Volute casing pumps ZLND 32 - 125 ... 300 - 500 (SIHISuperNova Programme)

TECHNICAL DATA Flow: Head: Speed: Material: Temperature: Casing Pressure: Shaft sealing: Flange connections: Direction of rotation:

max. 1800 m³/h max. 140 m max. 3600 rpm cast iron (0B,0C,0E) and stainless steel (4B) max. 170 ºC depending on the shaft sealing and material execution. material design 4B PN 16 0B, 0C, 0E PN 16 / 101) / 142) mechanical seal or stuffing box material design 4B DIN 2501 PN 16 0B, 0C, 0E DIN 2501 PN 16 / 103) clockwise when looking at the pump from the drive end.

APPLICATION Volute casing pumps of the ZLN range (meeting DIN 24255 / EN 733 and ISO 9908) are used when clear or turbid liquids free from solid particles are to be pumped. Application areas for pumps in this range include: Automobile, mechanical and general engineering industries Food and beverage industry Pharmaceutical industry Paint industry Plastic and rubber industry Iron and non-ferrous metal industry Paper and pulp industry Textile industry Building and construction industry Heating and air conditioning Drainage Water supply Irrigation A range of materials is available to meet the specific needs of customers. For applications not covered by this pump range we offer the ISOchem range. DESIGN Horizontal, single-stage volute casing pumps with connections and main dimensions to DIN 24255 / EN 733, plus 19 additional sizes. The design of the pump allows the complete drive unit to be withdrawn from the casing without disturbing the attached pipe work. If a spacer type coupling is used, it is also unnecessary to disconnect the motor. The range covers 50 sizes with only 5 different bearing brackets. CONSTRUCTION Casing pressure: Material 4B:

max 16 bar from - 40 °C to +120 °C max 14 bar from 120ºC up to +170 °C Material 0B, 0C, 0E: max 16/101)/142) bar from - 20 °C to +120 °C max 14/91)/82) bar from 120 ºC up to +170 °C Max. casing pressure= inlet pressure + delivery head at zero flow Please note: The relevant technical regulations and safety rules must be observed. Flanges location: Axial suction flange, discharge flange radially upwards.

Tech_cat_ZLND_Eng_97.doc

Flanges: Material design 4B: Complies with DIN 2543 PN 16 Material design 0B, 0C, 0E: DIN 2533 PN 16 / 2532 PN 103) Flanges drilled according to ANSI 150 can be supplied. Bearings: Bearing brackets 25, 35 and 45: Two ball bearings, lifetime greased (2Z), design code B, or oil lubrication, design code C. Bearing brackets 55 and 65: One double row angular contact bearing on pump side, plus one ball bearing on drive side, grease lubricated S or oil lubricated T. Oil lubrication configurations with CLO (Constant Level Oiler) can be supplied. Shaft sealing: Shaft sealing either by stuffing box or mechanical seal. Code 041: Self-sealed, uncooled packing rings Code 052: Uncooled packing rings, external sealing liquid Code AF3: Balanced mechanical seal, seal face materials SiC/Carbon, elastomer EPDM Code BJ3: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer EPDM Code C23: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer EPDM Code AFS: Balanced mechanical seal, seal face materials SiC/ SiC, elastomer FPM (Viton) Code BJS: Unbalanced bellows mechanical seal, seal face materials SiC/ SiC, elastomer FPM (Viton) Code C2S: Unbalanced bellows mechanical seal, seal face materials SiC/ SiC, elastomer FPM (Viton) Code AFK: Balanced mechanical seal, seal face materials SiC/carbon, elastomer FPM (Viton) double PTFE (Teflon) wrapped Code BJJ: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer FPM (Viton) Code C2J: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer FPM (Viton) Codes AX3, AXS, AXK: are equivalent to AF3, AFS, AFK plus quench Codes AY3, AYS, AYK: are equivalent to AF3, AFS, AFK plus heating Codes A93, A9S, A9K: are equivalent to AF3, AFS, AFK plus external flushing As an option, Code 051 (as 052, but with inlet and outlet) and other sealing execution can be supplied on request. 1)

From 80-400 to 300-500 except 150-500 150-500 3) 150-200, 150-250 and 200-250 2)

12/09/01

Material design: Item

Component Mat. Nº

10.20

16.10

Volute casing

Casing cover

21.00

Shaft

23.00

Impeller

33.00 52.30 52.40 46.10 43.30

Bearing bracket Shaft sleeve / Mechanical seal Shaft sleeve / Stuffing box Shaft seal / Stuffing box Mechanical seal

Material ISO EN denomination

DIN denomination

US Material ASTM Standard A 278 Cl. 30 A 351 CF8M

0B AISI

EN-JL 1040 1.4408

GG-25 GX6CrNiMo18 10

EN-GJL 250 GX5CrNiMo19-11-2

EN-JL 1040 1.4408 1.0503 1.4021 1.4401 EN-JL 1040 2.1050 1.4408

GG-25 GX6CrNiMo18 10 C 45 X 20 Cr13 X5CrNiMo17 12 2 GG-25 G-CuSn10 GX6CrNiMo18 10

EN-GJL 250 GX5CrNiMo19-11-2 C 45 X 20 Cr13 X5CrNiMo17 12 2 EN-GJL 250 GX5CrNiMo19-11-2

A A A A A A B A

EN-JL 1040 1.4021

GG-25 X 20 Cr13

EN-GJL 250 X 20 Cr13

A 278 Cl. 30 A 276 Type 420

420

1.4021 1.4401

X 20 Cr13 X5CrNiMo17 12 2

A 276 Type 420 A 167 Gr316

420 316

X 20 Cr13 X5CrNiMo17 12 2 Soft packing

278 Cl. 30 351 CF8M 576 Gr1045 276 Type 420 167 Gr316 278 Cl. 30 427 C91600 351 CF8M

Construction 0C 0E 4B

x

x

x

316

316 1045 420 316

x x

x

x

x(*) x

x(*) x

x(*) x

x

x x x

316

Silicon Carbide / Carbon EPDM or Viton ( See other options )

x

x x

x x

x x

x x

x

x

x

x

x

x

x x

x

x

x

x

(*) Only in bearing brackets 55 and 65. Casing gasket: The casing is sealed by means of a confined flat gasket of EWP 210 material. Code of this design: 2 The casing is sealed by means of a confined flat gasket of PTFE. Code of this design: 4 Motor Power: Using commercial electric motors, type of construction IM B3. To determine the drive power we recommend the following safety margin: Up to 4 kW: 25% 4 to 7,5 kW: 20% The following speeds must not be exceeded: Size 32125 32160 32200 40125 40160 40200 50125 50160 50200 65125 65160 652001) 801601) 80200 100160 100200

max. speed rpm

3600

Size

max. speed

Size

rpm

32250 40250 50250 65250 80250 1002502) 1252002)

403153) 503153) 65315 80315 80400 100315 100400 125250 125315 125400 150200 1502504) 150315 150400 200250

3000

above 7,5 kW: 15%

max. speed

Size

rpm

1800

150500 200315 200400 200500 250300 250315 250400 250500 300400 300500

1)

In material design 4B max. speed 3000 rpm

2)

In material design 4B max. speed 1800 rpm

3)

In material design 0E, and 4B max. speed 3000 rpm

4)

In material design 4B max. speed 1500 rpm

max. speed rpm

1500

The max. speeds are derived from the permissible shaft loads and the permissible peripheral speeds of the impellers Bearing bracket / pump size: Bracket 25

32125 32160 32200 32250 40125 40160 40200 40250 50125 50160 50200 50250 65125 65160 65200 80160

Bracket 35

40315 50315 65250 65315 80200 80250 80315 100160 100200 100250 100315 125200 125250 150200 150250

Bracket 45

80400 100400 125315 125400 150315 150400 200250

Bracket 55

150500 200315 200400 200500 250300 250315

Bracket 65

250400 250500 300400 300500

General comments: For horizontal volute pumps in CLOSE COUPLED construction with STANDARD motor for nominal performances and flange connections as per EN 733 refer to our series ZLK. For INLINE pumps with the same drive unit, consisting of bearing bracket with bearing, stub shaft and mechanical seal, casing cover, impeller and impeller nut, refer to our series ZLI (supplied also with magnetic drive). For equipping hot media systems a complete programme is available for a flow range between 1-1000 m3 /h consisting of the range: ZTN volute pumps to EN 733 design with base plate, tmax 350 °C PN 16. Heat transfer oil. ZTK volute pumps to EN 733 close coupled design, tmax 350 °C PN 16. Heat transfer oil. ZTI volute pumps to EN 733 as INLINE construction, tmax 3500 C PN 16. Heat transfer oil. ZEN volute pumps to EN 22858, tmax 230 °C PN 40. Hot water design. ZDN volute pumps to EN 22858, tmax 185 °C PN 25. Hot water design. ZHN volute pumps to EN 733, tmax 180 °C PN 16. Hot water design. ZLI volute pumps to EN 733 as INLINE construction, tmax 150 °C PN 25. Hot water design.

