THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories
TRAILER HARDWARE & ACCESSORIES
There are many products available to facilitate the construction, maintenance and usage of any piece of towed equipment with ease. Covering building parts, body fittings and general hardware, through to regular spares, liquid handling, load restraint and storage, this comprehensive section will provide your ultimate guide.
Contents
Electric Winches
192-195
Lynch Pins & Shackles
Hand Winches
196-197
‘U’ Bolts
215
Load Restraint
198-199
Trailer Covers
216
Loadbinders, Luggage Straps Body Building Parts Gas Struts Dropside & Tailgate Fittings Plastic Tool Boxes
190
200 201-202 203 204-206 207
Flooring & Floor Protection
208-209
Bolts, Nuts & Washers
210-212
Pumps
213-214
217-218
Bowser Parts
219
Roller Breaker Parts
219
Boat Trailer Parts
220-222
Winch Posts
222
Rubber Blocks
223
call 01206 795949 email
[email protected] www.ate-uk.com
191
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories
Trailer Hardware & Accessories 6000lb Spartan 12/24V Electric Winch
Electric Winches
These Spartan Series winches are tough, reliable and durable, and offer excellent value for money without compromising build quality. The extended drum supports allow it to carry up to 40m of 7.2mm cable. Optional synthetic rope is also available.
A very useful device when trying to load or recover single handed. The Warrior range, which is very comprehensive, cover professional winches for recovery operators through to small leisure quality winches to mount on boat trailers or even ATV’s.
• 40m Galvanised Steel Cable* • 3m Remote Handset
Standard Accessories
• Heavy Duty Steel Roller Fairlead
• 9.2mm x 26m Steel Cable
• Heavy Duty Battery Leads
• 3m Remote Handset
• Stainless Steel Mounting Hardware
• Heavy Duty Stainless Steel Fairlead
• Clevis Hook
• Heavy Duty Battery Leads
Outstanding Features
• Isolation Switch
Outstanding Features
• Stainless Steel Mounting hardware
• Power in and Power out
• Built In Wireless remote (12V only)
• High Torque 1.95hp Motor
• 5/16 hook
• H D Waterproof Contactors
Standard Accessories
Viking Worm Gear Winches offer the ultimate in precision and control. The worm gear design provides excellent load reversing protection. Worm Gear winches are designed with fewer moving parts and thus provide greater handling of shock loads as well as fewer wear points.
• Weather Sealed High Performance Motor • Heavy Duty 3 Stage Gearbox • Heavy Duty Drum Supports
• 6.4mm x 14.5m Steel Cable • 3m Remote Handset • Heavy Duty Roller Fairlead
• Mounting Hardware • 3/8 Hook • *ATV remote available
• Full Steel Planetary Gearing
Outstanding Features
• Full Steel Planetary Gearing
• All Brass (no corrosion) Series Wound Motor
• Full Load Holding Brake
• Double Sealed Motor
Standard Accessories
• Every winch is 100% Load Tested
• Sealed Waterproof Contactor
• 10.3mm x 29m Wire Rope
• Chip Resistant Gloss Paint Finish
• Steel Contactor Cover for Added Protection
• Mount Plate as Standard • Full Load Holding Brake • Can fit Tow Ball Mount
• Double Sealed Drum (Gearbox/Motor)
• Heavy Duty 4 Way Roller Fairlead 12V comes with wireless remote handset - 24V wireless remote available separately.
• Hand Remote
Standard Accessories
• Mounting Plate
• Weather Sealed Solenoids
• Fitting hardware
Latest addition to the range, these high quality winches featuring three stage planetary gearing ensure they are some of the quietest and smoothest winches on the market. The silky smooth performance and the full load holding brake make it the perfect solution for high spec applications.
• Heavy Duty Battery Leads
These are winches for the true professional and will handle the most demanding applications. All models are supplied with a mount plate as standard. Meets EN14492 standard.
• Mount Plate
C4500 EWX 4500lb 12V/24V Electric Winch
Superb high specification winch. Ideal for recovery and 4x4 applications. Outstanding features include high quality wound double sealed motor with brass fittings, heavy duty waterproof contactors, double sealed drum with maintenance free bearings and quiet, efficient full steel planetary gearing. Supplied with stainless steel roller fairlead and fittings as standard. The 12V version comes complete with Heavy Duty integrated wireless remote. The 24v high speed version is capable of a line Speed of 65 ft/ min and includes a huge 6.5 hp high quality double sealed motor. Synthetic rope option available.
With great performance, outstanding features included as standard, & backed by a limited Lifetime Warranty, the Spartan range is a must for all serious enthusiasts.
12000lb Viking Electric Worm Drive Winch
S9500 Samurai 9500lb 12V/24V Electric Winch
12V comes with wireless remote handset - 24V wireless remote available separately.
• Sealed 3 Stage Planetary Gears • Stainless Steel 4 Way Fairleads
12V comes with wireless remote handset - 24V wireless remote available separately.
• Integrated Wireless Remote (12V only)
Outstanding Features • Robust worm gear – provides load reversing protection • Heavy Duty Industrial Design • Water Resistant Contactors • Mount Plate Included • EN14492 Compliant
WINCH ATTRIBUTES
WINCH ATTRIBUTES
WINCH ATTRIBUTES
WINCH ATTRIBUTES
Part No.
32.0001
32.0023
Part No.
32.0004
32.0005
Part No.
32.0008
32.0009
Part No.
32.0014
32.0015
Model No.
120WS12
120WS24
Model No.
60SPS12
60SPS24
Model No.
950SS12
950SS24
Model No.
450ES12
450ES24
Rated Line Pull
12000lbs (5448kg)
12000lbs (5448kg)
Rated Line Pull
6000lbs (2727kg)
6000lbs (2727kg)
Rated Line Pull
9500lbs (4500kg)
9500lbs (4500kg)
Rated Line Pull
4500lbs (2041kg)
4500lbs (2041kg)
Motor
12v 7.2hp / 5.4kw
24v 10hp / 7.6kw
Motor
12v 4.5hp / 3.4kw
24v 4.5hp / 3.4kw
Motor
12v 4.6hp / 3.2kw
24v : 6.5hp / 4.5kw
Motor
12v 1.95hp / 1.37kw
24v 1.95hp / 1.37kw
Cable Size
10.3mm x 29m
10.3mm x 29m
Cable Size
7.2mm x 40m
7.2mm x 40m
Cable Size
9.2mm x 26m
7.2mm x 40m
Cable Size
6.4mm x 14.5m
6.4mm x 14.5m
CALL FOR INFORMATION
CALL FOR INFORMATION
CALL FOR INFORMATION
CALL FOR INFORMATION
01206 795949
01206 795949
01206 795949
01206 795949
192
Call by 3.30pm for next day delivery on all stock lines...
call 01206 795949 email
[email protected] www.ate-uk.com
193
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories
Trailer Hardware & Accessories
C3500A 3500lb 12V/24V Electric Winch
C2500 12V Electric Winch
S17500 Samurai 17500lb 12V/24V Electric Winch
The C3500 is ideal for large ATV’s and small trailers. A huge 1.95hp motor, heavy duty steel gearing, heavy duty clutch and heavy duty waterproof contactors ensure the ultimate in reliability and performance. Complete with mount plate for flatbed mounting or alternatively it can be fitted to a portable tow ball attachment. ATV handle bar remote available in lieu of the standard remote.
