Wastewater Systems
Accessories
Delta Environmental Products was founded in 1985, and is a firm dedicated to the research, development, manufacture and marketing of commercial and residential wastewater treatment systems and related adjunct products worldwide. Delta Environmental Products is a subsidiary of Pentair, a diversified operating company headquartered in Minnesota, whose Water Group is a global leader in providing innovative products and systems used worldwide in the movement, treatment, storage and enjoyment of water. Delta Environmental Products offers a full spectrum of wastewater treatment products to the on-site and commercial marketplace. Products include NSF certified aerobic wastewater treatment systems, pre-engineered drip/filter disposal systems, and custom electrical alarm and control panels. Delta on-site wastewater treatment products are the most effective and simplest on the market. They can be used on a broad spectrum of applications from single family residences to small commercial jobs. The effluent can be discharged to the surface, drip disposal, or other approved dispersal methods. Delta offers design layouts, combination controls, and necessary components for a wide variety of on-site wastewater treatment needs.
Denham Springs, Louisiana
Ashland, Ohio
Our Mission
Accessories Index
Delta Environmental Products is a respected leader in wastewater treatment
4
with more than 25 years of technical
Submersible Sump Pumps
design and manufacturing experience.
Submersible Effluent Pumps
4–7
Delta Environmental Products is
Submersible Sewage Pumps
8–10
Submersible Grinder Pumps
11–12
committed to the continuing development of new products in the 21st century.
High Water Alarms
13
solutions to the decentralized wastewater
Aerobic Treatment Air Compressors
13
treatment industry. Delta Environmental
Chlorinator Tablets
14
Products employs the highest quality
Float Switches
14
Junction and Distribution Boxes
14
Basin Accessories
14
Drip Disposal Components
15
Our mission is to be a leading provider of
products, technology and services.
DSP SERIES
DE33 SERIES
Cast Iron Submersible SUMP Pumps
Cast Iron Submersible Effluent Pumps
• Tethered float switch operates in sump diameters of 14" or larger. • Rugged cast iron motor housing and upper volute. Corrosion resistant composite base ideal for sump and effluent applications. • Screened intake prevents debris from entering the pump. • Oil-cooled motor transfers heat to sump water efficiently while lubricating internal motor components. • Heavy-duty lift-out ring, field serviceable. • Models range up to 62 gallons per minute at 5' of lift. • Anti air lock hole built into base; eliminates added labor. • 1⁄2" solids-handling capability. • Ball bearings and shaft seal are lubricated for long life. • Pump intake screen, impeller, base, switch, and power cord are easily serviceable.
• Bearings and mechanical seal permanently lubricated for long life. • Rugged Cast iron pump body and motor housing for applications needing a durable pump. • Non-clog vortex style impeller, pump-out vanes for seal protection. • Built-in thermal overload protection with automatic reset. • Cord design prevents oil loss from and moisture protection for motor. Easily replaceable power cord. • Heavy-duty lift-out ring, field serviceable. • 3⁄4" spherical solids-handling capability. • Stainless steel hardware allows for easy disassembly after extended service. • Standard controls available for automatic operation.
Specifications
Specifications
Motor Cover
Cast iron
Motor Cover
Upper Volute
Cast iron
Volute
Lower Volute
Fiberglass reinforced polypropylene
Impeller
Fiberglass reinforced Noryl® with threaded brass insert
Bearings
Upper sleeve and lower ball bearings, oil lubricated
Exterior Hardware
Stainless steel
Shaft Seal
Mechanical, carbon/ ceramic
Motor
Oil-cooled 1⁄3 HP and 1⁄2 HP versions available, 115V, single phase, 60 Hz
Switch
Tethered float or vertical
Power Cord
Cast iron Fiberglass reinforced Noryl® with threaded insert
Impeller Mechanical Seal
11⁄2" FNPT
Discharge 130°F
Bearings
Upper sleeve and lower ball bearings, oil lubricated
Lower Motor Housing O-Ring
Agency Listing
CSA
1
Capacity Liters per Minute
Maximum Liquid Temperature
100
Noryl® is a registered trademark of General Electric Co.
150
200
Performance Curve
250
Capacity Liters per Minute
30
15
–1 /2 H
–1 /3 HP
P
6
4
10 2
5
10
20
30
40
50
60
70
0
0
50
100
150
200 8
25
Total Head In Feet
DSP 33
8
30
Total Head In Meters
DS P5 0
20
55°C CSA
10
25
130°F
Agency Listing
20
6
15 4 10 2
5
Capacity Gallons per Minute 0
10
20
30
40
Capacity Gallons per Minute
4
50
60
0
Total Head In Meters
50
20' water resistant 16-3 SJTW-A/SJTW with integrally grounded three-prong plug
In order to provide the best products possible, specifications are subject to change.
Performance Curves 0
Stainless steel ⁄3 HP, 1550 RPM, 115V or 230V, singlephase, 60 Hz. Oil-filled. Built-in thermal overload protection with automatic reset
Motor
Power Cord
In order to provide the best products possible, specifications are subject to change.
Total Head In Feet
Buna-N
Exterior Hardware and Nameplate
55°C
Noryl® is a registered trademark of General Electric Co.
