A New Reference in Quality Hand Tools

Würth Canada Limited/Limitée 6330 Tomken Road, Mississauga Ontario, Canada, L5T 1N2 Tel: (905) 564-6225 - Fax: (905) 564-3671 www.wurthcanada.com

www.facebook.com/WurthCanadaLtd

HOW DOES A PRODUCT BECOME ZEBRA®?

2 THE STRIPES ARE THE POINT. The expectations for a ZEBRA® product are quite simple:

EXTREME PERFECTION! For only those products of premium quality with clever problem solving solutions, perfect ergonomics, constantly optimized performance, and top efficiency in use, functionality and service life are given the coveted stripes. We don't make compromises when it comes to the quality of our tools. Every product is subjected to endurance tests for days and sometimes weeks at our testing laboratories. These tests are always practice-oriented and are usually even much tougher than practical use itself. Of course, we test all new products prior to their market introduction, however in the course of our ongoing quality assurance we also continually test products from our existing product range.

3

3/8" Standard Hex Socket Assortment Art. No. 965.1219 Contents: 19 pieces • Supplied in a metal box and a high-quality foam insert to hold each piece in place. • Box: 315 x 115 x 40 mm. NOTE: Articles in red are Special Orders only!

Designation Ratchet Extension bar Extension bar Universal joint

Tip

Length 250 mm 125 mm 250 mm 55 mm

Art. No. 712.0380 712.128105 712.128110 712.128301

Qty. 1 1 1 1

3/8” High-Performance Ratchet • Easy handling and maximum service life. • Drive: 10 mm / 3/8”. • Standard, DIN 3122, ISO 3315. • Head: fine-toothed, 72 teeth, 5° rotating angle. • Chrome-plated with anti-slip 2-component handle resistant to general workplace oils and cleaners. • Top quality, tested by German TÜV SÜD product service. • Handy directional switch for easy switching, even with oily fingers; can be operated with one hand. • Chamfer on square enables easier pull-off as better gripping is possible. • Offset ratchet body enables more clearance for gripping with screw connections.

Inch 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 19/32 5/8 11/16 3/4 25/32 13/16 7/8

4

L1 mm 25.5 25.5 25.5 25.5 25.5 25.5 25.5 27 27 27 27 29 29 29 31

D1 mm 10 10.9 11.8 13 14.3 16 18.4 20 20.9 22 23.9 25.6 27.1 27.9 30

D2 mm 17 17 17 17 17 17 17 18 19 20 21 22.5 23.5 24.5 26

t mm 7 8 8 8 8 8 9 14 14 14 14 15 15 15 17

Art. No. 713.121201 713.121202 713.121203 713.121204 713.121205 713.121206 713.121207 713.121208 713.121209 713.121210 713.121211 713.121212 713.121213 713.121214 713.121215

Qty.

1

Designation Tip

Sizes

15 sockets

1/4" - 7/8"

Metal box Foam insert

-

315 x 115 x 40 mm 310 x 110 x 35 mm

3/8” Universal Joint • Standard: DIN 3123, ISO 3316. • Finish: chrome-plated. • Input drive: 3/8”, ball groove. • Output drive: 3/8”. • Joint: spring-loaded, stays in set position. 3/8” Extension Bars • Standard: DIN 3123, ISO 3316. • Finish: chrome-plated. • Input drive: 3/8” ball groove. • Output drive: 3/8”.

Art. No. 712.121201713.121215 955.7152 955.1219

Qty. 1 1 1

1/2" Standard Hex Socket Assortment Art. No. 965.1321

Contents: 21 pieces • Supplied in a metal box and a high-quality foam insert to hold each piece in place. • Box: 405 x 160 x 50 mm. Note: Articles in red are Special Orders only!

Designation Ratchet Extension bar Extension bar Universal joint

Tip

Length 250 mm 125 mm 250 mm 70 mm

Art. No. 712.0120 712.138105 712.138110 712.138301

Qty. 1 1 1 1

1/2” High-Performance Ratchet • Easy handling and maximum service life. • Drive: 12.5mm / 1/2”. • Standard, DIN 3122, ISO 3315. • Head: fine-toothed, 72 teeth, 5° rotating angle. • Chrome-plated with anti-slip 2-component handle resistant to general workplace oils and cleaners. • Top quality, tested by German TÜV SÜD product service. • Handy directional switch for easy switching, even with oily fingers; can be operated with one hand. • Chamfer on square enables easier pull-off as better gripping is possible. • Offset ratchet body enables more clearance for gripping with screw connections.

Inch 3/8 7/16 1/2 9/16 19/32 5/8 11/16 3/4 25/32 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4

L1 mm 38 38 38 38 38 38 38 38 38 38 41 41 41 44 44 44 44

D1 mm 16.1 17.9 19.1 20.6 21 22.9 24.6 26.5 27.9 28.5 29.9 32 34 36 37.7 40 42

D2 mm 21.9 21.9 21.9 21.9 21.9 21.9 21.9 24.7 25.5 25.5 26.5 29 30 32.2 33.5 36 38.1

t mm 12 12 12.5 13 13 13 13 19 19 19 22.5 22.5 22.5 25.5 25.5 25.5 25.5

Art. No. 712.131201 712.131202 712.131203 712.131204 712.131205 712.131206 712.131207 712.131208 712.131209 712.131210 712.131211 712.131212 712.131213 712.131214 712.131215 712.131216 712.131217

Designation Tip

Sizes

17 sockets

3/8" - 1-1/4"

Metal box Foam insert

-

405 x 160 x 50 mm 400 x 150 x 40 mm

Art. No. 712.131201713.131217 955.7153 955.1321

Qty. 1 1 1

1/2” Universal Joint • Standard: DIN 3123, ISO 3316. • Finish: chrome-plated. • Input drive: 1/2”, ball groove. • Output drive: 1/2”. • Joint: spring-loaded, stays in set position. 1/2” Extension Bars • Standard: DIN 3123, ISO 3316. • Finish: chrome-plated. • Input drive: 1/2” ball groove. • Output drive: 1/2”.

Qty.

1

5

1/2" Multi-Socket Spanner Assortment Art. No. 965.13023 - 23 pieces • Supplied in a metal box and a high-quality foam insert to hold each piece in place. • Box: 405 x 160 x 50 mm (approx.: 16 x 6 5/16 x 2”). Note: Articles in red are Special Orders only! Designation Tip Ratchet Extension Bar Extension Bar Universal Joint

Length 250 mm 125 mm 250 mm 70 mm

Art. No. 712.012 712.138105 712.138110 712.138301

1/2” Universal Joint • Standard: DIN 3123, ISO 3316. • Finish: chrome-plated. • Input drive: 1/2”, ball groove. • Output drive: 1/2”. • Joint: spring-loaded, stays in set position. 1/2” Extension Bars • Standard: DIN 3123, ISO 3316. • Finish: chrome-plated. • Input drive: 1/2” ball groove. • Output drive: 1/2”.

1

6

Length

Art. No. Qty. 712.1341036 - 44 mm 712.13432 1 405 x 160 x 50 mm 955.7153 400 x 150 x 40 mm 955.13230

• Handy directional switch for easy switching, even with oily fingers; can be operated with one hand. • Chamfer on square enables easier pull-off as better gripping is possible. • Offset ratchet body enables more clearance for gripping with screw connections.