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

SECTIONAL DRAWING AND NOMENCLATURE

Mechanical seal BJ3

Bearing brackets 25, 35 and 45

Stuffing Box 041

10.20 16.10 18.30 21.00

volute casing casing cover support foot shaft

23.00 32.10 33.00

impeller ball bearing bearing bracket

Designs are subject to amendment without prior notice.

43.30 46.10 52.40

mechanical seal stuffing box shaft sleeve (stuffing box)

© (Sterling Fluid Systems BV) 2001

SECTIONAL DRAWING AND NOMENCLATURE

Stuffing Box 041

Bearing brackets 55 and 65. Mechanical seal BJ3

10.20 16.10 18.30 21.00

volute casing casing cover support foot shaft

23.00 32.10 32.11 33.00

impeller ball bearing ball bearing bearing bracket

Designs are subject to amendment without prior notice.

43.30 46.10 52.30 52.40

mechanical seal stuffing box shaft sleeve (mechanical seal) shaft sleeve (stuffing box)

© (Sterling Fluid Systems BV) 2001

Performance Graph

n = 1450 rpm 10

20

10

40

20

40

60 60

80

100

200

80 100

400

200

400

600 800 1000 600 800 1000

1500 2000

1500 2000

3000

Imp.gal./min

3000 4000

US gal./min

100 300 80 150-500

H [m]

250300-500 500

200-500

250

60

200

50 80-400

40

100-400

30 40-315

65315

50-315

80315

125400

150400

150

200400 250400

100315

125315

150315

100250

125250

150-250

200315

250315

H [ft]

100 300400

80

20 40250

32-250

32200B

32-200A

50-250

40200

65-250

50200

65200

80250 80200

32160B

40

100200

10 32-160A

60

125200

40160

250300

150200

200250 30

65- 80160 160

50-160

20

100160

5 32-125

4

40-125

50-125

65-125

3

10

2 2

3

4

5

10

20

30

40

50

100

200

300

400

500

1000

2000

Q [m³/h]

n = 2900 rpm

H [m]

H [ft]

Q [m³/h]

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

Performance Graph

n = 1750 rpm

H [m]

H [ft]

Q [m³/h]

n = 3500 rpm

H [m]

H [ft]

Q [m³/h]

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

Table of Dimensions

All dimensions in mm Size 32125 32160 32200 1) 32250 40125 40160 40200 40250 1) 40315 50125 50160 50200 50250 1) 50315 65125 65160 65200 65250 65315 80160 80200 80250 80315 1) 80400 1) 100160 100200 100250 100315 100400 1) 125200 125250 125315 125400 1) 150200 1) 150250 150315 150400 1) 200250

BB 25 25 25 25 25 25 25 25 35 25 25 25 25 35 25 25 25 35 35 25 35 35 35 45 35 35 35 35 45 35 35 45 45 35 35 45 45 45

DN 2 32 32 32 32 40 40 40 40 40 50 50 50 50 50 65 65 65 65 65 80 80 80 80 80 100 100 100 100 100 125 125 125 125 150 150 150 150 200

Pump dimensions DN 1 a f h1 50 80 360 112 50 80 360 132 50 80 360 160 50 100 360 180 65 80 360 112 65 80 360 132 65 100 360 160 65 100 360 180 65 125 470 225 65 100 360 132 65 100 360 160 65 100 360 160 65 100 360 180 65 125 470 225 80 100 360 160 80 100 360 160 80 100 360 180 80 100 470 200 80 125 470 225 100 125 360 180 100 125 470 180 100 125 470 200 100 125 470 250 125 125 530 280 125 125 470 200 125 125 470 200 125 140 470 225 125 140 470 250 125 140 530 280 150 140 470 250 150 140 470 250 150 140 530 280 150 140 530 315 200 160 470 280 200 160 470 280 200 160 530 280 200 160 530 315 200 160 590 280

h2 140 160 180 225 140 160 180 225 250 160 180 200 225 280 180 200 225 250 280 225 250 280 315 355 280 280 280 315 355 315 355 355 400 400 400 400 450 400

b 50 50 50 65 50 50 50 65 65 50 50 50 65 65 65 65 65 80 80 65 65 80 80 80 80 80 80 80 100 80 80 100 100 100 100 100 100 100

c 15 15 15 15 15 15 15 15 18 15 15 15 15 17 15 15 15 15 18 15 15 18 18 18 18 18 18 18 18 18 18 18 18 20 20 18 18 22

m1 100 100 100 125 100 100 100 125 125 100 100 100 125 125 125 125 125 160 160 125 125 160 160 160 160 160 160 160 200 160 160 200 200 200 200 200 200 200

Foot dimensions m2 n1 n2 70 190 140 70 240 190 70 240 190 95 320 250 70 210 160 70 240 190 70 265 212 95 320 250 95 345 280 70 240 190 70 265 212 70 265 212 95 320 250 95 345 280 95 280 212 95 280 212 95 320 250 120 360 280 120 400 315 95 320 250 95 345 280 120 400 315 120 400 315 120 435 355 120 360 280 120 360 280 120 400 315 120 400 315 150 500 400 120 400 315 120 400 315 150 500 400 150 500 400 150 550 450 150 500 400 150 550 450 150 550 450 150 500 400

s1* M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M16 M16 M12 M12 M16 M16 M16 M16 M16 M16 M16 M20 M16 M16 M20 M20 M20 M20 M20 M20 M20

s2* M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12

w 260 260 260 260 260 260 260 260 340 260 260 260 260 340 260 260 260 340 340 260 340 340 340 370 340 340 340 340 370 340 340 370 370 340 340 370 370 430

x 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 180

d1 24 24 24 24 24 24 24 24 32 24 24 24 24 32 24 24 24 32 32 24 32 32 32 42 32 32 32 32 42 32 32 42 42 32 32 42 42 42

Shaft end l 50 50 50 50 50 50 50 50 80 50 50 50 50 80 50 50 50 80 80 50 80 80 80 110 80 80 80 80 110 80 80 110 110 80 80 110 110 110

t 27 27 27 27 27 27 27 27 35 27 27 27 27 35 27 27 27 35 35 27 35 35 35 45 35 35 35 35 45 35 35 45 45 35 35 45 45 45

u 8 8 8 8 8 8 8 8 10 8 8 8 8 10 8 8 8 10 10 8 10 10 10 12 10 10 10 10 12 10 10 12 12 10 10 12 12 12

1) Transnorm pump sizes, not included in DIN 24255 / EN 733. Flanges drilled according to ANSI 150 on request. * Slots suitable for bolts with dimensions indicated. Bolts are not included in the bare shaft pump standard scope of supply.

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

Table of Dimensions

All dimensions in mm Size

BB 1)

150500 1) 200315 1) 200400 1) 200500 1) 250300 1) 250315 1) 250400 1) 250500 1) 300400 1) 300500

55 55 55 55 55 55 65 65 65 65

DN 2 150 200 200 200 250 250 250 250 300 300

Pump dimensions DN 1 a f h1 200 180 670 400 250 200 670 355 250 180 670 355 250 200 670 425 300 305 655 425 300 250 670 375 300 250 720 400 300 250 720 450 350 300 720 425 350 300 720 480

h2 500 450 500 560 550 560 600 670 670 670

b 100 100 100 100 120 120 120 120 120 140

c 22 22 22 22 28 28 29 32 30 32

m1 200 200 200 200 240 240 240 240 250 250

Foot dimensions m2 n1 n2 150 640 540 150 550 450 150 550 450 150 660 560 190 700 600 190 620 520 190 700 600 190 750 650 190 760 660 190 840 720

s1* M20 M20 M20 M20 M20 M20 M20 M20 M24 M24

s2* M16 M16 M16 M16 M16 M16 M16 M16 M16 M16

w 489 489 489 489 474 489 508 503 508 508

x 180 180 180 180 180 180 180 180 180 180

Shaft end d1 l t 50 115 53.5 50 115 53.5 50 115 53.5 50 115 53.5 50 115 53.5 50 115 53.5 2) 60 145 64 2) 60 145 64 2) 60 145 64 2) 60 145 64

u 14 14 14 14 14 14 18 18 18 18

1)

Transnorm pump sizes, not included in DIN 24255 / EN 733. Flanges drilled according to ANSI 150 on request. For these sizes the clearance corresponds to M6. * Slots suitable for bolts with dimensions indicated. Bolts are not included in the bare shaft pump standard scope of supply. 2)

Flange connections to DIN 2501 PN 16 DN 2/DN 1

32

40

D 140 150 k 100 110 d2 x number 18x4 18x4

50

65

80

165 185 200 125 145 160 18x4 18x4 18x8

100

125

220 180 18x8

250 210 18x8

150

200

285 340 240 295 22x8 22x12

Designs are subject to amendment without prior notice.

