ZTrak Mowers ™

700 Series

900 Series

997 Diesel

Accept nothing less.

Meet the mowers that run circles around the competition.

2

The mowers that can accommodate your ambitions and your budget. The ZTrak™ 700 Series The Z700 is an ideal machine for entry-level professional landscape contractors looking for durability, reliability, and productivity in a basic, less-expensive, and lower-featured model than the ZTrak PRO 900 Series. Utilizing a similar steel channel frame and castings as those on the PRO Series, the Z700s features the Brake & Go™ starting system, the 7-Iron™ II mower deck, and a 10 mph commercial-duty ground drive.

Nothing less than the best zero-turn mowers in the business. The ZTrak™ PRO 900 Series

No matter what you’re looking for in a commercial zero-turn mower, you’ll find it in the Z900 lineup. We have the widest breadth of horsepower choices in the industry: from 20.5 all the way to 35. Our c-channel frames have been balanced for superior weight distribution. Integrated transmissions for more efficient use of power. And improved reliability in the deck drive system.

Mow through the toughest conditions with ease. The 997 Diesel Mower

If you’ve got to mow a lot of acres in a short amount of time, then you need the large performance of the 997 ZTrak Diesel. The 997 is equipped with a 31-hp† diesel engine. This engine provides more displacement and peak torque than most competitors. Decks include 60- or 72-in. 7-Iron™ PRO deck sidedischarge decks and a 60-in. rear-discharge deck.

3

ZTrak™ 700 Series Go into business with a solid performer. If you find yourself doing occasional commercial mowing, take a look at the zero-turn mowers that can accommodate both your ambitions and your budget: the new ZTrak™ 700 Series Mowers from John Deere. With several heavy-duty, commercial-grade features, the Z700 will give you the ability to tackle any kind of mowing job you may encounter. This mower is an ideal machine for entry-level professional landscape contractors looking for durability, reliability, and productivity in a basic mower. Utilizing a similar steel channel frame and castings as those on the PRO Series, the 700 Series feature the following:

4

•

Brake & Go starting system

•

7-Iron II high-strength, high-quality, high-throughput deck

•

Easy-grip turning height-of-cut adjustment

•

Commercial-duty ground drive delivering 10-mph (16-km/h) ground speed

•

Anti-scalp wheels on the front of the deck

•

Fully folding rollover protective structure (ROPS) for ease of storage

•

7 U.S. gal. fuel tank with gauge

•

Heavy-duty cast I-beam caster arms and cast forks

•

Pneumatic front tires for a soft ride

•

400-lb towing capacity

•

Comfortable high-back bucket seat with armrests

If you’re looking to invest in a commercial-grade mower, the best place for you to start is with a ZTrak™ Z700 model. From performance to convenience, you’ll find a mower you can do business with.

Height-of-cut adjustment dial

BRAKE & GO™ System

Set your cut height right from your seat. This simple mechanical design ensures great performance and long life. A transport lock keeps your deck in place when loading and unloading.

To start a Z700, all you have to do is set the parking brake with your foot and turn the key. That’s it. You don’t have to worry about what position the control levers are in. Just brake . . . and go.

Ease of Use

Z700 Series Features

Z700 SERIES MODELS Z710A 19.7 hp* vertical-shaft, air-cooled commercial-grade engine coupled with a proven 48-in. 7-Iron™ II deck. Z710A 19.7 hp* vertical-shaft, air-cooled commercial-grade engine coupled with a proven 54-in. 7-Iron™ II deck. Z720A 21.9 hp* vertical-shaft, air-cooled commercial-grade engine coupled with a proven 60-in. 7-Iron™ II deck.

Large 7-Gallon Fuel tank

Both the Z710A and Z720A are powered by an aircooled commercial engine. It features an overhead valve design for more torque and a true dual-stage air filtration system.

This large capacity tank is equipped with a large filler neck for easy refueling. The easy-access fuel gauge lets you know how much fuel is left. And the top draw gives an added measure of safety.

Reinforced Deck Spindle

Gear reduction drive

The one-inch cold-forged spindles are heat-treated for strength and are supported by ball bearings. The spindle housings are made of ribbed cast aluminum for both strength and heat dissipation.

Made to perform. A gear reduction drive in the wheel motor adds mechanical muscle, increasing the torque available over a purely hydraulic system. Contains a 10cc piston style pump with matching wheel motor.

ZTrak™ 700 Series

Powerful Engine

5

ZTrak™ PRO 900 Series It’s about decks stamped out of the thickest steel. It’s about increased power and better control. And it’s about running all day, with ease. Accepting nothing less than the best: it’s what guides you in your business. And it’s what we used as a benchmark for designing and building our ZTrak™ PRO 900 Series mowers.

