Wednesday, March 22, am pm Postersessions of all Sessions

th 13 International Symposium „Conditioning of Radioactive Operational & Decommissioning Wastes“ including th 13 Status Report of BMBF „Decommission...
8 downloads 1 Views 98KB Size
th

13 International Symposium „Conditioning of Radioactive Operational & Decommissioning Wastes“ including th

13 Status Report of BMBF „Decommissioning and Dismantling of Nuclear Facilities“ March 22. – March 24, 2017 at the MARITIM Hotel & Internationales Congress Center Dresden, Germany

Preliminary program

2

Program Overview

Wednesday, March 22, 2017

10.00 am – 10.20 am 10.20 am – 01.00 pm 01.00 pm – 02.00 pm 02.00 pm – 04.00 pm 04.00 pm – 04.30 pm 04.30 pm – 05.30 pm

Welcome and Opening of KONTEC 2017 Plenary Session 1 Lunch break Plenary Session 2 Coffee break Plenary Session 2

Wednesday, March 22, 2017

11.50 am – 01.00 pm

KONTEC DIRECT short lectures* Panel 1: Session 4/ Panel 2: Session 2 KONTEC DIRECT short lectures Panel 1: Session 3/ Panel 2: Session 1

02.30 pm – 03.40 pm

*Please note that each KONTEC DIRECT short lecture will be presented twice during KONTEC 2017. Thus, if you miss a short lecture presentation due to scheduling reasons or lack of space in the lecture forum, you have the opportunity to attend the same lecture at another time. Details on the KONTEC DIRECT Short technical lectures’ program on Wednesday, March 22, 2017 and Thursday, March 23, 2017 are shown in this brochure each following the daily plenary paper program. Please make use of the communication system (headphones and receivers) available for the audience at each lecture forum which will serve you as audio support in a noise loaded area. A simultaneous interpretation will be not be given for KONTEC DIRECT Short technical lectures.

Wednesday, March 22, 2017

10.00 am – 06.00 pm

Postersessions of all Sessions

Wednesday, March 22, 2017

10.00 am – 10.00 pm** Technical Exhibition

**Wednesday, March 22, 2017 06.00 pm –10.00 pm: „Exhibitors‘ Evening“ – Participating exhibitors will keep their exhibition booths open after 6 pm until 10 pm self-organized and invite the KONTEC 2017 attendees warmly for a visit.

Thursday, March 23, 2017

09.30 am – 11.30 am 11.30 am – 12.00 am 12.00 am – 01.00 pm 01.00 pm – 02.00 pm 02.00 pm – 03.00 pm 03.00 pm – 03.30 pm 03.30 pm – 06.10 pm

Plenary Session 2 Coffee break Plenary Session 2 Lunch break Plenary Session 2 Coffee break Plenary Session 3

Thursday, March 23, 2017

11.20 am – 12.30 pm

KONTEC DIRECT short lectures Panel 1: Session 4/ Panel 2: Session 3 KONTEC DIRECT short lectures Panel 1: Session 2/ Panel 2: Session 1

02.00 pm – 04.10 pm

Thursday, March 23, 2017

09.30 am – 06.00 pm

Postersessions of all Sessions

Thursday, March 23, 2017

09.30 am – 06.00 pm

Technical Exhibition

Thursday, March 23, 2017

08.00 pm – midnight

„KONTEC 2017 Banquet“

Friday, March 24, 2017

09.00 am – 10.40 am 10.40 am – 11.10 am 11.10 am – 12.30 pm 12.30 pm – 01.00 pm

01.00 pm

Plenary Session 4 Coffee break Plenary Session 4 Conclusion and Awards for the Best 2017 Plenary, Poster and KONTEC DIRECT short lecture End of Plenary Sessions

Friday, March 24, 2017

09.00 am – 01.00 pm

Postersessions of all Sessions

Friday, March 24, 2017

09.00 am – 01.00 pm

Technical Exhibition

Details on the preliminary program and more information about the conference and participation on the following pages. (Details on KONTEC DIRECT Short technical lectures on Wednesday, March 22, 2017 and Thursday, March 23, 2017 are shown each following the daily plenary paper program)

3

Wednesday, March 22, 2017 Plenary Session 10.00 am

Welcome and opening of the conference Michael Szukala, Chairman of KONTEC Program Committee

10.10 am

Welcome Sabine Diehr, Bundesministerium für Bildung und Forschung BMBF

Session 1: Disposal of radioactive residues from nuclear facilities‘ operation, decommissioning and dismantling Plenary Session Session Chairpersons

Burkhard Hartmann, EnBW Kernkraft GmbH, Obrigheim Rudolf-Josef Printz, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH

10.20 am

(Paper number 010) Project organisation in the optimisation campaign to condition fuel channels at Mühleberg Nuclear Power Plant, Switzerland Dr. Martina Suty, BKW Energie AG, Kernkraftwerk Mühleberg Dr. Thomas Taylor, BKW Energie AG, Kernkraftwerk Mühleberg Markus Rufer, BKW Energie AG, Kernkraftwerk Mühleberg Benjamin Seiler, Westinghouse Electric Germany GmbH et. al.

10.40 am

(Paper number 069) Experiences from the campaign-specific process qualification for the Konrad repository and its pratical implementation using the example of the reactor dismantling at the NPP Obrigheim Ralf Borchardt, EWN Entsorgungswerk für Nuklearanlagen GmbH Ronald Strysewske, EWN Entsorgungswerk für Nuklearanlagen GmbH Torsten Wollermann, EWN Entsorgungswerk für Nuklearanlagen GmbH

11.10 am

(Paper number 047) Renewal of the HDB process qualification using the example of the workflow for the cementation of evaporator concentrates Sindy Kern, Kerntechnische Entsorgung Karlsruhe GmbH Felix Himmerkus, Kerntechnische Entsorgung Karlsruhe GmbH

11.40 am

(Paper number 045) Establishing and validating a clearance procedure for buildings to be demolished at the nuclear power plant Brunsbüttel Dr. Stefan Wörlen, Brenk Systemplanung GmbH Torsten Gosch, Kernkraftwerk Brunsbüttel, Vattenfall Europe Nuclear Energy GmbH Dr. Georg Bacmeister, Kernkraftwerk Brunsbüttel, Vattenfall Europe Nuclear Energy GmbH

12.10 pm

(Paper number 072)

4

DIN 25457 „Activity monitoring system for the release of radioactive material and nuclear plant components” – future requirement to adapt to the German Radiation Protection Law (StrlSchG) Dr. Stefan Thierfeldt, Brenk Systemplanung GmbH Dr. Olaf Nitzsche, Brenk Systemplanung GmbH 12.40 am

(Paper number 091) Water Processing Technology of Toshiba which challenges contaminated water management of Fukushima Daiichi Nuclear Power Plant Henning Fehrmann, Westinghouse Electric Germany GmbH Sho Suzuki, Toshiba Corporation, Nuclear Chemical System Design & Engineering Dept. Hiroko Abe, Toshiba Corporation, Nuclear Chemical and Cycle Technology R&D Dept. Shunsuke Susa, Toshiba Corporation, Nuclear Chemical and Cycle Technology R&D Dept. et. al.

