Accessories

DORMA Access Control

DORMA

Key Switches

KS7 and KS8 Series key switches provide authorized control for a variety of applications.

KS700 Series

Recommended Applications • Access Control

KS701N

• Automatic Gate Operation • Alarm Shunt • Alarm Reset

Available Functions and Switch Types: • MO, momentary. • MA, alternate action (maintained on-off).

MA SPDT MO SPDT MO SPDT, 1–60 sec adj. timer MA DPDT MO DPDT 2 MO SPDT 1 MO SPDT and 1 MA SPDT 2 MA SPDT 1 MO SPDT and 1 MA SPDT, 1–60 sec adj. timer KS711 - 2 MO DPDT KS712 - 1 MO DPDT and 1 MA DPDT KS713 - 2 MA DPDT

KS701 KS702 KS704 KS705 KS706 KS707 KS708 KS709 KS710

-

Rated for 6 A @ 125–250 VAC KS709T

• Timed actuation (1–60 seconds). • SPDT, one form C relay (standard). • DPDT, two form C relays. • DPST, one each form A and form B relays.

Mortise Cylinder Specifications – KS700 Key Switches

Features: • Compatible with DORMA 1-1/8" standard 6-pin and 1-3/8" interchangeable core mortise cylinders (ordered separately). NOTE: 1-3/8 IC cylinder requires 1/4" blocking ring. • Tamper-resistant, recessed key cylinder (except KS700N). • Tamper-resistant spanner screws. • Heavy, all steel assembly with large actuator for positive circuit activation.

DORMA cylinders for use with all dual key switches: 90X10SC118 - 6-pin mortise 96D10BA138 - 6-pin SFIC mortise 97D10BA138 - 7-pin SFIC mortise

• Faceplates are 20 ga stainless steel (KS7) or 1/4" thick aluminum (KS8) high security. • 6 A @ 30 VDC electrical rating. • 7" long, 22 ga wire leads. • Multiple gang switches available. Finishes: Standard Finish: Stainless1: 630 (Satin). Aluminum2: 628 (Clear Anodized). 1. KS7 Series. 2. KS8 Series.

Optional Plated Finishes: Brass: 605 (Bright) or 606 (Satin). Bronze: 613 (Oxidized Satin Oil Rubbed). Chrome: 625 (Bright).

2

6311D Cam

DORMA cylinders for use with all single key switches: 90X11SC118 - 6-pin mortise 96D11BA138 - 6-pin SFIC mortise 97D11BA138 - 7-pin SFIC mortise

How to Order K700

Options 1-1/8" Key Cylinder, Installed CKD — (ordered separately)**

ET

— Electric Timer, 1–60 sec, 12/24 VDC SPDT (functions 4 & 10)

SRN — Siren, 4–28 VDC BZR — Buzzer, 12/24 VDC ATS — Anti-tamper Switch

Model Series Key Switch — Actuator

KS

8 7

— 1/4" Aluminum Faceplate — 20 ga Stainless Steel Faceplate

LT

— Tricolor LED (Red, Green, Amber)

L2

— 1 Red and 1 Green LED

L1G — 1 Green LED L1R — 1 Red LED

630

KS 7

605 — Bright Brass*

MA (on/off) SPDT —

01

— 1 Gang

MO SPDT —

02

N — Narrow

606 — Satin Brass*

1–60 sec Timer, w/2A SPDT —

04

2 Gang Tandem T — (KS7 only)

MA (on/off) DPDT —

05

Satin 613 — Oxidized Oil Rubbed Bronze* 625 — Bright Chrome*

MO DPDT —

06

2 MO SPDT —

07

1 MO and 1 MA SPDT —

08

2 MA SPDT —

09

1-60 sec Timer, w/2A SPDT and MA SPDT —

10

2 MO SPDT —

11

1 MO and 1 MA DPDT —

12

* Special order finishes, no cancellations or returns.

2 MA DPDT —

13

** For Key Switch with cylinder installed, specify CKD AND order key cylinder as separate line item.

Faceplate Width

Anodized Aluminum 628 — Clear (KS8 standard finish) Stainless 630 — Satin (KS7 standard finish)

Finish

Switch Function

3

DORMA

Exit Switches

PB Series exit switches are designed for aesthetic and technical compatibility with other widely used access control components.