6

Nothing less than the best zero-turn mowers in the business. No matter what you’re looking for in a commercial zero-turn mower, you’ll find it in the Z900 lineup. We have one of the widest breadth of horsepower choices in the industry: from 20.5 all the way to 35. Our c-channel frames have been balanced for superior weight distribution. Integrated transmissions for more efficient use of power. And improved reliability in the deck drive system. Accept nothing less: it is our mantra, our philosophy, and our measuring stick. And it’s what we put into each and every Z900. Once you sit on one, you’ll have it too.

MOWING PERFORMANCE • 7-Iron PRO— best deck made today • Up to 12 mph (19.3 km/h) mowing speed • More torque to the drive tires • Better hillside operation SMOOTHER HANDLING • Integrated ground drive transmission • 2-position damper mounting • Enhanced weight distribution • Conveniently placed controls

ZTrak™ PRO 900 Series

EASE OF USE • Deck step entry • Run flat caster tires • Brake and Go starting • Comfort and Convenience package

7

Leave nothing behind but the finest cut possible.

8

Power all along the line. Not only does the Z900 lineup have the widest breadth of horsepower choices, they also have larger displacement block in all of their engines.

Mowing Performance

Nothing in the industry matches our 7-Iron PRO deck: stamped out of 7-gauge steel, nor our exclusive Mulch on Demand™ deck. But mowing performance is about more than just the mowing deck. Start with speed: the Z900s have an impressive 10-12 mph (16.1-19.3 km/h). And even on our smaller engines, we have increased displacement for more power. Offset front caster wheels help improve inside corner trim performance and also help reduce between-blade striping. We re-distributed weight on our frame, moving it from the front to the rear, so you can mow with confidence on hillsides.

A solid foundation. Deck drive. Count on these decks running smooth day after day, thanks to all metal, deep and extra-wide pulleys, and optimum belt alignment, no matter what cutting height you choose.

ZTrak™ PRO 900 Series

The C-Channel frames on the Z900 are rock-solid, indestructible foundations. And a redistribution of weight, from front to rear, including a cast iron bumper, has made side-hill mowing a breeze.

9

Sports-car handling and confident traction everywhere you mow.

Whether you’re tracing a flowerbed edge, mowing a sidehill (or even doing a figure eight), you want a transmission with lightning-quick responsiveness, and traction that never quits. With the Z900, you get both. Lever position minimizes the motion required to make a turn, and an all-new integrated ground drive transmission offers the security of dual pumps plus ingenious reliability enhancements. And these unique engineering enhancements prevent “crabbing” or sliding on hills—even under tough mowing conditions. Stays cool on hills. Unique cross-porting system routes the coolest hydraulic fluid to the hydraulic pump doing the most work. But we didn’t stop there. For long life, our transmissions also feature a piston wheel motor and internal wet disk brakes, and for performance, we added gear reduction drives to enhance torque to the drive wheels. 10

An integrated ground drive system gives the Z900 line exceptional controllability, especially on side-hill mowing operations. Improved power and redistribution of weight has also improved performance.

Made to perform.

Smoother Handling

Surgically precise control. A smaller range of motion for the control levers, and tuned response time, means the system reacts smoothly to even the smallest movements by the operator.

A gear reduction drive in the wheel motor adds mechanical muscle, increasing the torque available over a purely hydraulic system.

ZTrak™ PRO 900 Series 11

Ride nothing but a machine that makes your life easier. Easy on, easy off. And everything else in between. From the very start, the Z900 is an operator’s dream, thanks to our exclusive Brake & Go™ system. To start the machine, all you need is for the foot-actuated parking brake to be engaged. Easy is everywhere: a dial-in height of cut adjustment is located right on the control arm. Easy to see fuel gauge. On-board self-diagnostics. And run-flat tires that keep you going no matter what. We also make it safe to get on the Z900, thanks to a solid steel deck entry step. And our ANSI-certified ROPS featuring 3 positions.

Caption text can be set at 8/10pt, JDSans Medium in black. Avoid hyphenation. Pay attention to rag. Captions should rest on the template gridlines and be positioned so they easily relate to photos, illustrations, charts or graphs graphics nearby.

12

Z900 mowers are equipped with an ANSIcertified, rollover protective structure (ROPS) and seat belt. This 3-position ROPS enhances operator safety as well as provide ample clearance when trailering or mowing under trees. No tools required makes repositioning easy.

