The Complete Big Bore Hydraulic Solution for Medium and High Pressure Applications

The Complete Big Bore Hydraulic Solution for the Highest Performance Increasing Pressure and Flow Rates You are looking for hoses that deliver higher working pressures and more power through a higher flow rate? Or do you prefer hoses for heavy-duty applications with an abrasion-resistant cover for a longer service life?

The new complete Big Bore hose range meets both aspects. Due to the severe applications, Parker’s Big Bore hoses are coming with TC cover for best abrasion resistance and MSHA approved. Based on

the enhanced hose diameters and in combination with very high pressures, flow rates can be increased up to 1642 l/min. with size -48. This eliminates the need of numerous pressure lines and results in a cost reduction for connectors.

Target Markets QQ Tunneling QQ Mining QQ Off

Highway Mobile Equipment QQ Processing Industry

Tunneling

Mining

Off Highway Mobile Equipment

Processing Industry

Medium Pressure Parkrimp No-Skive Big Bore up to 7.0 MPa 462TC-40/462TC-48 QQ No-Skive

hose construction – Compact design QQ Working pressure 7.0 MPa (1015 psi) with 4:1 safety factor – Dynamic application, impulse tested QQ Highly abrasion resistant , MSHA approved QQ Nitrile (NBR) inner tube – extended fluid compatibility QQ Exceeding EN/ISO specifications for pressure, bend radius and abrasion resistance QQ High flexibility in spite of big size QQ 2piece fittings for use with adjustable crimper only (47 series nipple and 10048 shell)

High Pressure ParLock Skive Big Bore Spiral up 35.0 MPa R35TC-40/RS35TC-48 QQ Interlock

skive technology QQ Very high working pressure of 35.0 MPa (5000 psi) QQ High abrasion resistant prolongs hose life, minimizes downtime and eliminates extra cost for additional protection sleeves – MSHA approved QQ Approved with Interlock V6 series fittings

R35TC-40

RS35TC-48

QQ Safety

QQ Safety

factor of 4:1 QQ Impulse tested to more than 1.0 million cycles at +120 °C QQ Extra strong 6-spiral construction for high-flex-impulse and high-vibration applications QQ NEW: ISO 6162-2 flange

factor of 2.5:1 according ISO 6708-D QQ Impulse tested at 1.0 million cycles at +120 °C and 21.0 MPa working pressure QQ Extra strong 6-spiral construction for high-vibration applications QQ NEW: ISO 6162-2 flange

Improved flow rate Fluid speed 6 m/s Flow rate size -32 736 l/min

+ 55 %

Flow rate size -40 1141 l/min

+ 44 %

Flow rate size -48 1642 l/min

Ø 76.2 mm Ø 51 mm

Ø 63.5 mm

Medium Pressure Parkrimp No-Skive Big Bore Hose and Fittings

462TC Elite No-Skive

Compact Tough Cover Exceeds EN 857-2SC – ISO 11237 Type 2SC

• No-Skive hose construction – Compact design • Nitrile (NBR) inner tube – extended fluid compatibility • Exceeding EN/ISO specifications for pressure, bend radius and abrasion resistance • Highly abrasion resistant MSHA approved

Primary Applications Demanding medium pressure hydraulic applications in all markets

Type Approvals Details please find in catalogue C4400 on pages Ab-16 to Ab-19

Applicable Specifications Exceeds EN 857-2SC – ISO 11237 Type 2SC

Recommended Fluids

Construction Tube: Nitrile (NBR) Reinforcement: Two high-tensile steel wire braids Cover: MSHA approved synthetic rubber

Temperature Range ..

-40 °C up to +100 °C Exception: Air ............................. max. +70 °C Water ........................ max. +85 °C

Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section in catalogue C4400 on pages Ab-24 to Ab-32 for more detailed information.

Fitting Series

2piece 48

Pressure Rating Part Number

462TC

Hose

462TC-40 462TC-48

Hose I.D.

