WAT E R P U R I F I C AT I O N S Y S T E M S

www.wenk-labtec.com

Water source in your laboratory

www.hydrolab.pl

www.wenk-labtec.com

www.wenk-labtec.com

ABOUT US

Hydrolab is a company that designs, produces and provides service of water purification systems for laboratory purposes. Hydrolab is a leader on the Polish market in water purification systems production. For 20 years Hydrolab has been introducing and implementing newest technologies of water purification by mechanical filtration, adsorption, iron removal, softening, membrane technologies (reverse osmosis, microfiltration, nanofiltration, ultrafiltration), as well as usage of 185nm and 254nm UV radiation and deionization. In our offer we have more than a hundred models of water purification systems. On the basis of our experience and research, we designed and developed three series of demineralizers: TECHNICAL, HLP and SPRING, as an ideal solution fitting all of the requirements of a modern laboratory in areas of ultrapure water supply. We also made a variety of unique and innovative solutions, that extend our standard offer. These are: BASIC, POLISHING, R, PLUS and industrial systems: SPRING and TECHNICAL.

www.wenk-labtec.com

Demineralizers may be used in analytical laboratories, as well as dental operating rooms, beauty salons, and industries: electronic, food, chemical, pharmaceutical etc. Hydrolab offers complex services of supplying laboratories with the highest quality water, giving advices in matters of a demineralized water supply - providing support from planning to installation (with a full IQ, OQ, PQ documentation). The company has implemented the PN-EN ISO 9001:2009 quality management certificate in areas of design, production and service of water purification systems, which guarantees a high quality of our products and services.

www.wenk-labtec.com

5

WATER

Clean water is the most important chemical reagent in a laboratory. Hydrolab offers systems producing water fitting the parameters of every water purity class, specified in PN-EN ISO 3696:1999, ASTM, CLSI, FP IX standards. Ater quality in a modern laboratory, depending of a usage purpose, should remain unchanged and proper, and its parameters (for example conductivity and temperature) should be constantly monitored. Basic standard of water quality in force in Poland are PN-EN ISO 3696:1999 for analytical laboratories, and Farmakopea Polska IX for pharmaceutical. The PN-EN ISO 3696:1999 standard describes three classes of water purity:

Class 1 Water without diluted contamination (colloidal ionic or organic), fitting the strictest analytical requirements, including a high-performance liquid chromatography. It is advised to obtain it from second purity class water, treating it with further processes (for example reverse osmosis or deionization, and then filtering through 0,2μm membrane for substance removal, or double distillation in a quartz apparatus). Class 2 Water with very low non-organic, organic and colloidal contamination. Should be obtained by a distillation, or a distillation forwarded by a deionization or a reverse osmosis. Class 3 Water for general purposes, used for „wet” chemical tasks. Obtained by a single distillation, a deionization or a reverse osmosis.

TECHNOLOGY Mechanical filtration Mechanical filtration is a basic and necessary method of water purification for most of our devices. It prepares the tap water for a softening process, an iron removal, a reverse osmosis and a UV lamp radiation. Its efficiency depends on a sediment module type, to the quality of demineralized water. It is made of a netted, stringed or foamed polypropylene cartridge and a housing. It holds all sort of mechanical contamination, such as sand, mud, stain of a grain size from 100 μm to 1μm. A sediment’s module lifetime depends on contamination type and varies between 3 and 6 months. Activated carbon filtration Contaminations existing in tap water are sorbed on an activated carbon. Hydrolab’s carbon modules prepare the tap water for further stages of purifcation process. They have a granulated or compressed activated carbon of 500-1000 nm permeability and a 1000 m2/g area. They indicate adsorption properties and remove chlorium, its derivatives and organic contamination extremely well, protecting the osmotic module. Large surface and permeability, as well as material bound by it, make a good environment for microorganisms. Activated carbon filters should be regularly replaced for minimizing the bacteria accumulation. With 0,3 - 0,4 mg/dm3 chlorium concentration, a twice a year replacement should be sufficient. Softening Water preparation for a reverse osmosis process, removes calcium and magnesium ions from water. Iron removal Water preparation for a reverse osmosis process, removes iron ions from water. Reverse osmosis module - RO An RO membrane holds up to 96-99% of diluted organic and non-organic contamination. Osmotic water conductivity varies between a few to several μS/cm. Retention level (96-99%) depends on salinity, temperature, pressure and flow speed of tap water. A semi-permeable osmotic membrane consists of many layers wrapped on a perforated central tube situated inside the membrane. Contaminated water is pumped under pressure on the membrane’s surface, where water molecules by diffusion flow through the membrane. Contaminations are extracted, purified water flows through the central tube and under pressure exits the membrane.