0
Type 6A or equal, Buna-N elastomers, carbon and ceramic sealing faces, stainless steel metal parts
10' or 20' grounded three-prong, water-resistant, type SJTW-A/SJTW
Maximum Liquid Temperature
35
Cast iron
DE40 SERIES
DE40H SERIES
Cast Iron Submersible Effluent Pumps
Cast Iron Submersible HIGH HEAD Effluent Pumps
• Heavy-duty cast iron motor housing and upper volute. Corrosion-resistant composite base ideal for effluent applications. • Bearings and mechanical seal permanently lubricated for long life. • Pump-out vanes for seal protection. • Built-in thermal overload protection with automatic reset. • Cord design prevents oil loss from and moisture protection for motor if cord is damaged. • Heavy-duty lift-out ring, field serviceable. • 1 ⁄2" spherical solids-handling capability. • Field replaceable power cord. • Built-in suction screen on intake.
• Bearings and mechanical seal permanently lubricated for long life. • Rugged Cast iron pump body and motor housing for applications needing a durable pump. • Non-clog vortex style impeller, pump-out vanes for seal protection. • Built-in thermal overload protection with automatic reset on single phase. • Cord design prevents oil loss from and moisture protection for motor. • Heavy-duty lift-out ring, field serviceable. • 3⁄4" spherical solids-handling capability. • Stainless steel hardware allows for easy disassembly after extended service. • Standard controls available for automatic operation.
Specifications
Specifications
Motor Cover
Cast iron
Upper Volute
Cast iron
Lower Volute Base
Motor Cover
Fiberglass reinforced polypropylene
Motor Housing
Cast iron Fiberglass reinforced Noryl® with threaded brass insert
Impeller Shaft Seal
Cast iron
Volute
Cast iron Fiberglass reinforced Noryl® with threaded insert
Impeller Mechanical Seal
Type 6A or equal, Buna-N elastomers, carbon and ceramic sealing faces, stainless steel metal parts
Mechanical, carbon/ceramic
Bearings
Upper sleeve and lower ball bearings, oil lubricated
O-Rings
Power Cord
20' water resistant 16-3 gauge, type SJTW-A/ SJTW with integrally grounded 3-prong plug
Maximum Liquid Temperature
130°F
55°C
Agency Listing
Stainless steel ⁄10 HP, 3450 RPM, 115V or 230V single phase, 60 Hz. Oil-filled. Built-in thermal overload protection with automatic reset and permanent split capacitor on single phase only. Stainless steel motor shaft.
Motor
Stainless steel 4 ⁄10 HP, 1550 RPM, 115V, 60 Hz. Class B insulation. Oil-filled shaded pole containing built-in thermal overload protection with automatic reset
Motor
Lower ball, upper sleeve type, oil lubricated
Exterior Hardware and Nameplate
Buna-N
Exterior Hardware and Nameplate
Bearings
CSA
4
Power Cord
20' oil and water resistant 18-3 SJTW-A/ SJTW with integrally grounded 3-prong plug, single phase. UL Listed. Stainless steel cord connector.
Maximum Liquid Temperature
130°F
55°C
Agency Listing
CSA
Noryl® is a registered trademark of General Electric Co.
Noryl® is a registered trademark of General Electric Co.
In order to provide the best products possible, specifications are subject to change.
In order to provide the best products possible, specifications are subject to change.
Performance Curve
Performance Curve
Capacity Liters per Minute 0
50
100
Capacity Liters per Minute
150
200
250 40
10
50
100
150
200
250 12
35
20
6
15
4
10 2
5
10
Total Head In Feet
8
25
Total Head In Meters
Total Head In Feet
30
0
30 8
25 20
6
15
4
10 2
5 0
10
20
30
40
50
Capacity Gallons per Minute
60
70
Total Head In Meters
35
0 0
10
20
30
40
50
60
70
0
Capacity Gallons per Minute
5
DE50/DE50H/DE100 SERIES
DE200 SERIES
Cast Iron Submersible Effluent Pumps
Cast Iron Submersible Effluent Pumps
• Bearings and mechanical seal permanently lubricated for long life. • Rugged Cast iron pump body and motor housing for applications needing a durable pump. • Non-clog vortex style impeller, pump-out vanes for seal protection. • Built-in thermal overload protection with automatic reset on single phase. • Cord design prevents oil loss from and moisture protection for motor. • Heavy-duty lift-out ring, field serviceable. • 3⁄4" spherical capability solids handling. • Stainless steel hardware allows for easy disassembly after extended service. • Standard controls available for automatic operation. • Mechanical float (non mercury). • Silicon Carbide Seals
• Dual Shaft Seals – Primary mechanical seal with a secondary self-lubricating lip seal. • Rugged Cast iron pump body and motor housing for applications needing a durable pump. • Bearings and mechanical seal permanently lubricated for long life. • Non-clog semi-open impeller. • Built-in thermal overload protection with automatic reset on single phase. • Cord design prevents oil loss from and moisture protection for motor. • 3⁄4" spherical capability solids handling. • Stainless steel hardware allows for easy disassembly after extended service. • Standard controls available for automatic operation.
