TITGEMEYER Gruppe67GB(0214)1

■ Lighting

All rights reserved. The technical data quoted in this catalogue, performance descriptions, recommendations and instructions e.g. for the installation of the components available from us, are without liability. These are based on our experience. Claims against us as a consequence are expressly excluded as much of the application of our goods remains outside our direct influence. It is a fundamental obligation of the user to ascertain and to decide wether the goods provided by us are appropriate for a particular application.

This catalogue is our intellectual property! Disclosure to third parties is prohibited. Reproduction – even in part – as well as use of our illustrations and TITGEMEYER part-numbering systems is only permitted with our express permission in writing. Subject to change. Supply of goods is in conformity with our delivery and payment conditions. Gebr. TITGEMEYER GmbH & Co. KG Osnabrück

L Over 100 years of tradition and expertise At the turn of the century, an ironware wholesale business was established by the two Titgemeyer brothers, Adolf and Fritz, in their hometown of Melle. A few years later, offices were opened in the neighbouring town of Osnabrück. Since then, the business enterprise group TITGEMEYER has continuously developed and is totday a leader in the fields of fastening technology and commercial vehicle equipment. The medium sized family organization is now led by the third generation - always with the aim of supplying the optimum solution for the customer - from single fixings, right up to complex vehicle systems.

Fastening Technology The more varied the requirements, the more individual our solution is. The result: an extensive product range of fastening technology systems and solutions. New products are constantly being developed, as the manufacturing industry demands specially designed solutions. TITGEMEYER introduced the POP® blind rivet to the German market. Its application revolutionised traditional fastening technology. The TITGEMEYER fastening technology product range • Blind Rivets • Threaded Inserts • Assembly Systems • Installation Tools

Vehicle components with style The ideas and wishes of our customers are our benchmark. That is why we carefully develop approved products and systems for the manufacture of modern commercial vehicles. Safety, cost effectiveness and the environment - these requirements are all satisfied by our product range. The original and innovative body kit system, GETO® VAN, is only one of many system solutions available from TITGEMEYER today. The TITGEMEYER commercial vehicle product range • Body Kits • Chassis Technology • Bodywork Components • Bodywork Systems • Sealants and Adhesives

Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

3

4

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

Contents

Lighting

Installation material

Lights

Reflectors

Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Bulbs, festoon lamps ...........................................................67.01.01.1 Vehicle wiring ......................................................................67.01.02.1 Cable clips, chassis .............................................................67.01.03.1 Electrical connector sockets.................................................67.01.04.1 Crimp connectors, cable connectors....................................67.01.05.1 Plugs and sockets ................................................................67.01.06.1 Switches...............................................................................67.01.07.1 Rear markings ......................................................................67.01.08.1 Tail lights .............................................................................67.02.01.1 Lamp holders .......................................................................67.02.02.1 Registration plate lights .......................................................67.02.03.1 Position and marker lights ...................................................67.02.04.1 Roof lights............................................................................67.02.05.1 Rear fog lights......................................................................67.02.06.1 Reversing lights ...................................................................67.02.07.1 Side marker lights................................................................67.02.08.1 Reflectors .............................................................................67.03.01.1

Fax: +49 (0)5 41/58 22-494

email: [email protected]

5

Contents

670 017 000.....................67.01.01.1 670 018 000.....................67.01.01.1 670 037 000.....................67.01.01.1 670 038 000.....................67.01.01.1 670 041 000.....................67.01.01.1 670 042 000.....................67.01.01.1 670 049 000.....................67.01.01.1 670 055 000.....................67.01.01.1 670 107 000.....................67.01.01.1 670 108 000.....................67.01.01.1 670 111 000.....................67.01.01.1 670 130 000.....................67.01.01.1 670 131 000.....................67.01.01.1 670 209 000.....................67.01.02.1 670 227 000.....................67.01.02.1 670 229 000.....................67.01.02.1 670 235 000.....................67.01.02.1 670 249 000.....................67.01.02.2 670 301 000.....................67.01.03.1 670 303 000.....................67.01.03.1 670 339 000.....................67.01.04.1 670 347 000.....................67.01.04.1 670 349 000.....................67.01.04.1 670 381 000.....................67.01.05.1 670 497 000.....................67.01.05.2 670 498 000.....................67.01.05.2 670 499 000.....................67.01.05.2 670 515 000.....................67.01.06.1 670 517 000.....................67.01.06.1 670 535 000.....................67.01.06.1 670 549 000.....................67.01.06.1 670 557 000.....................67.01.07.1 670 559 000.....................67.01.07.1 670 597 000.....................67.01.05.2 670 610 000.....................67.01.06.2 670 617 000.....................67.01.06.2 670 619 000.....................67.01.06.2 670 624 000.....................67.01.06.3 670 625 000.....................67.01.06.3 670 627 000.....................67.01.06.3 670 628 000.....................67.01.06.3 670 710 000.....................67.01.06.4 670 715 000.....................67.01.06.4 670 717 000.....................67.01.06.5 670 720 000.....................67.01.06.4 670 725 000.....................67.01.06.4 670 727 000.....................67.01.06.5 670 730 000.....................67.01.06.6 670 735 000.....................67.01.06.6 670 737 000.....................67.01.06.6 670 740 000.....................67.01.06.7 670 745 000.....................67.01.06.7 670 747 000.....................67.01.06.7 670 748 000.....................67.01.06.7 670 810 000.....................67.01.08.1

6

L

670 815 000.....................67.01.08.1 670 820 000.....................67.01.08.1 670 825 000.....................67.01.08.1 670 830 000.....................67.01.08.3 670 830 001.....................67.01.08.3 670 831 000.....................67.01.08.3 670 831 001.....................67.01.08.3 670 840 000.....................67.01.08.3 670 860 000.....................67.01.08.4 670 861 000.....................67.01.08.4 670 862 000.....................67.01.08.4 670 863 000.....................67.01.08.4 670 864 000.....................67.01.08.4 670 865 000.....................67.01.08.4 670 870 000.....................67.01.08.4 670 871 000.....................67.01.08.4 670 872 000.....................67.01.08.4 670 873 000.....................67.01.08.4 670 874 000.....................67.01.08.4 670 875 000.....................67.01.08.4 670 880 000.....................67.01.08.5 670 881 000.....................67.01.08.5 670 882 000.....................67.01.08.2 671 080 000.....................67.02.01.3 671 100 000.....................67.02.01.1 671 121 000.....................67.02.01.8 671 331 000.....................67.02.01.2 671 345 000.....................67.02.01.1 671 348 000.....................67.02.01.4 671 349 000.....................67.02.01.4 671 379 000.....................67.02.01.4 671 380 000.....................67.02.01.4 671 440 000.....................67.02.01.6 671 441 000.....................67.02.01.6 671 442 000.....................67.02.01.6 671 464 000.....................67.02.01.7 671 465 000.....................67.02.01.7 671 466 000.....................67.02.01.7 671 470 000.....................67.02.01.9 671 471 000.....................67.02.01.9 671 490 000.....................67.02.01.5 671 491 000.....................67.02.01.5 671 492 000.....................67.02.01.5 671 505 000.....................67.02.02.1 671 506 000.....................67.02.02.2 671 507 000.....................67.02.02.2 671 515 000.....................67.02.02.1 671 516 000.....................67.02.02.2 671 517 000.....................67.02.02.2 671 605 000.....................67.02.03.1 671 630 000.....................67.02.03.1 671 635 000.....................67.02.03.1 671 660 000.....................67.02.03.2 671 680 000.....................67.02.03.2 671 746 000.....................67.01.01.1 671 748 000.....................67.01.01.1

Phone: +49 (0)5 41/58 22-0

671 785 000.....................67.02.04.1 671 796 000.....................67.02.04.2

679 220 000.....................67.03.01.3

671 808 000.....................67.02.04.2 671 835 000.....................67.02.04.4 671 848 000.....................67.02.04.3 671 852 000.....................67.02.04.3 671 854 000 ....................67.02.04.3 671 860 000.....................67.02.04.4 671 868 001.....................67.02.04.4 671 868 002.....................67.02.04.4 671 870 000.....................67.02.04.5 671 878 001.....................67.02.04.4 671 878 002.....................67.02.04.4 671 880 000.....................67.02.01.3 671 880 000.....................67.02.04.5 671 885 000.....................67.02.01.3 671 885 000.....................67.02.04.5 671 905 000.....................67.02.08.3 671 915 000.....................67.02.08.1 671 917 000.....................67.02.08.2 671 918 000.....................67.02.08.2 671 925 000.....................67.02.08.3 671 927 000.....................67.02.08.3 672 020 000.....................67.02.05.1 672 021 000.....................67.02.05.1 672 030 000.....................67.02.05.2 672 040 000.....................67.02.05.1 672 050 000.....................67.02.05.3 672 077 000.....................67.02.05.3 672 078 000.....................67.02.05.4 672 080 000.....................67.02.05.4 672 082 000.....................67.02.05.5 672 083 000.....................67.02.05.5 672 084 000.....................67.02.05.5 672 085 000.....................67.02.05.5 672 090 000.....................67.02.05.6 672 165 000.....................67.02.05.7 672 167 000.....................67.02.05.7 672 221 000.....................67.02.05.7 672 350 000.....................67.02.07.1 672 351 000.....................67.02.07.1 672 540 000.....................67.02.06.1 672 740 000.....................67.02.07.1 672 760 000.....................67.02.07.2 672 762 000.....................67.02.07.3 679 001 000.....................67.03.01.2 679 007 000.....................67.03.01.2 679 014 000.....................67.03.01.1 679 016 000.....................67.03.01.1 679 104 000.....................67.03.01.2 679 112 000.....................67.03.01.1 679 203 000.....................67.03.01.3