01.00 pm

Lunch break

Session 2: Decommissioning and dismantling of nuclear facilities Plenary Session Session Chairpersons

Stefan Klute, BKW Energie AG Dr. Helmut Steiner, Kernkraftwerk Gundremmingen GmbH

02.00 pm

(Paper number 004) News from decommissioning - A view from the point of view of federal supervision – Development since 2011 Helmut Scheib, BMUB Bundesaufsicht bei Kernkraftwerken

02.30 pm

(Paper number 094) Dismantling of the EnBW-Nuclear Power Plants Anja Graf, EnBW Kernkraft GmbH, Kernkraftwerk Philippsburg Wolfgang Honetschläger, EnBW Kernkraft GmbH, Kernkraftwerk Philippsburg Tobias Hoffmann, EnBW Kernkraft GmbH, Kernkraftwerk Philippsburg

03.00 pm

(Paper number 099) Preliminary feedback on the Barsebäck 1-2 reactor internals segmentation project Per Segerud, Westinghouse Electric Sweden AB Joseph Boucau, Westinghouse Electric Company, Belgium

03.30 pm

(Paper number 104) Dismantling of the reactor pressure vessel internals and the reactor pressure vessel of the Nuclear Power Plants Philippsburg 1 (KKP1) and Neckarwestheim 1 (GKN1) Dr. Frederik Nachtrodt, Westinghouse Electric Germany GmbH Dr. Harald Bienia, NUKEM Technologies Engineering Services GmbH

04.00 pm

Coffee break

Session 2: Decommissioning and dismantling of nuclear facilities (Continuation)

5

Plenary Session Session Chairpersons

Stefan Klute, BKW Energie AG Dr. Helmut Steiner, Kernkraftwerk Gundremmingen GmbH

04.30 pm

(Paper number 096) International Good Practice on Practical Implementation of Characterisation in Decommissioning Arne Larsson, Cyclife-EDF Sweden AB Matthew Emptage, Environment Agency UK Inge Weber, Nuclear Energy Agency (NEA)

05.00 pm

(Paper number 083) Russian Policy, Strategy, Programme and Experience in Decommissioning Sphere Andrei I. Sobolev, Federal Enterprise for Radioactive waste management “RosRAO” A. F. Nechaev, St. Petersburg Institute of Technology I. V. Smirnov, V.G. Khlopin Radium Institute

05.30 Uhr

End of Plenary Session on Wednesday

KONTEC DIRECT Short technical lectures in word & vision *Please note that each KONTEC DIRECT short lecture will be presented twice during KONTEC 2017. Thus, if you miss a short lecture presentation due to scheduling reasons or lack of space in the lecture forum, you have the opportunity to attend the same lecture at another time. Details on the KONTEC DIRECT Short technical lectures’ program on Wednesday, March 22, 2017 and Thursday, March 23, 2017 are shown in this brochure each following the daily plenary paper program. Please make use of the communication system (headphones and receivers) available for the audience at each lecture forum which will serve you as audio support in a noise loaded area. A simultaneous interpretation will be not be given for KONTEC DIRECT Short technical lectures.

Wednesday, March 22, 2017, 11.50 am – 01.00 pm Panel 1 - Session 4 11.50 am

(Paper number 039) – Poster box 48 Carbon-14 release from irradiated stainless steel Eva De Visser-Týnová, NRG Petten 10 minutes for handover

12.10 pm

(Paper number 023) – Poster box 49 Implementation of the –Disposal Committee Guidelines at VKTA – Strahlenschutz, Analytik & Entsorgung Rossendorf e. V. Sabine Fleck, VKTA Dresden 10 minutes for handover

12.30 pm

(Paper number 031) – Poster box 50 Status of waste producer-specific material vectors in the Konrad material list Dr. Karl Weis, Bundesamt für Strahlenschutz

12.50 pm

(Paper number 082) – Poster box 51 Legitimation of on-site Disposal as an Option for Decommissioning of «NUCLEAR LEGACY» Objects Andrei Sobolev, Federal Enterprise for Radioactive waste management enterprise „RosRAO“

10 minutes for handover

Wednesday, March 22, 2017, 11.50 am – 01.00 pm Panel 2 - Session 2 6

11.50 am

(Paper number 007) – Poster box 22 - BMBF Mechanical and thermal tool loads in dry diamond wire sawing of steel Lukas Tatzig, Leibniz Universität Hannover, Institute of Production Engineering and Machine Tools (IFW) 10 minutes for handover

12.10 pm

(Paper number 061) – Poster box 23 Introduction of various procedures when dismantling biological shields of research reactors Dr.-Ing. Carmen Isabella Krau, Siempelkamp NIS Ingenieurgesellschaft mbH

12.30 pm

(Paper number 076) – Poster box 24 Dismantling of chemical cells – disassembly of a concrete shield using a dry rope-saw technique Sonja Biermann, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH

10 minutes for handover

10 minutes for handover

12.50 pm

(Paper number 095) – Poster box 25 Demolition of the Biological Shield at the SVAFO R2 Research Reactor in Sweden Niklas Bergh, Westinghouse Electric Sweden AB

Wednesday, March 22, 2017, 02.30 pm – 03.40 pm Panel 1 - Session 3 02.30 pm

(Paper number 011) – Poster box 35 - BMBF Laser decontamination of concrete- and metal surfaces Georg Greifzu, TU Dresden, Fakultät Maschinenwesen, Institut für Energietechnik, Professur für Wasserstoff- und Kernenergietechnik 10 minutes for handover

02.50 pm

(Paper number 044) – Poster box 36 USER: Use of land farming for energy plant production on heavy metal/radionuclide contaminated areas Prof. Dr. Erika Kothe, Friedrich-Schiller-Universität Jena 10 minutes for handover

03.10 pm

(Paper number 021) – Poster box 37 Waste treatment complex at the Nuclear Power Plant TIANWAN, China Rainer Slametschka, NUKEM Technologies Engineering Services GmbH 10 minutes for handover

