T he iMAT for EPB and brake service to include all makes: read and clear codes, brake bleed activation plus EPB • Applications: Land Rover | Range Rover | Volvo | Mercedes-Benz (SBC) | VAG | PSA | Ford | Jaguar | Renault (Further updates available later) • Other Apps available for download • Packed in a plastic case in EVA foam • Designed and made in the UK
Only
449.99
Suspension Bush Tool Ford KA | Fiesta | Puma | Focus
€
. 5129 Par t No
• Force screw made from high tensile steel • Can be used in situ, saving time and money • A pplication: Ford Ka (96-08) | Fiesta (96-02) | Puma (97-02) | Focus (98-05) • Not to be used with air tools | thread to be greased before use
eneration II style wheel bearings are a wheel bearing and G drive flange that cannot be separated • For 62mm | 66mm | 72mm and 85mm bearings • By using clamp collars and force pegs the tool ensures the loads of insertion are taken only on the outer race of the bearing • Replacement bar available - Part No. 0454 • A pplications: Audi A2 | Volkswagen Lupo | Fox | Polo | Multivan | Touareg | Transporter Skoda Fabia | Roomster Seat Ibiza | Cordoba
Rear Bush Tool Renault Laguna • Threaded bar manufactured from high tensile steel for maximum strength • Centre screw spare Part No. 2300 • For the removal and refitting of rear axle bushes on Laguna II OEM Ref. 1751 • Includes nut thrust bearing for ease of use • A LWAYS GREASE THE THREAD BEFORE AND AFTER USE. DO NOT USE WITH AIR TOOLS
Bearing | Bush Removal | Insertion Kit Only
169.99
€
. 5125 Part No
• Universal bush | bearing removal insertion kit • 20 sizes of adaptors ranging from Only 34-72mm (Double sized) • 4 threaded bars: Spares Part No. 2473 M10 | 2474 M12 | . 5178 Part No 2475 M14 | 2476 M16
Only
€299.99
. 5545 Part No
www.toppart.com
399.99
€
Front Wheel Bearing Tool Ford Transit • Use with impact force screw provided • Allows separation from suspension upright of the bearing housing/drive flange assemble for disc removal • Designed to be used with the hub left on the vehicle • Designed to separate the drive flange from the bearing to allow drive flange to be re-used
Only
39.99
Only
Only
€
€
. 5273 Part No
29.99
Only
€35.99
. 4939 Part No
Cooling System Pressure Test Kit - 24pc
. 5019 Part No
Only
Spline Bit Set - 6pc
• Used on tamperproof and standard fittings • Sizes: M12 | M14 | M16 | M18 x 45mm long and M12 | M14 | M16 | M18 x 78mm long in 1/2"D • Tamperproof applications include VAG hubs | calipers | suspension and drain plugs • Black phosphate finish
• Impact quality • Manufactured from Chrome Molybdenum • Sizes: M8 | M10 | M12 | M14 | M16 | M18 • Metal storage case • Essential for confined access
Spline Bit Set - 4pc
Torx Plus® Bit Set - 23pc
• Popular sizes for VAG vehicles • Sizes: M12 | M14 | M16 | M18 x 76mm • M18 for rear hubs on Golf M16 for rear hubs on Sharan M12 for rear hubs on Touran M14 rear hubs on LT/Transporter • Manufactured in quality Only Chrome Vanadium • Also suitable for other general applications . 4392 Part No • Supplied on socket rail
• Accessories include a 1/4"D x 1/4" bit holder | 3/8"D x 10mm bit driver | Magnetic stainless steel bit holder with a Quick Chuck shank • Handles Torx Plus® fixings which gives greater torque and minimises wear on fixings • Sizes: T10 | T15 | T20 | T25 | T30 | T40 | T45 | T50 | T55 | T60 TS tamperproof: TP10 | TP15 | TP20 | TP25 | TP30 | TP40 | TP45 | TP50 | TP55 | TP60 • Bits are manufactured from high quality Silicon steel