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.01.01.1 Lighting Installation material Bulbs, festoon lamps

L Bulbs for headlights and lamps to DIN 72 601, type test compliant Wattage Part No. Voltage DIN-Form Base old Watt Volt new Single filament bulbs for interior lights 670 017 000 12 HL 4 BA 9s T8/4 670 018 000 24 Single filament bulbs for taillights, registration plate lights and interior lights 670 037 000 12 G 5 BA 15s R 19/5 670 038 000 24 670 041 000 12 G 10 BA 15s R19/10 670 042 000 24 Single filament bulbs for indicators, brake and rear fog lights R 18 12 BA 15s 670 049 000 R RL 21 12 BA 15s 670 055 000 P 25/1 Single filament festoon lamps for taillights, registration plate lights, interior lights, etc. 670 107 000 12 L 5 S 8,5 C 11 670 108 000 24 Single filament festoon lamps for lights K 10 12 S 8,5 670 111 000 K Glass based bulbs for side marker lights 670 130 000 12 3 W 3 W W 10/3 W 2,1x9,5d 670 131 000 24 671 746 000 12 – 5 – W5W 671 748 000 24 1

Non-standardised

Pack unit content - 10 off

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.01.01.2 Lighting Installation material Bulbs, festoon lamps

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.01.02.1 Lighting Installation material Vehicle wiring

L Vehicle wiring type FLLK Construction: Bright fine wire copper conductor with plastic insulation. Single cores to DIN 72 551, form B. Additional plastic outer sheath, nominal cross-section 1.5 mm2. Copper no. 29.0; Wire strands 21. Strand diameter 0.3 mm Cross-section, flat 3.9 x 6.6 mm No. of cores [item]

Colour

Weight approx. [kg/m]

Part No.

2

black

0.054

670 209 000

Plastic cable type NYMHY Medium duty plastic sleeved cable to VDE standard Nominal voltage: 500 volts (permitted operating voltage in d.c. circuits - 440 volts in respect to earthed conductor). Construction: Copper conductor bright, fine wire, plastic insulation, cores stranded, in 5 and 7 colours. Plastic outer sheath black. Nominal cross-section 1.5 mm2 No. of cores [item]

Outer-ø [mm]

5 7

9.6 10.8

Copper No. Weight approx. [kg/m] 72 101

0.210 0.220

Part No. 670 227 000 670 229 000

Rubber insulated cable type NMH Medium duty rubber insulated cable to VDE standard Nominal voltage: 500 volts (permitted operating voltage in d.c. circuits - 440 volts in respect to earthed conductor). Construction: Copper zinc plated, fine wire, rubber insulation, cores stranded, in 2, 3, 4, 5 and 7 colours. Plastic outer sheath black. Nominal cross-section 1.5 mm2 No. of cores [item]

Outer-ø [mm]

4

9.7

Copper No. Weight approx. [kg/m] 58

0.195

Part No. 670 235 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.01.02.2 Lighting Installation material Vehicle wiring Spiral cable completely assembled with two 7 pin plugs made of non-ferrous metal. Due to the helical and spring-like form of spiral cable, long cable lengths can be accommodated in small spaces. Spiral cable is provided with thick-walled neoprene sheathing or with special nylon sheathing. Both types are resistant to oil, grease, corrosion, light and heat. The individual cable types are made of high quality copper fine strands, the insulation of which has the conventional colour designations.

L = usable length

Spiral cable sets

1

Cores [item]

Windings [item]

A [mm]

B [mm]

C [mm]

D [mm]

d [mm]

L [mm]

Weight approx. [kg/m]

Part No.

7 (6x1/1x1,5)

30

260

110

500

50

8

4500

0.825

670 249 0001

Spiral cable with plug to DIN 72 579 SAE (Europa-Plug)

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.01.03.1 Lighting Installation material Cable clips, chassis

L Chassis clips for chassis thicknesses up to approx. 5 mm Material: Spring steel, burnished For outer cable ø [mm]

External dimensions

Weight approx. [kg/100 items]

Part No.

6 8

25 x 12 x 10 43 x 12 x 13

0.320 0.550

670 301 000 670 303 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.01.03.2 Lighting Installation material Cable clips, chassis

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.01.04.1 Lighting Installation material Electrical connector sockets

L Electrical connector socket with screw connections by means of flexible terminal clamping strips,water and dust tight, terminal clamping strips interchangeable. For cables up to 10 mm2 nominal cross-section. Rubber casing, twin cable entry both ends. Cover with gasket and fastened by means of a knurled screw. External dimensions of socket casing 120 x 73 x 35 mm. 4 screw holes in bottom of casing of ø 4.5 mm, pitched 38 mm in the length and 30 mm in the width. Material: Casing: bakelite, black. Gasket and cable entry: rubber, black. Flexible terminal clamping strips: PVC, black No. of terminals [item] 8

Arrangemant of Weight approx. [kg/m] clamping strip 2 x 4 Pole

Part No. 670 349 000

0.195

Electrical connector socket with screw connections by means of flexible flat plug strips, interchangeable water and dust tight. Rubber casing, twin cable entry both ends. Cover with gasket and fastened by means of a knurled screw. 4 screw holes in bottom of casing of ø 4.5 mm, pitched 38 mm in the length and 30 mm in the width. Material: Casing: bakelite, black. Gasket and cable entry: rubber, black. Flexible terminal clamping strips: PVC, black No. of terminals [item]

Dimension [mm]

8

120x73x35

Arrangemant of Weight approx. clamping strip [kg/m] 2x4 items

0.2

Part No. 670 339 000

Electrical connector socket, 6-terminals: with pressed-in screw connections, not interchangeable, water and dust tight. Rubber casing, twin cable entry both ends. Cover with gasket and wire yoke fasteners. External dimensions of casing 115 x 67 x 33 mm. 2 screw holes in bottom of casing of ø 5 mm , pitched 30 mm in the width. Material: Casing: bakelite, black. Cover fitted with gasket and cable entry: rubber, black. Cover made of bright aluminium. Yoke type fastener made from spring wire. Weight: approx. 0.130 kg/item Part No. 670 347 000 The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.01.04.2 Lighting Installation material Electrical connector sockets

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.01.05.1 Lighting Installation material Crimp connectors, cable connectors

L Crimp connectors Colour Suitable For wire for code of crosssections insulation bolts [mm2] Flat plug sleeve, insulated – blue 1.5 - 2.5

Packet As figure Content Weight approx. no. [item] [kg] 1

50

Part No.

0.090 670 381 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.01.05.2 Lighting Installation material Crimp connectors, cable connectors Cable ties and loom ties Its use keeps things tidy and reduces the risk of electrical shortcircuiting caused by worn-through cables. The polyethylene material, of which the ties are made, provides a high degree of flexibility, good securement, is strong and therefore enables rapid securement to be effected. Very good dielectric properties, resists ageing, rotting and corrosion, no damage to the cables. Material: Polyethylene, not dyed, opac white Part No. 670 497 000 – 145 mm length / 3.6 mm width 670 498 000 – 295 mm length / 4.8 mm width 670 499 000 – 355 mm length / 4.8 mm width

PVC insulation tape Plastic rolls of tapes with removable side flanges. Single sided strong bonding adhesive tape, fire resistant, resists ageing, penetration of moisture, is generally resistant to chemicals such as diluted acids, alkalies, oils, greases and many solvents. Tape width: 15 mm Tape thickness: 0.15 mm Temperature resistant: -40 to +80 °C Material: Soft PVC, black Part No. 670 597 000 – Roll length 10 metres

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.01.06.1 Lighting Installation material Plugs and sockets

L Plug, 7 pin, metal with screw connection To B7 DIN 72 577, overall length 96 mm, max. ø 56 mm, plug socket ø 36 mm, load capacity 7 x 22 amps., up to 24 volts Material: Casing non-ferrous metal, solid, bright metal finish Weight: approx. 0.125 kg/ item Part No. 670 515 000 Plug, 7 pin, plastic with screw connection To B7 DIN 72 577, overall length 98 mm, max. ø 54 mm, plug socket ø 36 mm, load capacity 7 x 22 amps., up to 24 volts. Flexible, impact and shock proof, unaffected by petrol, oil etc. Material: Casing plastic, black Weight: approx. 0.86 kg/item Part No. 670 517 000

Sockets, 7 contacts , metal To A7 DIN 72 577, max. ø 70 mm, height 49 mm Material: Casing non-ferrous, solid, bright metal finish Type of connections Loading capacity Weight approx. [kg/m] up to 24 volts screw

7x22 Amp.

