VALVES & MEASUREMENT

Engineered & Process Valves

About Cameron’s Valves & Measurement Group Cameron’s Valves & Measurement group is a leading provider of valves and measurement systems to the global oil and gas industry. Headquartered in Houston, Texas with manufacturing and service facilities worldwide, we serve our diverse customer base through four divisions: Distributed Valves, Engineered & Process Valves, Flow Management Solutions and Measurement Systems. The Engineered & Process Valves division provides large-diameter valves for use in natural gas, LNG, crude oil and refined products transmission lines. The traditional CAMERON® fully-welded ball valve product line has been combined with the ENTECH™, GROVE®, RING-O®, TEXSTEAM™, TK® and TOM WHEATLEY® product lines. This broad offering has significantly strengthened Cameron’s ability to serve as a single source for a wide scope of customer requirements. The division also provides critical service valves for refinery, chemical and petrochemical processing businesses and for associated storage terminal applications, particularly through the ORBIT® and GENERAL VALVE® lines. These brands are complimented by WKM® and TBV™ valve products and considerably expand the scope of the division’s product offerings. Cameron’s Valves & Measurement group brings together the expertise and technology of the world’s premier brands into one single, industryleading entity. When you can choose Cameron, why would you choose anyone else? 2

What Our Valves Can Do For You Exploration

GATHERING

Production

Transportation

Refining & Mktg

Process Industries

Engineered & Process Valves; API 6A, API 6D and ASME (ANSI) Valves CAMERON, ENTECH, GENERAL VALVE, GROVE, ORBIT, RING-O, TBV, TEXSTEAM, TK, TOM WHEATLEY, WKM

Distributed Valves; API 6D and ASME (ANSI) Valves and Chokes DEMCO, NAVCO, NUTRON, TECHNO, THORNHILL CRAVER, TOM WHEATLEY, WHEATLEY, WKM

Measurement Systems BARTON, CALDON, CLIF MOCK, JISKOOT, LINCO, NUFLO, PAAI

What do you look for in a valve provider? Productivity. Performance. Premier brands you trust for precision and reliability. Field-proven products designed for critical service. Solutions tailored for even the most demanding environments. Superior service after the sale. All available from one source. Anywhere in the world. Naturally, you have a choice, but when you can have everything you seek in a world-class leader like Cameron, why choose anyone else? 3

Products CAMERON® Fully Welded Ball Valves • Forged Components • Light Weight • Compact Design • The T31 Incorporates PTFE lip seals and utilizes a rotating seat design for long life and minimal maintenance • The B8 is designed for corrosive and erosive service, and is available in a wide variety of materials and trims

GROVE® Top Entry & Side Entry Trunnion Mounted Ball Valves • Forged Components • Available in various grades of carbon steel, stainless steel and high alloys • The wide range of material selections allows for the valves to be used in the most severe applications • Preferred by the oil and gas industry for both offshore and onshore

GROVE® & RING-O® Top Entry Gate Valves • The Grove G4 gate valves are ideally suited for services requiring block and bleed or double block and bleed • The G4 top entry design means easy maintenance • The G4 traditional field of application is in oil & gas transmission, distribution industry • The RING-O subsea gate valve is used in manifold and isolation applications

4

ORBIT® Rising Stem Ball Valves • Unique tilt and turn design with no friction • Soft and metal seated • Used in critical, high cycle and high temperature applications • Used in over 85% of the major LNG and natural gas plants in the world for molecular sieve service • Preferred by major process licensors for hydrogen service in refining applications, hydrotreaters and hydrocrackers

GENERAL VALVE® Double Block, Bleed Plug & Four-Way Diverter Valves • Used typically in liquid storage and transmission • The valve of choice in military and commercial aviation fueling systems • Provides bubble tight verifiable dual seal without seal abrasion • Four-Way Diverter valves primarily used in bi-directional liquid metering systems

5

Products RING-O® Subsea Top Entry & Side Entry Ball Valves • Engineered to order for pipeline, production and process applications • The valves are applied primarily in the subsea service, but are also available for surface applications • These valves are designed to meet specific customer requirements and are installed in some of the harshest environments in the oil and gas industry

TBV® Ball Valves • Originally known as the Titanium Ball Valve Company • Valves available in a wide range of sizes, pressure class, and temperature range • Superior capability in exotic alloys and specialty applications including cryogenic and autoclave mining applications • Valve capability extends across many industries including refining, petrochemical and LNG processing

