Weatherproof Tournament Table Tennis Table SVEN® Champion Owner’s Manual Model Number 7043-190

Printed on 100% recycled paper!

oof r p r e h Weat y l e t u Absol

Made in Germany

Thank you for purchasing our high quality KETTLER product. If you have any questions or concerns regarding this product, please contact us: KETTLER International, Inc. Parts & Service Department P.O.Box 2747 Virginia Beach, Virginia 23450 USA

E-mail [email protected] Tel: 757-427-2400 ext. 26 Fax: 757-563-9273

Please have this owner’s manual with you when you call. DO NOT CONTACT YOUR RETAILER.

Assembly Instructions Before assembling or using the table-tennis table, please read the following instructions carefully. They contain important information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a safe place for maintenance purposes or for ordering spare parts. All KETTLER products are designed in accordance with the latest safety regulations and undergo a constant process of quality control during manufacturing. The knowledge in this process is used to constantly improve and develop our products. In order to offer our customers the very best in product quality, we reserve the right to make technical changes at any time. Should you have any cause for complaint, please contact KETTLER at: KETTLER International, Inc. P.O.Box 2747 Virginia Beach, Virginia 23450 USA Tel: 757-427-2400 ext. 26 Fax: 757-563-9273 E-mail [email protected]

Note on Safety ■ The table tennis table should be used only for its intended pur-

pose, i.e. for playing with suitable table tennis paddles and balls. ■ All other uses are prohibited and may be dangerous. The manufacturer cannot be held liable for damage or injury caused by improper use of the table. ■ Damaged or worn components may endanger your safety or shorten the lifespan of the table tennis table. Replace worn or damaged components immediately and remove the table from use until this has been done. Use only spare parts manufactured by KETTLER. ■ The table tennis table complies with all safety regulations. Incorrect repairs, alterations to the design (removal of original parts, addition of other components etc.) may endanger the safety of the user.

■ Instruct other persons (in particularly children) using the table in

its correct use, and draw their attention to any potential source of danger, especially folding or closing the table. ■ When setting up or dismantling the table, stay clear of its folding radius. ■ When folded up, the table tennis table presents a large surface to the wind. For this reason, ensure that it is stored in a sheltered position. ■ The unit complies with the standard DIN 7898-1/10.97. ■ Depending on frequency of use, check all screws, bolts etc. regularly to ensure that they are in good condition.

Handling the equipment ■ Do not use the table tennis table until it has been fully and cor-

rectly assembled and checked. ■ Set the table up on a level surface. ■ For practising without a partner, the table halves can be folded up singly.

■ Do not use corrosive or abrasive materials to clean the equip-

ment. Ensure that such materials are not allowed to pollute the environment. In most cases, a slightly dampened cloth is sufficient.

Limited One-Year Warranty (Residential use) Manufacturer warrants to the original retail purchaser, this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. Should this product become defective due to material or workmanship within the warranty period, contact our Customer Service Department for repair or replacement at our opinion. This warranty is not transferable and does not cover normal wear and tear, bowing of the table or damage caused by improper handling, installation or use of this product. This warranty is also void if product is in

2

any way abused, damaged, or modified from its original state, or if used for other than residential use. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. If table does not seem level, it is probably because floor is not level. Move table several inches (set table in playing position) in different directions to find the best location for the table. If the floor is extremely unleveled, table may not play or operate properly. If table is high in the center, shim up under the outer legs.

Instructions for Assembly ■ Carefully read these assembly instructions before beginning

with the work itself. The individual steps are additionally explained in the sequence by means of symbols, in some cases a text mark indicates that a written explanation is available. Strictly follow the individual mounting steps to ensure a safe use and operation of the unit. ■ To ensure that the table-tennis table is properly assembled and can be safely used, observe the instructions for assembly exactly. ■ Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine. ■ Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!

■

■

■ ■

The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as instructed. The required tools are supplied with the equipment. Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of tubing plugs). Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.

Checklist (contents of packaging)

2x

2x 1x 2x 2x 4x 4x

1x 2x 2x

2x

2x

3x

4x M8x110

6x M8x45

6x M6x37

6x M6

16x ø12

8x

4x

4x M6x60

4x M8

4x M6

20x ø16

2x ø20

6x

4x M6x35

2x M8

2x

12x ø25

4x

4x

2x M8x120

1x

2x

You also need the following tools (Not included):

2x

SW13

SW10

2x

2x

2x

2x

1x

3

1

! ACTU

AL S

IZE

4x

4x

4

4x

!

