Type T19.10 Analog Temperature Transmitter
Standard Features
Input: PT 100 OR thermocouples
Configurable Co Ranges Using Solder Pads
Output: 4 …20 mA, 2 wire design
RTD or Thermocouple Programmable Ranges Economical
Fault Signal: For sensor burnout and sensor short circuiting
Temperature Range: Large ambient temperature range Size: Compact
Guarantee: 5 years
Type T19.10 Analog Temperature Transmitter
Datasheet: T19.01
Ready-To-Ship Temperature Transmitters
Description Part #
Type
Pt100 Small Range 3656471 Pt100 Large Range 3656609
Price $120.00
Type T19.30 Analog Temperature Transmitter
Standard Features
Input: PT 100 OR thermocouples Configurable Co Ranges
Output: 4 …20 mA, 2 wire design
RTD or Thermocouple Programmable Ranges DIN Rail Mount
Fault Signal: For sensor burnout and sensor short circuiting Temperature Range: Large ambient temperature range Size: Compact
Guarantee: 5 years Datasheet T19.30
Type T19.30 Analog Temperature Transmitter
Ready-To-Ship Temperature Transmitters
Type
Description Part #
Pt100 Small Range 7827912 Pt100 Large Range 7889178
Price $148.00
For pricing info, call 1-888-WIKA-USA or visit www.wika.com
Type T24.10 Temperature Transmitter Standard Features
Configurable with Windows PC without sensor simulation, remote configuration also possible from the control room via the current loop
Analog signal processing, ideal for multiplex-systems
RTD Only Programmable Potted Electronics
For Pt 100 and resistance-sensors, 3 wire Analog output 4 … 20 mA, 2 wire design
EMC Conformity per EN 61 326 and NAMUR NE 21
Sensor burnout monitoring in accordance with NAMUR NE 43
Compact design suitable for any DIN connection head of form B
Ready-To-Ship Temperature Transmitters Type
Standard
Description Part #
Price
4363048
$210.00
Type T24.10 Temperature Transmitters
Datasheet: T24.10
Type T53.10 Fieldbus Temperature Transmitter Standard Features Field bus protocol PROFIBUS PA & Foundation Fiedbus Configurable for connection to RTDs, Thermocouples, Resistance - sensor, mV - sensor
Foundation Fieldbus PROFIBUS® Transmitter Programmable Digital Temperature Transmitter
Dual sensor capable Class protection, intrinsically safe per FISCO-Model II 1 G EEx ia ll B / II C T4 / T5 / T6 II 2 G EEx ib ll B / II C T4 / T5 / T6 EMC Directive 89/336/EWG, DIN EN 61 326:2002, NAMUR NE 21 Isolation voltage AC 1500 V between sensor and bus
Type T53.10 Fieldbus Temperature Transmitter
95% Rh protection Terminal connections with captive screws
Data sheet: T-53.10
Ready-To-Ship Temperature Transmitters Type
Standard
Description Part # 42512236
For pricing info, call 1-888-WIKA-USA or visit www.wika.com
Price
$690.00
Type T12.10 Digital Temperature Transmitter Standard Features
Inputs: Refer to table Accuracy: RTD: (Per DIN IEC 770, 23°C ±5°C) ±0.2 °C or 0.1°C + 0.05% of valve; Thermocouple: (Per DIN IEC 770, 23°C ±5°C) 0.5°C or 10uV or 0.05% of value
Digital Temperature Transmitter Programmable CE Certified
Thermocouple Break Protection: Program- mable, Upscale (23 mA) or Downscale (3.8 mA) Cold Junction Compensation: Programmable internal or external (Pt 100), Accuracy ±1.0°C RTD Wiring Configuration: 2, 3, or 4 wire Response Time: Programmable 1 to 60 seconds. Measurement Update Time 2/second
Type T12.10
Maximum Lead Wire Resistance: Thermocouple: 500 Ohm; RTD: 10 Ohm per lead Output: 4-20 mA Maximum Output Load: RMAX < (VS - 9v) / 0.021 A Load Effect: < 0.01% of span/100 Ohm Power Supply: 9 to 36 Vdc Power Supply Effect: < 0.005% of span/V Isolation: 1500 Vac, 60 s Environmental: Operating Temperature: -40 to 185°F (-40 to 85°C ); Optional Operating Temperature: -40 to 220°F (-40 to 105°C), -58 to 185°F(-50 to 85°C); Humidity: 100% non- condensing Vibration: 10 Hz to 2 KHz, 5 g per DIN IEC 68 2-6; Warm-up time: 5 minutes Construction: Case Material: Plastic; Dimensions: 1.95" dia. (49.5 mm ), 1.12" ht. (28.5 mm); Weight: 2.47 oz (0.07 kg.) Warranty: 5 years