Heavy duty ATV and utility winch. Unique clutch, heavy duty steel gearing and heavy duty waterproof contactors ensures maximum performance in all conditions. Supplied complete with mount plate for flatbed mounting or alternatively can be fitted to portable tow ball attachment. ATV handle bar remote is available in lieu of standard remote.
The best £ for lb winches on the market. Outstanding features includes a huge 7.0 hp high quality double sealed motor with brass fittings, heavy duty waterproof contactors and double sealed drum on maintenance free bearings, quiet, fully sealed efficient full steel planetary gearing. Complete with stainless steel roller fairlead and fittings as standard.
Standard Accessories
Standard Accessories
Standard Accessories
• 5.4mm x 12.8m Steel Cable
• 4.8mm x 14m Steel Cable
• 3m Remote Handset
• *3m Remote Handset
• *3m Remote Handset
• Heavy Duty Stainless Steel Fairlead
• Heavy Duty Roller Fairlead
• Heavy Duty Roller Fairlead
• Heavy Duty Battery Leads
• Heavy Duty Battery Leads
• Heavy Duty Battery Leads
• Isolation Switch
• 3 Tonne Pulley Block
• 3 Tonne Pulley Block
• Stainless Steel Mounting Hardware
• Mounting Plate
• Mounting Plate
• Mounting Hardware
• Mounting Hardware
• 1/4 Hook
• 1/4 Hook
• *ATV remote available
• *ATV remote available
Loading ramps are available to special order only. Please enquire regarding sizes and prices.
Pulley Block
Outstanding Features • All Brass (no corrosion) Series Wound Motor • Double Sealed Motor • Sealed Waterproof Contactor
Outstanding Features
• Steel Contactor Cover for Added Protection
Outstanding Features
• Power in and Power out
• Double Sealed Drum (Gearbox/Motor)
• Power in and Power out
• Quiet Efficient 1.0 hp Motor
• Sealed 3 Stage Planetary Gears
• Quiet Efficient 1.95 hp Motor
• New Heavy Duty Clutch
• Stainless Steel 4 Way Fairleads
• New Heavy Duty Clutch
• Full Steel Planetary Gearing
• Full Steel Planetary Gearing
• H D Waterproof Contactors
• H D Waterproof Contactors
• Mount Plate as Standard
• Mount Plate as Standard
• Pulley Block as Standard
• Pulley Block as Standard
• Suitable for tow ball mount
32.2059 To Suit 6mm/8mm Wire Rope (4000kg) 32.2061 To Suit 10mm/14mm Wire Rope (13600kg)
• Suitable for tow ball mount Complete with wireless remote handset.
12V comes with wireless remote handset - 24V wireless remote available separately.
12V comes with wireless remote handset - 24V wireless remote available separately.
Armortek Synthetic Winch Rope Armortek synthetic winch rope is made with high lightweight strength HMPE fibre. It undergoes a unique pre stretching process and is coated with a special abrasion resistant coating to enable maximum pull and the ultimate endurance. UV Stabilisation gives the rope long and safe working life and as it is not affected by oil or water it's just as strong whether used in dry, wet, cold or humid conditions. Armortek stretches very little (3 - 4 % at breaking point) and is very safe to use. It stores very little energy and hence no lash backs in the unlikely event of breaking. Benefits Of Using Armortek Synthetic Winch Rope:
WINCH ATTRIBUTES
WINCH ATTRIBUTES
WINCH ATTRIBUTES
Part No.
32.0012
32.0013
Part No.
32.0019
Part No.
32.0027
32.0028
Model No.
350AS12
350AS24
Model No.
250AS12
Model No.
175SS12
175SS24
Rated Line Pull
3500lbs (1588kg)
3500lbs (1588kg)
Rated Line Pull
2500lbs(1134kg)
Rated Line Pull
17,500lbs (7938kg)
17,500lbs (7938kg)
Motor
12v 1.95hp / 0.37kw
24v 1.95hp / 0.37kw
Motor
12v 1.35hp / 0.95kw
Motor
12v : 7.0hp / 4.9kw
12v : 7.0hp / 4.9kw
Cable Size
5.4mm x 12.8m
5.4mm x 12.8m
Cable Size
4.8mm x 14m
Cable Size
12mm x 26m
12mm x 26m
CALL FOR INFORMATION
CALL FOR INFORMATION
CALL FOR INFORMATION
01206 795949
01206 795949
01206 795949
194
Call by 3.30pm for next day delivery on all stock lines...
• Weighs 83% less than wire. • Rated at 70 percent stronger than wire. • Armortek floats, wire doesn’t. • Coated to prevent abrasion. • No wire splinters to worry about. • No loss of strength when overlapped on winch drum. • Unlike wire, will not whiplash if broken. • Comes pre-stretched and heat set. • Available in a number of lengths.
call 01206 795949 email
[email protected] www.ate-uk.com
195
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories
Trailer Hardware & Accessories 1400lb Hand Winch Single Speed
Hand Winches
Dutton Lainson braked winches are suitable for many lifting and lowering applications. Self-locking brake winches provide extra safety and control while the automatic friction brake supplies constant, positive holding action and prevents a runaway load. The brake is fully automatic and the load remains in position at any time the handle is released.
600lb Hand Winch Single Speed Winch Spec
For Luggage Straps see page 200
196
Part No.
32.1006
Model No.
DL1402A
Base Size
13 x 9cm
Gear Ratio
4.4
Minimum Operating Load
22 KG
Rated Capacity
635 KG
Reel Capacity
14.2m, 6mm dia
Reversible Ratchet
Yes
Strap Length Capacity
31FT
Type
Medium Duty
3mm x 7.5m 4mm x 7.5m 4mm x 15m 5mm x 7.5m 5mm x 15m 6mm x 7.5m 6mm x 15m 7mm x 7.5m 7mm x 15m 8mm x 15m
540kg 960kg 960kg 1500kg 1500kg 2160kg 2160kg 3150kg 3150kg 4110kg
1800lb Hand Winch Single Speed Winch Spec
Part No.
32.1003
Part No.
32.1008
Model No.
DL600A
Model No.
DL1802A
Base Size
10 x 9cm
Base Size
14 x 12cm
Gear Ratio
3.2
Gear Ratio
5.4
Minimum Operating Load
16 KG
Minimum Operating Load
28 KG
Rated Capacity
272 KG
Rated Capacity
817 KG
Reel Capacity
19.2m, 4mm dia
Reel Capacity
17.9m, 7mm dia
Reversible Ratchet
Yes
Reversible Ratchet
-
Strap Length Capacity
16FT
Strap Length Capacity
38FT
Type
Standard Duty
Type
Medium Duty
900lb Hand Winch Single Speed Winch Spec
2000lb Hand Winch Two Speed
Winch Strap C/W Snap Hook 32.2027 32.2028 32.2029 32.2062
Winch Spec
Part No.
32.1004
Part No.
32.1009
Model No.
DL900A
Model No.