03.30 pm

(Paper number 105) – Poster box 38 Civil engineering planning in the nuclear dismantling by means of 3D-CAD-Model Mark Kritzmann, HOCHTIEF Engineering GmbH Consult IKS

Wednesday, March 22, 2017, 02.30 pm – 03.40 pm Panel 2 - Session 1 02.30 pm

(Paper number 015) – Poster box 1 Utilization of the Reactor Pressure Vessel of a Boiling Water Reactor Dr. Niemma Buckanie, GNS Gesellschaft für Nuklear-Service mbH

02.50 pm

(Paper number 013) – Poster box 2 Release measurement of radioactive contaminated soil and debris Dr. Marina Sokcic-Kostic, NUKEM Technologies Engineering Services GmbH

10 minutes for handover

10 minutes for handover

03.10 pm

(Paper number 036) - Poster box 3 „Islands of Release“ when dismantling the Rossendorf Research Reactor

7

Sven Jansen, VKTA Dresden 10 minutes for handover

03.30 pm

(Paper number 063) – Poster box 4 Experience from Dismantling, Decontamination and Release of Thick-Walled Casks and Containers Philipp Diekmann, GNS Gesellschaft für Nuklear-Service mbH

Postersession 10.00 am 06.00 pm

Postersession of all Sessions at the gallerires of ICD halls 1-5, restaurant and hall foyer

Technical Exhibition 10.00 am 10.00 pm

Accompanying Technical Exhibition in the ICD halls 1-5, restaurant and hall foyer 06.00 pm – 10.00 pm: „Exhibitors‘ Evening“ – Participating exhibitors will keep their exhibition booths open after 6 pm until 10 pm self-organized and invite the KONTEC 2017 attendees warmly for a visit.

Thursday, March 23, 2017 Session 2: Decommissioning and dismantling of nuclear facilities (Continuation)

Plenary Session Session Chairpersons

Michael Bächler, Vattenfall Europe Nuclear Energy GmbH, Brunsbüttel Stephan Krüger, PreussenElektra GmbH, Hannover

09.30 am

(Paper number 002) In-situ Decontamination of the Steam Dryer at BWR plants - Recent Experiences with FSD at ISAR 1 NPP and Krümmel NPP Dr. Christian Topf, AREVA GmbH Luis Sempere Belda, AREVA GmbH Michael Fischer, AREVA GmbH Dr. Thomas Erbacher, PreussenElektra GmbH KKW Isar et. al.

10.00 am

(Paper number 022) Rossendorf Research Reactor (RFR) – Overview of dismantling and disposal processes Dr. Reinhard Knappik, VKTA Dresden Markus Steinhardt, VKTA Dresden Kristin Pfützner, VKTA Dresden Steffen Kniest, Siempelkamp NIS Ingenieurgesellschaft mbH et. al.

10.30 am

(Paper number 057) Decommissioning of the Reactor Pressure Vessels by Remote Controlled Thermal Cutting Segmentation Facilities at the ZION Nuclear Power Plant at ZION, USA Stefan Dätig, Siempelkamp NIS Ingenieurgesellschaft mbH Andreas Loeb, Siempelkamp NIS Ingenieurgesellschaft mbH Dieter Stanke, Siempelkamp NIS Ingenieurgesellschaft mbH

8

11.00 am

(Paper number 049) - BMBF Automated disassembly of reactor pressure vessel internals by means of underwater robotics Gunnar Heinzler, AREVA GmbH

11.30 am

Coffee break

Session 2: Decommissioning and dismantling of nuclear facilities (Continuation)

Plenary Session Session Chairpersons

Michael Bächler, Vattenfall Europe Nuclear Energy GmbH, Brunsbüttel Stephan Krüger, PreussenElektra GmbH, Hannover

12.00 am

(Paper number 008) Progress and experience of decommissioning decommissioning challenges at Belgoprocess Bart Ooms, Belgoprocess

projects

and

future

12.20 am

(Paper number 064) Improved efficieny for the structural analysis of the reactor building for the demolition of the inner structure of the building Jörg Möller, EWN Entsorgungswerk für Nuklearanlagen GmbH

12.40 pm

(Paper number 103) Training of the technical staff for the decommissioning and dismantling of nuclear power plants Stefan Stockfleth, KRAFTWERKSSCHULE E.V., Kerntechnik/ Strahlenschutz Michael Bächler, Uniper Technologies GmbH Dr. Matthias Roßkamp, Vattenfall Europe Nuclear Energy GmbH

01.00 pm

Lunch break

Session 2: Decommissioning and dismantling of nuclear facilities (Continuation)

Plenary Session Session Chairpersons

Michael Bächler, Vattenfall Europe Nuclear Energy GmbH, Brunsbüttel Stephan Krüger, PreussenElektra GmbH, Hannover

02.00 pm

(Paper number 051+052) Time management and Frictions in the project process: if it does not precede Dr. Thomas Rütten, Kapellmann und Partner Rechtsanwälte mbB

02.30 pm

(Paper number 097) Experiences from a Research Facility - Implementing Waste Led Decommissioning in Practice Dr. Per Lidar, Studsvik Sweden Magnus Horling, MAX IV Sweden Karin Strid, Studsvik Sweden Arne Larsson, Cyclife-EDF Sweden AB

9

03.00 pm

Coffee break

Session 3: Facilities and systems for the conditioning and packaging of operational and decommissioning wastes Plenary Session Session Chairpersons

Dr. Thomas Hassel, Leibniz Universität Hannover Dr. Michael Weigl, KIT Karlsruher Institut für Technologie

03.30 pm

(Paper number 071) - BMBF Development of a tool system for the surface decontamination of reinforced concrete structures Ulrich Hess, Leibniz Universität Hannover, Institut für Fertigungstechnik und Werkzeugmaschinen Prof. Dr.-Ing. Berend Denkena, Leibniz Universität Hannover, Institut für Fertigungstechnik und Werkzeugmaschinen IFW, PZH Prof. Dr.-Ing. Marcus Geimer, Karlsruher Institut für Technologie D. Engelmann, Karlsruher Institut für Technologie et. al.

03.50 pm

(Paper number 085) Sawing in Hot Cells Udo Knauer, BABCOCK NOELL GmbH

04.10 pm

(Paper number 029) – BMWI/ZIM Investigation of the geometrical influence on hard metal discs when milling concrete Simone Müller, KIT, Institut für Technologie und Management im Baubetrieb, Rückbau konventioneller und kerntechnischer Bauwerke Prof. Dr.-Ing. Sascha Gentes, KIT, Institut für Technologie und Management im Baubetrieb, Rückbau konventioneller und kerntechnischer Bauwerke

04.30 pm

(Paper number 053) The commissioning of a new treatment centre for radioactive waste from high energy accelerators at CERN Luca Bruno, CERN European Organization for Nuclear Research Yvon Algoet, CERN European Organization for Nuclear Research Dr. Luisa Ulrici, CERN European Organization for Nuclear Research Sabine Braun, Kraftanlagen Heidelberg GmbH et. al.

