17612_Sticks_P1_10
7/20/05
2:13 PM
Page 1
Sticks & Stones Unlimited, Inc. w w w. s t i c k s a n d s t o n e s u n l . c o m General Catalog
Distributed By:
17612_Sticks_P1_10
7/20/05
2:13 PM
Page 2
Table of Contents Item
Page
Aluminum Oxide Bench Stones Combination – Coarse/Fine – Oil Filled ..................................................................................................... 4 Single Grit – Oil Filled ................................................................................................................................ 4 Silicon Carbide Bench Stones Combination – Coarse/Fine – Oil Filled ..................................................................................................... 5 Single Grit – Oil Filled ................................................................................................................................ 5 Specialty “Economy” Norton Bench Stones ............................................................................................... 5 Boron Carbide Dressing Sticks .................................................................................................................... 5 Tool Room And Die Finishing Stones Square – Aluminum Oxide & Silicon Carbide – Oil Filled .......................................................................... 6 Triangular – Aluminum Oxide & Silicon Carbide – Oil Filled ..................................................................... 7 Round – Aluminum Oxide & Silicon Carbide – Oil Filled ........................................................................... 8 Half Round – Aluminum Oxide & Silicon Carbide – Oil Filled ................................................................... 9 Silversmiths’ Stones Aluminum Oxide ....................................................................................................................................... 10 Specialty Shapes – Aluminum Oxide ....................................................................................................... 10 Round Edge Slip Stones ............................................................................................................................. 11 Arkansas Round Edge Slip Stones ............................................................................................................ 11 Hard Arkansas Carving Tools ...................................................................................................................... 11 Hard Arkansas Jewelers Stone & Penknife Pieces ....................................................................................11 Aluminum Oxide Engravers Pencils ............................................................................................................12 Engravers Chuck and Points ........................................................................................................................12 Arkansas Bench Stones – Hard & Soft .......................................................................................................12 Mounted Arkansas Bench Stones In Box – Hard & Soft ...........................................................................12 Arkansas Square And Triangle Files ...........................................................................................................12 Special Shaped Arkansas Files – Hard Only ..............................................................................................13 Jointer Stones ...............................................................................................................................................13 Pocket Stone With Plastic Pouch .................................................................................................................13 Molded Boat Rubs .........................................................................................................................................14 Gouge Sharpening Stone .............................................................................................................................14 Carving Slips....................................................................................................................................................14 Silicon Carbide Hand Hones ........................................................................................................................14 General Purpose File ....................................................................................................................................14 Utility Files .....................................................................................................................................................14 Carving Knife Sharpener ..............................................................................................................................15 Kitchen Knife Sharpener ..............................................................................................................................15 Home and Garden Sharpener .......................................................................................................................15 Combination Axe Stone ................................................................................................................................15 Machine Knife Stone .....................................................................................................................................15 Scythe Stones ................................................................................................................................................15 Tradesmen’s Stones ......................................................................................................................................15 Wheel Dresser ...............................................................................................................................................16 Dressing Sticks ..............................................................................................................................................16 Cutlery Bench Stones ...................................................................................................................................16 Crystolon Cutlers Stone ...............................................................................................................................16 Reversible Oil Stone in Beautiful Hinged Wood Box with Latch ..............................................................16 Wood Boxes Only ..........................................................................................................................................16 S&S Burr Breaker ..........................................................................................................................................17 Blanchard “Burr Busters” .............................................................................................................................17 Aluminum Oxide/Soft Arkansas Combo .....................................................................................................17 Norton Multi-Oilstone Units ..........................................................................................................................17 Griddle Bricks ................................................................................................................................................18 Rubbing Brick with Handle ...........................................................................................................................18 Rubbing Bricks – Plain & Fluted ..................................................................................................................18 Half Round Foundry Core Files ...................................................................................................................18
2
17612_Sticks_P1_10
7/20/05
2:13 PM
Page 3
Table of Contents (cont.) Item
Page
Flat Core Files with Plastic Handles ...........................................................................................................19 Fiberglass Reinforced – S/C Resin Bond ...................................................................................................19 Dressing Sticks ..............................................................................................................................................19 Mold & Diemakers Polishing Stones ...........................................................................................................20 Pencil Stones .................................................................................................................................................20 Diemaker Stones ...........................................................................................................................................20 Moldmaker Stones ........................................................................................................................................21 Hard Moldmakers Stones .............................................................................................................................21 EDM Stones ...................................................................................................................................................21 Superfine Stones ...........................................................................................................................................21 Resin Bonded Stones ...................................................................................................................................22 General Polishing Stones .............................................................................................................................22 Hard Polishing Stones ..................................................................................................................................22 Ruby Stones ...................................................................................................................................................22 Metal Polishing & Cleaning ..........................................................................................................................23 Rubber Bond Sticks ......................................................................................................................................23 Cotton Fiber Reinforced Resin Sticks .........................................................................................................23 MD-1 Mandrel Driver .....................................................................................................................................24 Superior – Tennessee Two Stone Hone .......................................................................................................26 Sunnen-Superior – Tennessee Hone ...........................................................................................................27 Norton Diamond Hand Hones ......................................................................................................................28 Portable Hone Kit ..........................................................................................................................................29 ASI General Purpose Shop Hones ..............................................................................................................29 BCD-Hone Kit .................................................................................................................................................29 Portable Honing Devices S&S-Mini ...................................................................................................................................................30 S&S-Junior ................................................................................................................................................30 S&S-Middle ...............................................................................................................................................30 Model S&S-Jumbo ....................................................................................................................................31 Model S&S-Maxi-Jumbo ...........................................................................................................................31 Hand Feed Portable Hone ASI-218 .....................................................................................................................................................32 Aligner™ Guided Sharpening Kits ..............................................................................................................34 Diamond Whetstones™ - Bench Models .....................................................................................................34 Pocket Models ................................................................................................................................................34 Diafold™ Diamond Whetstone™ ..................................................................................................................34 Diafold™ Sharpeners & Diafold™ Folding Files ........................................................................................34 Diamond Mini-Sharp™ Sharpener ...............................................................................................................34 General Purpose Diamond Dressing Tools .................................................................................................35 Single Point Tools ..........................................................................................................................................35 Flex-Hone® Tool ..............................................................................................................................................36 S&S Finishing Stick ......................................................................................................................................38 Norton Pacesetter Mounted Points A Shapes ..................................................................................................................................................39 B Shapes ..................................................................................................................................................40 B Shapes (continued) ...............................................................................................................................41 W Shapes .................................................................................................................................................42 W Shapes (continued) ..............................................................................................................................43 Terms and Conditions ...................................................................................................................................44
3
17612_Sticks_P1_10
8/3/05
Min. Pkg. Std. Pkg.
12:50 PM
Page 4
Aluminum Oxide Bench Stones
1 5
Combination – Coarse/Fine – Oil Filled UPC Code # 730006
Sticks & Stones #
Norton #
Carbo #
Bay State #
Stone Size & Shape
00004 00005 00003 00001 00002
AB-64 AB-134 AB-45 AB-6 AB-8
IB-64 IB-134 IB-45 IB-6 IB-8
N.A. #144 N.A. #433 #431
A80-CFO A75-CFO A76-CFO A77-CFO A79-CFO
4" DIA. x 1" THICK 4 x 1-3/4 x 5/8 5 x 2 x 3/4 6x2x1 8x2x1
Min. Pkg. Std. Pkg.
1 5
F = Fine
M = Medium
Approx. Weight Per Std. Pkg. 7 3 4 7 8
lbs. lbs. lbs. lbs. lbs.
C = Coarse
Single Grit – Oil Filled UPC Code # 730006
Sticks & Stones #
Norton #
Carbo #
Bay State #
Stone Size & Shape
00078 00145 00009 00079 00146 00010 00080 00147 00076 00143 00007 00077 00144 00008
AFB-14 AMB-14 ACB-14 AFB-24 AMB-24 ACB-24 AFB-35 AMB-35 AFB-6 AMB-6 ACB-6 AFB-8 AMB-8 ACB-8
FB-14 MB-14 CB-14 FB-24 MB-24 CB-24 FB-35 MB-35 FB-6 MB-6 CB-6 FB-8 MB-8 CB-8
N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A.
A60-FO A60-MO A60-CO A61-FO A61-MO A61-CO A63-FO A63-MO A66-FO A66-MO A66-CO A69-FO A69-MO A69-CO
4 x 1 x 1/4 4 x 1 x 1/4 4 x 1 x 1/4 4 x 1 x 1/2 4 x 1 x 1/2 4 x 1 x 1/2 5 x 2 x 5/8 5 x 2 x 5/8 6x2x1 6x2x1 6x2x1 8x2x1 8x2x1 8x2x1
Approx. Weight Per Std. Pkg. 1 1 1 2 2 2 4 4 7 7 7 8 8 8
lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs.
We Offer “Norton” Bear Brand sharpening oil Bear Oil is a highly refined sharpening stone oil which meets U.S. Pharmacopia standards of purity for mineral oils.
4
UPC Code # 730006
Sticks & Stones #
Norton #
Carbo #
Bay State #
Size
Approx. Weight Per Std. Pkg.
00484 00486 00485
XB-1 XB-5 XB-2
XB-1 XB-5 XB-2
N.A. N.A. N.A.
N.A. N.A. N.A.
4-1/2 oz. Can 1 Pint Can 1 Quart Can
8 lbs. 20 lbs. 20 lbs.
17612_Sticks_P1_10
7/20/05
Min. Pkg. Std. Pkg.
2:13 PM
Page 5
Silicon Carbide Bench Stones
1 5
Combination – Coarse/Fine – Oil Filled UPC Code # 730006
Sticks & Stones #
Norton #
Carbo #
Bay State #
Stone Size & Shape
00450 00453 00449 00446 00448
SB-64 SB-134 SB-45 SB-6 SB-8
JB-64 JB-134 JB-45 JB-6 JB-8
#107 #112 #111 #109 #108
C80-CF C75-CF C76-CF C77-CF C79-CF
4" DIA. x 1" THICK 4 x 1-3/4 x 5/8 5 x 2 x 3/4 6x2x1 8x2x1
Min. Pkg. Std. Pkg.
1 5
F = Fine
M = Medium
Approx. Weight Per Std. Pkg. 7 3 4 7 8
lbs. lbs. lbs. lbs. lbs.
C = Coarse
Single Grit – Oil Filled UPC Code # 730006
Sticks & Stones #
Norton #
Carbo #
Bay State #
Stone Size & Shape
00265 00380 00217 00266 00381 00218 00267 00382 00263 00378 00215 00264 00379 00216 00268 00383 00219
FSB-14 MSB-14 CSB-14 FSB-24 MSB-24 CSB-24 FSB-35 MSB-35 FSB-6 MSB-6 CSB-6 FSB-8 MSB-8 CSB-8 FSB-48 MSB-48 CSB-48
FJB-14 MJB-14 CJB-14 FJB-24 MJB-24 CJB-24 FJB-35 MJB-35 FJB-6 MJB-6 CJB-6 FJB-8 MJB-8 CJB-8 N.A. N.A. N.A.
#145 #146 #147 #292F #292M #292C #124 #125 #121 #122 #123 N.A. N.A. N.A. #118 #119 #120
C60-F C60-M C60-C C61-F C61-M C61-C C63-F C63-M C66-F C66-M C66-C C69-F C69-M C69-C N.A. N.A. N.A.
4 x 1 x 1/4 4 x 1 x 1/4 4 x 1 x 1/4 4 x 1 x 1/2 4 x 1 x 1/2 4 x 1 x 1/2 5 x 2 x 5/8 5 x 2 x 5/8 6x2x1 6x2x1 6x2x1 8x2x1 8x2x1 8x2x1 8 x 2 x 3/4 8 x 2 x 3/4 8 x 2 x 3/4
Approx. Weight Per Std. Pkg. 1 1 1 2 2 2 4 4 7 7 7 8 8 8 5 5 5
lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs.
Special “Economy” Norton Bench Stones 00483
UPB-8
Quick Cut Stone
8 x 2 x 3/4
Std. Pk. 10
20 lbs.
Boron Carbide Dressing Sticks For tool room applications – Custom sizes also available
UPC Code # 730006
Sticks & Stones #
Norton #
Boride Pdts. #
ESK #
Stone Size & Shape
00538
B-1
Norbide Stick
Boride Stick
Tetrabor Stick
3/16 x 1/2 x 3
5
17612_Sticks_P1_10
7/20/05
Bkn. Pkg. Min. Pkg. Std. Pkg.
= = =
2:13 PM
1-4 5 20
Page 6
Tool Room And Die Finishing Stones F = Fine
M = Medium
C = Coarse
Square – Aluminum Oxide & Silicon Carbide – Oil Filled
6
UPC Code # 730006
Sticks & Stones #
Norton #
Carbo #
Bay State #
Stone Size & Shape
Approx. Weight Per Std. Pkg.
00269 00384 00485 00081 00148 00011 00272 00387 00223 00084 00151 00014 00274 00389 00225 00086 00153 00016 00271 00386 00222 00083 00150 00013 00273 00388 00224 00275 00390 00226 00087 00154 00017 00276 00391 00227 00088 00155 00018 00277 00392 00228 00089 00156 00019 00278 00393 00229 00090 00157 00020
FSF-14 MSF-14 CSF-14 AFF-14 AMF-14 ACF-14 FSF-34 MSF-34 CSF-34 AFF-34 AMF-34 ACF-34 FSF-44 MSF-44 CSF-44 AFF-44 AMF-44 ACF-44 FSF-26 MSF-26 CSF-26 AFF-26 AMF-26 ACF-26 FSF-36 MSF-36 CSF-36 FSF-46 MSF-46 CSF-46 AFF-46 AMF-46 ACF-46 FSF-56 MSF-56 CSF-56 AFF-56 AMF-56 ACF-56 FSF-66 MSF-66 CSF-66 AFF-66 AMF-66 ACF-66 FSF-76 MSF-76 CSF-76 AFF-76 AMF-76 ACF-76
FJF-14 MJF-14 N.A. FF-14 MF-14 N.A. FJF-34 MJF-34 N.A. FF-34 MF-34 N.A. FJF-44 MJF-44 N.A. FF-44 MF-44 N.A.