29.99
€
Torx Plus® Bit Set - 9pc • Sockets made from Chrome Vanadium bits made from S2 Silicon Steel for strength • 6 point Torx Plus® profile TP10 | TP15 | TP20 | TP25 | TP27 | TP30 | TP40 | TP45 | TP50 • Not suitable for standard Torx fixings • Improved connection between the bit and fixings • Supplied with socket rail for easy storage
Only
6.99
. 5218 Part No
6.99
Brake Caliper Tool Set - 37pc • Comprehensive brake caliper tool set for wind back and push back systems
• Can be used on FWD and RWD
• Fits most models
• Manufactured from Chrome Molybdenum for strength
• Left and right hand threaded wind back tools
79.99
€
. 4288 Par t No
• Essential for the removal of the water pump • Also alignment of the engine at top dead centre • Specially for Volkswagen T5 and Touareg 2.5D • It is beneficial to change the water pump when removing the cylinder head • A - Special Wrench OEM ref T10225 B - Puller OEM ref T10221 A C - Adjusting Tool OEM ref T10222A
Oil ATF Dispenser 7 Litre
249.99
€
. 4792 Part No
€19.99
CO2 Leak Detector • Leak detection that reacts with C02 and changes colour • Checks for cracked cylinder heads and blockages, blown gaskets etc • Supplied with a cone adaptor • Quick and easy to use • Fluid available separately - Part No. 5526
18.99
. 5617 Part No
. 5524 Part No
• A pplication: Oil filters on Ford Durotorq TDCI (DW12C) diesel engines • S Max | Mondeo | Galaxy | Euro 6 compliant engines from 2010 onwards • Bi Hex x 1/2"D • OEM 303-1579
• For use on filter housings with screw thread attachments • Prevents oil spillage while changing the filter • Good for the environment Only
18.99
Only
39.99
Belt Tensioner Wrench Set - 9pc
€
€
. 5234 Part No
Fuel Filter Socket - 1/2"D
Only
79.99
• For removing and fitting diesel fuel filters • A pplications: 2.0 | 2.2 HD engines fitted to Peugeot | Citroën | Ford | Mitsubishi | Volvo • 1/2"D x 27mm • Prevents air leaks
€
. 5360 Part No
• A comprehensive set of wrench adaptors for use on belt tensioners • Includes bar with locking system • For tensioners on auxiliary and timing pulleys • Includes sizes 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19mm • Manufactured from Chrome Molybdenum
• Includes 30 adaptors and 5 reaction plates • A pplications: Renault | Citroën | Audi | BMW | Ford | Lancia | Proton | Rover | Volkswagen | Mini Cooper | Nissan | Saab | Honda | Alfa Romeo | Opel/Vauxhall | Subaru | Mazda | Mitsubishi | Volvo | Fiat | Mercedes-Benz
Only
89.99
€
. 5037 Par t No
Only
7.99
€
. 5270 Part No
Brake Caliper Guide Thread Repair Kit • Complete with Titanium coated core drill • Tap and 10 threaded inserts (Spare threaded inserts available Part No. 5038)
Fuel Line Pliers - VAG • For use on 'tag style' hose clips • Designed for Audi | Seat | Skoda and Volkswagen • Wide jaw opening • Spring loaded
• Suitable for Volkswagen Audi Group | Opel/Vauxhall | Ford • Supplied in a blow mould case
Only
119.99
€
. 5605 Par t No
www.toppart.com
59.99
Oil Filter Drain Tool - Toyota/Lexus
. 5365 Part No
Only
€
Crows Foot Oil Wrench Ford - 27mm
€
. 5213 Part No
Only
TORX PLUS® is a registered trade mark of Acument Global Technologies
Brake Disc Removal Tool - Ford Transit
Only
Water Pump Removal Kit - VAG
Only
Only
. 5614 Part No
. 4639 Part No
• Manually operated • Complete with a range of ATF adaptors • L arge visual measurement will identify the amount dispensed • Will dispense 70cc per cycle