6

www.wenk-labtec.com

Demineralization on an ionex resin Deionization modules contain ionex resins in an ion H+/ OHˉ form. Osmotic water is purified on deionization columns, where remaining mineral salts are captured. In an ion exchange process, existing ions and molecules in water, having a particular charge, are bound by ionites. After this process, the conductivity decreases to 0,055 μS/cm. UV lamp 254nm UV lamp radiation is used for disinfection. These devices emit a radiation of a 254nm wave length, initiating a photochemical reaction damaging DNA structures of microorganisms existing in water. This radiation causes an irreversible deactivation of bacteria, viruses, mold, fungus and other organisms. UV lamp consists of a radiation tube with a UV radiator, protected by a quartz housing, mounted inside. 8500h lifetime. UV lamp 185/254 This device emits radiation of a 185 and 254nm wave length, damaging DNA structures and reducing TOC. 8500h lifetime. Ultrafiltration Ultrafiltration is a low-pressure process of separation, using asymmetrical permeable membranes, of a 1-10μm radius, letting water, salts and saccharides flow through it, separating them from proteins and larger molecules. Reduces endotoxins extremely well. Microfiltration 0,2 μm (capsule) Microfiltration capsule is a ready-to-use flow filter intended for sterilizing water. Made of a polypropylene housing and a double-layer membrane (cellulose acetate or polyetherosulfone) with a 0,2 μm and 0,45 μm pore size. Working surface is the pore amount equal to bacteria retained on a specific membrane area. It is 1 x 107 CFU/cm2 for the Brevundimonas diminuta.

www.wenk-labtec.com

7

SERIES TECHNICAL The TECHNICAL demineralizers are widely used water purification systems fed by tap water, and retain 96-99% of dissolved organic and non-organic contamination, heavy metals and radioactive elements. Fully automated and unattended, equipped with a control and measurement system, monitoring all the stages of the water purification process. Obtained water matches the PN-EN ISO 3696:1999, ASTM, CLSI standards for third class water quality. Perfect for washers, analyzers, autoclaves, environmental chambers, water baths, HLP demineralizers, as well as, through developing a proper network, supplying several laboratory rooms and floors. Standard: Water purified in this device fits the PN-EN ISO 3696:1999 standard for III purity class. Application: Obtained water is used for preparation of mediums, reagents, buffer solutions; can be used as a source for other laboratory devices – washers, analyzers, autoclaves, environmental chambers, cleaning systems. * device equipped with a UV lamp

General information Fed by: tap water Efficiency: 5 l/h Water intake speed: 1-2 I/min Retention level > 97-99% TOC < 50ppb Bacteria < 1cfu/ml * Standard Purity class Demineralized water fits the PN-EN ISO 3696:1999 standard for a third class of water purity.

MODELS Models

Efficiency l/h

Dimensions mm

Catalogue no.