Model 2 Single-gang 2" square exit switches – standard green or optional red (R) illuminated button. Switch with wheelchair symbol is white on mandatory blue.

The PB Series exit switches may be used as on-site or remote door controls and status indicators. These switch combinations and options provide clean and efficient door controls for most applications. Available Functions and Switch Types: • MO, momentary.

Model 3

• MA, alternate action (maintained on-off). Heavy-duty 1-1/2" diameter mushroom exit switches with 1-gang or narrow (N) face width – standard green or optional red (R) button.

• Timed actuation (1–60 seconds). • SPDT, one form C relay (standard). • DPDT, two form C relays. Features: • Faceplates are 20 ga stainless steel. • Multiple stations available. Finishes: Standard Finish: Aluminum1: 628 (Clear Anodized). Stainless: 630 (Satin).

Model 4

Heavy-duty 2-5/8" diameter exit switches with 2-gang (T) face width – standard red or optional green (G) button.

1. Model 5 only.

Optional Plated Finishes: Brass: 605 (Bright) or 606 (Satin). Bronze: 613 (Oxidized Satin Oil Rubbed). Chrome: 625 (Bright).

Model 1

Model 5/6

Narrow-face (mullion-mount) exit switches – standard green or optional red (R) illuminated button. PB13M and PB23M switches are code compliant manual releasing devices. When used with the MD31D motion sensor (page 14), the components form a system for access controlled egress doors meeting the following codes: • NFPA 101 Life Safety Code 7.2.1.6.2 • California Building Code

4

Vandal-resistant switches: Model 5 – 1/4" diameter button with 1-gang or narrow (N) face width, 628 finish only.

Model 6 – piezoelectric button with 1-gang or narrow (N) face width, 630 finish only.

How to Order Exit Switches

Model Piezoelectric Vandal-Resistant —

6

(Model 5/6 Switches available with standard finishes only.)

1/4" Diameter Vandal-Resistant —

Switch Function 3J — DPST (NC/NO) 1–40 sec Integral Timer, Push to Exit 3P — SPDT 1–180 sec Pneumatic Timer, No Label

5

2

— MO SPDT, No Label

1

— MA (on/off) SPDT, No Label

4T — MO (2) DPST (NC/NO), 2-Gang, Exit 3FT — MO SPDT w/1–60 sec Integral Timer, 2-Gang, Push to Exit 2-5/8" Diameter Heavy-Duty —

4

2T — MO DPST (NC/NO), 2-Gang, Exit 2

— MO DPST (NC/NO), Exit

1T — MA (on/off) DPST (NC/NO), 2-Gang, No Label 5

— MA (on/off) DPST (NC/NO), No Label

4

— MO DPST (NC/NO), Exit

3FT — MO SPDT w/1–60 sec Integral Timer, 2-Gang, Push to Exit 1-1/2" Diameter Heavy-Duty Mushroom —

3

2O — MO SPST (NO), Exit 2C — MO SPST (NC), Exit 1KR — MA DPST (NC/NO), Latching w/Key Reset, Red Only, No Label 1O — MA SPST (NO), No Label 1C — MA SPST (NC), No Label

2" Single-Gang Square — (Option N N/A)

2

5

— MA (on/off) DPDT, No Label

4

— MO DPDT, Push to Exit

DPST 30 sec Integral Fixed Timer, Push to Exit, 3M — Code Compliant Manual Releasing Device 3AD — DPST 1–60 sec Integral Timer, Wheelchair Symbol (mandatory blue lens)

3P — SPDT 1–180 sec Pneumatic Timer, Push to Exit 3D — DPST 1–60 sec Integral Timer, Push to Exit 2A — MO SPDT, Wheelchair Symbol (mandatory blue lens)

Narrow-Face Mullion-Mount — (Option N Mandatory)