Specifications
Specifications
Volute Casing
Cast iron
Volute Casing
Cast iron
Upper and Lower Motor Housing
Cast iron
Upper and Lower Motor Housing
Cast iron
Impeller
Cast iron
Impeller
Mechanical Seal
Type 6A or equal, Buna-N elastomers, silicon carbide sealing faces, stainless steel metal parts
Bearings
Cast iron
Shaft Seal
Primary: mechanical type 6A or equal, Buna-N elastomers, silicon carbide sealing faces, stainless steel metal parts Secondary: self-lubricating lip seal
Ball type, oil lubricated
Exterior Hardware and Nameplate
Mechanical Seal
Stainless steel ⁄2, and 1 HP, 3450 RPM, 115 Volts (1⁄2 HP only) or 230 Volts single phase or 208230/460 Volts three phase, 60 Hz. Oil-filled. Built-in thermal overload protection with automatic reset and permanent split capacitor on single phase only. Stainless steel motor shaft and impeller lock nut.
Motor
Type 6A or equal, Buna-N elastomers, silicon carbide sealing faces, stainless steel metal parts
1
Power Cord
Single Phase: 20' oil and water resistant 16-3 SJTW-A/SJTW with integrally grounded 3-prong plug. UL listed. Three Phase: 20' oil and water resistant 16-4 STW-A/STW.
Maximum Liquid Temperature
130°F
55°C
Agency Listing
CSA
In order to provide the best products possible, specifications are subject to change.
Performance Curves
Bearings
Ball type, oil lubricated
Exterior Hardware and Nameplate Motor
Power Cord
20' oil and water resistant 16-3 SJTW-A/SJTW with integrally grounded 3-prong plug. UL Listed.
Maximum Liquid Temperature
50
100
150
In order to provide the best products possible, specifications are subject to change.
Performance Curve 200
250
300
350
400
90
26
0-1
60
20
HP
18 16
DE50 H-1 /2 HP DE50 - 1/2 HP
50 40
14 12 10 8 6
30 20
4
10
2
0
100
200
300
400
600
500
25
80 70
Total Head In Feet
DE10
24 22
Total Head In Meters
Total Head In Feet
Capacity Liters per Minute
450
80 70
55°C CSA
20
60 50
15
40 10
30 20
5
10
0 0
20
40
60
80
Capacity Gallons per Minute
6
100
120
0 0
20
40
60
80
100
Capacity Gallons per Minute
120
140
160
Total Head In Meters
0
130°F
Agency Listing
Capacity Liters per Minute 90
Stainless steel 2 HP, 3450 RPM, 230V single phase, 60 Hz, oil-filled. Built-in thermal overload protection with automatic reset and permanent split capacitor on single phase only. Stainless steel motor shaft and impeller lock nut.
D4EM SERIES
D4EB SERIES
High Head Multistage Submersible Effluent Pumps
4" Multistage Submersible EFFLUENT Pump
• Proven “Floating Impeller” Staging System incorporates 1st-in-class performance, sand-handling and thrust management staging system with the industry exclusive “dry-run” design element. Reinforced engineered composites and stainless steel, offering high resistance to corrosion and abrasion. • Tested-tough, fiberglass-reinforced thermoplastic discharge, with proven internal check valve. Large wrench flats and rope hole. • 300-grade stainless steel pump shell offers high corrosion resistance. • 3⁄8" Hexagonal, 300-grade stainless steel pump shaft offers generous impeller drive surfaces. • Exclusive self-lubricating Nylatron® shaft bearing resists surface wear from sand. • Tested-tough fiberglass-reinforced thermoplastic motor bracket incorporates an integral suction screen.
• The proven patented staging system uses a patented ceramic wear surface. When incorporated with Delta’s “true” independent floating impellers it dominates with 1st-in-class performance, superior sand-handling, and a thrust management staging system with industry exclusive “dry-run” capabilities. • Features a draw-down of 41⁄2". • Over 25% less amp draw (9.5 amps vs. 12.7 amps, 115V) than a 4" NEMA submersible, reducing operating costs and extending the service life of float switch contacts. • The D4EB Series uses the pumped liquid to cool the motor as it passes over the motor. The water passing over the motor dampens the motor noise, eliminating expensive “flow-inducer sleeves” required when using a standard 4" NEMA submersible. • Precision molded impellers for perfect balance…ultra smooth for the highest performance and efficiency. Allows for .080" solids. • Positive drive, hexagonal 7⁄16", 300-grade stainless steel shaft offers generous impeller drive surfaces. • Exclusive self-lubricating Nylatron® shaft bearing resists surface wear from sand and abrasives. • 300-grade heavy-walled stainless steel shell, corrosion resistant.
Specifications
Specifications
Shell
Stainless steel
Discharge
10, 20 and 30 GPM models, fiberglass-reinforced thermoplastic
Discharge Bearing
Nylatron®
Impellers
Delrin®
Diffusers
Polycarbonate
Suction Caps
Polycarbonate with stainless steel wear ring
Thrust Pads
Proprietary spec.
Shaft and Coupling
Stainless steel 300 grade
Intake
Shell
Stainless steel (300 grade) 11⁄4" Fiberglass-reinforced thermoplastic
Discharge Discharge Bearing
Nylatron®
Impellers
Acetal
Diffusers
Polycarbonate
Suction Caps
Polycarbonate with stainless steel wear ring
Thrust Pads
Proprietary spec.
Shaft and Coupling
Stainless steel (300 grade)
Intake
Fiberglass-reinforced thermoplastic
Fiberglass-reinforced thermoplastic
Intake Screen
Intake Screen
Polypropylene
Stainless steel
Jacketed Cord
300V “SOOW” jacketed 10' leads (2-wire with ground); optional 20', 30', 50' and 100' lengths available
Jacketed Cord
600V “SJOW” jacketed 10' leads, 2-wire with ground
Agency Listing
CSA
Agency Listing
CSA
Nylatron® is a registered trademark of Polymer Corp. In order to provide the best products possible, specifications are subject to change.
