ß 82030
Workshop furnishings Workbenches
ß Type Workbenches with beechwood solid workbench top 40 mm thick, oiled on both sides, framework-type glued. Base frame/housing solidly welded frame made of square tubular steel (45 x 45 x 2 mm), with levelling system. Self-supporting with welded-in racks. Drawers 4-fold ball-bearing mounted with attached rail (incl. of marking strips). Load capacity 70 kg, extension 90%. Swing doors with attached rail (incl. of marking strips), self-closing. Internal dimensions: W x T 560 x 620 mm.
Centralised locking, each family lock with 2 keys. Standard finish housing RAL 7035 light grey, fronts RAL 5012 light blue. Environmentally friendly powder-coating.
Height adjustment
82030 201-210 Type With fixed working height 840 mm.
82030 206+306
82030 301-310 Type With adjustable working height 840-1040 mm.
82030 210+310
82030 201+301
82030 205+305
82030 203+303
82030 204+304
82030 202+302
Working height mm Length x width mm 1500 x 700 1500 x 700 1500 x 700 1500 x 700 2000 x 700 2000 x 700 2000 x 700
82035 - 82037
drawers number of x height mm 1x60, 2x90, 1x120, 1x180 3x180 2x180 1x180 1x60, 2x90, 1x120, 1x180 3x180 2x180
doors number of x height mm 1x540 2x360 1x360 1x540 1x540 2x360
840 82030
shelf number of 1 1 1 1
…
840-1040 82030
210 202 201 203 206 205 204
… 310 302 301 303 306 305 304
Drawer fitting assortments for workbenches cat.-no. 82030
ß
82037 Type 3 longitudinal dividers, 16 cross dividers.
82035 Type 1 longitudinal divider, 4 cross dividers.
82035
82036
82037
82036 Type 2 longitudinal dividers, 9 cross dividers.
for drawer height mm 60 / 90 120 / 150 180-270
82038
82035
… 201 202 203
82036
… 201 202 203
eng/OP
… 201 202 203
Back walls for workbenches cat.-no. 82030
Type Material MDF.
for workbench length mm 1500 2000
82037
82038
height mm 100 100
82038
… 201 202
www.hhw.de
82.1
8
• Workbenches 82055 - 82070
Workbenches series 100
ß Type Height of workbench 850 mm. Workbench top: 17-layer glued in compliance with DIN 68705 made of damped beechwood (Multiplex). Dimensions W x D x T: 1500 / 2000 x 700 x 50 mm. Base frame: Width x depth 1310 x 615 mm. Sheet steel, with square end tubular steel frame 45 x 45 x 2 mm. For secure stand, plastic caps for floor care. Drawers: With perforated base and laterally slotted rails. Internal dimensions 500 x 540 mm. With extremely sturdy roller guidings. Double-drawer stop, up to 100 kg load capacity. Continuous, integrated rails, with plastic-covered profile and marking strips. Doors: Standard more than 180°. Centralised locking: Only 1 lock with 2 keys for both sides (except desktype workbench cat.-no. 82070 501-601, which features 2 locks), main locking system available at a higher price. Design: Inside positioned doors and drawers represent an attractive design, without restrictions of functionality.
8
Finish: Standard two colours. Housing RAL 7035 light grey. Drawers and doors see table! RAL 5012 light blue (standard finish) or RAL 6011 reseda green. Further finishes in RAL 3002, 5010, 5018, 5023, 7032 and 9011 without additional cost (not in stock).
82060 Type Mirror-inverted version available as well.
Model 106
82060
Model 109
82065
Model 107
82067
Model 119
82070
82065 Type Right side open. Mirror-inverted version available as well. 82067 Type Right side open. Mirror-inverted version available as well. 82070 Type Desk-type workbenches.
RAL 7035/5012 82055
Drawers height mm 2 x 180
Doors height mm 2 x 360
Top length mm 1500
Drawers height mm 3 x 180
Doors height mm 1 x 540
82060
Top length mm 1500
Drawers height mm 1 x 180
Doors height mm 1 x 360
82065
Top length mm 1500
Drawers height mm 3 x 180
Doors height mm -
82067
Top length mm 2000
Drawers height mm 2 x 180
Doors height mm 2 x 360
82070
RAL 7035/6011 82055
… 501
… 601
…
82060
501
… 601
…
82065
501
… 601
…
82067
501
… 601
…
82070
501
… 601
Drawer Fittings for series 100 + 200
ß Type Made of sheet steel, galvanised. Longitudinal dividers with slotted strips on both sides. Cross dividers with bevelled edges.
82228-82229 Application For drawers cat.-no. 82218 from 01. 01, 2007. For 1/3 division per drawer 2 x 175 mm and 1 x 150 mm are necessary.
Longitudinal 540 mm across 1/4 125 mm for drawers 82224 … 82225 Front height mm 60 201 90 + 120 202 150 203 180 - 270 204
www.hhw.de
Examples for drawer fittings:
Longitudinal dividers
Cross dividers
82226 Application For drawers cat.-no. 82218 before 01. 01, 2007.
82.2
82055
82055 Type With middle divider.
Top length mm 1500
82224 - 82229
Model 105
… 201 202 203 204
across 1/3 165 mm 82226
… 201 202 203 204
across 1/3 150 mm 82228
… 301 302 303 304
across 1/3 175 mm 82229
… 301 302 303 304
across 1/2 250 mm 82227
… 201 202 203 204
eng/OP
ß
Workshop furnishings
. ß Workbenches – sheet steel design series 200 Workbenches are still indispensible in all areas of industry and trade in spite of the increasing levels of automation. Therefore, you should make sure, that the ordered workbench is suitable for all aspects of your work. The following picture shows which versions are important and availabe.
Fittings attachment block For mounting many different fittings such as connections for electricity and compressed air.
Workbench Tops Made of solid beechwood (series 200, 40 mm thick), specially glued. For almost eternal service life for highest demands. Available up to 4200 mm or with different tops, depending on the application area.
Rail Made of beechwood plywood, 14 mm thick.
Locks Perfect is centralised locking. With one key and one turn of this key, the workbench is completely locked. Doors Different heights for different storage areas. Opening radius of 180° and self-closing doors are standard.
Drawers Several front heights (30 mm grid pattern) from 60 mm 270 mm. With extra strong roller guiding. Load capacity 100 kg per drawer. Drawer stop.
Supports Welded steel square tubing 45/45/2 for best stability and rigidity.
Marking strip
Drawer fittings Corrugated rubber matting, compartment inserts, trough dividers and other dividers provided a clearly arranged drawers.
Perforated grid For easy instalment of differently sized doors or drawers.
Base frame For certain applications, wood, besides sheet steel, is very suitable.
Height compensators Recommended accessory for uneven floors and longer workbenches or workbench combinations.
Mobile version Preferable for all areas, in which mobility and a stable workplace are required.
Standard equipment
ß-convincing facts
$
Solid beechwood workbench top, original – proven and tested. Made of healthy and well-selected beechwood. Special toothed, pin-fixed and glued. Ground and impregnated. For almost unlimited service life. – Design Drawers and doors are flush with the housing. No protruding edges and corners. – Standard finish: Housing RAL 7035 light grey, Drawers/doors RAL 5012 light blue. Further finishes see colour chart, without additional cost (not in stock). – Surface load 800 kg/m2
Picture shows original $ Solid beechwood solid beechwood bench top bench top, 40 mm thick
Note: The following workbench tops are available on request: – plastic layer top, – multi-purpose top, – iron-finish sheet steel top, – top with galvanised sheet steel covering, – top with stainless steel covering V2A, – electrically conductive.
Available colours:
3002
eng/OP
5010
5012
5018
5023
6011
7032
Centralised locking
Door opening angle 180°
Extra strong roller guiding 100 kg load capacity
Drawers with perforated base, through plates
Supports square sectional steel 45/45/2 mm
Marking strip
7035
9011
www.hhw.de
82.3
8
• Workbenches 82200 - 82208
Workbenches series 200, top length 1500 mm
ß
Finish: Standard two colours. Housing RAL 7035 light grey. Drawers and doors see table! RAL 5012 light blue (standard finish) or RAL 6011 reseda green.
Type Sheet steel, height of workbench 840 mm. Base frame L x D: 1310 x 615 mm. Internal drawer dimensions W x D: 500 x 540 mm.
8
Note: Combinations of workbenches for more than one workplace and top lengths (up to 4200 mm in one piece) available on request. 82208 Type Workbench with bench vice and folding unit. Model 202 82202
Model 200
82200
Model 201
82201
Model 203
82203
Model 204
82204
Model 205
82205
Model 206
82206
Model 207
82207
Model 105 KS
82208
RAL 7035/5012 82200
Bench top size L x W x T mm 1500 x 700 x 40
drawers number of x height mm 2x180
doors number of x height mm 2x360
shelves number of -
Bench top size L x W x T mm 1500 x 700 x 40
drawers number of x height mm 1x120, 1x180, 1x240
doors number of x height mm 1x540
shelves number of 1
82201
Bench top size L x W x T mm 1500 x 700 x 40
drawers number of x height mm 6x90, 3x180
doors number of x height mm -
shelves number of -
82202
Bench top size L x W x T mm 1500 x 700 x 40
drawers number of x height mm 1x90, 3x150
doors number of x height mm 1x540
shelves number of 1
82203
Bench top size L x W x T mm 1500 x 700 x 40
drawers number of x height mm 4x90
doors number of x height mm 2x360
shelves number of -
82204
Bench top size L x W x T mm 1500 x 700 x 40
drawers number of x height mm 2x90, 5x180
doors number of x height mm -
shelves number of -
82205
Bench top size L x W x T mm 1500 x 700 x 40
drawers number of x height mm 1x180
doors number of x height mm 1x360
shelves number of -
82206
Bench top size L x W x T mm 1500 x 700 x 40
drawers number of x height mm 1x90, 3x150
doors number of x height mm -
shelves number of -
82207
Bench top size L x W x T mm 1500 x 700 x 40
drawers number of x height mm 2x180
doors number of x height mm 2x360, 1x540
shelves number of -
82208
82.4
www.hhw.de
…
RAL 7035/6011 82200
501 …
601 82201
501 …
82202
82203
82204
82205
501
… 601
82206
501 …
… 601
501 …
… 601
501 …
… 601
501 …
… 601
501 …
…
… 601
82207
… 601
… 101
eng/OP
ß
Workshop furnishings
82209 - 82219
Workbenches series 200, top length 2000 mm
ß
Finish: Standard two colours. Housing RAL 7035 light grey. Drawers and doors see table! RAL 5012 light blue (standard finish) or RAL 6011 reseda green.
