WATER INDUSTRY
APPLICATIONS FOR WATER AND SEWAGE
O
U
R
P
R
O
F
E
S
S
I
O
FROM POTABLE WATER … TO SEWAGE! The instrumentation requirements of the water/waste-water industries can be fully covered by the wide selection available with NIVELCO’s range of instruments. Originally a portfolio of level and pressure instruments were offered for this industry segment. Recently water analytical instruments have been added to widen the range of instruments to offer complete instrumentation packages that encompass all the technologies of water production and purification. Most of the instruments are available in ATEX Ex-approved types conforming to the latest requirements. Small and medium sized systems are easy to set up using NIVELCO’s MultiCONT process controllers that can read the measured values and program NIVELCO transmitters remotely. Alternatively, our NIVISION software can be used to integrate NIVELCO transmitters into a process visualization system. PiloTREK
– pulse burst radar
NIVOFLOAT
– float switch
MicroTREK
– guided wave radar
NIVOCONT
– conductive switch
EasyTREK, EchoTREK – ultrasonic
NIVOPOINT
– magnetic tracking
NIVOCAP
– capacitive
NIVOMAG
– magnetic coupling
NIVOPRESS N
– submersible
NIVOSWITCH – vibrating fork
UNICONT PSW
– ultrasonic pump control
NIVOCAP CK – RF-capacitance
CONTINUOUS LEVEL MEASUREMENT
POINT LEVEL DETECTION
LIQUID ANALYTICS PRESSURE MEASUREMENT
FLOW MEASUREMENT
AnaCONT LEP/LER – pH, ORP AnaCONT LED – dissolved oxigen
Parshall – open channel ultrasonic
NIVOPRESS D – hydrostatic
AnaCONT LCK – conductivity transmitter
ISOMAG – magnetic induction
NIPRESS
– piezoresistive
FIELD INSTRUMENTS IN MEASUREMENT SYSTEMS Level and analytical transmitters can be connected to the MultiCONT process controller, or with the help of suitable interfaces or modems, NIVELCO field instruments can provide measurement results and control signals directly to the process control system. NIVISION software provides a perfect choice for process visualization, data collection, measurement-database management and process control tasks. MultiCONT
RS485
HART
RS485 RS485 USB
RS485
EchoTREK
USB
SAK-305 UNICOMM SAT-304
EasyTREK AnaCONT LEP NIVOPRESS N ISOMAG
UNICOMM SAK-305
PiloTREK
EasyTREK AnaCONT LED
Interface
EchoTREK
EasyTREK AnaCONT LCK
NIPRESS
4-20mA
HART
4-20mA
HART
RS485
EchoTREK
NIVOSWITCH
NIVOFLOAT
AnaCONT LED
NIVOPOINT
NIVOCONT K
N
NIVOPRESS D – hydrostatic/bottom pressure ■■ Hydrostatic level measurement ■■ Pressure measurement ■■ For foaming, corrosive liquids ■■ Remote programming
Open-channel flow measurement ■■ Ultrasonic level transmitter ■■ For calibrated, standard Parshall flumes ■■ Suitable for all flume types ■■ Suitable for water or sewage ■■ Certification of measurement ■■ Treated effluent sewage measurement ■■ Yield measurement of irrigation canals
AnaCONT – pH/ORP transmitters ■■ Compact analytical transmitter ■■ Checking of water quality ■■ Waste water treatment ■■ Application oriented probes ■■ Wide range of accessories
ISOMAG – flowmeter ■■ Electromagnetic principle ■■ For water and sewage measurement in pipelines ■■ Compact or separated type ■■ Can be certified ■■ For custody transfer measurements
UNICONT PSW – pump control system ■■ Fully automatic pump control ■■ For small sewage shafts, sumps ■■ Ultrasonic level measurement ■■ Maintenance-free ■■ Built-in timer, circuit breaker
NIVELCO PROCESS CONTROL CO. H - 1 0 4 3 B U D A P E S T , D U G O N I C S U . 1 1. TEL.: (36-1) 889-0100
▪
FAX: (36-1) 889-0200
E-mail:
[email protected]
▪
www.nivelco.com
Nivelco reserves the right to change technical data without notice!
