V.35 Connector System Table Of Contents
V.35
Description
Page
Right Angle Headers Specifications .................................................................................................. 3 Outline Drawings ............................................................................................. 4 Ordering Information ....................................................................................... 5
Right Angle Headers — Short Footprint Specifications .................................................................................................. 6 Outline Drawings ............................................................................................. 7 Ordering Information ....................................................................................... 8
V.35 Accessories
9
Moldings ........................................................................................................ 10 Contacts ............... Screw Machined ............................................................. 11 Stamped and Formed .................................................... 12 Hoods ............................................................................................................ 13 Shells ............................................................................................................. 14 Tooling ........................................................................................................... 15
While the information in this publication is believed to be accurate and reliable, all data presented is subject to change without notice. Winchester Electronics disclaims responsibility for any damages resulting from application or any incompleteness or inaccuracies in the information presented. Consult factory for specific information on the latest design specifications.
Winchester Electronics © 1999, Winchester Electronics 400 Park Road
■
Watertown, Connecticut 06795-0500
■
Phone: (860) 945-5000
■
FAX: (860) 945-5191
■
Internet: http://www.litton-wed.com
V.35 TMRACV Series FEATURES UL V-O rated molding material. ■ Conformance to MIL-C-28748. ■ High reliable screw machine contacts ■ Unique hold down device ■
V.35 Right Angle Header Connector ISO International Standard 2593 Pick-up Photo From Film Old Page RP / 20
The TMRACV series is a right angle socket rack and panel connector which meets the International Standard (ISO) 2593 for data communication 34 pin DTE/ DCE interface connector and pin assignments.
This connector is available fully loaded with 34 socket contacts, or can be ordered selectively loaded.
MATERIALS AND FINISHES Molding, Female TMRACV: Polyester Thermoplastic, Color-Black Socket Contacts: Closed entry (mates with size 16, .062/ 1.57 Dia. male contact). Gold over nickel. Solder Tail tin lead over nickel. Fixed Jacks: Stainless steel, nickel plated brass. Mounting Bracket: Brass. Tin lead over nickel.
PERFORMANCE CHARACTERISTICS Conforms To: MIL-C-28748 Current Rating: 7.5 amps Insulation Resistance: 5000 megohms min. Dielectric Withstanding Voltage (at sea level): 2000 VAC Operating Temperature Range: -55oC to 125oC
SPECIFICATIONS
CSA Certified File No.
®
LR34182
Recognized under the Component Program of Underwriters Laboratories Inc. File No. E31650
®
Winchester Electronics 400 Park Road
■
Watertown, Connecticut 06795-0500
■
Phone: (860) 945-5000
■
FAX: (860) 945-5191
■
Internet: http://www.litton-wed.com
V.35 / 3
V.35 V.35 Right Angle Header Connector ISO International Standard 2593
TMRACV Series OUTLINE Dimensions are for reference only and are subject to change. Outline drawings on request.
Mounting Brackets
Catalog No. TMRACV34SF1 Shown
OUTLINE RECOMMENDED P.C.B. LAYOUT .062 Board Thickness
Winchester Electronics 400 Park Road
V.35 / 4
■
Watertown, Connecticut 06795-0500
■
Phone: (860) 945-5000
■
FAX: (860) 945-5191
■
Internet: http://www.litton-wed.com
V.35 TMRACV Series
V.35 Right Angle Header Connector ISO International Standard 2593
ORDERING INFORMATION Right Angle Header With Standard Screw Machined Contacts
TMRACV
■ Step 1 Insert Series Code: TMRACV
34
S
■ Step 2
■ Step 3
■ Step 4
No. Of Total Contact Positions:
Contact Type: S: Standard screw machined socket contact
F: Fixed Jacksocket and Jackscrew, stainless steel
34
F
XXXX
■ Step 5 Mounting Brackets: 1: Snap mount bracket 2: 4-40 Thread 3: Thru-hole 4: No bracket
■ Step 6
Selective Contact Loading: Four digit numerical code. Contact Winchester’s sales department
Right Angle Header With Multi-Finger Contact
TMRACV
■ Step 1 Insert Series Code: TMRACV
■ Step 2 No. Of Total Contact Positions:
34
■ Step 3 Contact Type: F: Multi-Finger Socket Contact
34
F
■ Step 4 F: Fixed Jacksocket and Jackscrew, nickel plated brass
F
XXXX
■ Step 5 Mounting Brackets: 1: Snap mount bracket (For other options consult factory)
■ Step 6
Selective Contact Loading: Four digit numerical code. Contact Winchester’s sales department
Winchester Electronics 400 Park Road
■
Watertown, Connecticut 06795-0500
■
Phone: (860) 945-5000
■
FAX: (860) 945-5191
■
Internet: http://www.litton-wed.com
V.35 / 5
V.35 TMRAV Series
V.35 Short Footprint Right Angle Header Connector
FEATURES ■ UL
V-O rated molding material. to MIL-C-28748. ■ High reliable screw machine contacts ■ Unique hold down device ■ Conformance
The TMRAV series is a short footprint V.35 compatable interface, right angle connector. This connector can be ordered fully loaded with 34 contacts or selectively loaded to customer specifications.
