ABOUT FINER TIMBER DOORS Finer Timber Doors is an Australian family business, which has been manufacturing quality cabinet doors and bench tops for the kitchen industry since 1994. Through unique craftsmanship, we produce quality specialty joinery, providing flexibility for personal taste and front doors that can create the ultimate first impression. With experienced staff and stateof-the-art machinery, we endeavour to manufacture and complete our products with exceptional standard and lasting quality. We strive to provide lasting value through our high standards in production and provide the care and detail to meet your requirements. At Finer Timber Doors, we do our best to always provide a courteous and prompt service.
“We aim to provide innovative, unique and stylish doors…”
FINER TIMBER DOORS GUARANTEE Finer Timber Doors is an all Australian manufacturer, producing all our products on site. The company guarantees its cabinet doors against defects by design, workmanship and/or the use of faulty raw materials (fair wear and tear excluded). Colour and grain variations occur naturally in timber and are not considered a defect. All timbers are colour matched by hand to achieve a consistent result. Structural failure due to excessive alteration or abuse is not covered by warranty. The guarantee
does not extend in any way to workmanship or damage that has occurred during the handling and delivery. All doors and tops are checked before leaving our premises. Finer Timber Doors agrees to repair or replace at its discretion, unfinished doors found to be defective within the meaning of this warranty and is limited to the purchase price of the originally supplied doors.
SOLID TIMBER DOOR PROFILES ~ SOLID BEAUTY RANGE The very traditional range of solid timber doors. All doors are supplied raw unless specified to be polished.
Tas Oak FTD1
Blackwood FTD1
American Rock Maple FTD2
Sapele FTD2
American Cherry FTD4
Square/Square Edges
Arch/Pencil Round Edges
Square/Small Edge Mould
Arch/Large Edge Mould
Square/Square Edges
• Internally moulded • Raised solid plaque
• Internally moulded • Raised solid plaque • Half round mould
The timber doors shown are an indication only and do not mean you will receive the exact colour, as timber variation is very common.
• Internally moulded • Solid with a groove in plaque
SOLID TIMBER DOOR PROFILES
American White Ash FTD3
Blackwood NFG FTD3
NFG Messmate FTD14
Tas Oak FTD14
Tas Myrtle FTD16
Square/Small Edge Mould
Arch/Stepped Pencil
Square/Square Edges
Arch/Pencil Round Edges
Square/Square Edges
• Internally moulded • Raised solid plaque • Nuveau mould
• Internally moulded • Raised solid plaque • Country life
• Internal square edged frame • Solid flush panel
The timber doors shown are an indication only and do not mean you will receive the exact colour, as timber variation is very common.
SOLID TIMBER DOOR PROFILES
Blackwood FTD18
American Walnut FTD19
American Walnut FTD19
Red Gum Select FTD20
Red Gum Select FTD20
Square/Pencil Round Edges
Square/Square Edges
Arch/Square Edges
Square/Square Edges
Arch/Square Edges
• Solid frame with a solid flush insert panel
• Internally moulded • Sharp raised solid plaque • Modern profile • DGI styles & rails or our standard styles & rails • Square or Arch
Note: We do not take any GUARANTEE for any movement that may occur with this particular design of door.
The timber doors shown are an indication only and do not mean you will receive the exact colour, as timber variation is very common.
• Internally moulded • Sharp raised solid plaque • Modern profile
SOLID TIMBER DOOR PROFILES
VENEER TIMBERDOOR DOORPROFILES PROFILES~~MODERN MODERN SIMPLICITY SOLID VENEERPROFILES TIMBER SIMPLICITY Sleek and Stylish range of timber veneer doors. All doors are supplied RAW unless specified to be polished.
Tas Oak FTD21
Tas Oak FTD21
Danta FTD6
Danta FTD6
Jarrah FTD7
Square/Davo Mould - Square Edges
Arch/Square Edges
Square/Square Edges
Arch/Square Edges
Square/Square Edges
• Internally moulded • Raised solid plaque • Similar to FTD 1 plaque (smaller mould) • Davo styles & rails
• Internally moulded with 5.5mm ply plaque
• Internal square edged frame with 5.5mm ply plaque
The timber doors shown are an indication only and do not mean you will receive the exact colour, as timber variation is very common.
VENEER TIMBER DOOR PROFILES
Jarrah FTD7
Tas Myrtle FTD13
Tas Myrtle FTD13
New Guinea Rosewood FTD15
New Guinea Rosewood FTD15
Arch/Square Edges
Square/Square Edges
Arch/Square Edges
Square/Square Edges
Arch/Square Edges
• Internal square edged frame with 5.5mm ply plaque
• Internal large bevel edged frame with 5.5mm ply plaque • Rounded or square edges
The timber doors shown are an indication only and do not mean you will receive the exact colour, as timber variation is very common.
• Internal small bevel edged frame with 5.5mm ply panel
VENEER TIMBER DOOR PROFILES
VENEER WITH BOLECTION MOULD TIMBER DOOR PROFILES ~ VISUALLY INSPIRING The heritage designs provide a complete visual experience. All doors are supplied raw unless specified to be polished.
