SYSTEM 409 SYSTEM 409
P
Tangentialfräsen mit System 409
Tangential milling with system 409
- zum Fräsen von exakten 90° Schultern
- for milling exact 90° shoulders
- Schneidkreisdurchmesser Ds von Ø 32 - Ø 80 mm
- cutting edge diameter Ds from Ø 32 - Ø 80 mm
P1
TECHNISCHE INFORMATIONEN TECHNICAL INFORMATION
P
Tangentialfräsen mit System 409 Das zum Patent angemeldete Tangentialfrässystem 409 von HORN überzeugt durch seine Wendeschneidplatten in rhombischer Form. Schaftfräser (Aufnahme: DIN1835-B) mit Schneidkreisdurchmessern von 32 mm und 40 mm, sowie Aufsteckfräser (Aufnahme: DIN 8030-A) mit Schneidkreisdurchmessern von 40 mm, 50 mm, 63 mm und 80 mm sind mit dem neuen Schneidplattentyp 409 bestückt. Die präzisionsgeschliffenen rhombischen Wendeschneidplatten erzielen höchste Genauigkeiten bei besten Oberflächengüten. Positiver Spanwinkel und positiver Axialwinkel sorgen für weichen Schnitt, die Nebenschneide mit integrierter Schleppfase erzeugt beste Planoberflächen. Eine zusätzliche Freiflächenfase sorgt für einen stabilen Keilwinkel und einen besonders ruhigen Fräsprozess. Die Fräser mit einem Eckenradius von r = 0,8 mm erzielen Schnitttiefen bis ap = 9,3 mm und sind zum Fräsen von 90°-Schultern geeignet. Die Wendeschneidplatten aus der neuen Hartmetallsorte AS4B, einem zähen Grundsubstrat, beschichtet mit TiAlN erzielen hohe Standzeiten sowohl beim Schruppen als auch beim Schlichten. Unterstützt wird dies durch eine effektive Innenkühlung durch den Halter mit KSS-Austritt in Richtung Wirkstelle der Schneiden. Eine über Spanformsimulation entwickelte Schneidengeometrie ermöglicht einen optimalen Spanablauf, zusätzlich angebrachte „Vorsprünge" am Schneidplattenumfang ergeben einen verbesserten Freiwinkel der einzelnen Nebenschneiden und zudem einen zusätzlichen planseitigen Schutz der dadurch zurückversetzten Hauptschneide. Der speziell oberflächenbehandelte Fräsergrundkörper ist mit seiner hohen Härte und Festigkeit langzeitgeschützt gegen den abrasiven Angriff der Späne. In vergütetem 42CrMo4 erzielte ein Tangentialfräser vom Typ 409 mit rhombischen Wendeschneidplatten eine um 60 Prozent höhere Standzeit als vergleichbare Werkzeuge auf dem Markt.
Tangential milling with system 409 The 409 tangential milling system, for which HORN has filed a patent, makes a strong impression with its rhombicshaped indexable inserts. End mills (mounting: DIN 1835-B) with cutting edge diameters of 32 mm and 40 mm, as well as arbour milling cutters (mounting: DIN 8030-A) with cutting edge diameters of 40 mm, 50 mm, 63 mm and 80 mm are equipped with the new cutting insert type 409. The precision-ground rhombic indexable inserts achieve maximum accuracy with the best possible surface qualities. A positive cutting angle and axial angle ensure a soft cut, while the secondary cutting edge with integrated trailing chamfer produces the best face surfaces. An additional free-formed surface chamfer provides a stable wedge angle and a particularly smooth milling process. The milling cutters with a corner radius of r = 0.8 mm achieve cutting depths of up to ap = 9.3 mm and are suitable for milling 90° shoulders. The indexable inserts made from the new carbide grade AS4B, a tough basic substrate, coated with TiAlN achieve long tool lives for both rough machining and finishing. This is supported by effective internal cooling through the holder with cooling lubricant aimed at the active zone of the cutting edges. A cutting edge geometry which has been developed using chip shape simulation enables an optimal chip flow, "additions" attached to the cutting inserts produce an improved relief angle for the individual secondary cutting edges and, furthermore, provide extra protection on the flat side for the main cutting edge which is set back in the process. The specially surface-treated main milling cutter body has long-term protection against chip abrasion thanks to its hardness and strength. In tempered 42CrMo4 , a tangential milling cutter of type 409 with rhombic indexable inserts achieved a 60 percent longer tool life than other comparable tools on the market.
P2
TANGENTIALFRÄSEN TANGENTIAL MILLING
P
M409
FRÄSERSCHAFT Typ MILLING SHANK Type
mit innerer Kühlmittelzufuhr with through coolant supply
Schneidkreis-Ø
32/40 mm
Cutting edge Ø
Schaftmaterial: Stahl (nicht schrumpfbar) Material of shank: Steel (not recommended for shrink fitting)
für Wendeschneidplatte for use with Indexable insert
Typ
409
Type
Abbildung = rechtsschneidend Picture = right hand cutting version
Bestellnummer
Z
Ds
ap
l1
l2
l3
d
d1
M409.032.D32.6.04B
4
32
9,3
111
47
60
32
31
M409.040.D32.6.05B
5
40
9,3
111
-
60
32
39
Part number
Abmessungen in mm
Dimensions in mm
Das Anzugsdrehmoment der Schrauben finden Sie in den Technischen Hinweisen. For torque specifications of the screw, please see Technical Instructions.
