Swimming Pools waterproofing systems
> POOL 120 System
1
Swimming Pools
POOL120
WATERPROOFING SYSTEMS FOR TILED POOLS Multilayer waterproofing sheet specially designed to ensure 100% water tightness and complete sealing of brand new pools and reformed pools, with no need to remove the old materials such as tiles, vitreous glass mosaic tiles, etc
Less time and less spending Our system allows renovation with no mess since our products are fitted directly over the existing finishing itself. Besides, saving time and over-spending due to the simple installation method, you avoid perforating the receptacle or removing the old tiling to install a replacement pool.
ENJOY YOUR POOL AGAIN Design Our POOL120 system easily transforms your old pool into a new and stylish pool since our waterproof membrane sheet is designed for the refurbishment and redecoration of all types of pools. We guarantee 100% water tightness and the perfect sealing of the pool in order to avoid leaks, pools main problem.
2
Swimming Pools waterproofing systems
POOL120
Pool membranes sheet stick straight together to the old tiles.
Comfort and accessibility Once the empty pool is clean, and after repairing any defects in the inside, it is time to lay our POOL120 sheet which is fully adhered to the old tiling with adhesive cement C2. The sheet membranes are specially designed to avoid the formation of bubbles caused by the steam pressure during the gluing setting process.
POOL120
Our POOL120 membrane sheet is designed to renovate all kind of pools.
Renew your style With POOL120 is truly and effectively easy to change your old pool into a beautiful and stylish new pool. Look at the pictures and admire how fashionable they are!
General Problems Our POOL120 waterproofing system is 100% guaranteed watertight and the perfect sealing of the receptacle in order to prevent and avoid the usual pool problems, mainly leaking.
3
POOL120
WATERPROOFING SYSTEMS FOR TILED POOLS.
Advantages
Advantages
Our system allows renovation with no mess since our products are fitted directly over the existing finishing itself. Besides, saving time and over- spending due to its simple installation method, you avoid perforating the receptacle or removing the old tiling to install a replacement pool.
Our system allows reparation of critical areas or particular spots with no need to remove old materials such as tiles, vitreous glass mosaic tiles, etc
5
refurbishment Waterproofing of a pool 1. New tiling 2. Adhesive cement mortar 3. Pool120 4. Dry50 Band 5. Old tiling
4
Swimming Pools waterproofing systems
POOL120 Installation instructions Direct installation over existing floor; it is not necessary to clear out any debris.
1. Clean the pool receptacle and repair any defects.
Make sure that all the membrane is perfectly attached to the surface and there are no air bubbles, no matter how small, in order to avoid future problems or bulges. Allow the adhesive to dry.
4. Once finished the pool perimeter, proceed with the placing of the new tiling directly over the membrane sheet using C2 adhesive cement mortar.
?
2. Place the POOL120 sheet fully adhered to the old tiling with C2 adhesive cement mortar.
3. After the membrane sheets are tightly inserted, the proper union is made with Band DRY50 13, using SEAL PLUS to adhere it to the membrane sheets.
Due to the thickness of the adhesive, a smooth or straight-edged trowel or spatula, (not toothed), to ensure a covering over the entire surface of the joint.
5. When the whole set is dry enough, it is time to fill up the pool and enjoy it!
If you need additional technical or professional information, check on our webpage www.revestech.com where you can find specific details in relation to all our products, Technical Data Sheets and Installation Guides.
5
POOL 120
0,8 mm
415 g/m2
POOL 120 membrane sheet Description
Reference
Presentation
Waterproofing multilayer membrane sheet for refurbishment of pools.
POOL 120 30
1,5 x 30m (45m ) roll
POOL 120 20
1,5 x 20m (30m2) roll
POOL 120 10
1,5 x 10m (15m2) roll
POOL 120 5
1,5 x 5m (7,5m2) roll
Description
Reference
Presentation
Waterproof reinforcement for angles
DRY50 Cornerin
2 pieces per bag
DRY50 Cornerout
2 pieces per bag
Description
Reference
Presentation
Waterproof reinforcement union strip
DRY50 Banda 13x30
30m x 12,7cm (1 piece) roll
DRY50 Banda 13x5
5m x 12,7cm (1 piece) roll
Description
Reference
Presentation
Special adhesive for joints
SEAL PLUS 6
6 kg can
2
Accessories
Coverage: 1 kg = 9 linear metres overlap. A 6kg tub will cover 45 linear metres.
POOL 120
Features
When joints with REVEStECH ® POOl 120 to different materials such as skimmers, lights, drains of polypropylene and other elements are required, use an adhesive suitable for them from a supplier of building materials. For a perfect adherence to such materials, we recommend an adhesive that is two-component, epoxy or polyurethane.
Joints with lights and inlets
Fill with a bead of two part polyurethane or epoxy adhesive, to fix the membrane to pvc, polypropylene, etc.
Also use Seal Plus adhesive and put a cut sheet set as close as possible to the tube. Fit and seal the joints.
Seal it all with Seal Plus adhesive as shown in the picture.
Sealing around skimmers
Cut the Pool 120 membrane, pasting it and adapting it to the surface.
6
Make joints to plastic with a two-part epoxy or polyurethane adhesive. Apply with a spatula.
Seal it all with Seal Plus adhesive as shown in the picture.
Swimming Pools waterproofing systems
POOL 120
Solving Problems
Losses of level from undetected fissures and cracks
In pools made of reinforced concrete, fissures and cracks are often produced by movements of retraction. To ensure the impermeability of the pool cover with REVESTECH ® POOl 120 waterproof and flexible membrane, which is able to absorb movements from shrinkage and settlement.
Losses of level from detected fissures and cracks
In some pools, localised cracks and fissures as well as areas that have “peeled”, can have a partial repair, without having to do the entire pool. To do this we must remove and sanitise the area peeled off, check that the rest of the surface is sound, then adhere the REVEStECH® pool120 membrane with a two-part epoxy or polyurethane adhesive.
Modifications to the pool
Replacing or changing the hydraulic perimeter installation
7