04.50 pm

(Paper number 062) - BMBF Concrete decontamination with dry ice blasting for dismantling of nuclear facility building structures - BEDEKO Oliver Grünzel, Leibniz Universität Hannover, Institut für Werkstoffkunde Dr.-Ing. Thomas Hassel, Leibniz Universität Hannover, Institut für Werkstoffkunde Prof. Dr.-Ing. Hans Jürgen Maier, Leibniz Universität Hannover, Institut für Werkstoffkunde A. Köhler, Leibniz Universität Hannover, Institut für Werkstoffkunde

05.10 pm

(Paper number 003) Industrial Purification Facility for treatment of liquid radioactive waste at Chernobyl Nuclear Power Plant

10

Dr. Alexander Zulauf, NUKEM Technologies Engineering Services GmbH Dr. Georg Brähler, NUKEM Technologies Engineering Services GmbH 05.30 pm

(Paper number 048) - BMBF Improvement of a separation method for the secondary waste treatment from water-abrasive-suspension-cutting-technology Carla-Olivia Krauß, Karlsruher Institut für Technologie (KIT), Institut für Technologie und Management im Rückbau (TMB), Abteilung Rückbau konventioneller und kerntechnischer Bauwerke Martin Brandauer, Karlsruher Institut für Technologie (KIT), TMB Prof. Dr.-Ing. Sascha Gentes, Karlsruher Institut für Technologie (KIT), TMB Prof. Dr. Horst Geckeis, Karlsruher Institut für Technologie (KIT), INE et. al.

05.50 pm

(Paper number 092) TN® MW Multi Waste Package "ALL IN ONE SOLUTION" for Conditioning – Transport – Storage – up to Final Disposal Florence Lefort-Mary, AREVA NC Manfred Blank, AREVA GmbH Christine Lamouroux, AREVA NC C. Hervé, AREVA TN et. al.

06.10 pm

End of Plenary Session on Thursday

KONTEC DIRECT Short technical lectures in word & vision *Please note that each KONTEC DIRECT short lecture will be presented twice during KONTEC 2017. Thus, if you miss a short lecture presentation due to scheduling reasons or lack of space in the lecture forum, you have the opportunity to attend the same lecture at another time. Details on the KONTEC DIRECT Short technical lectures’ program on Wednesday, March 22, 2017 and Thursday, March 23, 2017 are shown in this brochure each following the daily plenary paper program. Please make use of the communication system (headphones and receivers) available for the audience at each lecture forum which will serve you as audio support in a noise loaded area. A simultaneous interpretation will be not be given for KONTEC DIRECT Short technical lectures.

Thursday, March 23.03.2017, 11.20 am – 12.30 pm Panel 1 - Session 4 11.20 am

(Paper number 039) – Poster box 48 Carbon-14 release from irradiated stainless steel Eva De Visser-Týnová, NRG Petten 10 minutes for handover

11.40 am

(Paper number 023) – Poster box 49 Implementation of the –Disposal Committee Guidelines at VKTA – Strahlenschutz, Analytik & Entsorgung Rossendorf e. V. Sabine Fleck, VKTA Dresden 10 minutes for handover

12.00/ noon

(Paper number 031) – Poster box 50 Status of waste producer-specific material vectors in the Konrad material list Dr. Karl Weis, Bundesamt für Strahlenschutz 10 minutes for handover

12.20 pm

(Paper number 082) – Poster box 51 Legitimation of on-site Disposal as an Option for Decommissioning of «NUCLEAR LEGACY» Objects Andrei Sobolev, Federal Enterprise for Radioactive waste management enterprise „RosRAO“

11

Thursday, March 23, 2017, 11.20 am – 12.30 pm Panel 2 - Session 3 (Paper number 011) – Poster box 35 - BMBF Laser decontamination of concrete- and metal surfaces Georg Greifzu, TU Dresden, Fakultät Maschinenwesen, Institut für Energietechnik, Professur für Wasserstoff- und Kernenergietechnik

11.20 am

10 minutes for handover

11.40 am

(Paper number 044) – Poster box 36 Use of land farming for energy plant production on heavy metal/radionuclide contaminated areas Prof. Dr. Erika Kothe, Friedrich-Schiller-Universität Jena 10 minutes for handover

12.00/ noon

(Paper number 021) – Poster box 37 Waste treatment complex at the Nuclear Power Plant TIANWAN, China Rainer Slametschka, NUKEM Technologies Engineering Services GmbH 10 minutes for handover

12.20 pm

(Paper number 105) – Poster box 38 Civil engineering planning in the nuclear dismantling by means of 3D-CAD-Model Mark Kritzmann, HOCHTIEF Engineering GmbH Consult IKS

Thursday, March 23, 2017, 02.00 pm – 02.30 pm Panel 1 - Session 2 02.00 pm

(Paper number 007) – Poster box 22 - BMBF Mechanical and thermal tool loads in dry diamond wire sawing of steel Lukas Tatzig, Leibniz Universität Hannover, Institute of Production Engineering and Machine Tools (IFW)

02.20 pm

(Paper number 061) – Poster box 23 Introduction of various procedures when dismantling biological shields of research reactors Dr.-Ing. Carmen Isabella Krau, Siempelkamp NIS Ingenieurgesellschaft mbH

10 minutes for handover

Thursday, March 23, 2017, 02.00 pm – 02.30 pm Panel 2 - Session 1 02.00 pm

(Paper number 015) – Poster box 1 Utilization of the Reactor Pressure Vessel of a Boiling Water Reactor Dr. Niemma Buckanie, GNS Gesellschaft für Nuklear-Service mbH 10 minutes for handover

02.20 pm

(Paper number 013) – Poster box 2 Release measurement of radioactive contaminated soil and debris Dr. Marina Sokcic-Kostic, NUKEM Technologies Engineering Services GmbH

Thursday, March 23, 2017, 03.40 pm – 04.10 pm Panel 1 - Session 2 03.40 pm

(Paper number 076) – Poster box 24 Dismantling of chemical cells – disassembly of a concrete shield using a dry rope-saw technique Sonja Biermann, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH 10 minutes for handover