DIN 2501 PN 10 250

300

350

400

100

125

150

200

405 355 26x12

460 410 26x12

520 470 26x16

580 525 30x16

220 180 18x8

250 210 18x8

285 240 22x8

340 295 22x8

© (Sterling Fluid Systems BV) 2001

Connections for bearing brackets 25, 35 and 45 Only for Impellers ∅125

1)

um1 : Pressure gauge. Only available on request um2 : Pressure gauge. Only available on request ue : Drainage ueo : Oil drainage uio : Constant level oiler ufo : Oil filling uAL : Drainage for leakage. Threaded hole only available on request us : Sensor Size 1)

32125 32160 32200 32250 1) 40125 40160 40200 40250 40315 1) 50125 50160 50200 50250 50315 1) 65125 65160 65200 65250 65315 80160 80200 80250 80315 80400 100160 100200 100250 100315 100400 125200 125250 125315 125400 150200 150250 150315 150400 200250

um1

um2 ue

ueo

uio

uf o

uAL

us

uk1 uk2 uk3 uk4 uk5 uk6 uk7 uk8

uk1

uk2 uk3

: Quench Inlet : Heating Inlet : 051 Inlet (Stuffing box) : 052 External sealing (Stuffing box) : External Flushing : Quench Outlet : Heating Outlet : 051 Outlet (Stuffing box)

uk4

uk5

uk6 uk7

uk8

G1/4

G1/8

G1/4

G3/8

G1/4

∅15.65

∅13

M8 G1/4 G1/8 G1/4 G1/8 G1/4 G1/8 G1/4

Certain construction sizes do not correspond in all details to the drawing.

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

Connections for bearing brackets 55 and 65.

um1 : Self sealing connection um2 : Pressure/vacuum gauge. Only available on request ue : Drainage ueo : Oil drainage uio : Constant level oiler ufo : Oil filling uAL : Drainage for leakage

Size 150500 200315 200400 200500 250300 250315 250400 250500 300400 300500

um1

G1/4

um2

G1/2

ue

G1/2

ueo

G1/4

uio

G1/4

uf o

∅20

Designs are subject to amendment without prior notice.

um3 : uk3 : uk4 : uk8 : umo : uk9 :

uAL

G1/2

um3

G1/2

uk3

G1/4

Pressure gauge connection 051 Inlet (Stuffing box) 052 External sealing (Stuffing box) 051 Outlet (Stuffing box) Oil level control 041 inlet (Stuffing box)

uk4

G1/4

uk8

G1/4

umo

G3/4

uk9

G1/4

© (Sterling Fluid Systems BV) 2001

Foundation plan, bearing brackets 25, 35 and 45.

Dimensions in mm Tolerances for welded parts acc. to DIN 8570 B Size

32-125 32-160 32-200

32-250

40-125

40-160

40-200

40-250

40-315

50-125

50-160

50-200

50-250

50-315 65-125 65-160

Motor size 71 71 80 80 80 90S 80 90S 90L 100L 71 80 71 80 80 90S 80 80 90S 90L 90S 90L 100L 100L 100L 100L 112M 132S 71 80 80 80 80 90S 80 90S 90L 100L 90L 100L 100L 112M 112M 132S 132M 80 80 80 90L 100L

kW 0.25 0.37 0.55 0.55 0.75 1.10 0.75 1.10 1.50 2.20 0.37 0.55 0.37 0.55 0.75 1.10 0.55 0.75 1.10 1.50 1.10 1.50 2.20 3.00 2.20 3.00 4.00 5.50 0.37 0.55 0.75 0.55 0.75 1.10 0.75 1.10 1.50 2.20 1.50 2.20 3.00 4.00 4.00 5.50 7.50 0.55 0.75 0.75 1.50 2.20

Base plate

Cplg.

No. S241

pump 31 33

S301 B68

S383

34

46 B80

S241

28

30 S301

B68

36

46 S383 B80 73 S434

B95 30

B68

36

S301 40 S342

B80 B68 50 B80

S383 S434

B95

88 33

B68 S342 39 B80

n = 1450 rpm

Weight kg unit 50 65 67 68 70 73 103 106 109 119 60 62 62 64 66 69 75 77 80 83 106 109 119 121 147 150 155 171 62 64 66 75 77 80 81 84 87 97 114 123 125 131 171 186 198 80 82 88 95 104

Rag bolt DN 2

DN 1

a

b2

e1

e2

330

480

290

390

480

350

80 32

v

h3

h4

w*

177 197

317 357

60

225

405

75

260

485

177

317

197

357

683 683 717 717 717 775 737 795 795 836 683 717 683 717 717 775 737 737 795 795 795 795 836 836 971 971 992 1068 703 737 737 737 737 795 737 795 795 836 795 836 836 857 992 1068 1094 737 737 737 795 836

125

50

100

f1

490

600

330

440

160

290

80 125 390

40

480

350

60

65

225

405

260

485

100

490

600

440

160

75

125

305 540

660

490

555

170 197

357

405 100

390

480

350

125

60

225 425

50

65 450

125

540

400

140

490

600

440

160

540

660

490

170

240

440

260

485

75 305

585 420

65

80

Designs are subject to amendment without prior notice.

100

450

540

400

140

60

240 440

w1

730

M16x200

920

M20x400

M16x200 730

920

M20x400

1000

730 M16x200

820

920

M20x400

1000

820

M20x400

© (Sterling Fluid Systems BV) 2001

Size

65-200

65-250

65-315

80-160

80-200

80-250

80-315

80-400

100-160

100-200

100-250

100-315

100-400

125-200

125-250

125-315

125-400

150-200

150-250

Motor size 90S 90L 100L 100L 112M 100L 100L 112M 132S 132S 132M 160M 160L 80 90S 90L 100L 100L 90L 100L 100L 112M 132S 100L 112M 132S 132M 132S 132M 160M 160L 160M 160L 180M 180L 200L 100L 100L 112M 132S 100L 100L 112M 132S 132M 112M 132S 132M 160M 160M 160L 180M 180L 160L 180M 180L 200L 225S 225M 132M 160M 160L 132M 160M 160L 160L 180M 180L 200L 225S 200L 225S 225M 250M 280S

kW 1.10 1.50 2.20 3.00 4.00 2.20 3.00 4.00 5.50 5.50 7.50 11.00 15.00 0.75 1.10 1.50 2.20 3.00 1.50 2.20 3.00 4.00 5.50 3.00 4.00 5.50 7.50 5.50 7.50 11.00 15.00 11.00 15.00 18.50 22.00 30.00 2.20 3.00 4.00 5.50 2.20 3.00 4.00 5.50 7.50 4.00 5.50 7.50 11.00 11.00 15.00 18.50 22.00 15.00 18.50 22.00 30.00 37.00 45.00 7.50 11.00 15.00 7.50 11.00 15.00 15.00 18.50 22.00 30.00 37.00 30.00 37.00 45.00 55.00 75.00

132M 160M 160L 180M 160L 180M 180L 200L

7.50 11.00 15.00 18.50 15.00 18.50 22.00 30.00

Base plate

Cplg.

No.

Weight kg pump

B68 S383

45 B80

S434

70

B95 S605 S486

92 B110 B68 43

S383

B80 60

S434

B95 B80 75

S605

B95 95 B110 B95

S486

B110

143

B125 S434

B80

S605

B95

S434

78

B80 70 B95 B80

S605

85 B95

S486

B110

S606

B125 B95 B110

S607

B125 B140

S605

B95

104

177

100 S486 S605

B110 B95

S486

B110 B95 B110

102

S606

151 S607 S606

B125 B140 B125 B140

S607 180x73 x14 S605

188 B160 B180 B95 123

S606

B110

S607

B125 B140

128

unit 105 108 118 120 125 158 160 165 181 236 247 268 288 100 103 106 116 118 125 134 136 141 157 197 202 218 230 239 251 272 291 322 340 361 376 424 166 169 174 190 158 160 165 181 193 213 228 240 261 281 300 320 337 402 423 438 486 548 569 256 277 296 258 279 298 375 396 411 459 520 498 559 580 793 1047 295 316 335 355 340 360 389 436

Rag bolt DN 2

DN 1

a

b2

490

e1

600

e2

440

v

160

f1

75

h3

260

h4

485

100 65

80 540

660

490

170 90

125

730

740

670

190

610

840

550

205

280

530

300

550

325

605

485

490

600

440

160

75

260 510

80

100 540

660

490

170 300

125

730

740

670

190

90 350

80

125

580

665

610

840

550

205

380

735

540

660

490

170

280

560

730

740

670

190

300

580

540

660

490

170

280

560

125

300 90 100

125

140

730

740

670

190

610

840

550

205

730

670 940

730

740

110

325

605

350

665

380

735

230 670

190 665

610 730

840 740

550 670

205 190

90

350 705

610

550 840

125

150

140

205

730

380

735

110 940 840

670

940 1460

230 680

740

150

200

Designs are subject to amendment without prior notice.

