STATE OF MINNESOTA PRICING PAGE
Seq. #726-612
TRACTOR: LOADER-BACKHOE
Price quote for: Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address:
June, 2012
TITAN MACHINERY FRED SENGER 15125 SO. ROBERT TRAIL ROSEMOUNT, MN, 55068 651-423-2222 800-642-4441 651-423-4551
[email protected]
Spec #
Information Requested
Answer
1.0
Make & Model
NEW HOLLAND B95C
New Holland B95C
Engine HP gross/net (SAE)
97 hp. / 95 hp.
Aspiration
Turbocharged
Transmission, type and number of forward and reverse gears
Power Shuttle 4x4
Hydraulic pump (GPM and PSI)
40 gpm. / 3,045 psi
GPM for backhoe
40 gpm.
GPM for loader
40 gpm.
Brakes
Wet Disc
Steering
Hydrostatic
Drive Axles
Double Reduction
Front tires, size and type
11L x 16, 10 pr. F3
Rear tires, size and type
19.5 x 24 10 pr. R4
Backhoe digging depth (SAE) (Standard stick)
14' 5"
Backhoe digging depth 2' flat bottom (SS)
14' 4"
Backhoe reach from swing pivot at ground line (SS)
18' 6"
Backhoe loading height (SS)
12'
Backhoe loading reach (SS)
5' 1"
Backhoe digging depth (SAE) (Retracted extendable stick)
15'
Backhoe digging depth (SAE) (Extended extendable stick)
18' 5"
Backhoe digging depth 2' flat bottom (RES)
14' 11"
Backhoe digging depth 2' flat bottom (EES)
18' 4"
Backhoe reach from swing pivot at ground line (RES)
19' 1"
STATE OF MINNESOTA PRICING PAGE
Seq. #726-612
Backhoe reach from swing pivot at ground line (EES)
22' 2"
Backhoe loading height (RES)
12' 6"
Backhoe loading height (EES)
14' 6"
Backhoe loading reach (RES)
5' 4"
Backhoe loading reach (EES)
8' 10" 1.1 cu. Yd.
Loader capacity (SAE) standard bucket
88"
Loader standard bucket width
13' 10"
Loader maximum operating height Loader lift capacity at maximum height
7,943 lbs.
Loader breakout force
15,057 lbs.
Loader maximum hinge pin height
11' 4"
Loader dump reach at maximum height
2' 7"
Loader maximum bucket roll back at ground level
36 degrees
Loader digging depth, with bucket flat
5"
Lights, front/rear
2/2 Electric Instrumentation
Gauges
12 months
Warranty Term (months, years) BASE UNIT PRICE:
New Holland B95C
June, 2012
$61,302.00
STATE OF MINNESOTA PRICING PAGE
Seq. #726-612
Price quote for:
June, 2012
TRACTOR: LOADER-BACKHOE
VENDOR NAME:
TITAN MACHINERY, ROSEMOUNT ______________________________________ NEW HOLLAND B95C
MAKE AND MODEL Spec #
Description BASE UNIT PRICE:
1.0 2.0
Qty
Price
Subtotal
$
61,302.00
$
-
OPERATOR ENVIRONMENT Use this section to offer operator environment options. Number items starting with 2.1, 2.2, etc. Use as many numbers as you need.
2.1
Air conditioning (factory)
$
1,886.00
$
-
2.2
Upgrade seat, Air ride
$
1,012.00
$
-
2.3
Upgrade seat belt, 3"
$
67.00
$
-
2.4
Fire extinguisher
$
120.00
$
-
2.5
ROP - FOBS - less cab
$
(4,146.00) $
-
2.6
Radio AM/FM
$
530.00
$
-
2.7
Speedometer
$
221.00
$
-
2.8
Tilt Steering Wheel
$
382.00
$
-
$
-
3.0
ELECTRICAL Use this section to offer electrical options. Number items starting with 3.1, 3.2, etc. Use as many numbers as you need.