12

04.00 pm

(Paper number 095) - Poster box 25 Demolition of the Biological Shield at the SVAFO R2 Research Reactor in Sweden Niklas Bergh, Westinghouse Electric Sweden AB

Thursday, March 23, 2017, 03.40 pm – 04.10 pm Panel 2 - Session 1 03.40 pm

(Paper number 036) - Poster box 3 „Islands of Release“ when dismantling the Rossendorf Research Reactor Sven Jansen, VKTA Dresden 10 minutes for handover

04.00 pm

(Paper number 063) – Poster box 4 Experience from Dismantling, Decontamination and Release of Thick-Walled Casks and Containers Philipp Diekmann, GNS Gesellschaft für Nuklear-Service mbH

Postersession 09.30 am 06.00 pm

Postersession of all Sessions at the gallerires of ICD halls 1-5, restaurant and hall foyer

Technical Exhibition 09.30 am 06.00 pm

08.00 pm

Accompanying Technical Exhibition in the ICD halls 1-5, restaurant and hall foyer

Special evening event „KONTEC 2017 Banquet“ in the ICD

Friday, March 24, 2017 Session 4: Transport, interim and final storage of non-heat generating wastes Plenary Session Session Chairpersons

Karin Kugel, Bundesamt für Strahlenschutz BfS Olaf Oldiges, DAHER NUCLEAR TECHNOLOGIES GmbH

09.00 am

(Paper number 024) Quality assurance of the data management for the Waste Flow Tracking and Product Control System AVK Erik Kisant, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH M. Beylebens, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH Dr. Thorsten Steinhardt, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH Dr. Guido Caspary, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH et. al.

09.20 am

(Paper number 005) Platform KONRAD repository – The IT-tool for the call-off order logistic Dr. Martin Imhäuser, GNS Gesellschaft für Nuklear-Service mbH

13

09.40 am

(Paper number 066) Status of Preparation for Repository Konrad at the Public Sector – Report of Konrad Coordination Unit Iris Graffunder, EWN Entsorgungswerk für Nuklearanlagen GmbH, Betriebsstätte Karlsruhe Carola Dominke-Bendix, EWN Entsorgungswerk für Nuklearanlagen GmbH, Betriebsstätte Karlsruhe Dr. Anton-Philipp Anthofer, EWN Entsorgungswerk für Nuklearanlagen GmbH, Betriebsstätte Karlsruhe

10.00 am

(Paper number 086) Challenges and optimizing options for the qualification of casks for the Konrad repository Dr.-Ing. Eva Maria Kasparek, BAM Bundesanstalt für Materialforschung und -prüfung Matthias Dittrich, BAM Bundesanstalt für Materialforschung und –prüfung Dr. Holger Völzke, BAM Bundesanstalt für Materialforschung und -prüfung

10.20 am

(Paper number 089) Requirements for the use of elastomer seals in casks for final disposal of low and intermediate level waste Dr.-Ing. Matthias Jaunich, BAM Bundesanstalt für Materialforschung und -prüfung Peter Hagenow, BAM Bundesanstalt für Materialforschung und –prüfung Dr.-Ing. Eva-Maria Kasparek, BAM Bundesanstalt für Materialforschung und –prüfung Anja Kömmling, BAM Bundesanstalt für Materialforschung und –prüfung et. al.

10.40 am

Coffee break

Session 4: Transport, interim and final storage of non-heat generating wastes (Continuation) Plenary Session Session Chairpersons

Karin Kugel, Bundesamt für Strahlenschutz BfS Dr. Hannes Wimmer, GNS Gesellschaft für Nuklear-Service mbH

11.10 am

(Paper number 020) Shielding optimization of a Type IP-2 package for low and intermediate level waste considering IAEA transport regulations Dr. Luc Schlömer, WTI Wissenschaftlich-Technische Ingenieurberatung GmbH Olaf Ringleb, WTI Wissenschaftlich-Technische Ingenieurberatung GmbH Dr. Michael Nekipelov, WTI Wissenschaftlich-Technische Ingenieurberatung GmbH Dr. Sven Tittelbach, WTI Wissenschaftlich-Technische Ingenieurberatung GmbH

11.30 am

(Paper number 046) Disposal of core-components: Assessment of the optimized packing strategy based on validated computational algorithms Dr. Daniel Schaper, TÜV NORD EnSys GmbH & Co. KG Dr. Helmut Stoffers, TÜV NORD EnSys GmbH & Co. KG Dr. Hilke Hattermann, TÜV NORD EnSys GmbH & Co. KG Dr. Ralf Ohlhof, TÜV NORD EnSys GmbH & Co. KG

11.50 am

(Paper number 079)

14

Retrieval of the radioactive wastes from the mine Asse II – status of concept design of the 750m-level Dr. Jens-Uwe Schmollack, TÜV Rheinland Industrie Service GmbH Dirk Laske, Bundesamt für Strahlenschutz Dr. Thomas Lohser, Bundesamt für Strahlenschutz 12.10 pm

(Paper number 073) Safety assessment for management and disposal of radioactive waste at „Vektor Complex“ in the Chernobyl Exclusion Zone Dr. Stefan Thierfeldt, Brenk Systemplanung GmbH Dr. Olaf Nitzsche, Brenk Systemplanung GmbH Kirsten Haneke, Brenk Systemplanung GmbH Dr. Yevgeniy Shapiro, Brenk Systemplanung GmbH

12.30 pm

Conference conclusion and Awards for the Best 2017 Plenary, Poster and KONTEC DIRECT Short technical lecture Michael Szukala, Chairman of KONTEC Program Committee

01.00 pm

End of Plenary Sessions

Postersession 09.00 am 01.00 pm

Postersession of all Sessions at the gallerires of ICD halls 1-5, restaurant and hall foyer

Technical Exhibition 09.00 am 01.00 pm

Accompanying Technical Exhibition in the ICD halls 1-5, restaurant and hall foyer

01.00 pm

End of the Conference

Postersessions Sessions 1-4 at the galleries of ICD halls 1-5, restaurant and hall foyer March 22, 2017 10.00 am – 06.00 pm March 23, 2017 09.30 am – 06.00 pm March 24,,2017 09.00 am – 01.00 pm

Session 1 Box 1:

(Paper number 015) (also as KONTEC DIRECT short lecture) Utilization of the Reactor Pressure Vessel of a Boiling Water Reactor Dr. Niemma Buckanie, GNS Gesellschaft für Nuklear-Service mbH Boris Westerwinter, GNS Gesellschaft für Nuklear-Service mbH

Box 2:

