54
BASIC LINE
Selection
Cable carriers with simple design for standard applications*
10 – 42
■ Cost-effective cable carrier ■ Simple and quick assembly ■ Almost all types available immediately ex stock all around the world ■ TÜV design approved in accordance with 2PfG 1036/10.97
Inside widths
Inside space is gentle on the cables – no interfering edges
kabelschlepp.de
6 – 169
Chain links made of plastic
Connectors with integrated strain relief
Inside heights
Types with single-part chain links
Fon: +49 2762 4003-0
Types with openable brackets
Subject to change.
Dividers and height separations for separating the cables
Small types for restricted installation conditions
Fast shortening/extending due to simple connection of the chain links
Different connection options by simply changing the connectors
* Some features can be different for certain types for design reasons. Our specialists are happy to advise you.
55
Selection BASIC LINE
MONO
MONO
Types 0130, 0180 with hinged, openable brackets
10 – 42 hi
Inside widths
kabelschlepp.de
6 – 169
KR Bi
Type
0130 0180
hi
10 15
Bi
6-40 10-40
Dynamics of unsupported arrangement Maximum travel length in m
Travel speed vmax in m/s
Travel acceleration amax in m/s2
Page
40 70
10 10
50 50
58 60 Dimensions in mm
Types 0132, 0202, 0182 with fixed brackets
hi KR
Fon: +49 2762 4003-0
Bi
Type
0132 0182 0202
hi
10 15 11
Bi
6-40 10-40 6-20
Dynamics of unsupported arrangement Maximum travel length in m
Travel speed vmax in m/s
Travel acceleration amax in m/s2
Page
40 70 70
10 10 10
50 50 50
58 60 62 Dimensions in mm
Type 0320 with fixed brackets
56
hi KR
Bi
Type
0320
hi
19
Bi
13-37
Dynamics of unsupported arrangement Maximum travel length in m
Travel speed vmax in m/s
Travel acceleration amax in m/s2
80
10
50
Page 64 Dimensions in mm
Subject to change.
Use our free project planning service.
Selection BASIC LINE
MONO Inside heights
Overview MONO
Type 0450 with hinged, openable or fixed brackets
Inside heights 10 – 42
hi
hi
KR
KR
0450.x0 0450.x1 0450.x2
hi
24 24 28
Bi
38-103 38-103 38-103
6 – 169
Dynamics of unsupported arrangement Maximum travel length in m
Travel speed vmax in m/s
Travel acceleration amax in m/s2
Page
120 120 120
10 10 10
50 50 50
66 66 66 Dimensions in mm
Type 0625 with hinged, openable or fixed brackets hi
hi
KR
KR Bi
Bi Type 0625.22,40,42
Type
Subject to change.
0625.22/.40/.42 0625.23/.43 0625.x5
hi
34 34 42
Bi
65-108 65-108 65-169
Inside widths
Type 0625.23,43 and 0625.x5
Dynamics of unsupported arrangement Maximum travel length in m
Travel speed vmax in m/s
Travel acceleration amax in m/s2
Page
130 130 130
8 8 8
40 40 40
70 70 70
Fon: +49 2762 4003-0
Type
Bi Type 0450.x1
kabelschlepp.de
Bi Type 0450.x0 and 0450.x2
57
Selection BASIC LINE
MONO
Overview MONO
Type 0132
Type 0130
Inside/Outside: Not to be opened
Outside: Hinged, openable brackets
10 12.5
10 12.5
10 Inside widths
Bi Bk
t Bi Bk
KR
KR
t
6 – 40
Dimensions and intrinsic chain weight kabelschlepp.de
Type
hi Bi Bk mm mm mm 10 6 12 10 10 16 10 15 21 10 20 26 10 30 36 10 40 46
0132.06 0132.10 0132.15 0132.20 0132.30 0132.40
Intrinsic chain weight kg/m 0.13 0.14 0.15 0.16 0.18 0.20
Type 0130.06 0130.10 0130.15 0130.20 0130.40
hi Bi Bk mm mm mm 10 6 12 10 10 16 10 15 21 10 20 26 10 40 46
Intrinsic chain weight kg/m 0.13 0.14 0.15 0.16 0.20
Bend radius and pitch Types 0132 and 0130
Fon: +49 2762 4003-0
Pitch t = 13.0 mm
Bend radii KR mm 28
20
37
Load diagram for unsupported length Lf depending on the additional load
Unsupported length Lf LS
0.3
Lf
Additional load qz in kg/m
0.2
0 0
0.1
0.2
0.3
0.4
0.5
Unsupported length Lf in m
Example of ordering Cable carrier
0130 Type
58
In the case of longer travel lengths, sag of the cable carriers is technically permissible depending on the application. In a gliding arrangement, even longer travel lengths are possible (see page 295). We are at your service to advise on these applications.
