VERTICAL MACHINING CENTER

Vertical Machining Center

World Top Class Quality

HYUNDAI-KIA Machine Tools

High Speed & Productivity Vertical Machining Center

VX400

VX500

VX650

VX 400

VX 400

VX400/500/650

600kg

VX 500

VX 500

VX400/500/650

Accomplishment of powerful spindle with speed of 8,000RPM and motor output 15kW, and torque 29.2kgf.m

Accomplishment of advanced productivity by minimizing non-cutting time during axis’ movement, feed rate of X and Y axis are 36m/min. Long X-axis (1,060mm), Y-axis (510mm), and Z-axis (635mm) travels accomplished economical efficiency and excellent productivity.

The most optimized design bed, column, saddle, and head maintain high rigidity at any circumstance, so distortion is extremely minimized even during heavy duty cutting.

VX500 (8,000rpm)

VX500 (10,000rpm)

High precision, multi CAM type ATC

12kgf.m(30min, S3 60%)

Central Integrated Operational Panel allows operator avoid unnecessary movement, and designed for the best performance, also, 70。rotate panel gives operator much convenient.

9.73kgf.m(cont)

18.5kW (30min, S3 60%)

VOLUME LINE CHANGE SPEED

35

BASE SPEED

15kW(cont)

1500

4000 10000

Precisely pretension ball-screw minimizes heat growth, also double anchors support system adds more rigidity.

VX500/50 (6,000rpm) Unit : mm(in)

36.5kgf.m(15min, S3 15%) 18.2kgf.m(cont)

35

400 600

4800 6000

VX 650

VX 650, VX650/50

VX400/500/650

The most optimized design bed, column, saddle, and head maintain high rigidity at any circumstance, so distortion is extremely minimized even during heavy duty cutting.

Precisive and fast rigid tap function maximizes productivity, allows high machining accuracy and extends life time of tap tool.

Accomplishment of wide range machining by maximum 8,000RPM spindle

VX650 (8,000rpm)

Super precision, high speed angular ball bearing spindle was adopted for high speed spindle Properly applied bearing pretension strengthened rigidity, and reduced heat growth during spindle rotates, and extended life time of bearing.

1,600x650 wide maximum workpiece size, and 1,300kg heavy load capability makes this machine better than any other in its class.

VX650 (10,000rpm)

12kgf.m(30min, S3 60%) 9.73kgf.m(cont)

18.5kW (30min, S3 60%)

VOLUME LINE CHANGE SPEED

35

BASE SPEED

15kW(cont)

1500

4000 10000

VX650/50 (6,000rpm) 36.5kgf.m(15min, S3 15%) 18.2kgf.m(cont)

Wide four Y-axis slide ways were adopted to eliminate accuracy deviation due to overhang, so high precision machining is possible even during heavy duty cutting. highly rigid linear guide

45¡£

45¡£

4-way equal load rating type 35

400 600

4800 6000

Specification



!

! 





 

 







 !

! 

PULL STUD





CAT40





!



 !!

  

   

!  ! 

 !

 

 

PULL STUD

BT50

PULL STUD

CAT50 PULL STUD

PULL STUD









!















!







  









 

!

!!

0





  

 

 



!





!

BT40



!

 

VX400/500/650

VX400 2,030 (80) 1,325 (52.2)

1,325 (52.2)

881 (34.7)

980 (34.3)

83 (3.3)

2,917.5 (114.9)

267.5 (10.5)

1,120 (44)

765 (30)

1,522 (60)

230 (9)

875 (34.4)

230 (9)

682 (26.9)

2,833 (111.5)

1,952 (76.9)

520 (20.5)

712.5 (28)

170 (6.7)

1,325 (52.2)

1,325 (52.2)

340 (13.4) 267.5 (10.5)

544 (21.4)

2,800 (110.2) 3,630 (143)

VX500

508 (20) 472.5 (18.6) 2,119.5 (83.4)

535 (21) 705 (27.8)

550 (21.7) (X/2 STROKE)

803 (31.6)

300 (11.8)

1,400 (55) 2,800 (110)

544 (21.4) 1,400 (55)

1,508 (59.4) 2,053 (80.8)

545 (21.5)

395 (15.6) 1,903 (75)

24ATC

200 (7.9)

1,200 (47.2)

Spindle Center

1,508 (59.4)

1,100 (43.3) (X/2 STROKE)

440 (17.3)

550 (21.7)

2,885 (113.6)

990 (39)

700 (27.6) 677 (26.7)

2,885 (113.6)

24ATC

400 (15.7)

953.5 (37.5)

(Y/2 STROKE)

