Austria WAGO Kontakttechnik GmgH Wien Tel. ++43/1/615 07 80 Fax ++43/1/615 07 75 Belgium WAGO Kontakttechnik Zaventem Tel. ++32/2/7 17 90 90 Fax ++32/2/7 17 90 99 China WAGO ELECTRONIC Co. Ltd. Tianjin Tel. ++86/22/82125854/64/74 Fax ++86/22/82125984

Printed in the United States

Germany WAGO Kontakttechnik Minden Tel. ++0571/887-443 Fax ++0571/887-541

51017274 0888-0832/0000-0147

WAGO Service Worldwide

England WAGO, Ltd. Rugby Tel. ++44/1788/568008 Fax ++44/1788/568050 France WAGO CONTACT SA. Paris Tel. ++33/148172590 Fax ++33/148632520 Italy WAGO ELETTRONICA SRL San Lazzaro di Savena (BO) Tel. ++39/051/625-91-25 Fax ++39/051/625-91-27 Japan WAGO Co. of JAPAN Ltd. Tokyo Tel. ++81/3/3254/8881 Fax ++81/3/3254/8885 Poland WAGO ELWAG sp. z o. o. Wroclaw Tel. ++48/71/33-66-626 Fax ++48/71/33-60-952 Singapore WAGO Electronic Pte. Ltd. Singapur Tel. ++65/2866776 Fax ++65/2842425 Switzerland WAGO CONTACT SA Domdidier Tel. ++65/2866776 Fax ++65/2842425 Mexico WAGO Corporation Tel. 001-800-309-5975 + 52-(55)-26-44-69-16 Fax + 52-(55)-26-44-69-15 Canada WAGO Corporation Tel. 800 / DIN Rail (346-7245) Fax 262 / 255-3232

WAGO Corporation N120 W19129 Freistadt Road Germantown, Wisconsin 53022 Telephone: 800 / DIN Rail (346-7245) Fax: 262 / 255-3232 [email protected] www.wago.us

Ethernet Accessories For the WAGO-I/O-SYSTEM

51190894, 51190895, 51191018 ECO Series - Industrial Unmanaged Ethernet Switch 5 and 8 port

Hardware features:

Ñ 5 or 8 port industrial switch with optional fiber optic port (multimode or singlemode) Ñ Redundant power inputs and surge protection

Ñ UL/CSA, CE and Zone 2 rated for industrial applications Ñ DIN rail or direct panel mount (no extra kit required) Network features:

Ethernet Compliance:

Ñ Support for up to 1024 addresses

Ñ IEEE 802.3u (Fast Ethernet 100Mbps for more recent devices)

Ñ Store and forward wire speed switching - no delays

Ñ IEEE 802.3 (10Mbps Ethernet supports older devices)

Ñ Automatic address learning, aging and migration

Ñ IEEE 802.3x (Full Duplex with Flow Control)

Ñ Full-Duplex operation with flow control (no collisions!) Ñ Auto crossover (MDI/MDIX) and auto polarity Item-No. Description

Pack.-unit pcs

51190894 Industrial Ethernet Switch, 5 RJ45 10/100 Ports 51190895 Industrial Ethernet Switch, 4 RJ45 10/100 Ports & 1 multimode fiber optic port with SC style connector 51191018 Industrial Ethernet Switch, 8 RJ45 10/100 Ports

1 1 1

Power input terminal specifications MCS Series 231 4 pole 2 conductor

Approvals

22-12 AWG Strip length: 9 - 10 mm

1

Electrical safety EMI emissions EMC immunity Hazardous locations Eye safety (fiber models) Packaging material and protection

Technical data 10.12.2007

UL508/CSA C22, EN61010-1 FCC part 15, ICES-003, EN55022 IEC61326-1 UL1604, CSA C22.2/213 (Class 1, Div.2), EN50021/EN60079-15 (Zone 2) IEC60825-1, Class 1, FDA 21 CFR 1040.10 and 1040.11 UL94V0 Lexan and IP30

WAGO Corporation

Technical Data Ethernet switch type Ethernet protocols supported RJ45 ports (shielded) RJ45 speed (10 or 100 Mbps) RJ45 MDI/MDIX and TD/RD Fiber optic port speed Fiber optic port wavelength Fiber multimode (mm) typical Fiber singlemode (sm) typical Fiber max. distance (full duplex) Typ. latency for 100 Mbps ports Fiber duplex operation MAC addresses supported Memory bandwidth Mounting Power input Input power

