Underground Containers

Waste solutions of the future

Underground Containers 1 2 3 4 5

We are building the future for our children – let’s build the waste solutions of their future. We are one of the leading suppliers of larger solutions for waste sorting. Our standard product range covers virtually everything. As a result of increased requirements for environmentally friendly and cost-effective solutions, we continue to provide several solutions adapted to the individual customer’s needs. Recycling includes the requirement to sort the waste in multiple containers. For apartment complexes, terraced houses, and other multiple-family dwellings gathered on reduced acreages, it can be challenging with so many containers in close proximity to one another. Few manage to make it look neat, and many find the containers constantly filled beyond capacity. They smell bad, the risk of fire in the container increases, and it is a matter of time when rodents and other vermin begin paying their visits. The result is a less-than-desirable environment. This is one of the reasons why underground containers are gaining in popularity – not just in apartment complexes and terraced houses, but also in public space such as city centres, marinas, camp sites, swimming areas, parks, rest areas, hospitals, sporting facilities, schools, etc. Many want this solution for waste sorting and what other solution is better for people and the environment?

have developed our own solution. Our specialty in this area is a very solid construction with a long service life and customised solutions from the drawing table to the end product, including built-in safety platform, design, electronic monitoring, etc. Underground containers allow recycling of ordinary waste, glass, organic waste, cardboard and paper, disposable barbecue boxes and metal, etc. Around 70 % of the total structure is located below ground level. This high-efficiency system is self-compressing, the temperature is lower, and it causes fewer odours. From a financial standpoint, the investment often pays off within a short period of time. Together we are creating a better environment – rationally, safely, and comfortably – by choosing underground containers as the waste solution of the future.

Customised solutions for Scandinavian conditions

6

We have focused on Scandinavian suppliers of underground containers. The Swedish “BE LOW” series specialise in apartment complexes, joint ownership properties, campsites, golf courses, shopping centres, etc. For public spaces and municipal requirements we

Page

62

Underground Containers , “BE LOW” M 1300 / 3000 / 5000

64

Underground Containers , EN 5000

68

www.enviroglobal.de • [email protected] •  +49 5405 505-700

Before

After

At the Hvalstrand Bad seaside resort in Asker, Norway, the municipality wanted to create a better environment for patrons. The old waste containers were not a pretty sight. They constantly flowed over with rubbish, resulting in foul odour and visits by rodents and other vermin. They were certainly no positive contribution to the environment. Everyone is thrilled by the result. A total of three underground containers for recycling, divided into ordinary waste, plastic bottles/drinking bottles, and disposable barbecues/metal. The three containers resulted in a capacity increase from 3 x 100 litres to 1,500 litres. An enriching solution for comfort and the environment!

www.enviroglobal.de • [email protected] •  +49 5405 505-700

63

Containers: “BE LOW” M 1300 / 3000 / 5000

1

• Around 70 % of the total structure is located

under ground level • Lower temperatures below ground level

reduce odour problems • An investment that is quickly paid off

2 3 4 5

Markbehållare AB is one of Sweden’s leading manufacturers and suppliers of BE LOW underground container solutions. They have been providing rational waste management solutions for more than 25 years. Their experience is rooted in a well-developed European network of advanced production and logistics solutions that guarantee high product quality and on-time deliveries. It is the needs of the customers that drive the solutions. Together with the customers, we create an added value from a rational financial and environmentally friendly viewpoint.

The production is rooted in a well-developed European network of advanced production and logistics solutions that guarantee high product quality and on-time deliveries.

6

More and more customers are discovering the benefits of underground containers. The perfect solution for apartment complexes, terraced houses, camp sites, rest areas, golf courses, parks, and public facilities. Foul-smelling containers filled beyond capacity will be just a thing of the past. Strategic placement of containers reduces noise and gas seepage in the area and provides a safer environment for children at play.

64

www.enviroglobal.de • [email protected] •  +49 5405 505-700

Be Low

Lids and hatches We offer a wide selection of lids and hatches for our containers. Hatches with a choice of colour and drop openings.

Luker for kildesortering: Lids with the usual shaft drop, 300 mm in diameter, and vertical mounting. Can also be pre-drilled for ASSA lock cylinders.

1 2

Lid with flat drop opening with ∅600, 400 og 300 mm.

