This is to signify that
S&Q MART KALITE GUVENLIK AS AYDINEVLER MAH. SANCAK SOK. NO. 11, MALTEPE ISTANBUL 34854 TURKEY
Inspection Agency AA-741 Type A (Third-Party) Inspection Body (Revised August 21, 2014) has met the requirements of the IAS Accreditation Criteria for Inspection Agencies (AC98), has demonstrated compliance with ISO/IEC Standard 17020:2012, General criteria for the operation of various types of bodies performing inspection, and has been accredited, commencing April 22, 2014, to provide inspection services in the approved scope of accreditation.
Patrick V. McCullen Vice President, Chief Technical Officer
C. P. Ramani, P.E. President
(see attached scope of accreditation for field(s) of inspection, including type, range, methods or procedures) Print Date: 08/22/2014
Page 1 of 9
S&Q Mart Kalite Guvenlik As AA-741 Type A (Third-Party) Inspection Body (Revised August 21, 2014) S&Q Mart Kalite Guvenlik As Ayedinevler Mah. Sancak Sok, No. 11, Maltepe Istanbul 34854 Turkey FIELDS OF INSPECTIONS Asbestos Containing Materials, Buildings and Equipment Boilers
Drilling Stem Elements Drilling Structures Line Pipes Pressure Vessel
April 22, 2014 Commencement Date Print Date: 08/22/2014
Cem Dericioglu Division Manager +90 533 227 0898
TYPE AND RANGE OF INSPECTIONS In-plant and on-site In-plant and on-site Design Specification Review Manufacturing Inspection Periodical Inspection In-plant and on-site In-plant and on-site In-plant In-plant and on-site Design Specification Review Manufacturing Inspection Periodical Inspection
INSPECTION METHODS AND PROCEDURES S&Q MART Procedure I-2.101; Directives: 83/477/EEC, 91/382/EEC, 2003/18/EC S&Q MART Procedures I-2.02; I-2.31; ASME Section I; EN Standards 303-1, 303-2, 303-3, 303-5, 12952 and 12953 Turkish Official Gazette No: 28628 dated 25.04.2013 Appendix 3 Section 2.1, ANSI/NB 23; API Standards 534, 573, 576 S&Q MART Procedure I-2.39; API RP 7G, API RP 5A5 and TH HILL Associates Inc. Standard DS-1 S&Q MART Procedure I-2.02, I-2.53, I-2.55; API RP 4G S&Q MART Procedure I-2.02; API 5L S&Q MART Procedure I-2.32; ASME Sec. VIII API 510; Turkish Official Gazette No:28628 dated 25.04.2013 Appendix 3 Section 2.1; API Standards 572, 574, 576, 579, 580, 581, 598; ANSI/NB-23, AD 2000; EN 286, EN 1442, EN13445, EN 13445
C. P. Ramani, P.E. President Page 2 of 9
S&Q Mart Kalite Guvenlik As AA-741 Type A (Third-Party) Inspection Body (Revised August 21, 2014) FIELDS OF INSPECTIONS Pipings and Pipelines
QHSE (Quality Health Safety & Environment)
Radiographic Illuminators Steel Structures
Storage Tanks
April 22, 2014 Commencement Date Print Date: 08/22/2014
TYPE AND RANGE OF INSPECTIONS In-plant and on-site Design Specification Review Manufacturing Inspection Periodical Inspection On-site
In-plant In-plant and on-site Design Specification Review Manufacturing Inspection Periodical inspection In-plant and on-site Design Specification Review Manufacturing Inspection Periodical Inspection
INSPECTION METHODS AND PROCEDURES S&Q MART Procedures I-2.02, I-2.30, I-2.52, I-2.53, I-2.54, I2.55, I-2.56, I-2.58; ASME B31.1, B31.3 and B31.8; Turkish Official Gazette No: 28628 dated 25.04.2013 Appendix 3 Section 2.3; API Standards 570, 574, 576, 579, 580, 581, 598, 1104 and API 570 S&Q MART Procedure I-2.01 (Safe Supplier and Safe Care), Safe Catering, Quality Supplier and Corporate Social Accountability S&Q MART Procedure I-2.64; EN 25580:1992 S&Q MART Procedures I-2.02, I-2.10, I-2.11, I-2.12; AWS D1.1, and D1.5; EN 1090-2 and 1090-3
