 7000 5-1/2 36 6000 6-1/2 44 3200 7-3/8 46 2500 9 51

Length 50', 250' 50', 250' 50', 250' 50', 250' 50', 250' 50', 250' 50', 150'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Vendor Part No. 400243-131280 400244-131280 400245-131280 400246-131280 400247-131280 400249-131280 400250-131280 400251-131280 400252-131280 400253-131280 0446967 400254-131280

No. H16905-50 H16905-250 H16906-50 H16906-250 H16908-50 H16910-50 H16910-250 H16912-50 H16912-250 H16916-50 H16916-250 H16920-50

Hose I.D. 1/4 *1/4 5/16 *5/16 13/32 1/2 *1/2 5/8 *5/8 *7/8 7/8 *1-1/8

Price /Ft. $5.34 5.28 6.24 6.15 5.23 7.38 7.30 8.03 7.93 8.70 8.58 10.78

10-93 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hydraulic Hose

H169 Hydraulic Hose

Medium-High Pressure Hydraulic Hose

10_pHyd_43-96.qxd

3/11/07

2:24 PM

Page 94

MEDIUM - HIGH PRESSURE HYDRAULIC HOSE Medium-High Pressure Hydraulic Hose Cont. Hydraulic Hose

H145 Hydraulic Hose • SAE 100R17 Marine Application J1942/1 - Hydraulic only. • MSHA Accepted • Typical Application: Ideal for use in high-pressure lines on off-theroad construction equipment, farm equipment, and other highpressure applications where a small bend radius is needed. • Inner Tube: Nitrile • Reinforcement: 4-6 Size: 1 Steel Braid 8-16 Size: 2 Steel Braids • Cover: Neoprene • Temperature Range: 4-8 Size: -40°F to +250°F (-40°C to +121°C) 10-16 Size: -40°F to +212°F (-40°C to +100°C) • Hose Ends: Coll-OCrimp® U-Series for 612 Sizes; Coll-O-Crimp® 430 U-Series for 16 Size; Coll-O-Crimp® SSeries (except -4 and 10), Z-Series. Min. Burst Vendor Work Pressure Pressure Min. Bend Wt./100 No. Hose I.D. Hose O.D. (PSI) (PSI) Radii (ft) H14504 1/4 15/32 3000 12000 2 13 H14506 3/8 5/8 3000 12000 2-1/2 18

Length 50', 250', 500' 50', 250', 500'

H14508 H14510 H14512 H14516

50', 250', 500' 50', 250' 50', 250' 50', 250'

13/16 15/16 1-1/8 1-13/32

• MSHA Accepted • Typical Application: 3000 PSI continuous working pressure hose. Ideal for farm implement high-temperature hydraulic lines. Will work with synthetic or petroleum-based fluids. • Inner Tube: Hytrel • Reinforcement: 1 Steel Braid • Cover: Neoprene • Temperature Range: Air brake: -40°F to +250°F (-40°C to +121°C) • Hose Ends: Coll-O-Crimp® U-Series; Coll-O-Crimp® S-Series Specifications Min. Burst Vendor Work Pressure Pressure Min. Bend Wt./100 No. Hose I.D. Hose O.D. (PSI) (PSI) Radii (ft) H11404 1/4 1/2 3000 12000 4 11 H11406 3/8 41/64 3000 12000 5 18 H11408 1/2 13/16 3000 12000 7 25

Length 50', 250', 500' 50', 250', 500' 50', 250', 500'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering.

Specifications

1/2 5/8 3/4 1

H114 Hydraulic Hose

3000 3000 3000 3000

12000 12000 12000 12000

3-1/2 4 4-3/4 6

36 42 54 91

Part No. 400315-131280 400317-131280 400318-131280 400319-131280 400320-131280 400321-131280 400323-131280

Vendor No. H11404-50 H11404-500 H11406-50 H11406-250 H11406-500 H11408-50 H11408-500

Hose I.D. 1/4 *1/4 3/8 3/8 *3/8 1/2 *1/2

Price /Ft $2.35 2.33 2.70 2.58 3.15 3.53 4.08

Fastenal Branch personnel: Please Sold Request number of feet when ordering. Part No. 400324-131280 400325-131280 400326-131280 400327-131280 400328-131280 400329-131280 400330-131280 400331-131280 0446965 400332-131280 400333-131280 400334-131280 400335-131280 400336-131280 400337-131280

Vendor No. H14504-50 H14504-250 H14504-500 H14506-50 H14506-250 H14506-500 H14508-50 H14508-250 H14508-500 H14510-50 H14510-250 H14512-50 H14512-250 H14516-50 H14516-250

Hose I.D. 1/4 1/4 *1/4 3/8 3/8 *3/8 1/2 1/2 *1/2 5/8 *5/8 3/4 *3/4 1 *1

Price /Ft $2.43 2.40 2.28 2.48 2.45 2.40 3.35 3.33 3.98 5.93 5.88 7.43 7.38 10.60 10.40

H146 Hydraulic Hose • Typical Application: 3000 PSI continuous working pressure hose. Ideal for Arctic cold weather hydraulic applications, as well as for farm implement high temperature hydraulic lines. Will work with synthetic or petroleum-based fluids. • Inner Tube: Hytrel • Reinforcement: 1 Steel Braid • Cover: Abrasion Resistant Fiber Braid • Temperature Range: -65°F to +250°F (-53°C to +121°C) • Hose Ends: Coll-OCrimp® U-Series Specifications Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H14604 1/4 33/64 3000 H14606 3/8 43/64 3000 H14608 1/2 13/16 3000

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 12000 4 11 12000 5 18 12000 7 25

Length 50', 250' 50', 250' 50', 250'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400351-131280 400352-131280 400353-131280 400354-131280 400355-131280

10-94 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Vendor No. H14604-250 H14606-50 H14606-250 H14608-50 H14608-250

Hose I.D. *1/4 3/8 *3/8 1/2 *1/2

Price /Ft $3.05 2.90 2.83 4.83 4.08

10_pHyd_43-96.qxd

3/11/07

2:24 PM

Page 95

Medium-High Pressure Hydraulic Hose Cont.

Very High Pressure Hydraulic Hose

H545 Abrasion Resistant Constant Pressure Hydraulic Hose

H350 Very High Pressure Hydraulic Hose

• Typical Application: 3000 PSI constant working pressure hose with abrasion resistant hose. Ideal for logging, construction, mining and other off-highway applications. • Inner Tube: Nitrile • Reinforcement: 4-8 Size: 1 Steel Braid 8-16 Size: 2 Steel Braids • Cover: Abrasion resistant (woven nylon) • Temperature Range: -40°F to +250°F (-40°C to +121°C) • Hose Ends: Caution Coll-OCrimp® U-Series for 4-12 Sizes; Caution Coll-O-Crimp® 430 U-Series for 16 Size; CollO-Crimp® S-Series for 4, 6, 8, 12 Sizes. Specifications Min. Burst Vendor Work Pressure Pressure Min. Bend Wt./100 No. Hose I.D. Hose O.D. (PSI) (PSI) Radii (ft) Length H54504 1/4 17/32 3000 12000 2 14 50’, 250’, 500’ H54506 3/8 5/8 3000 12000 2-1/2 18 50’, 250’, 500’ H54508 1/2 13/16 3000 12000 3-1/2 32 50’, 250’, 500’ H54510 5/8 15/16 3000 12000 4 37 50’,250’ H54512 3/4 1-1/8 3000 12000 4-3/4 54 50’, 250’ H54516 1 1-13/32 3000 12000 6 86 50’, 250’

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 0400629 0400631 0400632 0400633 0400634 0400635 0400636 0400637 0400638 0400639 0400640

Vendor No. H54504-50 H54504-500 H54506-50 H54506-250 H54506-500 H54508-50 H54508-250 H54508-500 H54510-50 H54510-250 H54512-50

Hose I.D. 1/4 *1/4 3/8 3/8 *3/8 1/2 1/2 *1/2 5/8 *5/8 3/4

Price /Ft $4.35 4.08 3.83 3.70 3.60 4.88 5.88 5.63 7.80 7.55 8.95

0400641 0400642 0400643

H54512-250 H54516-50 H54516-250

*3/4 1 *1

8.68 13.93 11.69

H190 High Pressure Hydraulic Hose SAE 100R1 Type AT, EN 853 Type 1SN • MSHA Accepted/ISO 1436a • Typical Application: Transfer to hydraulic fluid, water and air • Inner Tube: Nitrile • Reinforcement: 1 Steel Braid • Cover: Vinyl Nitrile • Temp Range: Petroleum based Hydraulic Fluids. -40° to +212°F Water Based Hydraulic Fluids -40° to +158° Water +32°F to 158°F • Hose Ends: WeatherGrip “Z” Series Part No. 0400900 0400901 0400903 0400904 0400906 0400907 0400909 0400910 0400911

Vendor No. H19004 H19004-250R H19006 H19006-250R H19008 H19008-250R H19010 H19010-250R H19012

0400912 H19012-250R 0400913 H19016 0400914 H19016-250R

Min.Burst Work Pressure Pressure Min.Bend Price Hose I.D. Hose O.D. (PSI) (PSI) Radii Length /Ft 1/4 17/32 3,265 13.060 4 50' $2.56 1/4 17/32 3.265 13.060 4 250' 2.43 3/8 11/16 2,610 10,440 5 150' 2.80 3/8 11/16 2,610 10,440 5 250' 2.63 1/2 13/16 2,320 9,280 7 50' 3.23 1/2 13/16 2,320 9,280 7 250' 3.06 5/8 15/16 1,885 7,540 8 50' 3.93 5/8 15/16 1,885 7,540 8 250' 3.73 3/4 1-3/32 1,525 6,100 9-1/2 50' 5.20 3/4 1 1

1-3/32 1-13/32 1-13/32

1,525 1,275 1,275

6,100 5,100 5,100

9-1/2 12 12

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

250' 50' 250'

4.93 6.78 6.43

• Typical Application: Most commonly used for high pressure lines on off-the-road equipment, farm equipment and other high pressure applications. Will work with water/glycol, water and hydraulic fluids. • Inner Tube: Nitrile • Reinforcement: 6-12 Size: 2 Steel Braids 16 Size: 4 Spiral-Steel Braids • Cover: Neoprene • Temperature Range: 40°F to +212°F (-40°C to +100°C) • Note: Size 16 is Made to Order • Hose Ends: Coll-O-Crimp® U-Series for 6 & 8 Sizes;430 U-Series for 12 & 16 Sizes Specifications Work Min. Burst Vendor Hose Pressure Pressure No. Hose I.D. O.D. (PSI) (PSI) H35006 3/8 11/16 3500 14000 H35008 1/2 13/16 3500 14000 H35010 5/8 1 3500 14000 H35012 3/4 1-5/32 3500 14000 H35016 1 1-1/2 3500 14000

Min. Bend Radii 2-1/2 3-1/2 4 4-3/4 12

Wt./100 (ft) 29 36 60 70 140

Length 50', 250' 50', 250' 50', 250' 50', 250' 50', 150'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 0401078 0401079 0401080 0401081 0401082 0401083 0401084 0401085 0401086 0447049

Vendor No. H35006-50 H35006-250 H35008-50 H35008-250 H35010-50 H35010-250 H35012-50 H35012-250 H35016-50 H35016-150

Hose I.D. 3/8 *3/8 1/2 *1/2 5/8 *5/8 3/4 *3/4 1 *1

Price /Ft $4.28 3.88 6.03 4.79 9.10 8.13 12.33 11.70 17.05 19.78

H430 Very High Pressure Hydraulic Hose SAE 100R12 • Marine Application J1942/1 - Hydraulic only • MSHA Accepted • Hose must be skived when using 430 ‘E' Series hose ends. • Typical Application: Used for very high-pressure hydraulic lines subjected to pressure surges and flexing. Typical applications include construction, mining, farming and high-performance industrial equipment. • Inner Tube: Neoprene • Reinforcement: 4 Spiral Steel Plies • Cover: Hypalon • Cover Color: Gray • Temperature Range: -40°F to +250°F (-40°C to +121°C) • Hose Ends: Coll-O-Crimp® 430 E-Series; Coll-O-Crimp® 430 U-Series “No Skive" Specifications Min. Burst Vendor Work PressurePressure Min. Bend Wt./100 No. Hose I.D.Hose O.D. (PSI) (PSI) Radii (ft) H43008 1/2 15/16 4000 16000 7 58 H43012 3/4 1-7/32 4000 16000 9-1/2 87 H43016 1 1-33/64 4000 16000 12 140 H43020 1-1/4 1-7/8 3000 12000 16-1/2 184 H43024 1-1/2 2-1/8 2500 10000 20 210 H43032 2 2-21/32 2500 10000 25 281

Length 50' 50' 50' 50' 50' 50'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400376-131280 400377-131280 400378-131280 400379-131280 400380-131280 400381-131280

Vendor No. H43008-50 H43012-50 H43016-50 H43020-50 H43024-50 H43032-50

Hose I.D. 1/2 3/4 1 1-1/4 1-1/2 2

Price /Ft $11.85 11.82 17.33 33.50 39.43 61.53

10-95 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hydraulic Hose

MEDIUM-HIGH & VERY HIGH PRESSURE HOSE

10_pHyd_43-96.qxd

3/11/07

2:25 PM

Page 96

VERY HIGH PRESSURE HYDRAULIC HOSE H245 High Pressure Hydraulic Hose

Very High Pressure Hydraulic Hose Cont.

Exceeds SAE 100R2 Type AT, Meets SAE 100R16

Hydraulic Hose

H470 Very High Pressure Hydraulic Hose SAE 100R13 • Marine Application J1942/1 - Hydraulic only; 12-20 Sizes only. • MSHA Accepted • Typical Application: Used for very high-pressure hydraulic lines subjected to pressure surges and flexing. Typical applications include construction, mining, farming and high-performance industrial equipment. • Inner Tube: Neoprene • Reinforcement: Multi-Spiral Steel (Sizes 8, 12, 16, 4 plies) (Sizes 20, 24, 32, 6 plies) • Cover: Black Vinyl Nitrile • Cover Color: Black • Temperature Range: 8 Size: -40°F to +250°F (-40°C to +121°C) 1232 Size: -40°F to +250°F (-40°C to +121°C) • Hose Ends: Coll-O-Crimp® 470 ESeries; Coll-O-Crimp® 570 S-Series 8 Size does not meet SAE 100R13.

Specifications Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H47008* 1/2 31/32 5000 H47012 3/4 1-1/4 5000 H47016 1 1-17/32 5000 H47020 1-1/4 1-31/32 5000 H47024 1-1/2 2-1/4 5000 H47032 2 2-13/16 5000

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 20000 7 65 20000 9-1/2 109 20000 12 142 20000 16-1/2 252 20000 20 325 20000 25 505

Length 50' 50' 50' 50' 50' 50'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400382-131280 400383-131280 400384-131280 400385-131280 400386-131280 400387-131280

Vendor No. H47008 H47012 H47016 H47020 H47024 H47032

Hose I.D. 1/2 3/4 1 1-1/4 1-1/2 2

10-96 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Ft $16.16 30.34 48.51 72.86 82.88 100.86

• Marine Application J1942/1 - Hydraulic Fluid - MSHA Accepted. • Typical Application: Most commonly used for high-pressure lines on off-the-road construction equipment, farm equipment and other highpressure applications. Will work with water/glycol, water, hydraulic fluids and diesel fuel. • Inner Tube: Nitrile Blend • Reinforcement: 2 Steel Braids • Cover: Neoprene • Temperature Range: -40°F to +212°F (-40°C to +100°C) • Hose Ends: Coll-OCrimp® U-Series; Coll-O-Crimp® S-Series (except -10 size); 430 USeries for 12, 16, and 20 Sizes, Z-Series -4, -6, -8 and -10 only. Specifications Min. Burst Vendor Work Pressure Pressure Min. Bend Wt./100 No. Hose I.D. Hose O.D. (PSI) (PSI) Radii (ft) H24504 1/4 17/32 5000 20000 2 19 H24506 3/8 11/16 4000 16000 2-1/2 29 H24508 1/2 13/16 3500 14000 3-1/2 36 H24510 5/8 15/16 2750 11000 4 42 H24512 3/4 1-3/32 2250 9000 4-3/4 54 H24516 1 1-13/32 2000 8000 6 81 H24520 1-1/4 1-25/32 1625 6500 8-1/4 114

Length 50', 250', 500' 50', 250', 500' 50', 250', 500' 50', 250' 50', 250' 50', 250' 50'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400034-131280 400035-131280 400036-131280 400037-131280 400038-131280 400039-131280 400040-131280 400041-131280 0447000 400042-131280 400043-131280 400044-131280 400045-131280 400046-131280 400047-131280 400048-131280

Vendor No. H24504-50 H24504-250 H24504-500 H24506-50 H24506-250 H24506-500 H24508-50 H24508-250 H24508-500 H24510-50 H24510-250 H24512-50 H24512-250k H24516-50 H24516-250 H24520-50

Hose I.D. 1/4 1/4 *1/4 3/8 3/8 *3/8 1/2 1/2 *1/2 5/8 *5/8 3/4 *3/4 1 *1 *1-1/4

Price /Ft $3.31 3.24 3.09 4.15 4.03 3.60 4.28 4.19 3.45 5.98 4.79 6.43 6.35 8.46 8.24 26.61

10_pHyd_97-146.qxd

3/11/07

2:38 PM

Page 97

Very High Pressure Hydraulic Hose Cont.

Miscellaneous Hose

H425 High Pressure Hydraulic Hose

*ALL STARRED ITEMS ARE BULK QUANTITIES*

SAE 100R2 Type AT • MSHA Accepted. • Typical Application: Most commonly used for high-pressure lines on off-the-road construction equipment, farm equipment and other highpressure applications. • Inner Tube: Nitrile (1/4" Neoprene) • Reinforcement: 2 Steel Braids • Cover: Neoprene • Temperature Range: -40°F to +212°F (-40°C to +100°C) • Note: 430U Series hose ends may be used on sizes 12-32 only • Hose Ends: Coll-O-Crimp® U-Series except 24 and 32 Sizes; 430 U-Series; Coll-O-Crimp® S-Series for 4-20 Sizes; Field Attachable 425 N-Series; Coll-O-Crimp® 430 U-Series for 12-32 Sizes, Z-Series hose ends.

Specifications Min. Burst Vendor Work Pressure Pressure Min. Bend Wt./100 No. Hose I.D. Hose O.D. (PSI) (PSI) Radii (ft) H42504 1/4 19/32 5000 20000 4 28 H42506 3/8 3/4 4000 16000 5 38 H42508 1/2 7/8 3500 14000 7 45 H42510 5/8 1 2750 11000 8 51 H42512 3/4 1-5/32 2250 9000 9-1/2 66 H42516 1 1-1/2 2000 8000 12 95 H42520 1-1/4 1-7/8 1625 6500 16-1/2 142 H42524 1-1/2 2-5/32 1250 5000 20 176 H42532 2 2-21/32 1125 4500 25 208

Vendor No. H42504-50 H42504-250 H42504-500 H42506-50 H42506-250 H42506-500 H42508-50 H42508-250 H42508-500 H42510-50 H42510-250 H42512-50 H42512-250 H42516-50 H42516-250 H42520-50 H42520-150 H42524-50 H42524-100 H42532-50

Hose I.D. 1/4 1/4 *1/4 3/8 3/8 *3/8 1/2 1/2 *1/2 5/8 *5/8 3/4 *3/4 1 *1 1-1/4 *1-1/4 1-1/2 *1-1/2 *2

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

UL File No. MH 6776. ULMH 10198. • Typical Application: Most commonly used for medium-pressure LP gas service. UL listed for LP gas applications. • Inner Tube: Nitrile • Reinforcement: 1 Fiber Braid; 1 Stainless Steel Braid • Cover: Fiber Braid • Temperature Range: -40°F to +300°F (-40°C to +149°C) • Hose Ends: Coll-O-Crimp® 069 E-Series; Field Attachable 069 DSeries; 247 N-Series Specifications Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H36606 5/16 43/64 350 H36608 13/32 49/64 350

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 1750 4 18 1750 4-5/8 21

Length 50' 50'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Length 50', 250', 500' 50', 250', 500' 50', 250', 500' 50', 250' 50', 250' 50', 250' 50', 150' 50', 100' 50'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400016-131280 400017-131280 400018-131280 400019-131280 400020-131280 400021-131280 400022-131280 400023-131280 400024-131280 400025-131280 400026-131280 400027-131280 400028-131280 400029-131280 400030-131280 400031-131280 0447050 400032-131280 0447051 400033-131280

H366 LP Hose

Price /Ft $2.88 2.85 2.75 3.33 3.33 3.23 3.80 3.75 2.84 4.68 4.60 6.05 6.03 7.93 7.88 15.96 19.19 24.65 19.61 28.66

Part No. 400131-131280 400132-131280

Vendor No. H36606-50 H36608-50

Hose I.D. *5/16 *13/32

Price /Ft $6.48 6.73

H243 TEFLON® Hose • Typical Application: Hydraulic, air and stream lines. Particularly suited for air compressor discharge lines where vibration and high temperature are present. • Inner Tube: Teflon • Reinforcement: Single Stainless Steel Braid, 1" Size Double Stainless Steel Braid (Type 304) • Temperature Range: -65°F to +450°F (-54°C to +232°C) • Note: Not for use in applications requiring static dissipation. • Warning: For Teflon hose application, E-Series fittings must be used with H243 .030" thin wall hose only. • Hose Ends: Coll-O-Crimp® E-Series For temperatures above 300°F (149°C) Use burst pressure rating in parenthesis.

Specifications Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H24303 3/16 5/16 3000 H24304 1/4 23/64 3000 H24305 5/16 27/64 2500 H24306 3/8 1/2 2000 H24308 1/2 41/64 1750 H24312 3/4 57/64 1000 H24316 1 1-9/64 1000 Part No. 0446998 400180-131280 400181-131280 400182-131280 400184-131280 400185-131280 400186-131280 400187-131280 400188-131280 400189-131280

Vendor No. H24303-50 H24304-50 H24304-100 H24305-50 H24306-50 H24306-100 H24308-50 H24308-100 H24312-50 H24316-50

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 12000 (9600*) 2 6 12000 (9600*) 3 8 10000 (8000*) 4 10 8000 (6000*) 5 12 7000 (5500*) 6-1/2 15 4000 (3500*) 9 22 4000 (3350*) 12 49 Hose I.D. 3/16 1/4 1/4* 5/16 3/8 3/8* 1/2 1/2* 3/4* 1*

Length 50', 150' 50',100' 50',100' 50',100' 50',100' 50' 50' Price /Ft. $4.88 6.25 6.13 7.33 9.03 8.88 11.98 11.80 16.80 30.90

10-97 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hydraulic Hose

VERY HIGH PRESSURE & MISCELLANEOUS HYDRAULIC HOSE

10_pHyd_97-146.qxd

3/11/07

2:38 PM

Page 98

MISCELLANEOUS HOSE & HYDRAULIC HOSE ASSEMBLIES Miscellaneous Hoses Cont. Hydraulic Hose

H345 Pressure Washer Hose MSHA Accepted • Typical Application: A pressure wash hose that is also ideal for use in high pressure lines on off-the-road construction equipment, farm equipment and other high pressure applications where a small bend radius is needed. Will work with water/glycol, water, hydraulic fluids and diesel fuel. • Inner Tube: Nitrile • Reinforcement: 1 Steel Braid • Cover: Vinyl Nitrile • Cover Color: Blue • Temperature Range: Pressure Washer Service: Up to +200°F (+93°C) Hydraulic Service: Only -40°F to +250°F (-40°C) • Note: 50' and 100' are continuous length. • Hose Ends: Z series. Specifications Vendor No. Hose I.D. H34504 1/4 H34506 3/8 H34508 1/2

Hose O.D. 31/64 41/64 25/32

Work Min. Burst Pressure Pressure (PSI) (PSI) 3000 12000 3000 12000 3000 12000

Min. Bend Radii 2 2-1/2 3-1/2

Wt./100 (ft) Length 13 50', 100', 250', 500' 18 50', 100', 250', 500' 28 50', 100', 250', 500'

100R2-AT Hydraulic Hose Assemblies All hoses meet or exceed SAE (Society of Automotive Engineers) J517 100R2AT specifications. Each assembly is blown out with air to remove potential debris from the assembly process Smooth cover allows for easy cleaning and maintenance, making visual inspection easier for wear spots due to vibration or abrasion Tube: Black Oil-Resistant Synthetic Rubber Reinforcement: Two High Tensile Steel Wire Braids Cover: Black Oil & Ozone/Weather Resistant Synthetic Rubber Temp Range: -40°F to +212°F Fittings: Male NPT Connections (2-piece Factory Crimped) Universal Hydraulic Hose is for use with petroleum based hydraulic fluid in the construction, industrial, and agricultural markets; on road paving equipment, concrete & asphalt machinery, graders, loaders, tractors, aerial platforms, mining, dock & rail yards, etc.

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400338-131280 400339-131280 400340-131280 400342-131280 400343-131280 400344-131280 400345-131280 400346-131280 400347-131280

Vendor No. H34504-50 H34504-100 H34504-250 H34506-50 H34506-100 H34506-250 H34506-500 H34508-50 H34508-100

Hose I.D. 1/4 1/4 1/4 3/8 3/8 3/8 *3/8 1/2 1/2

10-98 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Ft $2.43 2.28 2.33 2.58 2.40 2.28 2.18 2.88 2.55

Part No. 0402498 0402499 0402500 0402501 0402502 0402503 0402504 0402505 0402506 0402507 0402508 0402509 0402510 0402511 0402512 0402513 0402514 0402515 0402516 0402517

Vendor No. 98398162 98398220 98398226 98398232 98398238 98398241 98398244 98398250 98398256 98398300 98398306 98398312 98398318 98398321 98398324 98398327 98398330 98398336 98398339 98398342

Length 36" 12" 24" 36" 48" 60" 72" 96" 120" 12" 24" 36" 48" 60" 72" 84" 96" 120" 132" 144"

Hose I.D. 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2

Work Pressure (PSI) 5000 4000 4000 4000 4000 4000 4000 4000 4000 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500

Min. Burst Pressure (PSI) 20000 16000 16000 16000 16000 16000 16000 16000 16000 14000 14000 14000 14000 14000 14000 14000 14000 14000 14000 14000

Price /Each $11.65 9.57 9.96 11.85 14.41 16.95 18.43 22.68 26.41 9.91 12.36 14.63 17.18 19.41 21.90 24.96 27.86 33.44 35.06 36.69

10_pHyd_97-146.qxd

3/11/07

2:38 PM

Page 99

CRIMP MACHINES, TOOLS AND ACCESSORIES ET4000-006 • Coll-O-Crimp® II Plus Freight May Apply Part #0401103

T-401 •

Coll-O-Crimp®

I

Freight May Apply Part #449998-131280

The Coll-O-Crimp® II Plus is ideal for factory, high performance machine operations, construction and mine locations. This machine offers the capabilities of crimping all of the crimp style hose ends Weatherhead offers. With this coverage, this heavy-duty crimper can handle all of your crimping needs.

The Coll-O-Crimp® I is the time-proven ‘Mini-Factory' that you can easily set up in your own shop. Fast, easy, compact and various power sources available make this crimper versatile for even the smallest of workshops.

Capacity: 3/16" I.D. 1 fiber braid through 2" 6 spiral hose; for hoses other than 4 and 6 spiral, conversion tooling is required.

Capacity: 3/16" I.D. 1 fiber braid through 1 3/8" I.D. 1 wire I.D. 1 wire hose and 1-1/4" ID 2 wire hose

Size: 29" high, 12" wide, 21" deep

Mounting: FH-135X or C-40X Cabinet Size: 16 1/4" high, 8" wide, 21 3/4" Deep Weight: 113 lbs. Capabilities: Can crimp up to 1-1/4" diameter and 2 wire braid hose. Ordering Information: T-401 Coll-O-Crimp® Press with tooling includes one each of the following: T-400-1 Coil-O-Crimp® Press T-400-BB Switch T-400-2C U-Series Collet - 1/4" T-400-3C U-Series Collet - 3/8" T-400-4C U-Series Collet - 1/2" T-400-5C U-Series Collet - 3/4" T-400-6C U-Series Collet - 1" T-400-10 Spacer Ring - Black T-400-11 Spacer Ring - Silver T-400-62 Spacer Ring - Yellow 36" T-421U Pump to Press Hose Assembly T-400-M Instruction Kit T-400-8 Die Ring T-421U Electric Pump (220 Volt, 1-Phase)

Mounting: Bench Weight: 550 lbs. Capabilities: Can crimp up to 2" 6-spiral hose. Ordering Information: ET400-006 Coll-O-Crimp® II Plus Press with pump and tooling package includes one each of the following: ET4000-4 Press and Pump Package T-410-4CN 430 “U" N/S Collet - 1/2" T-410-5CN 430 “U" N/S Collet - 3/4" T-410-6CN 430 “U" N/S Collet - 1" T-410-7CN 430 “U" N/S Collet - 1-1/4" T-410-8N 430 “U" N/S Collet - 1-1/2" T-410-9N 430 “U" N/S Collet - 2" T-410-22 Hose Assembly T-441 Electric Pump (220 Volt, 2-Stage) Note: These packages include tooling to crimp H430 U-Series hose.

WeatherGRIP Tooling

*T-421U-110 optional 110v, 1 phase pump (available by special order only). Number for packages with optional 110v, 1 phase pump order.

For use with new Weatherhead “Z series" WeatherGRIP fittings ET1000TP-0001 Crimp Kit for use with ET1000 Crimpers and WeatherGRIP “Z Series" Fittings

Super I T-420-N

For Braided Hose Sizes -4 thru 20 one wire and two wire

Freight May Apply Part #0401101 The Coll-O-Crimp® Super I is a versatile machine ideal for your shop, factory, construction, and mine locations. Big capacity combined with lever-activated crimping gives you wide coverage and a quick and simple way to make factoryquality hose assemblies. Capacity: 3/16" I.D. 1 fiber braid through 1 1/4" 6 spiral hose; for hoses other than 4 and 6 spiral, conversion tooling is required.

Part No. 0400915

Mounting: Bench or C-40X cabinet.

Part # 0400915 includes:

Size: 22" high, 10" wide, 20 1/2" deep Weight: 210 lbs. Capabilities: Can crimp up to 1-1/4" diameter and 2 and 4 wire braid hose. Ordering Information: T-420-N#Coll-O-Crimp® Super I Press with pump and tooling package includes one each of the following: T-420-1 Coil-O-Crimp® Super I Press T-420-25 Adapter Ring for T-400 Series Collets T-420-5CN 430 U-Series collet - 3/4" T-420-6CN 430 U-Series Collet - 1" T-400-10 Spacer Ring - Black T-400-62 Spacer Ring - Yellow T-400-2C U-Series Collet - 1/4" T-400-4C U-Series Collet - 1/2" T-400-6C U-Series Collet - 1" T-400-11 Spacer Ring - Silver T-400-3C U-Series Collet - 3/8" T-400-5C U-Series Collet - 3/4" T-410-4CN 430 U-Series Collet - 1/2" T-420-7CN 430 U-Series Collet T-420-4CN 430 U-Series Collet - 1/2" T-430-4CN 430 U-Series Collet - 1/2" T-421U Electric Pump (220 Volt, 1-Phase)

UOM /Ea ^–––

Collet Spacer Ring Vendor Part No. Fastenal Part No. Vendor Part No. Fastenal Part No. Spacer Ring Color ET400DC-M150S 0400960 ET1000SR-M100A 0400970 PURPLE ET400DC-M195S 0400961 T-400-62 449997-131280 YELLOW ET400DC-M230S 0400962 T-400-46R 0400971 BLACK/TAN T-420-86C 0400963 ET1000SR-M190D 0400972 LT. GREEN ET420DC-M380S 0400964 T-400-37 0447421 GREEN T-400-10 0447385 BLACK/TAN Pusher Extension T-400-112 0447397 TAN Vendor Part No. Fastenal Part No. ET420SR-M495A 0400974 GRAY ET-1000C-0012 N/A ET420SR-M255A 0400975 BLACK/SILVER T-420-29 0447511 ORANGE T-420-82R 0400976 BLACK/BLUE T-480-68 0447600 BLUE

*T-421U-110 optional 110v, 1 phase pump (available by special order only). Number for packages with optional 110v, 1 phase pump order.

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

10-99 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Crimping Machines

Crimp Machines, Tools and Accessories

10_pHyd_97-146.qxd

3/11/07

2:38 PM

Page 100

CRIMP MACHINES, TOOLS AND ACCESSORIES ET440TP-0001 Crimp Kit for use with T-440 Crimpers and Weather Grip “Z Series" Fittings

Crimp Machines, Tools and Accessories Cont. Crimping Machines

For Braided Hose Sizes -4 thru -16 (no -10) one wire and two wire

ET400TP-0001 Crimp Kit for use with T-400 Crimpers and Weather Grip “Z Series" Fittings For Braided Hose Sizes -4 thru 20 one wire and two wire

Part No. 0400918

Part No. 0400916

UOM /Ea ^–––

Part# 0400916 includes: Collet Spacer Ring Vendor Part No. Fastenal Part No. Vendor Part No. Fastenal Part No. Spacer Ring Color ET400DC-M150S 0400960 ET1000SR-M100A 0400970 PURPLE ET400DC-M195S 0400961 T-400-62 449997-131280 YELLOW ET400DC-M230S 0400962 T-400-46R 0400971 BLACK/TAN ET400DC-M245S 0400967 ET1000SR-M190D 0400972 LT. GREEN ET400DC-M295S 0400968 T-400-37 0447421 GREEN ET400DC-M375S 0400969 T-400-10 0447385 BLACK ET400SR-002 0400990 BLACK/GREEN T-400-48R 0400991 BLACK/ORANGE ET400SR-003 0400992 BLACK/PURPLE T-400-112 0447397 TAN

ET420TP-0001 Crimp Kit for use with T-420 Crimpers and Weather Grip “Z Series" Fittings

UOM /Ea ^–––

Part # 0400918 includes: Collet Spacer Ring Vendor Part No. Fastenal Part No. Vendor Part No. Fastenal Part No. Spacer Ring Color ET400DC-M150S 0400960 ET1000SR-M100A 0400970 PURPLE ET400DC-M195S 0400961 T-410-41 449976-131280 YELLOW ET400DC-M230S 0400962 T-400-46R 0400971 BLACK/TAN T-440-86C 0400965 ET1000SR-M190D 0400972 LT. GREEN ET400DC-M380S T-400-37 0447421 GREEN T-400-10 0447385 BLACK T-400-112 0447397 TAN ET420SR-M495A 0400974 GRAY ET420SR-M295A BLACK/SILVER T-420-29 0447511 ORANGE T-420-82R 0400976 BLACK/BLUE

ET460TP-0001 Crimp Kit for use with T-460 Crimpers and Weather Grip “Z Series" Fittings For Braided Hose Sizes -4 thru -8 one wire

For Braided Hose Sizes -4 thru 16 one wire and -4 thru -20 two wire

Part No. 0400917

UOM /Ea ^–––

Part # 0400917 includes: Collet Spacer Ring Vendor Part No. Fastenal Part No. Vendor Part No. Fastenal Part No. Spacer Ring Color ET400DC-M150S 0400960 ET1000SR-M100A 0400970 PURPLE ET400DC-M195S 0400961 T-400-62 449997-131280 YELLOW ET400DC-M230S 0400962 T-400-46R 0400971 BLACK/TAN T-420-86C 0400963 ET1000SR-M190D 0400972 LT. GREEN ET400DC-M380S T-400-37 0447421 GREEN T-400-10 0447385 BLACK/TAN T-400-112 0447397 TAN ET420SR-M495A 0400974 GRAY ET420SR-M295A BLACK/SILVER T-420-29 0447511 ORANGE T-420-82R 0400976 BLACK/BLUE

10-100 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 0400919

UOM /Ea ^–––

Part # 0400919 includes: Collet Spacer Ring Vendor Part No. Fastenal Part No. Vendor Part No. Fastenal Part No. Spacer Ring Color ET400DC-M150S 0400960 ET1000SR-M100A 0400970 PURPLE ET400DC-M195S 0400961 T-400-62 449997-131280 YELLOW ET400DC-M230S 0400962 T-400-46R 0400971 BLACK/TAN ET1000SR-M190D 0400972 LT. GREEN T-400-37 0447421 GREEN T-400-10 0447385 BLACK T-400-112 0447397 TAN

10_pHyd_97-146.qxd

3/11/07

2:38 PM

Page 101

CRIMP MACHINES, TOOLS AND ACCESS. & FILTRATION

ET480TP-0001 Crimp Kit for T-480 Crimper and Weather Grip “Z Series" Fittings

BETAfit Elements • Used for Hydraulic System Filter Replacements • High Beta stability over element life • High durability & consistent performance in systems with extreme fluid dynamics • High dirt holding capacities • Compatible with all major hydraulic fluids • Material: Metal/Plastic/Glass

For Braided Hose Sizes -4 thru -16 (not -10) for one wire and two wire

UOM /Ea ^–––

Part No. 0400920 Part # 0400920 includes:

Collet Spacer Ring Vendor Part No. Fastenal Part No. Vendor Part No. Fastenal Part No. Spacer Ring Color ET400DC-M150S 0400960 ET1000SR-M100A 0400970 PURPLE ET400DC-M195S 0400961 T-400-62 449997-131280 YELLOW ET400DC-M230S T-420-86C ET420DC-M380S

0400962 0400963 0400964

T-400-46R ET1000SR-M190D T-400-37 T-400-10 T-400-112 ET420SR-M495A ET420SR-M255A T-420-29 T-420-82R

0400971 0400972 0447421 0447385 0447397 0400974 0400975 0447511 0400976

BLACK/TAN LT. GREEN GREEN BLACK/TAN TAN GRAY BLACK/SILVER ORANGE BLACK/BLUE

CRIMPER & ACCESSORIES PART NUMBERS Part No. 449999-131280 449995-131280 449996-131280 449997-131280 0442942 0442943

Vendor No. TA-1002 T-138 T-400-12 T-400-62 C-40X FH-135X

Includes Identification Tool Hand Tube Cutter 1-1/4" Collet Yellow Spacer Ring Cabinet for T-420 and T-400 Cabinet for T-400

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Hydraulic Filtration

Filtration

Crimp Machines, Tools and Accessories Cont.

UOM /Each ^––– ––– ––– ––– ––– –––

Part No. 0423107 0423108 0423109 0423110 0423111 0423112 0423113 0423114 0423115 0423116 0423117 0423118 0423119 0423120 0423121 0423122 0423123 0423124 0423125 0423126 0423127 0423128 0423129 0423130 0423131 0423132 0423133 0423134 0423135 0423136 0423137

Price Micron Weight /Ea 3 0.55 $77.05 5 0.55 77.05 10 0.85 71.30 3 0.55 42.55 5 0.55 42.55 10 0.5 39.10 3 0.8 86.25 6 0.8 86.25 12 0.55 79.35 25 0.55 79.35 3 1.5 198.00 6 1.5 138.00 6 1.5 147.20 12 1.5 135.70 3 5 503.70 6 5 503.70 12 5.9 488.75 3 1.5 156.40 3 3.5 230.00 10 3.5 230.00 3 1.5 149.50 10 1.5 149.50 3 0.25 54.05 12 0.25 49.45 12 15 654.35 3 2 112.70 10 2 112.70 3 2.5 212.75 3 5 10

1.5lbs 1.5 1.5

138.00 138.00 132.25

HYDAC Parker Part Part Pall Part No. No. No. 2060430 925798 HC9700FKP18H 2060431 HC9700FKN18H 2060432 925799 HC9700FKS18H 2060528 925778, 932668Q HC9700FKP9H 2060529 HC9700FKN9H 2060530 925779, 932670Q, 925520 HC9700FDS9H 2060599 926697Q, 932653Q HC9600FKP8H 2060600 926843Q, 932654Q HC9600FKN8H 2060601 932340Q HC9600FKS8H 2060602 930118Q, 930119Q HC9600FKT8H 2060607 926698Q HC9600FKP13H 2060608 926845Q HC9600FKN13H 2060616 926890Q HC9600FKN16H 2060617 926888Q HC9600FKS16H 2060637 2060638 927945, 932873Q HC8300FKN39H 2060639 927946, 932874Q HC8300FKS39H 2060767 R9810H00403H-TEST HC9801FDP4H 2060789 2060791 932676Q 2060797 927723Q HC9021FDP8H 2060799 927694 HC9021FKS8H 2060836 925602Q, 932616Q HC9020FKP8H 2060838 925598, 925600Q, 932618Q HC9020FKS8H 2060846 932874Q HC8310FKS39H 2060860 927725Q HC9021FDP4H 2060862 933577Q HC9021FKS4H 2060933 HC9801FDP8 HC9801FDP8H HORZPAR-FITELEM 2065003 2065004 HC9700FKN27H 2065005

10-101 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_97-146.qxd

3/11/07

2:39 PM

Page 102

FILTRATION Filtration Cont. Hydraulic Filtration

Hydac Elements • Used for Hydraulic System Filter Replacements • High Beta stability over element life • High durability & consistent performance in systems with extreme fluid dynamics • High dirt holding capacities • Compatible with all major hydraulic fluids Part No. 0423027 0423028 0423029 0423030 0423031 0423032 0423033 0423034 0423035 0423036 0423037 0423038 0423039

HYDAC Vendor No. 2055592 2055595 2055736 2055737 2055738 2055739 2055743 2055745 2055746 2055747 2055748 2055750 2055751

Parker Vendor No. PR3309 PR3310 PR3172 PR3173 PR3174 PR3175

0423040 0423041 0423042 0423043 0423044 0423045 0423046 0423047 0423048 0423049 0423050 0423051 0423052 0423053 0423054 0423055 0423056 0423057 0423058 0423059 0423060 0423061 0423062 0423063 0423064 0423065 0423066

2055752 2055753 2055754 2055755 2055756 2055757 2055760 2055761 2055898 2055902 2055903 2055904 2055905 2055906 2055907 2055908 2055909 2055958 2055959 2055960 2055973 2055974 2055984 2055985 2055986 2055988 2055989

PR3116 PR3117 PR3143 PR3144 PR3145 PR3146

PR3201 PR3202 PR3203 PR3204 PR3114

Pall Vendor No.

HC2233FKP13H

Micron 10 20 3 5 10 20 10 3 5 10 20 3 5

Weight 1.39 1.39 1.39 1.39 1.39 1.39 2.18 2.71 2.71 2.71 2.71 0.6 0.6

Price /Ea $127.65 127.65 120.75 120.75 115.00 115.00 204.70 239.20 239.20 217.35 217.35 74.75 74.75

10 20 3 5 10 20 10 20 10 3 5 10 20 3 5 10 20 3 5 10 3 5 3 5 10 3 5

0.6 0.6 0.88 0.88 0.88 0.88 1.63 1.63 0.18 0.24 0.24 0.24 0.24 0.4 0.4 0.4 0.4 0.51 0.51 0.51 0.82 0.82 0.99 0.99 0.99 1.76 1.76

70.15 70.15 93.15 93.15 90.85 194.35 110.40 110.40 37.95 55.20 55.20 52.90 52.90 60.95 60.95 57.50 57.50 79.35 79.35 77.05 102.35 102.35 144.90 144.90 136.85 198.95 198.95

PR3033 PR3056 PR3057 PR3058 PR3059 PR3085 PR3086 PR3087 PR3088 PR3064 PR3066 PR3093 PR3094 PR3122 PR3123 PR3124 PR3151 PR3152

10-102 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 0423067 0423068 0423069 0423070 0423071 0423072 0423073 0423074 0423075 0423076 0423077 0423078 0423079

HYDAC Vendor No. 2055990 2056396 2056398 2056416 2056417 2056418 2056437 2056438 2056439 2056543 2056688 2056689 2056690

Parker Vendor No. PR3153

0423080 0423081 0423082 0423083 0423084 0423085 0423086 0423087 0423088 0423089 0423090 0423091 0423092 0423093 0423094 0423095 0423096 0423097 0423098 0423099 0423100 0423101 0423102 0423103 0423104 0423105 0423106

2055975 2057041 2059093 2059096 2059097 2059099 2059100 2059102 2059103 2059105 2059106 2059108 2059110 2059111 2059112 2060479 2060480 2060481 2060482 2060486 2060487 2060547 2065208 2066202 2066373 2069160 2075371

PR3095 934477 PR3241 PR3258 PR3259 PR3275 PR3276 PR3292 PR3293 PR3326 PR3327

PR3209 PR3210 PR3211 PR3180 PR3181 PR3182 PR3034 PR3035 PR3036 PR3037

934478 934236 934479 934570 934571 934234 934572

PR3224 934568 934569

Pall Vendor No.

Micron 10 3 10 3 5 10 3 5 10 20 3 5 10

Weight 1.76 2.93 2.93 4.74 4.74 4.74 2.65 2.65 2.65 0.29 0.29 0.29 0.29

Price /Ea $194.35 262.20 110.40 496.80 496.80 472.65 259.90 259.90 247.25 37.95 64.40 64.40 58.65

10 3 10 10 20 10 20 10 20 10 20 10 5 10 20 3 5 10 20 10 20 10 10 10 20 10 5

0.82 8.93 0.24 0.42 0.42 0.71 0.71 0.84 0.84 3.77 3.77 7.61 8.93 8.93 8.93 14.33 14.33 14.33 14.33 0.84 0.84 5.21 0.15 2.29 2.29 0.53 0.53

58.65 346.15 49.45 62.10 62.10 69.00 69.00 98.90 98.90 226.55 226.55 328.90 346.15 322.00 322.00 691.15 691.15 639.40 639.40 72.45 72.45 276.00 37.95 163.30 163.30 42.55 74.75

10_pHyd_97-146.qxd

3/11/07

2:39 PM

Page 103

U-SERIES HOSE ENDS U-Series Hose Ends Male DIN Universal Flareless Hose Ends

Light Typical Application: General purpose low, medium, and high pressure hydraulic. Compatible Hose: H017, H039, H104, H105, H114, H115, H145*, H146, H245, H324, H350, H425, H545, H325 Pressure: Determined by maximum working pressure for hose size and hose end configuration, whichever is lesser. Material: AISI/SAE 12L14 carbon steel Plating: Zinc, yellow dichromate finish Advantages: Wide selection of hose and end configurations, allowing a diverse number of applications. An ideal series to introduce hydraulics. Assemble With: T-400-1, T-410-1, T-420-1, T-465-1, T-460, T-462, T-480, ET1000 and ET4000 Label Set: FS-1100 Note: H145 1" requires 430 U-Series.

Hose x Tube 3/8 x 12 mm 1 x 28 mm

Part No. 0412746 0412747

Vendor No. 06U-10A 12U-22A

Price /Each $35.08 39.05

Vendor No. 04U-08F 04U-10F 06U-10F 06U-12F 06U-14F 08U-16F 12U-20F 12U-25F

Price /Each $37.05 28.45 28.18 31.85 33.13 33.28 51.13 46.45

Male DIN 24° Seat Flareless Heavy

BSPT Male Pipe Rigid

Hose x BSPT 1/4 x1/4 3/8 x3/8 1/2 x1/2 3/4 x3/4

Part No. 410020-131280 410021-131280 410022-131280 410023-131280

Vendor No. 04U-154 06U-156 08U-158 12U-162

Price /Each $8.58 15.74 16.62 24.48

Hose x Tube 1/4 X 8 mm 1/2 x 10 mm 3/8 X 10 mm 3/8 X 12 mm 3/8 X 14 mm 1/2 X 16 mm 3/4 X 20 mm 3/4 X 25 mm

Part No. 0412736 0412737 0412738 0412739 0412740 0412741 0412743 0412744

BSPT = British Standard Pipe Tapered

Male Pipe Rigid

Hose x Pipe 1/4 x1/8 1/4 x1/4 1/4 x3/8 1/4 x1/2 3/8 x1/4 3/8 x3/8 3/8 x1/2 1/2 x1/4

Part No. 410000-131280 410001-131280 410002-131280 410003-131280 410004-131280 410005-131280 410006-131280 410007-131280

Vendor No. 04U-102 04U-104 04U-106 04U-108 06U-104 06U-106 06U-108 08U-104

Price /Each $3.28 4.13 4.40 5.93 4.10 4.65 5.40 11.61

1/2 x3/8 1/2 x1/2 1/2 x3/4 5/8 x3/8 5/8 x1/2 5/8 x3/4 3/4 x1/2 3/4 x3/4 3/4 x 1 1 x3/4 1x1 1-1/4 x 1-1/4

410008-131280 410009-131280 410010-131280 410011-131280 410012-131280 410013-131280 410014-131280 410015-131280 410016-131280 410017-131280 410018-131280 410019-131280

08U-106 08U-108 08U-112 10U-106 10U-108 10U-112 12U-108 12U-112 12U-116 16U-112 16U-116 20U-120

5.41 5.43 8.03 13.38 11.90 10.71 11.25 10.23 12.38 12.80 15.42 32.13

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

10-103 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_97-146.qxd

3/11/07

2:39 PM

Page 104

U-SERIES HOSE ENDS U-Series Hose Ends Cont.

SAE 37° (JIC) Male Rigid

Hose Ends

BSPP 60° Cone Male Pipe Rigid

Hose x BSPP 1/4 x1/4 3/8 x3/8 3/8 x1/2 1/2 x3/8 1/2 x1/2 5/8 x5/8 3/4 x3/4 1x1

Part No. 410025-131280 410026-131280 410027-131280 410028-131280 410029-131280 410030-131280 410031-131280 410032-131280

Vendor No. 04U-P54 06U-P56 06U-P58 08U-P56 08U-P58 10U-P60 12U-P62 16U-P66

Price /Each $7.48 12.60 28.80 29.03 11.70 40.02 20.31 43.49

BSPP = British Standard Pipe Parallel

Male Pipe Swivel

Hose x Pipe 1/4 x1/4 3/8 x1/4 3/8 x3/8 3/8 x1/2 1/2 x1/2 3/4 x3/4 1x1

Part No. 410039-131280 410040-131280 410041-131280 410042-131280 410043-131280 410044-131280 410045-131280

Vendor No. O4U-J04 O6U-J04 O6U-J06 06U-J08 08U-J08 12U-J12 16U-J16

Price /Each $8.53 9.03 8.44 9.33 9.27 14.05 26.38

Swivel for installation purposes only. Not for temperatures above 200° F.

FOR-SEAL®

Hose x Tube 1/4 x1/4 1/4 x5/16 1/4 x3/8 3/8 x3/8 3/8 x1/2 3/8 x5/8 1/2 x1/2 1/2 x5/8 1/2 x3/4 5/8 x1/2 5/8 x5/8 5/8 x3/4 3/4 x5/8 3/4 x3/4 3/4 x7/8 3/4 x 1 1 x7/8 1x1 1 x 1-1/4 1-1/4 x 1-1/4

Vendor No. 04U-504 04U-505 04U-506 06U-506 06U-508 06U-510 08U-508 08U-510 08U-512 10U-508 10U-510 10U-512 12U-510 12U-512 12U-514 12U-516 16U-514 16U-516 16U-520 20U-520

Part No. 410054-131280 410055-131280 410056-131280 410057-131280 410058-131280 410059-131280 410060-131280 410061-131280 410062-131280 410063-131280 410064-131280 410065-131280 410066-131280 410067-131280 410068-131280 410069-131280 410070-131280 410071-131280 410072-131280 410077-131280

Male Straight Thread O-Ring Rigid

Price /Each $4.98 5.08 4.95 5.43 5.68 7.48 7.33 7.27 8.83 14.85 8.20 11.65 16.83 9.80 13.18 13.85 37.43 17.50 44.00 34.35

SAE 45° Flare Male Rigid

Hose x Tube 3/8 x3/8 3/4 x3/4

Part No. 410074-131280 410075-131280

Vendor No. 06U-306 12U-312

Price /Each $5.88 15.76

Inverted Male Swivel Straight

Male Rigid

Hose x Tube 1/4 x1/4 1/4 x5/16 1/4 x3/8 3/8 x3/8 3/8 x1/2 3/8 x5/8 1/2 x1/2 1/2 x5/8 1/2 x3/4 5/8 x1/2 5/8 x5/8 5/8 x3/4 3/4 x5/8 3/4 x3/4 3/4 x 1 1x1 1-1/4 x 1-1/4

Vendor No. 04U-P04 04U-P05 04U-P06 06U-P06 06U-P08 06U-P10 08U-P08 08U-P10 08U-P12 10U-P08 10U-P10 10U-P12 12U-P10 12U-P12 12U-P16 16U-P16 20U-P20

Part No. 410095-131280 410096-131280 410097-131280 410098-131280 410099-131280 410100-131280 410101-131280 410102-131280 410103-131280 410104-131280 410105-131280 410106-131280 410107-131280 410108-131280 410109-131280 410110-131280 410111-131280

Price /Each $6.80 6.63 6.73 7.05 6.30 8.90 6.20 8.65 11.33 35.86 12.03 14.45 16.73 12.73 16.93 18.70 33.78

Male Straight Thread O-Ring Swivel

Hose x Tube 1/4 x1/4 3/8 x3/8 3/8 x1/2 1/2 x1/2 1/2 x5/8 1/2 x3/4 5/8 x1/2 3/4 x5/8

Vendor No. 06U-R04 06U-R06 06U-R08 08U-R08 08U-R10 08U-R12 10U-R08 12U-R10

Part No. 0412854 410113-131280 410114-131280 410115-131280 410116-131280 410117-131280 410118-131280 410120-131280

Price /Each $16.76 8.05 8.90 8.88 9.08 17.20 53.00 22.14

Swivel for installation purposes only.

Hose x Tube 1/4 x1/4 3/8 x3/8 3/8 x1/2 1/2 x3/4 1/2 x1/2 5/8 x5/8 3/4 x3/4 3/4 x 1 1x1

Part No. 410046-131280 410047-131280 0412748 0412749 410048-131280 410049-131280 410050-131280 410051-131280 410052-131280

Vendor No. 04U-E64 06U-E66 06U-E68 08U-E72 08U-E68 10U-E70 12U-E72 12U-E76 16U-E76

Price /Each $7.57 8.83 29.13 33.05 9.98 48.93 46.31 70.50 47.56

Does not include O-ring.

Hose x Tube 1/4 x3/16 1/4 x1/4 1/4 x5/16 3/8 x1/4 3/8 x5/16 3/8 x3/8 3/8 x7/16 1/2 x1/2 1/2 x5/8

HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Each $7.68 9.55 10.05 16.04 9.88 10.13 9.48 12.33 14.05

Female Grease Tap

Hose 1/4 3/8

Part No. 410121-131280 410122-131280

Vendor No. 04U-C34 06U-C36

Price /Each $9.48 9.88

Female Pipe Rigid

Flareless Tube Rigid with Nut & Sleeve

Hose x Tube 1/4 x1/4 1/4 x5/16 3/8 x1/4 3/8 x5/16 3/8 x3/8 1/2 x1/2 1/2 x5/8 3/4 x3/4 1x1

10-104

Part No. 410076-131280 410073-131280 410078-131280 410079-131280 410080-131280 410081-131280 410082-131280 410083-131280 410084-131280

Vendor No. 04U-B03 04U-B04 04U-B05 06U-B04 06U-B05 06U-B06 06U-B07 08U-B08 08U-B10

Part No. 410085-131280 410086-131280 410087-131280 410088-131280 410089-131280 410090-131280 410091-131280 410092-131280 410093-131280

Vendor No. 04U-754 04U-755 06U-754 06U-755 06U-756 08U-758 08U-760 12U-762 16U-766

Price /Each $7.43 13.03 7.48 11.63 8.60 12.03 16.98 17.48 25.75

Hose x Pipe 1/4 x1/8 1/4 x1/4 3/8 x1/4 3/8 x3/8 1/2 x1/2 3/4 x3/4

Part No. 410123-131280 410124-131280 410125-131280 410126-131280 410127-131280 410128-131280

Vendor No. 04U-202 04U-204 06U-204 06U-206 08U-208 12U-212

Price /Each $5.33 6.98 6.90 6.55 7.43 11.25

10_pHyd_97-146.qxd

3/11/07

2:39 PM

Page 105

U-SERIES HOSE ENDS Female Swivel 30° Flare

Female FOR-SEAL Swivel Straight

Komatsu, Linkbelt, etc.

Female Pipe Swivel

Hose x Pipe 1/4 x1/4 3/8 x3/8 1/2 x1/2 3/4 x3/4 1x1

Part No. 410129-131280 410130-131280 410131-131280 410132-131280 0412750

Vendor No. 04U-254 06U-256 08U-258 12U-262 16U-266

Price /Each $16.08 17.07 18.23 28.83 36.34

Hose 1/4 3/8 1/2 5/8 3/4 1

Part No. 410181-131280 410182-131280 410183-131280 410184-131280 410185-131280 410186-131280

Vendor No. 04U-14K 06U-18K 08U-22K 10U-24K 12U-30K 16U-33K

Price /Each $18.55 16.70 19.90 34.95 27.35 31.95

BSPP 60° Cone Female Pipe Swivel

Female Straight Pipe Swivel NPSM

Hose x Pipe 1/4 x1/4 3/8 x3/8 1/2 x1/2 3/4 x3/4 1x1 1-1/4 x 1-1/4

Part No. 410133-131280 410134-131280

Vendor No. 04U-054 06U-056

Price /Each $9.03 9.70

410135-131280 410136-131280 410137-131280 410138-131280

08U-058 12U-062 16U-066 20U-070

11.55 19.35 23.40 46.08

Connects to male pipe with internal seat.

Female Swivel DIN Universal Seat Light

Hose x Tube 1/4 x 6 mm 1/4 x 8 mm 1/4 x 10 mm 3/8 x 10 mm 3/8 x 12 mm 1/2 x 15 mm 5/8 x 18 mm 3/4 x 22 mm 1 x 28 mm

Part No. 410164-131280 410165-131280 410166-131280 0412752 410167-131280 410168-131280 410169-131280 410170-131280 410171-131280

Vendor No. 04U-06C 04U-08C 04U-10C 06U-10C 06U-12C 08U-15C 10U-18C 12U-22C 16U-28C

Price /Each $11.78 10.66 9.58 27.02 9.48 12.40 19.53 24.82 43.33

Hose x BSPP 1/4 x1/4 1/4 x3/8 3/8 x3/8

Part No. 410188-131280 0412755 410189-131280

Vendor No. 04U-354 04U-356 06U-356

Price /Each $9.43 16.77 7.70

3/8 x1/2 1/2 x1/2 1/2 x5/8 5/8 x5/8 3/4 x3/4 1x1

410190-131280 410191-131280 410192-131280 410193-131280 410194-131280 410195-131280

06U-358 08U-358 08U-360 10U-360 12U-362 16U-366

10.84 11.70 13.63 38.86 16.43 24.48

Hose x Tube 1/4 x1/4 1/4 x3/8 1/4 x1/2 3/8 x1/4 3/8 x3/8 3/8 x1/2 1/2 x3/8 1/2 x1/2 1/2 x5/8 1/2 x3/4 5/8 x5/8 5/8 x3/4 3/4 x5/8 3/4 x3/4 3/4 x 1 1 x3/4 1x1 1 x 1-1/4 1-1/4 x 1-1/4

Part No. 410203-131280 410204-131280 410205-131280 410206-131280 410207-131280 410208-131280 410209-131280 410210-131280 410211-131280 410212-131280 410213-131280 410214-131280 410215-131280 410216-131280 410217-131280 410218-131280 410219-131280 410220-131280 410221-131280

Vendor No. 04U-S64 04U-S66 04U-S68 06U-S64 06U-S66 06U-S68 08U-S66 08U-S68 08U-S70 08U-S72 10U-S70 10U-S72 12U-S70 12U-S72 12U-S76 16U-S72 16U-S76 16U-S80 20U-S80

Price /Each $7.33 8.33 23.83 9.50 9.60 11.03 10.98 11.65 16.63 18.28 19.08 22.75 15.80 22.15 48.72 49.30 32.05 56.63 60.38

BSPP Flat Seat Female Swivel HIAB Cranes-Swedish

BSPP = British Standard Parallel Pipe

Female Swivel JIS 30° Flare

Hose x Tube 1/4 x1/4 3/8 x3/8 1/2 x1/2 5/8 x3/4 3/4 x3/4 1x1

Part No. 410197-131280 410198-131280 410199-131280 410200-131280 410201-131280 410202-131280

Vendor No. 04U-04L 06U-06L 08U-08L 10U-12L 12U-12L 16U-16L

Price /Each $7.88 8.78 8.23 24.81 23.60 32.78

Hose x Connector 3/8 x3/8 3/8 x1/2 1/2 x1/2 1/2 x3/4

Part No. 0412756 0412757 0412758 0412759

Vendor No. 06U-06P 06U-08P 08U-08P 08U-12P

Price /Each $34.00 35.35 44.95 40.10

Vendor No. 06U-L06

Price /Each $18.71

Banjo Ford Tractor

JIS = Japanese Industrial Standard

Female Swivel DIN Universal Seat

Hose 3/8

Part No. 410223-131280

Heavy

Hose x Tube 1/4 x 8 mm 1/4 x 10 mm 3/8 x 10 mm 3/8 x 12 mm 3/8 x 14 mm 1/2 x 16 mm 5/8 x 20 mm 3/4 x 25 mm 1 x 30 mm

Part No. 410173-131280 410174-131280 0412853 410175-131280 410176-131280 410177-131280 410178-131280 410179-131280 410180-131280

Vendor No. 04U-58C 04U-60C 06U-60C 06U-62C 06U-64C 08U-66C 10U-70C 12U-75C 16U-80C

Price /Each $11.25 17.91 23.38 16.30 20.58 18.43 42.95 33.13 59.53

*For use with H42520 only. Crimp on Super I, CollO-Crimp® II, or Coll-O-Crimp® II Plus. Includes Oring. The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

10-105 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hose Ends

U-Series Hose Ends Cont.

10_pHyd_97-146.qxd

3/11/07

2:39 PM

Page 106

U-SERIES HOSE ENDS U-Series Hose Ends Cont.

45° Hose End 7000 Ermeto® Series

Female FOR-SEAL® Swivel 45° Tube Elbow

Hose Ends

Split Flange Straight Code 61 Hose x Tube 3/8 x3/8 Hose x Flange 1/2 x1/2 3/4 x3/4 3/4 x 1 1x1 1-1/4 x 1-1/4

Part No. 410230-131280 410231-131280 410232-131280 410233-131280 410235-131280

Vendor No. 08U-G08 12U-G12 12U-G16 16U-G16 20U-G20

Price /Each $24.88 23.63 24.20 31.43 39.75

Vendor No. 06U-956

Part No. 0412761

Price /Each $18.24

SAE 37° (JIC) Female Swivel 45° Tube Elbow

O-Ring not included.

Standpipe Straight Tube

Hose x Tube 1/2 x1/2 3/4 x3/4

Part No. 410240-131280 410242-131280

Vendor No. 08U-T08 12U-T12

Price /Each $7.13 24.68

Metric Standpipe Straight Tube

Hose x Tube 1/4 x 8 mm 1/4 x 10 mm 3/8 x 10 mm 3/8 x 12 mm 3/8 x 14 mm 1/2 x 15 mm 1/2 x 16 mm 3/4 x 22 mm 3/4 x 25 mm 1 x 28 mm

Part No. 410244-131280 410245-131280 410246-131280 410247-131280 410248-131280 410249-131280 410250-131280 410262-131280 410263-131280 410264-131280

Vendor No. 04U-38T 04U-40T 06U-40T 06U-42T 06U-44T 08U-45T 08U-46T 12U-52T 12U-55T 16U-58T

Price /Each $22.80 27.90 24.00 24.40 30.19 29.50 23.45 32.47 42.18 68.35

Inverted Male Swivel 45° Tube Elbow

Hose x Tube 1/4 x1/4 1/4 x5/16 3/8 x1/4 3/8 x3/8 3/8 x3/8 3/8 x1/2 1/2 x1/2 1/2 x5/8 5/8 x3/4 3/4 x3/4 3/4 x 1 1x1

Part No. 410275-131280 410276-131280 410277-131280 410278-131280 410279-131280 410280-131280 410281-131280 410282-131280 410283-131280 410284-131280 0412765 410285-131280

Vendor No. 04U-684 04U-685 06U-684 06U-486 06U-686 06U-688 08U-688 08U-690 10U-692 12U-692 12U-696 16U-696

SAE OR JIC both both both SAE JIC both both both JIC JIC JIC JIC

Price /Each $11.60 12.13 13.05 11.75 12.88 13.78 13.90 19.18 20.93 27.20 35.75 47.85

Female Swivel DIN Universal Seat 45° Elbow (Light)

Hose x Tube 1/4 x1/4 1/4 x3/8 3/8 x3/8 1/2 x3/8 3/8 x1/2 1/2 x1/2 1/2 x5/8 5/8 x5/8 5/8 x3/4 3/4 x5/8 3/4 x 1 3/4 x3/4 1x1 1-1/4 x 1-1/4

Part No. 410297-131280 410298-131280 410299-131280 0412856 410300-131280 410301-131280 410302-131280 410303-131280 410304-131280 410305-131280 0412855 410306-131280 410308-131280 410309-131280

Vendor No. 04U-L64 04U-L66 06U-L66 08U-L66 06U-L68 08U-L68 08U-L70 10U-L70 10U-L72 12U-L70 12U-L76 12U-L72 16U-L76 20U-L80

Price /Each $12.78 13.40 13.48 15.80 16.98 15.05 23.75 24.90 27.05 27.53 33.73 28.50 43.95 72.25

Split Flange 45° Tube Elbow Code 61

Hose x Flange 1/2 x1/2 3/4 x3/4 3/4 x 1 1x1 1 x 1-1/4

Part No. 410311-131280 410312-131280 410313-131280 410314-131280 410315-131280

Vendor No. 08U-G41 12U-G42 12U-G46 16U-G46 16U-G50

Price /Each $25.23 31.70 32.23 41.63 41.53

O-Ring not included.

