TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

BRIEF DESCRIPTION

UNIT

QTY.

1.1

Earth work in excavation by mechanical means (Hydraulic excavator) / manually means over areas (not exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan ) including dispoasl of excavated earth, lead upto 50 m and lift upto 1.5m, dispoasl earth to be levelled and neately dressed .(a) All kinds of soil.

Cum

100.00

1.2

Filling available excavated earth(Excluding rock) in trenches,plinth sides of foundation etc in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming & watering, lead upto 50m & lift upto 1.5m.

Cum

95.00

1.3

Supplying and filling in plinth and basement with fine sand under floors including watering, ramming, consoldating and dressing complete.

Cum

35.00

1

Rate(Rs) In figures

In Words

Amount(Rs)

EARTH WORK

SUB TOTAL 2

CONCRETE WORK

2.1

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level (a) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Cum

75.00

2.2

Providing and laying cement concrete in kerbs, steps and generator foundation and the like at or near ground level excluding the cost of centring, shuttering and finishing (a) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Cum

56.00

2.3

Providing and laying damp-prof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size)

Sqm

10.00

2.4

Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7 kg per squre metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Sqm

10.00

2.5

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Sqm

55.00

2.6

Brick edging 7cm wide 10cm deep to plinth protection with bricks of class designation 75 ( Size 200x100x100mm) including grouting with cement mortal 1:4 (1cement : 4 fine sand)

Mtr

84.00

SUB TOTAL

SEAL/ SIGNATURE OF BIDDER Page 1 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

UNIT

QTY.

3.1

Providing and laying in position specified grade of reinforcement cement concrete excluding the cost of centring, shuttering, finishing and reinforcementAll work upto plinth level a) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size )

Cum

55.00

3.2

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree ,landing, balconies,shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral stair cases upto floor five level excluding cost of centering , shuttering , finishing and reinfircement 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size )

Cum

175.00

Cum

10.00

3

3.3

3.5

BRIEF DESCRIPTION

Reinforced cement concrete work in walls(any thickness)including attached pilasters,buttresses,plinth and string courses ,fillets,columms,pillars,piers,abutments,posts,and struts etc.upto floor five level excluding cost of centering , shuttering , finishing and reinfircement 1:1.5:3 (1 cement : !.5 coarse sand : 3 graded stone aggregate 20mm nominal size ) Centering and shuttering including strutting, propping etc. and removal of form for: (a) foundations, footings, bases of columns etc., for mass concrete

Sqm

200.00

c

(c) suspended floors, roofs, landings, balconies and access platform

Sqm

367.00

d

(d) lintels, beams, plinth beams, girders, bressumers and cantilevers

Sqm

500.00

e

(e) columns, pillars, piers, abutments, posts and struts

Sqm

450.00

f

(f) Shelves (cast in situ)

Sqm

15.00

Sqm

100.00

Kgs

30,000.00

Mtr

20.00

3.6 3.7

In Words

Amount(Rs)

Reinforcement Cement Concrete Work

a

g

Rate(Rs) In figures

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete. Add or deduct for plaster drip course /groove in plastered surface or moulding to R.C.C. projections.

SUB TOTAL

SEAL/ SIGNATURE OF BIDDER Page 2 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

BRIEF DESCRIPTION

UNIT

QTY.

4.1

Brick work with F.P.S. bricks of class designation 75 (Size 200 x 100 x 100 mm ) in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand ).

Cum

20.00

4.2

Brick work with F.P.S. bricks of class designation 75 (Size 200 x 100 x 100 mm ) in cement mortar 1:6 (1 cement : 6 coarse sand ) in superstructure above plinth level upto floor V level .

Cum

190.00

4

4.3

4.4

Rate(Rs) In figures

In Words

Amount(Rs)

BRICK WORK

Half brick masonry with bricks of class designation 75 (Size 200 x 100 x 100 mm ) in cement mortar 1 : 3( 1 cement: 3 coarse sand ) Sqm. in superstructure above plinth level upto floor V level. Extra for providing and placing in position 2 Nos. 6mm dia M.S. bars at every third course of half Sqm. brick masonary (with F.P.S. bricks).

50.00

50.00

SUB TOTAL

SEAL/ SIGNATURE OF BIDDER Page 3 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

BRIEF DESCRIPTION

UNIT

QTY.

