Pneumatic Products LOAD-TAMER™
Catalog 0675/USA
Catalog 0675/USA
! WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application including consequences of any failure, and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.
Offer of Sale The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document entitled “Offer of Sale”. © Copyright 2004, Parker Hannifin Corporation. All Rights Reserved.
Pneumatic
Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/automation/transportation
Catalog 0675/USA
Table of Contents
LOAD-TAMER™ Air Control Module
Functional Diagrams ......................................................................................... 2-3 General Specifications ......................................................................................... 5 Common Part Numbers..................................................................................... 6-8 Model Number Index ............................................................................................ 9 Technical Data .................................................................................................... 10 Dimensions......................................................................................................... 11 Offer of Sale ....................................................................................................... 12
1
Pneumatic
Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/automation/transportation
Catalog 0675/USA
LOAD-TAMER™ Air Control Module Electrical Switch, Toggle Valve
(Revised 3/20/06)
Functional Diagrams Electrical Switch and Low Temperature Electrical Switch Electrical Switch (Raise)
Electrical Switch and Low Temperature Electrical Switch Electrical Switch (Lower) Down
Up
Outlet #4
Outlet #4 Exh
Exh
Supply
Supply Electrical Switch Down
Outlet #2
Electrical Switch Up
Outlet #2
Outlet #4
Outlet #4 Exh
Exh
Supply
Supply
Outlet #2
Outlet #2
Operation
Operation
The operator controls the outlet pressure by using the regulator and the electrical switch valve. System pressure, indicated in the illuminated gauge, is set by the pressure regulator. Pressure is increased by turning the knob in a clockwise direction; turning the knob in the opposite direction reduces it. When the switch is moved to the DOWN position, pressurized air is supplied to the regulator. Both the electrical switch valve and the regulator have exhaust ports, so that moving the switch to the UP position causes the system air to be exhausted through both devices.
The operator controls the outlet pressure by using the regulator and the electrical switch valve. System pressure, indicated in the illuminated gauge, is set by the pressure regulator. Pressure is increased by turning the knob in a clockwise direction; turning the knob in the opposite direction reduces it. When the switch is moved to the UP position, pressurized air is supplied to the regulator. Both the electrical switch valve and the regulator have exhaust ports, so that moving the switch to the DOWN position causes the system air to be exhausted through both devices.
Toggle Valve (Raise)
Toggle Valve (Lower)
Toggle Up
Toggle Down
Outlet #4
Outlet #4
Exh
Exh
Supply Outlet #2
Supply Outlet #2
Toggle Down
Toggle Up
Outlet #4 Exh
Outlet #4 Exh
Supply
Outlet #2
Supply
Outlet #2
Operation
Operation
The operator controls the outlet pressure by using the regulator and the toggle valve. System pressure, indicated in the illuminated gauge, is set by the pressure regulator. Pressure is increased by turning the knob in a clockwise direction; turning the knob in the opposite direction reduces it. When the toggle is moved to the DOWN position, pressurized air is supplied to the regulator. Both the toggle valve and the regulator have exhaust ports, so that moving the toggle to the UP position causes the system air to be exhausted through both devices.
The operator controls the outlet pressure by using the regulator and the toggle valve. System pressure, indicated in the illuminated gauge, is set by the pressure regulator. Pressure is increased by turning the knob in a clockwise direction; turning the knob in the opposite direction reduces it. When the toggle is moved to the UP position, pressurized air is supplied to the regulator. Both the toggle valve and the regulator have exhaust ports, so that moving the toggle to the DOWN position causes the system air to be exhausted through both devices.
2
Pneumatic
Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/automation/transportation
LOAD-TAMER™ Air Control Module Push-Pull Valve, Remote Pilot Valve
Catalog 0675/USA
Functional Diagrams Push-Pull Valve (Raise)
Push-Pull Valve (Lower) OFF (OUT)
OFF (IN)
Lift Outlet
Lift Outlet
Exh
Exh
Supply
Supply
Ride Outlet
Ride Outlet ON (IN)
ON (OUT)
Lift Outlet Exh
Lift Outlet Exh
Supply
Ride Outlet
Supply
Ride Outlet
Operation
Operation
The operator controls the outlet pressure by using the regulator and the push-pull valve. System pressure, indicated in the illuminated gauge, is set by the pressure regulator. Pressure is increased by turning the knob in a clockwise direction; turning the knob in the opposite direction reduces it. When the push-pull is pushed in to the ON position, pressurized air is supplied to the regulator. Both the push-pull valve and the regulator have exhaust ports, so that pulling the push-pull out to the OFF position causes the system air to be exhausted through both devices.
