Use the car seat ISEOS ISOFIX

Use the car seat ISEOS ISOFIX Made with Peoplbrain - www.peoplbrain.com Use the car seat ISEOS ISOFIX Created by : Allobébé This how to guide is do...
Author: Eugene Sutton
3 downloads 0 Views 10MB Size
Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Use the car seat ISEOS ISOFIX

Created by : Allobébé This how to guide is doable in : 10 to 20 min and the level is : Easy

How to use the car seat ISEOS ISOFIX

1 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 1/71

First glance, first smiles, first words, first steps: a baby is a lot of unforgettable moments in perspective. It's also, every day a thousand moments of complicity and find that you have to heart to share fully in family. For you and your child, we all expected that, day after day, you can enjoy 100% of the essential: to live the happiness of being together intensely. So treat yourself!

Step : 2/71

GR 1 : 9 to 18 kg

2 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 3/71

DESCRIPTION 1 - Clip (for use with 3 point car seat-belt) 2 - Strap buckle (for use with 3 point car seat-belt) 3 - Installation sticker for use with 3 point car seat-belt 4 - Keep the instructions in the special pocket (on the back of the seat) 17 - Installation indicator for ISOFIX lower anchorage latches 18 - ISOFIX Installation sticker 19 - ISOFIX lower anchorage latches

Step : 4/71

19 - ISOFIX lower anchorage latches 20 - Handle for retracting ISOFIX latches (under the base) 21 - Storage net for anchorage strap for upper ISOFIX installation 22 - Anchoring strap for upper ISOFIX installation “Top Tether” 23 - “Top Tether” tension adjuster 24 - “Top Tether” tension indicator 25 - Clasp to anchor the “Top Tether”

3 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 5/71

DESCRIPTION 5 - Base 6 - Side piece 7 - Fabric 8 - Chest pad 9 - Harness support 10 - 5 point harness 11 - Harness buckle cover 12 - Adjuster for harness fit 13 - Strap for harness fit 14 - Adjuster knob for seat width 15 - Adjuster knob for seat angle Step : 6/71 16 - Release system for ISOFIX lower anchorage latches IMPORTANT • All Bébé Confort products have been carefully designed and tested for your baby’s safety and comfort. Use only accessories sold or approved by Bébé Confort. • Using other accessories may prove to be dangerous. • Please read these instructions carefully and make yourself familiar with the child seat before using it. • Always keep the instructions for future reference; there is a storage pocket specifically provided on the child seat. UNIVERSAL ISOFIX SYSTEM: • Group 1 car seat (children from 9 to 18 Kg) - ISOFIX classification B1 - ISOFIX UNIVERSAL approved. • To use the ISOFIX UNIVERSAL fixing system, it is ESSENTIAL to read the car handbook, before installing the child car seat. • It will show you which points are compatible with the classification of the ISOFIX UNIVERSAL approved child car seat. • IMPORTANT: never use both the ISOFIX fixing system and the car seat-belt to install the child car seat • IMPORTANT: when using ISOFIX it is not enough to connect just the lower anchorage latches to the vehicle. It is essential to fix the “Top Tether” to the upper anchorage provided by the vehicle manufacturer. UNIVERSAL SYSTEM WITH A 3 POINT SEAT-BELT: • IMPORTANT: never use both the ISOFIX fixing system and the car seat-belt to install the child car seat. • When the car seat is used in combination with an adult safety belt, It can be installed only in the vehicles listed, equipped with 3 point/static/inertia reel safety-belts that conform to EEC Regulation N° 16 or other equivalent standards. • After putting the child in the car seat, ensure that the car seat-belt is sufficiently taut by pulling the belt. Ensure also that the belt does not become twisted THE CHILD: • Never leave a child unsupervised. • Even a gentle impact on a vehicle can turn a child into a projectile. • For your own safety and that of your child, always put the child in the child car seat, however short your journey may be. • Ensure that the straps under the stomach lie as low as possible, to properly support the pelvis. • The temperature inside a vehicle may become very high, particularly after a long period of exposure to the sun. It is strongly 4 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com recommended, under such conditions, to cover the seat of the car with a piece of material or something equivalent to prevent the harness fixings, and in particular the metal parts, from becoming hot and burning the child.