0.140

Part No. 670 535 000

Socket base suitable for all 5 and 7 contact sockets to DIN 72 576 (superseded) and DIN 72 577 (not suitable for version 670 545 000). This base increases the cavity for connection of the socket and provides a water-tight seal. Outer ø 77 mm, internal ø 70 mm, height 385 mm, cable entry ferrule (projects into mounting face), ø 18 x 12 mm depth. Material: Rubber, black Weight: approx. 0.120 kg/item Part No. 670 549 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.01.06.2 Lighting Installation material Plugs and sockets Plug, 13 pin, 12 v, plastic with screw connection, bayonet type fastening To DIN ISO 11446, overall length 96 mm, max. ø 56 mm Material: Casing, plastic, black Weight: approx. 0.150 kg/item Accessory: parking socket Part No. 670 619 000 Part No. 670 610 000

with disconnect contact for NES socket, 13 contacts, 12 V, plastic with screw connection To DIN ISO 11446, overall-ø 77 mm, height 60 mm Material: Casing, plastic, black Weight: approx. 0.140 kg/item Part No. 670 617 000

Parking socket for receiving 13 pin socket with disconnected vehicle. Overall-ø 72 mm, height 52 mm Material: Plastic Weight: approx. 0.075 kg/item Part No. 670 619 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.01.06.3 Lighting Installation material Plugs and sockets Short adapter, 13/7 contacts, 12 V, plastic 13 pin plug and 7 contact socket to DIN ISO 11446. Overall length 104 mm, max. ø 56 mm Material: Casing, plastic, black Weight: approx. 0.210 kg/item Part No. 670 625 000

Short mini-adapter, 13/7-pin, 12V, plastic 13-pin plug and 7-pin socket ISO 11446 to ISO 1724. Total length 52.8 mm, total-ø 68 mm Material: Casing, plastic, black Weight: approx. 0.08 kg/item Part No. 670 624 000

Short adapter, 7/13 contacts, 12 V, plastic 7 pin plug and 13 contact socket to DIN ISO 11446. Overall length 150 mm, max. ø 77 mm Material: Casing, plastic, black Weight: approx. 0.240 kg/item Part No. 670 627 000

Short mini-adapter, 7/13-pin, 12V, plastic 7-pin plug and 13-pin socket ISO 1724 to ISO 11446. Total length 76 mm, total-ø 58 mm Material: Casing, plastic, black Weight: approx. 0.08 kg/item Part No. 670 628 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.01.06.4 Lighting Installation material Plugs and sockets Plug, 7-pin, metal, 24 V, conforming to ISO 1185, contact 31 with contact sleeve Solid metal construction with screw-in terminals, load capacity 7 x 20 A at 24 V, total length 115 mm. Material: Bright metal housing Weight: approx. 0.150 kg/item Part No. 670 710 000 31/1 58R/ 6

58L/ 2 7

R5

L/3 54/4

Plug socket, 7-pin, metal, 24 V, conforming to ISO 1185, contact 31 with contact pin Solid metal construction with screw-in terminals, rubber gasket in sealing cap, including cable-protection bush, load capacity 7 x 20 A at 24 V, total length 52 mm. Material: Bright metal housing Weight: approx. 0.170 kg/item Part No. 670 715 000

1

6 7

5 4

Plug, 7-pin, metal, 24 V, conforming to ISO 3731, contact 1 with contact pin Solid metal construction with screw-in terminals, load capacity 7 x 20 A at 24 V, total length 115 mm. Material: Bright metal housing Weight: approx. 0.150 kg/item Part No. 670 720 000

2 3

Plug, 7-pin, metal, 24 V, conforming to ISO 3731, contact 1 with contact sleeve Solid metal construction with screw-in terminals, rubber gasket in sealing cap, including cable-protection bush, load capacity 7 x 20 A at 24 V, total length 52 mm. Material: Bright metal housing Weight: approx. 0.170 kg/item Part No. 670 725 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.01.06.5 Lighting Installation material Plugs and sockets Spiral cable, 7-core, plastic, 24 V, conforming to ISO 1185, with 2 metal plugs, contact 31 with contact sleeve Configuration 7 x 1.5 mm2, length when stretched 4000 mm, diameter of spiral approx. 40 mm. Material: PVC lead, bright metal plugs Weight: approx. 0.990 kg/item Part No. 670 717 000

Spiral cable, 7-core, plastic, 24 V, conforming to ISO 3731, with 2 metal plugs, contact 1 with contact pin Configuration 7 x 1.5 mm2, length when stretched 4000 mm, diameter of spiral approx. 40 mm. Material: PVC lead, bright metal plugs Weight: approx. 0.990 kg/item Part No. 670 727 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.01.06.6 Lighting Installation material Plugs and sockets ABS plug, 5-pin, ADR/GGVS, 24 V, conforming to ISO 7638 plastic, with crimp connectors for standard cable 2 x 4 and 3 x 1.5 mm2, securely fixed by means of a metal clip, load capacity 20 A at 24 V, total length 115 mm. Material: Plastic housing, metal clip Weight: approx. 0.210 kg/item Part No. 670 730 000

1

2 3

7 6

4 5

ABS socket, 5-pin, ADR/GGVS, 24 V, conforming to ISO 7638, plastic, with crimp connectors for standard cable 2 x 4 and 3 x 1.5 mm2, rubber gasket in sealing cap, load capacity 20 A at 24 V, total length 115 mm. Material: Plastic housing Weight: approx. 0.180 kg/item Part No. 670 735 000

ABS spiral cable, 5-core, plastic, 24 V, conforming to ISO 7638, PVC cable with 2 x ABS plastic plugs, configuration 3 x 1.5 and 2 x 4 mm2, length when stretched 4000 mm, securely fixed by means of a metal clip. Material: PVC cable, plastic plug, metal clip Weight: approx. 1.380 kg/item Part No. 670 737 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.01.06.7 Lighting Installation material Plugs and sockets Plug, 15-pin, ADR/GGVS, 24 V, conforming to ISO 12098, plastic, with crimp connectors for standard cable and PUR cable (ADR/GGVS) 3 x 2.5; 10 x 1.5 and 2 x 1.0 mm2, securely fixed by means of a metal clip. Load capacity 20 A at 24 V, total length 115 mm. Material: Plastic housing, metal clip Weight: approx. 0.230 kg/item Part No. 670 740 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Fax: +49 (0)5 41/58 22-494

email: [email protected]

14 6

13 4

Spiral cable, 15-core to 2 x 7-core, 24 V, ISO 12098 to ISO 1185/3731 1 x 15-pin plug and 2 x 7-pin plugs, for connection of tractor vehicle with 15-pin socket to trailer with two 7-pin plug sockets, length when stretched 4000 mm, securely fixed by means of a metal clip, diameter of spiral 90 mm. Material: PVC cable, plastic/metal plugs, metal clip Weight: approx. 1.810 kg/item Part No. 670 748 000

Phone: +49 (0)5 41/58 22-0

7 12

3

Spiral cable, 15-core, ADR/GGVS, 24 V, conforming to ISO 12098, PUR cable with 2 x plastic plugs configuration 12 x 1.5 and 3 x 2.5 mm2, length when stretched 4000 mm, securely fixed by means of a metal clip, diameter of spiral 60 mm. Material: PUR cable, plastic plug, metal clip Weight: approx. 2.300 kg/item Part No. 670 747 000

L

9 15

2

Plug socket, 15-pin, ADR/GGVS, 24 V, conforming to ISO 12098, plastic, with crimp connectors for standard cable and PUR cable (ADR/GGVS) 3 x 2.5; 10 x 1.5 and 2 x 1.0 mm2, rubber gasket in sealing cap, load capacity 20 A at 24 V, total length 115 mm. Material: Plastic housing Weight: approx. 0.200 kg/item Part No. 670 745 000

Gruppe67GB(0214)1

10 11

8

1

5

67.01.06.8 Lighting Installation material Plugs and sockets

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.01.07.1 Lighting Installation material Switches

L Rocker switch and flange Rocker switch sunk into bezel, flush type. External dimensions 72 x 40 mm, 2 screw holes ø 5 mm, pitch 62 mm. Bezel only projects outwards a mere 2 mm. Material: Rocker switch plastic, black bezel, Flange aluminium, white painted finish Weight: Complete approx. 0.040 kg/item Part No. 670 557 000 – Rocker switch 670 559 000 – Flange

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.01.07.2 Lighting Installation material Switches

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.01.08.1 Lighting Installation material Rear markings

L Reflecting and yellow/red fluorescent rear marking for identification of trucks / tractor units with a load capacity of more than 3.5 t, in accordance with ECE European standard - 70. Format: 1130 x 140 x 1.2 mm (full marking) Material: Aluminium panel Part No. 670 810 000

Reflecting and yellow/red fluorescent rear marking for identification of trucks / tractor units with a load capacity of more than 3.5 t, in accordance with ECE European standard - 70. 1 set right / left for attachment to double rear doors. Format: 565 x 140 x 1.2 mm (semi marking) Material: Aluminium panel Single part: Right – Part No. 670 818 000 Left – Part No. 670 817 000 Part No. 670 815 000

left bearing

right bearing

Reflecting and yellow/red fluorescent rear marking for identification of trailers / semi-trailers with a load capacity of more than 3.5 t, in accordance with ECE European standard - 70. Format: 1130 x 200 x 1.2 mm (full marking) Material: Aluminium panel Part No. 670 820 000

Reflecting and yellow/red fluorescent rear marking for identification of trailers / semi-trailers with a load capacity of more than 3.5 t, in accordance with ECE European standard - 70. 1 set right / left bearing for attachment to double rear doors. Format: 565 x 200 x 1.2 mm (semi marking) Material: Aluminium panel Part No. 670 825 000 Attachment of rear markings see catalogue page 67.01.08.2

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.01.08.2 Lighting Installation material Rear markings Attachment layout for rear markings for trucks / tractor units and trailers / semi trailers A = max. B = min. C = max. D = max.

