Type H Line Array Speaker System VP-1061/1121

VP-1241/1361

Without Front Grille

SR-H2L

SR-H2S

SR-H3L

SR-H3S

DESCRIPTION Type H line array speaker systems provide clear sound with directional focus on the listening area and a low degree of attenuation over distance, making them ideal for mainly vocal applications in medium-sized installations, even with highly reflective interior surfaces. Four Type H models are available, in close-proximity vertically arrayed short (9-speaker) or long (taller, 16-speaker) lengths, and linear or curved versions that create a uniform sound pressure coverage area. The linear versions emphasize extended transmission distance, while the curved models supply a 20-degree vertical directional angle, for shorter coverage distances. All models are energy-efficient and cost-effective, featuring slim, 84 mm (3.3”)-wide enclosures with high-quality 7 cm (2.8”) full-range speaker units, making them ideal for a wide range of interior installations.

FEATURES • Clear sound over distance The reflection-free and feedback-resistant speaker system’s line array configuration works together with Sync-Drive (Synchronous Nexus Control) technology to keep the audio in phase with its sources, for a linear sound source. • Enhanced audio dispersion and directivity Speaker design provides optimally precise vertical directivity focus, while front grille structure provides wider horizontal dispersion. Curved speaker models employ a hyper-clothoid concept array with enhanced vertical audio dispersion. • Space/Energy Efficient Design The speaker system’s line array configuration ensures higher output levels with less input power, and space-saving, cost-effective design features mean fully effective operation is possible without additional amplification equipment. • Customized Application Versatility Selection among four models ensures greater listening area customization. Up to two linear units can be connected for expanding the vertical coverage area. The slim and attractive design means that speakers can properly match the interior décor of the venue. • Easy and Appropriate Installation Thanks to optionally available mounting brackets, speakers may be easily placed in the most suitable location for their intended use, such as flat against a wall, on a wall at some horizontal and vertical angles, suspended from a ceiling, and mounted on a speaker stand. Removable input terminal connectors ensure easy and smooth hook-ups.

TOA Corporation SR-H Series 1/7

OPTIONS

SR-EP3

SR-WB3

SR-TB3

SR-FB3

SR-SA3

MT-S0301

Extension Plate

Wall Mounting Bracket

Wall Tilt Bracket

Flying Bracket

Stand Adapter

Matching Transformer

SR-WB3 Extension Plate

SR-FB3

SR-TB3

Wall Mounting Bracket

SR-EP3

Flying Bracket

Wall Tilt Bracket

SR-SA3 Stand Adapter

SPECIFICATIONS SR-H2L

Model No.

SR-H2S

SR-H3L

Enclosure

SR-H3S

Bass-reflex type

Power Handling Capacity

Continuous program: 180W

Continuous program: 360W

Rated Impedance

8Ω

Sensitivity

92dB (1W, 1m equivalent, measured at 4m)

90dB (1W, 1m equivalent, measured at 4m)

Frequency Response

80 – 18,000Hz (-10dB) 90 – 17,000Hz (-10dB) (when equalized at recommended parameters) (when equalized at recommended parameters)

110 – 18,000Hz (-10dB) 90 – 17,000Hz (-10dB) (when equalized at recommended parameters) (when equalized at recommended parameters)

Directivity Angle

Horizontal: 90° Vertical: 0° (within the range of speaker height)

Horizontal: 90° Vertical: 0° (within the range of speaker height)

Horizontal: 90° Vertical: 20°

7cm (2.8") cone-type × 9

Speaker Component Input Connector Finish

95dB (1W, 1m equivalent, measured at 8m)

92dB (1W, 1m equivalent, measured at 8m)

Horizontal: 90° Vertical: 20°

7cm (2.8") cone-type × 16 Removable input connector

Enclosure: Front grille:

MDF, white, urethane paint Punched steel plate, white, acrylic paint

Dimensions

84 (W) × 668.4 (H) × 115 (D)mm (3.31" x 26.31" x 4.53")