DL2000A
Base Size
10 x 9cm
Base Size
16 x 12cm
Gear Ratio
3.2
Gear Ratio
12.4
Minimum Operating Load
16 KG
Minimum Operating Load
28 KG
Rated Capacity
408 KG
Rated Capacity
907 KG
Reel Capacity
10.9m, 5mm dia
Reel Capacity
17.9m, 7mm dia
Reversible Ratchet
-
Reversible Ratchet
Yes
Strap Length Capacity
-
Strap Length Capacity
38FT
Type
Standard Duty
Type
Heavy Duty
1100lb Hand Winch Single Speed
Information
32.2017 32.2018 32.2019 32.2020 32.2021 32.2022 32.2023 32.2024 32.2025 32.2026
Winch Spec
Where cost is an issue or circumstances do not permit, hand winches provide a suitable answer for moving heavy and awkward items. The Dutton Lainson range manufactured in the USA are engineered with mechanical advantages to keep handle effort low for smooth easy operation. Some models are available with two speeds. The winches are zinc plated for superior corrosion resistance making them especially suitable for marine applications. High carbon SAE 1050 steel gears are used to resist wear and last longer.
Information
Winch Cables
2000kg 2000kg 2000kg 3000kg
1500lb-2500lb Hand Winch Friction Braked
Winch Spec
Winch Spec
Part No.
32.1005
Part No.
32.1016
Part No.
32.1017
Model No.
DL1100A
Model No.
DLB1500AG
Model No.
DLB2500AG
Base Size
13 x 9cm
Base Size
14 x 12cm
Base Size
18 x 12cm
Gear Ratio
3.7
Gear Ratio
5.4
Gear Ratio
17.3
Minimum Operating Load
22 KG
Minimum Operating Load
34 KG
Minimum Operating Load
80 KG
Rated Capacity
499 KG
Rated Capacity
680 KG
Rated Capacity
1135 KG
Reel Capacity
22.2m, 5mm dia
Reel Capacity
15.1m, 6mm dia
Reel Capacity
6.7m, 8mm dia
Reversible Ratchet
-
Reversible Ratchet
-
Reversible Ratchet
-
Strap Length Capacity
-
Strap Length Capacity
-
Strap Length Capacity
-
Type
Standard Duty
Type
Medium Duty
Type
Medium Duty
Call by 3.30pm for next day delivery on all stock lines...
15’ Winch Strap 20’ Winch Strap 25’ Winch Strap 20’ Winch Strap
Winch Spec
call 01206 795949 email
[email protected] www.ate-uk.com
197
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories
Trailer Hardware & Accessories Towmate Ergonomic Ratchet Straps
Load Restraint
Towmate Ergonomic Ratchet Straps are manufactured to the same high specifications as our standard Towmate range and are TUV & GS approved.
Keeping your load safe and secure whilst travelling on busy roads is essential and is indeed a legal requirement. ATE stock a comprehensive range of ratchet strap assemblies to suit virtually any application, along with car recovery straps and loadbinders.
Fitted with ergonomic handles which are shaped to improve comfort, these work by pulling the handle down, rather than pushing it up. The pulling motion and longer handles on the ratchet means that less force is required to tighten the strap. This saves a lot of effort and makes the process much easier. Using the ergonomic ratchet straps reduces stress on the user's back and joints, and is recognised by many haulage companies as a beneficial contribution to operator welfare. Call the Sales Team for more details on stock lines.
Towmate Ratchet Straps Hardware 1. Towmate® ratchet straps are manufactured with double sprockets on the ratchet to ensure smooth operation and ease of use
5T Ratchet Strap Assemblies
Car Recovery Strap - Soft Eye
Car Recovery Strap - Metal Eye
33.0024 Car Recovery Strap (Soft Eye)
33.0041 Car Recovery Strap (Metal Eye)
2T Ratchet Strap Assemblies
Wear Sleeve
Bridging Strap
33.0017 33.0018 33.0019 33.0020
33.0027 50mm x 200mm Wear Sleeve
33.0025 Bridging Strap (Metal Eye) 33.0042 Bridging Strap (Soft Eye)
Endless Loop Ratchet Strap
Ratchet Strap With ‘J’ Hook
33.0031 25mm x 4.5m Endless Loop Ratchet Strap
33.0028 25mm x 4.5m Ratchet Strap with ‘J’ Hook
33.0001 33.0002 33.0003 33.0004 33.0005
Webbing Capacity Length 50mm 5000kN 4m 50mm 5000kN 6m 50mm 5000kN 8m 50mm 5000kN 10m 50mm 5000kN 12m
2. Solid steel handle with plastic grip for comfortable use in cold weather. 3. All metalwork is stamped with the break strain. Webbing 1. All Towmate® straps are manufactured in our own unmistakeable and high-vis light green, thus assisting use in the dark. 2. We add a stiffening agent during the weaving process. This helps to resist moisture ingress and helps prevent fraying. 3. All Towmate® straps conform to GS and TUV standards and have the necessary blue label sewn in showing the date of manufacture, GS and TUV logos, capacity rating, size and unique serial number. 4. Webbing is fully compliant with EU legislation and EN Rating, EN12195-2
We can make ratchet straps to suit your requirements. A large range of different end fittings and lengths can be made to order.
Webbing Capacity Length 35mm 2000kN 4m 35mm 2000kN 6m 35mm 2000kN 8m 35mm 2000kN 10m
800kg Ratchet Strap Assemblies 33.0021 33.0022 33.0023
Optional End Fittings
Webbing Capacity 25mm 800kN 25mm 800kN 25mm 800kN
Length 4m 6m 8m
Rave Hook
Claw Hook
Fixed J Hook
D-Ring
Snap Hook
Twisted Snap Hook
5. Tear resistant Blue Label. Made from embossed vinyl to resist tearing and thus increase longevity of conformity and ensuring traceability. 6. Safe operating instructions are also sewn into the webbing.
198
Call by 3.30pm for next day delivery on all stock lines...
call 01206 795949 email
[email protected] www.ate-uk.com
199
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories
Loadbinders, Luggage Straps & Cargo Track
Trailer Hardware & Accessories Luggage Strap (Pack Of 2)
Luggage Strap
33.0030 25mm x 2.5m Luggage Strap with Cam Buckle (pack of 2)
33.0029 25mm x 5m Luggage Strap with Cam Buckle
Trailer Body Building Parts
Tie Down Hook 34.0014 Zinc Plated Tie Down Hook
Ratchet Loadbinder
Loadbinder Grade ‘T’ (8) Chain BSEN818-2
Rope Hook ½”
Plastic Button Cleat
Recessed Lashing Ring
PART NO. Chain Ø
PART NO.
A
34.0018 Rope Hook ½”
34.0028 Black Plastic Button Cleat
34.0015 Recessed Lashing Ring
(per metre) 33.2007 33.2008 33.2009 33.2010
(mm) (mm) (mm) (tonnes) 8 24 29.6 4.0 10 30 37.0 6.3 13 39 48.1 10.6 16 48 59.2 16.0
Weld-On Rope Hook
Weld-On Lashing Ring
Rope Hook
34.0016 Weld-on Rope Hook
34.0017 Weld-on Lashing Ring
34.0020 Rope Hook 3/8”
33.2004 8-10mm 33.2005 10-13mm 33.2006 13-16mm
Max Load (tonnes) 8.6 15.0 21.0
B
C
Lashing Capacity
PLEASE SPECIFY LENGTH REQUIRED (in metres) B
C
A
Cargo Track
Round Shoring Poles
Gravely Fastener
Nylon Door Retainer
Bolt-On Lashing Ring
33.3001 Standard Track Size 3.05m x 66mm Depth14mm Gauge1.5mm Holes 25mm
Part No 33.3003 33.3004
34.0021 Gravely Fastener
34.0022 Nylon Door Retainer
34.0059 Bolt-on Lashing Ring – Galvanised
200
33.3002
Heavy Duty Track Size 3.05m x 82mm Depth 15mm Gauge 2.5mm Holes 25mm
Length Diameter Wall 2270-2650mm 42mm 3.0mm 2050-2550mm 44mm 2.6mm
Call by 3.30pm for next day delivery on all stock lines...
call 01206 795949 email
[email protected] www.ate-uk.com
201
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories Steel Pull Handle 34.0033 Steel pull handle with rubber grip
32 x 150
Trailer Hardware & Accessories Locking Large T-Handle
Non Locking Large T-Handle
34.0035 Large T-handle (101mm) locking type Hole Centres 45mm
34.0036 Large T-handle (101mm) non locking type Hole Centres 45mm
45mm
F
Gas Struts A huge selection of different gas struts and end fittings are available either as a replacement or for new installations.
