VACUUM GRIPPERS VGS™5010 VGS™5010 BF110P X Patented COAX® technology. X The suction cups are specially designed for X
X
X
X
handling larger parts, such as car body sheets. The soft, flexible lip makes the cup suitable for curved or uneven surfaces and the dual hardness version, PU30/60, is also recommended for rough or rugged surfaces to prevent microleakage, which can occur on plastic or composite work pieces. Available with a two or three-stage COAX® cartridge MIDI. Choose an Si cartridge for extra vacuum flow or a Pi cartridge for high performance at low feed pressure. The three-stage cartridge will give extra high initial vacuum flow, suitable in high speed applications. Easy installation and flexible positioning with several mounting options.
TECHNICAL DATA Description Feed pressure, max. Noise level Temperature range Weight Material
Unit MPa dBA °C g
Value 0.7 73–83 10–50 373–548 Al, SS, NBR, PA, PP, PU
RECOMMENDED LOAD WITH BUILT-IN SAFETY FACTOR OF 2 AND RESPONSE TIME, 30°/60º SHORE COAX® Feed cartridge pressure
Si Si Pi Pi
MPa 0.60 0.60 0.314 0.314
Air consumption Material to Recommended Recommended Response time to Response time to and compressor be handled perpendicular parallel (shear) 50 -kPa with Pi48-2 50 -kPa with Pi48-3 power, continuous (see table load with safety load with safety operation below) factor 2 factor 2 N N s s 1.75 Nl/s, 577W Plywood 94 81 Response time varies based on quality and 1.75 Nl/s, 577W Corrugated 99 81 porosity of handled material 2.0 Nl/s, 660W Dry steel 106 115 0.048 0.046 2.0 Nl/s, 660W Oily steel 105 51 0.048 0.046
RECOMMENDED LOAD WITH BUILT-IN SAFETY FACTOR OF 2 AND RESPONSE TIME, 60º SHORE COAX® Feed cartridge pressure
Si Si Pi Pi
MPa 0.60 0.60 0.314 0.314
Air consumption Material to Recommended Recommended and compressor be handled perpendicular parallel (shear) power, continuous (see table load with safety load with safety operation below) factor 2 factor 2 N N 1.75 Nl/s, 577W Plywood 106 84 1.75 Nl/s, 577W Corrugated 109 80 2.0 Nl/s, 660W Dry steel 128 138 2.0 Nl/s, 660W Oily steel 128 55
Response time to 50 -kPa with Pi48-2
Response time to 50 -kPa with Pi48-3
s s Response time varies based on quality and porosity of handled material 0.048 0.046 0.048 0.046
Remark: The compressor power is calculated according to: 5.5 W consumed electric power per produced Nl/min compressed air, valid for a normally sized 7 bar compressor. Material definition: Corrugated cardboard = B Flute 3 mm, 80 Gurley seconds.
436
Specifications subject to change without notice.
VACUUM GRIPPERS VGS™5010 ORDERING INFORMATION
a b c d e f g h
1. COAX® cartridge No COAX® cartridge (slave unit) COAX® cartridge MIDI Pi48-2 COAX® cartridge MIDI Pi48-3 COAX® cartridge MIDI Pi48-2, non-return valve COAX® cartridge MIDI Pi48-3, non-return valve COAX® cartridge MIDI Si32-2 COAX® cartridge MIDI Si32-3 COAX® cartridge MIDI Si32-2, non-return valve COAX® cartridge MIDI Si32-3, non-return valve
VGS code AA AB AC AD AE AF AG AH AI
i j k i j k
2. Mounting/orientation 4x M6 top, flush mount 4x M6 top, angle bracket M12 20 mm top M12 20 mm right M12 20 mm left M12 20 mm top, angle bracket M12 20 mm right, angle bracket M12 20 mm left, angle bracket
VGS code 00 01 02 03 04 05 06 07
3. Suction cup with fitting No suction cup BF110P 30/60° Shore A BF110P 60° Shore A
Ordering number VGS5010 AB 02 CO
Vacuum grippers VGS™5010
Example VGS™5010 BF110P – Pi48-2, M12 20 mm top, BF110P 30/60° Shore A
VGS code BA CO CP
Specifications subject to change without notice.