5.1

Providing and fixing ISI marked steel glazed doors, windows and ventilators side/top/centre hung with beading and all members such as K11 B and K12 B etc. complete of standard rolled steel section, joints mitred and flash butt welded with sash bars tenoned and rivited with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x10cm of 1:3:6(1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of hinges, pivots, float glass panes with glazing clips and special metals sash putty of approved make and a priming coat of approved steel primer ; excluding the cost of metal beading and other fitting except necessary hinges or pivots complete as per approved design.

Kg.

800.00

5.2

Providing and fixing pressed streel door frames confirmingf to ISI: 4351 manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50X25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to Mtr. each jamb including steel butt hinges2.5mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-incharge. (a) Profile B

175.00

5

5.3

5.4

5.5

5.6

5.7

5.8

Rate(Rs) In figures

In Words

Amount(Rs)

STEEL WORK

Structure steel work welded in builtup section, trusses and framed worke including cutting, hoisiting, fixing in position and applying a priming coat of approved steel primer including M.S round holding down boults and nuts and washer plate all complete. Steel work in built up tubular trusses inlcuding cutting, hoisting fixing in positing and applying a priming coat of approved steel primer, welded and bolted including M.S. round holding down bolts with nuts and washer plates complete as per approved design drawings. Providing and fixing M.S.and grills of required pattern in frames of windows etc with M.S. flats, square or round bars etc all complete. (a) Fixed to steel windows by welding Fancing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and and corner post shall be strutted on both sides and and post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire 9.38 kg per 100 m (minimum) beteen the two posts fitted and fixed with G.I.Staples, turn buckles etc complete. (Cost of posts, struts, earth work and concrete work to be paid for seperately) :- Payment to be made per metre cost of total length of barbed wire used. a) With G.I. barbed wire Supplying at site Angle iron post & strut of required size including botton to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10mm etc complete. Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer. G.I. pipes.

Kg.

500.00

KG

300.00

Kg.

80.00

Mtr.

2,000.00

Kg.

642.00

kg

40.00

SEAL/ SIGNATURE OF BIDDER Page 4 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

BRIEF DESCRIPTION

UNIT

QTY.

Rate(Rs) In figures

In Words

Amount(Rs)

SUB TOTAL

SEAL/ SIGNATURE OF BIDDER Page 5 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

BRIEF DESCRIPTION

6

WOOD WORK Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws excluding, panelling which will be paid for separately. Kiln seasoned and chemically treated Hollock wood.

6.1

6.2

UNIT

QTY.

35 mm thick shutters

Sqm

20.00

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Ply wood 12 mm thick :

Sqm

15.00

A

Providing and fixing ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers Sqm. on both faces of shutters (a) 35 mm thick with screws for butt hinges. Extra for cutting rebate in flush door shutters (Total area of the shutter to be Sqm. measured ) Providing and fixing ISI marked oxodised M.S. Sloiding door bolts with nuts etc. complete:300 X 16 mm Each

B

250 X 16 mm

6.1

6.2 6.3

6.4

In Words

Amount(Rs)

50.00

50.00

6.00

Each

25.00

Providing and fixing ISI marked oxodised M.S. tower bolts black finished, (Barrel type) with necessary screws.

A

250 X 10 mm

Each

33.00

B

200 X 10 mm

Each

33.00

C

150 X 10 mm

Each

5.00

6.5

Rate(Rs) In figures

Providing and fixing ISI marked oxodised M.S. handles conforming to IS:4992 with necessary screws etc. complete.

A

125 mm

Each

33.00

B

100 mm

Each

33.00

SEAL/ SIGNATURE OF BIDDER Page 6 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

UNIT

QTY.

6.6

Providing and fixing oxodised M.S. casement stays (straight peg type) with necessary screws etc. complete. (a) 300mm Each weighing not less than 200 gms.

32.00

6.7

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

6.8

BRIEF DESCRIPTION

Twin rubber stopper

each

31.00

Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality).

each

6.00

Rate(Rs) In figures

In Words

Amount(Rs)

SUB TOTAL

SEAL/ SIGNATURE OF BIDDER Page 7 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No 7

7.1

BRIEF DESCRIPTION

UNIT

QTY.