Ease of Use

ROPS (rollover protective structure)

BRAKE & GO™ System To put a Z900 into motion, all you have to do is set the parking brake with your foot and turn the key. It’s that simple. No need to put the control levers in a certain position.

Ergonomic height-of-cut adjustment dial makes setting cut height simple and easy. The height-of-cut range is 1.5 to 5.0 inches at 1/4 in. increments. This simple mechanical design ensures superior performance and long life. A transport lock keeps your deck in place when loading and unloading.

High Back Seat Professionals deserve to ride in comfort. This deep-cushioned, high-back chair has standard armrests for the ultimate ride. Extra-thick foam cushioning keep the bumps and jolts to a minimum.

These ergonomically angled control levers come with thick padded grips. What’s more, the levers contain built-in electronic controls that let you raise or lower the deck as well as disengage the mower blades all with the push of a button.

ZTrak™ PRO 900 Series

Comfort and Convenience Package

13

The smartest zero-turn mower just got even smarter.

14

Electronic Fuel Injection

Introducing the

ZTrak™ PRO Z925 with Electronic Fuel Injection With the Z925 EFI, you have a commercial-grade zero-turn mower with an engine that optimizes power, performance, and efficiency in all mowing conditions. Which results in superior reliability, less downtime and up to 25% fuel savings. When you combine an engine like this with exclusive features like the Mulch On Demand deck, you’ll soon discover that the Z925 EFI ends up saving you considerable time and money. It’s a combination that can maximize the time you spend mowing, every day.

Stump the pump. An engine that knows when it needs gas . . . and when it doesn’t.

With a closed loop system, the engine actually senses unused oxygen in the exhaust multiple times per second. This means the engine can vary the amount of fuel injected appropriately and ensure no excess fuel is injected. The result is a fuel efficiency gain, with savings up to 25%.

For operators with multiple fleets, it’s easy to see how a machine like the Z925 EFI can instantly impact your bottom line.

ZTrak™ PRO 900 Series

The Z925 EFI is a closed loop fuel injection system. Which means it allows just the right amount of fuel and spark to be provided to the engine at the right time, thus improving engine performance. Within the closed loop system, sensors are used to constantly monitor and guide the performance of the engine.

15

Strength: you’re either stamped with it or you’re not. The strongest welds in the world are no match for a deck that is stamped out of thick steel. It takes 4,000,000 pounds of pressure to turn a sheet of 7-gauge steel into the backbone of the best mower deck in the industry: the 7-Iron PRO. 5.5 inches deep, the 7-Iron PRO deck houses blades that run at a speed of 18,000 feet per minute for more blades strikes per inch mowed and more acres perday. Stamped with strength and refined with a precision cut, no other deck in the industry has matched the 7-Iron deck for performance and durability. Best of all, it’s green, which means it’s backed by the best people in the business.

This is how you build one of the best deck in the commercial mowing business: by using 4,000,000 pounds of pressure. That’s the only way you can stamp a perfectly formed shell of 7-gauge steel. No other deck in the industry outperforms the 7-Iron PRO.

16

7-Iron™ Deck

Reinforced Deck A full-wrap reinforcement makes the toughest deck even tougher. Plus a heavy-duty deck step gives solid footing and easy entry and exit into and off the operator’s seat.

Gauge Wheels Center and rear anti-scalp wheels, and double captured anti-scalp wheels make sure the 7-Iron PRO deck always provides unmatched cut quality. Gauge wheels can be found on six points around the deck.

A deep-deck design of 5.5-in. delivers excellent airflow so clippings can be processed quickly and efficiently. The wider and higher discharge opening provides even clipping dispersal in all conditions.

The one-inch cold-forged spindles are heat-treated for strength and are supported by ball bearings, which helps support a blade tip speed that runs at an industry best 18,000 feet per minute. The spindle housings are made of ribbed cast aluminum for both strength and heat dissipation.

ZTrak™ PRO 900 Series

Deep Deck

Reinforced Spindle

17

Nothing beats the deck that can mulch and side-discharge on demand. Switch from side-discharging to mulching—and back again—by simply pulling a lever; there is no need to stop and install any additional baffles. When engaged, the baffles close off the cutting chambers, allowing the deck to mulch. When disengaged, the baffles fold to the front of the deck, allowing it to side discharge. With it’s outstanding side-discharge performance, windrows are history with the 7-Iron PRO Mulch on Demand™ deck— even in tall or thick grass. It’s designed to save you time, especially when you’re cutting by sidewalks, parking lots and plant beds, enabling you to engage the mulching mode when you need it. The flexibility to switch from side discharging to mulching effortlessly and safely helps you get the most from every acre and every hour.