1

2

— MO SPDT, Push to Exit

5

— MA (on/off) DPDT, No Label

4

— MO DPDT, Push to Exit

DPST 30 sec Integral Fixed Timer, Push to Exit, 3M — Code Compliant Manual Releasing Device 3P — SPDT 1–180 sec Pneumatic Timer, Push to Exit

3D — DPST 1–60 sec Integral Timer, Push to Exit 2

— MO SPDT, Push to Exit

630

PB Push-Button Actuator —

PB

Series

Red Lens/Button — Green Button — Narrow Faceplate —

R G N

T L1G 1 Red LED — L1R 1 Red/1 Green LED — L2 Tricolor LED (Red, Green, Amber) — LT Double Faceplate —

1 Green LED —

Option

605 — Bright Brass* 606 — Satin Brass* Oxidized Satin 613 — Oil Rubbed Bronze* 625 — Bright Chrome*

628 — Clear Anodized Aluminum

(standard finish, Model 5 only)

630 — Satin Stainless (standard finish)

Finish *Special order finishes, no cancellations or returns.

5

DORMA

Status Indicator Lights Remote Buzzer

Remote Buzzer

Status Indicator Lights L400-L2 - Two LEDs L400-L3 - Three LEDs L400-LT1 - One tricolor LED L400-LT2 - Two tricolor LEDs

B400-RMB

Dual voltage: 12 or 24 VDC

Specify voltage: 12 or 24 VDC

Specify lens color: R-Red, G-Green, A-Amber

How to Order L400, B400, S400

Series Narrow Face Siren — Siren — Narrow Face Buzzer —

NS400 S400 NB400

Buzzer —

B400

Light Emitting Diode —

L400

Function L2 L3 LT1

— 2 LEDs — 3 LEDs — 1 Tricolor LED

LT2 — 2 Tricolor LEDs RMB — Buzzer SN — Siren

630

L400 L2 Green Lens —

A G

613

Red Lens —

R

625

Amber Lens —

Option

605

630

— Bright Brass* — Oxidized Satin Oil Rubbed Bronze* — Bright Chrome* — Satin Stainless (standard finish)

Finish

NOTE: All combinations of features and options are not available for all models. *Special order finishes, no cancellations or returns.

6

DORMA

Desktop Consoles

Desktop consoles provide an economical method of controlling one or two doors.

be used to release a single door. The maintained (On/Off) switch can be used as a bypass for keeping the door unlocked for an extended period of time. The tricolor LEDs can display green, red, and amber colors to indicate up to three lock status conditions. Features: • Choice of heavy duty momentary or maintained operating switches accommodate lock control functions. • Tricolor LED indicators provide for immediate status indication of door position or lock status when used with lock monitors such as door position (DPS) or bond sensors (BA). • Push-button switches provide an aesthetically pleasing appearance and high operational reliability. Specifications: Dimensions: 4-1/8" W × 3-1/8" H × 6-1/4" L. Contact Rating: 5 A @ 30 VDC max. Input Power: 12/24 VDC @ 20 mA required for each LED. Console Color: Beige.

DORMA desktop consoles are available in two switch configurations with tricolor LED indicators. When used with a door position or a lock status sensor, the LEDs allow monitoring of door and lock modes. The switches can provide an on/off function or momentary access control for electromagnetic locks, shear locks, bolt locks, delayed egress systems, electrical exit systems, or electric strikes.

Switch Wiring: Common: White. Normally Open (NO): Yellow. Normally Closed (NC): Orange. Indicator: Bicolor LED 12 to 24 V. Negative: Black. Red Illumination Positive: Red.

The CC-401DTM has (1) LED and (1) momentary switch to release and monitor one door opening. The CC-402DTM has (2) LEDs and (2) momentary switches to release two door openings. The CC-403DTM has (2) LEDs with (1) momentary switch and (1) maintained switch. The momentary switch can

Green Illumination Positive: Green. Amber Illumination Positive: Power red and green simultaneously.

