branches related

8/29/2014 PROGRESS REPORT CENTER OF EXCELLENCE SMART RENEWABLE ENERGY SYSTEMS [SRES] COLLEGE OF ENGINEERING PUNE 20th JUNE 2014 PI-Prof. B. N. Chaudh...
Author: Adela Morgan
2 downloads 1 Views 1MB Size
8/29/2014

PROGRESS REPORT CENTER OF EXCELLENCE SMART RENEWABLE ENERGY SYSTEMS [SRES] COLLEGE OF ENGINEERING PUNE 20th JUNE 2014 PI-Prof. B. N. Chaudhari and Prof. S. S. Dambhare College of Engineering Pune (COEP) Forerunners in Technical Education

Areas/branches related to Ce Centre teo of Excellence ce e ce • • • • •

Electrical Engineering Mechanical Engineering Instrumentation and Control Computer Electronics and Telecommunication

College of Engineering Pune (COEP) Forerunners in Technical Education

1

8/29/2014

Brief description about objectives of CoE Specific objectives of the Center To work in the following areas of energy studies .... [a] Power generation and utilization using wind and solar energy • Development of 10 kw micro grid using 2-3 kw wind mills and 2-3 kw p solar plant • Development of permanent magnet generators for small wind 2-5 kw wind turbines • Development of efficient power converters

College of Engineering Pune (COEP) Forerunners in Technical Education

[b] Real time system simulation of energy systems ƒ Real time simulation of power converters ƒ Real time simulation of electrical machines ƒ Real time simulation of interconnected systems ƒ Real time simulation of microgrid [c] Solar Thermal System ƒ Community solar water heating systems[SWHS] ƒ Constant temperature delivery from SWHS ƒ Solar Food Dryers ƒ Parabolic trough concentrator systems ƒ Optimization of low and medium temperature solar thermal systems ƒ Mobile erngy audit unit College of Engineering Pune (COEP) Forerunners in Technical Education

2

8/29/2014

[d] Demand side management through energy Conservation ƒ ƒ ƒ ƒ

Energy related consultancy to consumers Consultancy in preparing and implementing energy efficiency measures Creating energy awareness and demonstrations through case studies Pilot demonstration model development for educational institutes

[e] Demand side management through development of energy efficient systems ƒ ƒ ƒ

Research and consultancy in the area of energy efficient equipment. Design and Development of permanent magnet motors for fixed and variable speed applications Development of switched reluctance drive / PM motor drive for solar pump

[f] Development of power conditioners, digital controllers for RES ƒ Development D l off hi highh performance f controllers ll ƒ Application of modern control algorithms for renewable energy systems ƒ Development of DAS for the low power renewable energy

College of Engineering Pune (COEP) Forerunners in Technical Education

Action p plan of CoE

College of Engineering Pune (COEP) Forerunners in Technical Education

3

8/29/2014

ACTIVITY 1

April‐ Oct13‐ Sept 13 Mar14

April – Sept14

Oct14‐ Mar15

April15‐ Sept15

Oct 15‐ Mar16

Identification of intra‐department location, cross‐functional work groups. Survey of literature, Identification of research projects and enlisting probable equipment/software tools/signal acquisition systems Persistent collaboration with concerned industry, research organizations and labs, higher learning centers Identification of the projects for M.Tech Development of Infrastructure:

2

3

4 5

Refurbishment of identified Center location Detailing specifications and Tendering equipment Purchase and installation of equipment, software etc.

College of Engineering Pune (COEP) Forerunners in Technical Education

ACTIVITY

6

7

8

9 10

11

April‐ Sept 13

Oct13‐ Mar14

April – Sept14

Oct14‐ Mar15

April15‐ Sept15

Oct 15‐ Mar16

Training to faculty team members, in relevance to procured items, by vendors, OR to enhance research competence in thematic area, at Higher learning centers, both in India and abroad Appointing research associates OR providing TA/RA scholarship to deserving candidates from among those admitted to PG/PhD programs Compilation of results, documentation and delivery of projects to concerned stakeholder Publications in Conferences and journals Organizing STTPs for faculty, skill development finishing courses for aspirants Outcomes such as filing and receiving patents, technology transfer, idea to prototype

4

8/29/2014

How would you assess the progress of CoE ( milestones)

College of Engineering Pune (COEP) Forerunners in Technical Education

S. No. 1 2

3

Deliverables Number of International Exchange programmes Number of co-authored publications in peer-reviewed journals with names of authors: (a) National ((b)) International Number of exchange of research students with collaborating institutions: (a) National (b) International

4

Number of exchange of research faculty with collaborating institutions: (a) National (b) International

5

Number of patents filed

Baseline (2010-11) 01 05 05

Targets to be achieved At the end of At the end Dec. 14 of Dec.15 02 03 From this From this CoE CoE 05 08 05 10