D
When ordering a replacement please supply the details from the original including dimensions, fittings and newton rating. Small T-Handle
Black Plastic Pull Handle
Flettner Ventilator
34.0037 Small T-handle (60mm) locking type Hole Centres 45mm
34.0034 Black plastic pull handle Hole Centres 165mm
34.0046
Flettner Ventilator
C
Were a new gas strut is required, some basic dimensions are needed as shown on the diagram, along with the particular application. To enable us to supply the correct part, please supply the details below;
B
A
A. Length between fixing points B. Distance between shoulders C. Stroke length Flettner TCX Ventilator
Multi-Directional Ventilator
Slam Lock
D. Rod diameter
34.0047
34.0068 Multi-directional Ventilator 280mm x 280mm 34.0048 Multi-directional Ventilator 400mm x 400mm 34.0069 Multi-directional Ventilator 500mm x 500mm
34.0053
E. Tube diameter
Flettner TCX Ventilator
Slam lock
E
F. End fitting type & size G. Newton rating Alternatively please download a gas strut order form from ate-uk.com F
Universal Budget Lock 34.0054
Universal Budget lock
Next day AM delivery on all stocked parts ordered by 3.30pm* Delivery Update Service If you register a mobile phone number or an email address with your account, you can request that we text or email you your delivery time for your convenience - allowing you to plan your day and be more productive!
202
Call by 3.30pm for next day delivery on all stock lines...
Why not request weekly e-shots with our unique hot deals, special offers and promotions! Simply email
[email protected] to ensure you don’t miss out!
call 01206 795949 email
[email protected] www.ate-uk.com
203
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories
Dropside & Tailgate Fittings & Fasteners
Trailer Hardware & Accessories
Overcentre Catch
Overcentre Locking
Overcentre Fastener
Rubber Bonnet Pull
Antiluce Plate
Sword Pins
Self Drilling Screws
34.1001 Overcentre catch 146-163 x 48 34.1003 Bracket
34.1002 Overcentre locking catch 146-163 x 48 34.1003 Bracket
34.1055 Overcentre fastener 260 x 60 complete with catch plate
34.1050 Rubber bonnet pull
34.1054 Antiluce plate for standard antiluce 34.1053 Antiluce plate for baby antiluce
A 34.3154 60mm 34.3155 90mm 34.3156 100mm 34.3157 114mm
B 10mm 12mm 12mm 16mm B
A
Tailboard Catch
Bolt-On Baby Antiluce
Weld-On Baby Antiluce
M12 Bolt-On Antiluce
Weld-On Forket
Round Cotter & Chain
3/8” Spring Bolt
34.1006 Tailboard catch 235 x 37 34.1007 Bracket
34.1009 M8 Bolt on baby antiluce
34.1011 8mm Weld-on baby antiluce
34.1010 M12 Bolt-on standard antiluce
34.1040 Weld-on forket
34.1041 Round cotter & chain
PART NO. 34.1046 3/8” Spring Bolt
M12 Bolt-On Antiluce
Weld-On Antiluce
Antiluce Plate
Antiluce Plate
½” Short Spring Bolt
34.1012 M12 Bolt-on standard antiluce long
34.1013 12mm Weld-on standard antiluce
34.1014 Antiluce plate for standard antiluce 5” long
34.1015 Antiluce plate for standard antiluce 9” long
PART NO. 34.1051 ½” Short Spring Bolt
Ramp Fastener Set
Ramp Fastner
Ramp Fastner
Tailboard Lug
5/8” Spring Bolt
34.1037 Ramp fastener set
34.1057 M12 Ramp Fastner Receiver For Ifor Trailer
34.1058 M12 Ramp Fastner Lever Handle For Ifor Trailer
34.1038 Tailboard lug
PART NO. 34.1045 5/8” Spring Bolt
204
34.3158-50 Self Drilling Screws Suitable for fixing floors to trailers
Call by 3.30pm for next day delivery on all stock lines...
Base Plate 70mm x 40mm
Hole Centres 46mm x 24mm
Base Plate 120mm x 40mm
Hole Centres 85mm x 21mm
½” Spring Bolt Base Plate 75mm x 40mm
Base Plate 130mm x 50mm
Hole Centres 42mm x 27mm
Hole Centres 98mm x 32mm
PART NO. 34.1044 ½” Spring Bolt
Pin & Chain
Flat Cotter & Chain
34.1043 Pin & chain
34.1047 Flat cotter & chain
call 01206 795949 email
[email protected] www.ate-uk.com
205
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories
Trailer Hardware & Accessories
Weld-On Lug
Bolt-On Lug
Lynch Pin
Propstand Safety Chain
34.1048 Weld-on Lug for flat cotter
34.1056 Bolt-on Lug for flat cotter
34.3169 Lynch pin C/W wire rope
34.3170 Snap hook & chain
Plastic Tool Boxes
Keep the cab tidy and all your tools in one place! These useful tool boxes are designed to be mounted under a truck or trailer and provide additional storage for a wide range of tools, accessories and ratchet straps. Features
Thread Length 37mm
• Single handle 3-point locking mechanism Swept Hinge
Corner Pillar
Socket
Small Hinge
34.1004 L/H Swept hinge 34.1005 R/H Swept hinge
34.1018 Corner pillar (heavy duty)
34.1019 L/H Socket for 34.1018 34.1020 R/H Socket for 34.1018
34.1021 Small hinge
• Handle Dust Cover • Fully recyclable, chemical resistant, UV-stabilised PE • May be incorporated in the side guard according to Regulation No 73 (UN/ECE)
Straight Hinge
Bolt-On Gudgeon
Weld-On Gudgeon
Weld-On Hinge
34.1022 6” Straight hinge
34.1025 Bolt-on gudgeon
34.1026 Weld-on gudgeon
34.1027 Weld-on hinge
Length
Height
Depth
34.0038
450mm
380mm
400mm
34.0039
520mm
360mm
360mm
34.0040
580mm
400mm
450mm
34.0041
620mm
360mm
610mm
34.0042
650mm
500mm
480mm
34.0043
800mm
500mm
480mm
34.0044
1000mm
500mm
480mm
34.0045
1200mm
500mm
480mm
Take total control of your towed fleet with Towman® is your tailored telematics solution for
Weld-On Hinge
Gudgeon & Hinge Set
Locking Bar Tab
Straight Hinge
34.1028 Weld-on hinge
34.1029 Bolt-on gudgeon & hinge set
34.1036 Locking bar tab
34.1023 18” Straight hinge 34.1024 20” Straight hinge
towed equipment Towman® makes management of towed-equipment simple and effective, and all from the comfort of your desk. Feeding you with live, accurate data as to the location of your equipment, its mileage and its recent running time, when a service is due, and it even tells you whether equipment is currently running.