The operator controls the outlet pressure by using the regulator and the push-pull valve. System pressure, indicated in the illuminated gauge, is set by the pressure regulator. Pressure is increased by turning the knob in a clockwise direction; turning the knob in the opposite direction reduces it. When the push-pull is pulled out to the ON position, pressurized air is supplied to the regulator. Both the push-pull valve and the regulator have exhaust ports, so that pushing the push-pull in to the OFF position causes the system air to be exhausted through both devices.
Remote Pilot Valve (Raise)
Remote Pilot Valve (Lower) Pressurized
Pressurized
Outlet #4
Outlet #4 Exh
Exh
Supply
Supply
Outlet #2
Outlet #2
No Pressure
No Pressure
Outlet #4
Outlet #4 Exh
Exh Supply
Supply Outlet #2
Outlet #2
Operation
Operation
The operator controls the outlet pressure by using the regulator and the remote pilot valve. System pressure, indicated in the illuminated gauge, is set by the pressure regulator. Pressure is increased by turning the knob in a clockwise direction; turning the knob in the opposite direction reduces it.
The operator controls the outlet pressure by using the regulator and the remote pilot valve. System pressure, indicated in the illuminated gauge, is set by the pressure regulator. Pressure is increased by turning the knob in a clockwise direction; turning the knob in the opposite direction reduces it.
3
Pneumatic
Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/automation/transportation
Catalog 0675/USA
LOAD-TAMER™ Air Control Module
Notes
4
Pneumatic
Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/automation/transportation
Catalog 0675/USA
General Specifications
Air Control Module LOAD-TAMER™
General Specifications
Port Sizes (Excluding Preplumbed Ports) • Inlet: 1/8" and 1/4" NPTF • Outlet: 1/8" and 1/4" NPTF Operating Pressure • 0 to 160 PSIG Operating Temperature • Standard Temperature 0°F to 120°F (-18°C to 49°C)
L Bracket Mount
• Low Temperature -20°F to 120°F (-28°C to 49°C)
Flow Rating • 0.2 Cv to 1.4 Cv Gauge Scale • 160 PSI
Plastic Housing Mount
Flat Plate Mount 5
Pneumatic
Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/automation/transportation
Catalog 0675/USA
LOAD-TAMER™ Air Control Module Plastic Housing Mount
(Revised 3/20/06)
Common Part Numbers
Plastic Housing Mount
OFF (OUT)
Lift Outlet Exh Supply Ride Outlet ON (IN)
Lift Outlet Exh
Supply
Push / Pull Control Ride Outlet
Part Number
Voltage
Port Size
Temperature
Flow
LT111PA1LPA
Mechanical
1/8"
0°F to 120°F
.2 Cv
Electrical Switch Down
Outlet #4 Exh Supply Electrical Switch Up
Outlet #2
Outlet #4
Electrical Switch Control
Exh
Part Number
Voltage
Port Size
Temperature
Flow
LT111RA1RPA
12VDC
1/8"
0°F to 120°F
.75 Cv
LT111SA1RPA
24VDC
1/8"
0°F to 120°F
.75 Cv
LT111MA1RPA
12VDC
1/8"
-20°F to 120°F
.75 Cv
LT111NA1RPA
24VDC
1/8"
-20°F to 120°F
.75 Cv
Supply
Outlet #2
Pressurized
Outlet #4 Exh
Supply
Outlet #2 No Pressure
Outlet #4 Exh
