N O

TI LU

O S E

80 10

19

20

x

FU

R

LL

H

D

12/24/240V FULL HD LED TV/DVD/USB Combo

042702 (32")

Instruction Manual

Contents Important Safety Instructions What’s in the Box TV Controls TV Inputs and Outputs

2 3 4

SYSTEM CONNECTIONS AV Input PC Input HDMI Input YPbPr Component Input COAXIAL Output USB Input Antenna Connection

5 5 6 6 7 7 8

Installing Batteries in the remote Control Remote Control

8 9-11

OSD MENU OPERATION Source Selection Main Menus Channel Menu Picture Menu Sound Menu Time Menu Option Menu Lock Menu Hotel Mode EPG - Eletronc Program Guide PVR - Personal Video Recorder

12 12 13 14 15 16 17 18 19 20 21

MEDIA OPERATION Photo Viewer Music Playback Video Playback Text Viewer

22 23 23 23

USB Multimedia Playback Formats Built-in DVD Player Operation Cleaning and Maintenance Troubleshooting Specifications

24 25-30 31 32-33 34

Important Safety Instructions reference, along with the warranty card, purchase receipt and carton. The safety correctly adhered to.

Important Safety Instructions (cont) Usage conditions and restrictions • Follow the instructions in this manual when installing and adjusting the TV set. Only adjust those controls that are covered in this instruction manual; improper adjustment of other controls may result in damage. If this happens, unplug the TV and have it serviced by appropriately qualified personnel. • Do not change or modify the TV set in any way. Only use the attachments/ accessories specified. • Do not cover the ventilation openings with items such as newspapers, tablecloths, curtains etc., as this could impede ventilation. • Do not insert any objects of any kind into this unit through the ventilation slots or DVD slot, as they could touch the current-carrying parts or short-circuit parts, resulting in fire, electric shock or damage to the unit. • Do not touch the screen with fingers, as this may scratch or smudge the TV screen.

• Before installing this TV set, make sure your outlet voltage corresponds to the voltage stated on the appliance rating label of the power adaptor being used.. • Only use this TV with the power adaptors supplied. If either plug does not fit into your outlets, consult your dealer or an RV service center for • Do not overload the power outlet. • CAUTION the power supply cord, plug and antenna cable to rain or moisture; do not use it anywhere near water; do not touch the power plug with wet hands. • Do not let the cord hang over the edge of a table or counter, or touch hot surfaces. • Do not allow anything to rest on or roll over the power cord and antenna cable. Protect the cord and run all cables so that no one steps on or trips over them. • Do not run the cord near heat-producing appliances such as radiators, stoves or irons. The excessive heat could melt the insulation and expose live wires. • When not in use, disconnect the power cord from the outlet. Hold the plug, not the cord, when disconnecting the unit. Pulling the cord can damage the internal wires and may cause a fire. • Never touch the TV screen, antenna or cord during thunderstorms. Stop use during thunderstorms; unplug the unit when a thunderstorm is approaching.

• Do not expose the batteries to excessive heat such as sunshine, fire or the like. • Unplug the TV set in all of the following circumstances: • If it has been subject to impact or has been dropped and is damaged. • If its voltage adaptor plugs, or the wall socket, are damaged. • The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. • Young children should be supervised to ensure they do not play with the TV. Position • If a television is not positioned in a sufficiently stable location, when stand mounted, it can potentially be hazardous if it falls. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets, shelves or stands that provide a sturdy support for the TV and are not in areas where the TV can be accidently knocked or bumped . • Only using furniture that can safely support the television. • Ensuring the TV is not overhanging the edge of the supporting furniture. • Not placing the TV on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the TV to a suitable support. • Not standing the TV on cloth or other materials placed between the TV and supporting furniture. • Educating children about the dangers of climbing up to reach the TV controls.

Remote Control 32" TV with inbuilt DVD Player

H LU SO

LL

RE

80 10

19

20

x

FU

TIO

D

• When deciding where to put the TV set, make sure the location is: • Well ventilated. Leave at least a 20cm space all around the TV set for good ventilation. • Protected from overheating and away from direct sunlight. • Away from damp and cold. • Away from areas with extremes of temperature (below 0°C or exceeding 40°C) or moisture. • Away from moisture drips or splashes. • Protected from excessive dust. • Do not install this equipment in a confined space such as a bookcase or similar. • Do not put any objects filled with liquids, such as vases, on top of the TV set. • Do not place any naked flame sources, such as lighted candles, on top of the TV.