2 18,6cm

A

D A

A

ø25

C

2x

ACTU

AL S

IZE

B

2x

B

ACTU

AL S

IZE 2x

C

ACTU

AL S

2x

2x

IZE 2x

8x

2x

5

3

C ACTU

AL S

IZE 2x

4

2x

ACTU

AL S

IZE

2x

6

8x

2x

Ensure that it cannot slip or tilt over.

5 To do this, the braces for the frame must be bent slightly to the side. Proceed with care when doing this.

2x

ACTU

AL S

IZE

4x

6

2x

ACTU

AL S

IZE

2x

4x

2x

7

7

A

B

B

A

ACTU

AL S

IZE 1x

1x

B

ACTU 2x

8

4x

1x

2x

2x

AL S

IZE

8

9 Carry out steps 5–8 for the second half of the table. Again, ensure that the table cannot slip or tilt over!

10

CLICK!

CLICK!

4x

9

1 Handling Folding the table halves down: press the left-hand tip lock. Hold the table firmly with one hand, press the right-hand lock and lower the table-half slowly into position. Never allow it to drop down!

C

A B

2 Folding the table halves up: press the locking lever up and lift the table half upwards. Continue to press the lever during the first part of the upward motion.

B

A

10

3

4 C D E F

A Adjustment knob; pull knob off net post and select desired thickness (i.e. 19mm) B Slide the netposts between the table halves.

C Slide the tension pin through net D Place pin in designated slots E Tie tension string to plastic tension tab. F Place tension string in slots over tension pin and net post. Adjust net tension by adjusting plastic tension tab.

19mm Wood 22mm Aluminium

A

B

Spare parts list Item

1 2 3 4 5 6 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Description

Pieces

TT-Platte (BITTE UNBEDINGT ARTIKEL-NUMMER DES TT-TISCHES ANGEBEN!) Fussbügel/-gestell mit Bodenschonern Bodenschoner Stützbügel (kpl. mit Rohrverbindern, Sicherungen und Bundschrauben M6x30mm) Sicherungshebel 1 Sicherungshebel 2 Lagerböckchen Schubstange mit Rohrverbinder Schubstange (kpl. mit Sicherung, Bundschraube M6x30mm und Rohrverbindern) Verbindungsstange Grundbügel (714mm) Radhalter Grundbügel (890mm) mit Stopfen für VKT 25mm Abweisstange Seitenverkleidung Räder-Satz (4 Stück) mit Radverbinder Radverbinder Handdruckplatte Bundschraube M6x37mm (o.Abb.) Rechteckmutter M6 Stopfen für VKT 25mm 6kant-Schraube M8x120mm (o.Abb.) 6kant-Schraube M8x110mm (o.Abb.) Distanzrohr ø12x1,8x64mm Spreizniet ø6x9,5 Schraubenbeutel Netzhalter Netz Schläger-/Ballhalterung (o.Abb.) Spannlasche Klemme zu Schläger-/Ballhalterung (o.Abb.)

2 2 4 2 4 2 8 2 2 3 1 2 1 2 2 2 2 6 6 4 2 2 4 2 4 1 2 1 1 2 2

Part No. for 7043-190 (weatherproof) 94130003 94110769 70130540 94110771 94110762 94110763 10128024 94110758 94110755 94110764 94110765 70130811 94110767 70130602 70130817 94180177 70130812 70130530 10201209 10301000 10100046 10206115 10206081 97201453 10418503 94180178 10128022 73301010 70130561 10128002 70130567

Ordering spare parts When ordering spare parts, always state the full product number, spare-part number, the quantity required and the control number stamped on the back. Example order: Product No. 7043-190 / spare-part no. 10100046 / 2 pieces / inspection no...... Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this should be clearly stated on the order by adding the words „with fastening material“. For parts, please contact us at: KETTLER International, Inc. P.O.Box 2747 Virginia Beach, VA 23450-2747 USA

E-mail [email protected] Tel: 757-427-2400 ext. 26 Fax: 757-563-9273 11

Spare parts drawing

10 1

2

21

11

5

10

12

3 4 6

21 17

14

5 23

13

20 27 19

In case of complaint, please state this control number.

31 32

16

18

33

24

28

30

19

docu 934a/10.02

15