Type Desk-type workbench, sheet steel, height of workbench 840 mm. Base frame L x D: 1900 x 615 mm. Internal drawer dimensions W x D: 500 x 540 mm.
Note: Combinations of workbenches for more than one workplace and top lengths (up to 4200 mm in one piece) available on request.
Model 209
82209
Model 210
82210
Model 215
82216
Model 220
82219
Models 209, 210, and 211 with 1 rear positioned centre shelf.
Model 211
82211
RAL 7035/5012 82209
Bench top size L x W x T mm 2000 x 700 x 40
drawers number of x height mm 2x180
doors number of x height mm 2x360
shelves number of -
Bench top size L x W x T mm 2000 x 700 x 40
drawers number of x height mm 6x180
doors number of x height mm -
shelves number of -
82210
Bench top size L x W x T mm 2000 x 700 x 40
drawers number of x height mm 2x90, 1x120, 1x240
doors number of x height mm 1x540
shelves number of 1
82211
Bench top size L x W x T mm 2000 x 700 x 40
drawers number of x height mm 3x180
doors number of x height mm 2x540
shelves number of 2
82216
Bench top size L x W x T mm 2000 x 700 x 40
drawers number of x height mm 3x180
doors number of x height mm 3x360
shelves number of -
82219
82213 - 82214
RAL 7035/6011 82209
…
…
501 …
601 82210
…
501 …
601 82211
…
501 …
601 82216
…
501 …
601 82219
…
501
601
Workbenches series 200, top length 750 mm
ß
Model 213
82213
Model 214
8
82214
Type Sheet steel, height of workbench 840 mm. Base frame L x D: 720 x 615 mm. Internal drawer dimensions W x D: 500 x 540 mm. Finish: Standard two colours. Housing RAL 7035 light grey. Drawers and doors see table! RAL 5012 light blue (standard finish) or RAL 6011 reseda green.
eng/OP
Bench top size L x W x T mm 750 x 700 x 40
drawers number of x height mm 1x90, 1x180, 1x270
doors number of x height mm -
shelves number of -
Bench top size L x W x T mm 750 x 700 x 40
drawers number of x height mm 1x180
doors number of x height mm 1x360
shelves number of -
RAL 7035/5012 82213
…
RAL 7035/6011 82213
501 82214
… 501
www.hhw.de
… 601
82214
… 601
82.5
• Power Supply Assemblies • Workbenches Power Supply Assemblies 1500 mm Long
82308
Note: The power supply assemblies are supplied unwired. 82308 201 Type Equipped with: 2 power sockets 230 V/50 Hz, 1 quick-action coupling for compressed air.
Colour
82308
RAL 7035 RAL 7035 RAL 7035
82308 202 Type Equipped with: 1 illuminated on/off switch, 1 power socket 230 V/50 Hz, 1 quick-action coupling for compressed air, 1 CEE power socket 16 A, 380 V/50 Hz, 5-pole. 82308 203 Type Equipped with: 2 power sockets 230 V/50 Hz, 1 overload release 1-pole L 16 A, 1 CEE power socket 16 A, 380 V/50 Hz, 5-pole.
… 201 202 203
82308 201
82308 202
82308 203
. Fittings attachment block For attaching several different fittings, made of high-quality thin sheet metal, lacquered. 1
1 2 3 4 5 6
2
3
4
5
6
7
8
9
10 11 12
illuminated on/off-switch, 2-pole, power socket with lid, 2-pole + E 10/16 A 230 V, CEE power socket with lid, 5-pole 16 A 380 V, overload release, 1-pole L 16 A, overload release, 3-pole G 16 A, screw safety element Neozed, 3-pole, without fuse,
7 8 9 10 11 12 13
13
fault current safety switch, 25 A, 30 mA, 230/380 V, emergency button with key, emergency button without key, pole clamp, 4 mm, red, pole clamp, 4 mm, black, earthing bush, 4 mm, yellow-green, quick-action coupling for compressed air.
The power supply assemblies are supplied unwired. Available lengths 750 mm/1250 mm/1500 mm/2000 mm/2800 mm and 4000 mm. Please contact us for price information. Please state position and kind of fittings when placing the order.
. Wheel systems for workbenches series 100 and 200 All HHW workbenches series 100 and 200 can be ordered with this wheel system only on the first order. With 4 steering wheels, load capacity of each 150 kg, wheel Ø 100 mm. Maximum load capacity inclusive of the own weight of the workbench 450 kg. Finish: RAL 7035 light grey.
8
With the lever on the front side of the workbench, it can be switched from rolling to standing function and vice versa. When in the standing function, the workbench securely rests on 4 supports. Please contact us for a quote.
82131
Mobile workbench with bench vice + folding unit
ß
82131
Type Solid beechwood bench top, 50 mm thick Wheel system with 4 steering wheels, wheel Ø 100 mm. Built-in bench vice, 100 mm jaw width with folding unit, 360° rotatable and adjustable in height. The bench vice compartment has a door. Drawer front heights 90, 120, 150 and 180 mm.
HxWxD mm 850 x 1140 x 700
82.6
www.hhw.de
82131
… 101
eng/OP
ß
Workshop furnishings
. Workbenches in modular systems series 200 for individual customising
Cat.-no. 82215 = workbench empty housing with workbench top and centralised locking, cat.-no. 82218 = workbench drawers with roller guiding rails, cat.-no. 82220 - 82221 = workbench doors with turning joints.
82215
Workbench Housing series 200
ß Type Sheet steel with square end tubular steel supports 45 x 45 x 2 mm, with solid original ANKE red beechwood plate, thickness 40 mm. Installation dimensions for drawers/doors 540 mm high. With centralised locking in housing, inclusive of 2 keys. Finish: RAL 7035 light grey, standard.
82215 601
82215 602
1310
720 82215 603
82215 604
Further finishes in RAL 3002, 5010, 5012, 5018, 5023, 6011, 7032 and 9011 without additional cost (not in stock).
1895
1895
Bench top sizes L x W x T mm 750 x 700 x 40 1500 x 700 x 40 2000 x 700 x 40 2000 x 700 x 40
82218
Base frame dimensions Length x Depth mm 720 x 615 1310 x 615 1895 x 615 1895 x 615
Type Drawers made of sheet steel with roller guiding and marking strip, load capacity 100 kg. With guiding slides. Width x Depth: 500 x 540 mm. Standard finish: RAL 5012.
82220 - 82221
Unit height mm 40 60 60 120 150 150
Type Doors made of sheet steel, 180° opening angle, with closing mechanism and marking strip. Standard finish: RAL 5012.
eng/OP
601 602 603 604
Application For combining workbenches of series 100 + 200 in conjunction with empty housings cat.-no. 82215.
82218
Note: The sum of the front heights should be the same as the inbuild size of the housing (540 mm).
RAL 5012 82218
… 500 501 502 503 504 505
RAL 6011 82218
8
… 600 601 602 603 604 605
Further finishes see page 82.3 without additional cost (not in stock).
Workbench Doors, series 100 + 200
ß
Height of door mm 360 360 540 540
…
Workbench Drawers, series 100 + 200
ß
Front height mm 60 90 120 150 180 240
82215
Finish RAL 5012 RAL 6011 RAL 5012 RAL 6011
Application For combining workbenches of series 100 + 200 in conjunction with empty housings cat.-no. 82215 and drawers cat.-no. 82218.
Turning joints right 82220
…
82220
82221
Turning joints left 82221 …
501 601 502 602
501 601 502 602
Further finishes see page 82.3 without additional cost (not in stock).
www.hhw.de
82.7
• Workbenches • Working tables 82222
Workbench shelves series 100 + 200
ß
82222
Application For workbenches with doors, adjustable in height (grid pattern 30:30 mm), not retractable.
Type Made of sheet steel, galvanised.
82222
… 101
82224 - 82229
Drawer Fittings for series 100 + 200
ß
Examples for drawer fittings:
82228-82229 Application For drawers cat.-no. 82218 from 01. 01, 2007. For 1/3 division per drawer 2 x 175 mm and 1 x 150 mm are necessary. Cross dividers
Type Made of sheet steel, galvanised. Longitudinal dividers with slotted strips on both sides. Cross dividers with bevelled edges.
Longitudinal dividers
82226 Application For drawers cat.-no. 82218 before 01. 01, 2007.
Longitudinal 540 mm across 1/4 125 mm for drawers 82224 … 82225 Front height mm 60 201 90 + 120 202 150 203 180 - 270 204
82230 - 82232
…
across 1/3 165 mm 82226
201 202 203 204
…
across 1/3 150 mm 82228
201 202 203 204
301 302 303 304
82230 Trough dividers Made of plastics. With 10 dividers, for front heights starting at 90 mm.
82232 Corrogated rubber insert Black, noise damping and material-friendly, for all front height.
82231 Moulded compartments Made of plastics, for front heights starting at 90 mm.
Trough divider 82230 5 trays 6 trays
8
Number of support pairs 2 2 3
301 302 303 304
across 1/2 250 mm 82227
… 201 202 203 204
Compartment divider 82231
82230 101
82230 102
82231
82232
corrugated rubber insert … 82232 … 101
101
Surface load 800 kg/m2. Finish: RAL 7035 light grey, standard.
82250 603
Note: Fully assembled. Drawer see cat.-no. 82252.
Number of possible drawers 2 3 4
82250
… 601 602 603
Further finishes in RAL 3002, 5010, 5012, 5018, 5023, 6011, 7032 and 9011 without additional cost (not in stock).
Drawers, series 200
ß Type Made of sheet steel with roller guiding. Load capacity 50 kg. With cylinder lock.
Internal drawer dimensions H x W x D mm 150 x 500 x 540
82.8
…
Worktables, series 200
Type Workbench top original ANKE solid red beechwood. Length x Width x Thickness 1500/2000/2800 x 700 x 40 mm with flanged edge, 90 mm high. With sturdy base frame made of square end tubular steel 45/45/2 mm. Absolutely secure stand, even when using a bench vice. Height of workbench 840 mm.
82252
… 101 102
ß
Top length mm 1500 2000 2800
across 1/3 175 mm 82229
Drawer Divider Assortments for series 100 + 200
ß
82250
…
www.hhw.de
Standard finish: RAL 5012. Application For working tables series 200, cat.-no. 82250.
RAL 5012 82252
… 501
RAL 6011 82252
82252
…
Further finishes in RAL 3002, 5010, 5018, 5023, 6011, 7032 and 9011 without additional cost (not in stock).
601
eng/OP
ß 82255
Workshop furnishings Height Compensators, series 100 + 200
ß Type Made of shock-proof and wear-resistant material, especially for uneven floors.