S&Q MART Procedure I-2.33; API 620, API 650; API Standards 575, 576, 579, 580, 581, 598, and 653
C. P. Ramani, P.E. President Page 3 of 9
S&Q Mart Kalite Guvenlik As AA-741 Type A (Third-Party) Inspection Body (Revised August 21, 2014) FIELDS OF INSPECTIONS Building Systems
Building Structural System Inspection Building Electrical System Inspection Building Heating System Inspection Building Roof System Inspection Building Ventilation and Cooling System Inspection Building Structural System Inspection Building Earthquake Safety Measures Inspection Building Fire Safety System Inspection Green Building Assessment Inspection (Pre-LEED)
April 22, 2014 Commencement Date Print Date: 08/22/2014
TYPE AND RANGE OF INSPECTIONS On-site
INSPECTION METHODS AND PROCEDURES S&Q Mart Procedure I-2.03; ASTM Standard E 2018-08
C. P. Ramani, P.E. President Page 4 of 9
S&Q Mart Kalite Guvenlik As AA-741 Type A (Third-Party) Inspection Body (Revised August 21, 2014) FIELDS OF INSPECTIONS Building Systems (continued)
Class Inspection of Installed Building Materials
TYPE AND RANGE OF INSPECTIONS
INSPECTION METHODS AND PROCEDURES
On-site
S&Q Mart Procedure I-2.03 ASTM Standard E 2018-08
On-site
S&Q Mart Procedures I-2.03-T01, I-2.03-T02 and I-2.03-T03; ACI 228.2R-98 And ACI 228.1R-03; ASTM Standards C 597 – 09, and C 803 – 03 (10)
General Building Security System Inspection Exterior of Building Environmental Inspection Building Sound Insulation System Inspection Building Interior Finishing Works Inspection Building Water Installation System Inspection Building Heat and Humidity Installation Systems Inspection NDT - Concrete Testing for Buildings: Ultrasonic Pulse Velocity Through Concrete Penetration Resistance of Hardened Concrete Cover Meter
April 22, 2014 Commencement Date Print Date: 08/22/2014
C. P. Ramani, P.E. President Page 5 of 9
S&Q Mart Kalite Guvenlik As AA-741 Type A (Third-Party) Inspection Body (Revised August 21, 2014) FIELDS OF INSPECTIONS Plastic Fitting and Pipes Containers
Commodity Inspection (Quantity and Quality Inspection) Food Sampling with Surveillance – Before Boarding Ship, Road Tanker and Wagon Loading and Unloading Oil-products Gas Steel Textile Food pre-shipment Petrol Station Pipeline volumetric inspection Non Destructive Testing Evaluation of Radiographs, Radiographic Inspection
April 22, 2014 Commencement Date Print Date: 08/22/2014
TYPE AND RANGE OF INSPECTIONS On-Site In-plant and on-site Design Specification Review Manufacturing Inspection Periodical inspection In plant and on-site
In-plant and on-site
INSPECTION METHODS AND PROCEDURES S&Q Mart Procedure I-2.02 and I-2.12 S&Q Mart Procedure I-2.10; Container Safety Convention; EN 12079-1; ISO 1496
S&Q Mart Procedures I-20.02, I-2.90, I-2.91, I-2.92, I-2.93, I-2.94, I-2.95, I-2.96, I-2.97, I-2.98, I-2.99, I-2.100
ASTM 3 Vol. 03.03, AD 2000 HP 5/3, ASME Sec. I, ASME Sec. V, ASME Sec. VIII, ASME B31.1, ASME B31.3, ASME B31.8, API 5L, API 1104, EN 1435, ISO 5817, EN 12517, and ASME Sec. I, EN 444
C. P. Ramani, P.E. President Page 6 of 9
S&Q Mart Kalite Guvenlik As AA-741 Type A (Third-Party) Inspection Body (Revised August 21, 2014) FIELDS OF INSPECTIONS Non Destructive Testing (continued)
TYPE AND RANGE OF INSPECTIONS
INSPECTION METHODS AND PROCEDURES
In-plant and on-site