Technical 5 Technical 10 Technical 15 Technical 25 Technical 40 Technical 60

5 10 15 25 40 60

230x400x510 230x450x580 230x450x580 230x450x580 260x470x650 260x470x650

DT-0005-0C DT-0010-0C DT-0015-0C DT-0025-0C DT-0040-0C DT-0060-0C

* the amount of purified water depends on the quality of tap water

8

www.wenk-labtec.com

Usage may be used for mediums, buffer solutions, reagents. Can supply other laboratory devices: washers, analyzers, autoclaves, polishing systems etc. *Device equipped with a UV lamp Technical specification: • Works under tap water pressure. • Water purification process levels: • sediment filtration, • activated carbon filtration, • reverse osmosis. • System efficiency: 5 dm3/h (daily: 1200 dm3).

• Equipped with a pump (increasing the feed water pressure) with automatics. • Retention level: 97-99% • Maximum filtrate pressure - 3 bar (45 psi). • Unattended and automated • Equipped with a nozzle with a minimum range of 2 meters. • Optional tank installation. • Automatic system shutdown when the tank is full or the filtrate valve is closed. • Optional connection to a washer, an autoclave etc. • May be used for making a demi water network with several water intake points. • Maintenance procedures may be performed by the user (easy disposables replacement). • Energy consumption: 0,55 kW. • Optional installation of a UV sterilizer. • Can be installed by the user. • Power supply: 230V/50Hz.   Functions monitoring the device: • The device is equipped with a 24V automatics with a microprocessor control and measurement system, that includes: • color display screen with a Touch Panel • conductometer measuring conductivity and temperature of feed and purified water (measured in µS/cm or MOhm), • clock displaying date and time, • information about current system status, • information about the membrane module retention level, • alarm informing about necessity to replace the mechanical and/or activated carbon filter, • graphic and sound alarm signal, • maintenance dates preview, • tank fill level, • built-in RS 232 connection to personal computers allowing to adjust maintenance frequency and alarm levels • built-in USB connection to personal computers allowing to adjust maintenance frequency and alarm levels • Software. • Manometer measuring feed water pressure.   Functions protecting the device: • Pump shutdown when: • the feed water pressure is too low (lack of feed water) low pressure sensor, • the tank is full - high pressure sensor. • Thermal protection of the RO module, automated system shutdown when the feed water temperature is below 4˚C or above 40˚C. • Can be automatically shut down when any alarm occurs. • System autostart. • Notification/alarm preview.    Dimensions (width x depth x height): 200x510x610mm   Feed water parameters: Conductivity < 1200 µS/cm Pressure > 0,35 MPa  Temperature: 5-40 0C Hardness < 250 mg CaCO3/dm3 Fe < 0,2 mg/dm3   Required connections: • cold tap water connection ½” lub ¾” • 230V socket • Drain

www.wenk-labtec.com

9

SERIES HLP HLP demineralizers are fed by tap water and match requirements of an every modern laboratory, in areas of supplying with purified water for instrumental and analytical purposes. Conductivity of obtained water does not exceed 0.055 µS/cm, so it is applicable for PN-EN ISO 3696:1999, ASTM, CLSI, FP IX standards. Water may also be used for AAS, ICP/MS, IC, HPLC, GC instrumental analyses. In addition, our demineralizers are equipped with a microprocessor control and measurement system.

General information Supply: tap water Efficiency: 10 dm3/h Purified water intake speed: 1-2 I/min Conductivity < 0,06 µS/cm Na+, SO42-, Cl-, Br-, N02-, NO3-, P043- < 0.5 ppb Fe, Zn, Cu, Cr, Mn < 0.1 ppb TOC < 30ppb Bacteria < 1cfu/ml * Particles > 0,2μm < 1/ml* Standard: Water purified in this device fits the PN-EN ISO 3696:1999 standard for I*, II, III purity class, and microbiological/ physicochemical FP IX requirements for purified production water*. Application: Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC*, GC*, bacteria cultures*, biochemical analyses* * device equipped with a UV lamp and a microfiltration capsule 0,22 μm

Technical specification Technical specification: Device operates under tap water pressure Water purification levels: - sediment filtration (two levels) - carbon filtration - reverse osmosis - initial ion exchange demineralization (main column) - UV lamp – 254 nm (model: HLPUV) - microfiltration cascade capsule 0,45/0,22 μm (models: HLPs, HLPsp, HLPUV)

Models

HLP 5 HLP 5s HLP 5p HLP 5sp HLP 5UV

Models

HLP 10 HLP 10s HLP 10p HLP 10sp HLP 10UV

Models

Efficiency l/h

Dimensions in mm

Standard PN-EN 3696:1999

Catalogue no.