Adjustment range mm 15
82290 - 82295
82255
Application For all workbenches and worktables of series 100 and/ or 200, with square end tubular steel supports 45/45/2 mm.
82255
… 101
Hexagonal Workbenches for Work Groups
ß Type 1. Workbench Top 40 or 50 mm thick, warp-proof made of beechwood Multiplex, waterproof glued, or solid beechwood. Supplied in 2 elements, slot and tongue fitting and Lamello screw fitting.
Fittings attachment block available on request
2. Tool cabinet 800 x 545 x 600 mm, made of stable sheet steel, centralised locking, drawers ball-bearing mounted, 60 kg capacity, 85% extension. Drawer stop, inside with slotted strips and perforated base for individual fitting. Useful space and fitting material see cat.-no. 82345. Space between the cabinets is covered by sheet metals. Overall height of the workbench, without fittings attachment block, 840 mm at 40 mm workbench top and 850 mm at 50 mm workbench top. Effective area of the drawers 447 x 523 mm (W x D). Standard finish: Housing RAL 7035 light grey, drawers RAL 5012 light blue, powder-coated. Not assembled. 82290 Type 6 tool cabinets with 6 drawers each, front height 1 x 60, 3 x 90 1 x 180 mm and 1 x 210 mm, per workplace.
1250
This workbench configuration offers the possibility to create workplaces in training centres effectively.
One workbench covers 6 workplaces. 850
800 2500
82290
82295
82295 Type 6 tool cabinets with 2 drawers each, front height 1 x 60, 1 x 90 mm and 1 door 570 mm, per workplace. Note: Other combinations, tool cabinets with 100% extension, octagonal designs, and fittings attachment blocks available on request.
8
Further finishes in RAL 3020, 5010 and 7016 without additional cost. Workbench Top
Cabinet with 6 drawers
Hexagonal workbench with Workbench top Beechwood Multiplex 40 mm Beechwood Multiplex 50 mm Beechwood solid 40 mm Beechwood solid 50 mm
eng/OP
RAL 7035/5012 82290
… 505 506 507 508
RAL 7035/5012 82295
Cabinet with 2 drawers and 1 door
… 505 506 507 508
RAL 7035/6011 82290
…
RAL 7035/6011 82295
605 606 607 608
www.hhw.de
… 605 606 607 608
82.9
• Workbenches • Tool cabinets 82300
System Workplace
ß
Note: Not assembled, easy assembly.
Top length mm 1500
82310 - 82312
82300
Finish: Housing/support RAL 7035 light grey, drawers RAL 5012 light blue, powder-coated.
Type Workbench top beechwood Multiplex 1500 x 700 mm, 40 mm thick. Support made of stable square pipe 45 x 45 x 2 mm, 800 mm high. Tool cabinet with 6 ball-bearing mounted drawers. Drawer front height 1 x 60, 2 x 90, 2 x 150, 1 x 180 mm. Height of workbench 840 mm.
82300
… 502
Workbench Tops
82310 Type Multiplex workbench top made of multi-layer, waterproof glued beechwood, with even strength in longitudinal and transversal direction. 82311 Type Solid beechwood top, proven and tested, made of selected solid red beechwood. Specially glued and pin-fixed. Ground and oiled. Can be sanded and has an extremely long service life.
82312 Type Multi-purpose top. Grey blue, anti-static, wear-resistant top layer. Short-term resistance against light acids and alkalines and heat up to approx. 250°C. Long-term resistance against fats and oils. With solid wood edge band.
82310
82311
Note: Beechwood tops up to a length of 4,20 m available on request. Further dimensions available on request.
Multiplex 82310
Bench top size L x W x T mm 1500 x 700 x 40 1500 x 700 x 50 1500 x 750 x 40 2000 x 700 x 40 2000 x 700 x 50 2000 x 750 x 40 2500 x 700 x 40 2500 x 700 x 50 2500 x 750 x 40 3000 x 700 x 40 3000 x 700 x 50
8
82217
…
beechwood 82311
…
multi-purpose 82312
… 82312
401 404 407 402 405 408 403 406 409
101 201
101 102
102 202
103 104
103 203 104 204
Flanged Edges
Type Beechwood multi-layered wood, oiled. Overall height 90 mm, 50 mm excess length of plate. 14 mm thick.
Length mm 1500 2000
82315
82217
82217
… 101 102
Workbench Support
ß 82315
Type Made of stable U-sectional steel profile 80 x 50 x 2 mm. Standard finish: RAL 7035 light grey, powder-coated.
HxD mm 800 x 600
82.10
www.hhw.de
82315
… 602
eng/OP
ß 82316
Workshop furnishings Cross Strut
ß Type Made of sheet steel, lacquered, incl. of assembly material. Adjustable.
Application For stabilizing modular worktables. For worktables with a width of 1500 and 2000 mm.
Width mm 1500 - 2000
82316
82318
Workbench supports, adjustable in height
Type Made of stable U-sectional steel profile 80 x 50 x 2 mm. Adjustable in increments of 25 mm. With screw connection.
Standard finish: RAL 7035 light grey, powder-coated.
HxD mm 600 - 950 x 600
Vice Cupboard for Vice Folding Unit (Empty)
82320
… 602
Drawers
ß Type Sheet steel housing, drawer lockable. Internal drawer dimensions W x D 448 x 523 mm. Front height 140 mm. Useable height 130 mm. Load capacity 80 kg. With slotted rails and perforated base for dividers, cylinder lock with 2 keys.
Standard finish: RAL 7035/5012 powder-coated.
RAL 7035/5012 82325
Dimensions H x W x D mm 150 x 557 x 600
…
82325
RAL 7035/6011 82325
502
…
8
602
Tool Cabinets, Empty Housings
ß Type Centralised locking and drawer stop. Housing made of sheet steel, built-in cross section bars take the slides and provide maximum stability. Base area 557 x 600 mm. Without drawers (see cat.-no. 82330). Drawers with different front heights can be used. Standard finish: RAL 7035 light grey, powder-coated.
eng/OP
82320
Note: Bench vices Brockhaus Heuer see cat.-no. 53632 and 53633. Folding and height adjustment units see cat.-no. 53650.
External dimensions H x W x D mm 800 x 300 x 600
External dimensions H x W x D mm 380 x 557 x 600 470 x 557 x 600 650 x 557 x 600 800 x 557 x 600
… 602
Type Made of sheet steel. Standard finish: RAL 7035 light grey, powder-coated. Scope of supply: without bench vice and height adjustment unit.
82328
82318
82318
ß
82325
… 201
ß
82320
82316
Note: The sum of the drawer front heights must be the same as the useable height of the housing.
82328
Further finishes in RAL 3003, 5010, 7016, 5012 and 6011 without additional cost (not in stock).
useable housing height mm 300 390 570 720
82328
… 701 702 703 704
www.hhw.de
82.11
• Tool cabinets Drawers
82330
ß
Note: Drawers with 100% extension available on request. Drawer fittings see cat.-no. 82345.
Type Made of sheet steel, roller bearing slides, complete with sliding bars. 85% extension, 60 kg load capacity, perforated base, side walls with slotted rails, internal drawer dimensions W x T 447 x 523 mm. Standard finish: RAL 5012 light blue, powder-coated.
Front Useable height mm mm 60 40 90 70 120 100 150 130
82335
Unit height mm 40 70 100 100
82330
Further finishes in RAL 3020, 5010 and 7016 without additional cost (not in stock).
RAL 5012 82330
…
RAL 6011 82330
701 702 703 704
…
Front Useable height mm mm 180 160 240 220 300 280
801 802 803 804
Unit height mm 130 130 130
RAL 5012 82330
…
RAL 6011 82330
705 706 707
… 805 806 807
Tool Cabinets
ß Type Supplied with ball-bearing mounted drawers. Standard finish: Housing RAL 7035, drawers RAL 5012, powdercoated.
82335 Further finishes in RAL 3020, 5010 and 7016 without additional cost (not in stock).
Note: Detailed description see cat.-no. 82328 empty housing and cat.-no. 82330 drawers. Wheel system for tool cabinets see cat.-no. 82356. Tool cabinets H 380 - 655 can be mounted underneath a workbench top.
8
Housing height mm 380 380 380 380 470 470 470 470 650 650 650 650 650 800 800 800 800 800
82340
drawers front height mm 60 90 120 150 – – – 2x – – 1x – – 2x 1x – 2x 2x – – – – – 1x – 1x 1x 2x – 1x 1x 4x – – 1x – – – 1x – 1x 1x – – 3x 1x – 2x 3x – – 5x 1x – – – 2x – – 2x – 1x – 1x 2x – 2x 2x 4x – – 2x 4x 2x –
Type Supplied with ball-bearing mounted drawers. Doors reinforced, door opening left, strong hinges, lockable with cylinder lock, 2 keys. Standard finish: Housing RAL 7035, drawers and doors RAL 5012, powder-coated.
82.12
240 – – – – 1x – – – 1x – – – – 1x – – 1x –
300 – – – – – – – – – – – – – 1x 1x – – –
…
RAL 7035/6011 82335
701 702 703 704 711 712 713 714 721 722 723 724 725 731 732 733 734 735
… 801 802 803 804 811 812 813 814 821 822 823 824 825 831 832 833 834 835
Tool Cabinets with Doors
ß
Dimensions H x W x D mm 470 x 240 x 600 470 x 557 x 600 650 x 557 x 600 800 x 557 x 600 650 x 557 x 600 800 x 557 x 600
180 – 1x – – – 1x – – 1x 2x 1x 1x 1x – 1x 1x – –
RAL 7035/5012 82335
drawers number of 2 2 3 4 2 3 4 5 3 4 5 6 7 4 5 6 7 8
drawers front height mm 60 90 120 – – – – – – – – 1x – – 1x – 1x 1x 1x – 1x
www.hhw.de
Note: Detailed description see cat.-no. 82328 empty housing and cat.-no. 82330 drawers.
82340 703
Note: Cat.-no. 82340 701+801 utensils cabinet width 240 mm.
RAL 7035/5012 82340
… 701 702 703 704 710 712
RAL 7035/6011 82340
… 801 802 803 804 810 812
Further finishes in RAL 3020, 5010 and 7016 without additional cost (not in stock).
eng/OP
ß
Workshop furnishings Base plinths for tool cabinets
82342
ß Type Finish: RAL 7035 light grey, powder-coated. Application For tool cabinets cat.-no. 82328, 82335 and 82340.
Quality sheet steel.