Clipping control. The MOD deck allows you to keep sidewalks and driveways clean as possible as you mow along their edges. While you still may have to blow clippings on occasion, the MOD deck will keep your blower time at bay.

18

It starts with 7-Iron The MOD deck has, as its foundation, the legendary 7-Iron PRO deck. Which means it’s stamped from a single sheet of thick, seven gauge steel using four million pounds of pressure.

By shifting the lever to mulch position, the movable gate closes off the discharge chute and the smooth moving baffles close off cutting chambers to maximize mulching performance. The MOD deck also has, as its foundation, the legendary 7 Iron PRO deck. Which means it’s stamped from a single sheet of thick, seven gauge steel using four million pounds of pressure.

Good for the environment. In this day and age, being green is not only good for the Earth, it’s also good for business. The benefits of mulching are many: putting nitrogen back in the soil, reducing your carbon footprint by cutting down on waste, and mulching leaves.

You should also consider that it may not only be clippings coming out of your chute. Sometimes, a rock or a piece of wood can be thrown in the wrong direction. By putting the MOD in mulch position, it’s a safe bet you’ll never hit one of these.

ZTrak™ PRO 900 Series

Eliminate broken windshields

Mulch On Demand™

How the MOD deck works.

19

More than just mowing. We took one of the hardest working machine in the business and made it one of the most flexible as well, thanks to this wide assortment of accessories and attachments. To pick up some extra trash or bag the clippings on a wet day check out the following additions to this fine machine:

Attachments Available attachments for the ZTrak models include:

• Material Collection Systems • Hitch • Trash Receptacle kit • Lights • Striping kit • Mulching kit • Suspension Seat kit • Anti-skid mat • Canopy See your local John Deere Dealer for full line of attachment and model compatibility.

Dump-from-seat MCS This 14-bushel, large-capacity hopper allows for longer mowing between dumpings. The blower is constructed of 7-gauge steel and the fan is made out of high-density polyethylene material. Best of all, putting it on or off requires no tools. 20

Attachments

Lighting Kit The front light kit provides the ability to mow at twilight as well as early in the morning, letting you mow safely in low-light conditions. Features two lights, and mounting hardware.

Roller Striping Kit Attaches easily to the side-discharge mower decks. The 2-in. roller has h-in. wall thickness of strong tubular steel. An internal axle runs the entire length with bearings on both sides.

This 14-bushel, three-bag hopper has a Quik-Tatch mounting system for easy installation and removal.

Trash Receptacle Kit Enables trash pickup and storage without leaving mower seat. Keeps bucket out of way and away from trim side of mower.

ZTrak™ PRO 900 Series

3-Bag MCS System

21

997 Diesel ZTrak™ When you need brute power in a zero turn mower. Whether mowing with a side-discharge deck, a reardischarge deck, or with a mulching deck, the 997 excels in the toughest mowing conditions. In short, the heavy-duty, large-capacity 997 gives you front-mower like power in a zero-turn mower while providing the productivity and dependability you value. Power is in ample supply, thanks to a 31 hp† diesel engine. This engine provides more displacement and peak torque than most competitive mowers, which allows you to maximize acres mowed per hour. Shaft-driven mower decks are available in 60- or 72-in. 7-Iron PRO sidedischarge decks or a 60-in. rear discharge deck.

Powerful Diesel Engine The 3-cylinder diesel engine features a high torque reserve that provides plenty of power. It’s liquid cooled for more consistent operating temperatures and features direct fuel injection for more efficient combustion and improved starting.

22

Diesel

Comfort and Convenience

Hydraulic Shaft Drive

This standard package combines large, ergonomicallyangled control levers with specially padded grips to provide unmatched comfort and reduced fatigue. The control levers have built-in electronic controls to raise or lower the mower deck or disengage the mower blades.

The hydrostatic drive features a Kanzaki dual-unitized hydraulic pump. This dual pump in a single housing provides longer life and less maintenance than competitive units. The pump features a shaft-driven fan for added cooling and longer component life.

Deck Height Adjustment

Standard ROPS

This innovative, low effort dial height-of-cut adjustment has fifteen height-of-cut positions from 1.5 inches to 5 inches in 1/4 inch increments, allowing you to change the height of cut without ever leaving your seat

Folding Two Post Roll Over Protection Structure (ROPS) and seat belt are standard equipment. ROPS can be positioned quickly and easily with out the use of tools.

An open engine compartment allows full access to engine components and service point. Flip-up seat allows easy access to the hydraulic system. And a flip-out panel allows easy entry to the deck spindles.