Hose O.D.

max. working pressure

min. burst pressure

min. bend radius

weight

DN DN

Inch Zoll

Size size

mm mm

mm OD

MPa MPa1

psi psi1

MPa MPa2

psi psi2

mm Bend

kg weight

63 76

2 1/2 3

-40 -48

63.5 76.2

76.0 87.5

7.0 7.0

1015 1015

28.0 28.0

4060 4060

760 760

3.00 3.30

The combination of high temperature and high pressure could reduce the hose life.

Hose layline example 462TC-40 WP 7,0 MPa (1015 PSI) MSHA IC 40/26 | • • 63,5 mm (2 1/2) Made in Italy

Medium Pressure Parkrimp No-Skive Fittings

QQ Elite No-Skive hoses 462TC-

40 and -48 with No-Skive 2piece fittings series 48 offers high performance exceeding the EN requirements QQ Approved hose and fitting compatibility: „one manufacturer, one source“ QQ Field tested, proven reliability QQ High flex-impulse applications QQ High vibration applications QQ optimal design – optimal compatibility

2piece 48 series

10048

No-Skive shell

Part Number

Shell 100V6

B

10048-40 10048-48

Hose I.D.

B

DN DN

Inch Zoll

Size size

mm mm

mm B

63 76

2 1/2 3

-40 -48

63.5 76.2

67 75

Also available in stainless steel please add suffix „C“

S0

SteckO® fitting Straight

Part Number

KS047-40-40

A

B

F

DN

Inch

Hose I.D. Size

mm

mm

mm

mm

63

2 1/2

-40

63.5

142

80

79

Also available in stainless steel please add suffix „C“

15

SAE Code 61 – Flange Head – Straight ISO 12151-3-S-L – SFL - 3000 psi

Part Number

Flang 6A

Flange_ABF

K1547-40-40 K1547-48-40 K1547-48-48

Flange

A

B

F

DN DN

Inch Zoll

Hose I.D. Size size

mm mm

Inch FLANGE

mm A

mm B

mm F

63 63 76

2 1/2 2 1/2 3

-40 -40 -48

63.5 63.5 76.2

2 1/2 3 3

127 137 155

65 75 85.5

84 102 102

Also available in stainless steel please add suffix „C“

01

Male NPTF Pipe – Rigid – Straight SAE J476A / J516 – AGN

Part Number

SAE 01

NPTF_ABH

K01V4-12-12 K01V4-16-16

Thread

A

B

H

DN DN

Inch Zoll

Hose I.D. Size size

mm mm

Inch NPTF

mm A

mm B

mm H

19 25

3/4 1

-12 -16

19.1 25.4

3/4x14 1x11 1/2

100 116.5

38.3 43.9

30 36

High Pressure ParLock Big Bore Hose and Fittings

R35TC-40/RS35TC-48 ParLock Multispiral

Exceeds ISO 3862 Type R13 – Parker Specifications

Primary Applications

• Interlock skive technology • Reinforcement of six high tensile steel wires • Constant working pressure of 35.0 MPa • Highly abrasion resistant MSHA approved • Hose is suitable for temporary immersion in mineral oil up to 70 °C with frequent inspections

General high pressure hydraulic applications

Type Approvals Details please find in catalogue C4400 on pages Ab-16 to Ab-19

Applicable Specifications Exceeds ISO 3862 Type R13 – Parker Specifications

Construction

Recommended Fluids

Tube: Synthetic rubber Reinforcement: Six spirals high-tensile steel wire Cover: High abrasion resistance MSHA approved synthetic rubber

Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section in catalogue C4400 on pages Ab-24 to Ab-32 for more detailed information.