How to Order Desktop Consoles

Model 2DTMA — 2 MA Switches, 2 LEDs

1 or 2 Door Desktop Console —

3DTM

— 1 of ea. MO/MA Switch, 2 LEDs

Series

2DTM

— 2 MO Switches, 2 LEDs

CC40

1DTM

— 1 MO Switch, 1 LED

CC40

7

Interior Programmable Digital Keypad

DORMA

The AC217 keypad for interior applications accepts up to 120 user codes, with over one million possible combinations. The easy to operate AC217 programmable digital keypad consists of a 12 digit keyboard and a microprocessor with nonvolatile memory. The microprocessor controls the advanced features of the keyboard and all programming options. Five separate outputs are controlled by 120 user codes and two additional inputs. Available in a variety of plated finishes. Commonly used in office buildings, computer rooms, parking gates, residential applications, garage doors and storage facilities. Features: • Plug-in power supply standard. • (1) main relay output. • (4) voltage outputs, including keypad active output. • 120 PIN codes from 1–6 digits. • Codes stored in EEPROM memory and cannot be lost during power failure. • Unaffected by electromagnetic interference. • Momentary or latching outputs.

Finishes:

• Yellow LED key press indicator.

Standard Finish: Stainless: 630 (Satin).

• Red/green/yellow status indicator. • Disable keypad. • Disable individual PIN codes. • Anti-tamper keypad lockout. • Request to exit input. • Panic code. • 2-3/4" W × 4-1/2" H × 1-1/8" D. • 22 ga stainless steel or plated steel faceplate. Electrical Specifications: Input Voltage: 12/24 V AC/DC. Power Consumption: 20 mA at rest, 120 mA max. Outputs: Main relay #0: SPDT 6 A @30 VDC Aux voltage #1–#4: Switches to (–) @500 mA max. Plug-in Power Supply: 12 VDC, 780 mA fused and filtered lock output, 150 mA non-fused, regulated and filtered keypad output, AC ground, UL listed, Class 2. Environmental Specifications: Operating Temperature: –28º C to 55º C (–20º F to 130º F). Humidity: 90%.

8

Optional Plated Finishes: Brass: 605 (Bright) or 606 (Satin). Bronze: 613 (Dark Oxidized Satin). Chrome: 625 (Bright). Keypad Operation: The AC217 digital keypad is simple to operate. When a valid code is entered, the self-contained electronics will direct a signal to programmed output(s). For access control applications, a request to exit can be added and programmed to activate any output(s). For alarm control applications, enter a valid user code to arm or disarm. A different code can be used to shunt or bypass an alarm zone. If enabled, the # and * trigger a panic condition which can be programmed to any output(s). Programmable Outputs: The main relay output #0 and voltage outputs #1–#3 can be programmed as momentary or latching (On/Off). When programmed as latching, a correctly entered code alternates output position. Momentary time operation is programmable for 1–255 seconds.

The user selects the output(s) to be associated with every code or REX input. Separate user codes and REX input can have their own specific output(s). Respective codes can be used to complete tasks and can function independently of each other. The main relay output #0 can control practically any kind of device, including magnetic locks, electric strikes, industrial equipment, and security systems. Outputs #0–#3 can be used to indicate duress or panic or can drive an external auxiliary relay or LED. Use key active output #4 to activate a relay for a lamp or camera. Code Types: • Panic - Triggered when the # and * are pressed simultaneously. This special code can be programmed to available output #0–#3.

Programming Options: • Add a user code. • Delete a user code. • Change the programming code. • Program “panic” to output(s). • Program “request-to-exit” to output(s). • Enable/disable key press, yellow LED indicator. • Set code length from 1 to 6 digits. • Set main relay time. • Set voltage output time. • Erase everything.

• Operating Codes - Any one of 120 operating codes can be programmed to activate any or all four available outputs. • Programming Code - User selectable six digit code. Must be entered before programming can be accomplished. Prevents tampering with codes by unauthorized personnel. • Request-to-Exit - A simple “request to exit” button can be used to allow a timed exit from a protected area without using a code.

How to Order Digital Keypads

Model Series AC

228 — Interior, 12 Button, 480 User, Power Supply Not Included 225 — Exterior, 12 Button, 480 User, Power Supply Not Included 217 — Interior, 12 Button, 120 User, Power Supply Included

AC 217 Less Power Supply (217 Only) —

630 LPS

Options

NOTE: All combinations of features and options are not available for all models. *Special order finishes, no cancellations or returns.