Lids are available in different colours for recycling of glass, paper, ordinary waste, etc. A lock is available for all hatches. A 5000-litre container is available for hatches with a cylinder opening. The hatches are labelled with a symbol according to the waste type.

Container Our underground containers have a brand new and stable design, specially developed for sub-surface placement. The bottom of the containers is made of 10-12 mm polyethylene and are completely tight. They feature eyebolts, making them simple to secure and place when burying. The front side of the container features a built-in lock for the lid that requires a special key to open. The back side features an expansion that accommodates a “spring-up” type hinge – a tested solution from the automotive industry – as well as fastening screws from the acid-proof steel tapes that keep the outer layer in place. A drainage channel runs alongside the container. Wastewater cleansing and removal of any excess water are achieved by simply connecting a hose with a fast connection to the rear of the container.

3 4 5 6

BE LOW underground containers make the immediate environment more comfortable and practical for residents.

www.enviroglobal.de • [email protected] •  +49 5405 505-700

65

Be Low The needs of the customers drive the solutions The containers are available in pressure impregnated wood and aluminium profiles in the colours gold, silver, and bronze. Other colours are available on request, but with some longer delivery time.

1 2

It is the needs of the customers that drive the solutions. Together with the customers, we create an added value from a rational financial, and environmentally friendly viewpoint.

With our experience, we tailor solutions according to the customers’ needs. The solutions are characterised by a high production quality and good total economics. With us, the customers get their own contact person who will personally manage the project from conception to completion.

3 4 5 6

The containers are available in pressure impregnated wood and aluminium profiles in the colours gold, silver, and bronze.

Emptying The waste is emptied into a bag. Hygienically speaking, when emptying household waste the lifting bag should be supplied with a disposable bag made of polyethylene (0.70 mm). During emptying, the disposable bag is discarded along with the waste, thus keeping the lifting bag clean. The lifting bag in the bottom of the waste is made of a closely knit PVC mesh that is approved for heavy lifting. It has been tested and certified by Labordata and the CE brand. The sturdy construction provides for a long service life. The lock on the rope is made of stainless steel and is easy to manoeuvre. To keep the release and locking rope clean, the bag is equipped with a practical storage pocket on the outside.

Emptying of glass A special bag has been developed to handle glass. This bag is made of a strong and sturdy material and fits models M 1300 and M 3000.

Emptying of paper Emptying of paper takes place directly from the lifting bag without the use of a disposable bag.

66

www.enviroglobal.de • [email protected] •  +49 5405 505-700

Be Low

Organic Waste Sorting begins in the household. If handled properly, the organic waste turns into soil. The system is based on collecting the waste in bio bags or biodegradable paper bags/ sacks throughout the entire handling process. • Less weight through water evaporation

1

• No odour problems • Better hygiene for waste management

companies • Paper and bio plastics are recyclable • The collection container is manufactured of galvanised steel profiles that make it sturdy, stable, and hygienic Can be emptied more than 100,000 times The system is well tested and has many years of operation. A string releases the locking mechanism to the emptying lid, allowing the bag to drop. The container is equipped with three lifting straps that are attached to the refuse vehicle.

2 Technical Specifications ∅: 700 mm

H: 2000 mm

Weight: 20 kg

3

Bag volume: 750 litres

4

Installation Use a contractor for installation. Dig a hole 150 cm down and level the bottom thoroughly. Lift the container in the eyebolts and twist it until the drop lid is properly positioned. Use a level for accuracy.

If multiple containers are placed next to each other, they should preferably be placed with 80 cm of space between them and 60 cm as an absolute minimum. Remember that the selected location must be easily accessible for emptying. You also need to pay attention to the drainage on the top around the ready installed container.

Accessories and Service

5 Type

Volume

Diam.

Weight

Height

M 1300 1300 litres 850 mm

95 kg

2400 mm

M 3000

3000 litres 1250 mm

120 kg

2400 mm

M 5000 5000 litres 1600 mm

160 kg

2400 mm

diam.

height

Start filling with pebbles and avoid placing pebbles that are too big against the container wall. In the event of high ground water, you should fasten the container using a 1m³ piece of concrete that is placed against the attachment on the bottom of the container.

6

The container, which is available in three sizes, is completely tight and consists of rotary cast polyethylene with a wall thickness of 10-12 mm. The hatches and lids are vacuum shaped by the polyethylene. The product consists of re-circulated material and does not emit any hazardous gases in case of fire. Models 1300 and 3000 are used for ordinary waste, paper, and glass. Model 5000 is used for ordinary waste and paper.