TOW IT. TRACK IT. MANAGE IT.
To find out how you can save money and increase efficiency, please call 01206 795949 or visit www.towman.co 206
Call by 3.30pm for next day delivery on all stock lines...
call 01206 795949 email
[email protected] www.ate-uk.com
207
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories
Trailer Hardware & Accessories Phenolic Trailer Flooring
Floor Protection
Information
Rubber mats are made from solid non-porous rubber that, unlike other similar types of mat, will not split, tear, break up, spread or absorb liquids. The mats are available in various sizes including 4’ x 6’ & 1.2m x 2m, and come in two thicknesses, 10mm & 17mm. Two surface finishes are available – broad rib or hammered.
Other types of rubber are available supplied in mats or on a roll. Please ask the sales office for details.
Wycombe Trailer Mat
Grip Top Rubber
34.2007
Wycombe Trailer Mat
Wycombe Trailer Mat: Made from non-porous, high quality solid rubber, this mat has a tortoiseshell top surface with a wide rib base. Unlike other similar types of matting, these will not tear, split, break up, spread or absorb liquids. Size 1830 x 1220 x 10
6mm Broad Rib Rubber 34.2014
6mm Broad Rib Rubber 1.2m
Broad Rib Rubber: An economical 6mm ribbed rubber suitable for many applications. The non-slip honey comb surface does not absorb or become slippery when wet. Size 1200mm width. Available cut to length, sold per metre.
An essential part of the trailer which must be more than capable of holding the maximum load that is ever likely to be placed upon it. • Dark brown slip resitant face • Smooth dark brown reverse • EN13986, EN636-2
34.2012
• EN314-2 Class 3 phenolic resin bonded
Grip Top Rubber 1.2m
Grip Top Rubber: An extremely tough option, this hard wearing grip-top rubber matting provides an excellent grip for all ramps. Perfectly suited for use on horseboxes, trailer and cattle wagon ramps. Size 1200mm width. Available cut to length.
• Edges sealed red PEFC 34.2015 2500 x 1250 x 12mm Ply flooring with phenolic coating & mesh pattern 34.2001 2500 x 1250 x 18mm Ply flooring with phenolic coating & mesh pattern 34.2002 3050 x 1525 x 18mm Ply flooring with phenolic coating & mesh pattern
Self Drilling Screws 34.3158-50 Self Drilling Screws Suitable for fixing floors to trailers
Loading ramps are available to special order only. Please enquire regarding sizes and prices.
208
Moulded Rubber Ramp Mat:
Continuous Roll Rubber
34.2013
34.2008 10mm Continuous Roll Rubber 34.2009 15mm Continuous Roll Rubber 34.2010 10mm Continuous Roll Rubber 34.2011 10mm Continuous Roll Rubber
Moulded Rubber Ramp Mat
Moulded Rubber Ramp Mat: Ribbed ramp mat with integral rubber bars. The superb rib texture offers a maximum slip resistance while the integral rubber bars, spaced to conform to DEFRA regulations, are also ribbed to ensure a secure foothold. The mat is non-absorbent 100% rubber and can be hosed clean in seconds. Other sizes available. Size 2.15m x 2.48m
2.4m 2.4m 1.8m 1.2m
Continuous Roll Rubber: Another non-porous, high quality product, this 10mm thick solid rubber matting has a hammer blow type top with micro rib base. Its hardwearing anti-slip rubber makes it the ultimate choice for joint-free walkways and trailer flooring. Available from 1.2m up to 2.4m wide, sold per metre.
Call by 3.30pm for next day delivery on all stock lines...
Call us and request your own login details to gain access to your special prices, stock availability, special offers and our unique PartPal search facility!
call 01206 795949 email
[email protected] www.ate-uk.com
209
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories
Trailer Hardware & Accessories
Bolts, Nuts & Washers
Information
Very necessary, and yet unnoticed, are the fixings which hold the whole trailer’s structure together.
The following sections show all the standard sizes held in stock. If there is a size you require not shown, please contact our sales office with your requirements.
Washers - Pack of 20
Spring Washer - Pack of 20
Nuts - Pack of 20
34.3001-20 M6 34.3006-20 M8 34.3020-20 M10 34.3033-20 M12 34.3051-20 M14 34.3054-20 M16
34.3212-20 M6 34.3008-20 M8 34.3211-20 M10 34.3210-20 M12
34.3206-20 34.3002-20 34.3007-20 34.3021-20 34.3035-20 34.3160-20
M4 M6 M8 M10 M12 M16
Bolts - Pack of 20
Set Screws - Pack of 20
Nyloc Nuts - Pack of 20
Cotter Pin - Pack of 20
Roll Pin - Pack of 20
34.3014-20 34.3016-20
M8 x 60 Bolts M8 x 70 Bolts
34.3027-20 34.3028-20 34.3029-20 34.3030-20 34.3031-20 34.3163-20 34.3032-20
M10 x 60 Bolts M10 x 70 Bolts M10 x 80 Bolts M10 x 90 Bolts M10 x 100 Bolts M10 x 110 Bolts M10 x 120 Bolts
34.3165-20 34.3166-20 34.3004-20 34.3005-20
M6 x 20 Set Screws M6 x 30 Set Screws M6 x 40 Set Screws M6 x 50 Set Screws
34.3010-20 34.3011-20 34.3012-20 34.3013-20
M8 x 20 Set Screws M8 x 30 Set Screws M8 x 40 Set Screws M8 x 50 Set Screws
34.3203-20 M3 34.3204-20 M4 34.3205-20 M5 34.3003-20 M6 34.3009-20 M8 34.3022-20 M10 34.3036-20 M12 34.3050-20 M14 34.3053-20 M16
34.3193-20 34.3195-20 34.3194-20 34.3197-20 34.3196-20 34.3198-20 34.3199-20 34.3201-20 34.3202-20 34.3200-20
34.3041-20 34.3042-20 34.3043-20 34.3044-20 34.3162-20 34.3045-20 34.3164-20 34.3046-20 34.3047-20 34.3048-20 34.3159-20
M12 x 60 Bolts M12 x 70 Bolts M12 x 80 Bolts M12 x 90 Bolts M12 x 100 Bolts M12 x 110 Bolts M12 x 120 Bolts M12 x 130 Bolts M12 x 150 Bolts M12 x 170 Bolts M12 x 180 Bolts
34.3023-20 34.3024-20 34.3025-20 34.3026-20
M10 x 20 Set Screws M10 x 30 Set Screws M10 x 40 Set Screws M10 x 50 Set Screws
34.3181-20 34.3037-20 34.3038-20 34.3039-20 34.3040-20
M12 x 16 Set Screws M12 x 20 Set Screws M12 x 30 Set Screws M12 x 40 Set Screws M12 x 50 Set Screws
34.3215-20 34.3216-20 34.3214-20 34.3217-20 34.3220-20 34.3218-20 34.3219-20 34.3221-20 34.3213-20 34.3222-20 34.3223-20 34.3224-20 34.3225-20 34.3226-20 34.3227-20 34.3228-20 34.3229-20 34.3230-20
Bolts 10.9 Grade - Pack of 20
CSK Self Tapper - Pack of 20
Pan Self Tapper - Pack of 20
34.3167-20
M14 x 30 Set Screws
34.3058-20 M14 x 100mm Bolts 10.9 Grade 34.3059-20 M14 x 110mm Bolts 10.9 Grade
34.3052-20
M14 x 170 Bolts
34.3168-20
M16 x 30 Set Screws
34.3056-20 34.3057-20
M16 x 110 Bolts M16 x 150 Bolts
34.3182-20 34.3183-20 34.3184-20 34.3185-20 34.3192-20
34.3186-20 34.3187-20 34.3188-20 34.3189-20 34.3190-20 34.3191-20
Bolt, Nut & Shakeproof Washer - Pack of 20
Pop Rivet - Pack of 20
BSP Grease Nipple - Pack of 10
UNF Grease Nipple - Pack of 10
34.3207-20 34.3208-20 34.3209-20
34.3231-10 34.3232-10
34.3233-10 34.3234-10
34.3129-20 34.3130-20 34.3131-20 34.3132-20 34.3133-20
210
M16 x 45mm M16 x 55mm M16 x 65mm M16 x 75mm M16 x 90mm
Call by 3.30pm for next day delivery on all stock lines...
