Uni Marin Products AS Competence In Water Blasting Equipment

UMP .

- 27 -

Blasting Equipment

VERNE UTSTYR FOR HØYTRYKK SPYLING:

Uni Marin Products AS Gneisveien 14 Box 1215 N-3205 Sandefjord Tel. (47) 3342 6980 Fax (47) 3342 6981 e-mail: [email protected]

Uni Marin Products AS

UMP

- 28 -

Blasting Equipment

Competence In Water Blasting Equipment

Individual Protection for high and ultra high pressure cleaning up to 2000 bars Certificate EU n°04698084 This line of clothing with top level safety and suppleness was developed together with users all over the world. The safety level is given by the unique multi-layer fabric. The outer material is oil and dirt repellent. High trousers

Overall

The high trousers are available with different protected areas on the front side. The braces are adjustable and the trouser legs are equipped with zippers all along the out side, protected by a velcro locked flap. All seams are taped. The high trousers give an effective protection and are very comfortable to wear.

The overall protects the wearer from wet and dirt as well as from water pressure up to 180 bar. The overall can be fitted with protection for up to 1000 bar on the front side and on the legs. The integrated hood allows a tight fit around the head. The zipper is covered by a velcro stormflap. Arms and legs are equipped with soft, elastic cuffs for maximum tightness and comfort. Overalls with extra protecion on the front side of the legs only have cuffs on the arms. Braces are fitted inside the overall.

Two sizes are available: S-M (small + medium) L-XXL (large and extra large). Weight: 2,8 kg (for L-XXL, 2000 bar)

5 sizes available Weight: ≈3 kg for XL, 1000 bar)

Jacket The front side is entirely protected, as well as the lower part of the back. Two sizes are available: S-M and L-XXL. Weight: 1,2 kg (for L-XXL, 2000 bar)

Waistcoat The vest is the most comfortable top. Very important protection for neck and shoulders. Also available with back protection and extra tip for lower front

Uni Marin Products AS Gneisveien 14 Box 1215 N-3205 Sandefjord Tel. (47) 3342 6980 Fax (47) 3342 6981 e-mail: [email protected]

Uni Marin Products AS

UMP

- 29 -

Blasting Equipment

Competence In Water Blasting Equipment

Individual Protection for ultra high pressure cleaning till 2000 bars Certificate EU n°04698084 Hand Protection

Gaiters

Protects the hand and underarm if the hose or a coupling breaks. The entire area is protected. One size, specific right and left hand.

The gaiters are intended to be worn outside the protective boots. 5 clips ensure that they securely stay in place. Very supple and light. One size

Weight: 0,2 kg (2000 bar)

Weight: 1,6 kg/pair (2000 bar)

Hose Protection The hose protection is placed on the hose at the connection to the pistol. At the top is a 25 cm solid steel collar. This protects effectively against damage on the hose and connections. An adjustable ribbon is tightening the hose to the pistol. The hose protection is very smooth and light weight. Available in three lengths: 70, 140 und 180 cm … and in two diameters: 40 und 60 mm

Protective Suit Protective overall for wet and dry conditions. It is designed to meet tough industrial demands concerning function and safety. The green suit can comfortably be worn under the UHP clothings. Material: Coating: Weight: XL) Seams:

Polyamid Polyurethane 1100g (Size

Double seam, taped EC-marking: EN 465 Pockets: 2 chest pockets, 1 leg pocket Sizes: S - XXL General: Braces, for increased comfort

Ventilation This regulator can be connected to the green overall and the red UHP. Inside are channels to the arms and legs integrated. This will create a comfortable climate inside the suit. The regulator and the channels are an option to the suit and must be ordered from start. You need additionally a compressor and a line for the air. The airflow is 5-150l/min.

Uni Marin Products AS Gneisveien 14 Box 1215 N-3205 Sandefjord Tel. (47) 3342 6980 Fax (47) 3342 6981 e-mail: [email protected]

Uni Marin Products AS

UMP

- 30 -

Blasting Equipment

Competence In Water Blasting Equipment

VERNE STØVLER TIL MAX 2500 BAR PRIMO 800 Model based on article Prisma, with protection up to 800 bar Grundmodell gemäss Artikel Prisma, mit Schutz bis 800 bar Modèle basé sur l'article Prisma, avec protection jusqu'à 800 bar Art. N° Sizes: Grössen:

81620 39 - 48

ULTRA 17 Model based on article Prisma, with protection up to 1700 bar Grundmodell gemäss Artikel Prisma, mit Schutz bis 1700 bar Art. N° Sizes: Grössen: Tailles: Color:

81621 39 - 48 yellow/black

ULTRA 25 Model based on article Prisma, with protection up to 2500 bar Grundmodell gemäss Artikel Prisma, mit Schutz bis 2500 bar Modèle basé sur l'article Prisma, avec protection jusqu'à 2500 bar Art. N°

81622

Sizes: Grössen: Color:

39 - 48 yellow/black

The protection was tested according the directives of BGR 191 (see table below) ) ULTRA ULTRA PRIMO

Force de recul - Reaction force - Rückstosskraft 234 N 250 N 117 N Diamètre de buse - Diameter of nozzle - Durchmesser der Düse 0,8 mm 1,0 mm 1,0 mm Distance buse/botte - Distance nozzle/boot - Abstand Düse/Stiefel 75 mm 75 mm 75 mm Vitesse de passage - Speed - Vorschubgeschwindigkeit 0,2 m/s 0,2 m/s 0,2 m/s Débit - Flow rate - Durchfluss 20 l/min 25 l/min 17,7 l/min Pression de test - Testing pressure - Testdruck 2500 bar 1700 bar 800 bar Passage du jet sur le devant du pied au niveau de la coquille et sur le cou-de-pied - Jet passage on the front of the foot behind the toe cap, in the aerea of the instep. Ueberfahren des Vorderfusses hinter der Schutzkappe im Bereich des Rists.