Kgs

40.00

kg

20.00

each

2.00

Sqm

60.00

Rate(Rs) In figures

In Words

Amount(Rs)

ALUMINIUM WORKS Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixed with raw/plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluninium strap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): For fixed section

A

Powder coated aluminium (minimum thickness of powder coating 50 micron)

B

For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for dixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)

7.2

7.4

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate providing and fixing galazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer- in charge. (Cost of aluminium snap beading shall be paid in basic item) (a) With float glass panes of 5.50mm thickness

SUB TOTAL

SEAL/ SIGNATURE OF BIDDER Page 8 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

BRIEF DESCRIPTION

UNIT

QTY.

8.1

Cement concrete flooring 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate ) finished with a floating coat of neat cement including cement slurry but excluding cost of nosing of steps etc. complete. (a) 40 mm thick with 20 mm nominal size stone aggregate.

Sqm

25.00

8.2

Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : sqm

50.00

sqm

15.00

25 mm thick.

sqm

145.00

Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

sqm

20.00

sqm

10.00

Sqm

30.00

8

8.5

8.6

8.8

Amount(Rs)

Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : Raj Nagar plain.

8.4

In Words

FLOORING

Ordinary cement without any pigment.

8.3

Rate(Rs) In figures

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre . Providing and fixing 1st quality ceramic glazed tiles confirming to IS : 15622 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY KAJARIA , or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting , riser of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand ) and jointing with grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigment of matching shades complete.

SEAL/ SIGNATURE OF BIDDER Page 9 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

8.9

8.9

BRIEF DESCRIPTION Providing and laying rectified Glazed ceramic floor tiles 300mmX300mm (thickness to be specified by manufacturer) of 1st quality confirming to IS : 15622 of approved make in colours such as white, Ivory, grey, Fume Red brown laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand ) including grouting the joints with white cement matching pigment etc. complete. Providing and laying Glazed ceramic floor tiles 300mmx300mm (thickness to be specified by manufacturer) of 1st quality confirming to IS : 15622 of approved make in colours such as white, Ivory, grey, Fume Red brown laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand ) including grouting the joints with white cement matching pigment etc. complete.

UNIT

QTY.

Sqm

65.00

Sqm

200.00

8.11

Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.

metre

40.00

8.12

Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement : 3 coarge sand) finished with a floating coat of neat cement. a) 18 mm thick

Sqm

5.00

Rate(Rs) In figures

In Words

Amount(Rs)

SUB TOTAL

SEAL/ SIGNATURE OF BIDDER Page 10 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

UNIT

QTY.

With residual type petroleum bitumen of penetration 80/100

sqm

400.00

9.2

Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.

sqm

350.00

9.3

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase

metre

80.00

9.4

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete.

each

6.00

9.5

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm

each

45.00

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

each

6.00

each

6.00

each

6.00

each

6.00

9

9.1

9.6

9.7 a

BRIEF DESCRIPTION

Amount(Rs)

ROOFING

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler

Bend 87.5° 110 mm bend

c

In Words

Painting top of roofs with bitumen of approved quality at 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cu dm per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete :

110 mm b

Rate(Rs) In figures

Shoe (Plain) 110 mm Shoe

SUB TOTAL

SEAL/ SIGNATURE OF BIDDER Page 11 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No 10

BRIEF DESCRIPTION

UNIT

QTY.

12mm cement plaster of mix 1:6 (1 cement :6 fine sand )

Sqm

1,250.00

10.2

15 mm thick cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement :6 fine sand).

Sqm

1,250.00

10.3

6 mm plaster to ceiling and other exposed unfinished RCC surfaces of mix 1:3 (1 cement: 3 fine sand).

Sqm

550.00

10.4

12mm cement plaster finished with a floating coat of neat cement in mix 1:3 (1 cement :3 fine sand )

Sqm

50.00

10.5

Whitewashing with lime to give even shade (a) on new work(Three or more coats

Sqm

500.00

10.6

Finishing walls with Acrylic Smooth exterior paint of required shade :

1o.7

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).

sqm

650.00

10.8

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. (a) Two or more coats on new work.