We offer a comprehensive selection of accessories for underground containers. Lifting bags in all sizes, brackets, hatches and lids, wood panels, signs, and drop shafts with attachments. For everyday operations, we offer a full assortment of disposable bags.

BE LOW is available in three sizes: 1300, 3000, and 5000 litres.

www.enviroglobal.de • [email protected] •  +49 5405 505-700

67

Underground Containers: EN 5000 • Customised solutions • Advanced or simple electronics

1 2 3 4 5

Restavfall

• Quality for an extended service life • Simple to operate

Based on the tough Scandinavian climate, we have developed the EN 5000 to endure most conditions – a very solid solution built to last a lifetime. This, along with individually customised solutions, makes this model highly attractive for municipalities and central government entities, as well as for larger private players. The EN 5000 is particularly geared towards city centres, rest areas, sporting facilities, apartment complexes, public buildings such as schools, retirement homes, parks, etc. The concrete elements are produced in Norway, among other places, and are thus quality assured against deviation in design. These are service-friendly solutions, and the essential parts are made of galvanised steel. Our strength is market proximity, and we customise according to measurements as well as design. This is an advantage to the customers since they do not become dependent on a few suppliers over time. Maintenance is minimal. EN 5000 will please its users year after year, and it is a solution for the modern society of the future.

From the drawing board to the end product. The water resistant concrete element and safety platform are available in a standard design. Container top with drop solutions – the functions and platform can be designed and delivered according to customer specifications.

Water resistant concrete element

Concrete elements produced in Norway are quality assured against deviations in thickness, height, unevenness, and angle distortion. In addition, the elements have a smooth and even surface. For major plant jobs, casting moulds for the concrete element can be hired out and transported to the nearest concrete factory.

EN 5000 consists of

6

This illustration shows a water resistant concrete element placed in a prepared foundation. Placement of concrete elements must be performed by an authorised contractor. Reinforcement in stainless steel is used in the top part. This prevents rust from forming in the reinforcement and the concrete from cracking. For extra protection against water, Xypex can be added to the concrete mixture. Xypex will react with water and seal pores and any fissures up to 0.4 mm. Exterior lifting ears are standard. Can be mounted on the inside if desired. Wing attachment. Wings can be attached to the lower part of the elements to prevent rising.

Containertop Customisable design.

2 3

1

Several hook systems are available. The dual hook system is the most common one today for containers that are emptied through the bottom.

4

5 6

68

Restavfall

1. Drop lid. Select a drop lid according to the type of waste that will be discarded. Available with an electronic solution for access control if desired 2. The electronics are operated with the help of a solar cell panel and a battery 3. Platform – several varieties available 4. Container 5. Safety Platform 6. Concrete element and interior framework

Accessories

During the system period, a concrete lid is adapted to the element as added safety to prevent fall accidents and to secure the containers against damage.

www.enviroglobal.de • [email protected] •  +49 5405 505-700

EN 5000 Underground Drop Solutions EN 5000 is comes with different drop solutions. The drop lid/ drawer is equipped with a standard safety plate that prevents direct access to the actual container when the drop lid/drawer is open. The drop lid is closed automatically when released and is designed to prevent rainwater from entering. Pedals are also available for easier operation. The lid on the drop parts is made of stainless steel. The drop shaft is suitable for domestic waste and business waste, as well as for glass and metals. The lid is available without a lock or with a manual key lock for the non-electronic version. Access to the electronics is simple, and the display is shock resistant in a transparent material. A large service slot is mounted on the drop shaft, which is also prepared for servicing the container/liquid for odour control. We offer two models – a 60-litre model based on domestic waste and a 1000-litre model based on commercial waste. In the drop lid a plate is mounted that regulates the volume in the chamber according to waste type.

For glass and metal waste, a cover is available on a drawer with holes for bottles, boxes, and similar devices with an installed rubber lip. For cardboard, it is recommended to use a business column of 90-110 litres that is wider and has a larger receiving capacity.

1 The EN 5000 comes with different drop solutions. The drawer for ordinary waste is a standard drop lid, which is also often used for bioplastic packaging, textiles, etc. For cardboard/paper, the opening is limited to 15-25 cm. For the solution for glass/metal, the drawer is covered by a steel plate with a 100-120 mm hole. A duct leads the waste straight into the container.