Ersatzteile Spare parts
Fräserschaft Spannschraube TORX PLUS®-Schlüssel Milling shank
M409.0...
Screw
030.3511.T10P
TORX PLUS® Wrench
T10PL
P3
TANGENTIALFRÄSEN TANGENTIAL MILLING
P
M409
MESSERKOPF Typ MILLING CUTTER Type
mit innerer Kühlmittelzufuhr with through coolant supply
Schneidkreis-Ø
40/50/63/80 mm
Cutting edge Ø
Aufsteckfräser nach DIN 8030-A Arbor mounted cutter as per DIN 8030-A
für Wendeschneidplatte for use with Indexable insert
Typ
Type
Ausführung als Aufsteckfräser
Abbildung = rechtsschneidend
Type arbor mounted
Picture = right hand cutting version
Bestellnummer
409
Z
Ds
ap
h
h2
dk
d2
d5
M409.0040.A16.05
5
40
9,3
35
34,5
33
16
16,0
M409.0050.A22.07
7
50
9,3
40
39,5
41
22
M409.0063.A22.08
8
63
9,3
40
39,5
49
M409.0080.A27.10
10
80
9,3
50
49,5
59
Part number
b
c
l2
8,4
5,6
22
19,5
10,4
6,3
24
22
19,5
10,4
6,3
25
27
21,5
12,4
7,0
28
Abmessungen in mm
Dimensions in mm
Das Anzugsdrehmoment der Schrauben finden Sie in den Technischen Hinweisen. For torque specifications of the screw, please see Technical Instructions.
Ersatzteile Spare parts
Messerkopf Spannschraube TORX PLUS®-Schlüssel Milling cutter
M409.00...
P4
Screw
030.3511.T10P
TORX PLUS® Wrench
T10PL
TANGENTIALFRÄSEN TANGENTIAL MILLING
WENDESCHNEIDPLATTE Typ INDEXABLE INSERT Type
Schnitttiefe bis
P
409 9,3 mm
Depth of cut up to
für Fräser
for use with Milling tool
Typ
Type
M409
mit 4 nutzbaren Schneidkanten
Bestellnummer
ap
h
rx
R409.093.U.08
9,3
5,2
0,8
Part number
▲ ab Lager / on stock Δ 4 Wochen / 4 weeks ● Haupteinsatzbereich / main recommendation ο bedingt einsetzbar / alternative recommendation ███ unbeschichtete HM-Sorten / uncoated grades ███ beschichtete HM-Sorten / coated grades ███ bestückt/Cermet / brazed/Cermet Abmessungen in mm Dimensions in mm
AS4B
with 4 usable cutting edges
▲
P M K N S H
● ● ● ο ●
HM-Sorten
Carbide grades
P5
SCHNITTDATEN CUTTING DATA
P
Richtwerte für Schnittgeschwindigkeit vc und mittlere Spandicke hm zur Berechnung des Vorschubs mittels Schnittdatenprogamm »HCT«. Standard values for cutting speeds vc and medium thickness hm for calculating feed rates by calculating cutting programm »HCT«.
Härte
Hardness
Brinell (HB)
Werkstoff Material
Schnittgeschwindigkeit
Cutting speed
vc (m/min)
mittlere Spandicke
medium thickness of chip
hm (mm)
AS4B
P
Kohlenstoffstahl Carbon steel
Legierter Stahl
Alloyed steel
0,2% C 0,4% C 0,6% C geglüht
annealed
vergütet
quenched
hochlegierter Stahl
high alloyed steel
(>5%)
Stahlguss
Cast steel
geglüht
annealed
unlegiert unalloyed
legiert
alloyed
M
martensitisch,ferritisch Rostfreier Stahl Stainless steel
martensitic, ferritic
austenitisch
austenitic
K
Grauguss
Grey cast iron
niedrige Festigkeit low tensile strength
hohe Festigkeit
high tensile strength
Kugelgraphitguss
Spheroidal graphite cast iron
Temperguss
Malleable cast iron
ferritisch ferritic
perlitisch
perlitic
ferritisch ferritic
perlitisch
perlitic
N
Al-Legierungen Al-alloys
nicht vergütbar
not heat treatable
vergütbar
heat treatable
Al-Guss-Legierung Al-cast-alloy
nicht vergütbar
not heat treatable
vergütbar
heat treatable
nicht vergütbar Kupfer-Legierungen
Copper-alloys
not heat treatable
vergütbar
heat treatable
S
geglüht Warmfeste Legierung Heat resistant alloy (Fe)
annealed
gehärtet
hardened
geglüht Warmfeste Legierung
Heat resistant alloy (Ni, Co)
annealed
gehärtet
hardened
P6
140 180 200
240 210 160
180
150
280 350
120 70
200
70
180
180
220
120
200
130
0,09
180
120
0,08
180
100
250
90
160
120
250
60
125
100
225
120
0,14
0,1
0,1
0,1
0,16
0,13
0,13
30-80 80-120 80 100 90 100 200
80
275
-
250
40
350
-
0,09
0,09