997 Diesel ZTrak™

Easy to Service and Maintain

23

Specifications

Z910A

Z920A

Z925A / Z925EFI

20.5 hp* (15.3 kW) 44.5 cu. in. (730 cc) Vertical 2.0 U.S. quart (1.89 L) Air Heavy-duty canister type w/ safety Gas 11.5 U.S. gallons (43.5 L)

23.5 hp* (17.5 kW) 44.5 cu. in. (730 cc) Vertical 2.0 U.S. quart (1.89 L) Air Heavy-duty canister type w/ safety Gas 11.5 U.S. gallons (43.5 L)

24.5 hp* (18.3 kW) / 24.6 hp* (18.4 kW) 52 cu. in. (852 cc) / 45.6 cu. in. (747 cc) Vertical 2.0 U.S. quart (1.89 L) Air Heavy-duty canister type w/ safety Gas 11.5 U.S. gallons (43.5 L)

Standard, digital Brake and Go (standard)

Standard, digital Brake and Go (standard)

Standard, digital Brake and Go (standard)

On-board

On-board

On-board

Tuff-Torq® heavy-duty ground drive 2.8 U.S. quarts (2.65 L) (per side) Internal, replaceable 0-10.5 mph (0-16.9 km/h) 0-5 mph (0-8.1 km/h) 24x9.5-12 Turf (48 in. deck), 24x12-12 Turf (54 in. deck) No Flat, Semi-pnuematic rounded shoulder, 13x6.5-6

Tuff-Torq® heavy-duty ground drive 2.8 U.S. quarts (2.65 L) (per side) Internal, replaceable 0-10.5 mph (0-16.9 km/h) 0-5 mph (0-8.1 km/h) 24x9.5-12 Turf (48 in MOD Deck), 24x12-12 Turf (54 in. & 60 in. deck) No Flat, Semi-pnuematic rounded shoulder, 13x6.5-6

Tuff-Torq® heavy-duty ground drive 2.8 U.S. quarts (2.65 L) (per side) Internal, replaceable 0 - 12 mph (0-19.3 km/h) 0-5 mph (0-8.1 km/h) 24x12-12 No Flat, Semi-pnuematic rounded shoulder, 13x6.5-6

Internal wet disk Foot pedal

Internal wet disk Foot pedal

Internal wet disk Foot pedal

Electro-magnetic (250 lb. ft.) Pull knob

Electro-Magnetic (200, 250 ft-lbs.) Pull knob

Electro-magnetic (250 lb. ft.) Pull knob

48 in. & 54 in. (121.9 cm) & (137.2 cm) One-piece stamped steel 7 ga. (0.177 in.) 1.5-5.0 in. (3.8-12.7 cm) 0.25 in. (0.6 cm) 18,000 f/m

48 in. , 54 in. , 60 in (121.9 cm), (137.2 cm)& (152.4 cm) 48in. MOD (121.9 cm) One-piece stamped steel 7 ga. (0.177 in.) 1.5-5.0 in. (3.8-12.7 cm) 0.25 in. (0.6 cm) 18,000 f/m

60 in. (152.4 cm) / 60 in. (152.4 cm) 54in. MOD (137.2 cm) / 54in. MOD (137.2 cm) One-piece stamped steel 7 ga. (0.177 in.) 1.5-5.0 in. (3.8-12.7 cm) 0.25 in. (0.6 cm) 18,000 f/m

Double captured right, center, and left Double captured right, center and left

Double captured right, center, and left Double captured right, center and left

Double captured right, center, and left Double captured right, center and left

84 in. (213.4 cm) 62 in., 68 in. (157.5, 172.7 cm) 73 in. (185.4 cm) 47 in (119.4 cm) 5 in. (12.7 cm) 1320 lbs. (599 kg) (w/48" deck)

84 in. (213.4 cm) 62 in., 68 in., 74 in (157.5, 172.7, 188 cm) 73 in. (185.4 cm) 47 in (119.4 cm) 5 in. (12.7 cm) 1320 lbs. (599 kg) (w/48" deck)

84 in. (213.4 cm) 68 in., 74 in. (172.7, 188 cm) 73 in. (185.4 cm) 47 in (119.4 cm) 5 in. (12.7 cm) 1408 lbs. (639 kg) (w/60" deck)