675 (26.6)

355 (14)

500 ( 19.7) (Y/2 STROKE)

965 (38)

255 (10)

1,083 (42.6)

635 (25) 255 (10)

(Z STROKE)

338 (13.3)

675 (26.6) 725 (28.5) 725 (28.5)

VX650 3,500(137.79)

1,828(71.97)

785(30.9)

2,649(104.3)

1,050(41.34)

950(37.4)

340 440 (13.38) (17.32)

2,045 (80.51) ( )

1,265(49.8)

335(13.19) 2,800(110.23)

2,465(97.04) 320(12.6) 550(21.65)

1,400(DOOR OPEN) (55.12)

2,960(116.53)

1,050(41.34)

2,876(113.22)

3,500(137.79)

2,020 (79.5)

1,160 (45.7)

870 (34.3)

Specification 224 (8.8)

Guide Slot

0 1-18 +0.027 from Center 0 Left, Right Side 3-18 +0.18

20 (0.8)

32 (1.3)

12 (0.5)

125 125 125 (4.9) (4.9) (4.9)

52.8 (2.1)

0 Ø46 ) 8.1 (Ø1

42.5 (1.7)

Ø55 0 (Ø2 1.7)

460 (18.1)

Ø9 0 (Ø3 .5)

800 (31.5) 1,000 (39.4)

100 (3.9)

42.5 (1.7)

30 (12) 100 (3.9)

T-Slot Detail

Ø (Ø 95 3. 7)

00 Ø6 ) 3.6 (Ø2

224 (8.8) 60 Ø4 .1) 18 (Ø

50 (2)

1,100 (43.3) 1,200 (47.2)

50 (2)

50 100 100 100 100 50 (2) (3.9) (3.9) (3.9) (3.9) (2)

52.8 (2.1) 500 (19.7) 510 (20.1) 5 (0.2)

141.3 (5.6)

50 100 100 100 100 50 (2) (3.9) (3.9) (3.9) (3.9) (2)

5 (0.2)

5 (0.2)

Ø5 5 (Ø2 5 1.9 )

1,060 (41.7) 1,200 (47.2)

70 (2.8)

70 (2.8)

500 (19.7) 510 (20.1)

Ø7 1 (Ø2 0 8)

5 (0.2)

0 11 ) Ø 4.3 (Ø

264.8 (10.4)

0 11 ) Ø 4.3 (Ø

264.8 (10.4)

10 Ø7 ) 8 (Ø2

100 (3.9)

205 (8.1) Ø5 (Ø2 55 1.9 )

20 (0.8)

224 (8.8) 60 Ø4 .1) 18 (Ø

100 (3.9)

1,400 (55.1) 1,600 (63)

100 (3.9)

125 100 100 100 100 125 (4.9) (3.9) (3.9) (3.9) (3.9) (4.9)

52.8 (2.1) 650 (25.6) 660 (26) 5 (0.2)

102 (4)

125 100 100 100 100 125 (4.9) (3.9) (3.9) (3.9) (3.9) (4.9)

5 (0.2)

Ø553 .8) (Ø21

Ø (Ø 95 3. 7)

5 (0.2)

Ø4 5 (Ø1 8 8)

12 (0.5)

32 (1.3)

650 (25.6) 660 (26)

T-Slot Detail

100 (3.9)

1,400 (55.1) 1,600 (63)

100 (3.9)

650 (25.6) 660 (26)

Ø 9 3. 5 7)

(Ø

1,600 (63)

30 (12)

5 (0.2)

1,400 (55.1)

100 (3.9)

0 1-18 +0.027 from Center 0 Left, Right Side 4-18 +0.18

5 (0.2)

141.3 (5.6)

125 100 100 100 100 125 (4.9) (3.9) (3.9) (3.9) (3.9) (4.9)

5 (0.2)

Ø6 0 (Ø2 0 3.6 )

VX400/500/650

i

VX400

VX500 / VX650

Specification

VX400/500/650

Controller

FANUC 0i -M Controls

Spindle functions Feed functions

Tool functions

Programming functions

Tape functions

Other functions

Options

ITEM Controlled axes Simultaneous controllable axes Least command increment Least input increment Spindle speed command Spindle speed override(10% increment) Spindle orientation Feedrate override(10% increment) Dwell Reference point return Manual pulse generator Dry run Rapid traverse override Tool number command Tool length compensation Cutter compensation-type C Number of tool offsets Absolute/incremental programming Canned cycle Decimal point input Circular interpolation by radius programming Sub program Work coordinate system Local/Machine coordinate system Maximum commandable value M function Input code I/O interface Part program storage Stored programs CRT unit / MDI Synchronized tapping Background editing Backlash compensation Stored pitch error compensation Safety function Program test functions Operation functions Mirror image Run hour and part count display Self-diagnosis function Custom Macro B Program restart Display of PMC alarm message Stored stroke check 1 Graphic Display PC connection through HSSB 4-aixs function Optional Blockskip(9EA) Fanuc 21iM CNC

Figures in inch are converted from metric values. Design and specifications subject to change without notice.