605

— Bright Brass* (AC217)

606

— Satin Brass* (AC217)

613

—

625

— Bright Chrome* (AC217)

630

— Satin Stainless (AC217, standard)

701

— Satin Chrome (AC228)

711

— Anodized Flat Black (AC225)

Oxidized Satin Oil Rubbed Bronze* (AC217)

Finish

9

Exterior and Interior Programmable Digital Keypads

DORMA

The AC225 exterior keypad and AC228 interior keypad, for use with gates and door applications, accept up to 480 user codes. Rugged Outdoor Design - The AC225 is intended for demanding external, commercial environments. The keypad is housed in a rugged, cast aluminum enclosure that can be mounted on a wall or pedestal. A key lock secures the housing. The die-cast buttons feature bright, durable, and easy to read yellow graphics. Pressing any key activates a courtesy light, illuminating the keys for two minutes. Versatile Interior Keypad - The AC228 is designed to control access of a single entry point for facilities with up to 480 users. Each user is assigned a Personal Identification Number (PIN). Key pad entry of a valid 1– 6 digit code activates one or both of the output relays, releasing an electric door lock.

AC225

The AC225 Exterior and AC228 Interior keypads are wired and programmed identically, thus simplifying the programming and control process by the end user. Features: • Keypad programmable. • 480 user codes. • 1– 6 digit user codes. • 4 independent outputs. • 4 independent timers. • 2 Form C relay contacts. • 2 solid state open collector outputs.

AC228

• Program entry codes to activate one or two relays. • Disable input.

• Request-to-exit/enter input.

Electrical Specifications: Voltage: 12/24 V DC or AC (AC supply must be transformer isolated).

• Keypad tamper lockout.

Current: 10 mA typical, 150 mA max.

• Timed anti-passback.

Outputs: Relay #1, SPDT, 5 A @ 24 V Relay #2, SPDT, 1 A @ 24 V Output #3 and #4, solid state open collectors, short to common, 100 mA @ 30 VDC.

• Door sense input.

• Two LED status indicators. • Tactile key feel. • Audible code entry verification. • 4" W × 5-1/2" H × 3" D (AC225). • 3-1/8" W × 5-1/8" H × 1-1/2" D (AC228).

Environmental Specifications: Operating Temperature: –30º C to 65º C (–22º F to 149º F). Humidity: 5%–95%, non-condensing.

10

Finishes:

Door Application

AC225 Enclosure Finish: Black: 711 (Flat).

Door Sense Switch

AC225 Face Plate Finish: Stainless Steel: 630 (Satin).

2 Wires for Door Sense

AC228 Face Plate Finish: Matte Silver over PVC. Keypad Operation: Pressing any key activates a courtesy light, illuminating the keys for two minutes (AC225 only). Verification of key press is provided by audible and tactile feedback. If the user presses the wrong key, the * key can be used to reset and start over. When a valid PIN is entered, the LED indicator turns from red to green and the programmed relay activates for the programmed time length. Too many incorrect PIN entries will lock out the keypad. Keypad lockout is indicated by a yellow LED. An anti-passback feature prevents use of the same code twice before a programmed time length period elapses. The EEPROM memory retains all entry codes and programming during a power failure. Programmable Outputs: The keypad features four independent outputs with four independent timers. Outputs #1 and #2 are Form “C” relay contacts. Outputs #3 and #4 are solid-state open collector outputs, short to common, which are used to signal forced entry, door ajar, lockout, shunt alarms, request to exit, and keypad active conditions.

AC225/ AC228 Keypad

2 Wires for Power

Electric Door Strike

2 Wires for Door Strike

From Power Supply

Typical Door Installation Wiring

Operating Features: • System reset.

AC225/AC228 J3

• Entry code.

N.O. 1 RELAY #1

• Adding a new PIN.

COMMON 2 N.C 3

• Erasing a single PIN.

J4

OUTPUT #3 4

+ POWER 2 – 1

• Erasing all PINs.