0.1
Connection
.
10 Inside width Bi in mm
-
28 Bend radius KR in mm
-
390 Chain length Lk in mm (without connection)
FA/MA Connection Fixed point/ Driver
Subject to change.
Use our free project planning service.
Selection BASIC LINE
MONO Inside height
Types 0132 and 0130
Connection dimensions Inside height
Plastic connectors with integrated strain relief
nz
8 7 20 27.5
For Type 0130.06 / 0130.10 / 0130.15 / 0130.20 /
Short connectors without strain relief are also available for restricted installation conditions. Please contact us.
8
7 11 20 27.5
0132.06 0132.10 0132.15 0132.20
nz
For Type 0132.30 0130.40 / 0132.40
Type
Bi mm
Bk mm
bA mm
nZ
0130.06 / 0132.06 0130.10 / 0132.10 0130.15 / 0132.15 0130.20 / 0132.20 0132.30 0130.40 / 0132.40
6 10 15 20 30 40
12 16 21 26 36 46
– – – – 22 32
1 1 2 2 3 4
Inside widths 6 – 40
kabelschlepp.de
l1
bA Bi Bi + 6
Bi Bi + 6
H
1.5
Lk
10
3.2
3.2
Connection variants Connection point MA (Standard)
Driver MI
FI
M – Driver F
– Fixed point
Fon: +49 2762 4003-0
The dimensions of the fixed point and driver connections are identical.
Connection type A
– Threaded joint outside (standard)
I
– Threaded joint inside
Fixed point
Subject to change.
FA (Standard)
In the standard version, the connectors are mounted with the threaded joint outwards (FA/MA). When ordering please specify the desired connection type (see ordering key on page 332). The connection type can subsequently be altered simply by varying the connectors.
59
Selection BASIC LINE
MONO
Types 0132 and 0130
Type 0182
Type 0180
Inside/Outside: Not to be opened
Outside: Hinged, openable brackets
15 18
15 18
15 Inside widths
Bi Bk
Bi Bk
t
KR
KR
t
10 – 40
Dimensions and intrinsic chain weight kabelschlepp.de
Type
hi Bi Bk mm mm mm 15 10 18 15 15 23 15 20 28 15 30 38 15 40 48
0182.10 0182.15 0182.20 0182.30 0182.40
Intrinsic chain weight kg/m 0.23 0.24 0.25 0.28 0.30
Type 0180.10 0180.15 0180.20 0180.30 0180.40
hi Bi Bk mm mm mm 15 10 18 15 15 23 15 20 28 15 30 38 15 40 48
Intrinsic chain weight kg/m 0.23 0.24 0.25 0.28 0.30
Bend radius and pitch Types 0182 and 0180
Fon: +49 2762 4003-0
Pitch t = 18.0 mm
Bend radii KR mm 37
28
50
Load diagram for unsupported length Lf depending on the additional load
Unsupported length Lf LS
0.8
Lf
Additional load qz in kg/m
0.6
0.4
0.2
0 0
0.4
0.6
0.8
Example of ordering Cable carrier
0180 Type
60
0.2
Unsupported length Lf in m
In the case of longer travel lengths, sag of the cable carriers is technically permissible depending on the application. In a gliding arrangement, even longer travel lengths are possible (see page 295). We are at your service to advise on these applications.
Connection
.
30 Inside width Bi in mm
-
37 Bend radius KR in mm
-
720 Chain length Lk in mm (without connection)
FA/MA Connection Fixed point/ Driver
Subject to change.
Use our free project planning service.