160

730

840

940

230 205

170

200

415

815

455

855

190

670

205

230

110

380

780

w* 795 795 836 836 857 946 946 967 1043 1068 1094 1186 1248 762 820 820 861 861 930 971 971 992 1068 971 992 1068 1094 1068 1094 1186 1248 1247 1247 1371 1371 1429 971 971 992 1068 971 971 992 1068 1094 1007 1083 1109 1201 1201 1263 1325 1325 1262 1386 1386 1444 1481 1481 1109 1201 1263 1109 1201 1263 1262 1386 1386 1444 1481 1444 1481 1481 1604 1679 1129 1221 1283 1345 1283 1345 1345 1403

w1

920 M20x400 1000

1120 M24x400 1250

920

M20x400

1000

1120

M24x400 1250

1000

M20x400

1120

M24x400

1000

M20x400

1120

M24x400 1250

1400 1120 1250 1120

1250 M24x400 1400 1250 1400 1800

M16x200

1120

1250

M24x400

1400

© (Sterling Fluid Systems BV) 2001

Size

150-315

150-400

200-250

Motor size 180L 200L 225S 225M 250M 225M 250M 280S 280M 160L 180M 180L 200L

kW 22.00 30.00 37.00 45.00 55.00 45.00 55.00 75.00 90.00 15.00 18.50 22.00 30.00

Base plate No. S606

S607

Cplg.

Weight kg pump

B110 B125 B140

180x73x14

B160 B140 B160 B180

S607

B95 B110 B125

170

205

230

unit 431 479 540 561 774 598 811 1065 1117 471 492 507 555

Rag bolt DN 2

DN 1

a

b2

e1

e2

v

f1

h3

h4

840

150

200

200

200

160

160

730

730

940

670

230

380

780

415

865

110

1460

680

170

200

455

905

940

670

230

185

380

780

w*

w1

1406 1464 1501 1501 1624 1501 1624 1699 1699 1342 1466 1466 1524

1250

1400

M24x400

1800

M16x200

1400

M24x400

* Motor protection type IP 55, dimensions depend on the motor manufacturer. Dimension listed are taken from the SIEMENS catalogue.

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

Foundation plan, bearing brackets 55 and 65.

Dimensions in mm Tolerances for welded parts acc. to DIN 8570 B Size

150-500

200-315

200-400

200-500

Motor size kW 180L 22 200L 30 225S 37 225M 45 250M 55 280S 75 280M 90 315S 110 315M 132 315L 160 315L 200 315 250 180L 22 200L 30 225S 37 225M 45 250M 55 280S 75 180L 22 200L 30 225S 37 225M 45 250M 55 280S 75 280M 90 315S 110 315M 132 315L 160 315L 200 315 250 225M 45 250M 55 280S 75 280M 90 315S 110 315M 132 315L 160 315L 200 315 250 315 315 355 355

Base plate

Cplg.

No.

pump

167x81x12 174x82x14

B125

178x82x14

B140

190x82x14

B160 B180

198x82x14

335

212x83x16 226x83x16

B200

238x87x16

B225 B125

169x72x12 176x73x14 180x73x14

B140

192x73x14

B160 B180 B125

200x74x14 167x72x12

310

174x73x14 178x73x14 190x73x14 198x74x14

B140 B160 B180 340

212x82x16 226x82x16

B200

238x87x16

B225 B140 B160 B180

180x84x14 192x84x14 200x84x14

395

214x85x16 228x85x16

B200

240x87x16

B225 B250

264x98x18

n = 1450 rpm

Weight kg unit 674 754 817 845 955 1136 1186 1397 1477 1635 1775 1605 659 712 777 805 915 1095 666 742 807 835 945 1125 1175 1400 1480 1635 1775 1610 915 1025 1205 1255 1465 1545 1700 1840 1665 1865 1965

Rag bolt DN 2

DN 1

a

b2

v

e1

e2

v2

f1

h3

h4

w*

w1

810

170 170 170 170 190 190 190 210 210 230 230 230 170 170 190 190 190 210 170 170 170 170 190 190 190 210 210 230 230 230 190 190 210 210 210 210 230 230 250 250 270

1330 1400 1440

760

665 700 720

235

550

1050

1670 1740 1780

240

570

1070

1566 1624 1661 1661 1784 1859 1859 1994 1994 2134 2134 2254 1586 1644 1681 1681 1804 1879 1566 1624 1661 1661 1784 1859 1859 1994 1994 2134 2134 2254 1681 1804 1879 1879 2014 2014 2154 2154 2274 2274 2499

820 150

200

180

830

870 720 200

730

740 720 730

740 180 200

250

820

870 840

200 850

870 980

1520 1600

770

760 800

1700

850

1800

900

1920 1350 1420 1420

810 670 680

960 675 710 710

245

590

1090

255

505

955

260 1540 1580 1330 1400 1440 1520 1600

690 670 680

690

1700

770 790 665 700 720

525

975

235

505

1005

240

525

1025

760 800 850

760 1800 1920 1420 1540 1580

900 810

960 710 770 790

245

260

545

595

1045

1155

790 1720

860

1820

910

1900

810

950

2100

920

1050

265

270

615

635

1175

1196

M16x200 1900 1980 2120 2260 2380 1690 1760 1800 1920 2000 1670 1740 1780

M18x200

M16x200

M16x200

1900 1980 2120 2260 2380 1800 1920 2000

M18x200

M16x200

2140 2280 M18x200 2400 2640

* Motor protection type IP 55, dimensions depend on the motor manufacturer. Dimensions listed are taken from the SIEMENS catalogue.

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

Size

250-300

250-315

250-400

250-500

300-400

300-500

Motor

Base plate

size 225S 225M 250M 280S

kW 37 45 55 75

200L 225S 225M 250M 280S 280M 315S 315M 225S 225M 250M 280S 280M 315S 315M 315L 315L 315 315 355

30 37 45 55 75 90 110 132 37 45 55 75 90 110 132 160 200 250 315 355

181x80x14

280S 280M 315S 315M 315L 315L 315 315 355 355 225M 250M 280S 280M 315S 315M 315L 315L 315 315 355 355

75 90 110 132 160 200 250 315 355 400 45 55 75 90 110 132 160 200 250 315 355 400

210x93x14

225M 250M 280S 280M 315S 315M 315L 315L 315 315 355 355 355 400 400 400

45 55 75 90 110 132 160 200 250 315 355 400 500 560 630 710

Cplg.

No.

Weight kg pump

189x88x14

B140

201x88x14

B160 B180

416 209x88x14 185x80x14

B125 B140

205x80x14

B160 B180

219x82x16

B200

190x88x14

B140

202x88x14

B160 B180

197x80x14

210x88x14

424

464

224x89x16

B200 238x89x16 250x89x16

B225 B250

274x98x18

B180

224x94x16 238x94x16

B200

250x94x16

B225

274x98x18

B250

195x94x14

B140 B160 B180

207x94x14 215x94x14

589

229x95x16 243x95x16

B200 620

255x95x16

B225

279x98x18

B250

195x102x14

B140 B160 B180

207x102x14 215x102x14 229x103x16 243x103x16

B200

255x103x16

B225 B250

279x104x18

B280 299x106x18

A315

800

unit 894 922 1037 1217 842 902 930 1045 1225 1275 1485 1565 958 985 1095 1275 1325 1540 1620 1775 1915 1735 2135 2040

Rag bolt DN 2

DN 1

305

b2 880

800 250

820

250

300

880

250 890

980

1407 1456 1671 1755 1910 2050 1860 2160 2165 2205 1150 1260 1442 1491 1701 1785 1945 2085 1892 2191 2196 2240 1270 1477 1655 1711 1925 2007 2170 2313 2725 2939 3372 3474 3689 4302 4524 4728

a

930

250 940

980

940

300

950

980 300

350 1020

300

1030

1040

1060

v

e1

190 190 210 210

1510

e2

v2

1590 1670

795 835

190 190 190 190 210 210 210 210 190 190 210 210 210 230 230 230 230 250 250 270

1430 1470

715 735

1100

320

610

1210

210 210 230 230 230 230 250 250 270 270 190 210 210 210 230 230 250 250 250 250 270 270

1680

840

310

620

1290

1780

890

190 210 210 210 230 230 250 250 250 250 270 270 270 290 290 290

1570 1650 1730

830

365

750 1590 1630 1770

f1

h3

h4

755

310

595

545

1145

1105

795 815 760

885

1520

760

1600 1680

800 840

315

310

565

570

1125

1170

830 1780

890

1920

960

2000

1000

2200

1920

920

880

315

2200

920

890

1930

1310

1100

320

660

1330

785 825 865

360

595

1265

915 965 365

2050 2250

640

1000

1570 1650 1730 1830

1190

960 315

2000

590

615

1285

1025 920

1830

1125

370

635

1305

785 825 865

360

650

1320

915 970

1930

965

2050

1025

2250

980

365

1000

1340

1125 370

2410

670

1205

690

1360

w*

w1

1771 1771 1894 1969

1890 1890 2010 2090

1694 1731 1731 1854 1929 1929 2064 2064 1781 1781 1904 1979 1979 2114 2114 2254 2254 2374 2374 2599

1810 1850

1979 1979 2114 2114 2254 2254 2374 2374 2599 2599 1831 1954 2029 2029 2164 2164 2304 2304 2424 2424 2649 2649

2100

1831 1954 2029 2029 2164 2164 2304 2304 2424 2424 2649 2649 2649 2849 2849 2849

1950 2070 2150

M16x200

M16x200 1970 2050 2190

M18x200

1900 2020 2100

M16x200

2240 2380

M18x200

2500 2740 M16x200

2240 2380

M18x200

2500 2740 1950 2070 2150

M16x200

2290 2430 M18x200 2550 2790

M16x200

2290 2430 2550

M18x200

2790

2990

* Motor protection type IP 55, dimensions depend on the motor manufacturer. Dimensions listed are taken the SIEMENS catalogue.