F-1 M-1 C-1 F-2 M-2 C-2 F-5 M-5 C-5 F-6 M-6 C-6 F-7 M-7 C-7 F-8 M-8 C-8 N.A. N.A. N.A. N.A. N.A. N.A. F-33 M-33 C-33 F-35 M-35 C-35 F-36 M-36 C-36 F-37 M-37 C-37 F-38 M-38 C-38 F-39 M-39 C-39 F-40 M-40 C-40 F-41 M-41 C-41 F-42 M-42 C-42
C1-F C1-M C1-C A1-FO A1-MO A1-CO C3-F C3-M C3-C A3-FO A3-MO A3-CO C5-F C5-M C5-C A5-FO A5-MO A5-CO C2-F C2-M C2-C A2-FO A2-MO A2-CO C4-F C4-M C4-C C6-F C6-M C6-C A6-FO A6-MO A6-CO C8-F C8-M C8-C A8-FO A8-MO A8-CO C9-F C9-M C9-C A9-FO A9-MO A9-CO C10-F C10-M C10-C A10-FO A10-MO A10-CO
4 x 1/4 SQ. SILICON CARBIDE 4 x 1/4 SQ. ALUMINUM OXIDE 4 x 3/8 SQ. SILICON CARBIDE 4 x 3/8 SQ. ALUMINUM OXIDE 4 x 1/2 SQ. SILICON CARBIDE 4 X 1/2 SQ. ALUMINUM OXIDE 6 X 1/4 SQ. SILICON CARBIDE 6 X 1/4 SQ. ALUMINUM OXIDE 6 X 3/8 SQ. SILICON CARBIDE 6 X 1/2 SQ. SILICON CARBIDE 6 X 1/2 SQ. ALUMINUM OXIDE 6 X 5/8 SQ. SILICON CARBIDE 6 X 5/8 SQ. ALUMINUM OXIDE 6 X 3/4 SQ. SILICON CARBIDE 6 X 3/4 SQ. ALUMINUM OXIDE 6 X 1 SQ. SILICON CARBIDE 6 X 1 SQ. ALUMINUM OXIDE
8 oz. 8 oz. 8 oz. 8 oz. 8 oz. 8 oz. 1-1/4 lbs. 1-1/4 lbs. 1-1/4 lbs. 1-1/4 lbs. 1-1/4 lbs. 1-1/4 lbs. 2-1/8 lbs. 2-1/8 lbs. 2-1/8 lbs. 2-1/8 lbs. 2-1/8 lbs. 2-1/8 lbs. 12 oz. 12 oz. 12 oz. 12 oz. 12 oz. 12 oz. 1-3/4 lbs. 1-3/4 lbs. 1-3/4 lbs. 3 lbs. 3 lbs. 3 lbs. 3 lbs. 3 lbs. 3 lbs. 4-5/8 lbs. 4-5/8 lbs. 4-5/8 lbs. 4-5/8 lbs. 4-5/8 lbs. 4-5/8 lbs. 6-1/4 lbs. 6-1/4 lbs. 6-1/4 lbs. 6-1/4 lbs. 6-1/4 lbs. 6-1/4 lbs. 11-1/2 lbs. 11-1/2 lbs. 11-1/2 lbs. 11-1/2 lbs. 11-1/2 lbs. 11-1/2 lbs.
N.A.
N.A.
N.A.
N.A. FF-46 MF-46 CF-46 N.A. FF-56 MF-56 CF-56 N.A. FF-66 MF-66 CF-66 N.A. FF-76 MF-76 CF-76
17612_Sticks_P1_10
7/20/05
Bkn. Pkg. = Min. Pkg. = Std. Pkg. =
2:13 PM
1-4 5 20
Page 7
Tool Room And Die Finishing Stones F = Fine
M = Medium
C = Coarse
Triangular – Aluminum Oxide & Silicon Carbide – Oil Filled UPC Code # 730006
Sticks & Stones #
Norton #
Carbo #
Bay State #
Size & Type Abrasive
Weight Per Std. Pkg.
00279 00394 00091 00158 00021 00281 00395 00092 00160 00022 00283 00396 00233 00094 00162 00024 00282 03012 00232 00093 00161 00023 00095 00163 00025 00096 00164 00026 00097 00165 00027 00098 00166 00028
FSF-114 MSF-114 AFF-114 AMF-114 ACF-114 FSF-134 MFS-134 AFF-134 AMF-134 ACF-134 FSF-144 MSF-144 CSF-144 AFF-144 AMF-144 ACF-144 FSF-136 MSF-136 CSF-136 AFF-136 AMF-136 ACF-136 AFF-146 AMF-146 ACF-146 AFF-156 AMF-156 ACF-156 AFF-166 AMF-166 ACF-166 AFF-176 AMF-176 ACF-176
FJF-114 MJF-114 FF-114 MF-114 N.A. FJF-134 MJF-134 FF-134 MF-134 N.A. FJF-144 MJF-144 N.A. FF-144 MF-144 CF-144
F-9 M-9 F-10 M-10 C-10 F-13 M-13 F-14 M-14 C-14 F-15 M-15 C-15 F-16 M-16 C-16 F-43 M-43 C-43 F-44 M-44 C-44 F-46 M-46 C-46 F-48 M-48 C-48 F-50 M-50 C-50 F-52 M-52 C-52
C15-F C15-M A15-FO A15-MO A15-CO C16-F C16-M A16-FO A16-MO A16-CO C17-F C17-M C17-C A17-FO A17-MO A17-CO C14-F C14-M C14-C A14-FO A14-MO A14-CO A18-FO A18-MO A18-CO A19-FO A19-MO A19-CO A20-FO A20-MO A20-CO A22-FO A21-MO A21-CO
4 x 1/4 TRI. SILICON CARBIDE 4 x 1/4 TRI. ALUMINUM OXIDE 4 x 3/8 TRI. SILICON CARBIDE 4 x 3/8 TRI. ALUMINUM OXIDE 4 x 1/2 TRI. SILICON CARBIDE 4 x 0 1/2 TRI. ALUMINUM OXIDE 6 x 3/8 TRI. SILICON CARBIDE 6 x 3/8 TRI. ALUMINUM OXIDE 6 x 1/2 TRI. ALUMINUM OXIDE 6 x 5/8 TRI. ALUMINUM OXIDE 6 x 3/4 TRI. ALUMINUM OXIDE 6 X 1 TRI. ALUMINUM OXIDE
5 oz. 5 oz. 5 oz. 5 oz. 5 oz. 10 oz. 10 oz. 10 oz. 10 oz. 10 oz. 1 lb. 1 lb. 1 lb. 1 lb. 1 lb. 1 lb. 1-1/4 lbs. 1-1/4 lbs. 1-1/4 lbs. 1-1/4 lbs. 1-1/4 lbs. 1-1/4 lbs. 1-1/2 lbs. 1-1/2 lbs. 1-1/2 lbs. 2-1/8 lbs. 2-1/8 lbs. 2-1/8 lbs. 2-3/4 lbs. 2-3/4 lbs. 2-3/4 lbs. 5-3/.4 lbs. 5-3/4 lbs. 5-3/4 lbs.
N.A.
N.A. FF-146 MF-146 CF-146 FF-156 MF-156 CF-156 FF-166 MF-166 CF-166 FF-176 MF-176 CF-176
7
17612_Sticks_P1_10
7/20/05
Bkn. Pkg. = Min. Pkg. = Std. Pkg. =
2:13 PM
1-4 5 20
Page 8
Tool Room And Die Finishing Stones F = Fine
M = Medium
C = Coarse
Round – Aluminum Oxide & Silicon Carbide – Oil Filled
8
UPC Code # 730006
Sticks & Stones #
Norton #
Carbo #
Bay State #
Size & Type Abrasive
Weight Per Std. Pkg.
00287 00399 00238 00099 00167 00029 00288 00401 00240 00100 00168 00030 00290 00403 00242 00102 00170 00032 00101 00169 00031 00291 00404 00243 00103 00171 00033 00104 00172 00034 00105 00173 00035 00106 00174 00036
FSF-214 MSF-214 CSF-214 AFF-214 AMF-214 ACF-214 FSF-234 MSF-234 CSF-234 AFF-234 AMF-234 ACF-234 FSF-244 MSF-244 CSF-244 AFF-244 AMF-244 ACF-244 AFF-236 AMF-236 ACF-236 FSF-246 MSF-246 CSF-246 AFF-246 AMF-246 ACF-246 AFF-256 AMF-256 ACF-256 AFF-266 AMF-266 ACF-266 AFF-276 AMF-276 ACF-276
FJF-214 MJF-214 N.A. FF-214 MF-214 CF-214 FJF-234 MJF-234 N.A. FF-234 MF-234 CF-234 FJF-244 MJF-244 CJF-244 FF-244 MF-244 CF-244
F25 M25 C25 F26 M26 C26 F29 M29 C29 F30 M30 C30 F31 M31 C31 F32 M32 C32 F64 M64 C64 F65 M65 C65 F66 M66 C66 F68 M68 C68 F70 M70 C70 F72 M72 C72
C25-F C25-M C25-C A25-FO A25-MO A25-CO C26-F C26-M C26-C A26-FO A26-MO A26-CO C27-F C27-M C27-C A27-FO A27-MO A27-CO A28-FO A28-MO A28-CO C29-F C29-M C29-C A29-FO A29-MO A29-CO A30-FO A30-MO A30-CO A31-FO A31-MO A31-CO A32-FFO A32-MO A32-CO
4 x 1/4 RD. SILICON CARBIDE 4 x 1/4 RD. ALUMINUM OXIDE 4 x 3/8 RD. SILICON CARBIDE 4 x 3/8 RD. ALUMINUM OXIDE 4 x 1/2 RD. SILICON CARBIDE 4 x 1/2 RD. ALUMINUM OXIDE 6 x 3/8 RD. ALUMINUM OXIDE 6 x 1/2 RD. SILICON CARBIDE 6 x 1/2 RD. ALUMINUM OXIDE 6 x 5/8 RD. ALUMINUM OXIDE 6 x 3/4 RD. ALUMMINUM OXIDE 6 x 1 RD. ALUMINUM OXIDE
8 oz. 8 oz. 8 oz. 8 oz. 8 oz. 8 oz. 13 oz. 13 oz. 13 oz. 13 oz. 13 oz. 13 oz. 1-5/8 lbs. 1-5/8 lbs. 1-5/8 lbs. 1-5/8 lbs. 1-5/8 lbs. 1-5/8 lbs. 1-3/4 lbs. 1-3/4 lbs. 1-3/4 lbs. 2-3/8 lbs. 2-3/8 lbs. 2-3/8 lbs. 2-3/8 lbs. 2-3/8 lbs. 3-5/8 lbs. 3-5/8 lbs. 3-5/8 lbs. 3-5/8 lbs. 4-7/8 lbs. 4-7/8 lbs. 4-7/8 lbs. 9-1/4 lbs. 9-1/4 lbs. 9-1/4 lbs.
N.A.
N.A. FF-246 MF-246 CF-246 FF-256 MF-256 CF-256 FF-266 MF-266 CF-266 FF-276 MF-276 CF-276
17612_Sticks_P1_10
7/20/05
Bkn. Pkg. = Min. Pkg. = Std. Pkg. =
2:13 PM
1-4 5 20
Page 9
Tool Room And Die Finishing Stones F = Fine
M = Medium
C = Coarse
Half Round – Aluminum Oxide & Silicon Carbide – Oil Filled UPC Code # 730006
Sticks & Stones #
00295 00408 00247 00107 00175 00037 00296 00410 00249 00109 00177 00039 00298 00412 00251 00111 00178 00041 00110 03011 00040 00299 00413 00252 00112 00179 00042 00113 00180 00043 00114 00181 00044 00301 00416 00255 00115 00182 00045
FSF-314 MSF-314 CSF-314 AFF-314 AMF-314 ACF-314 FSF-334 MSF-334 CSF-334 AFF-334 AMF-334 ACF-334 FSF-344 MSF-344 CSF-344 AFF-344 AMF-344 ACF-334 AFF-336 AMF-336 ACF-336 FSF-346 MSF-346 CSF-346 AFF-346 AMF-346 ACF-346 AFF-356 AMF-356 ACF-356 AFF-366 AMF-366 ACF-366 FSF-376 MSF-376 CSF-376 AFF-376 AMF-376 ACF-376
Norton # N .A. FF-314 MF-314 CF-314 N.A. FF-334 MF-334 CF-334 N.A. FF-344 MF-344 CF-344 FF-336 MF-336 CF-336 N.A. FF-346 MF-346 CF-346 FF-336 MF-356 CF-356 FF-366 MF-366 CF-366 N.A. FF-376 MF-376 CF-376
Carbo #
Bay State #
Size & Type Abrasive
Weight Per Std. Pkg.
F17 M17 C17 F18 M18 C18 F21 M21 C21 F22 M22 C22 F23 M23 C23 F24 M24 C24 C54 M54 C54 F55 M55 C55 F56 M56 C56 F38 M58 C58 F60 M60 C60 F61 M61 C61 F62 M62 C62
C35-F C35-M C35-C A35-FO A35-MO A35-CO C36-F C36-M C36-C A36-FO A36-MO A36-CO C37-F C37-M C37-C A37-FO A37-MO A37-CO A38-FO A38-MO A38-CO C39-F C39-M C39-C A39-FO A39-M0 A39-CO A40-FO A40-MO A40-CO A41-FO A41-MO A41-CO C42-F C42-M C42-C A42-FO A42-MO A42-CO
4 x 1/4 H.R. SILICON CARBIDE 4 x 1/4 H.R. ALUMINUM OXIDE 4 x 3/8 H.R. SILICON CARBIDE 4 x 3/8 H.R. ALUMINUM OXIDE 4 x 1/2 H.R. SILICON CARBIDE 4 x 1/2 H.R. ALUMINUM OXIDE 6 x 3/8 H .R. ALUMINUM OXIDE 6 x 1/2 H.R. SILICON CARBIDE 6 x 1/2 H.R. ALUMINUM OXIDE 6 x 5/8 H.R. ALUMINUM OXIDE 6 x 3/4 H.R. ALUMINUM OXIDE 6 x 1H.R. SILICON CARBIDE 6 x 1H.R. ALUMINUM OXIDE
5 oz. 5 oz. 5 oz. 5 oz. 5 oz. 5 oz. 8 oz. 8 oz. 8 oz. 8 oz. 8 oz. 8 oz. 13 oz. 13 oz. 13 oz. 13 oz. 13 oz. 13 oz. 1 lb. 1 lb. 1 lb. 1-1/4 lbs. 1-1/4 lbs. 1-1/4 lbs. 1-1/4 lbs. 1-1/4 lbs. 1-1/4 lbs. 1-7/8 lbs. 1-7/8 lbs. 1-7/8 lbs. 2-3/8 lbs. 2-3/8 lbs. 2-3//8 lbs. 4-5/8 lbs. 4-5/8 lbs. 4-5/8 lbs. 4-5/8 lbs. 4-5/8 lbs. 4-5/8 lbs.
9
17612_Sticks_P1_10
7/20/05
2:14 PM
Page 10
Silversmiths’ Stones Broken Pkg. = 1-4 Minimum Pkg. = 5 Standard = 20 Aluminum Oxide UPC Code # Sticks & 730006 Stones # 00120 00187 00050 00123 00190 00053 00116 00183 00046 00122 00189 00052 00121 00188 00051 00117 00184 00047 00119 00186 00049 00118 00185 00048
AFF-444 AMF-444 ACF-444 AFF-474 AMF-474 ACF-474 AFF-414 AMF-414 ACF-414 AFF-464 AMF-464 ACF-464 AFF-454 AMF-454 ACF-454 AFF-424 AMF-424 ACF-424 AFF-434 AMF-434 ACF-434 AFF-433 AMF-433 ACF-433
Norton #
Carbo Bay State # #
Weight Per Std. Pkg.