2 year unlimited hours + 3rd year up to1500 hours

2 year unlimited hours + 3rd year up to1500 hours

2 year unlimited hours + 3rd year up to1500 hours

Engine Certified Horsepower (gross)* Displacement Crankshaft Orientation Crankcase Capacity Cooling Air Cleaner Fuel Type Fuel Tank Capacity Hour Meter Operator Presence Starting System Diagnostics Type Drive Train Hydraulic Drive Hydraulic Capacity Filter Travel Speed Forward Travel Speed Reverse Drive Tires Front Caster Wheels Brakes Park Brake Park Brake Actuation PTO Type PTO Activation/Deactivation Mower Deck Available Side Discharge Widths Available Mulch On Demand Widths Deck construction Deck thickness Height-of-Cut Range Increments Blade Tip Speed Anti-Scalp Wheels Front Anti-Scalp Wheels Rear Anti-Scalp Wheels Dimensions Length Width (deck chute down) Height with ROPS up Height with ROPS Down Ground Clearance Weight Warranty

*The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s web site for additional information.

24

Z960A

Z970A

25.5 hp* (19 kW) 52 cu. in. (852 cc) Vertical 2.0 U.S. quart (1.89 L) Air Heavy-duty canister type w/ safety Gas 11.5 U.S. gallons (43.5 L)

27 hp* (20.1 kW) 52 cu. in. (852 cc) Vertical 2.0 U.S. quart (1.89 L) Air Heavy duty canister type w/ safety Gas 11.5 U.S. gallons (43.5 L)

31 hp* (23.1 kW) 61 cu. in. (999 cc) Vertical 2.0 U.S. quart (1.89 L) Air Heavy duty canister type w/ safety Gas 11.5 U.S. gallons (43.5 L)

35 hp* (26.1 kW) 61 cu. in. (999 cc) Vertical 2.0 U.S. quart (1.89 L) Air Heavy duty canister type w/ safety Gas 11.5 U.S. gallons (43.5 L)

Standard, digital Brake and Go (standard)

Standard, digital Brake and Go (standard)

Standard, digital Brake and Go (standard)

Standard, digital Brake and Go (standard)

On-board

On-board

On-board

On-board

Tuff-Torq® heavy-duty ground drive 2.8 U.S. quarts (2.65 L) (per side) Internal, replaceable 0 - 12 mph (0-19.3 km/h) 0-5 mph (0-8.1 km/h) 24x12-12 No Flat, Semi-pnuematic rounded shoulder, 13x6.5-6

Tuff-Torq® heavy-duty ground drive 2.8 U.S. quarts (2.65 L) (per side) Internal, replaceable 0 - 12 mph (0-19.3 km/h) 0-5 mph (0-8.1 km/h) 24x12-12 No Flat, Semi-pnuematic rounded shoulder, 13x6.5-6

Tuff-Torq® heavy-duty ground drive 2.8 U.S. quarts (2.65 L) (per side) Internal, replaceable 0 - 12 mph (0-19.3 km/h) 0-5 mph (0-8.1 km/h) 24x12-12 No Flat, Semi-pnuematic rounded shoulder, 13x6.5-6

Tuff-Torq® heavy-duty ground drive 2.8 U.S. quarts (2.65 L) (per side) Internal, replaceable 0 - 12 mph (0-19.3 km/h) 0-5 mph (0-8.1 km/h) 24x12-12 No Flat, Semi-pnuematic rounded shoulder, 13x6.5-6

Internal wet disk Foot pedal

Internal wet disk Foot pedal

Internal wet disk Foot pedal

Internal wet disk Foot pedal

Electro-magnetic (250 lb. ft.) Pull knob

Electro-magnetic (250 lb. ft.) Pull knob

Electro-magnetic (250 lb. ft.) Pull knob

Electro-magnetic (250 lb. ft.) Pull knob

60 in. w/C&C, 72 in. (152.4 & 182.9 cm) 60 in. MOD (152.4 cm) One-piece stamped steel 7 ga. (0.177 in.) 1.5-5.0 in. (3.8-12.7 cm) 0.25 in. (0.6 cm) 18,000 f/m

60 in., 72 in. w/C&C (152.4 & 182.9 cm) 60 in. MOD (152.4 cm) One piece stamped steel 7 ga. (0.177 in.) 1.5-5.0 in. (3.8-12.7 cm) 0.25 in. (0.6 cm) 18,000 f/m

60 in w/C&C., 72 in. w/C&C (152.4 & 182.9 cm) 60 in. MOD w/C&C * (152.4 cm) One piece stamped steel 7 ga. (0.177 in.) 1.5-5.0 in. (3.8-12.7 cm) 0.25 in. (0.6 cm) 18,000 f/m

72 in. w/C&C (182.9 cm)