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

Foundation plan, bearing brackets 25,35 and 45

Dimensions in mm Tolerances for welded parts acc. to DIN 8570 B Size

32-125

32-160

32-200

32-250

40-125

40-160

40-200

40-250

50-125

50-160

Motor size 71 80 80 90S 90L 90S 90L 100L 112M 90L 100L 112M 132S 132S 132S 160M 160M 80 90S 90L 100L 90S 90L 100L 112M 132S 100L 112M 132S 132S 160M 132S 160M 160M 160L 90S 90L 132S 90L 100L 112M 132S 132S 160M

kW 0.55 0.75 1.10 1.50 2.20 1.50 2.20 3.00 4.00 2.20 3.00 4.00 5.50 7.50 7.50 11.00 15.00 1.10 1.50 2.20 3.00 1.50 2.20 3.00 4.00 5.50 3.00 4.00 5.50 7.50 11.00 7.50 11.00 15.00 18.50 1.50 2.20 5.50 2.20 3.00 4.00 5.50 7.50 11.00

Base plate

Cplg.

No.

pump

S241

31 B68

S301 S272

B80

S301 S272

B68 B80

S303 B95

S241

B68

46

S272 S301

B80 B68

S272

B80

S303 S342

33

34

S383 S434

28

30

B95 B80

S303

36 B95

S383 46 S434 S301

B68

S303 S301 S342

B95 B68 B80

30

36 S303 B95 S383

n = 2900 rpm

Weight kg unit 51 52 54 57 74 72 80 89 96 81 90 97 128 138 151 171 184 64 67 71 80 69 77 79 93 115 92 99 122 133 162 151 171 184 224 69 77 116 83 92 99 122 133 162

Rag bolt DN 2

DN 1

a

b2

330

e1

480

390

32

50

e2

290

v

f1

125

h3

177

h4

317

350

360

540

320

140

390 360

480 540

350 320

125 140

60

197

357

80

225 390 600 100

80

160

490 540

660

440 490

330

480

290

360 390 360

405

350

540 480 540

320 350 320

170

75

260

485

177

317

125 140 125 140

197

357

240

420

225

405

60 40

65

390 450

600 540

390 100

350 400

160 140

350 600

490

160 440 75

50

65

540

660

490

170

390

480 600 480 540

350

125 160 125 140

100 450 390

400 350

600 490

240

420

260

485

197

357

225 240

405 420

225

405

60

160 440

240

420

w* 683 717 717 775 775 775 775 816 837 775 816 837 913 913 933 1051 1051 717 775 775 816 775 775 816 837 913 836 857 933 933 1051 933 1051 1051 1113 795 795 933 795 836 857 933 933 1050

w1

730

M16x200 820 730 820

920 1000

M20x400

730 820 730

M16x200

820 920 820

M20x400 M16x200

920

M20x400 1000

730 920 730 820

M16x200 M16x200 M20x400 M16x200

920 M20x400

* Motor protection type IP 55, dimensions depend on the motor manufacturer. Dimensions listed are taken the SIEMENS catalogue.

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

Size

50-200

50-250

65-125

65-160

65-200

65-250

80-160

80-200

80-250

100-160

100-200

100-250

125-200

Motor size 100L 112M 132S 132S 160M 160M 160M 160L 180M 200L 100L 112M 132S 132S 132S 132S 160M 160M 160M 160M 160L 180M 200L 160L 180M 200L 200L 225M 132S 160M 160M 160L 180M 160M 160L 180M 200L 200L 180M 200L 200L 225M 250M 160L 180M 200L 200L 160L 180M 200L 200L 225M 200L 200L 225M 250M 280S 280M 250M 280S 280M

kW 3.00 4.00 5.50 7.50 11.00 15.00 15.00 18.50 22.00 30.00 3.00 4.00 5.50 7.50 5.50 7.50 11.00 15.00 11.00 15.00 18.50 22.00 30.00 18.50 22.00 30.00 37.00 45.00 7.50 11.00 15.00 18.50 22.00 15.00 18.50 22.00 30.00 37.00 22.00 30.00 37.00 45.00 55.00 18.50 22.00 30.00 37.00 18.50 22.00 30.00 37.00 45.00 30.00 37.00 45.00 55.00 75.00 90.00 55.00 75.00 90.00

Base plate No. S342

Cplg.

pump

B80

S303 S383

Weight kg

40 B95

S434 50 S605 S342

B110 B125 B80 33

S383 39 B95 S434 45 S605 S435

B110 B125 B95

S486

B125

70

S607 S383 B95 S434

S605

43 B110 B95 B110 B125

S486

60

B110 B125

75

S607 S435 S486 S435

B140 B95 B110 B125 B95 B110

S486 S607 S486

78

70 B125

S607

85

S609A

B140 B160

S607 S609A

B140 B160

100

unit 96 103 126 136 167 180 188 228 243 303 98 104 119 130 125 136 165 179 170 183 222 238 298 254 290 397 332 357 148 167 181 220 235 226 244 259 314 338 293 348 372 402 651 263 278 341 365 254 269 332 357 397 358 382 413 661 827 869 677 842 884

Rag bolt DN 2

DN 1

a

b2

e1

e2

v

450

540

400

140

390

600

350

160

f1

h3

h4

w*

w1

240

440

820

225

425

836 857 933 933 1051 1051 1051 1113 1175 1233 836 857 933 933 933 933 1051 1051 1051 1051 1113 1175 1233 1223 1285 1343 1343 1373 958 1076 1076 1138 1200 1186 1248 1310 1368 1368 1310 1368 1368 1398 1528 1248 1310 1368 1368 1248 1310 1368 1368 1398 1383 1383 1413 1543 1643 1643 1543 1643 1643

60 50

65

100

490

600

440

160

240

440

540

660

490

170

260

485

730

740

670

190

280 300

505 525

450

540

400

140

75

420 490

600

440

160

60 240 440

65

80

100 540

660

490

170 260

485

280 300 280

505 525 530

300

550

75 730

670

190

490

200

740 540 610

840

550

205

90

730 490

940 600

670 440

230 160

325

575

540

660

490

170

260

485

730

740

670

190

505 80

100

75

280

125

530 550 610

840

550

205

300 580 90

125 100

125

140

125

150

140

730

940

670

230

605 630

200

325 350 280

540

740

490

610

840

550

205

300

580

540

740

490

200

280

560

610

840

550

205

300

580

730 610

940 840

670 550

230 205

325

605

730

940

670

230 350 380

630 660

350 380

665 695

744

1200

696

300

730 744

940 1200

670 696

230 300

90

90

M20x400 M16x200

920 M20x400 1000 1120

M24x400

820

920

M20x400 1000

1120

M24x400

1140

M20x400

1250

M24x400

1400 920 M20x400 1000

1120

M24x400 1250

1400 1140

M20x400

1250

M24x400

1140

M20x400

1250 1400 1250

M24x400

1400 1800 1400 1800

M24x400

* Motor protection type IP 55, dimensions depend on the motor manufacturer. Dimensions listed are taken from the SIEMENS catalogue.

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

Foundation plan for units with spacer type coupling, bearing brackets 25,35 and 45.

Dimensions in mm Tolerances for welded parts acc. to DIN 8570B Size

32-125 32-160 32-200

32-250

40-125

40-160

40-200

40-250

40-315

50-125

50-160

50-200

50-250

50-315 65-125

65-160

Motor size 71 71 80 80 80 90S 80 90S 90L 100L 71 80 71 80 80 90S 80 80 90S 90L 90S 90L 100L 100L 100L 100L 112M 132S 71 80 80 80 80 90S 80 90S 90L 100L 90L 100L 100L 112M 112M 132S 132M 80 80 80 90L 100L

kW 0.37 0.37 0.55 0.55 0.75 1.10 0.75 1.10 1.50 2.20 0.37 0.55 0.37 0.55 0.75 1.10 0.55 0.75 1.10 1.50 1.10 1.50 2.20 3.00 2.20 3.00 4.00 5.50 0.37 0.55 0.75 0.55 0.75 1.10 0.75 1.10 1.50 2.20 1.50 2.20 3.00 4.00 4.00 5.50 7.50 0.55 0.75 0.75 1.50 2.20

Base plate

Cplg.