82342 603
82342 604
HxWxD mm 50 x 557 x 600 100 x 557 x 600
82342
… 603 604
Drawer Fittings
82345
ß Type Through plates made of sheet steel, powder-coated, compartment dividers made of galvanised sheet steel, edges rounded.
Fitting 1/2 1/3 1/4 1/2 1/3 1/4
82354
Slotted rails 1 2 3 1 2 3
Dividers dividers 6 9 12 6 9 12
For drawers height mm 90 90 90 120 /150 120 /150 120 /150
82345
… 201 202 203 204 205 206
Corrugated Rubber Covering 82354
WxT mm 545 x 600
82356
82354
… 201
Wheel system
ß Type With 2 steering wheels Ø 100 mm with stop lock and 2 support rollers. Welded steel. Load capacity approx. 300 kg. Finish: RAL 7035 light grey.
82356
Application With this device, the tool cabinets cat.-no. 82335 and 82340 become tool carts.
HxWxD mm 120 x 557 x 600
82356
8
… 201
Workshop furnishings Everything from one source. We customize your workshop using CAD technology.
Need some advice? Contact us:
[email protected]
eng/OP
www.hhw.de
82.13
• Working tables • Bench trolleys
. Adjustable working tables type WB U The working height can be adjusted by means of Allen screws, hand crank or electric motor almost noiseless between 700 and 1100 mm. Speed of the electric motor 19 mm/s. The height adjustment is made possible by a sturdy gliding frame made of aluminium. Base frame powder-coated steel construction RAL 7035, with compensation supports. Table top 25 mm, melamine-coated on both sides, dazzle-free ecru white.
Please send us your enquiry. Adjustable working table for standing or sitting work
Multi-purpose accessories at your disposal
. Industrial furniture cat.-no. 82360-82366 U Example:
8
1 2 3 4 5 6
82.14
workbench with upper shelf cable channel bin shelf extra shelf lighting unit additional frame
www.hhw.de
Cat.-no. 82363 82366 901-903 82366 101-103 82366 301-302 82366 701 82366 601-603
7 bench trolley 8 extension table 9 visible storage cabinet 10 swivel chair 11 stacking bins 12 drawer unit 13 footrest
82364 - 82365 82362 83010 82434 cont. 83150 optional optional
eng/OP
ß 82360 - 82362
Workshop furnishings Workbench Systems
U Type Base frame made of steel RAL 7045 powder-coated. Table top 25 mm, melamine-coated on both sides, dazzle-free ecru white. Height adjustment with hexagon socket from 650900 mm. Application Universal workbenches for light-duty assembly work, multi-purpose and flexible applications. Note: ESD workplaces for the electronic industry available on request.
82360
82360 Basic workbench TP.
82362 82361 Extension table TPG, straight. Application For extension of cat.-no. 82360. 82362 Angle extension table. Application For working tables cat.-no. 82360 + 82361.
Basic workbench Dimensions of table top load capacity/ 82360 … Type L x W mm table top approx. kg TP 507 700 x 500 150 101 TP 510 1000 x 500 150 102 TP 515 1500 x 500 150 103 TP 710 1000 x 700 300 104 TP 712 1200 x 700 300 105 TP 715 1500 x 700 300 106 TP 718 1800 x 700 300 107 TP 915 1500 x 900 300 108 TP 918 1800 x 900 300 109
82363
Type Base frame made of steel RAL 7045 powder-coated. Table top 25 mm, melamine-coated on both sides, dazzle-free ecru white. Height adjustment from 650900 mm. Load capacity of shelf approx. 50 kg, adjustable in height from 1080-1550 mm.
TPH 712 TPH 715 TPH 718 TPH 915 TPH 918
Dimensions of table top L x W mm 1200 x 700 1500 x 700 1800 x 700 1500 x 900 1800 x 900
82364 - 82365
load capacity/ table top approx. kg 150 150 150 150 150
82361
Extension table Dim. of table top angled version L x W mm TPW 510 1000 x 500 TPW 712 1200 x 700
load capacity/ table top approx. kg 150 150
82362
Upper shelf L x W mm 1200 x 310 1500 x 310 1800 x 310 1500 x 310 1800 x 310
101 102 103 104 105
82364 Bench Trolleys SAP Type Base frame made of steel RAL 7045 powder-coated. Table top 25 mm, melamine-coated on both sides. With four steering wheels Ø 100 mm, two of them with stop lock. Height adjustment with hexagon socket from 650-900 mm.
Note: Accessories see cat.-no. 82366.
eng/OP
101 102
load capacity/ table top approx. kg 300 300 300 300 300
82363
82363
… 101 102 103 104 105
82365 Lower shelf
8
82364 + 82365
Note: Lower shelf must be ordered separately.
507 710 715
…
Table Trolleys
U
Type
…
Workbenches with Upper Shelves
U
Type
Extension table Dim. of table top straight version L x W mm TPG 712 1200 x 700 TPG 715 1500 x 700 TPG 718 1800 x 700 TPG 915 1500 x 900 TPG 918 1800 x 900
Dimensions of table top load capacity/ L x W mm table top approx. kg 700 x 500 150 1000 x 700 150 1500 x 700 150
82365
Bench trolley 82364
… 101 102 103
Lower shelf 82365
… 101 102
www.hhw.de
82.15
• Working tables • Multi-Purpose System 82366
Accessories for working tables cat.-no. 82363 (empty)
U Application For the ergonomic and individual configuration of the workplaces with the modular system. The accessories are mounted on the vertical profile of the workbenches type TPH. Note: Further accessories e.g. overload release, fault current safety switch, emergency button and compressed air connection 3/8 inch available on request. 82366 101-103 Bin Shelfs Type Sheet steel grey, powder-coated. Inclination and height infinitely adjustable. Load capacity 30 kg. Application For stacking bins and picking bins. 82366 201-202 Bin rail Type Sheet steel grey, powder-coated. Application For mounting stacking bins and picking bins. Mounting between the height adjustment profiles of the upper shelf.
82366 701 Overlight Type Dazzle-free, powerful and energy-saving universal light length approx. 1372 mm, with 2 fluorescent tubes of 54 Watt each. Chrome-plated grid, frame made of aluminium. With 3 m power cable and on/off-switch. Mounted on addition cat.-no. 82366 601-603. Protection rating IP 20.
82366 301-302 Extra shelf Type Table top melamine-coated, thickness 25 mm. 82366 401-403 Perforated panel Type Sheet steel RAL 7038, grey powder-coated. Holes 9 x 9 mm grid pattern 38 mm.
82366 801-802 Extra rail Type Steel profile 35 x 35 mm. Application For tool support.
82366 501 Assembly kit Application For mounting the perforated panel. 82366 601-603 Tool support Type Two welded angled profiles 590 x 550 mm and one rail. Application For mounting of lights or tools.
82366 901-903 Cable channel Type With 3 m power cable, double power socket and on/off-switch. Housing made of aluminium. Dimensions H x D mm 135 x 62. In compliance with IEC norms.
82366 102
82366 201
82366 401
82366 601
82366 301
82366 701
8
82366 901
Bin shelf Bin shelf Bin shelf Bin rail Bin rail Extra shelf Extra shelf Perforated panel Perforated panel Perforated panel
82.16
Type dimensions suitable for 82366 … mm table top length mm TH 120 1119 x 145 1200 101 TH 150 1419 x 145 1500 102 TH 180 1719 x 145 1800 103 BP 150 1155 1500 201 BP 180 1455 1800 202 SH 150 1500 x 310 1500 301 SH 180 1800 x 310 1800 302 RL 120 1119 x 750 1200 401 RL 150 1419 x 750 1500 402 RL 180 1719 x 750 1800 403
www.hhw.de
set of holders (4 pcs.) additional frame additional frame additional frame illumination additional rail additional rail cable channel cable channel cable channel
Type dimensions suitable for 82366 … mm table top length mm RLK – – 501 KT 120 – 1200 601 KT 150 – 1500 602 KT 180 – 1800 603 OL 254 2 x 54 Watt 1500/1800 701 SPR 150 1500 – 801 SPR 180 1800 – 802 TJK 120 1060 1200 901 TJK 150 1360 1500 902 TJK 180 1660 1800 903
eng/OP
ß
Workshop furnishings
. The Multi-Purpose System Suitable for any kind of workplace, e.g. in development, production, application in the field, dispatch, etc. Thanks to the modular design, existing workplace systems or workbenches can be customised or retrofitted. The extensive line of accessories ensures an unlimited number of combinations. 6
5
1 2 3 10
8 9
7 4
82372
Type Thanks to the modular design, existing workplace systems or workbenches can be customised or retrofitted. The extensive line of accessories ensures an unlimited number of combinations. Finish RAL 7035 light grey. Application Suitable for any kind of workplace, e.g. in development, production, application in the field, dispatch.
82372 602 Type 12-part: 2 mounting rails 1250 mm, 1 power rail with 4 earthed sockets, 1 magnetic panel, 1 perforated panel, 2 shelves 320 mm, 1 top support, 2 rails, 1 overlight 2 x 30 W, 1 carriage. Application For mounting on workbenches min. 1500 mm wide and min. 40 mm thick.
Note: Workbenches, decoration, storage bins and hooks not included. Detailed description see cat.-no. 82370.
82372 603 Type 7-part: 2 mounting rails 1250 mm, 1 perforated panel, 1 shelf 320 mm, 1 top support, 1 rail, 1 overlight 2 x 30 W. Application For mounting on workbenches min. 1500 mm wide and min. 40 mm thick.
82372 602
Version 16-part 12-part 7-part 12-part
82370 101-104 82370 105-110 82370 122 82370 118-119 82370 111-117 82370 123-125 82370 128-129 82370 127 82370 126 82370 120-121
Multi-Purpose System (Sets)
82372 601 Type 16-part: 2 mounting rails 1250 mm, 1 power rail with 4 earthed sockets, 1 magnetic panel, 1 perforated panel, 2 swivelling arm holders, 1 support plate, 1 keyboard and monitor shelf, 2 shelves 320 mm, 1 top support, 2 rails, 1 overlight 2 x 30 W, 1 carriage. Application For mounting on workbenches min. 1500 mm wide and min. 40 mm thick.
eng/OP
Cat.-no.
1 Mounting rails 2 shelves 3 support rail for storage bins 4 power rails 5 Top support 6 illumination 7 multi-purpose holder 8 Support plate 600 x 350 mm 9 keyboard and monitor shelf 10 Magnet and perforated panel
82372 604 Type 12-part: 3 mounting rails 1250 mm, 1 power rail with 3 earthed sockets, 1 perforated panel, 2 shelves 220 and 320 mm, 1 top support, 2 rails, 1 overlight 2 x 36 W, 1 multi-purpose cabinet with roll front H 820 x B 910 x T 210 mm. Application For mounting on workbenches min. 2000 mm wide and min. 40 mm thick.