TEXSTEAM™ Plug Valves • Preferred valve for manifold and production services in erosive environments • Sealant Injection, internal path to provide an emergency seal • Metal to metal seating, erosion resistant design • Top entry, inline repairable – no special tools or training required

6

TOM WHEATLEY™ Swing & Subsea Check Valves • Used in critical service applications worldwide. • The swing check design prevents backflow in a fraction of a second, and there is no need for expensive actuation • The subsea model features a unique, free swing clapper. If a reverse or critical pigging operation is required, the clapper can be manually, ROV or hydraulically actuated and held in a full open position

ENTECH™ / TOM WHEATLEY™ Nozzle Check Valves • Used for pipeline, production and process applications • The valves are applied primarily in gas compression applications • Non-slam valve that prevents reverse flow. The short stroke length reduces closing time and eliminates water hammer • Pressure lost with a nozzle check is minimal and has excellent dynamic performance

7

Products TK® Side Entry Trunnion Mounted Ball Valves • High-integrity for over 40 years of reliable block-andbleed service for the oil and gas industries for severe service applications • Robust design, superior sealing surfaces and stainless steel overlays • TK also manufactures a Twin Valve which satisfies the double, isolation requirements as specified in most process safety management systems

WKM® TRIAX™ Triple Offset Butterfly Valves • Metal sealing as standard • Used in a number of high temperature and critical process applications • Provides tight shutoff for a lower cost than more traditional valves • Offers a unique patented simple and replaceable single piece seat design

8

WKM® Through Conduit Gate Valves • Two Styles: – Saf-T-Seal slab gate – Pow-R-Seal expanding gate • Typically used for mainline and manifold valves in liquid pipelines • Pow-R-Seals are frequently used for processes, double block and bleed service, and critical pipeline areas where safety or environmental concerns exist • Designed to API 6D

9

BRAND

CAMERON FULLY WELDED BALL VALVES

TRUNNION MOUNTED BALL VALVES

GROVE SIDE ENTRY

MODEL / MATERIALS OF CONSTRUCTION

SIZES

PRESSURE / TEMP

T-31: Body – ASTM A350 Gr LF2(M). Ball – ASTM A694 Gr F50(M) with ENP. Seat Ring – AISI 1040. Stem Seals – PTFE. Lip Seals – PTFE. Seat Ring Insert – Nylon. Other materials available upon request.

2” – 56”

Class 150# – 2500# -50°F – 392°F (-46°C – 121°C)

B8: Body – ASTM A350 Gr LF2(M). Ball – ASTM A350 Gr LF2 with ENP. Seats – ASTM A350 Gr LF2(M) with ENP. Seals – various grades of FKM.

2” – 60”

Class 150# – 1500# -50°F – 392°F (-46°C – 121°C)

B4: Body – Forged carbon and stainless steel, Duplex SS, and other alloys. Ball and Seats – 3 mil ENP or TCC carbon steel, stainless steel, Duplex SS, and other alloys. Seat Seals – RPTFE, Nylon, PEEK, Turcite™, KEL-F™, metal-to-metal.

2” – 12”

Class 150# – 2500# -50°F – 338°F (-46°C – 170°C)

B5: Body – Forged carbon and stainless steel, Duplex SS, and other alloys. Ball and Seats – 1 or 3 mil ENP or TCC carbon steel, stainless steel, Duplex SS, and other alloys. Seat Seals – Viton™, RPTFE, Nylon, PEEK, Turcite, KEL-F, metal-to-metal.

6” – 64”

Class 150# – 900# -50°F – 392°F (-46C°– 200°C) Class 1500# -50°F – 338°F (-46°C – 170°C)

B-71: Body – Forged carbon and stainless steel, Duplex SS, and other alloys. Ball and Seat – 1 or 3 mil ENP or TCC carbon steel, stainless steel, Duplex SS, and other alloys. Seat Seals – RPTFE, Nylon, PEEK, Turcite, KEL-F, metal-to-metal.

11/2“ – 8” RB 2 1/16“ – 4 1/16“

Class 2500# API 3000# – 10,000# -50°F – 338°F (-46°C – 170°C)

B-7B: Body – Forged carbon and stainless steel, Duplex SS, and other alloys. Ball and Seat – 1 or 3 mil ENP or TCC carbon steel, stainless steel, Duplex SS, and other alloys. Seat Seals – RPTFE, Nylon, PEEK, Turcite, KEL-F, metal-to-metal.