Selection BASIC LINE
MONO Inside height
Types 0182 and 0180
Connection dimensions Inside height
Plastic connectors with integrated strain relief
15
3.2
nz
8 7 25 32.5
Short connectors without strain relief are also available for restricted installation conditions. Please contact us.
bA
Bi Bi + 8
l1
8
7 11
Bi Bi + 8
Inside widths 10 – 40
nz
For Type 0180.10 / 0182.10 0180.15 / 0182.15 0180.20 / 0182.20 Type
For Type 0180.30 / 0182.30 0180.40 / 0182.40 Bi mm
Bk mm
bA mm
0180.10 / 0182.10 10 18 – 0180.15 / 0182.15 15 23 – 0180.20 / 0182.20 20 28 – 0180.30 / 0182.30 30 38 22 0180.40 / 0182.40 40 48 32 The dimensions of the fixed point and driver connections are identical.
nZ 1 2 2 3 4
Connection variants Connection point MA (Standard)
Driver
MI
FI
M – Driver F
kabelschlepp.de
25 32.5
– Fixed point
Fon: +49 2762 4003-0
Lk
H
1.5
3.2
Connection type A
– Threaded joint outside (standard)
I
– Threaded joint inside
Fixed point
Subject to change.
FA (Standard)
In the standard version, the connectors are mounted with the threaded joint outwards (FA/MA). When ordering please specify the desired connection type (see ordering key on page 332). The connection type can subsequently be altered simply by varying the connectors.
61
Selection BASIC LINE
MONO
Types 0182 and 0180
MONO
Inside/Outside: Not to be opened
Inside height 11 15
11 Bi Bk
Inside widths
KR
t
6 – 20
Dimensions and intrinsic chain weight hi Bi Bk mm mm mm 11 6 13 11 10 17 11 15 22 11 20 27
0202.06 0202.10 0202.15 0202.20
Bend radius and pitch 50
Load diagram for unsupported length Lf depending on the additional load
Unsupported length Lf
1.0
LS Lf
0.8
Additional load qz in kg/m
Fon: +49 2762 4003-0
Pitch t = 20.0 mm
Bend radii KR mm 28 38
18
0.6
0.4
0.2
0 0
0.2
0.4
0.6
0.8
1.0
Unsupported length Lf in m
In the case of longer travel lengths, sag of the cable carriers is technically permissible depending on the application. In a gliding arrangement, even longer travel lengths are possible (see page 295). We are at your service to advise on these applications.
Example of ordering Cable carrier
0202 Type
62
Intrinsic chain weight kg/m 0.14 0.15 0.16 0.17
Connection
.
10 Inside width Bi in mm
-
28 Bend radius KR in mm
-
460 Chain length Lk in mm (without connection)
FA/MA Connection Fixed point/ Driver
Subject to change.
kabelschlepp.de
Type
Use our free project planning service.
Selection BASIC LINE
Type 0202
Connection dimensions Inside height
Plastic connectors with integrated strain relief
Bi 3.2
Lk
l1
8
Bi + 7
H
1.5
11 Inside widths
nz
6 – 20
7
Type
Bi mm
Bk mm
nZ
0202.06 0202.10 0202.15 0202.20
6 10 15 20
13 17 22 27
1 1 2 2
kabelschlepp.de
25 32.5
The dimensions of the fixed point and driver connections are identical.
Connection variants Connection point
Driver
MI
FI
Fixed point
M – Driver F
– Fixed point
Connection type A
– Threaded joint outside (standard)
I
– Threaded joint inside
Fon: +49 2762 4003-0
MA (Standard)
FA (Standard)
Subject to change.
In the standard version, the connectors are mounted with the threaded joint outwards (FA/MA). When ordering please specify the desired connection type (see ordering key on page 332). The connection type can subsequently be altered simply by varying the connectors.
63
Selection BASIC LINE
MONO
Type 0202
MONO
Inside/Outside: Not to be opened
19 25
19
19 25 27
Inside height
Inside widths
Bi Bk
KR
t
13 – 37
Bi Bk
Type 0320.20 / .30
Type 0320 / .42 / .52 / .62 – with glide runners
Dimensions and intrinsic chain weight kabelschlepp.de
Type 0320.20 / .30 Type 0320.20 0320.30
Type 0320 / .42 / .52 / .62
hi Bi Bk mm mm mm 19 13 24 19 19 30
Intrinsic chain weight kg/m 0.32 0.35
Type 0320.42 0320.52 0320.62
Intrinsic chain weight kg/m 0.39 0.44 0.47
Type 0320 / .42 / .52 / .62
Bend radii KR mm 47
37
Bend radii KR mm 47 77
37
77
Pitch t = 32.0 mm
Fon: +49 2762 4003-0
hi Bi Bk mm mm mm 19 24 35 19 29 40 19 37 48
Bend radius and pitch Type 0320.20 / .30
100
Pitch t = 32.0 mm
Load diagram for unsupported length Lf depending on the additional load
Unsupported length Lf
1.5
LS Lf
Additional load qz in kg/m
1.0
0.5
0 0
0.4
0.6
0.8
1.0
1.2
Example of ordering Cable carrier
0320.42 Chain type
64
0.2
Unsupported length Lf in m
In the case of longer travel lengths, sag of the cable carriers is technically permissible depending on the application. In a gliding arrangement, even longer travel lengths are possible (see page 295). We are at your service to advise on these applications.