Nylatron® is a registered trademark of Polymer Corp. Delrin® is a registered trademark of E.I. DuPont de Nemours and Co. In order to provide the best products possible, specifications are subject to change.
Performance Curves Capacity Liters per Minute
Performance Curves
250
Capacity Liters per Minute 75
100
125
175 80
M
70 60
M GP
200 175 150
50 20 GP M
100
40 D4E 30M –30
75 50
30 20
GP M
10
25 0
10
20
30
100
125
150
175
75
40
50
50 150
100 25 50
0
10
20
0B E2 D4
125
75
10B D4E
D4 E2 0M –
50
200 150
0 –1
225
50
25
D4 E3 0B
30
40
50
Total Head In Meters
D4 E1 0
250
Total Head In Feet
25
Total Head In Feet
0
Total Head In Meters
275
0
0
Capacity Gallons per Minute
0
Capacity Gallons per Minute
7
DS40 SERIES
DS50 SERIES
Cast Iron Submersible Seawage Pumps
Cast Iron Submersible Sewage Pumps
• Bearings and mechanical seal permanently lubricated for long life. • Non-clog vortex style impeller. • Built-in thermal overload protection with automatic reset. • Heavy-duty lift-out ring, field serviceable. • 2" spherical solids-handling capability. • Stainless steel hardware allows for easy disassembly after extended service. • Tethered float switch available for automatic operation.
• Bearings and mechanical seal permanently lubricated for long life. • Rugged Cast iron pump body and motor housing for applications needing a durable pump. • Non-clog vortex style impeller. • Built-in thermal overload protection with automatic reset on single phase. • Heavy-duty lift-out ring, field serviceable. • 2" spherical solids-handling capability. • Stainless steel hardware allows for easy disassembly after extended service. • Standard controls available for automatic operation.
Specifications
Specifications
Motor Cover
Cast iron
Motor Cover
Upper Volute
Cast iron
Volute
Lower Volute
Fiberglass reinforced polypropylene
Cast iron Cast iron
Impeller
Fiberglass reinforced Noryl® with brass threaded insert Type 6A or equal, Buna-N elastomers, carbon and ceramic sealing faces, stainless steel metal parts
Impeller
Fiberglass reinforced Noryl® with brass threaded insert
Mechanical Seal
Mechanical Seal
Type 6A or equal, Buna-N elastomers, carbon and ceramic sealing faces, stainless steel metal parts
Bearings
Bearings
Upper sleeve and lower ball bearings
Exterior Hardware and Nameplate
Exterior Hardware and Nameplate
Stainless steel
Ball/sleeve type, oil lubricated ⁄2 HP, 1550 RPM, 115V, single-phase, 60 Hz. Oil-filled. Built-in thermal overload protection with automatic reset 20' water resistant 16-3 SJTW-A/SJTW with integrally grounded three-prong plug
1
Motor
4/10 HP, 1500 RPM, 115V single phase, 60 Hz, oil-filled. Thermal overload protection with automatic reset
Power Cord
Power Cord
20' water resistant 16-3 SJTW-A/SJTW with integrally grounded three-prong plug
Maximum Liquid Temperature
Maximum Liquid Temperature
130°F
Agency Listing
55°C CSA
Noryl is a registered trademark of General Electric Co. ®
Stainless steel
Motor
130°F
55°C
Agency Listing
CSA
Noryl® is a registered trademark of General Electric Co. In order to provide the best products possible, specifications are subject to change.
In order to provide the best products possible, specifications are subject to change.
Performance Curve
Performance Curve
Capacity Liters per Minute
Capacity Liters per Minute 200
300
400
500
600
4 10
2 5
40
80
Capacity Gallons per Minute
8
120
160
200
300
400
500
600
6
15 4 10
2 5
0 0
100
6
15
Total Head In Feet
0
0
20
40
60
80
100
Capacity Gallons per Minute
120
140
160
0
Total Head In Meters
100
Total Head In Feet
0
Total Head In Meters
20
20
DS50F SERIES
DS50H/DS75 SERIES
Cast Iron Submersible HIGH FLOW Sewage Pumps
Cast Iron Submersible Sewage Pumps
• Bearings and mechanical seal permanently lubricated for long life. • Non-clog semi-open vane impeller. • Built-in thermal overload protection with automatic reset. • Heavy-duty lift-out ring, field serviceable. • 2" spherical solids-handling capability. • Stainless steel hardware allows for easy disassembly after extended service. • Optional automatic float switch. • Oil-filled capacitor greatly enhances the continuous duty motor rating.
• Bearings and mechanical seal permanently lubricated for long life. • Non-clog vortex style impeller with integral rim to reduce casing and impeller wear. • Built-in thermal overload protection with automatic reset on single phase. • Heavy-duty lift-out ring, field serviceable. • 2" spherical solids-handling capability. • Stainless steel hardware allows for easy disassembly after extended service.