Note: This is a metric set. Standard sizes are only Outside 6 sided

Torx

4-sided

approximate equivalencies and may not work in all applications! L1

in mm in mm

Designation Tip 19 multi-sockets, 1 ea., 10-32 mm Metal box Foam insert

1/2” High-Performance Ratchet • Easy handling and maximum service life. • Drive: 12.5mm / 1/2”. • Standard, DIN 3122, ISO 3315. • Head: fine-toothed, 72 teeth, 5° rotating angle. • Chrome-plated with anti-slip 2-component handle resistant to general workplace oils and cleaners. • Top quality, tested by German TÜV SÜD product service.

Possible uses Multi- 6/12 profile sided/12

Qty.

bolt sz head sz in TX

D1

D2

t

Qty.

in mm in mm in mm in mm in mm Art. No.

10

10

1/4"

3/8"

E12

8 mm

36

15.5

23

9

712.13410

11

11

1/4"

7/16"

E14

9 mm

36

16.7

23

10

712.13411

12

12

-

15/32" E16

10 mm 36

18

23

11

712.13412

13

13

5/16"

1/2"

-

-

36

19.2

23

11

712.13413

E18

-

36

20.5

23

13

712.13414

12 mm 36

21.7

23

13

712.13415

14

14

3/8"

9/16"

15

15

-

19/32" -

16

16

7/16"

5/8"

E20

13 mm 36

23

23

13

712.13416

17

17

-

-

-

14 mm 36

24.2

23.2

13

712.13417

18

18

-

-

E22

-

36

25.5

23.5

14

712.13418

19

19

1/2"

3/4"

E24

-

36

26.7

24.7

14

712.13419

20

20

-

25/32" -

28

25.5

14

712.13420

16 mm 36

21

21

9/16"

13/16" E26

17 mm 38

29.2

26

14

712.13421

22

22

-

7/8"

18 mm 38

30.5

26.5

16

712.13422

E28

24

24

5/8"

15/16" E30

19 mm 38

33

29

18

712.13424

26

26

-

-

21 mm 38

35.5

31.5

18

712.13426

E32

27

27

-

1-1/16" E34

22 mm 44

36.7

32.2

20

712.13427

28

28

3/4"

1-1/8"

E36

23 mm 44

38

33.5

20

712.13428

30

30

-

1-3/16" E38

24 mm 44

40.5

36

22

712.13530

32

32

-

-

26 mm 44

43

38.1

24

712.13432

E40

1

1/2" AND 1/4" MULTI-Socket Assortment Article #: 965.17056 - Qty. 1 Contents: 56 pieces • Supplied in a metal box and a high-quality foam insert to hold each piece in place. • 19 1/2" multi-sockets. • 12 1/4" multi-sockets. • 15 1/4" bits. • Box: 350 x 260 x 55 mm. 1/2" and 1/4" Universal Joints • Standards: DIN 3123, ISO 3316. • Finish: chrome-plated. • Input drives: 1/2” and 1/4", ball groove. • Output drive: 1/2” and 1/4". • Joint: spring-loaded, stays in set position. 1/2" and 1/4" Extension Bars • Standards: DIN 3123, ISO 3316. • Finish: chrome-plated. • Input drives: 1/2” and 1/4", ball groove. • Output drives: 1/2” and 1/4". 1/2" and 1/4" High-Performance Ratchets • Easy handling and maximum service life. • Drive: 1/2" (12.7 mm) and 1/4" (6.35 mm). • Standard, DIN 3122, ISO 3315. • Head: fine-toothed, 72 teeth, 5° rotating angle. • Chrome-plated with anti-slip 2-component handle resistant to general workplace oils and cleaners. Designation Tip 1/2" Ratchet 1/2" Extension bar 1/2" Extension bar 1/2" Universal joint 1/2" Multi-use sockets, sizes 10 through 20 1/2" Multi-use sockets, sizes 21, 22, 24 & 26 1/2" Multi-use sockets, sizes 27, 28, 30 & 32 1/4" Ratchet 1/4" Extension bar 1/4" Extension bar 1/4" Universal joint 1/4" Drive Screwdriver 1/4" Multi-use sockets, sizes 4 through 14 1/4" Adapter with quick change chuck

Length 250 mm 125 mm 250 mm 70 mm 36 mm 38 mm 44 mm 138 mm 100 mm 150 mm 33 mm 216 mm 22 mm 30 mm

• Top quality, tested by German TÜV SÜD product service. • Handy directional switch for easy switching, even with oily fingers; can be operated with one hand. • Chamfer on square enables easier pull-off as better gripping is possible. • Off set ratchet body enables more clearance for gripping with screw connections.

Article # 712.0120 712.138105 712.138110 712.138301 712.13410 to 712.13420 712.13421 to 712.13426 712.13427 to 712.13432 712.0140 713.118104 713.118106 713.118301 613.430310 713.11304 to 713.11314 715.1101

Qty. 1

11

4

1

Designation Hex drive Size 3 Hex drive Size 4 Hex drive Size 5 Hex drive Size 6 Phillips drive PH1 Phillips drive PH2 Phillips drive PH3 Torx drive TX10 Torx drive TX15 Torx drive TX20 Torx drive TX25 Torx drive TX27 Torx drive TX30 Torx drive TX40

1/4" Drive Screwdriver • Ergonomically shaped handle. • Grip: 2-component handle • Input drives: 1/4", ball groove. • Output drive: 1/4" Note: Articles in red are Special Orders only!

Tip

Length

25 mm

1

Metal box Foam insert

Qty.

1

614.175653

Slot drive 0.8 x 5.5 12

Article # 614.17693 614.17694 614.17695 614.17696 614.176274 614.176461 614.176648 614.3110 614.3115 614.3120 614.3125 614.3127 614.3130 614.3140

-

-

955.7154 955.1756

7

1/2" AND 1/4" MULTI-Socket Assortment Article #: 965.17056 - Qty. 1

Ratchet size

1/4"

1/2"

8

Multiprofile

Possible uses 6 Sided 12 Sided 6 sided standard Outside metric metric Bolt size Head size torx

4 mm 5 mm 5.5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 16 mm 17 mm 18 mm 19 mm 20 mm 21 mm 22 mm 24 mm 26 mm 27 mm 28 mm 30 mm 32 mm

4 mm 5 mm 5.5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 16 mm 17 mm 18 mm 19 mm 20 mm 21 mm 22 mm 24 mm 26 mm 27 mm 28 mm 30 mm 32 mm

4 mm 5 mm 5.5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 16 mm 17 mm 18 mm 19 mm 20 mm 21 mm 22 mm 24 mm 26 mm 27 mm 28 mm 30 mm 32 mm

5/32"

E5

7/32" E8 9/32" #10, #12 5/16" 11/32" 1/4" 3/8" 1/4" 7/16" 15/32" 5/16" 1/2" 3/8" 9/16" 1/4" 3/8" 1/4" 7/16" 15/32" 5/16" 1/2" 3/8" 9/16" 19/32" 7/16" 5/8" 1/2" 3/4" 25/32" 9/16" 13/16" 7/8" 5/8" 15/16" 1-1/16" 3/4" 1-1/8" 1-3/16" -