Stone Size and Shape
FF-444 MF-444 CF-444 FF-474 MF-474 CF-474 FF-414 MF-414 CF-414 FF-464 MF-464 CF-464 FF-454 MF-454 CF-454 FF-424 MF-424 CF-424 FF-434 MF-434 CF-434 FF-433 MF-433 CF-433
300A 301A 302A 303A 304A 305A 306A 307A 308A 309A 310A 311A 312A 313A 314 A 315A 316A 317A 318A 319A 320A 321A 322A 323A
A246-FO A246-MO A246-CO A248-FO A248-MO A248-CO A242-FO A242-MO A242-CO A249-FO A249-MO A249-CO A247-FO A247-MO A247-CO A243-FO A243-MO A243-CO A245-FO A245-MO A245-CO A244-FO A244-MO A244-CO
7 oz. 7 oz. 7 oz. 12 oz. 12 oz. 12 oz. 7 oz. 7 oz. 7 oz. 12 oz. 12 oz. 12 oz. 7 oz. 7 oz. 7 oz. 6 oz. 6 oz. 6 oz. 11 oz. 11 oz. 11 oz. 10 oz. 10 oz. 10 oz.
4 x 1/2 x 1/16
A240-FO A240-MO A240-CO A241-FO A241-MO A241-CO A250-FO A250-MO A250-CO A251-FO A251-MO A251-CO A252-FO A252-MO A252-CO A254-FO A254-MO A254-CO A255-FO A255-MO A255-CO A256-FO A256-MO A256-CO A257 -FO A257-MO A257-CO A260-FO A260-MO
15 oz. 15 oz. 15 oz. 10 oz. 10 oz. 10 oz. 10 oz. 10 oz. 10 oz. 7 oz. 7 oz. 7 oz. 13 oz. 13 oz. 13 oz. 1 lb. 1 lb. 1 lb. 2-3/4 lbs. 2-3/4 lbs. 2-3/4 lbs. 1-7/8 lbs. 1-7/8 lbs. 1-7/8 lbs. 3 lbs. 3 lbs. 3 lbs. 12 oz. 12 oz.
FLAT 4 x 1/2 - 1/4 x 5/16 -1/8. FLAT DOUBLE TAPERED 4 x 5/16 x 3/16 - 1/16 FLAT TAPERED 4 x 1/2 - 1/4 x 5/16 - 1/8 OVAL DBL. TAPERED 4 x 1/2-3/16 x 3/16-1/16 OVAL BDL. TAPERED 4 x 3/8-3/16 x 1/8-1/16. OVAL DBL. TAPERED 4 x 7/16 x 3/16 x 1/8 OVAL FLAT TAPER SIDES 3-1/2 x 7/16 x 3/16 OVAL
Specialty Shapes – Aluminum Oxide 00125 00192 00055 00124 00191 00054 00141 00212 00068 00126 00193 00056 00127 00194 00057 00137 00208 00064 00138 00209 00065 00139 00210 00066 00140 00211 00067 00134 00204
10
AFF-644 AMF-644 ACF-644 AFF-544 AMF-544 ACF-544 AFT-134 AMT-134 ACT-134 AFF-723 AMF-723 ACF-723 AFF-724 AMF-724 ACF-724 AFT-123 AMT-123 ACT-123 AFT-124 AMT-124 ACT-124 AFT-125 AMT-125 ACT-125 AFT-126 AMT-126 ACT-126 AFT-10 AMT-10
FF-644 MF-644 CF-644 FF-544 MF-544 CF-544 FT-134 MT-134 CT-134 FF-723 MF-723 CF-723 FF-724 MF-724 CF-724 FT-123 MT-123 CT-123 FT-124 MT-124 CT-124 FT-125 MT-125 CT-125 FT-126 MT-126 CT-126 FT-10 MT-10
334A 335A 336A 337A 338A 339A 340A 341A 342A 97A 98A 99A N.A. N.A. N.A. N.A. N.A. N.A. 294F 294M 294C N.A. N.A. N.A. N.A. N.A. N.A. 18FT 18M
4 x 1/2 x 1/4 TAPERED ROUND 4 x1/2 x 1/4 TAPERED TRIANGLE 4 x 9/16 x 3/16 DIAMOND 3 x 5/16 BASE TAPERED POINT 4 x 1 x 1/8 BACK KNIFE STONE 3-1/2 x 3/4 x 3/16 REAMER STONE 4-1/2 x 1 x 5/16 REAMER STONE 5 x 1 x 3/16 REAMER STONE 6 x 1 x 1/4 REAMER STONE 4'' LONG AUGER BIT
STONE
17612_Sticks_P11_20
8/3/05
12:52 PM
Page 11
Round Edge Slip Stones F = Fine UPC Code # Sticks & Stones 730006 #
Norton #
M = Medium
Carbo. #
Bay State #
C = Coarse Size
Packaging
Weight Per Std. Pkg.
00306
FSS-10
N.A.
445F
N.A.
4 x 1 x 1/8 x 3/16
00421
MSS-10
N.A.
445M
N.A.
SILICON CARBIDE
00307
FSS-14
N.A.
186
N.A.
4 x 1 x 7/16 x 3/16
00422
MSS-14
N.A.
187
N.A.
SILICON CARBIDE
00128
AFS-14
FS-14
N.A.
A45-FO
4 x 1 x 7/16 x 3/16
00196
AMS-14
MS-14
N.A.
A45-MO
ALUMINUM OXIDE
1-3/8 lbs.
00308
FSS-24
FJS-24
177
C46-F
00423
MSS-24
MJS-24
178
C46-M
4-1/2 x 1-3/4 x 1/4 x 1/16
1-3/8 lbs.
00258
CSS-24
CJS-24
179
C46-C
SILICON CARBIDE
00130
AFS-24
FS-24
N.A.
A46-FO
00199
AMS-24
MS-24
N.A.
A46-MO
4-1/2 x 1-3/4 x 1/4 x 1/16
00059
ACS-24
CS-24
N.A.
A46-CO
ALUMINUM OXIDE
00131
AFS-34
FS-34
N.A.
A47-FO
00201
AMS-34
MS-34
N.A.
A47-MO
4-1/2 x 1-3/4 x 3/8 x 1/8
Min. = 5
00060
ACS-34
CS-34
N.A.
A47-CO
ALUMINUM OXIDE
Std. = 10
00311
FSS-44
FJS-44
183
C48-F
00424
MSS-44
MJS-44
184
C48-M
4-1/2 x 1-3/4 x 1/2 x 3/16
00259
CSS-44
CJS-44
185
C48C
SILICON CARBIDE
1 lb. 1-3/8 lbs.
1-3/8 lbs. Bkn. = 1-4 2 lbs.
2-1/2 lbs.
00132
AFS-44
FS-44
N.A.
A48-FO
00203
AMS-44
MS-44
N.A.
A48-MO
4-1/2 x 1-3/4 x 1/2 x 3/16
00061
ACS-44
CS-44
N.A.
A48-CO
ALUMINUM OXIDE
00426
MSS-54
MJS-54
181
C49-M
4-1/2 x 2-1/8 x 5/8 x 5/16
00129
AFS-15
FS-15
293F
A50-FO
5 x 1 x 5/16 x 3/32
00197
AMS-15
MS-15
293M
A50-MO
ALUMINUM OXIDE
1-1/8 lbs. 5-3/4 lbs.
00313
FSS-66
FJS-66
174
C51-F
00427
MSS-66
MJS-66
175
C51-M
6 x 2-1/4 x 3/4 x 3/8
00261
CSS-66
CJS-66
176
C51-C
SILICON CARBIDE
2-1/2 lbs. 3-1/4 lbs.
Arkansas Round Edge Slip Stones Hard and Soft Arkansas 00344
HAS-3
HS-3
3 x 1-3/4-2 x 1/4-3/8 x 1/16-1/8 Hard
00345
HAS-4
HS-4
4 x 1-3/4-2 x 3/8-1/2 x 1/8-3/16 Hard
00347
HAS-14
HS-14
4 x 1-1/4-1-1/2 x 1/4-3/8 x 1/8 Sharp Edge
00445
SAS-4
SS-4
4 x 1-3/4-2 x 3/8-1/2 x 1/8-3/16 Soft
Bkn.=1-4 Min.=5 Std.=10
1-1/2 lbs. 2-1/2 lbs. 1-3/8 lbs. 2 lbs.
Hard Arkansas Carving Tools 00346
HAS-12
HS-12
2-1/4 x 7/8 x 3/16 Round Edge Double Angle
00348
HAS-22
HS-22
2-1/4 x 7/8 x 3/16 Round Edge Single Angle
00349
HAS-32
HS-32
2-1/4 x 7/8 x 3/16 Square Edge Double Angle
00350
HAS-42
HS-42
2-1/4 x 7/8 x 3/16 Square Back Knife Blade
Bkn.=1-4 Min.=5 Std.=10
12 oz. 12 oz. 12 oz. 8 oz.
Hard Arkansas Jewelers Stone & Penknife Pieces And Soft Arkansas Penknife Pieces 00323
HAB-24
HB-24
4 x 2 x 3/8-1/2 Jewelers Stone
Min. = 1, Std. = 5
2 lbs.
00321
HAB-13
HB-13
3 x 1 x 1/4-3/8 Penknife Piece
Min. = 5, Std. = 10
1-1/4 lbs.
00322
HAB-14
HB-14
4 x 1 x 1/4-3/8 Penknife Piece
Min. = 5, Std. = 10
1-3/4 lbs.
00438
SAB-13
SB-13
3 x 1 x 1/4-3/8 Soft Penknife Piece
Min. = 5, Std. = 10
1-1/4 lbs.
00439
SAB-14
SB-14
4 x 1 x 1/4-3/8 Soft Penknife Piece
Min. = 5, Std. = 10
1-3/4 lbs.
11
17612_Sticks_P11_20
7/20/05
2:03 PM
Page 12
Aluminum Oxide Engravers Pencils UPC Code # Sticks & Stones 730006 # 00357
HIT-17
Norton #
Size and Description
Packaging
Weight Per Std. Pkg.
IT-17
7" Long Pencil w/1/8" square India Stone
Min. = 5, Std. = 10
14 oz.
Engravers Chuck and Points 00469
SSXT-1
XT-1
Chuck Only
Min. = 5, Std. = 10
6 oz.
00135
AFT-11
FT-11
1 x 1/8 Round FIne Aluminum Oxide
B = 1, M = 5 S = 20
3 oz.
Arkansas Bench Stones – Hard & Soft 00318
HAB-4
HB-4
4 x 2 x 3/4-1 Hard Bench Stone
Min. = 1, Std. = 5
3 lbs.
00319
HAB-6
HB-6
6 x 2 x 3/4-1 Hard Bench Stone
Min. = 1, Std. = 5
4-3/4 lbs.
00320
HAB-8
HB-8
8 x 2 x 3/4-1 Hard Bench Stone
Min. = 1, Std. = 5
6-1/4 lbs.
00435
SAB-4
SB-4
4 x 2 x 3/4-1 Soft Bench Stone
Min. = 1, Std. = 5
3 lbs.
00436
SAB-6
SB-6
6 x 2 x 3/4-1 Soft Bench Stone
Min. = 1, Std. = 5
4-3/4 lbs.
00437
SAB-8
SB-8
8 x 2 x 3/4-1 Soft Bench Stone
Min. = 1, Std. = 5
6-1/4 lbs.
Mounted Arkansas Bench Stones in Box – Hard & Soft 00340
HAM-4
HM-4
4 x 1-7/8 Hard Mounted Bench Stone
Min. = 1, Std. = 5
3 lbs.
00341
HAM-6
HM-6
6 x 1-7/8 Hard Mounted Bench Stone
Min. = 1, Std. = 5
5-3/4 lbs.
00342
HAM-8
HM-8
8 x 1-7/8 Hard Mounted Bench Stone
Min. = 1, Std. = 5
7-3/4 lbs.
00440
SAM-3
SM-3
3-1/2 x 1 Soft Mounted Bench Stone
Min. = 1, Std. = 5
1-1/4 lbs.
00441
SAM-4
SM-4
4 x 1-7/8 Soft Mounted Bench Stone
Min. = 1, Std. = 5
3 lbs.
00442
SAM-6
SM-6
6 x 1-7/8 Soft Mounted Bench Stone
Min. = 1, Std. = 5
5-3/4lbs.
00443
SAM-8
SM-8
8 x 1-7/8 Soft Mounted Bench Stone
Min. = 1, Std. = 5
7-3/4lbs.
Arkansas Square and Triangle Files 00326
HAF-13
HF-13
3-3-1/2 x 1/4 Square
B = 1, M = 5 S = 10
00327
HAF-33
HF-33
3-3-1/2 x 3/8 Square
B = 1, M = 5 S = 10
9 oz.
00328
HAF-43
HF-43
3-3-1/2 x 1/2 Square
B = 1, M = 5 S = 10
14 oz.
00329
HAF-113
HF-113
3-3-1/2 x 1/4 Triangle
B = 1, M = 5 S = 10
3 oz.
00330
HAF-133
HF-133
3-3-1/2 x 3/8 Triangle
B = 1, M = 5 S = 10
5 oz.
00331
HAF-143
HF-143
3-3-1/2 x 1/2 Triangle
B = 1, M = 5 S = 10
7 oz.
12
4 oz.
17612_Sticks_P11_20
7/20/05
2:03 PM
Page 13
Special Shaped Arkansas Files – Hard Only UPC Code # Sticks & Stones 730006 #
Norton #
Size and Description
Packaging
Weight Per Std. Pkg.
3-3-1/2 x 1/4 x 5/16 Round
B = 1, M = 5 S = 10
5 oz.
00332
HAF-813
HF-813
00333
HAF-823
HF-823
3-3-1/2 x 3/8-1/2 x 1/8-3/16 Flat
B = 1, M = 5 S = 10
6 oz.
00334
HAF-833
HF-833
3-3-1/2 x 3/8-1/2 x 1/8-3/16 Bevel
B = 1, M = 5 S = 10
6 oz.
00335
HAF-843
HF-843
3-3-1/2 x 1/2 x 3/16-1/4 Diamond
B = 1, M = 5 S = 10
5 oz.
00336
HAF-853
HF-853
3-3-1/2 x 1/2 x 3/16-1/4 Oval
B = 1, M = 5 S = 10
6 oz.
00337
HAF-863
HF-863
3-3-1/2 x 1/4 Base - Point
B = 1, M = 5 S = 10
3 oz.
00338
HAF-873
HF-873
3-4 x 3/4-1 x 1/8-1/4 Knife Blade
B = 1, M = 5 S = 10
7 oz.
Jointer Stones provide a fast method of restoring and maintaining the cutting edges of mechanical jointing devices on automatic planers
Jointer Stones UPC Code # Sticks & Stones 730006 #
Norton #
Carbo. #
Bay State #
Size
Packaging
Weight Per Std. Pkg. 1 lb.