• Sizes: 10EP | 11EP | 12EP | 14EP | 16EP | 18EP | 20EP • Allows power to be transfered to Torx Plus® fastenings without damage • Manufactured from 50bv30 steel • Supplied on a socket rail
. 50 63 Part No
• OEM Code 204-345B
. 5031 Part No
Torx Plus® Socket Set 3/8"D - 7pc
• Impact quality • Correctly hardened • For use on rear wheel bearing assemblies on Golf/Jetta and other MK4 Chassis vehicles • Made from Chrome Only Molybdenum
• Removes front brake discs without damaging the bearings
19.99
€
TORX PLUS® is a registered trade mark of Acument Global Technologies
Spline Socket Bit M18 - 1/2"D
€
Only
TORX PLUS® is a registered trade mark of Acument Global Technologies
Spline Bit M17 - 1/2"D • For use on the rear axle on Volkswagen Passat variant 2007 1.9TDi • Manufactured from Chrome Vanadium
• 1/2"D • Manufactured from Chrome Molybdenum in black Phosphate finish • Sizes: M14 | M16 | M18 x 43mm | 78mm long • Essential for VAG hubs and calipers on LT, Transporter, Golf and Sharan
• Including 16 individually sized adaptors pressure testing pump with gauge 2 connectors for use with No 3 adaptor and handle • Suitable for a large range of vehicles • Thermometer included • Also checks the leakage on original radiator cap • Application list and instructions included
289.99
€
Spline Bit Set - 6pc
Spline Bit Set - 8pc
€
109.99
€
www.toppart.com
Only
19.99
€
. 4812 Part No
Only
145.99
Bosch Injector Dismantling Tool 1/2"D
Damaged Glow Plug Removal Set
• For removing the internal part of Bosch injectors • Tamperproof • 10mm Hex bit
• For removing broken or damaged glow plugs • Removes 8mm and 10mm glow plugs • Manufactured from Selected steel • Packed in a blow case
Only
18.99
Pre-loaded with DPF | FAP
€
. 5205 Part No
• The iMAT for DPF (Diesel Particulate Filter) is pre-loaded with the software required to perform the following service and diagnostic tasks on DPF and FAP equipped vehicles • Regenerates Diesel Particulate Filters • Resets EOLYS Additive Lights • ID DPF Fault Codes • Filter Replacement Function and Static Regeneration • Other Apps available for download
€
. 4761 Part No
Only
75.99
€ Injector Puller - TDi PD
• Manufactured from Chrome Molybdenum and S45c steel for strength • A pplications 1.4 SDi/TDi | 1.9D/SDI/TDi (PD) | 2.0TDi (PD) 4-valves 2.5 TDi 2.5TDi (PD) | 2.8TDi (PD) 2.7/3.0 TDi • Essential tool for servicing diesel engines • See also Part No. 5479 for removing the clamping bolt
• Designed and made in the UK Only
€
135.99
€
• For bleeding or priming diesel systems • For connection in-line with the vehicles low pressure delivery system • The clear pipes allow any air bubbles in the system to be seen • A pplications: Ford | PSA | GM | Fiat | Rover | Land Rover | Renault | Mercedes-Benz
. 5206 Part No
549.99
. 5592 Part No
Diesel Priming and Bleeding Kit
Only
Only
Impact Glow Plug Removal Kit - 1/4"D • Supplied with 3 special impact glow plug sockets: 12mm | 10mm | 8mm • Wrench has four pre-set torque settings and is reversible • Also supplied with a universal joint for ease of access • Can be used with other impact sockets to loosen and undo low-torque fixings where conditions (corrosion or carbon build-up) have led to tightness and seizure
Only
199.99
€129.99
. 5262 Part No
• Re-threading kit for 8mm |10mm | 12mm glow plugs • Includes: Taps: M8 x 1.0 | M10 x 1.0 | M10 x 1.25 | M12 x 1.0 | M12 x 1.25 | M14 x 1.25 Coil: M8 x 1.0(I) | M10 x 1.0 (E) | M10 x 1.0 (I) | M12 x 1.0 (I) | M12 x 1.25 (I) | M14 x 1.25 (E) • Chrome Vanadium with Black Phosphate finish • Replaceable consumable items available • Essential Service tool for alloy cylinder head • Packed in a blow case