What’s in the Box

N

Important Safety Instructions (cont)

042702 (32") 042702 (32")

Instruction Manual

Manual

BB4*12 4PCS

BM4*10 4PCS

1

2

TV Controls

TV Inputs & Outputs Rear Bottom L

R

Y

Pb

Pr

VIDEO

L

R

HDMI 3

DC 12V/24V

VOL+

1

VOL-

2

3

4

5

CH+ CHMENU SOURCE POWER

Rear Side VOL+

VOL-

CH+

CH-

MENU

SOURCE POWER

Controls on the TV 1. 2. 3. 4. 5. 6. 7. 8. 9.

After you load a disc, press to play the disc, and press twice to pause. Press the button when the power is on the disc will eject, Press the button again to load the disc automatically. VOL(+) - This button increases the TV’s volume. If the OSD menu is active, pressing this button will move the selection to the right. VOL(-) - This button decreases the TV’s volume. If the On Screen Display(OSD) menu is active, pressing this button will move the selection to the left. CH(+) - This button performs the channel up function. If the OSD menu is active, this button functions as up control for the menu. CH(-) - This button performs the channel down function. If the OSD menu is active, this button functions as down control for the menu. MENU - This button activates the OSD menu. If a sub-menu is active, pressing this button will return the selection to the previous menu level. SOURCE - This button switches between all the different sources of the TV. When the OSD is active, this button acts as the enter button and confirms the menu selection. POWER - Turn on the TV by pressing the button once. Press the button again to turn off the TV.

200

3

100

HDMI 2

HDMI 1

VGA

PC AUDIO IN

6

7

8

9

RF IN

USB

10

11

COAXIAL OUT

12

EARPHONE OUT

13

1. POWER(DC12V/24V) input 2. L/R AUDIO output: Audio RCA outputs for external amplifiers & devices. 3. Y/Pb/Pr Input: Component Video in. 4. AV 1 Input: Composite Video & Audio (A/V) in. 5. HDMI3 Input: HDMI in. 6. HDMI2 Input: HDMI in. 7. HDMI1 Input: HDMI in. 8. VGA Input: Connect to a computer VGA output jack. 9. PC Audio Input: Connect to the audio output jack on a computer. 10. RF Input: Connect to an external antenna to receive ATV/DTV TV signals in ATV/DTV mode. 11. USB: USB input. 12. COAXIAL: Co-axial Digital audio output. 13. Headphone: Headphone/audio output. Use this output to connect to RV Media Head Unit’s TV Input.

4

System Connection

NOTE: Please make sure the inputs and outputs have firm connections before connecting power.

3. HDMI INPUT HDMI input: Use the SOURCE button to select HDMI 1, 2 or 3. HDMI 2

eg. Blu-ray, DVD, STB, Camcorder etc

HDMI 1

1. COMPOSITE A/V INPUT Audio/video input: Use the SOURCE button to select AV.

HDMI 2

Systems Connection

OR HDMI 1

VGA

VGA

PC AUDIO IN

HDMI 1

PC AUDIO IN

RF IN

RF IN

USB

Video Cable (Not supplied)

USB

COAXIAL OUT

Y

Pb

Pr

VIDEO

L

R

HDMI 3

L

R

Y

Pb

Pr

VIDEO

L

EARPHONE OUT

R

COAXIAL OUT

EARPHONE OUT

L DC 12V/24V

HDMI 3

R

DC 12V/24V

2. PC INPUT PC input: Use the SOURCE button to select PC.

4. YPbPr COMPONENT INPUT Video component input: Use the SOURCE button to select YPbPr. HDMI 2

HDMI 2

HDMI 1

HDMI 1

VGA OUTPUT VGA OUTPUT

Pb

VGA

VGA

Pr

PC AUDIO IN

PC AUDIO IN

PC AUDIO OUTPUT

Y

RF IN

RF IN

USB

USB

COAXIAL OUT

COAXIAL OUT

R

Y

Pb

Pr

VIDEO

L

R

EARPHONE OUT

EARPHONE OUT

L DC 12V/24V

HDMI 3

L

R

Y

Pb

DC 12V/24V

5

6

Pr

VIDEO

L

R

HDMI 3

System Connection

5. COAXIAL OUTPUT Allows connection of Digital audio systems and Surround Sound

7. Antenna connection HDMI 2

System Connection

Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be . connected to the antenna jack directly