00456
SE-64
JE-54
425
C-149
1/4 x 3/4 x 4
B = 1, M = 5 S = 10
00457
SE-64
JE-64
428
C-150
5/16 x 3/4 x 4
B = 1, M = 5 S = 10
1 lb.
00458
SE-74
JE-74
390
C-151
3/8 x 3/4 x 4
B = 1, M = 5 S = 10
1-1/2 lbs.
00459
SE-84
JE-84
373
C-152
1/2 x 3/4 x 4
B = 1, M = 5 S = 10
1-1/2 lbs.
00460
SE-104
JE-104
391
C-153
3/4 x 3/4 x 4
B = 1, M = 5 S = 10
2-1/8 lbs.
00071
AE-54
IE-54
425
A-149-O
1/4 x 3/4 x 4
B = 1, M = 5 S = 10
1 lb.
00072
AE-64
IE-64
428
A-150-O
5/16 x 3/4 x 4
B = 1, M = 5 S = 10
1 lb.
00073
AE-74
IE-74
426
A-151-O
3/8 x 3/4 x 4
B = 1, M = 5 S = 10
1-1/2 lbs.
00074
AE-84
IE-84
438
A-152-O
1/2 x 3/4 x 4
B = 1, M = 5 S = 10
1-1/2 lbs.
00075
AE-104
IE-104
440
A-153-O
3/4 x 3/4 x 4
B = 1, M = 5 S = 10
2-1/8 lbs.
M = 1, S = 10
1-1/2 lbs.
Pocket Stone With Plastic Pouch Medium Grit (220) Silicon Carbide 00368
JP-14
00463
SJP-13
JP-14
149
N.A.
3 x 7/8 x 3/8
Medium Silicon Carbide (220) Pocket Stones JP-14
149
N.A.
3 x 7/8 x 3/8 Med. S/C
M = 1, S = 10
1-1/4 lbs.
This world renowned hand hone of Norton Green Crystolon is the most famous sharpening stone known to industry. Available in Three Grit Sizes, 220 – 280/320 and 400.
00315
GSHH-13
CG220-PV
39
3/8 x 3/16 x 4-3/16 Green S/C
Sold in brackets
50 = 7-1/2 lbs.
00316
GSHH-14
CG280/320-PV
38
3/8 x 3/16 x 4-3/16 Green S/C
Sold in brackets
50 = 7-1/2 lbs.
00317
GSHH-15
CG400-PV
37
3/8 x 3/16 x 4-3/16 Green S/C
Sold in brackets
50 = 7-1/2 lbs.
13
17612_Sticks_P11_20
7/20/05
2:03 PM
Page 14
Molded Boat Rubs UPC Code # 730006
Size and Description
*
1-1/2 x 2-3/8 x 9 Aluminum Oxide
60 & 80
See Price Book
*
1-1/2 x 2-3/8 x 9 Silicon Carbide
46 & 80
See Price Book
Grit
Aluminum Oxide (India) Gouge Sharpening Stone UPC Code # Sticks & Stones 730006 # 00133
AFS-76
The Gouge Stone is indespensable for the tools of the artist, craftsman and woodworkers. Designed for curved edge tools.
Norton #
Carbo. #
Bay State #
Size
Packaging
Weight Per Std. Pkg.
FS-76
15
A115-FO
6 x 2 x 1 x 1/2 x 3/8
B = 1, M = 5, S = 10
5-3/4 lbs.
Aluminum Oxide (India) Carving Slips
Carving Tool Slips are excellent for final finish on all carving tools. The extreme hardness gives long life. Medium Grit only.
00195
AMS-12
MS-12
N.A.
A82-MO
2-1/4 x 7/8 x 3/16
B = 1, M = 5, S = 20
13 oz.
00198
AMS-22
MS-22
N.A.
A83-MO
2-1/4 x 7/8 x 3/16
B = 1, M = 5, S = 20
11 oz.
00200
AMS-32
MS-32
N.A.
A84-MO
2-1/4 x 7/8 x 3/16
B = 1, M = 5, S = 20
10 oz.
00202
AMS-42
MS-42
N.A.
A81-MO
2-1/4 x 7/8 x 3/16
B = 1, M = 5, S = 20
8 oz.
Silicon Carbide Hand Hones Carving Tool Slips are excellent for final finish on all carving tools. The extreme hardness gives long life. Medium Grit only.
00314
FST-63
FJT-63
F33
C237
3-1/2 x 3/4 x 1/2
B = 1, M = 5, S = 20
00428
MST-63
MJT-63
M33
C238
3-1/2 x 3/4 x 1/2
B = 1, M = 5, S = 20
2 lbs.
00262
CST-63
CJT-63
C33
C239
3-1/2 x 3/4 x 1/2
B = 1, M = 5, S = 20
2 lbs.
General Purpose File 00473
ST-911
JT-911
198
C253
9-1/2 x 1-3/8 x 1/2
2 lbs.
The right size and shape to allow widespread use on a variety of home and garden tools. M = 1, S = 10
5 lbs.
Utility Files SD-2 Medium, Single Grit
14
SD-3 Combination, Coarse/Fine
00454
SD-2
JD-2
57
C5
14" Overall
B = 1, M = 5, S = 10
12-1/2 lbs.
00455
SD-3
JD-3
75
N.A.
14" Overall
B = 1, M = 5, S = 10
12-1/2 lbs.
17612_Sticks_P11_20
7/20/05
2:03 PM
Page 15
Carving Knife Sharpener Sharpener is medium grit, reinforced with steel rod. UPC Code # Sticks & Stones 730006 # 00467
SKPT-2
Norton #
Carbo. #
Size and Description
Packaging
Weight Per Std. Pkg.
KPT-2
76
13-3/4" O/A with Handle
B = 1, M = 5, S = 20
11 lbs.
Kitchen Knife Sharpener For all kitchen knives, fine grit. 00433
S273A
273A
66
7-1/2" O/A with Handle
M = 1, S = 10
3 lbs.
Home and Garden Sharpener One flat side, one convex, ideal for all garden tools. 00466
SJT-8
JT-8
46
10-1/2" O/A with Handle
B = 1, M = 5, S = 20
10 lbs.
Combination Axe Stone The Combination Axe Stone is the best tool for axe & hatchet sharpening, coarse/fine, lubricate with oil. 00465
SJT-3
JT-3
196
C-120
3" Dia. x 5/8" Thick
M = 1, S = 10
3 lbs.
Machine Knife Stone The Machine Knife Stone is for the sharpening and honing of paper, cloth and veneer knives while on the machine. No need to remove the knives from the machine until in need of a major re-grind. Each stone has a finger groove to provide safety. Oil filled combinatian grit. 00451
SB-74
JB-74
289
4" Dia. x 1-1/2" Thick
M = 1, S = 5
6-1/4 lbs.
Scythe Stones Aluminum Oxide = ATD-1 Silicon Carbide = TS-3
Made for scythes, sickles and mowing machines. 00214
ATD-1
TD-1
188
10 x 1-5/16 x 3/4
B = 1, M = 5, S = 10
8 lbs.
00481
TS-3
TJ-3
192
10 x 1-1/4 x 3/4
B = 1, M = 5, S = 10
8 lbs.
Tradesmen’s Stones For sharpening of knives for trimming leather, rubber, plastic and carpet. ST-930 is combination, ST-920 is single grit medium, ST-910 no handle. 00475
ST-930
JT-930
75
14-3/4" O/A with Handle
B = 1, M = 5, S = 10
9 lbs.
00474
ST-920
JT-920
129
14-3/4" O/A with Handle
B = 1, M = 5, S = 10
9 lbs.
00472
ST-910
JT-910
N.A.
10 x 1-1/4 x 3/4
B = 1, M = 5, S = 10
7 lbs.
15
17612_Sticks_P11_20
7/20/05
2:03 PM
Page 16
Wheel Dresser The Wheel Dresser is widely used to clean, true and shape the face of a grinding wheel, used with the ST-246 Dressing Stick below. UPC Code # Sticks & Stones 730006 # 00354
HD-6
Norton #
Carbo. #
Size and Description
Packaging
Weight Per Std. Pkg.
H-6
55
10" O/A with Handle
B = 1, M = 5, S = 10
5-5/8 lbs.
Dressing Sticks Dressing Sticks are commonly used by hand or in the HD-6 above. Used to clean, true or form the face of a grinding wheel. 00470
ST-246
JT-246
56
1/2" Round x 6" Long
B = 1, M = 5, S = 10
1 lb.
00471
ST-276
JT-276
N.A.
1" Round x 6" Long
B = 1, M = 5, S = 10
3-5/8 lbs.
Cutlery Bench Stones Giant Combination Fine & Coarse in metal box.
UPC Code # Sticks & Stones 730006 #
Size and Description
Packaging
Weight Per Std. Pkg.
00360
IM-11
Stone w/box 11-1/2 x 2-1/2 x 1 Coarse & Fine A/O
M = 1, S = 2
10 lbs.
00358
IM-2
Stone only 11-1/2 x 2-1/2 x 1 Coarse & Fine A/O
M = 1, S = 2
5 lbs.
00373
JUM-22
Stone w/box 11-1/2 x 2-1/2 x 1 Coarse & Fine S/C
M = 1, S = 2
10 lbs.
00371
JUM-3
Stone only 11-1/2 x 2-1/2 x 1 Coarse & Fine S/C
M = 1, S = 2
5 lbs.
Crystolon Cutlers Stone Coarse & Fine combination stone only 00372
JUM-4
Stone only 1/2 x 2-1/2 x 1-1/2 Coarse & Fine S/C
M = 1, S = 2
7 lbs.
Reversible Oil Stone in Beautiful Hinged Wood Box with Latch 00356
HIB-27
Stone w/box 7 x 2 x 1 Fine A/O & Hard Arkansas
M = 1, S = 2
5 lbs.
00462
SIB-27
Stone w/box 7 x 2 x 1 Medium A/O & Soft Arkansas
M = 1, S = 2
5 lbs.
Wood Boxes Only For use with any stone you prefer.
16
00476
SXT-4
Bench Stone Box for all 4 x 2 x 1 Stones
Sold in brackets
*
00477
SXT-6
Bench Stone Box for all 6 x 2 x 1 Stones
Sold in brackets
*
00478
SXT-8
Bench Stone Box for all 8 x 2 x 1 Stones
Sold in brackets
*
17612_Sticks_P11_20
7/20/05
2:04 PM
Page 17
S&S Burr Breaker The perfect, lowest cost method of removing burrs from magnetic chucks and for scouring any flat metal surface. UPC Code # Sticks & Stones 730006 *
Burr Breaker
Size
One Specification Only
Sold in Quantity Brackets
1-5/8 x 4 x 4
Standard
1 - 3 - 10 - 25+
Blanchard “Burr Busters” For use in removing burrs on magnetic chucks or scouring any flat surface.
UPC Code # 730006
The Blanchard Company
Size
One Specification Only
Sold in Quantity Brackets
00524
Burr Buster
1-9/16 x 4-3/8 x 6
Standard
1 - 5 - 10
Aluminum Oxide/ Soft Arkansas Combo A unique combination stone made by bonding a coarse aluminum oxide stone and a soft Arkansas stone together.
00461
SIB-6
Stone only 6 x 2 x 1 Coarse A/O & Soft Arkansas Comb.
M = 1, S = 5
6 lbs.
Norton Multi-Oilstone Units The Norton Multi-Oilstone is the most popular choice of commercial kitchens across the country. For complete sharpening of all cutlery. This combination of three oil filled, reversible stones includes coarse Crystolon, medium Crystolon, and precision sharpening fine India stones. The two sides not in use are immersed in oil. There is a heavy non-skid base with suction cup foot-pieces. Unit comes with one pint of Norton Bear Brand sharpening oil. Replacement parts are available on request.
UPC Code # Sticks & Stones 73006
Size and Description
Weight Per Std. Pkg.
Packaging
00363
IM-313
5-1/2 x 6 x 16
13 lbs.
Standard = 1
00362
IM-100
4 x 4 x 9-1/2
3 lbs.
Standard = 1
Replacement Stones 00351
HR-115
11-1/2 x 2-1/2 x 1/2 Hard Arkansas
1-1/4 lbs.
Standard = 1
00359
IM-9
11-1/2 x 2-1/2 x 1/2 Fine India
3 lbs.
M = 1, S = 2
00365
JM-6
11-1/2 x 2-1/2 x 1/2 Medium S/C
3 lbs.
M = 1, S = 2 M = 1, S = 2
00364
JM-3
11-1/2 x 2-1/2 x 1/2 Coarse S/C
3 lbs.
00468
SR-115
11-1/2 x 2-1/2 x 1/2 Soft Arkansas
1 lb.
S=1
03000
HR-26
6 x 2 x 1/2 Hard Arkansas
3 lbs.
M = 1, S = 5
00361
IM-91
6 x 2 x 1/2 Fine India
3 lbs.
M = 1, S = 5
00367
JM-61
6 x 2 x 1/2 Medium S/C
3 lbs.
M = 1, S = 5
00366
JM-31
6 x 2 x 1/2 Coarse S/C
3 lbs.
M = 1, S = 5
03001
SR-26
6 x 2 x 1/2 Soft Arkansas
3 lbs.
M = 1, S = 5
17
17612_Sticks_P11_20
7/20/05
2:04 PM
Page 18
Griddle Bricks Griddle Bricks – The sanitary method of cleaning and scouring griddles and cooking plates. Faster, easier, as well as cleaner and less expensive than all other methods. Rounded edges for comfortable hand grip. Not oil filled. Available only in medium grit. Sold in quantity brackets found in price book. UPC Code # Sticks & Stones 730006 # 00142
Norton #
Carbo. #
Bay State #
Size
Weight Per Stone
IT-4
217
A-201
4-1/2 x 3 x 2
1-3/4 lbs.
AIT-4
Rubbing Brick with Handle Hand Rubs with plastic handles make quick work of removing mold marks, rubbing down green concrete and are ideal for floor, overhead and wall work. Concrete workers and masons appreciate the handle which reduces fatigue. Extra coarse.
UPC Code # Sticks & Stones 730006 #
Norton #
Industry #
Size
Weight Per Stone
00516
SHR-250
235
HR-250
8 x 3-1/2 x 1-1/2
1-3/4 lbs.
00517
SHR-252
BFH-6
HR-252
6x3x1
1-1/4 lbs.
Rubbing Bricks – Plain & Fluted Silicon carbide rubbing bricks without handles are available in two types, plain and fluted. Plain rubs are the choice of machinists and foundrymen for dressing grinding wheels and cleaning and scouring castings. Fluted rubs are used in concrete applications for rubbing down green concrete to remove mold marks. The diagonal flutes provide shearing action and carry away debris. Sold in quantity brackets.
UPC Code # 730006
Sticks & Stones
Industry #
Size
Type
Weight Per Stone
00498
SHR-201/BP-14
HR-201
4x2x1
Plain
3/4 lbs.
00499
SHR-202/BP-24
HR-202
4x2x2
Plain
1-1/3 lbs.