Split Flange 45° Tube Elbow Komatsu, Linkbelt

Hose x Tube 1/4 x 8 mm 3/8 x 10 mm 1/2 x 15 mm

Part No. 410286-131280 0412762 410289-131280

Vendor No. 04U-08D 06U-10D 08U-15D

Price /Each $20.67 27.75 23.48

BSPP 60° Cone Female Swivel 45° Elbow

Hose x Flange 5/8 x 34 mm

Part No. 410317-131280

Vendor No. 10U-K69

Price /Each $29.73

O-Ring not included.

Male Pipe Swivel 90° Elbow Hose x Tube 1/4 x3/16 1/4 x1/4 1/4 x5/16 3/8 x1/4 3/8 x5/16 3/8 x3/8 1/2 x1/2

Part No. 410267-131280 410268-131280 410269-131280 410270-131280 410271-131280 410272-131280 410274-131280

Vendor No. 04U-B43 04U-B44 04U-B45 06U-B44 06U-B45 06U-B46 08U-B48

Price /Each $9.11 8.68 11.95 13.41 11.33 11.05 12.30

Hose x BSPP 1/4 x1/4 3/8 x3/8 1/2 x1/2 1x1

Part No. 410290-131280 410291-131280 410292-131280 410295-131280

Vendor No. 04U-44P 06U-46P 08U-48P 16U-56P

Price /Each $19.15 15.05 27.75 63.73

*Part number will crimp in Coll-O-Crimp® T-410, T420, T-440 and ET4000 presses only. BSPP = British Standard Pipe Parallel

10-106 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hose x Pipe 1/4 x1/4 3/8 x1/4 3/8 x3/8 1/2 x1/2

Part No. 410318-131280 410319-131280 410320-131280 410321-131280

Vendor No. 04U-M04 06U-M04 06U-M06 08U-M08

Swivel for installation purposes only.

Price /Each $22.55 18.05 15.75 11.05

10_pHyd_97-146.qxd

3/11/07

2:39 PM

Page 107

U-Series Hose Ends Cont.

SAE 37° (JIC) Female Swivel Long Drop 90° Tube Elbow

BSPP 60° Cone Female Pipe Swivel 90° Elbow

Hose x Tube 1/4 x1/4 3/8 x1/4 3/8 x3/8 3/8 x3/8 1/2 x1/2 1/2 x5/8 3/4 x3/4 1x1

Hose x BSPP 1/4 x1/4 3/8 x3/8 1/2 x1/2 1/2 x5/8 3/4 x3/4 1x1

SAE 37° (JIC) Male Rigid 90° Elbow

Hose x Tube 3/8 x5/8 1/2 x5/8

Part No. 410322-131280 410323-131280

Vendor No. 06U-X60 08U-X60

Price /Each $18.17 18.73

Inverted Male Swivel 90° Tube Elbow

Part No. 0412768 410347-131280 410348-131280 410349-131280 410350-131280 410351-131280 410352-131280 410353-131280

Vendor No. 04U-644 06U-644 06U-446 06U-646 08U-648 08U-650 12U-652 16U-656L33

Price /Each $15.80 13.99 12.85 18.58 22.43 14.18 18.43 30.70

Female Swivel DIN Universal Seat 90° Elbow

Part No. 410366-131280 410367-131280 410368-131280 410369-131280 410371-131280 410372-131280

Vendor No. 04U-74P 06U-76P 08U-78P 08U-80P 12U-82P *16U-86P

Price /Each $28.23 25.98 19.85 36.30 32.20 55.42

*Will crimp in Coll-O-Crimp® T-410, T-440, and T-420 presses only. BSPP = British Standard Pipe Parallel (BS2779)

Female FOR-SEAL® Swivel Short Drop 90° Tube Elbow

Light Hose x Tube 1/4 x3/16 1/4 x1/4 1/4 x5/16 3/8 x1/4 3/8 x5/16 3/8 x3/8 1/2 x1/2

Part No. 410325-131280 410326-131280 410327-131280 410328-131280 410329-131280 410330-131280 410332-131280

Vendor No. 04U-B63 04U-B64 04U-B65 06U-B64 06U-B65 06U-B66 08U-B68

Price /Each $8.01 9.03 11.88 13.39 11.10 11.20 12.73

90° Hose End 7000 Ermeto® Series

Hose x Tube 1/4 x 8 mm 1/4 x 10 mm 3/8 x 10 mm 3/8 x 12 mm 1/2 x 15 mm 5/8 x 18 mm 3/4 x 22 mm

Part No. 410354-131280 410355-131280 0412769 410356-131280 410357-131280 410358-131280 410359-131280

Vendor No. 04U-58D 04U-60D 06U-60D 06U-62D 08U-65D 10U-68D 12U-72D

Price /Each $18.70 25.40 38.38 22.75 28.28 52.04 46.38

Female 240° Swivel DIN 90° Elbow Hose x Tube 3/8 x3/8

Part No. 0412767

Vendor No. 06U-976

Price /Each $18.56

Heavy

SAE 37° (JIC) Female Swivel 90° Tube Elbow Hose x Tube 3/8 x 12 mm 3/8 x 14 mm 1/2 x 16 mm 5/8 x 20 mm 3/4 x 25 mm 1 x 30 mm Hose x Tube 1/4 x1/4 1/4 x5/16 1/4 x3/8 3/8 x1/4 3/8 x3/8 3/8 x1/2 1/2 x1/2 1/2 x5/8 5/8 x5/8 5/8 x3/4 3/4 x5/8 3/4 x3/4 1x1 1-1/4 x 1-1/4

Part No. 410333-131280 410334-131280 410335-131280 410336-131280 410337-131280 410338-131280 410339-131280 410340-131280 410341-131280 410342-131280 410343-131280 410344-131280 410345-131280 410346-131280

Vendor No. 04U-664 04U-665 04U-666 06U-664 06U-666 06U-668 08U-668 08U-670 10U-670 10U-672 12U-670 12U-672 16U-676 20U-677

Price /Each $12.33 13.15 12.03 12.89 12.33 15.48 15.20 18.15 19.50 20.60 32.90 25.83 41.83 80.58

Part No. 410360-131280 410361-131280 410362-131280 410363-131280 410364-131280 410365-131280

Vendor No. 06U-62E 06U-64E 08U-66E 10U-70E *12U-75E *16U-80E

Price /Each $40.28 41.15 34.18 45.16 59.95 100.23

*Part number will crimp in Coll-O-Crimp® T-410, T420, and T-440 presses only. Includes O-ring.

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Hose x Tube 1/4 x1/4 1/4 x3/8 3/8 x1/4 3/8 x3/8 3/8 x1/2 1/2 x3/8 1/2 x1/2 1/2 x5/8 1/2 x3/4 5/8 x5/8 5/8 x3/4 3/4 x5/8 3/4 x3/4 3/4 x 1 1x1 1 x 1-1/4 1-1/4 x 1-1/4

Part No. 410374-131280 410375-131280 410376-131280 410378-131280 410379-131280 410380-131280 410381-131280 410382-131280 410383-131280 410384-131280 410385-131280 410386-131280 410387-131280 410388-131280 410389-131280 410390-131280 410391-131280

Vendor No. 04U-A24 04U-A26 06U-A24 06U-A26 06U-A28 08U-A26 08U-A28 08U-A30 08U-A32 10U-A30 10U-A32 12U-A30 12U-A32 12U-A36 16U-A36 16U-A40 20U-A40

Price /Each $12.58 13.83 14.53 13.83 16.03 32.08 16.10 22.65 41.15 23.18 25.48 29.80 28.08 60.18 40.08 79.20 74.60

Female FOR-SEAL® Swivel Medium Drop 90° Tube Elbow

Hose x Tube 1/4 x1/4 1/4 x3/8 1/4 x1/2 3/8 x3/8 3/8 x1/2 1/2 x1/2 5/8 x5/8 3/4 x3/4 1x1

Part No. 410393-131280 410394-131280 410395-131280 410396-131280 410397-131280 410399-131280 0412773 410402-131280 410403-131280

Vendor No. 04U-J34 04U-J36 04U-J38 06U-J36 06U-J38 08U-J38 10U-J40 12U-J42 16U-J46

Price /Each $13.70 15.20 30.83 14.65 17.23 18.48 21.13 30.08 39.38

10-107 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hose Ends

U-SERIES HOSE ENDS

10_pHyd_97-146.qxd

3/11/07

2:39 PM

Page 108

U-SERIES & WEATERHGRIP Z SERIES HOSE ENDS U-Series Hose Ends Cont.

Split Flange 90° Tube Elbow

Male Pipe Swivel

Code 61

Hose Ends

O-ring not included.

Female FOR-SEAL® Swivel Long Drop 90° Tube Elbow

Hose x Tube 1/4 x1/4 1/4 x3/8 3/8 x3/8 3/8 x1/2 1/2 x1/2 1/2 x5/8 5/8 x5/8 3/4 x3/4 1x1

Part No. 410405-131280 410406-131280 410407-131280 410408-131280 410409-131280 410410-131280 410411-131280 410412-131280 410413-131280

Vendor No. 04U-A64 04U-A66 06U-A66 06U-A68 08U-A68 08U-A70 10U-A70 12U-A72 16U-A76

Hose x Flange 1/2 x1/2 3/4 x3/4 3/4 x 1 1x1 1 x 1-1/4 1-1/4 x 1-1/4 1-1/4 x 1-1/2 Price /Each $14.53 14.15 14.15 15.85 16.53 22.58 24.00 30.60 42.00

SAE 37° (JIC) Female Swivel 90° Elbow

Hose x Tube 1/4 x1/4 3/8 x3/8 1/2 x1/2 1/2 x5/8 3/4 x3/4

Part No. 410416-131280 410417-131280 410418-131280 410419-131280 410421-131280

Vendor No. 04U-554 06U-556 08U-558 08U-560 12U-562

Price /Each $24.53 20.17 20.30 21.15 47.55

Male Straight Thread O-Ring Swivel 90° Elbow

Hose x Tube 1/4 x3/8 3/8 x3/8 3/8 x1/2 3/8 x5/8 1/2 x1/2 1/2 x5/8 1/2 x3/4 3/4 x3/4

Part No. 410423-131280 410424-131280 410425-131280 410426-131280 410427-131280 410428-131280 410429-131280 410430-131280

Vendor No. 04U-R66 06U-R66 06U-R68 06U-R70 08U-R68 08U-R70 08U-R72 12U-R72

Price /Each $21.65 14.35 15.03 19.68 18.30 19.00 26.58 42.18

Swivel for installation purposes only.

HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Vendor No. 08U-G71 12U-G72 12U-G76 16U-G76 16U-G80 20U-G80 20U-G84

Price /Each $29.40 33.41 32.28 42.64 44.23 50.35 65.58

WeatherGRIP Z Series Hose Ends

Part No. 0405002 0405008 0413155 0413098 0405014 0413233 0413278

Vendor No. 04Z-J04 06Z-J06 08Z-J06 06Z-J08 08Z-J08 12Z-J12 16Z-J16

Thread 1/4"-18 3/8"-18 3/8"-18 1/2"-14 1/2"-14 3/4"-14 1"-11-1/2

Hose Size 1/4" 3/8" 1-1/8" 3/8" 1/2" 3/4" 1"

Price /Ea $8.62 9.20 15.68 22.96 10.55 22.14 30.05

JIC/37° Female Swivel • Typical Application: General Purpose low, medium, and high pressure hydraulic • Compatible Hose: H104, H145, H145R, H190, H190H, H245, H280, H290, H290H, H290L, H345, H350, H400, H425 AND H579 • Pressure: Determined by maximum working pressure for hose size and hose end configuration whichever is lesser. • Material: Low Carbon Steel • Plating: Zinc; yellow dichromate finish • Advantages: Wide selection of hose and end configurations allowing a diverse number of applications • Assemble with: T400, T-410-1, T-4201, T-440, T-460, T462, T-465, T-480, ET1000 AND ET4000 Male Pipe Rigid Part No. 0413007 0405000 0413054 0413111 0413008 0405003 0413112 0413055 0405009 0405015 0413188 0413113 0405016 0413189 0413242 0413190 0413243

Vendor No. 04Z-102 04Z-104 06Z-104 08Z-104 04Z-106 06Z-106 08Z-106 06Z-108 08Z-108 10Z-108 12Z-108 08Z-112 10Z-112 12Z-112 16Z-112 12Z-116 16Z-116

Thread 1/8"-27 1/4"-18 1/4"-18 1/4"-18 3/8"-18 3/8"-18 3/8"-18 1/2"-14 1/2"-14 1/2"-14 1/2"-14 3/4"-14 3/4"-14 3/4"-14 3/4"-14 1"-11-1/2 1"-11-1/2

Hose Size 1/4" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/8" 1/2" 5/8" 3/4" 1/2" 5/8" 3/4" 1" 3/4" 1"

Price $4.14 4.03 5.70 26.98 5.64 4.40 7.19 7.91 5.31 11.65 20.87 12.76 16.01 11.14 17.55 16.34 16.68

Thread 1/4"-18 3/8"-18 1/2"-14 3/4"-14

Hose Size 1/4" 3/8" 1/2" 3/4"

Price $27.91 29.04 32.97 42.34

Female Pipe Swivel

Part No. 0413013 0413066 0413120 0413198

10-108

Part No. 410431-131280 410432-131280 410433-131280 410434-131280 410435-131280 410436-131280 410437-131280

Vendor No. 04Z-254 06Z-256 08Z-258 12Z-262

Part No.

Vendor No.

Thread

Hose Size

Price

0413021 0405001 0405004 0413022 0413075 0413023 0405005 0405006 0405010 0413176 0405011 0405018 0413207 0413128 0405019 0413208 0413256 0413209 0413129 0413210 0413257

04Z-603 04Z-604 06Z-604 04Z-605 06Z-605 04Z-606 06Z-606 06Z-608 08Z-608 10Z-608 08Z-610 10Z-610 12Z-610 08Z-612 10Z-612 12Z-612 16Z-612 12Z-614 08Z-616 12Z-616 16Z-616

3/8"-24 7/16"-20 7/16"-20 1/2"-20 1/2"-20 9/16"-18 9/16"-18 3/4"-16 3/4"-16 3/4"-16 7/8"-14 7/8"-14 7/8"-14 1-1/16"-12 1-1/16"-12 1-1/16"-12 1-1/16"-12 1-3/8"-12 1-5/16"-12 1-5/16"-12 1-5/16"-12

1/4" 1/4" 3/8" 1/4" 3/8" 1/4" 3/8" 3/8" 1/2" 5/8" 1/2" 5/8" 3/4" 1/2" 5/8" 3/4" 1" 3/4" 1/2" 3/4" 1"

$34.89 4.77 5.89 5.93 26.16 5.68 5.54 5.89 7.05 19.98 7.15 12.53 14.15 13.75 12.55 13.20 23.41 23.15 30.57 18.51 22.06

JIC/37° Female Swivel 45° Elbow

Part No. 0413030 0413031 0413032 0413082 0413083 0413136 0413137 0413178 0405022 0413214 0413261

Vendor No. 04Z-684 04Z-685 04Z-686 06Z-686 06Z-688 08Z-688 08Z-690 10Z-690 10Z-692 12Z-692 16Z-696

Thread 7/16"-20 1/2"-20 9/16"-18 9/16"-18 3/4"-16 3/4"-16 7/8"-14 7/8"-14 1-1/16"-12 1-1/16"-12 1-5/16"-12

Hose Size 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 5/8" 3/4" 1"

Price $13.09 15.88 14.63 14.18 13.63 15.23 22.62 20.83 26.10 29.68 44.36

10_pHyd_97-146.qxd

3/11/07

2:40 PM

Page 109

WEATHERGRIP Z SERIES HOSE ENDS Female FORSEAL Swivel Short Drop 90° Tube Elbow

Male Straight Thread O-Ring Rigid

JIC/37° Female Swivel 90° Elbow

Part No. 0413027 0413028 0413029 0405007 0413132 0413081 0405013 0413135 0405020 0405021 0413212 0413213 0413260 0413299

Vendor No. 04Z-664 04Z-665 04Z-666 06Z-666 08Z-666 06Z-668 08Z-668 08Z-670 10Z-670 10Z-672 12Z-672 12Z-676 16Z-676 20Z-677

Thread 7/16"-20 1/2"-20 9/16"-18 9/16"-18 9/16"-18 3/4"-16 3/4"-16 7/8"-14 7/8"-14 1-1/16"-12 1-1/16"-12 1-5/16"-12 1-5/16"-12 1-5/8"-12

Hose Size 1/4" 1/4" 1/4" 3/8" 1/2" 3/8" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 1" 1-1/4"

Price $12.79 16.15 13.70 12.69 22.25 15.93 14.89 19.42 21.86 23.07 28.39 49.42 41.67 76.97

JIC/37° Female Swivel 90° Long Drop Tube Elbow

Part No. 0413025 0413026 0413078 0413079 0405012 0413131 0413177

Vendor No. 04Z-644 04Z-645 06Z-646 06Z-648 08Z-648 08Z-650 10Z-650

Thread 7/16"-20 1/2"-20 8/16"-18 3/4"-16 3/4"-16 7/8"-14 7/8"-14

Hose Size 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8"

Price $22.44 27.25 18.48 26.95 23.42 32.05 23.24

0413211 0413259

12Z-652 16Z-656

1-1/16"-12 1-5/16"-12

3/4" 1"

36.69 54.87

JIC/37° Male Rigid

Part No. 0413045 0413046 0413047 0413102 0413103 0413160 0413161 0413162 0413186 0413236 0413237 0413280

Vendor No. 04Z-P04 04Z-P05 04Z-P06 06Z-P06 06Z-P08 08Z-P08 08Z-P10 08Z-P12 10Z-P12 12Z-P12 12Z-P16 16Z-P16

Thread 7/16"-20 1/2"-20 9/16"-18 9/16"-18 3/4"-16 3/4"-16 7/8"-14 1-1/16"-12 1-1/16"-12 1-1/16"-12 1-5/16"-12 1-5/16"-12

Hose Size 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 3/4" 3/4" 1"

Price $8.86 13.90 7.77 7.46 9.43 8.34 13.72 33.94 32.89 17.85 46.83 27.11

Female FOR-SEAL Swivel

Part No. 0413049 0413106 0413050 0413107 0413164 0413108 0413165 0413187 0413166 0405030 0413239 0413167 0405031 0413240 0413282 0413241 0413283

Vendor No. 04Z-S64 06Z-S64 04Z-S66 06Z-S66 08Z-S66 06Z-S68 08Z-S68 10Z-S68 08Z-S70 10Z-S70 12Z-S70 08Z-S72 10Z-S72 12Z-S72 16Z-S72 12Z-S76 16Z-S76

Thread 9/16"-18 9/16"-18 11/16"-16 11/16"-16 11/16"-16 13/16"-16 13/16"-16 13/16"-16 1"-14 1"-14 1"-14 1-3/16"-12 1-3/16"-12 1-3/16"-12 1-3/16"-12 1-7/16"-12 1-7/16"-12

Hose Size 1/4" 3/8" 1/4" 3/8" 1/2" 3/8" 1/2" 5/8" 1/2" 5/8" 3/4" 1/2" 5/8" 3/4" 1" 3/4" 1"

Price $10.23 22.15 10.38 11.17 19.56 11.53 12.05 13.25 19.60 16.47 27.78 23.87 23.92 23.41 47.79 29.21 34.06

Female FOR-SEAL Swivel 45° Tube Elbow

Part No. 0413017 0413018 0413019 0413073 0413074 0413125 0413126 0413174 0413202 0413127 0413175 0413203

Vendor No. 04Z-504 04Z-505 04Z-506 06Z-506 06Z-508 08Z-508 08Z-510 10Z-510 12Z-510 08Z-512 10Z-512 12Z-512

Thread 7/16"-20 1/2"-20 9/16"-18 9/16"-18 3/4"-16 3/4"-16 7/8"-14 7/8"-14 7/8"-14 1-1/16"-12 1-1/16"-12 1-1/16"-12

Hose Size 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 1/2" 5/8" 3/4"

Price $8.69 6.45 7.30 6.08 6.86 7.52 8.64 12.58 22.12 18.66 12.44 10.56

0413204 0413205 0413254

12Z-514 12Z-516 16Z-516

1-3/16"-12 1-5/16"-12 1-5/16"-12

3/4" 3/4" 1"

28.81 15.31 19.13

Part No. 0413034 0413086 0413035 0413087 0413138 0413088 0413139 0413140 0413218 0413142 0413219 0413220 0413265

Vendor No. 04Z-A24 06Z-A24 04Z-A26 06Z-A26 08Z-A26 06Z-A28 08Z-A28 08Z-A30 12Z-A30 08Z-A32 12Z-A32 12Z-A36 16Z-A36

Thread 9/16"-18 9/16"-18 11/16"-16 11/16"-16 13/16"-16 13/16"-16 13/16"-16 1"-14 1"-14 1-3/16"-12 1-3/16"-12 1-7/16"-12 1-7/16"-12

Hose Size 1/4" 3/8" 1/4" 3/8" 1/2" 3/8" 1/2" 1/2" 3/4" 1/2" 3/4" 3/4" 1"

Price $14.84 41.78 17.42 16.15 21.97 18.07 19.74 24.71 49.74 56.73 33.67 50.65 48.68

Hose Size 1/4" 1/4" 3/8" 1/4" 3/8" 1/2" 1/2" 3/4" 3/4" 1"

Price $24.98 53.44 18.70 47.52 70.18 20.74 32.80 37.52 98.29 50.55

Female FORSEAL Swivel Long Drop 90° Tube Elbow

Part No. 0413036 0413037 0413089 0413038 0413090 0413143 0413144 0413221 0413222 0413267

Vendor No. 04Z-A64 04Z-A66 06Z-A66 04Z-A68 06Z-A68 08Z-A68 08Z-A70 12Z-A72 12Z-A76 16Z-A76

Thread 9/16"-18 11/16"-16 11/16"-16 13/16"-16 13/16"-16 13/16"-16 1"-14 1-3/16"-12 1-7/16"-12 1-7/16"-12

FOR-SEAL Male Rigid

Part No. 0413042 0413096 0413097 0413148 0413223 0413224

Vendor No. 04Z-E64 06Z-E66 06Z-E68 08Z-E68 12Z-E72 12Z-E76

Thread 9/16"-18 11/16"-16 13/16"-16 13/16"-16 1-3/16"-12 1-7/16"-12

Hose Size 1/4" 3/8" 3/8" 1/2" 3/4" 3/4

Price $20.96 13.66 22.29 24.71 27.68 29.03

Does not include O-Ring

Inverted Male Swivel Straight Part No. 0413043 0413099 0413044 0413100 0413156 0413101 0413157 0413158 0405028 0413159 0413234 0413235 0413279

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Vendor No. 04Z-L64 06Z-L64 04Z-L66 06Z-L66 08Z-L66 06Z-L68 08Z-L68 08Z-L70 10Z-L70 08Z-L72 12Z-L72 12Z-L76 16Z-L76

Thread 9/16"-18 9/16"-18 11/16"-16 11/16"-16 11/16"-16 13/16"-16 13/16"-16 1"-14 1"-14 1-3/16"-12 1-3/16"-12 1-7/16"-12 1-7/16"-12

Hose Size 1/4" 3/8" 1/4" 3/8" 1/2" 3/8" 1/2" 1/2" 5/8" 1/2" 3/4" 3/4" 1"

Price $16.20 21.98 17.90 15.59 31.03 22.48 17.38 29.68 24.76 31.31 33.14 84.68 45.24

Part No. 0413039 0413091 0413092 0413145

Vendor No. 04Z-B04 06Z-B05 06Z-B06 08Z-B08

Thread 7/16"-24 1/2"-20 5/8"-18 3/4"-18

Hose Size 1/4" 3/8" 3/8" 1/2"

Price $11.14 62.76 16.34 44.19

10-109 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hose Ends

WeatherGRIP Z Series Hose Ends Cont.

10_pHyd_97-146.qxd

3/11/07

2:40 PM

Page 110

WEATHERGRIP Z SERIES HOSE ENDS WeatherGRIP Z Series Hose Ends Cont. Hose Ends

Inverted Male Swivel 45° Tube Elbow

Part No. 0413040 0413093 0413146

Vendor No. 04Z-B44 06Z-B46 08Z-B48

Thread 7/16"-24 5/8"-18 3/4"-18

Hose Size 1/4" 3/8" 1/2"

Price $33.06 28.55 64.61

Inverted Male Swivel 90° Tube Elbow

Part No. 0413041 0413094 0413095 0413147

Vendor No. 04Z-B64 06Z-B65 06Z-B66 08Z-B68

Thread 7/16"-24 1/2"-20 5/8"-18 3/4"-18

Hose Size 1/4" 3/8" 3/8" 1/2"

Price $29.35 80.12 18.29 65.05

Split Flange Straight (SAE Code 61)

Part No. 0413149 0413150 0413181 0413225 0413226 0413268

Vendor No. 08Z-G08 08Z-G12 10Z-G12 12Z-G12 12Z-G16 16Z-G16

Flange Dia. 1.19" 1.5" 1.5" 1.5" 1.75" 1.75"

Part No. 0413151 0413152 0413182 0413228 0413229 0413270 0413271

Flange Dia. 1.19" 1.5" 1.5" 1.5" 1.75" 1.75" 2"

Part No. 0413153 0413154 0413230 0413231 0413272 0413232 0413273 0413312

Hose Size 1/2" 1/2" 5/8" 3/4" 3/4" 1"

Price $27.78 37.03 55.38 26.67 41.56 34.46

Hose Size 1/2" 1/2" 5/8" 3/4" 3/4" 1" 1"

Part No. 0413014 0413067 0413068 0413121 0413200 0413253

10-110 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Flange Dia. 1.19" 1.5" 1.5" 1.5" 1.75" 2" 2" 2"

Hose Size 1/2" 1/2" 3/4" 3/4" 1" 3/4" 1" 1-1/4"

Price $32.84 37.52 34.06 36.19 44.83 174.89 46.24 50.78

Vendor No. 04Z-354 06Z-356 06Z-358 08Z-358 12Z-362 16Z-366

Thread G 1/4"-19 G 3/8"-19 G 1/2"-14 G 1/2"-14 G 3/4"-14 G 1"-11

Hose Size 1/4" 3/8" 3/8" 1/2" 3/4" 1"

Price $9.27 9.35 9.52 9.56 20.96 36.38

British Standard 60° Cone Female 45° Tube Elbow

Vendor No. 04Z-44P 06Z-46P 08Z-48P 12Z-52P 16Z-56P

Thread G1/4"-19 G3/8"-19 G1/2"-14 G3/4"-14 G1"-11

Vendor No. 04Z-74P 06Z-76P 06Z-78P 12Z-82P 16Z-86P

Hose Size 1/4" 3/8" 1/2" 3/4" 1"

Price $22.66 25.67 33.40 62.79 97.01

Thread G1/4"-19 G3/8"-19 G1/2"-14 G3/4"-14 G1"-11

Hose Size 1/4" 3/8" 3/8" 3/4" 1"

Price $12.35 13.83 28.24 38.91 74.35

Thread R 1/4"-19 R 3/8"-19 R 1/2"-14 R 3/4-14

Hose Size 1/4" 3/8" 1/2" 3/4"

Price $15.17 13.29 19.41 25.91

BSPT Male Pipe Rigid

Part No. 0413012 0413064 0413114 0413193

Vendor No. 04Z-154 06Z-156 08Z-158 12Z-162

Part No. 0413048 0413104 0413105 0413163 0413238 0413281

Vendor No. 04Z-P54 06Z-P56 06Z-P58 08Z-P58 12Z-P62 16Z-P66

Thread G1/14"-19 G3/8"-19 G1/2"-14 G1/2"-14 G3/4"-14 G1"-11

Hose Size 1/4" 3/8" 3/8" 1/2" 3/4" 1"

Price $17.50 18.21 13.20 22.17 30.05 56.41

Female Swivel DIN 24° Seat I.Rh DKO (Light)

Part No. 0413003 0413005 0413057 0413059

Vendor No. 04Z-06C 04Z-08C 06Z-10C 06Z-12C

Thread M12 X 1.5 M14 X 1.5 M16 X 1.5 M18 X 1.5

Hose Size 1/4" 1/4" 3/8" 3/8"

Price $11.97 10.95 15.76 13.58

0413116 0413169 0413195 0413249

08Z-15C 10Z-18C 12Z-22C 16Z-28C

M22 X 1.5 M26 X 1.5 M30 X 2 M36 X 2

1/2" 5/8" 3/4" 1"

17.12 25.14 33.71 44.60

Male DIN 24° Seat I.Rh (Light)

British Standard 60° Cone Female 90° Tube Elbow Part No. 0413033 0413084 0413085 0413217 0413264

Price $38.00 77.38 145.80 34.68 36.05 44.45 90.47

Vendor No. 08Z-G71 08Z-G72 12Z-G72 12Z-G76 16Z-G76 12Z-G80 16Z-G80 20Z-G80

British Standard 60° Cone Male Rigid

Bristish Standard (BSPP) 60° Cone Female Swivel Straight

Part No. 0413016 0413072 0413124 0413206 0413255

Split Flange 45° Tube Elbow (SAE Code 61)

Vendor No. 08Z-G41 08Z-G42 10Z-G42 12Z-G42 12Z-G46 16Z-G46 16Z-G50

Split Flange 90° Tube Elbow (SAE Code 61)

Part No. 0413002 0413004 0413056 0413058 0413168 0413194 0413248

Vendor No. 04Z-06A 04Z-08A 06Z-10A 06Z-12A 10Z-18A 12Z-22A 16Z-28A

Thread M12 X 1.5 M14 X 1.5 M16 X 1.5 M18 X 1.5 M26 X 1.5 M30 X 2 M36 X 2

Hose Size 1/4" 1/4" 3/8" 3/8" 5/8" 3/4" 1"

Price $10.75 10.43 11.31 10.48 26.12 34.89 58.59

Hose Size 1/4" 1/4" 3/8" 1/2" 5/8" 3/4" 1"

Price $11.97 14.72 10.32 20.36 30.03 40.46 74.57

Female Swivel DIN 24° Seat s.Rh DKO (Heavy) Part No. 0413020 0413024 0413076 0413133 0413179 0413215 0413262

Vendor No. 04Z-58C 04Z-60C 06Z-62C 08Z-66C 10Z-70C 12Z-75C 16Z-80C

Thread M16 X 1.5 M18 X 1.5 M20 X 1.5 M24 X 1.5 M30 X 2 M36 X 2 M42 X 2

10_pHyd_97-146.qxd

3/11/07

2:40 PM

Page 111

WEATHERGRIP Z SERIES & 430 U-SERIES HOSE ENDS

Female Swivel DIN 24° Seat 90° Tube Elbow s.Rh DKO (Heavy) Part No. 0413077 0413080 0413134

Vendor No. 06Z-62E 06Z-64E 08Z-66E

Thread M20 X 1.5 M22 X 1.5 M24 X 1.5

Hose Size 3/8" 3/8" 1/2"

Price $28.75 57.68 25.01

0413216 0413263

12Z-75E 16Z-80E

M36 X 2 M42 X 2

3/4" 1"

63.18 109.75

Male DIN 24° Seat s.Rh (Heavy)

430 U-Series No Skive Hose Ends Typical Applications: Very high pressure hydraulic lines subjected to pressure surges and flexing. Some applications include mining, construction, farming and high performance industrial equipment. Compatible Hose: H039, H115, H145, H245, H425, H350, H430 and H430R Pressure: Determined by maximum working pressure for hose size. Plating: Zinc, yellow dichromate finish Advantages: Excellent selection of no-skive hose ends. Can be used with Caterpillar, John Deere, and many major manufacturers of heavy equipment. Assemble with: T-410-1 Coll-O-Crimp® II and T420-1 Coll-O-Crimp® Super I, T-440-1, ET4000 Also Available: Code 62

Male Pipe NPTF Rigid Part No. 0413006 0413010 0413061 0413063 0413118 0413171 0413197 0413251

Vendor No. 04Z-08F 04Z-10F 06Z-12F 06Z-14F 08Z-16F 10Z-20F 12Z-25F 16Z-30F

Vendor No. 04Z-04L 06Z-06L 08Z-08L 12Z-12L 16Z-16L 20Z-20L

Hose Size 1/4" 1/4" 3/8" 3/8" 1/2" 5/8" 3/4" 1"

Price $18.34 26.22 10.60 40.27 15.15 28.99 69.86 73.04

Vendor No. 04Z-14K 06Z-18K 08Z-22K 10Z-24K 12Z-30K 16Z-33K

Hose x Pipe 1/2 x1/2 1/2 x3/4 3/4 x3/4 3/4 x 1 1x1 1 x 1-1/4 1-1/4 x 1-1/4 1-1/2 x 1-1/2

Part No. 0412893 0412894 410800-131280 410801-131280 410802-131280 410803-131280 410804-131280 0412895

Vendor No. 43008U-108 43008U-112 43012U-112 43012U-116 43016U-116 43016U-120 43020U-120 43024U-124

Price /Each $12.45 20.90 15.85 32.46 23.85 35.73 37.65 55.78

British Standard 60° Cone (BSPP) Male Pipe Rigid Thread G1/4"-19 G3/8"-19 G1/2"-14 G3/4"-14 G1"-11 G1-1/4"-11

Hose Size 1/4" 3/8" 1/2" 3/4" 1" 1-1/4"

Price $29.94 14.40 18.00 49.94 80.69 95.70

Female Swivel 30° Flare (Komatsu, Linkbelt)

Part No. 0413011 0413065 0413119 0413172 0413199 0413252

Hose x Tube 1/2 x1/2 3/4 x3/4 3/4 x7/8 1x1 1-1/4 x 1-1/4 1 x 1-1/4 1-1/2 x 1-1/2

Part No. 0412898 410808-131280 410809-131280 410810-131280 410811-131280 0412780 0412899

Vendor No. 43008U-508 43012U-512 43012U-514 43016U-516 43020U-520 43016U-520 43024U-524

Price /Each $10.48 25.95 31.16 43.68 51.10 49.76 57.28

Male Straight Thread O-Ring Rigid

Hose x Tube 1x1

Part No. 0412781

Vendor No. 43016U-P16

Price /Each $43.75

SAE 37° JIC Female Swivel Thread M16 X 1.5 M18 X 1.5 M20 X 1.5 M22 X 1.5 M24 X 1.5 M30 X 2 M36 X 2 M42 X 2

Female JIS 30° Flare Swivel Straight

Part No. 0413000 0413051 0413109 0413191 0413246 0413288

SAE 37° JIC Male Rigid

Thread M14 X 1.5 M18 X 1.5 M22 X 1.5 M24 X 1.5 M30 X 1.5 M33 X 1.5

Hose Size Price 1/4" $12.75 3/8" 18.92 1/2" 15.74 5/8" 31.39 3/4" 60.92 1" 89.99

Hose x Tube 3/4 x3/4 1x1

Part No. 0412777 0412778

Vendor No. 43012U-P62 43016U-P66

Price /Each $43.58 53.58

FOR-SEAL® Male Rigid

Hose x Tube 1/2 x3/8 1/2 x1/2 1/2 x5/8 1/2 x3/4 3/4 x3/4 3/4 x7/8 3/4 x 1 1 x3/4 1x1 1 x 1-1/4 1-1/4 x 1-1/4 1-1/4 x 1-1/2

Part No. 0412901 0412902 0412903 0412904 410812-131280 410813-131280 410814-131280 0412782 410815-131280 410816-131280 410817-131280 410818-131280

Vendor No. 43008U-606 43008U-608 43008U-610 43008U-612 43012U-612 43012U-614 43012U-616 43016U-612 43016U-616 43016U-620 43020U-620 43020U-624

Price /Each $20.53 19.41 24.40 26.38 17.25 27.39 25.35 27.45 22.93 48.25 46.78 69.58

Female DIN Universal Seat Swivel (Light)

Hose x Tube (mm) 3/4 x 22 mm

Part No. 0412783

Vendor No. 43012U-22C

Price /Each $51.20

Female DIN 24° Seat Swivel (Heavy) Hose x Tube 1/2 x1/2 3/4 x3/4 1x1 1-1/4 x 1-1/4

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Part No. 0412897 410805-131280 410806-131280 410807-131280

Vendor No. 43008U-E68 43012U-E72 43016U-E76 43020U-E80

Price /Each $18.84 26.67 45.28 58.75

Hose x Tube (mm) 3/4 x 25 mm 1-1/4 X 30 mm

Part No. 0412784 0412786

Vendor No. 43012U-75C 43020U-80C

Price /Each $52.98 77.53

10-111 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hose Ends

WeatherGRIP Z Series Hose Ends Cont.

10_pHyd_97-146.qxd

3/11/07

2:40 PM

Page 112

430 U-SERIES NO SKIVE HOSE ENDS 430 U-Series No Skive Hose Ends Cont.

Split Flange 22-1/2° Tube Elbow Code 61

Split Flange 45° Tube Elbow Code 61

Hose Ends

Female FOR-SEAL® Swivel Straight

Hose x Tube 1/2 x1/2 1/2 x5/8 3/4 x5/8 3/4 x3/4 3/4 x 1 1x1 1 x 1-1/4 1-1/4 x 1-1/4 1-1/2 x 1-1/2

Part No. 0412917 0412918 0412787 410825-131280 410826-131280 410827-131280 0412788 410828-131280 0412919

Vendor No. 43008U-S68 43008U-S70 43012U-S70 43012U-S72 43012U-S76 43016U-S76 43016U-S80 43020U-S80 43024U-S84

Price /Each $21.40 29.13 38.15 31.68 42.00 45.60 84.38 74.83 103.78

Hose x Flange 1/2 x1/2 3/4 x3/4 1x1 1-1/4 x 1-1/4 1-1/4 x 1-1/2 1-1/2 x 1-1/2

Part No. 0412930 410848-131280 410850-131280 410852-131280 410853-131280 0412932

Vendor No. 43008U-H01 43012U-H02 43016U-H03 43020U-H04 43020U-H05 43024U-H05

Price /Each $20.42 31.03 44.23 65.13 65.23 125.30

Split Flange 30° Tube Elbow

Hose x Flange 1/2 1/2 x3/4 3/4 x3/4 3/4 x 1 1x1 1 x 1-1/4 1-1/4 x 1-1/4 1-1/4 x 1-1/2 1-1/2 x 1-1/2

Part No. 0412943 0412944 410864-131280 410865-131280 410866-131280 410867-131280 410868-131280 410869-131280 0412946

Vendor No. 43008U-G41 43008U-G42 43012U-G42 43012U-G46 43016U-G46 43016U-G50 43020U-G50 43020U-G54 43024U-G54

Price /Each $26.33 29.19 29.73 32.60 49.20 43.73 132.07 68.83 78.98

Code 61

Split Flange 45° Tube Elbow Code 62

Split Flange Straight Code 61

Hose x Flange 1/2 x1/2 1/2 x3/4 3/4 x3/4 3/4 x 1 1x1 1 x 1-1/4 1 x 1-1/2 1-1/4 x 1-1/4 1-1/4 x 1-1/2 1-1/4 x 1-1/2 1-1/2 x 1-1/2 1-1/2 x 2

Part No. 0412920 0412921 410832-131280 410833-131280 410835-131280 410836-131280 410837-131280 410838-131280 410839-131280 410840-131280 0412922 0412923

Vendor No. 43008U-G08 43008U-G12 43012U-G12 43012U-G16 43016U-G16 43016U-G20 43016U-G24 43020U-G20 43020U-G24 43020U-G24L64 43024U-G24 43024U-G32

Price /Each $23.93 22.98 26.48 26.68 35.13 38.73 49.15 47.25 50.88 82.28 76.43 75.27

Split Flange Straight

Hose x Flange 3/4 x 1 1x1 1-1/4 x 1-1/2 1-1/2 x 1-1/2

Part No. 410855-131280 410856-131280 410859-131280 0412937

Vendor No. 43012U-H23 43016U-H23 43020U-H25 43024U-H25

Price /Each $33.48 41.80 76.08 99.72

SAE 37° JIC Female Swivel 45° Tube Elbow

Hose x Tube 1/2 x1/2 1/2 x5/8 3/4 x3/4 1x1

Part No. 0412906 0412907 410860-131280 410861-131280

Vendor No. 43008U-688 43008U-690 43012U-692 43016U-696

Price /Each $34.58 32.25 37.33 64.55

Female FOR-SEAL® Swivel 45° Tube Elbow

Part No. 0412926 0412927 410842-131280 410843-131280 410844-131280 410845-131280 410846-131280 410847-131280

Vendor No. 43008U-D08 43008U-D12 43012U-D12 43012U-D16 43016U-D16 43016U-D20 43020U-D20 43020U-D24

Price /Each $31.25 41.45 32.75 43.25 56.75 61.48 56.53 61.35

Hose x Tube 1/2 1/2 x5/8 3/4 x3/4 1x1

Part No. 0412940 0412941 410862-131280 410863-131280

Vendor No. 43008U-L68 43008U-L70 43012U-L72 43016U-L76

Price /Each $41.20 43.35 46.93 63.55

Hose x Flange 1/2 x1/2 1/2 x3/4 3/4 x3/4 3/4 x 1 1x1 1-1/4 x 1-1/4 1-1/4 x 1-1/2 1-1/2 x 1-1/2 1-1/2 x 2

HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Vendor No. 43008U-D41 43012U-D42 43012U-D46 43016U-D46 43016U-D50 43020U-D50

Price /Each $33.33 37.53 41.68 59.27 74.53 71.50

Part No. 0412953 0412954 410878-131280 410879-131280 410880-131280 410882-131280 410883-131280 0412955 0412956

Vendor No. 43008U-H51 43008U-H52 43012U-H52 43012U-H53 43016U-H53 43020U-H54 43020U-H55 43024U-H55 43024U-H56

Price /Each $27.73 30.80 32.60 40.63 52.33 79.73 82.88 109.65 129.83

Split Flange 67-1/2° Tube Elbow Code 61 Code 61

Hose x Flange 1/2 x1/2 3/4 x3/4 1x1 1 x 1-1/4 1-1/4 x 1-1/2 1-1/2 x 1-1/2

10-112

Part No. 0412949 410870-131280 410871-131280 410872-131280 410873-131280 410874-131280

Split Flange 60° Tube Elbow

Code 62

Hose x Flange 1/2 x1/2 1/2 x3/4 3/4 x3/4 3/4 x 1 1x1 1 x 1-1/4 1-1/4 x 1-1/4 1-1/4 x 1-1/2

Hose x Flange 1/2 3/4 x3/4 3/4 x 1 1x1 1 x 1-1/4 1-1/4 x 1-1/4

Part No. 0412958 410884-131280 410887-131280 410888-131280 410890-131280 0412961

Vendor No. 43008U-H61 43012U-H62 43016U-H63 43016U-H64 43020U-H65 43024U-H65

Price /Each $22.28 34.88 42.03 55.33 84.73 99.77

10_pHyd_97-146.qxd

3/11/07

2:40 PM

Page 113

430 U-SERIES , S-SERIES & N-SERIES HOSE ENDS

SAE 37° JIC Female Swivel 90° Tube Elbow

Hose x Tube 1/2 x1/2 1/2 x1/2 1/2 x1/2 1/2 x5/8 1/2 x5/8 3/4 x3/4 3/4 x3/4 1x1 1x1 1x1 1-1/4 x 1-1/4

Part No. 0412911 0412908 0412909 0412912 0412910 410891-131280 410892-131280 410893-131280 410894-131280 410895-131280 0412993

Vendor No. 43008U-668 43008U-648L36 43008U-648L45 43008U-670 43008U-650 43012U-652 43012U-672 43016U-656L33 43016U-656L56 43016U-676 43020U-677

Price /Each $36.83 28.80 32.85 38.28 39.55 43.25 38.03 61.88 64.43 64.43 82.73

Male Pipe Rigid

Split Flange 90° Tube Elbow Code 61

Hose x Flange 1/2 x1/2 1/2 x1/2 1/2 x3/4 1/2 x 1 3/4 x3/4 3/4 x3/4 3/4 x 1 3/4 x 1 1x1 1x1 1-1/4 x 1-1/4 1-1/4 x 1-1/4 1-1/4 x 1-1/4 1-1/4 x 1-1/4 1-1/4 x 1-1/4 1-1/4 x 1-1/2 1-1/2 x 1-1/2 1-1/2 x 1-1/2

Part No. 0412970 0412971 0412972 0412973 410901-131280 410902-131280 410904-131280 410905-131280 410907-131280 410909-131280 410913-131280 410914-131280 410915-131280 410916-131280 410917-131280 410918-131280 0412975 0412976

Vendor No. 43008U-G71 43008U-G71L32 43008U-G72 43008U-G76 43012U-G72 43012U-G72L37 430120U-G76 43012U-G76L31 43016U-G76 43016U-G76L46 43020U-G80 43020U-G80L31 43020U-G80L40 43020U-G80L51 43020U-G80L66 43020U-G84 43024U-G84 43024U-G84L58

Price /Each $26.85 30.23 24.24 44.03 31.70 44.60 34.73 42.58 48.33 71.80 67.68 88.58 93.90 108.48 110.13 73.55 80.98 126.80

Split Flange 90° Tube Elbow

Hose x Pipe 1/4 x1/4 3/8 x3/8 1/2 x1/2 3/4 x3/4 1x1

Part No. 412000-131280 412001-131280 412002-131280 412003-131280 412004-131280

Vendor No. O4S-104 O6S-106 O8S-108 12S-112 16S-116

Price /Each $60.68 74.45 82.28 117.00 140.95

SAE 37° (JIC) Female Swivel

Hose x Pipe 1/4 x1/4 3/8 x3/8 1/2 x1/2 3/4 x3/4 1x1 1-1/4 x 1-1/4

Part No. 412006-131280 412007-131280 412008-131280 412010-131280 412011-131280 412012-131280

Vendor SAE OR Price No. JIC /Each O4S-604 Both $65.40 O6S-606 JIC 77.93 O8S-608 Both 91.60 12S-612 JIC 135.70 16S-616 JIC 191.60 20S-620 JIC 389.00

Code 62

Female FOR-SEAL® Swivel 90° Short Drop Tube Elbow

Hose x Tube 1/2 x1/2 1/2 x5/8 3/4 x5/8 3/4 x3/4 1x1 1-1/4 x 1-1/4 1-1/4 x 1-1/2

Part No. 0412964 0412965 0412789 410896-131280 410897-131280 410898-131280 410899-131280

Vendor No. 43008U-A28 43008U-A30 43012U-A30 43012U-A32 43016U-A36 43020U-A40 43020U-A44

Price /Each $41.20 39.45 33.30 41.30 59.43 85.25 100.70

Female FOR-SEAL® Swivel 90° Long Drop Tube Elbow

425 N-Series Field Attachable Hose Ends Hose x Flange 1/2 x1/2 3/4 x3/4 3/4 x 1 1x1 1 x 1-1/4 1-1/4 x 1-1/4 1-1/4 x 1-1/2

Part No. 0412985 410920-131280 410921-131280 410922-131280 410923-131280 410924-131280 410925-131280

Vendor No. 43008U-D71 43012U-D72 43012U-D76 43016U-D76 43016U-D80 43020U-D80 43020U-D84

Price /Each $33.43 41.50 47.10 57.78 72.98 77.30 85.20

Split Flange 100° Tube Elbow Code 61

Hose x Flange 1-1/2 x 1-1/2

Part No. 0412989

Vendor No. 43024U-H85

Price /Each $109.00

S-Series Hose Ends

Hose x Tube 1/2 x1/2 1/2 x5/8 3/4 x3/4

Part No. 0412967 0412968 410900-131280

Vendor No. 43008U-A68 43008U-A70 43012U-A72

Price /Each $54.20 52.38 41.25

Typical Applications: Low, medium and high pressure hydraulic applications calling for corrosion resistance. Marine, logging, mining, etc. Compatible Hose: H039, H104, H114,H145, H245 and H425 Pressure: Determined by maximum working pressure for hose size. Material: 316 Stainless Steel Advantages: Stainless Steel protection from the elements. Assemble with: T-400-1, T-410-1, T-420-1, T-440-1, T-465-1, T-460, T-462 and ET4000

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Typical Application: High pressure hydraulic applications such as construction, farm implement and industrial equipment. Compatible Hose: H425 Pressure: Determined by maximum working pressure for hose size. Material: AISI/SAE 12L14 Carbon Steel Plating: Zinc, yellow dichromate finish Advantages: Good selection of hose ends. Nonmandrel assembly. Wide variety of applications because of its use with H425 hose. Assembly Instructions: Due to the high-torque required to assemble larger sizes, it is recommended that 425 N-Series hose ends be assembled with T-300 assembly machine. 1. Lubricate insert threads and I.D. of hose. 2. Measure from end of hose and mark the socket end depth. 3. Screw hose into socket (left-hand thread) to the depth marked on hose. 4. Screw insert into socket until insert touches socket.

Male Pipe Rigid

Hose x Pipe 1/4 x1/8 1/4 x1/4 3/8 x1/4 3/8 x3/8 1/2 x3/8 1/2 x1/2 1/2 x3/4 3/4 x3/4 1x1 1-1/4 x 1-1/4

Part No. 412559-131280 412560-131280 412561-131280 412562-131280 412563-131280 412564-131280 412565-131280 412566-131280 412567-131280 412568-131280

Vendor No. 42504N-102 42504N-104 42506N-104 42506N-106 42508N-106 42508N-108 42508N-112 42512N-112 42516N-116 42520N-120

Price /Each $26.96 18.97 10.53 12.29 11.67 10.46 36.68 23.58 25.11 99.87

10-113 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hose Ends

430 U-Series No Skive Hose Ends Cont.

10_pHyd_97-146.qxd

3/11/07

2:40 PM

Page 114

425 & 436 N-SERIES FIELD ATTACH. HOSE ENDS 425 N-Series Field Attachable Hose Ends Cont.

SAE 37° (JIC) Female Swivel 90° Tube Elbow

Hose Ends

SAE 37° (JIC) Male Rigid

Hose x Tube 1/4 x1/4 1/4 x3/8 3/8 x3/8 3/8 x1/2 1/2 x1/2

Vendor No. 42504N-504 42504N-506 42506N-506 42506N-508 42508N-508

Part No. 412571-131280 412573-131280 412574-131280 412575-131280 412576-131280

Price /Each $12.22 30.85 14.25 15.54 13.29

Hose x Tube 1/4 x1/4 3/8 x3/8 1/2 x1/2 1/2 x5/8 3/4 x3/4 1x1

Part No. 412610-131280 412611-131280 412612-131280 412613-131280 412614-131280 412615-131280

Vendor No. 42504N-664 42506N-666 42508N-668 42508N-670 42512N-672 42516N-676

SAE OR JIC Both JIC Both Both JIC JIC

Price /Each $15.00 17.27 23.17 29.78 24.22 66.95

436 N-Series Field Attachable Hose Ends

Female Pipe Swivel

Hose x Pipe 1/2 x1/2 3/4 x3/4

Vendor No. 42508N-258 42512N-262

Part No. 412580-131280 412581-131280

Price /Each $16.53 54.41

SAE 37° (JIC) Female Swivel

Hose x Tube 1/4 x1/4 1/4 x5/16 1/4 x3/8 3/8 x3/8 3/8 x1/2 1/2 x1/2 1/2 x5/8 3/4 x5/8 3/4 x3/4 3/4 x3/4 1x1 1-1/2 x 1-1/2

Part No. 412582-131280 412583-131280 412584-131280 412586-131280 412587-131280 412588-131280 412589-131280 412590-131280 412591-131280 412592-131280 412594-131280 412596-131280

Vendor No. 42504N-604 42504N-605 42504N-606 42506N-606 42506N-608 42508N-608 42508N-610 42512N-610 42512N-412 42512N-612 42516N-616 42524N-624

SAE OR JIC Both Both JIC JIC Both Both Both Both SAE JIC JIC JIC

Price /Each $8.49 12.57 8.90 9.73 10.84 12.64 19.74 26.11 19.50 21.96 28.83 154.29

Part No. 412601-131280 412602-131280 412603-131280 412604-131280 412605-131280

Vendor No. 42504N-684 42506N-686 42508N-688 42508N-690 42512N-692

10-114 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

SAE OR JIC Both JIC Both Both JIC

Male Pipe Rigid

Hose x Pipe 1/4 x1/4 3/8 x1/4 3/8 x3/8 1/2 x1/2 3/4 x3/4 1x1

Part No. 412475-131280 412476-131280 412477-131280 412479-131280 412480-131280 412481-131280

Vendor No. 43604N-104 43606N-104 43606N-106 43608N-108 43612N-112 43616N-116

Price /Each $6.73 7.70 10.39 11.88 52.20 37.25

Vendor No. 43604N-504 43604N-505 43606N-506 43606N-508 43608N-508 43608N-510

Price /Each $15.65 18.91 11.38 12.28 13.27 18.73

SAE 37° (JIC) Male Rigid

SAE 37° (JIC) Female Swivel 45° Tube Elbow

Hose x Tube 1/4 x1/4 3/8 x3/8 1/2 x1/2 1/2 x5/8 3/4 x3/4

Typical Application: Medium pressure hydraulic applications where compatibility may be a problem or where shock hazards exist. Compatible Hose: H435, H436, H435 Twinline and H436 Twinline Pressure: Determined by maximum working pressure for hose size and hose end configuration, whichever is lesser. Material: AISI/SAE 12L14 Carbon Steel Plating: Zinc, yellow dichromate finish Advantages: Good selection of hose ends. Non-mandrel assembly. Assembly Instructions: 1. Lubricate insert threads and I.D. of hose. 2. Screw hose into socket (left-hand thread) until hose bottoms. Back out 1/4 turn. 3. Screw insert into socket until insert touches socket.

Price /Each $24.20 21.20 24.75 27.56 38.38

Hose x Tube 1/4 x1/4 1/4 x5/16 3/8 x3/8 3/8 x1/2 1/2 x1/2 1/2 x5/8

Part No. 412482-131280 412483-131280 412484-131280 412485-131280 412486-131280 412487-131280

10_pHyd_97-146.qxd

3/11/07

2:41 PM

Page 115

436 & 104 N-SERIES FIELD ATTACH. HOSE ENDS 436 N-Series Field Attachable Hose Ends SAE 37° (JIC) Female Swivel

Hose x Tube 1/4 x1/4 1/4 x5/16 1/4 x3/8 3/8 x3/8 3/8 x1/2 1/2 x1/2 1/2 x5/8 3/4 x3/4 1x1

Part No. 412488-131280 412489-131280 412490-131280 412492-131280 412493-131280 412494-131280 412495-131280 412496-131280 412497-131280

Vendor No. 43604N-604 43604N-605 43604N-606 43606N-606 43606N-608 43608N-608 43608N-610 43612N-612 43616N-616

SAE OR JIC Both Both Both Both Both Both Both Both Both

Price /Each $17.45 7.99 9.97 9.48 26.56 12.77 18.81 51.93 55.25

Hose x Pipe 1/4 x1/8 1/4 x1/4 3/8 x1/4 3/8 x3/8 1/2 x3/8 1/2 x1/2 3/4 x3/4 1x1

Part No. 412502-131280 412503-131280 412504-131280 412505-131280 412506-131280 412507-131280 412509-131280 412510-131280

Vendor No. 10404N-102 10404N-104 10406N-104 10406N-106 10408N-106 10408N-108 10412N-112 10416N-116

Price /Each $19.22 9.73 8.82 12.22 12.48 11.25 38.88 49.82

SAE 37° (JIC) Male Rigid

SAE 37° (JIC) Female Swivel 45° Tube Elbow

Hose x Tube 1/4 x1/4

Part No. 412498-131280

Vendor No. 43604N-684

Price /Each $13.48

SAE 37° (JIC) Female Swivel 90° Tube Elbow

Hose x Tube 3/8 x3/8 1/2 x1/2

Part No. 412500-131280 412501-131280

Vendor No. 43606N-666 43608N-668

Part No. 412511-131280 412514-131280 412515-131280

Vendor No. 10404N-504 10406N-506 10406N-508

Price /Each $12.27 13.65 16.90

1/2 x1/2 1/2 x5/8 3/4 x3/4

412516-131280 412517-131280 412518-131280

10408N-508 10408N-510 10412N-512

13.78 16.54 65.63

SAE 37° (JIC) Female Swivel

Price /Each $18.50 24.04

104 N-Series Field Attachable Hose Ends Typical Applications: High pressure hydraulic applications such as construction, farm implement and industrial equipment. Compatible Hose: H104 Pressure:Determined by maximum working pressure for hose size and hose end configuration, whichever is lesser. Material: AISI/SAE 12L14 Carbon Steel Plating: Zinc, yellow dichromate finish Advantages: Good selection of hose ends. Non-mandrel assembly. Wide variety of applications because of its use with H104 hose. Assembly Instructions: Due to the high torque required to assemble larger sizes, it is recommended that 104 N-Series hose ends be assembled with the T300 assembly machine. 1. Lubricate insert threads and I.D. of hose. 2. Measure from end of hose and mark the socket depth. Use notch on socket. 3. Screw hose into socket (left-hand thread) to the depth marked on hose. 4. Screw insert into socket until insert touches socket.

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Hose x Tube 1/4 x1/4 3/8 x3/8 3/8 x1/2

Hose x Tube 1/4 x1/4 1/4 x5/16 1/4 x3/8 3/8 x3/8 3/8 x3/8 3/8 x1/2 1/2 x1/2 1/2 x5/8 3/4 x5/8 3/4 x3/4 3/4 x3/4 3/4 x7/8 1x1

Part No. 412523-131280 412524-131280 412525-131280 412526-131280 412527-131280 412528-131280 412529-131280 412530-131280 412531-131280 412532-131280 412533-131280 412534-131280 412535-131280

Vendor No. 10404N-604 10404N-605 10404N-606 10406N-406 10406N-606 10406N-608 10408N-608 10408N-610 10412N-610 10412N-412 10412N-612 10412N-614 10416N-616

SAE OR JIC Both Both JIC SAE JIC Both Both Both Both SAE JIC JIC JIC

Price /Each $15.25 13.44 11.41 14.22 10.84 29.39 13.65 16.48 46.15 58.37 36.85 70.25 67.20

SAE 37° (JIC) Female Swivel 45° Tube Elbow

Hose x Tube 1/4 x1/4 3/8 x3/8 1/2 x1/2

Part No. 412538-131280 412539-131280 412540-131280

Vendor No. 10404N-684 10406N-686 10408N-688

SAE OR JIC Both JIC Both

Price /Each $19.40 22.53 25.33

10-115 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hose Ends

Male Pipe Rigid

10_pHyd_97-146.qxd

3/11/07

2:41 PM

Page 116

104 N-SERIES & 057 B-SERIES ATTACH HOSE ENDS 104 N-Series Field Attachable Hose Ends

Inverted Male Connector

Hose Ends

SAE 37° (JIC) Female Swivel 90° Tube Elbow

Hose x Tube 1/4 x1/4 3/8 x3/8 1/2 x1/2

Part No. 412546-131280 412547-131280 412548-131280

Vendor No. 10404N-664 10406N-666 10408N-668

SAE OR JIC Both JIC Both

Price /Each $18.48 21.70 23.33

SAE 37° (JIC) Female Swivel Long Drop 90° Tube Elbow

Hose x Tube 5/16 x1/4 5/16 x5/16 5/16 x3/8 3/8 x5/16 3/8 x3/8

Part No. 441438-131280 441439-131280 441440-131280 441441-131280 441442-131280

Vendor No. 05705B-1598 05705B-1560 05705B-1561 05706B-1568 05706B-1570

Price /Each $3.67 3.50 3.90 2.64 3.41

Vendor No. 05706B-305

Price /Each $3.54

Vendor No. 05704B-C02 05705B-C02 05705B-C04 05706B-C02 05706B-C04 05710B-C06

Price /Each $3.47 2.61 3.62 4.15 3.49 12.68

SAE 45° Flare Connector

Hose x Tube 3/8 x5/16

Part No. 441443-131280

Male Pipe Rigid 90° Elbow Hose x Tube 1/4 x1/4 3/8 x3/8

Part No. 412552-131280 412553-131280

Vendor No. 10404N-644 10406N-646

SAE OR JIC Both JIC

Price /Each $21.30 26.55

057 B-Series Field Attachable Hose Ends Typical Application: Low pressure air, fuel and oil applications. Generally used for automotive, light truck, and small engine fuel lines. The fitting is pushed onto the hose and used with a hose clamp. Compatible Hose: H057, H105*, H115* hose (*H105, H106 and H115 for air applications only.) Pressure: Determined by maximum working pressure for hose size. Material: CA360 brass. Advantages: Easy assembly. Good selection of configurations at reasonable cost.

Hose x Pipe 1/4 x1/8 5/16 x1/8 5/16 x1/4 3/8 x1/8 3/8 x1/4 5/8 x3/8

Part No. 441454-131280 441455-131280 441456-131280 441457-131280 441458-131280 441459-131280

Inverted Male Swivel 90° Elbow

Hose x Tube 5/16 x5/16 3/8 x5/16 3/8 x5/16* 3/8 x3/8*

Part No. 441449-131280 441450-131280 441451-131280 441453-131280

Assembly Instructions: 1. Slide clamp over hose. 2. Insert barbed end of fitting into hose. 3. Locate band clamp in the middle of 057 B-Series inserts and tighten. CAUTION: Hose can be cut or damaged if over-tightened. 4. Position wire clamp behind bump on 057 B-Series insert with H057 hose only.

*Chrome Plated

Male Pipe Rigid

Inverted Male Tee Swivel

Hose x Pipe 3/16 x1/8 1/4 x1/8 1/4 x1/4 5/16 x1/8 5/16 x1/4 3/8 x1/8 3/8 x1/4 3/8 x3/8 5/8 x3/8 5/8 x1/2 3/4 x1/2

Part No. 441427-131280 441428-131280 441429-131280 441430-131280 441431-131280 441432-131280 441433-131280 441434-131280 441435-131280 441436-131280 441437-131280

Vendor No. 05703B-102 05704B-102 05704B-104 05705B-102 05705B-104 05706B-102 05706B-104 05706B-106 05710B-106 05710B-108 05712B-108

10-116 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Each $1.19 1.29 2.49 1.19 1.94 1.91 2.60 3.71 4.61 7.31 7.32

Hose x Tube 3/8 x5/16 3/8 x3/8*

Part No. 441460-131280 441461-131280

Vendor No. 05705B-B65 05706B-B65 05706B-1416 05706B-1417

Price /Each $5.41 6.73 6.25 5.95

Vendor No. 05706B-1414 05706B-1415

Price /Each $6.26 7.61

Hose Clamps for 057 B-Series & Fittings Available on Page 10-138.

10_pHyd_97-146.qxd

3/11/07

2:41 PM

Page 117

FIELD ATTACHABLE HOSE ENDS & SPLIT FLANGE KITS

Typical Application: Low pressure hydraulic applications and suction lines. Compatible Hose: H039 and H039H Pressure: Determined by maximum working pressure for hose size. Material: 12L14 Carbon Steel Plating: Zinc, yellow dichromate finish Assembly Instructions: 1. Lubricate insert and hose I.D. 2. Push hose on barbed stand pipe. Be sure hose is bottomed to clamp retainer. 3. After making sure clamp shoulders will lock in recesses of insert, draw clamps together evenly.

Male Pipe Rigid Hose x Pipe 3/4 x3/4 1x1 1-1/2 x 1-1/2

Part No. 412369-131280 412370-131280 412372-131280

Vendor No. K12N-112 K16N-116 K24N-124

Price /Each $35.77 37.65 69.27

Typical Application: Suction and return lines. Compatible Hose: H039 and H039H Pressure: Determined by maximum working pressure for hose size. Material: AISI/SAE 12L14 Carbon Steel Plating: Zinc, yellow dichromate finish Assembly Instructions: 1. Cut hose to length. Be sure the cut is square and hose is clean. Trim sharp exposed wire to prevent injury. 2. Slide clamps onto hose. 3. Push fitting into hose. Be sure the hose is bottomed against the atop ring. 4. Position clamps as shown in above diagram. Secure with a screwdriver or wrench. Note: Band-It style clamps may be used in place of worm gear clamps.

