CNR – IROE “Nello Carrara”

CNR – ITEF

Firenze - Italy

Padova - Italy

Fondazione Giorgio Ronchi Firenze - Italy

6th International Workshop on ADVANCED INFRARED TECHNOLOGY AND APPLICATIONS

Sponsorized by

Sistemi Termografici

Termografia a Infrarossi

September 16 – 19, 2001 Certosa di Pontignano Siena, Italy

Chairman of the Workshop L. Ronchi Abbozzo

Co-Chairmen

G.M. Carlomagno, C. Corsi, E. Grinzato, I. Pippi

Scientific Committee

- D.Balageas, ONERA, Chatillon, France - G.M.Carlomagno, Napoli Univ. DETEC, Italy - C.Corsi, ALENIA-CREO, L’Aquila, Italy - T.S.Elliott, RRI, Malvern, U.K. - E.Grinzato, CNR-ITEF, Padova, Italy - X.Maldague, Laval Univ., Quebec, Canada - I.Pippi, CNR IROE, Firenze, Italy - L.Ronchi Abbozzo, Fond. Giorgio Ronchi, Firenze, Italy - A.E.Rozlosnik, S.I.Term.Infr., Buenos Aires, Argentina - H.N.Rutt, Southampton Univ., U.K. - T.Sakagami, Osaka Univ., Japan - G.L.Tissot, LETI, Grenoble, France - V.Vavilov, Tomsk Univ., Russia - H.Wiggenhauser, BAM, Berlin, Germany - H. Zogg, ETH, Zurich, Switzerland

PROGRAM

16.00 – 18.30

Sunday 16 September 2001 Registration Dinner

8.30 – 9.15

Monday 17 September 2001 Opening Session Session on Sensors and Materials - Chairman: C. Corsi

9.15 – 9.45 9.45 – 10.00 10.00 – 10.15 10.15 – 10.30

10.30 – 11.00

A. Rogalski (MUT-IAP, Poland): “Infrared detectors: an overview” (invited) M.V. Sochynskyi (CREO, Italy): “Large Cd1-xZnxTe crystals and their alternatives for infrared and nuclear detector applications” E. Pentia, L. Pintilie, I. Matei, I. Pintilie, T. Botila (NIMP, Romania): “Combined chemical-physical methods for enhancing IR photoconductive properties of PbS thin films” G. Paez, M. Strojnik (Centro Invest. Optica, Mexico): “Remote temperature sensor employing Erbium-doped silica” Coffee break Session on Sensors and Materials - Chairman: A. Rogalski

11.00 – 11.30 11.30 – 11.45 11.45 – 12.00 12.00 – 12.15 12.15 – 12.30 12.30 – 12.45

12.45 – 15.00

J.-L. Tissot (CEA/LETI, France): “Advanced IR detector technology development at LETI/LIR” (invited) M. Lal (NPL, India): “FT-IR studies of crystalline materials” W. Gawron, A. Rogalski (MUT-IAP, Poland): “HgCdTe multi-junction buried photodiodes fabricated by liquid phase epitaxy” J. Ziegler, M. Bruder, M. Finck, R. Krüger, P. Menger, Th. Simon, R. Wollrab (AIM-AEG, Germany): “Advanced sensor technologies for high performance infrared detectors” R. Danych, B. Więcek, S. Zwolenik (Tech.Univ.of Lodz, Poland): “Low–cost focal plane IR camera based on piroelectric sensor” D. Zintu, G. Tosone, A. Mercuri (CREO, Italy): “Vanadium Oxide Microbolometers by surface micromachining” Lunch

Session on Advanced Systems - Chairman: H.Zogg 15.00 – 15.30 15.30 – 15.45 15.45 – 16.00 16.00 – 16.15

C. Corsi (CREO, Italy): “Infrared and the others” (invited) W.N. Carr (New Jersey Inst. Tech., USA): “Uncooled infrared sensor array utilizing image conversion” W. Cabanski, R. Breiter, R. Koch, K-H. Mauk, W. Rode, J. Ziegler, H. Schneider, M. Walther, R. Oelmaier (AIM-AEG, Fraunhofer Inst., Atmel, Germany): “3rd Generation focal plane array IR detection modules at AIM” M. Attino, C. Giunti, G. Mondello, S. Pieraccini, N. Liberatore Officine Galileo, CREO, Italy): “Uncooled microbolometer for spaceborn radiometry: characterisation measurements” Coffee break