Smart

4

200x360x420

II class

DH-0004-00

Models

HLP 20 HLP 20s HLP 20p HLP 20sp HLP 20UV

Models

*the amount of purified water depends on the quality of tap water

10

www.wenk-labtec.com

HLP 30 HLP 30s HLP 30p HLP 30sp HLP 30UV

Microfiltration 0,2 μm

Pump increasing pressure

Lamp 254 nm

Standard PN-EN 3696:1999

Catalogue no.

+ + +

+ + +

+

II class I class II class I class I class

DH-0005-00 DH-0005-0S DH-0005-0P DH-0005-SP DH-0005-UV

Microfiltration 0,2 μm

Pump increasing pressure

Lamp 254 nm

Standard PN-EN 3696:1999

Catalogue no.

+ + +

+ + +

+

II class I class II class I class I class

DH-0010-00 DH-0010-0S DH-0010-0P DH-0010-SP DH-0010-UV

Microfiltration 0,2 μm

Pump increasing pressure

Lamp 254 nm

Standard PN-EN 3696:1999

Catalogue no.

+ + +

+ + +

+

II class I class II class I class I class

DH-0020-00 DH-0020-0S DH-0020-0P DH-0020-SP DH-0020-UV

Microfiltration 0,2 μm

Pump increasing pressure

Lamp 254 nm

Standard PN-EN 3696:1999

Catalogue no.

+ + +

+ + +

+

II class I class II class I class I class

DH-0030-00 DH-0030-0S DH-0030-0P DH-0030-SP DH-0030-UV

Automatic and unattended system operation Mobile intake point of water. System equipped with a 10dm3 pressure storage tank. Optional tank replacement with a larger one User-performed maintenance procedures (easy disposables replacement). UV lamp lifetime – 8500 hours (model: HLPUV) Maximum operating pressure: 1 MPa Intended to be fed by cold water: 5-40°C

www.wenk-labtec.com

11

SERIES SPRING SPRING demineralizers are devices fed by tap water, with extended equipment and advanced automatics. Similar to HLP series, SPRING systems produce water of 0,055 μS/cm conductivity, matching the requirements of standards: PN-EN ISO 3696:1999, ASTM, CLSI, FP IX. These devices are intended for more demanding users, equipped with advanced automatics, that monitors the disposables usage, archiving data, allowing personalization of alarm levels for feed water, after reverse osmosis treatment and ultrapure, membrane rinsing, ultrapure water recirculation, and work with several adjutages simultaneously. Our devices also contain protection functions, that ensure that the system work is easy and comfortable. In Spring systems, the demineralization process on ion exchange resins is based on the SQF system (Slow Quick Flow), a new hydraulic solution allowing the filtrate recirculation, keeping the double demineralization. SQF results in a more efficient final demineralization by extended contact of a filtrate with the resin, while keeping a high product emission rate. Disposable modules count in SPRING systems is reduced to two: A (initial filtration) and B (cleaning column operating in the SQF system), connected by quick connectors, so the replacement procedure may be performed easily by the user.

MODELS

12



Models

Efficiency in l/h

Dimensions in mm

Catalogue no.