Step : 7/71 OTHER INSTRUCTIONS: • The child car seat is to be installed facing forwards. Never install this child car seat facing backwards. • The manufacturer’s liability is limited to what is covered under the European Regulation (R44). This approval does not remove the necessity for care and respect for the Highway Code. • This child restraint is effective only if the instructions for use are respected. • Always fasten the child restraint even when the child is not sitting in it. • The user must always check that any luggage and other objects likely to cause injury to the occupant of the car seat in the case of impact are properly secured. • Never place heavy objects on the rear parcel shelf, to avoid the danger of projectiles in the event of an accident. • The rigid parts and the plastic sections of a child restraint device should be positioned and installed in such a way that they cannot, under normal conditions of use of the vehicle, become trapped under a moving seat or in the vehicle door. • Always check that no part of the seat or the harness is trapped under a seat or in the vehicle door. • It is essential that the car seat be replaced after an accident. • Never modify the construction or the materials of the car seat and its straps without consulting the manufacturer. • Do not use the child restraint device without the cover. Do not replace the seat cover with a cover other than that recommended by the manufacturer, because it will have a direct effect on the functioning of the child restraint. • If in any doubt about the correct installation or use of the system, the user is advised to contact the distributor or the manufacturer of the child restraining device system. SYMBOLS: Consult the vehicle handbook Consult the car seat instructions The ISOFIX logo (see installation sticker) Seat using an ISOFIX «Top tether» upper anchoring strap ISEOS ISOFIX UNIVERSAL Direction facing forwards Rear seat * Classification B1** Group 1 9 to18 kg * The child seat must be placed on the rear seat of the vehicle or, exceptionally, in the front depending on the current legislation in the country of use. Your ISEOS car seat is ISOFIX UNIVERSAL approved. Under the latest changes in regulations, it is suitable for all vehicles that have the ISOFIX UNIVERSAL system built in. ** Consult the vehicle handbook, where the manufacturer will have indicated the position of the 3 seat anchorage points in the vehicle. WHERE SHOULD IT BE FITTED? • Consult the vehicle handbook where you will find the positions recommended by the manufacturer for the installation of an ISOFIX UNIVERSAL car seat, classification B1. • Check that the position selected corresponds to the classification of your car seat (classification B1). • Move the front passenger seat forward so that the child does not bump into it.

5 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 8/71

Upper anchoring strap for ISOFIX (Top Tether) Lower ISOFIX anchorage latches

Step : 9/71

Pass the «Top Tether» between the top of the back of the vehicle seat and the headrest. Never pass the Top Tether over the vehicle headrest.

6 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 10/71

IMPORTANT: ensure that the anchorage point used for the “Top Tether” is in fact an anchorage point intended for this purpose. Check that you do not confuse it with a ring intended for securing luggage.

Step : 11/71 WARNING ISEOS WITH A SEAT-BELT Direction facing forwards Position Rear seats * Group 1 9 to18 kg * The child seat must be placed on the rear seat of the vehicle or exceptionally on the front seat depending on the current legislation in the country of use.

7 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 12/71

This device should be used only on approved vehicles equipped with 3 point/static/ inertia reel seat-belts that are approved in accordance with EEC/ UN regulation N° 16 or other equivalent standard.

Step : 13/71

Move the front passenger seat forward so that the child does not bump into it.

8 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 14/71

Check that the child seat is properly installed. It is important for your child’s safety that you fit the belt correctly. The vehicle belt must be fixed along the red markings/ location points on the isofix bebe confort iseos seat. Please also read the label on the side of the isofix bebe confort iseos seat. Never fit the belt in any way other than that shown.

Step : 15/71

IMPORTANT : Only use this procedure to return the isofix latches inside the base if you have brought them out in error. 1 - Unhook the release tool held by two hooks on the left side of the seat.

9 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 16/71

2 - Clip the release tool onto the isofix latches.