2 3

Electronic access authorisation and monitoring of fill level

4

The electronic system is available with a web hotel and an IT solution for fill level measurement and access control. As optional equipment, the EN 5000 is available with a solar cell panel, electronic access authorisation, and monitoring of fill level. The fill level information can go straight to the waste management company, who will then have the opportunity to plan collection on an as-needed basis and to the financial benefit of the customer. If there is a desire to limit use, access can be authorised by using a key tag/card. There is a wealth of solutions when joining GPS; Google maps; and messages by Internet, e-mail, text messaging, or fax. Contact us for further information.

5 6

A solar cell panel (specially designed) that absorbs energy even in shady surroundings.

Display with electronic access control using RFID tags.

In the future, underground containers will dominate the local environment.

www.enviroglobal.de • [email protected] •  +49 5405 505-700

69

EN 5000 Underground Safety Platform

1

The interior framework and the safety platform are manufactured in galvanised steel. It is built in a way that when lifting and emptying, the platform rises and closes the tank opening. The platform locks itself when the container is removed from the tank. The platform is a two-part grate, allowing for easy access to the tank for any maintenance and inspection. The platform is often square shaped and is available with a non-skid surface. The platform is available in standard aluminium (also available in a rubber design) with framework for paving stones.

2

Platform. Shown here with a combination of aluminium, asphalt, and paving stones. The interior framework and safety platform are developed so that when lifting and emptying, the platform rises and closes the tank opening.

3 4

Container

5

The container is manufactured in galvanised steel and is available in a standard 5 m³. 3 m³ and 4 m³ available on request. Sidewalls and corner profiles are available in 2 mm bent plates. The profiles and plates are bolted together through punched holes. The solid steel structure is capable of withstanding the strain from the different types of waste. The structure makes it simple to replace damaged plates and profiles.

6

When using the container for glass and metal packaging, it can be soundproofed by mounting a 2 mm rubber sheet on the bottom hatch and, between the grooves of the platform, installing a 75 mm acoustic plate with dual-sided protective sheet.

Rough Drawing

Container and containertop shown during installation.

Drainage channel

Concrete element

Excavation width adapted to local conditions Extra attachment Top cover (asphalt, paving stones etc.) Rough draining mass, min Ø20/ 30 mm Draining mass, adapted to local conditions Concrete element Extra attachment at groundwater level higher than 800 mm below terrain Leveled compressed mass, or lightweight concrete Adapted to local conditions

70

www.enviroglobal.de • [email protected] •  +49 5405 505-700

EN 5000 Underground Lifting Systems We offer several types of lifting systems. The single-hook system is especially adapted to cranes with power lock, rotary hook, and an Avermann compactor solution. An ordinary tow truck can also be used, but in such case the container will have to be lowered onto the tray to close/lock the bottom lid. The dual-hook system is based on the use of traditional cranes.

We have developed a special compactor for cost-effective and efficient emptying of containers from the bottom. The compactor is operated by the vehicle’s power supply and hydraulics. A crane truck can be used.

1 We offer several types of lifting systems. The single-hook system can be used by ordinary tow trucks. This one has a large lid that is opened, and the waste is emptied. The dual-hook system is based on the use of traditional cranes and can be handled by most waste management companies. One of the hooks is used for lifting and the other one for manoeuvring the bottom lid, which is split in two.

Technical specifications EN 5000

2 3

Outer container

Emptying shown with singlehook system and tow truck.

Outside measurements H x W x L 2600 x 1950 x 1950 mm

Service and Maintenance The EN 5000 is designed for a long service life. For this reason, we place special focus on service friendliness. There is easy access to vital technical parts such as electronic controls, magnetic lock, etc. Heavy, difficult lifting in everyday operations is avoided. In addition, the drop unit from the container is mounted from the outside. This increases the service ability considerably. Other than the need for cleaning, maintenance is minimal. The elements can be flushed clean with a high-pressure hose. To minimise odour, an odour cartridge is mounted on the container part. In certain instances, water may accumulate on the bottom. It is recommended that the water be emptied with a vacuum tanker. Container top with a dual lifting hook

Inside measurements H x W x L

2480 x 1715 x 1715

Wall thickness

120 mm

Weight

6670 kg

Lifting point

4+4 inside and out

Drainage connection

75 mm

Material

B45 waterproof concrete

Min. mass removal

10.4 m³

4 5

Container top and platform Measurements H x W x L

1296 x 679 x 606 mm

Weight

150 kg

Colour

Choice of RAL colour

Material

Galvanised/stainless steel

Load capacity, max.