4 Sided

4 mm 4.5 mm 5 mm

E10 E12 E14 E16

8 mm 9 mm 10 mm

E18 E12 E14 E16 E18 E20 E22 E24 E26 E28 E30 E32 E34 E36 E38 E40

8 mm 9 mm 10 mm 12 mm 13 mm 14 mm 16 mm 17 mm 18 mm 19 mm 21 mm 22 mm 23 mm 24 mm 26 mm

Note: This is a metric set. Standard sizes are only approximate equivalencies and may not work in all applications. L1 in D1 in D2 in t in mm mm mm mm Article # Qty. 22 6.8 11.9 5 713.11304 22 8.1 11.9 5 713.11305 22 8.7 11.9 5.5 713.113055 22 9.3 11.9 6 713.11306 22 10.8 11.9 6 713.11307 22 11.9 11.9 7 713.11308 22 13.4 13.4 7 713.11309 22 14.5 14.5 10 713.11310 22 15.9 15.9 10 713.11311 22 16.9 16.9 10 713.11312 22 18 18 11 713.11313 22 19.6 19.6 11 713.11314 36 15.5 23 9 712.13410 36 16.7 23 10 712.13411 36 18 23 11 712.13412 36 19.2 23 11 712.13413 1 36 20.5 23 13 712.13414 36 21.7 23 13 712.13415 36 23 23 13 712.13416 36 24.2 23.2 13 712.13417 36 25.5 23.5 14 712.13418 36 26.7 24.7 14 712.13419 36 28 25.5 14 712.13420 38 29.2 26 14 712.13421 38 30.5 26.5 16 712.13422 38 33 29 18 712.13424 38 35.5 31.5 18 712.13426 44 36.7 32.2 20 712.13427 44 38 33.5 20 712.13428 44 40.5 36 22 712.13530 44 43 38.1 24 712.13432

3/8" Multi-Socket Spanner Assortment Art. No. 965.12022 - 22 pieces • Supplied in a metal box and a high-quality foam insert to hold each piece in place. • Box: 315 x 115 x 40 mm (approx.: 12-3/8 x 4-1/2 x 1-9/16"). Note: Articles in red are Special Orders only! Designation Tip Ratchet Extension Bar Extension Bar Universal Joint

Length 175 mm 125 mm 250 mm 55 mm

Art. No. 712.038 713.128105 713.128110 713.128301

3/8” Universal Joint • Standard: DIN 3123, ISO 3316. • Finish: chrome-plated. • Input drive: 3/8”, ball groove. • Output drive: 3/8”. • Joint: spring-loaded, stays in set position. 3/8” Extension Bars • Standard: DIN 3123, ISO 3316. • Finish: chrome-plated. • Input drive: 3/8” ball groove. • Output drive: 3/8”.

1

Length

Art. No. Qty. 713.12306 25.5 - 31 mm 713.12322 1 315 x 115 x 40 mm 955.7152 312 x 113 x 34 mm 955.12022

• Handy directional switch for easy switching, even with oily fingers; can be operated with one hand. • Chamfer on square enables easier pull-off as better gripping is possible. • Offset ratchet body enables more clearance for gripping with screw connections.

Note: This is a metric set. Standard sizes are only Outside 6 sided

Torx

4-sided

approximate equivalencies and may not work in all applications! L1

in mm in mm

Designation Tip 18 multi-sockets, 1 ea., 6-22 mm Metal box Foam insert

3/8” High-Performance Ratchet • Easy handling and maximum service life. • Drive: 10mm / 3/8”. • Standard, DIN 3122, ISO 3315. • Head: fine-toothed, 72 teeth, 5° rotating angle. • Chrome-plated with anti-slip 2-component handle resistant to general workplace oils and cleaners. • Top quality, tested by German TÜV SÜD product service.

Possible uses Multi- 6/12 profile sided/12

Qty.

bolt sz head sz in TX

D1

D2

t

Qty.

in mm in mm in mm in mm in mm Art. No.

6

6 mm

-

-

E8

5 mm

25.5

9.3

17

7

713.12306

6.3

6.3 mm

-

1/4”

-

-

25.5

9.9

17

7

713.123063

7

7 mm

-

9/32”

-

-

25.5

10.9

17

7

713.12307

8

8 mm

-

5/16”

E10

-

25.5

11.8

17

8

713.12308

9

9 mm

-

11/32” -

-

25.5

13.4

17

8

713.12309

10

10 mm

-

3/8”

E12

8 mm

25.5

14.6

17

8

713.12310

E14

9 mm

25.5

11

11 mm

1/4”

7/16”

12

12 mm

-

15/32” E16

10 mm 25.5

15.9

17

8

713.12311

17

17

8.5

713.12312

13

13 mm

5/16”

1/2”

-

-

25.5

18.4

17

8.5

713.12313

14

14 mm

3/8”

9/16”

E18

-

27

19.6

18

13

713.12314

15

15 mm

-

19/32” -

12 mm 27

20.9

19

13

713.12315

16

16 mm

7/16”

5/8”

E20

13 mm 27

22

20

13

713.12316

17

17 mm

-

-

-

14 mm 27

23.4

21

13

713.12317

18

18 mm

-

-

E22

-

27

24.5

21.5

13

713.12318

19

19 mm

1/2”

3/4”

E24

-

29

25.6

22.5

14

713.12319

20

20 mm

-

25/32” -

16 mm 29

26.8

23.5

14

713.12320

21

21 mm

9/16”

13/16” E26

17 mm 29

27.9

24.5

14

713.12321

22

22 mm

-

7/8”

18 mm 31

29.6

26

16

713.12322

E28

1

9

1/4" Multi-Use Socket Set Art. No. 965.11032 - 32 pieces • Supplied in a metal box with high-quality foam insert compartment with clamping effect. • 12 sockets. • 14 1/4” bits.

Designation Drive Ratchet Extension Extension Universal joint Screwdriver handle Adapter with quick change chuck 12 multi-use sockets, 4 - 14 mm Bit PH 1 Bit PH 2 Bit PH 3

Length 138 mm 100 mm 150 mm 33 mm 216 mm

Art. No. Qty. 714.11151 713.118104 713.118106 713.118301 613.430311

30 mm

715.1101

Designation

Bit hex. socket size 3 Bit hex. socket size 4 Bit hex. socket size 5 Bit hex. socket size 6 TX 10 TX 15 TX 20 TX 25 TX 30 TX 40 Metal box Foam insert

1

25 mm

1/4” Multi-Use Sockets • Chrome plated; 1/4” square drive. • Fits 5 different common head styles.

1/4” Adapter • Square socket input drive for use with ratchet to square drive. • 1/4” hex socket output drive, universal holder for 1/4” bits. Note: This is a metric set. Standard sizes are only

Possible uses Multi- 6/12

Outside 6 sided

Torx

4-sided

approximate equivalencies and may not work in all applications! L1

10

-

1/4” Universal Joint • Chrome plated; ball groove; spring loaded joint.

1/4” Drive Screwdriver • Round blade; ball groove.

D1

D2

t

Qty.

in mm in mm

bolt sz

head sz in TX

in mm in mm in mm in mm in mm Art. No.

4

-

5/32"

-

22

size 4

614.17693 614.17694 614.17695 614.17696 25 mm 614.3110 614.3115 614.3120 614.3125 614.3130 614.3140 225x125x35mm 955.7151 220x105x30mm 955.1132

1/4” Extension Bars • Chrome plated; ball groove.