8” – 24” 71/16“ – 13”

Class 2500# API 3000# – 10,000# -50°F – 338°F (-46°C – 170°C)

11/2“ – 12”

Class 150# – 600# -20°F – 320°F (-29°C – 160°C) Class 900# – 1500# -20°F – 250°F (-29°C – 121°C)

11/2“ – 4”

Class 2500# -20°F – 250°F (-29°C – 121°C)

14” – 60”

Class 150# – 600# -20°F – 320°F (-29°C – 160°C) Class 900# – 1500# -20°F – 250°F (-29°C – 121°C)

BT-1: Body – Cast carbon and stainless steel, Duplex SS, and other alloys (solid or fully clad). Ball and Seat – 1 or 3 mil ENP or TCC forged carbon steel, stainless steel, Duplex SS, and other alloys. Seat Seals – RPTFE, Nylon, PEEK, Turcite, KEL-F, metal-to-metal.

GROVE TOP ENTRY

BT-2: Body – Cast carbon and stainless steel, Duplex SS, and other alloys (solid or fully clad). Trim – 1 or 3 mil ENP or TCC forged carbon steel, stainless steel, Duplex SS, and other alloys. Seat Seals – Viton, RPTFE, Nylon, PEEK, Turcite, KEL-F, metal-to-metal.

Subsea Top Entry: Body and trim materials available in carbon steel, low and high alloys as required. Available in soft seat as well as metal-tometal seated configurations, and full or partially clad valves.

2” – 42”

RING-O Subsea Side Entry: Body and trim materials available in carbon steel, low and high alloys as required. Available in soft seat as well as metal-tometal seated configurations, and full or partially clad valves.

2” – 42”

Class 150# – 2500# API 3000# – 10,000# -20°F – 248°F (-29°C – 120°C) Optional -50°F – 374°F (-46°C – 190°C) Class 150# – 2500# API 3000# – 10,000# -20°F – 248°F (-29°C – 120°C) Optional -50°F – 374°F (-46°C – 190°C)

Pressure and temperature may be limited by trim options and/or valve size. For details please reference product data sheets.

10

NOZZLE CHECK VALVES

BRAND

ENTECH

MODEL / MATERIALS OF CONSTRUCTION

SIZES

PRESSURE / TEMP

DRV-Z: Carbon or stainless steel with a wide variety of weld overlays.

1” – 10”

Class 150# – 2500# API 3000# - 10,000# -20°F – 550°F (-29°C – 288°C)

DRV-B: Carbon or stainless steel with a wide variety of weld overlays.

12” – 68”

Class 150# – 2500# API 3000# - 10,000# -20°F – 550°F (-29°C – 288°C)

DRV-BK: Carbon or stainless steel with a wide variety of weld overlays.

12” – 68”

Class 150# – 2500# API 3000# - 10,000# -20°F – 550°F (-29°C – 288°C)

G-12: Body – ASTM A216 WCB. Bonnet – ASTM A216 WCB. Seats – ASTM A105 1 or 3 mil ENP. Gate – Fe 510 1 or 3 mil ENP. Gaskets – NBR, Viton. Seal O-rings – NBR, Viton.

4” – 48”

Class 150# – 1500# -20°F – 250°F (-29°C – 160°C)

G-4N: Body – ASTM A572 Gr.50, ASTM A516 Gr.70. Gate – ASTM A572 Gr.50, ASTM A516 Gr.70, 1 or 3 mil ENP. Seats – ASTM A105, ASTM A350 LF2, 1 or 3 mil ENP. Gaskets – NBR, Viton. Seal O-Rings – NBR, Viton.

4” – 60”

Class 150# – 1500# -20°F – 250°F (-29°C – 121°C)

2“ – 11”

Class 150# – 2500# API 2000# – 15,000# -31°F – 293°F (-35°C – 145°C) Optional -31°F – 338°F (-35°C – 170°C)

2” – 36”

Class 150# – ANSI 2500# -20°F – 248°F (-29° – 120°C) Optional -50°F – 374°F (-46°C – 190°C)

GATE VALVES

GROVE

Subsea API 6A: Body and Trim materials available in carbon steel, low and high alloys as required. Available in soft seat as well as metal-tometal seated configurations, and full or partially clad valves. Available with manual, manual ROV, or hydraulic actuators.