437
VACUUM GRIPPERS VGS™5010 VGS™5010 BL50-3P X Patented COAX® technology. X Suitable for high flow applications such as plastic X
X
X X
X
X
bag handling. The design provides enough strength and stability when handling plastic bags, while providing the softness and flexibility required to seal on uneven surfaces. This suction cup is made of DURAFLEX® material and the bellows and sealing lip are of different hardness. The suction cup has a special high-flow fitting. Available with a two or three-stage COAX® cartridge MIDI. Choose an Si cartridge for extra vacuum flow or a Pi cartridge for high performance at low feed pressure. The three-stage cartridge will give extra high initial vacuum flow, suitable in high speed applications. Easy installation and flexible positioning with several mounting options.
TECHNICAL DATA Description Feed pressure, max. Noise level Temperature range Weight Material
Unit MPa dBA °C g
Value 0.7 73–83 10–50 246–421 Al, SS, NBR, PA, PP, PU
RECOMMENDED LOAD WITH BUILT-IN SAFETY FACTOR OF 2 AND RESPONSE TIME, 30°/70º SHORE COAX® Feed cartridge pressure
Air consumption Material to Recommended Recommended Response time to Response time to and compressor be handled perpendicular parallel (shear) 50 -kPa with Pi48-2 50 -kPa with Pi48-3 power, continuous (see table load with safety load with safety operation below) factor 2 factor 2 MPa N N s s Si 0.60 1.75 Nl/s, 577W Plywood 33 26* Response time varies based on quality and Si 0.60 1.75 Nl/s, 577W Corrugated 33 24* porosity of handled material Pi 0.314 2.0 Nl/s, 660W Dry steel 43 19* 0.020 0.019 Pi 0.314 2.0 Nl/s, 660W Oily steel N/A N/A N/A N/A *The suction cup is not intended for handling shear lifts. The values are given as a dimensioning guide to be used when, e.g., the acceleration/ retardation causes shear forces.
Remark: The compressor power is calculated according to: 5.5 W consumed electric power per produced Nl/min compressed air, valid for a normally sized 7 bar compressor. Material definition: Corrugated cardboard = B Flute 3 mm, 80 Gurley seconds.
438
Specifications subject to change without notice.
VACUUM GRIPPERS VGS™5010 ORDERING INFORMATION
a b c d e f g h
1. COAX® cartridge No COAX® cartridge (slave unit) COAX® cartridge MIDI Pi48-2 COAX® cartridge MIDI Pi48-3 COAX® cartridge MIDI Pi48-2, non-return valve COAX® cartridge MIDI Pi48-3, non-return valve COAX® cartridge MIDI Si32-2 COAX® cartridge MIDI Si32-3 COAX® cartridge MIDI Si32-2, non-return valve COAX® cartridge MIDI Si32-3, non-return valve
VGS code AA AB AC AD AE AF AG AH AI
i j k i j k
2. Mounting/orientation 4x M6 top, flush mount 4x M6 top, angle bracket M12 20 mm top M12 20 mm right M12 20 mm left M12 20 mm top, angle bracket M12 20 mm right, angle bracket M12 20 mm left, angle bracket
VGS code 00 01 02 03 04 05 06 07
3. Suction cup with fitting No suction cup BL50-3P 30/70° Shore A
Ordering number VGS5010 AB 02 CX
Vacuum grippers VGS™5010
Example VGS™5010 BL50-3P – Pi48-2, M12 20 mm top, BL50-3P 30/70° Shore A
VGS code BA CX
Specifications subject to change without notice.
439
VACUUM GRIPPERS VGS™5010 VGS™5010 BX75P X Patented COAX® technology. X Suitable for level adjustment and for uneven and X
X X
X
X
porous surfaces such as cardboard, etc. In the two-colored version the bellows and the sealing lip are of different hardness, which makes the suction cup strong and, at the same time, soft and flexible with good sealing capability. A filter disk inside the cup keeps dust out of the system. Available with a two or three-stage COAX® cartridge MIDI. Choose an Si cartridge for extra vacuum flow or a Pi cartridge for high performance at low feed pressure. The three-stage cartridge will give extra high initial vacuum flow, suitable in high speed applications. Easy installation and flexible positioning with several mounting options.
