SURFACE PREPARATION. Surface Dressings • Surface Grinding • Scabblers • Power Strippers
SURFACE PREPARATION.
TURBO STRIPPER
MULTI STRIPPER LARGE
This heavy duty, self-propelled turbo-stripper is exclusively used for removing bonded floor covering, including tiles and foam backed carpet.
For rapid removal of sheet vinyl, linoleum tiles and build up of excess materials in production areas.
• Weight: 140kg • Blade size: 450mm • Blades available to purchase
• Weight: 45kg • Blade size: 300mm • Blades available to purchase
CODE 1058
1 DAY 2 DAYS 7 DAYS 79.20 105.60 132.00
INFO 110V
ROTARY FLAILED SCABBLER A lightweight scabbler that can be used in conjunction with dust extraction for operator comfort (see Cleaning Section). A 200m wide drum makes work highly productive. The machines can be supplied with a variety of different drum configurations to allow them to be used for any of the following. – Cleaning of concrete surfaces – Roughening surfaces before re-applying paint – Removal of paint, rust, oil, grease and rubber – Removal of ice build ups – Removal of road markings – De-chipping flat roofs – Anti-slip cattle grooving – General anti-slip applications • Weight: 52kg • Flail wear charges extra
CODE 1067
148
1 DAY 2 DAYS 7 DAYS 204.63 272.84 341.05
INFO 110V
CODE 1011 1012
1 DAY 2 DAYS 7 DAYS 124.80 166.40 208.00 124.80 166.40 208.00
Find your nearest Branch: 0870 514 3391
INFO PETROL 32 AMP 110V
3 PHASE DUST CONTROL UNIT
This mobile vacuum is equipped with two cyclones, one of which is used as a pre-separator to take out 80 – 90% of the coarse material; the other (equipped with polyester and HEPA filters) takes care of the remaining fine dust giving 99.97% separation.
This large dust extraction unit is ideally suited to larger, heavier grinding applications.
SURFACE PREPARATION.
DC3800 HEAVY DUTY TWIN DUST EXTRACTION VACUUM
• Weight: 180kg • 5kw
• H1,375 x W650 x L700mm • Weight: 50kg • Collection bags extra
CODE 2369
1 DAY 2 DAYS 7 DAYS 121.35 161.80 202.25
INFO 110V
CODE 2308
1 DAY 2 DAYS 7 DAYS 233.70 311.60 389.50
or visit our website at www.brandonhire.co.uk
INFO 3 PHASE
149
SURFACE PREPARATION.
COMPACT FLOOR GRINDER This machine uses a direct drive motor coupled to a diamond grinding head with a working width of 230mm. – Suitable for small areas and confined spaces – Grinding concrete and screeds – Removing adhesives and residues – Clean off paints and coatings – Levelling, grinding and smoothing
FLOOR GRINDER A diamond floor grinder suitable for larger areas and continuous grinding of concrete, screed, epoxy and latex floors. – Smoothing trowel marks – Resurfacing old concrete and slabs – Renovation and maintenance of factory floors • Weight: 65kg • Power: 2.2kw/32 amp • Diamond wear charged as extra
• Weight: 42kg • Power: 1.5kw • Diamond wear charged as extra
CODE 100N
1 DAY 2 DAYS 7 DAYS 128.01 170.68 213.35
INFO 110V
FLOOR PREPARATION SYSTEM An effective means of floor preparation that can be connected to our heavy duty vacuums to provide a dust free system of work. A wide range of applications can be dealt with by a variety of tungsten and silicon carbide attachments. • Weight: 61kg • Grinding attachments available to purchase • 32 amp
CODE 1 DAY 2 DAYS 7 DAYS 100W 90.48 120.64 150.80
INFO 110V
CODE 2332 2356
1 DAY 116.88 19.77
2 DAYS 7 DAYS INFO 155.84 194.80 FLOOR PREPARATION MACHINE 26.36 32.95 DUST CONTROL SKIRT
WHEN USING FLAILED SCABBLERS AND FLOOR GRINDERS IN CONJUNCTION WITH DUST EXTRACTION VACUUMS, OUR PRE-SEPARATOR CYCLONE ON PAGE 37 WILL IMPROVE THE PERFORMANCE AND INCREASE PRODUCTIVITY OF BOTH. CALL THE SAFETY ADVICE LINE ON 0117 977 8919 FOR ADVICE.