Step : 17/71

3 - A’ Slide the yellow catch upwards A» While holding the catch in this position, pull the black lever until you hear the click of the two latches being released.

10 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 18/71

4 - Remove the tool and push the latches into the base of the seat.

Step : 19/71

5 - Keep this tool stored on the side of the seat.

11 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 20/71

PREPARING TO INSTALL ISOFIX 1 - Find the lower ISOFIX anchorage points in your vehicle handbook.

Step : 21/71

2- Clip the «ISOFIX latch» guides onto each of the ISOFIX lower anchorage points on the vehicle seat. Use of the guides is optional. It makes no difference to the effectiveness of the child car seat. The guides make it easier to access the lower ISOFIX anchorage points.

12 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 22/71

3 - Take the “Top Tether” out of the net. Pull out the “Top Tether” by pressing the button (1) of the tension adjuster, and then (2) pulling the belt.

Step : 23/71

4 - Use the handle under the car seat to bring out the ISOFIX lower anchorage latches. WARNING! The latches can only be retracted after the car seat has been clipped into and then unclipped from the vehicle, or by using the release tool provided (see attached instructions).

13 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 24/71

INSTALLING ISOFIX equipped with the ISOFIX UNIVERSAL system. Before installation all the ISOFIX indicators must be showing red. 1 - Clip the ISOFIX latches into the two ISOFIX lower anchorage points on the vehicle. IMPORTANT: the ISOFIX indicator changes to show green, only when the 2 ISOFIX latches are correctly locked in place.

Step : 25/71

Installation in a vehicle 2 - Press the ISEOS ISOFIX car seat firmly against the back of the vehicle seat, by pushing evenly and firmly on the base.

14 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 26/71

3 - «Top tether» anchoring point/ anchoring device (depending on the vehicle). Consult your vehicle handbook, to find the “Top Tether” anchorage point. IMPORTANT: ensure that the anchorage point used for the “Top Tether” is in fact an anchorage point intended for this purpose. Check that you do not confuse it with a ring intended for securing luggage.

Step : 27/71

INSTALLING ISOFIX Depending on vehicle 4a / 4b / 4c / 4d / 4e

15 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 28/71

4 - Hook the “Top Tether” strap to the anchorage point as shown with the spring hook. To tighten the top tether strap more easily pull the top of the seat towards the vehicle seat. IMPORTANT: the indicator changes to show green.

Step : 29/71

IMPORTANT! Ensure that no luggage interferes with the tension or the adjustment of the “Top Tether” strap. After fitting the Top Tether please store the loose end of the strap either in the storage net or in the boot but not within the child’s reach.

16 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 30/71

IMPORTANT : you have completed the installation of “ISOFIX” for your ISEOS car seat. • Check that the ISOFIX installation indicators are showing green. • Ensure that the “Top Tether” strap does not become twisted. • Do not use the seat if either of the warning indicators remains at red.

Step : 31/71

REMOVING “ISOFIX” To release the Iséos ISOFIX seat: 1 - (A) Press the button (1) on the adjuster and (2) pull on the strap, and the warning indicator will show red. (B) Unhook the “Top Tether”.

17 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 32/71

2 - (A’) Slide the safety catch upwards. (A’’) Holding up the safety catch, pull the lever until the 2 ISOFIX latches are released. (B) Hold the lever (A) in the release position, while pulling the seat forward.

Step : 33/71

3 - After releasing the lower ISOFIX anchorage latches, slot them into the base using the handle under the base. Important : the ISOFIX latches can only be retracted into the base after they have been clipped into and then out of the vehicle seat, or by using the release tool provided (see attached instructions).

18 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 34/71

4 - Roll up the “Top Tether” strap and store it in the net provided. IMPORTANT: when the “Top Tether” is not in use, always put it away in the net provided. In the event of an accident, it could cause injuries to the occupants of the vehicle.

Step : 35/71

INSTALLATION WITH A SEAT-BELT Installation with a 3 point seat-belt for vehicles not equipped with ISOFIX. The child car seat is to be installed facing forwards. 1 - Put the ISEOS car seat into the reclined position by turning the knob to the left.