00502
FR510/SHR-211/BP-16
HR-211
6x2x1
Plain
1 lb.
00503
SHR-213/BP-26
HR-213
6x2x2
Plain
2-1/4 lbs.
00507
FR520/SHR-222/BP-18
HR-222
8x2x1
Plain
1-3/4 lbs.
00508
SHR-225/BP-28
HR-225
8x2x2
Plain
2-3/4 lbs.
00512
SHR-241/BF-26
HR-241
6x2x2
Fluted
2 lbs.
00513
SHR-242/BF-28
HR-242
8x2x2
Fluted
2-1/2 lbs.
Half Round Foundry Core Files
UPC Code # 730006
Product Number
A Dimension
L Dimension
02370
#25 Half Round
3-3/4"
6"
8"
Large 7/16 x 7/8, Small 5/16 x 5/8
02371
#26 Half Round
5-1/4"
8"
11"
Large 15/32 x 15/16, Small 11/32 x 11/16
02372
#27 Half Round
6-3/4"
10"
13"
Large 17/32 x 1-1/16, Small 3/8 x 3/4
02373
#28 Half Round
8-1/4"
12"
15"
Large 19/32 x 1-3/16, Small 7/16 x 7/8
18
Overall Length
End Size
17612_Sticks_P11_20
7/20/05
2:04 PM
Page 19
Flat Core Files with Plastic Handles Fiberglass Reinforced – S/C Resin Bond Lower cost flat core files are available in any size desired. They are centrally reinforced with fiberglass to retard breakage. Made of resin bond silicone carbide abrasive in a very coarse grit to aggressively file sand cores.They are custom made to any size required, but come in a number of standard sizes as follows: Standard Size List 1/8 x 1/2 x 8 1/8 x 1 x 9 1/8 x 1 x 12 1/4 x 1 x 9
1/4 x 1 x 12 1/4 x 2 x 12 1/2 x 1 x 9 1/2 x 1 x 10
1/2 x 1 x 12 1/2 x 2 x 10 1/2 x 2 x 12
Flat core files are much more economical to use than the metal tang type, half round core files mentioned earlier. Big savings are available by using this type file. All are made from a very coarse grit silicon carbide abrasive of a very hard resin bond for long life and aggressive cut.
Jointer & Pattern Stones We custom manufacture jointer and pattern stones for all applications. We stock slabs from which we cut all sizes and specifications used in joining and molding manufacturing. We make any size, abrasive type, grit size and hardness from slabs which are in stock. Lead time is only three weeks. Standard size list as follows: Standard Size List 1/4 x 3/4 x 4 5/16 x 3/4 x 4 3/8 x 3/4 x 4 3/4 x 3/4 x 4 3/4 x 2 x 4 3/4 x 2 x 6 .590 x 2 x 6 .590 x 2-1/4 x 6 .590 x 2 x 6 Molding and pattern stones are available in superfine grit down to 1200.
1/2 x 3/4 x 4 3/4 x 2 x 8 .590 x 2-1/4 x 8
Dressing Sticks For Vitrified Grinding Wheels - Stock Sizes 1/2 x 1/2 x 6 C24-RV 1 x 1 x 6 C24-RV 1/2 x 1 x 6 C24-RV 2 x 2 x 6 C24-RV 1 x 6 RD. C24-RV
3/4 1 2 1 1
x x x x x
3/4 x 6 C24-RV 2 x 6 C24-RV 2 x 8 C24-RV 1 x 6 C46-RV 1 x 8 C46-RV
3/4 x 3/4 x 8 C24-RV 1 x 1 x 8 C24-RV 1 x 2 x 8 C24-RV 1/2 x 6 RD. C24-RV
For Diamond & CBN Wheels - Stock Sizes 1/2 x 1/2 x 6 38A150-IVBE 1/2 x 1/2 x 6 x 38A220-IVBE 3/4 x 3/4 x 4 38A150-IVBE 3/4 x 3/4 x 4 x 38A220-IVBE 1 x 1 x 6 38A150-IVBE 1 x 1 x 6 x 38A220-IVBE Many other sizes are available but may be limited in stock. Please call our excellent customer service staff for custom sizes, specifications and recommendations.
19
17612_Sticks_P11_20
7/20/05
2:04 PM
Page 20
Mold & Diemakers Polishing Stones Series
Type
Description
D
Diemaker
M
Moldmaker
EDM
EDM
HM
Hard Moldmaker
SF
Super Fine
Calcined Alumina with a soft bond, 900 grit only, for superfinishing applications.
B
Resin Bond
Very Hard Aluminum Oxide for fine detail work, holds shape and produces a fine finish.
OT
Hard Polishing
WT
General Polishing
R
Ruby
Medium Hard Regular Aluminum Oxide, for fast cutting action, for general polishing. Solft Silicon Carbide, non loading with even breakdown readily conforms to shape fo work surface. Special Aluminum Oxide for use on electrical discharge machining surfaces. Medium Hard Silicon Carbide for general polishing.
Premium Aluminum Oxide in a hard bond, holds shape for polishing ribs, slots & etc., oil treated. Premium Aluminum Oxide in a medium hard bond for general polishing, wax treated for load resistance. Aluminum Oxide with a soft bond for fast stock removal.
Availability Chart Pencil Stones
Diemaker Stones
5/32 x 5/32 x 4
General Purpose Alum. Oxide, Medium Hard, White to Tan
PSA
PSR
PSO
Diemaker Resin Bonded Oil Treated Alum. Oxide Alum. Oxide Alum. Oxide Medium Hard Extra Hard Hard White To Tan Dark Brown Cream Color
PSE EDM Stone Premium A/O Hard Salmon Color
Size
100
150
220
320
400
500
600
1/4" RD. x 6 3/8" RD. x 6 1/2" RD. x 6 1/16 x 1/4 x 6
Grit
Price
Grit
Price
Grit
Price
Grit
Price
1/8 x 1/4 x 6 1/4 x 1/4 x 6
150
180
120
120
220
220
220
150
3/8 x 3/8 x 6
320
320
320
180
1/16 x 1/2 x 6
400
400
400
220
1/8 x 1/2 x 6
500
600
600
320
1/4 x 1/2 x 6
600
N.A.
N.A.
400
1/2 x 1/2 x 6
800
N.A.
N.A.
500
1/4 x 1 x 6
900
N.A.
N.A.
600
1/8 x 1 x 6 1/4 x 3/4 x 6 1/2 x 1 x 6 1x1x6
20
All sizes in all grits available
900
17612_Sticks_P21_30
7/20/05
10:02 AM
Page 21
Moldmaker Stones Soft Silicon Carbide Vitrified, Green, Gray, Black Stone Size 1/4" RD. x 6 3/8" RD. x 6 1/2" RD. x 6 1/16 x 1/4 x 6 1/16 x 1/2 x 6 1/8 x 1/4 x 6 1/8 x 1/2 x 6 1/8 x 1 x 6 3/16 x 1/2 x 6 1/4 x 1/4 x 6 1/4 x 1/2 x 6 1/4 x 1 x 6 3/8 x 3/8 x 6 1/2 x 1/2 x 6 3/4 x 3/4 x 6 1x1x6
150
220
Grit 320 400
500
600
EDM Stones Hard Premium Aluminum Oxide, Vitrified Bond, Salmon Color Stone Size
100 120
1/16 x 1/4 x 6 1/16 x 1/2 x 6 1/8 x 1/8 x 6 1/8 x 1/4 x 6 1/8 x 1/2 x 6 3/16 Sq. x 6 1/4 x 1/4 x 6 1/4 x 1/2 x 6 3/8 x 3/8 x 6 1x1x6 1/4 Rd. x 6
All sizes in all grits available
Grit 220 320
150 180
400
500
600
All sizes in all grits available
All are custom made and have no UPC code numbers Rounds are considered specials and may require long lead time.
Hard Moldmakers Stones Hard Silicon Carbide Vitrified, Green, Gray, Black Stone Size 1/16 x 1/4 x 6 1/16 x 1/2 x 6 1/8 x 1/4 x 6 1/8 x 1/2 x 6 1/8 x 1 x 6 1/4 x 1/4 x 6 1/4 x 1/2 x 6 1/4 x 1 x 6 3/8 x 3/8 x 6 1/2 x 1/2 x 6 3/4 x 3/4 x 6 1x1x6
46
60
80
100
150
Grit 220
320
400
500
600
Superfine Stones Calcined Alumina, Soft Bond 6" Only 900 Grit, White In Color Stone Size
All sizes in all grits available
Quantity 1-11 Each 1-4 Doz. 5-9 Doz. 10 Doz. +
1/8 1/4 1/8 1/4 1/2
x x x x x
1/4 1/4 1/2 1/2 1/2
x x x x x
Price Each
6 6 6 6 6
Discount Net 10% 15% 30% 21
17612_Sticks_P21_30
7/20/05
10:02 AM
Page 22
Resin Bonded Stones
Hard Polishing Stones
Regular A/O, Hard Bond, Dark Brown Color
Preminum Aluminum Oxide, Vit. Oil Treated, Cream
Stone Size
80
1/16 x 1/4 x 6 1/16 x 1/2 x 6 1/8 x 1/8 x 6 1/8 x 1/4 x 6 1/8 x 1/2 x 6 3/16 Sq. x 6 1/4 x 1/4 x 6 1/4 x 1/2 x 6
120 180
Grit 220 320 400 600
All sizes in all grits available
Stone Size
100
1/16 x 1/4 x 6 1/16 x 1/2 x 6 1/8 x 1/4 x 6 1/8 x 1/2 x 6 1/8 x 1 x 6 1/4 x 1/4 x 6 1/4 x 1/2 x 6 1/4 x 1 x 6 3/8 x 3/8 x 6 1/2 x 1/2 x 6 1/2 x 1 x 6 1x1x6
150
220
Grit 320
400
500
All sizes in all grits available
General Polishing Stones
Ruby Stones
Semi Hard, A/O, Vitrified, Wax Treat, Off White Color
Fast Cutting A/O, Pink Color
Stone Size 1/16 x 1/4 x 6 1/16 x 1/2 x 6 1/8 x 1/4 x 6 1/8 x 1/2 x 6 1/8 x 1 x 6 1/4 x 1/4 x 6 1/4 x 1/2 x 6 1/4 x 1 x 6 3/8 x 3/8 x 6 1/2 x 1/2 x 6 1/2 x 1 x 6 1x1x6
Grit 100 150 220 320 400 500 600 800 900 1000
All sizes in all grits available
Quantity 1-11 Each 1-4 Doz. 5-9 Doz. 10 Doz. +
600
Stone Size
46
1/8 x 1/4 x 6 1/8 x 1/2 x 6 3/16 Sq. x 6 1/4 x 1/4 x 6 1/4 x 1/2 x 6 1/4 x 1 x 6 3/8 x 3/8 x 6 1/2 x 1/2 x 6 1/2 x 1 x 6 1x1x6 1x2x6 1x2x8
60
Grit 80 100 150 220
All sizes in all grits available
Discount Net 10% 15% 30%
Distributor discount is calculated only after quantity discount is taken Rounds are considered specials and may require long lead time. We stock many rounds in a variety of sizes and specifications, Please contact us for availability of rounds you require.
22
17612_Sticks_P21_30
7/20/05
10:02 AM
Page 23
Metal Polishing & Cleaning Rubber Bond Sticks Stone Size
Length
Grit Sizes
Hardness
Available Shapes
1/4" 3/8", 1/2", 5/8" 3/4" & 1"
To 6" To 8" To 12"
54 Thru 220 54 Thru 220 54 Thru 220
Soft, Firm, Hard Soft, Firm, Hard Soft, Firm, Hard
Round, Triangle, Square Round, Triangle, Square Round, Triangle, Square
Rubber Bond Polishing Pieces
Thickness
Bias Cut Width
Length
Thickness
1/4" 3/8" 1/2" 3/4"
1" 1-1/8" 1-1/8" 2"
2" 2-1/4" 2-3/4" 3-1/4"
1/4" 3/8" 1/2" 3/4"
Rectangular Blocks Width To To To To
12" 12" 12" 12"
Length To To To To
12" 12" 12" 12"
Cotton Fiber Reinforced Resin Sticks Cross Section
Length
Grit Sizes
Hardness
Available Shapes
1/4" 3/8", 1/2", 5/8" 3/4" & 1"
To 8" To 8" To 12"
54 Thru 320 54 Thru 320 54 Thru 320
F Thru K F Thru K F Thru K
Round, Triangle, Square Round, Triangle, Square Round, Triangle, Square
Honing Oils S&S Honing Oils are specially compounded for ferrous and non ferrous honing to: 1. Dissipate heat from the workpiece. 3. Flush bore free of honing swarf 2. Lubricate stones in contact with bore. 4. Maintain clean free cutting conditions
S&S-230 Honing Oil A petroleum-based sulphurized honing oil recommended for precision honing of ferrous metals and alloys used for all steel, cast iron carbide, aluminum, bronze and ceramics. Used with all types of honing equipment. S&S-230-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Gallon Pail S&S-230-55 . . . . . . . . . . . .55 Gallon Drum (nonreturnable)
S&S-130 Honing Oil A heavy duty non-chlorinated honing oil for use for ferrous and non-ferrous metals. Excellent for external as well as internal applications. Excellent for Superior type and Tennessee type two stone honing Systems. S&S-130-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Gallon Pail S&S-130-55 . . . . . . . . . . . .55 Gallon Drum (nonreturnable)
23
17612_Sticks_P21_30
7/20/05
10:02 AM
Page 24
Convert your standard drill press into a hone in seconds with the: MD-1 Mandrel Driver The MD-1 is the answer to all non-production honing in any shop. Converts any drill press into a hone with the flip of a wrist, no tools necessary. Available with #2, 3, or 4 Morse Taper, straight or special shanks available. Will drive all standard two stone honing mandrels in 1/8" through 3". Included in all honing kits shown below.
DK-500 1/8" to 1/2" inclusive, consisting of: 1-DK-50 Mandrel Case 7 Mandrels 1/8" to 1/2" 7 Sets of Stones Shipping Weight: 12 lbs. TRK-1000 3/16" to 1" inclusive, consisting of: 1-MD-1 Mandrel Driver No. 2, 3, or 4 Morse Taper 1-MD-100 Mandrel Case 13 Mandrels 3/16" to 1" inclusive 13 Sets Roughing Stones 13 Sets Semi-finishing Stones Shipping Weight: 39 lbs.
TRK-2500 3/16" to 2-1/2" inclusive, consisting of: 1-MD-1 Mandrel Driver No. 2, 3, or 4 Morse Taper 1-MD-150 Mandrel Case 1-MD-250 Mandrel Case 25 Mandrels 3/16" to 2-1/2" inclusive 25 Sets Roughing Stones 25 Sets Semi-finishing Stones Shipping Weight: 120 lbs.
TRK-3000 3/16" to 3" inclusive, consisting of: 1-MD-1 Mandrel Driver No. 2, 3, or 4 Morse Taper 1-MD-100 Mandrel Case 1-MD-200 Mandrel Case 1-MD-300 Mandrel Case 29 Mandrels 3/16" to 3" inclusive 29 Sets Roughing Stones 29 Sets Semi-finishing Stones Shipping Weight: 140 lbs.