SPECIFICATION 3(X,Y,Z) axes Positioning(G00)/linear interpolation(G01)3axes Circular interpolation (G02, G03) 2axes 0.001mm (0.0001") 0.001mm (0.0001") S5 digits, binary output 10-150% Spindle orientation 0-200% G04 G27, G28, G29, G30 0.001/0.01/0.1mm(0.0001/0.001/0.01inch) Dry run F0 (fine feed), 25/50/100% T2 digits G43, G44 G41, G42 400EA G90/G91 G70~G72, G74~G76, G80, G83~G88 Input values with decimal point Radius programming by R value instead of I,J,K Nesting to 4 levels G54-G59 G52/G53 99999.999mm( 9999.9999inch) M3 digits ISO/EIA Auto recognition RS232C 640M(2,100FT) 200 EA 8.4 Color TFT LCD / soft key input for MDI Rigid tapping function Part program storage and editing during automatic operation Pitch error offset compensation for each axis Backlash compensation Emergency stop / overtravel Machine lock(all / Z axis) / single block Tape / Memory / MDI/Manual Reverse axis movement (Setting screen and M-function) Run time and part count display Self-diagnosis test #100 ~ #199, #500 ~ #999 program restart Message display when PMC alarm occurred Overtravel controlled by software

with Manual Guide i

Head Office

Gwangju Plant Namsan Plant

Jungdong Plant

Banwol Plant

Gwangju Plant

Machine Tools 2nd Plant

Posung Plant

Seosan Plant

Melting & Molding Plant in China

Head Office & Factory

Seoul Office

391-8 Kaumjung-Dong, Changwon, Gyeongnam, Korea +82 55 280 9293, +82 55 282 9680 //www.wia.co.kr [email protected]

8F, Hansol B/D, #736-1, Yeoksam-1Dong, Kangnam-Ku, seoul, Korea +82 2 2033 8000 +82 2 2033 8181

HYUNDAI - KIA MACHINE AMERICA CORP. (New Jersey Office) 30 Murray Hill Parkway, Suite 300. East Rutherford, NJ 07073 U.S.A. +1 201 489 2887, //www.hyundai-kiamachine.com [email protected]

+1 201 489 2723

HYUNDAI - KIA MACHINE AMERICA CORP. (Chicago Office) 411 Kingston Court Mt. Prospect IL 60056 +1 847 824 7770, +1 847 824 8995 //www.hyundai-kiamachine.com [email protected] HYUNDAI - KIA MACHINE AMERICA CORP. (Argentina Office) AV, Alicia Moreau de Justo 1848 Of 4-6 Puerto Madero(C1107AFL), Buenos Aires, Argentina //www.hyundai-kiamachine.com [email protected]

+54 11 4313 1917,

+54 11 4313 1929

HYUNDAI - KIA MACHINE EUROPE GmbH (Germany Office) +49 69 271 4720, +49 69 271 472719 Kaiserleipromenade 5, D-63067 Offenbach, Germany [email protected] HYUNDAI - KIA MACHINE EUROPE GmbH (Germany Service Center) Kelsterbacher Str. 38-46 D-65479 Raunheim +49 6142 834 0, +49 6142 834 100 [email protected] HYUNDAI - KIA MACHINE SHANGHAI Room 501 Ocular B/D, No. 1336 Wu zhong Road, Shanghai, China 201103 +86 21 3431 0370~3, +86 21 3431 0376 [email protected] HYUNDAI - KIA MACHINE BEIJING Room 908 No. 38 Xiaoyun Road, Chaoyang District, Beijing, China 100027 +86 10 8453 9850, +86 10 8453 9853 [email protected] HYUNDAI - KIA MACHINE GUANGZHOU Room 1305 Citic Plaza No. 233 Tianhebei Road. Guangzhou, China 510613 +86 20 8752 1595/1596, +86 20 8752 1597 [email protected] HYUNDAI - KIA MACHINE INDIA OFFICE 6B, EGA Trade Center, 809 Poonamallee High Load, Kilpauk, Chennai - 600 010, Tamilnadu, India +91 44 4305 7112, +91 44 4305 7116 [email protected]

5. (07. 07)