Spring 5 Spring 10 Spring 15 Spring 25 Spring 40 Spring 60

5 10 15 25 40 60

230x510x610 230x510x610 230x510x610 230x510x610 230x510x610 230x510x610

DS-0005-0C DS-0010-0C DS-0015-0C DS-0025-0C DS-0040-0C DS-0060-0C

www.wenk-labtec.com

General information: • fed by: tap water • efficiency: 5-60 l/h • purified water dosage speed 1-2 l/min • conductivity < 0,06 μS/cm • Na+, SO42-, Cl-, Br-, N02-, NO3-, P043- < 0,5 ppb • Fe, Zn, Cu, Cr, Mn < 0.1 ppb • TOC < 5 ppb • TOC < 3 ppb* • bacteria < 1 cfu/ml • particles > 0,2 μm < 1/ml • endotoxins < 0,001 EU/ml* • RNases < 0,01 ng/ml* • DNases < 4 pg/μl* Standard: Water purified in this device fits the PN-EN ISO 3696:1999 standard for I*, II, III purity class, and microbiological/ physicochemical FP IX requirements for purified production water*. Application: Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC*, GC*, bacteria cultures*, biochemical analyses*, molecular biology** * device equipped with a UV lamp and a microfiltration capsule 0,22 μm ** device equipped with an ultrafiltration module UF

Technical specification: • Device operates under tap water pressure • Water purification levels: - sediment filtration (two levels) - carbon filtration - reverse osmosis - ion exchange demineralization (SQF system) - UV lamp: 185/254 nm or 254 nm (optional) - ultrafiltration module (optional) - microfiltration capsule 0,45/0,2μm (optional) • Automatic and unattended system operation • System equipped with a 24V pump increasing feed water pressure, with an automatics. • Water intake point – purity class according to PN-EN ISO 3696:1999 equipped with a demi water nozzle of a min. 2 m reach • System equipped with a 10dm3 pressure storage tank • Optional connection to a washer, an autoclave, an analyser etc. • Optional installation of a UV sterilizer • Maximum operating pressure: 1 MPa • User-performed maintenance procedures (easy disposables replacement) • Intended to be fed by cold water: 5-40°C • Automatic membrane module rinsing • Energy consumption less than 25W • Energy consumption 50W (model: UV) • Power supply: 230V/50Hz • Optional user-performed device installation

www.wenk-labtec.com

13

SERIES ULTRA Devices providing ultrapure water, that fits the PN-EN ISO 3696:1999 standard for first purity class. System is fed by an external source of initially purified water that fits the requirements of II or III purity class, according to PN-EN ISO 3696:1999. Cleaning module is a fully automated and unattended system, equipped by default with an automatic diagnostic apparatus. Water purification levels: demineralization and recirculation on a mixed ion exchange resin (TOC), UV lamp – 185/254nm, ultrafiltration, microfiltration (0,45/0,22 μm capsule).

MODELS TOC – device equipped with a basic ion exchange TOC module and a microfiltration capsule (0,45/0,2 μm) in the recirculation loop TOC/UV – device equipped with a basic ion exchange TOC module, photooxidation UV module (185/254 nm) and a microfiltration capsule in the recirculation loop 0,45/0,2 μm (available lamps: 185 nm and 254 nm) TOC/UF – device equipped with a basic ion exchange TOC module, ultrafiltration module, and a microfiltration capsule (0,45/0,2 μm) in the recirculation loop

MODELS Models



TOC TOC/UV TOC/UF TOC/UV/UF

Catalogue no.

14

Microfiltration 0,2 μm

Cleaning ionite TOC

UV lamp 185/254 nm

Ultrafiltration module

Catalogue no.