OUTPUT #4 5

3 DOOR SENSE

• On-time for each of the four outputs.

4 COMMON

• Beep sound during each of the four output activation times.

RELAY #2

COMMON 7 N.C. 8

Requestto-Exit

• Keypad locked out after specified number of incorrect PIN attempts, from 2 – 7.

Alarm Contact

• Anti-passback time period from 1– 4 minutes or no anti-passback.

OPEN

Electric Door Strike

• Alarm shunt output. To Alarm System

• Forced entry output.

• Keypad active output.

To Alarm System

5 REQUEST-TO-ENTER/EXIT COMMON 9 GROUND 6 EARTH GROUND

• Beep sounds on key presses.

• Door sense/inhibit input.

FAIL SAFE

N.O. 6

• Changing the master programming code.

• Door ajar output.

FAIL SECURE

Power Supply

Door Switch

NOTE: Wiring shown for fail secure lock. For fail safe lock, move wire from position 1 to position 3.

11

DORMA

Exit Touch Bars

The DORMA MSD550 mechanical switch bar is designed to release magnetic locking devices or for use as a monitor device to activate or shunt an alarm. The MSD550 will trigger when the bar is depressed less than 1/8''. It is constructed using an exclusive heavy-duty aluminum extrusion and rugged molded end caps. The mounting assembly is all metal. The rigid construction prevents malfunction due to sagging doors, warped doors, or tweaked-glass door stiles. The MSD550 is designed for high frequency usage on all types of doors. Model MSD550

Description Mechanical Switch Bar (Non-Latching) Door Opening 36'' SPDT 5 Amp @ 125 VAC

Switch

End View

The standard size above fits door openings 27'' to 36'' wide. For 42'' or 48'' wide doors, add suffix 42 or 48 to the model number. EML lock

Finishes: Standard Anodized Finishes: Aluminum: 628 (Satin). Black: 711 (Flat).

Armored Power Transfer

Optional Plated Finishes*: Brass: 605 (Bright). Stainless: 629 (Bright) or 630 (Satin). *Special order finishes, no cancellations or returns.

MSD550

12

Electronic Accessories

DORMA

Power Transfer Devices 75200 - Electrified intermediate pivot for power transfer. This eightwire design uses #28 AWG, rated for 24 V maximum. Pairs of wires connected together provide 2 amps maximum. Multiple pairs provide greater amperage ratings, i.e. two pairs in a circuit provide 4 A maximum, and four pairs provide 8 A maximum. Pivot is non-load bearing and has nonseparable pivot leaves. Specify Hand.

4-1/2" × 4-1/2" five-knuckle standard weight hinges with concealed wires, tested 800,000 cycles, UL10B listed 3-hour fire-rated doors. PTH4 - Power transfer hinge; Four (4) wire (2 pairs) rated 1 A @ 12/24 VDC. PTH4DPS - Power transfer hinge; Four (4) wire (2 pairs) rated 1 A @ 12/24 VDC; Plus door status SPDT rated 250 mA @ 30 VDC. PTH6 - Power transfer hinge; 1 pair rated 16 A inrush, 4 A continuous; 2 pair 1 A @ 12/24 VDC. PTH6DPS - Power transfer hinge; 1 pair rated 16 A inrush, 4 A continuous; 2 pair 1 A @ 12/24 VDC; Plus door status SPDT rated 250 mA @ 30 VDC. PTH10 - Power transfer hinge; Ten (10) wire (up to 5 pairs) rated 1 A @ 12/24 VDC.

PT2 - Stainless steel armored flex conduit less wires with end caps. Eighteen inches long.