Sqm

1,250.00

10.9

Applying priming coat : sqm

170.00

sqm

130.00

Sqm

300.00

b

c

In Words

Amount(Rs)

FINISHING

10.1

a

Rate(Rs) In figures

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: (a)Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

SUB TOTAL

SEAL/ SIGNATURE OF BIDDER Page 12 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No 11

11.1

11.2

11.3

11.4

11.5

11.6

BRIEF DESCRIPTION

UNIT

QTY.

Rate(Rs) In figures

In Words

Amount(Rs)

SANITARY Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid,10 liters low level white PVC flushing cistern with manually control device(Handle lever) confirming to IS 7231 with all fittings & Each fixtures including jet all complete including cutting and making good the wall and floor wherever require. (a) W.C. pan with ISI marked white soild plastic seat and lid. Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap. 10 litre low level white P.V.C. flushing cistern with manufally controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the wallsand Each floors wherever required: i) White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests Providing and fixing white vitreous china flat back or half stall urinal of 580x380x350 mm with white PVC automatic flushing cistern, Parryware/Hindware/Seabird/Orient (coral) with fittings, standrad C.P. brass flush pipe, spreaders with unions and clamps ( all in C.P.brass ) with waste Each fitting as per IS:2556,C.I.trapwith outlet grating and other couplings in C.P.brass including painting of fittings and brackets, cutting and making good the walls and floors wherever required: (a) Range of two half stall urinals with 10 litres P.V.C. automatic flushing cistern. Providing and fixing wash basin with C.I./M.S. brackets, 15 mm C.P. brass pillar taps, Kingston/Gem/Techno/Parko, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the Each walls wherever required : (a) Flat back wash basin size 630X450mm with pair of 15mm CP brass pillar taps. Providing and fixing Stainless Steel A ISI 304 ( 18/8) kitchen sink as per I.S. 13983 with C.I. Brackets and stainless steel plug 40 mm including painting of fittings and brackets , cutting and making good the walls wherever required :- Each Kitchen sink without drain board a) 610X510 mm bowl depth 200mm

6.00

2.00

3.00

10.00

1.00

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete- Flexible pipe

A

40mm dia

Each

1.00

B

32 mm Dia

Each

10.00

11.7

Providing and fixing 600X450mm bevelled edges mirror of superior glass (of approved quality ) complete with 6mm thick hard board ground fixed to wooden Each cleats with C.P. brass screws and washers complete

13.00

11.8

Providing and fixing PVC pipes with chemical resins water tights with cost of all materiala like bend etc complete incuding trenching and backfilling wherever requirerd

a

(i) 110mm dia

Mtr

200.00

b

(ii) 75mm dia

Mtr

300.00

SEAL/ SIGNATURE OF BIDDER Page 13 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

BRIEF DESCRIPTION

11.9

Providing & fixing PVC specials of approved make including jointing fixing in positions necessary concreting etc complete as instructions of Engtineer in charge

UNIT

QTY.

a

(i) Bend 110mm inner dia

Each

8.00

b

(II) 75mm dia

Each

8.00

c

Single Tee with door 110X110X110mm

Each

6.00

d

Single Tee with door 75x75x75mm

Each

6.00

100 mm inlet and 75 mm outlet

Each

32.00

Providing and fixing MS stays and clamps for PVC pipes a) 110mm dia

Each

40.00

b) 75 mm dia

Each

30.00

Mtr

100.00

Mtr

100.00

11.10

11.11

12 12.1 B

12.2

B

12.3

Rate(Rs) In figures

In Words

Amount(Rs)

(ii)Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

DRAINAGE Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. Complete 150 mm dia Providing and laying cement concrete 1:5:10 mix (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design (a) 150 mm diameter S.W. pipe

Providing and fixing square-mouth S.W. gully trap grade 'A' complete with C.I. grating brick masonary chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame Each to be not less than 2.70 kg as per standard design : (a) With F.P.S. bricks class designation 75 (Size 200 x 100 x 100 mm )

10.00

SEAL/ SIGNATURE OF BIDDER Page 14 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

BRIEF DESCRIPTION

UNIT

12.4

Constructing brick masonary manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand :8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone Each 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimentions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight offrame 15 kg ) (a) With FPS Bricks with class designation 75 (Size 200 x 100 x 100 mm )

12.5

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With F.P.S. bricks class designation 75 (Size 200 x 100 x 100 mm )

12.6

QTY.