84 (W) × 663.4 (H) × 115 (D)mm (3.31" x 26.12" x 4.53")

84 (W) × 1186.4 (H) × 115 (D)mm (3.31" x 46.71" x 4.53")

84 (W) × 1177.2 (H) × 157 (D)mm (3.31" x 46.35" x 6.18")

Weight

4.4kg (9.7 lb)

4.2kg (9.26 lb)

7.6kg (16.75 lb)

7.9kg (17.42 lb)

Options

Extension plate: SR-EP3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Flying bracket: SR-FB3, Speaker stand adapter: SR-SA3, Matching transformer: MT-S0301, Digital processor: DP-0206

RECOMMENDED OPTIONAL SUBWOOFERS

FB-100

TOA Corporation SR-H Series 2/7

FB-120B

FB-120W

CHARACTERISTIC DIAGRAMS (SR-H2L) Polar Response

60°

vertical

horizontal

0° 10

0° 10 330°

30°

330°

30°

0

0

-10

-10 60°

300°

-20

300°

-20

-30

-30

-40

-40 270°

90°

90° -40 -30

-30 240°

-20

120°

-20

120°

240°

-10

0

0

0

0

150°

210°

210° 10 180°

500Hz 400Hz 315Hz

150°

330°

330° 0 -10

60°

300°

-20

300°

-20

60°

-30 -40

-40 -30

90° -40

-40

-30

-30

-20

120°

240°

270°

270° 90°

-30

240°

-20

120°

-20

120°

240°

-10

-10

-10

-10

0

0

0

0

150°

150°

210° 10 180°

210° 10 180°

2000Hz 1600Hz 1250Hz

0° 10

150°

330°

330° 0 -10

60°

300°

-20

300°

-20

-30

60°

-40

-40

270° -40

-40

-30

-20

120°

270° 90°

-30 240°

-40

Vertical

-40

-30

240°

-30

-20

120°

240°

-20

120°

-10

-10

-10

-10

0

0

0

0

150°

150°

210° 10 180°

210° 10 180°

8000Hz 6300Hz 5000Hz

150° 16000Hz 12500Hz 10000Hz

300°

-20 -30

90°

-40

60°

300°

-40 270°

90°

-20

0 -10

-30

270° 90°

4000Hz 3150Hz 2500Hz

330°

30°

0 -10 -20

-30

210°

0° 10 330°

30°

240°

10 180°

2000Hz 1600Hz 1250Hz

0° 10

30°

0 -10

150°

210° 10 180°

4000Hz 3150Hz 2500Hz

0° 10

30°

300°

-20

-40

90° -40

60°

300°

270°

270°

-20

0 -10

-30

-40

-40 90°

1000Hz 800Hz 630Hz

330°

30°

0 -10 -20

-30

-30

210°

0° 10 330°

30°

240°

10 180°

500Hz 400Hz 315Hz

0° 10

30°

0 -10

150°

210° 10 180°

1000Hz 800Hz 630Hz

0° 10

30°

120°

270°

270°

-10

0° 10

60°

-40

-40

-10

10 180°

120°

-30

-10

150°

300°

-20

-40

-20

120°

240°

60°

300°

-30

-30

-20

0 -10

-20

-40

-30

330°

30°

90°

-40

60°

60°

10 330°

0 -10

270° 90°

120°

0° 10 30°

150°

210° 10 180°

Horizontal

240°

210° 10 180°

8000Hz 6300Hz 5000Hz

16000Hz 12500Hz 10000Hz

Frequency Response [dB] 110 100 90 80 70 60 50 20

50

100

500

1k

Frequency — SPL

5k 10k DSP Filter ON DSP Filter OFF

20k [Hz]

Measurement distance: 4m

200

84 (3.31")

Bass reflex duct (on the top surface only)

115 (4.53")

40 (1.57") Input connector MT-D0301 (option) mountin panel

100

Front View 10

668 (26.31")

50

Side View

Rear View

5

Mounting screw (M5)

1 20

unit: mm 50

100

500

1k

Frequency — Beamwidth

5k

10k Hor. Ver.