RING-O Double Expanding: Double Expanding: Body and Trim materials available in carbon steel, low and high alloys as required. Available in soft seat and metal-to-metal seated configurations, and full or partially clad valves. Available with manual or hydraulic actuators.

TRUNNION BALL VALVES

Body Materials – Carbon and stainless steel, Duplex SS, Inconel, Monel, Hastelloy. Seats – Reinforced Teflon, Nylon and PEEK. Trims – 1 or 3 mil ENP, stainless steel, Duplex, Inconel, Monel, and Hastelloy.

TK

API 6D Valves

ALL

-150°F – 550°F (-101°C – 288°C)

2” – 36”

Class 150# – 600#

2” – 24”

Class 900# – 1500#

2” – 16”

Class 2500#

API 6A Valves

2 1/16” – 11”

Instrumentation Valves

3/4“

– 1 1/2“

Class 2000# – 5000#

Class 900# – 1500#

Pressure and temperature may be limited by trim options and/or valve size. For details please reference product data sheets.

11

PLUG VALVES

BRAND

TEXSTEAM SUPER G API 6D

RISING STEM BALL VALVES

TEXSTEAM API 6A

MODEL / MATERIALS OF CONSTRUCTION

SIZES

Body & Bonnet: ASTM A487 Grade 4 (A-4C), 316 SS, Duplex SS, others upon request.

1” – 6”

Class 300#

Plug: 1018 Carbon, 4130 Low Temp, 17-4 PH SS, 316 SS, Duplex SS.

1” – 6”

Class 600#

Plug Hard Coating: 5 Mil Chrome 70 Rc, 3 Mil Hardened ENP-65 Rc, Tungsten Carbide 72 Rc, Chrome Oxide (Ceramic) 72 Rc.

1” – 8”

Class 900# – 2500#

Seat: 17-4 PH SS Nitrided, Nickel Alloy B-584, 10 SS With 5 Mil Tungsten Carbide.

1” – 6”

Class 4500# -20°F – 400°F

1” – 6”

Class 2000# – 15000#

8”

Class 2000# – 10000#

Materials shown as above and some special customer requirements and applications.

PRESSURE / TEMP

T3: Carbon steel body and bonnet with stainless steel trim; type BB, H and H8 seats for non-sour service. The Orbit OS and Y valve with H8 seat is used in high-temperature critical applications including mol sieve, heat transfer fluid and hot hydrogen service.

1” – 30”

Class 150# – 2500# -50° F – 800° F (-46° C – 427° C)

T7: Carbon steel body and bonnet with stainless steel trim; type BB, H and H8 seats for sour corrosive service. The Orbit valve with H and H8 seats is selected for sour oil and gas production and process lines containing abrasives for critical tight shutoff service.

1” – 30”

Class 150# – 2500# -50° F – 650° F (-46° C – 343° C)

T8: 316 stainless steel body and trim; type H and H8 seats for low-temperature / corrosive service. The Orbit 316 SS valve is selected for corrosive service where frequent cycling at high and low temperatures is required.

1” – 30”

Class 150# – 2500# -155° F – 800° F (-104° C – 427° C)

T4: Duplex stainless steel or high alloy body and trim; type H and H8 seats for low-temperature severe corrosive service. Orbit 22% Cr and 25% Cr Duplex, Inconel and 6Mo valves are selected for highly corrosive production fluids and gases in offshore and onshore installations.

1” – 30”

Class 150# – 2500# -155° F – 800° F (-104° C– 427° C)

Carbon steel body, ductile iron or carbon steel plug, bonnets and lower plate from A36 or A516 plate stock, ductile iron slips with Viton trim.

ALL

-50° F – 400° F (-46° C – 200° C)

2“ – 36”

Class 150# – 300#

2“ – 24”

Class 600# – 900#

2” – 24”

Class 150# – 600#

6” – 20”

Class 150# – 300#

6” – 16”

Class 600# – 1500#

6” – 24”

Class 150# – 300#

6” – 16”

Class 600# – 1500#

6” – 20”

Class 150# – 300#

6” – 20”

Class 600# – 900#

4” – 10”

Class 900#

ORBIT

DB & B PLUG VALVES

Twin Seal 70% Opening

Twin Seal Full Bore

GENERAL VALVE

Seat and Re-Seat (Reduced Bore)

Seat and Re-Seat (Full Bore)

Four-Way Diverter

Pressure and temperature may be limited by trim options and/or valve size. For details please reference product data sheets.