19 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 36/71

2 - Pass the seat-belt between the base and the seat of the child seat,

Step : 37/71

3 - Take the seat-belt from the other side of the car seat and fasten securely. Then pull firmly on the seat-belt.

20 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 38/71

4 - Pass the strap through the strap buckle only on the side with the seat belt inertia reel and lock it.

Step : 39/71

5 - Tighten the seat-belt by pulling very firmly on the diagonal strap (the strap buckle has a non-return mechanism to keep the strap taut).

21 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 40/71

Slide the seat-belt through the seat-belt lock at the top of the car seat backrest and pull it tight. IMPORTANT you have completed the installation of the child car seat, with the 3 point car safety belt. • Check that the child car seat is stable. • Check that the seat-belt is securely fastened and that it is not twisted. • Check that the strap buckle is properly fastened and the seat-belt taut

Step : 41/71

PLACING THE CHILD IN THE CAR SEAT PLACE THE CHILD IN THE CHILD SEAT 1 - Fasten the harness shoulder straps and the buckle cover to their hooks.

22 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 42/71

2 - Place the child in the seat, and then unhook the harness shoulder straps from their hooks, and unhook the buckle cover from the adjustment knob.

Step : 43/71

3 - Fasten together parts (a) and (b), and then push them into the buckle (c) until you hear a Click!

23 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 44/71

4 - Pull firmly on the chest pads on the shoulder straps to put them in the proper place.

Step : 45/71

5 - Pull on the adjustment strap to adjust the harness shoulder straps to fit the child.

24 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 46/71

TAKING THE CHILD OUT 6 - Press the adjuster while pulling on the harness shoulder straps (hold the shoulder straps and not the chest pads). Press the red button on the harness buckle to release it.

Step : 47/71

7 - Fasten the harness shoulder straps and the buckle cover to their hooks.

25 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 48/71

Adjusting the height of the harness shoulder straps The harness should be adjusted to the size of the child by adjusting the shoulder straps.Take the car seat out of the vehicle before adjusting the shoulder straps.Ensure you do not twist the harness while adjusting it and that you replace all the element correctly.The harness shoulder straps should be level with or just above the child’s shoulder

Step : 49/71

1 - Before starting to adjust the fit, check that the harness is fastened. Press the adjuster and pull the shoulder straps out fully.

26 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 50/71

2 - Put the car seat in the reclining position, and then remove the instructions wallet.

Step : 51/71

3 - Take out the shoulder strap catch plate, and unhook the shoulder straps.

27 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 52/71

4 - From the front of the car seat, pull on the shoulder straps to pull them out of the chest pads. Put the car seat back in the upright position.

Step : 53/71

5 - From behind the seat, pass the protective plates for the shoulder straps through the slits in the backrest.

28 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 54/71

6 - Select the desired height for the harness (A, B or C) and pass the protective plates for the shoulder straps through the corresponding slits.

Step : 55/71

Thread the shoulder straps back through the two chest pads, then through the corresponding slits towards the back of the car seat. Hook the shoulder straps back onto the catch plate • For easier access to the top slits in the back of the car seat, put the car seat in the upright position • For easier access to the bottom slits in the back of the car seat, put the car seat in the reclining position

29 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 56/71

8 - Before replacing the wallet, tighten the shoulder straps by pulling firmly on the adjustment strap. Then replace the instructions wallet, concealing the catch plate behind it (wallet fold at the top).

Step : 57/71

IMPORTANT: always have the wallet in place, even if the instructions are not inside it. If it is not in place, this could cause problems. Before using the seat again, check that the harness is working properly.

30 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 58/71

ADJUSTING THE SEATING POSITION • To bring the sides closer together turn the knob to the left. • To move the sides wider apart turn the knob to the right

Step : 59/71

ADJUSTING THE SEATING POSITION • Turn the knob to the right to return the seat to the upright position. • Turn the knob to the left to recline the seat.