6x1 8x1 10 x 1 12 x 1 12 x 2
3.2mm x 12mm 4mm x 12mm 4.8mm x 12mm
1/16 x 1 3/32 x 1 1/16 x 1.5 1/8 x 1.25 3/32 x 2 5/35 x 1.25 3/16 x 1.5 5/32 x 2 3/16 x 3 1/4 x 1.5
M3 x 8 M3 x 16 M2 x 16 M4 x 10 M5 x 12 M4 x 25 M4 x 45 M5 x 26 M1 x 12 M5 x 40 M6 x 24 M6 x 40 M8 x 20 M8 x 33 M8 x 40 M10 x 25 M10 x 32 M10 x 40
6x1 8x1 10 x 1 12 x 1 10 x 3/4 12 x 1 1/2
1/8 Straight 1/8 Angled
call 01206 795949 email
[email protected] www.ate-uk.com
1/4 Straight 1/4 Angled
211
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories
Trailer Hardware & Accessories
Straight Grease Nipple - PK/10
Steel Hose Clip - Pack of 20
34.3235-10 34.3237-10 34.3239-10 34.3241-10
34.3274-20 34.3275-20 34.3276-20 34.3277-20 34.3278-20 34.3279-20 34.3280-20 34.3281-20 34.3282-20 34.3283-20
M6 x 1 M8 x 1 M8 x 1.25 M10 x 1
Wire Ropes, Lynch Pins & Shackles
9.5 - 12mm (000) 11 - 16mm (M00) 13 - 20mm (00) 16 - 22mm (0) 18 - 25mm (0X) 22 - 30mm (1A) 25 - 35mm (1) 27 - 40mm (1X) 40 - 55mm (2) 45 - 60mm (2X)
Angled Grease Nipple - PK/10
Internal Circlip - Pack of 20
External Circlip - Pack of 20
34.3236-10 34.3238-10 34.3240-10 34.3242-10
34.3254-20 11mm 34.3255-20 13mm 34.3256-20 16mm 34.3257-20 19mm 34.3258-20 21mm 34.3259-20 22mm 34.3260-20 25mm 34.3261-20 30mm 34.3262-20 35mm 34.3263-20 38mm 34.3161-20 68.2mm 34.3128-20 79.9mm
34.3264-20 11mm 34.3265-20 13mm 34.3266-20 16mm 34.3267-20 19mm 34.3268-20 21mm 34.3269-20 22mm 34.3270-20 25mm 34.3271-20 30mm 34.3272-20 35mm 34.3273-20 38mm 34.3127-20 58.5mm
M6 x 1 M8 x 1 M8 x 1.25 M10 x 1
Copper Sealing Washer - Pack of 20
34.3243-20 34.3244-20 34.3246-20 34.3245-20 34.3247-20 34.3248-20 34.3249-20 34.3250-20 34.3251-20 34.3252-20 34.3253-20
34.3284-20 34.3285-20 34.3286-20 34.3287-20 34.3288-20 34.3289-20 34.3290-20 34.3291-20 34.3292-20 34.3293-20 34.3294-20 34.3295-20 34.3296-20 34.3297-20
Bonded Seal Washer - Pk/20 34.3298-20 M10 34.3299-20 M12 34.3300-20 M14 34.3301-20 M16 34.3302-20 M18 34.3303-20 M20 34.3304-20 M22 34.3305-20 M24
34.3092 Single 34.3092-100 Reel of 100m
34.3094 Single 34.3094-100 Reel of 100m
Other sizes of wire rope are available – please call
Other sizes of wire rope are available – please call
Lynch Pin - Pack of 10
B
L
Pipe Lynch Pin
M5 x 9 x 1 M6 x 10 x 1 M6.5 x 9.5 x 1 M8 x 12 x 1 M9 x 14 x 1 M10 x 14 x 1 M10 x 16 x 1.5 M12 x 16 x 1.5 M13 x 18 x 1.5 M14 x 18 x 1 M14 x 20 x 1.5 M15 x 20 x 2 M16 x 22 x 1.5 M17 x 23 x 1.5
Pin Dia (Ø)
Ring Dia (B)
Pin Length (L)
4.5mm
32.5
40
34.3085-10
6mm
32.5
45
34.3087-10
8mm
35
45
34.3089-10
10mm
65
70
34.3090-10
11mm
34.5
40
34.3091-10
Pipe Lynch Pin - Pack of 10
L
Ø
Pipe Dia (Ø)
Pin Dia (D)
Pin Length (L)
35mm
8
40
34.3171-10
40mm
6
45
34.3172-10
45mm
8
50
34.3173-10
55mm
8
60
34.3174-10
55mm
10
60
34.3175-10
D
D Shackles
‘R’ Clips - Pack of 10 2 mm ‘R’ Clip
5mm Wire Rope
ø
‘O’ Ring - Pack of 20 14 x 2.65mm 22 x 1.8mm 24 x 1.8mm 22 x 2.65mm 26 x 2.65mm 27 x 2.65mm 29 x 2.65mm 29 x 3.5mm 30 x 3.5mm 32 x 2.65mm 33 x 1.8mm
Lynch Pin
3mm Wire Rope
L
W
D
42mm
14mm
14mm
D Shackles - Pack of 10
W
34.3060-10
Pin Dia (Ø)
Body Size
Opening
Max Load
5mm
5mm
10mm
80kg
34.3105-10
6mm
6mm
13mm
100kg
34.3106-10
8mm
8mm
16mm
120kg
34.3107-10
3 mm ‘R’ Clip
54mm
18mm
18mm
34.3061-10
4 mm ‘R’ Clip
74mm
22mm
26mm
34.3062-10
5 mm ‘R’ Clip
106mm
36mm
30mm
34.3063-10
10mm
10mm
18mm
150kg
34.3108-10
6 mm ‘R’ Clip
118mm
42mm
32mm
34.3064-10
11mm
11mm
21mm
250kg
34.3109-10
7 mm ‘R’ Clip
172mm
54mm
32mm
34.3065-10
13mm
13mm
26mm
400kg
34.3110-10
16mm
16mm
31mm
900kg
34.3111-10
20mm
20mm
39mm
1000kg
34.3112-10
22mm
22mm
42mm
1270kg
34.3113-10
25mm
25mm
51mm
2000kg
34.3114-10
BS
L D
Ø O
Supplied untested. Breaking load = 5 x Recommended maximum load.