12

GATE VALVES

FLOATING BALL VALVES

CHECK VALVES

BRAND

TOM WHEATLEY

MODEL / MATERIALS OF CONSTRUCTION

SIZES

Swing check: Figures 54, 55 and 66 (RTJ, RF and WE) Integral Seat – Renewable Seat available upon request. Body – ASTM A216 Gr WCC. Clapper – ASTM A216 Gr WCC. Seals – Nitrile. Other materials available on request.

1” – 48”

Class 150# – 2500# API 5000# – 15000# -20°F – 250°F (-29°C – 121°C)

Piston check: Figures 75 and 76 (RF and RTJ) Integral Seat – Renewable Seat available upon request. Body – ASTM A216 Gr WCC. Clapper – ASTM A216 Gr WCC. Seals – Nitrile. Other materials available upon request.

2” – 12”

Class 150# – 2500# API 5000# – 15000# -20°F – 250°F (-29°C – 121°C)

Nozzle check: DRV-Z and DRV-B – Body – ASTM A216 Gr WCB. Flow Diffuser – ASTM A216 Gr WCB, Disc ASTM A351 Gr CF8M. Seat metalto-metal alloy 625. Other materials available upon request.

1” – 88”

Class 150# – 2500# -20°F – 500°F (-29°C – 260°C)

Series 1100: “Three-piece” body, 100% enclosed body seals, wide material choice, threaded, socket weld or butt weld ends.

1/4”

– 8”

Class 150# – 1500#

Series 2100: Cryogenic adaptations of the three-piece and flanged valve offerings.

1/4”

– 8”

Class 150# – 900#

– 12”

Class 150# – 1500#

Series 1800: High performance, bar stock materials, flanged, complete array of sealing technology. Series 21/18 cryo version of the 1800.

TBV

Series 2000: “Unibody” cast design, flanged, complete array of materials and options. Series 21/20 cryo version of the 2000.

1” – 8”

Class 150# – 300#

1” – 8”

Class 150# – 300#

3” – 8”

Class 600#

Series 3300: Bar stock materials, flanged, for highly abrasive / high torque applications.

1” – 14”

Class 150# – 900#

Series 8000: Trunnion Flanged Valves. Series 21/80 cryo version of the 8000.

10” – 16”

Class 150# – 900#

Pow-R-Seal Model ‘M & M1’: WCC A216 cast carbon steel body and bonnet, 4130 forged gate and segment with ENP, 4130 low alloy stem with ENP and carbon steel seats with ENP coating. Optional trim capabilities to 1000º F (538º C).

2” – 4”

Class 600# – 2500# -50° F + 250° F (-41° C + 121° C)

Pow-R-Seal Model ‘E1C’: WCC A216 cast carbon steel body, A36 plate or WCC A216 cast carbon steel bonnet, cast carbon steel gate and segment with ENP, 4130 low alloy stem with ENP, and carbon steel seats with ENP coating. Optional trim capabilities to 1000º F (538º C).

6” – 24”

Class 300# – 1500# -50° F + 250° F (-41° C + 121° C)

Saf-T-Seal Model ’M & M1’: WCC A216 cast carbon steel body and bonnet, 4130 gate with ENP, 4130 low alloy stem with ENP, and carbon steel seats with ENP coating.

2” – 4”

Class 600# – 2500# -50° F to +250° F (-41° C to +121° C)

Saf-T-Seal Model ’C6’: WCC A216 cast carbon steel body, A36 carbon steel bonnet, A36 carbon steel gate with ENP, 4130 low alloy stem with ENP, and carbon steel seats with ENP Coating.

6” – 12”

Class 150# – 300# -50° F to +250° F (-41° C to +121° C)

14” – 36”

Class 150# -50° F to +250° F (-41° C to +121° C)

14” – 24”

Class 300# – 600# -50° F to +250° F (-41° C to +121° C)

3 “ – 24”

Class 150# – 300#

Series 2800: Cast “split body”, flanged, for severe service applications. Series 21/28 cryo version of the 2800.