Male Pipe Rigid Hose x Pipe 3/4 x3/4 1x1 1-1/4 x 1-1/4

Code 61 Part No. 412381-131280 412382-131280 412383-131280

Vendor No. 03912K-112 03916K-116 03920K-120

Price /Each $6.25 9.25 16.00

Male Connector

Hose x Pipe 3/4 x3/4 1x1 1-1/4 x 1-1/4 1-1/2 x 1-1/2 2x2

Part No. 412376-131280 412377-131280 412378-131280 412379-131280 412380-131280

Vendor No. IKE12N-112 IKE16N-116 IKE20N-120 IKE24N-124 IKE32N-132

Price /Each $19.49 10.33 16.65 39.97 54.40

Use with H039 and H039H hose only. May be clamped with band or gear-type clamp. Used with suction hose for suction lines or return lines. For low pressure applications only.

Part No. 412384-131280 412385-131280 412386-131280

Vendor No. 03912K-612 03916K-616 03920K-620

Price /Each $8.30 11.83 22.53

009 B-Series Field Attachable Hose Ends Typical Application: Low pressure air, lube and oil Lines. Compatible Hose: H009 Pressure: Determined by maximum working pressure for hose Size. Material: CA360 Brass Advantages: Reusable and easy to assemble. An excellent fitting where low-pressure applications exist and a clamp may get in the way. Good selection of configuration at a reasonable cost. Label Set: FS-400

Male Pipe Rigid

Hose x Pipe 1/4 x1/8 1/4 x1/4

Part No. 412341-131280 412342-131280

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Part No. 412359-131280

Tube x Flange 1/2 x1/2 1/2 x3/4 3/4 x3/4 1x1 1 x 1-1/4 1-1/4 x 1-1/4 1-1/2 x 1-1/2

Part No. 419000-131280 419001-131280 419002-131280 419003-131280 419004-131280 419006-131280 419007-131280

Vendor No. 50008 50008X12 50012 50016 50016X20 50020 50024

Price /Each $22.93 28.53 13.63 15.75 21.44 21.25 37.33

Vendor No. 59008 59008X12 59012 59016 59016X20 59020 59024

Price /Each $26.80 33.73 18.43 22.80 28.63 34.40 44.70

90° Elbow Code 61

Tube x Flange 1/2 x1/2 1/2 x3/4 3/4 x3/4 1x1 1 x 1-1/4 1-1/4 x 1-1/4 1-1/2 x 1-1/2

Part No. 419018-131280 419019-131280 419020-131280 419021-131280 419022-131280 419024-131280 419025-131280

Split Flange Kits SAE Standard Pressure Series Code 61

Vendor No. 00904B-102 00904B-104

Price /Each $4.99 3.42

SAE 37° (JIC) Female Swivel

Hose x Tube 1/4 x1/4

Adapter Used with Standard Female Swivel (JIC) End (Code 61): Weatherhead split flange Adapter eliminates the need for special hose ends. Interconnect pumps and valves with SAE flange outlets using low- cost standard hose assemblies to replace equipment hose assembly. Material: Low-carbon steel Plating: Zinc, yellow dichromate finish Pressure: Code 61 - 3000 PSI working pressure (32 Sizes 2500 PSI W.P.) Label Set: FS-300

Straight

SAE 37° (JIC) Female Swivel

Hose x Tube 3/4 x3/4 1x1 1-1/4 x 1-1/4

Split Flange Adapter Kits

Vendor No. 00904B-604

Flange 1/2 3/4 1 1-1/4 1-1/2 2

Part No. 419027-131280 419028-131280 419029-131280 419030-131280 419031-131280 419032-131280

Vendor No. SFK-8 SFK-12 SFK-16 SFK-20 SFK-24 SFK-32

Price /Each $10.25 9.55 11.38 14.58 19.58 22.25

Price /Each $4.34

10-117 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hose Ends

039 K-Series Field Attachable Hose Ends

10_pHyd_97-146.qxd

3/11/07

2:41 PM

Page 118

HYDRAULIC PUMPS & PUMP ACCESSORIES Pump Accessories

Hydraulic Pumps Hydraulic Accessories

Hoses and Couplers

Hydraulic Hand Pumps 10,000 PSI. capacity. Choice of single- or 2-speed versions to power single acting cylinders. Up to 21/2'' gallon capacity available upon request. Internal relief valve. Single-acting cylinders (pump includes 2-way valve). Note: Oil capacity and usable oil capacity are in cubic inches.

Part No. 0489636 0489637 0489638 0489639 0489640 0489641

Model No. P12 P19 P55 P59 *P157 **P159

Stage 1 1,2 1 1,2 1,2 1,2

Usable Oil Capacity 9.0 20.0 45.0 45.0 137.0 137.0

Oil Capacity 12.0 24 55.0 55.0 152.0 152.0

0489675 and 0489676 Weight (lbs) 5.7 6.6 15.8 17.2 26.7 26.2

Price /Each $299.75 325.50 324.90 385.50 625.00 549.00

*Low speed shifts to high at 1400 PSI. **Low speed shifts to high at 325 PSI.

Hand Operated Pump Set Matched hydraulic system components, adapters and hydraulic spreader, contained in a rugged carrying and storage case. Portable sets are ideal for pushing, pulling, lifting, straightening, or clamping at remote job sites. Includes hand operated pump. Contents:

• Hydraulic spreader • Hand pump • 10,000 psi hyd. gauge • Tee adapter • Hose & coupler assembly • 90° V base • Threaded coupler • Serrated saddle • Flat base • Extension rod - 5" length • Extension rod - 10" length • Extension rod - 18" length • Cylinder support base • Cylinder assembly, 10 ton, 6 1/8" stroke • Storage box Part No. 0489628

Vendor No. IM10H

Oil Capacity 10 Tons

Weight (lbs) 89

Price /Each $1750.00

Air/Hydraulic Pump 0489642: Ideal for powering single acting cylinders and tools. For use with cylinder type: single-acting. Air supply required: 40-120 PSI.

0498644: Proven reliability, 98 cubic inches oil usable. Hand or foot activated. For use with cylinder type: single-acting. Air supply required: 40-120 PSI. Note: Oil capacity and usable oil capacity are in cubic inches. Part No. 0489642 0489644

Model No. PA9 PA6

Oil Capacity 35 105

Usable Oil Capacity 33.5 98

10-118 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Weight 15 lbs. 14 lbs.

Price /Each $599.00 649.00

0489677

0489678

0489679

NPT Size 3/8"

Part No. 0489675

Vendor No. 9754

3/8"

0489676

9764

3/8"

0489677

9795

3/8" 3/8"

0489678 0489679

9796 9798

Price Description /Each 6' Rubber Hose, 1/4" ID with $110.75 0489679 and Dust Cap 6' Polyurethane Hose, 1/4" 149.75 ID with 0489679 and Dust Cap Complete Coupler with Dust 58.90 Caps Female Half Coupler 35.75 Male Half Coupler 27.75

10_pHyd_97-146.qxd

3/11/07

2:42 PM

Page 119

HIGH PRESSURE HYDRAULIC VALVES & ACCESS. Misc. Hydraulic Accessories

Ideal for confined areas from 15/8" to 4" clearance. Single-acting, spring-return. 5 - 150 ton capacity. Please see your local Fastenal representative for additional sizes and custom made cylinders.

Hydraulic Spreader

Part No. 0279149

Cyl. Capacity (tons) 20

Stroke (in) 7/16

Model No. RLS200

Retracted Ht. (in) 2

Ext. Ht. (in) 2-7/16

Price /Each $601.52

Nut Splitter Model No. HS2000

Part No. 0489649

Cyl. Capacity 1 ton

Weight (lbs) 4.8

Price /Each $259.00

Hydraulic Mini Jack Five tons of power in the palm of your hand, with just over 2.5'' of clearance needed. Weighs only 4.2 lbs.

Part No. 0489650

Model No. 9105A

Part No. 0489648

“Dial in" feature on HNS150 makes adjustment of splitter simple, without the worry of damaging the bolt. Specially designed “tool steel" cutter blade penetrates the nut to the precise point where it cracks, stopping short of the bolt threads. Nut splitter features a dramatically improved cutter blade with an 800% greater resistance to chipping and breaking over previous models.

Price /Each $149.00

Vendor No. HNS150

Capacity 15 tons

Price /Each $1098.00

High Pressure Hydraulic Valves

General Purpose Cylinders In-line Flow Valves In-Line Needle Valves

25 Tons

• Phosphate coated carbon steel housing • FPM (Viton Seals) • Slotted control spindle for precise and linear flow adjustments • Graduated knob and color coded spindle for accurate flow control • Guided poppets for smoother chatter-free operation • Operating Pressure: 5000 PSI

5 Tons

10 Tons

Capacities of 5 to 100 tons, stroke length of 1'' to 16''. Single-acting, spring return. The most popular cylinders are listed below. Aluminum bronze bearing reduces wear caused by off-center loads. Maximum sized springs speed piston return and increase spring life. Solid steel cylinder body for durability. Part No. 0489629 0489630 0279150 0489656 0489631 0489632 0489633 0489634 0489635

Cyl. Capacity (tons) 5 5 10 10 10 10 25 25 55

Stroke (in) 3.25 5.25 1 2.125 4.125 6.125 4.00 6.25 6.25

Model No. C53C C55C C101C C102C C104C C106C C254C C256C C556C

Retracted Ht. (in) 6.50 8.50 3.625 4.75 6.75 9.75 8.50 10.75 11.125

Ext. Ht. (in) 9.75 13.75 4.625 6.875 10.875 15.875 12.50 17.00 17.375

Price /Each $275.35 279.00 299.00 299.00 329.00 365.00 525.00 597.00 1026.00

Ask your local Fastenal representative for other sizes and custom made cylinders.

Size 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4"

Part No. 0426981 0426982 0426983 0426984 0426985 0426986 0426987

Price /Each $30.10 31.29 39.61 43.62 58.96 122.16 205.70

In-Line Flow Control Valves • Phosphate coated carbon steel housing • FPM (Viton Seals) • Slotted control spindle for precise and linear flow adjustments • Graduated knob and color-coded spindle for accurate flow control • Guided poppets for smoother chatter-free operation • Temperature Range: -4°F to 212°F • Cracking Pressure: 7 PSI • Operating Pressure: 5000 PSI Size 1/4" 3/8" 1/2" 3/4" 1"

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Vendor No. 00705006 00705018 00705030 00705042 00705054 00705066 00705078

Vendor No. 00705518 00705530 00705542 00705554 00705566

Part No. 0426974 0426975 0426976 0426977 0426978

Price /Each $39.55 45.98 52.82 64.33 165.63

10-119 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hydraulic Accessories

“Low Profile" Cylinders

10_pHyd_97-146.qxd

3/11/07

2:42 PM

Page 120

HIGH PRESSURE HYDRAULIC VALVES & IND. HOSE Industrial Hose

High Pressure Hydraulic Valves Cont.

Industrial Hose

In-Line Check Valves

Bulk Red Rubber Air Hose Products

• Phosphate coated carbon steel housing • Metal to metal seal design • Temperature Range: -4°F to 212°F • Cracking Pressure: 7 PSI • Operating Pressure: 5000 PSI Size 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

Vendor No. 00705827 00705830 00705833 00705836 00705839 00705842 00705845 02057126 02055684

Multi-purpose air and water hose. Industrial, construction, and agricultural applications. 4:1 safety factor.

Part No. 0426965 0426966 0426967 0426968 0426969 0426970 0426971 0426972 0426973

Price /Each $19.59 24.26 25.56 34.53 42.91 69.58 120.41 155.53 255.14

Two Way High Pressure Ball Valves • Full port, unrestricted flow • Positive seal based on the “floating ball" principle • Phosphate coated steel housing, polyacetal ball seals, and fluorocarbon seals • KHB-Block Housing - 1/4"-1" • KHM-Forged Housing - 1-1/4"-2" • Temperature Range: -4°F to 220°F • Operating Pressure: 5000 PSI Size 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2"

Vendor No. 02060280 02060281 02060282 02060283 02060284 02060285 02060286

Part No. 0426989 0426990 0426991 0426992 0426993 0426994 0426995

10-120 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Each $47.63 53.77 62.98 93.54 112.89 202.50 273.47

Part No. 400403 400404 400405 400406 400407 400408 400409

Hose Lgth. (ft) 500' 500' 500' 500' 450' 400' 300'

Description 1/4" ID, 300 PSI 3/8" ID, 300 PSI 1/2" ID, 300 PSI 3/4" ID, 250 PSI 1" ID, 250 PSI 1-1/4" ID, 200 PSI 1-1/2" ID, 200 PSI

Price /Ft $0.63 0.63 1.05 1.41 2.13 4.00 4.55

Heavy-Duty Rubber Air Hose Assemblies Rubber multi-purpose air and water hose assembly. Industrial, construction, and agricultural applications. Hose is coupled using male x male NPT fittings. 4:1 safety factor.

Part No. 400414 400415 400416 400417 400418 400419 400420 400421

Description 1/4" x 50 ft, 300 PSI,1/4" NPT fittings 1/4" x 100 ft, 300 PSI,1/4" NPT fittings 3/8" x 50 ft, 300 PSI,1/4" NPT fittings 3/8" x 100 ft, 300 PSI,1/4" NPT fittings 1/2" x 50 ft, 300 PSI,1/2" NPT fittings 1/2" x 100 ft, 300 PSI,1/2" NPT fittings 3/4" x 50 ft, 250 PSI,3/4" NPT fittings 3/4" x 100 ft, 250 PSI,3/4" NPT fittings

Price /Each $42.35 79.90 47.44 75.58 68.58 126.75 86.10 158.95

10_pHyd_97-146.qxd

3/11/07

2:43 PM

Page 121

Industrial Hose

Push-On Style Low-Pressure Hose

Kuriyama Clear Vinyl Tubing (Hose)

PVC Bulk Air Hose Blue bulk multi-purpose PVC air and water hose. Industrial, construction, and agricultural applications. Rated at 300 PSI working pressure and nonconductive. Part No. 400400 400401 400402

Description 1/4" ID, 300 PSI, 750 Foot Reel 3/8" ID, 300 PSI, 750 Foot Reel 1/2" ID, 300 PSI, 750 Foot Reel

Price /Ft $0.36 0.43 0.55

PVC Air Hose Assemblies Lightweight PVC multi-purpose air and water hose assembly. Industrial, construction, agricultural hand sprayers, and mild chemical applications. Hose is coupled using male x male 1/4" NPT fittings and is rated at 300 PSI working pressure. Part No. 400410 400411 400412 400413

Description 1/4" x 50 ft, 300 PSI Hose Assemblies 1/4" x100 ft, 300 PSI Hose Assemblies 3/8" x 50 ft, 300 PSI Hose Assemblies 3/8" x 100 ft, 300 PSI Hose Assemblies

Price /Each $29.25 45.49 31.66 53.55

Jack Hammer Air Hose Assembly Ideal for the transfer of air, water, and mild chemicals. Specifically designed for the construction industry. Coupled with Chicago/Universal air couplings and band clamps. Part No. Description 400422 3/4" x 50 ft, 250 PSI, Universal Couplings

Price /Each $83.40

Note: Most popular Chicago/Universal Fittings are part numbered on page 10-135.

Gorilla Air Hose Premium quality multi-purpose hose used in a wide range of applications in factories, construction, agricultural, quarries, mines, railroads, the oil & gas industry, and shipbuilding. The tube is high oilresistant, the cover is super abrasion-resistant, and the hose is non-conductive. Rated at 500 PSI working pressure with a 4:1 safety factor.

Part No. 0491614 0491615 0491616 0491617 0491618 0491619 0491620

Description 3/8" Gorilla Air Hose 1/2" Gorilla Air Hose 3/4" Gorilla Air Hose 1" Gorilla Air Hose 1-1/4" Gorilla Air Hose 1-1/2" Gorilla Air Hose 2" Gorilla Air Hose

Price /Foot $2.73 3.77 4.95 7.45 11.92 13.71 14.31

Part No. 0431130 0431131 0431132 0431133 0431134 0431135 0431136 0431137 0431138 0431139 0431141 0431143 0431145 0431147

For use with air tools. Will handle air, water, oil, etc and is used with push-on style fittings at working pressure of up to 250 PSI.

Description 1/4" x 100 ft, 55 PSI 5/16" x 100 ft, 50 PSI 3/8" x 100 ft, 45 PSI 1/2" x 100 ft, 30 PSI 1/2" x 100 ft, 45 PSI 5/8" x 100 ft, 35 PSI 5/8" x 100 ft, 40 PSI 3/4" x 100 ft, 35 PSI 3/4" x 100 ft, 40 PSI 7/8" x 100 ft, 30 PSI 1" x 100 ft, 25 PSI 1-1/4" x 50 ft, 20 PSI 1-1/2" x 50 ft, 30 PSI 2" x 50 ft, 35 PSI

Price /Foot $0.16 0.22 0.22 0.27 0.59 0.62 0.70 0.87 1.36 1.09 1.09 1.30 2.45 4.28

Part No. 400487 400488 400489 0400000 0400001

Price /Ft $0.95 1.09 1.69 2.78 3.58

Description 1/4" ID, 250 PSI, Black 3/8" ID, 250 PSI, Black 1/2" ID, 250 PSI, Black 5/8" ID, 250 PSI, Black 3/4" ID, 250 PSI, Black

PVC Suction Hose Used for water suction and discharge service in construction and septic tank cleaning operations. For general and agricultural applications where mild chemical resistance is needed.

Part No. 400463 400464

Description 1-1/2" ID, Heavy Duty, Solid Green 2" ID, Heavy Duty, Solid Green

Price /Ft $1.78 2.61

400465 400466

3" ID, Heavy Duty, Solid Green 4" ID, Heavy Duty, Solid Green

4.72 7.70

Clear PVC Tubing (Hose)

Part No. 400426 400429 400430 400431 400432 400433 400434 400435

Vendor No. PVC1438-100 PVC3812-100 PVC38-100 PVC1258-100 PVC12-100 PVC58-100 PVC34-100 PVC1-100

I.D. O.D. Coil Lgth. 1/4" 3/8" 100' 3/8" 1/2" 100' 3/8" 9/16" 100' 1/2" 5/8" 100' 1/2" 3/4" 100' 5/8" 7/8" 100' 3/4" 1" 100' 1" 1-1/4" 100'

Price /Foot $0.21 0.29 0.47 0.39 0.72 0.85 0.95 1.25

PVC Suction Hose Assemblies

Part No. 400469 400470 400471 400472 400473

Description 2 x 20 ft. coupled MxF aluminum fittings 2 x 25 ft. coupled MxF aluminum fittings 3 x 20 ft. coupled MxF aluminum fittings 3 x 25 ft. coupled MxF aluminum fittings 4 x 20 ft. coupled MxF aluminum fittings

Price /Each $81.25 95.50 165.00 192.50 255.00

Fastenal branch personnel please Sold Request 1 = 1 assembly.

Clear PVC Nylon Reinforced Hose

PVC Discharge Hose

Versatile, lightweight, reinforced tubing that can be used for the food and beverage, general air, pharmaceutical, cosmetics, computer components, textile mills, and air-actuated equipment industries. Hose conforms to FDA, USDA, NSF61, and 3A standards.

Part No. 400436 400437 400438 400439 400440 0431125 0431126 0431127 0431128 0431129

Description 1/4" x 300 ft, 250 PSI 5/16" x 300 ft, 250 PSI 3/8" x 300 ft, 250 PSI 1/2" x 300 ft, 200 PSI 5/8" x 300 ft, 200 PSI 3/4" x 200 ft, 150 PSI 1" x 100 ft, 125 PSI 1-1/4" x 100 ft, 100 PSI 1-1/2" x 100 ft, 100 PSI 2" x 100 ft, 75 PSI

Price /Ft $0.38 0.72 0.61 0.86 1.19 1.42 2.02 2.98 3.68 5.47

Light duty water discharge hose for use in mining, construction, agricultural, and marine service applications. Part No. 400475 400476 400477 400478

Description 1-1/2" PVC Hose 2" PVC Hose 3" PVC Hose 4" PVC Hose

Price /Ft $0.67 1.24 1.30 1.92

Fastenal Branch Personnel: Please Sold Request number of feet (25, 100, and 300 feet).

10-121 The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Industrial Hose

INDUSTRIAL HOSE

10_pHyd_97-146.qxd

3/11/07

2:44 PM

Page 122

INDUSTRIAL HOSE Industrial Hose Cont.

Goodyear Nutriflo PVC Food Transfer Hose

Steam Hose

Industrial Hose

Clear PVC S&D hose that can handle almost every type of dry bulk food material or liquid in gravity flow and vacuum service. Conforms to USDA, FDA, 3A, and NSF 61.

Rugged construction used for all around steam service in chemical plants, refineries, shipyards, and demanding industrial service. Recommended for 250 PSI saturated steam service up to 406°F.

PVC Discharge Hose Assemblies

Price Part No. Description /Each 400479 1-1/2 x 25 ft. coupled MxF aluminum fittings $33.99 400480 2 x 25 ft. coupled MxF aluminum fittings 42.25 400481 3 x 25 ft. coupled MxF aluminum fittings 75.00 400482 4 x 25 ft. coupled MxF aluminum fittings 99.50

Fastenal branch personnel please Sold Request 1 = 1 assembly

Part No. 0491654 0491655 0491656 0491657 0491658

Description 1" Clear PVC Hose 1-1/4" Clear PVC Hose 1-1/2" Clear PVC Hose 2" Clear PVC Hose 3" Clear PVC Hose

Price /Foot $2.58 3.31 3.64 5.36 10.09

Industrial, construction, and agricultural water discharge applications where general service water hose is needed. Hose is coupled using male x female standard garden hose fittings. Price /Each $29.81 57.43

Multi-use hose assembly used to dispense gasoline, grease, kerosene, and petroleum oils from farm and barrel type pumps. Used for agricultural, construction, and industrial service where UL approval is not required. Coupled using 3/4" male x male NR-B1 onetime fittings.

Goodyear Virsiflo 125 Discharge Hose

Part No. 400461 400462

All rubber water discharge hose for medium duty water discharge service.

(1=1 assembly).

Part No. 0491650 0491651 0491652 0491653

Pressure Washer Hose Assemblies

Chemical Transfer Hose

Fastenal Branch Personnel: Please Sold Request

Lay flat Construction Part No. 0491630 0491631 0491632

Description 1-1/2" Versiflo 125 2" Versiflo 125 3" Versiflo 125

Price /Foot $3.31 3.73 5.36

Goodyear Spiraflex Aggie PVC Suction\Discharge Hose For use in general purpose water suction in industrial, agricultural, and construction applications.

Part No. 0491626 0491627 0491628 0491629

Description 1-1/2" PVC Suction Hose 2 “ PVC Suction Hose 3" PVC Suction Hose 4" PVC Suction Hose

Price /Foot $1.56 2.18 4.10 6.55

Rubber Suction\Discharge Hose General purpose water suction and discharge hose. For applications that see medium or heavy duty service found in construction or agricultural industries.

Part No. 0491621 0491622 0491623

Description 1-1/2" Rubber Water Suction Hose 2" Rubber Water Suction Hose 3" Rubber Water Suction Hose

Price /Foot $5.95 6.63 9.73

Stainless Steel and Aluminum Cam & Groove fittings are available on page 10-135. 10-122 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Used on pressure washer machines with working pressures up to 3000 PSI. Coupled using male rigid pipe x male swivel pipe fittings with black bend restrictors on each end. Part No. 400490 400491 400492

Description 1/4" x 50 ft, 3000 PSI, Black 3/8" x 50 ft, 3000 PSI, Black 1/2" x 50 ft, 3000 PSI, Black

Price /Each $125.47 143.81 177.93

Fastenal Branch Personnel: Please Sold Request (1=1 assembly).

Used for hot water applications (up to 200°F) in clean-up service, food processing plants, dairies, meat packing houses, bottling plants, breweries, canneries, and creameries. Cover is super abrasiveresistant and oil resistant, and incorporates Microban's anti-microbial built in protection.

Description 1/2" Fortress 300 with Microban 3/4" Fortress 300 with Microban

Description 3/4" x 12 ft. Coupled Gas Hose 3/4" x 14 ft. Coupled Gas Hose 1" x 12 ft. Coupled Gas Hose 1" x 14 ft. Coupled Gas Hose

Price /Each $23.17 26.15 35.11 40.42

Will handle the majority of today's industrial chemicals in pressure, gravity flow, or suction service. Contains a cross link polyethylene tube.

Part No. 0400002 0400003 0400004 0400006 0400007

Description 1/2" I.D. x .097" O.D., 150 PSI, Green 3/4" I.D. x 1.23" O.D., 150 PSI, Green 1" I.D. x 1.47" O.D., 150 PSI, Green 1-1/2" I.D. x 2.03" O.D., 150 PSI, Green 2" I.D. x 2.61" O.D., 150 PSI, Green

Price /Foot $10.78 12.65 12.87 14.93 16.05

Goodyear Plicord Flexwing

Food Washdown Hose

Part No. 0491635 0491636

Price /Foot $6.02 6.83 10.08 13.24 16.23 20.33

Description 1/2" Flexteel Steam Hose 3/4" Flexteel Steam Hose 1" Flexteel Steam Hose 1-1/4" Flexteel Steam Hose 1-1/2" Flexteel Steam Hose 2" Flexteel Steam Hose

Coupled Gas and Petroleum Hose (Lengths)

Contractor's Water Hose Assemblies

Description 3/4" x 25 ft, 150 PSI, Black 3/4" x 50 ft, 150 PSI, Black

Part No. 0491640 0491641 0491642 0491643 0491644 0491645

Price /Foot $3.60 4.87

For use in tank and in-plant operations to transfer gasoline, oil, and other petroleum based products that have up to 50% aromatic content. Designed for pressure gravity flow or full suction service.

Part No. 0491646 0491647 0491648 0491649

Description 1-1/2" Flexwing Petroleum Transfer 2" Flexwing Petroleum Transfer 3" Flexwing Petroleum Transfer 4" Flexwing Petroleum Transfer

Price /Foot $7.42 8.33 12.05 15.38

Goodyear Tapered End Washdown Hose (Lengths)

Steel Shot and Sand Blasting Hose

Used in water discharge applications found in paper mills and other industrial plants where flexibility and the need for a built-in integral rubber nozzle end are important.

Standard duty hose for steel shot or sand blasting in cleaning or finishing metal, stone, or other surfaces.

Part No. 0491662 0491663

Description 3/4" x 50 ft. Washdown Hose 1" x 50 ft. Washdown Hose

Price /Each $292.50 370.00

Part No. 0491659 0491660 0491661

Description 3/4" Blasting Hose 1" Blasting Hose 1-1/4" Blasting Hose

Price /Foot $5.23 6.28 7.54

10_pHyd_97-146.qxd

3/11/07

2:44 PM

Page 123

Hose Reels

Performance Hose Reels

Safety Series Hose Reels

These compact reels are designed to handle air, water, oil and grease applications where shorter lengths of hose are required. Available in pressure ratings of 300, 2500, 3000 and 5000 PSI. Features

• Steel construction with powder coat finish • Multi-position locking ratchet • Adjustable guide arm for various mounting positions • Adjustable solid rubber hose stop • Lubricated containerized spring motor • 2-Year manufacturer's limited warranty • Made in the USA

The EZ-Coil™ Rewind Safety System controls and eliminates the high-speed recoil associated with conventional spring driven reels. The slower, controlled rewind action of this reel greatly increases operator safety, as well as the safety of the people and property in the surrounding area.

300 3000 2500 5000

Features

• "CPC™ Powder Coat Blue Finish" powder coat paint • Eight-position locking ratchet secures reel at desired length • Super Hub dual axle support on Heavy Duty Models • 1/4" plate steel supports post and mounting plate • Full flow swivel joint • 8 position adjustable arm guide • Super Hub dual axle support system on Heavy Duty models • 1" oil-lite self-lubricating bearing • 2-Year manufacturer's limited warranty • Made in the USA Performance Safety Reels Operating Pressure (PSI) 300 2500 5000

Hose I.D. 3/8" 1/2" 1/4"

Part No. 0401448 0401451 0401453*†

Vendor No. EZ-P-LP-350 EZ-P-MP-425 EZ-P-HP-125

Hose Lgth. (ft) 50' 25' 25'

Part No. 0401457 0401459 0401462 0401464

Vendor No. EZ-SH-350 EZ-SH-450 EZ-MP-450 EZ-HP-150

Hose Lgth. (ft) 50' 50' 50' 50'

Hose I.D. 3/8" 1/2" 3/4"

Part No. 0401468 0401471 0401473

Vendor No. EZ-TSH-3100 EZ-TSH-4100 EZ-TSH-550

Hose Lgth. (ft) 100' 100' 50'

Vendor No. P-LP-125 P-LP-135 P-LP-150 P-LP-325 P-LPL-325 P-LP-350 P-LPL-350 P-LP-425

Hose Lgth. (ft) 25' 35' 50' 25' 25' Capacity 50' 25' Capacity 25'

Ship Wt. (lbs) 32 28 46 35 35 51 39 44

Price /ea $208.58: 185.68: 280.89: 213.05: 288.62: 260.24: 249.45: 220.56:

1/2" 3/8" 1/2" 1/4"

7059228 0401449 0401450*† 0401452*†

P-LP-450 P-MP-325 P-MP-425 P-HP-125

50' 25' 25' 25'

48 47 48 48

296.47: 332.74: 390.08: 395.10:

Super Hub Hose Reels These reels offer a larger chassis and a double supported axle for extra strength and stability. This design allows for longer lengths of hose making the reel suitable for air, water, oil, grease, gas, and other heavy fluids.

Ship Wt. (lbs) 51 48 48

Price /ea 351.59: 455.37: 460.38:

Ship Wt. (lbs) 60 67 69 68

Price /ea $387.53: 434.75: 554.18: 565.17:

Supreme Duty Safety Reels - Full Frame Operating Pressure (PSI) 300 300 250

Part No. 0401443 7059224 0401444 0401445 0401446** 0401447 0401454** 7059226

*† Grease/Hydraulic oil reels

Super Hub Safety Reels Hose I.D. 3/8" 1/2" 1/2" 1/4"

Hose I.D. 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2"

** Indicates models without hose

*† Grease/Hydraulic oil reels

Operating Pressure (PSI) 300 300 3000 5000

Operating Pressure (PSI) 300 300 300 300 300 300 300 300

Ship Wt. Price (lbs) /ea 97 $621.54: 102 638.64: 94 600.42:

Features

• High-quality steel construction • 1" solid steel axle with 1" precision bearings and Super Hub dual axle support system • Multi-position locking ratchet • Adjustable guide arm for various mounting positions • Durable "CPC™ Powder Coat Blue Finish" • 2-year manufacturer's limited warranty • Made in the USA

Operating Pressure (PSI) 300 300 300 300 300 3000 3000 5000 5000

Hose I.D. 3/8" 3/8" 3/8" 1/2" 1/2" 3/8" 1/2" 1/4" 3/8"

Part No. 0401455** 0401456 7059176 0401458 7059185** 0401460 0401461 0401463*† 0401465*†

Vendor No. SHL-N-350 SH-N-350 SH-N-3100 SH-N-450 SHL-N-450 MP-N-350 MP-N-450 HP-N-150 HP-N-350

Hose Lgth. (ft) 50' Capacity 50' 100' 50' 50' Capacity 50' 50' 50' 50'

Ship Wt. (lbs) 52 60 71 67 46 67 69 68 71

Price /ea $291.47: 332.56: 443.17: 364.16: 260.57: 489.24: 499.19: 509.14: 540.25:

** Indicates models without hose *† Grease/Hydraulic oil reels

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

10-123 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Industrial Hose & Products

SAFETY AND SPRING DRIVEN HOSE REELS

10_pHyd_97-146.qxd

3/11/07

2:44 PM

Page 124

HAND CRANK AND TRUCK MOUNT HOSE REELS Hose Reels Cont.

Stainless Steel Compact Hand Crank Hose Reel • Constructed of high quality electropolished stainless steel • Offers clean, non-corrosive performance in applications that require it, such as food and chemical processing marinas, and anywhere that rust, corrosion, and contamination thrive. • Stainless steel fluid paths are also available at special request

Compact Hand Crank Hose Reels Hose Reels This reel is a compact hose reel built to perform at working pressures up to 4,000 PSI. Features include: direct handcrank rewind design, handles temperatures from -20 ° F to 225 ° F, heavy-duty steel construction, CPC™ powder coat finish, adjustable hand brake and a 2-Year manufacturer's limited warranty. Hose not included. Made in the USA.

• Lightweight, compact, versatile reels that perform at working pressures up to 4,000 PSI • Save time and effort while increasing the safety of your work environment • The sturdy “U" shaped frame and all steel construction makes this one tough little reel Operating Pressure (PSI) 4000 PSI 4000 PSI 4000 PSI 4000 PSI 4000 PSI 4000 PSI 4000 PSI 4000 PSI

Hose I.D. 3/8" 3/8" 1/2" 3/8" 3/8" 3/8" 1/2" 3/4"

Part No. 0401478 7059188 0401479 7059189 7059190 7059191 7059238 7059193

Vendor No. 112-3-100 112-3-150 117-4-225 117-3-250 117-3-400 117-3-550 112-4-75 117-5-100

Hose Capacity 100' 150' 225' 250' 400' 550' 75' 100'

Ship Wt. Price (lbs) /ea 18.5 $155.67: 21 144.65: 33 186.78: 30 155.93: 33 161.06: 35 166.19: 21 153.88: 35 190.81:

Vendor No. 1/2"

Hose Capacity 75'

Hose not Included

Competitor Series Hand Crank Hose Reels

Part No. 0401481 7059263 7059140 7059141 0401480 7059143

Vendor No. 1125-4-450 1125-4-100 1125-5-100 1125-5-175 1125-4-200 1125-5-250

Operating Pressure (PSI) 4000 3000 PSI 3000 PSI 3000 PSI 4000 3000 PSI

Hose Capacity 100' 100' 100' 175' 200' 250'

Hose I.D. 1/2" 1/2" 3/4" 3/4" 1/2" 3/4"

Ship Wt. (lbs) 52 36 42 50 38 59

Price /ea $229.16: 199.02: 250.31: 257.49: 218.89: 262.62:

All Parts: Hose not Included

Vendor No. 3/8"

Hose Capacity 250'

Ship Wt. Price (lbs) /ea 30 $151.83:

Part No. 0401482 7059183

Vendor No. 1185-2024 1185-3328

Operating Pressure (PSI) 600 600

Hose Capacity 100' 250'

Hose I.D. 1-1/2" 1-1/2"

Hose not Included.

All Parts: Hose not Included

Compact Hand Carry/Crank Hose Reels

Supreme Duty Hose Reels

• Perfect for carrying the extra long lengths of hose to the job site • Lightweight, compact and versatile with working pressures up to 4,000 PSI • The hose control bar prevents the hose from slipping off the side discs and makes it easy to grab and go

T series Truck Mount • Toughest hose reels in the spring driven line • Extra large chassis is strongly supported by dual pedestal-style arms that span from the roller bracket down to the sturdy mounting base • Perfect for off-road applications that demand reliability in the most abusive environments

Operating Pressure (PSI) Hose I.D. Part No. 7058984 112-3-100-CM 4000 PSI 7058988 117-4-225-DM 4000 PSI

Ship Wt. Price (lbs) /ea 21 $511.91:

• Designed to handle long lengths of large diameter hose for increased volume delivery. • Exclusive low profile outlist riser and open drum design provide a non-crimping, flat smooth hose wrap • The sturdy one piece all welded “A" frame base provides exceptional strength to handle the extra weight without sacrificing performance, even in demanding mobile applications • Hose not included.

• Swivel on demand in the direction your work takes you and locks in eight different positions as desired • Lightweight, compact, and versatile with a working pressure up to 4,000 PSI • The “U" shaped base and hose control bar together add strength and rigidity while keeping the hose from slipping off the side discs

Part No. 4000 PSI

Part No. 4000 PSI

Large Capacity Hand Crank Hose Reels

Swivel Compact Hand Crank Hose Reel

Hose I.D. SM17-3-250

Hose I.D. 112-4-75-SS

This reel's features include: low profile riser, open drum slot for even hose wraps, solid steel crank handle, high-quality steel construction, CPC™ powder coat, one piece welded steel “A" frame construction, positive gear drive, and a 2year manufacturer's limited warranty. Hose not included. Made in the USA.

All Parts: Hose not included

Operating Pressure (PSI) 7059112

Operating Pressure (PSI) 7059035

Vendor No. 3/8" 1/2"

Hose Capacity 100' 225'

All Parts: Hose not Included

Ship Wt. Price (lbs) /ea 19 $154.91: 31 229.79: Part No. 0401466 0401467 7059136 ** 7059061 ** 0401474 0401475 7059053 ** 7059120*†

Vendor No. TSH-N-350 TSH-N-3100 TSHL-N-475 TSHL-N-4100 TMP-N-350 TMP-N-3100 TMPL-N-4100 TDMP-N-450

** Hose not Included *† Dual Hydraulic Hose

10-124 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Operating Pressure (PSI) 300 300 300 300 3000 3000 3000 2500

Hose I.D. 3/8" 3/8" 1/2" 1/2" 3/8" 3/8" 1/2" 1/2"

Hose Lgth. (ft) 50' 100' 75' Capacity 100' Capacity 50' 100' 100' Capacity 50'

Ship Wt. (lbs) 94 169

Price /ea $549.99: 579.61:

Ship Wt. Price (lbs) /ea 66 $394.74: 97 563.44: 71 407.27: 80 433.94: 72 547.53: 100 503.06: 80 463.69: 77 885.32:

10_pHyd_97-146.qxd

3/11/07

2:45 PM

Page 125

SPECIAL PURPOSE AND SPRING DRAWN HOSE REELS

Hose Reels

Hose Reels Cont.

Unitract Series Reels are ideally suited for plant maintenance or many other industrial functions where hose storage is a problem. Standard hose for air, water and oxygen/acetylene applications. Hose can be dispensed and retracted with greater ease and expedience than coiling by hand. The Unitract series fits easily into height restricted areas.

High Capacity Spring Driven Hose Reels • Built to handle large hose diameters • Used in applications demanding large volume delivery in low and medium pressures such as fuel and water • Sturdy box-style frame has heavy duty steel cross supports to all four corners for extra strength and rigidity

Part No. 7059241 7059257

Vendor No. SLPL-650** SLP-675

Operating Pressure (PSI) 300 300

Hose I.D. 1" 1"

Hose Lgth. (ft) ** 75'

Ship Wt. (lbs) 109 193

• Weighs 10 lbs. less than our standard reels. • Unitized multi-functional hub arbor requires fewer moving parts. • 8 Position guide arm. • Single set screw to access latch area and spring case. • Minimal size envelope permits installation where space is a factor. • Low pressure brass swivel reduces corrosion potential Price $597.05: 909.94:

** Hose not Included

Dual - Oxygen-Acetylene Hose Reels

Operating Pressure (PSI) 300 300 300

Hose I.D. 3/8 3/8 1/2

Part No. 0400213 0400217 0400220

Vendor No. UTL-325 UTL-350 UTL-550

Hose Lgth. (ft) 25 50 50

Ship Wt. (lbs) 40 41 45

Price $163.78 227.12 240.27

C-Series

• Ideal solution for managing bulky twin line welding hose • Compact in size and shares the reputation for long lasting performance • Has a large chassis and frame to accommodate longer lengths of welding hose

Part No. 7059161 7059123

Vendor No. SHW-N-150 SHW-N-1100

Operating Pressure (PSI) 300 300

Hose I.D. 1/4" 1/4"

Hose Lgth. (ft) 50' 100'

Ship Wt. (lbs) 64 84

Price $348.79: 483.18:

Dual Purpose Hose Reels

Part No. 7059015 7059016

Operating Pressure (PSI) 300 300

Hose I.D. 3/8" 3/8"

Hose Lgth. (ft) 2 x 35' 2 x 50'

Ship Wt (lbs) 69 78

Price $450.35: 490.36:

Enclosed Hose Reels • Protected by a powder coated steel casing that shields out the elements to protect and extend the life of the reel, the hose, and the components inside • It adds a neat, tidy, aesthetic appearance to work environments that demand a clean and professional look • The 3 piece casing is easy to assemble and disassemble for simple installation and maintenance

Part No. 7059218

Vendor No. EN-N-350

Operating Pressure (PSI) 300

Hose I.D. 3/8"

Hose Lgth (ft) 50'

The C Series reels are a larger more durable product, applied where longer, higher volume hoses are required in all pressure ranges up to 8000 psi. Applications include: plant maintenance, off road or food process. Operating Pressure (PSI) 300 300 300

• A combination of two hose reels in one compact assembly • Perfect for applications where two sources are needed to get the job done when space is a critical factor • Single mounting base creates stability and adds to the convenience of one mounting pattern

Vendor No. C-LP-335-335 C-LP-350-350

Available in Powder Coat or (304) Stainless

Ship Wt (lbs) 65

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price $350.84:

Hose I.D. 3/8 3/8 1/2

Part No. 0439421 0439422 0439425

Vendor No. LC-350 LC-370 LC-550

Hose Lgth. (ft) 50 70 50

Ship Wt. (lbs) 54 59 60

Price /Reel $298.79 362.37 356.45

General Industrial Spring Retractable Reels • New hybrid, lighter, spring-driven hose reel with a composite spool designed for applications that are less demanding, yet require a product that can withstand industrial use. • Easy to install and maintain, conveniently keeps hose organized for a more efficient, safer work area • Series RT • For use with Air and Water • Hose included

Part No. 7054332 7054333 7054334 7054336 7054339

Vendor No. RT435-OLP RT450-OLP RT635-OLP RT650-OLP RT850-OLP

Operating Pressure (PSI) 300 300 300 300 300

Hose I.D. 1/4 1/4 3/8 3/8 1/2

Hose Length 35' 50' 25' 50' 50'

Ship Wt. Price 22 $144.46: 25 174.88: 23 149.90: 29 210.73: 35 282.42:

10-125 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_97-146.qxd

3/11/07

2:46 PM

Page 126

HOSE REELS & INDUSTRIAL DUCTING Hose Reels Cont.

Heavy Duty Hand Crank Reels

Hose Reels

• Series 30000 • Hose not included • Vibration-proof, self-locking fasteners to ensure assembly integrity • Ideal for longer lengths of hoses

Premium Duty Spring Retractable Reels • Durable and compact for a wide range of applications with critical space requirements • A full flow shaft and swivel assures maximum product delivery • Series 4000, 5000, 5005 • For use with Air and Water • Hose included Part No. 7054403 7054402 7054354 7054455 7054355 7054362

Vendor No. 5450 OLP 4625 OLP 5635 OLP 5650 OLP A5825 OLP A5850 OLP

Operating Pressure (PSI) 300 300 300 300 300 300

Part No. 7054434 7054442 7054444

Operating Pressure (PSI) 300 300 300 300 300 250 4000

Hose Length 50' 25' 35' 50' 25' 50'

Hose I.D. 3/8 3/8 3/8 1/2 1/2 3/4 3/8

Hose Length 50' 70' 100' 50' 100' 50' 50'

Industrial Ducting

CWGP (2 Ply Fabric Duct With Wire Support) • Double-ply neoprene impregnated polyester fabric hose construction reinforced with a spring steel wire helix • Excellent crush resistance and tensile strength • Neoprene coating offers excellent abrasion and chemical resistance • Handles positive and negative pressure • Extremely flexible 25' duct • Listed as UL 94 V-O flame retardant • Temperature Range: -40°F to +250°F Size 2" 3" 4" 5" 6" 8" 10" 12"

Part No. 0470325 0470326 0470327 0470328 0470329 0470330 0470331 0470332

Hose I.D. 1/2 3/4 3/4

Hose Capacity 100' 100' 175'

Ship Wt. (lbs) 42 47 56

Price $204.21: 269.38: 281.33:

Stainless Steel Reels Hose I.D. 1/4 3/8 3/8 3/8 1/2 1/2

Ship Wt. Price 26 $248.74: 22 198.78: 25 236.79: 36 285.67: 29 256.34: 44 321.51:

Price /Each $157.80: 178.75: 202.77 231.56: 245.84 314.20: 390.14: 472.71:

10-126 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Ship Wt. (lbs) 47 50 92 51 101 88 60

• Corrosion Resistant • Ideal for food processing, pre-rinse, wash down, chemical transfer and industrial solvent handling • Also suitable for coastal, offshore and on-board ship in marine applications where the harsh environment of salt water spray requires the use of stainless steel hose reels • Hose and bumper stop not included Vendor Part No. No. 7054486 5600 OLS 7054469 7800 OLS

• Series 7000, 80000 •Ideal for the most demanding applications • Reel's base and guide arms are formed from highgrade steel and engineered with structural forms and gussets to yield the greatest amount of strength • Hose included

Vendor No. 7650 OLP 7670 OLP 81100 OLP 7850 OLP 82100 OLP 83050 OLP 7650 OHP

Operating Pressure (PSI) 1000 1000 1000

Hose not included

Heavy Duty Industrial Spring Retractable Reels

Part No. 7054404 7054405 7054413 7054406 7054414 7054384 7054368

Vendor No. CA32106 L CA33112 L CA33118 L

Operating Pressure Ship Wt. (PSI) Hose I.D. Hose Length (lbs) Air/Fluids Price 500 3/8 35' 23 series 5000$504.00: 500 1/2 50' 44 series 7000 740.79:

Tool Balancers

Use With Price air/water $358.45: air/water 379.90: air/water 559.40: air/water 371.49: air/water 576.77: air/water 553.97: grease 536.59:

• Makes tools nearly weightless, reducing operator fatigue • Reduces operator fatigue • Improves safety and ergonomics • Increases productivity, keeps tool positioned for immediate use with minimal operator motion • Reduces tool damage, prevent stools from being accidentally dropped Vendor No. TB 03 TB 05 TBL 10 TBL 15 TBL 23

Part No. 7050108 7054309 7054311 7054313 7054314

Load (lbs) 1.5-3 3-5 5-10 10-15 16-23

Description Constant Tension Constant Tension ratchet Lock ratchet Lock ratchet Lock

R-2 Blue & Clear (Plastic Ducting with Wire Support)

Clear Plastic Duct

• Medium weight blue or clear PVC wall hose construction reinforced with a spring steel wire helix • Good for positive pressure and light vacuum applications • Combines extreme flexibility and excellent compressibility with tight bending characteristics • Easy to clean, smooth inner surface assures minimal friction loss and efficient flow characteristics • Resists weathering, chemicals, and moisture • Good abrasion resistance • Blue is listed as UL 94 V-O flame retardant • Clear is manufactured FDA acceptable materials • Temperature Range: +20°F to +160°F

Size 2" 3" 4" 6" 8"

Blue Plastic Duct 25' Size 2" 3" 4" 6" 8"

Part No. 0470191 0470193 0470195 0470197 0470199

50' Price /Each $81.86: 113.60: 133.25: 149.86: 207.57:

Part No. 0470192 0470194 0470196 0470198 0470200

Price /Each $163.74: 227.32: 264.23: 299.93: 415.12:

Cable Length 6' 6' 8' 8' 8'

Ship Wt. (lbs) 1 1.2 10 10 10

25'

50' Price /Each $69.71 110.47: 129.73 147.44 206.24:

Part No. 0470336 0470337 0470338 0470339 0470340

Price /Each $52.14: 52.14: 242.23: 291.11: 319.34:

Part No. 0470201 0470202 0470203 0470204 0470205

Price /Each $148.79: 228.57: 266.66: 306.31: 424.80:

Commercial (Crush Proof Polyethylene Vacuum Hose) • Gray or black polyethylene copolymer wall hose construction reinforced with an integral polyethylene helix • Two-part construction • For industrial and commercial vacuum applications • Crush-resistant • Excellent flexing characteristics • Superior abrasion resistance • Smooth interior for efficient flow characteristics, minimum pressure drop, low friction loss, and clogging prevention • All sizes handle full vacuum • Size: 50 foot lengths • Temperature Range: -40°F to +140°F Gray Size 1-1/2" 2"

Part No. 0470352 0470353

Black Price /Each $94.35 162.42:

Part No. 0470354 0470355

Price /Each $98.80: 168.35

10_pHyd_97-146.qxd

3/11/07

2:46 PM

Page 127

INDUSTRIAL DUCTING

MG-V (PVC Vacuum Hose)

• PVC wall hose construction reinforced with a vinyl coated spring steel wire helix • Good chemical resistance • Light weight & flexible • Temperature rating: -10 to 160° F • Standard Length: 50 ft. Size 3/4" 1" 1 1/4" 1 1/2" 2"

Price /ea $72.60: 77.27: 102.33: 116.48: 162.37:

Part No. 0401524 0401525 0401526 0401527 0401528

MG-U (Urethane Vacuum Hose)

• Elastomer urethane wall hose construction reinforced with a vinyl coated spring steel wire helix • Light weight & flexible • Good chemical resistance • Temperature range: -60 to 160° F. • Standard length: 50 ft. Size 3/4" 1" 1 1/4" 1 1/2" 2"

Price /ea $89.65: 107.85: 137.27: 159.71: 192.43:

Part No. 0401529 0401530 0401531 0401532 0401533

• Medium weight thermoplastic rubber wall hose construction with a yellow external wearstrip reinforced with a spring steel wire helix • Designed for wide temperature ranges while maintaining flexibility • Good abrasion resistance • Suited for extreme moisture and broad chemical applications • Resistant to ozone, UV rays, weathering and chemicals • Highly visible yellow wearstrip offers external abrasion resistance • Combines extreme flexibility and excellent compressibility with tight bending characteristics • Easy to clean, smooth inner surface assures minimal friction loss and efficient flow characteristics • Temperature Range: -40°F to +275°F 25' Part No. 0470341 0470342 0470343 0470344 0470345 0470346 0470347 0470348 0470349

50' Price /Each $120.50 155.88 165.23 181.48 235.45 306.78: 366.72: 525.35: 596.70:

Part No. 0470254 0470255 0470256 0470257 0470258 0470259

Clear Polyurethane Duct

• Single-ply yellow polyester reinforced PVC vinyl fabric hose construction with an external wearstrip reinforced with a spring steel wire helix. • Lightweight 25' duct for blower applications. • Highly compressible. • Retractability allows for convenient storage and easy transport in a fraction of its fully extended length. • Low friction loss. • Wearstrip offers external abrasion resistance. • Listed as UL 94 V-O flame retardant. • Temperature Range: -20°F to +180°F

Size 3" 4" 5" 6" 8" 10" 12"

Size 8" 10" 12"

Price /Each $185.59 503.28: 442.25:

Part No. 0470333 0470334 0470335

Flx-Thane® LD (Abrasion Resistant Polyurethane Ducting)

T-7W (Thermoplastic General Purpose Ducting)

Size 3" 4" 5" 6" 8" 10" 12" 14" 16"

FSP-5 (Ventilation Ducting for Blowing Applications)

Price /Each $253.70: 325.36: 345.77: 378.14: 492.03: 635.80:

• Light weight black or clear polyurethane wall hose construction reinforced with a bronze coated spring steel wire helix • Excellent compressibility • Cut, gouge, and chemical resistant • Offers maximum combination of flexibility and abrasion resistance • Temperature range: -65 to 225 ° F • Standard Length of 25 ft. Clear Size 2" 3" 4" 5" 6" 8" 10" 12"

Price /ea $89.99: 136.13: 173.73: 208.73: 243.18: 296.44: 402.35: 481.81:

Part No. 0401495 0401496 0401497 0401498 0401499 0401500 0401501 0401502

Flx-Thane® MD (Abrasion Resistant Polyurethane Ducting) • Medium weight black or clear polyurethane wall hose construction reinforced with a bronze coated spring steel wire helix. • Excellent compressibility. • Offers maximum combination of flexibility and abrasion resistance. • Cut, gouge and chemical resistant. • Efficient flow characteristics. • Designed for wide temperature ranges. • Temperature Range: -65°F to +225°F Black Polyurethane Duct 25' Size 3" 4" 6" 8" 10"

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Part No. 0470206 0470208 0470212 0470214 0470216

50' Price /Each $223.10: 282.76: 334.69: 423.14: 586.48:

Part No. 0470207 0470209 0470213 0470215

Price /Each $445.98: 565.39: 669.28: 844.42:

25' Part No. 0470222 0470224 0470226 0470228 0470230 0470232 0470233

50' Price /Each $223.10: 282.76: 323.57: 334.69: 423.14: 586.48: 649.44:

Part No. 0470223 0470225 0470227 0470229 0470231

Price /Each $445.98: 565.39: 646.81: 669.28: 844.42:

Tiger Tail (Crush Proof Polyethylene Vacuum Hose) • Rugged yellow polyethylene wall hose construction reinforced with an integral polyethylene helix • Intended for liquid suction applications and ideally suited for the removal of fluids and waste materials • 50' hose handles a full vacuum. • Extremely flexible, even in sub-zero temperatures • Smooth interior for efficient flow characteristics, minimum pressure drop, low friction loss, and clogging prevention • Sleek exterior reduces drag for easy maneuverability • Superior abrasion and crush resistance • Resistant to kinking • Made with factory-installed polyweld cuffs • Temperature Range: -40°F to +140°F

Size 2" 3" 4"

Part No. 0470238 0470239 0470240

Price /Each $306.83: 450.47: 770.92:

GS (2 Ply Silicone Coated Fiberglass Fabric Duct) • Double-ply silicone coated woven fiberglass fabric hose construction with an external filament fiberglass cord reinforced with a spring steel wire helix • Designed for both high and low temperature extremes • Suited for air handling applications at low positive and low negative pressures • Narrow pitch allows for tight bending radius while maintaining a smooth air flow • Extremely lightweight and flexible • Non-kinking • Resistant to many oils/solvents, ozone, water, fungus, and alkalis • Not recommended for continuous flexing • 12' fabric duct • Temperature Range: -65°F to +550°F

Size 1" 1-1/2" 2" 2-1/2" 3" 4" 5" 6"

Part No. 0470241 0470242 0470243 0470244 0470245 0470246 0470247 0470248

Price /Each $110.52: 129.53: 136.93: 167.17: 175.32: 208.21: 247.44: 284.29:

10-127 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Industrial Hose

Industrial Ducting Cont.

10_pHyd_97-146.qxd

3/11/07

2:47 PM

Page 128

IND. DUCTING & PNEUMATIC QUICK DISCONNECTS Industrial Ducting Cont.

Pneumatic Quick Disconnects Cont.

Industrial Hose Accessories

Flarelock (Crush Proof Rubber Hose)

Pneumatic Quick Disconnects

• Lightweight rubber wall hose construction. • Ideal for carbon monoxide exhaust applications • Resistant to heat, aging, gasoline, oil, and fumes • No wire or metal; even when flattened 100%, the hose immediately returns to its original shape • Hose adapters and accessories available • 10' rubber hose • Temperature Ranges: 2": +375°F 2-1/2": +375°F 3"-5": +375°F Size 2" 2-1/2" 3" 4"

Part No. 0470249 0470250 0470251 0470252

Swing Couplings by Oetiker offer unrestricted full flow with safe, quick connection and disconnection under pressure

• Pneumatic Quick Disconnect Safety Coupler with Full Flow. • No pressure at Disconnection Part No. Series Product Price 1/4" Industrial Series: 0400426 B1 1/4" NPT Female Swing Coupling $23.38 0400428 B1 1/4" NPT Male Swing Coupling 22.00 Plugs (1/4"): 0400442 B1 1/4" NPT Male Coupling Plug 2.63 0400443 B1 1/4" NPT Female Coupling Plug 2.90 3/8" Industrial Series: 0400433 E 3/8" NPT Female Swing Coupling 24.08 0400435 E 3/8" NPT Male Swing Coupling 22.70 0400436 E 1/2" NPT Male Swing Coupling 22.70 0400434 E 1/2" NPT Female Swing Coupling 24.08 Plugs (3/8"): 0400449 E 3/8" NPT Male Coupling Plug 3.30 0400451 E 3/8" NPT Female Coupling Plug 3.58 0400450 E 1/2" NPT Male Coupling Plug 3.58 Coupling Covers 0400454 1/4" Black Swing Coupling 3.45 Cover for A1 and B1 Series 0400455 1/4" Orange Swing Coupling 1.38 Cover for A1 and B1 Series 0400456 3/8" Black Swing Coupling 3.45 Cover for D and E Series 0400457 3/8" Orange Swing Coupling 1.38 Cover for D and E Series

Price /Each $59.14: 67.08: 77.33: 117.00:

Sump Pump Hose Kits • Material: UV & crack resistant plastic • Ends: Molded for easy clamping • Length: 24 ft. Sump Pump Hose Kits Kit contains clamp and pipe adapter.

Size 1 1/4" 1 1/2"

Part No. 0401534 0401535

Price /ea $9.99: 12.65:

Pneumatic Quick Disconnects Female NPT Straight Body Industrial Interchange Profile Specifications for C9000 Safety Couplers Body Thread

Fluids: Compressed Air 1/4" 1/4" NPT Body Material: Nylon 6.6 1/4" 3/8" NPT Seal: Nitrile 3/8" 3/8 NPT Pressure Rating: up to 230 PSI 3/8" 1/2 NPT Temperature Range: -4°F to +140°F Thread Sizes: 1/4" to 1/2" Thread Types: NPT Industrial Applications: C9000 is used for any application (assembly, construction, air craft industry, automotive) where safety, durability, and performance are demanded.

Male NPT Straight Body Industrial Interchange Profile Body 1/4" 1/4" 3/8" 3/8"

Thread 1/4" NPT 3/8 NPT 3/8 NPT 1/2 NPT

Part No. 0443213 0443214 0443219 0443220

Vendor Price No. /Each 9405U06 14 $20.94 9405U06 18 20.93 9405U08 18 25.29 9405U08 22 25.29

Part No. 0443215 0443216 0443221 0443222

Vendor Price No. /Each 9415U06 14 $20.94 9415U06 18 20.94 9415U08 18 25.29 9415U08 22 25.29

Barbed Connector Body Industrial Interchange Profile Body 1/4" 1/4" 3/8" 3/8"

Hose I.D. 1/4 3/8 3/8 1/2

10-128 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 0443217 0443218 0443223 0443224

Vendor Price No. /Each 9421U06 06 $20.94 9421U06 10 20.93 9421U08 10 25.29 9421U08 13 31.31

1/4" Quick Disconnect

Universal

• Universal coupler that ends “coupler confusion" • Compatible with Industrial, ARO, or Tru-flate styles • Durable nickel plated brass exterior and stainless steel locking balls and springs

Pn: 0421900

Part No. 0421900 0421901 0421902 0421903 0421904 0421905 0421906 0421907 0421908

Pn: 0421903

Vendor No. 80191-04 80191-06 80191-08 80192-04 80192-06 80192-08 80193-04 80193-06 80193-08

Pn: 0421906

Hose End 1/4 Male NPT 3/8 Male NPT 1/2 Male NPT 1/4 Female NPT 3/8 Female NPT 1/2 Female NPT 1/4 Hose Barb 3/8 Hose Barb 1/2 Hose Barb

Price $7.38 7.38 7.95 7.80 7.80 8.45 7.80 7.80 8.45

10_pHyd_97-146.qxd

3/11/07

2:47 PM

Page 129

PNEUMATIC QUICK DISCONNECTS Industrial Hose Accessories

Pneumatic Quick Disconnects Cont.

Aro - 1/4 Basic Size

Lincoln - 1/4 Basic Size Plug

Female Thread Plug Size 1/8 NPT 1/4 NPT 3/8 NPT

Part No. 430000 430001 430002

Manual Coupler Automatic Coupler Safety Latch Price Price Price /Each Part No. /Each Part No. /Each 430200 $6.74 430101 5.10 430201 4.98 430301 8.29 430102 6.76 430202 6.44 430302 7.77

Price /Each $1.61 1.19 3.63

Plug Size 1/4 NPT

Part No. 430014

Price /Each $1.81

Manual Coupler Price Part No. /Each 430114 $7.13

Price /Each $1.73

Part No. 430115

Automatic Coupler Price Part No. /Each 430214 $9.13

1/4 Male Thread

Male Thread Plug Size 1/8 NPT 1/4 NPT 3/8 NPT

1/4 Female Thread

Part No.

Part No. 430003 430004 430005

Price /Each $1.74 1.03 2.66

Manual Coupler Price Part No. /Each 430103 $1.42 430104 5.31 430105 7.55

Automatic Coupler Price Part No. /Each 430203 $6.68 430204 6.43 430205 6.95

Plug Size 1/4 NPT

Part No. 430015

Manual Coupler Price /Each $8.31

Automatic Coupler Price /Each $8.50

Part No. 430215

Industrial - 1/4 Basic Size

Hose Stem Plug Size 1/4 I.D. 5/16 I.D. 3/8 I.D.

Part No. 430006 430007 430008

Price /Each $2.68 3.75 2.70

Manual Coupler Price Part No. /Each 430106 $6.81 430108

7.13

Automatic Coupler Price Part No. /Each 430206 $7.71 430207 6.73 430208 7.77

Barb-Tite Plug Price Part No. /Each 430406 $2.31

Female Thread Plug

430408

2.90 Size 1/8 NPT 1/4" NPT 3/8 NPT

Aro - 3/8 Basic Size

Part No. 430016 430017 430018

Manual Coupler Price /Each $9.21 4.05 5.38

Part No. 430216 430217 430218

Manual Coupler Price /Each $7.68 4.25 4.72

Part No. 430219 430220 430221

Price /Each $1.52 0.95 1.99

Part No. 430116 430117 430118

Price /Each $1.40 0.90 1.98

Part No. 430119 430120 430121

Automatic Coupler Price /Each $7.58 6.11 7.94

Male Thread Plug

Female Thread Plug Size 3/8 NPT

Manual Coupler Price /Each $3.60

Part No. 430010

Part No. 430110

Price /Each $12.06

Male Thread Plug Size 3/8 NPT

Part No. 430013

Manual Coupler Price /Each $3.60

Part No. 430113

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price /Each $13.93

Size 1/8 NPT 1/4" NPT 3/8 NPT

Part No. 430019 430020 430021

Automatic Coupler Price /Each $6.76 6.28 7.60

Hose Stem Plug

Manual Coupler Automatic Coupler Barb-Tite Plug

Barb-Tite Coupler Price Price Price Price Price Size Part No. /Each Part No. /Each Part No. /Each Part No. /Each Part No. /Each 1/4" I.D. 430022 $2.14 430122 $5.20 430222 $7.94 430422 $2.95 430522 $6.76 5/16 I.D. 430023 2.62 430223 8.22 3/8" I.D. 430024 2.08 430124 6.14 430224 7.94 430424 2.34 430524 6.50

10-129 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_97-146.qxd

3/11/07

2:47 PM

Page 130

PNEUMATIC QUICK DISCONNECTS Industrial Hose Accessories

Pneumatic Quick Disconnects Cont.

Tru-Flate - 1/4 Basic Size

Industrial - 3/8 Basic Size

Female Thread Plug Size 1/4 NPT 3/8 NPT

Manual Coupler Price /Each $0.86 2.10

Part No. 430045 430046

Price /Each $4.24 5.90

Part No. 430145 430146

Male Thread Female Thread

Plug Plug

Size 1/4 NPT 3/8 NPT 1/2 NPT

Manual Coupler Price Part No. /Each 430125 $9.76 430126 8.84 430127 12.59

Price /Each $2.74 2.18 2.78

Part No. 430025 430026 430027

Automatic Coupler Price Part No. /Each 430225 $11.77 430226 14.70 430227 15.72

Male Thread Plug Size 1/4 NPT 3/8 NPT 1/2 NPT

Manual Coupler Price Part No. /Each 430128 $11.33 430129 9.17 430130 13.93

Price /Each $2.10 1.98 4.49

Part No. 430028 430029 430030

Automatic Coupler Price Part No. /Each 430228 $14.41 430229 14.56

Size 1/4 NPT 3/8 NPT

Manual Coupler Price /Each $0.88 2.36

Part No. 430048 430049

Price /Each $4.29 5.74

Part No. 430148 430149

Hose Stem Plug Size 1/4 I.D. 3/8 I.D.

Part No. 430050 430052

Price /Each $2.60 2.33

Manual Coupler Price Part No. /Each 430150 $6.23 430152 6.70

Barb-Tite Plug Price Part No. /Each 430450 $1.83 430452 2.42

Barb-Tite Coupler Price Part No. /Each 430550 $6.43 430552 6.70

Tru-Flate - 3/8 Basic Size

Hose Stem Plug

Size 1/4 hose I.D. 3/8 Hose I.D. 1/2 Hose I.D.

Part No. 430031 430032 430033

Manual Coupler Price /Each $4.19 3.38 3.97

Part No. 430132 430133

Price /Each 9.91 12.32

Barb-Tite Plug

Part No. 430431 430432

Price /Each $4.77 13.50

Barb-Tite Coupler Price Part No. /Each 430531 $13.66 430532 12.32

Female Thread Plug Size 1/4 NPT 3/8 NPT 1/2 NPT

Part No. 430053 430054 430055

Industrial - 1/2 Basic Size

Male Thread

Female Thread

Size 1/4 NPT 3/8 NPT 1/2 NPT

Manual Coupler Price /Each $1.94 1.99 3.67

Part No. 430153 430154 430155

Price /Each $1.94 1.99 3.67

Part No. 430156 430157 430158

Plug

Plug Size 3/8 NPT 1/2 NPT

Manual Coupler Price /Each $3.72 3.22

Part No. 430034 430035

Part No. 430134 430135

Price /Each $14.46 13.46

Male Thread Plug Size 3/8 NPT 1/2 NPT

Manual Coupler Price /Each $3.33 3.17

Part No. 430038 430039

Part No. 430138 430139

Price /Each $12.32 11.91

Part No. 430056 430057 430058

Price /Each $8.84 7.40 13.47

Manual Coupler Price /Each $7.35 6.98 12.59

Hose Stem Plug

Manual Coupler

Size 1/4 Hose I.D.