Diesel Injector Removal Set - 4pc Delphi | Bosch
Only
89.99
€
• Set comes complete with an extractor key for removing the inner part of the Bosch injectors • Perform the task without resorting to using a sliding hammer • Also suitable for removing the injectors without removing the cylinder head on Mercedes-Benz Sprinter | ML270 | E-Class | C-Class | Grand Cherokee 2.7 crd manufactured from 2000 • Storage case provided
Only
89.99
A
€
. 4760 • Specifically designed for removing Part No Delphi/Bosch diesel injectors • Adaptors can also be used with an air tool to loosen the injectors by vibration • Suitable for use with the Laser Slide Hammer with 5/8" UNF thread - Part No. 4811 • Includes 3 adaptors and special tool for removing the internal part of the Bosch injectors
. 4762 Part No
G
B
F
. 5498 Part No
• Fits specialist applications such as Nissan automatic transmissions and clutches • The sockets maximises torque transfer and increases tool engagement, eliminating camout • Sizes include 10EPL | 12EPL | 14EPL | 16EPL | 18EPL | 20EPL x 37mm long • EPL sockets suitable for use on Torx Plus® fixings. Torx Plus® is a registered trademark of Acument intellectual properties • Made from Chrome Vanadium
Only
18.99
€
. 5150 Part No
• Includes M10S (special profile 6 pnt socket) for Toyota idler gear centre fixings, 20mm 10 point socket for Honda Civic lower control arm bolts • M 6S | M8S | M12S (special profile 6 pnt) for Nissan and Renault clutches, cylinder heads and balance shaft fixings • 8TS special 3 point profile for Nissan Balance shaft fixings • 10 and 12mm 5 sided (pentagon) sockets for Nissan brake and fuel pump fixings 19mm 5 sided socket for Citroën, Peugeot and Renault brake calliper mounting plate fixings • 14mm 5 sided socket for Smart car, Astra G and Zafira brake calliper mounting plate fixings (available as 4149)
Clutch Compressor Kit
Differential Filter Spanner - 46mm
• For assembling and fitting self adjusting clutches • Used on: Audi | BMW | Fiat | Mercedes-Benz | Renault | Vauxhall/Opel and Volvo • 48 pieces for ensuring the correct tool is available • Designed for use with 3 and 4 fixing points and maintains the adaptor ring in the correct position • Supplied in a blow mould case
• For removing and refitting differential filters - Haldex • 46mm offset • Complete with 5mm Hex key • Suitable for filters fitted to Audi TT | Volkswagen 4 motion Golf | Passat models • OEM Tool code T10066
Only
499.99
C
€
D
Impact Diesel Injector Remover - VAG
34.99
€
Specialist Automotive Socket Set - 1/2"D
EPL Sockets - 6pc
Diesel Injector Puller Set
Only
. 5455 Part No
€ Glow Plug Thread Repair Kit - 31pc
Only
. 4845 Part No
€
Only
€
59.99
. 4640 Part No
Glow Plug Puller Kit - 7pc • A . External grip (7.7mm internal Ø) Includes size 4 (6.0 mm) contraction collet B. External grip (6.8mm internal Ø) Includes size 3 (5.0 mm) contraction collet C. Contraction collet: size 3 (5.0 mm) D. Contraction collet: size 2 (3.6 mm) Only E. Contraction collet: size 1 (2.7 mm) F. T-bar slide hammer/puller G. Internal puller (expansion collet) . 5362 Part No • Manufactured from S45C steel and SUS303 for strength • Packed in a durable storage case
www.toppart.com
25.99
. 3938 Part No
F