82372 601
82372 603
82372 604
HxWxD mm 1250 x 1500 x 60 1250 x 1500 x 60 1250 x 1500 x 60 1250 x 2000 x 60
82372
… 601 602 603 604
www.hhw.de
82.17
8
• Multi-Purpose System • Floor matting Multi-Purpose System (Components)
82370
82370 101-104 Mounting rails Type 30 x 60 mm, reinforced with a U-profile tube. Application Suitable for mounting on workbench tops with a thickness of 40 mm and more. Mounting rails for less thick workbench tops available on request. For 2 m of working area, 3 mounting rails are required. 82370 105-110 Shelves Type Inclination and height adjustable. Inclination 0, 10 and 20 degrees incl. of flanged edge. Application For mounting between the mounting rails. For 2 m bases, 2 x 1000 mm shelves are required.
82370 111-117 Top support and accessories Type With screwed in reinforcements. The rail is mounted underneath and can support the carriage, the illumination or a spring. 82370 120-121 + 135-136 Perforated and magnetic panels Type Height 302 mm. Application For mounting between the mounting rails. 82370 137 Work lamp Type With connecting cable 2,9 m and plug. A mounting rail is required to mount the lamp.
82370 127 Support plate Type A holder for the swivelling arm is required in order to mount it to the mounting rail (cat.-no. 82370 129). 82370 128 Multi-purpose holder Application For illumination.
82370 105-110
82370 111-112
82370 118-119
82370 120
82370 121
82370 122
82370 137
82370 125
82370 126
82370 127
82370 128
82370 129
Designation Mounting rail Mounting rail Mounting rail Mounting rail shelf shelf shelf shelf shelf shelf Top support Top support Top support rail rail rail rollers power rail power rail perforated panel magnetic panel perforated panel magnetic panel support rail Overlight Lighting unit keyboard and monitor shelf Support plate multi-purpose holder Holder for swivelling arm
82.18
82370 126 Shelf for keyboard and monitor Type A holder for the swivelling arm is required in order to mount it to the mounting rail (cat.-no. 82370 129).
82370 129 Swivelling arm holder Application For support plate and keyboard and monitor shelf.
82370 101-104
8
82370 125 Overlight Type A multi-purpose holder is required to mount the lamp.
www.hhw.de
82370 113
Description 950 mm, right, incl. of fastening material 1250 mm, right, incl. of fastening material 950 mm, left, incl. of fastening material 1250 mm, left, incl. of fastening material W x D 1000 x 220 mm W x D 1000 x 320 mm W x D 1000 x 420 mm W x D 1500 x 220 mm W x D 1500 x 320 mm W x D 1500 x 420 mm width 1000 mm width 1500 mm width 2000 mm 30 x 30 mm, length 1000 mm 30 x 30 mm, length 1500 mm 30 x 30 mm, length 2000 mm for rails 1000 x 70 x 130 mm, not wired, with 4 earthed outlets 1500 x 70 x 130 mm, not wired, with 4 earthed outlets 1000 x 302 x 12 mm 1000 x 302 x 12 mm 1500 x 302 x 12 mm 1500 x 302 x 12 mm length 450 mm for mounting storage bins on the perforated panel 2 x 36 W – 1100 Lx, 898 x 135 x 60 mm 11 W (Multi-purpose holder is required to mount the unit on the vertical mounting rail) For monitor and keyboard, with swivelling arm 600 x 350 mm, load capacity max. 25 kg with swivelling arm -
82370 114-116
82370
… 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 135 136 122 137 125 126 127 128 129
eng/OP
ß 82405
Workshop furnishings Safety Wooden Floor Matting
Type With anti-slip system. Solid beechwood, anti-slip, can be rolled up, flexible, insulating and maintenance-free. Wooden strips artificially dried, warp-proof and tension-free. Good damp protection. Rubber supports resistant against petrol and oil. Steel tension ropes made of stainless steel. For highest demands when it comes to occupational medicine and safety. Strip width 80 mm, matting height 35 mm, With rubber supports, 2 rows, 800 mm width, 3 rows 1000 mm width.
82405 101-104 With ramp wedges on the short sides and bevelled edge on long side.
82405 101-104
82405 201-204
82405 201-204 Without ramp wedges on the short sides and without bevelled edge on long side.
– step-safe – flexible – insulating – maintenance-free – 5-year warranty – elastic – long service life – good damping
Anti-slip Rating group
Displacement Rating group
Ramps
Dimensions L x W mm 1500 x 800 2000 x 800 1500 x 1000 2000 x 1000
82410 - 82412
82405
Floor matting 82410
eng/OP
201 202 203 204
Bevelling
82410 Floor matting Type 1200 x 600 x 25 mm, Surface load capacity: 400 kg/dm2.
82410
82411 Ramp wedges, 600 x 112 mm. 82411
82412
82412 Corner pieces, 112 x 112 mm.
… 101 102
Ramps 82411
…
Corner pieces 82412
101 102
8
… 101 102
Floor Matting
Type Made of rubber, black, thickness 14 mm, non-slipping, resistant to deformation, insulating against the cold, reduces noise and vibrations. Circumferential edges bevelled. Resistant against oil and many chemicals. Application Can be used in almost all types of businesses, in dry or humid areas.
Dimensions L x W mm 780 x 710
…
Plastic Floor Matting
green orange
82414
82405
101 102 103 104
Type Plastic floor matting provides non-slip, resilient cushioning for standing and walking in front of machinery and workbenches, keeps feet warm, weather-proof, largely chemical- and pressure-resistant, hygienic - simply wash down to clean, easily relaid by simple plug-in connection; recesses can be made by using a sharp knife or saw, stumble-proof edges. Application Protection against cold and wet floors, in workshop and production. Also for use in wet facilities, showers, changing rooms, wash halls, laboratories, etc.
Colour
…
Note: Centre pieces (dovetail) available on request.
82414
82414
… 101
www.hhw.de
82.19
• Floor matting 82415
Nitrile Floor Matting
Type Made of nitrile rubber NBR, black, thickness 14 mm, flattened naps 4 mm high, non-slipping, true to shape, edges bevelled. Resistant against oil and many chemicals. Temperature-resistant from -15°C - +80°C, shortterm temperature resistance up to 600°C. Application Can be used in almost all types of businesses, in dry or humid areas.
Note: Anti-static/electrically conducting or B1 flame-resistant in compliance with DIN 4102-B1 or smooth (without naps) available on request.
Dimensions L x W mm 900 x 600 1200 x 900 1800 x 900
82416 - 82417
82415
Sunnex Matting System
Description
Type
Basic set Corner Centre piece Edge Corner Centre piece Extension Extension
A+B+A A B C D E F G
82426
82417 Sunnex matting, single pieces.
Basis set
(1) = Standard pieces, (2) = Example.
82416
…
82417
…
101 101 102 103 104 105 106 107
Floor matting Orthomat Ribbed grey
Type Single-layer anti-fatigue matting, made of 100% PVC (closed-cell material), tread plate design. Nonslip design. Application Dampening design reduces the negative effects of long periods of standing and improves blood circulation. Perfect for all dry workplaces such as in production, assembly, picking.
82.20
82416 Sunnex matting, basic set.
dimensions L x W mm 1500 x 750 750 x 375 750 x 750 750 x 750 750 x 750 750 x 750 750 x 375 750 x 175
5
Dimensions mm 600 x 900 900 x 1500
… 201 202 203
The Sunnex matting system was developed in order to reduce pains coming from standing up for a long time. Ergonomics at the workplace is a very important factor, for both the health of the work force and productivity. Type The matting is made of flexible nitrile rubber according to the air-cushion principle. They are especially resistant against wear, cleaning detergents, cutting oil and hot chips, they are anti slip, noise damping and heat insulating as well as shock damping. The closed surface and the high friction coefficient at the floor ensure that dirt is not easily absorbed and that the matting can be cleaned easily. The bevelled edge can be rode over by forklifts and other mobile transport devices. The basis of the matting system consists of three parts: the centre piece (B) and two outer pieces (A). They are connected safely and securely with dovetail couplings. No tools are needed for the assembly. Application Work is less tiring and muscles and joints of feet, legs and particularly the back ache less thanks to the Sunnex matting system.
8
82415
thickness of material mm 9 9
www.hhw.de
Note: Further dimensions available on request, in running meters.
82426
82426
… 101 102
eng/OP
ß 82427
Workshop furnishings Floor matting Ramp Mat black
5
Type Economical anti-fatigue matting made of sturdy SBR rubber. Raised surface for better non-slip characteristics. Bevelled edges all-around. Anti-slip characteristics R10 in compliance with EN 13552.
Dimensions mm 900 x 1500
82428
82427
… 101
Floor matting Safety Deckplate
Type Single-layer anti-fatigue matting, made of 100% PVC (closed-cell material), tread plate design. With yellow edges for safety reasons. Application Dampening design reduces the negative effects of long periods of standing and improves blood circulation. Perfect for all dry workplaces such as in production, assembly, picking.
82420 - 82425
82427
thickness of material mm 14
5
Dimensions mm 600 x 900 900 x 1500
Application Suitable for wet areas.
82428
Note: Further dimensions available on request, in running meters.
thickness of material mm 9 9
82428
… 101 102
Anti-slip matting -BLACK-CAT-
Type -BLACK-CAT- was developed following the latest results in working safety research. Anti-slip matting sticks to floors, without adhesion, almost in any position and on nearly all materials. Made of raw materials, without having any restricted contains by food law, can be washed up to a temperature of 60°, just lay out for drying. Form can be cut accurately by using scissors, extremely wear-resistant. Temperature-resistant from -25°C - +50°C. Colour: black.
82420
Application -BLACK-CAT-, a multi-purpose product, suitable e.g. for: tool carts, workbenches, tool boxes, tool trays on machines, car boots, caravans, conveyor belts, drawers. As non-slip surface when planing, drilling, grinding, sawing, filing etc. Note: Other matting dimensions, 20 m rolls or rolls with special dimensions are available on request.
Dimensions L x W x T mm 1200 x 600 x 4 1200 x 900 x 4 10000 x 500 x 4 10000 x 600 x 4 10000 x 1000 x 4
Matting 82420
…
10 m roll 82425
82425
8 …
101 102 110 111 112
Workshop furnishings Everything from one source. We customize your workshop using CAD technology.