HDMI 1

Antenna lead with 75 ohm male PAL Connector

VGA PC AUDIO IN

COAXIAL

75ohm coaxial cable Antenna cable

RF IN

USB COAXIAL OUT

COAXIAL Cable (Not supplied)

EARPHONE OUT

L

R

Y

Pb

Pr

VIDEO

L

R

Remote Control Installing Batteries

HDMI 3

DC 12V/24V

1

Open the battery compartment cover on the back of the remote. Battery

6. USB INPUT Use the SOURCE button to select Media.

Cover

HDMI 2

2

To use the remote control, point it towards the remote sensor at the front of the television. The remote control has a range of up to approximately seven meters from the TV at an angle of up to 60 degrees.

HDMI 1

Insert two 1.5V AAA size batteries using the correct polarity as shown. .Don’t mix old or used batteries with .new ones.

2 x size AAA 1.5V

VGA

3

Replace the cover.

PC AUDIO IN RF IN

USB memory

Battery Cover

USB COAXIAL OUT EARPHONE OUT

L

R

Y

Pb

Pr

VIDEO

L

R

- Batteries should not be exposed to excessive heat such as direct sunlight, fire or the like. - If not being used for a period of time, please remove the batteries from the remote in case of leakage. - Do not mix old & new batteries together.

HDMI 3

DC 12V/24V

7

8

Remote-Control Unit POWER

MUTE

2

1

3

4

SLEEP

6

P.MODE

9

DISPLAY

AUTO

SOURCE

Button

1

POWER

2

MUTE

3

0‐9

4

SLEEP

11

MENU

EXIT QT

I/II

15

S.MODE

Select the sound mode.

AUTO DISPLAY

Use for adjustments in PC mode. Press to display the source and channel info.

SOURCE

Press to select signal the source for the TV. Allows you to navigate the on screen menus (OSD). Exit from the current menu or sub‐menu. Allows you to navigate the on‐screen menus and adjust the system settings to your preference.

13 14

14 15 16 17 18

OK CH+/‐ VOL+/‐ QT AUDIO

19

I/II

20

ASPECT

MENU EXIT

21

ASPECT D.MENU SETUP

21/25 22/26 29 30 33 34 37 38/45 41 42/48

FAV

EPG

D.DISP

TIME SHIFT REC.MENU

SUBTITLE REVEAL

TEXT

INDEX TV/RADIO CANCEL

REC

MIX

A-B SIZE

HOLD

REPEAT

9

SUBPAGE

18/19 20 23/27 32 31 36 35 40/47 39/46 44/50 43/49

24/28

Set the delay time for the TV to turn off automatically.

7 8 10 11 12

16

Press 0‐9 to select a TV channel directly. The cannel will change after 2 seconds.

Select the picture mode.

8 7 10

AUDIO

Press to mute the sound. Press again to regain sound.

P.MODE

9

12 17

Turns the TV on or off to standby mode.

6

13

OK

Description

Return to the previously viewed program.

5

5 S.MODE

No.

Select the option. Press these two buttons to change channels up/down. Press these two buttons to increase/decrease the volume. Quick Tune. Quick TV Channel Autotune Button. Press to change the DTV or DVD audio language. Select NICAM audio mode. Only be available for TV programmers with NICAM transmission, and default mode is mono. Press this button to select the aspect ratio of the screen. Eject/insert disc. Quick Teletext navigation or setup settings / DVD: Video DVD Menu button. DVD system setup.

22

D.MENU

23

SETUP

24

D.DISP

25

R (DELETE)

26

G (RENAME)

27

Y (MOVE)

Move function button.

28 29 30 31 32 33 34 35 36 37 38

B (SKIP) FAV EPG TIME SHIFT REC.MENU SUBTITLE REVEAL TEXT REC/ INDEX TV/RADIO

Skip function button. Selects favorite channel(s). Press to display EPG (Electronic Program Guide). Press to switch to TIME SHIFT mode. Press to switch to REC.MENU immediately (DTV only). Press to select the subtitle language. Shows hidden words or pages by Teletext. Switch on/off of Teletext window. Press to record the program immediately. Returns to Index page by Teletext. Press to switch between DTV and radio programs

Quick navigation during Teletext or setup settings / DVD: DVD Information button. Delete function button. Rename function button.