00 00

00 00

02 00

00 01

01 02

02 03

02 [From this 04 [From this CoE team] CoE team]

06 [From this CoE team]

College of Engineering Pune (COEP) Forerunners in Technical Education

5

8/29/2014

S. No.

Deliverables

Baseline (2010-11)

Targets to be achieved

At the end of Dec. 14

At the end of Dec.15

6

Number of external R&D projects

05

04 [From this COE team]

08 [From this CoE Team]

7

Number of Industry Chairs secured

00

00

01

8

Number of MoUs with academia: (a) National (b) International

02 02

04 03

06 04

9

Number of MoUs with industry: (a) National (b) International

02 01

05 05

08 08

10

Number of products, research and services commercialized

00

01

02

11 (i)

Any other (maximum three) Master enrolment in the thematic area

04

10

16 + 18 18*

(ii)

Ph.D enrolment in the thematic area

02

05**

08**

*if the new program starts ** if Ph.D admissions take place

College of Engineering Pune (COEP) Forerunners in Technical Education

Progress of CoE wrt these milestones

College of Engineering Pune (COEP) Forerunners in Technical Education

6

8/29/2014

S. No. 1

Deliverables Number of International Exchange programmes Number of co-authored publications in peer-reviewed journals with names of authors: (a) National (b) International Number of exchange of research students with collaborating institutions: (a) National (b) International

2

3

4

Number of exchange of research faculty with collaborating institutions: (a) National (b) International

5

Number of patents filed

02

Achieved to date 00

From this CoE 05 05

From this CoE 05 08

00 00

00 00

01 02

00 00

04 [From this CoE team]

04 [From this CoE team]

Target, Dec.14

College of Engineering Pune (COEP) Forerunners in Technical Education

S. No.

Targets to be achieved Deliverables Target, Dec.14

6

Number of external R&D projects

7

Number of Industry Chairs secured Number of MoUs with academia: (a) National (b) International Number of MoUs with industry: (a) National (b) International Number of products, research and services commercialized Any other (maximum three) Master enrolment in the thematic area Ph.D enrolment in the thematic area

8

9 10 11 (i) (ii)

Achieved to date

04 [From this COE team]

08

00

00

04 03

04 04

05 05

06 03

01

02 [in process] 10 05**

15 08

*if the new program starts ** if Ph.D admissions take place

College of Engineering Pune (COEP) Forerunners in Technical Education

7

8/29/2014

Fund status of CoE Release-200 lakhs Expenditure-13 lakh Expenditure in pipeline-290 lakh

College of Engineering Pune (COEP) Forerunners in Technical Education

Procurement status of CoE Equipment tendered [Estimated cost Rs. 290 lakhs]

College of Engineering Pune (COEP) Forerunners in Technical Education

8

8/29/2014

Equipment Identified

Funds Available : 290 lakhs

First Phase of Procurement [cost in lakhs] UNIT COST

SOLAR PV INVERTER TEST SYSTEM FOR SURROUND TESTING REAL TIME ELECTRICAL SYSTEMS (MAINLY POWER ELECTRONICS) SIMULATOR REAL TIME DIGITAL POWER SYSTEM SIMULATOR GRID INTERACTIVE SOLAR POWER PLANT INTEGRATED INDUSTRIAL DRIVE

65

NO OF UNITS 1 bundle

40 40 25 7.5

1 1 1 3

40 40 25 22.5

CUSTOM‐BUILT GENERIC INDUSTRIAL POWER TRANS. TEST SYSTEM

18

1

18

NAME OF THE EQUIPMENT

TOTAL 65

College of Engineering Pune (COEP) Forerunners in Technical Education

MODULAR POWER CONDITIONERS FOR RENEWABLE ENERGY

16

1 bundle

16

FREQUENCY RESPONSE ANALYZER

12

1

12

GAUSS METER

12

1

12

POWER SCOPE

4

3

12

HYSTERESIS LOOP TRACER FOR ELECTRICAL STEEL

12

1

12

DIESEL GENERATING SET 200 KVA CAPACITY MODIFIED FOR HEAT RECOVER FROM JACKET AND EXHAUST

10

FIVE GAS EXHAUST GAS ANALYZER FOR REAL TIME DATA ANALYSIS AND SMOKE METER FOR DIESEL ENGINES (200 KVA DG SET)