24
TRK-1500 3/16" to 1-1/2" inclusive, consisting of: 1-MD-1 Mandrel Driver No. 2, 3, or 4 Morse Taper 1-MD-150 Mandrel Case 17 Mandrels 3/16" to 1-1/2" inclusive 17 Sets Roughing Stones 17 Sets Semi-finishing Stones Shipping Weight: 80 lbs. TRK-2000 3/16" to 2" inclusive, consisting of: 1-MD-1 Mandrel Driver No. 2, 3, or 4 Morse Taper 1-MD-100 Mandrel Case 1-MD-200 Mandrel Case 21 Mandrels 3/16" to 2" inclusive 21 Sets Roughing Stones 21 Sets Semi-finishing Stones Shipping Weight: 108 lbs. TRK-2001 1-1/8" to 2" inclusive, consisting of: 1-MD-201 Mandrel Case 6 Mandrels 1-1/8" to 2" inclusive 8 Sets Roughing Stones 8 Sets Semi-finishing Stones Shipping Weight: 35 lbs.
17612_Sticks_P21_30
7/20/05
10:02 AM
Page 25
Convert your Sunnen hone into a two stone honing machine with the W-1000 Adapter
The W-1000 converts a Sunnen machine to accept any brand of two stone mandrels rather than a single stone which Sunnen uses. In addition, Sunnen supplies a tiny abrasive stone along with a great number of other parts to comprise one mandrel assembly. All brands of two stone mandrel assemblies are made up of only two parts, the mandrel and two massive stones. See comparisons below. Example: To hone a 1-3/8" bore 10" long, you would require the following parts to do the job with a Sunnen hone: 1-3G-P28-1375WC Mandrel 3-P28 Stones 1-3G-P28 Tension Block 1-3G-P28 Wedge 1-3G-P28 Retainer Block 3-WC-D Guide Shoes
To hone the same bore with a two stone mandrel, all you would require is: 1-1-3/8" Mandrel 1-Set 1-3/8" Stones • Instant set up – without tools • Huge abrasive hones to do the work with extreme long life of honing stones • Only abrasives in contact with bore being honed, no metal contact with part • Parts with keymaps or ports are easily honed without special honing stones • No loose parts to wear out or lose, only the mandrel and stone set 25
17612_Sticks_P21_30
7/20/05
10:02 AM
Page 26
Superior – Tennessee Two Stone Hones Shop Guide
26
17612_Sticks_P21_30
7/20/05
10:02 AM
Page 27
Sunnen-Superior – Tennessee Hone
27
17612_Sticks_P21_30
7/20/05
10:02 AM
Page 28
Norton Diamond Hand Hones
Resinoid Diamond Hand Hones UPC Code # 730006 •
Size, Type and Specification 1/4 x 3/8 x 4 ASD220-R100B99-1/16 One Insert 1/16 x 1 x 3/8 One End
UPC Code # 730006 02240
Size, Type and Specification 1/4 x 3/8 x 4 ASD220/400-R100B99-1/16 Two Inserts 1/16 x 1 x 3/8 On Each End
The above are the two most common diamond hand hones used. We can supply specials.
For ASI-218, Sunnen & Superior Recommended Stone Sets
28
17612_Sticks_P21_30
7/20/05
10:02 AM
Page 29
Portable Hone Kits ASI General Purpose Shop Hones UPC Code
Model
01950 ASI-B 3/4" To 1-1/4"
The smallest of the ASI portable kits, yet as complete as its’ big brother. To do a variety of jobs in the 3/4" To 1-1/4" range. The kit contains the hone body, AB-121 drive shaft and a set of A1B and A2B stones. UPC Code
Replacement Stone Sets For ASI-B (3 per set) Stone
Range
01911
A1B
3/4" To 1"
01912
A2B
1" To 1-1/4"
Model
01951 ASI-C 1" To 2"
This kit, same as the B & D kit, comes complete, ready to go to work. It includes the hone body and the drive shaft, with four general purpose stone sets, A1CD, A2CD, A3CD and A4CD.
UPC Code
UPC Code #730006
Model
01952 ASI-D 1-1/2" To 2-1/2"
The contents of this kit are exactly like the C kit, except the honing body which is larger. If required, an A5CD and A6CD stone set is available on special order to extend the range to a full 3" capacity.
UPC Code #730006
Replacement Stone Sets For ASI-C (3 per set) Stone
Range
01913
A1CD
1" To 1-1/4"
01914
A2CD
1-1/4"" To 1-1/2"
01915
A3CD
1-1/2" To 1-3/4"
01916
A4CD
1-3/4" To 2"
UPC Code #730006
Replacement Stone Sets For ASI-D (3 per set) Stone
Range
01913
A1CD
1-1/2" To 1-3/4"
01914
A2CD
1-3/4" To 2"
01915
A3CD
2" To 2-1/4"
01916
A4CD
2-1/4" To 2-1/2"
01917
* A5CD
2-1/2" To 2-3/4"
01918
* A6CD
2-3/4" To 3"
* Available on special order
BCD-Hone Kit The BCD-Hone Kit includes one each of the ASIB, ASI-C and ASI-D kits shown above. The range of this kit is 3/4" through 2-1/2", with available oversize hones, A5CD and A6CD to expand the range to 3" if desired. All kits and replacement stones on this page are available from stock for immediate delivery.
29
17612_Sticks_P21_30
7/20/05
10:02 AM
Page 30
Portable Honing Devices Small Bore Honing Devices – 1/2" Through 3-1/2" Used in small engine repair, brake and engine cylinder work & glaze breaking and deburring. • Smallest I.D. hone available in industry • Flexible shaft • For thru or blind hole work • Use in any drill motor or drill press • Fully adjustable cutting tension • Two grit sizes available from our stock • Custom stones available in any grit size required for the job
S&S-Mini Standard Stone 1-1/8" Long UPC Code #730006
Size
Size Capacity
02001 02027 02028
S&S-Mini Hone S&S-Mini-F S&S-Mini-M
1/2" Through 2-1/4" Bores 1-1/8" Long , Fine Grit Replacement Stone (2 per set) 1-1/8" Long , Medium Grit Replacement Stone (2 per set)
S&S-Junior Standard Stone 1-1/8" Long UPC Code #730006
Size
Size Capacity
02000 02024 02025 02026 02018 02019 02020
S&S-Junior S&S-3/4-F S&S-3/4-M S&S-3/4-C S&S-1-1/8-F S&S-1-1/8-M S&S-1-1/8-C
3/4" Through 2-1/2" Bores 3/4" Long , Fine Grit Replacement Stones (3 per set) 3/4" Long , Medium Grit Replacement Stones (3 per set) 3/4" Long , Coarse Grit Replacement Stones (3 per set) 1-1/8" Long , Fine Grit Replacement Stones (3 per set) 1-1/8" Long , Medium Grit Replacement Stones (3 per set) 1-1/8" Long , Coarse Grit Replacement Stones (3 per set)
S&S-Middle Standard Stone 2" Long
30
UPC Code #730006
Size
Size Capacity
02003 02018 02019 02020 02021 02022 02023
S&S-Middle S&S-1-1/8-F S&S-1-1/8-M S&S-1-1/8-C S&S-2-F S&S-2-M S&S-2-C
1-1/4" Through 3-1/2" Bores 1-1/8" Long , Fine Grit Replacement Stones (3 per set) 1-1/8" Long , Medium Grit Replacement Stones (3 per set) 1-1/8" Long , Coarse Grit Replacement Stones (3 per set) 2" Long , Fine Grit Replacement Stones (3 per set) 2" Long , Medium Grit Replacement Stones (3 per set) 2" Long , Coarse Grit Replacement Stones (3 per set)
17612_Sticks_P31_40
7/20/05
10:09 AM
Page 31
Portable Honing Devices Medium And Large Bore Honing Devices 2" Through 10" Used in all types of bore refinishing, hydraulic cylinders, engine cylinders and any I.D. pipe or tubing which requires a honed finish. Excellent for deburring work in all kinds of machine shop applications. Precision sizing is available with knurled thumb screw adjustment.
Model S&S-Jumbo Capacity 2" Through 7" Available With Standard Stones In 3" Or 4" UPC Code #730006
Model
Size Capacity
02006 01999 02012 02013 02014 02015 02016 02017
S&S-Jumbo-3 S&S-Jumbo-4 S&S-3-F S&S-3-M S&S-3-C S&S-4-F S&S-4-M S&S-4-C
2" Through 7" 2" Through 7" 3" Long Fine Replacement Stone 3/Set 3" Long Medium Replacement Stone 3/Set 3" Long Coarse Replacement Stone 3/Set 4" Long Fine Replacement Stone 3/Set 4" Long Medium Replacement Stone 3/Set 4" Long Coarse Replacement Stone 3/Set
Both of the hones on this page are adjustable to provide constant pressure on the bore wall and to compensate for the hone stone wear.
Model S&S-Maxi-Jumbo Capacity 6" Through 10" Standard Stone Is 4" Long UPC Code #730006
Model
Size Capacity
02005 02012 02013 02014 02015 02016 02017
S&S-Maxi-Jumbo S&S-3-F S&S-3-M S&S-3-C S&S-4-F S&S-4-M S&S-4-C
6" Through 10" 3" Long Fine Replacement Stone 3/Set 3" Long Medium Replacement Stone 3/Set 3" Long Coarse Replacement Stone 3/Set 4" Long Fine Replacement Stone 3/Set 4" Long Medium Replacement Stone 3/Set 4" Long Coarse Replacement Stone 3/Set
31
17612_Sticks_P31_40
7/20/05
10:09 AM
Page 32
Hand Feed Portable Hone ASI-218 Ideal for occasional heavy duty portable honing. Range 3" Through 21"
Range Diameter In Inches 3 - 4-3/4 3-3/4 - 6-1/2 6-9 8 -12 11 - 15 14 - 18 17 - 21
UPC Code #730006 01922 01923 01924 01925 01926 01927
Single Stone Master Holder 4 Per Set ASI-400 ASI-500 ASI-600 ASI-700 ASI-800 ASI-900 ASI-140
UPC Code #730006 – – 01932 01933 01934 01935
Double Stone Master Holder 4 Per Set – – ASI-569 ASI-578 ASI-588 ASI-598 ASI-541
UPC Code #730006 – – 01940 01941 01942 01943
Holder Support Box Part Number – – ASI-A62 ASI-A82 ASI-A92 ASI-A43 ASI-A54
ASI-Portable Hone Accessories
Replacement Stone Sets 2-Stone And 2-Felt Wipers UPC Code #730006
Part Number
Grit Size
For Use On Material
UPC Code #730006
Part Number
Grit Size
For Use On Material
01976 01977 01979 01980 01978 • •
ASI-1 ASI-2 ASI-3 ASI-4 ASI-5 ASI-6 ASI-7
C80 Coarse C150 Med. C280 Fine C400 Ex/Fn C220 Med/Fn C600 Sup/Fn A80 Coarse
Cast Iron Cast Iron Cast Iron Cast Iron Cast Iron All Metals HD. Sleeves
• • • • • • •
ASI-8 ASI-9 ASI-10 ASI-11 ASI-12 ASI-13 ASI-14
A150 Med. A220 Med/Fn A280 Fine A80 Coarse A150 Med. A220 Med/Fn A280 FIne
HD. Sleeves HD. Sleeves HD. Sleeves Steel Steel Steel Steel
4-Stone Sets UPC Code #730006
Part Number
Grit Size
For Use On Material
UPC Code #730006
Part Number
Grit Size
For Use On Material
01981 01982 01984 01985 01983 • •
ASI-1S ASI-2S ASI-3S ASI-4S ASI-5S ASI-6S ASI-7S
C80 Coarse C150 Med. C280 Fine C400 Ex/Fn C220 Med/Fn C600 Sup/Fn A80 Coarse
Cast Iron Cast Iron Cast Iron Cast Iron Cast Iron All Metals HD. Sleeves
• • • • • • •
ASI-8S ASI-9S ASI-10S ASI-11S ASI-12S ASI-13S ASI-14S
A150 Med. A220 Med/Fn A280 Fine A80 Coarse A150 Med. A220 Med/Fn A280 FIne
HD. Sleeves HD. Sleeves HD. Sleeves Steel Steel Steel Steel
32
17612_Sticks_P31_40
7/20/05
10:09 AM
Page 33
Portable Honing Kits
UPC Code
Model
01954
ASI-218 Kit
Contents: • Honing body with yoke and pinion drive shaft. • One set ASI-400 stone holders. • One set ASI-5 stones and felts.
Range – 3" to 5" The ASI body and drive shaft are included in all honing kits. In the ASI-218 kit above, you get one set of stones and a set of stone holders.
UPC Code
Model
01956
“E” Kit
Contents: • Honing body with yoke and pinion drive shaft. • Two sizes of stone holder sets. • Six sets of honing stones. • Metal storage box
Range – 3" to 6-1/2" The above kit may be expanded to a capacity of 9" by the simple addition of an extra set of stone holders, ASI-600 and a holder support box ASI-A62. It is also possible to increase capacity to 12" in the same manner, both at a nominal cost.
UPC Code
Model
01957
“F” Kit
Contents: • Honing body with yoke and pinion drive shaft. • Five sizes of stone holder sets. • Three sizes of holder support boxes. • Six sets of honing stones. • Metal storage box
Range – 3" to 15" This kit may be expanded to 21" if required. Simply add the extra oversize stone holder sets and the appropriate support boxes to whatever size is desired. Above 15" with any individual tool or kit is recommended only with two stone master holders. All accessory items to expand capacity of any device are found on the previous page.
33
17612_Sticks_P31_40
7/20/05
10:10 AM
Page 34
Aligner™ Guided Sharpening Kits UPC Code
Model #
Grit Size
07250 07251
AKEF AKFC
X-FINE & FINE FINE & COARSE
Diamond Whetstones™ - Bench Models UPC Code
Model #
Grit Size
Diamond Area
07216 07217 07220 07221 07224 07225
W6FS W6CS W6FP W6CPS W8F W8C
FINE COARSE FINE COARSE FINE COARSE
6" x 2" 6" x 2" 6" x 2" 6" x 2" 8" x 2-5/8" 8" x 2-5/8"
Pocket Models UPC Code
Model #
Grit Size
Diamond Area
07103 07106 07107
W3C* W4F W4C
COARSE FINE COARSE
3-1/3" x 7/8" 4-1/3" x 7/8" 4-1/3" x 7/8"
Diafold™ Diamond Whetstone™ UPC Code
Model #
Grit Size
07151 07152 07157 07158
FWF FWC FMF FMC
FINE COARSE FINE COARSE
Diamond Area 4-1/3" 4-1/3" 4-1/3" 4-1/3"
x x x x
7/8" 7/8" 7/8" 7/8"
Diafold™ Sharpeners & Diafold™ Folding Files UPC Code
Model #
Grit Size
Diamond Area
07159 07160 07161 07162 07166 07167 07168
FSKF FSKC FFF FFC FRF* FRC* FHRF
FINE COARSE FINE COARSE FINE COARSE FINE
SERRATED SERRATED 4" LONG TAPER 4" LONG TAPER 1/4 ROUND ROD 1/4 ROUND ROD 1/4 HALF RD.