Connection
77 Bend radius KR in mm
-
800 Chain length Lk in mm (without connection)
FA/MA Connection Fixed point/ Driver
Subject to change.
Use our free project planning service.
Selection BASIC LINE
Type 0320
Connection dimensions Inside height
Plastic connectors with integrated strain relief 7 7
1.5 B1 Bi BAW
1.5
Bi BAW
5.5
14 9 50 62
l1
13 – 37
14 9 50 62
Type 0320.20
Inside widths
Type 0320.42 / .52 / .62
Connection dimensions at fixed point connection: BAW = Bi + 5.5 B1 = Bi – 12.5
Type
7 nZ Bi BAW
3
0320.20 0320.30 0320.42 0320.52 0320.62
Connection dimensions at driver connection: BAW = Bi + 11 B1 = Bi – 10.5
14 9 50 62
Bi mm 13 19 24 29 37
Bk mm 24 30 35 40 48
nz 1 2 2 3 4
Type 0320.30
kabelschlepp.de
Lk
19
nZ
nZ
Connection point M – Driver
MH M A (Standard)
Driver
MI MK FK FI
Fixed point
F
– Fixed point
Connection type A
– Threaded joint outside (standard)
I
– Threaded joint inside
H
– Threaded joint, rotated through 90° to the outside
K
– Threaded joint, rotated through 90° to the inside
Fon: +49 2762 4003-0
Connection variants
FA (Standard) FH
Subject to change.
In the standard version, the connectors are mounted with the threaded joint outwards (FA/MA). When ordering please specify the desired connection type (see ordering key on page 332). The connection type can subsequently be altered simply by varying the connectors.
65
Selection BASIC LINE
MONO
Type 0320
MONO
Inside/Outside: Not to be opened
Outside: Hinged, openable and detachable brackets
Inside heights 24 – 28
hi hG
hi hG
Bi Bk
t
KR
KR
t
Inside widths
Bi Bk
38 – 103
Dimensions and intrinsic chain weight
kabelschlepp.de
Inside/Outside: Not to be opened – hi = 24 mm Type 0450.20 0450.40 0450.60 0450.85
hi mm 24 24 24 24
hG mm 34 34 34 34
Bi Bk mm mm 38 54 58 74 78 94 103 119
Outside: Hinged, openable and detachable brackets – hi = 24 mm Intrinsic chain weight kg/m 0.65 0.78 0.92 1.20
Type 0450.21 0450.41 0450.61 0450.81
hi mm 24 24 24 24
hG mm 40 40 40 40
Bi Bk mm mm 38 54 58 74 78 94 103 119
Intrinsic chain weight kg/m 0.75 0.85 0.92 1.20
Inside/Outside: Not to be opened – hi = 28 mm
0450.22 0450.32 0450.42 0450.62 0450.82
hi mm 28 28 28 28 28
hG mm 40 40 40 40 40
Bi mm 38 48 58 78 103
Bk mm 54 64 74 94 119
Intrinsic chain weight kg/m 0.75 0.80 0.85 0.95 1.10
Bend radius and pitch Outside: Hinged, openable and detachable brackets – hi = 24 mm
Inside/Outside: Not to be opened – hi = 24 mm 52
94
Bend radii KR mm 125 150
200
Pitch t = 45.0 mm
66
52
94
Bend radii KR mm 125 150
200
For Type 0450.41, the KR 110 is also available. Pitch t = 45.0 mm
Inside/Outside: Not to be opened – hi = 28 mm 52
60
75
Bend radii KR mm 94 110 125
150
200
Pitch t = 45.0 mm Subject to change.
Fon: +49 2762 4003-0
Type
Use our free project planning service.
Selection BASIC LINE
Type 0450
Load diagram for unsupported length Lf depending on the additional load
Inside heights
Unsupported length Lf LS
3.0
Lf
Inside widths
1.0
0 0
0.5
1.0
1.5
Unsupported length Lf in m
In the case of longer travel lengths, sag of the cable carriers is technically permissible depending on the application. In a gliding arrangement, even longer travel lengths are possible (see page 295). We are at your service to advise on these applications.