No.

pump

31 S272

33 H80

34

S015 S383

46

28 S272 30 S015 S342 H80 S303

36

S383

46

S605

73 H95

S272

30

S342 36 S303 S342

H80 40

S303

S383

50

H95 S605

88 H80 33

S342 H80 S383

n = 1450 rpm

Weight kg

39

unit 69 71 73 74 76 79 105 108 112 120 66 68 68 70 72 75 85 86 89 93 108 112 120 123 163 165 170 186 68 70 72 77 79 82 91 94 97 106 116 125 127 132 186 201 226 83 84 90 97 115

Rag bolt DN 2

DN 1

a

80 32

b2

360

e1

540

e2

320

v

f1

h3

h4

177 197

317 357

225

405

210

390

260

485

177

317

197

357

182 240

342 420

225

405

260

485

325

575

197

357

140

50 60 361 100

490

360

325 600

540

440

320

160

75

40

600 540

325 400

100

140

80 361 450

x

160 140

60

65 390

350

100

100 600 490

160 440 75

125

730

740

360

670

320 540

450

100 50

390 450

190

140 400

600 540

350 400

160 140

60

240

420

225 240

405 440

225

425

65

100 390

350 600

490

160 440

260

485

325

605

75 125

730

740

670

190

450

540

400

140

420 65

80

100

Designs are subject to amendment without prior notice.

60 490

600

440

160

240

100 440

w* 823 823 857 857 857 915 877 935 935 976 823 857 823 857 857 915 877 877 935 935 935 935 976 976 1111 1111 1132 1208 843 877 877 877 877 935 877 935 935 976 935 976 976 997 1132 1208 1234 877 877 877 935 976

w1

820

M16x200

M12x100 920

M20x400

820 M20x200 920 820

M12x100 M20x200 M16x200

920 M20x400

1120

M24x400

M16x200 820 M20x400 920 820

M16x200 M20x400 M16x200

920 M20x400

1120

M24x400

820 M20x400 920

© (Sterling Fluid Systems BV) 2001

Size

65-200

65-250

65-315

80-160

80-200

80-250

80-315

80-400

100-160

100-200

100-250

100-315

100-400

125-200

125-250

125-315

125-400

150-200

Motor size 90S 90L 100L 100L 112M 100L 100L 112M 132S 132S 132M 160M 160L 80 90S 90L 100L 100L 90L 100L 100L 112M 132S 100L 112M 132S 132M 132S 132M 160M 160L 160M 160L 180M 180L 200L 100L 100L 112M 132S 100L 100L 112M 132S 132M 112M 132S 132M 160M 160M 160L 180M 180L 160L 180M 180L 200L 225S 225M 132M 160M 160L 132M 160M 160L 160L 180M 180L 200L 225S 200L 225S 225M 250M 280S 132M 160M 160L 180M

kW 1.10 1.50 2.20 3.00 4.00 2.20 3.00 4.00 5.50 5.50 7.50 11.00 15.00 0.75 1.10 1.50 2.20 3.00 1.50 2.20 3.00 4.00 5.50 3.00 4.00 5.50 7.50 5.50 7.50 11.00 15.00 11.00 15.00 18.50 22.00 30.00 2.20 3.00 4.00 5.50 2.20 3.00 4.00 5.50 7.50 4.00 5.50 7.50 11.00 11.00 15.00 18.50 22.00 15.00 18.50 22.00 30.00 37.00 45.00 7.50 11.00 15.00 7.50 11.00 15.00 15.00 18.50 22.00 30.00 37.00 30.00 37.00 45.00 55.00 75.00 7.50 11.00 15.00 18.50

Base plate

Cplg.

No.

Weight kg pump

S383

45 H80

S605

70

S435 H95 S486 S607

92 H110

S383

43 H80

S434 60 S605 H95 H80 75

S486

H95 95

S607 S486

H110 H95

S607

H110

143

H125 S605

H80

S435

H95

S605

78

H80 70

S435 S486 S605

H95

S486

H95

H80 85

H110

S607

104

H125 H95 H110 177

S608

H125 H140

S486

H95 100

S607 S486

H110 H95

S607

H110 H95 H110

102

151 S608 S607

H125 H140 H125 H140

S608

188

S606

H160 H180 H95

S607

H110

180x73x14

123

unit 107 111 119 121 127 159 161 167 196 237 249 270 290 102 105 108 117 119 126 149 151 156 172 198 203 219 231 240 252 273 293 324 381 403 418 467 168 170 175 204 159 161 167 196 207 214 230 241 262 282 302 322 339 417 439 454 502 553 574 257 278 298 259 280 300 390 412 426 475 526 514 564 585 817 1054 296 329 348 368

Rag bolt DN 2

DN 1

a

b2

e1

e2

v

490

600

440

160

730

740

670

190

490

200

f1

75

h3

h4

260

485

300

550

280

530

325

605

x

100 65

80

540 125

80

610

840

550

205

730

940

670

230

490

600

440

160

540

660

490

170

730

740

670

190

90

260

280

300

610

840

550

205

485

75

100

125

140

580

140

665

730 80

125

940

730 540 125

100

670

230

380

735

670

190

300

580

490

200

280

560

670

190

300

580

280 300

560 580

325

605

740 730 540 610 730

840 740

490 550 670

200 205 190

610

840

550

205

90

125

140 140 350

940 730

230

1060 610

665

670 110

840

380

735

270 550

205 665

730 610

940 840

670 550

230 205

90

350 705

125

150

140

730

940

670

230

1060 940

270 230

1060

270

110

380

415

1460 840 150

200

Designs are subject to amendment without prior notice.

160

730

680

170 205

670 940

230

w1

920

M20x400

1120

M24x400

1140

M20x400

1250

M24x400

1400

920

M20x400

1000

530

90 350

w* 935 935 976 976 997 1086 1086 1007 1183 1208 1234 1326 1388 902 960 960 1001 1001 1070 1111

735

140

815

200

455

855

110

380

780

140

1132 1208 1111 1132 1208 1234 1208 1234 1326 1388 1383 1383 1507 1507 1565 1111 1111 1132 1208 1111 1111 1132 1208 1234 1147 1223 1249 1341 1341 1403 1465 1465 1398 1522 1522 1580 1617 1617 1249 1341 1403 1249 1341 1403 1398 1522 1522 1580 1617 1580 1617 1617 1740 1815 1269 1361 1423 1485

1120

M24x400 1250

1400 1250 1400

1120

M24x400

1140

M20x400

1120

M24x400

1140 1250 1120

M20x400

1250 M24x400 1400

1400 1600 1250 1400 1250

1400

M24x400

1600 1400 1600 1800 1250

M16x200 M24x400

1400

© (Sterling Fluid Systems BV) 2001

Size

150-250

150-315

150-400

200-250

Motor size 160L 180M 180L 200L 180L 200L 225S 225M 250M 225M 250M 280S

kW 15.00 18.50 22.00 30.00 22.00 30.00 37.00 45.00 55.00 45.00 55.00 75.00

280M 160L 180M 180L 200L

90.00 15.00 18.50 22.00 30.00

Base plate

Cplg.

No.

Weight kg pump

H110 128 S607

H125 H140 H110 H125 H140

170

S608

S608 180x73x x14

S608

H160 H140 H160 H180

H110 H125

205

230

unit 354 374 391 454 446 495 546 567 798 603 835 1072 1125 492 512 527 576

Rag bolt DN 2

DN 1

a

b2

e1

e2

940 160 150

730

f1

h3

h4

670

110

380

780

200

140

160

200

x

230

1060

200

v

160

730

730

1060 1460

1060

270

680

670

270 170

270

200

185

415

865

455

905

380

780

180

w* 1423 1485 1485 1543 1542 1600 1637 1637 1760 1637 1760 1835 1835 1518 1642 1642 1700

w1

1400 M24x400

1600

1800

M16x200

1600

M24x400

* Motor protection type IP 55, dimensions depend on the motor manufacturer. Dimensions listed are taken from the SIEMENS catalogue.

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

Foundation plan for units with spacer type coupling, bearing brackets 55 and 65.

Dimensions in mm Tolerances for welded parts acc. to DIN 8570 B Size

150-500

200-315

200-400

200-500

Motor size kW 180L 22.0 200L 30.0 225S 37.0 225M 45.0 250M 55.0 280S 75.0 280M 90.0 315S 110 315M 132 315L 160 315L 200 315 250 180L 22.0 200L 30.0 225S 37.0 225M 45.0 250M 55.0 280S 75.0 180L 22.0 200L 30.0 225S 37.0 225M 45.0 250M 55.0 280S 75.0 280M 90.0 315S 110 315M 132 315L 160 315L 200 315 250 225M 250M 280S 280M 315S 315M 315L 315L 315 315 355

45.0 55.0 75.0 90.0 110 132 160 200 250 315 355

Base plate

Cplg.