1/4” High-Performance Ratchet • Chrome-plated with anti-slip 2-component handle. • Head: fine toothed; 72 teeth; 5° rotating angle.

profile sided/12

Art. No.

E5

6.8

11.9

5

713.11304

5

size 5

-

-

-

size 4

22

8.1

11.9

5

713.11305

5.5

size 5.5

-

7/32"

-

size 4.5 22

8.7

11.9

5.5

713.113055

6

size 6

-

-

E8

size 5

22

9.3

11.9

6

713.11306

7

size 7

-

9/32"

-

-

22

10.8

11.9

6

713.11307

8

size 8

#10, #12 5/16"

E10

-

22

11.9

11.9

7

713.11308

9

size 9

-

-

22

13.4

13.4

7

713.11309

11/32"

10

size 10

1/4"

3/8"

E12

size 8

22

14.5

14.5

10

713.11310

11

size 11

1/4"

7/16"

E14

size 9

22

15.9

15.9

10

713.11311

12

size 12

-

15/32" E16

size 10 22

16.9

16.9

10

713.11312

13

size 13

5/16"

1/2"

-

-

22

18

18

11

713.11313

14

size 14

3/8"

9/16"

E18

-

22

19.6

19.6

11

713.11314

Qty.

614.175653

Bit slotted 0.8 x 5.5

713.11304713.11314 714.176274 614.176461 614.176648

22 mm

Drive Length

1

1

1/4" SOCKET WRENCH SET Art. No. 965.01427

Multi-functional spherical ratchet with adjustable handle and the most commonly used socket wrenches in a compact product range. 3 in 1! Can be used like a conventional ratchet, as a screwdriver or a T-handle Designation Spherical Head Ratchet 9 Socket Wrench Inserts: One each of 6; 7; 8; 9; 10; 11; 12; 13; 14 14 Socket Wrench Insert Bits: PH 1; PH 2; PH 3 Internal hex.: 4; 5; 6 TX: 10, 15, 20, 25, 27, 30, 40 Slotted: 1.0 x 5.5 Extensions Cardan Joint Foam Insert Metal Box, size 1

Length in mm Art. No. 145 712. 01405

P. Qty.

0713 111 106 0713 111 114

22

0715 118 01 0715 118 03 25 0715 115 03–06 25 0715 113 10–40 25 0715 117 55 50; 150 0715 118 102–116 33 0713 118 301 215 x 105 x 30 0955 014 27 220 x 110 x 35 0955 715 1 25

1

Features • Drive: 6.3 – 1/4" • Standard: DIN 3122, ISO 3315 • Head: 72 teeth, angle of rotation: 5°,joint can be rotated 270° • Handle: Two-component handle, straight or adjustable 90° as T-handle • Contents: 27 pieces

Special Order

Can be used like a conventional ratchet with quick ejector or safety lock

L1 L2 L3 145 130 77 Maintenance Set

B1 B2 D1 18.5 26.5 26

Can be used like a screwdriver

D2 20

Art. No. 712.01405 0712 000 014

Can be used with T-handle and swiveling ratchet head. Any desired angle can be set. Locked in place with rotary wheel.

P. Qty. 1

Special Order

11

Go-Through Metric Socket set Art. No. 713.1300 - 14 pieces • • • •

Problem solver for narrow spaces, because of very low height. With through-hole, ideal for long bolts and threaded rods. With 2 adaptors (1/4" and 3/8") standard sockets can also be used. Supplied in a metal box and a high-quality foam insert with clamping effect.

Note: Articles in red are Special Orders only!

Designation Ratchet Extension Adapter 1/4" Adapter 3/8" 10 sockets, 10-19 mm Foam insert Metal box

Length in mm 205 76 26 30 32 220 x 105 x 30 225 x 125 x 35

Art. No. 713.13001 713.13002 713.13003 713.13004 713.13010 713.13019 955.1300 955.7151

P. Qty. 1 1 1 1 1 1 1

Ratchet Head: 72 teeth, 5° rotating angle, round, compact head, one-hand operation with reversing lever for clockwise and counter-clockwise operation. Model: chrome-plated, polished, very slim design.

Sockets Bit: Hexagon, metric, powerdriv. Model: chrome-plated, polished.

D1

D2

L1

D2 mm 19.5 19.5 19.5 19.5 19.5 19.5 19.5 19.5 19.5 19.5

Art. No. 713.13010 713.13011 713.13012 713.13013 713.13014 713.13015 713.13016 713.13017 713.13018 713.13019

Low height of the through-ratchet as compared to the standard ratchet.

12

P. Qty.

D1

D1 mm 14.7 15.4 16.6 17.7 18.9 20.1 21.2 22.4 23.6 24.8

B1 B2

t mm 7 7 7 8.5 9.5 11.5 12 12 12 12

L1

1

L1 mm 205

B1 mm 7

B2 mm 11.5

D1 mm 24.7

D2 mm 32.5

Art. No. 713.13001

P. Qty. 1

48 mm

L1 mm 32 32 32 32 32 32 32 32 32 32

33 mm

in mm 10 11 12 13 14 15 16 17 18 19

D2

t

Thanks to the through-hole, long bolts and threaded rods can be processed.

Through-ratchet with adapter ejector enables an easy removal of the socket spanner.

ratchet with switch lever

Rugged design with convenient quick release

1

function Coarse toothing with 48 teeth – 7.5° rotating angle! Easy direction change for right and left direction.

2

Secure locking with quick release to lock.

3

Features: • Fast, simple reversing of clockwise and counterclockwise rotation with lever. • Low-lying, protected reversing lever for fast left/right switching with one hand. • Offset ratchet body allows more clearance for gripping. • Ergonomical design of the handle. • Quick release for fast socket change and ball locking device.

Secure locking with quick release to unlock.

4

Low lying and protected reversing lever.

Description Ratchet with switch lever

Size 1/4" 3/8" 1/2"

Art. No. 712.01401 712.03801 712.01201

13

1/4“ Ratchet & Screwdriver Set Art. No. 008.01404

4-piece set for all your 1/4" applications. 1/4" Ratchet with Lever • Coarse toothing with 48 teeth – 7.5° rotating angle! • Fast, simple reversing of clockwise and counterclockwise rotation with lever. • Low-lying, protected reversing lever for fast left/right switching with one hand. • Offset ratchet body allows more clearance for gripping. • Ergonomical design of the handle. • Quick release for fast socket change and ball locking device. 1/4" Drive Screwdriver: • Egonomically shaped handle • Grip: 2-component handle • Input drives: 1/4", ball groove • Output drive: 1/4"

Kit includes Description Ratchet Screwdriver Extension Socket

14

Size 1/4" M13

Art. No. 712.01401 613.430310 713.118100 713.111113

1/2“ hammer ratchet Art. No. 712.01205

Saves time and money with 2 tools in one! Features: • Fast, simple switchover. • Low-lying, protected reversing lever and offset ratchet body for more clearance for gripping. • 1/2" drive (12.5 mm) • 48 teeth • Meets the DIN 3122 and IOS 3315 standards Applications: • High-bay shelfing construction, commercial vehicles and maintenance, scaffolding construction, road construction, etc. Especially for aligning work pieces.

The particular innovation of this tool is its combination of ratchet and hammer. With its high-quality workmanship, it has an extremely versatile and sturdy appeal.

