Benefits of CSS technology in European DBS systems

RFICs Beneﬁts of CSS technology in European DBS systems Traditional satellite system installations require a separate cable from the satellite outdoo...

Author: Vivien Cunningham

1 downloads 1 Views 4MB Size

Report

Download PDF

Recommend Documents

DBS ENTREPRENEURS DBS BUSINESS DBS BUSINESS ODCC

CSS: a Language and Technology

DBS-Newsletter. DBS-Athleten gewinnen 28 WM-Medaillen in Lyon

Employment and Benefits in the European Union

EUROPEAN SOURCING IN ASIA: KEY BENEFITS & CHALLENGES

1. Technology Introduction & Benefits

Benefits of using European Standards for eprocurement

Biogas in Germany. Development, Technology and Benefits

Review of European Planning Systems

Usage of RFID Technology in Supply Chain: Benefits and Challenges

BENEFITS OF AGILE METHODOLOGIES IN MANAGING PROJECTS INFORMATION TECHNOLOGY (IT)

css:

The benefits and limitations of assistive technology

HTML & CSS In Pictures

PRESSRELEASE. Benefits of indirect cooling systems in heavy commercial vehicles

CSS

European leader in advanced technology solutions

CSS anwenden. CSS Die Basis

process technology Environmental Benefits Statement

XDCAM Workflow Features, Benefits & Technology

nasha TeChnOLOGy The key benefits

EUROPEAN TECHNOLOGY PLATFORMS

RFICs

Beneﬁts of CSS technology in European DBS systems Traditional satellite system installations require a separate cable from the satellite outdoor unit to each STB and to each tuner in each STB. Thus, PVR STBs and multituner STBs require multiple cables per box. Installation upgrades to PVRs or adding STBs requires new cable drops, adding cost to the equipment and installation for the consumer. Channel stacking switch (CSS) technology dramatically reduces the cost of installation by delivering multiple satellite channels on a single cable within the home. This article addresses system design challenges and performance requirements of European DBS systems using CSS technology. By Bill Windsor and Peter Wong

I

n traditional European digital broadcast satellite (DBS) installations, each tuner is connected directly to the satellite ODU with a dedicated coaxial cable. Cabling must be added when additional STBs or PVR STBs are added. Installing additional cabling has many drawbacks:  Truck rolls are expensive.  Wiring and installation is complex and time consuming.  Multiple cables are required around the dwelling.  Homeowners’ associations or local ordinances may restrict access.

��

��

CSS technology and solution

The drawbacks are eliminated by channel stacking switch (CSS) systems. Figure 1 illustrates how CSS technology operates: CSS translates, ﬁlters and performs frequencydivision multiplexing (channel stacking) onto a single cable, based on channel requests from multiple STBs and tuners connected to that cable. A single cable drop from the ODU provides each STB tuner with a dedicated frequency band, eliminating the need for multiple cables. Figure 1 shows a multiswitch CSS product and application, and Figure 2 shows an integrated LNB CSS application. Figure 2 shows the signal ﬂow diagram in the satellite ODU’s low-noise block (LNB). Satellite signals are received by the satellite dish, ampliﬁed by the low-noise ampliﬁer (LNA), and mixed down to IF. In European DBS systems, the received satellite signals are downlinked in two polarizations, horizontal (H) and vertical (V) over the 10.7 GHz to 12.75 GHz frequency range. Since STB tuners can only tune over 1.2 GHz of bandwidth (950 MHz to 2150 MHz) and the downlinked satellite signals cover

40

703RFDF4.indd 40

��

��

��

��

��

��

Figure 1. European DBS system with channel stacking technology. CSS technology enables a single cable to drive multiple STBs and tuners.

www.rfdesign.com

March 2007

3/16/2007 2:59:07 PM

RF Design

703RFDF4.indd 41

www.rfdesign.com

41

3/16/2007 2:59:07 PM

��

2.05 GHz of bandwidth, the incoming signal is split into two bands (low and high) and each band is down mixed within the 950 MHz to 2150 MHz IF bandwidth. European legacy STB ports are passthrough ports that accept the IF input signal, amplify it, and enable channel selection from the European legacy STB. This functionality enables installs for current satellite TV users who wish to keep their existing STBs. A block diagram of a six-stacked channels reference design is shown in Figure 3. The example CSS system shown accepts four 1 GHz inputs, which represent the full signal bandwidth of one European DBS satellite. The signals are stacked onto the 950 MHz to 2150 MHz IF band. A particular transponder of interest is converted to the desired user band and passed through a dedicated SAW ﬁlter. Each IC can process three channels and the outputs of both ICs are combined using a printed structure on the printed circuit board. The RF5210 architecture can process up to 12 stacked channels in the 950 MHz to 2150 MHz band using four CSS chips. Figure 4 shows the modulated CSS single cable output within the 950 MHz to 2150 MHz band (L-band tuning frequency range for European STBs), with six user bands selected from the satellite inputs to drive six individual tuners (up to 12). Each user band (each tuner) can independently tune to any satellite transponder. The CSS chips achieve excellent integrated phase noise performance of substantially less than 1 rms, which is negligible when added to standard LNB phase noise performance. Therefore, adding CSS functionality results in virtually no degradation in video lock and video continuity performance of the LNB. The traditional universal quad LNB includes a built-in multiswitch and four outputs that requires four cables. The CSS LNB design can eliminate the multiswitch and transmit two to 12 outputs down one cable, reducing overall BOM and installation costs. CSS technology requires an extension to the existing communications protocol between the STBs and the ODU. CENELEC, the European Committee for Electrotechnical Standardization, is ratifying an extension of the digital satellite equipment communications (DiSEqC) standard to support the necessary communications and enable users to send channel requests from the STB to the ODU. STB manufacturers have already endorsed the emerging standard, and currently available STBs incorporate support for CSS technology. Existing STBs enable the functionality via ﬁrmware upgrades transmitted by the operator on a network channel.