How to Order Power Transfer Devices

Model Power Transfer Hinge, 10-Wire w/Door Status Power Transfer Hinge, 10-Wire Power Transfer Hinge, 1 Pair 16 A Inrush w/Door Status Power Transfer Hinge, 1 Pair 16 A Inrush Power Transfer Hinge, 4-Wire w/Door Status Power Transfer Hinge, 4-Wire Armored Flex Conduit w/Junction Box Armored Flex Conduit w/End Caps Electrified Top Pivot, 4-Wire

—

H10DPS

—

H10

—

H6DPS

—

H6

—

H4DPS

—

H4

—

3

626 — Satin Chrome3

—

2

3 625 — Bright Chrome*

—

E80624

Electrified Top Pivot, — 2-Wire

E80622

Electrified Intermediate — Pivot (Specify Hand)

75200

Power Transfer Conduit —

ES105

PT

Finish Painted

ES105 - Power transfer with steel housing and flexible tube. Secure and inconspicuous channel to bring power from frame to door. Narrow, shallow channel easily mortises into door edge. Accepts up to 5/16" dia. wire bundle. Accommodates doors that swing open 120º. Concealed when door is closed. Suitable for wood, aluminum, or steel applications.

PTH10DPS - Power transfer hinge; Ten (10) wire (up to 5 pairs) rated 1 A @ 12/24 VDC; Plus door status SPDT rated 250 mA @30 VDC.

Dark Duranodic 695 — Bronze 1 1 689 — Aluminum

630 — Satin Stainless4 1 629 — Bright Stainless

Plated

E80622/E80624 - Electrified walking beam top pivot for power transfer. Available in a two-wire and four-wire design using #18 AWG. Both designs provide a maximum of 6 A @ 24 V. Specify number of wires required.

Oxidized Satin 613 — Oil Rubbed Bronze*2 612 — Satin Bronze1

611 — Bright Bronze1 606 — Satin Brass1 2 605 — Bright Brass*

630

PT — Power Transfer, Frame to Door — Power Transfer, E80622/E80624/75200/ES105

Series PT3 - Stainless steel armored flex conduit less wires with junction box. Eighteen inches long.

* Special order finishes, no cancellation or returns. 1. E80622/E80624 only 2. E (except ES105) and PTH only 3. PTH only 4. PTH models not available

13

DORMA

Electronic Accessories

Motion Sensors MS-1 RV-1 - Unidirectional microwave motion sensor will suit virtually any interior or exterior request to exit access control application. Detects approaching traffic only. This feature greatly reduces energy loss of heating and cooling systems. PS-1 RMT - Hand held remote control required to program MS-1 RV1. Supply Voltage: 12 or 24 V AC/DC Output Relay: (1) SPDT dry contact Voltage: 60 VDC/125 VAC, 1 A max. Switching: 30 W (DC)/60 VA (AC)

RLY12 - Requires a 12 V AC or DC continuous or intermittent power. Provides N.O. and N.C. contacts for controlling auxiliary electronic hardware. Contacts are rated for 120 VAC at 12 A max.

RLY24 - Requires a 24 V AC or DC continuous or intermittent power. Provides N.O. and N.C. contacts for controlling auxiliary electronic hardware. Contacts are rated for 120 VAC at 12 A max.

Size: 4-3/4" W × 3-1/4" H × 2" D

MD-31D-OW (Off-White) MD-31D-B (Black) Passive infrared motion sensor for request to exit interior access control applications. Supply Voltage: 12 or 24 V AC/DC Output Relay: (2) SPDT dry contacts 2 A @ 30 VDC max. Mounting: ceiling or wall Size: 6-1/4" W × 1-1/2" H × 1-1/2" D

Timers/Relays 14-2 - 7-day programmable timer with built-in battery for memory storage up to 100 yr. Specify 12 V AC/DC or 24 V AC/DC One (1) SPDT dry contact, 16 A @ 30 V AC/DC

10TD - Time delay module with fieldadjustable 1–60 second delay time.