External Pilot Controls
Supply Outlet #2
Part Number
Voltage
Port Size
Temperature
Flow
LT111VA1LPA
Remote Pilot
1/8"
-20°F to 120°F
.75 Cv
6
Pneumatic
Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/automation/transportation
Catalog 0675/USA
LOAD-TAMER™ Air Control Module Flat Plate Mount
(Revised 3/20/06)
Common Part Numbers
Flat Plate Mount
OFF (IN)
Lift Outlet Exh Supply Ride Outlet ON (OUT)
Lift Outlet
P
H
Exh
Push / Pull Control
Supply
Ride Outlet
Part Number
Voltage
Port Size
Temperature
Flow
LT112PA1LPA
Mechanical
1/8"
0°F to 120°F
.2 Cv
LT112HD1LPA
Mechanical
1/4"
0°F to 120°F
.83 Cv
Electrical Switch Up
Outlet #4 Exh Supply Electrical Switch Down
Outlet #2
J, K
R, S, M, N Outlet #4
Electrical Switch Control
Exh
Part Number
Voltage
Port Size
Temperature
Flow
LT112RA1RPA
12VDC
1/8"
0°F to 120°F
.75 Cv
LT112SA1RPA
24VDC
1/8"
0°F to 120°F
.75 Cv
LT112MA1RPA
12VDC
1/8"
-20°F to 120°F
.83 Cv
LT112NA1RPA
24VDC
1/8"
-20°F to 120°F
.83 Cv
LT112JD1RPA
12VDC
1/4"
0°F to 120°F
1.4 Cv
LT112KD1RPA
24VDC
1/4"
0°F to 120°F
1.4 Cv
Supply
Outlet #2
Pressurized
Outlet #4 Exh Supply Outlet #2 No Pressure
Outlet #4
External Pilot Controls
Exh
Supply
Outlet #2
Part Number
Voltage
Port Size
Temperature
Flow
LT112VA1LPA
Remote Pilot
1/8"
-20°F to 120°F
.75 Cv
7
Pneumatic
Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/automation/transportation
Catalog 0675/USA
LOAD-TAMER™ Air Control Module L Bracket Mount
(Revised 3/20/06)
Common Part Numbers
L Bracket Mount OFF (OUT)
Lift Outlet Exh Supply Ride Outlet ON (IN)
Lift Outlet
P
H
Exh
Supply
Push / Pull Control Ride Outlet
Part Number
Voltage
Port Size
Temperature
Flow
LT113PA1LPA
Mechanical
1/8"
0°F to 120°F
.2 Cv
LT113HD1LPA
Mechanical
1/4"
0°F to 120°F
.83 Cv
Electrical Switch Down
Outlet #4 Exh Supply Electrical Switch Up
Outlet #2
J, K Electrical Switch Control
R, S, M, N
Outlet #4 Exh
Part Number
Voltage
Port Size
Temperature
Flow
LT113RA1RPA
12VDC
1/8"
0°F to 120°F
.75 Cv
LT113SA1RPA
24VDC
1/8"
0°F to 120°F
.75 Cv
LT113MA1RPA
12VDC
1/8"
-20°F to 120°F
.83 Cv
LT113NA1RPA
24VDC
1/8"
-20°F to 120°F
.83 Cv
LT113JD1RPA
12VDC
1/4"
0°F to 120°F
1.4 Cv
LT113KD1RPA
24VDC
1/4"
0°F to 120°F
1.4 Cv
Supply
Outlet #2
Pressurized
Outlet #4 Exh
Supply
Outlet #2 No Pressure
Outlet #4 Exh
External Pilot Controls
Supply Outlet #2
Part Number
Voltage
Port Size
Temperature
Flow
LT113VA1LPA
Remote Pilot
1/8"
-20°F to 120°F
.75 Cv
8
Pneumatic
Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/automation/transportation
Air Control Module LOAD-TAMER™
Catalog 0675/USA
Model Number Index BOLD OPTIONS ARE STANDARD
Model Configuration Housing
LT1
1
Base Load-Tamer LT1 Standard Configuration 1 Single
1
Valve
Regulator
Gauge
P
A
1
Factory Engineering Function Designator Level
R
Regulator A* 1/8" w/o Gauge Ports D* 1/4" High Flow with Gauge Ports
P Factory Designation P Parker Label G Generic Label
A Engineering Level A Current Level
* Inlet / Outlet Ports are the same as Regulator Option.