Intelligent store and forward All IEEE 802.3 10/100 Base TX Auto-negotiation Auto-crossover and auto-polarity 100 BaseFX (100 Mbps) 1300 nm center 50 or 62.5/125 µm (SC or ST) 9 or 10/125 µm (SC or ST) 4 km (mm) 20 (sm) or 40 km (long haul) 5 µs + frame time Varies on load Full duplex 1024 3.2 Gbps DIN rail or direct panel mount Redundant input terminals 2.0 W (5-port without fiber) (typical - all ports active at 100 Mbps) (Max. 6 W) 3.0 W (5-port with 1 fiber) 4.0 W (8-port without fiber) Power input 10-30 VDC Transient protection 15,000 Watts peak Spike protection 5,000 Watts (10 times for 10 µS) Ethernet isolation 1500 VRMS 1 minute Operating temperature range -10° to +60° C Storage temperature range -40° to +85° C Humidity (non-condensing) 5 to 95% RH Vibration IEC68-2-6 Dimensions (L x W x H) 3.95" x 1.0" x 3.26" (5 Port) 3.95" x 1.5" x 3.26" (8 Port)

N120 W19129 Freistadt Road, Germantown, WI 53022 email: [email protected] Ph: 800 DIN Rail (346-7245) Fx: 262.255.3232 www.wago.us

758-500 Industrial Unmanaged 5 Port Ethernet Switch

Features: The WAGO Industrial Ethernet Switch allows for easy installation of the Ethernet network in factory environments. This rugged switch connects to any Ethernet enabled device and provides many industrial features.

Ñ Five Ethernet Ports that are fully IEEE 802.3 complian

Ñ All 10/100 RJ-45 ports are auto-detecting, auto-crossover and auto-polarity

Ñ DIN rail or direct panl mounting (no extra kits required) Ñ Store & forward wire speed switching - no delays

Ñ Full-duplex operation with flow control (no collisions!)

Ñ Ultra-reliable with 1,000,000+ service-free hours (MTBF) Ñ Industrial - 40° to +85° C operating range

Unlike an Ethernet hub, the Ethernet switch does not broadcast messages to all ports. The Ethernet switch remembers which device address is connected to each port and routes messages only to that device. This minimizes data collisions and increases network deterministic behavior. Item-No. Description Ethernet TCP/IP Industrial ethernet switch, 5 port

Pack.-unit pcs

758-500

1



Power input terminal specifications

Series 739 3 pole

Approvals Electrical safety EMI emissions EMC immunity Hazardous locations Marine and off-shore

Technical data 10.12.2007

28-12 AWG Strip length: 8 - 9 mm

1

Technical Data Ethernet switch type Ethernet protocols supported RJ45 ports (shielded) RJ45 speed (10 or 100 Mbps) RJ45 MDI/MDIX and TD/RD Typ. latency for 100 Mbps ports Full or half duplex operation MAC addresses supported Memory bandwidth Power input Transient protection Spike protection Ethernet isolation Operating temperature range Storage temperature range Humidity (non-condensing) Vibration Dimensions (L x W x H)

Intelligent store and forward All IEEE 802.3 10/100 Base TX Auto-negotiation Auto-crossover and auto-polarity 5 µs + frame time Varies on load Yes 1024 3.2 Gbps 10-30 VDC 15,000 Watts peak 5,000 Watts (10 times for 10 µS) 1500 VRMS 1 minute -40° to +85° C -40° to +85° C 5 to 95% RH IEC68-2-6 4.75" x 0.98" x 3.17"

UL508/CSA C22, EN61010-1 FCC part 15, ICES-003, EN55022 IEC61326-1 UL1604, CSA C22.2/213 (Class 1, Div.2), Cenelec EN50021 (Zone 2) DNV (Det Norske Veritas)

WAGO Corporation

N120 W19129 Freistadt Road, Germantown, WI 53022 email: [email protected] Ph: 800 DIN Rail (346-7245) Fx: 262.255.3232 www.wago.us

51186919 WAGO-PROTECT, 10/100 MBs Fast Ethernet Surge Protection

Features: The WAGO Protect 10/100 Mb Ethernet surge suppressor is a high-speed, high-current, solid-state DIN rail mount device designed to protect equipment from transient over-voltages on high-speed data lines with RJ-45 connectors using pins 1-8. It performs this function by limiting the magnitude of transient over-voltages that are present on each pair relative to each other and relative to ground. Continuous bi-polar, bi-directional, non-interrupting protection is provided. The device utlizes silicon junction avalanche suppressor diodes as its suppression technology and automatically resets after each suppression function with no degradation of protection capabilities. It attaches in series with the load to be protected. Item-No. Description WAGO-PROTECT 10/100 Mbs fast ethernet surge protection

51186919

Pack.-unit pcs 1



Technical data 10.12.2007

WAGO Corporation

Technical Data Electrical Service Max. continuing operating voltage Connector type Protected RJ-45 pins Electrical Performance Clamping voltage Max. voltage protection level (10/1000s) Response time (max.) Attenuation Max. leakage current Environmental Operating and storage temperature Relative Humidity Installation Mounting Wiring Mechanical Dimensions Weight UL material flame rating

7.5 V Peak RJ-45 All pins 12 V 25 Vp @ 100 A