T-12 Programmable Inputs and Ranges Input Sensor Standard Range °C Range °F Min. Span J IEC 584 -100 to 1200 -148 to 2192 50 K K IEC 584 -180 to 1372 -292 to 2500 50 K N IEC 584 -180 to 1300 -292 to 2372 100 K T IEC 584 -200 to 400 -328 to 752 50 K E IEC 584 -100 to 1000 -148 to 1832 50 K Thermocouple L DIN 43710 -100 to 900 -148 to 1652 50 K U DIN 43710 -180 to 600 -292 to 1112 75 K R IEC 584 -50 to 1760 -58 to 3200 200 K S IEC 584 -50 to 1760 -58 to 3200 200 K B IEC 584 400 to 1820 752 to 3308 200 K W3 ASTM E988 0 to 2300 32 to 4172 200 K W5 ASTM E988 0 to 2300 32 to 4172 200 K RTD Pt 100 Pt 100 -200 to 850 -328 to 1562 25 K Ni 100 Ni 100 -60 to 250 -76 to 482 25 K Linear 0 to 5K Ohm 30 Ohm Resistance DC Voltage -10 to 800 mV 5 mV (Unipolar)
Ready-To-Ship Temperature Transmitters Type
Standard Rail Adapter Configuration Set
Description Part #
3616933 3593789 11606304
Price
$290.00 $21.35 $264.30
Datasheet: T12.10 For pricing info, call 1-888-WIKA-USA or visit www.wika.com
Type T12.30 Digital Temperature Transmitter Digital Temperature Transmitter Programmable DIN Rail
Standard Features
Inputs: Refer to table Accuracy: RTD: (Per DIN IEC 770, 23°C ±5°C) ±0.2 °C or 0.025%FS + 0.1;Thermocouple: (Per DIN IEC 770, 23°C ±5°C) ±0.5 or 0.05%FS or ± 10µv Thermocouple Break Protection: Programmable, Upscale (23 mA) or Downscale (3.8 mA) Cold Junction Compensation: Programmable internal or external (Pt 100), Accuracy ±1.0°C RTD Wiring Configuration: 2, 3, or 4 wire Response Time: Programmable 1 to 60 seconds Measurement Update Time: 2/second Maximum Lead Wire Resistance: Thermocouple: 500 Ohm; RTD: 10 Ohm per lead
Type T12.30
Output: 4-20 mA Maximum Output Load: RMAX < (VS - 9v) / 0.021 A Load Effect: < 0.01% of span/100 Ohm Power Supply: 9 to 36 Vdc Power Supply Effect: < 0.005% of span/V Isolation: 1500 Vac, 60 s Environmental: T12.30 Operating Temperature: -14 to 158°F (-25 to 70ºC); Humidity: 100% non- condensing; Vibration: 10 Hz to 2 KHz, 5 g per DIN IEC 68 2-6; Warm-up time: 5 minutes Construction: Case Material: Plastic; Weight: T12.10: 2.4oz (0.07kg); T12.30: 7oz (0.2kg) Warranty: 5 years
T-12 Programmable Inputs and Ranges Input Sensor Standard Range °C Range °F Min. Span J IEC 584 -100 to 1200 -148 to 2192 50 K K IEC 584 -180 to 1372 -292 to 2500 50 K N IEC 584 -180 to 1300 -292 to 2372 100 K T IEC 584 -200 to 400 -328 to 752 50 K E IEC 584 -100 to 1000 -148 to 1832 50 K Thermocouple L DIN 43710 -100 to 900 -148 to 1652 50 K U DIN 43710 -180 to 600 -292 to 1112 75 K R IEC 584 -50 to 1760 -58 to 3200 200 K S IEC 584 -50 to 1760 -58 to 3200 200 K B IEC 584 400 to 1820 752 to 3308 200 K W3 ASTM E988 0 to 2300 32 to 4172 200 K W5 ASTM E988 0 to 2300 32 to 4172 200 K RTD Pt 100 Pt 100 -200 to 850 -328 to 1562 25 K Ni 100 Ni 100 -60 to 250 -76 to 482 25 K Linear 0 to 5K Ohm 30 Ohm Resistance DC Voltage -10 to 800 mV 5 mV (Unipolar)
Ready-To-Ship Temperature Transmitters Type
Standard Configuration Set
Description Part #
3625321 11606304
Datasheet: T12.30 For pricing info, call 1-888-WIKA-USA or visit www.wika.com
Price
$392.00 $264.30
Type T32.1S/T32.3S
Digital Temperature Transmitter with Hart® protocol
Digital Temperature Transmitter Programmable HART® Communicator Standard Features
Output: 4-20 mA Inputs: Refer to table TÜV certified SIL version for protective equipment
Type T32.1S
Universal connection for one or two sensors Sensor drift detection allows an error signal to be sent if deviation between sensor 1 and sensor 2 exceeds user selectable value
Type T32.3S
Sensor break detection in accordance to NAMUR NE89 Isolation: voltage AC 12--V between server and current loop Warranty: 5 years