TECHNICAL DATA Description Feed pressure, max. Noise level Temperature range Weight Material
Unit MPa dBA °C g
Value 0.7 73–83 10–50 333–508 Al, SS, NBR, PA, PP, PU
RECOMMENDED LOAD WITH BUILT-IN SAFETY FACTOR OF 2 AND RESPONSE TIME, 30°/60º SHORE COAX® Feed cartridge pressure
Si Si Pi Pi
MPa 0.60 0.60 0.314 0.314
Air consumption Material to Recommended Recommended Response time to Response time to and compressor be handled perpendicular parallel (shear) 50 -kPa with Pi48-2 50 -kPa with Pi48-3 power, continuous (see table load with safety load with safety operation below) factor 2 factor 2 N N s s 1.75 Nl/s, 577W Plywood 62 47* Response time varies based on quality and 1.75 Nl/s, 577W Corrugated 62 48* porosity of handled material 2.0 Nl/s, 660W Dry steel 74 58* 0.034 0.033 2.0 Nl/s, 660W Oily steel 74 32* 0.034 0.033
RECOMMENDED LOAD WITH BUILT-IN SAFETY FACTOR OF 2 AND RESPONSE TIME, 60º SHORE COAX® Feed cartridge pressure
Air consumption Material to Recommended Recommended Response time to Response time to and compressor be handled perpendicular parallel (shear) 50 -kPa with Pi48-2 50 -kPa with Pi48-3 power, continuous (see table load with safety load with safety operation below) factor 2 factor 2 MPa N N s s Si 0.60 1.75 Nl/s, 577W Plywood 62 47* Response time varies based on quality and Si 0.60 1.75 Nl/s, 577W Corrugated 62 48* porosity of handled material Pi 0.314 2.0 Nl/s, 660W Dry steel 83 75* 0.034 0.033 Pi 0.314 2.0 Nl/s, 660W Oily steel 85 48* 0.034 0.033 *The suction cup is not intended for handling shear lifts. The values are given as a dimensioning guide to be used when, e.g., the acceleration/ retardation causes shear forces.
Remark: The compressor power is calculated according to: 5.5 W consumed electric power per produced Nl/min compressed air, valid for a normally sized 7 bar compressor. Material definition: Corrugated cardboard = B Flute 3 mm, 80 Gurley seconds.
440
Specifications subject to change without notice.
VACUUM GRIPPERS VGS™5010 ORDERING INFORMATION
a b c d e f g h
1. COAX® cartridge No COAX® cartridge (slave unit) COAX® cartridge MIDI Pi48-2 COAX® cartridge MIDI Pi48-3 COAX® cartridge MIDI Pi48-2, non-return valve COAX® cartridge MIDI Pi48-3, non-return valve COAX® cartridge MIDI Si32-2 COAX® cartridge MIDI Si32-3 COAX® cartridge MIDI Si32-2, non-return valve COAX® cartridge MIDI Si32-3, non-return valve
VGS code AA AB AC AD AE AF AG AH AI
i j k i j k
2. Mounting/orientation 4x M6 top, flush mount 4x M6 top, angle bracket M12 20 mm top M12 20 mm right M12 20 mm left M12 20 mm top, angle bracket M12 20 mm right, angle bracket M12 20 mm left, angle bracket
VGS code 00 01 02 03 04 05 06 07
3. Suction cup with fitting No suction cup BX75P 30/60° Shore A BX75P 60° Shore A
Ordering number VGS5010 AB 02 CY
Vacuum grippers VGS™5010
Example VGS™5010 BX75P – Pi48-2, M12 20 mm top, BX75P 30/60° Shore A
VGS code BA CY CZ
Specifications subject to change without notice.
441
VACUUM GRIPPERS VGS™5010 VGS™5010 BX110P X Patented COAX® technology. X Suitable for level adjustment and for uneven and X
X X
X
X
porous surfaces such as cardboard, etc. In the two-colored version the bellows and the sealing lip are of different hardness, which makes the suction cup strong and, at the same time, soft and flexible with good sealing capability. A filter disk inside the cup keeps dust out of the system. Available with a two or three-stage COAX® cartridge MIDI. Choose an Si cartridge for extra vacuum flow or a Pi cartridge for high performance at low feed pressure. The three-stage cartridge will give extra high initial vacuum flow, suitable in high speed applications. Easy installation and flexible positioning with several mounting options.