(Paper number 013) (also as KONTEC DIRECT short lecture) Release measurement of radioactive contaminated soil and debris Dr. Marina Sokcic-Kostic, NUKEM Technologies Engineering Services GmbH Felix O. Langer, NUKEM Technologies Engineering Services GmbH Ch. Klein, NUKEM Technologies Engineering Services GmbH

15

Roland Schultheis, NUKEM Technologies Engineering Services GmbH Box 3:

(Paper number 036) (also as KONTEC DIRECT short lecture) „Islands of Release“ when dismantling the Rossendorf Research Reactor Sven Jansen, VKTA Dresden Frank Michael, VKTA Dresden Benjamin Johne, VKTA Dresden

Box 4:

(Paper number 063) (also as KONTEC DIRECT short lecture) Experience from Dismantling, Decontamination and Release of Thick-Walled Casks and Containers Philipp Diekmann, GNS Gesellschaft für Nuklear-Service mbH Andre Henning, GNS Gesellschaft für Nuklear-Service mbH Falko Baecker, sat. Kerntechnik GmbH

Box 5:

(Paper number 017) Calculation of activation and validation for control rods from light water reactors as a basis for final disposal Jennifer Rose, WTI Wissenschaftlich-Technische Ingenieurberatung GmbH T. Mispagel, WTI Wissenschaftlich-Technische Ingenieurberatung GmbH Jörg Radzuweit, GNS Gesellschaft für Nuklear-Service mbH Andreas Friske, GNS Gesellschaft für Nuklear-Service mbH

Box 6:

(Paper number 018) Enhancements based on validated activation calculations - ActiAtlas Dr. Luc Schlömer, WTI Wissenschaftlich-Technische Ingenieurberatung GmbH Prof. Dr. P.-W. Phlippen, WTI Wissenschaftlich-Technische Ingenieurberatung GmbH

Box 7:

(Paper number 019) Dispersion calculations with the Gaussian plume model and a Lagrangian particle dispersion model for discharges of radioactive substances into the air André Indenhuck, WTI Wissenschaftlich-Technische Ingenieurberatung GmbH Dominik Amian, WTI Wissenschaftlich-Technische Ingenieurberatung GmbH Dr. Vera Derya, WTI Wissenschaftlich-Technische Ingenieurberatung GmbH Dr. Oliver Wallenfang, GNS Gesellschaft für Nuklear-Service mbH

Box 8:

(Paper number 030) Removal of Uranium from Soil Washing Solution Jongwon Choi, Korea Atomic Energy Research Institute, Decontamination and Decommissioning Technology Div. Seung-Soo Kim, Korea Atomic Energy Research Institute, Decontamination and Decommissioning Technology Div. Gyu-Seong Han, Korea Atomic Energy Research Institute, Decontamination and Decommissioning Technology Div.

Box 9:

(Paper number 032) Repository-compatible conditioning of radioactive components from a research reactor Pascal Budriks, GNS Gesellschaft für Nuklear-Service mbH

Box 10:

(Paper number 033) Landfilling options for released wastes – using the example of castings – Jessica Ambos, sat. Kerntechnik GmbH

Box 11:

(Paper number 034) Radiological characterization of decommissioning waste

16

Tanja Tomasberger, Research and Innovation, Nuclear Research and consultancy Group (NRG) Eva de Visser-Týnová, Research and Innovation, Nuclear Research and consultancy Group (NRG) Frits Moet, Research and Innovation, Nuclear Research and consultancy Group (NRG) Jan Kok, Research and Innovation, Nuclear Research and consultancy Group (NRG) et. al. Box 12:

(Paper number 035) Disposal of released residuals after dismantling of the Rossendorf Research Reactor (RFR) Ricarda Langer, VKTA Dresden Dr. Petra Steinbach, VKTA Dresden Frank Michael, VKTA Dresden

Box 13:

(Paper number 040) Bridging the Gap: Residue Tracking for Decommissioning with RVR Dr. Thorsten Schliephake, GNS Gesellschaft für Nuklear-Service mbH

Box 14:

(Paper number 054) Quantitative determination of Ni-63 wipe tests by liquid scintillation analysis (LSA) Sarah Wolf, Zentralstelle für radioaktiven Abfall (ZRA), Helmholtz-Zentrum Berlin für Materialien und Energie GmbH

Box 15:

(Paper number 060) Next Generation Dynamic Contamination Monitoring based on the FastTrack Technology Dr. Tobias Baer, Mirion Technologies GmbH Christian Günther, Mirion Technologies GmbH

Box 16:

(Paper number 067) Conditioning of the ANTARES-Shutter assembling from FRM II suitable packaged for the Repository Konrad Lutz Karbstein, EWN Entsorgungswerk für Nuklearanlagen GmbH, Betriebsstätte Karlsruhe Dr. Anton Philipp Anthofer, EWN Entsorgungswerk für Nuklearanlagen GmbH, Betriebsstätte Karlsruhe Ralf Borchardt, EWN Entsorgungswerk für Nuklearanlagen GmbH Dr. Herbert Reithmeier, TU München

Box 17:

(Paper number 077) Radiological characterization of radioactive waste produced at CERN Dr. Matteo Magistris, CERN European Organization for Nuclear Research Luca Bruno, CERN European Organization for Nuclear Research Dr. Luisa Ulrici, CERN European Organization for Nuclear Research Biagio Zaffora, CNAM, Conservatoire National des Arts et Métiers et.al.

Box 18:

(Paper number 093) Negligibly contaminated waste from decommissioning and demolishing of nuclear facilitites in Germany considering later waste management Dr.-Ing. Gerd Bruhn, Gesellschaft für Anlagen- und Reaktorsicherheit (GRS) gGmbH Dr. Andreas Artmann, Gesellschaft für Anlagen- und Reaktorsicherheit (GRS) gGmbH

Box 19:

(Paper number 100) Strategic aspects on Waste Management in Decommissioning Niklas Bergh, Westinghouse Electric Sweden AB Thom Rannemalm, OKG Oskarshamn Nuclear Power Plant

17

Sofia Eliasson, OKG Oskarshamn Nuclear Power Plant Gunnar Hedin, Westinghouse Electric Sweden AB et.al. Box 20:

(Paper number 101) HZ 6 - complete renewal of a Hot Cell at PSI Dr. Frank Scheuermann, NUKEM Technologies Engineering Services GmbH T. Krudwig, NUKEM Technologies Engineering Services GmbH D. Kuster, Paul-Scherrer Institut

Box 21:

(Paper number 102) - BMBF PROcess of radioactive MErcury Treatment under EU Safety-standards PROMETEUS Dr. John Kettler, Aachen Institute for Nuclear Training (AiNT) GmbH Dr. Andreas Havenith, Aachen Institute for Nuclear Training (AiNT) GmbH Marius Hirsch, Aachen Institute for Nuclear Training (AiNT) GmbH Larissa Klaß, Forschungszentrum Jülich GmbH, IEK-6 et.al.