Ready-To-Ship Temperature Transmitters Type
T32.1S - Standard T32.3S - Standard
Description Part # 12655423 12655458
Datasheet: T32.1S & T32.3S For pricing info, call 1-888-WIKA-USA or visit www.wika.com
Price
$440.00 $555.00
Type T32.1S/T32.3S
Digital Temperature Transmitter with Hart® protocol
Temperature transmitter input Resistance sensor Pt100 Pt(x)
4)
JPt100
10 ... 1000
Ni100
Resistance sensor
max. configurable measuring range 1)
-200 ... +850 °C
Standard
α values
IEC 60751: 2008 α = 0.00385
-200 ... +850 °C
IEC 60751: 2008
-60 ... +250 °C
DIN 43760: 1987 α = 0.00618
-200 ... +500 °C 0 ... 8,370 Ω
JIS C1606: 1989
Minimum measuring span 14) 10 K or 3.8 Ω whichever is greater
α = 0.00385
α = 0.003916
4Ω
0 ... 100 % Sensor current at the measurement
max. 0.3 mA (Pt100)
Max. wire resistance
50 Ω each wire, 3-/4-wire
Potentiometer
9)
10 %
Type J (Fe-CuNi) Type K (NiCr-Ni)
Type L (Fe-CuNi)
Type E (NiCr-Cu)
max. configurable measuring range 1)
Standard
-270 ... +1,372 °C
IEC 60584-1: 1995
-210 ... +1,200 °C
IEC 60584-1: 1995
-200 ... +900 °C
DIN 43760: 1987
-270 ... +1,000 °C
Type N (NiCrSi-NiSi) -270 ... +1,300 °C Type T (Cu-CuNi)
-270 ... +400 °C
Type R (PtRh-Pt)
-50 ... +1,768 °C
Type U (Cu-CuNi) Type S (PtRh-Pt)
Type B (PtRh-Pt) mV sensor
Connection type
-200 ... +600 °C
Minimum measuring span 14)
50 K or 2 mV whichever is greater
IEC 60584-1: 1995 IEC 60584-1: 1995 IEC 60584-1: 1995 DIN 43710: 1985
0 ... +1,820 °C 15) IEC 60584-1: 1995
200 K
IEC 60584-1: 1995
- 500 ... +1,800 mV
Cold junction compensation, configurable 1) 2)
≤ ±0.12 °C
≤ ±0.0094 °C 6) 7)
≤ ±0.12 °C
≤ ±0.12 °C
5)
≤ ±1.68 Ω ≤ 0.50 %
5)
8)
10)
≤ ±0.0094 °C 6) 7) ≤ ±0.0094 °C 6) 7) ≤ ±0.1584 Ω 8)
≤ ±0.0100 % 10)
Typical measuring Temperature coefficient deviation 2) per °C typical 3) ≤ ±0.91 °C 11)
≤ ±0.0217 °C 7) 11)
≤ ±0.91 °C 11)
≤ ±0.0203 °C 7) 11)
≤ ±0.91 °C 11) ≤ ±1.02 °C 11) ≤ ±0.92 °C 11)
150 K
Max. wire resistance
≤ ±0.0094 °C 6) 7)
5)
≤ ±0.98 °C 11)
IEC 60584-1: 1995
-50 ... +1,768 °C
≤ ±0.12 °C 5)
1 sensor 2- /4- /3-wire or 2 sensors 2-wire (for further information, please refer to designation of terminal connections)
Connection type
Thermocouple
Typical measuring Temperature coefficient deviation 2) per °C typical 3)
150 K
4 mV
≤ ±0.92 °C 11) ≤ ±1.66 °C 11) ≤ ±1.66 °C 11)
≤ ±1.73 °C 12)
≤ ±0.33 mV 13)
≤ ±0.0238 °C 7) 11) ≤ ±0.0224 °C 7) 11) ≤ ±0.0238 °C 7) 11) ≤ ±0.0191 °C 7) 11) ≤ ±0.0191 °C 7) 11) ≤ ±0.0338 °C 7) 11) ≤ ±0.0338 °C 7) 11) ≤ ±0.0500 °C 7) 12)
≤ ±0.0311 mV 7) 13)
1 sensor or 2 sensors (for further information, please refer to "designation of terminal connections") 5 kΩ each wire
internal compensation or external with Pt100, with thermostat or off
Other units e. g. °F and K possible Measuring deviation (input + output) at ambient temperature 23 °C ±3 K, without influence of lead resistance; example calculation see page 4 3) Temperature coefficient (input + output) per °C 4) x configurable between 10 … 1,000 5) Based on 3-wire Pt100, Ni100, 150 °C MV 6) Based on 150 °C MV 7) In ambient temperature range -40 … +85 °C 8) Based on a sensor with max. 5 kΩ 9) Rtotal: 10 ... 100 kΩ 10) Based on a potentiometer value of 50 %
11) 12) 13) 14)
Based on 400 °C MV with cold junction compensation error Based on 1000 °C MV with cold junction compensation error Based on measuring range 0 ... 1 V, 400 mV MV The transmitter can be configured below these limits but not recommended due to loss of accuracy. 15) Specification valid only for measuring range between 450 ... 1,820 °C bold: basic configuration italic: This sensors are not allowed at option SIL (T32.xS.xxx-S)
MV = Measuring value (temperature measuring values in °C)
Datasheet: T32.1S & T32.3S For pricing info, call 1-888-WIKA-USA or visit www.wika.com