+ + + +

+ + + +

- + - +

- - + +

DR-TOC-00 DR-TOC-UV DR-TOC-UF DR-TOC-UV-UF

EM-SB-21

EJ-2000-1

EUV-185-254

EU-ST-01

www.wenk-labtec.com

TOC/UV/UF – device equipped with a basic ion exchange TOC module, ultrafiltration module, photooxidation UV module (185/254 nm) and a microfiltration capsule (0,45/0,2 μm) in the recirculation loop

General information: • fed by: tap water • efficiency: 5-25 l/h • purified water dosage speed 1-2 l/min • conductivity < 0,055 μS/cm • Na+, SO42-, Cl-, Br-, N02-, NO3-, P043- < 0,5 ppb • Fe, Zn, Cu, Cr, Mn < 0.1 ppb • TOC < 5 ppb • TOC < 3 ppb* • bacteria < 1 cfu/ml • particles > 0,2 μm < 1/ml • endotoxins < 0,001 EU/ml* • RNases < 0,01 ng/ml* • DNases < 4 pg/μl* Standard: Water purified in this device fits the PN-EN ISO 3696:1999 standard for I purity class, and microbiological/physicochemical FP IX requirements for purified production water*. Application: Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses, molecular biology* * device equipped with an ultrafiltration module UF and a photooxidation module 185/254 nm Technical specification: System intended to be fed by purified water of II or III purity class, according to N-EN ISO 3696:1999 • Water purification levels: - demineralization on a spectrally clean mixed ion exchange TOC resin - UV lamp: 185/254 nm - ultrafiltration module - cascade microfiltration capsule 0,45/0,2μm • Automatic and unattended system operation • System equipped with a recirculation pump • Mobile intake point of water – first purity class according to PN-EN ISO 3696:1999, equipped with a microfiltration capsule 0,45/0,2 μm • Recurring, automatic purified water recirculation between water intakes • Automatic system shutdown if full recirculation • Maximum operating pressure: 0,3 MPa • User-performed maintenance procedures (easy disposables replacement) • Intended to be fed by cold water: 5-40°C • Energy consumption less than 50W • Optional user-performed device installation • Power supply: 230V/50Hz

www.wenk-labtec.com

15

SERIES R R demineralizers are devices that combine features of two series: Spring and Cleaning into one system, optimizing investment costs by reduction of shared construction areas. These devices produce ultrapure water fitting the FP IX and PN-EN ISO 3696:1999 standard for first purity class. They are also equipped with an extended automatics, that allows the user to monitor disposables performance, data archiving, individual adjustment of alarm levels for feed water parameters, water after reverse osmosis, and ultrapure, along with controlling the function of automatic membrane modules rinsing. These systems also have a set of protections for comfortable system operation.

Models: serie R - device equipped with a basic ion exchange TOC module in its recirtulation loop, and a microfiltration capsule 0,45/0,2 μm. CATALOGUE NO. DR-TOC-00 serie R UV - device equipped with a basic ion exchange TOC module in its recirculation loop, a photooxidation UV module 185/254 nm, and a microfiltration capsule 0,45/0,2 μm. (available lamp options: 185 nm and 254 nm). CATALOGUE NO. DR-TOC-UV

General information: • fed by: II, III purity class water (PN-EN ISO 3696:1999) • purified water dosage speed 1-3 l/min • conductivity < 0,055 μS/cm • Na+, SO42-, Cl-, Br-, N02-, NO3-, P043- < 0,5 ppb • Fe, Zn, Cu, Cr, Mn < 0.1 ppb • TOC < 5 ppb • TOC < 3 ppb* • bacteria < 1 cfu/ml • particles > 0,2 μm < 1/ml • endotoxins < 0,001 EU/ml* • RNases < 0,01 ng/ml* • DNases < 4 pg/μl* Standard: Water purified in this device fits the PN-EN ISO 3696:1999 standard for I purity class, and microbiological/physicochemical FP IX requirements for purified production water. Application: Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses, molecular biology* * device equipped with an ultrafiltration module UF and a photooxidation module 185/254 nm

