Table of contents Chapter1. USB to RS232 Module......................................................................... 1 Chapter2. Contact Us...........................................................................................11
Chapter1. USB to RS232 Module Product Introduce Product Number
DB-UC001-A & DB-UC001-B
Product Name
USB to RS232 Module
Description
Connected Mode: USB to DB9 Female, USB to DB9 Male Power Supply: 3.3V CMOS Level, 5V CMOS Level*
Temperature Range:
–40 to +85 °C
Item Net Weight
110g/3.9oz
Size
2.2inch*2.2inch(55.88mm*55.88mm)
Accessories
Mini usb cable
Package
ESD Protection
* When using DB-UC001-A separately, if the device connected to DB-UC001-A can provide 5VDC power from mini USB port, it can work well. If not, it will not work. You should supply 5VDC from connectors to DB- UC001-A. If the device can supply 5VDC for DB-UC001-A, please don’t supply 5VDC in addition. USB to RS232 Module are manufactured by Sure Electronics. It uses the CP2102 that is recommended for all new designs, and is a pin-compatible upgrade to the CP2101. The CP2102 is a highly-integrated USB-to-UART Bridge Controller providing a simple solution for updating RS-232 designs to USB using a minimum of components and PCB space. The CP2102 includes a USB 2.0 full-speed function controller, USB transceiver, oscillator, EEPROM, and asynchronous serial data bus (UART) with full modem control signals in a compact 5 x 5 mm QFN-28 package. No other external USB components are required. Notice: Never feed +5V power to DB-UC001-B, when combined with DB-UC001-A Never use J2 and J4 to connect in the meantime
DB-UC001-B CP2102 USB to Bridge Single-chip Driver Installation Guide Double click CP210x_VCP_Win2K_XP_S2K3.exe file. The following window is appearing.
Figure 2 You are advised to read the terms of the license agreement as shown in figure 2 carefully before proceeding with the installation. If you decline the license terms, the installation cannot proceed.
Figure 3 Unless there is a specific need to change the installation path --- for instance, you want to install CP2102 driver on a different drive, we recommend that the default setting is used. Once you have the correct path, click to proceed.
Figure 5 You need to enable the “Launch the CP210x VCP Driver Installer” option.
Figure 6
Click to begin the installation. Please wait while system is scanned. When installation is done, you maybe should restart computer to effect this driver.