10

No. 39

Button

Description

CANCEL

Switches the Teletext window to the background; only the current page no is visible.

40

MIX

41 42

REPEAT

43

HOLD SUBPAGE

44

SIZE

OSD Menu Operation Source Selection

Sets the transparency of Teletext window.

Press SOURCE button to display the input source list. Press the ▼/▲ buttons to select the input source you want to watch, Press the OK button to enter the input source.

DVD: Repeat mode selection. Zoom In or Out of the Teletext window. Holds on the current Teletext page. Displays a sup‐page of upper Teletext options.

45

Play and Pause Media‐Player / DVD.

46

Fast Rewind Media‐Player and DVD.

47 48

Fast Forward Media‐Player and DVD. Stops playback Media‐Player and DVD.

49

Plays the previous Media Player or DVD file/chapter.

50

Plays the next Media Player or DVD file/chapter..

Main Menus Press the MENU button to display the main menu. Press ◄ / ► to select from the following: Channel, Picture, Sound, Time, Option and Lock sub menus. Press OK to select a specific submenu. In the submenu, press ▼/▲ to select the next menu item.

11

12

OSD Menu Operation

OSD Menu Operation

Channel Menu (when DTV is selected as the source)

Picture Menu

50 50 50 50 50

Auto Tuning Press the ▼/▲ buttons to select Auto Tuning. After pressing the OK button, the auto tuning interface will be displayed. Auto Tuning can also be activated by pressing the “QT” button on the remote control while in DTV mode. NOTE: If power has been disconnected from the TV, you may be required to select “Australia” from the list of countries first before starting the Auto tune process. DVB-T Manual Tuning Press ▼/▲ buttons to select Manual Tuning and press OK button to show manual tuning list. Using the ▼/▲ buttons, you can select the channel number or you can also use the number keys to select a channel number, and then press OK button to start searching for the channel. Programme Edit Press ▼/▲ buttons to select Programme Edit, and then press the OK button to enter the editing interface. By using the ▼/▲ buttons, you can select the channel number and start editing according to the relevant selection. LCN Sorting Select LCN Sorting with▼/▲ buttons, and then press OK button. If LCN sorting is turned on, DTV channels will be sorted by their Logical Sorting Number. Software Update(USB) Use this selection if a software update becomes available to update the TV’s operation.

13

Picture Mode Press ▼/▲ buttons to select Picture mode, and go into next interface by pressing the OK button. Then you can change picture mode to standard/mild/dynamic/personal using the ▼/▲ buttons. Note that you can only adjust the Contrast, Brightness, Colour, Sharpness & Tint settings when Personal is selected. Colour Temp Press ▼/▲ to select the Colour Temp menu item, and then the OK button to take you to next menu where you can change Colour Temperature. Modes available are standard, warm, cool and personal. You can alter colour temperature with the ▼/▲ buttons. Noise Reduction Press ▼/▲ to select the Noise Reduction menu option, and then the OK button to take you to next menu. Then press the ▼/▲ buttons to select off/low/middle/high. Other menu items In the picture menu, other menu items can be adjusted in the same way. First, press ▼/▲ to select the menu item. After pressing the OK button, you are able to change the setting with the ▼/▲ buttons.

14

OSD Menu Operation

OSD Menu Operation

SOUND MENU

TIME MENU

Sound Mode Press the ▼/▲ buttons to select Sound Mode. Then press the OK button to select from a list of sound modes. The sound mode can be switched between standard/music/movie/sports/ personal using ◄ / ► buttons. EQ Settings Equaliser (bass & treble) settings can only adjusted when the Sound Mode selection (above) is set to “Personal”. Once this is set, Press ▼/▲ buttons to select the frequency you would like to adjust: 120Hz 500Hz 5KHz 10KHz

Bass Midbass Midrange Treble

Then use ◄ / ► buttons to increase or decrease the setting. Auto Volume (AVL) This function when turned on will help even out the volume level between different A/V sources so one is not greatly louder than another. It can also help reduce the volume of loud TV ads compared to TV shows. The result depends greatly on the A/V source so this function is set default to off. To turn AVL on, press ▼/▲ buttons to select Auto Volume and then press OK. Press ◄ / ► buttons to turn AVL on/off. Surround Sound Press ▼/▲ to select Surround Sound and then press OK button to go into the Sub menu. With the◄ / ► buttons, surround sound can be switched between SRS TS XT/surround/ off depending on the program source. Other Menu Items The rest of menu item can be altered by the same way. Press▼/▲ button to select the above menu items and go into next interface with OK button. Then, press ◄ / ► buttons to adjust.

