Table & Field Name Overwrites XML File

Table and Field Name Overwrites XML File For SAP2000®, ETABS®, SAFE® and CSiBridge®

ISO GEN041709M3 Rev. 1 Proudly developed in the United States of America

August 2010

Copyright Copyright  Computers and Structures, Inc., 1978-2013 All rights reserved. The CSI Logo®, SAP2000®, ETABS®, SAFE®, and CSiBridge® are registered trademarks of Computers and Structures, Inc. Watch & LearnTM is a trademark of Computers and Structures, Inc. The computer programs SAP2000®, ETABS®, SAFE®, and CSiBridge® and all associated documentation are proprietary and copyrighted products. Worldwide rights of ownership rest with Computers and Structures, Inc. Unlicensed use of these programs or reproduction of documentation in any form, without prior written authorization from Computers and Structures, Inc., is explicitly prohibited. No part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without the prior explicit written permission of the publisher. Further information and copies of this documentation may be obtained from: Computers and Structures, Inc. www.csiamerica.com [email protected] (for general information) [email protected] (for technical support)

DISCLAIMER CONSIDERABLE TIME, EFFORT AND EXPENSE HAVE GONE INTO THE DEVELOPMENT AND TESTING OF THIS SOFTWARE. HOWEVER, THE USER ACCEPTS AND UNDERSTANDS THAT NO WARRANTY IS EXPRESSED OR IMPLIED BY THE DEVELOPERS OR THE DISTRIBUTORS ON THE ACCURACY OR THE RELIABILITY OF THIS PRODUCT. THIS PRODUCT IS A PRACTICAL AND POWERFUL TOOL FOR STRUCTURAL DESIGN. HOWEVER, THE USER MUST EXPLICITLY UNDERSTAND THE BASIC ASSUMPTIONS OF THE SOFTWARE MODELING, ANALYSIS, AND DESIGN ALGORITHMS AND COMPENSATE FOR THE ASPECTS THAT ARE NOT ADDRESSED. THE INFORMATION PRODUCED BY THE SOFTWARE MUST BE CHECKED BY A QUALIFIED AND EXPERIENCED ENGINEER. THE ENGINEER MUST INDEPENDENTLY VERIFY THE RESULTS AND TAKE PROFESSIONAL RESPONSIBILITY FOR THE INFORMATION THAT IS USED.

Table and Field Name Overwrites XML File 1

General The program maintains both a key and a name for each table and for each field in each table. The table and field keys are predefined by the program and cannot be changed; the program uses the keys internally when working with the tables. The program uses the table and field names for all table export and display actions. By default, each table and field name is the same as its corresponding key. However, the user can change the table and field names using the table and field name overwrites XML file, as described in this documentation. By default, table and field names are revised based on the content of a file named xxxDefaultTableNameFile.xml. When the program launches, it reads the xxxDefaultTableNameFile.xml file. If the xxxDefaultTableNameFile.xml file does not exist (see Note), or if it is empty, the table and field names remain the same as the keys. The Options menu > Database > Set Current Table Name Source command in SAP2000, ETABS, and SAFE or the Orb > Settings > Database Table Utilities and Settings > Set Current Table Name Source command in CSiBridge can be used at any time to specify that table and field names be based on an .xml file other than the xxxDefaultTableNameFile.xml. The command also allows the user to restore the program defaults. Any table name can be specified for a table; however, each table name must be unique compared to all other table names. Similarly, any field name can be specified; however, each field name in a table must be unique. If the program reads non-unique table or field names, it will provide a warning message and set the name back to its default; that is, the program will set the table or field name to be the same as the associated key. The comparison of names for uniqueness is not case sensitive. Note: The default xxxDefaultTableNameFile.xml must be located in the same directory as the program executable file. The "xxx" is Sap, Etabs, Safe, or CSiBridge, depending on the program in use. The following table identifies the .xml file and the executable file for each CSi Program.

Program-Specific XML File Name and Program Executable File Name Program

XML File

SAP2000 ETABS SAFE CSiBridge

SapDefaultTableNameFile.xml EtabsDefaultTableNameFile.xml SafeDefaultTableNameFile.xml CSiBridgeDefautTableNameFile.xml

Program Executable File Sap2000.exe Etabs.exe Safe.exe CSiBridge.exe

The use of the Table and Filed Name Overwrites file is currently available for SAP2000 Version 12 and later, SAFE Version 12 and later, and CSiBridge Version 15 and later. It will become available for ETABS with the next major release of the software.

1

Table and Field Name Overwrites XML File

2

Schema The schema is in the file named xxxDefaultTableNameFile.xsd, which is located in the same directory as the program executable file (see preceding table). Again xxx is Sap, Etabs, Safe, or CSiBridge, depending on the program in use.

3

Description of Simple Elements Assumed Element Description Value* tkey The table key as predefined by the program. N.A. tname The new table name. Same as tkey fkey The field key as predefined by the program. N.A. fname The new field name. N.A. * value assumed by program if the simple element is not included in the complex element

2

Table and Field Name Overwrites XML File

4

Example

Following is an example Table and Field Name Overwrites XML file: This file modifies the Sap2000 Joint Coordinates table name to JCs and modifies the XorR and the Z field names in that table to X and Zee, respectively. It also modifies the name of the JointI field in the Connectivity - Frame table to JtI.

Joint Coordinates JCs XorR X Z Zee Connectivity - Frame JointI JtI

3