WKM

BUTTERFLY

Saf-T-Seal Model ’C6B’: WCC A216 cast carbon steel body and bonnet, A36 carbon steel gate with ENP, 4130 low alloy stem with ENP, and carbon steel seats with ENP coating.

WKM

1/2”

PRESSURE / TEMP

TriAx: Triple Offset Butterfly Valve

Pressure and temperature may be limited by trim options and/or valve size. For details please reference product data sheets.

13

Technology and Quality Quality is Key At Cameron, we know that quality is critical in all applications. Failure at any point can put lives in jeopardy. Our products go through stringent testing procedures to ensure we meet and exceed industry standards.

Technology Capabilities In house development capabilities: • 3D CAD / CAM Systems • Coordinate Measuring Machines •

Cryogenic Testing

•

Cycle Testing

•

FEA Analysis Capability

•

Fugitive Emissions Testing

•

High Temperature Testing

• High Pressure Gas Testing

TBV Series 21/80 under Cryogenic test at the Millbury, MA facility.

Quality Certifications

14

•

API 6A

•

API 6ASS

•

API 6D

•

API 6DSS

•

API 6FA

•

API 607

•

API Q1

•

CRN

•

GOST-R

•

ISO 14313

•

ISO 14723

•

ISO 9001

•

PED

•

Hyperbaric Testing

•

Nickel Plating

•

R & D Centers

•

Robotic Welding

Multi-axis machining center at the Little Rock, AR facility, installed in 2009.

“An over $140 million investment in manufacturing facilities.”

EPV facility located in Ville Platte, LA which has recently undergone a $30 million facility expansion.

An over $140 million investment in manufacturing facilities has been made since 2006, including many state of the art machining centers, cumulative plant size for the division now exceeds 1.2 million ft2.

Other Certifications •

API 607 Fire Testing

•

API 622 for Fugitive Emissions

• Multiple Cryogenic Certification

Standards

•

Shell GSI

•

Shell TAT

Robotic welding center in Voghera, Italy.

15

Facilities and Operations

Little Rock, AR Products • ORBIT • General Valve

Equipment-CNC Machines • • • • • • •

Horizontal Lathes 31 Vertical Turning Lathes 6 Horizontal Machining Centers 9 Horizontal Boring Machine 1 Vertical Machining Centers 16 Horizontal Turn-Mill 2 Trevisan 2

Tel: 501-568-6000 Plant Size • Office - 55,000 sq. ft. • Plant - 200,000 sq. ft. (Newly added 8000 sq. ft. for large bore valve assembly and test) • Total - 255,000 sq. ft.

Houston, TX – Meldrum LN

Tel: 713-946-2122

Products

Plant Size

• WKM / Gate

• Office - 15,000 sq. ft. • Plant - 60,000 sq. ft. • Total - 75,000 sq. ft.

Equipment • 5 ,000 sq. ft. high bay with 32 ft. hook ht. on 25T crane • Bullard VTL • Mazak CNC Machine Center • Multiple CNC Centers • Gas Testing • Aftermarket Service

16

Millbury, MA

Tel: 508-713-4800

Products

Plant Size

• TBV • WKM / TRIAX

• Office - 30,000 sq. ft. • Plant - 70,000 sq. ft. • Total - 100,000 sq. ft.

Equipment-CNC Machines • Multiple CNC Centers • Cryogenic Test Pit • Oxygen Cleaning Capability

Ville Platte, LA Products • • • •

WELDED BALL VALVES (T-30) WELDED BALL VALVES (B8 rolled ring) Side entry ball valves (B5 & B4 forged) Swing check valves (cast)

Plant Size • Total

-

337,000 sq. ft.

Tel: 337-363-7500

Colico, Italy



Tel: 39-0341-932211

Voghera, Italy

Tel: 39-0383-6911

Products

Plant Size

Products

Equipment

• • • •

• Plant

• S ide entry ball valves (Forged) • Top entry ball valves (cast) • Gate valves (cast & fabricated) • Welded ball valves (B8 rolled ring) • Welded ball valves (spherical body) • ENTECH Components

• C  NC Machining, cladding, seat / ball grinding • Robotic welding • ENP • TCC • Extensive test capability

SUB SEA VALVES SIDE ENTRY BALL VALVES SS/TS TOP ENTRY BALL VALVES SS/TS GATE VALVES SS/TS

- 150,000 sq. ft.