Part No. 430059

Price /Each $3.35

3/8 Hose I.D. 1/2 Hose I.D.

430060

2.73

Part No. 430159

Price /Each $10.98

430160 430161

10.98 12.32

Barb-Tite Plug

Part No. 430459

Price /Each $3.33

430460

3.33

Barb-Tite Coupler Price Part No. /Each 430559 $13.39 430560

9.65

Tru-Flate - 1/2 Basic Size

Hose Stem Plug Size 3/8 Hose I.D. 1/2 Hose I.D.

Part No. 430041

Manual Coupler Price /Each $3.78

Part No.

Price /Each

430142

13.39

Female Thread Plug

Bulk Air hose is available on page 10-121. Find a wide selection of hose clamps on page 10-138.

Size 3/8 NPT 1/2 NPT

HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 430062 430063

Part No. 430162 430163

Price /Each $12.59 10.61

Male Thread Plug Size 3/8 NPT 1/2 NPT

Manual Coupler Price /Each $3.49 3.17

Part No. 430066 430067

Part No. 430166 430139

Price /Each $12.59 11.91

Hose Stem Plug Size 1/2 Hose I.D.

10-130

Manual Coupler Price /Each $2.88 3.91

Part No. 430070

Manual Coupler Price /Each $4.88

Part No. 430170

Price /Each $13.39

10_pHyd_97-146.qxd

3/11/07

2:47 PM

Page 131

Pneumatic Quick Disconnects Cont. Accessories

Part No. 0400225

Universal - 1/4 Basic Size

0430567 0430568

1/4 Female NPSM

0430570

Automatic Coupler Price /Each $8.15

Part No. 430272

OSHA Style Blow Gun

1/4 Male

0430569 430095 430083 430096

Automatic Coupler Price /Each $9.77

Part No. 430273

430082 0400223

Recoil Hose Assembly

1/4 Hi-Flo™ Couplers and Plugs For Maximum Flow

0430571 430086 430087

Rubber Tipped Blow Gun

430084 430085 0430573

Vendor No. 905D

Price Description /Each 10 to 50psi Pencil Type Pocket 6.14 Pressure Gauge 903D 10-150 PSI Tire Gauge 26.78 908D 20 to 120psi,Pocket Pressure 8.42 Gauge with Dual Foot Chuck 180 12-120PSI Inflator Gauge, 42.27 Sight Glass, 12" Hose 104 1/4" NPT Female- Ball Foot Chuck $3.49 104ZN 1/4" NPT Female Zinc Ball 2.62 Foot Chuck for Live Air Lines 101 Air Inflator with Gauge 50.62 0659 00 14 Standard Polymer Blowgun 21.44 204-30 OSHA Style Blow Gun 10.25 201 rubber tipped 14.82 blow gun 202 Rubber Replacement Tip for 201 blow gun 3.66 4-25 Recoil Hose Assembly 16.80 1/4"- 25' Nylon 11 4-50 Recoil Hose Assembly 29.41 1/4"- 50' Nylon 11 3404 3-1 Manifold,1/4 in,1/4 ports 10.40 3406 3-1 Manifold,3/8 in,1/4 ports 10.79 700 1/8 NPT Tank Valve w\Schroeder 1.94 valve

1/4 Female NPT Plug Part No. 0430565

Brass Coupler Price Part No. /Each 0430562 $5.90

Price /Each $1.08

Steel Coupler Price Part No. /Each 0430564 $6.74

1/4 Male NPT Plug Part No. 0430566

Brass Coupler Price Part No. /Each 0430563 $6.58

Price /Each $1.16

Professional Tire Pressure Gauges • Easy to Read • Portable • ANSI Grade B Accuracy • Shock Resistant with Release Button

Part No. 0267366 0267367

Vendor No. AG010039 AG010041

Pressure 160 lbs/in 200 lbs/in

Price $14.68 21.10

Handy Tire Pressure Gauge • 2 in Dial • Pressure Range 0-60 PSI • Angled Stem • Release button on chuck Part No. 0267835

Vendor No. AG10042

Pressure 0-60 psi

Price $10.12

Professional Tire Pressure Gauge • Easy to Read • 2" dial • Release button on chuck Part No. 0267836

Vendor No. AG10042A

Pressure 0-60 psi

Price $10.86

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

10-131 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Industrial Hose Accessories

SHO AND TIRE ACCESSORIES & PNEUMATIC QUICK DISCONNECTS

10_pHyd_97-146.qxd

3/11/07

2:48 PM

Page 132

SAFETY AIR GUNS Pneumatic Quick Disconnects Cont. Replacement Nozzles

BLO-Hard® Safety Air Gun

Industrial Hose Accessories

• Lightest Extended Reach Airgun • Constructed of rugged die cast aluminum • The perfect tool for cleaning hard to reach areas • Meets OSHA standards

®

Long John Safety Air Guns • Venturi nozzle delivers high power for industrial cleaning applications • Delivers 100% more thrust than conventional air guns • Extensions allow access to hard to reach areas • Ergonomic pistol grip and trigger reduce hand fatigue • Durable cast aluminum body features a built-in hanger for easy storage • Meets OSHA standards

Vendor Part No. No. 0423807 75LJNA-1 0423808 75LJNS

Description Use With Alumn. Nozzle 75LJ & U75LJ Steel Nozzle 75LJ & U75LJ

Price /Ea $4.73 11.99

Part No. 0423825 0423826 0423827

Vendor No. 900 900LJ012AA 900LJ024AA

Extension Lgth. -12" 24"

Price /Ea $12.65 24.64 25.74

Part No. 0423815 0423816 0423817 0423818 0423819

Vendor No. 75XXT 75XT012AA 75XT024AA 75XT036AA 75XT048AA

Extension Lgth. -12" 24" 36" 48"

Price /Ea $26.29 33.00 35.31 37.62 39.93

Xtra Thrust Safety Air Gun Part No. 0423800 0423801 0423802 0423803 0423804 0423805 0423806

Vendor No. 75LJ012AA 75LJ018AA 75LJ024AA 75LJ036AA 75LJ048AA 75LJ060AA 75LJ072AA

Extension Lgth. 12" 18" 24" 36" 48" 60" 72"

Price /Ea $28.60 29.81 31.25 33.22 35.53 37.84 40.26

• Most Powerful Safety Airgun • Delivers 250% more thrust than conventional air guns • Venturi nozzle delivers maximum power for industrial cleaning applications • Extensions allow access to hard to reach areas • Meets OSHA Standards

Cross-Reference for Quick Disconnect Fittings Fastenal

Tomco

Amflo

Aro

Camel

Coilhouse

Foster

Hansen

NAPA

Milton

Parker

Schrader

Tru-Flate

Lincoln

Dixon

Industrial Interchange-Manual Sleeve Type Couplings

430120 430121 430117 430118 430122 430124 430125 430126 430129 430132 430135 430139

A181 A182 A184 A185 A186 A187 PT400 PT420 PT430 PT480 T250 T530

C21 C21-03 C20 C20-23 C20-42 C20-44 C26-22 C26 C25 C26-44 C10 C9

23102-212 23102-213 23102-200 23102-3 23102-22 23102-24 23103-300 MSCF33-000 23103-313 MSCH33-000 23104-400 23104-14

61-578 61-535 61-573 0 61-575 0 0 61-482 61-483 0 61-563 61-564

152 155 150 151 153 156 582 580 581 586 120 122

3103 3303 3003 3203 3603 3703 4004 4204 4304 4804 5205 5305

1100 1300 1000 1200 1600 1700 400 420 430 4006 520 530

90-672 90-657 90-670 90-667 90-671 0 90-629 90-680 90-682 90-635 90-662 90-664

716 719 715 718 717 717-6 1833 1835 1836 1836-6 1815 1816

B22 B22E B23 B23E B20-3B B20-5B 25C 25 24 24-6B 17 16

5139/5141-12 51140-12 5138/5142-12 5263-12 B203B B205B 25C 3541 24 245B 3512 3511

13-224/225 13-226 13-235/236 13-236 13-264 0 0 15-536/537 13-526/527 0 13-712/713 13-704

0 0 632004 0 0 0 0 642006 0 0 0 0

DCB21 DCB2103 DCB20 DCB2023 DCB2042 DCB2044 DC8 DC6 DC5 DC644 DC10 DC9

23903-210 23903-310 23903-300 23903-420 23904-426 23904-310 23904-410 23904-400 23904-520 23902-210 23902-200 23902-3 23902-420

0 61-484 61-485 0 0 61-133 62-134 61-137 0 61-578 61-579 61-535 0

5803 5801 5802 5806 5808 1203 1201 1202 1208 1501 1502 1503 1508

40-4 42-4 43-4 48-4 49-4 52-5 54-5 55-5 60-5 .103 .11-3 14-3 17-3

40 42 43 406 408 52 54 55 50 10 11 12 17

90-605 90-683 90-681 90-651 0 90-575 90-578 90-588 0 90-674 90-676 90-677 0

1839 1837 1838 1837-6 0 1859 1857 1858 0 727 728 733 736-6

HOE H2E H3E H5E H6E HOF H2F H3F H5F H2C H3C H2C-E H9C

HOE 3542 3548 HO5E HO6E HOF H2F H3F H5F H2C 5139-11 5263-11 H9C

0 12-526/527 12-536/537 0 0 0 12-752 12-672 0 12-224/225 12-234/235 12-226 12-266

64104 64106 54026 0 0 0 650108 650208 0 630104 630204 0 0

DCP25 DCP25 DCP26 DCP2544 DCP2545 DCP1703 DCP17 DCP18 DCP1745 DCP21 DCP20 DCP2103 DCP2144

210 210-212 210-022 2608 2609 3946

61-526 61-527 0 61-528 61-529 0

140 142 1406 1401 1402 1406

210-3003 210-3103 210-16 210-10 210-11 210-16

20AS25F 20AS25M 20AS25H 20AP25M 20AP25F 20AP25H

90-644 90-695 0 90-618 90-620 0

775 776 776-4 777 778 777-4

B53 B52 A8C A2C A3C A8C

3526 3525 A8C 3529 3530 0

13-334/335 13-324/325 0 12-324/325 12-334/335 0

862 0 0 13329 13331 0

DC38 DC37 DC3842 DCP37 P38 DCP3742

TFPM33 TFPF33 TFCF33 TFCM33 TFPM22 TFPF22 TFCN22 TFCF22 TFCH22-000 TFCH23-000

61-558 61-559 61-553 61-554 61-538 61-539 61-254 61-523 0 0

5901 5902 590 591 1601 1602 162 160 163 166

TF42 TF41 TF4204 TF4304 TF10 TF11 TF3103 TF3003 TF3603 TF3703

31AP25M 31AP25F 31ASA37F 31AS37M 21AP25M 21AP37M 21AS25M 21AS25F 21AS25H 21AS37H

90-658 90-660 90-654 90-656 90-624 90-626 90-610 90-600 90-607 90-611

1807 1808 1805 1806 783 784 786 785 786-4 786-6

2E 1E B15 B14 2C 3C B12 B13 B103B B105B

3517 3518 3516 3515 3506 3507 3503 3504 0 0

12-604/605 12-612 13-612 13-604 12-124/125 12-134/135 13-124/125 13-134/135 13-164 0

5875 5876 5874 0 5872 5873 5870 5871 0 0

DCP5 DCP6 DC6 DC5 DCP1 DCP2 DC1 DC2 DC242 DC244

61-548 61-486 61-550 61-551

170 172 1701 1702

LN3003 LN3103 LN310 LN11

0 0 0 0

90-644 90-645 90-648 90-650

790 794 791 792

B73 B72 L2C L3C

3528 3527 3531 3532

13-434/435 13-424/425 12-424/425 12-434/435

815 0 11659 11661

DC28 DC27 DCP27 DCP28

Industrial-Interchange Plugs

430028 430029 430026 430032 430033 430038 430039 430035 430042 430020 430017 430021 430024

T40 T42 T43 T48 T49 T52 T54 T55 T60 1804 1805 1806 1826

CP25-02 CP25 CP26 CP25-44 CP25-45 CP17-03 CP17 CP18 CP17-45 CP21 CP20 CP21-03 CP21-44

ARO 210 Type Couplers/Plugs

430101 430104 430106 430004 430001 430006

100 101 104 200 300 400

C38 C37 C38-42 CP37 CP38 CP37-42

Truflate Sleeve Type Couplers

430057 430054 430154 430157 430048 430045 430148 430145 430150 430152

PT42 PT43 PT420 PT430 2154 2155 A2181 A2184 A2186 A2188

CP5 CP6 C6 C5 CP1 CP2 C1 C2 C2-42 C2-44

Lincoln Type Couplers and Plugs

430114 430115 430015 430014

1100 1101 1109 1110

C28 C27 CP27 CP28

LNCF22 LNVM20 LNPM22 LPNF22

The above interchange chart is a cross reference of the most popular part numbers in current use. 10-132 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_97-146.qxd

3/11/07

2:48 PM

Page 133

HYDRAULIC (DOUBLE SHUT-OFF) QUICK COUPLERS Vinyl Dust Cap

A5600 Series Heavy Duty Plug

Dust caps and plugs prevent contamination of disconnected fluid systems. They prevent the introduction of dirt, grit, and other contaminants into system through the Series HK component.

Tomco A5600 and Hansen HA 15000 series components are fully interchangeable.

Industrial Hose Accessories

Hydraulic (Double Shut-Off) Quick Couplers

Hydraulic (Double Shut-Off) Quick Couplers - HK Series HK quick-couplers have fast-acting poppet valves in both the plug and coupler to effectively prevent fluid loss on disconnect. Industry terminology for the HK series is “hydraulic couplings." However, they also have wide application on vacuum systems, steam liquid, gases and other installations where fluid loss during connection or disconnection is undesirable.

Industrial Interchange ISO “B" Interchanges with:Parker 60 Series or Tomco THK Temperature: -40°F to +225°F Standard Seals: Nitrile

Size 1/8" 1/4" 3/8" 1/2" 3/4" 1"

Part No. 0482636 0482637 0482638 0482639 0482640 0482641

Dust Cap PPDC1HK PPDC2HK PPDC3HK PPDC4HK PPDC6HK PPDC8HK

Price /Each $5.36 4.68 6.19 7.71 8.75 12.51

Price No. PA5604-26HD PA5606-31HD PA5608-36HD

/Each $12.80 23.17 28.57

HA 15000 Series Coupler Vendor No. 1K11 2K16 3K21 4KP26 6KP31 8KP36

Price /Each $4.89 6.26 9.07 11.47 16.52 21.81

B1K11 B2K16 B3K21 B4KP26 B6KP31 B8KP36

5.10 6.89 9.14 13.64 46.90 26.82

B1K11 LL2K16 LL3K21 LL4KP26 LL6KP31 LL8KP36

14.63 14.80 24.93 34.77 60.40 95.69

HK Series Manual Coupler Steel Part No. 1/8" 0482606 1/4" 0482607 3/8" 0482608 1/2" 0482609 3/4" * 0482610 1" 0482611 Brass 1/8" 0482618 1/4" 0482619 3/8" 0482620 1/2" 0482621 3/4" * 0482622 1" 0482623 Stainless Steel (303) 1/8" 0482630 1/4" * 0482631 3/8" * 0482632 1/2" * 0482633 3/4" * 0482634 1" 0482635

Vendor Part No. 0482647 0482648 0482649

Vinyl Dust Plug

HK Series Plug Steel Part No. 1/8" 0482600 1/4" 0482601 3/8" 0482602 1/2" 0482603 3/4" * 0482604 1" 0482605 Brass 1/8" 0482612 1/4" 0482613 3/8" 0482614 1/2" 0482615 3/4" * 0482616 1" 0482617 Stainless Steel (303) 1/8" 0482624 1/4"* 0482625 3/8"* 0482626 1/2"* 0482627 3/4" * 0482628 1" 0482629

Hose I.D. 1/2" 3/4" 1"

Vendor No. 1H11 2H16 3H21 4HP26 6HP31 8HP36

Price /Each $12.97 12.88 19.36 25.14 38.37 50.45

B1H11 B2H16 B3H21 B4HP26 B6HP31 B8HP36

11.28 14.27 20.25 31.46 54.98 72.98

LL1H11 LL2H16 LL3H21 LL4HP26 LL6HP31 LL8HP36

37.96 38.50 49.72 92.88 148.29 229.05

*Available with British parallel pipe thread by special order.

0482725 Size 1/8" 1/4" 3/8" 1/2" 3/4" 1"

Part No. 0482725 0482726 0482727 0482728 0482729 0482730

Dust Plug PSDC1HK PSDC2HK PSDC3HK PSDC4HK PSDC6HK PSDC8HK

Price /Each $6.14 4.66 6.14 6.31 9.97 11.58

0482650 Size 1/4" 3/8" 1/2" 3/4" 1"

Part No. 0482650 0482651 0482652 0482653 0482654

Vendor No. HA1521100 HA1522100 HA1532100 HA1542100 HA1552100

Price /Each $12.18 21.49 21.27 35.60 49.00

Hydraulic (Double Shut-Off) Quick Couplers -HA 15000 and A5600 Series HA 15000 quick connects bring the user an unusual combination of advantageous features including: high flow rate, low pressure drop, interchangeability with leading “general purpose" couplers and superior trouble-free performance. Meets, or exceeds, ISO 7241-1 Series “A" specifications.

General Purpose ISO “A" Interchanges with: Acroquip 5600; Parker 6600 Series Temperature: -40°F to +225°F Note: Heavy duty plugs are manufactured from high-strength steel and induction hardened. They are ideal for high cycling applications.

HA15000 Series Standard Plug Hose I.D. 1/4" 3/8" 1/2" 3/4" 1"

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Part No. 0482642 0482643 0482644 0482645 0482646

Vendor No. HA1521200 HA1522200 HA1523200 HA1524200 HA1525200

Price /Each $4.85 9.58 9.78 19.24 22.32

10-133 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_97-146.qxd

3/11/07

2:49 PM

Page 134

HYDRAULIC (DOUBLE SHUT-OFF) QUICK COUPLERS Hydraulic (Double Shut-Off) Quick Couplers Cont. Couple Under Pressure - Series A5100

Pressure Ratings

Industrial Hose Accessories

TOMCO Series A5100 quick-couplers are engineered to provide the extra assembly forces required to make or break connection against trapped or active hydraulic pressures up to 500 psi. Working Range: Maximum Operating Pressure; See Pressure Chart Temperature: -40°F to +225°F Standard Seals: Bonded Nitrile

Hose I.D. 3/4" 1" 1-1/4"

Working Pressure (PSI) 3,000 3,000 2,750

Burst Strength (PSI) 9,000 9,000 8,250

Disconnected burst strength of plugs 51P-20 and 51PF-20 is 7,500 psi.

Plug Without Flange

Hose I.D. 3/4" 1" 1-1/4"

Coupler with"Wings"

Plug Without Flange Vendor Price Part No. No. /Each 0482655 51P-12 $39.11 0482656 51P-16 39.11 0482657 51P-20 96.88

Part No. 0482658 0482659 0482660

Plug With Flange Vendor No. 51PF-12 51PF-16 51PF-20

Price /Each $44.87 42.26 103.24

Coupler With “Wings" Vendor Part No. No. 0482661 51W-12 0482662 51W-16 0482663 51W-20

Price /Each $51.29 53.60 100.20

Coupler With Hex Nut Vendor Part No. No. 0482665 0482666

51H-16 51H-20

Price /Each 57.30 118.64

Suitable for coupling and uncoupling at pressures up to 500 psi

Flo-Temp Quick Couplers and Plugs • Non-valved straight-through models for maximum flow • Sockets with straight, 90° and 45° hose stems and without hose stem • Brass plugs with male pipe thread to recessed mounting to avoid damage to plugs when molds are being changed or stored • Brass socket construction • Stainless steel springs and locking balls • Viton seals (-30°F to +450) • Brass and zinc-plated steel plugs Flo-Temp couplings provide the flow needed to cool or heat injection molds and die casting dies. Sockets are available nonvalved for maximum flow. Flo-Temp couplings can be used with water-glycol, hot water and hot oil. Body sizes are 1/4". 3/8" and 1/2". Note: Valved bodies are also available. Ask your local Fastenal representative.

1/4" Straight Through (Non-Valved) Flo-Temp Coupler Fits Hose 1/4" 1/4" (Push-On)

Body Only (Brass) Vendor Part No. No. 0482667 LNFT200

Price /Each $6.86

3/8 3/8" (Push On)

Straight Stem (Brass) Vendor Part No. No. 0482668 FTS204 0482669 FTS204HP 0482671 0482672

FTS206 FTS206HP

Price /Each $5.12 5.19

Part No. 0482673 0482674

5.45 5.90

0482676 0482677

90° Stem (Brass) Vendor No. FTS214 FTS5214HP

45° Stem (Brass) Vendor No. FTS224 FTS224HP

Price /Each $7.21 8.40

Part No. 0482678 0482679

Price /Each $7.87 8.24

FTS216 FTS216

6.24 8.52

0482681 0482682

FTS226 FTS226HP

7.02 10.29

90° Stem (Brass) Vendor No. FTS316 FTS316HP FTS318 FTS318HP MC318HF

Price /Each $10.25 10.97 10.06 10.32 8.25

Part No. 0482695 0482696 0482697 0482698

45° Stem (Brass) Vendor No. FTS326 FTS326HP FTS328 FTS328HP

Price /Each $10.97 11.69 10.97 10.97

3/8" Straight Through (Non-Valved) Flo-Temp Coupler

Fits Hose 3/8" 3/8"(Push-On) 1/2" 1/2 (Push-On) 1/2" (High Flow)

Part No. 0482683

0482684

Body Only (Brass) Vendor No. LNFT600

MC300HF*

Price /Each $7.69

5.72

Straight Stem (Brass) Vendor Price No. /Each FTS306 $6.78 FTS306HP 7.37 FTS308 6.86 FTS308HP 7.56 MC308HF 7.28

Part No. 0482685 0482686 0482687 0482688 0482689

Part No. 0482690 0482691 0482692 0482693 0482694

1/2" Straight Through (Non-Valved) Couplers

Fits Hose 1/2" 1/2"(Push-On) 3/4"

Body Only (Brass) Price Part No. /Each 0482700 $15.15

10-134 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Straight Stem (Brass) Part No. 0482701 0482702 0482703

90° Stem (Brass) Price /Each $16.48 18.13 16.78

Part No. 0482704 0482705 0482706

Price /Each $19.71 20.32 20.37

45° Stem (Brass) Part No. 0482707

Price /Each $26.69

0482709

23.23

10_pHyd_97-146.qxd

3/11/07

2:49 PM

Page 135

HYD QUICK COUPLERS & CAM & GROOVE COUPLINGS Part B

Hydraulic (Double Shut-Off) Quick Couplers Cont.

Industrial Hose Accessories

Female x Male NPT

Pioneer 4000 Series Interchange Coupler with Hardened Steel Poppets Non-Valved Mold Plugs

Male Plug

Basic Size Size 1/4" 1/8" NPTF 1/4" 1/4" NPTF 1/4" 3/8" NPTF 3/8" 1/4" NPTF 3/8" 3/8" NPTF 3/8" 1/2" NPTF 1/2" 1/2" NPTF 1/2" 3/4" NPTF

Features:Double shut-off, general purpose. Temperature: -40°F to +225°F Pressure Rating: 3000 psi

Female Plug Male Plug (Brass) Price Part No. /Each 0482710 $1.05 0482711 1.46 0482712 1.39 0482716 1.39 0482717 1.55 0482718 2.80 0482721 4.23 0482722 6.13

Female Plug (Steel) Price Part No. /Each 0482713 $2.69 0482714 1.46 0482715 1.75 0482719 1.62 0482720 3.35

Size 1/4" 3/8" 1/2" 1/2" 1/2" 1/2" 3/4" 1"

0482723 0482724

4.89 7.73

Vendor No. C2-16 C3-21 C4-8 C4-10 C4-26 C4-31 C6-36 C8-36

Price /Each $13.55 14.51 16.97 17.68 15.07 20.39 51.68 64.11

Temperature: -40°F to +225°F Pressure Rating: 3000 psi

Part No. 0482731 0482732 0482733 0482734 0482735 0482736 0482737 0482738

Price /Each $49.49 48.80 52.80 44.49 60.92 62.38 115.06 185.86

Size 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6

Stainless Steel Price Part No. /Each 0400665 $21.59 0400666 23.85 0400667 34.28 0400668 34.93 0400669 43.45 0400670 58.80 0400671 72.43 0400672 104.49

Part C

Features:Double shut-off, general purpose. Temperature: -40°F to +225°F Pressure Rating: 3000 psi

Dripless Coupler

Female Thread 1/4" NPTF 3/8" NPTF 3/4-16 UNF 1/2" NPTF 1/2" NPTF 1-1/16" - 12" UNF 3/4" NPTF 1" NPTF

Part No. 0482747 0482748 0482749 0482750 0482751 0482752 0482753 0482754

Plug with Hardened Steel Poppets

Double Shut-Off Flat Face

Size 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 3/4" 1"

Female Thread 1/4" NPTF 3/8" NPTF 3/4"-16 UNF (ORB) 7/8"-14 UNF (ORB) 1/2" NPTF 3/4" NPTF 3/4" NPTF 1" NPTF

Aluminum Price Part No. /Each 0400507 $9.53 0400508 11.85 0400509 12.50 400445 10.98 400446 12.88 0400510 19.00 400447 19.87 400448 26.89 0400512 64.50

Size 1/4" 3/8" 1/2" 1/2" 1/2" 1/2" 3/4" 1"

Female Thread 1/4" NPTF 3/8" NPTF 3/4"-16 UNF (ORB) 7/8"-14 UNF (ORB) 1/2" NPTF 3/4" NPTF 3/4" NPTF 1" NPTF

Part No. 0482755 0482756 0482757 0482758 0482759 0482760 0482761 0482762

Vendor No. P2-16 P3-21 P4-8 P4-10 P4-26 P4-31 P6-31 P8-8

Price /Each $6.08 6.96 7.61 7.84 6.18 7.79 23.82 29.05

Cam and Groove Couplings (Hose & Pipe)

Female x Hose Shank 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6

Aluminum Price Part No. /Each 0400513 $7.99 0400514 9.79 0400515 10.25 400449 10.80 400450 13.91 0400516 18.50 400451 22.15 400452 32.52 0400517 56.27 0400518 61.75

Stainless Steel Price Part No. /Each 0400674 $19.98 0400675 22.27 0400676 34.40 0400677 34.97 0400678 42.50 0400679 49.98 0400680 84.75 0400681 113.37 0400682

284.33

Part D

Dripless Plug Temperature: -40°F to +225°F Pressure Rating: 3000 psi

Premium Cam and Groove Couplings (Hose and Pipe) Part A

Size 3/8" 3/8" 3/8" 1/2" 1/2" 3/4" 1"

Female Thread 3/8" NPTF 3/4"-16 UNF 1/2" NPTF 1/2" NPTF 1-1/16" UNF 3/4" NPTF 1" NPTF

Part No. 0482740 0482741 0482742 0482743 0482744 0482745 0482746

Price /Each $16.25 16.49 17.48 30.33 31.94 72.07 111.43

Male x Female NPT 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Aluminum Price Part No. /Each 0400500 $4.49 0400501 4.64 0400502 5.40 400441 4.64 400442 6.18 0400503 8.20 400443 10.30 400444 20.60 0400504 34.25 0400505 40.98

Stainless Steel Price Part No. /Each 0400656 $12.44 0400657 15.62 0400658 19.56 0400659 21.37 0400660 26.39 0400661 47.30 0400662 54.33 0400663 96.22 0400664

Female x Female NPT 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6

Aluminum Price Part No. /Each 0400520 $10.65 0400521 10.56 0400522 11.50 400453 11.39 400454 13.39 0400523 22.50 400455 20.45 400456 29.56 0400524 59.50 0400525 74.90

Stainless Steel Price Part No. /Each 0400683 $21.87 0400684 23.85 0400685 36.82 0400686 36.82 0400687 44.29 0400688 59.88 0400689 74.67 0400690 115.45

165.81

10-135 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_97-146.qxd

3/11/07

2:49 PM

Page 136

CAM & GROOVE COUPLINGS (HOSE & PIPE) Cam and Groove Couplings (Hose & Pipe)

Part DP (Dust Plug)

Utility Grade Cam and Groove Couplings Part A

Industrial Hose Accessories

Part E

Aluminum Price /Each $4.64 4.90 5.25 5.93 7.47

Male x Hose Shank 3/4 1 1-1/4 1-1/2 2

Part No. 0400527 0400528 0400529 0400530 0400531

2-1/2 3 4 5 6

0400532 0400533 0400534 0400535 0400536

12.25 13.39 24.92 44.27 49.87

Stainless Steel Price /Each $11.29 16.98 23.56 23.85 33.65

Part No. 0400692 0400693 0400694 0400695 0400696 0400697 0400698 0400699

49.65 69.25 99.97

Dust Plug 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6

Aluminum Price Part No. /Each 0400558 $3.94 0400559 4.10 0400560 4.20 0400561 4.25 0400562 4.87 0400563 7.25 0400564 7.55 0400565 13.92 0400566 26.92 0400567 31.50

Stainless Steel Price Part No. /Each 0400719 $7.65 0400720 14.82 0400721 19.25 0400722 18.97 0400723 22.38 0400724 42.65 0400725 47.43 0400726 54.88

Male x Female NPT 1.5 2 3 4

Aluminum Price Part No. /ea 0401565 $4.20 0401566 4.56 0401567 9.28 0401568 15.90

Stainless Steel Price Part No. /ea 0401595 $18.56 0401596 20.35 0401597 42.62

Part B Female x Male NPT

Cam and Groove Gaskets

Part F Buna-N

Aluminum Price /Each $4.25 4.90 6.99 6.25 7.73 14.50 16.48 23.98

Male x Male NPT 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4

Part No. 0400537 0400538 0400539 0400540 0400541 0400542 0400543 0400544

6

0400546

Stainless Steel Price /Each $14.84 20.75 28.25 30.55 37.25 57.95 71.87 96.69

Part No. 0400701 0400702 0400703 0400704 0400705 0400706 0400707 0400708

Part No. 0400728 0400729 0400730 0400731 0400732 0400733 0400734 0400735 0400736 0400737

Viton Price /Each $0.57 0.57 0.57 0.55 0.54 0.94 0.99 1.43 3.64 4.69

Aluminum Price Part No. /Each 0400547 $7.73 0400548 9.75 0400549 9.97 0400550 9.79 0400551 11.85 0400552 14.75 0400553 17.63 0400554 23.45 0400555 43.79 0400556 56.75

Size 1-1/2 2 3 4

Stainless Steel Price Part No. /Each 0400710 $18.85 0400711 20.55 0400712 33.69 0400713 33.65 0400714 38.55 0400715 48.65 0400716 61.65 0400717 87.95

10-136 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 0400742 0400743 0400744 0400745 0400746 0400747 0400748 0400749

Price /Each $3.99 6.10 8.58 8.79 9.97 15.29 13.79 25.74

Size 1-1/2 2 3 4

Aluminum Price Part No. /ea 0401569 $9.44 0401570 10.40 0401571 17.88 0401572 27.20

Stainless Steel Price Part No. /ea 0401599 $32.48 0401600 35.20 0401601 62.50

Part C

Extra Thick Cam and Groove Gaskets

56.65

Part DC (Dust Cap)

Dust Cap 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6

Size 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6

Part No. 0400738 0400739 0400740 0400741

Price /Each $2.52 1.43 2.34 1.95

Nylon & Polypropylene cam & groove fittings are also available. Please contact your local Fastenal Representative for more information.

Female x Hose Shank 1.5 2 3 4

Aluminum Part No. 0401573 0401574 0401575 0401576

Price /ea $9.80 11.48 19.80 29.50

Part D Female x Female NPT 2 3 4

Aluminum Price Part No. /ea 0401578 $11.60 0401579 20.44 0401580 29.20

Stainless Steel Price Part No. /ea 0401608 $38.24

10_pHyd_97-146.qxd

3/11/07

2:50 PM

Page 137

COUPLINGS, CROWFOOT FITTINGS & HOSE CLAMPS Chicago/Universal Fittings (Crowfoot Fittings)

4-Lug Female

Size 1-1/4 1-1/2 2

Hose End

Part E

Price /Each $8.78 8.64 11.25

Part No. 0400585 0400586 0400587

Accessories

Aluminum Price /ea $6.56 13.20

Male x Hose Shank 2 3

Part No. 0401581 0401582

Stainless Steel Price /ea $29.20

Part No. 0401612

Size 3/8 1/2" 3/4" 1"

Price /Each $3.66 3.34 3.25 3.98

Part No. 0400568 0400569 400457 0400571

Female

Part F Size 1/4 3/8 1/2"

Part No. 0400572 0400573 0400574

Price /Each $3.45 4.42 3.50

3/4" 1"

0400575 0400576

3.58 4.58

Description 3-WAY Connector Dead End 2-Lug Gaskets 4-Lug Gaskets Safety Clip & Lanyard Safety Clip only Lanyard only

Part No. 0400588 0400589 0400590 0400591 0400592 0400593 0400594

King Nipples

Male Male x Male NPT 1.5 2 3 4

Aluminum Price /ea $5.72 6.60 14.94 19.75

Part No. 0401583 0401584 0401585 0401586

Stainless Steel Price /ea $24.76 29.87

Part No. 0401615 0401616

Dust Cap

Size 1/4 3/8 1/2" 3/4" 1"

Price /Each $3.55 3.97 3.54 3.76 4.38

Part No. 0400577 0400578 0400579 0400580 0400581

Aluminum Price /ea

Part No.

0401588 0401589 0401590

9.60 16.20 22.94

Stainless Steel Price /ea $26.90 30.21 54.28

Part No. 0401619 0401620 0401621

Size 1-1/4 1-1/2 2

Size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6

Part No. 0400615 0400616 0400617 0400618 0400619 0400620 0400621 0400622 0400623 0400625

Price /Each $1.79 1.85 2.15 2.79 3.55 4.99 6.97 9.25 14.33 47.32

Suction Hose Strainers

4-Lug Hose End

Dust Cap 1.5 2 3 4

Price /Each $7.25 4.99 0.31 1.24 0.35 0.17 0.24

Price /Each $9.27 9.85 13.35

Part No. 0400582 0400583 0400584

Dust Plug

Part No. 400483 400484 400485 400486

Description 1-1/2 Strainer 2 Strainer 3 Strainer 4 Strainer

Price /Each $11.27 16.61 23.88 26.50

Hose Clamps 62 P Series: 5/16" stainless steel band and housing; 1/4" plated hex head screw

Dust Plug 1.5 2 3 4

Aluminum Price Part No. /ea 0401591 $3.84 0401592 4.60 0401593 7.56 0401594 13.60

Stainless Steel Price Part No. /ea 0401624

19.40

62 M Series: 5/16" all 300 series stainless steel band, housing, and 1/4" 300 series marine grade stainless steel hex head screw

Micro-Gear® Clamps Trade Size Min. Dia. Max. Dia. Pkg. Qty. 4 1/4" 5/8" 10 6 5/16" 7/8" 10 8 3/8 1 10 12 1/2 1-1/4 10 16 1/2 1-1/2 10 20 3/4 1-3/4 10 24 1 2 10 30 1-3/8 2-3/8 10

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

62 P Series Vendor Part No. No. 62002 6202/6204 62003 6203/6206 62004 62P08 62005 62P12 62006 62P16 0427667 62P20 0427668 62P24 0427669 62P30

Price /Each $0.74 0.77 0.77 0.79 0.79 0.81 0.81 0.81

62 M Series Vendor Price Part No. No. /Each 0427670 62602/62604 $0.79 0427671 62606 0.81 0427672 62M08 0.85 0427673 62M12 0.86 0427674 62M16 0.86 0427675 62M20 0.86 0427676 62M24 0.86 0427677 62M30 0.87

10-137 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Industrial Hose Accessories

Cam and Groove Couplings (Hose & Pipe) Cont.

10_pHyd_97-146.qxd

3/11/07

2:50 PM

Page 138

HOSE CLAMPS Hose Clamps Cont. Industrial Hose Accessories

1/2" Wide Clamps 57 Series: 1/2" stainless steel band and housing; 5/16" plated hex screw 67-1 Series: 1/2" stainless steel band, housing, and 5/16" hex screw 67-5 Series: 1/2" all high-nickel, corrosion resistant stainless steel band, housing and 5.16" hex screw

Trade Size 06 08 10 12 16 20 24 28 32 36 40 44 48 52 56 64 72 80 88 96

Min. Dia. 3/8 7/16 1/2 1/2 11/16 3/4 1 1-1/4 1-1/2 1-3/4

Max. Dia. 7/8 1 1-1/16 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4

Pkg. Qty. 10 10 10 10 10 10 10 10 10 10

Part No. 0427607 0427608 0427609 0427610 0427611 0427612 0427613 0427614 0427615 0427616

2 2-1/4 2-1/2 2-3/4 3 2-1/2 3 3-1/2 4 4-1/2

3 3-1/4 3-1/2 3-3/4 4 4-1/2 5 5-1/2 6 6-1/2

10 10 10 10 10 10 10 10 10 10

0427617 0427618 0427619 0427620 0427621 0427622 0427623 0427624 0427625 0427626

57 Series Vendor No. 5706 5708 5710 5712 5716 5720 5724 5728 5732 5736 5740 5744 5748 5752 5756 5764 5772 5780 5788 5796

Price /Each $0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.69

Part No. 0427627 0427628 0427629 0427630 0427631 0427632 0427633 0427634 0427635 0427636

0.82 0.88 0.88 0.95 0.95 0.99 1.14 1.28 1.28 1.28

0427637 0427638 0427639 0427640 0427641 0427642 0427643 0427644 0427645 0427646

67-1 Series Vendor No. 6706-1 6708-1 6710-1 6712-1 6716-1 6720-1 6724-1 6728-1 6732-1 6736-1 6740-1 6744-1 6748-1 6752-1 6756-1 6764-1 6772-1 6780-1 6788-1 6796-1

Price /Each $0.81 0.81 0.81 0.81 0.82 0.82 0.82 0.85 0.85 0.85

Part No. 0427647 0427648 0427649 0427650 0427651 0427652 0427653 0427654 0427655 0427656

0.88 0.99 0.99 1.06 1.06 1.20 1.28 1.34 1.40 1.72

0427657 0427658 0427659 0427660 0427661 0427662 0427663 0427664 0427665 0427666

67-5 Series Vendor No. 6706-5 6708-5 6710-5 6712-5 6716-5 6720-5 6724-5 6728-5 6732-5 6736-5

Price /Each $0.89 0.89 0.91 0.92 0.92 0.95 0.95 0.95 0.99 0.99

6740-5 6744-5 6748-5 6752-5 6756-5 6764-5 6772-5 6780-5 6788-5 6796-5

1.28 1.34 1.14 1.14 1.20 1.34 1.40 1.51 1.65 1.65

68 Series Vendor No. 6806 6808 6810 6812 6816 6820 6824 6828 6832 6836 6840 6844 6848 6852 6856 6864 6872 6880 6888 6896 68104

Price /Each $0.89 0.89 0.89 0.89 0.97 0.97 0.97 0.97 1.04 1.04 1.12 1.19 1.20 1.27 1.34 1.39 1.69 1.74 1.74 1.75 1.98

9/16" Wide Clamps 50 Series: 9/16" stainless steel band and housing; 5/16" plated hex head screw 63 Series: 9/16" all high-nickel, corrosion resistant stainless steel band, housing and 5/16" hex screw 68 Series: 9/16" stainless steel band, housing, and 5/16" hex head screw

Trade Size 06 08 10 12 16 20 24 28 32 36 40 44 48 52 56 64 72 80 88 96 104 128 152

Min. Dia. 3/8" 7/16" 1/2" 1/2" 11/16" 3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2" 2-1/4" 2-1/2" 2-3/4" 3" 2-1/2" 3" 3-1/2" 4" 4-1/2" 5" 2-1/2 2

Max. Dia. 7/8" 1" 1-1/16" 1-1/4" 1-1/2" 1-3/4" 2" 2-1/4" 2-1/2" 2-3/4" 3" 3-1/4" 3-1/2" 3-3/4" 4" 4-1/2" 5" 5-1/2" 6" 6-1/2" 7" 8-1/2 10

Pkg. Qty. 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

10-138 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 62008 62009 62010 62011 62012 62013 62014 62015 62016 62017 62018 62019 62020 62021 62022 62024 62025 62026 62027 62028 62029

50 Series Vendor No. 5006 5008 5010 5012 5016 5020 5024 5028 5032 5036 5040 5044 5048 5052 5056 5064 5072 5080 5088 5096 50104

Price /Each $0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.89 0.89 0.89 1.04 1.12 1.12 1.19 1.19 1.33 1.54 1.64 1.64 1.67 1.87

Part No. 62079 62062 62063 62064 62065 62066 62067 62090 62091 62092 62068 62080 62081 62069 62095 62082 62097 62098 62099 0427603 0427604 0427605 0427606

63 Series Vendor No. 6306 6308 6310 6312 6316 6320 6324 6328 6332 6336 6340 6344 6348 6352 6356 6364 6372 6380 6388 6396 63104 63128 63152

Price /Each $1.06 1.06 1.06 1.10 1.10 1.11 1.15 1.20 1.20 1.25 1.34 1.45 1.45 1.59 1.59 1.72 1.83 2.03 2.08 1.83 2.08 3.40 3.59

Part No. 62038 62039 62040 62041 62042 62043 62044 62045 62046 62047 62048 62049 62050 62051 62052 62054 62055 62056 62057 62058 62059

10_pHyd_97-146.qxd

3/11/07

2:50 PM

Page 139

HOSE CLAMPS Industrial Hose Accessories

Hose Clamps Cont.

Pow’r Gear® High Torque Clamps 60 Series: 5/8" band, heavy duty housing, 5/16" screw. All stainless steel. 6L Series: 5/8" lined band, heavy duty housing, 5/16" screw. All stainless steel.

Trade Size 175 212 262 312 362 412 462 512 562 612 662 712 762 812 862 912

Min. Dia. 1 1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4 4-1/4 4-3/4 5-1/4 5-3/4 6-1/4 6-3/4 7-1/4 7-3/4 8-1/4

Max. Dia. 1-34 2-1/8 2-5/8 3-1/8 3-5/8 4-1/8 4-5/8 5-1/8 5-5/8 6-1/8 6-5/8 7-1/8 7-5/8 8-1/8 8-5/8 9-1/8

Pkg. Qty. 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Part No. 0427678 0427679 0427680 0427681 62304 62305 62306 62307 0427682 62308 0427683 62309 0427684 0427685 0427686 0427687

60 Series Vendor No. 60175 60200 60250 60300 60350 60400 60450 60500 60550 60600 60650 60700 60750 60800 60850 60900

Price /Each $2.52 2.52 2.54 2.76 2.81 2.84 2.93 3.07 3.10 3.17 3.47 3.59 3.88 3.95 4.03 4.12

Part No. 0427688 0427689 0427690 0427691 0427692 0427693 0427694 0427695 0427696 0427697 0427698 0427699 0427700 0427701 0427702 0427703

6L Series Vendor No. 6L175 6L200 6L250 6L300 6L350 6L400 6L450 6L500 6L550 6L600 6L650 6L700 6L750 6L800 6L850 6L900

Price /Each $2.70 2.70 2.71 2.95 3.01 3.04 3.13 3.28 3.31 3.39 3.71 3.84 4.15 4.23 4.32 4.41

10-139 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_97-146.qxd

3/11/07

2:50 PM

Page 140

HOSE CLAMPS Hose Clamps Cont.

Flex-Gear® Light Duty Constant Tension Clamps

Industrial Hose Accessories

9/16" light duty 300 series stainless steel band, spring and liner; 5/16" 410 stainless steel hex head screw

Snaplock ® Quick Release Clamps 56 Series: 9/16" stainless steel band, swivel housing; plated 5/16" screw 58 Series: 9/16" stainless steel band, swivel housing; 3/8" stainless steel screw 56 Series 58 Series Trade Vendor Price Vendor Size Min. Dia. Max. Dia. Pkg. Qty. Part No. No. /Each Part No. No. 12 1/2 1-1/4 10 62250 5612 $1.81 0427704 5812 20 3/4 1-3/4 10 62251 5620 1.59 0427705 5820 28 1 2-1/4 10 62252 5628 1.62 0427706 5828 36 1 2-3/4 10 62253 5636 1.65 0427707 5836 48 1-1/2 3-1/2 10 62254 5648 1.68 0427708 5848 56 1 4 10 62255 5656 1.75 0427709 5856 72 2 5 10 62256 5672 1.89 0427710 5872 88 2 6 10 62257 5688 2.21 0427711 5888 104 1-3/4 7 10 62258 56104 2.27 0427712 58104 116 1-3/4 7-3/4 5 0427713 58116 128 2-1/4 8-1/2 10 62259 56128 2.97 0427714 58128 152 2 10 10 62260 56152 3.02 0427715 58152 188 2 12-1/4 10 62261 56188 3.09 0427716 58188

Price /Each $1.66 1.75 1.72 1.83 2.15 2.21 2.72 2.99 3.28 3.59 3.65 3.96 4.40

Flexible Shaft Hose Clamp Driver • Flexes 90 degrees and comes with a reversible socket drive for 1/4" and 5/16" hex heads. • Fits typical mini and standard size hex heads. • Great for work in tight spaces like compact car and boat engines, irrigation systems, etc. • Heavy Duty Construction • Flexible shaft up to 90 degrees. • Extra grip on handle.

Vendor No. 800019999058

Part No. 0401024

Description 1/4 or 5/16 Interchangeable Flexible Shaft Hose Clamp Driver

Price /Each $9.25

Trade Size 10 12 16 20 24 28 32 36 40 44 48

Min. Dia. 9/16 5/8 13/16 13/16 1-1/16 1-5/16 1-9/16 1-13/16 2-1/16 2-5/16 2-9/16

Max. Dia. 1-1/16 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3 3-1/4 3-1/2

Pkg. Qty. 10 10 10 10 10 10 10 10 10 10 10

Part No. 0427733 0427734 0427735 0427736 0427737 0427738 0427739 0427740 0427741 0427742 0427743

Vendor No. 47010 47012 47016 47020 47024 47028 47032 47036 47040 47044 47048

Price /Each $3.81 3.99 4.11 4.24 4.36 4.37 4.56 4.57 4.61 5.80 5.86

Hose Clamp Rack Kits - Stainless Steel Small Diameters PART NO. 99357 Use in conjunction with storage rack Part No. 62968 (sold separately)

Part No. 99357 62968

Price /Each $59.35 34.96

Description Hose Clamp Assortment Rack for 99357

Hose clamp assortment contains the following clamps: Part No. 62002 62003 62008 62010 62011 62012 62013 62015 62016 62017

Trade Size micro 4 micro 6 06 10 12 16 20 28 32 36

MIn. Diameter 1/4 5/16 3/8 1/2 1/2 11/16 3/4 1-1/4 1-1/2 1-3/4

Max. Diameter 5/8 7/8 7/8 1-1/16 1-1/4 1-1/2 1-3/4 2-1/4 2-1/2 2-3/4

Pkg. Qty. 10 10 10 10 10 10 10 10 10 10

Vendor No. 6202/6204 6203/6206 5006 5010 5012 5016 5020 5028 5032 5036

Hose Clamp Rack Kits (Large) Flex-Gear HD® Constant Tension Clamps

Large Diameters PART NO. 99360

5/8" heavy-duty 300 series stainless steel band, spring and liner; 3/8" 410 stainless steel hex head screw

Use in conjunction with storage rack Part No. 62967 (sold separately)

Trade Size 175 212 262 312 362 412 462 512 562 612 662 712 762 812 862 912

Min. Dia. 1 1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4 4-1/4 4-3/4 5-1/4 5-3/4 6-1/4 6-3/4 7-1/4 7-3/4 8-1/4

Max. Dia. 1-3/4 2-1/8 2-5/8 3-1/8 3-5/8 4-1/8 4-5/8 5-1/8 5-5/8 6-1/8 6-5/8 7-1/8 7-5/8 8-1/8 8-5/8 9-1/8

Pkg. Qty. 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

Part No. 0427717 0427718 0427719 0427720 0427721 0427722 0427723 0427724 0427725 0427726 0427727 0427728 0427729 0427730 0427731 0427732

10-140 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Vendor No. 45175 45200 45250 45300 45350 45400 45450 45500 45550 45600 45650 45700 45750 45800 45850 45900

Price /Each $6.26 6.33 6.64 6.71 6.72 6.76 6.92 6.94 6.99 6.99 7.11 7.22 7.28 7.36 7.46 7.56

Part No. 99360 62967

Price /Each $51.96 34.96

Description Hose Clamp Assortment Rack for 99360

Hose clamp assortment contains the following clamps: Part No. 62018 62020 62021 62022 62025

Vendor No. 5040 5048 5052 5056 5072

Trade Size 40 48 52 56 72

Min. Diameter 2 2-1/2 2-3/4 3 3

Max. Diameter 3 3-1/2 3-3/4 4 5

Pkg. Qty. 10 10 10 10 10

10_pHyd_97-146.qxd

3/29/07

3:53 PM

Page 10–141

Hose Clamps Cont. Breeze Make-AClamp Part No. 62070

Vendor No. 4000

62071

4001

62072

4002

62073 62074 62075

4003 4004 4005

62076

4006

62078

4008

Description Mini Kit, 8-1/2 ft. band, 3 adj. fasteners, 1 band splice Kit with 100 ft. band, 25 adj. fasteners, 10 band splices Kit with 50 ft. band, 10 adj. fasteners, 5 band splices Adj. Fasteners 10' Adj. Fasteners Box with 100 ft. band, 10 band splices Box with 50 ft. band, 5 band splices Splices

Price /Each $14.45 114.47 53.64 2.31 2.41 57.75 31.26 2.22

Turn Key® Clamps Innovative design installs with a simple hand twist, no tools required. Easy to remove and replace. Pull off the screw cap for a tamper-resistant connection. Installation torque: 30-35 in.-lbs.; 3.4 - 4.0 Nm

• Injection molded thermoplastic screw cap, removable and reusable. • Screw: Plated carbon steel • Band: 1/2" band width. 201/301 stainless steel • Housing: 201/301 stainless steel Part No. 0401018 0401019 0401020 0401021 0401022 0401023

Vendor Trade Price No. Pkg. Qty. Size /Each 6B00458 2 of each Micros 4 & 6 $2.45 5B01258 2 Pcs 12 1.99 5B02058 2 Pcs 20 2.25 5B02858 2 Pcs 28 2.25 5B03658 2 Pcs 36 2.39 5B00158 6 Pcs Micros 4,6,12,20,28,36 6.89

T-Bolt Clamps

2-Ear Clamps

Stainless Steel band with zinc coated T-bolt. For permanent or semi-permanent applications and/or safety on pressurized systems.

• Robust, durable one-piece design offers positive, tamper resistant seal • For air and fluid media lines • Quick and easy installation • Smooth edges prevent damage to hose • Zinc-plated

Size 1-1/2 1-3/4 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-7/8 3 3-1/8 3-1/4 3-1/2 4 4-1/2 5 5-1/2 6 6-1/2 7

Range min.-max. (in) 1.375 - 1.625 1.625 - 1.875 1.875 - 2.125 2.000-2.3125 2.0625-2.375 2.125-2.4375 2.25-2.5625 2.375-2.6875 2.625-2.9375 2.75-3.0625 2.875-3.1875 3.000-3.3125 3.25-3.5625 3.75-4.0625 4.25-4.5625 4.75-5.0625 5.25-5.5625 5.75-6.0625 6.25-6.5625 6.75-7.0625

Part No. 0427926 0427927 0427928 0427929 0427930 0427931 0427932 0427933 0427934 0427935 0427936 0427937 0427938 0427939 0427940 0427941 0427942 0427943 0427944 0427945

Price /Each $2.99 2.99 3.99 3.99 3.27 3.29 3.32 3.34 5.73 3.40 3.42 3.30 3.46 3.35 3.55 3.60 4.97 3.73 3.63 3.70

Oetiker Clamps

Size 5/32 11/64 3/16 1/4 5/16 3/8 1/2 9/16 9/32 5/8 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8

Part No. 0427954 0427955 0427956 0427957 0427958 0427959 0427961 0427962 0427963 0427964 0427965 0427966 0427967 0427968 0427969 0427952 0427951

Vendor No. 10100000 10100001 10100002 10100004 10100008 10100011 10100016 10100019 10100022 10100024 10100027 10100029 10100030 10100032 10100034 10100035 10100037

Price /Each $0.27 0.27 0.27 0.31 0.31 0.31 0.31 0.32 0.34 0.34 0.35 0.37 0.40 0.45 0.47 0.49 0.51

1-5/16 1-7/16 1-1/2 1-5/8 1-3/4

0427949 0427948 0427953 0427947 0427946

10100041 10100043 10100045 10100047 10100049

0.53 0.62 0.58 0.60 0.62

Clamp Maintenance Kits Stepless Ear Clamps • Precise tongue-in-groove stepless design provides smooth inner circumference for 360° uniform seal • Narrow band for concentrated seal compression • Smooth-edged bandsteel prevents damage to hose • Lightweight, strong low clearance design • Tampering is visible • Stainless steel Size 1/4 9/32 5/16 11/32 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 17/32 35/64 9/16 19/32 5/8 21/32 11/16 23/32 3/4 13/16 7/8 15/16 1

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Part No. 0427970 0427971 0427972 0427973 0427974 0427975 0427976 0427977 0427978 0427979 0427980 0427981 0427982 0427983 0427984 0427985 0427986 0427987 0427988 0427989 0427990 0427991 0427992 0427993 0427994 0427995

Vendor No. 16702487 16700983 16700984 16700985 16700986 16700987 16700988 16702614 16700989 16700990 16700992 16702490 16700993 16700995 16700997 16700999 16701002 16701005 16702544 16701009 16701015 16701021 16701029 16701041 16701058 16701072

Price /Each $0.32 0.33 0.33 0.33 0.33 0.33 0.33 0.33 0.35 0.34 0.37 0.36 0.36 0.36 0.36 0.37 0.40 0.40 0.40 0.42 0.42 0.43 0.42 0.48 0.48 0.48

Service Kit Contains: Clamps: 15 each of sizes 5/16", 3/8", 1/"2, 9/16" and 5/8". 12 of each of sizes 3/4", 7/8", 15/16", 1" and 1 pair of pincers. Large Service/Maintenance kit contains: 50 of 3/8", 50 of 1/2", 50 of 9/16" 50 of 5/8", 25 of 3/4", 25 of 7/8" 5 of 1/4", 5 of 5/16", 5 of 3/8" 5 of 1/2", Hose menders and 1 pair pincers. Vendor Part No. No. 0427996 18500130

Description 123 pc.Service Kit with 1 pair Pincers 0427997 18500045 270 pc.Large Service Maintenance Clamp Kit

Price /Each $87.75 199.55

Stepless® Ear Clamp Kit • 81 Piece • 1/2" to 1-1/4" w/ Standard Jaw Pincer • Stepless® Ear Clamps (Stainless Steel) • 360° Seal Stepless® Ear Clamp Kit Contains: 10 each: 1/2", 9/16", 5/8", 23/32", 7/8", 1", 1-1/8", 11/4", and one pair of pincers Part No. 0400401

Vendor No. 18500060

Product 81 Piece Stepless® Ear Clamp Kit

Price /EA $69.50

Pincers

Part No. 0427999 0427998

Vendor No. 14100083 14100082

Description Side Jaw Pincer Standard Jaw Pincer

Price /Each $37.33 32.05

10–141 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Industrial Hose Accessories

T-BOLT, TURNKEY AND OETIKER HOSE CLAMPS

10_pHyd_97-146.qxd

3/11/07

2:51 PM

Page 142

BANDING COILS & BUCKLES AND SOLID SHAFT COLLARS Shaft Collars

Banding Coils and Buckles Industrial Hose

Accessories & Power Drive

Zinc Steel Solid Collars • Set Screw Collar • Traditional cost effective collar design • Zinc plated steel

Stainless Bands • 201 Stainless steel • 100 foot rolls • Color coded for easy identification Part No. 62103 62104 62105 62106 62107

Vendor No. C202 C203 C204 C205 C206

Type

Thickness .20 .25 .30 .30 .30

Weight (lbs) 1.7 3.2 5.1 6.4 7.7

Width 1/4 3/8 1/2 5/8 3/4

Breaking Strength 500 900 1500 1875 2250

Price $54.71 71.03 96.01 116.57 143.25

Stainless Buckles

Vendor No. C252 C253 C254 C255 C256

Part No. 62108 62109 62110 62111 62112

Type 201 Stainless Steel 201 Stainless Steel 201 Stainless Steel 201 Stainless Steel 201 Stainless Steel

Size 1/4 3/8 1/2 5/8 3/4

Price $0.45 0.49 0.66 0.82 1.01

Galvanized Bands

Part No. 62114 62115

Vendor No. C304 C306

Type Carbon Steel Carbon Steel

Thickness .030 .030

Width 1/2 3/4

Weight (lbs) 5.1 7.7

Breaking Strength 1125 1690

Price $51.02 74.59

Galvanized Buckles

Part No. 62117 62118

Vendor No. C354 C356

Type Carbon Steel Carbon Steel

Size 1/2 3/4

Price $0.42 0.83

Band-It Tool Drop forged tool with built-in cutter tensions over 2,400 lbs. Spring-loaded gripper lever and friction-held cutoff lever with plastic grip improves ease-ofuse. Blue, epoxy powder coated finish minimizes impact, chemical, and corrosive elements. Use to apply band, strapping, and Free-End Clamps. Part No. 62102

Vendor No. C001

Weight (lbs) 4.4

10-142 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price $160.50

I.D. 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/16 1-3/4 1-7/8 1-15/16 2 2-1/8 2-3/16 2-1/4 2-5/16 2-3/8 2-7/16 2-1/2 2-9/16 2-5/8 2-11/16 2-3/4 2-7/8 2-15/16 3 3-1/4 3-7/16 3-1/2 3-15/16 4 4-3/16 4-1/4 4-7/16 4-1/2 4-15/16

O.D. 3/8 7/16 1/2 5/8 3/4 7/8 1" 1 1-1/8 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2" 1-3/4 1-3/4 2 2 2-1/8 2-1/8 2-1/4 2-1/4 2-1/2 2-1/2 2-1/2 2-5/8 2-3/4 2-3/4 3 3 3 3-1/4 3-1/4 3-1/4 3-1/4 3-1/2 3-1/2 3-3/4 4 4 4 4 4 4 4-1/4 4-1/2 4-3/4 5 5 5-1/2 5-1/2 5-1/2 5-1/2 6

Width 1/4 1/4 5/16 5/16 3/8 7/16 7/16" 7/16 1/2 9/16 9/16 9/16 9/16 9/16 5/8" 5/8 5/8 11/16 11/16 11/16 3/4 3/4 3/4 13/16 13/16 13/16 7/8 7/8 7/8 7/8 7/8 7/8 15/16 15/16 15/16 15/16 1 1 1 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-/8 1-1/4 1-1/4

Vendor No. C-012 C-018 C-025 C-031 C-037 C-043 C-050 C-056 C-062 C-068 C-075 C-081 C-087 C-093 C-100 C-106 C-112 C-118 C-125 C-131 C-137 C-143 C-150

Climax Brand Domestic Price Part No. /Ea 0402911 $0.75 0402912 0.75 0402913 0.75 0402914 0.81 0402915 0.86 0402916 1.10 0402917 1.03 0402918 1.16 0402919 1.22 0402920 1.61 0402921 1.48 0402922 1.85 0402923 1.81 0402924 2.00 0402925 1.81 0402926 3.13 0402927 3.06 0402928 3.68 0402929 3.51 0402930 4.38 0402931 3.92 0402932 4.29 0402933 4.22

C-162 C-168 C-175

0402934 0402935 0402936

6.06 6.27 7.15

C-187 C-193 C-200 C-212 C-218 C-225

0402937 0402938 0402939 0402940 0402941 0402942

8.48 9.30 9.65 10.15 11.07 11.80

C-237 C-243 C-250

0402943 0402944 0402945

12.54 12.52 12.52

C-262

0402946

22.12

C-275 C-287 C-293 C-300

0402947 0402948 0402949 0402950

22.82 28.74 26.13 26.13

Fastenal Quality Import Price Part No. /Ea 33364 $0.67 33365 0.67 33370 0.67 33371 0.72 33372 0.77 33373 0.99 33374 0.93 33366 1.05 33375 1.09 33367 1.45 33376 1.33 33368 1.67 33377 1.63 33369 1.80 33378 1.63 33361 2.82 33382 2.75 33383 3.31 33379 3.15 33381 3.94 33392 3.52 33393 3.86 33380 3.77 33402 4.97 33403 5.45 33597 5.64 33578 6.44 33565 7.79 33566 7.63 33567 8.37 33568 8.69 33569 9.14 33598 9.96 33570 10.62 33571 10.37 33572 11.26 33599 11.27 33573 11.27 33600 18.00 33657 19.91 33658 18.21 33574 20.52 33679 25.85 33680 23.52 33575 23.52 0403383 41.29 0403384 41.29 0403385 41.29 0403386 51.43 0403387 66.08 0403388 66.08 0403389 66.08 0403390 66.08 0403391 66.08 0403393 79.84

10_pHyd_97-146.qxd

3/11/07

2:51 PM

Page 143

SOLID & ONE PIECE SPLIT Shaft Collars Cont.

Black Oxide Steel Split 1 Piece Collar

Stainless Steel Solid Collar

• Design fully engages shaft without marring • Greater axial holding power than set screw collars • Effective on hard & soft shafts; Black Oxide Steel

I.D. 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-13/16" 1-7/8" 1-15/16" 2"

O.D. 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1" 1" 1-1/8" 1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-1/2" 1-3/4" 1-3/4" 2" 2" 2-1/8 2-1/8 2-1/4" 2-1/4" 2-1/2 2-1/2" 2-1/2 2-5/8" 2-3/4 2-3/4 3" 3"

Width 1/4" 1/4" 5/16" 5/16" 3/8" 7/16" 7/16" 7/16" 1/2" 9/16" 9/16" 9/16" 9/16" 9/16" 5/8" 5/8" 5/8" 11/16" 11/16" 11/16 3/4 3/4" 3/4" 13/16 13/16" 13/16 7/8" 7/8 7/8 7/8" 7/8"

Power Drive

• Set Screw Collar • Traditional cost effective collar design • Stainless Steel

Vendor No. C-012-S C-018-S C-025-S C-031-S C-037-S C-043-S C-050-S C-056-S C-062-S C-068-S C-075-S C-081-S C-087-S C-093-S C-100-S C-106-S C-112-S C-118-S C-125-S

Climax Brand Domestic Price Part No. /Ea 0402951 $2.63 0402952 2.43 0402953 2.37 0402954 2.57 0402955 2.82 0402956 3.40 0402957 3.48 0402958 4.30 0402959 4.38 0402960 5.96 0402961 5.32 0402962 7.34 0402963 7.97 0402964 10.03 0402965 9.40 0402966 12.95 0402967 12.14 0402968 14.63 0402969 15.22

C-143-S C-150-S

0402970 0402971

18.91 18.19

C-162-S

0402972

25.10

C-175-S

0402973

32.78

C-193-S C-200-S

0402974 0402975

40.90 39.34

Fastenal Quality Import Price Part No. /Ea 34223 $2.37 34224 2.19 34225 2.15 34226 2.32 34227 2.55 34228 2.99 34229 3.14 34230 3.89 34231 3.95 34232 5.37 34233 4.79 34234 6.59 34235 7.25 34236 9.15 34237 8.49 34238 11.70 34239 10.97 34240 13.25 34241 13.75 34242 14.07 34243 14.25 34244 17.22 34245 16.45 34246 19.55 34247 22.69 34248 20.18 34249 29.63 34250 26.78 34251 30.05 34252 36.97 34253 35.55

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

I.D. 1/8" 3/16" 1/4 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-7/8' 1-15/16" 2" 2-1/8" 2-3/16" 2-1/4" 2-3/8" 2-7/16" 2-1/2" 2-3/4" 2-15/16" 3"

O.D. 11/16 11/16 11/16" 11/16" 7/8" 15/16" 1-1/8" 1-5/16 1-5/16" 1-1/2 1-1/2" 1-5/8 1-5/8" 1-3/4" 1-3/4" 1-7/8 1-7/8" 2-1/16" 2-1/16" 2-1/4" 2-1/4" 2-1/4" 2-3/8" 2-3/8 2-5/8" 2-3/4 2-3/4" 2-7/8 3" 3" 3-1/4" 3-1/4" 3-1/4" 3-1/2" 3-1/2" 3-3/4" 4" 4-1/4" 4-1/4"

Width 5/16 5/16 5/16" 5/16" 3/8" 3/8" 13/32" 7/16 7/16" 1/2 1/2" 1/2 1/2" 1/2" 1/2" 1/2 1/2" 1/2" 1/2" 9/16" 9/16" 9/16" 9/16" 9/16 11/16" 11/16 11/16" 11/16 11/16" 11/16" 3/4" 3/4" 3/4" 3/4" 3/4" 7/8" 7/8" 7/8" 7/8"

Vendor No.