Double captured right, center, and left Double captured right, center and left

Double captured right, center, and left Double captured right, center and left

Double captured right, center, and left Double captured right, center and left

Double captured right, center, and left Double captured right, center and left

84 in. (213.4 cm) 74 in., 86 in. (188, 218.4 cm) 73 in. (185.4 cm) 47 in (119.4 cm) 5 in. (12.7 cm) 1408 lbs. (639 kg) (w/60" deck)

84 in. (213.4 cm) 74 in., 86 in. (188, 218.4 cm) 73 in. (185.4 cm) 47 in (119.4 cm) 5 in. (12.7 cm) 1408 lbs. (639 kg) (w/60" deck)

84 in. (213.4 cm) 74 in., 86 in. (188, 218.4 cm) 73 in. (185.4 cm) 47 in (119.4 cm) 5 in. (12.7 cm) 1449 lbs. (658 kg) (w/60" MOD deck)

84 in. (213.4 cm) 86 in. (218.4 cm) 73 in. (185.4 cm) 47 in (119.4 cm) 5 in. (12.7 cm) 1501 lbs. (681 kg) (w/72" deck)

2 year unlimited hours + 3rd year up to1500 hours

2 year unlimited hours + 3rd year up to1500 hours

2 year unlimited hours + 3rd year up to1500 hours

2 year unlimited hours + 3rd year up to1500 hours

One piece stamped steel 7 ga. (0.177 in.) 1.5-5.0 in. (3.8-12.7 cm) 0.25 in. (0.6 cm) 18,000 f/m

ZTrak™ 700 Series • ZTrak™ PRO 900 Series • 997 Diesel ZTrak™

Z950A

Specifications

Z930A

*The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s web site for additional information.

25

Specifications

Z710A

Z720A

Engine Certified Horsepower (gross)* Displacement Crankshaft Orientation Crankcase Capacity Cooling Air Cleaner Fuel System Fuel Tank Location Fuel Type Fuel Tank Capacity

19.7 hp* (14.7 kW) 674cc Vertical 2.0 U.S. quart (1.89 L) Air Heavy-duty dual stage

21.9 hp* (16.3 kW) 725cc Vertical 2.0 U.S. quart (1.89 L) Air Heavy-duty dual stage

Left side Gas 7 U.S. gallons (26.5 L)

Left side Gas 7 U.S. gallons (26.5 L)

Solenoid shift

Solenoid shift

Standard, digital Brake & Go™ (standard)

Standard, digital Brake & Go™ (standard)

Tuff-Torq® 10cc piston w/gear reduction 2.95 U.S. quarts per side (2.79 L) Internal, replaceable 0-10 mph (0-16.1 km/h) 0-4.5 mph (0-7.2 km/h)

Tuff-Torq® 10cc piston w/gear reduction 2.95 U.S. quarts per side (2.79 L) Internal, replaceable 0-10 mph (0-16.1 km/h) 0-4.5 mph (0-7.2 km/h)

22x9.5-12 Turf (48 in. deck) 22X11-10 (54 in. deck) pneumatic, round shoulder 13x5-6

22X11-10 pneumatic, round shoulder 13x5-6

Internal wet disk Foot pedal

Internal wet disk Foot pedal

Electro-magnetic (125 lb. ft.) Pull knob

Electro-Magnetic (200 ft-lbs.) Pull knob

48 in. & 54 in. (121.9 cm) & (137.2 cm) One-piece stamped steel 7 ga. (0.177 in.) 1.5-5.0 in. (3.8-12.7 cm) 0.25 in. (0.6 cm) 18,000 f/m

60-in (152.4 cm) One-piece stamped steel 7 ga. (0.177 in.) 1.5-5.0 in. (3.8-12.7 cm) 0.25 in. (0.6 cm) 18,000 f/m

Double captured right, center, and left Optional

Double captured right, center, and left Optional

84 in. (213.4 cm) 62 in., 68 in. (157.5, 172.7 cm) 73 in. (185.4 cm) 47 in (119.4 cm) 5 in. (12.7 cm) 1092lb, 500 kg (48 in) 1107 lb, 507 kg (w/54” deck)

84 in. (213.4 cm) 74 in (188 cm) 73 in. (185.4 cm) 47 in (119.4 cm) 5 in. (12.7 cm) 1132 lb (518 kg)