16.15 – 16.45

Session on Advanced Systems - Chairman: J.-L. Tissot 16.45 – 17.15 17.15 – 17.45 17.45 – 18.00 18.00 – 18.15 18.15 – 18.30 18.30 – 18.45 18.45 – 19.00

H. Zogg, K. Alchalabi, D. Zimin, K. Kellermann (Feder.Inst.Tech., Switzerland): “Monolithic 2-D lead chalcogenide infrared sensor arrays on active silicon chips and their noise mecha-nisms” (invited) P. Pellegrini (AFRL/SNHI, USA): “A tomographic approach to spectral imaging” (invited) G. Benedetti Michelangeli, R. Viola, N. Liberatore, A. Civetti, F. Pagni, C. Corsi (CREO, CISAM, Italy): “Multi-Band infrared imaging radiometer” D. O’Connell, C.E. Volin, J.P. Garcia, E.L. Dereniak, E.K. Hege, D. MCCarthy (Univ. of Arizona, USA): “Infrared snapshot imaging spectrometer” N. Liberatore, A. Pifferi, S. Perri (CREO, Italy): “Test bench for IRFPA based on CMT and microbolometer” V. K. Malyutenko (ISP, Ukraine): “IR “vision” of electron processes in semiconductor devices” V. D. Ivanov, S. B. Tihomirov (Sci. Res. Centre “Jupiter-Z”, Russia): “Software development in thermovision with PtSi Shottky barrier CCD matrix sensor” Social Dinner

Tuesday 18 September 2001 Session on Thermo-Fluid Dynamics – Chairman: X. Maldague 9.30 – 10.00 10.00 – 10.15 10.15 – 10.30

10.30 – 11.00

G. M. Carlomagno (DETEC, Univ. of Naples): “Convective heat transfer in gas turbine components” (invited) T. Astarita, G. Cardone, G. M. Carlomagno (DETEC, Univ. of Naples): “Heat transfer between an impinging jet and a rotating disk” J. Blaszczyk, J. Lubieniecka, J. Lukasiewicz (AFIT, Poland): “Influence of hot gases supersonic flow generated blast wave on thermal pattern of cooled jet engine turbine blade” Coffee break

Session on Biomedical and Environmental Applications - Chairman: G. M. Carlomagno 11.00 – 11.15 11.15 – 11.30 11.30 – 11.45 11.45 – 12.00 12.00 – 12.15 12.15 – 12.30 12.30 – 12.45 12.45 – 13.00

13.00 – 15.00

M. Dabrowski, R. Dulski, S. Zmuda, P. Zaborowski, C. Pogorzelski (Inst. Of Optoelect - MUT, Central Clin. Hosp. – MMA, Poland): ”The use of thermovision camera to represent physiological and pathological conditions of oral cavity mucous membrane” B. Więcek, R. Danych, S. Zwolenik (Tech.Univ.of Lodz, Poland): “Advanced application of thermography for biology and medicine” A. Catena (Italy): “The use of an IR camera in the evaluation of tree hazard” K. Lamorski, P. Pręgowski, W. Świderski, B. Usowicz, R.T. Walczak (Inst. of Agrophysics – PAS, MIAT, PIRS, Poland): “Thermal signatures of a mine buried in mineral and organic soils: modelling and experiments” M. Zieliński, S. Milewski (Naval Acad., Poland): “The airborne shipwrecked people search at sea with thermal imaging systems” V.P. Vavilov, V.G. Demin (Tomsk Polytech. Univ., Russia): “Infrared thermographic inspection of operating smokestacks” Barducci, D. Guzzi, P. Marcoionni, I. Pippi (CNR-IROE, Italy): “Infrared detection of active fires and burnt areas: theory and observations” G. Catena (ISS, Italy): “The use of a helicopter-flown IR camera in the management of water bacins and coastal waters” Lunch Session on Industrial Applications - Chairman: T. Sakagami

