Your partner for
RIGID PACKAGING SOLUTIONS
Clear, clean and tough
www.ineos.com
CONTENT High density polyethylene grades Low density polyethylene grades Polypropylene grades
1 6 10
High density polyethylene grade range INEOS Olefins & Polymers Europe operates leading and proprietary slurry and gas production technologies TM TM (INNOVENE S and INNOVENE G) associated with a range of catalyst systems to produce grades tailored for a wide range of end use applications. Medium molecular weight homopolymer grades with high rigidity for the packaging of liquid food and non-aggressive liquids and creams. Medium molecular weight copolymer grades with various levels of environmental stress cracking resistance (ESCR) to meet requirements of industrial and household applications. High molecular weight copolymer grades with optimised impact and environmental stress cracking resistance for the production of larger tanks and containers for chemicals. Narrow molecular weight distribution grades with medium to high melt indexes for industrial and food packaging applications requiring good impact, stiffness and environmental stress cracking resistance (ESCR). Broader molecular weight distribution grades with low to medium melt indexes for a wide range of packaging applications requiring high environmental stress cracking resistance (ESCR).
1
Injection moulding range Grade
RIGIDEX® HD5130EA ®
RIGIDEX HD5050EA ®
MFR
Density
Tensile modulus
190°C/2.16kg g/10min
Annealed kg/m3
23°C MPa
ISO 1133
ISO 1183-1
ISO 527-2
2.4
952
1200
4
950
1100
RIGIDEX HD5050UA
4
950
1100
RIGIDEX® HD6030BM
4
960
1500
RIGIDEX® HD5450UA
4.7
953.5
1100
RIGIDEX® HD5060UA
5.5
950
1100
®
5.5
957
1300
®
RIGIDEX HD6070EA
7.6
960
1500
RIGIDEX® HD6070UA
7.6
960
1500
RIGIDEX HD5760UA
®
RIGIDEX HD5211EA
11
951
1100
RIGIDEX® HD5218EA
18
952
1200
RIGIDEX® HD5226EA
26
953
1150
2
RIGID PACKAGING SOLUTIONS
Charpy impact strength
Application
Notched, 23°C kJ/m2
ISO 179-1 8
For applications requiring high ESCR, caps & closures, bins, technical parts
5.5
For applications requiring high ESCR, caps & closures, bins, crates & boxes, household items
5.5
UV stabilised version of HD5050EA
5
Multimodal grade for applications requiring high stiffness and ESCR, cartridges, caps & closures, technical parts, bins, crates & boxes, household items
5
UV stabilised grade for heavy duty outdoor use items, large dustbins, pails, pallet boxes, technical parts
5.5
UV stabilised grade for heavy duty outdoor use items, large dustbins, pails, pallet boxes, technical parts
4.5
UV stabilised grade for heavy duty outdoor use items, large dustbins, pails, pallet boxes, technical parts
4
For caps & closures, over caps, cartridges, crates, pallets, pails
4
UV stabilised version of HD6070EA
3.5
For thin wall applications, pails, cartridges, toys, caps & closures
3
For fast cycling thin wall applications, caps & closures, pails, houseware
2.5
For fast cycling thin wall applications, caps & closures, pails, houseware
3
Blow moulding high molecular weight range Grade
®
RIGIDEX HM5420XPH
MFR
Density
Flexural modulus
190°C/21.6kg
Annealed
23°C
g/10min
kg/m3
MPa
ISO 1133
ISO 1183-1
ISO 178
2
953
1300
4.2
946
1100
RIGIDEX HM4560UA
6
948
900
RIGIDEX® HM5060XA
6
950
1000
RIGIDEX® HM5411EA
10
952
1100
K46-06-185 ®
Blow moulding medium molecular weight range Grade
RIGIDEX® HD5502S ®
RIGIDEX HD6007S ®
MFR
Density
Flexural modulus
190°C/2.16kg g/10min
Annealed kg/m3
23°C MPa
ISO 1133
