Technical Specifications

General Manual Technical Specifications Taximeter System Clock Segment Status Monitor Battery 4.915.200 U8 Z80 CPU U4 EPROM 64 K U3 RAM 32/12...
1 downloads 4 Views 3MB Size
General Manual

Technical Specifications

Taximeter System Clock

Segment Status Monitor

Battery

4.915.200

U8 Z80 CPU

U4 EPROM 64 K

U3 RAM 32/128 K

Clock Calendar 32.768

Display Manager

Baud rate Generator 1

UART 1

Level Convert U 10

UART 2

Display 1

U5 Power Driver

Display 2

Com 1 Multiplexer Data Protection

Baud rate Generator 2

U7 Power Driver

Level Convert U 10

U6 Power Driver

Keyboard

Com 2

Power Drivers U9 Rel 1

Filter & Signal Conditioning Filter + 12 V

Filter

Filter Power In

Leds

Power Supply

+5V

5 Power Outputs

Interfacing System I.R. Trans-Receiver

TAXI

Graphic Printer

4 Programmable Power Outputs

Smart Roof Top Display

“Deriv-Box” Com2

RS232

Unibus Network

Key Pad

Input/Output

Short Distance Radio Modem

Com1

I.R. Passenger Detector

GSM Modem Phone

PC or Terminal Mobile Data Terminal

*Data Terminal and GPS are not being supplied by Digitax

GPS Antena

Smart Card Reader/Writer

Dallas ™ Driver Memory Key Magnetic Card Reader/Writer

Radio Modem

The Digitax F1 Taximeter has sev eral communication channels that make possible the communication with the external world. Two independent RS232 serial ports at baud rate from 300 to 38400 and a 4 wire synchro channel plus a special printer driver, allow the interfacing to several devices at the same time. The Commtax 2 included protocol allows remote managing of all the taximeter, magnetic Credit Card reader , chip card and printer functions. The link to a dispatch system or another mobile terminal is accomplished on the RS232 port at any baud rate from 300 to 38400 using a frame structure N, 8, 1: signal level +/- 12 V, using the protocol COMMTAX 2 described in this document.

Base Station

Technical Description Dimensions Width: 17 cm. Height: 4,5 cm. Depth: 2,5 cm. Weight Gr. 350 ca. Displays Fare counter: 6 digits-Red High Luminosity Led Extra counter: 4 digits Red Light-Luminosity Led Lighted Front texts Power Supply From 8.5 to 16 Volts Temperature From -15 to 70 °C. Relative Umidity 95% Mechanical Strenght 3g Distance Unit From 10 cm. to 6553 meters Step 10 cm. Waiting Time Unit From 0.1 sec. to 6553 Step 0.1 sec. Totalizator Mode Static Ram 32 to 128 Kb with nickel cadmium battery 37 + 37 Statistic Memory with full 10.000 trip-data register (128 Kb.) Tariff Structure 63 Smart and fully indipendent Tariffs +8 Night Tariffs +8 Holidays Tariffs +4 Autofare Tariffs +4 Autodistance Tariffs

Tariff Choice Manual Radio Automatic at pre-programmed: Distance(s) Time(s) Date(s) Fare(s) Amount(s) Tariff Program Change Manual by Key Via Radio By Programmer By Chip Card By Infrared Programmer Peripheral Connections Printer Magnetic Card Reader Chip Card Reader/Writer Infrared Passenger Sensor Mobil Data Terminal Modem Cellular Phone Communications Ports Internal COM1 and COM2 RS232 +/- 12 Volts STD 4 Input/Output TTL level Communications Protocols GMSI Mobilstar RomaNet Telecom It. (Upgradable) Operative Firmware Firmware is on Reprogrammable Eprom upgradable by reprogramming it (Not OTP Chip) Transducer Mechanical Hall Effect or Internal adapter for electronic speedometer up to 100.000 I/km Power Outputs 1 Roof Light 25 Watts 4 Programmable power outputs 5 Watts

RECEIPT PRINTER Mod. "DUE"

Printer Set 1 Printer mod. Due 1 Serial RS232 Standard Connection Cable (1.5 mt.)