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

Figure 2. European DBS single-family home low-noise block (LNB) conﬁguration: 4-input, 6-output, + 2 legacy ports. ��

��

��

��

��

��

RF5210 Chip 1

��

��

��

��

��

��

��

��

��

��

RF5210 Chip 2

��

��

��

��

��

��

��

��

��

��

��

Figure 3. European DBS channel stacking reference design: 4-input, 6-output, + 2 legacy block diagram.

Key specs in satellite LNB

Delivering high-quality video and audio

42

703RFDF4.indd 42

Figure 4. CSS 6-output channel stacking, modulated output signal.

www.rfdesign.com

March 2007

3/16/2007 2:59:10 PM

RF Design

703RFDF4.indd 43

www.rfdesign.com

43

3/16/2007 2:59:10 PM

��

��

��

��

��

�

� �

��

��

��

��

��

��

��

��

��

��

��

��

�

��

� �

��

��

��

��

��

��

��

��

Figure 5.

entertainment requires high signal quality and performance levels in the satellite LNB. RF Magic architected the CSS chip to be placed into the IF section of the LNB, to perform complex signal processing across >1 GHz of bandwidth, and to achieve limited degradation to overall LNB performance. Low noise ﬁgure: The chip was designed to enable CSS-LNBs to have equivalent noise ﬁgures to traditional LNBs. Gain: The chip enables CSS-LNBs to maintain output power levels consistent with traditional LNBs. Linearity: The chip was designed to enable CSS-LNBs with virtually no degradation to

44

703RFDF4.indd 44

linearity performance. Phase noise: The chip is designed to support DVB-S2 perfomance and has excellent phase noise performance that does not degrade the performance of the incoming signals. LO crosstalk: The chip implements proprietary design techniques to minimize LO crosstalk. Channel to channel isolation:The chip was architected to provide high isolation to ensure virtually no signal performance degradation.

Sample installations

To see the advantages of CSS, it is useful to review some examples.

www.rfdesign.com

Figure 5 shows examples of a single-family home (SFH) with one dual-tuner/PVR STB and a single-tuner STB that is upgraded to a dual-tuner/PVR STB with traditional technology and with CSS technology.

Multiple dwelling

A small multiple-dwelling unit (MDU) can be treated like the previous SFH example. For a larger MDU, a trunked system is commonly used (Figure 6). Simplifying the installation of satellite TV systems enables new revenue opportunities for operators, installers and retailers. CSS technology improves operators’

March 2007

3/16/2007 2:59:12 PM

RF Design

703RFDF4.indd 45

www.rfdesign.com

45

3/16/2007 2:59:12 PM

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

Figure 6.

drive for increased average revenue per user from content sales by simplifying the connection of additional viewing locations. Reducing install time will result in greater efﬁciency, more installs per day and customer satisfaction. CSS technology drives reductions in costs, which lowers consumer acquisition and upgrade costs, and results in increased proﬁtability:  Lower cost of STB upgrades and add-ons. Upgrading a single-tuner STB to a dual-tuner PVR or adding a new STB requires installing additional cables. This can cost on the order of 100 euros. In a CSS system, the existing cable run can be used, and the installation cost for this upgrade is zero.  Lower cost of initial installation. Cost savings can be substantial for installations with several STBs and tuners, which would traditionally require several cable runs from the ODU.  Lower costs for MDUs. CSS systems enable support of multiple tuners and STBs in a ﬂat by using a single cable run. Because most European MDUs have at least one cable into each ﬂat, no new cabling is required. Other beneﬁts from CSS include: Aesthetics: CSS system eliminates unsightly multiple cable drops. For MDUs, CSS can eliminate multiple satellite dishes on balconies. Self installation and upgradability: CSS

46

703RFDF4.indd 46

facilitates self installations, an important factor in free-to-air markets. Installing a traditional universal quad or Octo LNB requires running four or eight separate cables, compared to a CSS LNB where only one cable is required. Scalability: CSS systems can be cascaded to support additional inputs and outputs and stack more channels on the single cable. Simplicity, reliability: Fewer cables and connectors provide simplicity and increased reliability with CSS installations by reducing weather entry points.

tuner STBs and media server equipment, CSS technology is poised to simplify and reduce installation complexity. Reducing the need for multiple cables to a single cable drop results in greater customer acceptance, more efﬁcient installation and lower overall cost. RFD

Semiconductor processing for CSS

Peter Wong is senior applications engineer at RF Magic for the CSS product line.

Jazz Semiconductor manufactures the CSS chip in a robust, high reliability, and cost-effective BiCMOS process with 30 GHz bipolar and high density CMOS. The process includes a variety of high-performance passive elements for highly integrated analog and RF products. In this design, the silicon bipolar devices approach the performance of SiGe devices while remaining cost effective. Passive elements include MIM capacitors, thick top metal for inductors, and a high-performance varactor. The process meets the stringent performance and market requirements of satellite IF signals in CSS applications. As the European DBS market continues to grow and expand into multiple STBs, multi-

www.rfdesign.com

ABOUT THE AUTHORS Bill Windsor is director of product marketing at RF Magic for the CSS product line.

March 2007

3/16/2007 2:59:14 PM