400 mm 350 mm 1700 mm 2200 mm

ADR warning sign, rigid, horizontally folding to indicate the transport of hazardous goods (e.g. petrol, diesel, heating oil, etc.) Format: 400 x 300 mm Material: Sheet steel Part No. 670 882 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.01.08.3 Lighting Installation material Rear markings Motor vehicle warning markings on roll for vehicles with special rights in accordance with § StVZO (German Road Traffic Regulations) (may stop at every road side), highly reflective PVC honeycomb film, self adhesive in accordance with DIN 67520 Section 2, white/red in accordance with DIN 6171. Width: 141 mm Material: PVC film Part No. 670 830 000 right, roll length 9 metres Part No. 670 830 001 right, roll length 45.7 metres Part No. 670 831 000 left, roll length 9 metres Part No. 670 831 001 left, roll length 45.7 metres

left bearing

right bearing

Container warning markings in accordance with DIN 67520 Section 2, flexible, self adhesive honeycomb film, white/red in accordance with DIN 6171. 1 set consisting of 8 each, 4 off right and 4 off left, self adhesive film. Material: PVC film Dimension: 141 x 705 mm Single par: Right – Part No. 670 842 000 Left – Part No. 670 843 000 Part No. 670 840 000

right bearing

left bearing

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.01.08.4 Lighting Installation material Rear markings

Retro-reflective warning marking Conforming to ECE R 104, for the warning illumination of commercial vehicles. High-quality design with secure, all-round seal. Without exposed sharp edges. Easy handling and straightforward fitting. Roll length 50 m. Self-adhesive, microprismatic, reflective foil for fixed bodies / rigid surfaces / width 55 mm: Part No. 670 860 000 White for front/side Part No. 670 862 000 Yellow for rear/side Part No. 670 864 000 Red for rear Eight-year warranty, subject to observance of fitting and cleaning instructions Self-adhesive, segmented, microprismatic, reflective foil for curtainsider bodies / width 51 mm: Part No. 670 861 000 White for front/side Part No. 670 863 000 Yellow for rear/side Part No. 670 865 000 Red for rear Three-year warranty, subject to observance of fitting and cleaning instructions

Retro-reflective warning marking Conforming to ECE R 104, for the warning illumination of commercial vehicles. Easy handling and straightforward fitting. Width 50 mm, roll length 50 m. Self-adhesive, single-layer, prismatic foil for fixed bodies / rigid surfaces: Part No. 670 870 000 White for front/side Part No. 670 872 000 Yellow for rear/side Part No. 670 874 000 Red for rear Ten-year warranty, subject to observance of fitting and cleaning instructions

Contour markings designed to increase the visibility of trucks and trailers Obligatory equipment for all new registrations issued in accordance with European law, effective as of 10.07.2011 (for trucks with a total weight of > 7.5 t and trailers weighing > 3.5 t).

Self-adhesive, single-layer, prismatic foil for curtainsider bodies: Part No. 670 871 000 White for front/side Part No. 670 873 000 Yellow for rear/side Part No. 670 875 000 Red for rear Three-year warranty, subject to observance of fitting and cleaning instructions

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.01.08.5 Lighting Installation material Rear markings Parking warning board in accordance with § 17 StVO (German Road Traffic Regulations), homologated in accordance with § 22a StVZO, attachment note in accordance with § 51c (6) StVZO for parked vehicles greater than 2.8 t and all trailers in built-up areas. Reflectors and licence number may not be covered up! Foldable park warning board with 8 prism reflectors, complete with fastening holes and revolving lock Format: 285 x 285 mm Weight: approx. 0.850 kg Part No. 670 880 000 – left, front Part No. 670 881 000 – right, rear

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.01.08.6 Lighting Installation material Rear markings

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.01.1 Lighting Lights Tail lights

L Tail light for rear mounting. Light lens and baseplate sealed by a plastic gasket. Cable connection via flat plug connectors. Type test conformity ref.: E1 11 584 Dimensions: 62 x 62 mm, height 40 mm Fixing: 2 fixing holes for M5 screw, hole pitch 30 mm Material: Impact and corrosion resistant plastic Weight: approx. 0.040 kg/item Bulb: not included in supply Recommended bulb: 1 festoon lamp 5W/12V – Part No. 670 107 000 1 festoon lamp 5W/24V – Part No. 670 108 000 Part No. 671 100 000

Tail light, brake light, indicator light (SBBL) Compact twin-chamber light (three functions). Cable connection via flat pin plug Type test conformity ref.: E1 43 370 Dimensions: 122 x 122 mm, depth 56 mm Fixing: 2 fixing holes for M6 screw, hole pitch 45 mm Colour of casing: grey Material: Casing and lens - plastic Weight: approx. 0.210 kg/item Bulb: not included in supply Recommended bulb: Brake light / indicator light Bulb 21W/12V – Part No. 670 055 000 Bulb 21W/24V – Part No. 670 057 000 Tail light Bulb 21W/12V – Part No. 670 041 000 Bulb 21W/24V – Part No. 670 042 000 Part No. 671 345 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.01.2 Lighting Lights Tail lights Tail, brake and indicator light cluster (SBBL) Compact twin chamber light (for three functions). Cable connection via flat pin plug. Type test conformity ref.: E1 63 208 R 4, 2a E1 63 208 R 6, R E1 7 R 01 63 208 Dimensions: 110 x 110 mm, depth 50 mm Fixing: 2 fixing holes for screws, hole pitch 45 mm Casing colour: black Material: Casing and lens made of plastic Weight: approx. 0.185 kg/item Bulb: not included in supply Recommended bulb: Brake light / indicator light Bulb 21W/12V – Part No. 670 055 000 Bulb 21W/24V – Part No. 670 057 000 Tail light Bulb 21W/12V – Part No. 670 041 000 Bulb 21W/24V – Part No. 670 042 000 Replacement part: Lamp lens – Part No. 671 333 000 Part No. 671 331 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.01.3 Lighting Lights Tail lights

37.5

Tail light, red for rear mounting. Cable connection via flat pin plug connections. Type test conformity ref.: E1 0131472 Dimensions: Base area 30 x 80 mm, depth 35 mm Material: Casing and lens made of plastic Weight: approx. 0.035 kg/item Bulbs: not included in supply Recommended bulb: Bulb 4 W/12V – Part No. 670 017 000 Bulb 4 W/24V – Part No. 670 018 000 Part No. 671 080 000

2.5

Surface mounted casing for light Part No. 671 080 000 Material: PUR casing (reaction injection moulded), black Weight: approx. 0.035 kg/item Part No. 671 880 000

50

30

80

41

91

Cable entry

6 6

10

ø10 50

30

80

35

85 114

40

5

100

6 6

Cable entry Fixing hole

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

4.5

25 5.5

Recess mounted casing for light Part No. 671 080 000 Material: PUR casing (reaction injection moulded), black Weight: approx. 0.035 kg/item Part No. 671 885 000

40

3

Fixing hole

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.01.4 Lighting Lights Tail lights Tail, brake and indicator light Brake light and indicator, light with reflectors. Type test conformity ref.: E1 153 329 Dimensions: 158 x 64 mm, height 56 mm Material: Baseplate aluminium, casing plastic Weight: approx. 0.160 kg/item Part No. 671 348 000/349 000

Tail, brake and indicator light (SBBL) Type test conformity ref.: E1 43 369 Dimensions: 85 x 95 mm, height 53 mm Fixing: 2 fixing holes ø 5.5 mm, hole pitch 45 mm with screw connections Material: Baseplate aluminium, bright lens plastic yellow and red or red/white Weight: approx. 0.130 kg/item Bulb: not included in supply Recommended bulb: Brake light / indicator light Bulb 21W/12V – Part No. 670 055 000 Bulb 21W/24V – Part No. 670 057 000 Tail light / registration plate illumination Bulb 10W/12V – Part No. 670 041 000 Bulb 10W/24V – Part No. 670 042 000 Replacement part: Light lens without registration plate illumination – Part No. 671 382 000 with registration plate illumination – Part No. 671 384 000 Part No. 671 379 000 – left 671 380 000 – right

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.01.5 Lighting Lights Tail lights Tail, brake, indicator and reversing light (SBBRL) Five-chamber rectangular light. Cable connection via flat pin plug. Lens sealed by gasket against the casing. Suitable for tanker vehicles! Type test conformity ref.: E1 53 291 Dimensions: 343 x 133 mm, height 73 mm Fixing: 2 M8 bolts with shake-proof washer and nut, bolt pitch 152 mm Material: Casing and lens made of plastic Casing colour: black Weight: approx. 0.880 kg/item Bulb: not included in supply Recommended bulb: Brake light / indicator light / reversing light Bulb 21W/12V – Part No. 670 055 000 Bulb 21W/24V – Part No. 670 057 000 Tail light Bulb 10 W/12V – Part No. 670 041 000 Bulb 10 W/24V – Part No. 670 042 000 Replacement part: Light lens – Part No. 671 492 000 Part No. 671 490 000 – r.h. version