20k [Hz]

Measurement distance: 4m

TOA Corporation SR-H Series 3/7

Bottom View

336 (13.23")

Top View

250 (9.84")

[deg]

41.2 (1.62")

APPEARANCE AND DIMENSIONAL DIAGRAM

Beamwidth vs. Frequency

This recessed part on the bottom surface does not function as a bass reflex duct.

CHARACTERISTIC DIAGRAMS (SR-H2S) Polar Response

60°

vertical

horizontal

0° 10

0° 10 330°

30°

330°

30°

0

0

-10

-10 60°

300°

-20

300°

-20

-30

-30

-40

-40

60°

330°

60°

300°

-20

-30

-40

-40

60°

0

60°

-10

0

0

150° 4000Hz 3150Hz 2500Hz

300°

60°

-40

0 -10

-30 -40 270°

270° 90°

90°

-40

-40

-30

-30

-20

120°

240°

-20

120°

240°

-20

120°

-10

-10

-10

-10

0

0

0

0

150°

150°

210° 10 180°

210° 10 180°

8000Hz 6300Hz 5000Hz

150° 16000Hz 12500Hz 10000Hz

300°

-20

-40

Vertical

-30 240°

60°

300°

-20

-40

-30

330°

30°

270° 90°

-20

330° 0 -10

-30

270° -40

4000Hz 3150Hz 2500Hz

0° 10

30°

-30

-40

210° 10 180°

2000Hz 1600Hz 1250Hz

0° 10

-20

240°

150°

210° 10 180°

330° 0 -10

60°

-20

120°

240°

0

30°

90°

120°

-20 -10

0

300°

-30

-30 120°

210°

-30

270° -40

-10

-10 -20

-40 90°

0° 10 330°

30°

-30

270°

240°

10 180°

2000Hz 1600Hz 1250Hz

0° 10

300°

-20

-40

150°

210° 10 180°

60°

300°

-40

-20

120°

240°

-10

150°

0 -10

90°

-30

-20

330°

30°

330° 0 -10 -20

-40

-30 120°

1000Hz 800Hz 630Hz

0° 10

270° 90°

-40

210° 10 180°

500Hz 400Hz 315Hz

-30

270° 90°

150°

210°

30°

300°

-20

-30

0

0 10 180°

330° 0

240°

-10

0° 10

30°

-10

-20

120°

240°

150° 1000Hz 800Hz 630Hz

0° 10

0

-30

-20

120°

210°

-10

270° -40

-10

10 180°

500Hz 400Hz 315Hz

0° 10

60°

-40 90°

-30 240°

150°

210°

30°

-30

270°

0

0

300°

-20

-40

-10

10 180°

60°

300°

-40

-20

120°

240°

-10

150°

-10

90°

-30

-20

0

-10 -20

-40

-30

330°

30°

-30

90° -40

120°

330° 0

270°

270° 90°

0° 10

0° 10 30°

150°

210° 10 180°

Horizontal

240°

210° 10 180°

8000Hz 6300Hz 5000Hz

16000Hz 12500Hz 10000Hz

Frequency Response [dB] 110 100 90 80 70 60

20

50

100

500

1k

Frequency — SPL

5k 10k DSP Filter ON DSP Filter OFF

20k [Hz]

Measurement distance: 4m

[deg]

Bass reflex duct 40 (1.57") Input connector MT-D0301 (option) mountin panel

100

Side View

Rear View

20°

10

663.4 (26.12")

Front View

ity angle Directiv

50

Mounting screw (M5)

256 (10.08")

115 (4.53")

250 (9.84")

Top View 84 (3.31")

200

41.2 (1.62")

APPEARANCE AND DIMENSIONAL DIAGRAM

Beamwidth vs. Frequency

5

Bottom View 1 20

unit: mm 50

100

500

1k

Frequency — Beamwidth

5k

10k Hor. Ver.