Function - With Knob Out (Toggle Up) R Raise Axle L Lower Axle
Housing Plastic Flat Plate L Bracket Plastic w/ Mounting Holes X No Housing 1* 2 3 4*
Gauge 1 Lighted
* Not Available with “D” Regulator Option.
Valve P Push / Pull - Mechanical T Toggle - Mechanical R Switch - Electrical 12VDC S Switch - Electrical 24VDC H† High Flow - Mechanical (1/4" Only) J* High Flow - Switch Elec. 12VDC K* High Flow - Switch Elec. 24VDC M**Low Temp Switch Elec. 12VDC N** Low Temp Switch Elec. 24VDC V** Low Temp External Remote Pilot *
Not Available with “A” Regulator Option, Only Available with “2” & “3” Housing Options. ** Only Available with “A” Regulator Option. †
Only Available with “D” Regulator Option, Only Available with “2” & “3” Housing Options.
9
Pneumatic
Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/automation/transportation
Catalog 0675/USA
LOAD-TAMER™ Air Control Module Specifications, Kits & Accessories
(Revised 3/20/06)
Technical Data
NOTES: All units equipped with pressure regulator knob.
Specifications Port Sizes (excluding Pre-plumbed Ports): Valve Option P, E, T, R, S, M, & N Inlet .................................................................. 1/8 NPTF Outlets .............................................................. 1/8 NPTF
!
Valve Option H, J & K Inlet .................................................................. 1/4 NPTF Outlets .............................................................. 1/4 NPTF
CAUTION: If it is possible that the ambient temperature may fall below freezing, the medium must be moisture free to prevent internal damage or unpredictable behavior.
Kits & Accessories
Maximum Operating Pressure .................. 160 PSIG (11 bar)
Item
Valve Option P, E, T, R, S, J, K & H Operating Temperature ............ 0°F to 120°F (-18°C to 49°C)
Net Weight ....................................... 1/8, 1 lb. 14 oz. (0.85 kg) 1/4, 2 lb. 13 oz. (1.28 kg)
Valve Option
1
2
P0328401
Lighted Gauge
3
14R013FC 14R1C00094 05R113A
1/8" Regulator 1/8" Low Temp Regulator 1/4" Regulator
Gauge Scale .......................................................... 160 PSIG Lamp Voltage ................................................................... 12V
Description Plastic Housing Plastic Housing Flat Plate Flat Plate Flat Plate L Bracket L Bracket L Bracket
Valve Option M, N & V Operating Temperature ......... -20°F to 120°F (-28°C to 49°C) Flow Rating P & T ........................................................................ 0.20 Cv R & S ........................................................................ 0.75 Cv J & K ........................................................................ 1.40 Cv H, M, N & V ................................................................ 0.83 Cv
Part No. B523177 B52317701 SBCF0476 SBCF047601 SBCF047602 SBCF0462 SBCF046201 SBCF046202
P,T,R,S,M,N V P,T,R,S,M,N H,V J,K P,T,R,S,M,N H,V J,K
* Contact Parker Pneumatic Division for all other features
Application The LOAD-TAMER™ is engineered for vehicular applications such as air suspension systems and axle lift installations, where the LOAD-TAMER™ control panel provides a convenient means of manually controlling the system. Control panel design provides for ease of mounting in the operator’s compartment.