ISO 1183-1
ISO 178
0.2
955
1050
0.6
962
1700
RIGIDEX HD4820EA
2.5
952
950
RIGIDEX® HD5802BM
0.3
958
1200
RIGIDEX® HD5802BM-R
0.3
956.5
1150
4
RIGID PACKAGING SOLUTIONS
ESCR BTT
Application
50°C/100% h
ASTM 1693-97a > 1000
High stiffness and enhanced toughness grade for large blow moulded articles, UN and L-Ring containers for dangerous goods packaging
> 1000
Car fuel tank
> 1000
Exceptional level of impact and ESCR, UV stabilised grade for IBC, large tank production
> 1000
Very high level of impact and ESCR grade, tailored for 25L container production
> 1000
General purpose grade with high level of impact and ESCR, 1 to 25L containers
ESCR BTT
Application
50°C/100% h
ASTM 1693 50
General purpose grade with exceptional level of impact performance
20
High rigidity homopolymer grade for fresh milk and non-aggressive chemicals
35
Specially formulated grade for exceptional levels of gloss
> 200
Multimodal grade with high stiffness and exceptional ESCR allowing significant weight reduction, chemical and detergent packaging
> 200
Multimodal grade with high stiffness and exceptional ESCR allowing significant weight reduction, chemical and detergent packaging
5
Low density polyethylene grade range INEOS Olefins & Polymers Europe has developed a range of low density Polyethylene grades produced on state-ofthe-art autoclave technology. These grades are free of any
Low density polyethylene grades (all additive free) Grade
MFR
Density
Flexural modulus
Melting point
190°C/2.16kg g/10min
Annealed kg/m3
23°C MPa
10°C/min °C
ISO 1133
ISO 1183-1
ISO 178
INEOS DSC
17L430
4
917
125
106
23L430
4.5
924
190
113
23L430B
4.5
923
190
111
19N430
7.5
920
145
108
19N430B
7.5
920
145
108
19N930
7.5
920
145
108
20P430
8.8
920.5
145
108
18R430
15
919
115
107
23T930
22
923
180
110
23W930
36
924
180
111
24W930
55
923
160
110
23X930
70
924
170
111
6
RIGID PACKAGING SOLUTIONS
additive and are specifically suitable for the production of injection moulded products of colour concentrates and additive masterbatches for the moulding industry.
Shore hardness D
Vicat
Application
A (10N) °C
ISO 868
ISO 306
45
86
For general purpose injection moulding
52
98
For general purpose injection moulding
52
96
For general purpose injection moulding
47
88
For general purpose injection moulding
47
88
For general purpose injection moulding
47
88
For injection moulding of thin walled containers and caps & closures
44
87
For injection moulding of thin walled containers and caps & closures
40
78
For injection moulding of thin walled containers and caps & closures
49
92
For injection moulding of thin walled containers, caps & closures and compounding
48
90
For injection moulding of thin walled containers, caps & closures and compounding
47
89
For injection moulding of thin walled containers, caps & closures and compounding
48
89
For injection moulding of thin walled containers, caps & closures and compounding
7
Metallocene mLLDPE ELTEX® grade range ELTEX® PF Metallocene products are manufactured in Europe, based on unique proprietary gas-phase process
Metallocene C6 mLLDPE range (all with antioxidants) Grade
MFR
Density
Flexural modulus
190°C/2.16kg g/10min
Annealed kg/m3
23°C MPa
ISO 1133
ISO 1183-1
ISO 178
PF6130AA
3.6
918
168
PF6140AA
4.5
918
168
PF6180AA
8
916
165
PF1315AA
15
914
145
PF1320AA
20
913
130
8
RIGID PACKAGING SOLUTIONS
and catalyst technology. Since January 2013, INEOS has dedicated one plant exclusively to mLLDPE production.