lewat17a0606b
NIVOCAP CK – RF-capacitance ■■ Intelligent electronic level switch ■■ Easy calibration, selectable sensitivity ■■ Level switching in tanks or basins ■■ Foam detection ■■ For adhering sticky materials
S
Y
O
U
L
ISOMAG
NIVOPRESS N
E
V
E
AnaCONT LEP
EchoTREK
L
THERMOCONT TT
PiloTREK
EasyTREK
NIVOMAG
FILTERS NIPRESS
ISOMAG
SETTLING NIPRESS
WELLS
NIPRESS
NIVOPRESS N
SS
STORAGE TANK
EchoTREK
NIV OPR E
ISOMAG
MA G
NIVOPRESS N
D
NIPRESS
NIVOCAP CK
ISOMAG
NIVOSWITCH
WATER TOWER
AUXILIARY MATERIALS
ISOMAG
NIPRESS
ISOMAG NIPRESS
NIVOCAP
NIPRESS
NIPRESS
NIVOCAP
NIVOCAP
NIPRESS
BOOSTER PUMP NIVOPRESS N
POTABLE WATER PRODUCTION
R
ISO
I
BLADDER PRESSURE TANKS
FIELD SEWAGE PUMP
AUXILIARY MATERIAL TANKS
EasyTREK
NIVOPRESS N
EchoTREK
EchoTREK
EchoTREK NIVOSWITCH
NIVOFLOAT
PiloTREK NIVOSWITCH
CENTRAL COLLECTING SUMP MultiCONT NIVOCAP CK
CLARIFICATION TANK
MicroTREK
AnaCONT AnaCONT LCK LEP
EchoTREK
FINAL SEDIMENTATION TANK EchoTREK
EasyTREK
PARSHALL OR OPEN CHANNEL FLUME
BIOGAS STORAGE THERMOCONT TT
SS
D
DIGESTER
RE
EchoTREK
AnaCONT LEP AnaCONT LCK
OP
EchoTREK
AERATION TANK
NIV
SEWAGE TREATMENT
SCREEN
BIOGAS GENERATOR
INSTRUMENT SELECTION NIVOFLOAT – float switch ■■ For water and sewage ■■ Level switching of tanks, basins and sumps ■■ Filling / emptying control ■■ Level switching of sewage pumps ■■ Fail safe indication
EasyTREK – ultrasonic ■■ IP68 protection ■■ Continuous level measurement in basins, wells, sumps ■■ Level controlling of sewage pumps ■■ Tank fill/empty control ■■ Flow measurement ■■ Remote programming ■■ Volume calculation
NIVOCONT – conductive ■■ Electronic level switch for conductive liquids ■■ Compact and separated types ■■ Filling/emptying control ■■ Indication of water rush-in
EchoTREK – ultrasonic ■■ Continuous level measurement in basins, wells, sumps ■■ Tank fill/empty control ■■ Flow measurement ■■ Remote programming ■■ Volume calculation
PiloTREK – pulse burst radar ■■ High precision level measurement of liquids, slurries, emulsions
■■ Level measurement in high temperature and high pressure applications
NIVOPRESS N – submersible ■■ Draw-down protection of wells ■■ Level measurement in tanks, basins ■■ Control of sewage pumps ■■ Remote programming
WATER PRODUCTION PROCESS WATER PRODUCTION WELLS The water production wells are drilled into the ground layers rich in water where pumps are lowered to pump the raw water to the central water treatment facilities. Popular choice is the NIVOPRESS N submersible transmitter because it is suitable for measuring both water level and temperature in deep underground wells. The pressure of the water pumped from the wells is to be measured on the surface pipeline by NIVOPRESS NZ/ND or NIPRESS transmitters.
WATER TREATMENT Yield of the input e.g. spa water is measured with ISOMAG electromagnetic flowmeters and temperature with THERMOCONT TT instruments. The organic and inorganic materials are removed either by mechanical filters or by adding coagulant materials to the water and the contaminations are separated in settling tanks. Continuous level measurement is recommended with EchoTREK / PiloTREK, measuring pH value of the clear water is with AnaCONT water analytical units.
WATER DISTRIBUTION SYSTEM In the water production process pump controlling in small sumps can be solved by NIVOCONT K conductive switches and NIVOFLOAT float switches are ideal as back-up devices to increase the safety. To distribute the water to the customers is done by booster pumps, water towers or bladder pressure tanks. Level in the water tower can be measured with EasyTREK ultrasonic level transmitters from either the top or the bottom with NIVOPRESS D hydrostatic level transmitters.
WASTEWATER TREATMENT PROCESS SEWAGE LIFT STATIONS The sewage is collected in underground sumps or pits, also known as wetwells or lift stations, and is pumped to the sewage treatment plant. The EasyTREK SP type noncontact ultrasonic level transmitter models with IP68 ingress protection are our number one recommendation for these measurement tasks, likewise the another popular choice for deep sumps, the NIVOPRESS N submersible level transmitters equipped with sewage adaptor. For fail-safe protection the robust NIVOFLOAT NW float level switches are suitable solutions. The input sewage from the network contains a lot of organic and non-organic materials in suspended form as well as in solution. This pollution has to be removed.
WATER / SLURRY TREATMENT The purified wastewater can be streamed to any natural water after chemical inspection and yield measurement. Level controlling tasks of rotary drum screens are performed with ultrasonic level transmitters and detection of the generated foam on the top of the pools can be done with NIVOCAP CK capacitance level switches. The AnaCONT range of analytical measurement devices are ideal for the pH and DO analysis of the cleaned water. Open channel flow metering can be done using our Parshall flume and EasyTREK level transmitter. For calculation and data logging a MultiCONT controller can be used. The slurry separated in the sedimentation tank is transferred to the digester tank. The generated biogas is flammable medium this way only Ex type ultrasonic or MicroTREK guided wave radars can be used for level measurement tasks.