15

Clock The clock and date is automatically programmed from information received from Digital TV Channels. You should not need to use this sub-menu. Off Time Select Off Time with ▼/▲ buttons and press the OK button to enter the sub menu. In this menu, you can select a specific time to turn the TV off. On Time Select On Time with ▼/▲ buttons and press the OK button to enter the sub menu. You can first set the date of on time. Then the hour, minute, channel and volume can be altered to a specific time. Sleep Timer Select Sleep Timer with ▼/▲ buttons and press the OK button. Then with ◄ / ► buttons, the sleep timer can be set to OFF/10/20/30/60/90/120/180/240 minutes. Auto sleep Select Auto sleep with ▼/▲ button and press OK button. Then with ◄ / ► buttons, select 3,4 or 5 hours. The TV will turn off if there is no activity for this period of time.

16

OSD Menu Operation

OSD Menu Operation

OPTION MENU

LOCK MENU

OSD Language Press the ▼/▲ buttons to select OSD Language sub menu and select language with▼/▲ or ◄ / ► buttons. Press the OK button to confirm then the menu button to return to the previous menu. Audio Languages Press ▼/▲ to select Audio Language and select language with▼/▲ or ◄ / ► buttons. Press the OK button to confirm then the menu button to return to the previous menu. Subtitle Languages Press ▼/▲ to select Subtitle Language and select language with▼/▲ or ◄ / ► buttons. Press the OK button to confirm then the menu button to return to the previous menu. Hearing Impaired Select Hearing Impaired (where supported) with ▼/▲ buttons and then press the OK button. PVR File System To check the status of the USB drive, format a drive or change the maximum record/time shift setting, select PVR File System with ▼/▲ buttons and then press the OK button enter。 Reset To return the TV to the Factory Default settings, select Reset with ▼/▲ buttons and then press the OK button. Blue Screen To have a Blue Screen rather than Black when no input signal is available, select Blue Screen with ▼/▲ buttons and then press OK button to select on/off then the menu button to return to the previous menu. OSD Timer Select OSD Timer (on screen menu display time) with the ▼/▲ buttons and then press OK button. Press the ◄ /bu tton toons to choose the specific time then the menu button to return to the previous menu.

17

Lock System Select System Lock with the ▼/▲ buttons and then enter the password (default is “0000") to then access the Block Program or Parental Guidance menus. SET Password Select Set Password with▼/▲ buttons. Then press OK button to input the old password (default is “0000” and then set a new password. Block Program (DTV TV only, DTV must be selected as the source) Select Block Program with ▼/▲ buttons, and press OK button. You can then add the channels you wish to block. Parental Guidance (DTV TV only, DTV must be selected as the source) Select Parental Guidance with▼/▲ button, and then press the OK button. With the ◄ / ► buttons, the parental guidance function can be turned on or off.

18

OSD Menu Operation

OSD Menu Operationn

HOTEL MODE - Useful for shop displays and volume restrictions etc.

EPG - Electronic Program Guide

Hotel Mode Hotel model allows you to select a number of features that make this TV also useful for shop displays, promotions or where you are after simple operation from one source. Select Hotel Lock with the ▼/▲ buttons and then enter the password (default is “0000") then use the ◄ / ► buttons to turn this feature ON or OFF.

Press the EPG button on the Remote control to access the Electronic Program Guide (DTV only)

Key Lock Select Set Password with▼/▲ buttons. Then press OK button to input the old password (default is “0000” and then set a new password. Source Setting Select Block Program with ▼/▲ buttons, and press OK button. You can then add the channels you wish to block. Default Source Select Parental Guidance with▼/▲ button, and then press the OK button. With ◄ / ► button, the parental guidance can be open or closed. Default Prog Select Set Password with▼/▲ buttons. Then press OK button to input the old password (default is “0000” and then set a new password.

Record Press the RED button on the remote control to enter the Recording sub-menu. You can the channel, start and end times of the program you want to record using the ◄ / ►and▼/▲ buttons. Info Press the GREEN button on the remote to display detailed information about the program. Schedule Press the YELLOW button on the remote to display the Schedule List to display the programmes you have scheduled to record or be reminded of. Remind Press the BLUE button on the remote control to set a reminder for a program you would like to watch at a later date.