Tail, brake, indicator, reversing and fog light cluster SBBRNL as above, but with integrated rear fog lamp. For left-hand-side use only. Spare part: Lamp lens – Part no. 671 493 000 Part No. 671 492 000 – l.h. version

Tail, brake, indicator, reversing, registration plate and rear fog light (SBBRNKL) As above, but with registration plate illumination and integrated rear fog light. For left-hand-side use only. Replacement part: Lamp lens – Part No. 671 493 000 Part No. 671 491 000 – l.h. version

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.01.6 Lighting Lights Tail lights JOKON 12-volt multi-purpose light for car trailers • Horizontal light • With built-in triangular rear lamp • Supplied complete with bulbs • Watertight 5-pole bayonet connector fitted to cable and lamp for easy installation • With connecting cable for the towing vehicle. Connects to a 13-pole connector • Cable with two auxiliary connectors for side marker, position and other lamps • Two M6 mounting bolts, spaced 152 mm apart • Type test conformity ref. E2 06061

15

ø3

6,5

6,5

130

200 152

0

21

76

76

24

M6

71 14,5

17,5

55

671 441 000 – left

671 442 000 – right 671 440 000 – right

JOKON Multi-purpose light Type

SBBLNESDR1 SBBLRLDR2 SBBLDR3

Installs in direction of vehicle left right right

L [mm]

Dimensions B [mm]

H [mm]

200 200 200

130 130 130

55 55 55

Material

Surface

Weight approx. [kg/each]

Part No.

Plastic Plastic Plastic

smooth smooth smooth

0.5 0.5 0.5

671 441 000 671 442 000 671 440 000

Rear, brake, indicator, registration plate and rear fog lamp Rear, brake, indicator, registration plate and reversing lamp 3 Rear, brake, indicator, registration plate lamp 1 2

Connecting cable set Part No. 671 470 000 – 7000 mm Part No. 671 471 000 – 10000 mm The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.01.7 Lighting Lights Tail lights Tail, brake, indicator and rear fog lights-lamp cluster SBBLNES Dimensions: 247 x 138 x 60 mm (LxWxH) Fixing: With quick-mounting plate and fixing screws for horizontal or vertical mounting Type test conformity ref.: E4 10162 Weight: approx. 0,630 kg/each Accessory: Light cover – Part No. 671 483 000 Part No. 671 465 000 – left

Tail, brake, indicator and rear fog lamps SBBL Dimensions: 247 x 138 x 60 mm (LxWxH) Fixing: With quick-mounting plate and fixing screws for horizontal or vertical mounting Type test conformity ref.: E4 10162 Weight: approx. 0,630 kg/each Accessory: Light cover – Part No. 671 482 000 Part No. 671 464 000 – right

20

186

84

52

236

Tail, brake, indicator and rear fog lights-lamp cluster SBBLRL Dimensions: 247 x 138 x 60 mm (LxWxH) Fixing: With quick-mounting plate and fixing screws for horizontal or vertical mounting Type test conformity ref.: E4 10162 Weight: approx. 0,630 kg/each Accessory: Light cover – Part No. 671 482 000 Part No. 671 466 000 – right

60

154,5

All lamps are supplied with their corresponding 12-volt bulb For horizontal configuration (Part No. 671 460 000-462 000) Tail/brake light: Spherical bulb, 21/5 W – Part No. 670 056 00 Yellow indicator lamp: Spherical bulb, 21W – Part No. 670 054 000 Rear fog lamp: Spherical bulb, 21W – Part No. 670 055 000 Number-plate lamp: Festoon bulb – Part No. 670 107 000 Reversing light: Spherical bulb, 21 W – Part No. 670 055 000 For vertical configuration (Part No. 671464 000-466 000) Tail light: Festoon bulb – Part No. 670 107 000 Brake light: Spherical bulb, 21 W – Part No. 670 055 000 Yellow indicator lamp: Spherical bulb, 21 W – Part No. 670 054 000 Rear fog lamp: Spherical bulb, 21 W – Part No. 670 055 000 Reversing light: Spherical bulb, 21 W – Part No. 670 055 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.01.8 Lighting Lights Tail lights 3rd LED safety brake light As of 1.11.2013, a 3rd brake light is required for trucks with a gross vehicle weight of up to 3.5t (EC vehicle category N1). • 3rd brake light with 10 LEDs • Can be fitted horizontally or vertically Power consumption: approx. 0.06 A at 12 V, 0.7 watts Fixing: 2 holes for 3 mm fixing screws Hole spacing: approx. 244 mm Installation height: max. 150 mm below the rear window or min. 850 mm off the ground Material: red plastic lens red plastic caps

H

B

L

L [mm]

Dimensions B [mm]

H [mm]

280

26

10

Cable length

Part No.

[mm]

Weight approx. [kg/each]

7000

0.17

671 121 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.01.9 Lighting Lights Tail lights Connecting cable set Plug: Completely mounted with a 13-pin synthetic material plug ISO 11446 Connector: 2 off 5-pin central plug with waterproof bayonet connection and double shroud Note: From the bayonet connection, each cable has a 500 mm, approx. 2-core auxiliary connection for connecting additional position or side marker lamps. Side designation: green = right amber = left Weight: 671 470 000 – approx. 1.3 kg 671 471 000 – approx. 1.6 kg Part No. 671 470 000 – 7000 mm Part No. 671 471 000 – 10000 mm

Core colours Designation Rear light Brake light Indicator light Chassis Rear fog lamp Reversing lamp Number plate light

left: black red yellow white blue black

right: brown red green white blue brown

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.01.10 Lighting Lights Tail lights

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.02.1 Lighting Lights Lamp holders

L Tail lights fitting for car trailers, central axle trailers, driveable work equipment and machinery. Housing designed for side fitting, completely equipped with 3-chamber tail lights (SBBL) with filament ball bulbs 12 volt = Part No. 671 348 000/949 000 (flashing light outside and brake light inside = 21 watt – Part No. 670 055 000, central tail light = 10 watt – Part No. 670 041 000). Triangular reflector on outside (not flush) – Part No. 692 203 000. Completely cabled with distributor cable 1200 mm long. Material: Light holder PUR-RIM (polyurethane), black Weight: approx. 0.650 kg/each Part No. 671 505 000 – right in drive direction 671 515 000 – left in drive direction

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.02.2 Lighting Lights Lamp holders Light fitting – Tail light mounted horizontally with rear fog light for trailer, centre axial trailers, towable mobile equipment and machines with 12 or 24 volt operating supply. Casing in the form of side/rear corner mounted lights, complete with either 3 or 4 chamber tail light (SBBL - right hand, SBBL-NES left hand) completely wired, without bulbs. Red triangular reflector, yellow side reflectors. Height: 70 mm Material: PUR plastic (reaction injection moulded), black Weight: approx. 1.2 kg/item Bulb: not included in supply Accessory: Plastic wheel chock – Part No. 184 850 000 (corresponding retaining fittings are integrated on the rear face of the lamp holder). Please order separately. Replacement part: Basic lamp holder – Part No. 671 250 000 / 251 000 Tail light – Part No No. 671 280 000 / 281 000 Triangular reflector – Part No. 679 203 000 Side reflector – Part No. 679 007 000 Part No. 671 506 000 – right hand side of vehicle in direction of travel Part No. 671 507 000 – left hand side of vehicle in direction of travel

Light fitting – Tail light mounted vertically with rear fog light for trailer, centre axial trailers, towable mobile equipment and machines with 12 or 24 volt operating supply. Casing in the form of side/rear corner mounted lights, complete with either 3 or 4 chamber tail light (SBBL - right hand, SBBL-NES left hand) completely wired, without bulbs. Red triangular reflector, yellow side reflectors. Height: 70 mm Material: PUR plastic (reaction injection moulded), black Weight: approx. 1.2 kg/item Bulb: not included in supply Accessory: Plastic wheel chock – Part No. 184 850 000 (corresponding retaining fittings are integrated on the rear face of the lamp holder). Please order separately. Replacement part: Basic lamp holder – Part No. 671 250 000 / 251 000 Tail light – Part No. 671 280 000 / 281 000 Triangular reflector – Part No. 679 203 000 Side reflector– Part No. 679 005 000 Part No. 671 516 000 – right hand side of vehicle in direction of travel Part No. 671 517 000 – left hand side of vehicle in direction of travel

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.03.1 Lighting Lights Registration plate lights

L Registration plate light (KL) Integral light without block for mounting to flat surfaces above the registration plate. Cap over light is fitted onto the rubber cap. Cable connection via flat pin plug. Type test conformity ref.: E1 22 808 Dimensions: 83 x 31 mm, height 33 mm Fixing: 2 fixing screws (self tapping) W 3.9 x 38, pitch of screws 68 mm Material: Lens and cover made of plastic, with rubber base Casing colour: black Weight: approx. 0.55 kg/item Bulb: not included in supply Recommended bulb: Festoon lamp 5 W/12 V – Part No. 670 107 000 Festoon lamp 5 W/24 V – Part No. 670 108 000 Part No. 671 605 000