SPECIFICATIONS MATERIALS AND FINISHES Molding, Female: Polyester Thermoplastic, Color-Black Socket Contacts: Copper Alloy. Gold over Nickel. Mates with size 16, .062/ 1.57 Dia. male contact. Fixed Jacks: Nickel plated Brass Mounting Bracket:
Brass. Tin lead over nickel.
PERFORMANCE CHARACTERISTICS Conforms To: MIL-C-28748 Current Rating: 7.5 amps Insulation Resistance: 5000 megohms min. Dielectric Withstanding Voltage (at sea level): 2000 VAC Operating Temperature Range: -55 oC to 125oC
Winchester Electronics 400 Park Road
V.35 / 6
■
Watertown, Connecticut 06795-0500
■
Phone: (860) 945-5000
■
FAX: (860) 945-5191
■
Internet: http://www.litton-wed.com
V.35 TMRAV Series
V.35 Short Footprint Right Angle Header Connector
OUTLINE Dimensions are for reference only and are subject to change. Outline drawings on request.
Catalog Number TMRAV34FF1 Shown
Winchester Electronics 400 Park Road
■
Watertown, Connecticut 06795-0500
■
Phone: (860) 945-5000
■
FAX: (860) 945-5191
■
Internet: http://www.litton-wed.com
V.35 / 7
V.35 TMRAV Series
V.35 Short Footprint Right Angle Header Connector
OUTLINE RECOMMENDED P.C.B. LAYOUT Dimensions are for reference only and are subject to change. Outline drawings on request.
ORDERING INFORMATION TMRAV
34
F
F
XXXX
■ Step 1
■ Step 2
■ Step 3
■ Step 4
■ Step 5
Insert Series Code: TMRAV
No. Of Total Contact Positions: 34
Contact Type: F: Multi-Finger Socket Contact
F: Polarized Fixed Jacksocket and Jackscrew
Mounting Brackets: 1: Snap mount bracket (For other options consult factory)
■ Step 6 Selective Contact Loading: Four digit numerical code. Contact Winchester’s sales department
Winchester Electronics 400 Park Road
V.35 / 8
■
Watertown, Connecticut 06795-0500
■
Phone: (860) 945-5000
■
FAX: (860) 945-5191
■
Internet: http://www.litton-wed.com
V.35 V.35 Cable Accessories
FEATURES ■ Male / Female
Moldings available for both screw machine and stamped and formed contacts. ■ Formed hoods with NI plated turning jackscrew hardware.
■ Hoods
available in both conductive and nonconductive finishes with various cable ranges. ■ Protective shells available.