No.

pump

185x81x12 192x82x14

H125

196x82x14

H140

208x82x14

H160 H180

215x82x14

335

230x83x16 244x83x16

H200

256x87x16

H225 H125

187x72x12 194x73x14 198x73x14

H140

210x73x14

H160 H180 H125

217x74x14 185x72x12

310

192x73x14 196x73x14 208x73x14 215x74x14

H140 H160 H180

340

230x82x16 244x82x16

H200

256x87x16

H225

198x84x14

H140 H160 H180

210x84x14 217x84x14 232x85x16

395 246x85x16 258x87x16 281x98x18

H200 H225 H250

n = 1450 rpm

Weight kg unit 677 757 820 850 961 1143 1193 1406 1486 1644 1784 1625 662 715 780 810 921 1102 669 745 810 840 951 1132 1182 1409 1489 1644 1784 1630 920 1031 1212 1262 1474 1554 1709 1849 1685 1885 1985

Rag bolt DN 2

DN 1

a

b2

v

e1

e2

v2

f1

h3

h4

810

190 190 190 190 210 210 210 230 230 250 250 250 190 190 190 190 210 210 190 190 190 190 210 210 210 230 230 250 250 250

1470 1540 1580

760

735 770 790

235

550

1050

240

570

1070

820 150

200 180

830 870 720 200

730

740 720 730

200

250

180

740

820 870 840

200

850

870 980

190 210 210 210 230 230 250 250 250 250 290

1660 1730

770

x

830 865 180

1840

920

1940

970

2060 1490 1560 1600

810 670 680

1030 745 780 800

245

590

1090

255

505

955

260 1680 1750 1470 1540 1580 1660 1730

690 670 680

690

1840

840 875 735 770 790

525

975

235

505

1005

240

525

1025

830 865

180

180

920 760

1940 2060

970 810

1600 1680 1750

245

545

1045

1030 800 840 875

260

595

1155

790 1860

930

1960

980

180 265 615

2080

810

1040

2230

920

1115

270

635

1175

1195

w*

w1

1742 1800 1837 1837 1960 2035 2035 2170 2170 2310 2310 2430 1762 1820 1857 1857 1980 2055 1742 1800 1837 1837 1960 2035 2035 2170 2170 2310 2310 2430

1850 1920 1960

1857 1980 2055 2055 2190 2190 2330 2330 2450 2450 2675

2080 2150

M16 x200

2300 2440

M18 x200

2560 1870 1940 1980

M18 x200

2100 2170 1850 1920 1960

M16 x200

2080 2150 2300 2440

M18 x200

2560 1980 2100 2170

M16 x200

2320 2460 2580

M18 x200

2810

* Motor protection type IP 55, dimensions depend on the motor manufacturer. Dimensions listed are taken from the SIEMENS catalogue.

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

Size

Motor size

250-300

250-315

250-400

250-500

300-400

300-500

kW

Base plate

Cplg.

No.

Weight kg pump

225S 225M 250M 280S

37 45 55 75

207x88x14

H140

219x88x14

H160 H180

200L 225S 225M 250M 280S 280M 315S 315M 225S 225M 250M 280S 280M 315S 315M 315L 315L 315 315 355

30 37 45 55 75 90 110 132 37 45 55 75 90 110 132 160 200 250 315 355

199x80x14

280S 280M 315S 315M 315L 315L 315 315 355 355 225M 250M 280S 280M 315S 315M 315L 315L 315 315 355 355

75 90 110 132 160 200 250 315 355 400 45 55 75 90 110 132 160 200 250 315 355 400

227x93x14

225M 250M 280S 280M 315S 315M 315L 315L 315 315 355 355 355 400 400 400

45 55 75 90 110 132 160 200 250 315 355 400 500 560 630 710

416 226x88x14 203x80x14

H125 H140

222x80x14

H160 H180

237x82x16

H200

208x88x14

H140

220x88x14

H160 H180

215x80x14

227x88x14

424

464 242x89x16

H200 256x89x16 268x89x16

H225 H250

291x98x18

H180

242x94x16

H200 589

256x94x16 268x94x16

H225

291x98x18

H250

213X94X14

H140 H160 H180

225X94X14 232X94X14 247X95X16

H200 261X95X16

620 273X95X16

H225

296X98X18

H250

213x102x14 225x102x14 232x102x14

H140 H160 H180

247x103x16

H200 261x103x16

800 273x103x16

H225

296x104x18

H250

**

**

**

unit

Rag bolt DN 2

DN 1

898 928 1044 1225 846 906 936 1052 1233 1283 1496 1576 962 991 1103 1284 1334 1552 1632 1787 1927 1758 2158 2063 1431 1480 1703 1780 1933 2068 1903 2197 2202 2242 1143 1243 1466 1515 1733 1810 1968 2103 1949 2248 2253 2290

b2

v

e1

e2

1650 305

880

210 230

800 250

820

250

300

880 250

890

980 930

250

940

980

940

300 950

980 300

350

1263 1471 1654 1711 1925 2007 2170 2313 2720 2938 3372 3474 **

a

1020

300

1030

1040

**

**

**

**

190 210 210 210 230 230 230 230 210 210 230 230 230 250 250 250 250 270 270 290

v2

830

365

1770 1800

885 900

1610

805 750

1730 1760 1910

310

760

955 830

1740 1810

870 905 830

h4

595

545

1145

x

1030

2140

1070 920

180

315

310

565

570

1125

1170

180 315

590

1165

320

610

905

310

620

1190

1210 1290

230 230 250 250 250 250 270 270 290 290 210 230 230 230 250 250 270 270 270 270 290 290

1810

210 230 230 230 250 250 270 270 270 270 290 290

1710 1790 1860

2380

980

1190

370

690

1360

**

**

**

**

**

**

**

1920

180

1105

960

2060

2330

h3

865 880

1660

1920

f1

825

960 880

2060

1030

2140

1070

2330

920

1710 1790 1860 1970

890

660

1330

855 895 930

360

595

1265

1095

970

180

985

2190

1970

1310

320

1035

920

640

1165

2070

2380

315

365

615

1285

1190

370

635

1305

855 895 930

360

650

1320

180

985

2070

1035

2190

1095

365

670

1340

180

**

w*

w1

1947 1947 2070 2145

2070

1870 1907 1907 2030 2105 2105 2240 2240 1957 1957 2080 2155 2155 2290 2290 2430 2430 2550 2550 2775

1990 2030

2155 2155 2290 2290 2430 2430 2550 2550 2775 2775 2007 2130 2205 2205 2340 2340 2480 2480 2600 2600 2825 2825

2270

2007 2130 2205 2205 2340 2340 2480 2480 2600 2600 2825 2825

2130 2250 2320

**

**

M16x200 2190 2260

M164x200 2150 2220 2370

M18x200

2080 2200 2270

M16x200

2420 2560 M18x200 2680 2910 M16x200

2420 2560 M18x200 2680 2910 2130 2250 2320

M16x200

2470 2610 M18x200 2730 2960

M16x200

2470 2610 M18x200 2730 2960

**

* Motor protection type IP 55, dimensions depend on the motor manufacturer. Dimensions listed are taken fron the SIEMENS catalogue. ** On request.

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

Foundation plan for units with spacer type coupling, bearing brackets 25, 35 and 45

Dimensions in mm Tolerances for welded parts acc. to DIN 8570 B Size

32-125

32-160

32-200

32-250

40-125

40-160

40-200

40-250

50-125

50-160

Motor size 71 80 80 90S 90L 90S 90L 100L 112M 90L 100L 112M 132S 132S 132S 160M 160M 80 90S 90L 100L 90S 90L 100L 112M 132S 100L 112M 132S 132S 160M 132S 160M 160M 160L 90S 90L 132S 90L 100L 112M 132S 132S 160M

kW 0.55 0.75 1.10 1.50 2.20 1.50 2.20 3.00 4.00 2.20 3.00 4.00 5.50 7.50 7.50 11.0 15.0 1.10 1.50 2.20 3.00 1.50 2.20 3.00 4.00 5.50 3.00 4.00 5.50 7.50 11.00 7.50 11.00 15.00 18.50 1.50 2.20 5.50 2.20 3.00 4.00 5.50 7.50 11.00

Base plate

Cplg.