Registration plate light (KL) Light with integrated block for mounting on flat surfaces, right hand and left hand registration plate lights. Cover sealed by rubber gasket against casing. Cable connection via flat pin plug Type test conformity ref.: E1 22 813 Dimensions: 105 x 55 mm, height 65 mm Fixing: 2 M4 fixing screws with spring washers and nuts, pitch of screws 72 mm Material: Cover with lens and casing made of plastic, reflector made of metal Casing colour: black Weight: approx. 0.08 kg/item Bulb: not included in supply Recommended bulb: Festoon lamp 5 W/12V – Part No. 670 107 000 Festoon lamp 5 W/24V – Part No. 670 108 000 Replacement part: Cover – Part No. 671 637 000 Part No. 671 635 000 Registration plate light (KL) as above but reflector lamp other hand Type test conformity ref.: E1 12 820 Replacement part: Lens cover – Part No. 671 631 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.03.2 Lighting Lights Registration plate lights

Registration plate light (KL) Long design for installation over single or double-lined registration plates. Cap fitted to rubber pad. Cable connection via flat pin plug. Cover is fitted by two fixing screws to lamp holder. Type test conformity ref.: E1 12 947 Dimensions: 300 x 55 mm, height 55 mm Fixing: 4 holes for M5 fixing screws, hole pitch 87 or 95 mm Material: Cover with lens made of plastic, lamp holder made of sheet steel, base made of rubber Casing colour: silver Weight: approx. 0.26 kg/item Bulb: not included in supply Recommended bulb: 2 festoon lamps 5W/12V – Part No. 670 107 000 2 festoon lamps 5W/24V – Part No. 670 108 000 Replacement part: Cover with lens – Part No. 671 637 000 Part No. 671 660 000

Registration plate light (KL) This light can be fitted by maintaining a lateral distance of 65 mm to the number plate (long type number plate 520 x 120 mm) without the need for a block. Cover sealed by rubber gasket against baseplate. Cable connection via flat pin plug. Type test conformity ref.: E1 12 996 Dimensions: 100 x 56 mm, height 57 mm Fixing: 2 holes for M5 fixing screws, hole pitch 45 mm Material: Baseplate aluminium, cover plastic Casing colour: Cover silver Weight: approx. 0.085 kg/item Bulb: not included in supply Recommended bulb: Bulb 10W/12V – Part No. 670 041 000 Bulb 10W/24V – Part No. 670 042 000 Replacement part: Cover – Part No. 671 681 000 Part No. 671 680 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.04.1 Lighting Lights Position and marker lights

L Position and tail lights Marker light UL without type test conformity ref. On suspended rubber strap (strap: 125 x 50 mm). Rubber strap retained at top by 2 fixing holes ø 5.5 mm, pitch 30 mm. Used for right and left hand side of the vehicle by rotating the cover to the right or left. Overall height 31 mm, cover 78 x 43 mm, integral, white beam forwards, red beam rearwards. With screw connection. Material: Suspended strap – rubber, black Lamp holder – sheet steel, zinc plated Cover – plastic Casing colour: black Weight: approx. 0.12 kg/item Bulb: as described above Replacement part: Cover – Part No. 671 786 000 Part No. 671 785 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.04.2 Lighting Lights Position and marker lights Marker light red-white for installing on the left and right hand side of the vehicle. Cable connection by means of plug connector. Type test conformity ref.: E1 11 590 R 7 Dimensions: Base 28 x 57 mm Diameter of light approx. 70 mm, height overall 74 mm, width 48 mm Fixing: Threaded bolt complete with nut and M14 shake-proof washer Material: Plastic Weight: approx. 0.09 kg/item Bulb: not included in supply Recommended bulb: Bulb 5 W/12V – Part No. 670 037 000 Bulb 5 W/24V – Part No. 670 038 000 Part No. 671 796 000

Marker light, red-white for installing on side of vehicle. Can be installed on either side of the vehicle due to its symmetrical form. Completely wired. Type test conformity ref.: E5 742/743 Dimensions: Base 40 x 97 mm Width 86 mm, height 74 mm Fixing: 2 x M 5 holes for fasteners, hole pitch 76 mm Material: Rubber, lens plastic Weight: approx. 0.119 kg/item Bulb: not included in supply Recommended bulb: Bulb 5 W/12V – Part No. 670 037 000 Bulb 5 W/24V – Part No. 670 038 000 Replacement part: Lens cover white – Part No. 671 809 000 Lens cover red – Part No. 671 810 000 Part No. 671 808 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.04.3 Lighting Lights Position and marker lights Marker light red-white Light identical to 671 852, but with rubber base for direct mounting onto vehicle body Type test conformity ref.: E1 11599 R7 Dimensions: 43 x 92, depth 37 mm Fixing: 2 self-tapping screws, hole pitch diagonally 71 mm Material: Lens cover plastic, base rubber Weight: approx. 0.035 kg/item Bulb: 1 festoon lamp 5W/12V – Part No. 670 107 000 1 festoon lamp 5W/24V – Part No. 670 108 000 Part No. 671 854 000

Marker light red-white Suspended from rubber strap. Reinforcing plate made of galvanised sheet steel. Can be used for either side of the vehicle. Cable connection by means of a flat pin plug. Type test conformity ref.: E1 11599 R7 Dimensions: 117 x 43, 37 mm deep (including mounting flange 64 mm) Fixing: 2 holes ø 7 mm, hole pitch in rubber strap approx. 15 mm Material: Lens cover plastic, strap rubber, reinforcing plate galvanised sheet steel Weight: approx. 0.086 kg/item Bulb: not included in supply Recommended bulb: 1 festoon lamp 5W/12V – Part No. 670 107 000 1 festoon lamp 5W/24V – Part No. 670 108 000 Part No. 671 852 000

Marker light red-white Suspended from rubber strap. Reinforcing plate made of galvanised sheet steel. Used for right and left hand side of the vehicle by rotating the cover to the right or left. Light shines with white beam forwards, red beam shining rearwards. Cable connection by means of a flat pin plug connections. Type test conformity ref. E1 11599 Dimensions: 114 x 43, 43 mm deep Fixing: 2 holes for M6 fixing screws, hole pitch in rubber strap 15 mm Material: Lens cover plastic, strap rubber, reinforcing plate galvanised sheet steel Weight: approx. 0.08 kg/item Bulb: not included in supply Recommended bulb: 1 festoon lamp 5 W/12V – Part No. 670 107 000 1 festoon lamp 5 W/24V – Part No. 670 108 000 Part No. 671 848 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.04.4 Lighting Lights Position and marker lights Position light (PO) With screw connections. 2 screw holes ø 4.5 in the baseplate, pitched at 45 mm. Type test conformity ref.: E1 11761 External diameter: 65 mm, depth 35 mm Material: Baseplate – sheet steel, galvanised, Rubber seal – grey, Lens cover – plastic, white Weight: approx. 0.045 kg/item Bulbs: not included in supply Recommended bulb: 1 festoon lamp 5 W/12V – Part No. 670 107 000 1 festoon lamp 5 W/24V – Part No. 670 108 000 Part No. 671 835 000

25

ø4

,5

Marker light Metal casing, black, stove enamelled, white lens, lamp holder and M 6 x 18 fixing screw riveted centrally in the base of the casing. Connection: Screw connection Replacement part: Protective casing, black Part No. 671 860 000

5000 mm 75

20

LED marker light, red with 5000 mm of cable with bare cable terminals, for right- and lefthand use with respect to direction of travel, with stuck-on backing material, Light for the GETO Van III body kit. Part-No. 671 868 001 – 24 Volt 671 868 002 – 12 Volt

25

ø4

,5

48

5000 mm 75

20

LED marker light, white with 5000 mm of cable with bare cable terminals, for right- and lefthand use with respect to direction of travel, with stuck-on backing material, Light for the GETO Van III body kit Part-No. 671 878 001 – 24 Volt 671 878 002 – 12 Volt

48

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.04.5 Lighting Lights Position and marker lights Marker light, white Cable connection via flat pin plug connections. Type test conformity ref.: E1 0121692 Dimensions: Base 30 x 80 mm, depth 35 mm Material: Casing and lens cover from plastic Weight: approx. 0.035 kg/item Bulbs: not included in supply Recommended bulb: Bulb 4 W/12V – Part No. 670 017 000 Bulb 4 W/24V – Part No. 670 018 000 Part No. 671 870 000

2.5

37.5

Mounting casing for marker light Part No. 671 870 000 Material: PUR casing (reaction injection moulded), black Weight: approx 0.035 kg/item Part No. 671 880 000

50

30

80

41

91

Cable entry

6 6

10

ø10 50

30

80

35

85 114

40

5

100

6 6

Cable entry Fixing hole

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

4.5

25 5.5

Recess fitted casing for marker light Part No. 671 870 000 Material: PUR casing (reaction injection moulded), black Weight: approx. 0.035 kg/item Part No. 671 885 000

40

3

Fixing hole

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.04.6 Lighting Lights Position and marker lights

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.05.1 Lighting Lights Roof lights