3.1
Beacon
$
275.00
$
-
3.2
Strobe
$
400.00
$
-
4.0
POWERTRAIN Use this section to offer powertrain options. Number items starting with 4.1, 4.2, etc. Use as many numbers as you need. Power Shift Transmission
$
3,502.00
$ $
-
4.1 4.2 5.0
5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.10 6.0
6.1 6.2 6.3 NEW HOLLAND B95C
AXLES & TIRE OPTIONS Use this section to offer axle and tire options. Number items starting with 5.1, 5.2, etc. Use as many numbers as you need. 2-Wheel Drive Front Tires 11Lx16,10 Ply Front,19.5Lx24 ,10 Ply,R4 Rear Front Wheel Assist Front Tires 12-16.5 Galaxy 14-17.5 Galaxy 12-16.5 Hulk Galaxy 12.5-8018 Beefy Baby, (requires 19.5L-24 rear tire) Rear Tires 19.5L-24 EZ Rider Galaxy 21L-24 EZ Rider Galaxy 16.9-28 EZ Rider Galaxy 19.5L-24 Jumbo Hulk Galaxy (4 WD Only) Front Wheel Assist w/ 12x16.5 F, 19.5x24 R Tires HYDRAULICS Use this section to offer hydraulic options. Number items starting with 6.1, 6.2, etc. Use as many numbers as you need. Loader auxiliary valve, factory Backhoe valve 2 way, add hammer valve from factory too One way hammer valve, factory with pipes to end of boom and flow control
$
IN BASE IN BASE $ 442.00 $ 1,117.00 $ 1,537.00 IN BASE $ 303.00 $ 540.00 $ 3,243.00 $ 8,475.00
$ $ $
1,188.00 4,500.00 1,852.00
#VALUE! $ #VALUE! $ $ $
#VALUE! $ $ $
-
$ $ $ $
-
Seq. #726-612
STATE OF MINNESOTA PRICING PAGE
6.4 6.5
Hand tool circuit, factory (includes flow control) Stabilizer control w/Auto Up (pilot control units only)
7.0
BACKHOE OPTIONS Use this section to offer backhoe options. Number items starting with 7.1, 7.2, etc. Use as many numbers as you need. Pilot Control 2 Lever, 4 Lever controls - mechanical control models only 2 Lever ISO Controls - (Exc Pattern) - Mech. Control models only Backhoe quick-coupler ( Manual New Holland ) Mechanica Quick Coupler (Woods-CF) Direct Pin Coupler (Woods-CF) Coupler Pin Kit (Woods-CF) Extendable dipper stick, w/ heavy counterweight 12" Bucket HC1 18" Bucket HC1 24" Bucket HC1 30" Bucket HC1 36" Bucket HC1 48" Ditch-cleaning bucket Swinger Coupler W/Direct Pin Coupler Interface (Add Two Way Hyd.) Hydraulics to run Swing Coupler Towtem Hydraulic Thumb w/ Hyd. Kit Add for factory installed hammer kit Towtem Hydraulic Thumb w/ Hammer & Hyd Kit BX8 (800 ft.lb class) Hydraulic breaker with standard mounting bracket and choice of one tool (approx. wt. 680lbs) BT310-M-730 Moil Tool, or BT310-B-730 Blunt Tool, or BT310-C-730 Chisel Tool BX10 (1,000 ft.lb class) Hydraulic breaker with standard mounting bracket and choice of one tool (approx. wt. 820lbs) BT410-M-806 Moil Tool, or BT410-B-806 Blunt Tool, or BT410-C-806Chisel Tool TC92 (8,200 lb. Impulse engergy) Hydraulic compactor with standard mounting bracket (approx. wt. 1,130lbs)
7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 7.10 7.11 7.12 7.13 7.14 7.15 7.16 7.17 7.18 7.19 7.20
7.21 7.22
7.23 7.24
8.0
8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.10 8.11 8.12 8.13 8.14 8.15 8.16 8.17 8.19 8.20 8.21 NEW HOLLAND B95C