15

Ratchet Adapter Assortment Article #: 965.1280 - Qty. 1 Contents: 8 pieces

Combined adapter assortment with most common socket-wrench and bit adapters. Finish: chrome plated Drive: Square (see table for list of sizes)

Socket adapters Ratchet Drive 3/4" 1/2" 1/2" 3/8" 1/4" 3/8" Bit adapters 1/4" 3/8"

16

Socket Drive 1/2" 3/4" 3/8" 1/2" 3/8" 1/4" 1/4" 5/16"

Qty.

Hard Foam insert Article #: 955.1280 Metal box 220 x 110 x 35 mm Article #: 955.7151 Note: Items in red are special orders only

1

1

1/2" Drive Torx/XZN/Allen Socket Assortment Complete 1/2" assortment with short and long Allen, inner TX and multipoint XZN sockets. Contents especially matched to automotive and cargo applications.

Art. No. 965.13310 - Qty. 1 Hard foam with clamping effect Art. No. 955.13310 Metal box 350 x 260 x 55 mm (13-3/4" x 10-1/4" x 2-3/16") Art. No. 955.7154 Contents: 31 pieces 8 TX socket wrenches, short version TX 25, 27, 30, 40, 45, 50, 55, 60 4 TX socket wrenches, long version TX 30, 40, 50, 60 4 XZN multipoint socket wrenches, short version M 5, 6, 8, 10 3 XZN multipoint socket wrenches, long version M 8, 10, 12 8 Allen socket wrenches, short version 5, 6, 7, 8, 10, 12, 14, 17 mm 4 Allen socket wrenches, long version 6, 8, 10, 12 mm

17

Double-Ring Ratchet Spanner Set Art. No. 714.23100 - 32 pieces Special tool assortment for use in tight spaces. Note: Articles in red are Special Orders only!

Designation Double-ring ratchet 1/4" and 10 mm drives Double-ring ratchet, 1/4" and 10 mm drives

Bit

Adapter 10 mm x 1/4" Foam insert 215 x 105 x 30 mm Metal box 22 x 110 x 35 mm 1/4" Drive bits: TX 15 TX 20 TX 25 TX 27 Slot 5.5 mm Slot 8.0 mm Allen head, size 4 mm Allen head, size 5 mm Allen head, size 6 mm PH 1 PH 2 PH 3

Can be used with bits and sockets. • Double-function special ratchet with 1/4” and 10 mm mount.

18

Length in mm Art. No. 200

714.23101

110

714.23102

22

715.1102

P. Qty.

955.23100 955.7151

25

614.3115 1 614.3120 614.3125 614.3127 614.175653 617.175656 614.17694 614.17695 614.17696 614.176274 614.176461 614.17648

Special low ratchet height. • In comparison to conventional 1/4” ratchets.

Designation 10 mm Drive bits: TX 30 TX 40 TX 45 XZN M 5 XZN M 6 XNZ M 8 Allen head, size 7 mm Allen head, size 8 mm 1/4" sockets, hexagon: Size 6 mm Size 7 mm Size 8 mm Size 9 mm Size 10 mm Size 11 mm Size 12 mm Size 13 mm Size 14 mm

Bit

Special offset ratchet spanner with optimum working length of 110 mm or 200 mm. • Especially suitable for tight working areas, e.g. door hinges, engine compartments and toothed belt covers.

Length in mm Art. No.

30

22

614.788830 614.788840 614.788845 614.788405 614.788406 614.788408 614.788307 614.788308

P. Qty.

1

713.111106 713.111107 713.111108 713.111109 713.111110 713.111111 713.111112 713.111113 713.111114

Fine-toothed ratchet enables screwing in and out in the smallest of spaces. • Clockwise and counter-clockwise rotation can be switched with one hand.

Flexible ratchet ring wrenches Flexible ratchet head, metric version Power take-off: ring end POWERDRIV® bihexagonal, fine pitch, 72 teeth Material: Chrome-Vanadium steel Surface finish: bright polished, chrome-plated Geometry: open end offset 15°, ring end 180° joint, sturdy heads for heavy duty use Application: loosen screws with open end, unscrew with ratchet mechanism of ring end Attention: This is a special tool that may not be subjected to loads in excess of maximum torque values. For that reason, the tool is of limited suitability for loosening of tight screws. Note: Articles in red are Special Orders only! * Available in the set, Art. No. 714.25350

mm 8 10 11 12 13 14 15 16 17 18 19

L mm 140 159 165 172 178 191 200 208 226 237 248

a1 mm 4.9 5.6 6.0 6.1 6.7 7.1 7.4 7.7 8.1 8.5 9.1

a2 mm 6.5 7.3 7.7 8.2 8.6 9.0 9.4 9.9 10.3 10.7 11.2

ød mm 15.9 19.1 20.6 21.7 23.6 25.9 27.2 28.7 30.5 31.5 39.7

b1 mm 16.7 20.9 23.0 25.1 27.7 29.3 31.3 33.4 35.5 37.6 39.7

F Max Nm ft-lb 35 25 59 43 74 54 91 67 109 80 131 96 153 112 179 132 205 151 235 173 266 196

Art. No. 714.25308* 714.25310* 714.25311 714.25312* 714.25313* 714.25314 714.25315 714.25316 714.25317* 714.25318 714.25319*

P. Qty. The 180° articulated joint of the ring wrench allows easy and flexible access to work, even in tight areas. 1

POWERDRIV®

set of flexible ratchet ring wrenches

Without POWERDRIV® = linear pressure

Set 6 pcs.

mm 8, 10, 12, 13, 17, 19

Art. No. 714.25350

P. Qty. 1

With POWERDRIV® = surface pressure

19

RATCHET COMBINATION Wrench

Innovative wrench with ratchet function on the ring and open sides. • Drive: Ring-side POWERDRIV® modified12point, open side with open ratchet segment. • Standard: max. torque as per DIN 899. • Material: Chrome-vanadium-steel. • Surface: polished, chrome-plated. • Geometry: straight on ring side, 15° angle on open side. To change the turning direction, simply turn the wrench around. Areas of use: Designed for union screw joints, e.g. brake lines, injection lines, air conditioning, hydraulics etc.

Dia. in mm 8 9 10 11 12 13 14 15 16 17 18 19

L in mm a1 mm

a2 mm

140 149 158 165 171 178 190 199 208 225 236 247

6.5 6.9 7.3 7.7 8.2 8.6 9.0 9.4 9.9 10.3 10.7 11.2

4.1 4.3 4.8 5.1 5.3 5.9 6.3 6.6 6.9 7.3 7.8 8.3

dia. d in mm 16.8 18.8 20.8 21.8 22.8 24.8 27.8 28.8 30.8 31.8 32.8 33.8

b1 mm

Art. No.

P. Qty

16.7 18.7 20.8 23.5 24.6 26.8 29.0 31.0 33.0 35.5 37.5 39.4

0714 259 08* 0714 259 09* 0714 259 10* 0714 259 11* 0714 259 12* 0714 259 13* 714.25914** 0714 259 15* 0714 259 16* 0714 259 17* 0714 259 18* 0714 259 19*

1 1 1 1 1 1 1 1 1 1 1 1

Ratchet Combination Set

*Special order only ** In stock Use:

• Open side features moving ratchet segment Enables working without stopping, as the wrench no longer needs to be taken off the nut. Ideal for all line screw joints.