Technical specification: Device operates under tap water pressure Water purification levels: - sediment filtration - carbon filtration - reverse osmosis - ion exchange demineralization (TOC) - UV lamp: 185/254 nm or 254 nm - ultrafiltration module UF - microfiltration capsule 0,45/0,2μm • Automatic and unattended system operation • System equipped with a recirculation pump • Mobile intake point of water – first purity class according to PN-EN ISO 3696:1999,equipped with a microfiltration capsule 0,45/0,2 μm • Optional installation of an additional water intake point for general laboratory purposes – III purity class, according to PN-EN ISO 3696:1999 • Recurring, automatic purified water recirculation between water intakes • System equipped with a 10dm3 pressure storage tank • Automatic system shutdown when a tank is full • Maximum working pressure: 1 MPa • User-performed maintenance procedures (easy disposables replacement) • Intended to be fed by cold water: 5-40°C • Automatic membrane module rinsing • Energy consumption: 50W • Optional user-performed device installation • Power supply: 230V/50Hz

serie R UF - device equipped with a basic ion exchange TOC module in its recirtulation loop, a photooxidation UV module 185/254 m, and a microfiltration capsule 0,45/0,2 μm. CATALOGUE NO. DR-TOC-UF serie R UV UF - device equipped with a basic ion exchange TOC module in its recirtulation loop, a photooxidation UV module 185/254 m, an ultrafiltration module, and a microfiltration capsule 0,45/0,2 μm (available lamp options: 185 nm and 254 nm). CATALOGUE NO. DR-TOC-UV-UF

16

www.wenk-labtec.com

www.wenk-labtec.com

17

SERIES BASIC BASIC deionizers are devices of a high demineralized water production efficiency. The quality of obtained water (depends on the tap water flow intensity) varies between 0.2-0.8 µS/cm. Fully automated and unattended devices are equipped with a microprocessor control and measurement system, which constantly monitors the water parameters. Purified water fits the PN-EN ISO 3696:1999, ASTM, CLSI standards for second class. BASIC deionizers are a perfect source of high quality water for washers, analyzers, autoclaves etc.

Standard: Water purified in this device fits the PN-EN ISO 3696:1999 standard for II, III purity class. Application: Basic water for general laboratory purposes; for instrumental analyses AAS, ICP/MS; obtained water may be used for preparations of mediums, buffer solutions, reagents; may be used as a source for other laboratoru devices: washers, analysers, autoclaves, environmental chambers, cleaning demineralizers Technical specification: • Device operates under tap water pressure • Water purification levels: - sediment filtration - ion exchange filtration • Conductivity of obtained water (dependable on tap water flow): 0,1 - 5 μS/cm • Water intake point – II purity class, according to PN-EN ISO 3696:1999, equipped with a demi water nozzle of a min. 2 m reach • User-performed maintenance procedures (easy disposables replacement) • Can be connected to an autoclave, a washer, a climate chamber etc. • Power supply: 230V/50Hz • Optional user-performed device installation • Monitoring message/alarm preview

MODELS

18



Models

Flow intensity [L/h]

Bed volume l

Catalogue no.



Basic 2 Basic 5 Basic 10 Basic 15 Basic 25

20-40 50-100 100-200 150-300 250-500

2 5 10 15 25

DB-002-0K DB-005-0K DB-010-0K DB-015-0K DB-025-0K

www.wenk-labtec.com

www.wenk-labtec.com

19

INDUSTRIAL SYSTEMS

SERIES PLUS

Plus series stations are devices used in tap water softening, preparing it for further treatment by our HLP, Technical, Spring demineralizers. They remove ions of calcium and magnesium from water.

INDUSTRIAL SYSTEMS – SPRING/TECHNICAL demineralizers, of an industrial efficiency of between 100 and 1000 dm3/h, allow to obtain water of a high pureness, matching the standards of PN-EN ISO 3696:1999, ASTM, CLSI and FP IX.

A resin is treated by cyclic regenerations, so it can be replenished to it’s initial performance of water softening – the system is able to operate over many years.