TECHNICAL DATA Description Feed pressure, max. Noise level Temperature range Weight Material
Unit MPa dBA °C g
Value 0.7 73–83 10–50 498–673 Al, SS, NBR, PA, PP, PU
RECOMMENDED LOAD WITH BUILT-IN SAFETY FACTOR OF 2 AND RESPONSE TIME, 30°/60º SHORE COAX® Feed cartridge pressure
Si Si Pi Pi
MPa 0.60 0.60 0.314 0.314
Air consumption Material to Recommended Recommended Response time to Response time to and compressor be handled perpendicular parallel (shear) 50 -kPa with Pi48-2 50 -kPa with Pi48-3 power, continuous (see table load with safety load with safety operation below) factor 2 factor 2 N N s s 1.75 Nl/s, 577W Plywood 143 81* Response time varies based on quality and 1.75 Nl/s, 577W Corrugated 131 77* porosity of handled material 2.0 Nl/s, 660W Dry steel 145 90* 0.100 0.096 2.0 Nl/s, 660W Oily steel 140 47* 0.100 0.096
RECOMMENDED LOAD WITH BUILT-IN SAFETY FACTOR OF 2 AND RESPONSE TIME, 60º SHORE COAX® Feed cartridge pressure
Air consumption Material to Recommended Recommended Response time to Response time to and compressor be handled perpendicular parallel (shear) 50 -kPa with Pi48-2 50 -kPa with Pi48-3 power, continuous (see table load with safety load with safety operation below) factor 2 factor 2 MPa N N s s Si 0.60 1.75 Nl/s, 577W Plywood 139 83* Response time varies based on quality and Si 0.60 1.75 Nl/s, 577W Corrugated 124 80* porosity of handled material Pi 0.314 2.0 Nl/s, 660W Dry steel 147 116* 0.100 0.096 Pi 0.314 2.0 Nl/s, 660W Oily steel 149 63* 0.100 0.096 *The suction cup is not intended for handling shear lifts. The values are given as a dimensioning guide to be used when, e.g., the acceleration/ retardation causes shear forces.
Remark: The compressor power is calculated according to: 5.5 W consumed electric power per produced Nl/min compressed air, valid for a normally sized 7 bar compressor. Material definition: Corrugated cardboard = B Flute 3 mm, 80 Gurley seconds.
442
Specifications subject to change without notice.
VACUUM GRIPPERS VGS™5010 ORDERING INFORMATION
a b c d e f g h
1. COAX® cartridge No COAX® cartridge (slave unit) COAX® cartridge MIDI Pi48-2 COAX® cartridge MIDI Pi48-3 COAX® cartridge MIDI Pi48-2, non-return valve COAX® cartridge MIDI Pi48-3, non-return valve COAX® cartridge MIDI Si32-2 COAX® cartridge MIDI Si32-3 COAX® cartridge MIDI Si32-2, non-return valve COAX® cartridge MIDI Si32-3, non-return valve
VGS code AA AB AC AD AE AF AG AH AI
i j k i j k
2. Mounting/orientation 4x M6 top, flush mount 4x M6 top, angle bracket M12 20 mm top M12 20 mm right M12 20 mm left M12 20 mm top, angle bracket M12 20 mm right, angle bracket M12 20 mm left, angle bracket
VGS code 00 01 02 03 04 05 06 07
3. Suction cup with fitting No suction cup BX110P 30/60° Shore A BX110P 60° Shore A
Ordering number VGS5010 AB 02 CQ
Vacuum grippers VGS™5010
Example VGS™5010 BX110P – Pi48-2, M12 20 mm top, BX110P 30/60° Shore A
VGS code BA CQ CR
Specifications subject to change without notice.
443
VACUUM GRIPPERS VGS™5010 VGS™5010 F110P X Patented COAX® technology. X Suitable for all flat and rough surfaces. X Good stability and little inherent movement due
to high friction of the rubber material. X Recommended when the lifting force is parallell
to the surface of the object. X Available with a two or three-stage COAX® cartridge MIDI. Choose an Si cartridge for extra vacuum flow or a Pi cartridge for high performance at low feed pressure. X The three-stage cartridge will give extra high initial vacuum flow, suitable in high speed applications. X Easy installation and flexible positioning with several mounting options.