Melting point
Application
10°C/min °C
INEOS DSC 104/117 104/117
For injection moulding of flexible products and production of masterbatch and compounds
101/116 96/114 96/114
9
Polypropylene grade range INEOS O&P Europe operates four proprietary or nonproprietary gas and bulk production technologies (INNOVENETM PP and others) to produce a broad pallet of polypropylene grades for the extrusion, blow moulding and injection moulding markets. Homopolymer grades for optimum stiffness, excellent hot fill characteristics and the best transparency from the latest generation clarifier.
Homopolymer injection moulding range (low & medium MFR) Grade
MFR
Flexural modulus
Izod impact
HDT
230°C/2.16kg g/10min
23°C MPa
Notched, 23°C kJ/m2
0.45MPa °C
ISO 1133
ISO 178
ISO 180/1A
ISO 75/B
100-GA03
3
1450
4
93
150-GA03
3
1450
4
92
100-GA04
4
1400
3
86
100-GB06
6
1450
3.5
86
101-CA06
6
1750
3
119
100-GA09
9
1500
3.5
104
101-SA09
9
1450
3.5
103
100-AA12
12
1450
3
90
100-GA12
12
1400
3.7
90
10
RIGID PACKAGING SOLUTIONS
Random copolymer from low to very high flow with very good to exceptional clarity and gloss obtained with the latest generation clarifier, all with very good stiffness and room or fridge temperature impact resistance. Impact copolymer grades with excellent stiffness, cold temperature impact strength and chemical resistance.
Nucleated
Antistatic
Application
no
no
General purpose grade with very good rigidity and high heat resistance for injection moulding
no
no
General purpose grade with very good rigidity and high heat resistance for injection moulding
no
no
General purpose grade with very good rigidity and high heat resistance for injection moulding of rigid packaging and caps & closures
no
no
General purpose grade for injection moulding of technical mouldings and caps & closures
yes
yes
For injection stretch blow moulding
no
no
General purpose grade for caps & closures, containers, straws and flexible packaging
no
no
Slip additive containing grade for caps & closures with right lubrication level to meet the opening torque requirements for screw caps
no
yes
For injection moulding of thin wall containers, media packaging, houseware, plungers for empty disposable 3-part syringes, caps & closures
no
no
General purpose grade intended for containers, caps & closures, garden furniture, houseware
11
Homopolymer injection moulding range (high MFR) Grade
MFR
Flexural modulus
Izod impact
HDT
230°C/2.16kg
23°C
Notched, 23°C
0.45MPa
g/10min
MPa
kJ/m2
°C
ISO 1133
ISO 178
ISO 180/1A
ISO 75/B
ELTEX P HCW280
20
2200
2.7
130
100-GB25
25
1200
3.2
102
®
100-CB25
25
1500
3.9
110
100-HR25
25
1800
3.3
126
194-NA25
25
1750
3
116
100-GA35
35
1350
3.3
78
100-CA50
50
1550
3
115
100-CC60
60
1800
3
118
Grade clarified with the latest generation clarifying agent
12
RIGID PACKAGING SOLUTIONS
Nucleated
Antistatic
Application
yes
yes
Grade with high isotacticity and remarkably high stiffness for applications typical of Styrenic polymers: household goods, food packaging, appliances
no
no
General purpose grade for high speed moulding in multi-cavity tooling applications like thin wall parts and garden furniture
yes
yes
For high speed injection moulding of rigid packaging, thin wall containers, technical parts, houseware, media packaging and garden furniture
yes
yes
For high speed injection moulding of thin-walled injection moulded articles, caps & closures, technical and electronic parts
yes
yes
Clarified grade for injection of consumer products, transparent containers and medical syringes
no
no
General purpose grade for thin wall injection moulding, masterbatch and compound applications
yes
yes
Grade designed for high speed injection moulding of thin walled containers for dairy and fresh food, food trays, houseware articles and disposables
yes
yes
Clarified grade with excellent rigidity and transparency for thin wall containers, household goods and media packaging