TDM - Advanced time delay module, allowing the installer to use only one time delay for any automatic door operation, electrically or magnetically locked doors, or vestibule sequencing applications. Takes one to four inputs and converts them to sequential relay outputs. As a make/break relay, eliminates mechanical binding of the locking mechanism on an automatic door. Make relay can be configured as a wet output to directly apply power to an electric locking device. To sequence vestibule sets of doors, unit provides an initial relay output for the first door, a delay between outputs 1 and 2, and another output for the second door. Also provides a delay between outputs 2 and 1, allowing you to sequence your vestibule in both directions with only one TDM. Each delay adjustable from 0.0 to 99 seconds. Power: 12 to 24 V AC/DC

Voltage: 12 or 24 V AC/DC @ 50 mA Power Consumption: 2 W max. Trigger Input: N.O. dry contact Output Contact: Form C, rated @ 3 A

14

Contact: SPDT dry contact 2 A @ 30 VDC (resistive)

Relay Contact Ratings: 3 A:120 V AC; 3 A:30 V DC

Size: 2-1/4" H × 1-1/2" W × 3/4" D

Temperature: –30° C to 70° C (–22° F to 158°F)

Desk Switches

Monitor Strikes PD15-1 - MA SPDT 6 A @ 30 V AC/DC PD15-2 - MO SPDT 10 A @ 30 V AC/DC PD15-3 - MO SPDT push-button, with On/Off toggle switch 6 A @ 30 V AC/DC

PD15-1

Technical Details: • Strong trigger mechanism, (not vandal prone sheet metal). • Fits standard ANSI 2-3/4" or 4-7/8" strike (provided by others). • Cylindrical, non-handed/mortise, reversible handing. • Standard ANSI frame preparation.

Mounted on the underside of a desk for remote door control. May be connected to REX input of an access control or trigger input of a time delay relay to allow timed access and egress.

• Vandal-resistant. • Wide gap alignment adjustment. • Horizontal alignment adjustment. • SPDT contact, 5 A @ 30 VDC (2nd contact optional).

Door Position Sensors Adjustable ball type door position switches. Compatible with swinging or sliding doors. DPS-11 - SPDT 5 A @ 30 V AC/DC, #20 AWG DPS-11-2 - (2) SPDT 5 Amp @ 30 V AC/DC, #20 AWG Finish: Aluminum: 628 (Satin).

MC-4 - Self-locking recessed mount. 3/4" dia. magnetic contact. Accommodates up to a 1/2" gap between the door and frame.

MS-12 - Cylindrical Latch Monitor for 2-3/4" strike plate, SPDT MS-12D - Cylindrical Latch Monitor for 2-3/4" strike plate, DPDT

MS-14 - Cylindrical Latch Monitor for 4-7/8" strike plate, SPDT MS-14D - Cylindrical Latch Monitor for 4-7/8" strike plate, DPDT

SPDT 250 mA @ 30 V AC/DC, #22 AWG MS-16 - Mortise Lock Latch Monitor, SPDT MS-16D - Mortise Lock Latch Monitor, DPDT MC-7 - Self-locking recessed mount with 1" dia. magnetic contact. Accommodates up to a 1/2" gap between the door and frame.

MS-18 - Mortise Lock Dead Bolt Monitor, SPDT

SPDT 250 mA @ 30 V AC/DC, #22 AWG MS-18D - Mortise Lock Dead Bolt Monitor, DPDT MC-4M - Recessed magnet mounted on Desk Switches 1-1/4" × 4-7/8" plate. Accommodates up to a 1/2" gap between the door and frame. SPDT 250 mA @ 30 V AC/DC, #22 AWG Finish: Aluminum: 628 (Satin).

MS-20 - Mortise Lock Latch and Dead Bolt Monitor, SPDT MS-20D - Mortise Lock Latch and Dead Bolt Monitor, DPDT

15

DORMA Group North America www.dorma-usa.com

DORMA Architectural Hardware DORMA Drive, Drawer AC Reamstown, PA 17567-0411 Telephone: (800) 523-8483 Facsimile: (800) 274-9724 E-mail: [email protected]

DORMA Canada 1680 Courtney Park Drive, Unit 13 Mississauga, Ontario L5T 1R4 Telephone: (800) 387-4938 Facsimile: (905) 670-5850 E-mail: [email protected]

Subject to change without notice 7.10CT 5M USA 07000299

DORMA Mexico, S. de R.L. de C.V. Astrónomos 28, Col. Escandón México, D.F. 11800 Del. Miguel Hidalgo Telephone: (52+55) 5272-6937 Facsimile: (52+55) 5272-6948 E-mail: [email protected]