Silky Oak FTD17
Silky Oak FTD17
Jarrah FTD8
Tas Oak FTD5
Tas Oak FTD22
Square/Square Edges
Arch/Square Edges
Square/Square Edges
Square/Square Edges
Square/Square Edges
• Internal square edged frame with 5.5mm ply panel & 22mm bolection mould
• Internal davo styles & rails edged frame with 5.5mm ply plaque & 22mm bolection mould on face of frame
• Internal square edged frame with 5.5mm ply plaque & farmhouse bolection mould • Top and bottom rails: 85mm • Styles: Standard 63mm
• Internal small pencil round frame with 5.5mm ply plaque
The timber doors shown are an indication only and do not mean you will receive the exact colour, as timber variation is very common.
LINING BOARD TIMBER DOOR PROFILES ~ UNIQUE AND DESIRABLE The country design of doors provide a long lasting impression. All doors are supplied raw unless specified to be polished.
Baltic Pine FTD11
Blackwood FTD9
Blackwood FTD9
Tas Oak FTD10
Western Red Cedar FTD10
Square/Square Edges – Regency
Square/Square Edges – V-Groove
Arch/Square Edges – V-Groove
Square/Square Edges – V-Groove
Arch/Stepped Pencil – Regency
• Internal square edged frame with 22mm bolection mould • Regency or V-Groove
• Internally moulded (small mould) with lining board, Regency or V-Groove
WITH
The timber doors shown are an indication only and do not mean you will receive the exact colour, as timber variation is very common.
• Internally moulded with lining board • Regency or V-Groove
WITH
FRAME ONLY DOORS Available in most profiles.
COLONIAL BAR DOORS
The timber colours shown are an indication only and do not mean you will receive the exact colour, as timber variation is very common, while each piece is unique. Finer Timber Doors provide a wide range of timber species to assist you with your personal requirements. If a timber is not listed, please contact our office for availability and price.
Natural Feature Grade Timbers (NFG) Available:
NFG Messmate
NFG Red Gum Also available:
All timbers are graded in accordance to Australian Standards. A limited amount of interesting natural growth characteristics: gum veins pockets, knots, colour streaks, cracks and grub holes.
• NFG Tasmanian Oak/ Victorian Ash NFG Blackwood
All of our products are available in a variety of timber species and colour ranges. Also available:
Blackwood FTD12
Knotty Pine/ Radiata Pine
American Oak
American Cherry
US White Ash – Cambia
NZ Pine/ Clear Pine
Red Gum Select
Western Red Cedar
Sapele
Tasmanian Oak/ Vic Ash
Danta
Myrtle
American Walnut
Baltic Pine
Jarrah
European Beech
Messmate
Blackwood
New Guinea Rosewood
Makore
American White Ash
• • • • • •
Silky Oak Celery Top Pine Blackbutt Hoop Pine Oregon Rock Maple
Square/Square Edges - Four Section Door • Colonial Bars • Square or Arch: Rebate = 13mm • Available in sections: 4, 6 or 8 • Bolection Mould Doors FTD8, FTD11 and FTD22 will be made as the above Colonial Bar Mould.
The timber doors shown are an indication only and do not mean you will receive the exact colour, as timber variation is very common.
MOULDINGS We offer a range of thickness (20mm, 32mm, 38mm & build-ups) and lamination sizes. Standard and recommended lamination size on most timbers is 90mm. A range of different Edge Profiles are available for our benchtops, please enquire within.
32mm thick (small pencil round top & bottom edges)
Edge Mouldings
Cap Mouldings
A choice of edge moulding to the outside of your doors. Not specified, doors will be finished with square edges.
Two decorative capping mouldings are available.
EM1 Stepped Pencil
EM2 Pencil Round
EM3 Small E/Mould
EM4 Large E/Mould
EM5 Large Chamfer
Square
Skirting Mouldings
CM1 Standard
40mm
48mm
40mm
16
16
32mm thick (small pencil round top & bottom edges
48mm
16
16
16
16
A decorative skirting to finish the room with style. The height is variable.
43mm
Our solid timber benchtops provide a warm feel, while creating an elegant finish. We supply benchtops in a range of timbers suitable for all areas, including kitchens, bathrooms, offices and laundries. All our tops are made at our premises and made to order.
43mm
BENCHTOPS
CM2
Bolection Mouldings
Edge Profile Choices:
38-40mm thick (square edges)
Square
Pencil Round
Standard in doors FTD 8, FTD 5 and FTD 11 is 22mm. Also available on request is the 32mm Tudor Mould. 90˚
180˚
The timber doors shown are an indication only and do not mean you will receive the exact colour, as timber variation is very common.
Stepped Pencil
22mm
32mm
Extra Services
Polishing & Staining
Sanding
Specialty Joinery
Front & Entrance Doors
External & Internal Bi-Fold Units Specialty Timber Windows For more information, please refer to our website.
Factory 1-2/2 Nicole Close, Bayswater North, VIC 3153 T 03 9761 6939 F 03 9761 6949 W www.finertimberdoors.com.au E
[email protected]