Winchester Electronics 400 Park Road
■
Watertown, Connecticut 06795-0500
■
Phone: (860) 945-5000
■
FAX: (860) 945-5191
■
Internet: http://www.litton-wed.com
V.35 / 9
V.35 TMRAC Series
Moldings For Screw Machined And Stamped & Formed Removable Contacts
FOR SCREW MACHINED REMOVABLE CONTACTS MATERIAL TMRAC: Polyester Thermoplastic, Color - Black Note: See page number V-11 for screw machined contacts
TMRAC34P8
TMRAC34S8
FOR STAMPED & FORMED REMOVABLE CONTACTS MATERIAL: Thermoplastic Polyester COLOR: Black
TMRAC34M
TMRAC34F
Winchester Electronics 400 Park Road
V.35 / 10
■
Watertown, Connecticut 06795-0500
■
Phone: (860) 945-5000
■
FAX: (860) 945-5191
■
Internet: http://www.litton-wed.com
V.35 100 Series
Screw Machined Contacts
SPECIFICATIONS MATERIALS AND FINISHES
PERFORMANCE CHARACTERISTICS
Pin Contact:
Copper alloy, gold plated
Size:
Closed entry, copper alloy, gold plated
Current Rating: 13 amps maximum
Socket Contact:
16 16-30 AWG
Insulation Resistance:
5000 Megohms
Operating Temperature:
-55 oC to 125oC
ORDERING INFORMATION PIN Part Numbers AWG
LOOSE
REELED
16-20 20-24 22-26 24-28 26-30
100-1016P 100-1020P 100-1022P 100-1024P 100-1026P
100-0911P 100-0915P 100-0907P 100-0917P 100-0963P
Socket Part Numbers AWG
LOOSE
REELED
16-20 20-24 22-26 24-26 26-30
100-1016S 100-1020S 100-1022S 100-1024S 100-1026S
100-0921S 100-0925S 100-0908S 100-0927S 100-0965S
Winchester Electronics 400 Park Road
■
Watertown, Connecticut 06795-0500
■
Phone: (860) 945-5000
■
FAX: (860) 945-5191
■
Internet: http://www.litton-wed.com
V.35 / 11
V.35 100 Series
Stamped / Formed Contacts
SPECIFICATIONS MATERIALS AND FINISHES
PERFORMANCE CHARACTERISTICS
Pin Contact:
Copper alloy, gold plated
Size:
Rentention Clip:
Stainless Steel
Current Rating: 13 amps maximum
Socket Contact:
Closed entry, copper alloy, gold plated
16 16-30 AWG
Insulation Resistance:
5000 Megohms
Operating Temperature:
-55oC to 125oC
ORDERING INFORMATION PIN Part Numbers AWG
STRIP
16-18 20-24 24-26 26-30
100-80907P 100-80901P 100-80903P 100-80905P
Socket Part Numbers AWG
STRIP
16-18 20-24 24-26 26-30
100-80908S 100-80902S 100-80904S 100-80906S
Winchester Electronics 400 Park Road
V.35 / 12
■
Watertown, Connecticut 06795-0500
■
Phone: (860) 945-5000
■
FAX: (860) 945-5191
■
Internet: http://www.litton-wed.com
V.35 MRA Series
Drawn Hoods With NI Plated Jackscrew Set
ORDERING INFORMATION Part Number
Plating
Hood Finish
Cable Clamp Plating
Cable Range
MRA34JTDH5199
Chromate (Clear)
Conductive
NI Plated ABS
.180-.250
MRA34JTDH5334
“
“
“
.250-.400
MRA34JTDH85279
“
“
“
.400-.600
MRA34JTDH5340
“
“
Black ABS
.180-.250
MRA34JTDH5341
“
“
“
.250-.400
MRA34JTDH85342
“
“
“
.400-.600
MRA34JTDH5267
Anodized Black
Non-Conductive
NI Plated ABS
.180-.250
MRA34JTDH5339
“
“
“
.250-.400
MRA34JTDH85308
“
“
“
.400-.600
MRA34JTDH5343
“
“
Black ABS
.180-.250
MRA34JTDH5344
“
“
“
.250-.400
MRA34JTDH85284
“
“
“
.400-.600
Winchester Electronics 400 Park Road
■
Watertown, Connecticut 06795-0500
■
Phone: (860) 945-5000
■
FAX: (860) 945-5191
■
Internet: http://www.litton-wed.com
V.35 / 13
V.35 XMRE Series
Shells
HOOD ASSEMBLIES
Plug / Receptacle Shell
ORDERING INFORMATION Plug XMRE34-5000 XMRE34-5000 AB XMRE34-5000CH
Receptacle
Plating
Finish
XMRE34-9000 XMRE34-9000AB XMRE34-9000CH
Anodized Yellow Anodized Black Chromate Clear
Non-Conductive Non-Conductive Conductive
Winchester Electronics 400 Park Road
V.35 / 14
■
Watertown, Connecticut 06795-0500
■
Phone: (860) 945-5000
■
FAX: (860) 945-5191
■
Internet: http://www.litton-wed.com
V.35 107 Series
Crimping Tools For Screw Machined Contacts
CRIMPING TOOLS
Automatic Feed Crimping Tool
Hand Operated Crimping Tool
600/1200 Crimps Per Hour Catalog Number 107-0961
200/300 Crimps Per Hour Catalog Number 107-0903-2A (Mil-T-22520 Class II Equivalent)
Removable Contact Insertion Tool
Removable Contact Removal Tool
Catalog Number 107-1015
Catalog Number 107R-1005
TOOL ACCESSORIES Stamped and formed tooling available — consult factory
Winchester Electronics 400 Park Road
■
Watertown, Connecticut 06795-0500
■
Phone: (860) 945-5000
■
FAX: (860) 945-5191
■
Internet: http://www.litton-wed.com
V.35 / 15