Specifications
Specifications
Volute Casing
Cast iron
Volute Casing
Cast iron
Upper and Lower Motor Housing
Cast iron
Upper and Lower Motor Housing
Cast iron
Impeller
Cast iron
Impeller
Mechanical Seal
J. Crane™ type 6A or equal, Buna-N elastomers, silicon carbide seal faces, stainless steel metal parts
Bearings
Upper sleeve and lower ball bearings, oil lubricated
Exterior Hardware and Nameplate
Stainless steel 1 ⁄2 HP, 1725 RPM, 115V single-phase, 60 Hz. Oil-filled. Permanent split capacitor. Built-in thermal overload protection with automatic reset
Motor
Power Cord
20' oil and water resistant SJTW-A/SJTW 16/3 cord with UL/CSA Listed integrally grounded three-prong plug
Maximum Liquid Temperature
130°F
Cast iron
Mechanical Seal
Type 6A or equal, Buna-N elastomers, silicon carbide sealing faces, stainless steel metal parts
Bearings
Ball type, oil lubricated
Lower Motor Housing O-Ring
Buna-N
Exterior Hardware and Nameplate
Stainless steel 1 ⁄2 and 3⁄4 HP, 1725 RPM, 115V or 230V single-phase, 60 Hz. Oil-filled. Permanent split capacitor. Built-in thermal overload protection with automatic reset. Stainless steel motor shaft and impeller lock nut.
Motor*
Power Cord
20' oil and water resistant 16-3 SJTW-A/ SJTW with UL Listed integrally grounded three-prong plug.
55°C
Agency Listing
CSA
In order to provide the best products possible, specifications are subject to change.
Oil-Filled Capacitor
Greatly enhances the continuous duty motor rating.
Maximum Liquid Temperature
130°F
55°C
Agency Listing
Performance Curve
CSA
In order to provide the best products possible, specifications are subject to change.
Capacity Liters per Minute 0
100
200
300
400
500
600
Capacity Liters per Minute 6
15 4 10 2 5
0
20
40
60
80
100
120
Capacity Gallons per Minute
140
160
180
0
40
0
100
200
300
400
500
600
35
12 10
30 8
25 20 DS5 0
15 10
DS 75 -
H-
3 /4
6 HP
4
1/2 HP
Total Head In Meters
20
Total Head In Feet
Total Head In Feet
Performance Curves
8
25
Total Head In Meters
30
2
5 0
20
40
60
80
100
120
140
160
0
Capacity Gallons per Minute
9
DS100/DS150/DS200 SERIES Cast Iron Submersible Sewage Pumps 1, 11⁄2, & 2 HP
Specifications
• Bearings and mechanical seal permanently lubricated for long life. • Rugged Cast iron pump body and motor housing for applications needing a durable pump. • Non-clog two vane semi-open style impeller. • Built-in thermal overload protection with automatic reset on single phase. • Heavy-duty lift-out ring, field serviceable. • 2" spherical solids-handling capability. • Dual Shaft Seals–primary mechanical seal with a secondary self-lubricating lip seal. • Standard controls available for automatic operation.
Volute Casing
Cast iron
Upper and Lower Motor Housing
Cast iron
Impeller Shaft Seal
Bearings Motor*
Oil-Filled Capacitor Maximum Liquid Temperature
Performance Curves
Agency Listing
Capacity Liters per Minute
DS2 00 -
50
Total Head In Feet
100
200
300
400
500
600
700
800
16
2H P
DS150 - 1-1/ 2 HP DS10 0-1 HP
40
12
30 8 20 4
10
0
50
100
150
Capacity Gallons per Minute
10
200
Stainless steel 1, 11⁄2 and 2 HP, 1725 RPM, 230V single phase, 60 Hz. Oil-filled. Built-in thermal overload protection with automatic reset and permanent split capacitor on single phase only. Stainless steel motor shaft and impeller lock nut. 20' UL/CSA Listed. 3-wire 16-3 SJTW-A/ SJTW water resistant cord with integrally grounded three-prong plug. Greatly enhances the continuous duty motor rating 130°F
55°C CSA
In order to provide the best products possible, specifications are subject to change.
900
250
0
Total Head In Meters
0
Ball type, oil lubricated
Exterior Hardware and Nameplate
Power Cord
60
Cast iron Primary: mechanical type 21 or equal, Buna-N elastomers, silicon carbide seal faces, stainless steel metal parts; Secondary: self-lubricating energized nitrile lip seal
D1C20-21 SERIES
D1P20-21 SERIES
Submersible GRINDER Pump 2 HP, 3450 RPM
Submersible GRINDER Pump 2 HP, 1750 RPM
• High torque oil-filled motor conducts heat and lubricates bearings. • Rugged Cast iron pump body and motor housing for applications needing a durable pump. • Cable entry system provides double seal protection. Cable jacket sealed by compression fitting. Individual wires sealed by potting epoxy. Power cord can be replaced without disturbing motor. • Overload-heat sensor protects motor from burn-out due to excessive heat from any overload condition. Automatically resets when motor has cooled. • The mechanical shaft seal is constructed with a ceramic stationary face and a carbon rotating face and is field proven for long service life. • Grinder impeller and shredding ring are replaceable without dismantling pump. Constructed of 440 SST hardened to 56-60 Rockwell. • Engineered thermoplastic recessed impeller handles ground slurry without clogging or binding. Provides unobstructed flow passage. Reduces radial loads. pump-out vanes help keep trash from seal, reduces pressure at seal face.