Temperature Range ... -40 °C up to +125 °C Exception: Air .............................. max. +70 °C Water ......................... max. +85 °C

Fitting Series

V6

Internal and external skiving Pressure Rating Part Number

R35TC_RS35TC R35TC-40 RS35TC-48 RS35TC-48

Hose I.D. Hose

Hose O.D.

max. working pressure

min. burst pressure

min. bend radius

weight

DN DN

Inch Zoll

Size size

mm mm

mm OD

MPa MPa1

psi psi1

MPa MPa2

psi psi2

mm Bend

kg weight

63 76 76

2 1/2 3 3

-40 -48 -48

63.5 76.2 76.2

84.50 96.00 96.00

35.0 35.0* 21.0**

5000 5000* 3040**

140.0 88.0 88.0

20000 12750 12750

800 900 900

9.0 10.0 10.0

Replace the hose when any deformation or damage on the hose cover are visible. The combination of high temperature and high pressure could reduce the hose life.

* 35 MPa: Static applications according to ISO 6807-D * 21 MPa: Dynamic hydraulic application safety factor > 4:1

Hose layline example R35TC-40 WP 35,0 MPa (5000 PSI) MSHA IC 40/26 | • • EXCEED ISO3862 - SAE100R13

High Pressure ParLock Fittings

QQ R35TC-40/RS35TC-48 hose

V6 series

100V6

Interlock In-/Outside Skive shell

Part Number

Shell 100V6

Hose I.D.

B

100V6-40 100V6-48

6A

Inch Zoll

Size size

mm mm

mm B

63 76

2 1/2 3

-40 -48

63.5 76.2

134 110

ISO 6162-2 Flange – Straight ISO 12151-3-S-S – SFS

Hose I.D.

Flange_ABF

K6AV6-40-40 K6AV6-48-40 K6AV6-48-48

01

Flange

A

B

F

DN DN

Inch Zoll

Size size

mm mm

Inch FLANGE

mm A

mm B

mm F

63 63 76

2 1/2 2 1/2 3

-40 -40 -48

63.5 63.5 76.2

2 1/2 3 3

253 250 240

118 115 133

108 132 132

Male NPTF Pipe – Rigid – Straight SAE J476A / J516 – AGN

Part Number

SAE 01

NPTF_ABH

K01V4-12-12 K01V4-16-16

X5 X5 Fitting Part Number Flang X5 Flange_AB

B

DN DN

Part Number

Flang 6A

with ParLock fitting series V6 offers high performance exceeding the EN requirements QQ Approved hose and fitting compatibility: „one manufacturer, one source“ QQ Field tested, proven reliability QQ High flex-impulse applications QQ High vibration applications QQ ParLock: optimal design – optimal compatibility

KX5V6-20-20 KX5V6-24-24 KX5V6-32-32

Thread

A

B

H

DN DN

Inch Zoll

Hose I.D. Size size

mm mm

Inch NPTF

mm A

mm B

mm H

19 25

3/4 1

-12 -16

19.1 25.4

3/4x14 1x11 1/2

100 116.5

38.3 43.9

30 36

Flange – Straight Full flange system for ISO 6162-1 or ISO 6162-2 Flange Seal Part Number Part Number R640-CFX R640-CFX R648-CFX

XRG-40 XRG-40 XRG-48

Retaining Ring Part Number R40X R40X R48X

Hose I.D.

DN DN 31 38 51

Zoll Inch 1 1/4 1 1/2 2

size Size -20 -24 -32

mm mm 31.8 38.1 50.8

Flange

A

B

FLANGE Inch

A mm 152.3 159.3 188

B mm 61.3 63.3 78

1 1/4 1 1/2 2

Parker Worldwide Europe, Middle East, Africa AE – United Arab Emirates, Dubai Tel: +971 4 8127100 [email protected] AT – Austria, Wiener Neustadt Tel: +43 (0)2622 23501-0 [email protected] AT – Eastern Europe, Wiener Neustadt Tel: +43 (0)2622 23501 900 [email protected]

IE – Ireland, Dublin Tel: +353 (0)1 466 6370 [email protected] IT – Italy, Corsico (MI) Tel: +39 02 45 19 21 [email protected] KZ – Kazakhstan, Almaty Tel: +7 7272 505 800 [email protected] NL – The Netherlands, Oldenzaal Tel: +31 (0)541 585 000 [email protected]