20k [Hz]

Measurement distance: 4m

TOA Corporation SR-H Series 4/7

CHARACTERISTIC DIAGRAMS (SR-H3L) Polar Response

60°

vertical

horizontal

0° 10

0° 10 330°

30°

330°

30°

0

0

-10

-10 60°

300°

-20

300°

-20

-30

-30

-40

-40 270°

90°

0° 10

60°

-40

-30 240°

-30

-20

120°

-20

120°

240°

-10

-10

0

0

0

0

150°

210°

210° 10 180°

500Hz 400Hz 315Hz

330°

30°

150°

330° 0 -10

60°

300°

-20

210°

300°

-20

60°

330°

30°

0

0

-10

-10 60°

300°

-20

-30

-30

-30

-40

-40

-40

-40

270°

270°

-10

0

0

-20

120°

330°

330° 0

60°

300°

-20

210° 10 180°

2000Hz 1600Hz 1250Hz

0° 10

30°

-10

150°

210° 10 180°

0° 10

0

0

150° 4000Hz 3150Hz 2500Hz

60°

330°

30°

0

0

-10

-10 300°

-20

60°

-30

-30

-30

-40

-40

-40

-40

270°

270°

Vertical

270°

90°

90°

-40

240°

-10

0

0

240°

240°

-20

120°

0

150° 16000Hz 12500Hz 10000Hz

150°

210° 10 180°

Horizontal

240°

-10

0 210°

10 180°

8000Hz 6300Hz 5000Hz

-30

-20

120°

-10

150°

210° 10 180°

-40

-30

-20

120°

-10

150°

-40

-30

-20

270° 90°

-40

-30

300°

-20

-30

90°

4000Hz 3150Hz 2500Hz

0° 10 330°

30°

300°

-20

240°

-10

0

210°

-10

-20

120°

240°

-10

10 180°

2000Hz 1600Hz 1250Hz

0° 10 30°

240°

150°

210° 10 180°

-30

-30

-20

120°

240°

-10

-40

-40

-30

-20

150°

90°

90° -40

-30

270°

270°

90° -40

300°

-20

-30

90°

1000Hz 800Hz 630Hz

0° 10 330°

30°

240°

10 180°

500Hz 400Hz 315Hz

0° 10

30°

0 -10

150°

210° 10 180°

1000Hz 800Hz 630Hz

0° 10

0° 10

120°

270° 90°

-10

10 180°

60°

-40 270°

-10

150°

120°

-30

-40

-20

300°

-20

-40

-30 120°

240°

60°

300°

90°

-30

60°

-10

-20

-40

-20

0

-10

270°

-40

330°

30°

0

-30

90°

120°

0° 10 330°

30°

210° 10 180°

8000Hz 6300Hz 5000Hz

16000Hz 12500Hz 10000Hz

Frequency Response [dB] 110 100 90 80 70 60 50 20

50

100

500

1k

Frequency — SPL

5k 10k DSP Filter ON DSP Filter OFF

20k [Hz]

Measurement distance: 8m

Top View 115 (4.53")

200

Bass reflex duct (on the top surface only) 40 (1.57") Input connector MT-D0301 (option) mountin panel

100

250 (9.84")

Side View

Rear View 250 (9.84")

Front View

10

1186.4 (46.71")

50

5

1 20

50

100

500

1k

Frequency — Beamwidth

5k

10k Hor. Ver.

20k [Hz]

Measurement distance: 8m

TOA Corporation SR-H Series 5/7

Mounting screw (M5)

unit: mm

Bottom View

302 (11.89")

84 (3.31")

302 (11.89")

[deg]

41.2 (1.62")

APPEARANCE AND DIMENSIONAL DIAGRAM

Beamwidth vs. Frequency

This recessed part on the bottom surface does not function as a bass reflex duct.