10

UPGRADATION OF AVAILABLE MAXWELL LICENCE AND PROCUREMENT OF BUNDLE OF 25 USERS FOR ACADEMIC PURPOSE

10

1

10

1

10

1 bundle

10

College of Engineering Pune (COEP) Forerunners in Technical Education

9

8/29/2014

DUAL MONITOR DESK TOP COMPUTERS NI‐CRIO/CDAQ CHASSIS AND CONTROLLER BATTERY BACKED UP MULTI‐CRYSTALLINE 5KWP SOLAR POWER PLANT NI , MY DAQ SYSTEM WITH ACCESSORIES NI‐SET NI SET OF IO MODULES FOR CRIO WASTE HEAT RECOVERY HEAT EXCHANGER CASCADED H BRIDGE MULTILEVEL BACK TO BACK AC –DC‐AC CONVERTER NI‐MYRIO SYSTEM WITH ACCESSORIES AND ADD ON MODULES, SET OF IO MODULES FOR CDAQ

0.36 9.5

24 1

9.6 9.5

8 8 8 8

1 1 1 1

8 8 8 8

8

1

8

7

1

7 370.6

College of Engineering Pune (COEP) Forerunners in Technical Education

Equipment Identified for Second Phase {additional funds required} THERMAL ENERGY STORAGE TRAINING SYSTEM PYRANOMETER FOR GLOBAL SOLAR RADIATION MEASUREMENT SOLAR THERMAL ENERGY SYSTEM PICO HYDEL POWER CUM CENTRIFUGAL PUMP TEST SETUP LAPTOP THIN FILM BASED GRID INTERACTIVE POWER PLANT PLANT‐ 5KWP TEXAS DSP CARDS SYNCHRONOUS‐DC‐INDUCTION MACHINE SET WITH TAILOR MADE TABLE TO FACILITATE EXPERIMENTATION TRANSIENT TORQUE SENSOR FOR FHP DYNAMOMETER SOLAR THERMAL PARABOLIC TROUGH COLLECTOR TRAINING SYSTEM DIGITAL BOMB CALORIMETER WITH NEW EASY FIT GAS FILLING SYSTEM AND INTEGRATED CONTROLLER WITH PRINTER CURRENT PROBES FOR YOKOGAWA POWER INSTRUMENTS HANDHELD THERMAL IMAGER SOLAR ARRAY SIMULATOR MEGAOHM METER

7

7

3.5

7

7 7 0.55 65 6.5

2 1 1 12 1

7 7 6.6 65 6.5

6

1 BUNDLE

6

1.5 6

4 1

6 6

5

5

5

5 1

5 4.4 4 4

1 BUNDLE 1 1 1

5 4.4 4 4

College of Engineering Pune (COEP) Forerunners in Technical Education

10

8/29/2014

MICROOHM METER SOLAR PV GRID TIED TRAINING SYSTEM PYRHELIOMETER FOR SOLAR BEAM RADIATION MEASUREMENT SOLAR THERMAL TRAINING SYSTEM (FLAT PLATE COLLECTOR BASED SYSTEM) THREE PHASE POWER AND HARMONICS TRAINING CASE WEATHER MONITORING STATION INSULATED HOT WATER STORAGE TANK MICROCONTROLLER BOARDS HANDHELD DIGITAL LUMINANCE METER OFF GRID 2KWP MULTI‐CRYSTALLINE DC SYSTEM MULTI OUTPUT DC POWER SUPPLY: QUANTITY [04] CLAMP‐ON TYPE EARTH TESTER SMD SOLDERING PRACTICE KIT FOR PCB ASSEMBLY WITH SMT DEVICES SINGLE PHASE CLAMP ON POWER METER

4 3.75 3.5

1 1

3.25

4 3.75 3.5 3.25

3 3 3 3 3 2.5 0.3 2

1 1 1 1 BUNDLE 1 1 8 1

3 3 3 3 3 2.5 2.4 2

2 0.6

1 3

2 1.8

Additional funding required : 120 lakhs

College of Engineering Pune (COEP) Forerunners in Technical Education

Manpower requirement of CoE 6 Research Engineers [M.Tech qualified]- Appointed 1 Research Manager-To be appointed j Facultyy To be appointed pp [[Two identified]] 4 Adjunct

College of Engineering Pune (COEP) Forerunners in Technical Education

11

8/29/2014

PG enrolment in Thematic Areas Sr.No. Project Title Project Guide RTDS simulation of vWAM based monitoring and SSD 1 protection system A Fast flux search controller for efficiency optimized SVJ 2 induction motor D i and Design d Development D l t off Switched S it h d Reluctance R l t motor t RTU & BNC 3 for Textile Mill Application Modeling, Design and Analysis RCD clamped forward VSR 4 converter 5 1 Kw Solar Source Connected to Microgrid BNC Shunt Active power filter based on Instantaneous AAD& DBT 6 reactive power theory. A smart Power Quality Analyzer using Labview for COEP BNC & SB 7 substation 8 Modelling, Controlling, and protection of DC microgrid SSD Analysis of Electromechanical Disturbance Propagation SSD & AP 9 in Interconnected Power System Improved Distance Relaying using Calibrated SSD &VAA 10 Instrument Transformer with Synchrophasor Application