Max Volume Select Block Program with ▼/▲ buttons, and press OK button. You can then add the channels you wish to block. Default Volume Select Parental Guidance with▼/▲ button, and then press the OK button. With ◄ / ► button, the parental guidance can be open or closed.

19

20

OSD Menu Operation

Media Operation

PVR - Personal Video Recorder Functions

Press the “MEDIA” button on the remote control to access this menu. You can also access this menu by selecting “MEDIA” as a Source on the remote Control Press the ◄ / ► buttons to select Photo/Music/Movie/Text , and then press ENTER button to select the appropriate selection. NOTE: A USB device must be plugged in to use these functions.

RECORD Live TV (DTV Only) If you are watching DTV, you can press the • Record button on the remote. The TV will display the recording control menu. Stop Recording Press the button to stop recording. The TV will display a confirmation message to stop recording. Press ◄ on the remote to confirm. When the storage space of the USB drive is full, the TV will display a warning message then stop recording and return to normal broadcast Television. Time Shift/Pause Live TV While watching DTV, press the “TIME SHIFT” button on the remote control to Pause Live TV plus bring up the time shift control menu. The time shift control menu is similar to the Record menu and you can perform various functions such as exit time shift, or fast forward to catch up to the live program etc. Pressing the “TIME SHIFT” button again will continue the live program from where you paused it (time shift). Important: To display the Time Shift menu when the TV is either paused or on Time Shift playback, press the “OK” button on the remote control.

PHOTO VIEWER

1. Select PHOTO with the ◄ / ► buttons, and then press the OK button to enter sub_menu. 2. Select C:\, then press the OK button to select the USB drive. 3. Select the specific photo, and press button to view, press the button to view the previous image, press the button to view the next image. A menu with further options will also be displayed where you an use the arrow key to make further selections. 4. Press the Exit button to exit.

21

22

Media Operation (cont’d)

USB Multimedia Playback Formats

MUSIC PLAYBACK 1. Select MUSIC with the ◄ / ► buttons, and then press the OK button to enter sub_menu. 2. Select C:\, then press the OK button to select the USB drive. 3. Using the arrow keys, select a specific song, and press the button to play, press the button to play the previous song, press the button to play the next song. Selecting particular songs with the “OK” button will form a playlist of songs you want to play. Not doing this will mean that all of the songs are played in order after your first selection. 4. Press the RED button to delete a selected song/track. 5. Press the Exit button to exit.

VIDEO PLAYBACK 1. Select VIDEO with the ◄ / ► buttons, and then press the OK button to enter sub_menu. 2. Select C:\, then press the OK button to select the USB drive. 3. Highlight the specific video. When highlighted, the file information will be displayed and a preview of the video will start playing in the middle of the screen. Press the “OK” button to start playback. A player menu will be displayed where you can select options such as repeating videos etc. Select to play the previous title, select to play the next title. 4. Press the RED button to delete the selected video title. 5. Press the Exit button to exit.

TEXT VIEWER 1. Select TEXT with the ◄ / ► buttons, and then press the OK button to enter sub_menu. 2. Select C:\, then press the OK button to select the USB drive. 3. Select the specific file, and press the button to play, press the button to play the previous file, press the button to play the next file. 4. Press the RED button to delete the selected file. 5. Press the Exit button to exit.

23

24

Built-in DVD Player Operation

25

Built-in DVD Player Operation (Cont.)

26

Built-in DVD Player Operation (Cont.)

Built-in DVD Player Operation (Cont.)

INITIAL SETTINGS (DVD) - - Preference Page - -

- - General Setup Page - -

TV Type

NTSC

Audio

Eng

TV Display

Wide

Subtitle

Eng

OSD Lang

Eng

Disc Menu

Eng

Captions

Off

Parental

Last Memory

Off

Password Default Go To Preference Page

1. TV DISPLAY: Set the screen ratio options are: Normal/PS (4:3 Pan Scan), Normal/PS (4:3 Letter Box) and Wide (16:9). The default settings is wide.

1. TV Type: The DVD player supports output of various systems including Multi, NTSC, PAL. The default setting is PAL and this should not need to be changed.