• High torque oil-filled motor conducts heat and lubricates bearings. Class F VFD/continuous duty rated. • Rugged Cast iron pump body and motor housing for applications needing a durable pump. • Water resistant power cord with molded plug is available in 20' (6m) lengths. • The heavy-duty ball bearings, upper (radial) and lower (thrust), are continuously lubricated by oil to ensure long service life. • Overload heat sensor protects motor from burn-out due to excessive heat from any overload condition. Automatically resets when motor has cooled. • The mechanical seal is constructed with a ceramic stationary face and a carbon rotating face and is field proven for long service life. • Grinder impeller and shredding ring are replaceable without dismantling pump. Constructed of 440 SST hardened to 56-60 Rockwell.
Capabilities
Capabilities
Liquids Handling
Domestic raw sewage
Intermittent Liquid Temperature
Up to 140° F
Up to 60° C
311˚ F
155˚ C
Winding Insulation Temp. (Class F) Motor Electrical Data
Liquids Handling
Domestic raw sewage
Intermittent Liquid Temperature Winding Insulation Temp. (Class F)
Up to 140° F
Up to 60° C
311˚ F
155˚ C
2 hp, 3450 RPM, 1 ph–Capacitor start/run 230V, 60 Hz, 15.0 amps
Motor Electrical Data
6–9
Acceptable pH Range
.9–1.1
Discharge Size, NPT
1¼ in.
31.75 mm
Unit Weight
85 lbs.
38 kg
Acceptable pH Range Specific Gravity Viscosity
28–35 SSU
Discharge Size, NPT
1¼ in.
31.75 mm
Minimum Sump Diameter Simplex Duplex
24 in. 36 in.
61.0 cm 91.4 cm
Construction Materials Motor Housing, Seal Housing, Volute Case
Cast iron, Class 30, ASTM A48
Power Cord
20 ft., 14/3, SJOW/SJOW-A
Mechanical Shaft Seals Standard Optional
Carbon and ceramic Tungsten carbide
Pump, Motor Shaft
416 SST
2 hp, 1750 RPM, 1 ph–capacitor start/run 230V, 60 Hz, 12.0 amps 6–9
Construction Materials Motor Housing, Volute Case
Cast iron, Class 30, ASTM A48
Shaft
Stainless steel
Cutters
440C hardened 55–60 Rockwell C
Power Cord
20 ft., 14/3, SJOW/SJOW-A
Rotor
Buna-N, DBL helix
Stator
300 series SST, single lobe
Mechanical Seals
Seal–carbon and ceramic Seal body–stainless steel Spring–stainless steel Bellows–Buna-N Single ball
Fasteners
300 series SST
Shredding Ring, Grinder Impeller
440 SST, 58–60 Rockwell
Bearings Upper and Lower
Recessed Impeller
Engineered thermoplastic
Agency Listing
Agency Listing
CSA, UL
CSA, UL
In order to provide the best products possible, specifications are subject to change.
In order to provide the best products possible, specifications are subject to change.
Performance Curve Performance Curve
Capacity Liters per Minute 0
Capacity Liters per Minute 20
40
60
80
100
120
140
160
180
24
D1C20-21
20 60
16 12
40
8 20
4 0
5
10
15
20
25
30
35
40
45
50
0
Total Head In Feet
Total Head In Feet
28
Total Head In Meters
32
0
1.5
2
2.5
3
3.5
4
4.5
240
72
200
60
160
48
36
100 80
1
120
36
D1P20-21
80
24
40
12
0
5
7
9
11
13
15
17
19
Total Head In Meters
120
0
.5
0
Capacity Gallons per Minute
Capacity Gallons per Minute
11
D2C20-21 SERIES
D2CX20-21 SERIES
Submersible GRINDER Pump 2 HP, 3450 RPM
Submersible EXPLOSION PROOF GRINDER Pump 2 HP, 3450 RPM
• Powerful motor is press fit for perfect alignment and best heat transfer. Oil-filled motor conducts heat and lubricates bearings. Class F VFD/ continuous duty rated. • Rugged Cast iron pump body and motor housing for applications needing a durable pump. • Cable entry system provides double seal protection. Cable jacket sealed by compression fitting. Individual wires sealed by compression grommet. Power cord can be replaced without disturbing motor. • Overload-heat sensor (1 phase only) Protects motor from burn-out due to excessive heat from any overload condition. Automatically resets when motor has cooled. • Grinder impeller and shredding ring are replaceable without dismantling pump. • Cast iron recessed impeller handles ground slurry without clogging or binding. Provides unobstructed flow passage. Reduces radial loads. Pump-out vanes help keep trash from seal, reduces pressure at seal faces. • Optional seal leak probe detects water in seal housing, activates warning light in control panel.
• Powerful motor is press fit for perfect alignment and best heat transfer. Oil-filled motor conducts heat and lubricates bearings. • Rugged Cast iron pump body and motor housing for applications needing a durable pump. • Cable entry system provides double seal protection. Cable jacket sealed by compression fitting. Individual wires sealed by epoxy potting. • Heat sensor protects motor from burn-out due to excessive heat from any overload condition. Automatically resets when motor has cooled. • Double tandem mechanical shaft seals protect motor. Oil-filled seal chamber provides continuous lubrication. • Grinder impeller and shredding ring are replaceable without dismantling pump. Constructed of 440 SST hardened to 56-60 Rockwell. • Bronze recessed impeller handles ground slurry without clogging or binding. Provides unobstructed flow passage. Reduces radial loads. Pump-out vanes help keep trash from seal, reduces pressure at seal faces. • Seal leak probe detects water in seal housing, activates warning light in control panel.