Typical Installations Air Ride / Spring Lift
Air Ride / Air Lift
Air Supply
Air Supply Load Tamer
1
1
Load Tamer
Battery Ground
Battery Load Spring
Ground
Load Bag
Lift Bag 2
4
10
Pneumatic
2
Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/automation/transportation
Air Control Module LOAD-TAMER™
Catalog 0675/USA
Dimensions
Dimensions
1.50 (38)
1.50 (38)
3.34 (85)
P 1.50 (38)
3.34 (85)
T 1.50 (38)
3.29 (83)
1.50 (38)
3.29 (83)
V
M, N
1.65 (42)
R, S 1.65 (42)
3.51 (89)
3.29 (83)
H
4.49 (114)
J, K
Note: Letters indicate Valve Option. 7.05 (179)
2.64 (67)
2.50 (64)
6.75 (171)
4.86 (123)
4.50 (114)
Plastic Housing
L Bracket 6.75 (171) 6.13 (156)
0.6 (15)
4.50 (114)
3.88 (99)
Flat Plate
11
Pneumatic
Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/automation/transportation
Catalog 0695/USA
Offer of Sale
Air Control Module LOAD-TAMER™
The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors, are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions. Buyer’s order for any such item, when communicated to Parker Hannifin Corporation, its subsidiaries or an authorized distributor (“Seller”) verbally or in writing, shall constitute acceptance of this offer. notwithstanding any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time. 8. Buyer’s Property: Any designs, tools, patterns, materials, drawings, confidential information or equipment furnished by Buyer, or any other items which become Buyer’s property, may be considered obsolete and may be destroyed by Seller after two (2) consecutive years have elapsed without Buyer placing an order for the items which are manufactured using such property. Seller shall not be responsible for any loss or damage to such property while it is in Seller’s possession or control. 9. Taxes: Unless otherwise indicated on the face hereof, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of the items sold hereunder. If any such taxes must be paid by Seller or if Seller is liable for the collection of such tax, the amount thereof shall be in addition to the amounts for the items sold. Buyer agrees to pay all such taxes or to reimburse Seller therefore upon receipt of its invoice. If Buyer claims exemption from any sales, use or other tax imposed by any taxing authority, Buyer shall save Seller harmless from and against any such tax, together with any interest or penalties thereon which may be assessed if the items are held to be taxable. 10. Indemnity For Infringement of Intellectual Property Rights: Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this Part 10. Seller will defend and indemnify Buyer against allegations of infringement of U.S. patents, U.S. trademarks, copyrights, trade dress and trade secrets (hereinafter “Intellectual Property Rights”). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against Buyer based on an allegation that an item sold pursuant to this contract infringes the Intellectual Property Rights of a third party. Seller’s obligation to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If an item sold hereunder is subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole expense and option, procure for Buyer the right to continue using said item, replace or modify said item so as to make it noninfringing, or offer to accept return of said item and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by Buyer, or directed to items delivered hereunder for which the designs are specified in whole or part by Buyer, or infringements resulting from the modification, combination or use in a system of any item sold hereunder. The foregoing provisions of this Part 10 shall constitute Seller’s sole and exclusive liability and Buyer’s sole and exclusive remedy for infringement of Intellectual Property Rights. If a claim is based on information provided by Buyer or if the design for an item delivered hereunder is specified in whole or in part by Buyer, Buyer shall defend and indemnify Seller for all costs, expenses or judgements resulting from any claim that such item infringes any patent, trademark, copyright, trade dress, trade secret or any similar right. 11. Force Majeure: Seller does not assume the risk of and shall not be liable for delay or failure to perform any of Seller’s obligations by reason of circumstances beyond the reasonable control of Seller (hereinafter “Events of Force Majeure”). Events of Force Majeure shall include without limitation, accidents, acts of God, strikes or labor disputes, acts, laws, rules or regulations of any government or government agency, fires, floods, delays or failures in delivery of carriers or suppliers, shortages of materials and any other cause beyond Seller’s control. 12. Entire Agreement/Governing Law: The terms and conditions set forth herein, together with any amendments, modifications and any different terms or conditions expressly accepted by Seller in writing, shall constitute the entire Agreement concerning the items sold, and there are no oral or other representations or agreements which pertain thereto. This Agreement shall be governed in all respects by the law of the State of Ohio. No actions arising out of sale of the items sold hereunder or this Agreement may be brought by either party more than two (2) years after the cause of action accrues.