Equipment • C  NC Machine Centers • Robotic welding • Hyperbaric, Abrasive, and Cryogenic Testing

Hammond, LA

Tel: 985-345-6482

Products

• TK BALL VALVES

• GROVE SIDE ENTRY BALL VALVES • GROVE GATE VALVES

• C  NC Machine Center • TK Design and Manufacturing

Plant Size • Plant -

• Plant - 290,000 sq. ft.

Edmonton, Alberta

Products Equipment

Plant Size

Tel: 780-463-6868

Equipment • 5 CNC machines

Plant Size 75,000 sq. ft.

• Plant - 108,000 sq. ft. assembly / test / paint facility

17

Market and Applications Cameron is a leading provider of flow equipment products, systems and services to worldwide oil, gas and process industries.

CAMERON

SUBSEA

ESD

PIPELINE

GATHERING GAS COMPRESSION LNG OIL & GAS PRODUCTION

• • • • • • •

ENTECH / TW NOZZLECHECK

GROVE

RING-O

TK

• • • • • •

• • • • • • •

• • •

• • • • • •

REFINING

NUCLEAR

•

PETRO- CHEMICAL GAS PROCESSING

• •

•

PRODUCT STORAGE AVIATION FUELING SYSTEMS

INSTRUMENTATION SYSTEMS CRYOGENIC

•

DE-COKERS HVAC / STEAM SERVICE

18

• • • • • • •

ORBIT

• • • • • • • •

GENERAL VALVE

TBV

•

WKM / GATE

WKM / TRIAX

• • •

•

• •

•

•

•

• •

• • •

•

• • • • • • • •

• • •

MINING (HPAL)

POWER GENERATION

TOM WHEATLEY

•

•

• • •

We build it. We back it. It’s that simple with Cameron’s CAMSERV™ Aftermarket Services. While most providers can’t make that promise, we fulfill it – around the clock, around the globe. Via the world’s largest network, we deliver the tools and the talent, quickly and efficiently, with unmatched OEM expertise. You get what you need, when you need it. Lower total cost of ownership. Ultimate peace of mind, only from CAMSERV. CAMSERV provides expertise, products, and

Aftermarket Regional Contacts:

resources to keep your equipment running at peak performance. • Over 350 dedicated service personnel worldwide • Over 30 strategic locations worldwide • We cover all sizes, brands and applications • Services provided include:

– Replacement valves and parts



– Field service and technical support



– Customer asset management and repair



– Remanufactured products



– Valve integrity management systems

USA / LATIN AMERICA 3250 Briarpark Drive, Suite 300 Houston, TX 77042 USA Toll: +1 800 323 9160 CANADA 8715 50 Ave NW Edmonton, AB, T6E 5H4 Phone: +1 780 440 4144 EUROPE / AFRICA / ME Houstoun Ind Estate, Houstoun Rd. West Lothian, Livingston, Scotland EH54 5BZ United Kingdom Phone: +44 1506 832 000 ASIA PACIFIC 9 Hodgson Way Kewdale, WA 6105 Australia Phone: +08 9352 9900 Fax: +08 9352 9999

19

VALVES & MEASUREMENT

VALVES & MEASUREMENT HEADQUARTERS 3250 Briarpark Drive, Suite 300 Houston, TX 77042 USA Toll: +1 800 323 9160 Alberta, Canada 311 6th Avenue SW, Suite 1300 Calgary, Alberta Canada Phone: +1 403 290 0001 Dubai, UAE Cameron Middle East FZE PO Box 263011 Warehouse RA08MB02 Jebel Ali Dubai, UAE Phone: +971 4883 3542 Europe / Africa / Caspian Houstoun Ind Estate, Houstoun Rd. West Lothian, Livingston, Scotland EH54 5BZ United Kingdom Phone: +44 1506 832 000 Via Prati della Rosa, 16/24 23823 Colico, Lecco Italy Phone +39 (0)341 932211 Via Italo Betto, 11 27058 Voghera, Pavia Italy Phone +39 (0)383 6911 Singapore 2 Gul Circle Singapore, 629560 Singapore Phone: +65 6494 7600

For current contact and location information go to: www.c-a-m.com © Cameron Printed in USA 04/2010-SWP-5M EPV-BRO-PRES