• Designed primarily for removing tight diesel injectors from Volkswagen engines • Includes a 0.5kg slide hammer with a series of adaptors • Two adaptors with threads for connection directly on to the injector and two with hook profiles which are engaged beneath the injector shell • Using the Slide Hammer with a series of knocking actions, the tight injector can often be released • Equivalent to VAG T10055 /1 /2 /3, injector puller for the PD type engines
. 5478 Part No
109.99
€
Transmission and Oil Dip Stick - 4pc • Four colour coded dipsticks for motor control and automatic gearboxes where no dipstick is supplied with the vehicle • Blue 930mm long for engine oil on M112 | M113 | 646 | 647 | 648 • Yellow 930mm long for engine oil on 103.943 | 984 | 985 | 104 | 111 | 119 | 120 | 137.603 | 913 | 963 | 97 | 604 | 605 | 606 | 611 | 612 | 613 • Yellow continued: 628 | 612 | 965 • Red 920mm long for gearbox oil on 722.7_P | 722.8_P | 716.5_V • Green 1220mm long for gearbox oil on 722.6_L | G | P | V
Only
79.99
€
. 5289 Part No
www.toppart.com
Only
89.99
Rear Bush Installer - VAG
€
• This tool is essential for replacing the bonded rubber | plastic rear axle mounting bushes . 4188 fitted to VAG vehicles, without removing the rear axle assembly from the vehicle Part No • It's fine thread and thrust bearing allows the bush to be fitted quickly and easily without causing damage • The drive screw and nut should be lubricated before and after every use. Spares are available: Coarse Bar (0964), Fine Bar (1143) Nut and Washer (1027), Nut and Bearing (1028) • Primarily for use with Audi A3, Volkswagen Gold IV, Bora 1.4 | 1.6 | 1.8 | 2.0 and 1.9D (01-03) • Supplied in a metal case with foam tray
• Designed for the front wishbone rear bush (Console bush) • A pplications: Volkswagen Polo (02-07) | Skoda Fabia (02-07) and Seat Ibiza 02 onwards after Chassis 6K-2-000 001)nd Seat Cordoba (02- 07) | Seat Cordoba | Seat Ibiza | Skoda Fabia | Volkswagen Polo | Volkswagen Fox. All 02-07 • OEM Ref T10030 | 3301 | 473 | T30035 Only • Bar is manufactured from high tensile steel (Spare Part No. 0775) . 4748 • Thrust Nut Assembly (Spare Part No. 0776) Part No
€189.99
Only
169.99
€
. 5558 Part No
Bush Tool - BMW Mini • For Mini Cooper R50/R53 (W10 | W17 | W11) • For the removal and installation of front control arm rear bushes • Left and Right arm bush replacement on vehicle • Bush Ref 31 12 6 757 561 | 31 12 6 757 562 • ALWAYS GREASE THREADED BAR
Rear Axle Bush Tool BMW 5 Series Saloon Only E39
Rear Suspension Ball Joint Bush Tool - BMW • Suitable for extraction and replacement of the rear suspension ball joint bushes without having to remove it from the vehicle • Suitable for BMW 5 (E39) | 7 (E38) Series • Efficient nut and thrust bearing assembly (Part No. 1818) • Bar made from high tensile steel for extra strength (Part No. 1817) • NOT TO BE USED WITH IMPACT TOOLS nly
149.99 O
€
. 4787 Part No
Only
€
Only
134.99
€
. 4796 Part No
279.99
. 4780 Part No • Suitable for BMW 5 Series (Saloon only) E39 • This extraction and replacement tool enables easy changing of the rear axle carrier mounting bushes without removing the unit from the vehicle • Bar made from high tensile steel for extra strength (Part No. 1812) • Efficient nut and thrust bearing assembly (Part No. 1813) • NOT TO BE USED WITH IMPACT TOOLS
• Suitable for the extraction and replacement of bushes in situ without removing the rear carrier assembly • Suitable for use on BMW X5 series (E53 models only) • Efficient nut and thrust bearing assembly (Part No. 1794) • Bar made from high tensile steel for extra strength (Part No. 1795) • NOT TO BE USED WITH AIR TOOLS. ALWAYS GREASE THREADED BAR