No. S272

pump

31

H80 33 S385

34

H95 46 S385 28 S605 H80 S385 30 H95 H80 S605 36 H95 46 S385 S015

H80 30

S434 S303 S385 S303 S434

H95 H80 36 H95

S605

n = 2900 rpm

Weight kg unit 70 71 73 76 79 78 81 89 96 82 90 97 121 131 152 164 177 70 73 76 84 75 78 86 93 116 101 106 123 133 164 152 193 207 225 75 78 116 93 101 108 123 133 164

Rag bolt DN 2

DN 1

a

b2

e1

e2

v

360

540

320

140

f1

60 32

50

80

490

740

440

80

670

317

192

332

212

372

240

420

260

485

192

332

212 192 212

352 332 372

232

392

260

440

280

505

260 182

485 342

212 225 240 225 240

372 405 420 405 420

260

440

190 60

40

177

x

100

75

740

h4

200

100

730

h3

100

65

100

75

50

65

100

490 361

600

440 325

200 160

540 390 490 390 540

660 600 740 600 660

490 350 440 350 490

170 160 200 160 170

730

740

670

190

60

100

w*

w1

823 857 857 915 915 915 915 956 977 915 956 977 1053 1053 1073 1191 1191 857 915 915 956 915 915 956 977 1053 976 997 1073 1073 1191 1073 1191 1191 1253 935 935 1073 935 976 997 1073 1073 1191

820

M16x200

1140 M20x400

1140

M20x400

1120

M24x400

1140

M20x400

1120

M24x400

1140 920

M20x400 M12x100

1000 920 1140 920 1000

M20x400 M14x200 M20x400 M16x200 M20x400

1120

M24x400

* Motor protection type IP 55, dimensions depend on the motor manufacturer. Dimensions listed are taken from the SIEMENS catalogue.

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

Size

50-200

50-250

65-125

65-160

65-200

65-250

80-160

80-200

80-250

100-160

100-200

100-250

125-200

Base plate

Motor size 100L 112M 132S 132S 160M 160M 160M

kW 3.00 4.00 5.50 7.50 11.00 15.00 15.00

No. S303

Cplg.

pump

H80

S434

40 H95

S605

160L

18.50

S385

180M 200L 100L 112M 132S 132S 132S 132S 160M 160M 160M 160M

22.00 30.00 3.00 4.00 5.50 7.50 5.50 7.50 11.00 15.00 11.00 15.00

S486 S383 S385

50 H110 H125 H80 33

S434 39 H95 S605

160L

18.50

S385

180M 200L 160L 180M 200L 200L 225M

22.00 30.00 18.50 22.00 30.00 37.00 45.00

S486

132S

7.50

160M 160M 160L 180M 160M 160L

11.00 15.00 18.50 22.00 15.00 18.50

180M

22.00

200L 200L 180M 200L 200L 225M 250M 160L 180M 200L 200L 160L 180M 200L 200L 225M 200L 200L 225M 250M 280S 280M 250M 280S 280M

30.00 37.00 22.00 30.00 37.00 45.00 55.00 18.50 22.00 30.00 37.00 18.50 22.00 30.00 37.00 45.00 30.00 37.00 45.00 55.00 75.00 90.00 55.00 75.00 90.00

Rag bolt

Weight kg DN 2

DN 1

a

b2

e1

e2

v

390

600

350

160

540

660

490

170

50

65

100 730

440

200

610

840

550

205

490

600 740

440

160 200

660

490

65

80

100

730

149

730

S486 S436

43 H110 H95 H110

60

H125 S607

H110 H125 75

S608

H125 H140 H95 H110 H125

78

S607 H95 H110 70 S608 S607

H125

S608

85

S609A

H140 H160

S608 S609A

H140 H160

100

190 204 222 237 227 253

740

840

670

170

w*

w1 920

505

976 997 1073 1073 1191 1191 1191

440

260

460

280 260

485

1253

1140

280 300

505 525

1315 1373 976 997 1073 1073 1073 1073 1191 1191 1191 1191

1250

1120

M24 x400 M20 x400

100

75

660 60

100

200

550

205

75

730

90

610 80

100

840

485

1253

1140

505 525

1250

300

550

1315 1373 1363 1425 1483 1483 1513 1098

1120

M24 x400

1140

M20 x400 M24 x400

270

325

190

280

575 505

440

200

260

485

550

205

280

505 530

490

215

260

510

1216 1216 1278 1340 1326 1388 140

550 730

940

670

230

300 580 90

1060

270

325 350

605 630

940

230

300

580

125 730 100

125

670

140 90

1060 940

270 230

1060

270

140

125

150

140

744

1200

696

300

730 744

1060 1200

670 696

270 300

90

M20 x400

280

125 540

1000

260

670

75

920 1140

505

740 490

M20 x400 M24 x400

280

670 1060

1120

460

140 230

1000

M16 x200 M20 x400 M24 x400

260 190

440

940

269 324 348 295 350 374 450 655 272 288 343 367 264 280 335 359 445 350 374 461 666 850 892 682 865 907

240

x

440

S605 H95

h4 425

240 540

S608

S385

h3 225

190

490

610

70

670

250 281 108 115 130 141 136 147 167 180 192 206

490

H125

740

229

240 300 264 280 389 335 414

H110 H125 H95 H110

f1

60

224

S607

45

unit 105 112 127 137 168 182 211

325

605

350 380

630 660

350 380

665 695

140

1450 1508 1508 1450 1508 1508 1538 1668 1388 1450 1508 1508 1388 1450 1508 1508 1538 1523 1523 1553 1683 1783 1783 1683 1783 1783

1400

M24 x400

1600

1250 1270

M20 x400

1400

M24 x400

1600

1400 M24 x400 1600 1400 1600 1800 1600 1800

M24 x400

* Motor protection type IP 55, dimensions depend on the motor manufacturer. Dimensions listed are taken from the SIEMENS catalogue.

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

Data regarding size - order information Type

Size

Hydraulic + Bearing A• First hydraulic B• Second hydraulic D• Double volute

•B Two ball bearings greased for life (2Z) •C Two ball bearings oil lubricated •S One double row angular contact bearing plus one ball bearing, grease lubricated •T One double row ball bearing plus ball bearing, oil lubricated

Shaft Seal

Material

041: Self-sealed, uncooled packing rings 052: Uncooled packing rings, external seal liquid AF3: Balanced mechanical seal, seal face materials SiC/Carbon, elastomer EPDM BJ3: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer EPDM C23: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer EPDM AFS: Balanced mechanical seal, seal face materials SiC/ SiC, elastomer FPM (Viton) BJS: Unbalanced bellows mechanical seal, seal face materials SiC/ SiC, elastomer FPM (Viton) C2S: Unbalanced bellows mechanical seal, seal face materials SiC/ SiC, elastomer FPM (Viton) AFK: Balanced mechanical seal, seal face materials SiC/carbon, elastomer FPM (Viton) double PTFE (Teflon) wrapped BJJ: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer FPM (Viton) C2J: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer FPM (Viton)

Casing Gasket

0B: Cast iron GG25

0C: Cast iron GG25 Bronze G-CuSn10 impeller

2: Confined flat gasket of EWP 210 material

0E: Cast iron GG25 stainless steel 1.4408 4: Confined flat impeller gasket of PTFE.

4B: Stainless steel 1.4408

AX3,AXS,AXK: AF3,AFS,AFK plus quench AY3,AYS,AYK: AF3,AFS,AFK. plus heating A93,A9S,A9K: AF3,AFS,AFK plus external flushing

•2 Oil lubrication configurations with CLO 32125 32160 32200

ZLND

32250 40125 40160 40200 40250 40315 50125 50160 50200 50250 50315 65125 65160 65200 65250 65315 80160 80200 80250 80315 80400 100160 100200 100250 100315 100400 125200 125250 125315 125400 150200 150250 150315 150400 150500 200250 200315 200400 200500 250300 250315 250400 250500 300400 300500

AB, AC or A2 AB, AC, A2, BB,BC or B2 AB, AC, A2, BB,BC or B2

AB, AC or A2

Alternatively

Alternatively

Alternatively

041,052,BJ3,C23,AF3,AX3,AY3,A93,BJS,C2S, AFS,AXS,AYS,A9S,BJJ,C2J,AFK,AXK,AYK,A9K

0B, 0C, 0E, 4B

2 or 4

AS, AT or A2 AB, AC or A2 AS , AT or A2 DS, DT or D2 AS, AT or A2 DS, DT or D2

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

COPYRIGHT WARNING Please read this notice The material you are viewing in this document is protected by Copyright and may only be used in accordance with Copyright, Designs and Patent legislation. It is not permitted to copy - either in full or in part - nor substantially extract, reproduce or re-use any of the contents of this document in any material form or in any medium without permission from the Copyright holders or their assignees. Any unlawful use of the material in this document may result in claims for civil remedies, including an injunction to restrain further use and a claim for damages; or may result in criminal penalties.

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001

Sterling Fluid Systems (Spain), S.A. Vereda de los Zapateros s/n, Pozuelo de Alarcón 28223 Madrid, Spain. Telephone +34 91 709 1310 Telefax +34 91 715 9700. E-mail [email protected]

Designs are subject to amendment without prior notice.

© (Sterling Fluid Systems BV) 2001