TECHNICAL DATA Description Feed pressure, max. Noise level Temperature range Weight Material
Unit MPa dBA °C g
Value 0.7 73–83 10–50 400–576 Al, SS, NBR, PA, PP, PU
RECOMMENDED LOAD WITH BUILT-IN SAFETY FACTOR OF 2 AND RESPONSE TIME, 30°/60º SHORE COAX® Feed cartridge pressure
Si Si Pi Pi
MPa 0.60 0.60 0.314 0.314
Air consumption Material to Recommended Recommended Response time to Response time to and compressor be handled perpendicular parallel (shear) 50 -kPa with Pi48-2 50 -kPa with Pi48-3 power, continuous (see table load with safety load with safety operation below) factor 2 factor 2 N N s s 1.75 Nl/s, 577W Plywood 261 195 Response time varies based on quality and 1.75 Nl/s, 577W Corrugated 181 166 porosity of handled material 2.0 Nl/s, 660W Dry steel 335 308 0.024 0.024 2.0 Nl/s, 660W Oily steel 304 95 0.024 0.024
RECOMMENDED LOAD WITH BUILT-IN SAFETY FACTOR OF 2 AND RESPONSE TIME, 60º SHORE COAX® Feed cartridge pressure
Si Si Pi Pi
MPa 0.60 0.60 0.314 0.314
Air consumption Material to Recommended Recommended Response time to Response time to and compressor be handled perpendicular parallel (shear) 50 -kPa with Pi48-2 50 -kPa with Pi48-3 power, continuous (see table load with safety load with safety operation below) factor 2 factor 2 N N s s 1.75 Nl/s, 577W Plywood 261 145 Response time varies based on quality and 1.75 Nl/s, 577W Corrugated 154 149 porosity of handled material 2.0 Nl/s, 660W Dry steel 352 332 0.024 0.024 2.0 Nl/s, 660W Oily steel 304 161 0.024 0.024
Remark: The compressor power is calculated according to: 5.5 W consumed electric power per produced Nl/min compressed air, valid for a normally sized 7 bar compressor. Material definition: Corrugated cardboard = B Flute 3 mm, 80 Gurley seconds.
444
Specifications subject to change without notice.
VACUUM GRIPPERS VGS™5010 ORDERING INFORMATION
a b c d e f g h
1. COAX® cartridge No COAX® cartridge (slave unit) COAX® cartridge MIDI Pi48-2 COAX® cartridge MIDI Pi48-3 COAX® cartridge MIDI Pi48-2, non-return valve COAX® cartridge MIDI Pi48-3, non-return valve COAX® cartridge MIDI Si32-2 COAX® cartridge MIDI Si32-3 COAX® cartridge MIDI Si32-2, non-return valve COAX® cartridge MIDI Si32-3, non-return valve
VGS code AA AB AC AD AE AF AG AH AI
i j k i j k
2. Mounting/orientation 4x M6 top, flush mount 4x M6 top, angle bracket M12 20 mm top M12 20 mm right M12 20 mm left M12 20 mm top, angle bracket M12 20 mm right, angle bracket M12 20 mm left, angle bracket
VGS code 00 01 02 03 04 05 06 07
3. Suction cup with fitting No suction cup F110P 30/60° Shore A F110P 60° Shore A
Ordering number VGS5010 AB 02 CS
Vacuum grippers VGS™5010
Example VGS™5010 F110P – Pi48-2, M12 20 mm top, F110P 30/60° Shore A
VGS code BA CS CT
Specifications subject to change without notice.
445
VACUUM GRIPPERS VGS™5010 VGS™5010 OB65X170P X Patented COAX® technology. X Suitable for level adjustment and for uneven,
X X
X
X
X
porous and oblong surfaces such as cardboard boxes. Can handle objects with height differences. Lifting movement to separate small and thin objects. In the two-colored version the bellows and the sealing lip are of different hardness, which makes the suction cup strong and, at the same time, soft and flexible with good sealing capability. Available with a two or three-stage COAX® cartridge MIDI. Choose an Si cartridge for extra vacuum flow or a Pi cartridge for high performance at low feed pressure. The three-stage cartridge will give extra high initial vacuum flow, suitable in high speed applications. Easy installation and flexible positioning with several mounting options.