Climax Brand Domestic Price Part No. /Each

1C-025 1C-031 1C-037 1C-043 1C-050

0402800 0402801 0402802 0402803 0402804

2.32 2.32 2.32 2.94 2.70

1C-062

0402805

3.45

1C-075

0402806

3.83

1C-087 1C-093 1C-100

0402807 0402808 0402809

4.57 5.67 4.67

1C-112 1C-118 1C-125 1C-131 1C-137 1C-143 1C-150

0402810 0402811 0402812 0402813 0402814 0402815 0402816

5.91 6.22 5.73 7.35 6.68 7.03 6.99

1C-162

0402817

12.87

1C-175

0402818

12.36

1C-193 1C-200 1C-212 1C-218 1C-225 1C-237 1C-243 1C-250 1C-275 1C-293 1C-300

0402819 0402820 0402821 0402822 0402823 0402824 0402825 0402826 0402827 0402828 0402829

14.73 13.98 17.31 17.67 18.05 19.89 19.91 30.09 34.97 39.35 38.26

Fastenal Quality Import Price Part No. /Each 34259 $2.37 34260 2.37 34261 1.98 34262 1.98 34263 1.99 34264 2.65 34265 2.44 34266 3.06 34267 3.15 34268 3.50 34269 3.45 34270 5.75 34271 4.15 34272 5.16 34273 4.22 34274 5.42 34275 5.34 34276 5.65 34277 5.25 34278 6.65 34279 5.98 34280 6.35 34281 6.32 34282 9.44 34283 11.65 34284 11.91 34285 11.22 34286 13.63 34287 13.35 34288 12.65 34289 15.66 34290 15.97 34291 16.33 34292 17.98 0403433 17.99 34293 27.20 34295 31.55 0403435 35.50 34297 34.59

10-143 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_97-146.qxd

3/11/07

2:51 PM

Page 144

ONE PIECE & TWO PIECE SPLIT SHAFT COLLARS Shaft Collars Cont.

Black Oxide Steel- Two Piece Split Collar

Stainless Steel Split - One Piece Collar Power Drive

• Design fully engages the shaft without marring • Easily installed with limited disassembly required • Effective on hard & soft shafts; Black Oxide Steel

• Design fully engages shaft without marring • Greater axial holding power than set screw collars • Effective on hard & soft shafts; Stainless Steel

I.D. 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4"

O.D. 11/16 11/16 11/16" 11/16" 7/8" 15/16" 1-1/8" 1-5/16" 1-5/16" 1-1/2 1-1/2"

Width 5/16 5/16 5/16" 5/16" 3/8" 3/8" 13/32" 7/16" 7/16" 1/2 1/2"

15/16" 1" 1-1/8" 1-3/16" 1-1/4" 1-3/8" 1-7/16" 1-1/2" 1-5/8 1-3/4" 1-7/8" 1-15/16" 2"

1-3/4 1-3/4" 1-7/8" 2-1/16 2-1/16" 2-1/4" 2-1/4" 2-3/8" 2-5/8 2-3/4" 2-7/8 3" 3"

1/2 1/2" 1/2" 1/2 1/2" 9/16" 9/16" 9/16" 11/16 11/16" 11/16 11/16" 11/16"

Vendor No.

Climax Brand Domestic Price Part No. /Each

1C-025-S 1C-031-S 1C-037-S 1C-043-S 1C-050-S 1C-056-S 1C-062-S

0402830 0402831 0402832 0402833 0402834 0402835 0402836

1C-075-S

0402837

9.75

1C-093-S 1C-100-S 1C-112-S

0402838 0402839 0402840

16.26 11.98 14.66

1C-125-S 1C-137-S 1C-143-S 1C-150-S 1C-162-S 1C-175-S

0402841 0402842 0402843 0402844 0402845 0402846

16.41 20.64 20.64 21.99 51.18 42.42

1C-193-S 1C-200-S

0402847 0402848

50.89 48.34

10-144 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

4.43 4.61 5.77 6.35 7.31 8.43 8.18

Fastenal Quality Import Price Part No. /Each 34461 $3.61 34462 3.76 34463 3.95 34464 4.15 34465 5.13 34466 5.65 34467 6.51 34468 7.49 34469 7.29 34470 7.91 34471 8.67 0403737 34473 34474 34475 34476 34477 34478 34479 0403751 34480 34481 34482 34483

14.49 1.65 12.98 14.08 14.65 18.25 18.25 19.57 45.55 37.75 39.32 45.29 42.99

I.D. 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-7/8" 1-15/16" 2" 2-1/8" 2-3/16" 2-1/4" 2-3/8" 2-7/16"

O.D. 11/16 11/16 11/16" 11/16" 7/8" 15/16" 1-1/8" 1-5/16" 1-5/16" 1-1/2" 1-1/2" 1-5/8 1-5/8" 1-3/4" 1-3/4" 1-7/8" 1-7/8" 2-1/16 2-1/16" 2-1/4" 2-1/4" 2-1/4" 2-3/8" 2-3/8" 2-5/8" 2-3/4" 2-3/4" 2-7/8" 3" 3" 3-1/4" 3-1/4" 3-1/4" 3-1/2" 3-1/2"

Width 5/16 5/16 5/16" 5/16" 3/8" 3/8" 13/32" 7/16" 7/16" 1/2" 1/2" 1/2 1/2" 1/2" 1/2" 1/2" 1/2" 1/2 1/2" 9/16" 9/16" 9/16" 9/16" 9/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 3/4" 3/4" 3/4" 3/4" 3/4"

2-1/2" 2-5/8" 2-3/4" 2-15/16" 3" 3-3/16" 3-1/4" 3-7/16" 3-1/2" 3-15/16" 4" 4-1/4" 4-7/16" 4-1/2" 4-15/16" 5" 5-1/2" 5-15/16" 6"

3-3/4" 3-7/8" 4" 4-1/4" 4-1/4" 4-1/2" 4-1/2" 4-3/4" 4-3/4" 5-1/4" 5-1/4" 5-1/2" 5-3/4" 5-3/4" 6-1/4" 6-1/4" 6-3/4" 7-1/4" 7-1/4"

7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8"

Vendor No.

Climax Brand Domestic Price Part No. /Each

2C-025 2C-031 2C-037 2C-043 2C-050 2C-056 2C-062 2C-068 2C-075

0402849 0402850 0402851 0402852 0402853 0402854 0402855 0402856 0402857

4.58 4.65 4.17 4.41 4.29 5.32 5.12 6.19 5.96

2C-087 2C-093 2C-100 2C-106 2C-112

0402858 0402859 0402860 0402861 0402862

6.57 7.90 6.48 8.07 7.86

2C-125 2C-131 2C-137 2C-143 2C-150 2C-156 2C-162 2C-168 2C-175 2C-187 2C-193 2C-200 2C-212 2C-218 2C-225 2C-237 2C-243

0402863 0402864 0402865 0402866 0402867 0402868 0402869 0402870 0402871 0402872 0402873 0402874 0402875 0402876 0402877 0402878 0402879

7.70 9.19 8.68 8.68 8.68 15.47 15.47 15.83 14.31 17.67 16.60 15.93 18.76 19.69 19.14 21.01 23.94

2C-250 2C-262 2C-275 2C-293 2C-300

0402880 0402881 0402882 0402883 0402884

34.92 42.31 44.16 42.93 42.93

Fastenal Quality Import Price Part No. /Each 34298 $6.27 34299 4.02 34300 3.95 34301 4.15 34302 3.71 34303 3.92 34304 3.81 34305 4.74 34306 4.55 34307 5.50 34308 5.35 34309 6.17 34310 5.85 34311 6.98 34312 5.77 34313 7.22 34314 6.99 34315 7.58 34316 6.85 34317 8.22 34318 7.73 34319 7.73 34320 7.73 34321 13.76 34322 13.76 34323 13.97 34324 12.73 34325 15.75 34326 14.77 34327 14.23 34328 16.79 34329 17.49 34330 16.97 34331 18.69 0403440 21.35 34332 34333 34334 0403442 34336 0403402 0403403 0403404 0403405 0403406 0403407 0403408 0403409 0403410 0403411 0403412 0403413 0403414 0403415

31.30 37.65 39.25 38.29 38.29 36.27 37.20 40.29 39.19 60.81 69.47 60.53 90.80 94.43 110.08 107.79 123.83 151.41 151.41

10_pHyd_97-146.qxd

3/11/07

2:51 PM

Page 145

SPLIT & RECESSED SCREW SHAFT COLLARS Split - Recessed Screw - One Piece Black Oxide Steel

Shaft Collars Cont.

Power Drive

Split - Two Piece Stainless Steel Split Collar

I.D. 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 7/8 1 1-1/8 1-3/16 1-1/4 1-3/8 1-7/16 1-1/2 1-5/8 1-3/4 1-7/8 1-15/16 2 2-1/4 2-3/8 2-1/2

O.D. 11/16 11/16 11/16 11/16 7/8 15/16 1-1/8 1-5/16 1-5/16 1-1/2 1-1/2 1-5/8 1-3/4 1-7/8 2-1/16 2-1/16 2-1/4 2-1/4 2-3/8 2-5/8 2-3/4 2-7/8 3 3 3-1/4 3-1/2 3-3/4

Width 5/16 5/16 5/16 5/16 3/8 3/8 13/32 7/16 7/16 1/2 1/2 1/2 1/2 1/2 1/2 1/2 9/16 9/16 9/16 11/16 11/16 11/16 11/16 11/16 3/4 3/4 7/8

Vendor No.

Climax Brand Domestic Price Part No. /Each

2C-025-S 2C-031-S 2C-037-S 2C-043-S 2C-050-S 2C-056-S 2C-062-S

0402885 0402886 0402887 0402888 0402889 0402890 0402891

6.54 6.96 8.72 9.07 10.19 12.21 12.56

2C-075-S 2C-087-S 2C-100-S 2C-112-S 2C-118-S 2C-125-S 2C-137-S 2C-143-S 2C-150-S 2C-162-S 2C-175-S 2C-187-S 2C-193-S 2C-200-S 2C-225-S 2C-237-S 2C-250-S

0402892 0402893 0402894 0402895 0402896 0402897 0402898 0402899 0402900 0402901 0402902 0402903 0402904 0402905 0402906 0402907 0402908

13.33 14.90 16.13 19.10 21.02 20.27 25.45 25.45 26.62 48.96 47.99 57.84 56.97 56.97 81.01 86.77 102.18

Fastenal Quality Import Price Part No. /Each 34484 $7.34 34485 7.36 34486 5.83 34487 6.21 34488 7.78 34489 8.10 34490 9.10 34491 10.87 34492 11.25 34493 15.66 34494 11.85 34495 13.25 34496 14.36 34497 16.99 34498 18.72 34499 17.98 34500 22.65 34501 22.65 34502 23.69 0403416 43.55 34503 42.69 34504 51.50 34505 51.20 34506 51.20 0403418 71.97 0403419 77.25 0403421 89.75

O.D. 13/16 13/16 13/16 13/16 1-1/16 1-1/16 1-1/4 1-1/4 1-1/2 1-3/4 1-7/8 2 2-1/8 2-1/8 2-1/4 2-3/8 2-1/2 3-1/4 3-1/4

Width 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 13/32 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8

Set Screw Size 4-40 4-40 4-40 4-40 6-32 6-32 8-32 8-32 10-32 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 5/16-24 5/16-24

O.D. 13/16 13/16 13/16 13/16 1-1/16 1-1/16 1-1/4 1-1/4 1-1/2 1-1/2 1-3/4 1-3/4 1-7/8 1-7/8 2 2 2-1/8 2-1/8 2-1/4 2-1/4 2-3/8 2-3/8 2-1/2 2-1/2 3 3 3 3-1/4 3-1/4 3-1/4

Set Screw Size 4-40 4-40 4-40 4-40 6-32 6-32 8-32 8-32 10-32 10-32 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 5/16-24 5/16-24 5/16-24 5/16-24 5/16-24 5/16-24

Width 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 13/32 13/32 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 5/8 5/8

Part No. 34337 34338 34339 34340 34341 34342 34343 34344 34345 34346 34347 34348 34349 34350 34351 34352 34353 34354 34355 34356 34357 34358 34359 34360 34361 34362 34363 34364 34365 34366

Price /Each $2.92 2.62 2.33 2.38 2.46 2.65 2.73 3.45 3.39 3.94 3.75 6.15 4.65 5.45 4.66 5.93 5.23 5.33 5.45 6.30 6.15 6.15 6.55 9.62 11.89 13.55 11.84 14.25 12.66 12.67

Pkg. Qty. 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5

Split - Recessed Screw - Two Piece Stainless Steel

Split - Recessed Screw - One Piece Stainless Steel

Bore 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-3/16 1-1/4 1-7/16 1-1/2 1-15/16 2

Bore 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-7/8 1-15/16 2

Part No. 34415 34416 34417 34418 34419 34420 34421 34422 34423 34425 34426 34427 34428 34429 34430 34432 34433 34436 34437

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price /Each $6.89 6.89 6.22 6.26 6.89 8.72 8.11 10.95 10.75 13.55 15.95 13.99 19.22 19.36 17.65 23.39 23.25 49.98 47.65

Bore 1/4 5/16 3/8 7/16 1/2 5/8 11/16 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-7/16 1-1/2 1-5/8 1-7/8 1-15/16 2

O.D. 13/16 13/16 1-1/16 1-1/16 1-1/4 1-1/2 1-1/2 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-3/8 2-1/2 3 3-1/4 3-1/4 3-1/4

Width 1/4 1/4 5/16 5/16 3/8 13/32 13/32 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8

Set Screw Size 4-40 4-40 6-32 6-32 8-32 10-32 10-32 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 5/16-24 5/16-24 5/16-24 5/16-24

Part No. 34440 34441 34442 34443 34444 34446 34447 34448 34449 34450 34451 34453 0404407 34455 34456 0404409 34458 34459 34460

Price /Each $7.24 7.95 7.98 9.68 9.70 12.43 16.99 15.15 16.39 16.91 20.75 19.79 26.99 22.23 25.06 58.58 52.63 48.77 48.77

10-145 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_97-146.qxd

3/11/07

2:51 PM

Page 146

METRIC SHAFT COLLARS & SET SCREW COUPLINGS Shaft Collars Cont.

Metric - Split - One Piece Black Oxide Steel

Power Drive

Split - Recessed Screw - Two Piece Black Oxide Steel

Bore 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8

O.D. 13/16 13/16 13/16 13/16 1-1/16 1-1/16 1-1/4 1-1/4 1-1/2 1-1/2 1-3/4 1-3/4 1-7/8

Width 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 13/32 13/32 1/2 1/2 1/2

Set Screw Size 4-40 4-40 4-40 4-40 6-32 6-32 8-32 8-32 10-32 10-32 1/4-28 1/4-28 1/4-28

Part No. 34376 34377 34378 34379 34380 34381 34382 34383 34384 34385 34386 34387 34388

Pkg. Qty. 20 20 20 20 20 20 20 20 20 20 20 20 20

Price /Each $6.15 5.19 4.82 4.94 4.97 5.22 4.92 5.54 5.55 5.79 5.87 7.23 6.85

15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-7/8 1-15/16 2

1-7/8 2 2 2-1/8 2-1/8 2-1/4 2-1/4 2-3/8 2-3/8 2-1/2 2-1/2 3 3 3 3-1/4 3-1/4 3-1/4

1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 5/8 5/8

1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 5/16-24 5/16-24 5/16-24 5/16-24 5/16-24 5/16-24

34389 34390 34391 34392 34393 34394 34395 34396 34397 34398 34399 34400 34401 34402 34403 34404 34405

20 20 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5

7.76 6.62 7.23 7.37 7.37 7.52 8.91 8.78 8.78 8.91 10.65 13.79 14.47 12.98 16.25 14.33 14.33

O.D. 8 10 12 16 20 22 25 25 28 32 32 36 40 45 50 56 60 78

Width 5 6 8 8 10 12 12 12 12 14 14 14 16 16 16 16 18 18

Set Screw Size M2 X 2.5 M3X3 M4X4 M4X4 M5X5 M6X6 M6X6 M6X6 M6X6 M6X6 M6X6 M6X6 M8X8 M8X8 M8X8 M 8 X 10 M 10 X 10 M 10 X 10

Part No. 0403080 0403081 0403082 0403083 0403084 0403085 0403086 0403087 0403088 0403089 0403090 0403091 0403092 0403094 0403095 0403097 0403100 0403102

Pkg. Qty. 100 100 100 100 50 50 50 50 50 50 25 25 25 25 25 25 10 5

Price /Each $1.62 1.62 1.62 1.76 1.93 2.22 2.46 2.46 2.49 2.79 2.94 2.94 3.45 3.93 4.32 4.98 6.85 11.70

O.D. may be to the nearest inch equivalent. Some sizes available in stainless steel.

10-146 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

O.D. 16 16 18 18 24 24 24 28 30 30 34 34 36 36 40

Width 9 9 9 9 9 9 9 11 11 11 13 13 13 13 15

Set Screw Size M3X8 M3X8 M3X8 M3X8 M 3 X 10 M 3 X 10 M 3 X 10 M 4 X 12 M 4 X 12 M 4 X 12 M 5 X 16 M 5 X 16 M 5 X 16 M 5 X 16 M 6 X 16

Part No. 0403002 0403003 0403004 0403005 0403006 0403007 0403008 0403009 0403010 0403011 0403012 0403013 0403014 0403015 0403016

Pkg. Qty. 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50

Price /Each $3.42 3.46 3.42 3.42 3.42 3.78 3.57 4.12 4.12 4.66 4.26 4.32 4.82 4.66 4.98

20 21 22 23 25 26 30 35 36 40 42 45 50 60 70 75

40 42 42 45 45 48 54 57 57 60 73 73 78 88 98 103

15 15 15 15 15 15 15 15 15 15 19 19 19 19 19 19

M 6 X 16 M 6 X 16 M 6 X 16 M 6 X 16 M 6 X 16 M 6 X 16 M 6 X 16 M 6 X 16 M 6 X 16 M 6 X 16 M 8 X 25 M 8 X 25 M 8 X 25 M 8 X 25 M 8 X 25 M 8 X 25

0403017 0403018 0403019 0403020 0403021 0403022 0403023 0403024 0403025 0403026 0403027 0403028 0403030 0403033 0403034 0403035

50 50 25 25 25 25 25 25 25 25 10 10 5 5 5 5

5.15 5.33 5.33 5.55 5.55 7.37 7.37 7.99 9.29 9.29 15.25 15.25 18.55 22.95 34.38 37.15

O.D. may be to the nearest inch equivalent. Some sizes available in Stainless Steel.

Solid Set Screw Couplings - Black Oxide Steel

Metric - Solid - Black Oxide Steel

Bore 4 5 6 8 10 12 14 15 16 18 20 22 25 30 32 35 40 50

Bore 4 5 6 7 8 9 10 12 13 14 15 16 17 18 19

Bore 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2

O.D. 1/2 5/8 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/8 2-1/4 2-1/2 2-1/2

Width 3/4 1 1 1-1/2 2 2 2 3 3 4 4-1/2 4-1/2

Set Screw Size 10-32 10-32 1/4-20 1/4-20 5-16-18 5/16-18 5/16-18 5/16-18 3/8-16 3/8-16 3/8-16 3/8-16

Part No. 0403173 0403174 0403175 0403176 0403177 0403178 0403179 0403180 0403181 0403182 0403183 0403184

Pkg. Qty. 20 20 20 5 5 5 5 2 2 2 1 1

Price /Each $5.99 6.85 7.40 8.45 10.98 12.53 16.25 18.55 23.49 28.22 39.55 60.25

10_pHyd_147-192.qxd

3/11/07

2:54 PM

Page 147

Shaft Collars Cont.

Metric - Split - Two Piece Black Oxide Steel

Bore 4 5 6 8 10 12 13 14 15 16 17 18 20 22 24 25 26 28 30 32 34 35 36 38

O.D. 16 16 18 24 24 28 30 30 34 34 36 36 40 42 45 45 48

Width 9 9 9 9 9 11 11 11 13 13 13 13 15 15 15 15 15

Set Screw Size M3X8 M3X8 M3X8 M 3 X 10 M 3 X 10 M 4 X 12 M 4 X 12 M 4 X 12 M 5 X 16 M 5 X 16 M 5 X 16 M 5 X 16 M 6 X 16 M 6 X 16 M 6 X 16 M 6 X 16 M 6 X 16

Part No. 0403038 0403039 0403040 0403042 0403044 0403045 0403046 0403047 0403048 0403049 0403050 0403051 0403052 0403054 0403055 0403056 0403057

Pkg. Qty. 100 100 100 100 50 50 50 50 50 50 50 50 50 25 25 25 25

Price /Each $6.56 6.56 6.56 6.56 6.85 6.85 7.23 7.23 7.55 7.55 7.76 7.90 7.90 8.15 8.62 8.38 9.29

48 54 54 57 57 57 60

15 15 15 15 15 15 15

M 6 X 16 M 6 X 16 M 6 X 16 M 6 X 16 M 6 X 16 M 6 X 16 M 6 X 16

0403058 0403059 0403060 0403061 0403062 0403063 0403064

25 25 25 25 25 25 25

9.61 9.98 9.98 11.48 11.48 11.48 12.37

Bore 40 42 45 48 50 54 55 60 65 70 75 80

O.D. 60 73 73 78 78 82 82 88 93 98 103 108

Set Screw Size M 6 X 16 M 8 X 25 M 8 X 25 M 8 X 25 M 8 X 25 M 8 X 25 M 8 X 25 M 8 X 25 M 8 X 25 M 8 X 25 M 8 X 25 M 8 X 25

Width 15 19 19 19 19 19 19 19 19 19 19 19

Part No. 0403065 0403066 0403067 0403068 0403069 0403070 0403071 0403072 0403073 0403074 0403075 0403076

Pkg. Qty. 25 10 10 10 5 5 5 5 5 5 5 5

Price /Each $12.39 18.21 19.22 20.62 22.36 26.20 26.20 27.50 42.98 42.14 48.12 62.36

Split - One Piece Clamping Couplings - Black Oxide Steel

Bore 1/4 x1/4 3/8 x3/8 1/2 x3/8 1/2 x1/2 5/8 x1/2 5/8 x5/8 3/4 x3/4 7/8 x7/8 1 x1/2 1x1 1-1/4 x 1-1/4

O.D. 11/16 7/8 1-1/8 1-1/8 1-5/16 1-5/16 1-1/2 1-5/8 1-3/4 1-3/4 2-1/16

Width 1-1/8 1-3/8 1-3/4 1-3/4 2 2 2-1/4 2-1/2 3 3 3-1/4

Set Screw Size 4-40 6-32 8-32 8-32 10-32 10-32 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28

Part No. 0403128 0403130 0403131 0403132 0403133 0403134 0403135 0403136 0403137 0403138 0403139

Pkg. Qty. 10 5 5 5 5 5 5 5 2 2 2

Price /Each $15.47 18.93 23.98 19.73 25.78 25.78 28.67 33.52 41.24 31.22 42.15

O.D. may be to the nearest inch equivalent. Some sizes available in stainless steel.

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

10-147 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Power Drive

CLAMPING COUPLINGS & SHAFT COLLARS

10_pHyd_147-192.qxd

3/11/07

2:54 PM

Page 148

SHAFT COLLARS & JAW COUPLINGS Shaft Collar Kit

Shaft Collars Cont.

Use in conjunction with Insert card #99370 and drawer (not included)

Power Drive

No Flange Self-Centering Keyless Locking Assembly • Medium-High Torque • Economical - Quick Installation - Compact Size • Self-Centering Keyless Lock Assembly no Flange Part No. 0403600 0403602 0403604 0403606 0403607 0403610 0403611 0403931 0403937 0403938

Vendor No. C123E-075 C123E-100 C123E-125 C123E-143 C123E-150 C123E-193 C123E-200 C123E-243 C123E-293 C123E-300

I.D. 0.75" 1" 1.125" 1.437" 1.5" 1.937" 2v 2.437" 2.937" 3.00"

Part No. 99369

O.D. 1.85" 1.969" 2.362" 2.559" 2.559" 3.15" 3.15" 3,74" 4.528" 4.724"

Price /Each $39.42 43.22 49.70 50.66 50.85 61.24 61.40 81.75 132.74 133.12

Flanged Self-Centering Keyless Locking Assembly • Medium-High Torque • Economical - Quick Installation - Compact Size • Self-Centering Keyless Lock Assembly with Flange Part No. 0403622 0403624 0403626 0403628 0403629 0403632 0403633 0403978 0403984 0403985

Vendor No. C133E-075 C133E-100 C133E-125 C133E-143 C133E-150 C133E-193 C133E-200 C133E-243 C133E-293 C133E-300

I.D. 0.75" 1" 1.125" 1.437" 1.5" 1.937" 2" 2.437" 2.937" 3.00"

O.D. 1.85" 1.969" 2.362" 2.559" 2.559" 3.15" 3.15" 3.74" 4.528" 4.724"

Price /Each $38.33 41.32 46.70 47.99 48.44 58.82 58.94 82.32 130.62 130.85

Self-Centering Keyless Locking Assembly • Very high torque • Compact size • Excellent for bulk handling applications such as drum pulleys • Ideal for component to shaft connections Part No. 0403666 0403670 0403672 0403673 0403674 0403678 0403679 0404188 0404190 0404191 0404195 0404196 0404200 0404201

Vendor No. C405E-100 C405E-150 C405E-175 C405E-193 C405E-200 C405E-243 C405E-250 C405E-275 C405E-293 C405E-300 C405E-343 C405E-350 C405E-393 C405E-400

I.D. 1" 1.5" 1.75" 1.937" 2" 2.437" 2.5" 2.75" 2.937" 3.00" 3.437" 3.50" 3.937" 4.000"

10-148 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

O.D. 2.165" 2.953" 2.953" 3.15" 3.15" 3.74" 3.74" 4.331" 4.724" 4.724" 5.118" 5.118" 5.709" 5.709"

Price /Each $91.40 137.09 152.67 170.65 162.18 192.50 192.50 271.38 283.50 295.37 326.69 326.69 417.95 510.94

Description 48 pieces; assorted sizes from1/4 to 2, 2-piece double split

Price /Each $299.94

Power Transmission Couplings and Accessories

3 Piece Flexible Jaw Couplings (L Type) • Coupling assemblies consist of 3 pieces, 2 jaws, and 1 insert (spider) • Fail-safe - will still perform if elastomer fails • No metal to metal contact • Resistant to oil, dirt, sand, moisture, and grease • The Jaw Type couplings from Lovejoy are offered in the industry's largest variety of stock bore/keyway combinations • These couplings require no lubrication and provide highly reliable service for light, medium, and heavy duty electrical motor and internal combustion power transmission applications Coupling Hubs • Gray sintered iron (L050 to L150) • Cast iron construction (L190) • Note: For complete assembly order 2 hubs and 1 insert (spider) Part No. 0439450 0439451 0439452 0439454 0439469 0439471 0439484 0439485 0439500 0439501 0439508 0439509 0439510 0439511 0439526 0439529 0439533

Vendor No. 68514410206 68514410207 68514410208 68514410210 68514410420 68514410424 68514410688 68514410690 68514410771 68514410773 68514411085 68514411087 68514411089 68514411091 68514411338 68514411344 68514411512

Style L050 L050 L050 L050 L070 L070 L075 L075 L090 L090 L095 L095 L095 L095 L099 L099 L100

Bore Size 1/4" 5/16" 3/8" 1/2" 1/2" 5/8" 5/8" 3/4" 5/8" 3/4" 5/8" 3/4" 7/8" 1" 3/4" 1-1/8" 3/4"

Description No Keyway No Keyway No Keyway No Keyway No Keyway 3/16 x 3/32 Keyway 3/16 x 3/32 Keyway 3/16 x 3/32 Keyway 3/16 x 3/32 Keyway 3/16 x 3/32 Keyway 3/16 x 3/32 Keyway 3/16 x 3/32 Keyway 3/16 x 3/32 Keyway 1/4 x 1/8 Keyway 3/16 x 3/32 Keyway 1/4 x 1/8 Keyway 3/16 x 3/32 Keyway

Price /Ea $3.26 3.26 3.26 3.26 5.06 5.06 5.82 5.82 8.93 8.93 13.74 13.74 13.74 13.74 17.35 17.35 25.68

0439536 0439537 0439539 0439549 0439552 0439553 0439555 0439558 0439567 0439568 0439570 0439572 0439573 0439578 0439579

68514411516 68514411518 68514411522 68514411735 68514411739 68514411741 68514411745 68514411749 68514412107 68514412109 68514412113 68514412117 68514412119 68514412301 68514412305

L100 L100 L100 L110 L110 L110 L110 L110 L150 L150 L150 L150 L150 L190 L190

1" 1-1/8" 1-3/8" 3/4" 1" 1-1/8" 1-3/8" 1-5/8" 1" 1-1/8" 1-3/8" 1-5/8" 1-3/4" 1-7/8" 2-1/8"

1/4 x 1/8 Keyway 1/4 x 1/8 Keyway 5/16 x 5/32 Keyway 3/16 x 3/32 Keyway 1/4 x 1/8 Keyway 1/4 x 1/8 Keyway 5/16 x 5/32 Keyway 3/8 x 3/16 Keyway 1/4 x 1/8 Keyway 1/4 x 1/8 Keyway 5/16 x 5/32 Keyway 3/8 x 3/16 Keyway 3/8 x 3/16 Keyway 1/2 x 1/4 Keyway 1/2 x 1/4 Keyway

25.68 25.68 25.68 35.11 35.11 35.11 35.11 35.11 44.94 44.94 44.94 44.94 44.94 70.23 70.23

10_pHyd_147-192.qxd

3/11/07

2:54 PM

Page 149

COUPLING INSERTS & UNIVERSAL JOINTS Jaw In-Shear Coupling Inserts (Spiders) and Rings

Hytrel Inserts (Spiders) • Flexible elastomer designed for higher torque and wider temperature range • Excellent resistance to oil and chemicals • Temperature range -60° to 250°F • Shore Hardness: 55D • Color: Tan • Use in conjunction with 2 hubs for complete assembly

• New design saves time and maintenance costs • Allows insert to be replaced without moving either hub • Use one ring plus one insert in place of standard spider • Blue urethane insert material has a shore hardness of 50D and a maximum temperature rating of 200°F • Retaining ring is made from #347 cast stainless steel • Use one insert and one ring in conjunction with two hubs for complete assembly

Buna-N Inserts (Spiders) • Made of long life Buna-N rubber • Flexible and oil resistant • Temperature Range -40° to 212°F • Shore Hardness: 80A • Color: Black • Use in conjunction with 2 hubs for complete assembly

Part No. 0439446 0439459 0439475 0439490 0439515 0439540 0439559 0439575

Vendor No.

Style

Part No. 0439463 0439478 0439493 0439518 0439543 0439561 0439576

Vendor No. Style Torque 68514425308 L070 114 inch-Lbs. 68514425309 L075 227 inch-Lbs. 68514425310 L090/095 401/561 inch-Lbs. 68514411486 L099/100 792/1134 inch-Lbs. 68514411717 L110 2268 inch-Lbs. 68514411993 L150 3708 inch-Lbs. 68514412265 L190 4680 inch-Lbs.

Price /Ea

Torque

68514410194 L050 26 inch-Lbs. 68514410406 L070 43 inch-Lbs. 68514410621 L075 90 inch-Lbs. 68514411070 L090/095 144/194 inch-Lbs. 68514411494 L099/100 318/417 inch-Lbs. 68514411724 L110 792 inch-Lbs. 68514412001 L150 1240 inch-Lbs. 68514412274 L190 1728 inch-Lbs.

Price /Ea $9.98 15.05 20.06 47.75 57.78 69.42 81.86

Vendor Max. Price Part No. No. Style O.D. Torque Desc. /Ea 0439495 68514471706 L090/095 2.11 670 Insert$31.85 0439496 0439521 0439522 0439546 0439547 0439564 0439563

$2.11 3.01 5.12 6.62 13.94 16.05 23.07 28.09

68514471679 L090/095 2.11 Ring 26.58 68514471707 L099/100 2.54 1110 Insert 39.88 68514471680 L099/100 2.54 Ring 33.25 68514471708 L110 3.32 2180 Insert 51.16 68514471681 L110 3.32 Ring 45.15 68514471709 L150 3.75 3620 Insert 75.74 68514471682 L150 3.75 Ring 67.22

Flexible Universal Joint (D-Type) • Industry standard • Pin & Block design • Boot retaining grooves standard • Industrial universal joint product line is well established and provides you with a wide range of standard and specialized products • The shape of the yoke is a special feature which results in exceptionally high strength, yet allows full, free movement of the joint - which accounts for the high horsepower capacity at high speeds Flexible Universal Joints Part No. 0439585 0439587 0439589 0439598 0439602 0439608 0439609

Vendor No. 68514415744 68514415809 68514415866 68514416289 68514416363 68514416431 68514416479

Size D-4 D-6 D-8 D-4B D-6B D-7B D-8B

Type Solid Solid Solid Bored Bored Bored Bored

Bore Size – – – 3/8" 1/2" 9/16" 5/8"

O.D. 3/4" 1" 1-1/4" 3/4" 1" 1-1/8" 1-1/4"

Breaking Price Strength /Ea 768 inch-Lbs. $48.96 1560 inch-Lbs. 67.73 5220 inch-Lbs. 89.98 768 inch-Lbs. 54.54 1560 inch-Lbs. 74.97 2880 inch-Lbs. 91.98 5220 inch-Lbs. 99.95

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Keystock available on page 15-24.

10-149 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Power Drive

Power Transmission Couplings and Accessories Cont.

10_pHyd_147-192.qxd

3/11/07

2:55 PM

Page 150

COUPLINGS & ACCESS. & POWDER METAL BEARINGS Power Transmission Couplings and Accessories Cont.

Powder Metal Bearings

Power Drive

Powder Metal Bronze Flange Bearings • Superior strength • Reduced coefficient of friction • Uniform oil coating of the shaft during operation • Oil impregnated

S-Flex Coupling Flanges • Easy to Install and maintenance free • No Lubrication • Dampens Vibration and Controls Shock • Torsionally Soft • Double Engagement • The simple design of the S-Flex coupling ensures ease of assembly and reliable performance. • No special tools are needed for installation or removal. S-Flex couplings can be used in a wide variety of applications • Use 2 coupling flanges in conjunction with JE or H insert for a complete assembly Part No. 0439665 0439666 0439674 0439675 0439686 0439689 0439684 0439715 0439716 0439735 0439738 0439755 0439757 0439758

Vendor No. 68514436047 68514436048 68514436052 68514436053 68514436059 68514436060 68514436062 68514436097 68514436099 68514436126 68514436129 68514436142 68514436145 68514436146

Size 3J 3J 4J 4J 5J 5J 5J 6S 6S 7S 7S 8S 8S 8S

Style J J J J J J J S S S S S S S

Bore Size 1/2" 5/8" 5/8" 3/4" 3/4" 7/8" 1" 1" 1-1/8" 1-3/8" 1-5/8" 1-1/2" 1-3/4" 1-7/8"

Description 1/8 x 1/16 3/16 x 3/32 3/16 x 3/32 3/16 x 3/32 3/16 x 3/32 3/16 x 3/32 1/4 x 1/8 1/4 x 1/8 1/4 x 1/8 5/16 x 5/32 3/8 x 3/16 3/8 x 3/16 3/8 x 3/16 1/2 x 1/4

Material Zinc Alloy Zinc Alloy Zinc Alloy Zinc Alloy Cast Iron Cast Iron Cast Iron Cast Iron Cast Iron Cast Iron Cast Iron Cast Iron Cast Iron Cast Iron

Price /Ea $7.38 7.38 9.35 9.35 14.76 14.76 14.76 25.59 25.59 29.52 29.52 39.37 39.37 39.37

S-Flex JE Series Inserts • One piece solid EPDM rubber • Can be used with “J” or “S” style flanges • Use in conjunction with 2 S-Flex coupling flanges for a complete assembly

Part No. 0439661 0439668 0439678 0439695 0439721 0439740

Vendor No. 68514436384 68514435359 68514435350 68514435569 68514435570 68514435572

Style 3JE 4JE 5JE 6JE 7JE 8JE

Torque 60 inch-Lbs. 120 inch-Lbs. 240 inch-Lbs. 450 inch-Lbs. 725 inch-Lbs. 1135 inch-Lbs.

Max. RPM 9200 7600 7600 6000 5250 4500

Price /Ea $4.13 5.90 11.81 19.68 25.59 33.46

Max. RPM 6000 5250 4500

Price /Ea $78.73 114.16 124.00

S-Flex “H” Series Inserts • One piece molded Hytrel • Designed for high torque application • Caution: should only be used with “S” style flanges • Use in conjunction with 2 S-Flex coupling flanges for a complete assembly Part No. 0439701 0439726 0439746

Vendor No. 68514440738 68514436848 68514436514

Style 6H 7H 8H

Torque 1800 inch-Lbs. 2875 inch-Lbs. 4530 inch-Lbs.

10-150 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 0435169 0435170 0435171 0435174 0435175 0435176 0435184 0435191 0435193 0435194 0435195 0435196 0435197 0435200 0435204

Vendor No. SF-610-3 SF-610-4 SF-610-5 SF-812-3 SF-812-4 SF-812-5 SF-1014-6 SF-1216-4 SF-1216-6 SF-1216-8 SF-1216-10 SF-1216-12 SF-1216-16 SF-1220-8 SF-1418-8

ID 0.1895 0.1895 0.1895 0.2520 0.2520 0.2520 0.3150 0.3770 0.3770 0.3770 0.3770 0.3770 0.3770 0.3770 0.4390

OD 0.3140 0.3140 0.3140 0.3770 0.3770 0.3770 0.4400 0.5020 0.5020 0.5020 0.5020 0.5020 0.5020 0.6270 0.5650

Length 3/16 1/4 5/16 3/16 1/4 5/16 3/8 1/4 3/8 1/2 5/8 3/4 1 1/2 1/2

Flange OD 7/16 7/16 7/16 15/32 15/32 15/32 9/16 5/8 5/8 5/8 5/8 5/8 5/8 7/8 11/16

Flange Thickness 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16

0435211 0435213 0435215 0435217 0435226 0435227 0435228 0435233 0435234 0435243 0435249 0435250 0435258 0435253 0435261 0435276 0435277

SF-1620-4 SF-1620-8 SF-1620-10 SF-1620-12 SF-1624-8 SF-1624-10 SF-1624-12 SF-2024-10 SF-2024-12 SF-2028-10 SF-2428-8 SF-2428-12 SF-2432-8 SF-2430-12 SF-2432-16 SF-3240-12 SF-3240-16

0.5020 0.5020 0.5020 0.5020 0.5020 0.5020 0.5020 0.6270 0.6270 0.6280 0.7530 0.7530 0.7530 0.7530 0.7530 1.0030 1.0030

0.6270 0.6270 0.6270 0.6270 0.7530 0.7530 0.7530 0.7530 0.7530 0.8780 0.8780 0.8780 1.0030 0.9400 1.0030 1.2530 1.2530

1/4 1/2 5/8 3/4 1/2 5/8 3/4 5/8 3/4 5/8 1/2 3/4 1/2 3/4 1 3/4 1

7/8 7/8 7/8 7/8 15/16 15/16 15/16 1 1 1 1-1/8 1-1/8 1-1/8 1-1/4 1-1/8 1-5/8 1-5/8

1/16 1/16 1/16 1/16 1/8 1/8 1/8 3/32 3/32 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8

0.58 0.75 0.94 1.05 1.29 1.59 1.75 0.97 1.15 1.62 0.99 1.57 1.72 2.09 2.35 3.17 3.91

0435278 0435290 0435293

SF-3240-20 SF-4048-8 SF-4048-20

1.0030 1.2520 1.2520

1.2530 1.5030 1.5030

1-1/4 1/2 1-1/4

1-5/8 1-11/16 1-11/16

1/8 1/8 1/8

4.65 2.59 4.90

Over 150 additional flange bearing sizes available from inventory

Price /Each $0.35 0.35 0.37 0.34 0.36 0.39 0.45 0.45 0.52 0.55 0.74 0.78 0.84 0.97 0.75

10_pHyd_147-192.qxd

3/11/07

2:55 PM

Page 151

POWDER METAL BEARINGS

Powder Metal Bronze Sleeve Bearings • Superior strength • Reduced coefficient of friction • Uniform oil coating of the shaft during operation • Oil impregnated Part No. 0434593 0434602 0434607 0434610 0434620 0434621 0434622 0434624 0434629 0434639 0434646 0434648 0434655 0434657 0434663

Vendor No. SS-46-4 SS-68-4 SS-610-4 SS-610-10 SS-810-12 SS-812-4 SS-812-6 SS-812-10 SS-814-6 SS-1012-4 SS-1014-4 SS-1014-8 SS-1016-6 SS-1016-10 SS-1214-8

ID 0.1270 0.1890 0.1900 0.1900 0.2520 0.2520 0.2520 0.2520 0.2520 0.3145 0.3145 0.3145 0.3145 0.3145 0.3770

OD 0.1895 0.2520 0.3145 0.3145 0.3150 0.3770 0.3770 0.3770 0.4390 0.3780 0.4400 0.4400 0.5030 0.5030 0.4400

0434667 0434668 0434669 0434670 0434671 0434673 0434675 0434678 0434683 0434688 0434692 0434696 0434697 0434704 0434714 0434715 0434716 0434717 0434719 0434720 0434725 0434734 0434737 0434746 0434754 0434760 0434763 0434772 0434774 0434776 0434782 0434788 0434792 0434807 0434810 0434816 0434817 0434818 0434829 0434837 0434838 0434839 0434841 0434844 0434849 0434858 0434868 0434878

SS-1216-4 SS-1216-6 SS-1216-8 SS-1216-10 SS-1216-12 SS-1216-16 SS-1216-20 SS-1218-10 SS-1220-6 SS-1220-16 SS-1224-8 SS-1418-6 SS-1418-8 SS-1420-8 SS-1620-6 SS-1620-8 SS-1620-10 SS-1620-12 SS-1620-16 SS-1620-18 SS-1622-12 SS-1624-12 SS-1624-18 SS-1628-8 SS-1632-16 SS-1822-20 SS-1824-12 SS-2024-8 SS-2024-12 SS-2024-16 SS-2026-12 SS-2028-8 SS-2028-16 SS-2032-24 SS-2228-12 SS-2428-8 SS-2428-10 SS-2428-12 SS-2430-16 SS-2432-8 SS-2432-10 SS-2432-12 SS-2432-16 SS-2432-24 SS-2436-12 SS-2440-24 SS-2832-12 SS-2836-16

0.3780 0.3780 0.3780 0.3780 0.3780 0.3780 0.3780 0.3780 0.3780 0.3780 0.3780 0.4400 0.4400 0.4400 0.5020 0.5020 0.5020 0.5020 0.5020 0.5020 0.5030 0.5030 0.5030 0.5030 0.5030 0.5650 0.5650 0.6280 0.6280 0.6280 0.6280 0.6280 0.6280 0.6280 0.6900 0.7530 0.7530 0.7530 0.7530 0.7530 0.7530 0.7530 0.7530 0.7530 0.7530 0.7530 0.8780 0.8780

0.5030 0.5030 0.5030 0.5030 0.5030 0.5030 0.5030 0.5650 0.6280 0.6280 0.7530 0.5650 0.5650 0.6280 0.6280 0.6280 0.6280 0.6280 0.6280 0.6280 0.6900 0.7530 0.7530 0.8780 1.0040 0.6900 0.7530 0.7530 0.7530 0.7530 0.8150 0.8780 0.8780 1.0030 0.8780 0.8780 0.8780 0.8780 0.9410 1.0030 1.0030 1.0030 1.0030 1.0030 1.1280 1.2530 1.0030 1.1280

Price LG /Each 1/4 $0.29 1/4 0.29 1/4 0.31 5/8 0.46 3/4 0.62 1/4 0.31 3/8 0.40 5/8 0.52 3/8 0.47 1/4 0.39 1/4 0.36 1/2 0.47 3/8 0.47 5/8 0.71 1/2 0.46 1/4 3/8 1/2 5/8 3/4 1 1-1/4 5/8 3/8 1 1/2 3/8 1/2 1/2 3/8 1/2 5/8 3/4 1 1-1/8 3/4 3/4 1-1/8 1/2 1 1-1/4 3/4 1/2 3/4 1 3/4 1/2 1 1-1/2 3/4 1/2 5/8 3/4 1 1/2 5/8 3/4 1 1-1/2 3/4 1-1/2 3/4 1

0.37 0.44 0.52 0.55 0.64 0.82 1.07 1.06 0.64 1.54 1.34 0.53 0.61 0.84 0.50 0.58 0.69 0.82 0.96 1.11 1.13 1.45 1.99 1.59 4.04 1.46 1.23 0.68 0.90 1.08 1.40 1.24 2.11 5.00 1.35 0.73 0.94 1.04 1.87 1.39 1.69 1.69 2.21 3.43 3.20 7.65 1.30 2.71

Powder Metal Bronze Sleeve Bearings Cont. Part No. Vendor No. 0434889 SS-2840-16 0434905 SS-3236-16 0434911 SS-3238-16 0434919 SS-3240-16 0434936 SS-3244-16 0434954 SS-3640-20 0434961 SS-3644-12 0434970 SS-3648-20 0434991 SS-4048-16 0434995 SS-4048-24 0435008 SS-4052-24 0435013 SS-4056-24 0435029 SS-4452-24 0435033 SS-4456-16 0435039 SS-4652-24 0435054 SS-4856-24 0435059 SS-4856-48 0435065 SS-4860-24 0435072 SS-4864-32 0435081 SS-5260-40 0435093 SS-5664-16 0435101 SS-5668-24 0435110 SS-6472-24 0435119 SS-6476-48 0435124 SS-6480-32 0435129 SS-7284-32 0435137 SS-8088-32 0435144 SS-8096-32 0435150 SS-88104-48 0435154 SS-96104-48 0435155 SS-96112-32 0435163 SS-128144-64 0435166 SS-144168-80 0435168 SS-160184-32

ID 0.8780 1.0040 1.0040 1.0040 1.0040 1.1290 1.1290 1.1290 1.2540 1.2540 1.2540 1.2540 1.3790 1.3790 1.4420 1.5040 1.5040 1.5040 1.5040 1.6290 1.7540 1.7540 2.0040 2.0040 2.0040 2.2540 2.5040 2.5040 2.7540 3.0050 3.0050 4.0035 4.5040 5.0040

OD 1.2530 1.1280 1.1900 1.2540 1.3790 1.2540 1.3790 1.5040 1.5040 1.5040 1.6290 1.7540 1.6290 1.7540 1.6290 1.7540 1.7540 1.8790 2.0040 1.8790 2.0040 2.1290 2.2540 2.3800 2.5050 2.6300 2.7540 3.0050 3.2550 3.2550 3.5050 4.5040 5.2545 5.7550

Price LG /Each 1 $4.29 1 1.90 1 2.89 1 3.05 1 4.74 1-1/4 2.53 3/4 3.17 1-1/4 6.34 1 3.65 1-1/2 5.26 1-1/2 8.19 1-1/2 12.00 1-1/2 5.85 1 6.95 1-1/2 4.69 1-1/2 6.28 3 12.95 1-1/2 10.44 2 18.22 2-1/2 12.65 1 5.15 1-1/2 13.22 1-1/2 8.85 3 27.34 2 23.82 2 21.25 2 14.00 2 29.33 3 46.54 3 25.62 2 34.33 4 89.20 5 204.00 2 85.98

Powder Metal Bronze Thrust Bearings • Superior strength • Reduced coefficient of friction • Uniform oil coating on both surfaces during operation • Oil impregnated

Part No. Vendor No. 0435460 ST-816-2 0435461 ST-820-2 0435462 ST-1020-2 0435464 ST-1220-2 0435466 ST-1224-2 0435470 ST-1624-2 0435472 ST-1632-2 0435473 ST-1632-3 0435474 ST-1632-4 0435478 ST-2032-4 0435483 ST-2040-4 0435486 ST-2440-2 0435488 ST-2444-2 0435491 ST-2450-3

ID 0.2550 0.2550 0.3150 0.3850 0.3800 0.5050 0.5100 0.5100 0.5100 0.6280 0.6280 0.7530 0.7530 0.7650

Price OD Thickness /Each 0.5000 1/16 $0.27 0.6250 1/16 0.35 0.6250 1/16 0.30 0.6250 1/16 0.37 0.7500 1/16 0.37 0.7500 1/16 0.34 1.0000 1/16 0.51 1.0000 3/32 0.58 1.0000 1/8 0.72 1.0000 1/8 0.64 1.2500 1/8 1.01 1.2500 1/16 0.60 1.3750 1/16 0.68 1.5625 3/32 1.34

0435494 0435498 0435504 0435505 0435513 0435520 0435525 0435528

0.8905 1.0030 1.0120 1.0160 1.2650 1.5050 1.9530 2.0110

1.5000 1.5000 1.7500 2.0000 2.0000 2.5050 2.6250 3.0000

ST-2848-4 ST-3248-4 ST-3256-4 ST-3264-4 ST-4064-4 ST-4880-4 ST-6284-4 ST-6496-8

1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/4

1.35 1.17 1.92 2.29 2.06 3.19 2.98 7.35

Over 600 additional sleeve bushing sizes available from inventory

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

10-151 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Power Drive

Powder Metal Bearings Cont.

10_pHyd_147-192.qxd

3/11/07

2:55 PM

Page 152

RADIAL BALL BEARINGS R-Series - Inch

Radial Ball Bearings Power Drive

For All Radial Ball Bearings: Excellent for radial load applications 30-40% grease-filled. 5200 Chrome Steel. Radial Ball Bearing Available in rubber seal (2RS) or metal shield (ZZ). The most common fit for our bearings is C3. Meets ABEC 1-9, AFBMA and ISO Standards.

Popular usages include: automotive, wheels, electric motors, tools, appliances, transmissions and generators. Note: Vendor part numbers ending in “2RS” use rubber seals. Vendor part numbers ending in “ZZ” use metal shields. Code to Diagrams: d=I.D. D=O.D. W=Width

1600 Series - Inch

Part No. 0474436 0474437 0474438 0474439 0474440 0474441 0474442 0474443 0474444 0474445 0474446 0474447 0474448 0474449 0474450 0474451 0474452 0474453 0474454 0474455 0474456 0474457 0474458 0474459 0474460 0474461 0474462 0474463

Vendor No. 1601-2RS 1601-ZZ 1602-2RS 1602-ZZ 1603-2RS 1603-ZZ 1604-2RS 1604-ZZ 1605-2RS 1605-ZZ 1606-2RS 1606-ZZ 1607-2RS 1607-ZZ 1614-2RS 1614-ZZ 1615-2RS 1615-ZZ 1616-2RS 1616-ZZ 1620-2RS 1620-ZZ 1621-2RS 1621-ZZ 1622-2RS 1622-ZZ 1623-2RS 1623-ZZ

I.D. .1875 .1875 .2500 .2500 .3125 .3125 .3750 .3750 .3125 .3125 .3750 .3750 .4375 .4375 .3750 .3750 .4375 .4375 .5000 .5000 .4375 .4375 .5000 .5000 .5625 .5625 .6250 .6250

O.D. 0.6875 0.6875 0.6875 0.6875 0.875 0.875 0.875 0.875 0.9063 0.9063 0.9063 0.9063 0.9063 0.9063 1.125 1.125 1.125 1.125 1.125 1.125 1.375 1.375 1.375 1.375 1.375 1.375 1.375 1..625

Width 0.3125 0.3125 0.3125 0.3125 0.3438 0.3438 0.3438 0.3438 0.3125 0.3125 0.3125 0.3125 0.3125 0.3125 0.375 0.375 0.375 0.375 0.375 0.375 0.4375 0.4375 0.4375 0.4375 0.4375 0.4375 0.4375 0.4375

Static Load 163 163 163 163 302 302 302 302 302 302 302 302 436 436 505 505 505 505 505 505 781 781 781 781 781 781 781 781

Dynamic Load 340 340 340 340 573 573 573 573 573 573 573 573 800 800 882 882 882 882 882 882 1323 1323 1323 1323 1323 1323 1323 1323

0474464 0474465 0474466 0474467 0474468 0474469 0474470 0474471 0474472 0474473 0474474 0474475 0474476 0474477 0474478 0474479 0474480 0474481

1628-2RS 1628-ZZ 1630-2RS 1630-ZZ 1633-2RS 1633-ZZ 1635-2RS 1635-ZZ 1638-2RS 1638-ZZ 1640-2RS 1640-ZZ 1641-2RS 1641-ZZ 1652-2RS 1652-ZZ 1654-2RS 1654-ZZ

.6250 .6250 .7500 .7500 .6250 .6250 .7500 .7500 .75 .75 .875 .875 1.0 1.0 1.1250 1.1250 1.25 1.25

1.625 1.625 1.625 1.625 1.75 1.75 1.75 1.75 2 2 2 2 2 2 2.5 2.5 2.5 2.5

0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5625 0.5625 0.5625 0.5625 0.5625 0.5625 0.625 0.625 0.625 0.625

1001 1001 1001 1001 1001 1001 1001 1001 1563 1563 1563 1563 1563 1563 1890 1890 1890 1890

1627 1627 1627 1627 1627 1627 1627 1627 2426 2426 2426 2426 2426 2426 2880 2880 2880 2880

Note: Sizes are in inches.

10-152 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Each $1.99 1.92 1.99 1.92 1.99 1.92 1.99 1.92 1.99 1.92 2.15 2.10 2.15 2.10 2.25 2.19 2.32 2.26 2.32 2.26 2.63 2.58 2.71 2.66 2.85 2.80 2.85 3.00 3.55 3.50 3.55 3.50 3.89 3.84 3.89 3.84 4.50 3.97 3.99 3.97 3.94 3.89 5.63 5.58 5.85 5.80

Part No. 0474484 0474485 0474486 0474487 0474488 0474489 0474490 0474491 0474492 0474493 0474494 0474495 0474496 0474497 0474498 0474499 0474500 0474501 0474502 0474503 0474504 0474505 0474506 0474507 0474508 0474509

Vendor No. R2-2RS R2-ZZ R3-2RS R3-ZZ R4-2RS R4-ZZ R4-A-2RS R4-A-ZZ R6-2RS R6-ZZ R8-2RS R8-ZZ R10-2RS R10-ZZ R12-2RS R12-ZZ R14-2RS R14-ZZ R16-2RS R16-ZZ R18-2RS R18-ZZ R20-2RS R20-ZZ R24-2RS R24-ZZ

I.D. 0.125 0.125 .1875 .1875 .25 .25 .25 .25 .3750 .3750 .5 .5 .625 .625 .75 .75 .875 .875 1.0 1.0 1.125 1.125 1.25 1.25 1.5 1.5

O.D. 0.375 0.375 0.5 0.5 0.625 0.625 0.75 0.75 0.875 0.875 1.125 1.125 1.375 1.375 1.625 1.625 1.875 1.875 2 2 2.125 2.125 2.25 2.25 2.625 2.625

Width 0.1562 0.1562 0.196 0.196 0.196 0.196 0.2812 0.2812 0.2812 0.2812 0.3125 0.3125 0.3438 0.3438 0.4375 0.4375 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5625 0.5625

Static Load 29 29 64 64 77 77 198 198 304 304 505 505 624 624 1000 1000 1111 1111 1222 1222 1407 1407 1960 1960 2085 2085

Dynamic Load 73 73 147 147 167 167 403 403 575 575 880 880 1036 1036 1630 1630 1740 1740 1850 1850 2150 2150 2420 2420 2906 2906

Price /Each $1.85 1.59 1.69 1.64 1.54 1.49 1.64 1.59 1.64 1.59 1.98 1.86 2.49 2.37 5.65 2.94 3.73 3.56 4.63 4.45 5.58 5.35 5.91 5.58 9.35 8.64

Note: Sizes are in inches.

6000 Extra Light Series - Metric

Part No. 0474371 0474372 0474373 0474374 0474375 0474376 0474377 0474378 0474379 0474380 0474381 0474382

Vendor No. 6000-2RS 6000-ZZ 6001-2RS 6001-ZZ 6002-2RS 6002-ZZ 6003-2RS 6003-ZZ 6004-2RS 6004-ZZ 6005-2RS 6005-ZZ

I.D. 10 10 12 12 15 15 17 17 20 20 25 25

Note: Sizes are in millimeters.

O.D. 26 26 28 28 32 32 35 35 42 42 47 47

Width 8 8 8 8 9 9 10 10 12 12 12 12

Static Load 440 440 540 540 640 640 735 735 1140 1140 1315 1315

Dynamic Load 1040 1040 1140 1140 1260 1260 1360 1360 2110 2110 2520 2520

RPM 34000 34000 32000 32000 28000 28000 24000 24000 20000 20000 18000 18000

Price /Each $1.37 1.26 2.10 1.37 1.69 1.67 2.15 1.99 2.54 2.49 3.38 3.65

10_pHyd_147-192.qxd

3/11/07

2:55 PM

Page 153

RADIAL BALL BEARINGS & TAPERED ROLLER BEARINGS Radial Ball Bearings Cont.

6200 Light Series Metric Part No. 0474383 0474384 0474385 0474386 0474387 0474388 0474389 0474390 0474391 0474392 0474393 0474394 0474395 0474396 0474397 0474398 0474399 0474400 0474401 0474402 0474403 0474404 0474405 0474406 0474407 0474408

Vendor No. 6200-2RS 6200-ZZ 6201-2RS 6201-ZZ 6202-2RS 6202-ZZ 6203-2RS 6203-ZZ 6204-2RS 6204-ZZ 6205-2RS 6205-ZZ 6206-2RS 6206-ZZ 6207-2RS 6207-ZZ 6208-2RS 6208-ZZ 6209-2RS 6209-ZZ 6210-2RS 6210-ZZ 6211-2RS 6211-ZZ 6212-2RS 6212-ZZ

I.D. 10 10 12 12 15 15 17 17 20 20 25 25 30 30 35 35 40 40 45 45 50 50 55 55 60 60

O.D. 30 30 32 32 35 35 40 40 47 47 52 52 62 62 72 72 80 80 85 85 90 90 100 100 110 110

Width 9 9 10 10 11 11 12 12 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22

Static Load 540 540 690 690 850 850 1080 1080 1500 1500 1770 1770 2540 2540 3470 3470 4000 4000 4570 4570 5240 5240 6600 6600 8140 8140

Dynamic Load 1140 1140 1550 1550 1760 1760 2150 2150 2860 2860 3150 3150 4390 4390 5740 5740 6910 6910 7470 7470 7900 7900 9810 9810 10700 10700

RPM 30000 30000 28000 28000 24000 24000 20000 20000 18000 18000 15000 15000 13000 13000 11000 11000 10000 10000 9000 9000 8500 8500 7500 7500 7000 7000

Price /Each $1.54 1.43 1.64 1.59 1.71 1.64 1.86 1.81 2.73 2.63 3.34 3.45 4.44 3.89 5.98 5.25 6.97 7.75 9.25 8.90 11.99 11.20 13.85 13.23 17.34 16.10

Part No. 0474409 0474410 0474411 0474510 0474511

Vendor No. Z9504B 99502H 499502H 608-ZZ 608-2RS

I.D. 0.7505" 0.62499" 0.62499" 8.0mm 8.0mm

O.D. 1.7803" 1.3749" 1.3749" 22mm 22mm

Width 0.6098" 0.433" 0.433" 7mm 7mm

Static Load 446 446 290 290

Dynamic Load 756 756 580 580

Price /Each $3.99 1.98 2.14 0.99 0.99

Tapered Roller Bearings

For All Tapered Roller Bearings: Ideal to support combination of radial and thrust loadslimited to low and moderate speeds. Excellent for combined axial and radial loads. 52100 chrome steel. Popular usages include: hubs, conveyors, pumps, automobiles, propeller shafts, heavyduty equipment and wheels. Code to Diagrams: d=Cone I.D. (Inside race with rollers) D=Cup O.D. (Steel ring with tapered raceway) B=Cone Width C=Cup Width T=Overall Width r=I.D. Radius

Tapered Roller Bearing

Note: Sizes are in millimeters.

6300 Medium Series - Metric

Part No. 0474412 0474413 0474414 0474415 0474416 0474417 0474418 0474419 0474420 0474421 0474422 0474423 0474424 0474425 0474426 0474427 0474428 0474429 0474430 0474431 0474432 0474433 0474434 0474435

Vendor No. 6300-2RS 6300-ZZ 6301-2RS 6301-ZZ 6302-2RS 6302-ZZ 6303-2RS 6303-ZZ 6304-2RS 6304-ZZ 6305-2RS 6305-ZZ 6306-2RS 6306-ZZ 6307-2RS 6307-ZZ 6308-2RS 6308-ZZ 6309-2RS 6309-ZZ 6310-2RS 6310-ZZ 6311-2RS 6311-ZZ

I.D. 10 10 12 12 15 15 17 17 20 20 25 25 30 30 35 35 40 40 45 45 50 50 55 55

O.D. 35 35 37 37 42 42 47 47 52 52 62 62 72 72 80 80 90 90 100 100 110 110 120 120

Width 11 11 12 12 13 13 14 14 15 15 17 17 19 19 21 21 23 23 25 25 27 27 29 29

Static Load 780 780 950 950 1250 1250 1500 1500 1760 1760 2540 2540 3380 3380 4400 4400 5400 5400 6600 6600 8600 8600 10120 10120

Dynamic Load 1810 1810 2190 2190 2570 2570 3040 3040 3580 3580 5060 5060 6320 6320 7470 7470 9230 9230 11900 11900 13900 13900 16100 16100

RPM 26000 26000 24000 24000 20000 20000 19000 19000 16000 16000 14000 14000 11000 11000 10000 10000 9000 9000 8000 8000 7500 7500 6700 6700

Price /Each $2.10 1.99 2.32 2.26 2.89 2.82 3.72 3.67 4.49 4.44 5.03 4.81 7.98 7.83 9.23 8.99 12.10 11.72 13.85 13.62 18.41 18.24 19.97 19.81

Part No. 0474513 0474520 0474522 0474523 0474524 0474525 0474526 0474529 0474530 0474532 0474533 0474534 0474537 0474540 0474544 0474545 0474547

Vendor No. 572 39520 HM212011 HM212047 HM212049 HM218210 HM218248 SET-1 LM11749/10 SET-2 LM11949/10 SET-4 L44649/10 SET-5 LM48548/10 SET-6 LM67048/10 SET-14 L44643/10 SET-17 L68149/11 SET-35 LM501349/10 SET-36 LM603049/12 SET-38 LM104949/11

Cone I.D. Cone Width I.D.Radius Cup O.D. Cup Width 5.5115 1.125 4.4375 0.9375 4.8125 1.17 2.5 1.51 0.28 2.625 1.51 0.14 5.7864 1.2795 3.5423 1.5748 0.28 .6875 0.575 0.05 1.57 0.42 .750 0.655 0.05 1.781 0.475 1.0625 0.58 0.14 1.98 0.42 1.3750 0.72 2.5625 0.55 1.25 0.66 2.328 0.465 1,000 0.58 0.05 1.98 0.42 1.3775 0.66 2.3612 0.47 1.625 0.78 0.14 2.891 0.58 1.7812 0.7812 0.14 3.0625 0.6562 2 0.875 0.14 3.25 0.65

Overall Width 0.545 0.61 0.56 0.71 0.625 0.56 0.625 0.77 0.8437 0.8313

Price /Each $10.36 7.95 8.39 18.17 17.89 13.26 28.44 4.71 4.32 4.97 6.93 5.58 4.98 5.63 9.46 9.69 12.50

Note: Sizes are in inches.

Note: Sizes are in millimeters.

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

10-153 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Power Drive

Miscellaneous Radial Ball Bearings

10_pHyd_147-192.qxd

3/11/07

2:55 PM

Page 154

MOUNTED UNITS Mounted Units

Four Bolt Flange

Power Drive

For All Mounted Units: Grease fitting - grease groove and three grease holes located along outer ring of bearing allow relubrication. Housing - one piece high tensile strength cast iron housings on standard units. Deep groove - races and large balls for higher load carrying capacity.