3 year or 700 hour commercial warranty

3 year or 700 hour commercial warranty

Electrical System Ignition Hour Meter Operator Presence Starting System Drive Train Hydraulic Drive Hydraulic Capacity Filter Travel Speed Forward Travel Speed Reverse Tires Drive Tires Front Caster Wheels Brakes Park Brake Park Brake Activation/Deactivation PTO Type PTO Activation/Deactivation Mower Decks Available Side Discharge Widths Deck construction Deck thickness Height-of-Cut Range Increments Blade Tip Speed Anti-Scalp Wheels Front Anti-Scalp Wheels Rear Anti-Scalp Wheels Dimensions Length Width (deck chute down) Height with ROPS up Height with ROPS Down Ground Clearance Weight Warranty**

Horsepower (gross)† Displacement Crankcase Capacity Oil Filter Lubrication Cooling Air Cleaner Pre-Cleaner

31 hp† (23.1 kW) @ 3000 rpm 81 cu. in. 3.8 U.S. quart (3.6 L) Full flow, replaceable, Spin-on type Full pressure Liquid Dry-type, replaceable Yes

Fuel System Fuel Type Fuel Tank Capacity Fuel Tank Switch/Shut Off Valve

Diesel 12 gal (45.4 L) Yes

Drive Train Hydraulic Pumps Wheel Motors Travel Speed Forward Travel Speed Reverse Speed and Direction Control Hydraulic Capacity Hydraulic Oil Cooler Filter Brakes

Kanzaki DUP 17S Parker Ross 0-11.5 mph (0-18.5 km/h) 0-5 mph (0-8.1 km/h) Zero turn 3.2 U.S. gal (12.1 L)(tank capacity) Yes Spin-on Type

Dynamic Braking Park Brake Park Brake Actuation PTO

Dual hand controlled levers Caliper disc brake Hand lever

Type Drive Mower Decks

Hydraulic clutch Internal wet disk clutch

Available Widths Deck construction Deck thickness Height-of-Cut Range Increments Blade Tip Speed Wheels

60, 72 in. (152.4 & 182.9 cm), and 60 in. (152.4 cm) rear discharge 7-Iron PRO (except for 60” RD) 7 gauge (.177 in.) stamped steel 1.5-5.0 in. (3.8-12.7 cm) 0.25 in. (0.6 cm) 18,000 f/m (SD), 17,500 f/m (RD)

Caster Wheel Type Caster Wheel Size

Pneumatic 15-6-6

Front/Rear Anti-Scalp Rollers

LH, RH, Center

Dimensions Length

96 in. (60 in. SD) (243.8cm)

Width Height Weight

74 in (60 in SD) (188cm) 85 in (ROPS up) (215.9cm) 1774 lb. 60 in. SD (804.7kg)

Warranty

*The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s web site for additional information.

26

997 Diesel Engine

† The engine horsepower information is provided

3 year or 1800 hour commercial, no hour limitation for the first 24 months

by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower will be less.

A dealer who “gets” the commercial business. John Deere knows keeping your equipment up and running is job number one. Every one has factory-trained technicians, a comprehensive parts inventory and a commitment to keep your business moving. A three-year single-source “bumper-to-bumper” limited warranty on ZTrak™ PRO Series and 997s. Covers the whole machine for three years. Your dealer handles every warranty claim, from transmissions to engines. So thereÕs no need to go to component suppliers for service. Ever. Parts in stock. Bottom line, with John Deere youÕll always get the part you need right away. In those rare instances when a part is not in stock, youÕll have it the next day. You can even preorder parts 24/7/365 at JDParts.com. Flexible and seasonal financing.* Your business is seasonal, thatÕs why many of our finance options are set up to account for the variations in your available cash flow during the year. ThereÕs more, but you get the picture. After over 175 years supporting professionals who make their living working the land, we know what it takes to help you succeed. See your dealer for the full story.

*Conditions apply. Finance available through John Deere Financial Limited (Australian Credit Licence 391484) to approved applicants only.

The John Deere Difference

You get the best of an entire company with every purchase.

JohnDeere.com.au | JohnDeere.co.nz

Proud sponsor of

This literature has been compiled for worldwide circulation. While general information, pictures and descriptions are provided, some illustrations and text may include finance, credit, insurance, product options and accessories NOT AVAILABLE in all countries or regions, and in some countries products and accessories may require modifications or additions to ensure compliance with the local regulations of those countries. PLEASE CONTACT YOUR LOCAL DEALER FOR DETAILS. John Deere reserves the right to change specifications, design and price of products described in the literature without notice. John Deere, the leaping deer symbol, and John Deere’s green and yellow trade dress are the trademarks of Deere & Company. *The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s web site for additional information. † The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower will be less.

CP6732 (03-12)

**Hour and/or usage limitations apply and vary by model. See the limited warranty for new John Deere Commercial equipment at dealer for details.