Rate(Rs) In figures

In Words

Amount(Rs)

2.00

each

5.00

metre

2.00

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 om dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm Each diameter. 1.8 m long complete as per standard design i) With F.P.S. bricks (Size 200 x 100 x 100 mm )

2.00

Extra for depth for manholes Size 120x90 cm With F.P.S. bricks class designation 75 (Size 200 x 100 x 100 mm )

12.7

SUB TOTAL

SEAL/ SIGNATURE OF BIDDER Page 15 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

BRIEF DESCRIPTION

UNIT

QTY.

13

A

WATER SUPPLY Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall ( i ) 15 mm dia nominal bore

Mtr

250.00

B

( ii ) 20 mm dia nominal bore

Mtr

50.00

15 mm dia. nominal bore

metre

50.00

20 mm dia. nominal bore

metre

125.00

25 mm dia. nominal bore

metre

25.00

13.1

13.2

Rate(Rs) In figures

In Words

Amount(Rs)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall.

13.3

Providing and fixing galvanised iron pipes complete with galvanised iron fittings including trenching and refilling etc. (external work)

A

( i ) 15 mm dia nominal bore

Mtr

50.00

B

( ii ) 20 mm dia nominal bore

Mtr

100.00

C

( ii ) 25 mm dia nominal bore

Mtr

100.00

13.4

13.5

13.6

Providing and fixing C.P. brass bib cock of approved quailty conforming to IS : Each 8931. (a) 15 mm dia nominal bore Providing and fixing C.P. brass long nose bib cock of approved quailty conforming to IS standards and weighing not less than 810 gms. Each (a) 15 mm dia nominal bore

15.00

7.00

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore.

each

7.00

13.7

Providing and fixing C.P. brass shower rose with 15 or 20mm (a) 100mm dia

Each

7.00

13.8

Providing and fixing PTMT Stop cock of approved quality and colour :- 15mm nominal bore, 86mm long. Weighing not less than 88gms.

Each

35.00

13.9

Providing and fixing PTMT Stop cock of approved quality and colour :- 20mm nominal bore, 86mm long. Weighing not less than 88gms.

Each

6.00

13.10

Painting G.I. Pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.

A

15 mm dia. nominal bore

metre

50.00

B

20 mm dia. nominal bore

metre

125.00

SEAL/ SIGNATURE OF BIDDER Page 16 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

BRIEF DESCRIPTION 25 mm dia. nominal bore

13.12

UNIT

QTY.

metre

25.00

A) 15 mm dia. Nominal bore

Each

25.00

B

B) 20 mm dia. Nominal bore

Each

25.00

C

B) 25 mm dia. Nominal bore

Each

25.00

Providing and fixing Brass Gate Valve in G.I. puipe B) 20 mm dia. Nominal bore

Each

6.00

B) 25 mm dia. Nominal bore

Each

2.00

13.14

13.15

13.16

In Words

Amount(Rs)

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New Work).

A

13.13

Rate(Rs) In figures

Providing and fixing G.I. tank nipple including mAking connection to the PVC tank. Each B) 20 mm dia. Nominal bore Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats Each complete (a) 20mm nominal bore

6.00

6.00

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable looking arrangement and making necessary holes for Per litre 8,000.00 inlet, outlet and overflow pipes but without fittings and the base support for tank SUB TOTAL

SEAL/ SIGNATURE OF BIDDER Page 17 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

BRIEF DESCRIPTION

UNIT

QTY.

Rate(Rs) In figures

In Words

Amount(Rs)

Pile Work Boring, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M 20 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 300 mm dia piles.

metre

395.00

Extra over item No. 20.3 for providing additional bulb in under reamed piles, under specified dia meter (Only the quantity of extra bulbs are to be paid). 300mm dia piles.

each

100.00

SUB TOTAL

Total Civil

SEAL/ SIGNATURE OF BIDDER Page 18 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

UNIT

QTY.

1.1

Wiring for light pt. / fan pt. / exhaust fan pt. / call bell pt. with 1.5 sq.mm. PVC insulated, copper conductor singale core cable in surface/recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box Point and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor singale core cable etc as required. Group B

119.00

1.2

Wiring for 3 pin 5/6 amps. Plug point with 1.5 sq.mm. PVC insulated, copper conducter cable including providing and fixing 3 pin 5/6 amps. socket outlet on switch board, (in surface/ recessed PVC conduit wiring system) and 5/6 amps. Point tubler /piano type switch/earthing the 3rd pin, painting etc. as required.