Need some advice? Contact us:
[email protected]
eng/OP
www.hhw.de
82.21
• Stool • Swivel stool 82430 - 82431
Workshop Stools 82431 Workshop Swivel Stool Type With height adjustment by covered spindle, with double spindle guide, round wooden seat 350 mm Ø. Seat height 450 - 570 mm. Made in compliance with DIN 68877.
82430 Workshop Stools Type 4-legged stool, stable, frame made of moulded strip steel, round seat made of plywood 350 mm Ø, laminated glued and natural finish. Seat height 500 mm. Made in compliance with DIN 68877.
Stool 82430
…
Swivel stool 82431
Artificial leather Structural foam
82437 - 82440
82433 101 Type Top artificial leather, washable, soft, comfortable. Extra edge protection.
82433 301
seat height approx. mm 460 - 630 460 - 630
82433 301 Type Top structural foam, robust, washable, tough.
seat Ø mm 400 350
wheels
82433
x x
… 101 301
Swivel chairs DIN 68877 Fit Special 82437 Type Top laminated beechwood, washable, robust, tough.
Type - With Permanent-Kontakt technology. - Foot rest made of high-quality sectional steel tubing. Very flat design. - Seat height adjustable by means of safety gas spring. - Back rest inclination easily and infinitely adjustable. Lockable in any position. - Back rest automatically adjusts to the sitting position. - Back rest is infinitely adjustable in height. - Ergonomically-shaped back rest with good lumbar support. - Gas spring is covered in order to protect it from dust and dirt. - 5-year warranty.
8
82433 101
101
Swivel stools
Type - Foot rest made of high-quality sectional steel tubing. - seat height adjustable by means of safety gas spring. - easy-to-operate all-around handle under the seat. - large seat base. - With wheels with load-dependend brakes for hard floors. Sturdy and stable.
Top
82431
…
201
82433
82430
82437 101
82438 102
82439 102
82440 403
82438 Type Top artificial leather, washable, soft, comfortable. 82439 Type Top cloth, breathable, soft, comfortable. 82440 Type Top structural foam, robust, washable, resistant against mechanical load.
Optionally available with: - Floor caps: Large wear-resistant floor caps. Sturdy and stable. - Wheels: With wheels with load-dependend brakes for hard floors. - Foot rest: High version with foot rest. Adjustable in height, chrome-plated. Note: Suitable arm rests see cat.-no. 82444 201. 82437 102
82437 103
seat height mm 430 - 600 430 - 600 590 - 910
82.22
82438 101
82438 103
floor caps
wheels
foot rest
x x
x -
x
www.hhw.de
82439 101
beechwood 82437
82439 103
… 101 102 103
leather 82438
82440 401
… 101 102 103
cloth 82439
82440 402
… 101 102 103
foam 82440
… 401 402 403
eng/OP
ß 82444
Workshop furnishings Arm rests for swivel chairs Fit Special 82444
Type Pairs. Application For swivel chair Fit Special, cat.-no. 82437 - 82440.
82444
… 201
82442
Swivel chairs DIN 68877 Sintec
Type - With Permanent-Kontakt technology. - Exchangeable cushion made of cloth or polyurethane foam. Can be mounted retroactively. - Seat base is designed following the current ergonomical know-how, the back rest promotes a healthy sitting position. - Permanentkontakt: Back rest permanently adjusts to the sitting position. - Back rest infinitely adjustable in height with integrated height-adjustment scale. - Foot rest made of high-quality sectional steel tubing. Very flat design. - 5-year warranty.
82442 102 Type Top plastics, washable, robust, tough. With wheels with load-dependend brakes for hard floors.
82442 103
82442 102 82442 103 Type Top plastics, washable, robust, tough. High version with adjustable-in-height step, which can be folded away if necessary. Large wear-resistant floor caps. Sturdy and stable.
Note: Suitable exchangeable cushions and arm rests see cat.-no. 82443 201-203.
Top plastics plastics
seat height mm 430 - 580 580 - 850
82443
seat mm 480 x 430 480 x 430
back rest mm 420 x 430 420 x 430
foot rest Ø mm 680 680
floor caps
wheels
step
x
x -
x
82442
… 102 103
Exchangeable cushions and Arm rests for swivel chairs Sintec
Application For swivel chair Sintec, cat.-no. 82442 102-103.
82443 203 Arm rests Type Arm rests, in pairs.
82443 201
82443 202
82443 201 Exchangeable cushion Type Fabric cushion. Breathable, soft, comfortable. Colour: black. 82443 202 Exchangeable cushion Type Structural foam. Robust, washable, tough. Colour: blue.
Type Exchangeable cushions Exchangeable cushions Arm rests
fabric cushion structural foam in pairs
82443 203
82443
… 201 202 203
Workshop furnishings Everything from one source. We customize your workshop using CAD technology.
Need some advice? Contact us:
[email protected]
eng/OP
www.hhw.de
82.23
8
• Swivel stool • Standing supports • Tubular steel table • Stackable chair 82445 - 82446
Office Swivel Chair
Type Adjustable in height from 390 - 530 mm with TOPLIFT gas spring, back rest adjustable in height, with integrated lumbar support, inclination mechanically adjustable (permanent contact). Special moulded seat, telescopic collar. Safety double runners for carpet flooring. Black frame.
82446 Arm rests type E Pair, black.
82445
Swivel chair 82445
Fabric cover Colour grey melange
301
82441
… 101
Office Swivel Chair
Type Seat height infinitely adjustable by TOPLIFT. Synchronous adjustment of seat and back rest in accordance to body weight thanks to new point-sychronous mechanic with spring-force adjustment. Can be locked in place, with extra large opening angle. Back rest mounted to be flexible in three dimensions. Incl. of lumbar support adjustable in height. Back rest with net cover of the same colour.
Height adjustment mm 420 - 550
Arm rest 82446
Foot rest aluminium silver, incl. of arm rests, fabric cover blue.
82463
Note: Floor caps see cat.-no. 82449.
Pro
Height of back rest mm 620
82463
… 101
Ergonomie
82463
…
Ergonomie
Pro
Office Chair Synchro PRO
Type Seat height infinitely adjustable by TOPLIFT, TÜVtested. Seat and back rest synchronously adjustable (point-synchronous), back rest adjustable in height, with integrated lumbar support, ergonomic intervertebral disc seat. Fabric cover dark grey. Safety double runners for carpet flooring. Foot rest black.
Note: Arm rests type M see cat.-no. 82451 201.
82441
Height adjustment mm 420 - 550
8
101
Office Chair -Century-PRO
Type Adjustable in height from 420-550 mm with TOPLIFT gas spring, special deep springing, seat and back rest synchronous adjustable (point-synchronous), spring force adjustment, back rest adjustable in height, with integrated lumbar support, special intervertebral and moulded seat, telescopic collar, safety double runners for carpeting. Black frame. Arm rests not included (see cat.-no. 82451).
82451 Arm rests type M, adjustable in height, in pairs, black. For cat.-no. 82441 and 82450.
82451 82450
Pro
Swivel chair 82450
Fabric cover Colour dark blue/light blue
82449
…
…
Arm rest 82451
201
… 201
Ergonomie
82450 - 82451
82441
Ergonomie
Pro
Floor Caps
Application For a solid stand of the chair. Can be retrofitted. For cat.-no. 82434, 82436, 82440, 82444 and 82463.
1 set = 5 pcs.
82449
82449
… 201
82.24
www.hhw.de
eng/OP
ß
Workshop furnishings Foldable Standing Supports
82452 - 82453
Type Frame made of plastic-coated profiled sheet steel. Seat and back rest infinitely adjustable by means of clamping device. Breathable wear-resistant fabric covers made of cloth and/or Skai.
Frame colours
fabric cover/ colour
jet black light grey traffic red traffic red
Skai/black cloth/blue cloth/grey Skai/black
82458 - 82459
82452 Without back rest.
82453
82453 With back rest.
without back rest 82452
…
with back rest 82453
… 601 603 604
601
Standing Support Ergo Plus 3000
E
82458 Type Frame made of powder-coated square steel with floor caps. Frame colours aluminium grey. Seat and back rest adjustable in height 600 - 900 mm. Comfortable seat and large back rest. Multi-ply cushioning of the breathable Skai cushion. Fabric cover Skai-black.
82459 Foot rest Type Colour: black. Application For standing support cat.-no. 82458.
Standing support Foot rest
82458
82459
82458
82460 - 82461
82452
…
82459
…
601 601
Tubular steel table and stackable chair
Application Perfect for canteens and recreation areas.
82460 201
82460 205
82460 Tubular steel table Type Table top 25 mm thick, scratch-proof, coated with edge band made of laminated plastics. In compliance with DIN 68765 E 1 quality. Grey design, steel frame 30 x 30 mm powder-coated with structured surface RAL 7035 light grey. Legs with floor caps adjustable in height. Disassembled to save space, in cardboard box, easy assembly. 82461 Stackable chair Type Frame made of circular tube 22 mm plastic-coated RAL 7035 light grey. Seat base and back rest made of beechwood.
Dimensions of table L x W x H mm 1200 x 800 x 720 1600 x 800 x 720 –
Dimensions of chair W x H x D mm – – 420 x 440 x 400
82461
Table 82460
…
Chair 82461
8
…
201 205 201
Workshop furnishings Everything from one source. We customize your workshop using CAD technology.
Need some advice? Contact us:
[email protected]
eng/OP
www.hhw.de
82.25
• Tool holder • Perforated panels
. Workshop furnishings for the discerning customer: We offer customised workshop furnishings for: industry, trade, training workshops, workshops for the handicapped, universities, vocational schools.
8
Everything from one source. We can use CAD software to plan your workshop and to customise it according to your needs and requirements. We are here to assist you.
For more detailed information on partition walls and organisation or filing systems, please ask for our catalogue, order number 00 080 235!
82.26
www.hhw.de
eng/OP
ß 82479
Workshop furnishings Tool holder assortments (tools not included)
Application Tool holder for perforated panel, partition walls, workshop trolleys, cabinets. The perfect tool holder for each tool.The tool holders simply have to be hung in the desired hole and to be fixated with a small plastic screw. The usage of a plastic screw prevents scratching the surface of the panels. No damage to the surface. Note: Suitable tool assortments see cat.-no. 51660 - 51664 and tool cabinets cat.-no. 82550 - 82551.
Figure: tool cabinet (cat.-no. 82551), tool holder assortment (cat.-no. 82479 204) and tool assortment (cat.-no. 51663).
Figure: tool cabinet (cat.-no. 82550), tool holder assortment (cat.-no. 82479 202) and tool assortment (cat.-no. 51661).