1. Terms and Conditions of Sale: All descriptions, quotations, proposals, offers, acknowledgments, acceptances and sales of Seller’s products are subject to and shall be governed exclusively by the terms and conditions stated herein. Buyer’s acceptance of any offer to sell is limited to these terms and conditions. Any terms or conditions in addition to, or inconsistent with those stated herein, proposed by Buyer in any acceptance of an offer by Seller, are hereby objected to. No such additional, different or inconsistent terms and conditions shall become part of the contract between Buyer and Seller unless expressly accepted in writing by Seller. Seller’s acceptance of any offer to purchase by Buyer is expressly conditional upon Buyer’s assent to all the terms and conditions stated herein, including any terms in addition to, or inconsistent with those contained in Buyer’s offer. Acceptance of Seller’s products shall in all events constitute such assent. 2. Payment: Payment shall be made by Buyer net 30 days from the date of delivery of the items purchased hereunder. Amounts not timely paid shall bear interest at the maximum rate permitted by law for each month or portion thereof that the Buyer is late in making payment. Any claims by Buyer for omissions or shortages in a shipment shall be waived unless Seller receives notice thereof within 30 days after Buyer’s receipt of the shipment. 3. Delivery: Unless otherwise provided on the face hereof, delivery shall be made F.O.B. Seller’s plant. Regardless of the method of delivery, however, risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. Any delivery dates shown are approximate only and Seller shall have no liability for any delays in delivery. 4. Warranty: Seller warrants that the items sold hereunder shall be free from defects in material or workmanship for a period of 18 months from date of shipment from Parker Hannifin Corporation. THIS WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY, GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MERCHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS, IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, OR COURSE OF DEALING ARE HEREBY DISCLAIMED. NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY OR PARTIALLY, TO BUYER’S DESIGN OR SPECIFICATIONS. 5. Limitation of Remedy: SELLER’S LIABILITY ARISING FROM OR IN ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT OF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BY BUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLD HEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARN OR STRICT LIABILITY. 6. Changes, Reschedules and Cancellations: Buyer may request to modify the designs or specifications for the items sold hereunder as well as the quantities and delivery dates thereof, or may request to cancel all or part of this order, however, no such requested modification or cancellation shall become part of the contract between Buyer and Seller unless accepted by Seller in a written amendment to this Agreement. Acceptance of any such requested modification or cancellation shall be at Seller’s discretion, and shall be upon such terms and conditions as Seller may require. 7. Special Tooling: A tooling charge may be imposed for any special tooling, including without limitations, dies, fixtures, molds and patterns, acquired to manufacture items sold pursuant to this contract. Such special tooling shall be and remain Seller’s property notwithstanding payment of any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the items sold hereunder, even if such apparatus has been specially converted or adapted for such manufacture and
12
Pneumatic
Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/automation/transportation
Parker Hannifin Corporation 6035 Parkland Blvd. Cleveland, Ohio 44124-4141 Telephone: (216) 896-3000 Fax: (216) 896-4000 www.parker.com
About Parker Hannifin Corporation Parker Hannifin is a leading global motion-control company dedicated to delivering premier customer service. A Fortune 500 corporation listed on the New York Stock Exchange (PH), our components and systems comprise over 1,400 product lines that control motion in some 1,000 industrial and aerospace markets. Parker is the only manufacturer to offer its customers a choice of hydraulic, pneumatic, and electromechanical motion-control solutions. Our Company has the largest distribution network in its field, with over 7,500 distributors serving nearly 400,000 customers worldwide.
Parker Hannifin Corporation
Parker’s Charter To be a leading worldwide manufacturer of components and systems for the builders and users of durable goods. More specifically, we will design, market and manufacture products controlling motion, flow and pressure. We will achieve profitable growth through premier customer service. Product Information North American customers seeking product information, the location of a nearby distributor, or repair services will receive prompt attention by calling the Parker Product Information Center at our toll-free number: 1-800-C-PARKER (1-800-272-7537). In Europe, call 00800-C-PARKER-H (00800-2727-5374).
The Aerospace Group is a leader in the development, design, manufacture and servicing of control systems and components for aerospace and related high-technology markets, while achieving growth through premier customer service.
The Climate & Industrial Controls Group designs, manufactures and markets system-control and fluidhandling components and systems to refrigeration, airconditioning and industrial customers worldwide.
The Fluid Connectors Group designs, manufactures and markets rigid and flexible connectors, and associated products used in pneumatic and fluid systems.