20

• Fine-toothed on ring side, 72 teeth, 5° rotating angle. Very rugged and strong ratchet for high tightening torques.

Set

Dia. in mm

Art. No

6

8,10,12,13,17, 19 in plastic 714.25950 holder

P. Qty

1

Metric Double Ring Ratchet Wrench Set Innovative double-sided, double-ended ratcheting wrench. Drive: double-ring side POWERDRIV® bi-hex, fine-toothed, 72 teeth, one-hand operation via reversing lever for clockwise and counterclockwise use. Material: chrome-vanadium steel. Surface: chrome-plated, high gloss polished. Geometry: ring side straight. • • •

Set (comes in a clear plastic blister pack) Art. No. 8x10+12x13, 16x17+18x19 3 pcs. 714.25730 Bit adapter: 10 mm x 1/4", 20 mm long Set Contents: (available separately through Special Orders) L in a1 in a2 in mm mm mm in mm 8x10 +12x13 160 8 12 16x17+18x19 230 11 18 Bit adapter: 10 mm x 1/4", 20mm long

CE - VS - PHG - 250 - 06/10 - Copyright 2010 by Würth

ht Eig s size 4 2x

b1 in mm 9 11

b2 in mm 15 20

d1 in mm 21 33

d2 in mm Art. No. 26 714.257013 35 714.257019 715.1103

Size 12

Size 8

Size 13

Size 10

P. Qty. 1

Four sizes per ratchet wrench. The most common sizes are covered by only two ratchet wrenches. 1/4" bit adapter available. Simply insert in size10 mm ratchet wrench; can then be used as a bit ratchet. Narrow ratchet head. For hard-to-reach areas.

5° angle of rotation for working in the tightest of spaces. Precision-machined ring core for smooth and secure use.

P. Qty. 1 1 1

Size 19

Size 17

Size 18

Size 16

36 mm

21

Stubby Gearless Ratchets

Drive 1/4” 3/8”

L1 mm 77 106

L2 mm 93 67

B1 mm 9 11

• Short handle with reversible square drive. • Head: overrun, turning angle less than 3°. • For tight spaces, e.g. engine compartments, motorcycles, tool making, fine mechanics, kitchen construction, adjustment work. • Chrome-molybdenum steel.

B2 mm 16 23

D1 mm 21 27

D2 mm 14 16

Fmax Nm 43 162

T-Handle Ratchet Screwdriver

Art. No. 713.110111 713.120111

Qty. 1

With 10-piece bit strip + PH 2 bit. • Handle: 2 component handle. • Blade: Long bit holder blade with magnet, bright chrome-plated. • Tip: 1/4" hex (DIN 3126-D 6.3) Use of the T-handle with high loosening torque or high tightening forces. • Rugged ratchet function with 45 teeth. Max. torque up to 40 Nm (29.5 lb-ft). • 3-position adjustment wheel. Can be adjusted with one hand. Simple change of direction during work possible without using the other hand. Bits included (1 each): 1/4" 5.5 4 mm, 5 mm

in inches A1 95 mm 1/4" 3-3/4"

22

B 85 mm 3-11/32"

C 100 mm 3-15/16"

A2 10 mm 25/64"

Article #

P. Qty.

613.63040

1

PH 1, PH 2 TX 10, TX 15, TX 20, TX 25, TX 30

T-Handle Assortment 4 in 1 T-handle screwdriver + High-performance ratchet screwdriver + Reversible or adapter bits + Socket-wrench inserts Reversible bit assortment: Select an appropriate bit insert it in the handle - you're done! Art. No. 613.630400 - Qty. 1

Broad range of tools for any application.

• Ratchet function. Very rugged design, max. torque up to 40 Nm (29.5 lb-ft). Contents, 21 pieces: Length Tip Designation T-Handle Ratchet screwdriver

• Flexible bit-holder blade. Especially suitable for working in inaccessible areas.

Size

Art. No.

85 mm

613.63040

11 socket-wrench inserts, hexagon 1 each 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

22 mm

713.111105 to 713.111114

Adapter blade

150 mm

613.711

Magnetic bit holder

150 mm

613.712

P. Qty.

1

Foam insert

275 x 160 x 40

955.630400

Foam insert

275 x 160 x 40

955.12371

Designation Tip Flexible bit holder Blade PH 1 PH 2 Blade TX10 TX15 Blade TX20 TX 25 Blade TX30 TX 40 Blade Allen head 4 - 5 Blade PZ2 Slot 6 mm

• 2-component T-handle Ergonomically adapted handle. It lies comfortable in the hand and ensures fatigue-free working. • High-performance ratchet screwdriver. No more regripping required. And that enables fast, efficient operation in any assembly situation. • Large numbers of different reversible blades, adapter, bit-holders and socketwrench inserts. Contains the right tool for any application, and also includes a flexible bit holder. • High-quality reversible blades. High top strength thanks to special treatment. With Würth colour coding systems for fast locating. Black-point tip for highly precise fit. All reversible, adapter and bit-holder blades have a 1/4" / 6.3 mm hex mount.

Length Size

Art. No.

P. Qty.

613.713 613.8091 613.8092 175 mm

613.8093

1

613.8094 613.8095 613.8096 Items in red are special order only!!!

23

revolver led screwdriver

Complete screwdriver assortment with the most common bits, a broad range of adapters and socket wrench inserts.

Art. No. 613.64037 - 37 piece

ZEBRA®2-component gun grip for ergonomicallyoptimized working conditions. • Can be used as a “standard screwdriver” in the straight position or in the 60° gun position thanks to the adjustable grip. • The grip is secure and comfortable to hold in the gun position and is optimally positioned to the screw. LED technology. • The working area is always well lit. Light falls directly onto screw connection. • Especially suitable for dark areas. High-performance ratchet screwdriver. • No more regripping required. And that enables fast,efficient operation in any assembly situation. • 45 teeth, max. torque of40 Nm. Sealing cap with bit magazine for a total of six bits. • Storage space in handle, 1/4“bits with Würth colorcoding system for fast location of bits. Large number of different adapters, bit holdersand socket wrench inserts. • Contains the right short or long version for any application, also with telescopic magnet.

Contents Designation

Tip

Gun Screwdriver, LED light with short, magnetic bit holder, 70 mm

Length (size) in mm

Art. No.

P. Qty

164

0613 640 0

-

270 x 155 x 35

0955 640 37

Metal Box

-

280 x 165 x 45

0955 12 371

1/4" socket wrench inserts, hexagon Size 4 mm

0713 111 104

Size 5 mm

0713 111 105

Size 5.5 mm

0713 111 155

Size 6 mm

0713 111 106

Size 7 mm

0713 111 107

Size 8 mm

0713 111 108

22

0713 111 109

Size 10 mm

0713 111 110

Size 11 mm

0713 111 111

Size 12 mm

0713 111 112

Size 13 mm

0713 111 113

Size 14 mm

0713 111 114

1/4" bits 0614 176 274

PH 1 PH 2 PH 3

24

Tip

Length (size) in mm

Art. No.