150
Find your nearest Branch: 0870 514 3391
SURFACE PREPARATION.
DIAMOND POLISHER
SURFACE BLASTER
A wet polisher for smoothing, polishing and finishing stone, marble, granite and terrazzo. • Weight: 3.9kg • Diamond pads extra • Size: 100mm
A multi-purpose surface cleaning system designed for: – Floor stripping after carpet removal – Removes glue and backing adhesive – Exterior wall renovation and masonry – Strips elastomeric and rubberised paints – Bitumens and waterproofers – Preps structural steel and tanks – Keys for anti-corrosion coatings – Rubber mounted tungsten points • Weight: 2.9kg • Flail wear charges apply
CODE 0289
1 DAY 2 DAYS 7 DAYS 35.67 47.56 59.45
INFO 110V
CONCRETE PLANER A concrete planer with dry grinding diamond wheel for use on concrete, masonry and natural stone. • Diamond wear charged as extra • Size: 110mm
CODE 1 DAY 2 DAYS 7 DAYS 1148 50.97 67.96 84.95
INFO 110V
CODE 1044
1 DAY 2 DAYS 7 DAYS 62.07 82.76 103.45
INFO 110V
or visit our website at www.brandonhire.co.uk
151
SURFACE PREPARATION.
POWER STRIPPER This powerful hand-held rotary stripper is ideal for: – Stripping of paint and textured coatings – Cleaning brickwork and masonry – Removing graffiti and dirt • Weight: 4.8kg • Attachment charged as extra
CODE 1 DAY 2 DAYS 7 DAYS 0293 35.58 47.44 59.30
152
INFO 110V
ROTARY SCABBLER A lightweight hand-held machine capable of stripping, scabbling or keying. • Weight: 3.8kg • Attachments charged as extra
CODE 1 DAY 2 DAYS 7 DAYS INFO 0262 33.84 45.12 56.40 110V 0287 9.06 12.08 15.10 DUST HOOD
AIR GRIT BLASTER Whether it’s stone, brickwork, metal or timber, this dry grit blaster will clean fast and efficiently. Requires 120cfm air compressor, the blaster comes complete with a full safety kit. • Supplied with breathing hood • Replaceable visors on sale or return • Grit for sale
CODE 1 DAY 2 DAYS 7 DAYS INFO 1524 141.57 188.76 235.95 PNEUMATIC
Find your nearest Branch: 0870 514 3391
NEEDLE SCALER LOW VIBRATION
This machine will clean old brick, stone and reclaimed building materials using contact activated chisel hammers. The points chip away old mortar in a similar action to using a hammer and chisel.
A thorough and effective tool for removing coatings, corrosion and other accumulated materials from irregular surfaces.
• Power: 1.1kw • Weight: 65kg
CODE 1061
SURFACE PREPARATION.
BRICK RECLAIMER
• Weight: 3.5kg • Air consumption: 5.5cfm
1 DAY 2 DAYS 7 DAYS 138.02 184.03 230.05
INFO 110V
CODE 1558
1 DAY 2 DAYS 7 DAYS 38.28 51.04 63.80
or visit our website at www.brandonhire.co.uk
INFO AIR
153
SURFACE PREPARATION.
SINGLE HEAD AIR SCABBLER
TRIPLE HEAD AIR SCABBLER
Scabbling hammers are used in more demanding applications for surface preparations and coating removal.
A heavy-duty scabbler for ‘fracturing’ thicker, tougher materials during surface preparation.
• Weight: 2.7kg • Air consumption: 10.5cfm
• Weight: 5.3kg • Air consumption: 16cfm
CODE 1560
1 DAY 2 DAYS 7 DAYS 49.23 65.64 82.05
INFO LOW VIBRATION
AIR POLE SCABBLER Ideal for deep concrete dressing and awkward to get at areas. • Weight: 19.3kg • Air consumption: 25cfm
CODE 1559
154
1 DAY 2 DAYS 7 DAYS 35.58 47.44 59.30
INFO LOW VIBRATION
CODE 1561
1 DAY 86.10
2 DAYS 7 DAYS 114.80 143.50
Find your nearest Branch: 0870 514 3391
INFO LOW VIBRATION