212
Call by 3.30pm for next day delivery on all stock lines...
call 01206 795949 email
[email protected] www.ate-uk.com
213
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories Snap Hook
Trailer Hardware & Accessories Snap Hook
Ø
L
Dia (Ø)
Length (L)
Max Load
Pack of 10
4mm
40mm
13kg
34.3115-10
5mm
50mm
45kg
34.3116-10
6mm
60mm
58kg
34.3117-10
7mm
70mm
100kg
34.3118-10
8mm
80mm
125kg
34.3119-10
9mm
90mm
150kg
34.3120-10
10mm
100mm
175kg
34.3121-10
11mm
120mm
183kg
34.3122-10
12mm
140mm
190kg
34.3123-10
13mm
160mm
200kg
34.3124-10
‘U’ Bolts
‘U’ Bolt Plate
‘U’ Bolt Plate
34.3144 Width 40mm to suit M10 ‘U’ Bolts
34.3145 Width 50mm to suit M10 ‘U’ Bolts
‘U’ Bolt Plate
‘U’ Bolt Plate
34.3146 Width 60mm to suit M10 ‘U’ Bolts
34.3147 Width 70mm to suit M10 ‘U’ Bolts
'U' bolts are used to secure solid beam axles to leaf spring suspension. You'll find all our axles and suspension units from page 114 onwards.
Information
TS
We can supply tested Bow Shackles & 'D' Shackles complete with certificates.
W TL
L
ATE offer a selection of European Type Approved rolling chassis kits suitable for a wide range of towable plant, including compressors, pumps, generators and bowsers. Key Features • European Type Approved chassis •Chassis complies with all current requirements of Directive 2007-46EC
‘U’ Bolt Plate
Part No
Width (W)
Length (L)
Thread Size
Thread Length
34.3134 34.3135 34.3136 34.3137 34.3138 34.3139 34.3140 34.3141 34.3142 34.3143 34.3149 34.3150 34.3151 34.3152
40 40 40 50 50 50 60 70 80 80 38 45 50 60
70 90 110 80 106 132 90 106 76 116 137 150 170 180
M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12
30 30 30 30 30 30 30 30 30 30 80 85 85 100
34.3148 Width 80mm to suit M10 ‘U’ Bolts
Width
DID YOU KNOW...?
‘U’ Bolts
U' Bolt C/W Nyloc Nuts M12
•Quality rubber torsion axles built with positive camber and toe-in
34.3149 34.3150 34.3151 34.3152
• Manufactured with fully welded A-frame drawbars
U' Bolt C/W Nyloc Nuts M12 (38 x 137) U' Bolt C/W Nyloc Nuts M12 (45 x 150) U' Bolt C/W Nyloc Nuts M12 (50 x 170) U' Bolt C/W Nyloc Nuts M12 (60 x 180)
Next day AM delivery on all stocked parts ordered by 3.30pm*
• Adjustable positioning for axles and load bearers •Issued with VIN identity and unique certificate of conformity for use within the EU
Call us on 01206 795949 to discuss your requirements! 214
Call by 3.30pm for next day delivery on all stock lines...
Delivery Update Service If you register a mobile phone number or an email address with your account, you can request that we text or email you your delivery time for your convenience allowing you to plan your day and be more productive!
call 01206 795949 email
[email protected] www.ate-uk.com
215
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories
Trailer Covers Manufactured from heavy duty PVC material similar to the material used on commercial curtain sided artic trailers, these covers are designed to stand up to regular use. They are fitted covers, with corners sown in, and reinforced eyes around the edge. We hold several sizes in stock, but mostly they are made to order.
Trailer Hardware & Accessories Trailer Covers 34.4001 34.4003 34.4004 34.4005 34.4006 34.4007
4’ x 3’ x 4" 6’ x 4’ x 4" 1100 x 920 x 100 1280 x 1000 x 100 1560 x 1000 x 100 2000 x 1200 x 100
Please call if you require a special size.
Pumps
34.5010 1” BSP Inlet/Outlet Double Action Diaphragm Pump. Flow rate 70 ltr/min
HP2 Handpump
34.5004
34.5001 HP2 Handpump & 3.4 litre reservoir assembly
34.5007 34.5008
TOWMATE FLAT-BED TRAILERS
34.5009 1” BSP Inlet/Outlet Single Action Diaphragm Pump. Flow rate 45 ltr/min
Semi Rotary Pump
34.5006
01206 795949
Double Action Diaphragm Pump
Pumps, accessories and equipment for the movement and handling of water and fuel.
34.5005
CALL FOR INFORMATION
Single Action Diaphragm Pump
K0 ½” BSP Inlet/Outlet Semi Rotary Pump Flow rate 12 ltr/min K1 ¾ ” BSP Inlet/Outlet Semi Rotary Pump Flow rate 22 ltr/min K2 1” BSP Inlet/Outlet Semi Rotary Pump Flow rate 28 ltr/min K3 1 ¼” BSP Inlet/Outlet Semi Rotary Pump Flow rate 40 ltr/mi K4 1 ½”BSP Inlet/Outlet Semi Rotary Pump Flow rate 50 ltr/min
The HP2 Handpump is available with other size reservoirs if requested.
Manual Shut Off Nozzle
Manual Shut Off Nozzle
SX500 Handpump
34.5013 Manual Shut Off Nozzle C/W 3m x 25mm bore hose
34.5015 Manual Shut Off Nozzle Only
34.5002 SX500 Handpump with integral Hydraulic Cylinder (500mm stroke) 34.5003 SX700 Handpump with integral Hydraulic Cylinder (700mm stroke)
Nothing beats the versatility of a flat bed trailer with its wide range of uses! Towmate offer a choice rugged and dependable workhorses, along with a wide choice of options and accessories.
The SX series of pumps can be made with various stroke lengths on request.
Specific Features • Sturdy construction with fully welded chassis • Superior rubber torsion axles with positive camber and toe-in • Hot-dip galvanised chassis for the ultimate anti-corrosion protection • Heavy duty drawbar with locking ball head fitted as standard • 18mm phenolic coated plywood floor with optional aluminium tread plate • Drop sides and removable headboard • Spare wheel and tyre • 10 models to choose from, in 5'6" & 6'6" widths including tri-axle versions
Let us help you find the right trailer - call 01206 795949 216
Call by 3.30pm for next day delivery on all stock lines...
Prolube Bowl Filter Kit
Auto Nozzle for Diesel
34.5025 Prolube Bowl Filter Kit Water & Particle 34.5026 Spare Element for Prolube Filter Kit
34.5032 Auto Nozzle for Diesel
With modern sensitive diesel engines filtration is a must for all diesel dispensing. The latest fuels contain a percentage of biodiesel which have a higher water content. This filter kit removes water & particles to 10 micron from diesel.
Automatic nozzle for diesel for use on pump systems up to 60 litres per minute. Automatically shuts off flow of fuel when the vehicle tank is full.
Spare seal kits are available for the Patay diaphragm pumps. Other Pump & Hose fittings are available. Please call the sales office with your requirements.
call 01206 795949 email
[email protected] www.ate-uk.com
217
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories
Trailer Hardware & Accessories
12V Submersible Pump Kit
Battery Transfer Pump Kit
On Demand Diaphragm Pumps
34.5019 12V submersible pump kit
34.5020 12/24V Battery Transfer Pump Kit
Ideal for low volume or emergency pumping applications. Suitable for diesel, biodiesel B30 & water to 80°C. - Length 147mm, diameter 52.5mm.