13
Homopolymer blow moulding & extrusion range Grade
14
MFR
Flexural modulus
Izod impact
HDT
230°C/2.16kg
23°C
Notched, 23°C
0.45MPa
g/10min
MPa
kJ/m2
°C
ISO 1133
ISO 178
ISO 180/1A
ISO 75/B
100-GA01
0.9
1550
4.5
98
100-GA02
2
1450
4
95
150-GA02
2
1450
4
93
151-GA02
2
1300
4
92
100-GA03
3
1450
4
93
100-NB03
3
1800
3
126
102-CA03
3
1800
3
126
150-GA03
3
1450
4
92
100-GA04
4
1400
3
86
100-GB06
6
1450
3.5
86
101-CA06
6
1750
3
119
RIGID PACKAGING SOLUTIONS
Nucleated
Antistatic
Application
no
no
General purpose grade with very good rigidity and high heat resistance used for sheets, blow moulding and strapping applications
no
no
Very good rigidity and high heat resistance grade used in thermoforming of food containers, yoghurt cups and very thin walled technical mouldings
no
no
General purpose grade with very good rigidity and heat resistance used in thermoforming, sheets, strapping and small rigid blow moulding applications
no
no
For sheet extrusion applications requiring a good melt strength and processability
no
no
General purpose grade with very good rigidity and high heat resistance for extrusion and thermoforming applications
yes
no
For sheet extrusion and thermoforming applications like beer cups, transparent trays for biscuits, fruits and vegetables, food containers
yes
low level
For sheet extrusion and thermoforming applications like transparent trays for biscuits, fruits and vegetables, food containers
no
no
General purpose grade with very good rigidity and high heat resistance used in thermoforming, sheets and strapping
no
no
General purpose grade with very good rigidity and high heat resistance intended for extrusion and thermoforming applications
no
no
General purpose grade for extrusion applications like thin sheet extrusion, thermoforming
yes
yes
For applications like very transparent and rigid sheets for thermoformed food and non food containers
15
Random copolymer injection moulding range (all clarified) Grade
MFR
Flexural modulus
Izod impact
230°C/2.16kg g/10min
23°C MPa
Notched, 23°C kJ/m2
ISO 1133
ISO 178
ISO 180/1A
240-CA12
13
850
8
200-CA13
13
1100
6
®
ELTEX P 203-0R25
25
1100
5
205-CA25
25
1100
5
240-HP25 (*)
25
1200
6
200-CA25
25
1100
5
240-HP40 (*)
40
1100
5.5
205-CA40
40
1100
5
200-CA40
40
1100
5
200-CA70
70
1100
4
240-HP80 (*)
80
1100
5
Grade clarified with the latest generation clarifying agent (*) Available also in guaranteed organoleptic version
EXCLUSION OF LIABILITY: The information contained in this brochure, as at the date of publication, is accurate to the best knowledge and belief of INEOS Europe AG and its affiliates («INEOS») and any further information or advice provided by INEOS relating to INEOS or third party materials is also given in good faith. INEOS makes no representations or warranties, express or implied, regarding the completeness, quality or accuracy of this or any other information and any decisions you make based on the information contained in this brochure or otherwise provided by INEOS, including as to the suitability or fitness of materials for a particular purpose, are your sole responsibility. The information contained here is subject to change, and your INEOS representative will be happy to help in providing you with the latest version of this information. Please otherwise note that we advise you regularly check the validity of the information you may have already downloaded from our website. Except as required by mandatory law or as expressly provided in INEOS’s standard terms and conditions of sale, INEOS accepts no liability whatsoever arising from the use of information supplied by this brochure or otherwise, or from the application, adaptation or processing of the products described herein, the use of other materials in lieu of INEOS materials or the use of INEOS materials in conjunction with such other materials. RIGIDEX®, ELTEX®, ELTEX P®, ELTEX PF®, RIGIDEX P®, INNOVENETM, INEOS and the breakthrough mark are all trademarks of the INEOS group, used with its permission, and are registered in a number of countries. 16