Tool holder assortment for 60 tools 74 tools 93 tools 129 tools 138 tools
82465
for tool assortment see cat.-no. 51660 201 51661 101 51662 201 51663 101 51664 101
Suitable for tool cabinets cat.-no. 82550 + 82551 82550 + 82551 82550 + 82551 82550 + 82551 82550 602-603 + 82551 602-603
Type The systematic path to organisation with RasterPlan perforated panels. Can be used in many different ways, from the single perforated panel on the wall to partition walls, trolleys, to tool cabinets with retractable panels. - clearly arranged storage of tools - quick access - systemised and colour-coded organisation - shock and scratch-proof plastic coating - especially shaped beams - sheet steel 1,25 mm - concealed screw holes
Dimensions W x H mm Colour
82465
vertical or horizontal
500 x 450 82465
… 310 601 311 312 313 305 306 307 308 309
1000 x 450 82465
… 401 602 402 403 404 405 406 407 408 409
1500 x 450 82465
…
2000 x 450 82465
501 603 502 503 504 505 506 507 508 509
… 701 604 702 703 704 705 706 707 708 709
Tool holder assortments for perforated panels
Type The perfect tool holder for each tool, plastic laminated, colour aluminium. The brackets simply have to be hung in the desired hole and to be fixated with a small plastic screw.
eng/OP
201 202 203 204 205
- 10 brilliant colours - 4 dimensions, 8 different applications - compatible to RasterPlan slotted panels
RAL 5012 light blue RAL 6011 reseda green RAL 5015 sky blue RAL 5010 gentian blue RAL 3020 traffic red RAL 1023 traffic yellow RAL 7035 light grey RAL 7015 slate grey RAL 9005 jet black RAL 9010 pure white
Tool holder Assortments 10-part 12-part 15-part 18-part 28-part 40-part
…
RasterPlan perforated panel system (empty)
E
82471
82479
82471
82471 100
82471 101
82471 102
82471 103
82471 104
82471 105
… 100 101 102 103 104 105
www.hhw.de
82.27
8
• Tool holder 82480
Tool holder for perforated panels
Type Tool holders create order and organisation. - shock and scratch-proof plastic coating colour: aluminium - stamped base plate 1,5 mm thick - incl. of RasterPlan plastic screw
82480 108-111
82480 112-116
82480 129
82480 130
82480 131
82480 132-133
82480 134-135
82480 136
82480 137
82480 138
82480 173
82480 139
82480 140-141
82480 142
82480 143
82480 144
8
82.28
www.hhw.de
82480 101-104
82480 117-121
82480 122-124
Size mm Tool holder with slanted hook end 50 Tool holder with slanted hook end 100 Tool holder with slanted hook end 150 Tool holder with slanted hook end 200 Tool holder with vertical hook end 35 Tool holder with vertical hook end 75 Tool holder with vertical hook end 125 Tool holder double 35 x 35 Tool holder double 50 x 35 Tool holder double 75 x 35 Tool holder double 150 x 35 Tool clamp single – Tool clamp single – Tool clamp single – Tool clamp single – Tool clamp single – Tool clamp double – Tool clamp double – Tool clamp double – Tool clamp double – Tool clamp double – Pliers holder 35 x 20 Pliers holder 55 x 20 Pliers holder 75 x 20 Power tool holder – Power tool holder – Power tool holder – Tool holder 3-x 150 x 45 Tool holder 6-x 140 x 240 Combination tool holder 2-part 150 x 55 Wrench holder for 8 wrenches Screwdriver holder for 6 screwdrivers Screwdriver holder for 12 screwdrivers Twist drill holder for 14 drills Twist drill holder for 28 drills Saw holder for 4 saws Storage plate 350 x 125 Round can holder 1-x 100 Round can holder 3-x 300 Hose holder 230 x 125 Storage box holder 5-x for size 7 550 x 58 Storage box holder 5-x for size 8 550 x 38 Customisable tool holder 120 x 45 Customisable tool holder 390 x 45 Socket tray 12 openings 390 x 30 Bit holder 7-part 150 x 35 Ring wrench holder for 10 wrenches Open-end wrench holder for 10 wrenches Leaflet clip DIN A4, RAL 7035 light grey 220 x 310 Leaflet clip DIN A3, RAL 7035 light grey 440 x 310 Form sheet clip DIN A4, RAL 7035 light grey 220 x 310 Spare screw – Paper roll holders for width 295 mm 355 x 120 Tool holder with straight arbor single 50 Tool holder with straight arbor single 100
82480 105-107
82480 125-127
Ø mm 6 6 6 6 6 6 6 6 6 6 6 6 10 13 16 19 6 10 13 16 19 – – – 40 60 80 – – – – – – – – – – 70 70 – – – – – – – – – – – – 6 6
82480 128
Pack= pcs. 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 100 1 5 5
82480
… 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 173 139 140 141 142 143 144 150 151 152 160 174 165 166 171 175 176
eng/OP
ß
Workshop furnishings
82480 150
82480 151
82480 152
82480 160
82480 174
82480 165
82480 166
82480 171
82480 175-177
82480 178-180
82480 181
82480 182
82480 183
82480 184
82480 185
82480 186-187
82480 188
82480 189-190
82480 191
82480 192-193
82480 194
82480 195
82480 196
82480 197
82480 198
82480 199
82480 200
82480 201
82480 172
82480 202
82480 203
Tool holder with straight arbor single Tool holder with straight arbor double Tool holder with straight arbor double Tool holder with straight arbor double Magnetic holder Slanted hooks for socket wrench and screwdriver bits Customisable base plate Customisable base plate Round holder Pipe holder Pipe holder Tool holder SB Cable holder Cable holder Allen key holder Tool holder for MT2 Tool holder for MT3 Storage box holder 1-x Gripper clamp holder Reel holder shaft 17 mm Arbor for oval cans Tool holder with wooden plate Tray Roll holder for width 300 mm, core Ø min. 22 mm, RAL 7035 light grey Bin liner holder clamping ring, RAL 7035 light grey Grinding paper roll holder for width 300 mm, RAL 7035 light grey Steel shelf with flanged edge, RAL 7035 light grey Steel shelf tray, RAL 7035 light grey
eng/OP
Size mm 150 50 100 150 14 / 40 small large 65 x 25 35 35 125 x 30 150 x 37 200 x 37 for 9 keys 85 x 395 85 x 395 for size 7 + 8 55 max. 78 50 x 500 320 x 135 x 55 55 x 320 x 135 310 x 384 370 x 320 490 x 243 435 x 250
Ø mm 6 6 6 6 40 6 60 100 6 6 1 - 11 17 23 from 19 170 220 330 -
Pack= pcs. 5 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
www.hhw.de
82480
… 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 172 202 203
82.29
8
• Perforated panels • Slotted panels • Tool holder • Wall cabinets 82481
Drawer Module for Perforated Panels
Internal drawer dimensions W x D mm 318 x 158
82482
82481
… 101
RasterPlan slotted panel system (empty)
E
Type The systematic path to organisation with original RasterPlan slotted panels. A basic element of the RasterPlan system. Multi-purpose adapter, storage bins, steel shelves and many other holders can easily be attached to the slotted panels. RasterPlan slotted panels can be used in many different ways, on walls, as back walls of workbenches, in partition walls, trolleys, even in cabinets. And everything is provided by a single system. - clearly arranged storage of tools - quick access - systemised and colour-coded organisation - for HHW storage bins size 5 - 8 - shock and scratch-proof plastic coating - especially shaped beams - sheet steel 1,25 mm - concealed screw holes - 9 brilliant colours - 7 dimensions, 7 different applications - compatible to RasterPlan perforated panels
dimensions of the slotted panel W x H mm Colour
82482 201-409 Type Wide version.
82482
82482 501-809 Type Upright version.
Design on the reverse side: RasterPlan slotted panels are reinforced on the reverse side by means of special beams, doubly spot-welded, for highest load.
500 x 450 82482
RAL 5012 light blue RAL 5015 sky blue RAL 5010 gentian blue RAL 3020 traffic red RAL 1023 traffic yellow RAL 7035 light grey RAL 7015 slate grey RAL 9005 jet black RAL 9010 pure white
8
82481
Standard finish: RAL 7035 light grey. Application For mounting on perforated panels.
Type Telescope rails, 100% extension, ball-bearing mounted, front height 2 x 80 mm with recessed grips, weight 4,5 kg, load capacity approx. 3 kg per drawer.
… 301 302 303 304 305 306 307 308 309
1000 x 450 82482
…
1500 x 450 82482
401 402 403 404 405 406 407 408 409
… 201 202 203 204 205 206 207 208 209
2000 x 450 82482
… 210 211 212 213 214 215 216 217 218
450 x 1000 82482
… 801 802 803 804 805 806 807 808 809
450 x 1500 82482
…
450 x 2000 82482 …
501 502 503 504 505 506 507 508 509
701 702 703 704 705 706 707 708 709
. Stacking bins for slotted panels The special design of the rail enables the user to remove and replace the storage bins horizontally, be they full or empty. No more spilling the contents.
horizontal
size 5
size 6
vertical
size 8 size 7 snap in and presto!
82.30
www.hhw.de
eng/OP
ß
Workshop furnishings RasterPlan tool holder for slotted panels
82485
E
Application For hanging into the slotted panel of RasterPlan system. Multi-purpose adapter, storage bins, steel shelves and many other holders can easily be attached to the slotted panels. Robust and sturdy, made for long service life in the industry. - shock and scratch-proof plastic coating - stamped base plate 1,5 mm thick - high load capacity
82485 101-102
82485 103-104
82485 105
82485 106
82485 107
82485 108
82485 109
82485 113
82485 114
82485 115
82485 116
82485 117
82485 118
Size Ø mm mm Multi-purpose adapter round load capacity 10 kg 200 12 Multi-purpose adapter round load capacity 10 kg 300 12 Multi-purpose adapter square-end load capacity 17 kg 200 15 x 15 Multi-purpose adapter square-end load capacity 17 kg 300 15 x 15 Shaft holder shaft distance 55 mm load capacity 17 kg 200 – Plug holder load capacity 17 kg 140 x 60 – Pipe holder load capacity 17 kg 160 20 Steel shelf RAL 7035 500 x 250 – Steel shelf RAL 7035 1000 x 250 – Base plate with lettering area Adapter for perforated panel tool holder Multi-purpose tool holder with lettering area load capacity 10 kg 200 12 Form sheet clip DIN A4, RAL 7035 light grey Leaflet clip DIN A4, RAL 7035 light grey Leaflet clip DIN A3, RAL 7035 light grey -
84680
Pack= pcs. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
82485
… 101 102 103 104 105 106 107 108 109 113 114 115 116 117 118
Wall Cabinets
ß
84680
Type 1 adjustable shelf per compartment. Back wall with square holes 10 x 10 mm. Distance from centre of hole to centre of hole 38 mm, for individual configuration. Doors for left-hand or right-hand opening, separately lockable with cylinder lock. Standard finish: Housing RAL 7035 light grey, Doors RAL 5012 light blue. Note: Suitable hook see cat.-no. 82480 cont.