31 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 60/71

REMOVING THE SEAT COVER Before dismantling, note carefully where all the various parts are on the child seat so that everything can be reassembled properly. 1 - Loosen the shoulder straps and release the harness buckle, and then put the seat in the reclined position.

Step : 61/71

2 - Pass the catch plates for the harness waist straps through the seat shell (on the right and on the left under the seat of the car seat).

32 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 62/71

3 - Unfasten the harness

Step : 63/71

4 - Unfasten the harness buckle and pass the catch plate through the seat of the car seat.

33 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 64/71

5 - To remove the cover: loosen the cover at A and B.

Step : 65/71 Care Fabric: • Before cleaning check the label sewn into the fabric, you will find the wash symbols indicating the method of washing each item. Washing symbols: Machine wash 30 ° Hand wash only Do not use bleach (Chlorine) Do not tumble dry Do not iron Do not dry clean

34 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 66/71

ACCESSORIES Foam seat cover

Step : 67/71

ACCESSORIES Sun canopy

35 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com

Step : 68/71

ACCESSORIES Heat protection seat cover

Step : 69/71 GUARANTEE CERTIFICATE Dear Customer, Thank you for the confidence you have shown in us by choosing one of our products. We hope it will meet all your expectations. This certificate indicates that this product has been manufactured according to the applicable quality standards and that it has been subjected to numerous checks during the various manufacturing stages. If in spite of all our efforts a fault should arise during the validity of this certificate, we undertake to respect the provisions of this guarantee. GUARANTEE CERTIFICATE: Bébé Confort guarantees that this product complies with safety requirements as defined by applicable regulations, and that it has no design or manufacturing faults when purchased by the retailer. If within 24 months of purchase by you this product should reveal any fault, subject to normal use as defined in the instructions for use, Bébé Confort undertakes to repair it for you or to replace it, subject to the following exclusions: . use and purpose other than those indicated in the instructions for use, . installation not in accordance with the instructions, . repair carried out by an unapproved person or retailer, . proof of purchase not presented, . product not maintained, . replacement of any parts subject to wear (wheels, areas which rub, etc.) during normal use. From when? From the date the product is purchased. For how long? For 24 consecutive months, non-transferable; only the first purchaser benefits from this. What do you have to do? After you purchase your product, keepthe sales receipt showing the date of purchase. If a problem should arise, the product must be taken back to the retailer from whom it was bought. Any product sent directly to the manufacturer will not be covered by the guarantee.

36 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com This guarantee conforms with European Directive No. 1999/44/EC dated 25 May 1999.

Step : 70/71 DOREL FRANCE S.A. Z.I. - 9 bd du Poitou BP 905 49309 Cholet Cedex FRANCE DOREL BELGIUM BITM Brussels International Trade Mart Atomiumsquare 1, BP 177 1020 Brussels BELGIQUE / BELGIE DOREL (U.K). LTD Hertsmere House, Shenley Road, Borehamwood Hertfordshire WD6 1TE UNITED KINGDOM DOREL GERMANY Augustinusstraße 9 c D-50226 Frechen-Königsdorf DEUTSCHLAND DOREL NETHERLANDS Postbus 6071 5700 ET HELMOND NEDERLAND DOREL ITALIA S.P.A. a Socio Unico Via Verdi, 14 24060 Telgate (Bergamo) ITALIA DOREL HISPANIA, S.A. C/Pare Rodés n°26 Torre A 4° Edificio Del Llac Center 08208 Sabadell (Barcelona) ESPAÑA DOREL PORTUGAL Artigos para Bebé, Lda. Rua Pedro Dias, 25 4480-614 Rio Mau Vila do Conde PORTUGAL DOREL JUVENILE SWITZERLAND S.A. Chemin de la Colice 4 1023 CRISSIER SWITZERLAND / SUISSE DOREL POLSKA Ul. Legnicka 84/86 37 / 38

Use the car seat ISEOS ISOFIX

Made with Peoplbrain - www.peoplbrain.com 41-503 CHORZOW POLAND

Step : 71/71

38 / 38

Powered by TCPDF (www.tcpdf.org)