TECHNICAL DATA Description Feed pressure, max. Noise level Temperature range Weight Material
Unit MPa dBA °C g
Value 0.7 73–83 10–50 503–679 Al, SS, NBR, PA, PP, PU
RECOMMENDED LOAD WITH BUILT-IN SAFETY FACTOR OF 2 AND RESPONSE TIME, 30°/60º SHORE COAX® Feed cartridge pressure
Si Si Pi Pi
MPa 0.60 0.60 0.314 0.314
Air consumption Material to Recommended Recommended and compressor be handled perpendicular parallel (shear) power, continuous (see table load with safety load with safety operation below) factor 2 factor 2 N N 1.75 Nl/s, 577W Plywood 214 231 1.75 Nl/s, 577W Corrugated 154 190 2.0 Nl/s, 660W Dry steel 265 259 2.0 Nl/s, 660W Oily steel 239 146
Response time to 50 -kPa with Pi48-2
Response time to 50 -kPa with Pi48-3
s s Response time varies based on quality and porosity of handled material 0.075 0.073 0.075 0.073
RECOMMENDED LOAD WITH BUILT-IN SAFETY FACTOR OF 2 AND RESPONSE TIME, 60º SHORE COAX® Feed cartridge pressure
Si Si Pi Pi
MPa 0.60 0.60 0.314 0.314
Air consumption Material to Recommended Recommended Response time to Response time to and compressor be handled perpendicular parallel (shear) 50 -kPa with Pi48-2 50 -kPa with Pi48-3 power, continuous (see table load with safety load with safety operation below) factor 2 factor 2 N N s s 1.75 Nl/s, 577W Plywood 219 202 Response time varies based on quality and 1.75 Nl/s, 577W Corrugated 100 186 porosity of handled material 2.0 Nl/s, 660W Dry steel 272 300 0.075 0.073 2.0 Nl/s, 660W Oily steel 260 200 0.075 0.073
Remark: The compressor power is calculated according to: 5.5 W consumed electric power per produced Nl/min compressed air, valid for a normally sized 7 bar compressor. Material definition: Corrugated cardboard = B Flute 3 mm, 80 Gurley seconds.
446
Specifications subject to change without notice.
VACUUM GRIPPERS VGS™5010 ORDERING INFORMATION
a b c d e f g h
1. COAX® cartridge No COAX® cartridge (slave unit) COAX® cartridge MIDI Pi48-2 COAX® cartridge MIDI Pi48-3 COAX® cartridge MIDI Pi48-2, non-return valve COAX® cartridge MIDI Pi48-3, non-return valve COAX® cartridge MIDI Si32-2 COAX® cartridge MIDI Si32-3 COAX® cartridge MIDI Si32-2, non-return valve COAX® cartridge MIDI Si32-3, non-return valve
VGS code AA AB AC AD AE AF AG AH AI
i j k i j k
2. Mounting/orientation 4x M6 top, flush mount 4x M6 top, angle bracket M12 20 mm top M12 20 mm right M12 20 mm left M12 20 mm top, angle bracket M12 20 mm right, angle bracket M12 20 mm left, angle bracket
VGS code 00 01 02 03 04 05 06 07
3. Suction cup with fitting No suction cup OB65x170P 30/60° Shore A OB65x170P 60° Shore A
Ordering number VGS5010 AB 02 CU
Vacuum grippers VGS™5010
Example VGS™5010 OB65x170P – Pi48-2, M12 20 mm top, OB65x170P 30/60° Shore A
VGS code BA CU CV
Specifications subject to change without notice.
447
VACUUM GRIPPERS VGS™5010 VGS™5010 MOUNTING-KITS X Easy attachment to standard extrusion and
profile systems X Flexible positioning X Quick setup and change-over X Durable and non-rotating installation
TECHNICAL DATA Description Material Weight
448
Unit
g
Value 0114162 Al, SS, PA, NBR 34.8
0114163 Al, SS, Steel, PA, NBR 133.1
0114164 SS, Steel, PA, NBR 58.7
0114152 SS, Steel, PA, NBR 154.1
Specifications subject to change without notice.
VACUUM GRIPPERS VGS™5010 ORDERING INFORMATION A B C D
Description 4x M6 top, flush mount 4x M6 top, angle bracket M12 20 mm top M12 20 mm top, angle bracket
A
Art. No. 0114162 0114163 0114164 0114152
B
C
D
Specifications subject to change without notice.
Vacuum grippers VGS™5010
Angle bracket included in B & D
449