CHARACTERISTIC DIAGRAMS (SR-H3S) Polar Response

60°

vertical

horizontal

0° 10

0° 10 330°

30°

330°

30°

0

0

-10

-10 60°

300°

-20

300°

-20

-30

-30

-40

-40

0 210°

60°

-10

0

0

0

150°

0 -10 60°

300°

-20

60°

-40 -30

-30 240°

-20

120°

-20

120°

240°

-10

-10

-10

0

0

0

0

150°

210° 10 180°

210° 10 180°

2000Hz 1600Hz 1250Hz

330°

30°

150° 10 180°

330° 0 -10

60°

300°

-20

300°

-20

60°

270°

270°

-40 270°

-40

-40

-30

-20

120°

270° 90°

-30 240°

240°

-30

-20

120°

240°

-20

120°

-10

-10

-10

-10

0

0

0

0

150°

150°

210° 10 180°

210° 10 180°

8000Hz 6300Hz 5000Hz

150° 16000Hz 12500Hz 10000Hz

300°

-20 -30

90° -40

-30

60°

300°

-40

Vertical

90° -40

-20

0 -10

-30

-40

-40 90°

4000Hz 3150Hz 2500Hz

330°

30°

0 -10 -20

-30

-30

210°

0° 10 330°

30°

240°

10 180°

2000Hz 1600Hz 1250Hz

0° 10

30°

0 -10

150°

210°

4000Hz 3150Hz 2500Hz

0° 10

0° 10

120°

90° -40

-20

120°

240°

270°

270°

-10

150°

60°

-40

-40

-30

-20

300°

-20 -30

90° -40

-30

60°

300°

270° 90°

120°

0 -10

-30

270° -40

1000Hz 800Hz 630Hz

330°

30°

0 -10 -20

-40

-40

210°

0° 10 330°

30°

240°

10 180°

500Hz 400Hz 315Hz

0° 10

-30

90°

150°

210° 10 180°

1000Hz 800Hz 630Hz

330°

0 -10 300°

-20

-10

210°

-30

-30 120°

240°

-10

30°

330°

270° -40

-20

120°

0° 10

-20

-40 90°

-30

10 180°

500Hz 400Hz 315Hz

0° 10 30°

-30

-40

240°

150°

300°

-20

-40

-20

-10

60°

300°

90°

120°

240°

10 180°

-10

-30

-30

-20

0

-10 -20

-40

-30

150°

60°

330°

30°

270°

90° -40

120°

0° 10 330°

0

270°

270° 90°

0° 10 30°

150°

210° 10 180°

Horizontal

210° 10 180°

8000Hz 6300Hz 5000Hz

240°

16000Hz 12500Hz 10000Hz

Frequency Response [dB] 110 100 90 80 70 60 50 20

50

100

500

1k

Frequency — SPL

5k 10k DSP Filter ON DSP Filter OFF

20k [Hz]

Measurement distance: 8m

[deg]

Top View 84 (3.31")

Bass reflex duct 157 (6.18")

40 (1.57")

41.2 (1.62")

APPEARANCE AND DIMENSIONAL DIAGRAM

Beamwidth vs. Frequency

Input connector

200

264 (10.39")

MT-D0301 (option) mountin panel 100

250 (9.84") Rear View

20°

254 (10")

5

Mounting screw (M5) 1 20

50

100

500

1k

Frequency — Beamwidth

5k

10k Hor. Ver.

20k [Hz]

Measurement distance: 8m

TOA Corporation SR-H Series 6/7

Bottom View

250 (9.84")

Side View

ity angle Directiv

Front View

10

1177.2 (46.35")

50

unit: mm

ARCHITECTURAL AND ENGINEERING SPECIFICATIONS SR-H2L

SR-H3L

The [long throw] speaker shall be a slim profile design (84 mm in width). The speaker shall consist of nine direct-radiating 7 cm (2.8") cone-type drivers arranged in a vertical line and housed in a ported enclosure. The speaker shall have a removable input connector.