FRONT LOADER OPTIONS Use this section to offer front loader options. Number items starting with 8.1, 8.2, etc. Use as many numbers as you need. New Holland 88" bucket 1.1 cu. Yd. New Holland 88" bucket 1.3 cu. Yd. New Holland 4 and 1 bucket with bolt on edge, Add Auxiliary Hydraulics New Holland flip over forks with 1.3 cu. Yd. Bucket ACS Hydraulic quick-coupler, Add Auxiliary Hyd.: Series 1000/Size 10 ACS Manual quick-coupler ACS Blank female adapter ACS Female adaptor for broom attachment ACS GP Bucket 1.25 w/BOE ACS 48" Forks 4 and 1 Bucket ACS,1.25 Cu.Yd Add Auxiliary Hydraulics Bucket lift hooks, each FFC Hydraulic Quick Coupler FFC Hose and QD kit FFC Manual Quick Coupler FFC 1.3 cu yd Bucket FFC 90" 4 x 1 Bucket, Add Auxiliary Hydraulics FFC 83" Heavy Duty Scrap Grapple Bucket FFC 48" Pallet Fork FFC-115 Series 108" Snow Blade
June, 2012
$ $
1,323.00 165.00
$ $
-
$ $ $
2,512.00 420.00 420.00
$ $ $ $ $ $ $ $ $ $ $ $ $ $
1,270.00 2,472.00 1,391.00 154.00 5,906.00 1,093.00 1,223.00 1,380.00 1,524.00 1,705.00 1,982.00 3,557.00 4,900.00 9,062.00
$ $
11,737.00 11,965.00
$ $
393.00 15,357.00
$ $
508.00 9,071.00
$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $
-
$ $ $
1,042.00 1,440.00 2,767.00
$ $
1,942.00 3,481.00
$ $ $ $ $ $
2,739.00 887.00 1,264.00 4,476.00 3,452.00 8,879.00
$ $ $ $ $ $ $ $ $
275.00 4,381.00 603.00 2,333.00 2,723.00 7,127.00 6,533.00 3,709.00 5,175.00
$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $
-
STATE OF MINNESOTA PRICING PAGE
Seq. #726-612
June, 2012
8.22 8.23 8.24 8.25 8.26 8.27
FFC-115 Series 120" Snow Blade FFC Lift Boom FFC 96" Hyd. Drive Broom with Hydraulic Angle FFC-3600 Series 120" Snow Pusher Medium Front Counterweight (825 lbs.) Heavy Front Counterweight (1118 lbs.)
$ $ $ $ $ $
5,691.00 1,594.00 15,106.00 4,629.00 513.00 787.00
$ $ $ $ $ $
-
9.0
PERFORMANCE OPTIONS Use this section to offer performance options. Number items starting with 9.1, 9.2, etc. Use as many numbers as you need. Glide Ride, Ride control for loader
$
1,335.00
$ $
-
$
105.00
$ $ $ $ $ $ $ $ $ $
-
275.00 $ 775.00 $ 2,195.00 $ 70%
-
$
-
9.1 9.2 10.0
HOURLY SHOP LABOR RATE: (Installation services may be requested on an as needed basis)
11.0
VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price
12.1 12.2 12.3 12.4 12.5 12.6 12.7 12.8 12.9
EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 10.1, 10.2, etc. (Specify years, miles or hours extended term covers.) 36 months / 3000 hr. Full coverage / 0 Deductible 36 months / 3000 hr. Power Train / 0 Deductible 36 months / 3000 hr. PT + Hydraulic / 0 Deductible 48 months / 4000 hr. Full coverage / 0 Deductible 48 months / 4000 hr. Power Train / 0 Deductible 48 months / 4000 hr. PT+ Hydraulic / 0 Deductible 60 months / 5000 hr. Full Coverage / 0 Deductible 60 months / 5000 hr. Power Train / 0 Deductible 60 months / 5000 hr. PT + Hydraulic / 0 Deductible
13.0
NEW EQUIPMENT RENTAL PROGRAM
12.0
$
$ $ $ $ $ $ $ $ $
1,976.00 337.00 906.00 2,786.00 553.00 1,268.00 3,649.00 751.00 1,665.00
Price:
If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Day Rental Rate: $ Weekly Rental Rate: $ Monthly Rental Rate: $ Percent (%) of Rental Fee applied to purchase price: If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: ________________ 14.0
VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price.
15.0
DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES - (See Special Terms and Conditions) Price List Date and Number
16.0
DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS DELIVERY STARTING POINT - City, State, Zip
%
NO FLAT RATE ALLOWED Rosemount, MN 55068 PRICE PER LOADED MILE: $
NEW HOLLAND B95C
4.00