35.00

1.3

Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated, copper conductor single core cable in surface/recessed PVC conduit along with 1 No. Metre with 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.

700.00

1.4

Wiring for circuit wiring alongwith earth wire with the 2x2.5 sq. mm + 1x2.5 sq.mm earth wire sizes of PVC insulated copper conductor, single core cable in Metre srface/ recessed PVC conduit as required

600.00

1.5

Wiring for circuit/ submain wiring alongwith earth wire with 2x1.5 sq.mm. + 1x1.5 sq. mm earth wire of PVC insulated, copper conductor, single core cable Metre in surface/ recessed PVC conduit as required.

1,120.00

1.6

Supply and fixing metal box of 180 mm x 100 mm x 60 mm deep size on surface or in recess with suitable size of phenolic laminated sheet cover in front Each including painting etc as required.

55.00

1.7

Supplying and fixing 6 way, three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper busbar, Each neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required.

1.00

1.8

Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuit breaker suitable for inductive load of singale pole in the existing MCB DB Each complete with connections, testing and commissioning etc. as required.

20.00

1.9

Supplying and fixing 63 amps rating, four pole, 415 volts, isolator in the existing Each MCB DB complete with connection, testing and commissioning etc. as required.

1.00

1

BRIEF DESCRIPTION

Rate(Rs) In figures

In Words

Amount(Rs)

Electric work

TOTAL

SEAL/ SIGNATURE OF BIDDER Page 19 of 20

TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED BINA-KURWAI-SIRONJ BOT ROAD PROJECT IN THE STATE OF MADHYA PRADESH CONSTRUCTION OF ADMINISTRATIVE BUILDING AND OTHER ALLIED WORKS AT TOLL PLAZA (CH: 15+000) ON BINA – KURWAI – SIRONJ ROAD PROJECT IN THE STATE OF MADHYA PRADESH TENDER NO. TCIL/VHS/NIT/BKS/11-12/CIVIL/41/RC-I

BILL OF QUANTITIES Sl No

BRIEF DESCRIPTION

UNIT

QTY.

sqm

35.00

sqm

155.00

supplying and fixing 5/6 amps switch piano type switch/socket on existing switch Each box/ cover including connections etc. as reqd.

35.00

Rate(Rs) In figures

In Words

Amount(Rs)

NON SCHEDLE ITEM (Civil Works)

1

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

2

Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 60x60 cm

NON SCHEDLE ITEM ( Electrical Works) 1 2

3

4

5

6

7

Supplying and fixing 6 Pin 15/16 amps socket outlet piano type switch/socket on existing switch box/ cover including connections etc. as reqd. Supplying, Installation, Testing and Commissoning of surface lumineries made out of CRCA sheet steel housing with white reflector filled to the body along with HF ballast & FTL 1X36/40 W floouracent lamp etc. complete as per site requirement. (BJCEB 136/140 WEB of M/s Bajaj or similar superier make. Supplying, Installation, Testing and Commissoning of intigral petrol station lumineres for asymmetic light distribution for conpoy of Toll Plaza, complete will all accessories i/c 250 watts lamp etc as per site requirement (BJ PP MHI - 250 OF Bajaj or Similar Superior make) Supplying, installation, testing & commissioning of Electric Ceiling fan of the 1200 mm sweep sizes , capacitor type, with double ball bearing complete with 300mm down rod, canopies, shackles, blades, with regulator, suitable for operation on 230V, 50 Hz single phase AC supply confirming to IS St. or Supplying, installation, testing & commissioning of wall fan 600 mm sweep etc. as per site requirement.(Compton/ Usha or similar uperior make) Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connections, testing, commissioning and fixing the louvers/shutters complete with frame etc. as reqd. (M/s Crompton similer suprior make)

Each

20.00

Each

45.00

Each

12.00

Each

26.00

Each

11.00

Supplying and laying 1.1 KV grade 4 core 16 sq. mm. PVC insulated copper Metre armoured cable in ground/ surface, channel etc. as per site requirement.

30.00

Total Electrical(B) Grand Total(A+B)

SEAL/ SIGNATURE OF BIDDER Page 20 of 20