P. Qty

1/4" Bits

Foam Insert

Size 9 mm

Designation

25

0614 176 461 0614 176 648

PZ 1

0614 176 651

PZ 2

0614 176 652

Slotted 0.8x5.5mm

0614 175 653

Slotted 1.2x8.0mm

0614 175 656

TX 10

0614 311 0

TX 15

0614 311 5 0614 312 0

TX 20 25

TX 25

1

0614 312 5

TX 27

0614 312 7

TX 30

0614 313 0

TX 40

0614 314 0

Allen Head, 3 mm

0614 176 93

Allen Head, 4 mm

0614 176 94

Allen Head, 5 mm

0614 176 95

Allen Head, 6 mm

0614 176 96

1/4" - adapter parts Extension

70 mm

0613 710

Extension

150 mm

0613 711

Magnetic bit holder

150 mm

0613 712

Flexible bit holder Telesc. magn. holding force 600 g

175 mm

0613 713

105 - 485 mm

0613 714

-

1

Zebra 3-K Screwdriver Set, 5 pieces

in mm 1.0 x 5.5 1.2 x 7.0 1.6 x 9.0

A in mm 100 125 150

B/C in mm 96/31 106/35 114/38

in mm 6/10 6/10 8/13

in inches 7/32 x 4" 9/32 x 5" 11/32 x 6"

PH1 PH2

A in mm 80 100

B/C in mm 96/31 106/35

in mm 5/8 6/10

in inches 3-1/8" 4"

The flexible 3-component handle ensures perfect ergonomics, power transmission and working comfort. Art. No. 613.9015 - Qty. 1

Art. No. Qty. 613.200055 613.20007 1 613.20009

613.2011 613.2012

1

Blade: One-piece hexagon blade, matt chrome-plated; wrench aid matt nickel-plated, hardened impact-resistant. Large impact cap. Flat Screwdriver: Tip: DIN 5264-A, ISO 2380 with "black point" tip. Phillips Screwdriver: Tip: DIN 5260-PH, ISO8764-PH with "black point" tip. Würth colour coding system on wrench aid. Articles in red are Special Orders only!

25

zebra robertson screwdriver set (square bit) Art. No. 613.43910

Features: • Square (Robertson Bit) • 2 component Handle for comfort • Colour coded tips

Set of 4 Screwdrivers Size SQ#0 SQ#1 SQ#2 SQ#3

Blade 6mm x 100mm

Precision Screwdriver set Art. No. 613.4892

7 piece set

mm 0.30 x 1.5 x 40 0.4 x 2.0 x 60 0.4 x 2.5 x 75 0.5 x 3.0 x 75 Special Order Only

26

Art. No. 0613 480 015 0613 480 020 0613 480 025 0613 480 030

PH 00 PH 0 PH 1

Art. No. 0613 481 00 0613 481 0 0613 481 1

Qty. 1 1 1

Ratchet SCrewdriver with Bit MAgazine

in inches A 80 mm 1/4" 3-9/34"

B1/B2 147 mm / 207 mm 5-25/32" / 8-9/64"

Easy change ratchet mechanism.

C 37.5 mm 1-15/32"

Grip: 2-component handle Blade: Round blade with magnet Ratchet mechanism: 28 teeth Tip: 1/4" hex (DIN 3126-D 6.3)

Art. No.

P. Qty.

613.6100

1

• Powerful ratchet screwdriver. 28 teeth, max. torque over 20 Nm (14.75 lb-ft). • Powerful, fast screwing. One-handed screwing, simple change of direction while working possible without using other hand. • Advantage of ratchet function. No more regripping required. And that enables fast, efficient operation in any assembly siruation. • 2-component handle. Extremely thin ratchet screwdriver for optimum force transfer and pleasant handling. • Bit magazine for max. 12 bits. Pull-out, rotating magazine for fast location of desired bit. (Bits are not included). • Snap lock. Audible 'click' confirms reliable locking of bit magazine.

Magnetic blade holder for 1/4" bits.

Hundreds of uses in industrial applications! Hex Nut Driver

l

stee Stainless Strong Magnetic Pickup

Powerful ratcheting screwdriver. 3 position selector ring, 28 teeth, max. torque over 20 Nm (min.225 inch lbs.)

2-component handle. Extremely thin ratchet screwdriver for optimum force. Ergonomic design for optimum comfort.

Snap lock. Audible "click" confirms reliable locking of bit magazine.

Pull-out, rotating magazine. For fast selection of desired bit. Bit magazine for max. 12 bits. (Bits are not included).

27

Screwdriver with Flexible Shaft

For hex head screws. • Shaft: round, flexible. • Drive: for hex head screws. • Head: bright nickel-plated, interior bore for protruding threads. • Standard: DIN 3125. • Application: in tight spaces, hose clamps. • Suitable for all Prefix 539 clamps.

mm 6 7

A mm 150 150

B/C mm 96/31 106/35

A inch 6" 6"

Art. No. 613.28606 613.28607

Qty. 1

* Formerly Art. No. 613.007

Bit Set with Holder Art. No. 614.206 - with 16 bits • Contains 16 popular bits with AW, slotted, Robertson, Phillips and Pozi Drive styles • 25 mm (1”) bit length • Also includes a 1/4” magnetic universal extension, 74 mm long (3”) • 5 empty slots allow you to add extra bits (Prefix 614) • Belt clip keeps set secure, and within easy reach on the job

Drive Style

28

Size AW 10 AW 20 AW 25 0.6 x 4.5 1.0 x 6.0 1.2 x 8.0

Qty. 1 1 1 1 1 1

R2

2

PH 1 PH 2 PH 3 PZ 1 PZ 2 PZ 3 1/4” E6.3, 74 mm long, stainless steel sleeve

1 2 1 1 2 1 1

Security Torx Bit Assortment Art. No. 614.250352 6 Drive Sizes Included (TX 10, 15, 20, 25, 30, 40); with inside hole. Security Torx Screws are used in applications to prevent unauthorized tampering. Applications: Air bags, ABS brakes, ignition systems, etc., protective barriers, guide rails, plexiglass panes, bus stops, park benches, school furniture, school bus repair and manufacturers, etc., distributor boxes, switch boards, charging units, air conditioning units, domestic appliances, telephones, etc.

Universal Bit Set Art. No. 614.250500 • • • •

90 pieces. 1/4” drive. Magnetic. Includes all standard drive styles and safety screws. • Includes 1/4” drive magnetic ratchet adapter. • In sturdy metal box. • Comes in foam insert to keep the bits nicely organized.

29

Angled Combi Pliers Art. No. 714.01591

A multi-funtional plier that allows many applications in countless fields! Features: • Ergonomic and relaxed position of the hand. • 2K handle for a better comfort. • Convenient use when pulling objects. • Grooves to get a grip of objects, e.g. nails • Securing workpieces • Gripping pipes • Form-fit clamping of screw-driving parts • Cutting cables and wires • Length: 200 mm Soft Wire : 5.9 mm Hard Wire : 2.5 mm Aluminum and Copper cables

:13 mm

Angled flat round pliers Art. No. 714.01592

A nose tip plier for those hard to reach areas! Features: • Ergonomic and relaxed position of the hand. • 2K handle for a better comfort. • Convenient use when pulling objects. • Cutting cables and wires • Insulating conductors • Gripping, securing and bending • Crimping wire-end sleeves (low voltage) • Length: 210 mm

Soft Wire : 5.9 mm Hard Wire : 2.5 mm Aluminum and Copper cables

30

: 13 mm

Waterpump Pliers

L inch 10 12

L mm 250 300

• Crafted from Chrome-Vanadium steel, hardened. • Plastic coated anti-slip handle. • Induction hardened teeth. • Black laquered, ground head. • Grooved, 7 adjustments on joint. • Self-clamping on pipes and nuts. • No slippage on workpiece.