2. OSD Lang: Set the OSD Language options.

2. Audio: DVD language selection options.

3. Subtitle: This player can display DVD 3. CAPTION: Play captions on supported subtitle languages if supported by the DVD DVD titles, Options: ON/OFF. disc. When playing DVD’s, you can hide the subtitle or choose any of them as the current 4. LAST MEMORY: Play DVD from last subtitle language. point. Options are: ON/OFF. 4. Disc menu: DVD Disc menu language selection options. - - General Setup Page - Downmix

STR

Go To Speaker Setup Page

1. LT/RT: Logic Surround stereo audio output. This matrix-based coding process enables stereo audio tracks to carry four channels (left, center, right and surround) of audio data.

5. PARENTAL This function disables playback of specific DVD’s which may be unsuitable for children. Some DVDs are encoded with specific rating levels. lf the rating level of the disc is higher than that preset in this menu, playback of the disc will be prohibited. After selecting one of the PARENTAL codes, the screen will display the PASSWORD page. The default password is “8888". 6. PASSWORD [DVD only]: Allows you to change the current PASSWORD. 7. Default: This option will return the DVD to it’s factory default settings.

2. Stereo: Analog stereo audio output. The player sends the subwoofer and speech signals to the Tv’s speakers.

27

28

Built-in DVD Player Operation (Cont.)

Built-in DVD Player Operation (Cont.)

Title Search [DVD] Press [GOTO], then press the number buttons to enter the desired title number.

Subtitle language [DVD] If the DVD you are watching has subtitles, press [SUBTITLE] repeatedly during playback until the desired subtitle language appears on the TV screen. Example: SUBTITLE 01/03 ENG

Repeat Playback Press [REPEAT] during playback to activate repeat mode:

NOTE: Not all discs support this function.

Chapter Title

Audio soundtrack language (multilanguage) [DVD] This function works only with discs that have multiple audio soundtrack languages recorded. Press [AUDIO] repeatedly during playback until the desired language appears on the TV screen.

All O?

NOTES:  When the desired language is not selected, even though the button is pressed, the language is not available on the disc.  If the language is not recorded on the disc, only the available language on the disc will be heard.  When you turn off the power or change the disc, you have to select the language again. l

On-screen information Press [DISPLAY] repeatedly to show the disc information available (Title, Chapter, Title elapsed playing time, Language, etc.).

l l

Picture/JPEG CD playback To start a slide from the thumbnail pictures: / / show / 1. Press to select the desired picture. To go to the next or previous thumbnail pictures, press or . 2. Press [OK] or / (Play) to start the slide show from the selected picture. During the slide show:  PRESS to pause. Press (Play) to continue. / / /  PRESS or to skip to the next or previous file.

29

30

Cleaning and Maintenance

Troubleshooting

WARNING! For your personal safety, be sure to disconnect the power adaptor before proceeding with any maintenance or cleaning. Cleaning the TV screen • Do not touch the TV screen with sharp objects. • Use a clean, soft cloth to wipe off any dust and fingerprints from the TV screen surface. Wipe in a straight motion from the center of the TV panel to the outside. • Do not clean the screen with water or chemical cleaners, as this may damage the TV screen surface. • Never use chemicals such as household cleaning sprays, antistatic sprays or fluids, benzene or thinner to clean the TV screen. Cleaning the main unit • Dust the TV set by wiping the screen and cabinet with a soft, clean cloth. • If necessary, wipe the outside of the unit with a clean, soft cloth, moistened with lukewarm water. • Do not use benzene, thinner or alcohol as these chemicals will smudge the surface finish. Maintenance • Do not dismantle this product by yourself, as this may cause damage. There are no user-serviceable parts contained in the TV set. • If your TV set has been damaged, contact the after sales support line for advice or take it to a local service center for inspection or repair. No liability can be accepted for any damage caused by non-compliance with these instructions or any other improper use or mishandling of appliance. • This product should not be adjusted or repaired by anyone except properly qualified personnel.

31

32

Troubleshooting (Cont.)

Specifications 042702 32" (80cm) LED

 3

xRCA / 1x3.5mm

732x441x71MM 732x484x174MM 6.1kg DC12V/24V 35

33

34

6A

*As RV Media continually strives to improve its products, Specifications may be subject to change without notice.

Warranty Please complete your warranty card included with this TV. This product is backed up with a 2-Year Warranty. Warranty Help line: 1300 654 936

V1.0

35

36