Main Features Trip receipt Fare Register Credit-card voucher Graphic Capability (Banners, Logos and Bitmaps)

Print-out of:

Hardware ABS/Polycarbonate Panasonic EPL 1801 S2 H 66.27 mm, W 97.14 mm, L 134.16 mm

Printer case: Printer mechanism: Dim. : ON-OFF switch Red led status indicator

General Specifications Printing method : Operating Voltage : Maximum Print Speed : Head Density: Horizontal Dot Pitch: Vertical Dot Pitch: Total Number of Dots: Paper : Memory for Bitmap Storage: Average Bitmap Size:

Direct Termal, Line Dot Printing DC 9 V - 16 V 450 Dot Lines /s 8 Dots /mm 0.125 /mm 0.125 /mm 384 Standard Termal Paper 58 m/m x 40 m/m diameter 32 Kb 3 Kb

Working Conditions Temperature range (operation) Temperature range (storage) : Humidity range (operation) : Humidity range (storage) : Vibration (operation) : Vibration (storage) : :

: 0 ° C to + 50 ° C - 25 ° C to + 70 ° C 10% to 95% without condensation Up to 95% without condensation 0.5 G - 10, 55, Hz/min X, Y, 1H 2.0 G - 10, 55, Hz/min X, Y, 1H MTBF 1 X 10 pulses

Serial Interface Specifications Specifications Stardard RS232 Line Baud Rate: Parity: Data Bits: Stop Bits:

9600 none 8 1

General Printer Commands Two Dimensional Font Scaling Standard Line Printing On Line Device Checking Load Bitmaps into Printer Memory Print Selected Bitmap

Ticket Examples

Magnetic Credit Card Reader

Main Features ISO2 Track 2nd FM 75 BPI

Standard Card: Track used: Recording method: Recording density:

Life and error rate Approx. 300,000 time pass Less than 0.5 %

Life long of head: Reading error:

Working Conditions Temperature range (operation) : Temperature range (storage) : Humidity range (operation) : Humidity range (storage) : Vibration (operation) : Shock durability :

-20 ° C to + 70 ° C - 30 ° C to + 80 ° C 10% to 95% without condensation Up to 95% without condensation Vibration sweep 10 / 50 Hz/mm, X, Y, Z direction 30 G

INFRA-RED PASSENGER SENSOR

Infra - Red Amplifier Interface Amplified Recieved Head Amplified Transmitted Head

Main Features Detection of front seat passenger Switch on the taximeter when passenger on board Detection of rear seat passenger Record of Black trip

Hardware Amplifier Interface Amplified Recieved Head Amplified Transmitted Head Track used: Recording method: Recording density:

Track 2nd FM 75 BPI

Working Conditions Temperature range (operation) : Temperature range (storage) : Humidity range (operation) : Humidity range (storage) : Vibration (operation) : Vibration (storage) :

0 ° C to + 50 ° C - 25 ° C to + 70 ° C 10% to 95% without condensation Up to 95% without condensation 0.5 G - 10, 55, Hz/min X, Y, 1H 2.0 G - 10, 55, Hz/min X, Y, 1H

Interfacing General Specifications

Totalizers The F1 taximeter has a double set of 37 totalizers each also called statistic memories that store in accumulative form several events. The events stored are: • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Quantity of trips Quantity of drops or units Total Km Total Km in For Hire Total Km in Hired Km run with passenger infrared sensor ON and taximeter in For Hire (black trips) Total Km in overspeed Total collected Credit card collect Fare collect Extra charges collect VAT collect (if VAT separate calculation enabled) Time in For Hire Time in Hired Time in Wait (Hired and not moving) Total time Collect in Tariff 1 Collect in Tariff 2 Collect in Tariff 3 Collect in Tariff 4 Collect in Tariff 5 Collect in Tariff 6 Collect in tariffs 7 to 63 Units in Tariff 1 Units in Tariff 2 Units in Tariff 3 Units in Tariff 4 Units in Tariff 5 Units in Tariff 6 Units in Tariff 7 to 63 Km run in tariff 1 Km run in tariff 2 Km run in tariff 3 Km run in tariff 4 Km run in tariff 5 Km run in tariff 6 Km run in tariff 7 to 63

8 ~Hardware & Software~