The Seal Group designs, manufactures and distributes industrial and commercial sealing devices and related products by providing superior quality and total customer satisfaction.
The Hydraulics Group designs, produces and markets a full spectrum of hydraulic components and systems to builders and users of industrial and mobile machinery and equipment.
The Filtration Group designs, manufactures and markets quality filtration and clarification products, providing customers with the best value, quality, technical support, and global availability.
The Automation Group is a leading supplier of pneumatic and electromechanical components and systems to automation customers worldwide.
The Instrumentation Group is a global leader in the design, manufacture and distribution of high-quality critical flow components for worldwide process instrumentation, ultra-highpurity, medical and analytical applications.
Parker Pneumatic Sales Offices
North America
Europe
Parker Hannifin Pneumatic Division N. A. Head Quarter 8676 E. M89 Richland, MI 49083 Phone: 269-629-5575 Fax: 269-629-5385
Austria - Wr.Neustadt Tel: +43 2622 23501 Fax: +43 2622 66212
Norway - Langhus Tel: +47 6491 1000 Fax: +47 6491 1090
Belgium - Nivelles Tel: +32 067 280 900 Fax: +32 067 280 999
Poland - Warsaw Tel: +48 22 863 49 42 Fax: +48 22 863 49 44
Gulf Region 1701 N. Collins Blvd. #139 Richardson, TX 75080 Phone: 972-238-5020 Fax: 972-238-5029
Czech and Slovak Republics - Prague Tel: +420 283 085 221 Fax: +420 283 085 360
Portugal - Leça da Palmeira Tel: +351 22 999 7360 Fax: +351 22 996 1527
Denmark - Ishøj Tel: +45 43 560400 Fax: +45 43 733107
Romania - Bucharest Tel: +40 21 252 3382 Fax: +40 21 252 3381
Finland - Vantaa Tel: +358 9 4767 31 Fax: +358 9 4767 3201
Russia - Moscow Tel: +7 095 234 0054 Fax: +7 095 234 0528
France - Evreux Tel: +33 820 825 239 Fax: +33 820 029 870
Slovenia - Novo mesto Tel: +386 7337 6650 Fax: +386 7337 6651
Germany - Mettmann Tel: +49 2104 137-0 Fax: +49 2104 137-500
Spain - Madrid Tel: +34 91 675 7300 Fax: +34 91 675 7711
Greece - Athens Tel: +30 10 933 6450 Fax: +30 10 933 6451
Sweden - Spånga Tel: +46 (0) 8 5979 5000 Fax: +46 (0) 8 5979 5110
Hungary - Budapest Tel: +36 1 220 4155 Fax: +36 1 422 1525
Switzerland - Biel Tel: +41 32 3653711 Fax: +41 32 3653730
Italy - Corsico, Milan Tel: +39 02 4519 21 Fax: +39 02 4479 340
UK - Cannock Tel: +44 1543 456000 Fax: +44 1543 456001
Netherlands - Oldenzaal Tel: +31 541 585000 Fax: +31 541 585459
Ukraine - Kiev Tel: + 380 44 220 7432 Fax: + 380 44 220 6534
Midwest Region 6165 NW 86th Street, Bldg. A Johnston, IA 50131 Phone: 515-727-1640 Fax: 515-727-1679 Northeast Region 12 Rocky Mountain Blvd. Brick, NJ 08724 Phone: 732-836-1844 Fax: 732-836-1845 Pacific Region 1200 Westlake Avenue N. #815 Seattle, WA 98109 Phone: 206-285-7559 Fax: 206-285-7432 Motion & Control, Canada 8485 Parkhill Drive Milton, Ontario L9T 5E9 Phone: 905-693-3000 Fax: 905-876-1758
Parker Hannifin Corporation Pneumatic Division 8676 E. M89 P.O. Box 901 Richland, MI 49083 USA Tel: (269) 629-5000 Fax: (269) 629-5385 Catalog 0675/USA 3/06 IGS U.S.A.
Customer/Technical Service Tel: (269) 629-5575 Fax: (269) 629-5385 Web site: www.parker.com/automation/transportation E-mail:
[email protected]