The [long throw] speaker shall be a slim profile design (84 mm in width). The speaker shall consist of 16 direct-radiating 7 cm (2.8") cone-type drivers arranged in a vertical line and housed in a ported enclosure. The speaker shall have a removable input connector.

Its unique aperture front grille structure shall enhance the horizontal frequency vs. beam width response for more focused horizontal dispersion. The horizontal coverage shall be 90 degrees. The vertical coverage shall be 0 degrees. Extending the height of the cylinder-section which defines the coverage area shall be possible by stacking this model with a longer model.

Its unique aperture front grille structure shall enhance the horizontal frequency vs. beam width response for more focused horizontal dispersion. The horizontal coverage shall be 90 degrees. The vertical coverage shall be 0 degrees. Extending the height of the cylinder-section which defines the coverage area shall be possible by stacking this model with another same model or a shorter model.

The speaker shall meet the following performance criteria. Power handling: 180 W continuous program. Frequency response (10 dB below rated sensitivity, with recommended equalization): 80 Hz to 18 kHz. Sensitivity (1 W, 1 m equivalent, measured at 4 m): 92 dB. Impedance: 8 ohms nominal. When the optional line matching transformer model MT-S0301 is installed, the available power taps shall be: for 100 V line applications :10 and 30 W (330 and 1k ohms respectively) ; for 70 V line application: 5, 15 and 30 W (170, 330 and 1k ohms respectively).

The speaker shall meet the following performance criteria. Power handling: 360 W continuous program. Frequency response (10 dB below rated sensitivity, with recommended equalization): 110 Hz to 18 kHz. Sensitivity (1 W, 1 m equivalent, measured at 8 m): 95 dB. Impedance: 8 ohms nominal. When the optional line matching transformer model MT-S0301 is installed, the available power taps shall be: for 100 V line applications :10 and 30 W (330 and 1k ohms respectively) ; for 70 V line application: 5, 15 and 30 W (170, 330 and 1k ohms respectively).

The speaker enclosure shall be made of medium density fiberboard and finished with white urethane paint. The speaker grille shall be made from a single punched steel plate and finished with white acrylic paint. The dimensions (W × H × D) shall be 84 × 668.4 × 115 mm (3.31" × 26.31" × 4.53") and weight shall be 4.4 kg (9.7 lb). The mounting screws shall be equipped on the rear side of the product to prevent the screws from being prominent. Available brackets for flying, and for wall, ceiling and stand mounting shall be made of steel.

The speaker enclosure shall be made of medium density fiberboard and finished with white urethane paint. The speaker grille shall be made from a single punched steel plate and finished with white acrylic paint. The dimensions (W × H × D) shall be 84 × 1186.4 × 115 mm (3.31" × 46.71" × 4.53") and weight shall be 7.6 kg (16.75 lb). The mounting screws shall be equipped on the rear side of the product to prevent the screws from being prominent. Available brackets for flying, and for wall, ceiling and stand mounting shall be made of steel.

The loudspeaker shall be TOA model SR-H2L. The matching transformer shall be TOA model MT-S0301. The extension plate shall be TOA model SR-EP3. The flying bracket shall be TOA model SR-FB3. The wall tilt bracket shall be TOA model SR-TB3. The wall mounting bracket shall be TOA model SR-WB3. The stand adapter shall be TOA model SR-SA3.

The loudspeaker shall be TOA model SR-H3L. The matching transformer shall be TOA model MT-S0301. The extension plate shall be TOA model SR-EP3. The flying bracket shall be TOA model SR-FB3. The wall tilt bracket shall be TOA model SR-TB3. The wall mounting bracket shall be TOA model SR-WB3. The stand adapter shall be TOA model SR-SA3.