Session 2 Box 22:

(Paper number 007) - BMBF (also as KONTEC DIRECT short lecture) Mechanical and thermal tool loads in dry diamond wire sawing of steel Lukas Tatzig, Leibniz Universität Hannover, Institute of Production Engineering and Machine Tools (IFW) Prof. Dr.-Ing. Berend Denkena, Leibniz Universität Hannover, Institute of Production Engineering and Machine Tools (IFW) Dr.-Ing. Thilo Grove, Leibniz Universität Hannover, Institute of Production Engineering and Machine Tools (IFW)

Box 23:

(Paper number 061) (also as KONTEC DIRECT short lecture) Introduction of various procedures when dismantling biological shields of research reactors Dr.-Ing. Carmen Isabella Krau, Siempelkamp NIS Ingenieurgesellschaft mbH Wolfgang-Bruno Huber, Siempelkamp NIS Ingenieurgesellschaft mbH

Box 24:

(Paper number 076) (also as KONTEC DIRECT short lecture) Dismantling of chemcial cells – disassembly of a concrete shield using a dry ropesaw technique Sonja Biermann, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH E. Pohl, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH Doris Bensch, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH P. Pracht, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH et.al.

Box 25:

(Paper number 095) (also as KONTEC DIRECT short lecture) Demolition of the Biological Shield at the SVAFO R2 Research Reactor in Sweden Niklas Bergh, Westinghouse Electric Sweden AB Kjell Westerberg, AB SVAFO Ylva-Li Lindh, Westinghouse Electric Sweden AB

Box 26:

(Paper number 006) Remote Decontamination of the Storage Vessels in Building 105X and 122X at the BELGOPROCESS Site

18

Bart Eerdekens, Belgoprocess Pierre van der Heyden, ONDRAF Marnix Braekeveldt, ONDRAF Willem Notelteirs, Belgoprocess et. al. Box 27:

(Paper number 028) Testing the remote controlled dismantling of the VEK-melter on PVA mock-up Dr. Marco Klipfel, Kerntechnische Entsorgung Karlsruhe GmbH Thomas Eberhard, Kerntechnische Entsorgung Karlsruhe GmbH Christian Held, Kerntechnische Entsorgung Karlsruhe GmbH

Box 28:

(Paper number 038) The dismantling of the KNK containment as well as the disposal and the clearance according to § 29 StrlSchV Sina Hunzinger, Kerntechnische Entsorgung Karlsruhe GmbH Oliver Fath, Kerntechnische Entsorgung Karlsruhe GmbH

Box 29:

(Paper number 042) Expertise preservation against the background of the upcoming decommissioning and disposal projects – Knowledge management at the TÜV NORD group Holger Tobergte, TÜV NORD EnSys GmbH & Co. KG

Box 30:

(Paper number 055) Development of the Licensing Procedure of Decommissioning for the Spent Fuel Storage facility in Korea Dae sik Yook, Korea Institute of Nuclear Safety (KINS) Ho Jin Lee, Korea Institute of Nuclear Safety (KINS) Dongkeuk Park, Korea Institute of Nuclear Safety (KINS)

Box 31:

(Paper number 058) A new criticality safety optimization method for nuclear power plant spent fuel pool defuelling and decommissioning Dr. Imrich Fabry, Siempelkamp NIS Ingenieurgesellschaft mbH Manfred Schwarz, Siempelkamp NIS Ingenieurgesellschaft mbH

Box 32:

(Paper number 068) Experiences with the demolition of the vent stack of the Nuclear Power Plant Greifswald’s Factory I Ralf Borchardt, EWN Entsorgungswerk für Nuklearanlagen GmbH Ronald Zimmer, EWN Entsorgungswerk für Nuklearanlagen GmbH Beate Linde, EWN Entsorgungswerk für Nuklearanlagen GmbH

Box 33:

(Paper number 074) The last insertion – Removal and segmentation of the „Cold“ Neutron Source SV 5 of the Research Reactor FRJ-2 (DIDO) Stephan Werbelow, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH Wilhelm Dohmen, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH Burkhard Stahn, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH Rudolf-Josef Printz, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH et.al.

Box 34:

(Paper number 075) Dismantling of the TEXTOR at the Research Centre, Jülich Robert Graupe, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH Doris Bensch, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH P. Pracht, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH E. Pohl, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH et.al.

19

Session 3 Box 35:

(Paper number 011) - BMBF (also as KONTEC DIRECT short lecture) Laser decontamination of concrete- and metal surfaces Georg Greifzu, TU Dresden, Fakultät Maschinenwesen, Institut für Energietechnik, Professur für Wasserstoff- und Kernenergietechnik Prof Dr.-Ing. habil. Antonio Hurtado, TU Dresden, Fakultät Maschinenwesen, Institut für Energietechnik, Professur für Wasserstoff- und Kernenergietechnik Dr. Anton Philipp, EWN Entsorgungswerk für Nuklearanlagen GmbH Dr. Wolfgang Lippmann, TU Dresden, Fakultät Maschinenwesen, Institut für Energietechnik, Professur für Wasserstoff- und Kernenergietechnik et.al.

Box 36:

(Paper number 044) (also as KONTEC DIRECT short lecture) USER: Use of land farming for energy plant metal/radionuclide contaminated areas Prof. Dr. Erika Kothe, Friedrich-Schiller-Universität Jena Sabestian Pietschmann, Friedrich-Schiller-Universität Jena David Fürst, Friedrich-Schiller-Universität Jena

production

on

heavy

Box 37:

(Paper number 021) (also as KONTEC DIRECT short lecture) Waste treatment complex at the Nuclear Power Plant TIANWAN, China Rainer Slametschka, NUKEM Technologies Engineering Services GmbH

Box 38:

(Paper number 105) (also as KONTEC DIRECT short lecture) Civil engineering planning in the nuclear dismantling by means of 3D-CAD-Model Mark Kritzmann, HOCHTIEF Engineering GmbH Consult IKS Frank Schulze, HOCHTIEF Engineering GmbH Rüdiger Holtkamp, HOCHTIEF Engineering GmbH Dr. Julian Meyer, HOCHTIEF Engineering GmbH

Box 39:

(Paper number 009) Virtual Reality Applications in Decommissioning Planning and Training Prof. Dr. Ulrich W. Scherer, Hochschule Mannheim, Kompetenzzentrum Virtual Reality Rhein-Neckar