Xtra-Loc - set screws with special knurled ends for better shaft holding power. Self-aligning surface - allows bearing to align on a displaced shaft without distorting seals. Code to Diagrams: d=Shaft Size h=Shaft Height e=Bolt Hole Center a=Overall Length w=Overall Height (Pillow Block Only) Z=Overall Height (Four and Two Bolt Flange Only)

Pillow Block

Four Bolt Flange

Two Bolt Flange

Vendor Part No. No. Fractional Sizes 0474550 204-12 UCF 0474556 205-16 UCF 0474564 206-18 UCF 0474565 206-19 UCF 0474566 206-20 UCF 0474576 207-20 UCF 0474577 207-22 UCF 0474578 207-23 UCF 0474586 208-24 UCF 0474594 209-26 UCF 0474595 209-27 UCF 0474596 209-28 UCF 0474605 210-30 UCF 0474606 210-31 UCF 0474614 211-32 UCF 0474615 211-35 UCF Metric Sizes 0474551 204-20mm UCF 0474557 205-25mm UCF 0474567 206-30mm UCF 0474579 207-35mm UCF 0474587 208-40mm UCF 0474597 209-45mm UCF 0474607 210-50mm UCF

Shaft Size

Bolt Hole Center

Bolt Size

Overall Lgth.

Overall Ht.

Price /Each

3/4 1 1-1/8 1-3/16 1-1/4 1-1/4 1-3/8 1-7/16 1-1/2 1-5/8 1-11/16 1-3/4 1-7/8 1-15/16 2 2-3/16

2-33/64 2-3/4 3-17/64 3-17/64 3-17/64 3-5/8 3-5/8 3-5/8 4-1/64 4-9/64 4-9/64 4-9/64 4-3/8 4-3/8 5-1/8 5-1/8

3/8 3/8 3/8 3/8 3/8 7/16 7/16 7/16 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8

3-3/8 3-3/4 4-1/4 4-1/4 4-1/4 4-19/32 4-19/32 4-19/32 5-1/8 5-13/32 5-13/32 5-13/32 5-5/8 5-5/8 6-3/8 6-3/8

1-5/16 1-13/32 1-19/32 1-19/32 1-19/32 1-3/4 1-3/4 1-3/4 2-1/32 2-1/16 2-1/16 2-1/16 2-5/32 2-5/32 2-5/16 2-5/16

11.35 12.84 14.75 14.75 14.32 19.36 18.79 18.79 21.91 28.25 27.42 28.25 33.47 32.49 38.98 39.97

20mm 25mm 30mm 35mm 40mm 45mm 50mm

64mm 70mm 83mm 92mm 102mm 105mm 111mm

10mm 10mm 10mm 12mm 14mm 14mm 14mm

86mm 95mm 108mm 117mm 130mm 137mm 143mm

33.3mm 35.7mm 40.2mm 44.4mm 51.2mm 52.2mm 54.6mm

11.65 13.23 14.75 19.36 22.57 28.25 33.47

Additional fractional and Metric sizes are available. Please ask your Fastenal Representative for details.

Pillow Block Two Bolt Flange

Vendor Part No. No. Fractional Sizes 0474548 204-12 UCP 0474554 205-16 UCP 0474560 206-18 UCP 0474561 206-19 UCP 0474562 206-20 UCP 0474572 207-20 UCP 0474573 207-22 UCP 0474574 207-23 UCP 0474584 208-24 UCP 0474590 209-26 UCP 0474591 209-27 UCP 0474592 209-28 UCP 0474602 210-30 UCP 0474603 210-31 UCP 0474611 211-32 UCP 0474612 211-35 UCP Metric Sizes 0474549 204-20mm UCP 0474555 205-25mm UCP 0474563 206-30mm UCP 0474575 207-35mm UCP 0474585 208-40mm UCP 0474593 209-45mm UCP 0474604 210-50mm UCP

Shaft Size

Shaft Bolt Hole Overall Overall Height Center Bolt Size Lgth. Ht.

Price /Each

3/4 1 1-1/8 1-3/16 1-1/4 1-1/4 1/3/8 1-7/16 1-1/2 1-5/8 1-11/16 1-3/4 1-7/8 1-15/16 2 2-3/16

1-5/16 1-7/16 1-11/16 1-11/16 1-11/16 1-7/8 1-7/8 1-7/8 1-15/16 2-1/8 2-1/8 2-1/8 2-1/4 2-1/4 2-1/2 2-1/2

3-3/4 4-1/8 4-3/4 4-3/4 4-3/4 5 5 5 5-13/32 5-3/4 5-3/4 5-3/4 6-1/4 6-1/4 6-23/32 6-23/32

3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8

5 5-1/2 6-1/2 6-1/2 6-1/2 6-37/64 6-37/64 6-37/64 7-1/4 7-15/32 7-15/32 7-15/32 8-1/8 8-1/8 8-5/8 8-5/8

2-17/32 $11.31 2-25/32 12.84 3-5/16 14.75 3-5/16 14.75 3-5/16 14.32 3-21/32 19.36 3-21/32 18.79 3-21/32 18.79 3-27/32 21.91 4-3/16 28.25 4-3/16 27.42 4-3/16 28.25 4-7/16 33.47 4-7/16 32.49 4-59/64 38.90 4-59/64 39.92

20mm 25mm 30mm 35mm 40mm 45mm 50mm

33.3mm 36.5mm 42.9mm 47.6mm 49.2mm 54.0mm 57.2mm

95mm 105mm 121mm 127mm 137mm 146mm 159mm

10mm 10mm 14mm 14mm 14mm 14mm 16mm

127mm 140mm 165mm 167mm 184mm 190mm 206mm

64mm 71mm 84mm 93mm 98mm 106mm 113mm

Additional fractional and Metric sizes are available. Please ask your Fastenal Representative for details.

10-154 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

11.65 13.23 14.75 19.36 22.57 28.25 33.47

Vendor Part No. No. Fractional Sizes 0474552 204-12 UCFL 0474558 205-16 UCFL 0474568 206-18 UCFL 0474569 206-19 UCFL 0474570 206-20 UCFL 0474580 207-20 UCFL 0474581 207-22 UCFL 0474582 207-23 UCFL 0474588 208-24 UCFL 0474598 209-26 UCFL 0474599 209-27 UCFL 0474600 209-28 UCFL 0474609 210-31 UCFL 0474617 211-32 UCFL Metric Sizes 0474553 204-20mm UCFL 0474559 205-25mm UCFL 0474571 206-30mm UCFL 0474589 208-40mm UCFL

Shaft Size

Bolt Hole Center

Bolt Size

Overall Lgth.

Overall Ht.

Price /Each

3/4 1 1-1/8 1-3/16 1-1/4 1-1/4 1-3/8 1-7/16 1-1/2 1-5/8 1-11/16 1-3/4 1-15/16 2

3-35/64 3-57/64 4-39/64 4-39/64 4-39/64 5-1/8 5-1/8 5-1/8 5-43/64 5-53/64 5-53/64 5-53/64 6-3/16 7-1/4

3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 5/8

4-7/16 5-1/8 5-13/16 5-13/16 5-13/16 6-11/32 6-11/32 6-11/32 6-7/8 7-13/32 7-13/32 7-13/32 7-3/4 8-13/16

1-5/16 1-13/32 1-19/32 1-19/32 1-19/32 1-3/4 1-3/4 1-3/4 2-1/32 2-1/16 2-1/16 2-1/16 2-5/32 2-5/16

$11.35 12.84 14.75 14.75 14.32 19.36 18.79 18.79 21.91 28.25 27.42 28.25 32.49 38.98

20mm 25mm 30mm 40mm

90mm 99mm 117mm 144mm

10mm 14mm 14mm 14mm

113mm 130mm 148mm 175mm

33.3mm 35.7mm 40.2mm 51.2mm

11.65 13.23 14.75 22.57

Additional fractional and Metric sizes are available. Please ask your Fastenal Representative for details.

10_pHyd_147-192.qxd

3/11/07

2:56 PM

Page 155

Pullers and Puller Sets

Hub Puller Adaptor Set

General Purpose Pullers

• Model HP-2 makes removal of fans, blower wheels and bearings simple • Unique collar design allows this to be a general purpose puller on the following equipment: condensers, convection ovens, chillers, ice machines, freezers, furnace fans, exhaust and ventilating fans, auto heaters, defroster and air conditioning fans • 4 square head set screws provide superior locking power • Pull hubs from 0 to 2" in diameter • Tip reducer/extender included for small diameter

The POSI LOCK line of quality manual gear and bearing pullers sets new standards for quickness, ease and convenience, making it a one-man operation. The T-handle and Cage® control the jaws at all times. This means the opening, closing, locking and aligning of the jaws is all done automatically by simply turning the T-handle. Cage® design pullers provide superior locking power. The no-slip feature saves wear and tear on components removed. POSI LOCK's unique design allows completion of the following applications eliminating the need for many specialty pullers:

• Alternator pulley removal • Battery terminal removal • Harmonic balancer pulley removal • Transmission and differential yoke removal • Steering wheel removal • Power-steering pulley removal • Pitman arm removal • Timing gear and sprocket removal • Differential side bearing removal • Steering arm and linkage removal • U-joint removal and installation • Removal of failed ball bearings by clamping in the ball groove of bearing race • Removal of tapered roller bearing by clamping on lip of race • Pinion bearing removal • Brake drum removal • Transmission bearing removal Three Jaw Pullers Model No. 102 103 104 106 108 110

Part No. 0204022 0204023 0204024 0204025 0204026 0204027

Description 1Ton 2Ton 5 Ton 10 Ton 17 Ton 20 Ton

Power Drive

PULLERS & PULLER SETS

Price /Each $235.50

Part No. 0204038

Gear Pullers Grip-O-Matic® Comes in the following capacity ranges: 1 to 37 ton mechanical and 5 to 100 ton hydraulic. Available in 2-way, 3-way or 2/3-way combinations. 1 TON CAPACITY Standard Jaw Puller, 3 Jaw Part No. 0489651

Model No. 1021

Reach 2.12" Max.

Screw Size 5/16" - 24 x 3-7/8"lg.

Spread 3.25" Max.

Weight 5 lbs.

Price /Each $54.55

2 TON CAPACITY Reversible Jaw Puller, 2/3 Jaw (with double-end, reversible jaws)

Spread 1/4"-3"-1/4" 1/4"-4"-1/2" 1/2"-5" 1/2"-7" 3/4"-12" 1"-15"

Reach 2-1/4" 3" 4" 6" 8" 10"

Price /Each $94.99 109.99 166.79 217.99 269.79 299.99

Spread 1/2"-5" 1/2"-7" 1"-15" 3"-25"

Reach 4" 6" 10" 14"

Price /Each $142.49 189.99 246.99 632.49

Part No. 0489652

Model No. 1023

Reach 3.38" Max.

Screw Size 3/8" - 24 x 4-7/8" lg.

Spread 4.75" Max.

Weight 1.3 lbs.

Price /Each $49.25

Weight 2.8 lbs.

Price /Each $71.50

Weight 3.3 lbs.

Price /Each $71.50

5 TON CAPACITY Reversible Jaw Puller, 2/3 Jaw (with doubleend, reversible jaws)

Two Jaw Pullers Part No. 0204032 0204033 0204035 0204037

Model No. 204 206 210 216

Description 2 Ton 6Ton 14 Ton 35 Ton

Puller Sets Part No. 0401858 0401859

Description 4 Puller Set: Models 104, 106, 110, & 206 with tips 5 Puller Set: Models 103, 104, 106, 110, & 206 with tips

Vendor No. PM4

Price /ea $816.99

PM5

917.29

Part No. 0489653

• 3 Jaw Internal Puller-Reach 3", Spread 9/16" to 4" • Slide Rod-Length 24" • 2.5 lb Hammer • Set of 3 Long Jaws-Reach 13", Spread 1" to 5-1/4" • Tool Board and Accessories Part No. 0204039

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price /Each $369.89

Reach 3.25" Max.

Spread 7.00" Max.

Screw Size 9/16" - 20 x 6-15/16" lg.

5 TON CAPACITY LONG REACH Reversible Jaw Puller, 2/3 Jaw (with double-end, reversible jaws)

Internal Slide Hammer Puller Set Ideal for the removal of many tough internal pulling jobs such as crankshaft pilot bearings, bearing cups, needle bearings, bushings, seals and grease retainers. Tool board and accessories included. Weight: 15 lbs. Create an external slide hammer puller by coupling the POSI LOCK Model 104 or 204 with the slide rod and 2.5 lb hammer or 5 lb hammer. The PM16 Internal Slide Hammer Puller set is ideal for the removal of many tough internal pulling jobs such as crankshaft pilot bearings, bearing cups, needle bearings, bushings, seals and grease retainers.

Model No. 1026

Part No. 0489654

Model No. 1027

Reach 5.50" Max.

Spread 7.00" Max.

Screw Size 9/16" - 20 x 6-15/16" lg.

Hydraulic Gear Pullers Grip-O-Matic Get the world's most copied puller design; the harder the pulling force, the tighter the jaws grip for secure holding force tested for top performance and reliability at maximum capacity and jaw spread removing a wide variety of gears, bearings, bushings, pulleys and other press-fitted parts becomes a routine task

Part No. 0489645 0489646 0489647

Vendor No. PH63C PH83C PH113C

Capacity 6 tons 8 tons 15 tons

Description 2/3 way 2/3 way 2/3 way

Price /Each $555.75 668.55 765.50

10-155 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_147-192.qxd

3/11/07

2:56 PM

Page 156

ROLLER CHAIN AND LINKS/CHAIN & BELT TENSIONERS Roller Chain and Links

Roller Chain Single Strand - Riveted Comes in 10' sections.

Power Drive

Offset Links Offset links (also known as 1/2 links or crank links) are used to make a chain an odd number of pitches in length. Most commonly they are used to shorten a chain by one pitch.

Size #25 #35 #40 #41 #50 #60 #80 #100 #120 #140 #160 #200

Drives Inc. Domestic Price /Each $3.70 2.99 4.55 6.25 4.75 5.78 10.81 16.49 22.75 27.95 33.91 88.78

Part No. 0495952 0495953 0495954 0495955 0495956 0495957 0495958 0495959 0495960 0495961 0495962 0495963

Fastenal Quality Import Price Part No. /Each 60202 $0.81 60205 0.81 60208 0.93 60211 0.93 60214 1.32 60217 1.49 60220 2.49 60223 4.87 60226 8.20 60229 12.28 60232 12.20 60235 37.89

Connecting Links

Size #25 #35 #40 #41 #50 #60 #80 #100 #120 #140 #160 #200

Drives Inc. Domestic Price Part No. /Each 0495964 $1.11 0495965 1.25 0495966 1.33 0495967 0.90 0495968 1.56 0495969 2.40 0495970 3.95 0495971 6.26 0495972 9.13 0495973 14.21 0495974 17.55 0495975 46.78

Fastenal Quality Import Price Part No. /Each 60201 $0.43 60204 0.50 60207 0.56 60210 0.50 60213 0.75 60216 0.87 60219 1.62 60222 3.66 60225 4.89 60228 6.45 60231 9.71 60234 19.10

Size #25 #35 #40 #41 #50 #60 #80 #100 #120 #140 #160 #200

Drives Inc. Domestic Price Part No. /Each 0495940 $8.91 0495941 6.15 0495942 7.28 0495943 5.99 0495944 8.11 0495945 10.99 0495946 23.55 0495947 35.28 0495948 54.30 0495949 65.80 0495950 78.85 0495951 180.73

Fastenal Quality Import Price Part No. /Foot 60200 $2.17 60203 1.93 60206 1.87 60209 1.39 60212 2.86 60215 3.64 60218 6.31 60221 12.65 60224 19.42 60227 26.19 60230 30.93 60233 64.09

Snapidle® Roller Chain Tensioners • Minimal wear to the chain drive since the chain rides on the side plates • Requires no mounting devices or maintenance and is a benefit to the drive system, not a deterrent. Economical, easy to install, maintenance free, the Snapidle® is the answer to the problem of controlling drive chains. • Since the Snapidle® “floats” on the chain drive and actually absorbs shock, it does not add to vibration in the drive. Both sprockets will have the maximum chain wrap possible, thereby increasing chain life (load sharing) and sprocket life (the chain is unable to crawl out of the teeth). Part No. 0400329 0400330 0400331 0400332 0400333 0400334 0400335 0400336

Use With ANSI #25 ANSI #35 ANSI #25-2, 41, 40, 52 ANSI #35-2, 50 ANSI #40-2, 35-3, 60 ANSI #50-2, 35-4, 80 ANSI #60-2, 40-3, 76, 100 ANSI #80-2, 50-3, 40-4, 120

Note: Chain not included.

Price /Ea $40.00 42.50 55.00 65.00 85.00 102.50 145.00 170.00

Rosta Roller Chain and Belt Tensioners Lovejoy ROSTA offers a complete line of multi-purpose elastomeric tensioners that can solve most types of tensioning, suspension, and vibration absorption problems in all fields of mechanical engineering.

• Easy to Install and maintenance free • No Lubrication • Self-adjusting convenience. • Protective finish for long life. • Customized solutions to tensioning, damping, supporting or mounting problems • Will tension roller chains, v-belts, or flat belts • Increase chain and belt life by as much as 30%

Part No. 0439801

Vendor No. 68514417451

Size SE11

Price /Ea $57.36

0439802 0439803 0439804 0439805 0439806

68514417452 68514417453 68514417454 68514417455 68514417456

SE15 SE18 SE27 SE38 SE45

63.32 76.35 97.77 167.60 316.58

Tensioner Selection Table1 (S=Single Strand; D=Double Strand; T=Triple Strand ANSI Chain Size 25S 35 S, D, T 35 S, D, T, 40 S, D, T 41 S, D, T 40 T 41 T 50 S, D, T 60 S, D, T 80 S, D, T 80 T 100 S, D, T 120 S, D, T 140 S, D, T 160 S, D, T 180 S, D 200 S, D

V-Belt2 Size Range A A, B, 3L B, C, 4L, 5L

Flat Belt Width – – 1", 2"

Tensioner Size SE11 SE15 SE18

D, E

2", 3", 4"

SE27

– –

4", 5" 5", 6"

SE38 SE45

1. This data is based on use at “normal” position for all types except SE-W. 2. Precise sizing for V-Belt applications is dependent on variables such as belt size, pulley diameter, HP/RPM, etc. and should be done with the help of Lovejoy Application Engineering.

10-156 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_147-192.qxd

3/11/07

2:56 PM

Page 157

DRIVE BELTS 4L Type

Duraflex GL®-FHP Light industrial applications, appliances, and power equipment require the same tough, long wearing, trouble free belts as high horsepower drives. Because Duraflex GL® has the same construction features as Power King® heavy duty belts, you get maximum belt life on short center distance, high speed fractional horsepower drives.

3L Type Part No. 0453559 0453560 0453561 0453562 0453563 0453564 0453565 0453566 0453567 0453568 0453569 0453570 0453571 0453572 0453573 0453574 0453575 0453576 0453578 0453579 0453590 0453591 0453593 0453595 0453601

Belt Number 3L170 3L180 3L190 3L200 3L210 3L220 3L230 3L240 3L250 3L260 3L270 3L280 3L290 3L300 3L310 3L320 3L330 3L340 3L360 3L370 3L480 3L490 3L510 3L530 3L600

Length 17" 18" 19" 20" 21" 22" 23" 24" 25" 26" 27" 28" 29" 30" 31 32" 33" 34" 36" 37" 48" 49" 51" 53" 59"

Price $4.34 4.69 4.69 4.69 4.69 4.34 4.69 4.69 4.34 4.69 4.58 4.69 4.81 5.04 5.04 5.11 5.17 5.36 5.64 5.41 6.00 6.05 6.12 6.23 6.60

Power King V-Belt

Part No. 0453606 0453607 0453608 0453609 0453610 0453611 0453612 0453613 0453614 0453615 0453616 0453617 0453618 0453619 0453620 0453621 0453622 0453623 0453624 0453625 0453626 0453627 0453628 0453629 0453630 0453631 0453632 0453633 0453634 0453635 0453636 0453637 0453638 0453639 0453640 0453641 0453642 0453643 0453644 0453645 0453646 0453648 0453649

Belt Number 4L170 4L180 4L190 4L200 4L210 4L220 4L230 4L240 4L250 4L260 4L270 4L280 4L290 4L300 4L310 4L320 4L330 4L340 4L350 4L360 4L370 4L380 4L390 4L400 4L410 4L420 4L430 4L440 4L450 4L460 4L470 4L480 4L490 4L500 4L510 4L520 4L530 4L550 4L560 4L570 4L580 4L600 4L610

Length 17" 18" 19" 20" 21" 22" 23" 24" 25" 26" 27" 28" 29" 30" 31" 32" 33" 34" 35" 36" 37" 38" 39" 40" 41" 42" 43" 44" 45" 46" 47" 48" 49" 50" 51" 52" 53" 55" 56" 57" 58" 61" 61"

Price $4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.52 4.58 4.58 4.64 4.69 4.75 4.81 4.87 4.93 4.99 5.04 5.11 5.17 5.50 5.28 5.35 5.58 5.70 5.77 6.19 5.87 6.00 6.00 6.05 6.18 6.23 6.29 6.41 6.47 6.65 6.65 6.76 6.95 7.01

0453650 0453652 0453656 0453658

4L620 4L640 4L680 4L700

62" 64" 68" 70"

7.06 7.25 7.53 7.66

Belt Number 5L290 5L300 5L320 5L390 5L410 5L420 5L430 5L450 5L460 5L480 5L490 5L500 5L510 5L540 5L570 5L580

Length 29" 30" 32" 39" 41" 42" 43" 45" 46" 48" 49" 50" 51" 54" 57" 58"

5L Type Part No. 0453663 0453664 0453666 0453673 0453675 0453676 0453677 0453679 0453680 0453682 0453683 0453684 0453685 0453688 0453691 0453692

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price $7.42 5.77 5.87 9.64 10.11 7.71 10.53 10.92 8.49 11.63 11.82 12.11 9.14 9.61 13.62 13.83

Because they are still the most practical, economical, and dependable belts for industrial drives, innovations have failed to displace the need for the classical belts. Bando's constant improvements in materials, design, and manufacturing methods help Power King® keep pace with industry's ever increasing demands for long, trouble-free belt service.

A Type (1/2" Top Width by 5/16" Thick) Part No. 0453096 0453097 0453098 0453099 0453100 0453101 0453102 0453103 0453104 0453105 0453106 0453107 0453108 0453109 0453110 0453111 0453112 0453113 0453114 0453115 0453116 0453117 0453118 0453119 0453120 0453121 0453122 0453123 0453124 0453125 0453126 0453127 0453128 0453129 0453130 0453131 0453132 0453133 0453134 0453135 0453136 0453137 0453138 0453139 0453140 0453141 0453142 0453143 0453145 0453146 0453147 0453148 0453150 0453153 0453159 0453160

Belt Number A21 A22 A23 A24 A25 A26 A27 A28 A29 A30 A31 A32 A33 A34 A35 A36 A37 A38 A39 A40 A41 A42 A43 A44 A45 A46 A47 A48 A49 A50 A51 A52 A53 A54 A55 A56 A57 A58 A59 A60 A61 A62 A63 A64 A65 A66 A67 A68 A70 A71 A72 A73 A75 A78 A84 A85

Length 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 72 73 74 75 77 80 86 87

Price $3.78 3.78 3.78 3.91 4.10 4.10 4.15 4.22 4.29 4.34 4.45 4.34 4.71 4.81 4.93 4.85 5.29 5.21 5.63 5.61 6.12 6.02 6.61 6.51 6.73 6.73 7.11 6.81 7.25 7.30 7.35 7.35 7.47 7.53 7.53 7.59 7.65 7.72 7.77 7.82 7.88 7.95 8.02 8.07 8.12 8.19 8.24 8.24 8.48 8.48 8.53 8.60 8.84 9.18 10.15 10.32

10-157 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Power Drive

Drive Belts

10_pHyd_147-192.qxd

3/11/07

2:56 PM

Page 158

DRIVE BELTS Drive Belts Cont.

B Type (21/32" Top Width by 13/32" Thick)

Power Drive

Power King V-Belt Cont. Part No. 0453162 0453163 0453164 0453165 0453166 0453168 0453169 0453170 0453171 0453177 0453179 0453182

Belt Number A87 A88 A89 A90 A91 A93 A94 A95 A96 A105 A112 A120

Length 89 90 91 92 93 95 96 97 98 107 114 122

Price $10.56 10.66 10.80 10.97 11.09 11.31 11.46 11.55 11.67 12.50 13.70 14.99

B Type (21/32" Top Width by 13/32" Thick) Part No. 0453189

Belt Number B27

Length 30

Price $7.31

0453190 0453193 0453194 0453195 0453196 0453197 0453198 0453199 0453200 0453201 0453202 0453203 0453204 0453205 0453206 0453207 0453208 0453209 0453210 0453211 0453212 0453213 0453214 0453215 0453216 0453217 0453218 0453219 0453220 0453221 0453222 0453223 0453224 0453225 0453226 0453227 0453228 0453229 0453230 0453231 0453232 0453233 0453234 0453235 0453236 0453237 0453239 0453240

B28 B31 B32 B33 B34 B35 B36 B37 B38 B39 B40 B41 B42 B43 B44 B45 B46 B47 B48 B49 B50 B51 B52 B53 B54 B55 B56 B57 B58 B59 B60 B61 B62 B63 B64 B65 B66 B67 B68 B69 B70 B71 B72 B73 B74 B75 B77 B78

31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 80 81

7.31 7.59 7.59 7.72 7.72 7.82 7.95 8.49 8.49 8.59 8.73 8.73 8.42 8.96 9.06 9.20 9.31 9.43 9.56 9.65 9.79 9.91 10.03 10.03 10.14 9.75 9.75 10.39 10.49 10.61 10.22 10.84 10.44 11.08 11.22 11.31 11.46 11.55 11.12 11.82 11.91 12.05 12.16 12.32 12.51 12.09 13.04 13.22

10-158 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Power King® V-Belts

Part No. 0453241 0453242 0453243 0453244 0453245 0453247 0453248 0453249 0453250 0453252 0453253 0453254 0453255 0453257 0453258 0453259 0453260 0453261 0453262 0453264 0453266 0453268 0453269 0453270 0453271

Belt Number B79 B80 B81 B82 B83 B85 B86 B87 B88 B90 B91 B92 B93 B95 B96 B97 B98 B99 B100 B103 B105 B108 B110 B111 B112

Length 82 83 84 85 86 88 89 90 91 93 94 95 96 98 99 100 101 102 103 106 108 111 113 114 115

Price $13.39 13.58 13.75 13.91 14.13 13.76 14.65 14.81 14.99 14.61 15.52 15.71 15.87 16.23 16.43 16.59 16.78 16.94 17.12 17.66 17.66 18.96 18.83 18.83 18.83

0453277 0453278 0453279 0453280 0453281 0453282 0453285 0453286 0453287 0453288 0453290 0453293 0453294 0453298 0453299 0453302 0453305 0453307 0453310

B120 B122 B123 B124 B126 B128 B133 B136 B138 B140 B144 B150 B154 B173 B180 B195 B225 B255 B300

123 125 126 127 129 131 136 139 141 143 147 153 157 176 183 198 226 256 301

19.97 20.32 20.52 20.67 21.04 21.37 23.12 23.44 24.87 24.87 24.87 26.07 26.35 28.72 30.20 32.59 37.91 42.65 52.13

C Type (7/8" Top width by 17/32" Thick) Part No. 0453315 0453320 0453321 0453325 0453326 0453327 0453328 0453330 0453333 0453334 0453337 0453338 0453339 0453340 0453342 0453343 0453344 0453346 0453348 0453349 0453355 0453357 0453360 0453361 0453368

Belt Number C60 C72 C75 C81 C83 C85 C90 C96 C99 C100 C105 C108 C109 C112 C115 C120 C124 C128 C132 C136 C158 C173 C195 C210 C315

Length 64 76 79 85 87 89 94 100 103 104 109 112 113 116 119 124 128 132 136 140 162 177 199 214 317

Price $19.14 22.52 23.09 25.47 26.30 26.30 28.42 30.02 31.08 31.39 32.89 33.76 34.06 34.97 36.12 37.63 38.51 39.86 42.06 42.06 48.86 53.61 60.41 65.14 96.53

Power King®Cog V-Belts These high horsepower energy savers feature a molded cog design.When the proven reliability, economy, and efficiency of conventional V-belts are combined with an innovative molded cog design, belt users reap important benefits!

AX Type (1/2" Top Width by 5/16" Thick)

D Type (1-1/4" Top Width by 3/4" Thick) Part No. 0453376 0453377 0453385 0453386 0453389

Belt Number D144 D158 D270 D285 D360

Length 149 163 272 287 362

Price $83.21 91.20 152.84 161.15 203.18

Part No.

Belt Number

Length

Price

0453392 0453394 0453397 0453398 0453399 0453400 0453401 0453402 0453403 0453404 0453405 0453407 0453408 0453410 0453411 0453413 0453414 0453415 0453417 0453418 0453419 0453421 0453425 0453426 0453431

AX24 AX26 AX29 AX31 AX32 AX33 AX34 AX35 AX36 AX37 AX38 AX42 AX43 AX46 AX48 AX51 AX53 AX54 AX56 AX58 AX60 AX64 AX71 AX75 AX96

26 28 31 33 34 35 36 37 38 39 40 44 45 48 50 53 55 56 58 60 62 66 73 77 98

$6.18 10.65 6.65 6.33 6.96 12.51 6.72 12.90 12.57 7.52 13.82 7.83 15.11 14.80 8.31 8.57 16.74 9.31 9.55 9.90 9.42 10.37 11.44 11.72 15.46

10_pHyd_147-192.qxd

3/11/07

2:56 PM

Page 159

DRIVE BELTS Power Ace®Narrow V-Belts

BX Type (21/32" Top Width by 7/16" Thick) Part No. 0453436 0453438 0453439 0453440 0453441 0453442 0453443 0453444 0453445 0453446 0453447 0453448 0453449 0453450 0453451 0453452 0453453 0453454 0453455 0453456 0453457 0453458 0453459 0453461 0453462 0453463 0453464 0453465 0453466 0453467 0453468 0453469 0453470 0453471 0453472 0453473 0453474 0453475 0453476 0453477 0453479 0453480 0453481 0453482 0453483 0453484 0453486 0453487 0453488 0453490

Belt Number BX35 BX38 BX41 BX42 BX44 BX46 BX48 BX50 BX51 BX52 BX53 BX54 BX55 BX56 BX57 BX59 BX60 BX61 BX62 BX63 BX64 BX65 BX66 BX68 BX70 BX71 BX75 BX77 BX78 BX79 BX80 BX81 BX82 BX83 BX85 BX90 BX93 BX95 BX96 BX97 BX100 BX103 BX105 BX112 BX113 BX115 BX120 BX124 BX128 BX136

Length 38 41 44 45 47 49 51 53 54 55 56 57 58 59 60 62 63 64 65 66 67 68 69 71 73 74 78 80 81 82 83 84 85 86 88 93 96 98 99 100 103 106 108 115 116 118 123 127 131 139

Price $9.42 9.81 11.31 10.78 12.25 11.67 23.02 22.57 24.06 13.28 13.39 13.53 13.62 25.14 13.98 13.98 24.56 14.28 13.69 14.64 14.80 15.00 15.17 14.79 29.30 29.72 16.02 17.31 17.54 17.72 18.02 18.31 18.68 18.84 19.15 37.28 21.03 21.46 21.74 21.97 22.38 22.94 23.35 25.23 25.48 25.95 26.65 27.55 28.50 30.40

Belt Number CX90 CX120 CX128

Length 94 124 132

Power Ace®, a “narrow” profile belt that transfers loads very efficiently and therefore delivers higher horsepower ratings than classical section belts, should be considered for any new drive system. Power Ace's® efficient design, executed with premium quality materials and advanced manufacturing techniques, can transmit up to 3 times the horsepower of classical section belts in the same space—or the same horsepower in 1/2 to 2/3 the space. You save belt and sheave weight, space and cost—making Power Ace® a great value.

3V Type Part No. 0453014 0453016 0453017 0453018 0453019 0453020 0453021 0453022

Belt Number 3V315 3V355 3V375 3V400 3V425 3V450 3V475 3V500

Length 31.5 35.5 37.5 40 42.5 45 47.5 50

Price $6.76 7.25 8.08 7.51 8.90 8.49 8.78 10.32

0453023 0453024 0453025 0453026 0453027 0453028 0453029 0453030 0453031 0453033 0453034 0453035

3V530 3V560 3V600 3V630 3V670 3V710 3V750 3V800 3V850 3V950 3V1000 3V1060

53 56 60 63 67 71 75 80 85 95 100 106

9.78 9.48 10.16 9.83 10.29 13.16 12.77 12.93 13.71 15.60 16.48 17.41

5V Type (21/32"Top x 17/32"Thick) Part No. 0453043 0453045 0453046 0453047 0453048 0453049 0453051 0453052 0453053 0453056 0453058 0453059 0453061 0453062 0453063 0453065

Belt Number 5V600 5V670 5V710 5V750 5V800 5V850 5V950 5V1000 5V1060 5V1250 5V1400 5V1500 5V1700 5V1800 5V1900 5V2120

Length 60 67 71 75 80 85 95 100 106 125 140 150 170 180 190 212

Price $22.34 24.88 26.43 27.97 29.80 32.17 35.84 35.99 40.16 50.00 50.56 53.66 64.56 65.26 72.56 77.44

Belt Number 8V1180 8V1250 8V1600 8V1700 8V2000 8V2360

Length 118 125 160 170 200 236

Price $85.40 90.56 116.05 124.48 146.35 172.31

8V Type

CX Type (7/8" Top Width by 17/32" Thick) Part No. 0453493 0453499 0453500

Power Ace®Cog V-Belts

Price $37.85 49.81 53.06

Part No. 0453076 0453077 0453081 0453082 0453085 0453088

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Power Drive

Drive Belts Cont.

3VX Type Part No. 0453502 0453504 0453505 0453506 0453507 0453508 0453509 0453510 0453511 0453512 0453513 0453514 0453533 0453515

Length 25 28 30 31.5 33.5 35.5 37.5 40 42.5 45 47.5 50 50 53

Belt Number 3VX250 3VX280 3VX300 3VX315 3VX335 3VX355 3VX375 3VX400 3VX425 3VX450 3VX475 3VX500 5VX500 3VX530

Price $5.93 6.23 6.35 14.15 6.76 7.06 7.30 16.37 16.99 17.71 18.27 8.37 18.55 18.28

0453516 0453517 0453518 0453519 0453520 0453521 0453522 0453523 0453543 0453525 0453526 0453527 0453547 0453529 0453530 0453531

56 60 63 67 71 75 80 85 90 95 100 106 112 118 125 132

3VX560 3VX600 3VX630 3VX670 3VX710 3VX750 3VX800 3VX850 5VX900 3VX950 3VX1000 3VX1060 5VX1120 3VX1180 3VX1250 3VX1320

8.30 9.32 9.60 21.36 11.57 23.78 11.90 28.56 63.17 15.29 16.12 17.07 40.70 19.73 21.10 21.15

Part No. 0453535

Length 56

Belt Number 5VX560

Price $20.22

0453536 0453537 0453538 0453539 0453540 0453541 0453542 0453544

60 63 67 71 75 80 85 95

5VX600 5VX630 5VX670 5VX710 5VX750 5VX800 5VX850 5VX950

21.87 46.57 49.51 23.65 55.65 56.52 60.79 33.41

0453545 0453546 0453548 0453549 0453550 0453552 0453553

100 106 118 125 132 150 170

5VX1000 5VX1060 5VX1180 5VX1250 5VX1320 5VX1500 5VX1700

34.30 79.54 88.73 94.29 99.44 112.72 128.00

5VX Type

10-159 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_147-192.qxd

3/11/07

2:56 PM

Page 160

DRIVE BELTS & O-RINGS Drive Belts Cont.

Variable Speed Belts

Power Drive & Miscellaneous

Rib Ace V-Belts

Belt No. 6PK2440 6PK2425 6PK1765 6PK2490 6PK2600 6PK2515 6PK1800 6PK2220 6PK2465 7PK2470 7PK2480 6PK2345

Part No. 0454135 0454136 0454137 0454138 0454139 0454140 0454141 0454142 0454143 0454144 0454145 0454146

Size .84 x 96.5 .84 x 96.0 .84 x 70.0 .84 x 98.5 .84 x 103.0 .84 x 99.625 .84 x 71.5 .84 x 88.0 .84 x 97.5 .98 x 97.7 .98 x 97.8 .84 x 93.0

Price $24.75 22.50 18.64 26.50 27.60 24.02 19.60 23.20 25.48 28.29 28.42 24.24

Part No. 0454147 0454148 0454149 0454150 0454151 0454152 0454153 0454154 0454155 0454156 0454157 0454158 0454159

Vendor No. 6PK2590 6PL2565 6PK2210 6PK2400 6PK2455 6PK2240 6PK1790 6PK2160 6PK2120 6PK2275 6PK2375 6PK2225 6PK2615

Size .84 x 102.5 .84 x 101.5 .84 x 87.5 .84 x 95.0 .84 x 97.0 .84 x 89.0 .84 x 71.0 .84 x 85.5 .84 x 96.5 .84 x 90.0 .84 x 94.0 .84 x 88.25 .84 x 103.5

Price $27.56 24.48 23.07 23.20 25.37 22.92 19.28 24.42 20.24 23.66 24.55 25.15 27.71

O-Rings

Variable speed drives demand a unique combination of belt features. Because these belts are wide in proportion to their thickness, they must have extreme crosswise rigidity. Without it, the belt will dish in, throw the tensile cords out of alignment, and affect speed control. Variable speed belts also require lengthwise flexibility to bend around small sheaves without excess strain that will shorten belt life. Bando's cog design solves these potential problems by providing excellent flexibility, without sacrificing the crosswise rigidity required to properly position the tensile cords. The result is precise speed control, a wide range of speed ratios, and long, dependable service. Part No. 0453705 0453708 0453711 0453715 0453718 0453724 0453725

Belt Number 1922V426 1922V484 1922V604 2322V347 2322V441 2830V363 2830V367

Price $53.31 58.34 62.49 68.53 72.20 66.47 67.35

0453729 0453732 0453734 0453739

2926V666 3432V450 4230V556 4430V850

101.63 140.20 200.55 248.27

Buna-N 70 In addition to the sizes listed below, all AS568A sizes of Buna-N 70 Durometer O-Rings are available, as well as all AS568A sizes of Buna-N 90, Fluorocarbon 75, Fluorocarbon 90, Silicone 70, EPR 70, Neoprene 70, and TFE. Also available is a wide selection of metric sizes in both Buna-N 70 and Fluorocarbon 75 Durometer.

Buena-N 70 O-Rings • Recommended for general applications • 70 durometer • Black in color Buna-N 70 1/16" Cross Section Small Pack Trade Size #006 #007 #008 #009 #010 #011 #012 #013 #014 #015 #016 #017 #018 #019 #020 #021 #022 #023 #024 #025 #026 #027 #028 #029 #030 #031 #032

I.D. 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/6 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8

O.D. 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-5/8 1-3/4 1-7/8 2

Standard Pack

Part No. 1166800 1166801 1166802 1166803 1166804 1166805 1166806 1166807 1166808 1166809 1166810 1166811 1166812 1166813 1166814 1166815 1166816 1166817 1166818 1166819 1166820 1166821 110480800 110480801 110480802

Pkg. Qty. 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 20 20 20 15 15 15 10 10 10

Price /Pkg. $1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.25 1.25 1.50 1.50 1.50 1.50 1.30 1.40 1.60 1.35 1.50 1.50 1.40 1.40 1.50

110480804

10

1.50

10-160 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 66800 66801 66802 66803 66804 66805 66806 66807 66808 66809 66810 66811 66812 66813 66814 66815 66816 66817 66818 66819 66820 66821 0480800 0480801 0480802 0480803 0480804

Pkg. Qty. 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Price /Pkg. $2.48 2.63 2.58 2.63 2.68 2.74 2.80 2.65 2.75 2.75 3.65 4.18 4.60 5.00 5.15 5.57 5.98 6.39 7.08 7.72 8.37 8.86 4.20 11.37 11.90 12.19 12.38

3/32" Cross Section Small Pack Trade Size #110 #111 #112 #113 #114 #115 #116 #117 #118 #119 #120 #121 #122 #123 #124 #125 #126 #127 #128 #129 #130 #131 #132 #133 #134 #135 #136 #137 #138 #139 #141 #142 #145 #148 #153 #157 #158 #159 #162

I.D. 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/6 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-13/16 1-7/8 1-15/16 2 2-1/16 2-1/8 2-3/16 2-5/16 2-3/8 2-9/16 2-3/4 3-1/2 4-1/2 4-3/4 5 5-3/4

O.D. 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/15 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-13/16 1-7/8 1-15/16 2 2-1/16 2-1/8 2-3/16 2-1/4 2-5/16 2-3/8 2-1/2 2-9/16 2-3/4 2-15/16 3-11/16 4-11/16 4-15/16 5-3/16 5-7/16

Standard Pack

Part No. 1166822 1166823 1166824 1166825 1166826 1166827 1166828 1166829 1166830 1166831 1166832 1166833 1166834 1166835 1166836 1166837 1166838 1166839 1166840 1166841 1166842

Pkg. Qty. 40 40 40 40 25 25 25 25 25 25 25 20 20 20 20 15 15 15 15 10 10

Price /Pkg. $1.40 1.60 1.60 1.60 1.38 1.38 1.38 1.50 1.50 1.50 1.50 1.20 1.40 1.40 1.60 1.35 1.35 1.50 1.50 1.10 1.20

1166843

10

1.70

1166844

10

1.80

Part No. 66822 66823 66824 66825 66826 66827 66828 66829 66830 66831 66832 66833 66834 66835 66836 66837 66838 66839 66840 66841 66842 0480805 0480806 0480807 0480808 0480809 0480810 66843 0480811 66844 0480812 0480813 0480814 66845 0480815 0480816 0480817 0480818 0480819

Pkg. Qty. 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Price /Pkg. $3.00 3.43 3.74 3.95 4.17 4.12 4.33 4.72 4.94 5.26 5.36 5.90 6.43 6.97 7.58 8.04 8.64 9.06 9.59 10.13 10.67 13.32 14.47 15.54 16.61 17.68 19.91 19.90 21.96 22.30 12.40 13.10 15.60 16.10 20.70 35.50 36.20 38.90 42.10

10_pHyd_147-192.qxd

3/11/07

2:57 PM

Page 161

O-RINGS O-Rings Cont.

Buna-N 70 Small Pack Trade Size #325 #326 #327 #329 #330 #331 #332 #333 #334 #335 #336 #337 #338 #339 #340 #341 #342 #344 #345 #346 #347 #348 #350

Buna-N 70 1/8" Cross Section Small Pack Trade Size #202 #210 #211 #212 #213 #214 #215 #216 #217 #218 #219 #220 #221 #222 #223 #224 #225 #226

I.D. 1/4 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-5/8 1-3/4 1-7/8 2

O.D. 1/2 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-7/8 2 2-1/8 2-1/4

#227 #228 #229 #230 #231 #232 #233 #234 #235 #236 #237 #238 #239 #240 #242 #244 #245 #246 #248 #252 #259 #260 #264

2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-1/4 3-3/8 3-1/2 3-5/8 3-3/4 4 4-1/4 4-3/8 4-1/2 4-3/4 5-1/4 6-1/4 6-1/2 7-1/2

2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-1/4 3-3/8 3-1/2 3-5/8 3-3/4 3-7/8 4 4-1/4 4-1/2 4-5/8 4-3/4 5 5-1/2 6-1/2 6-3/4 7-3/4

Standard Pack

Part No.

Pkg. Qty.

Price /Pkg.

1166847 1166848 1166849 1166850 1166851 1166852 1166853 1166854 1166855 1166856 1166857 1166858 1166859 1166860 1166861 1166862 1166863

20 20 20 20 15 15 15 10 10 10 10 10 10 10 5 5 5

$1.20 1.50 1.60 1.80 1.50 1.65 1.80 1.40 1.50 1.60 1.70 1.90 2.00 2.10 1.10 1.15 1.30

1166864

5

1.50

1166865 110480822 1166866

5 5 5

1.70 1.90 2.05

1166867

3

1.35

1166869

3

1.59

110480830

2

1.64

O-Ring Hand Kit Part #99113 • Nitrile 70 Durometer (Buna N) • 30 Most Popular Sizes • 382 Total O-Rings • Convenient storage case for quick size identification Part No. 99113

Contains the following O-Rings:

Price /Each $24.53

Part No. 66846 66847 66848 66849 66850 66851 66852 66853 66854 66855 66856 66857 66858 66859 66860 66861 66862 66863

Pkg. Qty. 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Price /Pkg. $3.92 5.00 6.60 7.30 8.57 9.73 10.72 11.79 12.86 13.86 14.92 16.07 17.14 18.22 19.29 20.36 20.60 23.50

0480820 66864 0480821 66865 0480822 66866 0480823 66867 66868 66869 0480824 66870 66871 0480825 0480826 0480827 0480828 0480829 0480830 0480831 0480832 0480833 0480834

100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50

25.71 27.86 31.16 32.14 34.28 35.20 36.50 36.60 36.90 38.70 20.60 21.25 21.45 21.65 22.75 25.50 26.15 26.40 26.70 27.75 28.70 30.25 31.10

Universal Number 006 007 008 009 010 011 012 110 111 112 113 114 115 116 210

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Width 1/16 1/16 1/16 1/16 1/16 1/16 1/16 3/32 3/32 3/32 3/32 3/32 3/32 3/32 1/8

I.D. 1-1/2 1-5/8 1-3/4 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-1/4 3-3/8 3-1/2 3-5/8 3-7/8 4 4-1/8 4-1/4 4-3/8 4-5/8

O.D. 1-7/8 2 2-1/8 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-1/4 3-3/8 3-1/2 3-5/8 3-3/4 3-7/8 4 4-1/4 4-3/8 4-1/2 4-5/8 4-3/4 5

Part No. 1166886 1166887 1166888 1166889 1166890 110480835 110480836 1166891

Bulk Pack

Pkg. Qty. 5 5 5 5 5 3 3 3

Price /Pkg. $1.15 1.35 1.50 1.55 1.70 1.32 1.38 1.41

Part No. 66886 66887 66888 66889 66890 0480835 0480836 66891 0480837 0480838 66892 0480839 0480840 66893 0480841 66894 66895 66896 66897 66898 0480842 0480843 0480844

Price /Each $0.21 0.25 0.28 0.29 0.32 0.41 0.42 0.44 0.46 0.48 0.49 0.51 0.57 0.58 0.59 0.64 0.70 0.80 0.86 0.91 0.95 1.03 1.05

Buna-N 70 1/4" Cross Section Trade Size #425 #426 #427 #428 #429 #430 #431 #432 #433 #435 #437 #438 #439 #441 #442 #443 #444 #445

Inside Dia. 1/8 5/32 3/16 7/32 1/4 5/16 3/8 3/8 7/16 1/2 9/16 5/8 11/16 3/4 3/4

Outside Dia. 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1

I.D. 4-1/2 4-5/8 4-3/4 4-7/8 5 5-1/8 5-1/4 5-3/8 5-1/2 5-3/4 6 6-1/4 6-1/2 7 7-1/4 7-1/2 7-3/4 8

Pkg. Qty. 20 20 20 20 20 20 20 13 13 13 13 13 13 13 10

O.D. 5 5-1/8 5-1/4 5-3/8 5-1/2 5-5/8 5-3/4 5-7/8 6 6-1/4 6-1/2 6-3/4 7 7-1/2 7-3/4 8 8-1/4 8-1/2

Universal Number 211 212 213 214 215 216 217 218 219 220 221 222 325 326 327

Part No. 66899 0480845 66900 66901 0480846 0480847 0480848 0480849 66902 0480850 0480851 0480852 66903 0480853 0480854 0480855 0480856 0480857

Width 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 3/16 3/16 3/16

Inside Dia. 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-1/2 1-5/8 1-3/4

Outside Dia. 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-7/8 2 2-1/8

Price /Each $1.14 1.39 1.43 1.47 1.55 1.61 1.70 1.75 1.83 1.94 2.02 2.10 2.26 2.48 2.53 2.63 2.80 2.90

Pkg. Qty. 10 10 10 10 10 10 10 10 10 10 10 10 7 7 7

10-161 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Miscellaneous

3/16" Cross Section

10_pHyd_147-192.qxd

3/11/07

2:57 PM

Page 162

O-RINGS O-Rings Cont. Power Drive & Miscellaneous

Metric Buna-N 70 Width 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 2mm 2mm 2mm 2mm 2mm 2mm 2mm 2mm 2mm 2mm 2mm

Inside Dia. 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm 13mm 14mm

Outside Dia. 8mm 9mm 10mm 11mm 12mm 13mm 15mm 17mm 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm

Part No. 0480735 0480736 0480737 0480738 0480739 0480740 0480741 0480742 0480743 0480744 0480745 0480746 0480747 0480748 0480749 0480750 0480751 0480752 0480753

Price /Each $0.06 0.07 0.07 0.07 0.07 0.08 0.08 0.09 0.07 0.07 0.08 0.08 0.08 0.08 0.09 0.09 0.09 0.09 0.09

2mm 2mm 2mm 2mm 2mm 2mm 2mm 2mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm 4mm 4mm 4mm

15mm 16mm 17mm 18mm 20mm 22mm 30mm 40mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 22mm 25mm 9mm 12mm 14mm 15mm 16mm 18mm 19mm 20mm 22mm 24mm 25mm 27mm 28mm 30mm 32mm 33mm 34mm 35mm 36mm 38mm 44mm 45mm 54mm 38mm 41mm 44mm

19mm 20mm 21mm 22mm 24mm 26mm 34mm 44mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm 23mm 24mm 27mm 30mm 15mm 18mm 20mm 21mm 22mm 24mm 25mm 26mm 28mm 30mm 31mm 33mm 34mm 36mm 38mm 39mm 40mm 41mm 42mm 44mm 50mm 51mm 60mm 46mm 49mm 52mm

0480754 0480755 0480756 0480757 0480758 0480759 0480760 0480761 0480762 0480763 0480764 0480765 0480766 0480767 0480768 0480769 0480770 0480771 0480772 0480773 0480774 0480775 0480776 0480777 0480778 0480779 0480780 0480781 0480782 0480783 0480784 0480785 0480786 0480787 0480788 0480789 0480790 0480791 0480792 0480793 0480794 0480795 0480796 0480797 0480798 0480799

0.09 0.11 0.11 0.11 0.11 0.14 0.18 0.23 0.09 0.09 0.09 0.10 0.10 0.10 0.12 0.12 0.12 0.14 0.15 0.22 0.08 0.09 0.11 0.12 0.13 0.13 0.13 0.15 0.15 0.15 0.15 0.18 0.18 0.18 0.23 0.23 0.23 0.23 0.25 0.25 0.29 0.29 0.37 0.34 0.34 0.38

10-162 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Viton® Fluorocarbon

Viton® Fluorocarbon

1/16" Cross Section • Recommended for hydraulic applications • 75 durometer • Brown in color

3/16" Cross Section • Recommended for hydraulic applications • 75 durometer • Brown in color

Trade Size 006 007 008 009 010 011 012 013 014 015 016 017 018 020 022 024

Trade Size 325 326 327 328

I.D. 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 7/8 1 1-1/8

O.D. 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 1 1-1/8 1-1/4

Part No. 0480858 0480859 0480860 0480861 0480862 0480863 0480864 0480865 0480866 0480867 0480868 0480869 0480870 0480871 0480872 0480873

Price /Each $0.13 0.13 0.13 0.13 0.13 0.14 0.16 0.19 0.19 0.23 0.23 0.23 0.26 0.29 0.31 0.35

I.D. 1-1/2 1-5/8 1-3/4 1-7/8

O.D. 1-7/8 2 2-1/8 2-1/4

Price /Each $2.36 2.54 2.62 2.73

Part No. 0480904 0480905 0480906 0480907

Viton® is a registered trademark of E.I. Dupont.

Rubber O-Ring Drawer Kit Buna N - Large Diameters Part #99354 Use in conjunction with insert card #99355 and drawer (not included).

Viton® Fluorocarbon 3/32" Cross Section • Recommended for hydraulic applications • 75 durometer • Brown in color Trade Size 110 111 112 113 114 115 116 118 121 122 124 125 126 128 129 130 133

I.D. 3/8 7/16 1/2 9/16 5/8 11/16 3/4 7/8 1-1/16 1-1/8 1-1/4 1-5/16 1-3/8 1-1/2 1-9/16 1-5/8 1-13/16

O.D. 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1-1/16 1-1/4 1-5/16 1-7/16 1-1/2 1-9/16 1-11/16 1-3/4 1-13/16 2

Part No. 0480874 0480875 0480876 0480877 0480878 0480879 0480880 0480881 0480882 0480883 0480884 0480885 0480886 0480887 0480888 0480889 0480890

Price /Each $0.24 0.25 0.28 0.28 0.28 0.30 0.35 0.41 0.52 0.56 0.58 0.61 0.63 0.66 0.70 0.73 0.77

Viton® Fluorocarbon 1/8" Cross Section • Recommended for hydraulic applications • 75 durometer • Brown in color Trade Size 210 211 212 213 214 215 216 217 218 219 220 221 222

I.D. 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2

O.D. 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4

Part No. 0480891 0480892 0480893 0480894 0480895 0480896 0480897 0480898 0480899 0480900 0480901 0480902 0480903

Price /Each $0.59 0.62 0.65 0.70 0.71 0.75 0.77 0.80 0.86 0.86 0.91 1.19 1.29

Price /Each $26.52

Part No. 99354

Contains the following O-Rings: Trade Size #216 #217 #218 #219 #220 #221 #222 #325 #326 #327 #329 #330 #333 #339

Part No. 66853 66854 66855 66856 66857 66858 66859 66886 66887 66888 66889 66890 66891 66893

Qty. 10 10 10 10 10 10 10 10 10 10 10 10 10 10

10_pHyd_147-192.qxd

3/11/07

2:57 PM

Page 163

O-RINGS AND FLANGE GASKETS Red Rubber Ring Gasket 1/8"

Size

Rubber O-Ring Drawer Kit Buna N - Small Diameters Part #99351 Use in conjunction with insert card #99352 and drawer (not included).

Price /Each $21.95

Part No. 99351

Contains the following O-Rings: Trade Size #006 #007 #008 #009

Part No. 66800 66801 66802 66803

#010 #011 #012 #013 #015 #017 #110 #111 #112 #113 #114 #115 #116 #210 #211 #212 #213 #214

66804 66805 66806 66807 66809 6681 66822 66823 66824 66825 66826 66827 66828 66847 66848 66849 66850 66851

Qty. 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10

Flange Gaskets

3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12

$0.27 0.32 0.32 0.38 0.54 0.59 0.75 0.80 1.08 1.34 1.61 2.26 2.74 4.14

0480027 0480028 0480029 0480030 0480031 0480032 0480033 0480034 0480035 0480036

0.34 0.38 0.43 0.57 0.62 0.78 0.86 1.10 1.38 1.67

Price /Each $0.14 0.16 0.16 0.16 0.21 0.27 0.32 0.32 0.43 0.48 0.62 0.70 1.00 1.39 1.93

150 lb Rating Size

Part No.

Price /Each

3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12

0480071 0480072 0480073 0480074 0480075 0480076 0480077 0480078 0480079 0480080 0480081 0480082 0480083 0480084

$0.21 0.27 0.27 0.32 0.38 0.48 0.54 0.64 0.70 0.80 0.96 1.39 2.50 3.09

Red Rubber Full Face Gasket 1/8"

Size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12

150 lb Rating Price /Each $0.16 0.32 0.38 0.45 0.70 0.96 1.24 1.51 1.73 2.31 2.39 2.85 4.26 7.03 10.13

Part No. 0479980 0479981 0479982 0479983 0479984 0479985 0479986 0479987 0479988 0479989 0479990 0479991 0479992 0479993 0479994

300 lb Rating Price /Each

Part No.

0480042 0480043 0480044 0480045 0480046 0480047

0.43 0.62 0.78 0.99 1.27 1.56

0480049

2.39

Non Asbestos Ring Gasket 1/8"

150 lb Rating Part No. 0479950 0479951 0479952 0479953 0479954 0479955 0479956 0479957 0479958 0479959 0479960 0479961 0479962 0479963 0479964

0479966 0479967 0479968 0479969 0479970 0479971 0479972 0479973 0479974 0479975 0479976 0479977 0479978 0479979

300 lb Rating Price Part No. /Each

Non Asbestos Ring Gasket 1/16"

Red Rubber Ring Gasket 1/16"

Size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12

150 lb Rating Price Part No. /Each

Red Rubber Full Face Gasket 1/16"

Size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

150 lb Rating Price /Each $0.38 0.64 0.92 1.02 1.25 1.94 2.15 2.80 3.54 4.51 4.85 6.06 9.27 13.83 20.75

Part No. 0479995 0479996 0479997 0479998 0479999 0480000 0480001 0480002 0480003 0480004 0480005 0480006 0480007 0480008 0480009

Size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12

150 lb Rating Price Part No. /Each 0480085 $0.38 0480086 0.41 0480087 0.48 0480088 0.54 0480089 0.59 0480090 0.70 0480091 1.08 0480092 1.24 0480093 1.29 0480094 1.85 0480095 2.22 0480096 2.42 0480097 3.04 0480098 5.25 0480099 6.91

300 lb Rating Price Part No. /Each

0480147 0480148 0480149 0480150 0480151 0480152 0480153 0480154 0480155 0480156 0480157 0480158

0.59 0.64 0.75 0.86 1.10 1.27 1.46 1.89 2.29 2.71 3.66 6.53

300 lb Rating Price /Each

Part No.

0480060 0480061 0480062 0480063 0480064 0480065 0480066 0480067 0480068 0480069

1.94 2.36 3.01 3.65 4.89 5.69 7.50 11.31 15.49 21.25

10-163 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Miscellaneous

O-Rings Cont.

10_pHyd_147-192.qxd

3/11/07

2:57 PM

Page 164

FLANGE GASKETS AND E-CLIPS Flange Gaskets Cont.

Non Asbestos Full Face Gasket 1/8"

Miscellaneous

Non Asbestos Full Face Gasket 1/16" 150 lb Rating

150 lb Rating

300 lb Rating

Size

Part No.

Price /Each

3/4 1 1-1/4

0480101 0480102 0480103

$0.83 0.96 1.08

1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12

0480104 0480105 0480106 0480107 0480108 0480109 0480110 0480111 0480112 0480113 0480114

1.24 1.89 2.09 2.44 3.03 3.44 4.10 4.66 6.70 10.56 14.43

Part No.

0480164 0480165 0480166 0480167 0480168 0480169 0480170 0480171 0480172 0480173 0480174

Price /Each

1.72 1.93 2.39 2.98 3.44 4.27 4.80 5.98 8.23 11.15 15.31

300 lb Rating

Size

Part No.

Price /Each

3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12

0480116 0480117 0480118 0480119 0480120 0480121 0480122 0480123 0480124 0480125 0480126 0480127 0480128 0480129

$1.66 1.78 2.15 2.50 4.05 4.21 5.53 6.09 7.19 8.39 9.94 13.89 21.11 26.17

Part No.

Price /Each

0480179 0480180

3.33 4.45

0480182

5.98

0480184

8.53

0480186 0480187

10.71 16.83

E-Clips Carbon Spring Steel (Fractional) E-Clips • Made from SAE 1060-1090 carbon steel • Phosphate finish

Small Pack Shaft Dia. 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1

Thickness .015 .025 .025 .025 .035 .035 .042 .042 .050 .050 .050

Outside Clearance Diameter .230 .335 .527 .500 .660 .687 .800 .940 1.120 1.300 1.500

Vendor No. E-12ST PA E-18ST PA E-25ST PA E-31ST PA E-37ST PA E-43ST PA E-50ST PA E-62ST PA E-75ST PA E-87ST PA E-98ST PA

Part No. 1168075 1168076 1168077 1168078 1168079 1168080 1168081 1168083 1168085 1168087 1168089

Pkg. Qty. 25 25 20 20 15 10 10 5 5 5 5

• Meet DIN Standards • Carbon Steel Rings are made from SAE10601090 steel • Phosphate finish Vendor No. DE-2.3ST PA DE-3.2ST PA DE-4ST PA DE-5ST PA DE-6ST PA DE-7ST PA DE-8ST PA DE-9ST PA DE-10ST PA DE-12ST PA DE-15ST PA DE-19ST PA

Part No. 68075 68076 68077 68078 68079 68080 68081 68083 68085 68087 68089

Pkg. Qty. 100 100 100 100 100 100 100 100 100 100 100

Bulk Pack Price /Each $5.57 5.80 6.90 6.26 8.69 9.51 10.43 13.84 23.49 22.99 31.51

Part No. 0401249 0401251 0401252 0401345 0401253 0401254 0401255 0401256 0401258 0401259 0401346

Pkg. Qty. 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000

Price /Each $33.00 36.40 41.20 40.60 60.60 66.10 80.10 101.90 141.40 169.30 206.20

Stainless Steel E-Clips

Carbon Spring Steel (Metric) E-Clips

Part No. 0423300 0423301 0423302 0423303 0423304 0423305 0423306 0423307 0423308 0423309 0423310 0423311

Standard Pack Price /Each $1.70 1.98 1.58 1.81 1.86 1.47 1.58 1.24 1.30 1.47 1.92

Size 2.3mm 3.2mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 15mm 19mm

10-164 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Ea $0.04 0.04 0.04 0.04 0.05 0.06 0.07 0.09 0.10 0.15 0.19 0.25

• Meet ASME Standards • Stainless Steel Rings are made from PH 15-7 Mo stainless steel • Rings applied directly to the groove from the side of the shaft • Ring provides a shoulder to retain assemblies • Ideal for replacing machine shoulders and pin assemblies Part No. 0423412 0423413 0423415 0423417 0423419 0423420 0423421 0423422 0423423 0423424 0423425 0423426 0423427 0423428 0423429 0423430

Vendor No. SE-6SS E-9SS E-12SS E-15SS E-18SS SE-21SS E-25SS SE-31SS E-37SS E-43SS E-50SS E-62SS SE-74SS E-87SS SE-98SS SE-118SS

Size 1/16 3/32 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1 1-3/16

Price /Ea $0.14 0.14 0.15 0.17 0.18 0.22 0.26 0.26 0.41 0.46 0.60 0.85 1.09 1.89 2.55 3.49

10_pHyd_147-192.qxd

3/11/07

2:57 PM

Page 165

EXTERNAL RETAINING RINGS AND E-CLIPS E-Clips

Metric E-Clip Hand Kit Miscellaneous

Part # 0431274

E-Clip Hand Kit Part #99110

Price /Each $34.00

Part No. 0431274 Price /Each $37.06

Part No. 99110

Contains the following E-Clips: Shaft Dia. 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8

Part No. 68075 68071 68076 68072 68077 68078 68079 68080 68081 68083 68085 68087

Qty. 30 20 30 20 30 30 30 25 20 15 10 5

Contains the following E-Clips Size 2.3mm 3.2mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 15mm 19mm

Part No. 0423300 0423301 0423302 0423303 0423304 0423305 0423306 0423307 0423308 0423309 0423310 0423311

Qty. 20 20 20 20 20 20 20 20 20 20 20 20

External Retaining Rings (Fractional) • Carbon Spring Steel, phosphate finish Small Pack Shaft Dia. 5/32 7/32 9/32 1/8 3/16 1/4 5/16 11/32 3/8 13/32 7/16 1/2 9/16 19/32 5/8 11/16 3/4 25/32 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-13/16 1-7/8 2

Thickness .025 .025 .025 .025 .025 .025 .025 .062 .025 .062 .025 .035 .035 .062 .035 .042 .042 .062 .042 .042 .042 .042 .050 .050 .050 .050 .050 .050 .050 .050 .062 .062 .062 .062 .062 .062 .062

Vendor No. SH-15ST PA SH-21ST PA SH-28ST PA SH-12ST PA SH-18ST PA SH-25ST PA SH-31ST PA SH-34ST PA SH-37ST PA SH-40ST PA SH-43ST PA SH-50ST PA SH-56ST PA SH-59ST PA SH-62ST PA SH-68ST PA SH-75ST PA SH-78ST PA SH-81ST PA SH-87ST PA SH-93ST PA SH-100ST PA SH-106ST PA SH-112ST PA SH-118ST PA SH-125ST PA SH-131ST PA SH-137ST PA SH-143ST PA SH-150ST PA SH-156ST PA SH-162ST PA SH-168ST PA SH-175ST PA SH-181ST PA SH-187ST PA SH-200ST PA

Standard Pack

Part No.

Pkg. Qty.

Price /Pkg.