Capabilities
Capabilities
Liquids Handling
Domestic raw sewage
Intermittent Liquid Temperature
Up to 140° F
Up to 60° C
311˚ F
155˚ C
Winding Insulation Temp. (Class F) Motor Electrical Data
Liquids Handling
Domestic raw sewage
Intermittent Liquid Temperature Motor Electrical Data
6–9
Acceptable pH Range
Specific Gravity
.9–1.1
Viscosity 1¼ in.
155˚ C
2 hp, 3450 RPM, 1 ph–capacitor start/run 230V, 60 Hz 6–9
Specific Gravity
28–35 SSU
Discharge Size, NPT
Up to 60° C
311˚ F
Winding Insulation Temp. (Class F)
2 hp, 3450 RPM, 1 ph–capacitor start/run 230V, 60 Hz
Acceptable pH Range
Up to 140° F
.9–1.1
Viscosity 31.75 mm
28–35 SSU
Discharge Size, NPT
1¼ in.
31.75 mm
NOTE: Consult factory for applications outside of these recommendations.
Construction Materials
Construction Materials Motor Housing, Seal Housing, Cord Cap, Volute Case, Recessed Impeller
Cast iron, Class 30, ASTM A48
Power Cord
15 ft., 14/5, SOOW 15 ft., 14/5, SOOW
w/Seal Probe w/o Seal Probe
Cast iron, Class 30, ASTM A48
Impeller
Recessed, bronze
Power Cord
15 ft., 14/4, SOOW
Control Cord
15 ft., 18/5, SOOW
Mechanical Shaft Seals Standard Optional
Double tandem carbon and ceramic Lower tungsten carbide
300 series SST
Pump, Motor Shaft
416 SST
440 SST, 58–60 Rockwell
Fasteners
300 series SST
Shredding Ring, Grinder Impeller
440 SST, 58–60 Rockwell
Mechanical Seals
Double tandem carbon and ceramic
Pump, Motor Shaft
416 SST
Fasteners Shredding Ring, Grinder Impeller
Motor Housing, Seal Housing, Cord Cap, Volute Case
Agency Listing
CSA, UL
In order to provide the best products possible, specifications are subject to change.
Agency Listing
CSA, FM
In order to provide the best products possible, specifications are subject to change.
Performance Curve
Performance Curve
Capacity Liters per Minute 20
40
60
80
100
120
140
160
180
Capacity Liters per Minute
36 120
32
80
24
D2C20-21
20 60
16 12
40
8 20 0
4 0
5
10
15
20
25
30
35
Capacity Gallons per Minute
40
45
50
20
40
60
80
100
120
140
180
36 32 28
80
24
D2CX20-21
20 60
16 12
40
8 20
4
0 0
0
5
10
15
20
25
30
35
Capacity Gallons per Minute
12
160
100
Total Head In Feet
28
Total Head In Meters
Total Head In Feet
100
0
40
45
50
0
Total Head In Meters
120
0
High Water Alarms Delta Environmental Products alarm panels are the intelligent choice in alarm panel technology. Delta Environmental Products also manufactures a variety of control panels designed to meet specific customer needs. All panels can be supplied with UL and/ or Canada cUL 508A listings upon request. Custom panels can be furnished to meet specific local requirements. Contact Delta for more information on custom controls. Part Number
SA-1
Description Indoor Alarm
OSA-1
Outdoor Alarm
• Polycarbonate construction • Audible alarm • Visual alarm • Fuse protected • NEMA 4 outdoor rated
OSA-1MF
Outdoor Alarm
• Polycarbonate construction • Audible alarm • Visual alarm • Fuse protected • NEMA 4 outdoor rated • Includes mercury-free switch
Features & Benefits • One panel design • Controls more than one component in system • Fiberglass NEMA 4X or steel 3R enclosure • UL listed available • All panels finger safe
Features & Benefits • Polycarbonate construction • Audible alarm • Visual alarm • Fuse protected • Mercury-free switch
Aerobic Treatment Air Compressors Delta Environmental Products offers a wide variety of air compressors for individual aerobic treatment units. Extreme conditions/applications such as high altitudes, extreme temperatures or excessive dust require careful air compressor consideration. Consult the factory to choose from one of the following air compressor options for your application.