15.00 – 15.30 15.30 – 15.45 15.45 – 16.00 16.00 – 16.15

16.15 – 17.00

G. Pjatnitskaya, A. Segen, Y. Kofanov, A. Sarafanov (RIAM, Tech. Univ. , Russia): “The intellectual soft-hardware complex with thermovision for thermal diagnosing in radioelectronic equipment” (invited) G. Cuccurullo, P.G. Berardi (DIM, Univ. of Salerno, Italy): “IR temperature measurements in micro-wave heating” H. Haferkamp, P. Jäschke, J. Stein (LZH, Germany): “Decoding of invisible laser markings using infrared technology” C. Meola, G. M. Carlomagno, G. Giorleo, A. Squillace (DETEC, DIMP, Univ. of Naples): “Application of infrared thermography in the quality control of industrial materials” Coffee break Session on Non Destructive Evaluation - Chairman: G.Pjatnitskay

17.00 – 17.30 17.30 – 18.00 18.00 – 18.15 18.15 – 18.30 18.30 – 18.45 18.45 – 19.00

T. Sakagami, S. Kubo (Osaka Univ., Japan): “Applications of pulse heating thermography and lockin thermography to quantitative non-destructive evaluations” (invited) X. Maldague, F. Galmiche, A. Ziadi (Univ. Laval, Canada): “Advances in pulsed phase thermography” (invited) A. Segen (Tech. Univ. , Russia): “Utilizing wavelet analysis of thermograms for defect depth evaluation” A. Ciliberto, G. Cavaccini, O. Salvetti, M. Chimenti, L. Azzarelli, P.G. Bison, S. Marinetti, E. Grinzato (Alenia, CNR-IEI, CNR-ITEF, Italy): “Porosity and resin enrichment detection in composite aeronautical structures” T. Sakagami, S. Kubo (Osaka Univ., Japan): “Development of a new non-destructive testing technique for quantitative evaluations of delamination defects in concrete structures based on phase delay measurement using lock-in thermography” N. Ludwig, P. Teruzzi (Univ. of Milano, Italy): “On the defect sizing in video pulse ther-mography: modifications of an-analytical model including heat losses and 3D diffusion” Dinner

Wednesday 19 September 2001 Session on Buildings and Cultural Heritages - Chairman: V.Vavilov 9.15 – 9.45 9.45 – 10.00 10.00 – 10.15 10.15 – 10.30

10.30 – 11.00

H. Wiggenhauser (BAM, Germany): “Active IR Applications in Civil Engineering” (invited) Ch. Maierhofer, A. Brink, M. Röllig, H. Wiggenhauser (BAM, Germany): “Transient thermography for structural investigation of concrete and composites in the surface near region” E. Grinzato, C. Bressan, A. Gastaldello, C. Bonacina (CNR-ITEF, Univ. of Padova, Italy): “Giotto at infrared: monitoring of the Scrovegni chapel by IR thermography” G. Fabretti, N. Berlucchi, M. Fabretti (ICR, Italy): “Identification of archaeological sites by means of combined on-destructive multispectral surveys” Coffee break Session on Thermal and Mechanical Properties Measuremets - Chairman: E. Grinzato

11.00 – 11.30 11.30 – 11.45 11.45 – 12.00 12.00 – 12.15 12.15 – 12.30 12.30 – 12.45 12.45 – 15.00

P. G. Bison, C. Bressan, E. Grinzato, S. Marinetti, A. Mazzoldi (CNR-ITEF, CNR-ISDGM, Italy): “Cross comparison of thermal diffusivity measurements by thermal methods” (invited) F. Cernuschi, L. Lorenzoni, A. Figari (CESI, Italy): “The effects of sample surface treatments on laser flash thermal diffusivity measurements” S.P. Gadaj, W.K. Nowacki, E. A. Pieczyska (Inst. Fund. Tech. Res., Poland): ”Temperature changes in polyamide subjected to tensile deformation” S.P. Gadaj, W.K. Nowacki, E.A. Pieczyska (Inst. Fund. Tech. Res., Poland): “Temperature evolution in deformed shape memory alloy” N. Stalin Muller, J. Ch. Eytard (LMS Ecole Polytech., France): “One way to estimate simultaneously the evolution of the friction coefficient and the temperature during wear tests in using infrared system” Conclusions Lunch