Liquid Penetrant Inspection Magnetic Particle Inspection
AD 2000 HP 5/3, ASME Sec. I, ASME Sec. V, ASME Sec. VIII, ASME B31.1, ASME B31.3, ASME B31.8, API 5L, API 1104, ISO 5817 EN 571-1, ISO 23277, EN 10228-2
Ultrasonic Inspection
AD 2000 HP 5/3, ASME Sec. I, ASME Sec. V, ASME Sec. VIII, ASME B31.1, ASME B31.3, ASME B31.8, API 5L, API 1104, ISO 5817,EN 10228-1, ISO 17638, ISO 23278
Ultrasonic TOFD & Phased Array Inspection
AD 2000 HP 5/3, ASME Sec. I, ASME Sec. V, ASME Sec. VIII, ASME B31.1, ASME B31.3, ASME B31.8, API 5L, API 1104, EN 10160, EN 10228-3, ISO 11666, ISO 17640, ISO 23279, ASTM A 435
Visual Inspection
ASME Sec. V, Art. 4, App. III and App. IX ASME Sec. VIII, Div. II Part 7, ASME Code Case 2235-9, 2557, 2558, ASME B31 Case 181-2, ASTM E2491-06, EN 583-6, CEN/TC 121/SC 5WG 2N 146 BS 7706
April 22, 2014 Commencement Date Print Date: 08/22/2014
C. P. Ramani, P.E. President Page 7 of 9
S&Q Mart Kalite Guvenlik As AA-741 Type A (Third-Party) Inspection Body (Revised August 21, 2014) FIELDS OF INSPECTIONS Non Destructive Testing (continued) Visual Inspection Railways, Rolling Stocks
Welding and other Permanent Joint Approval of Permanent Joining Procedures Metal Products (Semi-finished, Finished), Evaluation and Approval Pipes, Fittings, Line Pipes, Spools Profiles Sheet Plates Castings, Forgings Rails Portable Appliance Test – Electrical Inspections
April 22, 2014 Commencement Date Print Date: 08/22/2014
TYPE AND RANGE OF INSPECTIONS
INSPECTION METHODS AND PROCEDURES
In-plant and on-site
AD 2000 HP 5/3, ASME Sec. I, ASME Sec. V, ASME Sec. VIII, ASME B31.1, ASME B31.3, ASME B31.8, API 5L, API 1104, ISO 5817, ISO 17637 S&Q MART Procedure I-2.02, I-2.75; Directives: 2008/57/EC – Annex VI, EN 15085-5; EN 14587, EN 13674
In-plant and on-site Design Specification Review Manufacturing Inspection Periodical Inspection In-plant and on site
In-plant and on-site
In-plant and on-site Periodical Inspection
S&Q MART Procedure I-2.11; EN 1090-2, EN 13134, EN 15609, EN 15612; EN 15614; ASME Sec. IX; AWS D1.1, AWS D1.2, AWS D1.5, AWS D1.6, AD Merkblatt HP 2/1 S&Q MART Procedure I-2.02, I-2.12; API 5L (ISO 3183) TS 6047 BS 534 EN 10217 DIN 1626, EN 10216 EN 10222, EN1091 EN 1759 EN 1092 EN 1090-2; ASTM Standards A 36, A 53,A 106, A 283, A 333, A 312, 516, A 517; BS 3601; EN 1759, EN 1092, EN 10021, EN 10025, EN 10028, EN 10280, EN 10216, EN 10219, EN10222, EN 10224, EN 13480, EN13674 S&Q Mart Procedure I-2.41-T0; United Kingdom (UK) Electricity at Work regulation 1989
C. P. Ramani, P.E. President Page 8 of 9
S&Q Mart Kalite Guvenlik As AA-741 Type A (Third-Party) Inspection Body (Revised August 21, 2014) FIELDS OF INSPECTIONS Gaming Machines
TYPE AND RANGE OF INSPECTIONS In-Plant and On-site
INSPECTION METHODS AND PROCEDURES S&Q Mart Procedure I-2.105 rev0 – Gaming Machines Inspection Procedures:
Safety Relief Valve On-line Inspection
April 22, 2014 Commencement Date Print Date: 08/22/2014
In-plant and On-site
United Kingdom (UK) Gambling Commission – Gambling Codes and Practices (March 2013) United Kingdom (UK) Gambling Commission – Machine Standards Category A & B1 Alcohol and Gaming Commission of Ontario, Canada – Electronic Gaming Equipment Minimum Technical Standards (December 2007)
and Customer Requirements S&Q Mart Procedure I-285 rev1 (Safety Relied Valve On-line Inspection procedure) and Customer Requirements
C. P. Ramani, P.E. President Page 9 of 9