5000 kg/ 1000 kg point load

6

Safety platform and framework Outside measurements H x W x L 2520 x 1710 x 1710 Weight

220 kg

Material

Galvanised steel

Concrete share

2 @ 140 kg

Container 5 m³ Outside measurements H x W x L 2260 x 1460 x 1460 mm

The seaside resort in Asker Municipality, Norway, was having a big problem with handling waste around disposable barbecues. They chose to use an own container for this. After the first season in the summer of 2010, Asker Municipality and the renovation company was very satisfied by the solution. Recycling was working perfectly!

Weight

375 kg

Volume

4817 litres

Material

Galvanised steel

Liquid collection, emptying lid

approx. 225 litres

Load capacity, max.

2087 kg

Max lift (own weight + waste)

3940 kg

Max fill level (% of volume)

85 %

www.enviroglobal.de • [email protected] •  +49 5405 505-700

71

Service

2

Satisfied customers are our ambition.

We are cooperating with international service partners and provide assistance, perform installations, and handle the periodic service of systems. Partners with mobile workshops enable us to reach our customers on a short notice. In partnership with EnviroPac and Avermann, our servicepartners have installed hundreds of systems with customised machinery and equipment in connection with building stock. Our customers receive a financial and environmentally friendly benefit.

Safety: Our service partners are always on duty.

www.enviroglobal.de • [email protected] •  +49 5405 505-700

33

Recycling

1 2 3 4 5 6

For more than 15 years, our shareholders have developed and produced customised product solutions for recycling and compacting. We work in partnership with waste management companies worldwide. Together with the customers, we reach solutions that give results, not just for waste management, but also in other areas. A successful result requires recycling to be simple and userfocused. It has to start at each person’s workplace and cover the entire process, via the cleaning personnel and all the way to when the waste management company picks up the waste and delivers it pre-sorted to recycling at the landfill.

9

Most people are aware of the positive effects recycling has on the environment. However, not everyone is aware of the additional positive effects that it has on each individual business:

Clear labelling of recycling is important

Knowledge

A successful result requires recycling to be simple and planned. It is important to communicate clearly with the user.

We have systematised our knowledge and offer a recycling analysis. If, in addition, you have any questions about environmental certification, we provide useful tips and recommend continued progress in the process. Contact us for further information on:

It has to start at each person’s workplace and cover the entire process, via the cleaning personnel and all the way to when the waste management company picks up the waste and delivers it presorted to recycling at the landfill.

Paper Symbolic labels for waste types

We carry labels in three different sizes. For further Colored information, see page 133. plastic wrap Wet organic waste

134

• Results in less money spent on waste management company • Results in better and safer routines • Results in better health, environment, and safety • Used for recycling to a greater degree • Results in a cleaner and more pleasant environment • Results in less refuse from waste management company • Results in less transport and lower CO² emissions ... and in most cases, the changes that were implemented by investing in machinery, equipment, and the reorganisation of the waste handling will pay for themselves within a short period of time. In other words, a considerable financial and health-related benefit is gained, in addition to the environmental accounts.

7 8

Recycling combined with compacting machinery and equipment

Plastic bottles, cans and trays

Glass and

Paper

Ordinary waste

[email protected]

We contribute to keeping the waste or the resources within the cycle, thereby reducing the need to continuously use new natural resources.

www.enviroglobal.de • [email protected] •  +49 5405 505-700

EnviroGlobal GmbH Lengericher Landstraße 35 D-49078 Osnabrück Tel. +495405 505700 [email protected] • www.enviroglobal.de

Norway:

Denmark:

Sweden:

EnviroPac AS Kakkelovnskroken 1 N-0954 Oslo Tel. +47 400 06310 • Fax +47 22 70 00 81 www.enviropac.no

EnviroPac A/S Ryttermarken 4 DK-3520 Farum Tel. +45 3252 8860 • Fax +45 3251 8860 www.enviropac.dk

Jet Marketing AB Grimboåsen 5 SE-417 49 Göteborg Tel. +46 31-559980 • Fax +46 31-559981 www.jetmarketing.se