Convenient multi-voltage pump for diesel which is able to pump at high speed when connected to a 24V battery.
34.5021 34.5022 34.5023 34.5024
• 2m, ½”outlet hose. • 500 hour life expectancy. • 3m battery cable & croc clips. • Max working pressure 15 psi (1 bar). • Continuously rated for periods of up to 1 hour.
• 12V pumps at 35 litres per minute • 24V pumps at 70 litres per minute • Suitable for diesel or biodiesel up to B30. • Max run time 30 minutes (12V) and 15 minutes (24V). • Foot mounting plate and carry handle. On/off switch & bypass valve. • 4m battery cable & croc clips. • 6m delivery/suction hose. • Suction foot valve & strainer must be fitted to validate warranty. • Weatherproof to IP54 for outdoor use.
12V 4L/min 12V 17L/min 230V 17L/min 110V 17L/min
On demand diaphragm pumps suitable for portable water systems. Maximum run time 30 mins.
Bowser Parts
Aluminium Filler Cap
Plastic Filler Cap
34.6001 Aluminium Filler Cap
34.6002 Plastic Filler Cap
Adblue Lever Hand Pump Kit
Black Inner Lid & Vent
New Style Lid
34.5030 Lever Hand Pump Kit Adblue® C/W Trisure/Valorex adaptor
34.6003 Black Inner Lid & Vent
34.6010 New Style Lid
For Beacons see page 182-183
Lever hand pump kit with adaptor, fits most Adblue containers. Adblue is used on all new trucks and machinery, and even diesel road cars from September 2015. You can’t use normal refuelling equipment with Adblue.
110V On-Demand Pump Kit 34.5016
Roller Breaker Parts
Water bowser pump kit - suitable for on-demand pumping requirements on bowsers, shower and welfare units etc. 110v only.
Information
40mm Swivelling Eye
Drawbar Clamp
13.5001K 40mm Swivelling Eye (weld-on housing) 13.5007 Spare Eye Shaft for 13.5001
34.7001 Drawbar Clamp
Hose and Pipe Fittings are not included in Pump Kit listed. See 34.5024 for pump only
Adblue Rotary IBC Pump Kit
Liquid Extraction Vacuum Pump
Locking Pin
Weld-On Locking Pin
Tool Box
34.5031 Rotary IBC Pump Kit - Adblue®
34.5027 2.7 litre 34.5028 6 litre 34.5029 17 litre
34.7002 L/H Locking Pin C/W handle & spring 40mm Ø 34.7003 R/H Locking Pin C/W handle & spring 40mm Ø
34.7004 L/H Weld-on Locking Pin Bracket 34.7005 R/H Weld-on Locking Pin Bracket
34.7006 Tool Box
Easy to use compete rotary hand pump kit for dispensing Adblue from a 1,000 litre IBC (Intermediate bulk container)
Sucks up & stores diesel, oils and water. Choose from 2.7, 6 or 17 litres capacity. Used to remove the oil from machinery without the need to use the drain plug. Use the probes provided to extract straight from the dipstick.
Bulk container not included
218
Call by 3.30pm for next day delivery on all stock lines...
call 01206 795949 email
[email protected] www.ate-uk.com
219
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories
Trailer Hardware & Accessories
Boat Trailer Parts Boat Trailers require special fittings consisting of various rubber rollers and blocks in order to support the boat’s hull correctly. They also aid the launch and recovery process.
Ribbed Roller - Non-Marking
Flat Keel Roller
36.0019 Ribbed Roller Non-Marking 36.0020 Ribbed Roller Non-Marking 36.0021 Ribbed Roller Non-Marking
36.0011 Flat Keel Roller 36.0012 Flat Keel Roller
120 x 74 x 15
Keel V Roller 127 x 70 x 16 127 x 70 x 19
36.0013 Keel V Roller
Bracket 203 x 76 x 19
120 x 74 x 21
36.1004 Bracket to suit 36.0011 & 36.0009 (16mm Ø shaft) 36.1005 Bracket to suit 36.0012 & 36.0010 (19mm Ø shaft)
120 x 74 x 26.5
Keel V Roller - Non-Marking
Bracket
Bracket
Parallel Side Roller
36.0022 Keel V Roller Non-marking 36.0023 Keel V Roller Non-marking 36.0024 Keel V Roller Non-narking
36.1027 Bracket for 36.0019
36.1028 Bracket for 36.0020
36.0014 Parallel Side Roller
Bracket
Bracket
Bracket
Bracket
Bracket
Double Side Roller
36.1029 Bracket for 36.0021
36.1030 Bracket for 36.0022
36.1031 Bracket for 36.0023
36.1008 Bracket to suit 36.0013
36.1010 Bracket to suit 36.0014
36.0016 Double Side Roller
Bracket
Flat Keel Roller
Keel V Roller
Castor Side Roller
Ribbed Roller
Bracket
36.1032 Bracket for 36.0024
36.0008 Flat Keel Roller
220
Single Side Roller 203 x 57 x 16
36.0015 Single Side Roller
Bracket 56 x 102 x 16
36.1003 Bracket to suit 36.0008
206 x 98 x 16 206 x 98 x 21 130 x 80 x 16
91 x 53 x 10
36.0009 Keel V Roller 36.0010 Keel V Roller
127 x 57 x 16 127 x 70 x 19
Call by 3.30pm for next day delivery on all stock lines...
36.0017 Castor Side Roller
48 x 93 x 19
36.0018 Ribbed Roller
90 x 127 x 32
120 x 102 x 16
36.1012 Bracket to suit 36.0015
call 01206 795949 email
[email protected] www.ate-uk.com
221
THE ATE HANDBOOK / ISSUE TWO
THE ATE HANDBOOK / ISSUE TWO
Trailer Hardware & Accessories
Trailer Hardware & Accessories
Bracket
Double Side Castor Bracket
Combination V Keel Bracket
36.1014 Bracket to suit 36.0016
36.1016 Double Side Castor Bracket
36.1018 Combination ‘V’ Keel Bracket
Bracket
Straight Bracket
Single Side Castor Bracket
Keel Block - Non Marking
Keel Block
36.1020 Bracket to suit 36.0018
36.1021 Straight Bracket to suit 36.0018
36.1024 Single Side Castor Bracket 36.1025 Spare Spindle For 36.1024
36.2009 Keel BlockNon Marking
36.2002 Keel Block
Stem Post
Stem
Channel Bracket
Buffer Block
36.1001 Stem Post 34mm Ø x 300mm long 36.1002 Stem Post 34mm Ø x 440mm Long
36.1026 Stem for 36.1020 & 36.1021
36.1023 Channel Bracket to suit 36.2003
36.2005 Buffer Block
Snubber Block
Side Buffer Block
Winch Posts
Call us and request your own login details to gain access to your special prices, stock availability, special offers and our unique PartPal search facility! 222
Call by 3.30pm for next day delivery on all stock lines...
Keel Block
Rubber Blocks
36.2007 Snubber Block
36.2004 Keel Block
152 x 42 x 38
Side Buffer 168 x 60 x 110
36.2003 Side Buffer
304 x 43 x 25
150 x 80 x 70
304 x 38 x 19
36.2008 Side Buffer Block
Buffer Block 203 x 50 x 48
460 x 44 x 25
36.2006 Buffer Block
260 x 50 x 50
Information For Hand Winches see page 196-197
call 01206 795949 email
[email protected] www.ate-uk.com
223