Compressor
Air Filter
C50397-P C50402-P
C50159 C50272
C56300 C50318
Features & Benefits
HP60-80-Filter HP100-120-Filter
Rotary Air Compressors
HiBlow™ HP40SRVKIT HP60/80SRVKIT HP100/120SRVKIT HP150/200SRVKIT (Kit includes filter, semi cover packing, casing block, diaphragm and base, hose band)
Rotary QR-0050 QR-0080 QR-0100
L32100-P L32103-P L32103-P
L84196 L84198-P L84198-P
(Kit includes shims, vane kit, gasket)
• Ultra quiet • Ultra energy efficient • Proven technology • Low flow and low pressure
QR-0030 Features & Benefits QR-0050 • Durable QR-0080 • High heat applications • High pressures QR-0100 • Higher air volumes • Bases and covers
Regenerative Air Blowers
Air Blowers (FPZ™) SCL-06 SCL06-PC SCLV3
HiBlow™ HP40 HiBlow™ HP60/80 HiBlow™ HP100/120 HiBlow™ HO150/200
Shuttle
(Kit includes diaphragm and base, head and valve, air cleaner, L-tube)
HP40 HP60/80 HP100/120 HP150/200
Thomas™ 5060 (old style) Thomas™ 5060 Thomas™ 5078S
Repair Kit
Thomas™ 5060 5078S
Linear Air Compressors
FS-14S-100 FS-14S-100 FS-185-125
Features & Benefits SCL-06 SCL06-PC • Durable • Quiet SCLV3 • Proven technology • Long life • High air volume
13
Chlorinator Tablets
Float Switches
CHLOR10 10 pound pail of chlorine tablets
D20N0 – Mercury Float Switch, Wide Angle PM20NO – Mercury Float Switch, Narrow Angle
CHLOR25 25 pound pail of chlorine tablets CHLOR45 45 pound pail of chlorine tablets DE-CHLOR25 25 pound pail of de-chlorine tablets
For use in sewage and many chemical solutions, the UL & cUL listed (for Canada) 8300 float switches are designed for operating pumps through a magnetic starter or contactor to control liquid level in sumps or tanks. Can also be used to operate alarms to indicate high water conditions. The switch is sealed in a solid foam-filled polypropylene shell that is leakproof, shockproof and corrosion resistant. The cord weight is zinc plated cast iron. The hard wire is 18/2 SJOOW and the dependable steel tube switch is rated to 3.0 fla at 115 or 230V.
Junction and Distribution Boxes 3 x 5 x 4 with 1½" Hub and either 3" or 4½" Cord Grips 5 x 7 x 4 with 2" Hub and either 4" or 5½" Cord Grips (Other sizes available, contact Delta for details)
4HD2 4 Hole D-Box with Seals and Plugs 6HD2 6 Hole D-Box with Seals and Plugs 7HD2 7 Hole D-Box with Seals and Plugs
Plastic distribution boxes are complete with seals, flow equalizers and lids.
Basin Accessories 20-RISL 20" Lid 20-RTT 20" Tank Adapter 20-RIS 20" x 6" Riser 24-RISL 24" Lid 24-RTT 24" Tank Adapter
14
AKP10010 Adaptaflex™ Fittings ½" AKP10030 Adaptaflex™ Fittings 1" AKP10035 Adaptaflex™ Fittings 1¼" AKP10070 Adaptaflex™ Fittings 2" AKP10080 Adaptaflex™ Fittings 3" AKP10110 Adaptaflex™ Fittings 4"
Drip Disposal Components Hydraulic Index Valves
Tube Fittings
Fimco™
LT SLIP-600 ½" Lock Slip Tee LTC-600 ½" Lock Slip Coupling LTEL-600 ½" Lock Slip Elbow
1000 Series 1004F-23 Includes cams for 2, 3, or 4 zones 1006F-5 Includes cams for 5 or 6 zones 1008F-7 Includes cams for 7 or 8 zones 2000 Series 2004F-23 Includes cams for 2, 3, or 4 zones 2006F-5 Includes cams for 5 or 6 zones 4000 Series 4004F-23 Includes cams for 2, 3, or 4 zones 4006F-5 Includes cams for 5 or 6 zones K-Rain™ 4000 Series 4402 Cammed for 2 zones 4403 Cammed for 3 zones 4404 Cammed for 4 zones
Pressure Regulators PMR-20MF Pressure Regulator Medium Flow ¾" 20 psi PMR-20HF Pressure Regulator High Flow ¾" 20 psi PMR-25MF Pressure Regulator Medium Flow, 3⁄4" 25 psi PMR-30MF Pressure Regulator Medium Flow, 3⁄4" 30 psi PMR-40MF Pressure Regulator Medium Flow, 3⁄4" 40 psi PMR-40HF Pressure Regulator High Flow, 3⁄4" 40 psi
6000 Series 6402 Cammed for 2 zones 6403 Cammed for 3 zones 6404 Cammed for 4 zones 6605 Cammed for 5 zones 6606 Cammed for 6 zones
Vacuum Release Valve VBK-1 1" Vacuum Breaker
Drip Emitter Tubing–Bioline™ 0.4GPH – Dripper 0.6GPH – Dripper .09GPH – Dripper
Spin Filter
Available in 500 ft. rolls
Drip Emitter Tubing–Geoflow™
G1012 Spin Filters 1", Max 20 GPH G2089 Spin Filters 1½", Max 30 GPH G3000 Spin Filters 2", Max 50 GPH
.5GPH Pressure Compensating, 12" or 24" spacing 1GPH Pressure Compensating, 12" or 24" spacing 1GPH Classic, 12" or 24" spacing
15
Delta Environmental Products™ is dedicated to the manufacturing and marketing of advanced on-site treatment and low pressure sewer systems for wastewater markets worldwide. For additional information, please consult a Delta Environmental Products sales representative. Delta Environmental Products is a part of Pentair Water, a division of Pentair, Inc. Pentair is a diversified operating company headquartered in Minnesota and a global leader in providing innovative products and systems used worldwide in the movement, treatment, storage and enjoyment of water. For additional information regarding Pentair, visit www.pentair.com.
P.O. Box 969 8275 Florida Blvd. Denham Springs, LA 70727 1101 Myers Parkway Ashland, OH 44805
www.deltaenvironmental.com
1-888-DELTA17 (335-8217)
DLE-034 10/09