Diamond Mini-Sharp™ Sharpener UPC Code
Model #
Grit Size
07180 07181 07182 07183
F70E F70F F70C F70X
X-FINE FINE COARSE X-COARSE
Diamond Area 2-11/16 2-11/16 2-11/16 2-11/16
* Limited Quantities on items W3C, FRF and FRC
34
x x x x
15/16 15/16 15/16 15/16
17612_Sticks_P31_40
7/20/05
10:10 AM
Page 35
General Purpose Diamond Dressing Tools UPC Code # 730006
Diamond Section Size Shape
Tool Type & Number Multi-Point Nibs
Shank Diameter
Shank Length Under Head
1A
7/16"
3/4"
1A
7/16"
7/8"
2A
7/16"
7/8"
2A
7/16"
3/4"
1R
7/16"
1-1/2"
2R
7/16"
1-1/2"
S&S-60 02250
S&S-61 02252
S&S-62 02253
S&S-63 02254
S&S-64 02256
S&S-65 02258
Single Point Tools UPC Code # 730006
Tool Type & Number Multi-Point Nibs
Carat Weight
Shank Diameter
Shank Length
02260
S&S-2-3
1/4 (.25)
3/8"
2"
02261
S&S-2
1/4 (.25)
7/16"
2"
02262
S&S-3-3
1/3 (.33)
3/8"
2"
02263
S&S-3
1/3 (.33)
7/16"
2"
02264
S&S-5-3
1/2 (.50)
3/8"
2"
02265
S&S-5
1/2 (.50)
7/16"
2"
02267
S&S-7
3/4 (.75)
7/16"
2"
1 (1.00)
7/16"
2"
02269
S&S-10 Phono Point Tools
Included Angle
02270
S&S-PP-60
60˚
1/8"
1"
02271
S&S-PP-75
75˚
1/8"
1"
02272
S&S-PP-90
90˚
1/8"
1"
02273
S&S-RD
For Dressing
3/8"
2"
Radii of .015" Radius Tool 02280
S&S-HD Diamond Tool Holder
Through .025" 1-1/2" hollow shaft holder, for offhand truing and dressing using any tool with shank length from 3/4" to 9". The collett accepts only 7/16" diameter shank.
35
17612_Sticks_P31_40
7/20/05
10:10 AM
Page 36
Flex-Hone® Tool Block Cylinders or Liners
Brake Cylinders, Hydraulics & Valve Guides
Heavy-duty Flex Hones 3" thru 4-1/2" dia. are 13-1/2" OAL Bal. 17-1/2" OAL
8" OAL Part Number BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC
5 mm 5.5 mm 6.4 mm 7 mm 8 mm 9 mm 9.5 mm 10 mm 11 mm 12 mm 1/2" 14 mm 5/8" 18 mm 3/4" 20 mm 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-5/8" 1-3/4" 2" 2-1/4" 2-1/2" 2-3/4" 3"
(.197) (.217) (.250) (.276) (.315) (.354) (.375) (.394) (.433) (.472) (12.7 mm) (.552) (16 mm) (.709) (19 mm) (.787) (22 mm) (25.4 mm) (29 mm) (31.8 mm) (35 mm) (38 mm) (41 mm) (45 mm) (51 mm) (57 mm) (64 mm) (70 mm) (76 mm)
120SC 180SC
240SC
320SC
Part Number
• • • • • • • • • • 02057 • • • • • • 02072 • • • • • • • • • • •
• • • • 02052 • • • • • • • • • • • 02067 • 02079 02081 • • • • • • • • •
02046 • • • • • • • • • 02058 • • • 02068 • • • 02078 • • • • • • • • • •
GBD GBD GBD GBD GBD GBD GBD GBD GBD GBD GBD GBD GBD GBD
02045 02043 02047 02048 02051 02049 02050 02053 02044 02055 20256 02054 02062 02059 02064 02060 02066 02070 02077 02080 02082 02084 02088 02086 02090 02073 02098 02100 02102
Disc Brakes 5" OAL 1-1/2" 1-3/4" 2-1/8" 2-1/2" 2-3/4" 3-1/8"
(76 mm) (83 mm) (89 mm) (95 mm) (101 mm) (108 mm) (114 mm) (127 mm) (140 mm) (152 mm) (165 mm) (178 mm) (190 mm) (203 mm)
3" 3-1/4" 3-1/2" 3-3/4" 4" 4-1/4" 4-1/2" 5" 5-1/2" 6" 6-1/2" 7" 7-1/2" 8"
120SC 180SC (38 (48 (54 (64 (70 (79
mm) mm) mm) mm) mm) mm)
• • • • • •
• • 02094 02096 • •
240SC • • • • • •
Engine Block Cylinders 13-1/2" OAL
GB GB GB GB GB
36
3-1/4" 3-1/2" 3-3/4" 4-1/8" 4-5/8"
120SC 180SC (83 mm) (89 mm) (95 mm) (105 mm) (118 mm)
• • • • •
02103 02099 • • •
240SC
320SC
• • • • •
• • • • •
2-3/4" 3" 3" 3-1/4" 3-1/2" 3-3/4" 4" 4-1/2" 5" 5-1/2" 6 6-1/2" 7" 7-1/2"
• • • • • • • • • • • • • •
• • • • • • • • • • • • • •
• • • • • • • • • • • • • •
Heavy Duty Hex Shaft 34" OAL Part Number 3" Core (1/2" Hex-Shaft) GBDH GBD GBD GBD GBD
8" 8-1/2" 9" 9-1/2" 10"
(203 (216 (228 (241 (254
mm) mm) mm) mm) mm)
GBD GBD GBD GBD
10-1/2" (267 11" (280 11-1/2" (292 12" (305
mm) mm) mm) mm)
5" Core (5/8" Hex-Shaft) GBD GBD GBD GBD
12-1/2" (318 13" (330 13-1/2" (344 14" (355
mm) mm) mm) mm)
6" Core (5/8" Hex-Shaft) Part Number
to to to to to to to to to to to to to to
• = No UPC Code Assigned
4" Core (1/2" Hex-Shaft)
Part Number DBC DBC DBC DBC DBC DBC
3" 3-1/4" 3-1/2" 3-3/4" 4" 4-1/4" 4-1/2" 5" 5-1/2" 6" 6-1/2" 7" 7-1/2" 8"
For Bore Sizes 120SC 180SC 240SC
GBD GBD
15" 16"
(381 mm) (406 mm)
8" Core (5/8" Hex-Shaft) GBD GBD
17" 18"
(432 mm) (457 mm)
120SC 180SC 240SC • • • • •
• • • • •
• • • • •
120SC 180SC 240SC • • • •
• • • •
• • • •
120SC 180SC 240SC • • • •
• • • •
• • • •
120SC 180SC 240SC • •
• •
• •
120SC 180SC 240SC • •
• •
• •
17612_Sticks_P31_40
7/20/05
10:10 AM
Page 37
Flex-Hone® Tool Extra Heavy Duty Shafts 3/4" - 1-1/4"
Flex-Hone® Tool Accessories
Part Number
Drum Dia.
GBDX GBDX GBDX GBDX GBDX GBDX GBDX GBDX GBDX GBDX GBDX GBDX GBDX GBDX GBDX GBDX GBDX GBDX
11-1/2" 11-1/2" 11-1/2" 11-1/2" 15-1/2" 15-1/2" 15-1/2" 15-1/2" 19-1/2" 19-1/2" 19-1/2" 19-1/2" 19-1/2" 24-1/2" 24-1/2" 24-1/2" 24-1/2" 24-1/2"
19" 20" 21" 22" 23" 24" 25" 26" 27" 28" 29" 30" 31" 32" 33" 34" 35" 36"
(483mm) (508mm) (533mm) (559mm) (584mm) (610mm) (635mm) (660mm) (686mm) (711mm) (737mm) (762mm) (787mm) (813mm) (838mm) (864mm) (889mm) (914mm)
Section
No. of Sections on Drum
Shaft Dia.
Pipe Nipple Adapters
A B C D A B C D A B C D E A B C D E
22 22 22 22 29 29 29 29 36 36 36 36 36 44 44 44 44 44
3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4"
GBDX Replacement Sections Available for Above GBDX Flex-Hone® Tools
Stem Marking – Type of Abrasive SC –Silicon Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . no color (Recommended for ferrous metals) AO – Aluminum Oxide . . . . . . . . . . . . . . . . . . . . . . . . . black BC – Boron Carbide . . . . . . . . . . . . . . . . . . . . . . . . . . . gold WC – Tungsten Carbide . . . . . . . . . . . . . . . . . . . . . . . . tan Levigated Alumina (super fine) . . . . . . . . . . . . . green Z Grain – Zirconia Alumina . . . . . . . . . . . . . . . . . . . . . red
End Marking – Grit Size 20 (brown) 40 (purple) 60 (grey) 80 (orange)
120 (silver or no color) 180 (cardinal red) 240 (navy blue)
832A 18NPT 14NPT 38NPT 12NPT
Pipe Size
Flex-Hone Sizes
8-32 Adapters 1/8" NPT 1/4" NPT 3/8" NPT 1/2" NPT
7mm-1/2" 5/8"-3" 3"-5-1/2" 6"-8" 6"-12"
Extensions for use with pipe nipple adapters 18 x 18 18 x 36 14 x 18 14 x 36 Flex-Shaft
1/8" 1/8" 1/4" 1/4"
NPT NPT NPT NPT
x x x x
18" 36" 18" 36"
w/coupling w/coupling w/coupling w/coupling
for in chassis-engine on 3" to 45/8" FH diameters
FS
GBDX-A GBDX-B GBDX-C GBDX-D GBDX-E
14" OAL 6˚ Max Bend
Section Section Section Section Section
-
4-1/8" 4-5/8" 5-1/4" 5-3/4" 6-3/8"
(105mm) (118mm) (133mm) (146mm) (162mm)
Overall Trim Overall Trim Overall Trim Overall Trim Overall Trim
Instructions For Use The Flex-Hone Tool should be rotating upon entry and removal from cylinder. RPM from 1200 to 60 depending on diameter. Stroke from 30 to 200 per minute depending upon RPM. Average 350-500 RPM at 60120 strokes. Final stroking may be accelerated to develop 45˚ cross hatch. OEM high production needs experimentation with different mineral or water-soluble honing oils for optimum results. For convenience use a 10-30 wt. motor oil or our FlexHone Oil. Wash cylinder preferably with water, brush and detergent, then dry and oil. Experiment honing time from 10 to 45 seconds just sufficient to develop plateaued finish free from cut, torn and folded metal. Do not overhone. Ask for Honing Booklets availble at no charge.
320 (white) 400 (yellow) 600 (pink) 800 (light blue)
Abrasive Options Grit Types 20 40 60 80 120 180 240 320 SC = Silicon Carbide X X X X Standard Grits AO = Aluminum Oxide X X X X X X X X BC = Boron Carbide X X X X X X X X WC = Tungsten Carbide X X X X X X X X (100% or 50/50) Z = Alumina Zirconia X X X X X X (25 Z & 75 A) Finer Grits May Be Available On Request
37
17612_Sticks_P31_40
7/20/05
10:10 AM
Page 38
S&S Finishing Stick
The most innovative tool from the abrasive industry in forty years.
All tools and abrasive belts are color coded for instant identification of tool and abrasive belt grit size. Tool is available in three sizes.
1/4" x 6" Tools
1/2" x 8" Tools
3/4" x 10" Tools
UPC Code # 73006
Size, Color & Grit Size
UPC Code # 73006
Size, Color & Grit Size
UPC Code # 73006
Size, Color & Grit Size
02500 02501 02502 02503 02504 02505 02506
1/4" BROWN 40 Grit 1/4" GRAY 80 Grit 1/4" RED 120 Grit 1/4" BLUE 240 Grit 1/4" GREEN 320 Grit 1/4" YELLOW 400 Grit 1/4" BLACK 600 Grit
02600 02601 02602 02603 02604 02605 02606
1/2" BROWN 40 Grit 1/2" GRAY 80 Grit 1/2" RED 120 Grit 1/2" BLUE 240 Grit 1/2" GREEN 320 Grit 1/2" YELLOW 400 Grit 1/2" BLACK 600 Grit
02700 02701 02702 02703 02704 02705 02706
3/4" BROWN 40 Grit 3/4" GRAY 80 Grit 3/4" RED 120 Grit 3/4" BLUE 240 Grit 3/4" GREEN 320 Grit 3/4" YELLOW 400 Grit 3/4" BLACK 600 Grit
UPC Code # 73006
Belt & Grit Size
UPC Code # 73006
Belt & Grit Size
UPC Code # 73006
Belt & Grit Size
02510 02511 02512 02513 02514 02515 02516
1/4" 40 Grit 1/4" 80 Grit 1/4" 120 Grit 1/4" 240 Grit 1/4" 320 Grit 1/4" 400 Grit 1/4" 600 Grit
02610 02611 02612 02613 02614 02615 02616
1/2" 40 Grit 1/2" 80 Grit 1/2" 120 Grit 1/2" 240 Grit 1/2" 320 Grit 1/2" 400 Grit 1/2" 600 Grit
02710 02711 02712 02713 02714 02715 02716
3/4" 40 Grit 3/4" 80 Grit 3/4" 120 Grit 3/4" 240 Grit 3/4" 320 Grit 3/4" 400 Grit 3/4" 600 Grit
Replacement Belts
38
17612_Sticks_P31_40
7/20/05
10:10 AM
Page 39
Norton Pacesetter Mounted Points A Shapes The standard shank size is 1/8", 1/4" x 1-1/2" and 3/8 x 2". All coarse (CRS) grits are hard grade. All medium (M) and medium/tine (M/F) grits are medium grade.