• For removing ball joints, control arms and suspension joints • Length 100cm, outside diameter 30mm • 6 way adjustable tube in two sections for storage
299.99
Only
89.99
€
€
. 4781 Part No
. 5627 Part No
Rack End Remover and Installer 28mm - 35mm
• Suitable for BMW 5-Series, Touring E38 | E39 • It enables the removal and replacement of the suspension bushes whilst in-situ • Efficient nut and thrust bearing assembly (Part No. 1810) • Bar made from high tensile steel for extra strength (Part No. 1811) • NOT TO BE USED WITH IMPACT TOOLS
Only
75.99
€
369.99
€
. 4769 Part No
Rear Trailing Arm Suspension Bush Tool - BMW 3 Series
Rear Suspension Bush Tool - Vauxhal
• Removal and installation of front control arm bushes • For BMW Mini R50 and R53 chassis (W10 | W11 | W17) • Thrust Nut Assembly (Part No. 1759) • Centre Screw (Part No. 1758) • A LWAYS LUBRICATE BEFORE AND AFTER USE
• Suitable for BMW 3 Series - (E36 | E46 | E46 Compact) • Without the removal of the trailing arm • The centre screw is manufactured from high strength steels (Part No. 1792) • The thrust nut design enhance the ease of use (Part No. 1803) • NOT SUITABLE FOR USE WITH IMPACT TOOLS
• For removing and replacing the rear upper and lower bushes on trailing arm suspensions • For Vauxhall Vectra models 1.6 | 1.8 | 2.0 (95-) | 2.5 (96-) • Suitable for use in situ, without removing the trailing arm assembly from the vehicle • Efficient nut and thrust bearing assembly (Part No. 1816) • Bar made from high tensile steel for extra strength (Part No. 1815)
Only
174.99
€
€95.99
Front Control Arm Bush Tool - BMW Mini
. 4767 Part No
199.99
. 4779 Part No
www.toppart.com
. 4870 Part No
• Suitable for the removal and installation of the rear suspension bushes on Ford Fiesta/KA • The threaded bar and thrust nut assemble is manufactured from high tensile steel for strength and are available separately: Centre Screw Part No. 2137 and replacement Nut assemble Part No. 2138 • NOT TO BE USED WITH AN AIR GUN • ALWAYS LUBRICATE BEFORE AND AFTER USE
Only
169.99
€
. 50 4 5 Part No
Rack End Remover and Installer 35-45mm
• Specifically designed for Volkswagen Audi Group Vehicles • 24 | 30 | 32mm impact sockets • 14 | 17mm impact Hex key • Manufactured from high quality Chrome Molybdenum • Supplied in a metal case
• Enables the removal with the track rod in situ • Designed to remove the axle joint/track rod from the steering rack • Can be used with 1/2"D wrench or 27mm spanner
€
Only
79.99
€
. 4765 Part No
25.99
. 4925 Part No
. 4793 Part No
Only
€
259.99
€
Hub Nut Socket Set - 1/2"D VAG
Only
Only
Only
• Telescopic spring compressor • It is now possible to remove and replace the coil springs on the wishbone without dismantling the axle saving valuable time and money • Supplied with two sizes of pressure plate • Also suitable for use on multi-link independent suspensions • Tool Extends from 70 to 393 mm. Max load 14,900 Kgf
. 5122 Part No
Only
. 4 87 1 Part No
Suspension Bush Tool - Fiesta | Ka
• Can be used with a 1/2"D wrench or a 27mm spanner • Length 400mm • Other size available
Rear Axle Bush Tool - BMW Touring Only E38 | E39
399.99
€
Coil Spring Compressor Mercedes-Benz
Suspension Arm Lever
Only
Only
• Specifically designed for Macpherson struts fitted to most vehicles • Complete with robust shaft which extends up to 300mm • 3 size of pressure plates from 80mm