Year 2013‐2014 2013‐2014 2013 2014 2013‐2014 2013‐2014 2013‐2014 2013‐2014 2013‐2014 2013‐2014 2013 2014 2013‐2014 2013‐2014

College of Engineering Pune (COEP) Forerunners in Technical Education

Project Guide

Sr.No. Project Title

11 12 13 14 15 16 17 18 19 20

Dynamic Stability Analysis of Various WindTurbine Connected VNP Power Systems Design of Controller For Unified Power Flow Controller (UPFC) VSB Using Sliding Mode Controller (SMC) Strategies Design, Simulation and Hardware Fabrication of Step down SSD DC‐DC Converter along with Control Strategy Development Optimal Placement and sizing of Dispersed Generation in SPG distributed networks using Genetic Algorithm Analysis, Modeling and Design of Controller for Two‐Switch VSR Forward Converter Design and Development 42V Permanent‐Magnet Brushless RTU DC Motor for Radiator Fan Accurate Synchrophasors Based Fault Location Method for VNP Emerging Distribution Systems Protection of complex transmission network in Smart Grid SSD Accurate Phase Comparison Scheme with Synchronised SSD Measurements Performance enhancement of line start permanent magnet BNC motor

Year

2013‐2014 2013‐2014 2013‐2014 2013‐2014 2013 2014 2013‐2014 2013‐2014 2013‐2014 2014‐2015 2014‐2015 2013‐ 2014

College of Engineering Pune (COEP) Forerunners in Technical Education

12

8/29/2014

PATENTS APPLIED FOR [TILL DATE]

1 2 3 4

A Poly Phase Field Assisted Transverse Flux Switched Reluctance Machine Hybrid Excited Transverse Flux Generator E‐Core Poly‐phase Brushless Transverse Flux Motor/Generator E‐Core Transverse Flux Generator

College of Engineering Pune (COEP) Forerunners in Technical Education

ACADEMIC PRODUCTS UNDER DEVELOPMENT

Sr. No 1 2 3 4

h Academic d i Product d Name off the CUSTOM‐BUILT GENERIC INDUSTRIAL POWER TRANSMISSION TEST SYSTEM Integrated Industrial Drive Modular Power Conditioners for Renewable Energy PICO Hydel H d l Power P cum Centrifugal C if l P Pump TTest SSetup

College of Engineering Pune (COEP) Forerunners in Technical Education

13

8/29/2014

CUSTOM-BUILT GENERIC INDUSTRIAL POWER TRANSMISSION TEST SYSTEM

College of Engineering Pune (COEP) Forerunners in Technical Education

MODULAR POWER CONDITIONER

College of Engineering Pune (COEP) Forerunners in Technical Education

14

8/29/2014

OTHER ACTIVITIES

• Organized Four experts lectures for PG students, in last 6 months • 46 M.Tech students sponsored to attend conference in the domain. • 10 0 Faculty y members supported pp to attend the workshop p/S Seminar / Conference • Co-organizer or a national conference hosted by University of Pune • 4 new academic products are finalized along with 2 industry partners to enrich laboratory infrastructure. These products are innovative, and will probably be first-of-its-kind, in the country. • Two faculty members are deputed under international faculty exchange program

College of Engineering Pune (COEP) Forerunners in Technical Education

Status of Ph.d programes wrt CoE Ph. D candidates enrolled/ awarded and number Ph.D candidates working in the broad area of Center objective-08

College of Engineering Pune (COEP) Forerunners in Technical Education

15

8/29/2014

Any efforts taken by CoE for transfer of knowledge to society in general and industry in particular Four academic products are being developed in association with industry partners. Once the development and successful installation is completed, the product will be jointly launched under the “COEP LABS”. We have already developed FOUR academic products during TEQIPI, which have fetched the attention of peer and higher level institutes.

College of Engineering Pune (COEP) Forerunners in Technical Education

College of Engineering Pune (COEP) Forerunners in Technical Education

16

8/29/2014

Something Noteworthy As a part of Center Activity, an ambitious, first-of-its-kind, multi-aspect, multi-domain project is undertaken titled as, “Design and Development of MICRO-GRID at COEP. This will be developed as Project Work at PG/UG, and will facilitate the Research in the focused domain of the Center. The project is “By the STUDENTS, FOR THE STUDENTS”

College of Engineering Pune (COEP) Forerunners in Technical Education

17

8/29/2014

College of Engineering Pune (COEP) Forerunners in Technical Education

THANK YOU !!

College of Engineering Pune (COEP) Forerunners in Technical Education

18