Uni Marin Products AS Gneisveien 14 Box 1215 N-3205 Sandefjord Tel. (47) 3342 6980 Fax (47) 3342 6981 e-mail: [email protected]

Uni Marin Products AS Competence In Water Blasting Equipment

UMP

- 31 -

Blasting Equipment

Security boots for hand hold High Pressure Water Jetting Applications with certification label The professional associations recommend the use of boots suited for 1700 bar. Therefore, the test and certification center asked for the certification specific requirements. Our boots are certified according to the norm EN 345-1 of June 1997, BGR 191, paragraph 3.1.5.5.3 (Professional Regulations of Security and Health at Work - Utilization of foot and leg protection), authorized and notified on pos. n° 0299 (Fachausschuss Persönliche Schutzausrüstungen Prüf- und Zertifizierungsstelle, Klinkerweg 4, DE-40699 Erkrath). - High part and sole of PVC, without lead and cadmium - Multi-layer construction to protect against the very high pressure water-jet - Stripes on the instep for a better suppleness - Take off flap - Steel toe cap and steel intermediary sole - Skidproof and antistatic sole, resistant at hydrocarbons, chemical products, fats and oils Schutzstiefel für den Einsatz bei Handgeführten Hochdruck-Wasserstrahl-Arbeiten mit Prüfsiegel Die Berufsgenossenschaft empfiehlt nur Stiefel, die ab 1700 bar geeignet sind. Dafür werden von der Prüf- und Zertifizierungsstelle spezielle Anforderungen zur Zertifizierung gestellt. Unsere Stiefel sind zertifiziert gem. Prüfgrundlage: EN 345-1: Juni 1997, BGR 191, Absatz 3.1.5.5.3 (Berufsgenossenschaftliche Regeln für Sicherheit und Gesundheit bei der ArbeitBenutzung von Fuss- und Beinschutz), durch zugelassene und notifizierte Stelle Nr. 0299 (Fachausschuss Persönliche Schutzausrüstungen Prüf- und Zertifizierungsstelle, Klinkerweg 4, DE-40699 Erkrath). - Schaft und Sohle aus PVC, blei- und kadmiumfrei - Mehrschichtiger Spezialaufbau gegen extrem hohen Wasserdruck - Ristfalten, als Hilfe zum besseren Abrollen des Stiefels - Fersenkappe erleichtert das Ausziehen - Stahlkappe und Stahlsohle - Profilsohle, Gleitschutz und Antistatik, beständig gegen Kohlenwasserstoffe, chemische Produkte, Fette und Öle

Uni Marin Products AS Gneisveien 14 Box 1215 N-3205 Sandefjord Tel. (47) 3342 6980 Fax (47) 3342 6981 e-mail: [email protected]

Uni Marin Products AS

UMP

- 32 -

Blasting Equipment

Competence In Water Blasting Equipment

VERNEHJELMER OG ANSIKT BESKYTTELSE Helmet - Helm - Casque ¾ with face screen, chinguard and neck cape.

Different versions available ¾ mit Gesichtsschild, Kinnschutz und Nackenschutz.

Verschiedene Modelle lieferbar ¾ avec visière, protection du menton et protection de la nuque.

Différents modèles disponibles Type 1125 Type 1100 ¾ with polyester cradle and ¾ with plastic cradle, sweat band, standards EN standards EN 397. A neck 397. A neck cape can be cape can be fitted. fitted. ¾ mit Polyester¾ mit PlastikInnenausstattung und Innenausstattung, gemäss Schweissband, gemäss Norm Norm EN 397. Auch mit EN 397. Auch mit Nackenschutz lieferbar. Nackenschutz lieferbar ¾ ¾ Face shield - Gesichtsschild - Visière

¾ with carrier, standards EN 166 Also available with chinguard ¾ mit Halterung, gemäss Norm EN 166 Auch mit Kinnschutz lieferbar

Ear defender - Gehörschutz - Protection anti-bruit

standards EN 352 S41 classic (H=29dB,M=22dB,L=15dB,SNR=25dB) S42 high performance (H=34dB,M=27dB,L=20dB,SNR=30dB) S570 mounting clip set gemäss Norm EN 352 S41 klassisch (H=29dB, M=22dB, L=15dB, SNR=25dB) S42 hohe Schalldämmung (H=34dB,M=27dB,L=20dB,SNR=30dB)

S570 Montageclips

Uni Marin Products AS Gneisveien 14 Box 1215 N-3205 Sandefjord Tel. (47) 3342 6980 Fax (47) 3342 6981 e-mail: [email protected]