Example of ordering Cable carrier
Divider system
0450.61 Chain type
94 Bend radius KR in mm
-
900 Chain length Lk in mm (without connection)
TS 0 Divider system
/
Connection
2 Number of dividers nT
38 – 103
kabelschlepp.de
2.0 Additional load qz in kg/m
24 – 28
FA/MA Connection Fixed point/ Driver
Fon: +49 2762 4003-0
Ordering divider systems: Please state the designation of the divider system (TS 0, TS 1 ...) and the number of dividers. Possibly attach a sketch with the dimensions.
Subject to change.
Guide channels ➤ from page 295
Strain relief devices ➤ from page 302
Cables for cable carrier systems ➤ from page 344
67
Selection BASIC LINE
MONO
Type 0450
MONO
Divider system TS 0
Inside widths 38 – 103
ST mm 2.5
Type 0450
aT min mm 13.5
ax min mm 9 hi
24 – 28
For types not to be opened – hi = 24 mm
For types not to be opened – hi = 28 mm ST mm 4.2
Type 0450
aT min mm 4.0
ax min mm 7.8
sT
KR
Inside heights
aT
kabelschlepp.de
For types with hinged, openable and detachable brackets – hi = 24 mm ST mm 2.5
Type 0450
aT min mm 4.0
ax
aT
In the standard version, the divider systems are mounted on every second chain link.
ax min mm 8.0
The dividers can be moved in the cross section.
Divider system TS 1 with continuous height subdivision made of plastic For types not to be opened – hi = 28 mm
0450
ST mm 4.2
SH mm 4
aT min mm 4.0
ax min mm 7.8 sH
Type
hi
The dividers can be moved in the cross section. KR
Fon: +49 2762 4003-0
sT
aT
ax
aT
In the standard version, the divider systems are mounted on every second chain link.
Divider system TS 2 with grid subdivision made of plastic (4 mm grid) For types not to be opened – hi = 28 mm SH mm 4
aT min mm 4.0
ax min mm 7.8 hi
The dividers are fixed by the height separations, the complete divider system is movable. KR
sT
aT
ax
aT
In the standard version, the divider systems are mounted on every second chain link.
Subject to change.
68
0450
ST mm 4.2
sH
Type
Use our free project planning service.
Selection BASIC LINE
Type 0450
Connection dimensions Inside heights
Plastic connectors with integrated strain relief
24 – 28
Driver connection
Fixed point connection
Inside widths l1
Lk
l1
38 – 103
6.1
9
40 52
40 52
Type
Bi mm
Bk mm
bA mm
nZ
0450.20/.21/.22 0450.40/.41/.42 0450.60/.61/.62 0450.81/.82/.85
38 58 78 103
54 74 94 119
24 44 64 89
3 5 7 9
Connection variants Connection point MA (Standard)
Driver MI
FI
M – Driver F
– Fixed point
kabelschlepp.de
9
Bi + 16
bA
Bi + 9
bA
4
4
6.1
Fon: +49 2762 4003-0
Lk
Connection type A
– Threaded joint outside (standard)
I
– Threaded joint inside
Fixed point
Subject to change.
FA (Standard)
In the standard version, the connectors are mounted with the threaded joint outwards (FA/MA). When ordering please specify the desired connection type (see ordering key on page 332). The connection type can subsequently be altered simply by varying the connectors.
69
Selection BASIC LINE
MONO
Type 0450
MONO
Inside/Outside: Not to be opened
Outside: Hinged, openable and detachable brackets
Inside heights 34 – 42
Glide runners
KR
Glide runners
t
t
kabelschlepp.de
65 – 169
KR
Inside widths
hi hG
hi hG
Bi Bk
Bi Bk
Dimensions and intrinsic chain weight
70
Type
hi mm 0625.22 34 0625.40 34 0625.42 34
hG mm 62 56 62
Bi mm 65 108 108
Bk mm 93 126 136
Outside: Hinged, openable and detachable brackets Intrinsic chain weight kg/m 1.55 1.40 1.70
Injection moulded glide runners not for type 0625.40
Type 0625.23 0625.43 0625.25 0625.45 0625.55 0625.65 0625.75
hi mm 34 34 42 42 42 42 42
hG mm 62 62 62 62 62 62 62
Bi mm 65 108 65 108 125 150 169
Bk mm 93 136 93 136 153 178 197
Intrinsic chain weight kg/m 1.55 1.70 1.74 2.06 2.07 2.15 2.37
Bend radius and pitch Inside/Outside: Not to be opened 75*
Bend radii KR mm 90 125 200
Outside: Hinged, openable and detachable brackets 300
90
125
Bend radii KR mm 150 200
250
* Not for type 0625.22
For type 0625.43, KR 75 mm is also available
Pitch t = 62.5 mm
Pitch t = 62.5 mm
300
Subject to change.