A1
A2
A3
A4
A5
A6
A1
A12
A13
A14
A15
A21
A22
A23
A24
A25
A26
A31
A32
A33
A35
A38
A36
A39
A34
A37
UPC Code # 730006
Shape
Size
Spec
Spindle
Speed* RPM
04000 04001 04005 04006 04007 04010 04011 04015 04016 04020 04025 04026 04030 04031 04035 04037 04040 04043 04045 04047 04050 04053 04055 04057 04060 04063 04065 04067 04070 07073 04075 04077 04080 04083
A1 A1 A2 A3 A3 A4 A4 A5 A5 A6 A11 A11 A12 A12 A13 A14 A15 A21 A22 A23 A24 A25 A26 A31 A31 A32 A33 A34 A35 A36 A37 A38 A39 A40
3/4 x 2-1/2 3/4 x 2-1/2 1 x 1-1/4 1 x 2-3/4 1 x 2-3/4 1-1/4 x 1-1/4 1-1/4 x 1-1/4 3/4 x 1-1/8 3/4 x 1-1/8 3/4 x 1-1/8 7/8 x 2 7/8 x 2 11/16 x 1-1/4 11/16 x 1-1/4 1-1/8 x 1-1/8 11/16 x 7/8 1/4 x 1-1/16 1x1 3/4 x 5/8 3/4 x 1 1/4 x 3/4 1 5/8 1-3/8 x 1 1-3/8 x 1 1 x 5/8 1 x 1/2 1-1/2 x 3/8 1 x 3/8 1-5/8 x 3/8 1-1/4 x 1/4 1x1 3/4 x 3/4 3/4
38A CRS 38A M 38A M 38A CRS 38A M 38A CRS 38A M 38A CRS 38A M 38A M 38A CRS 38A M 38A CRS 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A CRS 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M
1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4
19,800 19,800 38,200 16,100 16,100 30,560 30,560 45,000 45,000 39,000 19,860 19,860 48,000 48,000 33,950 55,560 72,750 34,500 50,930 39,370 76,500 35,620 61,120 27,780 27,780 38,200 38,200 25,470 38,200 23,520 30,560 34,500 47,250 47,250
*Maximum Operating Speed based on 1/2" overhang.
A40
39
17612_Sticks_P31_40
7/20/05
10:10 AM
Page 40
Norton Pacesetter Mounted Points B Shapes The standard shank size is 1/8", 1/4" x 1-1/2" and 3/8 x 2". All coarse (CRS) grits are hard grade. All medium (M) and medium/fine (M/F) grits are medium grade.
B41
B42
B43
B44
B45
B46
B47
B51
B52
B53
B54
B55
B61
B62
B63
B64
B65
B70
B71
B72
B73
B74
B81
B82
B83
B84
B91
B92
B90
B93
UPC Code # 730006
Shape
Size
Spec
Spindle
Speed* RPM
04100 04101 04105 04106 04110 04113 04115 04117 04120 04125 04128 04127 04129 04140 04150 04155 04157 04158 04160 04162 04164 04166 04168 04170 04172 04174 04176 04178 04180 04182 04184 04186 04188 04189 04192 04194 04196
B41 B41 B42 B42 B43 B44 B45 B46 B47 B51 B52 B52 B52 B53 B54 B55 B61 B61 B62 B63 B64 B65 B70 B71 B72 B73 B74 B81 B82 B83 B84 B90 B91 B91 B92 B93 B94
5/8 x 5/8 5/8 x 5/8 1/2 x 3/4 1/2 x 3/4 1/4 x 5/16 7/32 x 3/8 3/16 x 5/16 1/8 x 5/16 1/8 x 5/32 7/16 x 3/4 3/8 x 3/4 3/8 x 3/4 3/8 x 3/4 5/16 x 5/8 1/4 x 1/2 1/8 x 1/4 3/4 x 5/16 3/4 x 5/16 1/2 x 3/8 1/4 x 3/16 1/4 x 1/16 1/8 x 1/8 3/4 x 1/8 5/8 x 3/32 1/2 x 1/8 1/2 x 3/32 7/32 x 3/32 3/4 x 3/16 1/2 x 1/4 3/8 x 3/16 5/16 x 3/16 1/2 x 1/2 1/2 x 5/8 1/2 x 5/8 1/4 x 1/4 3/16 x 3/16 1/64 x 3/32
38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M/F 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M
1/8 1/4 1/8 1/4 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/4 1/8 1/8 1/8 1/8 1/8 1/4 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/4 1/8 1/8 1/8
33,750 61,120 33,750 61,120 81,370 68,400 104,250 105,000 105,000 45,370 45,370 81,000 45,370 60,000 60,000 105,000 38,250 50,930 41,020 92,400 105,000 105,000 50,930 61,120 73,500 73,500 105,000 50,930 76,390 87,600 105,000 34,500 34,500 61,500 81,370 105,000 105,000
*Maximum Operating Speed based on 1/2" overhang. B94
40
17612_Sticks_P41_44
7/20/05
2:28 PM
Page 41
Norton Pacesetter Mounted Points B Shapes (continued) The standard shank size is 1/8", 1/4" x 1-1/2". All coarse (CRS) grits are hard grade. All medium (M) and medium/fine (M/F) grits are medium grade.
B95
B98
B103
B106
B113
B121
B124
B133
B96
B101
B104
B111
B114
B122
B131
B134
B97
B102
B105
B112
B115
B123
B132
B135
B136
UPC Code # 730006
Shape
Size
Spec
Spindle
Speed* RPM
04198
B95
1/8 x 3/16
38A M
1/8
105,000
04201
B96
1/8 x 1/4
38A M
1/8
105,000
04200
B96
1/8 x 1/4
38A M/F
1/8
105,000
04205
B97
1/8 x 3/8
38A M
1/8
105,000
04207
B98
3/32 x 1/4
38A M
1/8
105,000
04210
B101
5/8 x 11/16
38A M
1/8
33,750
04211
B101
5/8 x 11/16
38A M
1/4
61,120
04215
B102
5/8 x 1/2
38A M
1/8
45,370
04217
B103
5/8 x 3/16
38A M
1/8
61,120
04220
B104
5/16 x 3/8
38A M
1/8
68,400
04222
B105
1/4 x 1/4
38A M
1/8
104,250
04224
B106
1/8 x 7/64
38A M
1/8
105,000
04226
B111
7/16 x 11/16
38A M
1/8
33,750
04227
B111
7/16 x 11/16
38A M
1/4
66,000
04230
B112
3/8 x 1/2
38A M
1/8
45,370
04232
B113
1/4 x 1/4
38A M
1/8
81,370
04234
B114
7/32 x 3/8
38A M
1/8
68,400
04236
B115
3/32 x 1/8
38A M
1/8
105,000
04240
B121
1/2
38A M
1/8
45,370
04241
B121
1/2
38A M
1/4
76,390
04242
B121
1/2
38A M/F
1/8
45,370
04245
B122
3/8
38A M
1/8
61,650
04246
B122
3/8
38A M/F
1/8
61,650
04250
B123
3/16
38A M
1/8
104,250
04255
B124
1/8
38A M
1/8
105,000
04256
B124
1/8
38A M/F
1/8
105,000
04258
B131
1/2 x 1/2
38A M
1/8
34,500
04259
B131
1/2 x 1/2
38A M
1/4
61,500
04260
B131
1/2 x 1/2
38A M/F
1/8
34,500
04263
B132
3/8 x 1/2
38A M
1/8
45,370
04265
B133
3/8 x 3/8
38A M
1/8
54,000
04267
B134
5/16 x 3/8
38A M
1/8
61,650
04269
B135
1/4 x 1/2
38A M
1/8
60,000
04275
B136
1/4 x 5/16
38A M
1/8
77,250
*Maximum Operating Speed based on 1/2" overhang.
41
17612_Sticks_P41_44
7/20/05
2:28 PM
Page 42
Norton Pacesetter Mounted Points W Shapes The standard shank size is 1/8", 1/4" x 1-1/2" and 3/8 x 2". All coarse (CRS) grits are hard grade. All medium (M) and medium/fine (M/F) grits are medium grade.
T
D
T
D
T
D
T
D
UPC Code # 730006
Shape
Size
Spec
Spindle
Speed RPM
04300 04304 04303 04306 04310 04313 04314 04317 04318 04320 04322 04325 04327 04330 04332 04335 04337 04340 04343 04345 04347 04350 04352 04355 04357 04360 04363 04365 04367 04370 04373 04375 04377 04380 04383 04385 04387 04390 04393 04395 04397 04400 04401 04402 04406 04407 04410 04412 04415 04417 04420 04423 04425 04427 04428 04430 04433
W141 W142 W142 W143 W144 W145 W145 W146 W146 W149 W151 W152 W153 W154 W157 W158 W159 W160 W161 W162 W163 W164 W165 W166 W167 W168 W169 W170 W171 W172 W173 W174 W175 W176 W177 W178 W179 W181 W182 W183 W184 W185 W185 W185 W186 W186 W187 W188 W189 W190 W191 W192 W193 W194 W194 W195 W196
3/32 x 5/32 3/32 x 1/4 3/32 x 1/4 1/8 x 1/8 1/8 x 1/4 1/8 x 3/8 1/8 x 3/8 1/8 x 1/2 1/8 x 1/2 5/32 x 1/4 3/16 x 1/8 3/16 x 1/4 3/16 x 3/8 3/16 x 1/2 1/4 x 1/16 1/4 x 1/8 1/4 x 3/16 1/4 x 1/4 1/4 x 5/16 1/4 x 3/8 1/4 x 1/2 1/4 x 3/4 5/16 x 1/16 5/16 x 1/8 5/16 x 1/4 5/16 x 5/16 5/16 x 3/8 5/16 x 1/2 5/16 x 3/4 3/8 x 1/16 3/8 x 1/8 3/8 x 1/4 3/8 x 3/8 3/8 x 1/2 3/8 x 3/4 3/8 x 1 3/8 x 1-1/4 1/2 x 1/16 1/2 x 1/8 1/2 x 1/4 1/2 x 3/8 1/2 x 1/2 1/2 x 1/2 1/2 x 1/2 1/2 x 3/4 1/2 x 3/4 1/2 x 1 1/2 x 1-1/2 1/2 x 2 5/8 x 1/16 5/8 x 1/8 5/8 x 1/4 5/8 x 3/8 5/8 x 1/2 5/8 x 1/2 5/8 x 3/4 5/8 x 1
38A M 38A M 38A M/F 38A M 38A M 38A M 38A M/F 38A M 38A M/F 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M/F 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M 38A M
1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/4 1/8 1/8 1/4 1/8 1/4 1/4 1/8 1/8 1/8 1/8 1/8 1/4 1/8 1/4
105,000 105,000 105,000 105,000 105,000 105,000 105,000 105,000 105,000 105,000 105,000 105,000 80,850 70,500 123,000 105,000 92,400 81,370 77,250 68,400 60,000 45,900 107,400 96,970 75,000 68,400 61,650 52,500 37,120 99,370 87,600 69,000 54,000 45,370 33,750 26,250 18,750 76,390 73,500 51,750 41,020 34,500 61,500 34,500 26,250 51,000 20,620 30,370 24,000 61,120 58,870 43,120 32,250 29,400 56,400 22,120 35,250
*Maximum Operating Speed based on 1/2" overhang.
42
17612_Sticks_P41_44
7/20/05
2:28 PM
Page 43
Norton Pacesetter Mounted Points W Shapes (continued) The standard shank size is 1/8", 1/4" x 1-1/2" and 3/8 x 2". All coarse (CRS) grits are hard grade. All medium (M) and medium/fine (M/F) grits are medium grade.
T
D
T
D
T
D
T
D
UPC Code # 730006
Shape
04435 04437 04440 04443 04444 04447 04450 04453 04454 04457 04460 04463 04465 04467 04469 04472 04475 04477 04480 04483 04485 04491 04492 04495 04498 04500 04502 04505 04508 04509 04507 04512 04515 04517 04520 04523 04525 04527 04530 04533 04535 04537 04540 04543 04545 04547 04550 04553 04555 04557 04560 04563 04565 04567 04570
W197 W198 W199 W200 W200 W201 W202 W203 W203 W204 W205 W206 W207 W208 W209 W210 W211 W212 W213 W214 W215 W216 W216 W217 W218 W219 W220 W221 W222 W222 W222 W223 W224 W225 W226 W227 W228 W229 W230 W231 W232 W233 W234 W235 W236 W237 W238 W239 W240 W241 W242 W243 W244 W245 W246
Size
Spec
5/8 x 2 38A M 5/8 x 2-1/2 38A M 3/4 x 1/16 38A M 3/4 x 1/8 38A M 3/4 x 1/8 38A M/F 3/4 x 1/4 38A M 3/4 x 3/8 38A M 3/4 x 1/2 38A M 3/4 x 1/2 38A M 3/4 x 3/4 38A M 3/4 x 1 38A M 3/4 x 1-1/4 38A M 3/4 x 1-1/2 38A M 3/4 x 2 38A M 3/4 x 2-1/2 38A M 7/8 x 1/16 38A M 7/8 x 1/8 38A M 7/8 x 1/4 38A M 7/8 x 3/8 38A M 15/16 x 1/4 38A M 1 x 1/8 38A M 1 x 1/4 38A M 1 x 1/4 38A M 1 x 3/8 38A M 1 x 1/2 38A M 1 x 3/4 38A M 1x1 38A M 1 x 1-1/2 38A M 1x2 38A CRS 1x2 38A M 1x2 37C CRS 1 x 2-1/2 38A M 1x3 38A M 1-1/4 x 1/4 38A M 1-1/4 x 3/8 38A M 1-1/4 x 1/2 38A M 1-1/4 x 3/4 38A M 1-1/4 x 1 38A M 1-1/4 x 1-1/4 38A M 1-1/4 x 1-1/2 38A M 1-1/4 x 2 38A M 1-1/4 x 2-1/2 38A M 1-1/4 x 3 38A M 1-1/2 x 1/4 38A M 1-1/2 x 1/2 38A M 1-1/2 x 1 38A M 1-1/2 x 1-1/2 38A M 1-1/2 x 2 38A M 1-1/2 x 2-1/2 38A M 1-1/2 x 3 38A M 2x1 38A M 2 x 1-1/2 38A M 2x2 38A M 2 x 2-1/2 38A M 2x3 38A M
Spindle
Speed RPM
1/4 1/4 1/8 1/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 3/8 1/4 1/4 1/4 1/4 1/4 3/8 3/8 1/4 3/8 3/8 3/8 3/8
21,000 16,500 50,930 50,930 50,930 38,250 30,600 25,500 50,930 18,900 34,500 28,720 24,000 18,750 15,000 43,650 43,650 33,750 27,000 32,600 38,200 30,520 38,200 38,200 38,200 35,100 25,500 19,120 15,900 15,900 15,900 12,370 10,605 30,560 30,560 30,560 30,520 24,000 20,400 17,620 14,250 10,880 24,380 25,470 25,470 22,500 15,600 12,750 21,000 18,000 19,100 19,100 19,100 19,100 16,500
*Maximum Operating Speed based on 1/2" overhang.
43
17612_Sticks_P41_44
7/20/05
2:28 PM
Page 44
Effective August 1, 2005
Terms and Conditions Minimum Order:
All orders are subject to a minimum charge of $20.00. Any order entered having a net invoice value of less than $20.00 will be invoiced at $20.00.
Transportation:
Prepaid and assumed on orders with a net value of $1,500 per shipment. All others shipped collect or prepaid and added to the invoice.
Weights:
All catalog weights are approximate and are for guidance only.
Returned Goods:
Goods may not be returned without approval. Any return must be accompanied by a Returned Goods Authorization number (RGA #) furnished by sales dept.
Damaged Goods:
Damage must be reported immediately to carrier and claim filed at the distributor end. Hidden damage must be reported to us within five working days of receipt of goods.
Prices Are Subject To Change Without Notice
Sticks & Stones Unlimited, Inc. Distributed By:
44