1168005 1168006 1168007 1168008

15 15 15 15

2.03 2.54 1.53 1.70

1168009

15

1.70

1168010 1168011 1168012 1168102 1168013 1168014 1168015 1168104 1168016 1168017 1168018 1168019 1168020 1168021 1168022 1168023 1168024 1168025 1168026 1168027 1168028 1168029

15 15 10 10 10 10 10 5 5 5 5 5 5 5 5 5 3 3 3 3 3 2

1.86 2.03 1.47 2.37 1.70 1.92 2.03 1.19 1.13 1.19 1.30 1.41 1.70 1.75 1.81 1.92 1.29 1.39 1.56 1.63 1.76 1.51

1168031

2

1.56

1168033 1168034

2 2

1.70 1.81

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Part No. 68002 68003 68004 68005 68006 68007 68008 68099 68009 68101 68010 68011 68012 68102 68013 68014 68015 68104 68016 68017 68018 68019 68020 68021 68022 68023 68024 68025 68026 68027 68028 68029 68030 68031 68032 68033 68034

Pkg. Qty. 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50

Bulk Pack Price /Pkg. $12.86 15.00 9.65 13.56 14.35 8.65 9.47 16.35 9.64 18.84 12.43 11.90 12.85 20.56 15.00 16.71 18.00 19.48 18.77 20.06 22.07 23.63 28.14 29.80 31.20 33.43 35.31 39.00 45.42 46.80 51.10 64.11 62.13 66.85 68.16 35.86 39.00

Part No. 0401359 0401370 0401382 0401353 0401365 0401377 0401388 0401392 0401397 0401401 0401404 0401408 0401411 0401413 0401416 0401420 0401423 0401424 0401426 0401428 0401430 0401348 0401349 0401350 0401351 0401352 0401354 0401355 0401356 0401357 0401358 0401360 0401361 0401362 0401363 0401364 0401366

Pkg. Qty. 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000

Price /Pkg. $37.50 41.60 45.30 52.50 58.70 44.50 46.10 47.30 48.90 79.80 71.00 67.80 74.70 97.50 79.60 88.90 94.10 94.20 99.10 108.80 126.60 135.90 152.00 168.20 176.30 182.80 188.80 197.00 254.20 230.90 291.20 338.60 322.30 370.00 385.80 402.80 439.20

10-165 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_147-192.qxd

3/11/07

2:58 PM

Page 166

EXTERNAL RETAINING RINGS Retaining Rings Miscellaneous

Steel External Retaining Rings Metric - DIN 471

Small Pack Size M4 M5 M6 M7 M8 M9 M10 M11 M12 M13 M14 M15 M16 M17 M18 M19 M20 M21 M22 M23 M24 M25 M26 M27 M28 M29 M30 M31 M32 M33 M34 M35 M36 M37 M38 M39 M41 M42 M44 M45 M46 M47 M48 M50 M52 M56 M57 M58 M60 M62 M63 M65 M67 M68 M70 M72 M75

Part No.

1135302 1135304 1135306 1135308 1135310 1135311 1135312 1135313 1135314 1135316

1135321

1135326

1135331

1135340

1135344

Standard Pack Price Price Pkg. Qty. /Pkg. Part No. Pkg. Qty. /Pkg. 35300 100 $7.06 35301 100 8.03 15 1.50 35302 100 8.52 35303 100 8.75 15 1.50 35304 100 8.82 35305 100 13.95 15 1.80 35306 100 9.37 35307 100 7.38 10 1.40 35308 100 5.54 35309 100 7.42 10 1.60 35310 100 8.08 10 1.70 35311 100 8.68 10 1.90 35312 100 8.24 5 1.05 35313 100 9.80 5 1.10 35314 100 10.45 35315 100 11.47 5 1.20 35316 100 11.55 35317 100 12.60 35318 100 14.24 35319 100 17.77 35320 100 18.21 5 1.55 35321 100 17.91 35322 100 17.95 35323 100 22.43 35324 100 23.48 35325 100 33.53 3 1.50 35326 100 16.72 35327 100 34.20 35328 100 37.11 35329 100 38.86 35330 100 38.98 2 1.38 35331 100 40.93 35332 100 46.92 35333 100 47.08 35334 100 52.33 35335 100 52.60 35337 100 62.59 35338 100 62.75 35339 100 68.68 1 1.34 35340 100 68.84 35341 100 74.98 35342 50 37.60 35343 50 39.32 1 1.61 35344 50 40.40 35345 50 46.03 35348 50 49.04 35349 50 53.00 35350 50 53.50 35351 25 27.75 35352 25 29.50 35353 25 30.50 35354 25 35.00 35355 25 35.75 35356 25 36.00 35357 25 38.25 35358 25 39.00 35359 5 7.80

10-166 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Small Pack

Size M77 M78 M80 M82 M85 M87 M88 M90 M92 M95 M97 M98 M100

Standard Pack Price Price Part No. Pkg. Qty. /Each Part No. Pkg. Qty. /Each 35360 5 $8.45 35361 5 8.45 35362 5 9.00 35363 5 9.80 35364 5 12.60 35365 5 12.60 35366 5 12.65 35367 5 12.70 35368 5 12.75 35369 5 12.85 35370 5 14.95 35371 5 13.40 35372 5 13.90

Stainless Steel External Retaining Rings • Meet ASME Standards • Stainless Steel Rings are made from PH 15-7 Mo stainless steel • Meets ASME standards • Easily installed and removed by the plier holes • Expand to pass over shaft and spring into groove when released • Tapered section provides constant pressure to secure against heavy thrust loads Size 1/4 9/32 5/16 3/8 13/32 7/16 1/2 9/16 19/32 5/8 11/16 3/4 13/16 7/8 15/16 63/64 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 3/4 1 7/8 2

Part No. 0423350 0423351 0423352 0423354 0423355 0423356 0423357 0423358 0423359 0423360 0423361 0423362 0423363 0423364 0423365 0423366 0423367 0423368 0423369 0423370 0423371 0423372 0423373 0423374 0423375 0423376 0423377 0423379 0423380 0423381

Vendor No. SH-25SS SH-28SS SH-31SS SH-37SS SH-40SS SH-43SS SH-50SS SH-56SS SH-59SS SH-62SS SH-68SS SH-75SS SH-81SS SH-87SS SH-93SS SH-98SS SH-100SS SH-106SS SH-112SS SH-118SS SH-125SS SH-131SS SH-137SS SH-143SS SH-150SS SH-156SS SH-162SS SH-175SS SH-187SS SH-200SS

Price /Ea $0.59 0.59 0.59 0.60 0.61 0.62 0.68 0.73 0.74 0.76 0.82 0.91 0.98 1.02 1.10 1.16 1.18 1.66 1.77 1.87 1.99 2.08 2.18 2.27 2.37 3.52 3.76 4.52 5.05 5.56

External Retaining Ring Hand Kit Part #99108

Price /Each $39.75

Part No. 99108

Contains the following Retaining Rings: Trade Size 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 13/16 7/8 1 1-1/4

Part No. 68007 68008 68009 68010 68011 68012 68013 68015 68016 68017 68019 68023

Qty. 30 20 50 20 50 20 30 35 10 20 10 5

Metric External Retaining Ring Hand Kit Part # 0431276

Price /Each $39.75

Part No. 0431276

Contains the following Retaining Rings Size 8mm 9mm 10mm 12mm 14mm 15mm 16mm 18mm 19mm 20mm 22mm 24mm

Part No. 35304 35305 35306 35308 35310 35311 35312 35314 35315 35316 35318 35320

Qty. 20 20 20 20 20 20 20 20 20 20 20 20

10_pHyd_147-192.qxd

3/11/07

2:58 PM

Page 167

EXTERNAL & INTERNAL RETAINING RINGS Miscellaneous

Retaining Rings Cont.

External Retaining Ring Drawer Kit Part #99348 Use in conjunction with insert card #99349 and drawer (not included).

Price /Each $69.10

Part No. 99348

Contains the following Retaining Rings: Trade Size 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 7/8

Part No. 68005 68006 68007 68008 68009 68010 68011 68012 68013 68014 68015 68017

Qty. 25 25 30 20 50 20 50 20 30 15 35 20

Trade Size 1 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-3/4 1-7/8 2

Part No. 68019 68022 68023 68024 68025 68026 68027 68028 68029 68031 68033 68034

Qty. 10 15 5 15 10 10 10 10 10 10 10 10

Internal Retaining Rings • Carbon Spring Steel • Phosphate finish

Small Pack Diameter 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-13/16 1-7/8 1-15/16 2

Thickness .062 .015 .025 .025 .035 .035 .035 .035 .035 .042 .042 .042 .042 .050 .050 .050 .050 .050 .050 .050 .050 .062 .062

Vendor No. HO-25ST PA HO-31ST PA HO-37ST PA HO-43ST PA HO-50ST PA HO-56ST PA HO-62ST PA HO-68ST PA HO-75ST PA HO-81ST PA HO-87ST PA HO-93ST PA HO-100ST PA HO-106ST PA HO-112ST PA HO-118ST PA HO-125ST PA HO-131ST PA HO-137ST PA HO-143ST PA HO-150ST PA HO-156ST PA HO-162ST PA

.062 .062 .062 .062 .062 .062

HO-168ST PA HO-175ST PA HO-181ST PA HO-187ST PA HO-193ST PA HO-200ST PA

Standard Pack

Part No. 1168150 1168040 1168041 1168042 1168043 1168044 1168045 1168046 1168047 1168048 1168049 1168050 1168051 1168052 1168053 1168054 1168055 1168056 1168057 1168058 1168059 1168060 1168061

Pkg. Qty. 20 15 15 15 15 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 3 3

Price /Pkg. $1.81 1.70 1.86 1.86 2.03 1.47 1.58 1.70 1.81 1.92 2.03 1.19 1.24 1.30 1.47 1.53 1.58 1.64 1.75 1.92 2.26 1.56 1.76

1168063

2

1.76

1168065

2

1.88

1168066

2

1.92

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Bulk Pack

Part No. 68150 68040 68041 68042 68043 68044 68045 68046 68047 68048 68049 68050 68051 68052 68053 68054 68055 68056 68057 68058 68059 68060 68061

Pkg. Qty. 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Price /Pkg. $6.92 8.65 9.55 11.12 11.58 11.83 12.68 14.16 15.39 15.60 17.13 19.12 20.15 21.54 24.15 24.45 26.14 27.49 28.76 32.23 39.21 42.74 48.60

68062 68063 68064 68065 68152 68066

50 50 50 50 50 50

29.36 31.32 32.32 34.16 35.52 37.02

Part No. 0401287 0401296 0401303 0401309 0401315 0401319 0401323 0401327 0401331 0401334 0401338 0401340 0401261 0401262 0401263 0401264 0401265 0401266 0401267 0401268 0401269 0401270 0401271

Pkg. Qty. 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000

Price /Pkg. $48.10 49.80 58.90 61.80 67.80 62.30 67.10 81.20 85.20 89.40 96.60 103.90 112.20 136.70 146.80 149.80 158.10 165.40 175.90 185.20 196.10 249.10 256.40

0401272 0401273 0401274 0401275 0401276 0401277

1000 1000 1000 1000 1000 1000

271.00 306.50 343.10 345.80 363.40 387.60

10-167 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_147-192.qxd

3/11/07

2:58 PM

Page 168

INTERNAL RETAINING RINGS Retaining Rings Cont. Miscellaneous

Steel Internal Retaining Rings Metric - DIN 472

Size M8 M9 M10 M11 M12 M13 M14 M15 M16 M17 M18 M19

Part No. 35200 35201 35202 35203 35204 35205 35206 35207 35208 35209 35210 35211

Pkg. Qty. 100 100 100 100 100 100 100 100 100 100 100 100

Price /Pkg. $6.70 7.21 8.24 8.76 10.30 11.18 12.48 12.88 13.93 16.19 15.81 16.39

M20 M21 M22 M23 M24 M25 M26 M27 M28 M29 M30 M31 M32 M33 M34 M35 M36 M37 M38 M39 M40 M41 M42 M43 M44 M45 M46 M47 M48 M49 M50 M51 M52 M53 M54 M55 M56 M57 M58 M60 M62 M63 M65 M67 M68 M70

35212 35213 35214 35215 35216 35217 35218 35219 35220 35221 35222 35223 35224 35225 35226 35227 35228 35229 35230 35231 35232 35233 35234 35235 35236 35237 35238 35239 35240 35241 35242 35243 35244 35245 35246 35247 35248 35249 35250 35251 35252 35253 35254 35255 35256 35257

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 5

16.07 16.61 16.48 17.00 17.51 18.54 19.57 22.66 25.75 28.84 30.90 32.96 36.05 39.14 41.20 43.26 46.35 54.27 51.50 25.00 56.65 65.56 30.90 37.49 37.08 38.11 39.14 41.78 41.20 45.00 48.07 57.00 62.50 62.00 30.50 62.00 70.00 76.00 75.00 77.50 44.25 43.25 42.50 44.50 46.50 45.25

10-168 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Size M72 M75 M77 M78 M80 M82 M85 M87 M88 M90 M92 M95 M97 M98 M100

Part No. 35258 35259 35260 35261 35262 35263 35264 35265 35266 35267 35268 35269 35270 35271 35272

Pkg. Qty. 5 5 5 5 5 5 5 5 5 5 5 5 5 5 2

Price /Pkg. $46.50 9.55 10.10 10.60 10.30 11.05 12.90 14.00 14.85 15.75 16.00 19.00 19.35 20.60 8.76

Fractional Internal Retaining Ring Hand Kit Part #99109

Price /Each $40.71

Stainless Steel Internal Retaining Rings

Part No. 99109

• Meet ASME Standards • Stainless Steel Rings are made from PH 15-7 Mo stainless steel • Rings are compressed into a bore or housing • The portion of the ring protruding from the groove holds an assembly in place • Easily installed and removed by the plier holes

Contains the following Retaining Rings:

Size 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16

Part No. 0423382 0423383 0423384 0423385 0423386 0423387 0423388 0423389 0423390 0423392 0423393 0423395 0423396 0423398 0423399 0423400 0423401 0423402 0423403 0423404 0423405 0423406 0423407 0423408

Vendor No. HO-25SS HO-31SS HO-37SS HO-43SS HO-50SS HO-56SS HO-62SS HO-68SS HO-75SS HO-81SS HO-87SS HO-93SS HO-100SS HO-106SS HO-112SS HO-118SS HO-125SS HO-131SS HO-137SS HO-143SS HO-150SS HO-156SS HO-162SS HO-168SS

Price /Ea $0.64 0.65 0.67 0.69 0.73 0.78 0.81 0.85 0.89 1.02 1.08 1.12 1.20 1.50 1.57 1.64 1.71 1.80 1.87 1.97 2.05 2.72 2.83 2.96

1 3/4 1 7/8 2

0423409 0423410 0423411

HO-175SS HO-187SS HO-200SS

3.34 3.58 3.89

Trade Size 3/8 1/2 5/8 3/4 13/16

Part No. 68041 68043 68045 68047 68048

7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4

68049 68051 68053 68055 68057 68059 68063

Qty. 25 25 25 25 25 15 15 15 10 10 5 5

Metric Internal Retaining Ring Hand Kit Part # 0431275

Price /Each $39.00

Part No. 0431275 Size 8mm 9mm 10mm 12mm 14mm 15mm 16mm 18mm 19mm 20mm 22mm 24mm

Part No. 35200 35201 35202 35204 35206 35207 35208 35210 35211 35212 35214 35216

Qty. 20 20 20 20 20 20 20 20 20 20 20 20

10_pHyd_147-192.qxd

3/11/07

2:58 PM

Page 169

RETAINING RINGS & SPIRAL RINGS Spiral Rings

External Medium Duty

Internal Retaining Ring Drawer Kit

External Light Duty

Part #99345

Use in conjunction with insert card #99346 and drawer (not included). Price /Each $72.37

Part No. 99345

Contains the following Retaining Rings: Shaft Dia. 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-3/4 1-7/8 2

Part No. 68042 68043 68044 68045 68046 68047 68048 68049 68050 68051 68052 68053 68055 68056 68057 68058 68059 68060 68061 68063 68065 68066

Qty. 25 15 25 15 15 15 15 15 15 10 10 10 10 25 5 25 5 10 5 5 5 5

Retaining Ring Pliers • Crafted from drop forged chrome vanadium steel • Single piece design provides superior strength and durability • Internal and external styles available

Pn. 0266479

Pn. 0266481 Part No. 0266479 0266480 0266481 0266482

Length 7"

Pn. 0266480

Pn. 0266482

Description Price Straight Nose Internal Snap $8.28 Ring Pliers 7" Bent Nose Internal Snap Ring Pliers 9.04 7" Straight Nose External Snap 9.34 Ring Pliers 7" Bent Nose External Snap Ring Pliers 8.29

Size 1/2 3/4 7/8 1 1-1/8 1-5/16 1-3/8 1-7/16 1-5/8 1-13/16 1-15/16 2

Part No. 0428209 0428210 0428211 0428212 0428213 0428214 0428215 0428216 0428217 0428218 0428219 0428220

Vendor No. VS-050 VS-075 VS-087 VS-100 VS-112 VS-131 VS-137 VS-143 VS-162 VS-181 VS-193 VS-200

Price /Each $0.18 0.21 0.27 0.27 0.30 0.32 0.43 0.48 0.54 0.59 0.64 0.70

Internal Light Duty

Size 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-5/8 1-3/4 1-7/8 2

Part No. 0428221 0428222 0428223 0428224 0428225 0428226 0428227 0428228 0428229 0428230 0428231 0428232 0428233 0428234 0428235

Vendor No. VH-050 VH-062 VH-075 VH-087 VH-100 VH-112 VH-125 VH-131 VH-137 VH-143 VH-150 VH-162 VH-175 VH-187 VH-200

Price /Each $0.17 0.24 0.24 0.25 0.26 0.27 0.30 0.32 0.39 0.43 0.44 0.51 0.54 0.54 0.59

Internal Medium Duty

Size 1/2 9/16 19/32 3/4 7/8 1 1-1/8 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-5/8 2

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Part No. 0428236 0428237 0428238 0428239 0428240 0428241 0428242 0428243 0428244 0428245 0428246 0428247 0428248 0428249

Vendor No. WH-050 WH-056 WH-059 WH-075 WH-087 WH-100 WH-112 WH-125 WH-131 WH-137 WH-143 WH-150 WH-162 WH-200

Price /Each $0.27 0.29 0.31 0.33 0.35 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.63 0.89

Size 1/2 5/8 3/4 7/8 1 1-1/4 1-5/16 1-3/8 1-1/2 1-5/8 1-3/4 2

Part No. 0428250 0428251 0428252 0428253 0428254 0428255 0428256 0428257 0428258 0428259 0428260 0428261

Vendor No. WS-050 WS-062 WS-075 WS-087 WS-100 WS-125 WS-131 WS-137 WS-150 WS-162 WS-175 WS-200

Price /Each $0.30 0.38 0.36 0.39 0.43 0.48 0.51 0.54 0.64 0.70 0.75 1.02

Internal Heavy Duty

Size 1/2 5/8 3/4 7/8 15/16 1-1/8 1-1/4 1-5/16 1-3/8 1-1/2 1-9/16 1-3/4 2

Part No. 0428262 0428263 0428264 0428265 0428266 0428267 0428268 0428269 0428270 0428271 0428272 0428273 0428274

Vendor No. WHM-050 WHM-062 WHM-075 WHM-087 WHM-093 WHM-112 WHM-125 WHM-131 WHM-137 WHM-150 WHM-156 WHM-175 WHM-200

Price /Each $0.27 0.29 0.31 0.60 0.73 0.74 0.75 0.77 0.77 0.79 0.80 0.81 0.83

External Heavy Duty

Size 1/2 5/8 3/4 7/8 1 1-1/4 1-3/8 1-1/2 1-9/16 1-3/4 2

Part No. 0428275 0428276 0428277 0428278 0428279 0428280 0428281 0428282 0428283 0428284 0428285

Vendor No. WSM-050 WSM-062 WSM-075 WSM-087 WSM-100 WSM-125 WSM-137 WSM-150 WSM-156 WSM-175 WSM-200

Price /Each $0.27 0.32 0.86 0.91 0.96 1.08 1.11 1.12 1.14 1.19 1.24

10-169 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Miscellaneous

Retaining Rings Cont.

10_pHyd_147-192.qxd

3/11/07

2:58 PM

Page 170

GREASE FITTINGS Grease Fittings Industrial Lubricants & Equipment

Grease Fittings Zerk

45° Fitting

90° Fitting

Description 1/8 NPT 1/8" NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT

Features Straight - Short Straight - Standard Straight - Long (1-1/4) Straight-Extra Long (1-3/4) Straight-Super Long (2-5/8) 30° Angle

Part No. 58750 60102 58752 58753 58754 58755

1/8" NPT 1/8 NPT 1/8" NPT 1/8 NPT Female 1/4 NPT 1/4 NPT 1/4"-28 1/4-28 1/4-28 1/4-28 1/4"-28 1/4-28 1/4-28 1/4"-28 1/4-28 1/4-28 UNF-2A 1/4-28 UNF-2A 5/16-24 UNF 2A 3/8-24 UNF 2A 1/8 Drive 3/16" Drive 3/16 Drive 3/16 Drive 1/4 Drive 1/4 Drive 1/4 Drive 5/16 Drive 3/8 Drive 1/8 NPT Button 1/4 NPT Button 3/8 NPT Button 1/8 NPT 1/8 NPT 1/8 NPT 1/4-28 1/4-28 1/4-28

45° Angle 65° Angle 90° Angle Straight Straight 67-1/2° Angle Straight - Standard Straight-Long Shank (11/16) Straight-Long (31/32) Straight-Very Long (1-39/64) 45° Angle 45° Angle - Long (31/32) 65° Angle 90° Angle 90° Angle-Long (51/64) Straight-Short Threads 45° Angle-Short Threads Straight Straight Straight - No Ball Check Straight Straight - No Ball Check 45° Angle Straight Straight - No Ball Check 65° Angle Straight Straight - No Ball Check Straight - Ball Check Straight - Ball Check Straight - Ball Check Self-Tapping Straight Self-Tapping 45° Angle Self-Tapping 90° Angle Self-Tapping Straight Self-Tapping 45° Angle Self-Tapping 90° Angle

60103 58757 60104 58759 58760 58761 60105 58763 58764 58765 60106 58767 58768 60107 58770 58771 58772 58773 58774 58775 60108 58777 58778 58779 58780 58781 58782 58783 58784 58785 58786 58787 58788 58789 58790 58791 58792

*Most commonly used.

10-170 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Utility Line Vendor No. H1644 H1610* H1607 H1669 H1684 H1611 H1688* H1612 H1613* H1618 H1627 H1629 H1641* H1652 H1680 H3014 H1637* H1636 H3010 H1911* H1790 H1792 H1770 H1711 H1710 H3019 H1728* H1633 H1992 H1743 H1952 H1744 H1608 H1666 H1184 H1186 H1188 H1720 H1724 H1723 H3038 H3053 H3054

Price /Each $0.36 0.29 0.73 0.96 1.11 0.48 0.64 0.57 0.58 0.98 0.73 0.96 0.20 0.30 0.49 1.50 0.51 0.55 0.47 0.51 0.68 0.20 0.87 0.33 0.36 0.54 0.23 0.31 0.88 0.24 0.31 0.88 0.30 0.47 1.06 1.30 1.74 0.32 0.80 0.69 0.67 0.64 0.72

Straight Fitting

Part No. 58793 58794 58795 58796 58797 58798

Alemite Brand Vendor No. 1644-B 1610-BL 1607-B 1669-B 1684-B 1611-B

Price /Each $0.54 0.43 1.15 1.77 2.80 1.36

Part No.

Lincoln Brand Vendor No.

Price /Each

58836 58837

5000 5003

$0.38 1.61

58799 58800 58801 58802 58803 58804 58805 58806 58807 58808 58809

1688-B 1612-B 1613-B 1618-B 1627-B 1629-B 1641-B 1652-B 1680-B 3014-B 1637-B1

1.30 1.51 0.86 2.15 0.91 1.83 0.23 0.38 0.96 2.68 0.80

58838 58839 58840 58841 58842 58843 58844 58845

5200 5300 5400 5505 5050 5350 5010 5013

1.58 1.18 1.33 2.52 0.98 2.08 0.47 0.68

58847

5210

1.58

58811 58812

3010-B 1911-B1

0.96 0.70

58848 58849

700396 5410

1.43 0.98

58814 58815 58816

1792-B 1770-B1 1711-B

0.32 1.34 0.75

58850

5527

0.47

58818 58819 58820 58821 58822 58823 58824 58825 58826 58828 58829 58830 58831

3019 1728-B 1633 1992-B1 1743-B 1952 1744-B1 1608-B 1666 A-1184 A-1186 A-1188 1720-B

0.54 0.32 0.43 1.34 0.32 0.43 1.46 0.38 1.29 2.31 2.53 3.22 0.70

58851

5033

0.58

58854

5031

0.32

58855

5701

2.00

58857

571

2.48

58833 58834 58835 58817

1723-B 3038-B 3053-B 3054-B

1.02 0.27 0.80 1.08

58861

205010

0.47

10_pHyd_147-192.qxd

3/11/07

2:59 PM

Page 171

GREASE FITTINGS & OIL ACCESSORIES

Metric Grease Fittings Part No. 0496000 0496001 0496002 0496003 0496004 0496005 0496006 0496007 0496008

Description 6mm x 1.0 6mm x 1.0 6mm x 1.0 8mm x 1.0 8mm x 1.0 8mm x 1.0 10mm x 1.0 10mm x 1.0 10mm x 1.0

Features Straight 45° Angle 90° Angle Straight 45° Angle 90° Angle Straight 45° Angle 90° Angle

Vendor No. H2106 H2107 H2108 H2103 H2104 H2105 H2109 H2110 H2111

Price /Each $0.36 0.78 0.84 0.49 0.96 1.03 0.49 1.02 1.02

Part No. 0489563 0489564

Vendor No. 719 715

Description 4 Qt. 1 Qt.

Price /Each $23.29 16.29

Vendor No. 743

Description 4 Qt.

Price /Each $60.69

Fill Can

Stainless Grease Fittings Part No. 0489565 Part No. 0496009 0496010

Description 1/8" NPT 1/8" NPT

Features Straight 45° Angle

Vendor No. H1610S H1688S

Price /Each $2.54 4.63

0496011 0496012 0496013 0496014 0496015 0496016 0496017

1/8" NPT 1/4"-1/8" NPT 1/4"-28 1/4"-28 1/4"-28 3/16" Drive 1/4" Drive

85° (90°) Straight Straight 45° Angle 90° Angle Straight Straight

H1613S H1627S H1641S H1637S H1911S H1728S H1743S

4.63 6.15 1.40 3.63 3.99 1.81 1.97

Grease Fitting Hand Kit Part #99112

Oil Drain Pans

3-1/2 Gallon Model Vendor No. 721 723

Part No. 0489566 0489567

7 Gallon Model Price /Each $11.37 36.86

Description 3-1/2 Gallons 7 Gallons

Funnels

Part No. Price/Each

99112 $59.32

Contains the following Fittings: Part No. 60105 60106 60107 60102 60103 60104

Description 1/4-28 1/4-28 1/4-28 1/8 NPT 1/8 NPT 1/8 NPT

Features Straight 45° Angle 90° Angle Straight 45° Angle 90° Angle

Quantity 30 10 10 30 5 5

14" Flex Model Vendor No. 86 701 705

Part No. 0489568 0489569 0489570

1 Qt. Galvanized Model

5 Qt. Off Set Model

Description 14" Flex 1 Qt. Galvanized 5 Qt. Off Set

Price /Each $10.89 8.09 31.77

Hand Oilers

Oil Accessories

With Rigid Spout Corrosion resistant finish. Heavy duty steel bodies. Available in 6 oz., 12 oz., 16oz., and 1qt. sizes.

Grease Guns & Accessories

Part No. 58864 58865 58866 58867 58868 58869 58870 58871 58880 58881 58882

Description Needle Nozzle Coupler; Grease Gun, Standard Coupler; Grease Gun, Heavy Duty 360° Grease Coupler 12" Grease Hose w/ Spring Guard 36" Grease Hose Nipple,1/4" Linc,1/4" MNPT 1/4" Female NPT Coupler - 2 pack 12" Grease Hose 18" Grease Hose Grease Gun Filler Pump

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price /Each $11.99 3.40 6.76 20.22 13.13 26.69 2.89 9.33 7.67 12.72 70.42

Part No. 0489610 0489608 0489609 0400211

Vendor No. G503 G504 G507 50-347

Description 6 oz. Hand Oiler - Flex Spout 12 oz. Hand Oiler - Flex Spout 16 oz. Hand Oiler - Flex Spout 1 Quart Hand Oiler-Flex Spout

Price /Each $11.28 13.23 15.75 22.89

10-171 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Industrial Lubricants & Equipment

Oil Cans

Grease Fittings Cont.

10_pHyd_147-192.qxd

3/11/07

2:59 PM

Page 172

GREASE GUNS Grease Guns Industrial Lubricants & Equipment

12V Cordless Grease Gun Cordless grease gun with 12V hi-torque motor. Powered by 12V Ni-Cd battery. Features

• 3' ultra flexible hose with 8000 PSI working pressure • Industrial grease coupler • Air bleeder valve • One hour charger • Optimized air flow to maximize motor cooling • Heavy Duty carrying case

0401440

0401435

0401434

Part No. 0401433 0401434

0401436

0401437

Description Single Battery Included Two Batteries Included

Price /Each $249.00 299.99

Cordless Grease Gun Accessories Part No. 0401435 0401436 0401437 0401440

Description 12V Battery Charger 12V Spare Battery 12V Carry Strap 12V Battery Car Charger

Price /Each $49.25 81.20 10.90 49.05

Air Operated Grease Gun Air operated grease gun that features ergonomic handle and cylinder design. Uses 14 oz. grease cartridge. Has 1/4" NPT air inlet with an input pressure of 60-100 PSI. Rechargeable 12 volt cordless grease flow at up to 6000 PSI. Machined and hardened piston. Locking follower rod and accessible check valve. Uses standard 14 oz. grease cartridges or can be filled for bulk filler, optional nipple needed. Will dispense three 14 oz. tubes of grease on a single charge.

Part No. 58872

Price /Each $59.80

Mini Grease Gun Price /Each $259.75

Part No. 0489611

Same as above part number 0489611, however this kit includes 2 batteries. Price /Each $319.50

Part No. 0489612

Many Types of Greases Available on page 10-173.

10-172 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

A compact “tool box” size grease gun perfect for hard-to-reach jobs. Ideal for do-it-yourself automotive, industrial, farm, and RV applications. Corrosion resistant finish.

For use with 3 oz. grease tubes Part No.58885

Part No. 58873

Price /Each $23.39

10_pHyd_147-192.qxd

3/11/07

2:59 PM

Page 173

GREASE GUNS & GREASE

Heavy Duty Pistol Grip Grease Guns Convenient one hand operation. Uses 14 oz. grease cartridge or can be bulk filled. Non-slip, knurling on a heavy duty steel barrel.

Super Heavy Duty PIstol Grip Grease Gun This grease gun features 3-way loading: cartridge, suction or bulk. The variable stroke design delivers both high pressure and high volume. Includes one gun with a heavyduty 18" flexible hose with coupler and rigid 4" tube. (Lincoln part number is 1134.)

Part No. 0401781

Industrial Lubricants & Equipment

Grease

Grease Guns Cont.

#2 Megaplex XD-5 Moly Gray Lithium Complex Grease • Suitable for use in heavy equipment • Meets caterpillar and Terex requirements for 5% moly grease • 14 oz cartridge Vendor Price Part No. No. Description Qty. /Ea 0411137 1044178 MEGAPLEX XD-5 #2 14 oz Tube $6.49

Price /ea $47.86 ®

18" Flexible Extension Model

4" Rigid Model Part No. 58874 58875

Description

Price /Each

18" Flexible Extension Hose 4" Rigid

$26.96 26.19

Lever Action Grease Gun Will accommodate any standard 14 oz. grease cartridge. Features include electrostatic corrosion resistant finish and non-slip knurling for better grip.

Part No. 58876

Price /Each $14.14

Jam-proof toggle mechanism prevents binding or accidental bending of plunger. Precision fit and hardened plunger prevents lubricant bypass, resists scoring for longer life. Rugged cast iron pump head for strength and durability. Delivers fast, dependable lubrication. Follower rod locks into follower to force prime. Exclusive “Flip-Over” follower allows a superior seal for either cartridge or bulk loading applications. Tough, resilient and impervious to lubricant; Extra-heavy follower spring insures positive priming and uninterrupted pumping action. Part No. 0489615

Price /Each $29.50

Same as above part number 0489615, however this gun has an 18" whip hose extension. (Vendor # 1147)

Heavy-Duty Industrial Lever Action Grease Gun

Part No. 0489674

Made for the punishing day-in and day-out service required by industrial customers. Rugged, fully zinc plated finish. Dual port head cap with bulk loader fitting. Comes with 6" rigid extension and coupler. 14 oz. cartridge.

Part No. 58879

Super Heavy Duty Lever Grease Guns

Price /Each $42.25

Heavy Duty Bucket Pump

Price /Each $23.39

Fits 25-50 lb. buckets. Includes pump, drum cover, and 4' delivery hose. Perfect for transferring transmission fluids or heavier fluids.

Part No. 58878

Suction Gun A rugged tool designed for all-purpose draining and filling of clutches, differentials, and transmissions. Use with any type of non-corrosive lubricants. Needs no priming. 18 oz. capacity with 12" flexible hose.

Price /Each $43.85

The best general-purpose grease for a wide range of industrial applications. Added “moly” and graphite establish fine micron plating on all working surfaces. Use on bushings, slides, and U-joints.

Part No. 63295 63292 63293 63294

Description 14 oz. Cartridge 14 oz. Can 35 lb. Pail 7 lb. Pail

Price /Each $5.95 $6.15 129.54: 37.39

Super White™ MultiPurpose Grease A stable, water-resistant lithium base grease with white lubricating solids designed to meet NLGI #1.5 grade specs. Use for ball and roller bearings, sleeves, bushings and brake parts.

Part No. 63296 63297 63298

Description 14 oz. Cartridge 14 oz. Can 35 lb. Pail

Price /Each $6.34 7.08 143.94:

Lithium General Purpose Grease

Heavy-Duty Barrel Pump Part No. 58883

E-P Moly-Graph® MultiPurpose Lithium Grease

Price /Each $15.95

Fits 30-55 gallon drums. Pump delivers 10 ounces per stroke. Comes with standard bung bushing. Designed for efficient transfer of petroleum-based, non-corrosive fluids. Rugged, corrosive-resistant finish prevents rusting.

Part No. 58877

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price /Each $35.50

A versatile, lithium base grease designed for light-duty applications requiring long grease life. Will not break down or run out. Use with bushings, slides, cables, and motor bearings.

Part No. 63308 63309 63310

Description 14 oz Cartridge 14 oz. Can 35 lb. Pail

Price /Each $5.85 4.91 103.42:

10-173 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_147-192.qxd

3/11/07

3:00 PM

Page 174

GREASE & INDUSTRIAL LUBRICANTS Grease Cont. Industrial Lubricants & Equipment

®

Constant Velocity (C.V.) Joint Grease Extremely stable lithium base grease fortified with Molybdenum disulfide which greatly extends the life of CV Joints. Will not attack or run out of C.V. boot. Protects against rust and corrosion.

Part No. 63304

Description 4 oz. Tube

Hi-Temp Disc Brake Wheel Bearing Grease

Heavy Duty Drum Brake Wheel Bearing Grease

A very stable, aluminum complex grease made from highly refined base oils, with rust and oxidation inhibitors. Extends the parts' life and reduces down-time. Use on farm and transportation equipment.

Sodium-based grease for autos and trucks with drum brake systems and slow-speed industrial bearings. Economical, fibrous, and heat resistant grease with good adhesiveness.

Part No. 63300 63301 63303 63302

Description 14 oz. Cartridge 14 oz. Can 7 lb. Pail 35 lb. Pail

Price /Each $6.54 6.87 41.81 98.76:

Price /Each $5.51

#2 Dynalife GC-LB Red Lithium Multi Complex Grease • Suitable for wheel bearings in cars, trucks, and buses • Contains an EP additive and tackifier • 14 oz cartridge

Sta-Plex® Premium Red Grease A superior multi-purpose, NLGI #2 Certified lithium complex grease known for its versatility and high-temperature lubrication. Use on equipment exposed to severe operational conditions.

• Multi-Purpose EP Grease • Suitable for high temperatures, corrosive environments and exposure to water • 14 oz cartridge

A high quality calcium sulfonate based, multipurpose grease that performs well under a temperature range of 0° to 550°F. Highly water insoluble and washout resistant. Fully fortified with additives to protect against rust, oxidation, extreme pressure, and wear. A recommended leader for medium slow to medium high speed bearings and greased chassis points. NLGI Grade 2. USDA H2. 3 oz. cartridge with 2 per blister card. 3 oz cartridges for use with Fastenal part # 58873 (mini grease gun)

Price /Ea $6.89

Description 14 oz. Cartridge 35 lb. Pail

Boat Trailer Wheel Bearing Grease

Miscellaneous Industrial Lubricants

A distinctive blue, tacky grease with natural water resistance. Resists washout under the most severe water conditions. For marine use, including trailer wheel bearings, steering quadrants, blocks, and slides.

Part No. 63286 63287 63288

Price /Each $7.96 236.57:

Description 14 oz. Cartridge 14 oz. Can 35 lb. Pail

Price /Each $6.09 7.31 105.27:

A high-performance synthetic grease with a non-melting thickener. Exceptional anti-wear properties at temperatures up to 600°F. Use on fan and oven bearings and papermachine dryers. 14 oz. cartridge.

Hydraulic Fluid 5 Gallon Pail Long Life Hydraulic Fluid • High quality antiwear hydraulic oil • Excellent oxidation stability and water separation • Long oxidation life Part No. 0411095 0411096

Ball and Roller Bearing Hi-Temp Grease

Vendor No. 1040359 1040370

Description 32-5 GAL PAIL 68-5 GAL PAIL

Price /Ea $83.79 83.79

5 Gallon Pail High Dielectric Strength Hydraulic Fluid MV32

Specially-treated petroleum base stocks, rust and oxidation inhibitors and extreme pressures additives with an aluminum complex thickener. Use for heavy-loaded bushings. 14 oz. cartridge.

Part No. 63313

Price /Each $10.49

Part No. 58885

Permatherm™ High Temperature Synthetic Grease Part No. 63306 63307

Price /Each $4.99 23.24 88.28:

Marine and Trailer Wheel Bearing Grease

®

®

Description 14 oz. Can 7 lb. Pail 35 lb. Pail

#2 Omniguard Tan/Brown Calcium Complex Grease

Vendor Part No. No. Description Qty. 0411135 1044208 OMNIGUARD #2 14 oz Tube

Vendor Price Part No. No. Description Qty. /Ea 0411136 1044158 DYNALIFE GC-LB#2 14 oz Tube $4.89

Part No. 63289 63291 63290

Part No. 63312

Price /Each $7.14

10-174 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Description 14 oz. Cartridge

Price /Each $24.34

• High viscosity index • Excellent low and high temperature performance • Long oxidation life

Part No. 0411097

Vendor No. 1040352

Description MV32-5 GAL PAIL

Price /Ea $90.49

10_pHyd_147-192.qxd

3/11/07

3:00 PM

Page 175

INDUSTRIAL LUBRICANTS Miscellaneous Industrial Lubricants Cont.

• Medium weight hydraulic oil for use in Hydraulic systems and fluid drive units • Blended using a high quality paraffinic base oil with antirust, anti-oxidation, antifoam, anti-wear and seal swell additives • May be added to existing fluids • Not for use in hydraulic brakes

®

CONOCO Ecoterra Hydraulic Fluid 32 • Outstanding oxidation stability • Environmentally friendly, zinc free • Inherently biodegradable

Vendor Price Part No. No. Description Size /Ea 0411098 1040839 Ecoterra Hydraulic Fluid 32 5 Gal. $99.19

Multi-Way Machine Lubricant

Part No. 63339 63340

Size 1 Quart Bottle 1 Gallon Bottle

®

Air Tool Oil A special lubricant designed for pneumatic tools. Protects against rust and corrosive attack from water and corrosive materials contained in compressed air. Use for pneumatic wrenches, drills, hammers, saws and grinders. Price /Each $7.92 24.23

• Premium-quality, partsynthetic motor oil for passenger cars, vans, light trucks, and SUVs. • Meets or exceeds APR Service SM • Energy Conserving for improved fuel economy

• Multifunctional fluid for transmission, final drive, wet brakes, and hydraulic systems

Vendor Price Part No. No. Description Size /Ea 0411105 9111000 Multi-way Lubricant 68 5 Gal. $102.79 0411106 9116000 Multi-way Lubricant 220 5 Gal. 103.89

Part No. 0411109

Vendor No. 1040631

Size 5 Gal. Pail

Price /Ea $99.19

• Extreme-pressure gear oil that resists foaming and has long service life • Long oxidation life.

Description Gear Oil 220 Gear Oil 460

CatOil Compressor and Air Tool Lubricant

Price Size /Ea 5 Gal. $106.59 5 Gal. 106.59

®

Gear Oil Bottle

Description 85W90 Gear Oil

CatOil Compressor & Air Tool Lubricant is the only non-foaming lubricant that conditions and protects gaskets, seals, o-rings and metal. It's anti-friction, anti corrosive properties will: CatOil Compressor & Air Tool Lubricant will not build up and create a residue that will attract airborne contaminant's. It also protects your compressors and air tools against condensation. Even in extremely cold weather anti-freeze is not necessary. Use CatOil Compressor & Air Tool Lubricant according to your compressor and air tool manufacturers' instructions.

• Decreases Operating Temperatures • Decreases Fuel/power Consumption • Decreases Maintenance and Repair Costs

• APR/GL-4 Multipurpose gear oil • Low pour point and high temperature properties to provide lubrication over a wide temperature range • Contains anti-rust and anti-wear EP additives to provide corrosion protection in drives and hyoid gears Part No. 0604162

Part No. 0411145 0411146 0411147

Vendor No. 1042939 1042954 1042106

Description 5W20 Motor Oil 5W30 Motor Oil 10W30 Motor Oil

Price Pkg. Qty. /Qt. 12 Qts $4.79 12 Qts 4.69 12 Qts 4.65

Kendall Super-D3 Diesel Engine Oil

Gear Oil

Vendor Part No. No. 0411107 1040309 0411108 1040580

Price /Each $6.46

Description 15 oz. Bottle

Kendall Synthetic Blend Motor Oil

Powertran Fluid

• Excellent control of lubricant run-off, excellent stick/slip prevention • Tested and approved by Bijur and Cincinnati Machine

Part No. 63341

• Premium-quality universal fleet engine oil for onand off-highway diesel equipment. • Can also be used in passenger cars and light trucks • Meets of exceeds APR CI-4 Plus • Outstanding soot control • SAE15W-40 Engine Oil Part No. 0411148

Vendor No. 1043442

Pkg. Qty. 6 Gals

Price /Gal. $17.99

®

Universal 2 Cycle Oil • Specially formulated for air cooled and small horsepower engines • Produces minimal smoke • Protects against rust and high heat • Minimizes plug fouling, port plugging, ring stretching, carbon deposits, and piston seizure

Size 32 oz.

Price $6.42

Part No. 0286070 0286031 0286125 0286545

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Size 4 oz. 1 qt. 1 gallon 5 gallons

Price /Each $6.29 24.95 74.95 299.00

Part No. 0123323 0123324

Size 8 oz Bottle 15 oz Bottle

Price /Each $3.70 $6.99

10-175 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Industrial Lubricants & Equipment

Hydraulic & Jack Oil

10_pHyd_147-192.qxd

3/11/07

3:00 PM

Page 176

OIL AND GREASE PUMPS Oil and Grease Pumps Industrial Lubricants & Equipment

Air Operated Oil Pumps • For use with a variety of different oils (gear, hydraulic, machine, cutting, etc.) • Easy maintenance, constructed with 50% fewer parts than most comparable pumps • Reliable operation, backed by five year warranty • Low noise, only 80-dbs (2"), 85-dbs (3") • Bung adaptor included • Stub style pump - Female threaded inlet allows pump to be mounted independent of source tank

Air Motor Size 3.0 3.0 3.0

Cont. Size Stub 16 Gallon 55 Gallon

Pump Ratio 5.1 5.1 5.1

Max. Flow GPM 6 6 6

Out Pressure Max. PSI 500 500 500

Air Inlet NPT(F) 1/4 1/4 1/4

Fluid Inlet /Outlet NPTF 11/2 -1/2 11/2 -1/2 11/2 -1/2

Vendor No. LM2305A-11 LM2305A-31 LM2305A-41

Ship Wt. (lbs) 16 29 29

Part No. 0470136 0470137 0470138

Price /Each $899.00 949.00 999.00

Ship Wt. (lbs) 37

Part No. 0470142

Price /Each $1195.50

Gear Oil Pump Package with Meter Includes: Pump, pint/gallon meter, control handle, drum cover, six feet of hose and roller dolly. Container not included.

Air Motor Size 2.0

Pump Ratio 3:1

Cont. Size 16 Gallon

Max. Flow GPM 6

Out Pressure Max. PSI 500

Air Inlet NPT(F) 1/4

Fluid Inlet /Outlet NPTF 3/4-1/2

Vendor No. LP2100-1

Grease Pump Packages • Part numbers 0470139 and 0470140 include: pump, follower plate, drum cover, air coupler/connector, six foot hose, and high-pressure gun. Part number 0470141 lacks the gun and follower plate • Perfect for all multi-purpose greases • Easy installation • Reliable operation, backed by industry leading five year warranty • Low noise, only 80-dbs (2"), 85-dbs (3") • Roller dolly included with 0470140 Air Motor Size 2.0 2.0 3.0

Size 5 Gal./35 lb. 16 Gal./120 lb. 55 Gal./400 lb.

Max. Lbs. /Min. 9.0 9. 7.5

Vendor No. LP2002-1-B LP2006-1-B LP3005-1

Pump Ratio 50:1 50:1 50:1

Ship Wt. (lbs) 24.0 37.0 53.0

0470139

0470141 Price /Each $1064.41 1251.87 1323.55

Part No. 0470139 0470140 0470141

Metallic Air Operated Diaphragm Pumps • Self-priming • No-stall air motor design • All bolted construction-no leaks • Quick dump exhaust valve eliminates air motor icing • Wide variety of housing and diaphragm materials • Made in the USA • Manufactured to ISO 9001 Quality Standards

0470127 thru 0470131

GPM Flow Typical 13 13 13 35 35 35 85 85 100 125 125

Inlet /Outlet FNPT 1/2" 1/2" 1/2" 1" 1" 1" 1-1/2" 1-1/2" 1-1/2" 2" 2"

Max. Flow GPM 13 13 13 35 35 35 90 90 100 170 170

Max. CFM 20 20 20 40 40 40 112 112 110 125 125

Max. Pressure 100 100 100 120 120 120 122 123 120 124 125

10-176 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Pump Body Material Aluminum Aluminum Stain. Steel Stain. Steel Aluminum Aluminum Aluminum Stainless Aluminum Aluminum Stainless

Diaphragm Material Nitrile Teflon Teflon Teflon Nitrile Teflon Teflon Teflon Nitrile Teflon Teflon

Air Inlet NPT 1/4 1/4 1/4 1/4 1/4 1/4 1/2 1/2 1/2 3/4 3/4

Susp. Solids Max. Dia. 3/32 3/32 3/32 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4

0470122 thru 0470125

Weight 8.4 8.4 14.6 36 19 19 51 84 51 64 188

Vendor No. PD05P-AAS-PGG PD05P-AAS-STT PD05P-ASS-STT 666101-344-C 666100-322-C 666100-344-C 66615A-244-C 66615B-244-C 666150-322-C PD20A-AAS-STT PD20C-ASS-STT

0400020 thru 0400022

Part No. 0470122 0470123 0470125 0470129 0470127 0470128 0400016 0400018 0470131 0400020 0400022

Price /Each $570.52 856.45 1290.18 1739.85 722.50 1025.00 1655.00 3159.00 974.08 1969.75 4975.00

10_pHyd_147-192.qxd

3/11/07

3:00 PM

Page 177

OIL AND GREASE PUMPS Industrial Lubricants & Equipment

Oil and Grease Pumps Cont.

Non-Metallic Air Operated Diaphragm Pumps Polypropylene pumps offer wide material compatibility (acids, alkalis, stabilizers,aliphatic substances, etc.), high fatigue endurance, and superior abrasion resistance. Flow rate depends on air pressure and fluid viscosity. Maximum flow rates are achieved at 100 PSI for 1/2" pumps and 120 PSI for others. Verify materials of construction with Chemical Resistance Chart listed in the pump section.

• Self-priming (15 ft. wet; 10 ft. dry) • No-Stall Motor Design • Maximum Temperature: 150°F Max. Flow GPM 4.6 13 90 47 100

Max. CFM 100 100 120 100 128

0470113

Operating Pressure (PSI) 100 100 100 100 120

Pump Body Material Polyproplene Polyproplene Polyproplene Polyproplene Polyproplene

Diaphragm Material Teflon Teflon Santoprene Teflon Teflon

Air Inlet NPT 1/4 1/2 1/2 1 1/2

Inlet /Outlet FNPT 3/8 -1/4 1/2 1/2 1 1-1/2

0470117 thru 0470121

Description Threaded Threaded Threaded Flange Flange

Susp. Solids Max. Dia. 1/32 3/32 3/32 1/8 1/4

0400012

Weight 4.1 7.2 7.2 20.2 108

Part No. 0470113 0470117 0470118 0470121 0400012

Price /Each $349.90 662.40 499.00 1325.00 2635.00

Diaphragm Drum Packages • Includes: Pump, Bung Adapter, Air Shut-Off, Siphon Tube, Weather Seal, and Base • Available in polypropylene, aluminum, and stainless steel • Steel body materials for optimum compatibility • Stall-free operation • Bolted construction • 5-year warranty GPM 11 11 11

Body Material Polypropylene Aluminum Stain. Steel

Ball/Diaphragm Material Teflon Polypropylene Teflon

Seat Polypropylene Polypropylene Stain. Steel

Fluid Service Mild Acid Oil Solvent

Air Inlet NPT 1/4 1/4 1/4

Vendor No. DA005-PPTT-2-A DA005-APNN-2-A DA005-SSTT-2-A

Part No. 0470132 0470133 0470135

Weight 8.2 8.2 17

Price /Each $785.50 749.00 1499.00

Waste Oil Pump Package Includes: 1" Diaphragm pump, wall mount bracket, 1" pump inlet/outlet hose assembly, airline filter/regulator, 1/4" air inlet hose, and fluid coupler.

GPM 17

Max. Flow GPM 35

Max. Flow CFM 40

Fluid Inlet /Outlet 1"

Vendor No. 612999-4

Ship Wt. (lbs) 30

Part No. 0470143

Price /Each $1325.00

Meters PRESET METER: Automatically shuts off when set quantity of fluids is delivered and meter indicator returns to zero. Totalizer registers to 9,999. Part Number 0470144. ELECTRONIC METER: Designed for precise reliable measurements (pints and gallons). Fast reset, precise, totalizes, and is lightweight. Part Number 0470145.

0470144

Max. Flow GPM 4 4

Operating Pressure (PSI) 1000 1000

Fluid Inlet NPTF 1/2 1/2

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Fluid Outlet 1/2 Non-Drip Tip 1/2 Non-Drip Tip

Vendor No. 635390-2 635364

Ship Wt. (lbs) 5.0 6.8

0470145

Part No. 0470144 0470145

Price /Each $589.00 925.00

10-177 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_147-192.qxd

3/11/07

3:00 PM

Page 178

LUBE METERS AND THERMOPLASTIC D.O.T TUBING Tube O.D. - 3/16

Lube Meters Hydraulic/Pneumatic Fleet

Part No. 0450501

Vendor No. NT10003

Color BK

Coil Lgth. *1000

Price /Ft $0.48

Tube O.D. - 1/4

Electronic Lube Meters • Flow Range: 0.25 gpm to 6.0 gpm • Operating Pressure Range: 5 to 1500 PSI • Operating Temperature Range: -10 to +110° F • Accuracy: +/-.05% These meters are designed specifically to dispense typical fluids such as motor oils, gear oils, automatic transmission fluids, and pure antifreeze. Features include: accuracy, field replaceable batteries with low battery indicator, shock resistant housings and more.

Price /ea $545.00

Part No. 0401782

Nozzle & tip configuration is a flex straight hose with automatic tip.

Color Black Red Blue GN YW OR WH BR BK BU WH BK RD WH

Vendor No. NT10004 NT10004 NT10004 NT10004 NT10004 NT10004 NT10004 NT10004 NT10004 NT10004 NT10004 NT10004 NT10004 NT10004

Coil Lgth. 100 100 100 100 100 100 100 100 500 500 500 *1000 *1000 *1000

Price /Ft $0.50 0.50 0.50 0.50 0.50 0.50 0.51 0.50 0.42 0.42 0.42 0.41 0.41 0.41

Color Black BK BK

Vendor No. NT10005 NT10005 NT10005

Coil Lgth. 100 500 *1000

Price /Ft $0.49 0.43 0.41

Color Black Red Blue GN YW OR WH BK RD BU GN OR WH BK

Vendor No. NT10006 NT10006 NT10006 NT10006 NT10006 NT10006 NT10006 NT10006 NT10006 NT10006 NT10006 NT10006 NT10006 NT10006

Coil Lgth. 100 100 100 100 100 100 100 500 500 500 500 500 500 *1000

Price /Ft $1.24 1.24 1.24 1.24 1.24 1.24 1.24 1.05 1.05 1.05 1.05 1.05 1.05 0.99

Part No. 450025-131280 0450539 0450540 0450541 0450543 0450544 450026-131280 0450545

Color Black Red Blue GN OR WH BK RD

Vendor No. NT10008 NT10008 NT10008 NT10008 NT10008 NT10008 NT10008 NT10008

Coil Lgth. 100 100 100 100 100 100 500 500

Price /Ft $1.70 1.70 1.70 1.70 1.70 1.70 1.33 1.33

0450546 0450547 450027-131280

BU GN BK

NT10008 NT10008 NT10008

500 500 *1000

1.33 1.33 1.30

Color Black Red Blue GN WH BK WH

Vendor No. NT10010 NT10010 NT10010 NT10010 NT10010 NT10010 NT10010

Coil Lgth. 100 100 100 100 100 *250 *250

Price /Ft $1.95 1.95 1.95 1.95 1.95 1.88 1.88

Color Black BK

Vendor No. NT10012 NT10012

Coil Lgth. 100 *250

Price /Ft $2.63 2.47

Part No. 450016-131280 0450183 0450184 0450185 0450186 0450187 0450188 0450192 450017-131280 0450191 0450195 450018-131280 0450197 0450502

Tube O.D. - 5/16 Part No. 450019-131280 450020-131280 450021-131280

Tube O.D. - 3/8 Price /ea $499.00

Part No. 0401783

Nozzle & tip configuration is a 30° rigid spout with automatic tip.

Thermoplastic D.O.T. Tubing NT100 Nylon 11 SAE J844 Type A & B DOT FMVSS 571.106 • Typical Application: Air brake systems except where temperatures exceed +200°F or where battery acid can drip on tubing. • Construction: Core= NYLON; Braid= POLYAMIDE FIBER (3/8" and larger sizes only); Jacket=NYLON. • Temperature Range: -40°F to +200°F (-40°C to +93°C) • Available Colors: White, black, yellow, orange, blue, red, green, gray. Refer to current price list for availability of colors. • Contains: Ultra-Violet stabilizer in all colors. • Note: 3/16", 1/4" and 5/16" are SAE J844 Type A (not reinforced); 3/8", 1/2", 5/8" and 3/4" are SAE J844 Type B (reinforced). Part No. NT10002 NT10004 NT10005 NT10006 NT10008 NT10010 NT10012

Max. Work Min. Burst Min. Bend Pressure Pressure Radius Lbs./100 Tube O.D. Tube Wall PSI 70ºF PSI 70ºF 70°F ft. Coil Lgth. **1/8 (.125) .023 150 1000 .375" .4 100,500, * 1000 1/4 (.250) .040 150 1200 1.0" 1.2 100,500,* 1000 5/16 (.312) .040 150 1000 1.25" 1.8 100,500,* 1000 3/8 (.375) .062 150 1400 1.5" 2.9 100,500,* 1000 1/2 (.500) .062 150 950 2.0" 3.8 100,500,* 1000 5/8 (.625) .092 150 900 2.5" 6.8 100, 250 3/4 (.750) .092 150 800 3.0" 8.4 100, 250

Tube O.D. - 1/8 Part No. 450013-131280 450014-131280

Color Black BK

Vendor No. NT10002 NT10002

**1/8" NT1002 tubing does not meet DOT standards

Coil Lgth. 100 500

Price /Ft $0.26 0.18

Part No. 450022-131280 0450521 0450522 0450523 0450524 0450525 0450526 450023-131280 0450527 0450528 0450529 0450531 0450532 450024-131280

Tube O.D. - 1/2

Tube O.D. - 5/8 Part No. 450028-131280 0450557 0450558 0450559 0450562 450029-131280 0450568

Tube O.D. - 3/4 Part No. 450030-131280 450031-131280

10-178 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

10_pHyd_147-192.qxd

3/11/07

3:01 PM

Page 179

DOT PUSH-TO CONNECT FITTINGS DOT Push-to-Connect Fittings

DOT Male Elbow

Specifications: • Body: Nylon 6.6 • Seal: Low Temp Nitrile • Pressure: 275psi, 28"HG • Temp Range: -20°F to 225°F • Tube Support: Brass • Meet all applicable requirements of the D.O.T. FMVSS 106 specification. • Designed for use on all pneumatic circuits other than air brake assemblies between the frame and the axle or between towed and towing vehicle. • Use in conjunction with D.O.T. rated tubing.

Part No. 0451629 0451585 0451579 0451590 0451618 0451622 0451615 0451569 0451572 0451566

Vendor No. 3109 04 11DOT 3109 56 11DOT 3109 56 14DOT 3109 56 18DOT 3109 60 14DOT 3109 60 18DOT 3109 60 22DOT 3109 62 14DOT ‘3109 62 18DOT 3109 62 22DOT

Tube O.D. 5/32 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2

NPT Size 1/8 1/8 1/4 3/8 1/4 3/8 1/2 1/4 3/8 1/2

Pkg. Qty. 10 10 10 10 10 10 10 10 10 10

Price $4.86 3.86 4.34 10.82 9.86 10.49 10.82 11.50 11.53 11.67

Pkg. Qty. 10 10 10 10 10 10

Price $6.62 5.13 4.23 5.44 8.62 8.75

DOT Union Elbow Part No. 0451632 0451576 0451612 0451563

DOT Straight Female Connector

Vendor No. 3102 04 00DOT 3102 56 00DOT 3102 60 00DOT 3102 62 00DOT

Tube O.D. 5/32 1/4 3/8 1/2

Pkg.Qty. 10 10 10 10

Price $3.92 4.48 8.31 9.35

Part No. 0400284 0400285 0400286 0400287 0400288 0400289

DOT Union Tee

Part No. 0451627 0451575 0451611 0451562

• Nickel Plated Brass

Vendor No. 3104 04 00DOT 3104 56 00DOT 3104 60 00DOT 3104 62 00DOT

Tube O.D. 5/32 1/4 3/8 1/2

Pkg. Qty. 10 10 10 10

Price $5.22 5.88 8.48 13.56

Vendor No. 3114 04 14DOT 3114 55 11DOT 3114 56 11DOT 3114 56 14DOT 3114 60 14DOT 3114 60 18DOT

Tube O.D. 5/32 3/16 1/4 1/4 3/8 3/8

NPT Size 1/4 1/8 1/8 1/4 1/4 3/8

DOT Bulkhead Union

DOT Straight Union Part No. 0400305 0451610

Vendor Part No. 0451628 0451606 0451577 0451613 0451564

No. 3106 04 00DOT 3106 55 00DOT 3106 56 00DOT 3106 60 00DOT 3106 62 00DOT

Tube O.D. 5/32 3/16 1/4 3/8 1/2

Pkg. Qty. 10 10 10 10 10

Price $3.47 5.43 3.86 6.32 10.34

Vendor No. 3116 56 00DOT 3116 60 00DOT

Tube O.D. 1/4 3/8

Pkg. Qty. 10 10

Price $5.46 9.91

DOT Male Connector • Nickel Plated Brass

DOT Male Branch Tee • Nickel plated brass base with nylon body

Part No. 0451633 0451584 0451578 0451589 0451617 0451621 0451614 0451565

Vendor No. 3108 04 14DOT 3108 56 11DOT 3108 56 14DOT 3108 56 18DOT 3108 60 14DOT 3108 60 18DOT 3108 60 22DOT 3108 62 22DOT

Tube O.D. 5/32/4 mm 1/4 1/4 1/4 3/8 3/8 3/8 1/2

NPT Size 1/4 1/8 1/4 3/8 1/4 3/8 1/2 1/2

Pkg. Qty. 10 10 10 10 10 10 10 10

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price $9.88 5.76 6.13 11.05 10.05 11.22 12.96 15.91

Part No. 0400290 0400291 0400292 0400293 0400294 0400295 0400296 0400297 0400298 0400299 0400300 0400301 0400302 0400303

Vendor No. 3115 04 11DOT 3115 04 14DOT 3115 55 11DOT 3115 55 14DOT 3115 56 11DOT 3115 56 14DOT 3115 56 18DOT 3115 60 11DOT 3115 60 14DOT 3115 60 18DOT 3115 60 22DOT 3115 62 14DOT 3115 62 18DOT 3115 62 22DOT

Tube O.D. 5/32 5/32 3/16 3/16 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2

NPT Size 1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/8 1/4 3/8 1/2 1/4 3/8 1/2

Pkg. Qty. 10 10 10 10 10 10 10 10 10 10 10 10 10 10

Price $2.31 3.81 3.08 4.69 2.94 2.94 3.90 5.64 4.16 5.19 7.69 7.07 7.26 7.40

10-179 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hydraulic/Pneumatic Fleet

• Nickel plated brass base with nylon body

10_pHyd_147-192.qxd

3/11/07

3:01 PM

Page 180

DOT PUSH-TO-CONNECT FITTINGS DOT Push-to-Connect Fittings Cont.

Large DOT Fitting Kit

Hydraulic/Pneumatic Fleet

DOT Union “Y” • Nylon Body • Tube to Tube

Part No. 0451640 0451582 0451625

Part No. 0400315

Tube O.D. x Tube O.D. 5/32/4 mm x 5/32/4 mm 1/4 x 1/4 3/8 x 3/8

Vendor No. 3140 04 00DOT 3140 56 00DOT 3140 60 00DOT

Pkg. Qty. 10 10 10

Price $5.22 5.88 10.62

DOT Plug-In Elbow • Nylon Body

Vendor No. 3182 56 00DOT

Part No. 0400323

O.D. 1/4

Pkg. Qty. 10

Price $1.88

O.D. 1/4

Pkg. Qty. 10

Price $4.94

DOT Plug-In Union Tee • Nylon Body

Part No. 0400325

Vendor No. 3188 56 00DOT

Vendor No. 3150 00 06 68

Description DOT Large Fit Kit

O.D.

Description 3/8"OD x 1/4"NPT DOT Male Connector PTC 3/8"ODx 3/8"NPT DOT Male Connector PTC 1/4"ODx 3/8"NPT DOT Male Connector PTC 1/4"OD x 1/4"NPT DOT Male Connector PTC 1/4"OD x 1/8"NPT DOT Male Connector PTC 1/2"OD x 3/8"NPT DOT Male Connector PTC 1/2"OD x 1/4"NPT DOT Male Connector PTC 3/8OD DOT Nylon Body Union Tee P-T-C 1/4" Tube OD DOT Union Tee Nylon Push-to-Connect 1/4OD x 1/8NPT DOT NklPltd Brass Male Branch Tee P-T-C 1/2OD DOT Nylon Body Straight Union P-T-C 3/8OD DOT Nylon Body Straight Union P-T-C 1/4" Tube OD DOT Union Nylon Push-to-Connect 1/4OD DOT Nylon Body Tube to Tube Bulkhead Union P-T-C 3/8OD DOT Nylon Body Elbow Union 1/4" Tube OD DOT Union Elbow Nylon Push-to-Connect 1/4"ODx3/8"NPT DOT Male Elbow Nylon Push-to-Connect 1/4"ODx1/4"NPT DOT Male Elbow Nylon Push-to-Connect 1/4"ODx1/8"NPT DOT Male Elbow Nylon Push-to-Connect 1/2ODx3/8NPT DOT NklPltd Brass Male Elbow P-T-C 3/8ODx3/8NPT DOT NklPltd Brass Male Elbow P-T-C 3/8ODx1/4NPT DOT NklPltd Brass Male Elbow P-T-C

Pkg. Qty. 1 Part No. 0400298 0400299 0400296 0400295 0400294 0400302 0400301 0451611 0400252 0451584 0451564 0451613 0400257 0400305 0451612 0400235 0400276 0400275 0400274 0451572 0451622 0451618

Price $250.13 Qty. 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Quick Connect Air Brake®

DOT Tubing • Ideal for use in transportation and instrumentation markets and pneumatic accessories • Designed to replace rubber and metal tubing • Offers superior resistance to oil, grease, gasoline, fuel, salts, moisture and chemicals Part No. 0431199 0431201 0431202 0431203

Vendor No. 1094P04 01DT 1094P56 01DT 1094P60 01DT 1094P62 01DT

Color Black Black Black Black

I.D. .124 .210 .313 .438

Tube O.D. 5/32 1/4 3/18 1/2

Plugs, Pressure (Nylon) Quick Connect Air Brake® fittings used with NT100 Nylon Tubing - SAEJ844. Meets DOT FMVSS 571.106 and SAE J1131 air brake system performance requirements. Pkg. Qty. 100 100 100 100

Price /Roll $37.90 55.72 120.71 172.94

Vendor No. 3150 00 06 69

Description DOT Quick Repair Kit

Part No. 0441574 0441575 0441576

Price /Each $0.72 1.01 1.05

Encapsulated Cartridge

DOT Quick Repair Kit

Part No. 0400316

Tube O.D. 1/4 3/8 1/2

O.D.