HxWxD mm 750 x 500 x 200 750 x 1000 x 200 750 x 1500 x 200
eng/OP
Number of doors 1 2 3
Number of compartments 1 2 3
Number of shelves 1 2 3
84680
… 601 602 603
www.hhw.de
82.31
8
• Perforated panels • Slotted panels RasterPlan workbench attachments
82467
E
Application For mounting at workbenches and panels above each other. 2 holding fixtures are needed for each panel.
Type Fastening material included.
Workbench attachment for panels wide version for 1 panel for 2 panels above each other
82467
… 101 105
RasterPlan combination plates
82470
E
Note: Extensive perforated and slotted panel accessories see cat.-no. 82471, 82480, 82485, and 82467.
Type 2/3 perforated and 1/3 slotted panel.
Dimensions H x W mm 450 x 1500 450 x 1500
82467
Colour
82470
RAL 7035 light grey RAL 5012 light blue
82470
… 303 301
RasterPlan wall rails (empty)
82486 - 82487
E
Note: Extensive perforated and slotted panel accessories see cat.-no. 82471, 82480, 82485, and 82467.
82486 201
82487 102
Dimensions length x height mm 460 x 70 920 x 70 460 x 100 460 x 100 920 x 100 920 x 100
Perforated panel colour 82486 RAL 7035 light grey RAL 7035 light grey RAL 7035 light grey RAL 5012 light blue RAL 7035 light grey RAL 5012 light blue
…
slotted panel 82487
…
101 201
82487 201
101 102 201 202
. RasterPlan partition walls
E
8
Separating workplaces, partition or organising rooms, whatever the purpose, the RasterPlan Partition Wall System is the solution. Individual elements as well as pre-fabricated customised solutions for partition walls and other applications. Please send us your enquiry.
End column
82.32
Centre Centre column 180° column 90°
www.hhw.de
Centre column 135°
Centre column cross
Single frame
Double frame 180°
Double frame 90°
eng/OP
ß
Workshop furnishings
. Partition walls with perforated and/or slotted panels
E
Dimensions of partition walls Width x Depth 1000 x 240 mm (double-sided depth 430 mm) Height: size 2 = 760 mm size 3 = 1100 mm size 4 = 1450 mm size 5 = 1790 mm
These partition walls which can be equipped with RasterPlan perforated panels, slotted panels or both, are intended for workplaces, where both tools and small parts, such as screws have to be in reach. - modular design with 4 different heights - alterations such as exchanging slotted or perforated panels is possible any time - shock and scratch-proof plastic coating - Frame light grey RAL 7035 / panels light blue RAL 5012 - available as single and double-sided version
RasterPlan partition walls are fitted for mounting on the floor with concealed screw holes. Fittings partition walls for size 2 With SW-A . 1 toolholder assortment 12-part
With SW-B . 1 toolholder assortment 10-part . 3 stacking bins size 7 . 4 stacking bins size 8
size 2 with fittings SW-B
size 3 with fittings SW-C
size 4 with fittings SW-E
for size 3 with SW-C 1 toolholder assortment 15-part 6 stacking bins size 6 8 stacking bins size 7
for size 4 with SW-E 1 toolholder assortment 28-part 6 stacking bins size 6 4 stacking bins size 7 4 stacking bins size 8
with SW-D 1 toolholder assortment 10-part 1 shelf 500 mm 2 Plug holder 4 stacking bins size 6 2 stacking bins size 7 2 stacking bins size 8
with SW-F 1 toolholder assortment 28-part 1 shelf 500 mm 2 Plug holder 4 stacking bins size 6 2 stacking bins size 7
size 5 with fittings SW-G
for size 5 with SW-G 1 toolholder assortment 40-part 1 Form sheet clip 1 shelf 1000 mm 2 Plug holder 1 Pipe holder 1 multi-purpose adapter square 9 stacking bins size 7 with SW-H 1 toolholder assortment 40-part 6 stacking bins size 6 8 stacking bins size 7 8 stacking bins size 8
. RasterMobil workshop trolley with perforated or slotted panels
E
8
Mobile storage for material and tools in workshop, production and assembly hall. - modular design with 3 different heights - alterations such as exchanging slotted or perforated panels is possible any time - shock and scratch-proof plastic coating - wheel module light grey RAL 7035 / panels light blue RAL 5012 - slotted or perforated panels on both sides - ergonomical handles Dimensions workshop trolley Width x Depth 1000 x 500 mm Height: size 2 = 890 mm size 3 = 1230 mm size 4 = 1580 mm Fittings Workshop trolleys size 2 With RW-A . 1 toolholder assortment 10-part . 8 stacking bins size 7 . 4 stacking bins size 8
eng/OP
size 2 with fitting RW-A
size 3 with RW-B 1 toolholder assortment 15-part 6 stacking bins size 6 4 stacking bins size 7
size 3 with fittings RW-B
size 4 with fitting RW-E
size 4 with RW-E 1 toolholder assortment 28-part 1 shelf 500 mm 1 multi-purpose adapter 2 Plug holders 9 stacking bins size 7
www.hhw.de
82.33
• Tool cabinets
. Shelves with Storage Bins
E
Sticking system, galvanised. Shelves can be 300, 400 and 500 mm deep, each with 16 shelves/ panels. Height of shelf 2000 mm, width of shelf 1000 mm. Not assembled.
RasterPlan perforated panel tool cabinets (empty)
82510 - 82513
E
Type Sturdy, made of sheet steel. Shock and scratch-proof plastic coating. Back wall RasterPlan hole panel. Distance piece for a secure mounting on walls. Opening angle more than 180°. Security cylinder lock.
82510 With doors with perforated panels.
82510
82513 With doors with perforated panels and 2 additional inner doors.
Note: Perforated panel accessories see cat.-no. 82471 and 82480.
colour doors RAL 5012 light blue RAL 7035 light grey
colour housing RAL 7035 light grey RAL 7035 light grey
82550 - 82554
82513
Dimensions H x W x D mm 620 x 920 x 335 620 x 920 x 335
… 101 102
82513
… 101 102
RasterPlan tool cabinets
E
8
82510
Type Sturdy, made of sheet steel. Shock and scratch-proof plastic coating. Back wall RasterPlan hole panel. Front-built doors for a smooth front, opening angle more than 200°. Continuous rodding guiding, double-walled reinforced doors. Galvanised shelves, load capacity 80 kg at equal distribution. Adjustability 10 mm grid pattern. Three-bolt security cylinder lock.
82550 604 Additional shelf Type Galvanised, depth 410 mm. Application Suitable for RasterPlan tool cabinets with doors with perforated panels (cat.-no. 82550), doors with slotted panels (cat.-no. 82552) and doors with windows (cat.-no. 82554).
82550 604
82554 103
82550 103 82550 100 82550 099
Dimensions H x W x D mm 1000 x 1000 x 410 1600 x 1000 x 410 1950 x 1000 x 410 Additional shelf
82.34
number of shelf – 1 2 –
www.hhw.de
Doors with perforated panels colour colour 82550 doors housing RAL 5012 light blue RAL 7035 light grey RAL 5012 light blue RAL 7035 light grey RAL 5012 light blue RAL 7035 light grey – –
Doors with slotted panels Doors with windows … 82552 … 82554 099 100 103 604
101 102 103
…
103
eng/OP
ß
Workshop furnishings RasterPlan tool cabinets
82555 - 82556
E
82555 Type RasterPlan tool cabinets for a professional and practical storage and organisation of high-quality tools and materials, with drawers (100 mm front height) and integrated workbench (Multiplex) top (30 mm thick). We recommend fastening the tool cabinets to the wall or the floor. H x W x D 1950 x 1000 x 600 mm. Sturdy, made of sheet steel. Shock and scratch-proof plastic coating. Housing light grey RAL 7035, doors light blue RAL 5012 or light grey RAL 7035. Back wall with RasterPlan hole panel and/or slot profile. Front-built doors for a smooth front, opening angle more than 200°. Continuous rodding guiding, double-walled reinforced doors. Telescope-guided drawers with 100% extension. Retrofitting is also
possible. Drawer load capacity 110 kg at equal distribution. Galvanised shelves, load capacity 80 kg at equal distribution. Adjustability 25 mm grid pattern. Three-bolt security cylinder lock.
82556 608-609 Drawer Type 175 mm front height.
Note: Additional drawers, shelves, and workbench top see cat.-no. 82556 599-609.
82556 603 Storage shelf Type Galvanised, load capacity 80 kg at equal distribution.
82556 599-600 Drawer Type 100 mm front height.
82556 604 Workbench top Type Multiplex, 30 mm thick.
82556 606-607 Drawer Type 125 mm front height.
Model 3
Model 1
Model 6
Model 4
Model 5
Model 7 82556 599
82556 603
82556 600
82556 604
8 Doors with perforated panels Model 1 3 4 5 6 7 Doors with slotted panels Model 1 3 4 5 6 7
number of Shelves 3 1 2 2 2 -
number of drawers 2 4 4 3 2 9
workbench top
number of Shelves 3 1 2 2 2 -
number of drawers 2 4 4 3 2 9
workbench top
RAL 7035/5012 82555
1 1 1
1 1 1
…
RAL 7035 82555
102 106 101 107 108 104 RAL 7035/5012 82555
…
… 202 206 208 209 210 204
RAL 7035 82555
100 105 112 110 111 103
… 201 205 212 213 214 219
Continuation
eng/OP
www.hhw.de
.
82.35
• Tool cabinets • Storage bins see Doors with windows Model
number of Shelves 3 1 2 2 2 -
1 3 4 5 6 7
number of drawers 2 4 4 3 2 9
RAL 7035/5012 82555
workbench top 1 1 1
RAL 7035 82555
501 502 503 504 505 506 RAL 5012 82556
Accessories
…
drawer 100 mm front height drawer 125 mm front height drawer 175 mm front height shelf workbench top
RAL 7035 82556
… 600 606 608
…
… 701 702 703 704 705 706
82556
…
599 607 609 603 604
S. 85.1
S. 83.21
S. 82.12
S. 53.6
S. 82.9
8 Workshop furnishings Everything from one source. We customize your workshop using CAD technology.
S. 53.10
82.36
www.hhw.de
Need some advice? Contact us:
[email protected]
eng/OP