D

inch 1 1-1/2

D

mm 30 40

E mm 32 40

Tower Pincers

B mm 16 19

C mm 7 10

Art. No. 714.0276 714.0277

Qty. 1

DIN 5242 • Head polished, matte black finished handles. • Twist and cut wire in one operation. • The short head and the long, slim shanks make it possible to turn the pliers easily and quickly when twisting. • Pull out nails, clips, etc. • Can be used to mount Prefix 541 clamps.

Length mm 200 220 250 280

inches 5 8 1/2 10 11

Weight in g 230 335 390 450

Art. No. 715.0204 715.0205 715.0206 715.0207

Qty.

1

31

Vice-Grip Pliers

Vice-grip pliers with universal jaws. Features: • Smooth-action release lever with spring mechanism. One-hand operation - pulling instead of pressing. • Lock nut for locking clamping width. Constant adjustment for repetitive work steps. • Ergonomic, attractive design. Convenient, effortless use. • High-quality epoxy coating. Welding spatters hardly adhere. Less rusting than with nickel. 10 times better rust resistance than a nickel coating. More friendly to the environment.

The combination of straight, semi-circular and convex jaw shape results in a broad range of clamping applications.

Total length 200 mm 235 mm 300 mm

32

Clamping jaw width 0 mm - 40 mm 0 mm - 60 mm 0 mm - 60 mm

Article # 713.0925 713.0926 713.0927

Qty. 1

Cutting knife

Art. No. 715.6621 - 18 mm Features • Handle of impact-resistant plastic and metal blade guide. High stability and precise blade guidance. • Automatic blade locking up to pressure load of 20 kg. Convenient one-hand operation. • Blade magazine for 2 spare blades. • Delivery scope incl. 3 x 18 mm break-off blades. Replacement Blade Art. No. 715.6605 - 18mm

2 extra blades included in magazine.

Safety Knife

With bi-metal blade • Automatic blade retraction via retracting spring. Minimizes risk of injury. • Blade changed in seconds without tools thanks to magnetic retainer. No need to search for suitable tools. • Ergonomic, non-slip two component handle. Fits well and securely in your hand. • Integrated blade magazine for five blades. Optimum storage of spare blades. • Includes one bi-metal trapezoidal blade.

Total Length (mm) 170

Exacta Knife

Art. No. 715.66013

P. Qty. 1

Replacement Blades Art. No. 695.106

• • • •

Handle: impact-resistant plastic. Catch: via wheel. 1 break-off blade, 18 mm, included. 8 point breakaway.

Designation Knife Replacement Blades - 18 mm

Art. No. 715.6604 715.6605

P. Qty. 5 10

33

ANGLED GEAR Art. No. 614.9000 Powerful angled screwing gear for screwing and drilling work. Suitable for use with electric drills and battery-operated driver drills. • • • •

High quality angled gear. Specially hardened steel enables maximum torque of up to 57 Nm (42 ft-lb) or maximum speed of 2000 rpm. Handle with soft grip. Secure hold and 360° steplessly adjustable handle. Optimum adjustment to respective work application. Compact design. Excellent for screwing in cramped and hard-toreach places. Magnetic 1/4" bit mount with quick-change chuck. Secure holding of screws with magnetic effect. Suitable for all standard bits and bit drills with C6.3 and E6.3 mount. • Mount: 1/4" hexagon (E6.3). • Dimensions: 165 x 32 x 50 mm (L x W x H) (6.5" x 1.25" x 2") 3

4 1

2

Fast, simple 360° adjustment of handle for high flexibility.

Mini ChUCK Art. No. 713.9204 - P. Qty. 1 • 1/4" hex shaft for use with Angled Gear, Art. No. 614.9000 • Drill size range: 0.4 mm - 6 mm (1/64" - 5/64") • Suitable for both left and right-hand rotation

34

Modular tool trolley Art. No. 715.93700

Composed of three compartments Features: • Upper hand tool box with 2 latch locks • 2 drawers with steel ball bearings • Storage truck with Würth logo on the lower compartment • All compartments are modular • Made of polypropylene and steel • Wheels made from plastic and rubber • Long telescope handle • Compartments can be locked separately from eachother Dimensions: 20.47 x 12.60 x 28.35 in 52 x 32 x 72 cm

WORKSHOP-TROLLEY S5 Art. No. 962.613500 - Qty. 1

• Full measurement including handle h 905mm x w 695mm x d 412mm • Stable welded construction • Body powder coated • Central locking • 2-wheel steering: Ø100 (1 with brake), 2 fixed wheels Ø100 • Aluminum handle • Aluminum drawers • 5 drawers • Drawer Interior Dimensions (w x d): 468 x 323 mm • Load capacity per drawer 30 kg with evenly distributed weight • Drawers on ball bearing rails, advancing 100% • Upper tray with plastic protection Dimensions Drawer Measurement wxdxh 2 small drawers 469mm x 337mm x 65mm 2 medium drawers 469mm x 337mm x 140mm 1 large drawer 469mm x 337mm x 220mm Item

35

Warranty on Würth Hand Tools Limited Warranty

Terms of and Conditions of Sale

Würth warrants any of its manufactured Products for the expected life of the Product against deficiency in material or workmanship. This warranty is subject to the disclaimers and limitations on liability described below.

Customer agrees and represents that he is buying the Product for his own use and not for resale. Customer's placement of an order for a Product constitutes Customer's unconditional acceptance of the following terms and conditions. These terms and conditions are subject to change without prior written notice at any time and in Würth's sole discretion.

Würth does NOT provide any warranty for Products subjected to "abnormal use". "Abnormal use" includes misuse, accident, modification, alteration, abuse, neglect, lack of maintenance, repair by others or use after the Product is significantly worn. Products not manufactured by Würth are not warranted by Würth.

During the applicable duration of the warranty, at its option, Würth will repair or replace its Products which fail to give satisfactory service due to defective workmanship or materials, or provide a refund by repaying or crediting Customer’s account with an amount equal to the purchase price of such Products.

There is no warranty that extends beyond those described herein. Würth makes no representations of any other kind, express or implied, regarding Products manufactured or distributed, of merchantability, fitness for a particular purpose, or any other matter. Würth is not liable for incidental or consequential costs or losses incurred by the Product purchaser or user.

Würth reserves the right to make changes in design, appearance and construction of any and all Products listed herein without incurring any obligation in making such changes in Products previously sold or transferred, or to replace any previously sold or transferred Product with the updated Product. Würth also reserves the right to discontinue the availability of any Products at any time, at Würth’s sole discretion. "Würth" means all companies forming part of the Würth Group, including Wurth Canada Limited/Limitée. "Product" means any Würth or Zebra brand hand tool purchased directly from Würth.

We have been present in Deutsche Tourenwagen Meisterschaft (DTM, German Touring Car Championships) for many years. The DTM fan community is fascinated by racing cars with more than 500 hp, and the great sport lived by the DTM drivers. In the race car pits of our partner Audi, mainly Würth tools are used. Many of the assembly elements and car care agents come from us as well. The Würth logo is proudly displayed on the C-pillar of the Audi DTM cars.