RIGID PACKAGING SOLUTIONS
Antistatic
Application
yes
Very high clarity, high gloss grade with high impact strength down to 0°C for houseware, caps & closures, lids & pails, appliances
yes
High clarity grade for houseware, injection stretch blow moulded items, caps & closures, lids & pails, appliances
low
Excellent and guaranteed organoleptic properties, high clarity grade for houseware, caps & closures and containers for very sensitive foods
yes
Very high clarity grade for houseware, candy boxes, caps & closures, lids & pails, appliances
yes
High rigidity/impact strength balance, good clarity grade for caps & closures, containers, houseware, injection stretch blow moulded items
yes
High clarity grade for houseware, candy boxes, caps & closures, lids & pails, appliances
yes
High flow, high rigidity/impact strength balance, high clarity grade for houseware, food containers, injection stretch blow moulded items
yes
Very high clarity, high flow grade for caps & closures, houseware, food containers
yes
High clarity, high flow grade for caps & closures, houseware, food containers
yes
Very high flow, high clarity grade for houseware, food containers
yes
Very high flow, high clarity grade with high stiffness/impact balance for houseware, food containers
17
Impact copolymer injection moulding range Grade
MFR
Flexural modulus
Izod impact
230°C/2.16kg
23°C
Notched, -20°C
g/10min
MPa
kJ/m2
ISO 1133
ISO 178
ISO 180/1A
ELTEX TUB 400-IM01
0.8
1500
8 (*)
400-GA03
2.5
1250
7
®
400-GA05
5
1200
6.5
401-NA06
6
1200
3
300-CA06
6
1500
5
®
6.5
1500
4
400-CB08
RIGIDEX P CAP906S
8
1200
6
402-CB12
12
1350
6
540-CA13
13
1150
9.5
500-NA20
20
1250
6
500-GA20
20
1000
6
400-CA25
25
1550
4.5
RIGIDEX® P 451-HP40
38
1350
4.5
401-CB50
50
1300
4.2
401-CA55
55
1100
4
®
60
1400
4.2
®
90
1350
4.2
RIGIDEX P 450-HP60 RIGIDEX P 450-HP90 (*) Notched charpy
18
RIGID PACKAGING SOLUTIONS
Nucleated
Antistatic
Application
yes
no
For fittings and manholes, offering excellent dimensional stability and good long term stability
no
no
For thick wall products such as pallets, crates and large containers
no
no
For appliances, luggage, technical parts and returnable transport packaging
yes
no
For toys, large pails and crates
yes
yes
For toys, houseware, pails and appliances, offering high stiffness
yes
yes
For bi-component screw-caps for carbonated drinks
yes
yes
For returnable transport packaging, offering superior balance of stiffness and impact resistance
yes
yes
For returnable transport packaging, offering superior balance of stiffness and impact resistance
yes
yes
For crates & boxes, luggage as well for the production of compounds, offering very high impact resistance
yes
no
For luggage, large containers and crates, offering very good cold temperature impact resistance
no
no
For toys, appliances and containers, offering very good cold impact temperature
yes
yes
For returnable packaging, pails and houseware, offering high stiffness and low warpage
yes
yes
For ultra-fast moulding of large food and industrial containers
yes
yes
General purpose grade for thin wall containers and technical parts
yes
yes
General purpose grade for thin wall containers and technical parts
yes
yes
Very high flow grade offering a unique combination of high stiffness, good impact resistance and very low warpage
yes
yes
Very high flow grade offering a unique combination of high stiffness, good impact resistance and very low warpage
19
Random copolymer blow moulding & extrusion range Grade
MFR
Flexural modulus
Izod impact
230°C/2.16kg
23°C
Notched, 23°C
g/10min
MPa
kJ/m2
ISO 1133
ISO 178
ISO 180/1A
240-NA02
1.5
900
20
200-CA02
1.7
1000
10
203-NA02
1.9
1100
7
200-GA02
2
950
10
200-NA02
2
1000
10