L Recessed type light fitting in roof Area of emitted light approx. 260 mm diameter. Extremely powerful light due two 18 watt bulbs, fitting type B15s/2L90°. Material: PUR (polyurethane reaction injection moulded) Weight: approx. 0.61 kg/item Replacement part: Lens – Part No. 672 022 000 Bulbs: 2 off 18W/12V – Part No. 670 049 000 Part No. 672 020 000 – black 672 021 000 – white

22

30

6

ø 265

ø 300

Metalleinlage

285

Einlass für Kabel

ø 3,3

Surface-mounted roof light Area of emitted light approx. ø 260 mm. Extremely powerful light due to two 18 watt bulbs, fitting type B15s/2L90°. Material: PUR (polyurethane reaction injection moulded) Weight: approx. 0.59 kg/item Replacement part: Lens – Part No. 672 022 000 Bulbs: 2 off 18W/12V – Part No. 670 049 000 Part No. 672 040 000 – black

52

2

39

ø 286

160

Metalleinlage

160

Einlass für Kabel

ø5

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.05.2 Lighting Lights Roof lights Surface mounted roof light with mounting panel Area of emitted light approx. 260 mm diameter. Extremely powerful light due to two 18 watt bulbs, fitting type B15s/2L90°. Material: PUR (polyurethane reaction injection moulded) Weight: approx. 1.95 kg/item Replacement part: Lens – Part No. 672 022 000 Bulbs: 2 off 18W/12V – Part No. 670 049 000 Part No. 672 030 000 – black

290

240

ø5

610

1

57

27

650

ø 286 560

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.05.3 Lighting Lights Roof lights Roof light with switch, three switch positions, light is switched on by twisting the lens cover, cable connection via flat pin plug. Dimensions: ø 147 mm, height 30 mm Fixing: 3 holes for M4 fixing screws, distributed on a pitch circle of ø 87 m. Material: Lens cover and casing made of plastic, casing surround made of aluminium, lamp holder made of galvanised sheet steel Casing colour: Bright aluminium Weight: approx. 0.165 kg/item Bulb: not included in supply Recommended bulb: 2 festoon lamps 10 watt Part No. 672 050 000

Roof light with protective grille without switch. Cable connection via flat pin plug Dimension: ø 160 mm, height 50 mm Fixing: 4 holes for M4 fixing screws, distributed on a pitch circle of ø 124 mm. Material: Baseplate made of galvanised sheet steel, light cover with protective grille and lens made of plastic. Casing colour: Chromium-plated Weight: approx. 0.205 kg/item Bulb: not included in supply Recommended bulb: Options Bulb 5 W/12V – Part No. 670 037 000 Bulb 5 W/24V – Part No. 670 038 000 Bulb 10W/12V – Part No. 670 041 000 Bulb 10W/24V – Part No. 670 042 000 Bulb 15W/12V – Part No. 670 045 000 Replacement part: Light/lens cover – Part No. 672 072 000 Part No. 672 077 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.05.4 Lighting Lights Roof lights LED recessed ceiling light Interior light with 4 x white power LEDs Multiple-voltage configuration, 10-31 V Power consumption 6 watts with 580 mm of moulded-in cable with insulated terminals ADR/GGVS, IP69-tested Temperature range: -40°C to +60°C Power consumption: 12V = approx. 0.46 A at 6W Power consumption: 24V = approx. 0.22 A at 6W Weight: approx. 0.26 kg Part No. 672 078 000

LED ceiling light Interior light with 4 x LEDs, extremely flat profile, cable terminals fitted with press-on sleeve connectors, securely sealed all round Power consumption: 28 V at 1.4 watt Dimensions: 110 x 50 mm, unit height 12 mm Fixing: 2 x holes for M5 fixing screws; hole distance 97 mm Material: Housing light-grey polycarbonate, Lamp lens clear PMMA (clear acrylic) Operating temperature: -40 °C to +40 °C IP protection rating: IPXK9K, IPXK4K Service life: 30.000 hours, depending on ambient temperature Cable length: 4.900 mm Weight: approx. 0.330 kg Part No. 672 080 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.05.5 Lighting Lights Roof lights

ø 115

ø 150

Recessed LED roof light LD 110-E • Interior light with three white power LEDs • Multiple-voltage version: Connection voltage 12 – 30 V • Power consumption 4.3 watts • Protection rating IP 68 • Luminous intensity 3 x 70 lumens • Current consumption (depending on voltage) 0.15 – 0.35 A • Service life approx. 50,000 hrs. • Screw fitting • Withstands temperatures down to -25°C Housing material: Aluminium, powder-coated in white RAL 9010 Lens material: PC (polycarbonate), single-sided structure, high impact resistance Wiring configuration: Length 1,300 mm, colour white Weight: 0.140 kg Part No. 672 082 000 – aluminium, white Housing material: Aluminium, transparent, brushed Wiring configuration: Length 1,300 mm, colour grey Part No. 672 083 000 – aluminium, transparent

ø 131,5-4x90°

15

4

Drill hole for 3.5 mm self-tapping screw with countersunk head

Surface-mounted LED roof light LD 110-A • Interior light with three white power LEDs • Multiple-voltage version: Connection voltage 12 – 30 V • Power consumption 4.3 watts • Protection rating IP 68 • Luminous intensity 3 x 70 lumens • Current consumption (depending on voltage) 0.15 – 0.35 A • Service life approx. 50,000 hrs. •Adhesive fitting • Withstands temperatures down to -25°C Housing material: Aluminium, powder-coated in white RAL 9010 Lens material: PC (polycarbonate), single-sided structure, high impact resistance Wiring configuration: Length 1,300 mm, colour white Weight: 0.140 kg Dimensions: External ø 150 mm Installation height 20 mm Part No. 672 084 000 – aluminium, white Housing material: Aluminium, transparent, brushed Wiring configuration: Length 1,300 mm, colour grey Part No. 672 085 000 – aluminium, transparent

Fitting recommendation for the surface-mounted version Adhesive attachment with 3-point MSP 155 Part No. 850 400 000 and preliminary fixing with Fixpoints Part No. 860 201 000 Pre-cleaning with MSP Cleaner 2 Part No. 850 497 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.05.6 Lighting Lights Roof lights

ø 165,1

18,6

ø 127

15

Surface-mounted LED roof light LED-S-100 12V – with motion sensor Interior light with 6 high-performance white LEDs. Even, full-surface coverage of light with built-in motion sensor with a radius of up to 5 metres. Diffusion 120° Luminosity 300 lumen Power consumption 0.6 A at 12V Screw-fitted Withstands temperatures of between -20 and + 50 °C Housing material: PC (polycarbonate), white, enhanced impact resistance Lens material: PC (polycarbonate), enhanced impact resistance Cable connector: 2-wire with bare end Cable length: approx. 200 mm Weight: 0.154 kg Dimensions: Exterior ø 165 mm Installation height ø 15 mm Part No. 672 090 000 – PC (polycarbonate), white

3 x ø 4,5

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.05.7 Lighting Lights Roof lights Transistorised roof light with in-built electronic voltage convertor. With rocker switch. Cable connection by means of flat pin plug. Dimensions: 356 x 54 mm, height 46 mm Fixing: 2 holes for M5 fixing screws, hole pitch 240 mm Material: Baseplate, sheet steel painted, Lens cover plastic Casing colour: grey Weight: approx. 0.32 kg/item Fluorescent lamp: included in supply Replacement part: Lens cover – Part No. 672 169 000 Part No. 672 165 000 – 12 volt Part No. 672 167 000 – 24 volt

Recess type roof light Area of emitted light approx. 73 x 332 mm. The casing for inserting into an opening in the roof of the vehicle has a recess depth of 35 mm, is silver in colour and therefore highly light-reflecting, which contributes to providing optimal lighting of the vehicle. Lens is hinged and can be opened by way of a rotary lock. Dimensions: Overall size 106 x 360 mm Height 43.5 mm Recess depth 35 mm Cutout 73 x 332 mm Fixing: 4 fixing holes ø 4 mm Material: Acrylic plastic Weight: approx. 0.35 kg/item Bulb: not included in supply Recommended bulbs: Options 3 festoon lamps 15W/12V – Part No. 670 115 000 3 festoon lamps 15W/24V – Part No. 670 116 000 Part No. 672 221 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.05.8 Lighting Lights Roof lights

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.06.1 Lighting Lights Rear fog lights

L Rear fog light (NSL) for surface mounting. Reflector mirrored. Lens is sealed against the casing by a rubber gasket. Cable connection via flat pin plug. Suitable for tanker vehicles! Type test conformity ref.: E2 167 Dimensions: 117 x 139 mm, height 45 mm Fixing: 2 M 6 threaded bolts, pitched at 45 mm Material: Casing, reflector and lens made of plastic Casing colour: black Weight: approx. 0.23 kg/item Bulb: not included in supply Recommended bulb: Bulb 21W/12V – Part No. 670 055 000 Bulb 21W/24V – Part No. 670 057 000 Part No. 672 540 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.06.2 Lighting Lights Rear fog lights

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.07.1 Lighting Lights Reversing lights