These demineralizers may be used in an industry (pharmaceutical, food, cosmetics, electronics, etc.) as a central unit producing demineralized water, distributed through a network, feeding multiple labratory rooms, floors or particular devices.

Models Plus T – time station – resin regeneration is fully automated, performed every defined time.

Design Design, production, service of laboratory water purification systems.

Plus V – volume station - resin regeneration is fully automated, performed every defined volume. Technical specification: Fed by tap water Initial water purification: • efficient 5 μm sediment filter (10” height in a housing with deaeration) • ion exchange resin – strong acid cationite • compact construction – ionite column situated inside a salt housing • high efficiency in hardness ion removal • resistant to corrosion tank made of glassfiber • automated rinsing and resin regeneration • modern controlling head • temporal resin regeneration

SPRING Models

Efficiency l/h

Catalogue no.

SPRING 100 SPRING 150 SPRING 200 SPRING 300 SPRING 400 SPRING 600

100 150 200 300 400 600

DS-0100-0C DS-0150-0C DS-0200-0C DS-0300-0C DS-0400-0C DS-0600-0C

Models

Efficiency l/h

Catalogue no.

TECHNICAL 100 TECHNICAL 150 TECHNICAL 200 TECHNICAL 300 TECHNICAL 400 TECHNICAL 600

100 150 200 300 400 600

DT-0100-0C DT-0150-0C DT-0200-0C DT-0300-0C DT-0400-0C DT-0600-0C

TECHNICAL MODELS

20

Models

flow intensity [l/h]

dimensions in mm

Catalogue no.

Plus T 10 Plus T 20 Plus V 10 Plus V 20

1000 1800 1000 1800

350x420x540 390x460x960 350x420x540 390x460x960

DP-010-0T DP-020-0T DP-010-0V DP-020-0V

www.wenk-labtec.com

www.wenk-labtec.com

21

SERVICE Hydrolab’s water purification devices are fed by tap water of a different quality. By several protection methods and process stages, we are able to provide the highest quality water for laboratory purposes. All of the stages are controlled, monitored and archived, so the service is effective, and its costs - optimized. Correct system performance relies on a regular service and maintenance, as well as good communication between the user and an authorized service point. SERVICE Standard replacement of disposables is performed by the user. Hydrolab’s devices inform the user, when the disposables will expire. The replacement may be performed manually by the user, and the materials are delivered within 24 hours after a request.    

Service contract Service contract ensures the User that the device inspection will be performed regularly on a planned time, guaranteeing a stable and efficient system work. We also extend the warranty and provide extra discounts. Periodic inspection All maintenance and service procedures can be planned individually with the user. Service calls Our service is able to react in a time that does not exceed 24 hours. Service procedures are adjusted individually to the user’s requirements and needs. We guarantee our service protection all over the country. Periodic inspection Inspection in the Hydrolab Service Department is time and cost effective. Hydrolab Service Department is responsible for the collection and delivery logistics. We provide a substitute system for the inspection time. Validations Hydrolab’s service guarantees full range of qualification process: installation (IQ), operational (OQ) and process (PQ). It is documented and made by Hydrolab. Modernization and improvement The user’s requirements may change over time. Thus, we are constantly improve current devices. We also design and build demi water network. Protection, monitoring, inspection We guarantee constant service protection during the warranty and post-warranty period, and full documentation (for example for an audit purpose). Each user has access to the Registration Card, made individually for every device made by Hydrolab, containing all necessary information (parameters, services, disposables deliveries, installations etc.)

22

www.wenk-labtec.com

www.wenk-labtec.com

47

Wenk LabTec GmbH Robert-Kahrmann-Str. 57 41334 Nettetal Tel.: +49-2153 / 95 29 49 - 0 Fax: +49-2153 / 95 29 49 - 99 E-Mail: [email protected] Internet: http://www.wenk-labtec.com

ISO 9001:2009 Design, production and service of water purification systems for laboratory and industrial purposes

www.wenk-labtec.com