SR-H2S

SR-H3S

The [short throw] speaker shall be a slim profile design (84 mm in width). The speaker shall consist of nine direct-radiating 7 cm (2.8") cone-type drivers arranged in a vertical line and housed in a ported enclosure. The speaker shall have a removable input connector.

The [short throw] speaker shall be a slim profile design (84 mm in width).The speaker shall consist of 16 direct-radiating 7 cm (2.8") cone-type drivers arranged in a vertical line and housed in a ported enclosure. The speaker shall have a removable input connector.

Its unique aperture front grille structure shall enhance the horizontal frequency vs. beam width response for more focused horizontal dispersion. The horizontal coverage shall be 90 degrees. The vertical coverage shall be 20 degrees.

Its unique aperture front grille structure shall enhance the horizontal frequency vs. beam width response for more focused horizontal dispersion. The horizontal coverage shall be 90 degrees. The vertical coverage shall be 20 degrees.

The speaker shall meet the following performance criteria. Power handling: 180 W continuous program. Frequency response (10 dB below rated sensitivity, with recommended equalization): 90 Hz to 17 kHz. Sensitivity (1 W, 1 m equivalent, measured at 4 m): 90 dB. Impedance: 8 ohms nominal. When the optional line matching transformer model MT-S0301 is installed, the available power taps shall be: for 100 V line applications :10 and 30 W (330 and 1k ohms respectively) ; for 70 V line application: 5, 15 and 30 W (170, 330 and 1k ohms respectively).

The speaker shall meet the following performance criteria. Power handling: 360 W continuous program. Frequency response (10 dB below rated sensitivity, with recommended equalization): 90 Hz to 17 kHz. Sensitivity (1 W, 1 m equivalent, measured at 8 m): 92 dB. Impedance: 8 ohms nominal. When the optional line matching transformer model MT-S0301 is installed, the available power taps shall be: for 100 V line applications :10 and 30 W (330 and 1k ohms respectively) ; for 70 V line application: 5, 15 and 30 W (170, 330 and 1k ohms respectively).

The speaker enclosure shall be made of medium density fiberboard and finished with white urethane paint. The speaker grille shall be made from a single punched steel plate and finished with white acrylic paint. The dimensions (W × H × D) shall be 84 × 663.4 × 115 mm (3.31" × 26.12" × 4.53") and weight shall be 4.2 kg (9.26 lb). The mounting screws shall be equipped on the rear side of the product to prevent the screws from being prominent. Available brackets for flying, and for wall, ceiling and stand mounting shall be made of steel.

The speaker enclosure shall be made of medium density fiberboard and finished with white urethane paint. The speaker grille shall be made from a single punched steel plate and finished with white acrylic paint. The dimensions (W × H × D) shall be 84 × 1177.2 × 157 mm (3.31" × 46.35" × 6.18") and weight shall be 7.9 kg (17.42 lb). The mounting screws shall be equipped on the rear side of the product to prevent the screws from being prominent. Available brackets for flying, and for wall, ceiling and stand mounting shall be made of steel.

The loudspeaker shall be TOA model SR-H2S. The matching transformer shall be TOA model MT-S0301. The flying bracket shall be TOA model SR-FB3. The wall tilt bracket shall be TOA model SR-TB3. The wall mounting bracket shall be TOA model SR-WB3. The stand adapter shall be TOA model SR-SA3.

The loudspeaker shall be TOA model SR-H3S. The matching transformer shall be TOA model MT-S0301. The flying bracket shall be TOA model SR-FB3. The wall tilt bracket shall be TOA model SR-TB3. The wall mounting bracket shall be TOA model SR-WB3. The stand adapter shall be TOA model SR-SA3.

TOA Corporation www.toa.jp TOA Corporation SR-H Series 7/7

Specifications are subject to change without notice. (0908) 833-52-404-30 u