L Reversing light (RFL) with protective grille Light for suspended installation. Attachment by means of spherical stub and hollow M10 screw Reflector mirrored, cable connection through screw connections Dimensions: 152 x 92 mm, height 82 mm Fixing: Spherical stub with hollow M 10 screw complete with spring washer and nut Material: Casing sheet steel, Lens glass Casing colour: black, glass retaining bezel and protective grille chromium plated Weight: approx. 0.68 kg/item Bulb: not included in supply Recommended bulb: Bulb 12/24 volt 35 W Replacement part: Lens – Part No. 672 351 000 Part-No. 672 350 000

Reversing light Grey plastic casing, white reflector, universal fixing by universal articulatory metal yoke. Part-No. 672 740 000

112

97 20

147

30

46

102

ULTRA Beam reversing light Halogen lamp with very wide, homogeneous beam pattern, for upright installation, with 2-pin AMP plug connection and ready-fitted H3 24V/70-watt bulb, without protective cover, with vibration damping, swivelling base with M10 fixing screw Approved for use as reversing lamp ADR/GGVS approval Weight: approx. 0.7 kg/item Accessories: EasyConn connection cable with 2-pin EasyConn plug Bush for connection to EasyConn tail lights – Part No. 675 909 000 Part-No. 672 351 000

M10

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.07.2 Lighting Lights Reversing lights LED reversing and flood light – 12 watts • LED light in a die cast aluminium housing for maximum heat conduction, with ribbed rear housing • 4 white light LEDs • Adjustable bracket fixture for perfect angling. Swivel base with M 10 fixing screw • Polycarbonate lens • Low power consumption • Approved for use as reversing light • Complies with ECE-R-23, ECE-R-10 guidelines • 2-core 1,000 mm connecting cable with bare end • Can be combined with EasyConn lighting system (with 2-pole connector set, Part No. 675 914) Input voltage: Current consumption (12V): Wattage: Operating temperature: Rating: Lumens: Housing colour: Vibration strength: Angle of radiation: LED service life: Mark of conformity: Weight: Part No.

112 38

156

104

132,5

35

36,8

68

27

90

42

10 ~ 48 volts 0.91 amperes 12 watts -40 °C ~ 80 °C IP69K 1,000 lm black 15 G 60° approx. 50,000 hours e9 11104 0.61 kg 672 760 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.07.3 Lighting Lights Reversing lights LED reversing and flood light – 20 watts • LED light in a die cast aluminium housing for maximum heat conduction, with ribbed rear housing • 4 white light LEDs • Adjustable bracket fixture for perfect angling. Swivel base with M 10 fixing screw • Polycarbonate lens • Low power consumption • Approved for use as reversing light • Complies with ECE-R-23, ECE-R-10 guidelines • 2-core 1,000 mm connecting cable with bare end • Can be combined with EasyConn lighting system (with 2-pole connector set, Part No. 675 914)

ø 116

79

140,5

10 ~ 48 volts 0.91 amperes 20 watts -40 °C ~ 80 °C IP69K 1,700 lm black 15 G 60° approx. 50,000 hours e9 6934 1.1 kg 672 762 000

164

Input voltage: Current consumption (12V): Wattage: Operating temperature: Rating: Lumens: Housing colour: Vibration strength: Angle of radiation: LED service life: Mark of conformity: Weight: Part No.

68

27 42

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.07.4 Lighting Lights Reversing lights

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.08.1 Lighting Lights Side marker lights

L SML Side marker light with reflector For mounting on either side of vehicle, cable connection via flat pin plug, including rubber base and cable entry gland. The light has been tested in accordance with GGVS regulations. Type test conformity ref.: SM 1 E1 329/IA E1 02329 Assessment number: 950156 Enclosure type: IP 54 DIN VDE 0470 Part 1 Dimensions: 100 x 44 mm Height: approx. 33 mm Fixing: 2 fixing holes ø 5 mm, pitch 90 mm Colour: Lens yellow Material: Plastic Weight: approx. 0.044 kg/item Bulb: not included in supply Recommended bulb: Glass based bulb type W 3W/12V – Part No. 670 130 000 3W/24V – Part No. 670 131 000 Part No. 671 915 000

E1

329

TOP

PMMA

44

OOSM1

IA E1

02329

2,1

100

75

24

90

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.08.2 Lighting Lights Side marker lights Accessories for side marker light 671 915 000 Installation bracket for 671 915 000 Fixing holes: ø 5 mm Hole pitch: 45 mm in bracket Material: Plastic Weight: approx. 0.014 kg/item Part No. 671 915 000

Installation plate for 671 915 000 Fixing holes: ø 5 mm Hole pitch: 45 mm in plate Material: Plastic Weight: approx. 0.014 kg/item Part No. 671 918 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.02.08.3 Lighting Lights Side marker lights

ø 24

7

27

120

45

SML Side marker light casing with reflector and foam base For mounting on either side of vehicle, cable connection via a watertight angled gland with the cable, Part No. 671 925 000 or Part No. 671 927 000. The light is in accordance with GGVS regulations. Type test conformity ref.: SM1 E1 00 401 IA E1 02 401 Assessment number: 400 238 Enclosure type: IP 54 DIN VDE 0470 Part 1 Dimensions: 110 x 41 mm Installation depth: 35 mm Fixing: 2 fixing holes ø 4.6 mm, pitch 75 mm Colour: Lens yellow, Casing grey Material: Plastic Weight: approx. 0.030 kg/item Bulb: not included in supply Recommended bulb: Glass base bulbs type W 3W/12V – Part No. 670 130 000 3W/24V – Part No. 670 131 000 Part No. 671 920 000

75

Accessories SML gland, water-tight made up with approx. 200 mm long cable 2 x 1.0 mm2 Material: Plastic Weight: approx. 0.013 kg/item Part No. 671 925 000 SML gland, water-tight made up with approx. 700 mm long cable, sheathed, 2 x 1.0 mm2 Material: Plastic Weight: approx. 0.045 kg/item Part No. 671 927 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.02.08.4 Lighting Lights Side marker lights

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.03.01.1 Lighting Reflectors Reflectors

L Reflector, round Plastic reflector, air and water-tight with welded plastic protective baseplate Height: 7 mm Fixing: central fixing hole ø 6 mm Diameter of reflection [mm]

European type test ref.

Weight approx. [kg/item]

Part No. yellow

60

21 383

0.015

679 014 000

Reflector, round Plastic reflector, air and water-tight with welded plastic protective baseplate Height: 8 mm (7 mm)1 Fixing: self-adhering film, heat resistant and resistant to the effects of fuel Part No. red

Diameter of European Weight approx. [kg/item] reflection [mm] type test ref. 72 56

21 181 E2 330

0.025 0.013

Part No. yellow

679 112 000 – – 679 016 0001

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.03.01.2 Lighting Reflectors Reflectors Reflector, rectangular Plastic reflector, air and water-tight with welded plastic protective baseplate. Horizontal and vertical mounting possible. Height: 8 mm Fixing: 2 fixing holes ø 4 mm, pitch 70 mm Diameter of reflection

European type test ref.

Weight approx. [kg/item]

Part No. yellow

90 x 40

21 396

0.020

679 001 000

Reflector, red European type test conformity ref. I(E1) 21 317 Horizontal and vertical mounting permitted. Anti-corrosive, bright metal bezel 92 x 48. Height 6 mm, 2 screw holes ø 4.5 mm, pitched at 70 mm. Reflector red, 90 x 45 mm Material: Metal bezel aluminium, Reflector plastic Weight: approx. 0.02 kg/item Part No. 679 104 000

Reflector, rectangular Plastic reflector, air and water-tight with welded plastic protective baseplate. Height: 7 mm Fixing: self-adhering film, heat resistant and resistant to the effects of fuel Diameter of reflection

European type test ref.

Weight approx. [kg/item]

Part No. yellow

40 x 90

E1 0231374

0.023

679 007 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change.

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

67.03.01.3 Lighting Reflectors Reflectors Triangular reflector European type test conformity ref. IA E1 02 135 With bright anti-corrosive metal bezel. Length of side 165 mm, height 140 mm, thickness 6 mm. In conformity with DIN 72 618. 2 screw holes ø 6 mm, complete with bushes, pitch 70 mm. Material: Metal bezel aluminium, reflector plastic Weight: approx. 0.065 kg/item Part No. 679 203 000

Triangular reflector German test number K 11 337. Reflectors moulded into sturdy rubber casing. Length of side 172 mm, height 150 mm, thickness 15 mm. In conformity with DIN 72 618. 2 M6 x 12 bolts projecting from the rear face at a pitch of 70 mm, complete with spring washers and nuts. Material: Casing rubber, black Reflectors plastic, red Weight: approx. 0.285 kg/item Replacement part: Single reflector – Part No. 679 231 000 Part No. 679 220 000

The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy. Designs are subject to change. Gruppe67GB(0214)1

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

67.03.01.4 Lighting Reflectors Reflectors

L

Phone: +49 (0)5 41/58 22-0

Fax: +49 (0)5 41/58 22-494

email: [email protected]

Gruppe67GB(0214)1

Gebr. TITGEMEYER GmbH & Co. KG Hannoversche Straße 97 (Navigation: Hettlicher Masch 2) 49084 Osnabrück, Germany P.O. Box 43 20 49033 Osnabrück, Germany Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: [email protected] www.titgemeyer.com The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy! Designs are subject to change. Our design proposals are non-binding! TITGEMEYER and GETO are trademarks, registered trademarks or product names belonging to the respective title holder.