North America CA – Canada, Milton, Ontario Tel: +1 905 693 3000 US – USA, Cleveland Tel: +1 216 896 3000

Asia Pacific AU – Australia, Castle Hill Tel: +61 (0)2-9634 7777 CN – China, Shanghai Tel: +86 21 2899 5000

AZ – Azerbaijan, Baku Tel: +994 50 2233 458 [email protected]

NO – Norway, Asker Tel: +47 66 75 34 00 [email protected]

BE/LU – Belgium, Nivelles Tel: +32 (0)67 280 900 [email protected]

PL – Poland, Warsaw Tel: +48 (0)22 573 24 00 [email protected]

BY – Belarus, Minsk Tel: +375 17 209 9399 [email protected]

PT – Portugal, Leca da Palmeira Tel: +351 22 999 7360 [email protected]

CH – Switzerland, Etoy Tel: +41 (0)21 821 87 00 [email protected]

RO – Romania, Bucharest Tel: +40 21 252 1382 [email protected]

CZ – Czech Republic, Klecany Tel: +420 284 083 111 [email protected]

RU – Russia, Moscow Tel: +7 495 645-2156 [email protected]

DE – Germany, Kaarst Tel: +49 (0)2131 4016 0 [email protected]

SE – Sweden, Spånga Tel: +46 (0)8 59 79 50 00 [email protected]

DK – Denmark, Ballerup Tel: +45 43 56 04 00 [email protected]

SK – Slovakia, Banská Bystrica Tel: +421 484 162 252 [email protected]

ES – Spain, Madrid Tel: +34 902 330 001 [email protected]

SL – Slovenia, Novo Mesto Tel: +386 7 337 6650 [email protected]

South America

FI – Finland, Vantaa Tel: +358 (0)20 753 2500 [email protected]

TR – Turkey, Istanbul Tel: +90 216 4997081 [email protected]

BR – Brazil, Sao Jose dos Campos Tel: +55 12 4009 3500

FR – France, Contamine s/Arve Tel: +33 (0)4 50 25 80 25 [email protected]

UA – Ukraine, Kiev Tel +380 44 494 2731 [email protected]

GR – Greece, Athens Tel: +30 210 933 6450 [email protected]

UK – United Kingdom, Warwick Tel: +44 (0)1926 317 878 [email protected]

HU – Hungary, Budapest Tel: +36 1 220 4155 [email protected]

ZA – South Africa, Kempton Park Tel: +27 (0)11 961 0700 [email protected]

HK – Hong Kong Tel: +852 2428 8008 IN – India, Mumbai Tel: +91 22 6513 7081-85 JP – Japan, Tokyo Tel: +81 (0)3 6408 3901 KR – South Korea, Seoul Tel: +82 2 559 0400 MY – Malaysia, Shah Alam Tel: +60 3 7849 0800 NZ – New Zealand, Mt Wellington Tel: +64 9 574 1744 SG – Singapore Tel: +65 6887 6300 TH – Thailand, Bangkok Tel: +662 717 8140 TW – Taiwan, Taipei Tel: +886 2 2298 8987

AR – Argentina, Buenos Aires Tel: +54 3327 44 4129

MX – Mexico, Apodaca Tel: +52 81 8156 6000 VE – Venezuela, Caracas Tel: +58 212 238 5422

Ed. 2010-09-29

CL – Chile, Santiago Tel: +56 2 623 1216

European Product Information Centre Free phone: 00 800 27 27 5374 (from AT, BE, CH, CZ, DE, DK, EE, ES, FI, FR, IE, IL, IS, IT, LU, MT, NL, NO, PL, PT, RU, SE, SK, UK, ZA)

© 2015 Parker Hannifin Corporation. All rights reserved.

Parker Hannifin Ltd. Tachbrook Park Drive Tachbrook Park, Warwick, CV34 6TU United Kingdom Tel.: +44 (0) 1926 317 878 Fax: +44 (0) 1926 317 855 [email protected] www.parker.com

Bulletin BUL/4480-B45/UK 2014-08 punctum

Your local authorized Parker distributor