Fon: +49 2762 4003-0
Inside/Outside: Not to be opened
Use our free project planning service.
Selection BASIC LINE
Type 0625
Load diagram for unsupported length Lf depending on the additional load
Inside heights
Unsupported length Lf
5.0
LS Lf
34 – 42
4.0
Inside widths
1.0
0 0
0.5
1.0
1.5
2.0
2.5
Unsupported length Lf in m
In the case of longer travel lengths, sag of the cable carriers is technically permissible depending on the application. In a gliding arrangement, even longer travel lengths are possible (see page 295). We are at your service to advise on these applications.
Example of ordering Cable carrier
Divider system
0625.65 Chain type
125 Bend radius KR in mm
-
1250 Chain length Lk in mm (without connection)
TS 0 Divider system
/
Connection
2 Number of dividers nT
FA/MA Connection Fixed point/ Driver
Ordering divider systems: Please state the designation of the divider system (TS 0, TS 1 ...) and the number of dividers. Possibly attach a sketch with the dimensions.
Subject to change.
Guide channels ➤ from page 295
Strain relief devices ➤ from page 302
65 – 169
kabelschlepp.de
2.0
Fon: +49 2762 4003-0
Additional load qz in kg/m
3.0
Cables for cable carrier systems ➤ from page 344
71
Selection BASIC LINE
MONO
Type 0625
MONO Inside widths 65 – 169
hi mm
ST mm
aT min mm
ax min mm
34
3.5
6.0
12
34
3.5
10.0
12
0625.22 0625.40 0625.42 0625.23 0625.43 0625.25 0625.45 0625.55 0625.65 0625.75
sT
aT
ax
KR
34 – 42
Type
hi
Divider system TS 0 Inside heights
42
4.0
11.0
11
aT
In the standard version, the divider systems are mounted on every second chain link.
Divider system TS 1 with continuous height subdivision made of aluminium aT min mm
ax min mm
SH mm
h1 mm 2
42
4
11
11
2
15
1 sT
h1
ST mm
sH
0625.25 0625.45 0625.55 0625.65 0625.75
hi mm
hi
Type
3
KR
kabelschlepp.de
The dividers can be moved in the cross section.
aT
ax
aT
In the standard version, the divider systems are mounted on every second chain link. Height separation in Position 1 – 3 possible.
Divider system TS 2 with grid subdivision made of aluminium (1 mm grid) ax min mm
SH mm
h1 mm 2
42
6
12
20
The dividers are fixed by the height separations, the complete divider system is movable.
4
15
1 sT
h1
aT min mm
3
aT
ax
aT
In the standard version, the divider ystems are mounted on every second chain link.
Subject to change.
72
ST mm
sH
0625.25 0625.45 0625.55 0625.65 0625.75
hi mm
hi
Type
KR
Fon: +49 2762 4003-0
The dividers can be moved in the cross section.
Use our free project planning service.
Selection BASIC LINE
Type 0625
Connection dimensions Inside heights
Standard end connector made of steel Driver connection
34 – 42
LK
30 35 55 70
Bi + 15
12.5 10
kabelschlepp.de
12.5 10
Bi - 8
1.5
9
Bi + 10
1.5 Bi - 14
9
30 35 55 63
65 – 169
l1 M
25
l1F
25
LK
Inside widths
H
2
2
H
Fixed point connection
Connecting surface on the outside (not illustrated) possible on request.
Connection variants Connection point MA (Standard)
Driver
MI
M – Driver F
Fon: +49 2762 4003-0
Connectors with integrated strain relief are available. Please do get in touch with us.
– Fixed point
Connection type A
– Threaded joint outside (standard)
I
– Threaded joint inside
Fixed point
Subject to change.
FA
In the standard version, the connectors are mounted with the threaded joint outwards (FA/MA). When ordering please specify the desired connection type (see ordering key on page 332). The connection type can subsequently be altered simply by varying the connectors. 73
Selection BASIC LINE
MONO
Type 0625