Box 40:

(Paper number 014) - BMBF Optimization of Metal Recycling During D&D of Nuclear Power Plants Dr. Frank Charlier, RWTH Aachen University, NET - Nukleare Entsorgung und Techniktransfer Jan Philipp Dabruck, RWTH Aachen University, NET - Nukleare Entsorgung und Techniktransfer

Box 41:

(Paper number 026) Virtual Reality Training (VRT) – Safety in Dismantling of Nuclear Facilities by Virtual Training Timo Liedtke, Kerntechnische Entsorgung Karlsruhe GmbH Wolfgang Metzger, Kerntechnische Entsorgung Karlsruhe GmbH Christian Held, Kerntechnische Entsorgung Karlsruhe GmbH

Box 42:

(Paper number 043) Reconstruction of the MAW-scrapping facility of the Main Department Decontamination Workshops (Hauptabteilung Dekontaminationsbetriebe) Frank Blase, Kerntechnische Entsorgung Karlsruhe GmbH

20

Ronny Kern, Kerntechnische Entsorgung Karlsruhe GmbH Box 43:

(Paper number 056) - BMBF Combining bioremediation methods with bioenergy production at field scale Daniel Mirgorodsky, Friedrich-Schiller-Universität Jena, Institut für Geowissenschaften A. Märten, Friedrich-Schiller-Universität Jena, Institut für Geowissenschaften M. Riefenstahl, Friedrich-Schiller-Universität Jena, Institut für Geowissenschaften Dr. Dirk Merten, Friedrich-Schiller-Universität Jena, Institut für Geowissenschaften et.al.

Box 44:

(Paper number 065) Process qualification for the drying of evaporator concentrates in the In-drumdrying-facility of the Nuclear Power Plant Greifswald (KGR) Stephan Peter Kate, EWN Entsorgungswerk für Nuklearanlagen GmbH Klaus Borchardt, EWN Entsorgungswerk für Nuklearanlagen GmbH Roy Helzel, EWN Entsorgungswerk für Nuklearanlagen GmbH Dr. Cornelia Rittmeyer, EWN Entsorgungswerk für Nuklearanlagen GmbH

Box 45:

(Paper number 084) Decommissioning as a Stimulus for Renewing of «Traditional» Technology for NPPs Liquid Waste Treatment Andrei Sobolev, Federal Enterprise for Radioactive waste management “RosRAO” A. S. Chugunov, Federal Enterprise for Radioactive waste management “RosRAO” A. F. Nechaev, Federal Enterprise for Radioactive waste management “RosRAO” V. A. Vinnitskiy, Federal Enterprise for Radioactive waste management “RosRAO”

Box 46:

(Paper number 090) Mobile Supercompactor in the operation and dismantling of nuclear plants Anton Kastner, Westinghouse Electric Germany GmbH Jens Horlemann, Westinghouse Electric Germany GmbH

Box 47:

(Paper number 098) Safe transport of containers with low radioactive material using an automated transport system Jan Lederer, IEM Fördertechnik GmbH

Session 4 Box 48:

(Paper number 039) (also as KONTEC DIRECT short lecture) Carbon-14 release from irradiated stainless steel Eva De Visser-Týnová, Research and Innovation, Nuclear Research and consultancy Group (NRG) Marcel P. Stijkel, Research and Innovation, Nuclear Research and consultancy Group (NRG) Stephen W. Swanton, AMEC Foster Wheeler Stephen J. Williams, Radioactive Waste Management et.al.

Box 49:

(Paper number 023) (also as KONTEC DIRECT short lecture) Implementation of the Disposal Committee Guidelines at VKTA – Strahlenschutz, Analytik & Entsorgung Rossendorf e. V. Sabine Fleck, VKTA Dresden Gregor Beger, VKTA Dresden Christel Herzog, VKTA Dresden

21

Box 50:

(Paper number 031) (also as KONTEC DIRECT short lecture) Status of waste producer-specific material vectors in the Konrad material list Dr. Karl Weis, Bundesamt für Strahlenschutz Karin Kugel, Bundesamt für Strahlenschutz Wilma Boetsch, TÜV Rheinland ISTec GmbH Claudia Haider, TÜV Rheinland ISTec GmbH et.al.

Box 51:

(Paper number 082) (also as KONTEC DIRECT short lecture) Legitimation of On-Site Disposal as an Option for Decommissioning of «NUCLEAR LEGACY» Objects Andrei Sobolev, Federal Enterprise for Radioactive waste management “RosRAO” A. F. Nechaev, St. Petersburg Institute of Technology I. V. Smirnov, V.G. Khlopin Radium Institute

Box 52:

(Paper number 025) Synthesis and Leaching of cement-based Drum-Dryer Product Pellets in a Laboratory Scale Dr. Henrik Daniels, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH Hannah Wortmann, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH Dr. Thorsten Steinhardt, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH Dr. Guido Caspary, JEN Jülicher Entsorgungsgesellschaft für Nuklearanlagen mbH et.al.

Box 53:

(Paper number 041) - BMBF Identification and quantification of beta emitters characterization of radioactive waste packages Marek Blaszczynski, TU München, Radiochemie München RCM Dr. Thomas Bücherl, TU München, Radiochemie München RCM

for

nondestructive

Box 54:

(Paper number 080) Radiation protection at the mine Asse II – from the mining law to the nuclear law Dr. Florian Voigts, Bundesamt für Strahlenschutz Dr. Volker Kunze, Bundesamt für Strahlenschutz

Box 55:

(Paper number 087) Centralized Data Processing Landscape for Nuclear Residual Materials and Waste Dr. Andrea Eckelhoff, GNS Gesellschaft für Nuklear-Service mbH Friedrich Bauriedel, GNS Gesellschaft für Nuklear-Service mbH Dr. Thorsten Schliephake, GNS Gesellschaft für Nuklear-Service mbH

Box 56:

(Paper number 088) Forged steel as a new container material for final storage of low- and medium-level radioactive waste in the KONRAD repository Mathias Hoffmann, BAM Bundesanstalt für Materialforschung und -prüfung Dr. Eva-Maria Kasparek, BAM Bundesanstalt für Materialforschung und –prüfung Dr. Holger Völzke, BAM Bundesanstalt für Materialforschung und -prüfung

Box 57:

(Paper number 107) - BMBF Treatment of liquid C-14-containing wastes by means of electrochemical incineration Hans-Jürgen Friedrich, Fraunhofer-Institut für Keramische Technologien und Systeme IKTS

22