200-GA04
3.8
950
8
Impact copolymer blow moulding & extrusion range Grade
®
MFR
Flexural modulus
Izod impact
230°C/2.16kg g/10min
23°C MPa
Notched, - 20°C kJ/m2
ISO 1133
ISO 178
ISO 180/1A
ELTEX TUB 433-NA00
0.3
1500
7 (*)
ELTEX® TUB 350-HM00
0.3
1850
6 (*)
ELTEX® TUB 400-IM01
0.8
1500
8 (*)
ELTEX P RF110
0.8
1300
5
401-NA01
1.2
1300
7.5
400-NA01
1.5
1300
7.5
500-NA01
1.5
1300
10
400-GA03
2.5
1250
7
®
(*) Notched Charpy
20
RIGID PACKAGING SOLUTIONS
Clarified
Antistatic
Application
yes
no
Excellent clarity and impact resistance grade for small to medium size bottles & containers for household chemicals & personal care, cosmetics
yes
yes
High clarity grade for blow moulded cosmetics, household chemicals, detergent containers, sheet, thermoformed packaging
yes
no
Grade combining high heat resistance and very good clarity, ideal for the production of hot filled mono- & multilayer barrier bottles and containers
no
no
General purpose grade for small bottle blow moulding, for stationery application sheet extrusion and thermoformed containers
yes
no
Excellent clarity grade for small to medium size bottle blow moulding, for transparent sheets and clear thermoformed containers
no
no
General purpose grade for stationery application sheet extrusion and thermoformed containers
Nucleated
Antistatic
yes
no
For blow moulding of medium to large bottles & containers, offering high stiffness, very good cold impact and excellent melt strength
yes
no
For blow moulding of medium to large bottles & containers, offering very high stiffness, very good cold impact and excellent melt strength
yes
no
For fittings and manholes, offering excellent dimensional and long term thermal stability
no
no
Good cold impact resistance and stiffness, for blow moulding of small to medium size bottles and containers
yes
no
For small to medium size bottles and containers, synthetic cardboard, offering excellent cold impact resistance and good stiffness
yes
no
For small to medium size bottles and containers, synthetic cardboard, offering excellent cold impact resistance and good stiffness
yes
no
For corrugated pipes, conduit pipes and twin-wall sheets offering very high impact with long term stability
no
no
For sheet extrusion and blow moulding with good impact strength
Application
INEOS is one of the world’s largest chemical companies. Founded in 1998, the company employs 15,000 people and has turnover of around 47 billion US Dollars. INEOS Olefins & Polymers Europe is a leading producer of olefins and polyolefins. www.ineos.com
INEOS Olefins & Polymers Europe offers a full range of highly valued polyolefin solutions for selected market applications such as food and industrial packaging, pipe and automotive through dedicated sales, marketing and technical teams. Building on our leading production technologies, strong product development capability and willingness to create a valued and close relationship with customers and end-users, INEOS Olefins & Polymers Europe is committed to serving the current and future needs of the extrusion blow moulding and injection moulding markets where we offer: High density polyethylene grades for the production of small and large containers and bottles, caps and closures, crates, pails, dustbins and many others. Homopolymer, random copolymer and impact copolymer polypropylene grades for the production of high clarity, high stiffness and/or hot fill containers and bottles, high stiffness, high clarity and high impact resistance at cold temperatures moulded products. INEOS Olefins & Polymers Europe has also developed Low density polyethylene grades suitable for the injection moulding process, for the production of colour concentrates and additive materbatches or very specific applications such as medical and pharmaceutical.
© INEOS Olefins & Polymers Europe, November 2014 Images: © www.istockphoto.com, © www.dreamstime.com