Pkg. Qty. 1

Price $50.25

Tube O.D. 1/4 3/8 1/2 5/8

Part No. 0441579 0441580 0441581 0441582

Price /Each $4.48 4.98 5.96 9.15

Union

Contains the following DOT fittings: Description 1/4NPT x 1/8NPT Brass Female to Male Expander 3/8NPT x 1/4NPT Brass Female to Male Expander 3/8ODx3/8NPT DOT Nickel plated Brass Male Elbow P-T-C 1/4"ODx1/4"NPT DOT Male Elbow Nylon Push-to-Connect 3/8OD DOT Nylon Body Straight Union P-T-C 1/4" Tube OD DOT Union Nylon Push-to-Connect 1/4"OD x 3/8"OD DOT Tube Reducer P-T-C Tube Cutter

10-180 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Part No. 0451681 0451712 0451622 0400275 0451613 0400257 0400320 –

Qty. 1 1 1 1 2 2 2 1

Tube O.D. 5/32 1/4 3/8 1/2 5/8

Part No. 0441584 0441585 0441586 0441587 0441588

Price /Each $7.34 8.47 9.64 11.72 15.90

10_pHyd_147-192.qxd

3/11/07

3:01 PM

Page 181

QUICK CONNECT AIR BRAKE® Male Run Tee

Male Elbow 90°

Union Tee

Tube O.D. 1/4 3/8 1/2

Part No. 0441589 0441590 0441591

Price /Each $12.52 15.16 17.92

Union Elbow

Tube O.D. 5/32 5/32 3/16 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8

Tube O.D.

Part No.

Price /Each

1/4 3/8 1/2

0441592 0441593 0441594

$8.43 11.27 15.98

MPT 1/8 1/16 1/8 1/8 1/4 3/8 1/4 1/8 3/8 1/2 3/8 1/4 1/2

Part No. 0441619 0441620 0441621 0441622 0441624 0441626 0441628 0441630 0441632 0441634 0441636 0441638 0441640

Price /Each $5.15 5.25 5.63 5.91 6.44 7.62 8.79 9.58 9.16 11.47 13.15 14.39 13.33

1/2 3/8

0441642 0441644

15.36 13.90

Swivel Male Elbow 90°

Tube O.D. 1/4 1/4 3/8 3/8 3/8

FPT 1/8 1/4 1/4 1/8 3/8

Part No. 0441595 0441596 0441597 0441598 0441599

Price /Each $7.15 7.42 7.55 11.72 7.63

1/2 1/2

1/4 1/2

0441601 0441602

9.43 12.65

Male Connector

MPT 1/8 1/4 3/8 1/4 1/8 3/8 1/2 3/8 1/4 1/2 1/2 3/8

Part No. 0441623 0441625 0441627 0441629 0441631 0441633 0441635 0441637 0441639 0441641 0441643 0441645

Price /Each $8.04 8.76 10.17 11.38 12.28 11.83 13.48 15.67 16.00 17.75 18.25 18.45

Female Elbow

MPT 1/8 1/4 1/4 3/8 1/2 3/8

Part No. 0441654 0441656 0441658 0441660 0441662 0441663

Price /Each $10.18 10.62 11.78 12.08 18.51 18.08

Swivel Male Run Tee

Tube O.D. 1/4 1/4 3/8 3/8 1/2 1/2 1/2

Female Connector Tube O.D. 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8

Tube O.D. 1/4 1/4 3/8 3/8 3/8 1/2

MPT 1/8 1/4 1/4 3/8 3/8 1/4 1/2

Part No. 0441655 0441657 0441659 0441661 0441664 0441665 0441666

Price /Each $10.86 12.58 14.85 17.95 19.67 19.30 22.93

Part No. 0441668 0441670 0441672 0441675 0441677 0441679 0441681

Price /Each $9.88 10.23 11.49 11.81 16.10 17.17 20.04

Male Branch Tee

Tube O.D. 1/4 1/4 3/8 3/8 1/2 1/2 1/2

MPT 1/8 1/4 1/4 3/8 3/8 1/4 1/2

Swivel Male Branch Tee Tube O.D. 5/32 5/32 3/16 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4

MPT 1/8 1/16 1/8 1/8 1/4 3/8 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 1/2

Part No. 0441603 0441604 0441605 0441606 0441607 0441608 0441609 0441610 0441611 0441612 0441613 0441614 0441615 0441616 0441617 0441618

Price /Each $3.64 3.95 5.00 3.40 5.27 6.60 12.32 6.80 8.90 9.07 9.47 11.25 14.44 11.83 11.48 15.74

Tube O.D. 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

FPT 1/8 1/4 1/4 1/8 3/8 3/8 1/4 1/2

Part No. 0441646 0441647 0441648 0441649 0441650 0441651 0441652 0441653

Price /Each $7.31 10.60 10.73 16.13 12.09 13.04 13.28 13.90

Tube O.D. 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2

MPT 1/8 1/4 1/4 1/8 3/8 3/8 1/4 1/2

Part No. 0441669 0441671 0441673 0441674 0441676 0441678 0441680 0441682

Price /Each $11.19 12.83 15.65 17.36 16.69 21.50 21.73 23.12

10-181 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hydraulic/Pneumatic Fleet

Quick Connect Air Brake® Cont.

10_pHyd_147-192.qxd

3/11/07

3:01 PM

Page 182

QUICK CONNECT & BRASS AIR BRAKE FITTINGS Hydraulic/Pneumatic Fleet

Quick Connect Air Brake® Cont.

Insert

Swivel Male Elbow 45°

Female Bulkhead Union

Tube O.D. 1/4 3/8 1/2

FPT 1/4 3/8 1/2

Part No. 0441683 0441684 0441685

Price /Each $11.50 15.97 19.87

Quick Connect Bulkhead Union

Tube O.D. 1/4 3/8 1/2 5/8

Part No. 0441686 0441687 0441688 0441689

Price /Each $10.62 14.47 16.64 20.90

Tube O.D. 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2

MPT 1/8 1/4 1/4 1/8 3/8 3/8 1/4 1/2

Price /Each $8.42 10.17 12.02 12.32 16.34 16.75 15.12 16.48

Part No. 0441691 0441693 0441695 0441697 0441699 0441702 0441704 0441706

Brass Air Brake Fittings For Nylon Tubing Brass air brake fittings for nylon tubing are compression style, flareless fittings that meet SAE and DOT specifications.

Tube O.D. 1/4 3/8 1/2 5/8 3/4

Weatherhead Price /Each $0.19 0.21 0.33 0.75 0.91

Utility Price Part No. /Each 67765 $0.18 67766 0.19 67767 0.31 67768 0.62 67769 0.84

Weatherhead Price /Each $1.95 2.55 3.83 8.49 14.77

Utility Price Part No. /Each 67812 $1.90 67813 2.49 67814 3.79 67815 8.46 67816 11.56

Vendor No. 1484X4 1484X6 1484X8 1484X10 1484X12

Part No. 440755-131280 440756-131280 440757-131280 440758-131280 440759-131280

Vendor No. 1462X4 1462X6 1462X8 1462X10 1462X12

Part No. 440760-131280 440761-131280 440762-131280 440763-131280 440764-131280

Union

Tube O.D. 1/4 3/8 1/2 5/8 3/4

Female Connector

Sleeve Male Elbow 45°

Utility Tube O.D. 1/4 3/8 1/2 5/8 3/4

Tube O.D. 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 3/4

MPT 1/8 1/4 1/4 1/8 3/8 1/2 3/8 1/4

Part No. 0441690 0441692 0441694 0441696 0441698 0441700 0441701 0441703

Price /Each $6.98 12.21 9.55 10.70 11.25 12.36 11.13 11.35

1/2 1/2 1/2

0441705 0441707 0441709

11.93 15.14 21.39

10-182 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Vendor No. 1460X4 1460X6 1460X8 1460X10 1460X12

Part No. 67800 67801 67802 67803 67804

Price /Each $0.14 0.18 0.24 0.51 1.05

Nut

Tube O.D. 1/4 3/8 1/2 5/8 3/4

Vendor No. 1461X4 1461X6 1461X8 1461X10 1461X12

Weatherhead Price /Each $0.52 0.45 0.86 1.49 2.27

Part No. 440750-131280 440751-131280 440752-131280 440753-131280 440754-131280

Utility Price Part No. /Each 67770 $0.39 67771 0.44 67772 0.75 67773 1.45 67774 2.17

Tube O.D. 1/4 1/4 3/8 3/8 3/8 1/2 1/2

Weatherhead Vendor Price FPT No. Part No. /Each 1/8 1/4 1/8 1/4 1466X6 440766-131280 2.65 3/8 1466X6X6 440767-131280 4.28 3/8 1466X8 440768-131280 4.35 1/2

Utility Price Part No. /Each 67353 $2.07 67352 5.93 67825 3.94 67826 3.28 67827 2.71 67828 6.96 67829 7.15

10_pHyd_147-192.qxd

3/11/07

3:01 PM

Page 183

BRASS AIR BRAKE FITTING FOR NYLON TUBING Brass Air Brake Fittings For Nylon Tubing Male Connector Weatherhead

Weatherhead Tube O.D. 1/4 1/4 1/4 1/4 3/8 3/8 3/8* 3/8 1/2* 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4

MPT 1/16 1/8 1/4 3/8 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4 3/8 1/2 3/4 1/2 3/4

Vendor No. 1468X4X1 1468X4 1468X4X4 1468X4X6 1468X6X2 1468X6 1468X6X6 1468X6X8 1468X8X4 1468X8 1468X8X8 1468X8X12 1468X10X6 1468X10 1468X10X12 1468X12 1468X12X12

Part No. 440770-131280 440771-131280 440772-131280 440773-131280 440774-131280 440775-131280 440776-131280 440777-131280 440778-131280 440779-131280 440780-131280 440781-131280 440782-131280 440783-131280 440784-131280 440785-131280 440786-131280

Utility Price /Each $3.31 1.45 1.69 1.98 1.79 1.73 1.94 2.85 3.25 2.72 3.28 9.36 5.29 4.55 14.78 7.45 10.35

Part No.

Price /Each

67830 67831 67832 67833 67834 67835 67836 67837 67838 67839

$1.40 1.66 1.95 1.77 1.66 1.85 2.78 3.21 2.61 3.16

67840 67841

5.25 3.90

67842 67843

7.44 10.31

Union Tee

Tube O.D. 1/4 3/8 1/2

Vendor No. 1474X4 1474X6

Part No. 440805-131280 440806-131280

Utility Price /Each $7.84 6.92

Part No.

Price /Each

67810 67811

$6.03 7.34

Male Run Tee

Tube x Tube x MPT 1/4 x1/4 x1/8 1/4 x1/4 x1/4 3/8 x1/4 x1/4 3/8 x3/8 x1/4 3/8 x3/8 x3/8 1/2 x1/2 x3/8 1/2 x1/2 x1/2 5/8 x5/8 x1/2

Weatherhead

Utility

Vendor No. 1471X4

Part No. 440809-131280

Price /Each $4.52

1471X6X4X4 1471X6

440810-131280 440811-131280

9.78 3.98

1471X6X6X6

440812-131280

4.62

Price /Each $4.48 6.35

Part No. 67861 67351 67862

3.87

67863 67864 67865 67866

4.57 7.20 8.34 20.58

90° Union Elbow

Tube O.D. x Tube O.D. 1/4 3/8 x3/8 x1/4 3/8 1/2 x1/2 x3/8 1/2 5/8

Weatherhead Vendor No. 1464X4 1464X6X6X4 1464x6 1464X8X8X6 1464X8

Part No. 440787-131280 440789-131280 440790-131280 440793-131280 440794-131280

Utility Price /Each $4.15 12.21 4.69 20.33 7.85

Part No. 67817

Price /Each $4.13

67818

4.65

67819 67820

7.04 25.20

*Reducing

Tube O.D. 1/4 3/8 1/2 5/8

Part No. 67821

Price /Each $5.95

67822 67823 67824

3.81 9.05 10.07

90° Male Elbow

Male Branch Tee

Weatherhead Tube x Tube x MPT 1/4 x1/4 x1/8 1/4 x1/4 x1/4 3/8 x1/4 x1/4 3/8 x3/8 x1/8 3/8 x3/8 x1/4 3/8 x3/8 x3/8 1/2 x3/8 x3/8 1/2 x1/2 x1/4 1/2 x1/2 x3/8 1/2 x1/2 x1/2 5/8 x5/8 x1/2

Weatherhead

Utility

Vendor No. 1472X4

Part No. 440796-131280

Price /Each $4.29

1472X6X4X4

440797-131280

9.79

1472X6 1472X6X6X6 1472X8X6X6 1472X8X8X4 1472X8

440799-131280 440800-131280 440801-131280 440802-131280 440803-131280

3.89 4.46 12.31 14.45 5.65

Part No. 67867 67868

Price /Each $4.25 4.28

67869 67870 67871

4.90 3.76 4.30

67872 67873 67874

5.60 7.59 24.12

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Tube O.D. 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 5/8 3/4

MPT 1/8 1/4 3/8 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 3/4 1/2

Vendor No. 1469X4 1469X4X4 1469X4X6 1469X6X2 1469X6 1469X6X6 1469X6X8 1469X8X4 1469X8 1469X8X8 1469X10X6 1469X10 1469X10X12 1469X12

Part No. 440818-131280 440819-131280 440820-131280 440821-131280 440822-131280 440823-131280 440824-131280 440825-131280 440826-131280 440827-131280 440828-131280 440829-131280 440830-131280 440832-131280

Utility Price /Each $1.79 1.88 6.99 2.22 2.25 2.57 3.23 3.52 3.35 4.33 8.99 9.41 26.75 11.56

Part No. 67844 67845

Price /Each $1.75 1.85

67846 67847 67848 67849 67850 67851 67852 67853 67854

2.17 2.11 2.53 3.07 3.31 3.33 4.23 8.92 9.35

67855

10.83

10-183 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hydraulic/Pneumatic Fleet

Bulkhead Union

10_pHyd_147-192.qxd

3/11/07

3:01 PM

Page 184

BRASS FITTINGS FOR NYLON & COPPER TUBING Hydraulic/Pneumatic Fleet

Brass Air Brake Fittings For Nylon Tubing Cont.

Gage Ring

Sleeve (To Convert To Nylon Tubing)

90° Female Elbow

Tube O.D. 3/8 3/8 3/8 1/2 1/2

FPT 1/8 1/4 3/8 3/8 1/2

Utility Price Part No. 67856 67857 67858 67859 67860

/Each $2.74 3.73 4.41 6.12 13.25

45° Male Elbow

Vendor No. 1485X4 1485X6 1485X8 1485X10 1485X12

Tube O.D. 1/4 3/8 1/2 5/8 3/4

Part No. 440855-131280 440856-131280 440857-131280 440858-131280 440859-131280

Price /Each $0.30 0.38 0.32 0.34 0.37

Brass Air Brake Fittings For Copper Tubing Brass air brake fittings for copper tubing are compression style, flareless fittings that meet SAE and DOT specifications.

Sleeve Weatherhead Vendor Price Tube O.D. MPT No. Part No. /Each 1/4 1/8 1480X4 440837-131280 $4.15 1/4 1/4 3/8 1/8 3/8 1/4 1480X6 440838-131280 3.21 3/8 3/8 1480X6X6 440839-131280 3.78 3/8 1/2 1/2 1/4 1480X8X4 440840-131280 7.71 1/2 3/8 1480X8 440841-131280 4.62 1/2 1/2 1480X8X8 440842-131280 6.48 5/8 1/2 1480X10 440843-131280 9.98

Utility Price Part No. /Each 67875 $4.10 67876 4.01 67877 6.57 67878 2.99 67879 3.73 67880 6.43 67881 6.56 67882 4.54 67883 6.25 67884 9.93

Tube O.D. 1/4 3/8 1/2 5/8 3/4

Vendor No. 1360X4 1360X6 1360X8 1360X10 1360X12

Weatherhead Price /Each $0.13 0.21 0.26 0.52 1.15

Part No. 440860-131280 440861-131280 440862-131280 440863-131280 440864-131280

Utility Price Part No. /Each 69401 $0.10 69402 0.19 69403 0.26 69404 0.49 69405 1.09

90° Male Elbow (Long)

Tube O.D. 3/8 1/2

MPT 1/4 3/8

Vendor No. 1469X6L 1469X8L

Part No. 440845-131280 440846-131280

Price /Each $6.54 8.43

Vendor No. 1361X4 1361X6 1361X8 1361X10 1361X12

Weatherhead Price /Each $0.52 0.71 1.22 1.57 3.07

Part No. 440865-131280 440866-131280 440867-131280 440868-131280 440870-131280

Utility Price Part No. /Each 69473 $0.48 69474 0.68 69475 1.15 69476 1.49

Vendor Tube O.D. No. 1/4 1461X4 3/8 1461X6 1/2 1461X8 5/8 1461X10 3/4 1461X12

Part No. 440848-131280 440850-131280

Price /Each $0.15 0.18 0.23 0.50 0.82

Weatherhead Price Part No. /Each 440750-131280 $0.52 440751-131280 0.45 440752-131280 0.86 440753-131280 1.49 440754-131280 2.27

Utility Price Part No. /Each 67770 $0.39 67771 0.44 67772 0.75 67773 1.45 67774 2.17

Weatherhead Price /Each $1.89 2.23 4.59 5.71 9.23

Utility Price Part No. /Each 69407 $1.81 69408 1.93 69409 3.76 69410 4.86 69411 7.99

Union

Vendor No. 1362X4 1362X6 1362X8 1362X10 1362X12

Part No. 440871-131280 440872-131280 440873-131280 440874-131280 440875-131280

90° Union Elbow

Insert (To Convert To Nylon Tubing)

Vendor No. 1477X6 1477X10X10X4

Part No. 440745-131280 440746-131280 440747-131280 440748-131280 440749-131280

Compressor Nut with V-groove Hex.

Female Branch Tee

Tube x Tube x FPT 3/8 x3/8 x1/4 5/8 x5/8 x1/4

Vendor No. 1460X4 1460X6 1460X8 1460X10 1460X12

Nut (To Convert To Nylon Tubing)

Tube O.D. 1/4 3/8 1/2 5/8 3/4

Nut

Tube O.D. 1/4 3/8 1/2 5/8 3/4

Weatherhead Tube O.D. 1/4 3/8 1/2 5/8 3/4

Price /Each $16.27 16.29

10-184 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Tube O.D. 1/4 3/8 1/2 5/8 3/4

Vendor No. 1484X4 1484X6 1484X8 1484X10 1484X12

Weatherhead Price /Each $0.19 0.21 0.33 0.75 0.91

Part No. 440755-131280 440756-131280 440757-131280 440758-131280 440759-131280

Utility Price Part No. /Each 67765 $0.18 67766 0.19 67767 0.31 67768 0.62 67769 0.84

Utility

Tube O.D. 1/4 3/8 1/2 5/8

Price Part No. 67779 67780 67781 67782

/Each $6.11 4.05 7.28 14.49

10_pHyd_147-192.qxd

3/11/07

3:02 PM

Page 185

BRASS AIR BRAKE FITTINGS FOR COPPER TUBING Brass Air Brake Fittings For Copper Tubing Cont. Male Connector Utility

Weatherhead Tube O.D. 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4

MPT 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 1/2 3/4

Vendor No. 1368X4 1368X4X4 1368X6X2 1368X6 1368X6X6 1368X6X8 1368X8X4 1368X8 1368X8X8 1368X10X6 1368X10 1368X12 1368X12X12

Utility Price /Each $0.95 1.15 1.62 1.62 1.95 4.55 2.36 2.20 2.64 4.27 3.19 11.93 14.47

Part No. 440880-131280 440881-131280 440882-131280 440883-131280 440884-131280 440885-131280 440886-131280 440887-131280 440888-131280 440889-131280 440890-131280 440891-131280 440892-131280

Part No. 69417 69418 69420 69421 69422 69423 69424 69425 69426 69427 69428 69452

Price /Each $0.84 1.00 1.53 1.53 1.88 4.49 2.05 1.91 2.28 3.52 2.76 14.30

Female Connector

Weatherhead Tube O.D. 1/4 1/4 3/8 3/8 3/8 1/2 1/2

FPT 1/8 1/4 1/8 1/4 3/8 3/8 1/2

Utility

Vendor No.

Part No.

Price /Each

1366X6 1366X6X6 1366X8

440894-131280 440895-131280 440896-131280

4.38 4.82 6.34

Part No. 67783 67784 67785 67786 67787 67788 67789

Price /Each $1.16 1.31 4.58 4.31 3.25 5.98 10.38

Price FPT 1/8 1/4 3/8 3/8 1/2 1/2

Tube O.D. 3/8 3/8 3/8 1/2 1/2 5/8

Part No. 67357 67791 67792 67356 67793 67794

/Each $2.01 3.21 3.53 3.28 4.07 10.54

45° Male Elbow

Weatherhead Tube O.D. 1/4 3/8 3/8 3/8 1/2 5/8 3/8 1/2

Vendor No.

MPT 1/8 1/8 1/4 3/8 3/8 1/2 1/2 1/2

1380X6 1380X6X6 1380X8 1380X10

Utility Price /Each

Part No.

440911-131280 440912-131280 440913-131280 440914-131280

4.74 4.41 4.33 12.76

Part No.

Price /Each

69455 69457 69458 69459 69461 69463 69460 69462

$2.80 5.94 3.56 4.20 4.25 7.09 5.04 5.00

Union Tee

Weatherhead Tube O.D. 1/4 3/8 1/2 5/8

90° Male Elbow

Utility

Vendor No.

Part No.

Price /Each

1364X6 1364X8

440915-131280 440917-131280

5.95 9.48

Price /Each $3.19 5.89 7.14 9.89

Part No. 67775 67776 67777 67778

Male Run Tee Weatherhead Tube O.D. 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4

MPT 1/8 1/4 1/8 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 1/2 3/4

Vendor No. 1369X4 1369X4X4 1369X6X2 1369X6 1369X6X6 1369X6X8 1369X8X4 1369X8 1369X8X8 1369X10X6 1369X10

Part No. 440897-131280 440898-131280 440899-131280 440900-131280 440901-131280 440902-131280 440903-131280 440904-131280 440905-131280 440906-131280 440907-131280

Utility Price /Each $1.48 1.61 2.24 2.45 2.86 6.65 7.76 4.41 4.13 8.80 7.24

Part No. 69430 69431 69433 69434 69435 69436 69437 69438 69439 69440 69441 69442 69443

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Price /Each $1.29 1.39 2.14 2.34 2.77 3.60 3.46 4.36 4.05 5.20 6.98 9.09 11.50

Weatherhead Tube O.D. 1/4 1/4 3/8 3/8 1/2 1/2

MPT 1/8 1/4 1/4 3/8 3/8 1/2

Utility

Vendor No.

Part No.

Price /Each

1371X6 1371X6X6X6

440918-131280 440919-131280

6.74 7.95

Part No. 69466 69467 69470 69471 69472 67355

Price /Each $3.09 4.28 3.97 4.95 5.88 5.88

10-185 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hydraulic/Pneumatic Fleet

90° Female Elbow

10_pHyd_147-192.qxd

3/11/07

3:02 PM

Page 186

BRASS FITTINGS FOR COPPER TUBING & HOSE Hydraulic/Pneumatic Fleet

Brass Air Brake Fittings For Copper Tubing Cont.

Truck Hydraulic Hose

Male Branch Tee

*ALL STARRED ITEMS ARE BULK QUANTITIES* H069 General Purpose Truck Hose SAE 100R5 - SAE J1402 Type II* - DOT AII* *Sizes 4 through 12 only

Weatherhead Tube O.D. 1/4 3/8 3/8 3/8 1/2 1/2

MPT 1/8 1/8 1/4 3/8 3/8 1/2

Utility

Vendor No.

Part No.

Price /Each

1372X6 1372X6X6X6 1372X8

440922-131280 440923-131280 440924-131280

4.28 7.51 10.79

Part No. 69444 69446 69447 69448 69449 69450

Price /Each $3.48 4.11 3.90 6.72 9.76 7.28

• Typical Application: General purpose truck and hydraulic hose. For use in air brake, fuel, grease lines, high temperature petroleum oils and medium pressure hydraulic applications. -16 through -48 sizes are not SAE or DOT approved for air brake applications. • Inner Tube: Nitrile • Reinforcement: 1 Fiber Braid; 1 Steel Braid • Cover: Fiber Braid • Temperature Range: Air brake: -40°F to +200°F (-40°C to +93°C) Hydraulic Fluid: -40°F to +212°F (-40°C to +100°C) • Hose Ends: Coll-O-Crimp 069 E-Series except for 40 and 48 Sizes; Field Attachable 069 D-Series; 247 N-Series

90° Male Elbow - Long Specifications

Tube O.D. 3/8 1/2

Vendor No. 1369X6L 1369X8L

MPT 1/4 3/8

Part No. 440926-131280 440927-131280

Price /Each $5.62 8.55

Bulkhead Coupling (F x L)

Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H06904 3/16 33/64 3000 H06905 1/4 37/64 3000 H06906 5/16 43/64 2250 H06908 13/32 49/64 2000 H06910 1/2 59/64 1750 H06912 5/8 1-5/64 1500 H06916 7/8 1-15/64 800 H06920 1-1/8 1-1/2 625 H06924 1-3/8 1-3/4 500 H06932 1-13/16 2-7/32 350 H06940 2-3/8 2-7/8 350 H06948 3 3-9/16 200

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 12000 3 16 12000 3-3/8 20 9000 4 23 8000 4-5/8 27 7000 5-1/2 36 6000 6-1/2 44 3200 7-3/8 46 2500 9 51 2000 10-1/2 62 1400 13-1/4 85 1400 24 143 800 33 209

Length 50', 250' 50', 250' 50', 250' 50', 250' 50', 250' 50', 250' 50', 250' 50', 150' 50', 100' 50', 100' 50' 50'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering.

FPT 1/4 1/4 3/8

Vendor No. 1344 1345 1346

Length 1.5 .94 -

Part No. 440113-131280 440112-131280 440114-131280

Price /Each $5.21 4.51 7.09

Bulkhead Coupling (M x F x L)

MPT 1/2 1/2 1/2 1/2

FPT 1/4 1/4 1/4 1/4

Length 2.16 2.53 2.94 3.94

Vendor No. 1340 1341 1342 1343

Part No. 440930-131280 440931-131280 440932-131280 440933-131280

10-186 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Each $7.54 7.94 11.66 13.31

Part No. 400223-131280 400224-131280 400225-131280 400226-131280 400227-131280 400228-131280 400229-131280 400230-131280 400231-131280 400232-131280 400233-131280 400234-131280 400235-131280 0446958 400236-131280 0446959 400237-131280 0446960 400238-131280

Vendor No. H06904-50 H06904-250 H06905-50 H06905-250 H06906-50 H06906-250 H06908-50 H06908-250 H06910-50 H06910-250 H06912-50 H06912-250 H06916-50 H06916-250 H06920-50 H06920-150 H06924-50 H06924-100 H06932-50

Hose I.D. 3/16 *3/16 1/4 *1/4 5/16 *5/16 13/32 *13/32 1/2 *1/2 5/8 *5/8 7/8 *7/8 1-1/8 *1-1/8 1-3/8 *1-3/8 1-13/16

Price /Ft $4.10 3.40 3.50 4.34 6.62 4.10 4.40 4.40 5.30 6.58 6.53 8.08 7.13 7.08 9.50 13.34 14.76 20.32 21.88

10_pHyd_147-192.qxd

3/11/07

3:02 PM

Page 187

TRUCK HYDRAULIC HOSE & MISCELLANEOUS FLEET HOSES Truck Hydraulic Hose Cont.

SAE J1402 Type All, DOT AIl

H166 Truck Hose SAE DOT AII, SAE J1402 Type AII • Typical Application: General-purpose truck and air brake hose. For use in air brake, fuel, diesel fuel and high temperatures petroleum oil applications • Inner Tube: Nitrile • Reinforcement: 1 Fiber Braid; 1 Stainless Steel Braid • Cover: Fiber Braid • Temperature Range: Air Brake: -40°F to +200°F (-40°C to +93°C) Hot Oil: -40°F to +302°F (-40°C to +150°C) Hydraulic Fluid: -40°F to +212°F (-40°C to +100°C) • Note: 16 and 20 Sizes are not SAE or DOT approved. • Hose Ends: Coll-O-Crimp® 069 E-Series; Field Attachable 069 DSeries; 247 N-Series Specifications Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H16604 3/16 33/64 1500 H16605 1/4 37/64 500 H16606 5/16 43/64 500 H16608 13/32 49/64 500 H16610 1/2 59/64 450 H16612 5/8 1-5/64 450 H16616 7/8 1-15/64 250 H16620 1-1/8 1-33/64 250 Part No. 400209-131280 400211-131280 400213-131280 400215-131280 400217-131280

Vendor No. H16604-50 H16605-50 H16606-50 H16608-50 H16610-50

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 6000 1-1/2 11 2000 1-3/4 13 2000 2 18 2000 2-5/16 21 1800 2-3/4 29 1800 3-1/4 37 1000 4 38 1000 5-1/2 46 Hose I.D. 3/16 1/4 5/16 13/32 1/2

Length 50', 250' 50', 250' 50', 250' 50', 250' 50', 250' 50', 250' 50', 250' 50' Price /Ft $4.75 5.05 5.80 6.13 7.10

H213 Truck Hose SAE J1402 Type AI, DOT AI • Typical Application: General-purpose truck hose. For use in air brake, fuel, diesel fuel and high temperature petroleum oil applications. • Inner Tube: CPE • Reinforcement: 1 Fiber Braid; 1 Steel Braid • Cover: Fiber Braid • Temperature Range: Air brake: -40°F to +200°F (-40°C to +93°C) Hot Oil and Fluids: -50°F to +302°F (-45°C to + 150°C) • Note: 16 Size is not SAE or DOT approved for air brake. • Hose Ends: Field Attachable 213 B-Series. Specifications Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H21304* 3/16 31/64 2000 H21305* 1/4 35/64 1500 H21306* 5/16 39/64 1500 H21308* 13/32 47/64 1250 H21310* 1/2 53/64 1000 H21312* 5/8 61/64 750 H21316* 7/8 1-13/64 400 Part No. 400194-131280 400195-131280 400196-131280 400197-131280 400198-131280 400199-131280 400200-131280 400201-131280 400202-131280 400203-131280 400204-131280 400205-131280 400206-131280

Vendor No. H21304-50 H21304-250 H21305-50 H21305-250 H21306-50 H21306-250 H21308-50 H21308-250 H21310-50 H21310-250 H21312-50 H21312-250 H21316-50

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 8000 3/4 12 6000 1 13 6000 1-1/4 16 5000 1-3/4 19 4000 2-1/4 21 3000 2-3/4 26 1600 3-1/2 32 Hose I.D. 3/16 *3/16 1/4 *1/4 5/16 *5/16 13/32 *13/32 1/2 *1/2 5/8 *5/8 7/8

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Length 50', 250' 50', 250' 50', 250' 50', 250' 50', 250' 50', 250' 50' Price /Ft $3.50 3.45 3.86 3.82 4.22 4.12 4.13 4.08 4.98 4.93 6.33 6.28 7.10

• Typical Application: General purpose truck hose. High temperature hydraulic, air brake and diesel fuel applications. • Inner Tube: Nitrile • Reinforcement: Two Fiber Braid • Cover: Fiber Braid • Temperature Range: Air Brake: -40° to +200°F (-40° to +93°C) Hydraulic Fluids: -40° to +300°F (-40° to +150°C) • Hose Ends: Coll-O-Crimp 069 E-Series; 229 P-Series (-4 to -10) except 12 Size; Field Attachable 247 N-Series; 069 D-Series Specifications Vendor No. H22904 H22906 H22908 H22910 H22912

Hose I.D. 3/16 5/16 13/32 1/2 5/8

Part No. 0400644 0400646 0400648 0400650 0400652

Hose O.D. 33/64 43/64 49/64 59/64 1-5/64

Work Pressure (PSI) 225 225 225 225 225

Vendor No. H22904-50 H22906-50 H22908-50 H22910-50 H22912-50

Min. Burst Pressure (PSI) 2000 2000 2000 1800 1800

Min. Bend Radii 1-1/2 2 2-5/16 2-3/4 3-1/4

Hose I.D. 3/16 5/16 13/32 1/2 5/8

Length 50', 250' 50', 250' 50', 250' 50', 250' 50', 250' Price /Ft $3.23 3.60 3.90 4.98 5.90

Miscellaneous Fleet Hoses

H338 Air Brake Hose SAE J1402 A Dot All • Typical Application: Air brake hose lines • Inner Tube: Synthetic EPDM • Reinforcement: Multi-Fiber Spiral • Cover: Synthetic EPDM • Temperature Range: -40°F to +200°F (-40°C to +93°C) • Hose Ends: Coll-OCrimp® 338 P-Series; Field Attachable 338 BSeries Specifications Vendor Work Pressure No. Hose I.D. Hose O.D. (PSI) H33806 3/8 3/4 225 H33808 1/2 7/8 225

Min. Burst Pressure Min. Bend Wt./100 (PSI) Radii (ft) 900 3-1/2 24 900 4 29

Length 50', 250' 50', 250'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 400059-131280 400060-131280 400061-131280 400062-131280

Vendor No. H33806-50 H33806-250 H33808-50 H33808-250

Hose I.D. 3/8 *3/8 1/2 *1/2

Price /Ft $1.34 1.25 1.87 1.65

10-187 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hydraulic/Pneumatic Fleet

H229 Truck Hose

10_pHyd_147-192.qxd

3/11/07

3:02 PM

Page 188

MISCELLANEOUS FLEET HOSES Hydraulic/Pneumatic Fleet

Miscellaneous Fleet Hoses Cont.

H324 Power Steering Hose

H057 Fuel Line Hose

SAE J188 Type II • Typical Application: Passenger Car/Light Truck power steering hose (Volumetric Expansion 8-17 cc/ft). • Inner Tube: Neoprene • Reinforcement: 2 Fiber Braids • Cover: Neoprene • Temperature Range: -40°F to +250°F (-40°C to +121°C) • Hose Ends: Coll-O-Crimp® U-Series

SAE 30R7 • Typical Application: Low-pressure/high-temperature fuel for passenger car and light truck; also small engine applications. • Inner Tube: Nitrile • Reinforcement: 1 Fiber Braid • Cover: Hypalon • Temperature Range: -40°F to +257°F (-40°C to +125°C) • Note: Not intended for fuel injection applications. • Hose Ends: Field Attachable 057 BSeries

Specifications Vendor No. H32406

Min.Burst Work Pressure Pressure Min.Bend Inch Merc. Wt./100 Hose I.D. Hose O.D. (PSI) (PSI) Radii Vacuum (ft) 3/16 13/32 50 250 2 24 6 1/4 1/2 50 250 2-1/2 24 9 5/16 9/16 50 250 2-3/4 24 11 3/8 5/8 50 250 3 24 12 7/16 11/16 35 140 3-1/4 24 16

Length 25', 100' 25', 100' 25', 100' 25', 50' 25', 50'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Vendor No. H05703-25 H05703-100 H05704-25 H05704-100 H05705-25 H05705-100 H05706-25 H05706-50 H05707-25 H05707-50

Part No. 400049-131280 400050-131280 400051-131280 400052-131280 400053-131280 400054-131280 400055-131280 400056-131280 400057-131280 400058-131280

Price /Ft $2.03 1.72 2.18 1.78 2.42 1.93 1.83 1.60 2.82 2.59

Hose I.D. 3/16 *3/16 1/4 *1/4 5/16 *5/16 3/8 *3/8 7/16 *7/16

H077 Fuel Injection Hose SAE 30R9 • Typical Application: Designed specifically for electronic fuel injection systems. • Inner Tube: Fluoroelastomer Veneer • Reinforcement: Multi-Fiber Braid • Cover: ECO (Epichlorohydrin Copolymer) • Temperature Range: -30°F to +275°F (-34°C to +135°C) • Hose Ends: Hose Clamps Specifications Vendor No. H07704-10 H07705-10 H07706-10

Hose I.D. 1/4 5/16 3/8

Hose O.D. 1/2 9/16 5/8

Work Pressure (PSI) 125 125 125

Min. Burst Pressure (PSI) 900 900 900

Min. Bend Radii 3 3-3/4 4-1/2

Wt./100 (ft) 11 13 16

Length 10' 10' 10'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 0400610 0400611 0400612

Hose O.D. 3/4

Work Pressure (PSI) 1500

Min. Burst Pressure (PSI) 6000

Min. Bend Radii 3-1/8

Wt./100 (ft) 24

Length 50'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering.

Specifications Vendor No. H05703 H05704 H05705 H05706 H05707

Hose I.D. 3/8

Vendor No. H07704-10 H07705-10 H07706-10

Hose I.D. *1/4 *5/16 *3/8

10-188 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Price /Ft $7.17 7.79 8.61

Part No. 400208-131280

Vendor No. H32406-50

Price /Ft $6.80

Hose I.D. *3/8

H757 Air Conditioning Hose SAE J2064 Type C Class 1 • Typical Application: A refrigerant hose recommended for R134a and R12 applications. Ideal for heavy duty truck use as well as industrial and automotive applications. • Inner Tube: Rubber/Nylon/Rubber • Reinforcement: 1 Fiber Spiral • Cover: Butyl (perforated) • Temperature Range: -22°F to +257°F (-30°C to +125°C) • Hose Ends: Coll-O-Crimp® 757 E-Series

Specifications Vendor No. H75706 H75708 H75710 H75712

Hose I.D. 5/16 13/32 1/2 5/8

Hose O.D. 9/16 11/16 3/4 15/16

Work Pressure (PSI) 400 400 350 350

Min. Burst Pressure (PSI) 2000 2000 1750 1750

Min. Bend Radii 2 2-1/2 3 4

Wt./100 (ft) 10 12 13 23

Length 50',100', 250' 50',100', 250' 50',100', 250' 50',100', 250'

Fastenal Branch Personnel: Please Sold Request number of feet when ordering. Part No. 0401066 0401067 0401069 0401070

Vendor No. H75706-50 H75706-100 H75708-50 H75708-100

Hose I.D. 5/16 5/16 13/32 13/32

Price /Ft $4.38 4.18 4.80 4.58

0401072 0401073

H75710-50 H75710-100

1/2 1/2

5.23 5.00

0401075 0401076

H75712-50 H75712-100

5/8 5/8

6.10 5.83

10_pHyd_147-192.qxd

3/11/07

3:02 PM

Page 189

FIELD ATTACHABLE AIR BRAKE

Typical Application: Air brake hose lines Compatible Hose: H338 Pressure: Determined by hose burst pressure Material: CA360 Brass Advantages: Saves time and easy to assemble. Excellent corrosion resistance. Assemble With: T-400-1, T-410-1, T-420-1, T-440, T-465-1, T-460, T-462-1, T-480 and ET4000. Label Set: FS-2900 Note: Refer to current price list for availability of cataloged items. Configurations and dimensions subject to change without notice. Assembly Instructions: 1. Push collar onto hose until bottomed. 2. Push insert into hose until step on insert (or hex) is flush with collar. Note: Swivel fittings require the use of a mandrel or an assembled adapter to push on the insert for assembly. Adapter can be removed after fitting assembly. Light lubricant may be required to assemble fitting into hose. 3. Check for bottoming by checking collar movement along insert. Hose is bottomed when collar cannot slide along insert.

Female Connector

Air Brake Swivel

Hose x Pipe 3/8 x3/8 1/2 x3/8 1/2 x1/2

Part No. 410711-131280 410712-131280 410713-131280

Vendor No. 33806P-Y76 33808P-Y76 33808P-Y78

Price /Each $5.99 8.09 12.05

Part No. 410741-131280 410742-131280

Vendor No. 33806B-Y76 33808B-Y78

Price /Each $9.33 13.81

Vendor No. 33806B-Y84 33806B-Y86 33808B-Y86

Price /Each $11.24 11.88 13.34

Steel Nut

Female Connector

Adaptor

Hose x Pipe 3/8 x 1/4 3/8 x3/8 3/8 x1/2

Hose x ABS Thread 3/8 x 3/4-20 1/2 x 7/8-20

With Adaptor

Part No. 410726-131280 410727-131280 410728-131280

Vendor No. 1390X6 1390X6X6 1390X6X8

Price /Each $2.38 2.71 6.25

338 B-Series Air Brake Hose Ends

Hose x ABS Thread 3/8 x3/4-20 3/8 x3/8-20 1/2 x7/8-20

Part No. 410743-131280 410744-131280 410745-131280

Steel Nut

Hose Mender Typical Application: Air brake hose lines Compatible Hose: H338 Pressure: Determined by hose burst pressure. Material: CA360 Brass Advantages: Can be used for nearly any air brake line. Easy to assemble with a good selection of hose end configurations. Excellent corrosion resistance. Label Set: FS-800

Male Pipe Rigid

Hose 3/8 1/2

Part No. 410746-131280 410747-131280

Vendor No. 33806B-Y06 33808B-Y08

Price /Each $21.45 30.12

Vendor No. 33806-E

Price /Each $14.19

Vendor No. 33806-C 33808-C

Price /Each $1.60 2.31

Hose Mender Body Only

Hose x Pipe 3/8 x1/4 3/8 x3/8 3/8 x1/2 1/2 x3/8 1/2 x1/2

Part No. 410700-131280 410701-131280 410702-131280 410703-131280 410704-131280

Vendor No. 33806P-104 33806P-106 33806P-108 33808P-106 33808P-108

Price /Each $3.07 3.44 4.38 3.67 4.56

Hose 3/8

Spring Guard Male Connector

Male Pipe Swivel

Hose x Pipe 3/8 x3/8

Part No. 410706-131280

Vendor No. 33806P-J06

Price /Each $8.67

SAE 45° Female Swivel

Hose x Pipe 3/8 x1/4 3/8 x3/8 3/8 x1/2 1/2 x 3/8 1/2 x 1/2

Vendor No. 33806B-Y24 33806B-Y26 33806B-Y28 33808B-Y26 33808B-Y28

Weatherhead Utility Price Part Price Part No. /Each No. /Each 410731-131280 $6.81 68994 $4.79 410732-131280 6.27 68995 5.83 410733-131280 8.38 68996 5.32 410734-131280 11.93 410735-131280 12.37

Male Connector With Spring Guard Hose x Pipe 3/8 x3/8 1/2 x1/2

Part No. 410707-131280 410708-131280

Vendor No. 33806P-406 33808P-408

Price /Each $4.27 6.34

Air Brake Slider Line

Hose x Pipe 3/8 x3/8 3/8 x1/2

Part No. 410709-131280 410710-131280

Vendor No. 33806P-Y66 33806P-Y68

Price /Each $13.02 13.96

Part No. 410748-131280

Hose x Pipe 3/8 x1/4 3/8 x3/8 3/8 x1/2 1/2 x 3/8 1/2 x 1/2

Vendor No. 33806B-Y34 33806B-Y36 33806B-Y38 33808B-Y36 33808B-Y38

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Weatherhead Utility Price Part Price Part No. /Each No. /Each 410736-131280 $6.99 68997 $5.53 410737-131280 11.23 68998 5.59 410738-131280 10.23 68999 6.23 410739-131280 11.53 410740-131280 11.02

Hose 3/8 1/2

Part No. 410754-131280 410755-131280

Insert Body Only Hose x Pipe 3/8 x 1/4 3/8 x 3/8 3/8 x 1/2 1/2 x 3/8 1/2 x 1/2

Part No. 410756-131280 410757-131280 410758-131280 410759-131280 410760-131280

Vendor No. 1391X6 1391X6X6 1391X6X8 1391X8 1391X8X8

Price /Each $5.05 5.64 4.65 6.19 7.13

Sleeve

Vendor Hose No. 3/8 33806-A 1/2 33808-A

Weatherhead Utility Price Price Part No. /Each Part No. /Each 410761-131280 $1.50 68991 $1.02 410762-131280 2.52

10-189 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hydraulic/Pneumatic Fleet

338 P-Series Air Brake Hose Ends

10_pHyd_147-192.qxd

3/11/07

3:02 PM

Page 190

FIELD ATTACHABLE GENERAL PURPOSE HOSE ENDS 338 B-Series Hose Ends Cont. Hydraulic/Pneumatic Fleet

SAE 37° (JIC) Female Swivel

SAE 37° (JIC) Female Swivel

Hose x Tube 3/16 x 1/4 1/4 x 5/16 5/16 x3/8 5/16 x 3/8 13/32 x1/2 1/2 x 5/8 5/8 x 3/4 1-1/8 x 1-1/4 1-13/16 x 2

Hose x Tube 3/16 x1/4 1/4 x5/16 5/16 x3/8 5/16 x3/8 13/32 x1/2 1/2 x5/8 5/8 x3/4 5/8 x3/4 7/8 x 1

Nut

Vendor Hose No. 3/8 33806-B 1/2 33808-B

WH Utility Price Price Part No. /Each Part No. /Each 410763-131280 $3.23 68992 $1.34 410764-131280 3.41

Nut for Spring Guard

Part No. 412405-131280* 412406-131280* 412407-131280 412408-131280 412409-131280 412410-131280* 412412-131280 412414-131280 412416-131280

Vendor SAE OR Price No. JIC /Each 06904D-604 Both $11.70 06905D-605 Both 19.41 06906D-406 SAE 6.29 06906D-606 Both 5.23 06908D-608 Both 7.15 06910D-610 Both 11.90 06912D-612 Both 14.04 06920D-620 JIC 28.85 06932D-632 JIC 93.98

Part No. 33806-D 33808-D

Vendor No. 410765-131280 410766-131280

Price /Each $4.39 4.67

069 D-Series Field Attachable Hose Ends Typical Application: Medium pressure and high temperature hose lines for a variety of applications including truck, industrial and small engine where temperature may be a problem. Compatible Hose: H069, H166, H169, H229, H366 Pressure: Determined by hose burst pressure. Material: AISI/SAE 12L14 Carbon Steel PlatIng: Zinc, yellow dichromate finish Advantages: Very popular in heavy-duty truck markets. Can be used with a variety of hoses allowing for a diverse number of applications. Assembly Instructions: 1. Lubricate mandrel insert threads and I.D. of hose. 2. Screw hose into socket (left-hand thread) until hose bottoms. Back out 1/4 turn. 3. Place insert on mandrel. Screw insert into socket. When assembling swivel ends, leave 1/32” clearance between swivel nut and socket. Label Set: FS-600

Vendor SAE OR Price No. JIC /Each 21304N-604 Both $3.41 21305N-605 Both 4.06 21306N-406 SAE 4.61 21306N-606 JIC 4.11 21308N-608 Both 5.76 21310N-610 Both 10.29 21312N-412 SAE 23.97 21312N-612 JIC 21.95 21316N-616 JIC 15.92

Inverted Male Swivel 45° Tube Elbow

*Brass Construction

Hose 3/8 1/2

Part No. 412438-131280 412439-131280 412440-131280 412441-131280 412442-131280 412443-131280 412444-131280 412445-131280 412446-131280

213 N-Series Field Attachable Hose Ends Typical Application: Medium pressure and high temperature hose lines for a variety of applications including truck, industrial and small engine where high temperatures exist. Compatible Hose: H213 Pressure: Determined by maximum hose burst pressure for hose size and hose end configuration, whichever is lesser. Material: AISI/SAE 12L14 Carbon Steel Plating: Zinc, yellow dichromate finish Advantages: Very popular in heavy-duty truck markets. Good selection of hose ends, including brass. Non-mandrel assembly. Assembly Instructions: 1. Lubricate insert threads and I.D. of hose. 2. Screw hose into socket (left-hand thread) until hose bottoms. Back out 1/4 turn. 3. Screw insert into socket until insert touches socket.

Hose x Tube 3/16 x1/4 1/4 x5/16

Part No. 412453-131280 412454-131280

Vendor No. 21304N-E44 21305N-E45

Price /Each $7.20 7.84

5/16 x1/4 5/16 x3/8

412455-131280 412457-131280

21306N-E44 21306N-E46

9.34 7.80

SAE 37° (JIC) Female Swivel 45° Tube Elbow

Hose x Tube 3/16 x1/4 5/16 x3/8 5/16 x3/8 13/32 x1/2

Part No. 412459-131280 412461-131280 412462-131280 412463-131280

Vendor SAE OR Price No. JIC /Each 21304N-684 Both $9.18 21306N-486 SAE 8.79 21306N-686 JIC 10.75 21308N-688 Both 10.42

Inverted Male Swivel 90° Tube Elbow

Male Pipe Rigid

Male Pipe Rigid

Hose x Pipe 3/16 x 1/8 3/16 x 1/4 1/4 x 1/4 5/16 x 1/4 13/32 x3/8 13/32 x1/2 1/2 x 1/2 5/8 x 3/4 7/8 x 3/4 7/8 x 1 1-13/16 x 2

Part No. 412387-131280 412388-131280 412389-131280 412390-131280 412391-131280 412392-131280 412393-131280 412394-131280 412395-131280 412396-131280 412399-131280

Vendor No. 06904D-102 06904D-104 06905D-104 06906D-104 06908D-106 06908D-108 06910D-108 06912D-112 06916D-112 06916D-116 06932D-132

Price /Each $11.10 4.15 4.50 4.28 17.27 20.90 9.48 42.89 25.26 16.28 84.50

*Brass Connection

10-190 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hose x Pipe 3/16 x1/8 3/16 x1/4 1/4 x1/4 5/16 x3/8 13/32 x1/2 1/2 x1/2 5/8 x3/4 7/8 x 1

Part No. 412424-131280 412425-131280 412426-131280 412427-131280 412428-131280 412429-131280 412430-131280 412431-131280

Vendor No. 21304N-102 21304N-104 21305N-104 21306N-106 21308N-108 21310N-108 21312N-112 21316N-116

Price /Each $2.36 5.59 3.22 4.81 19.74 6.42 8.72 29.47

Hose x Tube 3/16 x1/4

Part No. 412464-131280

Vendor No. 21304N-E04

Price /Each $6.73

1/4 x5/16 5/16 x1/4 5/16 x5/16 5/16 x3/8 13/32 x1/2

412465-131280 412466-131280 412467-131280 412468-131280 412469-131280

21305N-E05 21306N-E04 21306N-E05 21306N-E06 21308N-E08

7.20 9.77 6.68 8.04 12.93

SAE 37° (JIC) Female Swivel 90° Tube Elbow

Inverted Male Swivel Straight

Hose x Tube 5/16 x1/4 5/16 x5/16 5/16 x3/8 13/32 x1/2

Part No. 412434-131280 412435-131280 412436-131280 412437-131280

Vendor No. 21306N-B04 21306N-B05 21306N-B06 21308N-B08

Price /Each $15.78 5.98 5.44 9.78

Hose x Tube 3/16 x1/4 5/16 x3/8 5/16 x3/8 13/32 x1/2

Part No. 412470-131280 412472-131280 412473-131280 412474-131280

Vendor SAE OR Price No. JIC /Each 21304N-664 Both $8.72 21306N-466 SAE 10.23 21306N-666 JIC 8.79 21308N-668 Both 11.36

10_pHyd_147-192.qxd

3/11/07

3:03 PM

Page 191

247 N-Series Field Attachable Hose Ends

SAE 37° (JIC) Female Swivel

Typical Application: Medium pressure and high temperature hose lines for a variety of applications including truck, industrial and small engine where temperature may be a problem. Compatible Hose: H059, H069, H166, H169, H229, H366, H569 Pressure: Determined by maximum working pressure for hose size and hose end configuration, whichever is lesser. Material: AISI/SAE 12L14 Carbon Steel Plating: Zinc, yellow dichromate finish Advantages: Very popular in heavy-duty truck markets. Good selection of hose ends. Compatible with a wide variety of hose types allowing for a diverse number of applications. Non-mandrel assembly. Assembly Instructions: 1. Lubricate insert threads and I.D. of hose. 2. Screw hose into socket (left-hand thread) until hose bottoms. Back out 1/4 turn. 3. Screw insert into socket until insert touches socket. Label Set: FS-600

Hose x Tube 3/16 x1/4 1/4 x5/16 5/16 x1/4 5/16 x5/16 5/16 x3/8 5/16 x1/2 13/32 x1/2 1/2 x1/2 1/2 x5/8 5/8 x3/4 7/8 x 1

Part No. 411201-131280 411202-131280 411376-131280 411203-131280 411204-131280 411205-131280 411206-131280 411207-131280 411377-131280 411208-131280

Vendor No. 24704N-604 24705N-605 24706N-604 24706N-605 24706N-606 24706N-608 24708N-608 24710N-608 24710N-610 24712N-612 24716N-616

SAE OR Price JIC /Each Both $4.93 Both 6.81 Both 6.23 Both 7.18 JIC 37 6.03 Both 15.11 Both 8.28 Both 21.81 Both 11.38 JIC 37 17.03 JIC 37 20.97

Vendor No. 24704N-102 24704N-104 24705N-104 24706N-104 24706N-106 24708N-106 24708N-108 24710N-108 24710N-112 24712N-112

Price /Each $3.53 3.76 4.96 4.85 6.15 9.50 7.38 8.53 16.33 14.45

Hose x Tube 3/16 x1/4 1/4 x5/16 5/16 x3/8 5/16 x3/8 13/32 x1/2 1/2 x5/8 5/8 x3/4 7/8 x 1

Part No. 411432-131280 411433-131280 411434-131280 411435-131280 411436-131280 411437-131280 411439-131280 411440-131280

Vendor No. 24704N-664 24705N-665 24706N-466 24706N-666 24708N-668 24710N-670 24712N-672 24716N-676

SAE OR Price JIC /Each Both $11.23 Both 15.58 SAE 45 13.83 JIC 37 14.63 Both 20.13 Both 18.65 JIC 37 27.97 JIC 37 28.60

SAE 45° Flare Female Swivel

Fleet Filtration Hose x Tube 5/16 x3/8 13/32 x3/8

Part No. 411409-131280 411410-131280

Vendor No. 24706N-406 24708N-406

Price /Each $6.15 15.52

Inverted Male Swivel 45° Tube Elbow

Male Pipe Rigid

Hose x Pipe 3/16 x1/8 3/16 x1/4 1/4 x1/4 5/16 x1/4 5/16 x3/8 13/32 x3/8 13/32 x1/2 1/2 x1/2 1/2 x3/4 5/8 x3/4

Part No. 411209-131280 411405-131280 411406-131280 411407-131280 411212-131280 411214-131280 411210-131280 411215-131280 411216-131280 411211-131280 411408-131280

SAE 37° (JIC) Female Swivel 90° Tube Elbow

Hose x Tube 1/4 x5/16

Part No. 411417-131280

Vendor No. 24705N-E45

Donaldson Air Filters • Expect consistent quality and performance • Hold over 40 TS and ISO quality and environmental certifications • Donaldson designs and supplies most original equipment air systems, so our replacement filters are designed to meet or exceed OE standards • Demand Donaldson!

Price /Each $11.58

SAE 37° (JIC) Female Swivel 45° Tube Elbow Pn. 0456172

Pn. 0456481

SAE 37° (JIC) Male Rigid

Hose x Tube 3/16 x1/4 1/4 x5/16 5/16 x3/8 13/32 x1/2 1/2 x5/8 5/8 x3/4

Part No. 411378-131280 411379-131280 411380-131280 411381-131280 411382-131280 411383-131280

Vendor No. 24704N-504 24705N-505 24706N-506 24708N-508 24710N-510 24712N-512

Price /Each $6.38 18.28 7.80 15.22 16.15 23.36

Hose x Tube 3/16 x1/4 1/4 x5/16 5/16 x3/8 13/32 x1/2 1/2 x5/8 5/8 x3/4 7/8 x 1

Part No. 411418-131280 411419-131280 411422-131280 411423-131280 411424-131280 411426-131280 411427-131280

Vendor No. 24704N-684 24705N-685 24706N-686 24708N-688 24710N-690 24712N-692 24716N-696

SAE OR Price JIC /Each Both $11.11 Both 14.92 JIC 37 13.54 Both 14.22 Both 22.95 JIC 37 28.72 JIC 37 28.58

Inverted Male Swivel 90° Tube Elbow

Flareless Tube Rigid With Nut and Sleeve

Hose x Tube 5/16 x1/4 5/16 x5/16 5/16 x3/8

Part No. 411401-131280 411402-131280 411403-131280

Vendor No. 24706N-754 24706N-755 24706N-756

Price /Each $21.71 15.23 15.30

Hose x Tube 3/16 x1/4 1/4 x5/16 5/16 x1/4 5/16 x5/16 5/16 x3/8

The : symbol after a price denotes that it is a Direct Ship Product (DSP) and shipping, availability & lead times may vary.

Part No. 411428-131280 411429-131280 411430-131280 411431-131280 411221-131280

Vendor No. 24704N-E04 24705N-E05 24706N-E04 24706N-E05 24706N-E06

Pn. 0456689

Air Cleaner/Filter Vendor Part No. No. 0456481 P537454

Description Racor Eco SE W/Side Inlet 0456172 P537450 Racor Eco CM 13.5 x 24 0456689 P154927 Racor EcoII #71338-002, United F-EcoII 11 x 24

Price Length /EA 19.4 $122.43| 24

192.98

25.75

99.06

Price /Each $8.55 11.13 12.85 13.40 14.78

10-191 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Hydraulic/Pneumatic Fleet

FIELD ATTACHABLE HOSE ENDS & FLEET FILTRATION

10_pHyd_147-192.qxd

3/11/07

3:03 PM

Page 192

FLEET FILTRATION Fleet Filtration Cont.

Fuel Filters

Secondary Air Filter

Hydraulic/Pneumatic Fleet

Vendor Part No. No. 0454642 P607354

Description John Deere AL78224

Price Length /EA 5.2 $52.59

Primary Air Filter Vendor Part No. No. 0454641 P607353 0454701 P771559 0454756 P778361 0456197 P181014 0455776 P181016 0456392 P181028 0455446 0455437 0456199 0455971

P544765 P181082 P181046 P181015

0455978 P181096 0455246 P182002 0455553 0455556 0455242 0455252

P181009 P181049 P181186 P182049

0455639 P181095 0454984 P181099 0455924 P181189 Konepac 0456173 P129472 0455753 P129396 0455682 0455760 0455762 0455786 0455552 0455217

P141317 P150694 P151097 P522293 P150695 P155842

0455561 P521598 0455551 P142100 0455550 P141228 PowerCore 0455993 P607960 0455992 P607955 0455646 P607965 Radial Seal 0456030 P534096 0456212 P537355 0454895 P533930 0455265 P542753 0455988 P532505 0455266 P544243 0456685 P534925 0455258 P533235 0455564 P540388 0455260 P533938

Price Description Length /EA John Deere AL78223 12.27 $93.77 Freightliner FLN, 18.5 35.68 EPG11 or FRG11 AC Gardner Denver 8507413 13 19.43 EBA13 A/C, 15 56.49 Ford D5HZ9601D EBA13 A/C, 26 70.38 White, Freightliner EBB12 or EGB12 16 47.36 A/C IHC 476741C1 ECG11 Air Cleaner 20.04 73.25 FTG13 Cyclopac A/C 20 83.30 FHG14 Cyclopac A/C 16 39.26 EBB14 or EGB14 18 61.79 A/C IHC 476743C1 EBB15 A/C, Volvo/ 15 62.06 White 22005-3202 Long Life Version 18 65.35 of P181002 EBA15 A/C FVG16 Cycloflow A/C Vortox VF160R Long Life Version of P181049 EBB16 A/C, Volvo/ White 22005-3201 EBB16, IHC, GMC Ford E2HZ9601B EBA09- Treated W/CVR Gasket EBA11- Treated W/CVR Gasket IHC 574844C1 ECG11 - Stand. EBA11 - Stand. EBA11 ECG11 Short ECG11 A/C, GMC 15527863 EBA13, Kenworth, Peterbilt EBA13 - Treated EBA13 Air Cleaner Freightliner M2 Series Flame Retardant Freightliner M2 Series High HP Freightliner M2 Series High HP Perterbilt Truck, Model 385 ERA11 Air Clnr, Freightliner Classic EPG13 Air Cleaners Peterbilt, ERA13 Caterpillar 6I-2505, 1P-8482 Peterbilt, ERA15 Kenworth & Peterbilt Conventionals Navistar 2005895C1 Volvo 8076195 Ford F6HZ9601CA, Motorcraft FA1637

Vendor Part No. No. Water Separator 0456234 P558000 0456061 P551001

Safety Air Filter

Vendor Part No. No. Radial Seal 0454823 P782300 0456684 P533814 0456525

Description Dynapac 380294 Ford F6HZ9601BA, Motorcraft FA1636 Volvo 11110176

P778906

Length

Price /EA

8.89 $11.85 16.85 84.80 3.7

26.36

Spin-on Air Dryer

26 51.28 24.03 117.26 26 75.30 24.03 144.89 Vendor Part No. No. 0454805 P781466

Price Description Length /EA Mercedes-Benz:Actros I, 6.5 $48.56 Actros II, Atego, Vario

15.5

68.19

18.06 10

63.30 80.66

28

66.70

28

78.81

22 28 28 28 28.02 20.02

70.66 61.79 77.26 75.51 86.92 76.06

24

79.79

Vendor Price Part No. No. Description Length /EA 0454565 P607277 Chrysler 53032404AA 2.05 $42.24

24 28

100.96 115.18

Donaldson Engine Liquid Filters

7.99

93.28

7.99

65.81

7.99

98.81

23.03

66.64

• Lube, fuel, and coolant diesel engines filters • Expect consistent quality and performance • Hold over 40 TS and ISO quality and environmental certifications • Designed for durability • Demand Donaldson!

24.61

66.65

Lube Filters

15.15

52.64

21.19 15.02

78.81 68.70

21.38 25.44

83.15 67.15

18.15 15.94 17.24

42.98 44.22 92.23

Description

Cummins Cummins Celect & Quantum Engines 0456067 P558010 Detroit Diesel 23512317 0455455 P552020 Racor 2020SM 0457001 P550730 Ford F1HZ9365A, Carrier 30-01079 Primary, Spin-On 0454908 P551315 Caterpillar 1R-0759 0456450 P550105 Cummins 154709 0456479 P557440 Cat 1R-0711, 1P-2299, 6l-7440, KTSU 600-311-8290 0456925 P550372 Volvo 420799 0456142 P554470 Mack 483-GB-470M 0456128 P550219 Mack 483-GB-219A 0455950 P555823 Cat 4N-5823 Primary, Cartridge 0456822 P550632 Mercedes 0000901551 0456825 P550762 Mercedes 5410900151 0455622 P550463 Davco 380/382 Series Detroit Diesel Engines Secondary, Spin-On 0456319 P551313 Caterpillar 1R-0750 0456064 P552200 Cummins 4088272, Fleetguard FF2200 0455949 P554471 Mack 483GB471M 0455946 P550431 Mack 483-GB-431 0455832 P552603 IHC 672603C1

Length

Price /EA

7.4 7.98

$9.48 17.64

7.36 9.63 5.1

15.19 8.57 23.60

6.93 5.35 6.85

11.60 4.37 5.11

8.13 7.95 7.89 10.6

9.10 12.64 9.25 12.34

3.98 7.97 6.74

17.96 14.09 7.28

6.95 9.18

11.52 15.50

10.3 10.31 7.98

15.56 12.61 10.87

Ventilation Panel Air Filter Coolant Filters

10-192 HYDRAULICS, PNEUMATICS & POWER TRANSMISSION

Vendor Part No. No. Cartridge 0455621 P550425 Full Flow 0457741 P550521 0457744 P550564 0457746 P550761 0457749 P550768 0456383 P550286 0456374 P550769 Full Flow, Spin-On 0455892 P169556 0455102 P550367

Description Volvo 4775565

Length

Price /EA

10.36 $16.00

Mercedes 1041800109 Mercedes 6111800009 Mercedes 0001801709 Mercedes 0001801609 Mack 57GC2134 Mercedes 0001802109

6.2 4.53 8.24 5.8 4.58 9.76

7.47 14.38 15.49 14.91 12.32 16.21

Cummins Navistar 1819452C1

8.94 12.1

78.08 23.62

Part No. Spin-On 0456272 0456464 0454949

Vendor No.

Description

Length

Price /EA

P554860 P554019 P552071

Mack 25-MF-314A Volvo 3645411 Cummins 3315116

5.35 5.35 4.15

$9.60 14.60 7.59

Coolant Additive Part No. 0456506

Vendor No. X006136

Description 1Pint/16oz SCA Formula

Price /Each $3.92